uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints
Add uprobes support to the core kernel, with x86 support.
This commit adds the kernel facilities, the actual uprobes
user-space ABI and perf probe support comes in later commits.
General design:
Uprobes are maintained in an rb-tree indexed by inode and offset
(the offset here is from the start of the mapping). For a unique
(inode, offset) tuple, there can be at most one uprobe in the
rb-tree.
Since the (inode, offset) tuple identifies a unique uprobe, more
than one user may be interested in the same uprobe. This provides
the ability to connect multiple 'consumers' to the same uprobe.
Each consumer defines a handler and a filter (optional). The
'handler' is run every time the uprobe is hit, if it matches the
'filter' criteria.
The first consumer of a uprobe causes the breakpoint to be
inserted at the specified address and subsequent consumers are
appended to this list. On subsequent probes, the consumer gets
appended to the existing list of consumers. The breakpoint is
removed when the last consumer unregisters. For all other
unregisterations, the consumer is removed from the list of
consumers.
Given a inode, we get a list of the mms that have mapped the
inode. Do the actual registration if mm maps the page where a
probe needs to be inserted/removed.
We use a temporary list to walk through the vmas that map the
inode.
- The number of maps that map the inode, is not known before we
walk the rmap and keeps changing.
- extending vm_area_struct wasn't recommended, it's a
size-critical data structure.
- There can be more than one maps of the inode in the same mm.
We add callbacks to the mmap methods to keep an eye on text vmas
that are of interest to uprobes. When a vma of interest is mapped,
we insert the breakpoint at the right address.
Uprobe works by replacing the instruction at the address defined
by (inode, offset) with the arch specific breakpoint
instruction. We save a copy of the original instruction at the
uprobed address.
This is needed for:
a. executing the instruction out-of-line (xol).
b. instruction analysis for any subsequent fixups.
c. restoring the instruction back when the uprobe is unregistered.
We insert or delete a breakpoint instruction, and this
breakpoint instruction is assumed to be the smallest instruction
available on the platform. For fixed size instruction platforms
this is trivially true, for variable size instruction platforms
the breakpoint instruction is typically the smallest (often a
single byte).
Writing the instruction is done by COWing the page and changing
the instruction during the copy, this even though most platforms
allow atomic writes of the breakpoint instruction. This also
mirrors the behaviour of a ptrace() memory write to a PRIVATE
file map.
The core worker is derived from KSM's replace_page() logic.
In essence, similar to KSM:
a. allocate a new page and copy over contents of the page that
has the uprobed vaddr
b. modify the copy and insert the breakpoint at the required
address
c. switch the original page with the copy containing the
breakpoint
d. flush page tables.
replace_page() is being replicated here because of some minor
changes in the type of pages and also because Hugh Dickins had
plans to improve replace_page() for KSM specific work.
Instruction analysis on x86 is based on instruction decoder and
determines if an instruction can be probed and determines the
necessary fixups after singlestep. Instruction analysis is done
at probe insertion time so that we avoid having to repeat the
same analysis every time a probe is hit.
A lot of code here is due to the improvement/suggestions/inputs
from Peter Zijlstra.
Changelog:
(v10):
- Add code to clear REX.B prefix as suggested by Denys Vlasenko
and Masami Hiramatsu.
(v9):
- Use insn_offset_modrm as suggested by Masami Hiramatsu.
(v7):
Handle comments from Peter Zijlstra:
- Dont take reference to inode. (expect inode to uprobe_register to be sane).
- Use PTR_ERR to set the return value.
- No need to take reference to inode.
- use PTR_ERR to return error value.
- register and uprobe_unregister share code.
(v5):
- Modified del_consumer as per comments from Peter.
- Drop reference to inode before dropping reference to uprobe.
- Use i_size_read(inode) instead of inode->i_size.
- Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called.
- Includes errno.h as recommended by Stephen Rothwell to fix a build issue
on sparc defconfig
- Remove restrictions while unregistering.
- Earlier code leaked inode references under some conditions while
registering/unregistering.
- Continue the vma-rmap walk even if the intermediate vma doesnt
meet the requirements.
- Validate the vma found by find_vma before inserting/removing the
breakpoint
- Call del_consumer under mutex_lock.
- Use hash locks.
- Handle mremap.
- Introduce find_least_offset_node() instead of close match logic in
find_uprobe
- Uprobes no more depends on MM_OWNER; No reference to task_structs
while inserting/removing a probe.
- Uses read_mapping_page instead of grab_cache_page so that the pages
have valid content.
- pass NULL to get_user_pages for the task parameter.
- call SetPageUptodate on the new page allocated in write_opcode.
- fix leaking a reference to the new page under certain conditions.
- Include Instruction Decoder if Uprobes gets defined.
- Remove const attributes for instruction prefix arrays.
- Uses mm_context to know if the application is 32 bit.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Also-written-by: Jim Keniston <jkenisto@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com
[ Made various small edits to the commit log ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
|
|
|
#ifndef _LINUX_UPROBES_H
|
|
|
|
|
#define _LINUX_UPROBES_H
|
|
|
|
|
/*
|
2012-02-17 16:27:41 +08:00
|
|
|
* User-space Probes (UProbes)
|
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints
Add uprobes support to the core kernel, with x86 support.
This commit adds the kernel facilities, the actual uprobes
user-space ABI and perf probe support comes in later commits.
General design:
Uprobes are maintained in an rb-tree indexed by inode and offset
(the offset here is from the start of the mapping). For a unique
(inode, offset) tuple, there can be at most one uprobe in the
rb-tree.
Since the (inode, offset) tuple identifies a unique uprobe, more
than one user may be interested in the same uprobe. This provides
the ability to connect multiple 'consumers' to the same uprobe.
Each consumer defines a handler and a filter (optional). The
'handler' is run every time the uprobe is hit, if it matches the
'filter' criteria.
The first consumer of a uprobe causes the breakpoint to be
inserted at the specified address and subsequent consumers are
appended to this list. On subsequent probes, the consumer gets
appended to the existing list of consumers. The breakpoint is
removed when the last consumer unregisters. For all other
unregisterations, the consumer is removed from the list of
consumers.
Given a inode, we get a list of the mms that have mapped the
inode. Do the actual registration if mm maps the page where a
probe needs to be inserted/removed.
We use a temporary list to walk through the vmas that map the
inode.
- The number of maps that map the inode, is not known before we
walk the rmap and keeps changing.
- extending vm_area_struct wasn't recommended, it's a
size-critical data structure.
- There can be more than one maps of the inode in the same mm.
We add callbacks to the mmap methods to keep an eye on text vmas
that are of interest to uprobes. When a vma of interest is mapped,
we insert the breakpoint at the right address.
Uprobe works by replacing the instruction at the address defined
by (inode, offset) with the arch specific breakpoint
instruction. We save a copy of the original instruction at the
uprobed address.
This is needed for:
a. executing the instruction out-of-line (xol).
b. instruction analysis for any subsequent fixups.
c. restoring the instruction back when the uprobe is unregistered.
We insert or delete a breakpoint instruction, and this
breakpoint instruction is assumed to be the smallest instruction
available on the platform. For fixed size instruction platforms
this is trivially true, for variable size instruction platforms
the breakpoint instruction is typically the smallest (often a
single byte).
Writing the instruction is done by COWing the page and changing
the instruction during the copy, this even though most platforms
allow atomic writes of the breakpoint instruction. This also
mirrors the behaviour of a ptrace() memory write to a PRIVATE
file map.
The core worker is derived from KSM's replace_page() logic.
In essence, similar to KSM:
a. allocate a new page and copy over contents of the page that
has the uprobed vaddr
b. modify the copy and insert the breakpoint at the required
address
c. switch the original page with the copy containing the
breakpoint
d. flush page tables.
replace_page() is being replicated here because of some minor
changes in the type of pages and also because Hugh Dickins had
plans to improve replace_page() for KSM specific work.
Instruction analysis on x86 is based on instruction decoder and
determines if an instruction can be probed and determines the
necessary fixups after singlestep. Instruction analysis is done
at probe insertion time so that we avoid having to repeat the
same analysis every time a probe is hit.
A lot of code here is due to the improvement/suggestions/inputs
from Peter Zijlstra.
Changelog:
(v10):
- Add code to clear REX.B prefix as suggested by Denys Vlasenko
and Masami Hiramatsu.
(v9):
- Use insn_offset_modrm as suggested by Masami Hiramatsu.
(v7):
Handle comments from Peter Zijlstra:
- Dont take reference to inode. (expect inode to uprobe_register to be sane).
- Use PTR_ERR to set the return value.
- No need to take reference to inode.
- use PTR_ERR to return error value.
- register and uprobe_unregister share code.
(v5):
- Modified del_consumer as per comments from Peter.
- Drop reference to inode before dropping reference to uprobe.
- Use i_size_read(inode) instead of inode->i_size.
- Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called.
- Includes errno.h as recommended by Stephen Rothwell to fix a build issue
on sparc defconfig
- Remove restrictions while unregistering.
- Earlier code leaked inode references under some conditions while
registering/unregistering.
- Continue the vma-rmap walk even if the intermediate vma doesnt
meet the requirements.
- Validate the vma found by find_vma before inserting/removing the
breakpoint
- Call del_consumer under mutex_lock.
- Use hash locks.
- Handle mremap.
- Introduce find_least_offset_node() instead of close match logic in
find_uprobe
- Uprobes no more depends on MM_OWNER; No reference to task_structs
while inserting/removing a probe.
- Uses read_mapping_page instead of grab_cache_page so that the pages
have valid content.
- pass NULL to get_user_pages for the task parameter.
- call SetPageUptodate on the new page allocated in write_opcode.
- fix leaking a reference to the new page under certain conditions.
- Include Instruction Decoder if Uprobes gets defined.
- Remove const attributes for instruction prefix arrays.
- Uses mm_context to know if the application is 32 bit.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Also-written-by: Jim Keniston <jkenisto@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com
[ Made various small edits to the commit log ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
|
* (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
|
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
|
|
|
*
|
2012-02-22 18:37:29 +08:00
|
|
|
* Copyright (C) IBM Corporation, 2008-2012
|
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints
Add uprobes support to the core kernel, with x86 support.
This commit adds the kernel facilities, the actual uprobes
user-space ABI and perf probe support comes in later commits.
General design:
Uprobes are maintained in an rb-tree indexed by inode and offset
(the offset here is from the start of the mapping). For a unique
(inode, offset) tuple, there can be at most one uprobe in the
rb-tree.
Since the (inode, offset) tuple identifies a unique uprobe, more
than one user may be interested in the same uprobe. This provides
the ability to connect multiple 'consumers' to the same uprobe.
Each consumer defines a handler and a filter (optional). The
'handler' is run every time the uprobe is hit, if it matches the
'filter' criteria.
The first consumer of a uprobe causes the breakpoint to be
inserted at the specified address and subsequent consumers are
appended to this list. On subsequent probes, the consumer gets
appended to the existing list of consumers. The breakpoint is
removed when the last consumer unregisters. For all other
unregisterations, the consumer is removed from the list of
consumers.
Given a inode, we get a list of the mms that have mapped the
inode. Do the actual registration if mm maps the page where a
probe needs to be inserted/removed.
We use a temporary list to walk through the vmas that map the
inode.
- The number of maps that map the inode, is not known before we
walk the rmap and keeps changing.
- extending vm_area_struct wasn't recommended, it's a
size-critical data structure.
- There can be more than one maps of the inode in the same mm.
We add callbacks to the mmap methods to keep an eye on text vmas
that are of interest to uprobes. When a vma of interest is mapped,
we insert the breakpoint at the right address.
Uprobe works by replacing the instruction at the address defined
by (inode, offset) with the arch specific breakpoint
instruction. We save a copy of the original instruction at the
uprobed address.
This is needed for:
a. executing the instruction out-of-line (xol).
b. instruction analysis for any subsequent fixups.
c. restoring the instruction back when the uprobe is unregistered.
We insert or delete a breakpoint instruction, and this
breakpoint instruction is assumed to be the smallest instruction
available on the platform. For fixed size instruction platforms
this is trivially true, for variable size instruction platforms
the breakpoint instruction is typically the smallest (often a
single byte).
Writing the instruction is done by COWing the page and changing
the instruction during the copy, this even though most platforms
allow atomic writes of the breakpoint instruction. This also
mirrors the behaviour of a ptrace() memory write to a PRIVATE
file map.
The core worker is derived from KSM's replace_page() logic.
In essence, similar to KSM:
a. allocate a new page and copy over contents of the page that
has the uprobed vaddr
b. modify the copy and insert the breakpoint at the required
address
c. switch the original page with the copy containing the
breakpoint
d. flush page tables.
replace_page() is being replicated here because of some minor
changes in the type of pages and also because Hugh Dickins had
plans to improve replace_page() for KSM specific work.
Instruction analysis on x86 is based on instruction decoder and
determines if an instruction can be probed and determines the
necessary fixups after singlestep. Instruction analysis is done
at probe insertion time so that we avoid having to repeat the
same analysis every time a probe is hit.
A lot of code here is due to the improvement/suggestions/inputs
from Peter Zijlstra.
Changelog:
(v10):
- Add code to clear REX.B prefix as suggested by Denys Vlasenko
and Masami Hiramatsu.
(v9):
- Use insn_offset_modrm as suggested by Masami Hiramatsu.
(v7):
Handle comments from Peter Zijlstra:
- Dont take reference to inode. (expect inode to uprobe_register to be sane).
- Use PTR_ERR to set the return value.
- No need to take reference to inode.
- use PTR_ERR to return error value.
- register and uprobe_unregister share code.
(v5):
- Modified del_consumer as per comments from Peter.
- Drop reference to inode before dropping reference to uprobe.
- Use i_size_read(inode) instead of inode->i_size.
- Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called.
- Includes errno.h as recommended by Stephen Rothwell to fix a build issue
on sparc defconfig
- Remove restrictions while unregistering.
- Earlier code leaked inode references under some conditions while
registering/unregistering.
- Continue the vma-rmap walk even if the intermediate vma doesnt
meet the requirements.
- Validate the vma found by find_vma before inserting/removing the
breakpoint
- Call del_consumer under mutex_lock.
- Use hash locks.
- Handle mremap.
- Introduce find_least_offset_node() instead of close match logic in
find_uprobe
- Uprobes no more depends on MM_OWNER; No reference to task_structs
while inserting/removing a probe.
- Uses read_mapping_page instead of grab_cache_page so that the pages
have valid content.
- pass NULL to get_user_pages for the task parameter.
- call SetPageUptodate on the new page allocated in write_opcode.
- fix leaking a reference to the new page under certain conditions.
- Include Instruction Decoder if Uprobes gets defined.
- Remove const attributes for instruction prefix arrays.
- Uses mm_context to know if the application is 32 bit.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Also-written-by: Jim Keniston <jkenisto@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com
[ Made various small edits to the commit log ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
|
|
|
* Authors:
|
|
|
|
|
* Srikar Dronamraju
|
|
|
|
|
* Jim Keniston
|
2015-11-16 18:08:45 +08:00
|
|
|
* Copyright (C) 2011-2012 Red Hat, Inc., Peter Zijlstra
|
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints
Add uprobes support to the core kernel, with x86 support.
This commit adds the kernel facilities, the actual uprobes
user-space ABI and perf probe support comes in later commits.
General design:
Uprobes are maintained in an rb-tree indexed by inode and offset
(the offset here is from the start of the mapping). For a unique
(inode, offset) tuple, there can be at most one uprobe in the
rb-tree.
Since the (inode, offset) tuple identifies a unique uprobe, more
than one user may be interested in the same uprobe. This provides
the ability to connect multiple 'consumers' to the same uprobe.
Each consumer defines a handler and a filter (optional). The
'handler' is run every time the uprobe is hit, if it matches the
'filter' criteria.
The first consumer of a uprobe causes the breakpoint to be
inserted at the specified address and subsequent consumers are
appended to this list. On subsequent probes, the consumer gets
appended to the existing list of consumers. The breakpoint is
removed when the last consumer unregisters. For all other
unregisterations, the consumer is removed from the list of
consumers.
Given a inode, we get a list of the mms that have mapped the
inode. Do the actual registration if mm maps the page where a
probe needs to be inserted/removed.
We use a temporary list to walk through the vmas that map the
inode.
- The number of maps that map the inode, is not known before we
walk the rmap and keeps changing.
- extending vm_area_struct wasn't recommended, it's a
size-critical data structure.
- There can be more than one maps of the inode in the same mm.
We add callbacks to the mmap methods to keep an eye on text vmas
that are of interest to uprobes. When a vma of interest is mapped,
we insert the breakpoint at the right address.
Uprobe works by replacing the instruction at the address defined
by (inode, offset) with the arch specific breakpoint
instruction. We save a copy of the original instruction at the
uprobed address.
This is needed for:
a. executing the instruction out-of-line (xol).
b. instruction analysis for any subsequent fixups.
c. restoring the instruction back when the uprobe is unregistered.
We insert or delete a breakpoint instruction, and this
breakpoint instruction is assumed to be the smallest instruction
available on the platform. For fixed size instruction platforms
this is trivially true, for variable size instruction platforms
the breakpoint instruction is typically the smallest (often a
single byte).
Writing the instruction is done by COWing the page and changing
the instruction during the copy, this even though most platforms
allow atomic writes of the breakpoint instruction. This also
mirrors the behaviour of a ptrace() memory write to a PRIVATE
file map.
The core worker is derived from KSM's replace_page() logic.
In essence, similar to KSM:
a. allocate a new page and copy over contents of the page that
has the uprobed vaddr
b. modify the copy and insert the breakpoint at the required
address
c. switch the original page with the copy containing the
breakpoint
d. flush page tables.
replace_page() is being replicated here because of some minor
changes in the type of pages and also because Hugh Dickins had
plans to improve replace_page() for KSM specific work.
Instruction analysis on x86 is based on instruction decoder and
determines if an instruction can be probed and determines the
necessary fixups after singlestep. Instruction analysis is done
at probe insertion time so that we avoid having to repeat the
same analysis every time a probe is hit.
A lot of code here is due to the improvement/suggestions/inputs
from Peter Zijlstra.
Changelog:
(v10):
- Add code to clear REX.B prefix as suggested by Denys Vlasenko
and Masami Hiramatsu.
(v9):
- Use insn_offset_modrm as suggested by Masami Hiramatsu.
(v7):
Handle comments from Peter Zijlstra:
- Dont take reference to inode. (expect inode to uprobe_register to be sane).
- Use PTR_ERR to set the return value.
- No need to take reference to inode.
- use PTR_ERR to return error value.
- register and uprobe_unregister share code.
(v5):
- Modified del_consumer as per comments from Peter.
- Drop reference to inode before dropping reference to uprobe.
- Use i_size_read(inode) instead of inode->i_size.
- Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called.
- Includes errno.h as recommended by Stephen Rothwell to fix a build issue
on sparc defconfig
- Remove restrictions while unregistering.
- Earlier code leaked inode references under some conditions while
registering/unregistering.
- Continue the vma-rmap walk even if the intermediate vma doesnt
meet the requirements.
- Validate the vma found by find_vma before inserting/removing the
breakpoint
- Call del_consumer under mutex_lock.
- Use hash locks.
- Handle mremap.
- Introduce find_least_offset_node() instead of close match logic in
find_uprobe
- Uprobes no more depends on MM_OWNER; No reference to task_structs
while inserting/removing a probe.
- Uses read_mapping_page instead of grab_cache_page so that the pages
have valid content.
- pass NULL to get_user_pages for the task parameter.
- call SetPageUptodate on the new page allocated in write_opcode.
- fix leaking a reference to the new page under certain conditions.
- Include Instruction Decoder if Uprobes gets defined.
- Remove const attributes for instruction prefix arrays.
- Uses mm_context to know if the application is 32 bit.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Also-written-by: Jim Keniston <jkenisto@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com
[ Made various small edits to the commit log ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <linux/errno.h>
|
|
|
|
|
#include <linux/rbtree.h>
|
2013-11-09 01:52:21 +08:00
|
|
|
#include <linux/types.h>
|
2016-10-13 12:36:13 +08:00
|
|
|
#include <linux/wait.h>
|
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints
Add uprobes support to the core kernel, with x86 support.
This commit adds the kernel facilities, the actual uprobes
user-space ABI and perf probe support comes in later commits.
General design:
Uprobes are maintained in an rb-tree indexed by inode and offset
(the offset here is from the start of the mapping). For a unique
(inode, offset) tuple, there can be at most one uprobe in the
rb-tree.
Since the (inode, offset) tuple identifies a unique uprobe, more
than one user may be interested in the same uprobe. This provides
the ability to connect multiple 'consumers' to the same uprobe.
Each consumer defines a handler and a filter (optional). The
'handler' is run every time the uprobe is hit, if it matches the
'filter' criteria.
The first consumer of a uprobe causes the breakpoint to be
inserted at the specified address and subsequent consumers are
appended to this list. On subsequent probes, the consumer gets
appended to the existing list of consumers. The breakpoint is
removed when the last consumer unregisters. For all other
unregisterations, the consumer is removed from the list of
consumers.
Given a inode, we get a list of the mms that have mapped the
inode. Do the actual registration if mm maps the page where a
probe needs to be inserted/removed.
We use a temporary list to walk through the vmas that map the
inode.
- The number of maps that map the inode, is not known before we
walk the rmap and keeps changing.
- extending vm_area_struct wasn't recommended, it's a
size-critical data structure.
- There can be more than one maps of the inode in the same mm.
We add callbacks to the mmap methods to keep an eye on text vmas
that are of interest to uprobes. When a vma of interest is mapped,
we insert the breakpoint at the right address.
Uprobe works by replacing the instruction at the address defined
by (inode, offset) with the arch specific breakpoint
instruction. We save a copy of the original instruction at the
uprobed address.
This is needed for:
a. executing the instruction out-of-line (xol).
b. instruction analysis for any subsequent fixups.
c. restoring the instruction back when the uprobe is unregistered.
We insert or delete a breakpoint instruction, and this
breakpoint instruction is assumed to be the smallest instruction
available on the platform. For fixed size instruction platforms
this is trivially true, for variable size instruction platforms
the breakpoint instruction is typically the smallest (often a
single byte).
Writing the instruction is done by COWing the page and changing
the instruction during the copy, this even though most platforms
allow atomic writes of the breakpoint instruction. This also
mirrors the behaviour of a ptrace() memory write to a PRIVATE
file map.
The core worker is derived from KSM's replace_page() logic.
In essence, similar to KSM:
a. allocate a new page and copy over contents of the page that
has the uprobed vaddr
b. modify the copy and insert the breakpoint at the required
address
c. switch the original page with the copy containing the
breakpoint
d. flush page tables.
replace_page() is being replicated here because of some minor
changes in the type of pages and also because Hugh Dickins had
plans to improve replace_page() for KSM specific work.
Instruction analysis on x86 is based on instruction decoder and
determines if an instruction can be probed and determines the
necessary fixups after singlestep. Instruction analysis is done
at probe insertion time so that we avoid having to repeat the
same analysis every time a probe is hit.
A lot of code here is due to the improvement/suggestions/inputs
from Peter Zijlstra.
Changelog:
(v10):
- Add code to clear REX.B prefix as suggested by Denys Vlasenko
and Masami Hiramatsu.
(v9):
- Use insn_offset_modrm as suggested by Masami Hiramatsu.
(v7):
Handle comments from Peter Zijlstra:
- Dont take reference to inode. (expect inode to uprobe_register to be sane).
- Use PTR_ERR to set the return value.
- No need to take reference to inode.
- use PTR_ERR to return error value.
- register and uprobe_unregister share code.
(v5):
- Modified del_consumer as per comments from Peter.
- Drop reference to inode before dropping reference to uprobe.
- Use i_size_read(inode) instead of inode->i_size.
- Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called.
- Includes errno.h as recommended by Stephen Rothwell to fix a build issue
on sparc defconfig
- Remove restrictions while unregistering.
- Earlier code leaked inode references under some conditions while
registering/unregistering.
- Continue the vma-rmap walk even if the intermediate vma doesnt
meet the requirements.
- Validate the vma found by find_vma before inserting/removing the
breakpoint
- Call del_consumer under mutex_lock.
- Use hash locks.
- Handle mremap.
- Introduce find_least_offset_node() instead of close match logic in
find_uprobe
- Uprobes no more depends on MM_OWNER; No reference to task_structs
while inserting/removing a probe.
- Uses read_mapping_page instead of grab_cache_page so that the pages
have valid content.
- pass NULL to get_user_pages for the task parameter.
- call SetPageUptodate on the new page allocated in write_opcode.
- fix leaking a reference to the new page under certain conditions.
- Include Instruction Decoder if Uprobes gets defined.
- Remove const attributes for instruction prefix arrays.
- Uses mm_context to know if the application is 32 bit.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Also-written-by: Jim Keniston <jkenisto@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com
[ Made various small edits to the commit log ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
|
|
|
|
|
|
|
|
struct vm_area_struct;
|
2012-03-31 02:26:31 +08:00
|
|
|
struct mm_struct;
|
|
|
|
|
struct inode;
|
2013-10-16 05:04:16 +08:00
|
|
|
struct notifier_block;
|
2014-04-29 11:20:52 +08:00
|
|
|
struct page;
|
uprobes/core: Handle breakpoint and singlestep exceptions
Uprobes uses exception notifiers to get to know if a thread hit
a breakpoint or a singlestep exception.
When a thread hits a uprobe or is singlestepping post a uprobe
hit, the uprobe exception notifier sets its TIF_UPROBE bit,
which will then be checked on its return to userspace path
(do_notify_resume() ->uprobe_notify_resume()), where the
consumers handlers are run (in task context) based on the
defined filters.
Uprobe hits are thread specific and hence we need to maintain
information about if a task hit a uprobe, what uprobe was hit,
the slot where the original instruction was copied for xol so
that it can be singlestepped with appropriate fixups.
In some cases, special care is needed for instructions that are
executed out of line (xol). These are architecture specific
artefacts, such as handling RIP relative instructions on x86_64.
Since the instruction at which the uprobe was inserted is
executed out of line, architecture specific fixups are added so
that the thread continues normal execution in the presence of a
uprobe.
Postpone the signals until we execute the probed insn.
post_xol() path does a recalc_sigpending() before return to
user-mode, this ensures the signal can't be lost.
Uprobes relies on DIE_DEBUG notification to notify if a
singlestep is complete.
Adds x86 specific uprobe exception notifiers and appropriate
hooks needed to determine a uprobe hit and subsequent post
processing.
Add requisite x86 fixups for xol for uprobes. Specific cases
needing fixups include relative jumps (x86_64), calls, etc.
Where possible, we check and skip singlestepping the
breakpointed instructions. For now we skip single byte as well
as few multibyte nop instructions. However this can be extended
to other instructions too.
Credits to Oleg Nesterov for suggestions/patches related to
signal, breakpoint, singlestep handling code.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com
[ Performed various cleanliness edits ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
|
|
|
|
2012-12-30 00:49:11 +08:00
|
|
|
#define UPROBE_HANDLER_REMOVE 1
|
|
|
|
|
#define UPROBE_HANDLER_MASK 1
|
|
|
|
|
|
2013-04-04 00:00:37 +08:00
|
|
|
#define MAX_URETPROBE_DEPTH 64
|
|
|
|
|
|
2012-12-29 00:58:38 +08:00
|
|
|
enum uprobe_filter_ctx {
|
|
|
|
|
UPROBE_FILTER_REGISTER,
|
|
|
|
|
UPROBE_FILTER_UNREGISTER,
|
|
|
|
|
UPROBE_FILTER_MMAP,
|
|
|
|
|
};
|
|
|
|
|
|
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints
Add uprobes support to the core kernel, with x86 support.
This commit adds the kernel facilities, the actual uprobes
user-space ABI and perf probe support comes in later commits.
General design:
Uprobes are maintained in an rb-tree indexed by inode and offset
(the offset here is from the start of the mapping). For a unique
(inode, offset) tuple, there can be at most one uprobe in the
rb-tree.
Since the (inode, offset) tuple identifies a unique uprobe, more
than one user may be interested in the same uprobe. This provides
the ability to connect multiple 'consumers' to the same uprobe.
Each consumer defines a handler and a filter (optional). The
'handler' is run every time the uprobe is hit, if it matches the
'filter' criteria.
The first consumer of a uprobe causes the breakpoint to be
inserted at the specified address and subsequent consumers are
appended to this list. On subsequent probes, the consumer gets
appended to the existing list of consumers. The breakpoint is
removed when the last consumer unregisters. For all other
unregisterations, the consumer is removed from the list of
consumers.
Given a inode, we get a list of the mms that have mapped the
inode. Do the actual registration if mm maps the page where a
probe needs to be inserted/removed.
We use a temporary list to walk through the vmas that map the
inode.
- The number of maps that map the inode, is not known before we
walk the rmap and keeps changing.
- extending vm_area_struct wasn't recommended, it's a
size-critical data structure.
- There can be more than one maps of the inode in the same mm.
We add callbacks to the mmap methods to keep an eye on text vmas
that are of interest to uprobes. When a vma of interest is mapped,
we insert the breakpoint at the right address.
Uprobe works by replacing the instruction at the address defined
by (inode, offset) with the arch specific breakpoint
instruction. We save a copy of the original instruction at the
uprobed address.
This is needed for:
a. executing the instruction out-of-line (xol).
b. instruction analysis for any subsequent fixups.
c. restoring the instruction back when the uprobe is unregistered.
We insert or delete a breakpoint instruction, and this
breakpoint instruction is assumed to be the smallest instruction
available on the platform. For fixed size instruction platforms
this is trivially true, for variable size instruction platforms
the breakpoint instruction is typically the smallest (often a
single byte).
Writing the instruction is done by COWing the page and changing
the instruction during the copy, this even though most platforms
allow atomic writes of the breakpoint instruction. This also
mirrors the behaviour of a ptrace() memory write to a PRIVATE
file map.
The core worker is derived from KSM's replace_page() logic.
In essence, similar to KSM:
a. allocate a new page and copy over contents of the page that
has the uprobed vaddr
b. modify the copy and insert the breakpoint at the required
address
c. switch the original page with the copy containing the
breakpoint
d. flush page tables.
replace_page() is being replicated here because of some minor
changes in the type of pages and also because Hugh Dickins had
plans to improve replace_page() for KSM specific work.
Instruction analysis on x86 is based on instruction decoder and
determines if an instruction can be probed and determines the
necessary fixups after singlestep. Instruction analysis is done
at probe insertion time so that we avoid having to repeat the
same analysis every time a probe is hit.
A lot of code here is due to the improvement/suggestions/inputs
from Peter Zijlstra.
Changelog:
(v10):
- Add code to clear REX.B prefix as suggested by Denys Vlasenko
and Masami Hiramatsu.
(v9):
- Use insn_offset_modrm as suggested by Masami Hiramatsu.
(v7):
Handle comments from Peter Zijlstra:
- Dont take reference to inode. (expect inode to uprobe_register to be sane).
- Use PTR_ERR to set the return value.
- No need to take reference to inode.
- use PTR_ERR to return error value.
- register and uprobe_unregister share code.
(v5):
- Modified del_consumer as per comments from Peter.
- Drop reference to inode before dropping reference to uprobe.
- Use i_size_read(inode) instead of inode->i_size.
- Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called.
- Includes errno.h as recommended by Stephen Rothwell to fix a build issue
on sparc defconfig
- Remove restrictions while unregistering.
- Earlier code leaked inode references under some conditions while
registering/unregistering.
- Continue the vma-rmap walk even if the intermediate vma doesnt
meet the requirements.
- Validate the vma found by find_vma before inserting/removing the
breakpoint
- Call del_consumer under mutex_lock.
- Use hash locks.
- Handle mremap.
- Introduce find_least_offset_node() instead of close match logic in
find_uprobe
- Uprobes no more depends on MM_OWNER; No reference to task_structs
while inserting/removing a probe.
- Uses read_mapping_page instead of grab_cache_page so that the pages
have valid content.
- pass NULL to get_user_pages for the task parameter.
- call SetPageUptodate on the new page allocated in write_opcode.
- fix leaking a reference to the new page under certain conditions.
- Include Instruction Decoder if Uprobes gets defined.
- Remove const attributes for instruction prefix arrays.
- Uses mm_context to know if the application is 32 bit.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Also-written-by: Jim Keniston <jkenisto@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com
[ Made various small edits to the commit log ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
|
|
|
struct uprobe_consumer {
|
|
|
|
|
int (*handler)(struct uprobe_consumer *self, struct pt_regs *regs);
|
2013-04-04 00:00:31 +08:00
|
|
|
int (*ret_handler)(struct uprobe_consumer *self,
|
|
|
|
|
unsigned long func,
|
|
|
|
|
struct pt_regs *regs);
|
2012-12-29 00:58:38 +08:00
|
|
|
bool (*filter)(struct uprobe_consumer *self,
|
|
|
|
|
enum uprobe_filter_ctx ctx,
|
|
|
|
|
struct mm_struct *mm);
|
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints
Add uprobes support to the core kernel, with x86 support.
This commit adds the kernel facilities, the actual uprobes
user-space ABI and perf probe support comes in later commits.
General design:
Uprobes are maintained in an rb-tree indexed by inode and offset
(the offset here is from the start of the mapping). For a unique
(inode, offset) tuple, there can be at most one uprobe in the
rb-tree.
Since the (inode, offset) tuple identifies a unique uprobe, more
than one user may be interested in the same uprobe. This provides
the ability to connect multiple 'consumers' to the same uprobe.
Each consumer defines a handler and a filter (optional). The
'handler' is run every time the uprobe is hit, if it matches the
'filter' criteria.
The first consumer of a uprobe causes the breakpoint to be
inserted at the specified address and subsequent consumers are
appended to this list. On subsequent probes, the consumer gets
appended to the existing list of consumers. The breakpoint is
removed when the last consumer unregisters. For all other
unregisterations, the consumer is removed from the list of
consumers.
Given a inode, we get a list of the mms that have mapped the
inode. Do the actual registration if mm maps the page where a
probe needs to be inserted/removed.
We use a temporary list to walk through the vmas that map the
inode.
- The number of maps that map the inode, is not known before we
walk the rmap and keeps changing.
- extending vm_area_struct wasn't recommended, it's a
size-critical data structure.
- There can be more than one maps of the inode in the same mm.
We add callbacks to the mmap methods to keep an eye on text vmas
that are of interest to uprobes. When a vma of interest is mapped,
we insert the breakpoint at the right address.
Uprobe works by replacing the instruction at the address defined
by (inode, offset) with the arch specific breakpoint
instruction. We save a copy of the original instruction at the
uprobed address.
This is needed for:
a. executing the instruction out-of-line (xol).
b. instruction analysis for any subsequent fixups.
c. restoring the instruction back when the uprobe is unregistered.
We insert or delete a breakpoint instruction, and this
breakpoint instruction is assumed to be the smallest instruction
available on the platform. For fixed size instruction platforms
this is trivially true, for variable size instruction platforms
the breakpoint instruction is typically the smallest (often a
single byte).
Writing the instruction is done by COWing the page and changing
the instruction during the copy, this even though most platforms
allow atomic writes of the breakpoint instruction. This also
mirrors the behaviour of a ptrace() memory write to a PRIVATE
file map.
The core worker is derived from KSM's replace_page() logic.
In essence, similar to KSM:
a. allocate a new page and copy over contents of the page that
has the uprobed vaddr
b. modify the copy and insert the breakpoint at the required
address
c. switch the original page with the copy containing the
breakpoint
d. flush page tables.
replace_page() is being replicated here because of some minor
changes in the type of pages and also because Hugh Dickins had
plans to improve replace_page() for KSM specific work.
Instruction analysis on x86 is based on instruction decoder and
determines if an instruction can be probed and determines the
necessary fixups after singlestep. Instruction analysis is done
at probe insertion time so that we avoid having to repeat the
same analysis every time a probe is hit.
A lot of code here is due to the improvement/suggestions/inputs
from Peter Zijlstra.
Changelog:
(v10):
- Add code to clear REX.B prefix as suggested by Denys Vlasenko
and Masami Hiramatsu.
(v9):
- Use insn_offset_modrm as suggested by Masami Hiramatsu.
(v7):
Handle comments from Peter Zijlstra:
- Dont take reference to inode. (expect inode to uprobe_register to be sane).
- Use PTR_ERR to set the return value.
- No need to take reference to inode.
- use PTR_ERR to return error value.
- register and uprobe_unregister share code.
(v5):
- Modified del_consumer as per comments from Peter.
- Drop reference to inode before dropping reference to uprobe.
- Use i_size_read(inode) instead of inode->i_size.
- Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called.
- Includes errno.h as recommended by Stephen Rothwell to fix a build issue
on sparc defconfig
- Remove restrictions while unregistering.
- Earlier code leaked inode references under some conditions while
registering/unregistering.
- Continue the vma-rmap walk even if the intermediate vma doesnt
meet the requirements.
- Validate the vma found by find_vma before inserting/removing the
breakpoint
- Call del_consumer under mutex_lock.
- Use hash locks.
- Handle mremap.
- Introduce find_least_offset_node() instead of close match logic in
find_uprobe
- Uprobes no more depends on MM_OWNER; No reference to task_structs
while inserting/removing a probe.
- Uses read_mapping_page instead of grab_cache_page so that the pages
have valid content.
- pass NULL to get_user_pages for the task parameter.
- call SetPageUptodate on the new page allocated in write_opcode.
- fix leaking a reference to the new page under certain conditions.
- Include Instruction Decoder if Uprobes gets defined.
- Remove const attributes for instruction prefix arrays.
- Uses mm_context to know if the application is 32 bit.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Also-written-by: Jim Keniston <jkenisto@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com
[ Made various small edits to the commit log ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
|
|
|
|
|
|
|
|
struct uprobe_consumer *next;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_UPROBES
|
2013-11-10 02:49:39 +08:00
|
|
|
#include <asm/uprobes.h>
|
|
|
|
|
|
uprobes/core: Handle breakpoint and singlestep exceptions
Uprobes uses exception notifiers to get to know if a thread hit
a breakpoint or a singlestep exception.
When a thread hits a uprobe or is singlestepping post a uprobe
hit, the uprobe exception notifier sets its TIF_UPROBE bit,
which will then be checked on its return to userspace path
(do_notify_resume() ->uprobe_notify_resume()), where the
consumers handlers are run (in task context) based on the
defined filters.
Uprobe hits are thread specific and hence we need to maintain
information about if a task hit a uprobe, what uprobe was hit,
the slot where the original instruction was copied for xol so
that it can be singlestepped with appropriate fixups.
In some cases, special care is needed for instructions that are
executed out of line (xol). These are architecture specific
artefacts, such as handling RIP relative instructions on x86_64.
Since the instruction at which the uprobe was inserted is
executed out of line, architecture specific fixups are added so
that the thread continues normal execution in the presence of a
uprobe.
Postpone the signals until we execute the probed insn.
post_xol() path does a recalc_sigpending() before return to
user-mode, this ensures the signal can't be lost.
Uprobes relies on DIE_DEBUG notification to notify if a
singlestep is complete.
Adds x86 specific uprobe exception notifiers and appropriate
hooks needed to determine a uprobe hit and subsequent post
processing.
Add requisite x86 fixups for xol for uprobes. Specific cases
needing fixups include relative jumps (x86_64), calls, etc.
Where possible, we check and skip singlestepping the
breakpointed instructions. For now we skip single byte as well
as few multibyte nop instructions. However this can be extended
to other instructions too.
Credits to Oleg Nesterov for suggestions/patches related to
signal, breakpoint, singlestep handling code.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com
[ Performed various cleanliness edits ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
|
|
|
enum uprobe_task_state {
|
|
|
|
|
UTASK_RUNNING,
|
|
|
|
|
UTASK_SSTEP,
|
|
|
|
|
UTASK_SSTEP_ACK,
|
|
|
|
|
UTASK_SSTEP_TRAPPED,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* uprobe_task: Metadata of a task while it singlesteps.
|
|
|
|
|
*/
|
|
|
|
|
struct uprobe_task {
|
|
|
|
|
enum uprobe_task_state state;
|
|
|
|
|
|
2013-11-09 01:52:21 +08:00
|
|
|
union {
|
|
|
|
|
struct {
|
|
|
|
|
struct arch_uprobe_task autask;
|
|
|
|
|
unsigned long vaddr;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
struct {
|
|
|
|
|
struct callback_head dup_xol_work;
|
|
|
|
|
unsigned long dup_xol_addr;
|
|
|
|
|
};
|
|
|
|
|
};
|
uprobes/core: Handle breakpoint and singlestep exceptions
Uprobes uses exception notifiers to get to know if a thread hit
a breakpoint or a singlestep exception.
When a thread hits a uprobe or is singlestepping post a uprobe
hit, the uprobe exception notifier sets its TIF_UPROBE bit,
which will then be checked on its return to userspace path
(do_notify_resume() ->uprobe_notify_resume()), where the
consumers handlers are run (in task context) based on the
defined filters.
Uprobe hits are thread specific and hence we need to maintain
information about if a task hit a uprobe, what uprobe was hit,
the slot where the original instruction was copied for xol so
that it can be singlestepped with appropriate fixups.
In some cases, special care is needed for instructions that are
executed out of line (xol). These are architecture specific
artefacts, such as handling RIP relative instructions on x86_64.
Since the instruction at which the uprobe was inserted is
executed out of line, architecture specific fixups are added so
that the thread continues normal execution in the presence of a
uprobe.
Postpone the signals until we execute the probed insn.
post_xol() path does a recalc_sigpending() before return to
user-mode, this ensures the signal can't be lost.
Uprobes relies on DIE_DEBUG notification to notify if a
singlestep is complete.
Adds x86 specific uprobe exception notifiers and appropriate
hooks needed to determine a uprobe hit and subsequent post
processing.
Add requisite x86 fixups for xol for uprobes. Specific cases
needing fixups include relative jumps (x86_64), calls, etc.
Where possible, we check and skip singlestepping the
breakpointed instructions. For now we skip single byte as well
as few multibyte nop instructions. However this can be extended
to other instructions too.
Credits to Oleg Nesterov for suggestions/patches related to
signal, breakpoint, singlestep handling code.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com
[ Performed various cleanliness edits ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
|
|
|
|
2013-11-09 01:52:21 +08:00
|
|
|
struct uprobe *active_uprobe;
|
uprobes/core: Handle breakpoint and singlestep exceptions
Uprobes uses exception notifiers to get to know if a thread hit
a breakpoint or a singlestep exception.
When a thread hits a uprobe or is singlestepping post a uprobe
hit, the uprobe exception notifier sets its TIF_UPROBE bit,
which will then be checked on its return to userspace path
(do_notify_resume() ->uprobe_notify_resume()), where the
consumers handlers are run (in task context) based on the
defined filters.
Uprobe hits are thread specific and hence we need to maintain
information about if a task hit a uprobe, what uprobe was hit,
the slot where the original instruction was copied for xol so
that it can be singlestepped with appropriate fixups.
In some cases, special care is needed for instructions that are
executed out of line (xol). These are architecture specific
artefacts, such as handling RIP relative instructions on x86_64.
Since the instruction at which the uprobe was inserted is
executed out of line, architecture specific fixups are added so
that the thread continues normal execution in the presence of a
uprobe.
Postpone the signals until we execute the probed insn.
post_xol() path does a recalc_sigpending() before return to
user-mode, this ensures the signal can't be lost.
Uprobes relies on DIE_DEBUG notification to notify if a
singlestep is complete.
Adds x86 specific uprobe exception notifiers and appropriate
hooks needed to determine a uprobe hit and subsequent post
processing.
Add requisite x86 fixups for xol for uprobes. Specific cases
needing fixups include relative jumps (x86_64), calls, etc.
Where possible, we check and skip singlestepping the
breakpointed instructions. For now we skip single byte as well
as few multibyte nop instructions. However this can be extended
to other instructions too.
Credits to Oleg Nesterov for suggestions/patches related to
signal, breakpoint, singlestep handling code.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com
[ Performed various cleanliness edits ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
|
|
|
unsigned long xol_vaddr;
|
2013-11-09 01:52:21 +08:00
|
|
|
|
|
|
|
|
struct return_instance *return_instances;
|
|
|
|
|
unsigned int depth;
|
uprobes/core: Handle breakpoint and singlestep exceptions
Uprobes uses exception notifiers to get to know if a thread hit
a breakpoint or a singlestep exception.
When a thread hits a uprobe or is singlestepping post a uprobe
hit, the uprobe exception notifier sets its TIF_UPROBE bit,
which will then be checked on its return to userspace path
(do_notify_resume() ->uprobe_notify_resume()), where the
consumers handlers are run (in task context) based on the
defined filters.
Uprobe hits are thread specific and hence we need to maintain
information about if a task hit a uprobe, what uprobe was hit,
the slot where the original instruction was copied for xol so
that it can be singlestepped with appropriate fixups.
In some cases, special care is needed for instructions that are
executed out of line (xol). These are architecture specific
artefacts, such as handling RIP relative instructions on x86_64.
Since the instruction at which the uprobe was inserted is
executed out of line, architecture specific fixups are added so
that the thread continues normal execution in the presence of a
uprobe.
Postpone the signals until we execute the probed insn.
post_xol() path does a recalc_sigpending() before return to
user-mode, this ensures the signal can't be lost.
Uprobes relies on DIE_DEBUG notification to notify if a
singlestep is complete.
Adds x86 specific uprobe exception notifiers and appropriate
hooks needed to determine a uprobe hit and subsequent post
processing.
Add requisite x86 fixups for xol for uprobes. Specific cases
needing fixups include relative jumps (x86_64), calls, etc.
Where possible, we check and skip singlestepping the
breakpointed instructions. For now we skip single byte as well
as few multibyte nop instructions. However this can be extended
to other instructions too.
Credits to Oleg Nesterov for suggestions/patches related to
signal, breakpoint, singlestep handling code.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com
[ Performed various cleanliness edits ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
|
|
|
};
|
|
|
|
|
|
2015-07-21 21:40:16 +08:00
|
|
|
struct return_instance {
|
|
|
|
|
struct uprobe *uprobe;
|
|
|
|
|
unsigned long func;
|
2015-07-21 21:40:18 +08:00
|
|
|
unsigned long stack; /* stack pointer */
|
2015-07-21 21:40:16 +08:00
|
|
|
unsigned long orig_ret_vaddr; /* original return address */
|
|
|
|
|
bool chained; /* true, if instance is nested */
|
|
|
|
|
|
|
|
|
|
struct return_instance *next; /* keep as stack */
|
|
|
|
|
};
|
|
|
|
|
|
2015-07-21 21:40:26 +08:00
|
|
|
enum rp_check {
|
|
|
|
|
RP_CHECK_CALL,
|
2015-07-21 21:40:28 +08:00
|
|
|
RP_CHECK_CHAIN_CALL,
|
2015-07-21 21:40:26 +08:00
|
|
|
RP_CHECK_RET,
|
|
|
|
|
};
|
|
|
|
|
|
2013-11-10 02:49:39 +08:00
|
|
|
struct xol_area;
|
2012-03-31 02:26:31 +08:00
|
|
|
|
|
|
|
|
struct uprobes_state {
|
|
|
|
|
struct xol_area *xol_area;
|
|
|
|
|
};
|
2012-08-06 19:15:09 +08:00
|
|
|
|
2014-10-14 09:01:03 +08:00
|
|
|
extern int set_swbp(struct arch_uprobe *aup, struct mm_struct *mm, unsigned long vaddr);
|
|
|
|
|
extern int set_orig_insn(struct arch_uprobe *aup, struct mm_struct *mm, unsigned long vaddr);
|
|
|
|
|
extern bool is_swbp_insn(uprobe_opcode_t *insn);
|
|
|
|
|
extern bool is_trap_insn(uprobe_opcode_t *insn);
|
|
|
|
|
extern unsigned long uprobe_get_swbp_addr(struct pt_regs *regs);
|
uprobes/x86: Fix the wrong ->si_addr when xol triggers a trap
If the probed insn triggers a trap, ->si_addr = regs->ip is technically
correct, but this is not what the signal handler wants; we need to pass
the address of the probed insn, not the address of xol slot.
Add the new arch-agnostic helper, uprobe_get_trap_addr(), and change
fill_trap_info() and math_error() to use it. !CONFIG_UPROBES case in
uprobes.h uses a macro to avoid include hell and ensure that it can be
compiled even if an architecture doesn't define instruction_pointer().
Test-case:
#include <signal.h>
#include <stdio.h>
#include <unistd.h>
extern void probe_div(void);
void sigh(int sig, siginfo_t *info, void *c)
{
int passed = (info->si_addr == probe_div);
printf(passed ? "PASS\n" : "FAIL\n");
_exit(!passed);
}
int main(void)
{
struct sigaction sa = {
.sa_sigaction = sigh,
.sa_flags = SA_SIGINFO,
};
sigaction(SIGFPE, &sa, NULL);
asm (
"xor %ecx,%ecx\n"
".globl probe_div; probe_div:\n"
"idiv %ecx\n"
);
return 0;
}
it fails if probe_div() is probed.
Note: show_unhandled_signals users should probably use this helper too,
but we need to cleanup them first.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
2014-05-13 00:24:45 +08:00
|
|
|
extern unsigned long uprobe_get_trap_addr(struct pt_regs *regs);
|
2018-08-09 12:18:52 +08:00
|
|
|
extern int uprobe_write_opcode(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long vaddr, uprobe_opcode_t);
|
2012-03-12 17:25:30 +08:00
|
|
|
extern int uprobe_register(struct inode *inode, loff_t offset, struct uprobe_consumer *uc);
|
uprobes: Introduce uprobe_apply()
Currently it is not possible to change the filtering constraints after
uprobe_register(), so a consumer can not, say, start to trace a task/mm
which was previously filtered out, or remove the no longer needed bp's.
Introduce uprobe_apply() which simply does register_for_each_vma() again
to consult uprobe_consumer->filter() and install/remove the breakpoints.
The only complication is that register_for_each_vma() can no longer
assume that uprobe->consumers should be consulter if is_register == T,
so we change it to accept "struct uprobe_consumer *new" instead.
Unlike uprobe_register(), uprobe_apply(true) doesn't do "unregister" if
register_for_each_vma() fails, it is up to caller to handle the error.
Note: we probably need to cleanup the current interface, it is strange
that uprobe_apply/unregister need inode/offset. We should either change
uprobe_register() to return "struct uprobe *", or add a private ->uprobe
member in uprobe_consumer. And in the long term uprobe_apply() should
take a single argument, uprobe or consumer, even "bool add" should go
away.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-02-04 02:21:12 +08:00
|
|
|
extern int uprobe_apply(struct inode *inode, loff_t offset, struct uprobe_consumer *uc, bool);
|
2012-03-12 17:25:30 +08:00
|
|
|
extern void uprobe_unregister(struct inode *inode, loff_t offset, struct uprobe_consumer *uc);
|
2012-02-17 16:27:41 +08:00
|
|
|
extern int uprobe_mmap(struct vm_area_struct *vma);
|
2012-04-11 18:35:27 +08:00
|
|
|
extern void uprobe_munmap(struct vm_area_struct *vma, unsigned long start, unsigned long end);
|
2012-11-15 02:03:42 +08:00
|
|
|
extern void uprobe_start_dup_mmap(void);
|
|
|
|
|
extern void uprobe_end_dup_mmap(void);
|
2012-08-08 23:11:42 +08:00
|
|
|
extern void uprobe_dup_mmap(struct mm_struct *oldmm, struct mm_struct *newmm);
|
uprobes/core: Handle breakpoint and singlestep exceptions
Uprobes uses exception notifiers to get to know if a thread hit
a breakpoint or a singlestep exception.
When a thread hits a uprobe or is singlestepping post a uprobe
hit, the uprobe exception notifier sets its TIF_UPROBE bit,
which will then be checked on its return to userspace path
(do_notify_resume() ->uprobe_notify_resume()), where the
consumers handlers are run (in task context) based on the
defined filters.
Uprobe hits are thread specific and hence we need to maintain
information about if a task hit a uprobe, what uprobe was hit,
the slot where the original instruction was copied for xol so
that it can be singlestepped with appropriate fixups.
In some cases, special care is needed for instructions that are
executed out of line (xol). These are architecture specific
artefacts, such as handling RIP relative instructions on x86_64.
Since the instruction at which the uprobe was inserted is
executed out of line, architecture specific fixups are added so
that the thread continues normal execution in the presence of a
uprobe.
Postpone the signals until we execute the probed insn.
post_xol() path does a recalc_sigpending() before return to
user-mode, this ensures the signal can't be lost.
Uprobes relies on DIE_DEBUG notification to notify if a
singlestep is complete.
Adds x86 specific uprobe exception notifiers and appropriate
hooks needed to determine a uprobe hit and subsequent post
processing.
Add requisite x86 fixups for xol for uprobes. Specific cases
needing fixups include relative jumps (x86_64), calls, etc.
Where possible, we check and skip singlestepping the
breakpointed instructions. For now we skip single byte as well
as few multibyte nop instructions. However this can be extended
to other instructions too.
Credits to Oleg Nesterov for suggestions/patches related to
signal, breakpoint, singlestep handling code.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com
[ Performed various cleanliness edits ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
|
|
|
extern void uprobe_free_utask(struct task_struct *t);
|
2013-10-17 01:39:37 +08:00
|
|
|
extern void uprobe_copy_process(struct task_struct *t, unsigned long flags);
|
uprobes/core: Handle breakpoint and singlestep exceptions
Uprobes uses exception notifiers to get to know if a thread hit
a breakpoint or a singlestep exception.
When a thread hits a uprobe or is singlestepping post a uprobe
hit, the uprobe exception notifier sets its TIF_UPROBE bit,
which will then be checked on its return to userspace path
(do_notify_resume() ->uprobe_notify_resume()), where the
consumers handlers are run (in task context) based on the
defined filters.
Uprobe hits are thread specific and hence we need to maintain
information about if a task hit a uprobe, what uprobe was hit,
the slot where the original instruction was copied for xol so
that it can be singlestepped with appropriate fixups.
In some cases, special care is needed for instructions that are
executed out of line (xol). These are architecture specific
artefacts, such as handling RIP relative instructions on x86_64.
Since the instruction at which the uprobe was inserted is
executed out of line, architecture specific fixups are added so
that the thread continues normal execution in the presence of a
uprobe.
Postpone the signals until we execute the probed insn.
post_xol() path does a recalc_sigpending() before return to
user-mode, this ensures the signal can't be lost.
Uprobes relies on DIE_DEBUG notification to notify if a
singlestep is complete.
Adds x86 specific uprobe exception notifiers and appropriate
hooks needed to determine a uprobe hit and subsequent post
processing.
Add requisite x86 fixups for xol for uprobes. Specific cases
needing fixups include relative jumps (x86_64), calls, etc.
Where possible, we check and skip singlestepping the
breakpointed instructions. For now we skip single byte as well
as few multibyte nop instructions. However this can be extended
to other instructions too.
Credits to Oleg Nesterov for suggestions/patches related to
signal, breakpoint, singlestep handling code.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com
[ Performed various cleanliness edits ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
|
|
|
extern int uprobe_post_sstep_notifier(struct pt_regs *regs);
|
|
|
|
|
extern int uprobe_pre_sstep_notifier(struct pt_regs *regs);
|
|
|
|
|
extern void uprobe_notify_resume(struct pt_regs *regs);
|
|
|
|
|
extern bool uprobe_deny_signal(void);
|
2013-10-09 20:08:09 +08:00
|
|
|
extern bool arch_uprobe_skip_sstep(struct arch_uprobe *aup, struct pt_regs *regs);
|
2012-03-31 02:26:31 +08:00
|
|
|
extern void uprobe_clear_state(struct mm_struct *mm);
|
2013-10-16 05:04:16 +08:00
|
|
|
extern int arch_uprobe_analyze_insn(struct arch_uprobe *aup, struct mm_struct *mm, unsigned long addr);
|
|
|
|
|
extern int arch_uprobe_pre_xol(struct arch_uprobe *aup, struct pt_regs *regs);
|
|
|
|
|
extern int arch_uprobe_post_xol(struct arch_uprobe *aup, struct pt_regs *regs);
|
|
|
|
|
extern bool arch_uprobe_xol_was_trapped(struct task_struct *tsk);
|
|
|
|
|
extern int arch_uprobe_exception_notify(struct notifier_block *self, unsigned long val, void *data);
|
|
|
|
|
extern void arch_uprobe_abort_xol(struct arch_uprobe *aup, struct pt_regs *regs);
|
|
|
|
|
extern unsigned long arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr, struct pt_regs *regs);
|
2015-07-21 21:40:26 +08:00
|
|
|
extern bool arch_uretprobe_is_alive(struct return_instance *ret, enum rp_check ctx, struct pt_regs *regs);
|
2014-10-14 09:01:03 +08:00
|
|
|
extern bool arch_uprobe_ignore(struct arch_uprobe *aup, struct pt_regs *regs);
|
|
|
|
|
extern void arch_uprobe_copy_ixol(struct page *page, unsigned long vaddr,
|
2014-04-29 11:20:52 +08:00
|
|
|
void *src, unsigned long len);
|
uprobes/core: Handle breakpoint and singlestep exceptions
Uprobes uses exception notifiers to get to know if a thread hit
a breakpoint or a singlestep exception.
When a thread hits a uprobe or is singlestepping post a uprobe
hit, the uprobe exception notifier sets its TIF_UPROBE bit,
which will then be checked on its return to userspace path
(do_notify_resume() ->uprobe_notify_resume()), where the
consumers handlers are run (in task context) based on the
defined filters.
Uprobe hits are thread specific and hence we need to maintain
information about if a task hit a uprobe, what uprobe was hit,
the slot where the original instruction was copied for xol so
that it can be singlestepped with appropriate fixups.
In some cases, special care is needed for instructions that are
executed out of line (xol). These are architecture specific
artefacts, such as handling RIP relative instructions on x86_64.
Since the instruction at which the uprobe was inserted is
executed out of line, architecture specific fixups are added so
that the thread continues normal execution in the presence of a
uprobe.
Postpone the signals until we execute the probed insn.
post_xol() path does a recalc_sigpending() before return to
user-mode, this ensures the signal can't be lost.
Uprobes relies on DIE_DEBUG notification to notify if a
singlestep is complete.
Adds x86 specific uprobe exception notifiers and appropriate
hooks needed to determine a uprobe hit and subsequent post
processing.
Add requisite x86 fixups for xol for uprobes. Specific cases
needing fixups include relative jumps (x86_64), calls, etc.
Where possible, we check and skip singlestepping the
breakpointed instructions. For now we skip single byte as well
as few multibyte nop instructions. However this can be extended
to other instructions too.
Credits to Oleg Nesterov for suggestions/patches related to
signal, breakpoint, singlestep handling code.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com
[ Performed various cleanliness edits ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
|
|
|
#else /* !CONFIG_UPROBES */
|
2012-03-31 02:26:31 +08:00
|
|
|
struct uprobes_state {
|
|
|
|
|
};
|
uprobes/x86: Fix the wrong ->si_addr when xol triggers a trap
If the probed insn triggers a trap, ->si_addr = regs->ip is technically
correct, but this is not what the signal handler wants; we need to pass
the address of the probed insn, not the address of xol slot.
Add the new arch-agnostic helper, uprobe_get_trap_addr(), and change
fill_trap_info() and math_error() to use it. !CONFIG_UPROBES case in
uprobes.h uses a macro to avoid include hell and ensure that it can be
compiled even if an architecture doesn't define instruction_pointer().
Test-case:
#include <signal.h>
#include <stdio.h>
#include <unistd.h>
extern void probe_div(void);
void sigh(int sig, siginfo_t *info, void *c)
{
int passed = (info->si_addr == probe_div);
printf(passed ? "PASS\n" : "FAIL\n");
_exit(!passed);
}
int main(void)
{
struct sigaction sa = {
.sa_sigaction = sigh,
.sa_flags = SA_SIGINFO,
};
sigaction(SIGFPE, &sa, NULL);
asm (
"xor %ecx,%ecx\n"
".globl probe_div; probe_div:\n"
"idiv %ecx\n"
);
return 0;
}
it fails if probe_div() is probed.
Note: show_unhandled_signals users should probably use this helper too,
but we need to cleanup them first.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
2014-05-13 00:24:45 +08:00
|
|
|
|
|
|
|
|
#define uprobe_get_trap_addr(regs) instruction_pointer(regs)
|
|
|
|
|
|
2012-02-17 16:27:41 +08:00
|
|
|
static inline int
|
2012-03-12 17:25:30 +08:00
|
|
|
uprobe_register(struct inode *inode, loff_t offset, struct uprobe_consumer *uc)
|
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints
Add uprobes support to the core kernel, with x86 support.
This commit adds the kernel facilities, the actual uprobes
user-space ABI and perf probe support comes in later commits.
General design:
Uprobes are maintained in an rb-tree indexed by inode and offset
(the offset here is from the start of the mapping). For a unique
(inode, offset) tuple, there can be at most one uprobe in the
rb-tree.
Since the (inode, offset) tuple identifies a unique uprobe, more
than one user may be interested in the same uprobe. This provides
the ability to connect multiple 'consumers' to the same uprobe.
Each consumer defines a handler and a filter (optional). The
'handler' is run every time the uprobe is hit, if it matches the
'filter' criteria.
The first consumer of a uprobe causes the breakpoint to be
inserted at the specified address and subsequent consumers are
appended to this list. On subsequent probes, the consumer gets
appended to the existing list of consumers. The breakpoint is
removed when the last consumer unregisters. For all other
unregisterations, the consumer is removed from the list of
consumers.
Given a inode, we get a list of the mms that have mapped the
inode. Do the actual registration if mm maps the page where a
probe needs to be inserted/removed.
We use a temporary list to walk through the vmas that map the
inode.
- The number of maps that map the inode, is not known before we
walk the rmap and keeps changing.
- extending vm_area_struct wasn't recommended, it's a
size-critical data structure.
- There can be more than one maps of the inode in the same mm.
We add callbacks to the mmap methods to keep an eye on text vmas
that are of interest to uprobes. When a vma of interest is mapped,
we insert the breakpoint at the right address.
Uprobe works by replacing the instruction at the address defined
by (inode, offset) with the arch specific breakpoint
instruction. We save a copy of the original instruction at the
uprobed address.
This is needed for:
a. executing the instruction out-of-line (xol).
b. instruction analysis for any subsequent fixups.
c. restoring the instruction back when the uprobe is unregistered.
We insert or delete a breakpoint instruction, and this
breakpoint instruction is assumed to be the smallest instruction
available on the platform. For fixed size instruction platforms
this is trivially true, for variable size instruction platforms
the breakpoint instruction is typically the smallest (often a
single byte).
Writing the instruction is done by COWing the page and changing
the instruction during the copy, this even though most platforms
allow atomic writes of the breakpoint instruction. This also
mirrors the behaviour of a ptrace() memory write to a PRIVATE
file map.
The core worker is derived from KSM's replace_page() logic.
In essence, similar to KSM:
a. allocate a new page and copy over contents of the page that
has the uprobed vaddr
b. modify the copy and insert the breakpoint at the required
address
c. switch the original page with the copy containing the
breakpoint
d. flush page tables.
replace_page() is being replicated here because of some minor
changes in the type of pages and also because Hugh Dickins had
plans to improve replace_page() for KSM specific work.
Instruction analysis on x86 is based on instruction decoder and
determines if an instruction can be probed and determines the
necessary fixups after singlestep. Instruction analysis is done
at probe insertion time so that we avoid having to repeat the
same analysis every time a probe is hit.
A lot of code here is due to the improvement/suggestions/inputs
from Peter Zijlstra.
Changelog:
(v10):
- Add code to clear REX.B prefix as suggested by Denys Vlasenko
and Masami Hiramatsu.
(v9):
- Use insn_offset_modrm as suggested by Masami Hiramatsu.
(v7):
Handle comments from Peter Zijlstra:
- Dont take reference to inode. (expect inode to uprobe_register to be sane).
- Use PTR_ERR to set the return value.
- No need to take reference to inode.
- use PTR_ERR to return error value.
- register and uprobe_unregister share code.
(v5):
- Modified del_consumer as per comments from Peter.
- Drop reference to inode before dropping reference to uprobe.
- Use i_size_read(inode) instead of inode->i_size.
- Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called.
- Includes errno.h as recommended by Stephen Rothwell to fix a build issue
on sparc defconfig
- Remove restrictions while unregistering.
- Earlier code leaked inode references under some conditions while
registering/unregistering.
- Continue the vma-rmap walk even if the intermediate vma doesnt
meet the requirements.
- Validate the vma found by find_vma before inserting/removing the
breakpoint
- Call del_consumer under mutex_lock.
- Use hash locks.
- Handle mremap.
- Introduce find_least_offset_node() instead of close match logic in
find_uprobe
- Uprobes no more depends on MM_OWNER; No reference to task_structs
while inserting/removing a probe.
- Uses read_mapping_page instead of grab_cache_page so that the pages
have valid content.
- pass NULL to get_user_pages for the task parameter.
- call SetPageUptodate on the new page allocated in write_opcode.
- fix leaking a reference to the new page under certain conditions.
- Include Instruction Decoder if Uprobes gets defined.
- Remove const attributes for instruction prefix arrays.
- Uses mm_context to know if the application is 32 bit.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Also-written-by: Jim Keniston <jkenisto@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com
[ Made various small edits to the commit log ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
|
|
|
{
|
|
|
|
|
return -ENOSYS;
|
|
|
|
|
}
|
uprobes: Introduce uprobe_apply()
Currently it is not possible to change the filtering constraints after
uprobe_register(), so a consumer can not, say, start to trace a task/mm
which was previously filtered out, or remove the no longer needed bp's.
Introduce uprobe_apply() which simply does register_for_each_vma() again
to consult uprobe_consumer->filter() and install/remove the breakpoints.
The only complication is that register_for_each_vma() can no longer
assume that uprobe->consumers should be consulter if is_register == T,
so we change it to accept "struct uprobe_consumer *new" instead.
Unlike uprobe_register(), uprobe_apply(true) doesn't do "unregister" if
register_for_each_vma() fails, it is up to caller to handle the error.
Note: we probably need to cleanup the current interface, it is strange
that uprobe_apply/unregister need inode/offset. We should either change
uprobe_register() to return "struct uprobe *", or add a private ->uprobe
member in uprobe_consumer. And in the long term uprobe_apply() should
take a single argument, uprobe or consumer, even "bool add" should go
away.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-02-04 02:21:12 +08:00
|
|
|
static inline int
|
|
|
|
|
uprobe_apply(struct inode *inode, loff_t offset, struct uprobe_consumer *uc, bool add)
|
|
|
|
|
{
|
|
|
|
|
return -ENOSYS;
|
|
|
|
|
}
|
2012-02-17 16:27:41 +08:00
|
|
|
static inline void
|
2012-03-12 17:25:30 +08:00
|
|
|
uprobe_unregister(struct inode *inode, loff_t offset, struct uprobe_consumer *uc)
|
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints
Add uprobes support to the core kernel, with x86 support.
This commit adds the kernel facilities, the actual uprobes
user-space ABI and perf probe support comes in later commits.
General design:
Uprobes are maintained in an rb-tree indexed by inode and offset
(the offset here is from the start of the mapping). For a unique
(inode, offset) tuple, there can be at most one uprobe in the
rb-tree.
Since the (inode, offset) tuple identifies a unique uprobe, more
than one user may be interested in the same uprobe. This provides
the ability to connect multiple 'consumers' to the same uprobe.
Each consumer defines a handler and a filter (optional). The
'handler' is run every time the uprobe is hit, if it matches the
'filter' criteria.
The first consumer of a uprobe causes the breakpoint to be
inserted at the specified address and subsequent consumers are
appended to this list. On subsequent probes, the consumer gets
appended to the existing list of consumers. The breakpoint is
removed when the last consumer unregisters. For all other
unregisterations, the consumer is removed from the list of
consumers.
Given a inode, we get a list of the mms that have mapped the
inode. Do the actual registration if mm maps the page where a
probe needs to be inserted/removed.
We use a temporary list to walk through the vmas that map the
inode.
- The number of maps that map the inode, is not known before we
walk the rmap and keeps changing.
- extending vm_area_struct wasn't recommended, it's a
size-critical data structure.
- There can be more than one maps of the inode in the same mm.
We add callbacks to the mmap methods to keep an eye on text vmas
that are of interest to uprobes. When a vma of interest is mapped,
we insert the breakpoint at the right address.
Uprobe works by replacing the instruction at the address defined
by (inode, offset) with the arch specific breakpoint
instruction. We save a copy of the original instruction at the
uprobed address.
This is needed for:
a. executing the instruction out-of-line (xol).
b. instruction analysis for any subsequent fixups.
c. restoring the instruction back when the uprobe is unregistered.
We insert or delete a breakpoint instruction, and this
breakpoint instruction is assumed to be the smallest instruction
available on the platform. For fixed size instruction platforms
this is trivially true, for variable size instruction platforms
the breakpoint instruction is typically the smallest (often a
single byte).
Writing the instruction is done by COWing the page and changing
the instruction during the copy, this even though most platforms
allow atomic writes of the breakpoint instruction. This also
mirrors the behaviour of a ptrace() memory write to a PRIVATE
file map.
The core worker is derived from KSM's replace_page() logic.
In essence, similar to KSM:
a. allocate a new page and copy over contents of the page that
has the uprobed vaddr
b. modify the copy and insert the breakpoint at the required
address
c. switch the original page with the copy containing the
breakpoint
d. flush page tables.
replace_page() is being replicated here because of some minor
changes in the type of pages and also because Hugh Dickins had
plans to improve replace_page() for KSM specific work.
Instruction analysis on x86 is based on instruction decoder and
determines if an instruction can be probed and determines the
necessary fixups after singlestep. Instruction analysis is done
at probe insertion time so that we avoid having to repeat the
same analysis every time a probe is hit.
A lot of code here is due to the improvement/suggestions/inputs
from Peter Zijlstra.
Changelog:
(v10):
- Add code to clear REX.B prefix as suggested by Denys Vlasenko
and Masami Hiramatsu.
(v9):
- Use insn_offset_modrm as suggested by Masami Hiramatsu.
(v7):
Handle comments from Peter Zijlstra:
- Dont take reference to inode. (expect inode to uprobe_register to be sane).
- Use PTR_ERR to set the return value.
- No need to take reference to inode.
- use PTR_ERR to return error value.
- register and uprobe_unregister share code.
(v5):
- Modified del_consumer as per comments from Peter.
- Drop reference to inode before dropping reference to uprobe.
- Use i_size_read(inode) instead of inode->i_size.
- Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called.
- Includes errno.h as recommended by Stephen Rothwell to fix a build issue
on sparc defconfig
- Remove restrictions while unregistering.
- Earlier code leaked inode references under some conditions while
registering/unregistering.
- Continue the vma-rmap walk even if the intermediate vma doesnt
meet the requirements.
- Validate the vma found by find_vma before inserting/removing the
breakpoint
- Call del_consumer under mutex_lock.
- Use hash locks.
- Handle mremap.
- Introduce find_least_offset_node() instead of close match logic in
find_uprobe
- Uprobes no more depends on MM_OWNER; No reference to task_structs
while inserting/removing a probe.
- Uses read_mapping_page instead of grab_cache_page so that the pages
have valid content.
- pass NULL to get_user_pages for the task parameter.
- call SetPageUptodate on the new page allocated in write_opcode.
- fix leaking a reference to the new page under certain conditions.
- Include Instruction Decoder if Uprobes gets defined.
- Remove const attributes for instruction prefix arrays.
- Uses mm_context to know if the application is 32 bit.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Also-written-by: Jim Keniston <jkenisto@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com
[ Made various small edits to the commit log ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
|
|
|
{
|
|
|
|
|
}
|
2012-02-17 16:27:41 +08:00
|
|
|
static inline int uprobe_mmap(struct vm_area_struct *vma)
|
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints
Add uprobes support to the core kernel, with x86 support.
This commit adds the kernel facilities, the actual uprobes
user-space ABI and perf probe support comes in later commits.
General design:
Uprobes are maintained in an rb-tree indexed by inode and offset
(the offset here is from the start of the mapping). For a unique
(inode, offset) tuple, there can be at most one uprobe in the
rb-tree.
Since the (inode, offset) tuple identifies a unique uprobe, more
than one user may be interested in the same uprobe. This provides
the ability to connect multiple 'consumers' to the same uprobe.
Each consumer defines a handler and a filter (optional). The
'handler' is run every time the uprobe is hit, if it matches the
'filter' criteria.
The first consumer of a uprobe causes the breakpoint to be
inserted at the specified address and subsequent consumers are
appended to this list. On subsequent probes, the consumer gets
appended to the existing list of consumers. The breakpoint is
removed when the last consumer unregisters. For all other
unregisterations, the consumer is removed from the list of
consumers.
Given a inode, we get a list of the mms that have mapped the
inode. Do the actual registration if mm maps the page where a
probe needs to be inserted/removed.
We use a temporary list to walk through the vmas that map the
inode.
- The number of maps that map the inode, is not known before we
walk the rmap and keeps changing.
- extending vm_area_struct wasn't recommended, it's a
size-critical data structure.
- There can be more than one maps of the inode in the same mm.
We add callbacks to the mmap methods to keep an eye on text vmas
that are of interest to uprobes. When a vma of interest is mapped,
we insert the breakpoint at the right address.
Uprobe works by replacing the instruction at the address defined
by (inode, offset) with the arch specific breakpoint
instruction. We save a copy of the original instruction at the
uprobed address.
This is needed for:
a. executing the instruction out-of-line (xol).
b. instruction analysis for any subsequent fixups.
c. restoring the instruction back when the uprobe is unregistered.
We insert or delete a breakpoint instruction, and this
breakpoint instruction is assumed to be the smallest instruction
available on the platform. For fixed size instruction platforms
this is trivially true, for variable size instruction platforms
the breakpoint instruction is typically the smallest (often a
single byte).
Writing the instruction is done by COWing the page and changing
the instruction during the copy, this even though most platforms
allow atomic writes of the breakpoint instruction. This also
mirrors the behaviour of a ptrace() memory write to a PRIVATE
file map.
The core worker is derived from KSM's replace_page() logic.
In essence, similar to KSM:
a. allocate a new page and copy over contents of the page that
has the uprobed vaddr
b. modify the copy and insert the breakpoint at the required
address
c. switch the original page with the copy containing the
breakpoint
d. flush page tables.
replace_page() is being replicated here because of some minor
changes in the type of pages and also because Hugh Dickins had
plans to improve replace_page() for KSM specific work.
Instruction analysis on x86 is based on instruction decoder and
determines if an instruction can be probed and determines the
necessary fixups after singlestep. Instruction analysis is done
at probe insertion time so that we avoid having to repeat the
same analysis every time a probe is hit.
A lot of code here is due to the improvement/suggestions/inputs
from Peter Zijlstra.
Changelog:
(v10):
- Add code to clear REX.B prefix as suggested by Denys Vlasenko
and Masami Hiramatsu.
(v9):
- Use insn_offset_modrm as suggested by Masami Hiramatsu.
(v7):
Handle comments from Peter Zijlstra:
- Dont take reference to inode. (expect inode to uprobe_register to be sane).
- Use PTR_ERR to set the return value.
- No need to take reference to inode.
- use PTR_ERR to return error value.
- register and uprobe_unregister share code.
(v5):
- Modified del_consumer as per comments from Peter.
- Drop reference to inode before dropping reference to uprobe.
- Use i_size_read(inode) instead of inode->i_size.
- Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called.
- Includes errno.h as recommended by Stephen Rothwell to fix a build issue
on sparc defconfig
- Remove restrictions while unregistering.
- Earlier code leaked inode references under some conditions while
registering/unregistering.
- Continue the vma-rmap walk even if the intermediate vma doesnt
meet the requirements.
- Validate the vma found by find_vma before inserting/removing the
breakpoint
- Call del_consumer under mutex_lock.
- Use hash locks.
- Handle mremap.
- Introduce find_least_offset_node() instead of close match logic in
find_uprobe
- Uprobes no more depends on MM_OWNER; No reference to task_structs
while inserting/removing a probe.
- Uses read_mapping_page instead of grab_cache_page so that the pages
have valid content.
- pass NULL to get_user_pages for the task parameter.
- call SetPageUptodate on the new page allocated in write_opcode.
- fix leaking a reference to the new page under certain conditions.
- Include Instruction Decoder if Uprobes gets defined.
- Remove const attributes for instruction prefix arrays.
- Uses mm_context to know if the application is 32 bit.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Also-written-by: Jim Keniston <jkenisto@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com
[ Made various small edits to the commit log ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
|
|
|
{
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
2012-04-11 18:35:27 +08:00
|
|
|
static inline void
|
|
|
|
|
uprobe_munmap(struct vm_area_struct *vma, unsigned long start, unsigned long end)
|
2012-03-31 02:26:46 +08:00
|
|
|
{
|
|
|
|
|
}
|
2012-11-15 02:03:42 +08:00
|
|
|
static inline void uprobe_start_dup_mmap(void)
|
|
|
|
|
{
|
|
|
|
|
}
|
|
|
|
|
static inline void uprobe_end_dup_mmap(void)
|
|
|
|
|
{
|
|
|
|
|
}
|
2012-08-08 23:11:42 +08:00
|
|
|
static inline void
|
|
|
|
|
uprobe_dup_mmap(struct mm_struct *oldmm, struct mm_struct *newmm)
|
|
|
|
|
{
|
|
|
|
|
}
|
uprobes/core: Handle breakpoint and singlestep exceptions
Uprobes uses exception notifiers to get to know if a thread hit
a breakpoint or a singlestep exception.
When a thread hits a uprobe or is singlestepping post a uprobe
hit, the uprobe exception notifier sets its TIF_UPROBE bit,
which will then be checked on its return to userspace path
(do_notify_resume() ->uprobe_notify_resume()), where the
consumers handlers are run (in task context) based on the
defined filters.
Uprobe hits are thread specific and hence we need to maintain
information about if a task hit a uprobe, what uprobe was hit,
the slot where the original instruction was copied for xol so
that it can be singlestepped with appropriate fixups.
In some cases, special care is needed for instructions that are
executed out of line (xol). These are architecture specific
artefacts, such as handling RIP relative instructions on x86_64.
Since the instruction at which the uprobe was inserted is
executed out of line, architecture specific fixups are added so
that the thread continues normal execution in the presence of a
uprobe.
Postpone the signals until we execute the probed insn.
post_xol() path does a recalc_sigpending() before return to
user-mode, this ensures the signal can't be lost.
Uprobes relies on DIE_DEBUG notification to notify if a
singlestep is complete.
Adds x86 specific uprobe exception notifiers and appropriate
hooks needed to determine a uprobe hit and subsequent post
processing.
Add requisite x86 fixups for xol for uprobes. Specific cases
needing fixups include relative jumps (x86_64), calls, etc.
Where possible, we check and skip singlestepping the
breakpointed instructions. For now we skip single byte as well
as few multibyte nop instructions. However this can be extended
to other instructions too.
Credits to Oleg Nesterov for suggestions/patches related to
signal, breakpoint, singlestep handling code.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com
[ Performed various cleanliness edits ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
|
|
|
static inline void uprobe_notify_resume(struct pt_regs *regs)
|
|
|
|
|
{
|
|
|
|
|
}
|
|
|
|
|
static inline bool uprobe_deny_signal(void)
|
|
|
|
|
{
|
|
|
|
|
return false;
|
|
|
|
|
}
|
|
|
|
|
static inline void uprobe_free_utask(struct task_struct *t)
|
|
|
|
|
{
|
|
|
|
|
}
|
2013-10-17 01:39:37 +08:00
|
|
|
static inline void uprobe_copy_process(struct task_struct *t, unsigned long flags)
|
uprobes/core: Handle breakpoint and singlestep exceptions
Uprobes uses exception notifiers to get to know if a thread hit
a breakpoint or a singlestep exception.
When a thread hits a uprobe or is singlestepping post a uprobe
hit, the uprobe exception notifier sets its TIF_UPROBE bit,
which will then be checked on its return to userspace path
(do_notify_resume() ->uprobe_notify_resume()), where the
consumers handlers are run (in task context) based on the
defined filters.
Uprobe hits are thread specific and hence we need to maintain
information about if a task hit a uprobe, what uprobe was hit,
the slot where the original instruction was copied for xol so
that it can be singlestepped with appropriate fixups.
In some cases, special care is needed for instructions that are
executed out of line (xol). These are architecture specific
artefacts, such as handling RIP relative instructions on x86_64.
Since the instruction at which the uprobe was inserted is
executed out of line, architecture specific fixups are added so
that the thread continues normal execution in the presence of a
uprobe.
Postpone the signals until we execute the probed insn.
post_xol() path does a recalc_sigpending() before return to
user-mode, this ensures the signal can't be lost.
Uprobes relies on DIE_DEBUG notification to notify if a
singlestep is complete.
Adds x86 specific uprobe exception notifiers and appropriate
hooks needed to determine a uprobe hit and subsequent post
processing.
Add requisite x86 fixups for xol for uprobes. Specific cases
needing fixups include relative jumps (x86_64), calls, etc.
Where possible, we check and skip singlestepping the
breakpointed instructions. For now we skip single byte as well
as few multibyte nop instructions. However this can be extended
to other instructions too.
Credits to Oleg Nesterov for suggestions/patches related to
signal, breakpoint, singlestep handling code.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com
[ Performed various cleanliness edits ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
|
|
|
{
|
|
|
|
|
}
|
2012-03-31 02:26:31 +08:00
|
|
|
static inline void uprobe_clear_state(struct mm_struct *mm)
|
|
|
|
|
{
|
|
|
|
|
}
|
uprobes/core: Handle breakpoint and singlestep exceptions
Uprobes uses exception notifiers to get to know if a thread hit
a breakpoint or a singlestep exception.
When a thread hits a uprobe or is singlestepping post a uprobe
hit, the uprobe exception notifier sets its TIF_UPROBE bit,
which will then be checked on its return to userspace path
(do_notify_resume() ->uprobe_notify_resume()), where the
consumers handlers are run (in task context) based on the
defined filters.
Uprobe hits are thread specific and hence we need to maintain
information about if a task hit a uprobe, what uprobe was hit,
the slot where the original instruction was copied for xol so
that it can be singlestepped with appropriate fixups.
In some cases, special care is needed for instructions that are
executed out of line (xol). These are architecture specific
artefacts, such as handling RIP relative instructions on x86_64.
Since the instruction at which the uprobe was inserted is
executed out of line, architecture specific fixups are added so
that the thread continues normal execution in the presence of a
uprobe.
Postpone the signals until we execute the probed insn.
post_xol() path does a recalc_sigpending() before return to
user-mode, this ensures the signal can't be lost.
Uprobes relies on DIE_DEBUG notification to notify if a
singlestep is complete.
Adds x86 specific uprobe exception notifiers and appropriate
hooks needed to determine a uprobe hit and subsequent post
processing.
Add requisite x86 fixups for xol for uprobes. Specific cases
needing fixups include relative jumps (x86_64), calls, etc.
Where possible, we check and skip singlestepping the
breakpointed instructions. For now we skip single byte as well
as few multibyte nop instructions. However this can be extended
to other instructions too.
Credits to Oleg Nesterov for suggestions/patches related to
signal, breakpoint, singlestep handling code.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com
[ Performed various cleanliness edits ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
|
|
|
#endif /* !CONFIG_UPROBES */
|
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints
Add uprobes support to the core kernel, with x86 support.
This commit adds the kernel facilities, the actual uprobes
user-space ABI and perf probe support comes in later commits.
General design:
Uprobes are maintained in an rb-tree indexed by inode and offset
(the offset here is from the start of the mapping). For a unique
(inode, offset) tuple, there can be at most one uprobe in the
rb-tree.
Since the (inode, offset) tuple identifies a unique uprobe, more
than one user may be interested in the same uprobe. This provides
the ability to connect multiple 'consumers' to the same uprobe.
Each consumer defines a handler and a filter (optional). The
'handler' is run every time the uprobe is hit, if it matches the
'filter' criteria.
The first consumer of a uprobe causes the breakpoint to be
inserted at the specified address and subsequent consumers are
appended to this list. On subsequent probes, the consumer gets
appended to the existing list of consumers. The breakpoint is
removed when the last consumer unregisters. For all other
unregisterations, the consumer is removed from the list of
consumers.
Given a inode, we get a list of the mms that have mapped the
inode. Do the actual registration if mm maps the page where a
probe needs to be inserted/removed.
We use a temporary list to walk through the vmas that map the
inode.
- The number of maps that map the inode, is not known before we
walk the rmap and keeps changing.
- extending vm_area_struct wasn't recommended, it's a
size-critical data structure.
- There can be more than one maps of the inode in the same mm.
We add callbacks to the mmap methods to keep an eye on text vmas
that are of interest to uprobes. When a vma of interest is mapped,
we insert the breakpoint at the right address.
Uprobe works by replacing the instruction at the address defined
by (inode, offset) with the arch specific breakpoint
instruction. We save a copy of the original instruction at the
uprobed address.
This is needed for:
a. executing the instruction out-of-line (xol).
b. instruction analysis for any subsequent fixups.
c. restoring the instruction back when the uprobe is unregistered.
We insert or delete a breakpoint instruction, and this
breakpoint instruction is assumed to be the smallest instruction
available on the platform. For fixed size instruction platforms
this is trivially true, for variable size instruction platforms
the breakpoint instruction is typically the smallest (often a
single byte).
Writing the instruction is done by COWing the page and changing
the instruction during the copy, this even though most platforms
allow atomic writes of the breakpoint instruction. This also
mirrors the behaviour of a ptrace() memory write to a PRIVATE
file map.
The core worker is derived from KSM's replace_page() logic.
In essence, similar to KSM:
a. allocate a new page and copy over contents of the page that
has the uprobed vaddr
b. modify the copy and insert the breakpoint at the required
address
c. switch the original page with the copy containing the
breakpoint
d. flush page tables.
replace_page() is being replicated here because of some minor
changes in the type of pages and also because Hugh Dickins had
plans to improve replace_page() for KSM specific work.
Instruction analysis on x86 is based on instruction decoder and
determines if an instruction can be probed and determines the
necessary fixups after singlestep. Instruction analysis is done
at probe insertion time so that we avoid having to repeat the
same analysis every time a probe is hit.
A lot of code here is due to the improvement/suggestions/inputs
from Peter Zijlstra.
Changelog:
(v10):
- Add code to clear REX.B prefix as suggested by Denys Vlasenko
and Masami Hiramatsu.
(v9):
- Use insn_offset_modrm as suggested by Masami Hiramatsu.
(v7):
Handle comments from Peter Zijlstra:
- Dont take reference to inode. (expect inode to uprobe_register to be sane).
- Use PTR_ERR to set the return value.
- No need to take reference to inode.
- use PTR_ERR to return error value.
- register and uprobe_unregister share code.
(v5):
- Modified del_consumer as per comments from Peter.
- Drop reference to inode before dropping reference to uprobe.
- Use i_size_read(inode) instead of inode->i_size.
- Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called.
- Includes errno.h as recommended by Stephen Rothwell to fix a build issue
on sparc defconfig
- Remove restrictions while unregistering.
- Earlier code leaked inode references under some conditions while
registering/unregistering.
- Continue the vma-rmap walk even if the intermediate vma doesnt
meet the requirements.
- Validate the vma found by find_vma before inserting/removing the
breakpoint
- Call del_consumer under mutex_lock.
- Use hash locks.
- Handle mremap.
- Introduce find_least_offset_node() instead of close match logic in
find_uprobe
- Uprobes no more depends on MM_OWNER; No reference to task_structs
while inserting/removing a probe.
- Uses read_mapping_page instead of grab_cache_page so that the pages
have valid content.
- pass NULL to get_user_pages for the task parameter.
- call SetPageUptodate on the new page allocated in write_opcode.
- fix leaking a reference to the new page under certain conditions.
- Include Instruction Decoder if Uprobes gets defined.
- Remove const attributes for instruction prefix arrays.
- Uses mm_context to know if the application is 32 bit.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Also-written-by: Jim Keniston <jkenisto@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com
[ Made various small edits to the commit log ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
|
|
|
#endif /* _LINUX_UPROBES_H */
|