License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
#include <linux/socket.h>
|
|
|
|
#include <linux/in.h>
|
|
|
|
#include <linux/in6.h>
|
|
|
|
#include <rdma/ib_verbs.h>
|
|
|
|
#include <rdma/rdma_cm.h>
|
2016-05-04 00:01:13 +08:00
|
|
|
#include <rdma/rw.h>
|
2015-12-09 20:12:03 +08:00
|
|
|
#include <scsi/iser.h>
|
|
|
|
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
|
2014-12-07 19:12:02 +08:00
|
|
|
#define DRV_NAME "isert"
|
|
|
|
#define PFX DRV_NAME ": "
|
|
|
|
|
|
|
|
#define isert_dbg(fmt, arg...) \
|
|
|
|
do { \
|
|
|
|
if (unlikely(isert_debug_level > 2)) \
|
|
|
|
printk(KERN_DEBUG PFX "%s: " fmt,\
|
|
|
|
__func__ , ## arg); \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
#define isert_warn(fmt, arg...) \
|
|
|
|
do { \
|
|
|
|
if (unlikely(isert_debug_level > 0)) \
|
|
|
|
pr_warn(PFX "%s: " fmt, \
|
|
|
|
__func__ , ## arg); \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
#define isert_info(fmt, arg...) \
|
|
|
|
do { \
|
|
|
|
if (unlikely(isert_debug_level > 1)) \
|
|
|
|
pr_info(PFX "%s: " fmt, \
|
|
|
|
__func__ , ## arg); \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
#define isert_err(fmt, arg...) \
|
|
|
|
pr_err(PFX "%s: " fmt, __func__ , ## arg)
|
|
|
|
|
2015-12-09 20:12:04 +08:00
|
|
|
/* Constant PDU lengths calculations */
|
|
|
|
#define ISER_HEADERS_LEN (sizeof(struct iser_ctrl) + \
|
|
|
|
sizeof(struct iscsi_hdr))
|
2016-02-25 01:24:04 +08:00
|
|
|
#define ISER_RX_PAYLOAD_SIZE (ISER_HEADERS_LEN + ISCSI_DEF_MAX_RECV_SEG_LEN)
|
2015-12-09 20:12:04 +08:00
|
|
|
|
|
|
|
/* QP settings */
|
|
|
|
/* Maximal bounds on received asynchronous PDUs */
|
|
|
|
#define ISERT_MAX_TX_MISC_PDUS 4 /* NOOP_IN(2) , ASYNC_EVENT(2) */
|
|
|
|
|
|
|
|
#define ISERT_MAX_RX_MISC_PDUS 6 /*
|
|
|
|
* NOOP_OUT(2), TEXT(1),
|
|
|
|
* SCSI_TMFUNC(2), LOGOUT(1)
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define ISCSI_DEF_XMIT_CMDS_MAX 128 /* from libiscsi.h, must be power of 2 */
|
|
|
|
|
|
|
|
#define ISERT_QP_MAX_RECV_DTOS (ISCSI_DEF_XMIT_CMDS_MAX)
|
|
|
|
|
|
|
|
#define ISERT_MIN_POSTED_RX (ISCSI_DEF_XMIT_CMDS_MAX >> 2)
|
|
|
|
|
2016-05-04 00:01:13 +08:00
|
|
|
#define ISERT_QP_MAX_REQ_DTOS (ISCSI_DEF_XMIT_CMDS_MAX + \
|
2015-12-09 20:12:04 +08:00
|
|
|
ISERT_MAX_TX_MISC_PDUS + \
|
|
|
|
ISERT_MAX_RX_MISC_PDUS)
|
|
|
|
|
2016-02-25 01:24:04 +08:00
|
|
|
#define ISER_RX_PAD_SIZE (ISCSI_DEF_MAX_RECV_SEG_LEN + 4096 - \
|
2016-02-25 01:24:06 +08:00
|
|
|
(ISER_RX_PAYLOAD_SIZE + sizeof(u64) + sizeof(struct ib_sge) + \
|
2017-03-22 23:07:30 +08:00
|
|
|
sizeof(struct ib_cqe) + sizeof(bool)))
|
2015-12-09 20:12:04 +08:00
|
|
|
|
2013-08-29 04:23:35 +08:00
|
|
|
#define ISCSI_ISER_SG_TABLESIZE 256
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
|
|
|
|
enum isert_desc_type {
|
|
|
|
ISCSI_TX_CONTROL,
|
|
|
|
ISCSI_TX_DATAIN
|
|
|
|
};
|
|
|
|
|
|
|
|
enum iser_conn_state {
|
|
|
|
ISER_CONN_INIT,
|
|
|
|
ISER_CONN_UP,
|
2016-02-25 01:23:59 +08:00
|
|
|
ISER_CONN_BOUND,
|
2014-12-02 22:57:20 +08:00
|
|
|
ISER_CONN_FULL_FEATURE,
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
ISER_CONN_TERMINATING,
|
|
|
|
ISER_CONN_DOWN,
|
|
|
|
};
|
|
|
|
|
|
|
|
struct iser_rx_desc {
|
2015-12-09 20:12:03 +08:00
|
|
|
struct iser_ctrl iser_header;
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
struct iscsi_hdr iscsi_header;
|
2016-02-25 01:24:04 +08:00
|
|
|
char data[ISCSI_DEF_MAX_RECV_SEG_LEN];
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
u64 dma_addr;
|
|
|
|
struct ib_sge rx_sg;
|
2016-02-25 01:24:06 +08:00
|
|
|
struct ib_cqe rx_cqe;
|
2017-03-22 23:07:30 +08:00
|
|
|
bool in_use;
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
char pad[ISER_RX_PAD_SIZE];
|
|
|
|
} __packed;
|
|
|
|
|
2016-02-25 01:24:06 +08:00
|
|
|
static inline struct iser_rx_desc *cqe_to_rx_desc(struct ib_cqe *cqe)
|
|
|
|
{
|
|
|
|
return container_of(cqe, struct iser_rx_desc, rx_cqe);
|
|
|
|
}
|
|
|
|
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
struct iser_tx_desc {
|
2015-12-09 20:12:03 +08:00
|
|
|
struct iser_ctrl iser_header;
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
struct iscsi_hdr iscsi_header;
|
|
|
|
enum isert_desc_type type;
|
|
|
|
u64 dma_addr;
|
|
|
|
struct ib_sge tx_sg[2];
|
2016-02-25 01:24:06 +08:00
|
|
|
struct ib_cqe tx_cqe;
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
int num_sge;
|
|
|
|
struct ib_send_wr send_wr;
|
|
|
|
} __packed;
|
|
|
|
|
2016-02-25 01:24:06 +08:00
|
|
|
static inline struct iser_tx_desc *cqe_to_tx_desc(struct ib_cqe *cqe)
|
|
|
|
{
|
|
|
|
return container_of(cqe, struct iser_tx_desc, tx_cqe);
|
|
|
|
}
|
|
|
|
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
struct isert_cmd {
|
|
|
|
uint32_t read_stag;
|
|
|
|
uint32_t write_stag;
|
|
|
|
uint64_t read_va;
|
|
|
|
uint64_t write_va;
|
2015-12-09 20:12:06 +08:00
|
|
|
uint32_t inv_rkey;
|
2013-07-04 10:39:37 +08:00
|
|
|
u64 pdu_buf_dma;
|
|
|
|
u32 pdu_buf_len;
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
struct isert_conn *conn;
|
2013-08-18 05:27:56 +08:00
|
|
|
struct iscsi_cmd *iscsi_cmd;
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
struct iser_tx_desc tx_desc;
|
2015-09-06 19:52:25 +08:00
|
|
|
struct iser_rx_desc *rx_desc;
|
2016-05-04 00:01:13 +08:00
|
|
|
struct rdma_rw_ctx rw;
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
struct work_struct comp_work;
|
2015-09-06 19:52:26 +08:00
|
|
|
struct scatterlist sg;
|
2017-11-29 02:28:07 +08:00
|
|
|
bool ctx_init_done;
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
};
|
|
|
|
|
2016-02-25 01:24:08 +08:00
|
|
|
static inline struct isert_cmd *tx_desc_to_cmd(struct iser_tx_desc *desc)
|
|
|
|
{
|
|
|
|
return container_of(desc, struct isert_cmd, tx_desc);
|
|
|
|
}
|
|
|
|
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
struct isert_device;
|
|
|
|
|
|
|
|
struct isert_conn {
|
|
|
|
enum iser_conn_state state;
|
|
|
|
u32 responder_resources;
|
|
|
|
u32 initiator_depth;
|
2014-12-02 22:57:35 +08:00
|
|
|
bool pi_support;
|
2016-02-25 01:24:05 +08:00
|
|
|
struct iser_rx_desc *login_req_buf;
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
char *login_rsp_buf;
|
|
|
|
u64 login_req_dma;
|
2014-12-02 22:57:21 +08:00
|
|
|
int login_req_len;
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
u64 login_rsp_dma;
|
2015-03-29 20:52:19 +08:00
|
|
|
struct iser_rx_desc *rx_descs;
|
2015-09-06 19:52:25 +08:00
|
|
|
struct ib_recv_wr rx_wr[ISERT_QP_MAX_RECV_DTOS];
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
struct iscsi_conn *conn;
|
2015-09-06 19:52:24 +08:00
|
|
|
struct list_head node;
|
2015-03-29 20:52:19 +08:00
|
|
|
struct completion login_comp;
|
2014-12-02 22:57:21 +08:00
|
|
|
struct completion login_req_comp;
|
2015-03-29 20:52:19 +08:00
|
|
|
struct iser_tx_desc login_tx_desc;
|
|
|
|
struct rdma_cm_id *cm_id;
|
|
|
|
struct ib_qp *qp;
|
|
|
|
struct isert_device *device;
|
|
|
|
struct mutex mutex;
|
|
|
|
struct kref kref;
|
2014-12-02 22:57:29 +08:00
|
|
|
struct work_struct release_work;
|
2014-12-07 19:12:01 +08:00
|
|
|
bool logout_posted;
|
2015-12-09 20:12:06 +08:00
|
|
|
bool snd_w_inv;
|
2016-08-29 19:45:49 +08:00
|
|
|
wait_queue_head_t rem_wait;
|
|
|
|
bool dev_removed;
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
#define ISERT_MAX_CQ 64
|
|
|
|
|
2014-12-02 22:57:40 +08:00
|
|
|
/**
|
|
|
|
* struct isert_comp - iSER completion context
|
|
|
|
*
|
|
|
|
* @device: pointer to device handle
|
2014-12-02 22:57:41 +08:00
|
|
|
* @cq: completion queue
|
2014-12-02 22:57:40 +08:00
|
|
|
* @active_qps: Number of active QPs attached
|
|
|
|
* to completion context
|
|
|
|
*/
|
|
|
|
struct isert_comp {
|
2014-12-02 22:57:41 +08:00
|
|
|
struct isert_device *device;
|
|
|
|
struct ib_cq *cq;
|
2014-12-02 22:57:40 +08:00
|
|
|
int active_qps;
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
struct isert_device {
|
2014-02-19 23:50:23 +08:00
|
|
|
bool pi_capable;
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
int refcount;
|
|
|
|
struct ib_device *ib_device;
|
2015-03-29 20:52:05 +08:00
|
|
|
struct ib_pd *pd;
|
2014-12-02 22:57:40 +08:00
|
|
|
struct isert_comp *comps;
|
|
|
|
int comps_used;
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
struct list_head dev_node;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct isert_np {
|
2014-12-02 22:57:27 +08:00
|
|
|
struct iscsi_np *np;
|
2015-09-06 19:52:23 +08:00
|
|
|
struct semaphore sem;
|
|
|
|
struct rdma_cm_id *cm_id;
|
|
|
|
struct mutex mutex;
|
2015-09-06 19:52:24 +08:00
|
|
|
struct list_head accepted;
|
|
|
|
struct list_head pending;
|
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 16:56:19 +08:00
|
|
|
};
|