OpenCloudOS-Kernel/net/bridge/br_vlan.c

2087 lines
49 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/rtnetlink.h>
#include <linux/slab.h>
bridge: use either ndo VLAN ops or switchdev VLAN ops to install MASTER vlans v2: Move struct switchdev_obj automatics to inner scope where there used. v1: To maintain backward compatibility with the existing iproute2 "bridge vlan" command, let bridge's setlink/dellink handler call into either the port driver's 8021q ndo ops or the port driver's bridge_setlink/dellink ops. This allows port driver to choose 8021q ops or the newer bridge_setlink/dellink ops when implementing VLAN add/del filtering on the device. The iproute "bridge vlan" command does not need to be modified. To summarize using the "bridge vlan" command examples, we have: 1) bridge vlan add|del vid VID dev DEV Here iproute2 sets MASTER flag. Bridge's bridge_setlink/dellink is called. Vlan is set on bridge for port. If port driver implements ndo 8021q ops, call those to port driver can install vlan filter on device. Otherwise, if port driver implements bridge_setlink/dellink ops, call those to install vlan filter to device. This option only works if port is bridged. 2) bridge vlan add|del vid VID dev DEV master Same as 1) 3) bridge vlan add|del vid VID dev DEV self Bridge's bridge_setlink/dellink isn't called. Port driver's bridge_setlink/dellink is called, if implemented. This option works if port is bridged or not. If port is not bridged, a VLAN can still be added/deleted to device filter using this variant. 4) bridge vlan add|del vid VID dev DEV master self This is a combination of 1) and 3), but will only work if port is bridged. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-13 08:39:50 +08:00
#include <net/switchdev.h>
#include "br_private.h"
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 14:59:54 +08:00
#include "br_private_tunnel.h"
static void nbp_vlan_set_vlan_dev_state(struct net_bridge_port *p, u16 vid);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
static inline int br_vlan_cmp(struct rhashtable_compare_arg *arg,
const void *ptr)
{
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
const struct net_bridge_vlan *vle = ptr;
u16 vid = *(u16 *)arg->key;
return vle->vid != vid;
}
static const struct rhashtable_params br_vlan_rht_params = {
.head_offset = offsetof(struct net_bridge_vlan, vnode),
.key_offset = offsetof(struct net_bridge_vlan, vid),
.key_len = sizeof(u16),
.nelem_hint = 3,
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
.max_size = VLAN_N_VID,
.obj_cmpfn = br_vlan_cmp,
.automatic_shrinking = true,
};
static struct net_bridge_vlan *br_vlan_lookup(struct rhashtable *tbl, u16 vid)
{
return rhashtable_lookup_fast(tbl, &vid, br_vlan_rht_params);
}
static bool __vlan_add_pvid(struct net_bridge_vlan_group *vg,
const struct net_bridge_vlan *v)
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
{
if (vg->pvid == v->vid)
return false;
smp_wmb();
br_vlan_set_pvid_state(vg, v->state);
vg->pvid = v->vid;
return true;
}
static bool __vlan_delete_pvid(struct net_bridge_vlan_group *vg, u16 vid)
{
if (vg->pvid != vid)
return false;
smp_wmb();
vg->pvid = 0;
return true;
}
/* return true if anything changed, false otherwise */
static bool __vlan_add_flags(struct net_bridge_vlan *v, u16 flags)
{
struct net_bridge_vlan_group *vg;
u16 old_flags = v->flags;
bool ret;
if (br_vlan_is_master(v))
vg = br_vlan_group(v->br);
else
vg = nbp_vlan_group(v->port);
if (flags & BRIDGE_VLAN_INFO_PVID)
ret = __vlan_add_pvid(vg, v);
else
ret = __vlan_delete_pvid(vg, v->vid);
if (flags & BRIDGE_VLAN_INFO_UNTAGGED)
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
v->flags |= BRIDGE_VLAN_INFO_UNTAGGED;
else
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
v->flags &= ~BRIDGE_VLAN_INFO_UNTAGGED;
return ret || !!(old_flags ^ v->flags);
}
bridge: use either ndo VLAN ops or switchdev VLAN ops to install MASTER vlans v2: Move struct switchdev_obj automatics to inner scope where there used. v1: To maintain backward compatibility with the existing iproute2 "bridge vlan" command, let bridge's setlink/dellink handler call into either the port driver's 8021q ndo ops or the port driver's bridge_setlink/dellink ops. This allows port driver to choose 8021q ops or the newer bridge_setlink/dellink ops when implementing VLAN add/del filtering on the device. The iproute "bridge vlan" command does not need to be modified. To summarize using the "bridge vlan" command examples, we have: 1) bridge vlan add|del vid VID dev DEV Here iproute2 sets MASTER flag. Bridge's bridge_setlink/dellink is called. Vlan is set on bridge for port. If port driver implements ndo 8021q ops, call those to port driver can install vlan filter on device. Otherwise, if port driver implements bridge_setlink/dellink ops, call those to install vlan filter to device. This option only works if port is bridged. 2) bridge vlan add|del vid VID dev DEV master Same as 1) 3) bridge vlan add|del vid VID dev DEV self Bridge's bridge_setlink/dellink isn't called. Port driver's bridge_setlink/dellink is called, if implemented. This option works if port is bridged or not. If port is not bridged, a VLAN can still be added/deleted to device filter using this variant. 4) bridge vlan add|del vid VID dev DEV master self This is a combination of 1) and 3), but will only work if port is bridged. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-13 08:39:50 +08:00
static int __vlan_vid_add(struct net_device *dev, struct net_bridge *br,
net: bridge: Fix VLANs memory leak When adding / deleting VLANs to / from a bridge port, the bridge driver first tries to propagate the information via switchdev and falls back to the 8021q driver in case the underlying driver does not support switchdev. This can result in a memory leak [1] when VXLAN and mlxsw ports are enslaved to the bridge: $ ip link set dev vxlan0 master br0 # No mlxsw ports are enslaved to 'br0', so mlxsw ignores the switchdev # notification and the bridge driver adds the VLAN on 'vxlan0' via the # 8021q driver $ bridge vlan add vid 10 dev vxlan0 pvid untagged # mlxsw port is enslaved to the bridge $ ip link set dev swp1 master br0 # mlxsw processes the switchdev notification and the 8021q driver is # skipped $ bridge vlan del vid 10 dev vxlan0 This results in 'struct vlan_info' and 'struct vlan_vid_info' being leaked, as they were allocated by the 8021q driver during VLAN addition, but never freed as the 8021q driver was skipped during deletion. Fix this by introducing a new VLAN private flag that indicates whether the VLAN was added on the port by switchdev or the 8021q driver. If the VLAN was added by the 8021q driver, then we make sure to delete it via the 8021q driver as well. [1] unreferenced object 0xffff88822d20b1e8 (size 256): comm "bridge", pid 2532, jiffies 4295216998 (age 1188.830s) hex dump (first 32 bytes): e0 42 97 ce 81 88 ff ff 00 00 00 00 00 00 00 00 .B.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330 [<00000000e0178b02>] vlan_vid_add+0x661/0x920 [<00000000218ebd5f>] __vlan_add+0x1be9/0x3a00 [<000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90 [<000000003535392c>] br_vlan_info+0x132/0x410 [<00000000aedaa9dc>] br_afspec+0x75c/0x870 [<00000000f5716133>] br_setlink+0x3dc/0x6d0 [<00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30 [<00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80 [<0000000064097e69>] netlink_rcv_skb+0x152/0x3c0 [<000000008be8d614>] rtnetlink_rcv+0x21/0x30 [<000000009ab2ca25>] netlink_unicast+0x52f/0x740 [<00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50 [<000000005d1e2050>] sock_sendmsg+0xbe/0x120 [<00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0 [<00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270 unreferenced object 0xffff888227454308 (size 32): comm "bridge", pid 2532, jiffies 4295216998 (age 1188.882s) hex dump (first 32 bytes): 88 b2 20 2d 82 88 ff ff 88 b2 20 2d 82 88 ff ff .. -...... -.... 81 00 0a 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330 [<0000000018050631>] vlan_vid_add+0x3e6/0x920 [<00000000218ebd5f>] __vlan_add+0x1be9/0x3a00 [<000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90 [<000000003535392c>] br_vlan_info+0x132/0x410 [<00000000aedaa9dc>] br_afspec+0x75c/0x870 [<00000000f5716133>] br_setlink+0x3dc/0x6d0 [<00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30 [<00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80 [<0000000064097e69>] netlink_rcv_skb+0x152/0x3c0 [<000000008be8d614>] rtnetlink_rcv+0x21/0x30 [<000000009ab2ca25>] netlink_unicast+0x52f/0x740 [<00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50 [<000000005d1e2050>] sock_sendmsg+0xbe/0x120 [<00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0 [<00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270 Fixes: d70e42b22dd4 ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: bridge@lists.linux-foundation.org Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-09 00:48:11 +08:00
struct net_bridge_vlan *v, u16 flags,
struct netlink_ext_ack *extack)
bridge: use either ndo VLAN ops or switchdev VLAN ops to install MASTER vlans v2: Move struct switchdev_obj automatics to inner scope where there used. v1: To maintain backward compatibility with the existing iproute2 "bridge vlan" command, let bridge's setlink/dellink handler call into either the port driver's 8021q ndo ops or the port driver's bridge_setlink/dellink ops. This allows port driver to choose 8021q ops or the newer bridge_setlink/dellink ops when implementing VLAN add/del filtering on the device. The iproute "bridge vlan" command does not need to be modified. To summarize using the "bridge vlan" command examples, we have: 1) bridge vlan add|del vid VID dev DEV Here iproute2 sets MASTER flag. Bridge's bridge_setlink/dellink is called. Vlan is set on bridge for port. If port driver implements ndo 8021q ops, call those to port driver can install vlan filter on device. Otherwise, if port driver implements bridge_setlink/dellink ops, call those to install vlan filter to device. This option only works if port is bridged. 2) bridge vlan add|del vid VID dev DEV master Same as 1) 3) bridge vlan add|del vid VID dev DEV self Bridge's bridge_setlink/dellink isn't called. Port driver's bridge_setlink/dellink is called, if implemented. This option works if port is bridged or not. If port is not bridged, a VLAN can still be added/deleted to device filter using this variant. 4) bridge vlan add|del vid VID dev DEV master self This is a combination of 1) and 3), but will only work if port is bridged. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-13 08:39:50 +08:00
{
int err;
/* Try switchdev op first. In case it is not supported, fallback to
* 8021q add.
bridge: use either ndo VLAN ops or switchdev VLAN ops to install MASTER vlans v2: Move struct switchdev_obj automatics to inner scope where there used. v1: To maintain backward compatibility with the existing iproute2 "bridge vlan" command, let bridge's setlink/dellink handler call into either the port driver's 8021q ndo ops or the port driver's bridge_setlink/dellink ops. This allows port driver to choose 8021q ops or the newer bridge_setlink/dellink ops when implementing VLAN add/del filtering on the device. The iproute "bridge vlan" command does not need to be modified. To summarize using the "bridge vlan" command examples, we have: 1) bridge vlan add|del vid VID dev DEV Here iproute2 sets MASTER flag. Bridge's bridge_setlink/dellink is called. Vlan is set on bridge for port. If port driver implements ndo 8021q ops, call those to port driver can install vlan filter on device. Otherwise, if port driver implements bridge_setlink/dellink ops, call those to install vlan filter to device. This option only works if port is bridged. 2) bridge vlan add|del vid VID dev DEV master Same as 1) 3) bridge vlan add|del vid VID dev DEV self Bridge's bridge_setlink/dellink isn't called. Port driver's bridge_setlink/dellink is called, if implemented. This option works if port is bridged or not. If port is not bridged, a VLAN can still be added/deleted to device filter using this variant. 4) bridge vlan add|del vid VID dev DEV master self This is a combination of 1) and 3), but will only work if port is bridged. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-13 08:39:50 +08:00
*/
net: bridge: Fix VLANs memory leak When adding / deleting VLANs to / from a bridge port, the bridge driver first tries to propagate the information via switchdev and falls back to the 8021q driver in case the underlying driver does not support switchdev. This can result in a memory leak [1] when VXLAN and mlxsw ports are enslaved to the bridge: $ ip link set dev vxlan0 master br0 # No mlxsw ports are enslaved to 'br0', so mlxsw ignores the switchdev # notification and the bridge driver adds the VLAN on 'vxlan0' via the # 8021q driver $ bridge vlan add vid 10 dev vxlan0 pvid untagged # mlxsw port is enslaved to the bridge $ ip link set dev swp1 master br0 # mlxsw processes the switchdev notification and the 8021q driver is # skipped $ bridge vlan del vid 10 dev vxlan0 This results in 'struct vlan_info' and 'struct vlan_vid_info' being leaked, as they were allocated by the 8021q driver during VLAN addition, but never freed as the 8021q driver was skipped during deletion. Fix this by introducing a new VLAN private flag that indicates whether the VLAN was added on the port by switchdev or the 8021q driver. If the VLAN was added by the 8021q driver, then we make sure to delete it via the 8021q driver as well. [1] unreferenced object 0xffff88822d20b1e8 (size 256): comm "bridge", pid 2532, jiffies 4295216998 (age 1188.830s) hex dump (first 32 bytes): e0 42 97 ce 81 88 ff ff 00 00 00 00 00 00 00 00 .B.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330 [<00000000e0178b02>] vlan_vid_add+0x661/0x920 [<00000000218ebd5f>] __vlan_add+0x1be9/0x3a00 [<000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90 [<000000003535392c>] br_vlan_info+0x132/0x410 [<00000000aedaa9dc>] br_afspec+0x75c/0x870 [<00000000f5716133>] br_setlink+0x3dc/0x6d0 [<00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30 [<00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80 [<0000000064097e69>] netlink_rcv_skb+0x152/0x3c0 [<000000008be8d614>] rtnetlink_rcv+0x21/0x30 [<000000009ab2ca25>] netlink_unicast+0x52f/0x740 [<00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50 [<000000005d1e2050>] sock_sendmsg+0xbe/0x120 [<00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0 [<00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270 unreferenced object 0xffff888227454308 (size 32): comm "bridge", pid 2532, jiffies 4295216998 (age 1188.882s) hex dump (first 32 bytes): 88 b2 20 2d 82 88 ff ff 88 b2 20 2d 82 88 ff ff .. -...... -.... 81 00 0a 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330 [<0000000018050631>] vlan_vid_add+0x3e6/0x920 [<00000000218ebd5f>] __vlan_add+0x1be9/0x3a00 [<000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90 [<000000003535392c>] br_vlan_info+0x132/0x410 [<00000000aedaa9dc>] br_afspec+0x75c/0x870 [<00000000f5716133>] br_setlink+0x3dc/0x6d0 [<00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30 [<00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80 [<0000000064097e69>] netlink_rcv_skb+0x152/0x3c0 [<000000008be8d614>] rtnetlink_rcv+0x21/0x30 [<000000009ab2ca25>] netlink_unicast+0x52f/0x740 [<00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50 [<000000005d1e2050>] sock_sendmsg+0xbe/0x120 [<00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0 [<00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270 Fixes: d70e42b22dd4 ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: bridge@lists.linux-foundation.org Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-09 00:48:11 +08:00
err = br_switchdev_port_vlan_add(dev, v->vid, flags, extack);
if (err == -EOPNOTSUPP)
net: bridge: Fix VLANs memory leak When adding / deleting VLANs to / from a bridge port, the bridge driver first tries to propagate the information via switchdev and falls back to the 8021q driver in case the underlying driver does not support switchdev. This can result in a memory leak [1] when VXLAN and mlxsw ports are enslaved to the bridge: $ ip link set dev vxlan0 master br0 # No mlxsw ports are enslaved to 'br0', so mlxsw ignores the switchdev # notification and the bridge driver adds the VLAN on 'vxlan0' via the # 8021q driver $ bridge vlan add vid 10 dev vxlan0 pvid untagged # mlxsw port is enslaved to the bridge $ ip link set dev swp1 master br0 # mlxsw processes the switchdev notification and the 8021q driver is # skipped $ bridge vlan del vid 10 dev vxlan0 This results in 'struct vlan_info' and 'struct vlan_vid_info' being leaked, as they were allocated by the 8021q driver during VLAN addition, but never freed as the 8021q driver was skipped during deletion. Fix this by introducing a new VLAN private flag that indicates whether the VLAN was added on the port by switchdev or the 8021q driver. If the VLAN was added by the 8021q driver, then we make sure to delete it via the 8021q driver as well. [1] unreferenced object 0xffff88822d20b1e8 (size 256): comm "bridge", pid 2532, jiffies 4295216998 (age 1188.830s) hex dump (first 32 bytes): e0 42 97 ce 81 88 ff ff 00 00 00 00 00 00 00 00 .B.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330 [<00000000e0178b02>] vlan_vid_add+0x661/0x920 [<00000000218ebd5f>] __vlan_add+0x1be9/0x3a00 [<000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90 [<000000003535392c>] br_vlan_info+0x132/0x410 [<00000000aedaa9dc>] br_afspec+0x75c/0x870 [<00000000f5716133>] br_setlink+0x3dc/0x6d0 [<00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30 [<00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80 [<0000000064097e69>] netlink_rcv_skb+0x152/0x3c0 [<000000008be8d614>] rtnetlink_rcv+0x21/0x30 [<000000009ab2ca25>] netlink_unicast+0x52f/0x740 [<00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50 [<000000005d1e2050>] sock_sendmsg+0xbe/0x120 [<00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0 [<00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270 unreferenced object 0xffff888227454308 (size 32): comm "bridge", pid 2532, jiffies 4295216998 (age 1188.882s) hex dump (first 32 bytes): 88 b2 20 2d 82 88 ff ff 88 b2 20 2d 82 88 ff ff .. -...... -.... 81 00 0a 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330 [<0000000018050631>] vlan_vid_add+0x3e6/0x920 [<00000000218ebd5f>] __vlan_add+0x1be9/0x3a00 [<000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90 [<000000003535392c>] br_vlan_info+0x132/0x410 [<00000000aedaa9dc>] br_afspec+0x75c/0x870 [<00000000f5716133>] br_setlink+0x3dc/0x6d0 [<00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30 [<00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80 [<0000000064097e69>] netlink_rcv_skb+0x152/0x3c0 [<000000008be8d614>] rtnetlink_rcv+0x21/0x30 [<000000009ab2ca25>] netlink_unicast+0x52f/0x740 [<00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50 [<000000005d1e2050>] sock_sendmsg+0xbe/0x120 [<00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0 [<00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270 Fixes: d70e42b22dd4 ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: bridge@lists.linux-foundation.org Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-09 00:48:11 +08:00
return vlan_vid_add(dev, br->vlan_proto, v->vid);
v->priv_flags |= BR_VLFLAG_ADDED_BY_SWITCHDEV;
bridge: use either ndo VLAN ops or switchdev VLAN ops to install MASTER vlans v2: Move struct switchdev_obj automatics to inner scope where there used. v1: To maintain backward compatibility with the existing iproute2 "bridge vlan" command, let bridge's setlink/dellink handler call into either the port driver's 8021q ndo ops or the port driver's bridge_setlink/dellink ops. This allows port driver to choose 8021q ops or the newer bridge_setlink/dellink ops when implementing VLAN add/del filtering on the device. The iproute "bridge vlan" command does not need to be modified. To summarize using the "bridge vlan" command examples, we have: 1) bridge vlan add|del vid VID dev DEV Here iproute2 sets MASTER flag. Bridge's bridge_setlink/dellink is called. Vlan is set on bridge for port. If port driver implements ndo 8021q ops, call those to port driver can install vlan filter on device. Otherwise, if port driver implements bridge_setlink/dellink ops, call those to install vlan filter to device. This option only works if port is bridged. 2) bridge vlan add|del vid VID dev DEV master Same as 1) 3) bridge vlan add|del vid VID dev DEV self Bridge's bridge_setlink/dellink isn't called. Port driver's bridge_setlink/dellink is called, if implemented. This option works if port is bridged or not. If port is not bridged, a VLAN can still be added/deleted to device filter using this variant. 4) bridge vlan add|del vid VID dev DEV master self This is a combination of 1) and 3), but will only work if port is bridged. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-13 08:39:50 +08:00
return err;
}
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
static void __vlan_add_list(struct net_bridge_vlan *v)
{
struct net_bridge_vlan_group *vg;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
struct list_head *headp, *hpos;
struct net_bridge_vlan *vent;
if (br_vlan_is_master(v))
vg = br_vlan_group(v->br);
else
vg = nbp_vlan_group(v->port);
headp = &vg->vlan_list;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
list_for_each_prev(hpos, headp) {
vent = list_entry(hpos, struct net_bridge_vlan, vlist);
if (v->vid < vent->vid)
continue;
else
break;
}
list_add_rcu(&v->vlist, hpos);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
}
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
static void __vlan_del_list(struct net_bridge_vlan *v)
{
list_del_rcu(&v->vlist);
}
static int __vlan_vid_del(struct net_device *dev, struct net_bridge *br,
net: bridge: Fix VLANs memory leak When adding / deleting VLANs to / from a bridge port, the bridge driver first tries to propagate the information via switchdev and falls back to the 8021q driver in case the underlying driver does not support switchdev. This can result in a memory leak [1] when VXLAN and mlxsw ports are enslaved to the bridge: $ ip link set dev vxlan0 master br0 # No mlxsw ports are enslaved to 'br0', so mlxsw ignores the switchdev # notification and the bridge driver adds the VLAN on 'vxlan0' via the # 8021q driver $ bridge vlan add vid 10 dev vxlan0 pvid untagged # mlxsw port is enslaved to the bridge $ ip link set dev swp1 master br0 # mlxsw processes the switchdev notification and the 8021q driver is # skipped $ bridge vlan del vid 10 dev vxlan0 This results in 'struct vlan_info' and 'struct vlan_vid_info' being leaked, as they were allocated by the 8021q driver during VLAN addition, but never freed as the 8021q driver was skipped during deletion. Fix this by introducing a new VLAN private flag that indicates whether the VLAN was added on the port by switchdev or the 8021q driver. If the VLAN was added by the 8021q driver, then we make sure to delete it via the 8021q driver as well. [1] unreferenced object 0xffff88822d20b1e8 (size 256): comm "bridge", pid 2532, jiffies 4295216998 (age 1188.830s) hex dump (first 32 bytes): e0 42 97 ce 81 88 ff ff 00 00 00 00 00 00 00 00 .B.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330 [<00000000e0178b02>] vlan_vid_add+0x661/0x920 [<00000000218ebd5f>] __vlan_add+0x1be9/0x3a00 [<000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90 [<000000003535392c>] br_vlan_info+0x132/0x410 [<00000000aedaa9dc>] br_afspec+0x75c/0x870 [<00000000f5716133>] br_setlink+0x3dc/0x6d0 [<00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30 [<00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80 [<0000000064097e69>] netlink_rcv_skb+0x152/0x3c0 [<000000008be8d614>] rtnetlink_rcv+0x21/0x30 [<000000009ab2ca25>] netlink_unicast+0x52f/0x740 [<00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50 [<000000005d1e2050>] sock_sendmsg+0xbe/0x120 [<00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0 [<00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270 unreferenced object 0xffff888227454308 (size 32): comm "bridge", pid 2532, jiffies 4295216998 (age 1188.882s) hex dump (first 32 bytes): 88 b2 20 2d 82 88 ff ff 88 b2 20 2d 82 88 ff ff .. -...... -.... 81 00 0a 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330 [<0000000018050631>] vlan_vid_add+0x3e6/0x920 [<00000000218ebd5f>] __vlan_add+0x1be9/0x3a00 [<000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90 [<000000003535392c>] br_vlan_info+0x132/0x410 [<00000000aedaa9dc>] br_afspec+0x75c/0x870 [<00000000f5716133>] br_setlink+0x3dc/0x6d0 [<00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30 [<00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80 [<0000000064097e69>] netlink_rcv_skb+0x152/0x3c0 [<000000008be8d614>] rtnetlink_rcv+0x21/0x30 [<000000009ab2ca25>] netlink_unicast+0x52f/0x740 [<00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50 [<000000005d1e2050>] sock_sendmsg+0xbe/0x120 [<00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0 [<00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270 Fixes: d70e42b22dd4 ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: bridge@lists.linux-foundation.org Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-09 00:48:11 +08:00
const struct net_bridge_vlan *v)
bridge: use either ndo VLAN ops or switchdev VLAN ops to install MASTER vlans v2: Move struct switchdev_obj automatics to inner scope where there used. v1: To maintain backward compatibility with the existing iproute2 "bridge vlan" command, let bridge's setlink/dellink handler call into either the port driver's 8021q ndo ops or the port driver's bridge_setlink/dellink ops. This allows port driver to choose 8021q ops or the newer bridge_setlink/dellink ops when implementing VLAN add/del filtering on the device. The iproute "bridge vlan" command does not need to be modified. To summarize using the "bridge vlan" command examples, we have: 1) bridge vlan add|del vid VID dev DEV Here iproute2 sets MASTER flag. Bridge's bridge_setlink/dellink is called. Vlan is set on bridge for port. If port driver implements ndo 8021q ops, call those to port driver can install vlan filter on device. Otherwise, if port driver implements bridge_setlink/dellink ops, call those to install vlan filter to device. This option only works if port is bridged. 2) bridge vlan add|del vid VID dev DEV master Same as 1) 3) bridge vlan add|del vid VID dev DEV self Bridge's bridge_setlink/dellink isn't called. Port driver's bridge_setlink/dellink is called, if implemented. This option works if port is bridged or not. If port is not bridged, a VLAN can still be added/deleted to device filter using this variant. 4) bridge vlan add|del vid VID dev DEV master self This is a combination of 1) and 3), but will only work if port is bridged. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-13 08:39:50 +08:00
{
int err;
bridge: use either ndo VLAN ops or switchdev VLAN ops to install MASTER vlans v2: Move struct switchdev_obj automatics to inner scope where there used. v1: To maintain backward compatibility with the existing iproute2 "bridge vlan" command, let bridge's setlink/dellink handler call into either the port driver's 8021q ndo ops or the port driver's bridge_setlink/dellink ops. This allows port driver to choose 8021q ops or the newer bridge_setlink/dellink ops when implementing VLAN add/del filtering on the device. The iproute "bridge vlan" command does not need to be modified. To summarize using the "bridge vlan" command examples, we have: 1) bridge vlan add|del vid VID dev DEV Here iproute2 sets MASTER flag. Bridge's bridge_setlink/dellink is called. Vlan is set on bridge for port. If port driver implements ndo 8021q ops, call those to port driver can install vlan filter on device. Otherwise, if port driver implements bridge_setlink/dellink ops, call those to install vlan filter to device. This option only works if port is bridged. 2) bridge vlan add|del vid VID dev DEV master Same as 1) 3) bridge vlan add|del vid VID dev DEV self Bridge's bridge_setlink/dellink isn't called. Port driver's bridge_setlink/dellink is called, if implemented. This option works if port is bridged or not. If port is not bridged, a VLAN can still be added/deleted to device filter using this variant. 4) bridge vlan add|del vid VID dev DEV master self This is a combination of 1) and 3), but will only work if port is bridged. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-13 08:39:50 +08:00
/* Try switchdev op first. In case it is not supported, fallback to
* 8021q del.
bridge: use either ndo VLAN ops or switchdev VLAN ops to install MASTER vlans v2: Move struct switchdev_obj automatics to inner scope where there used. v1: To maintain backward compatibility with the existing iproute2 "bridge vlan" command, let bridge's setlink/dellink handler call into either the port driver's 8021q ndo ops or the port driver's bridge_setlink/dellink ops. This allows port driver to choose 8021q ops or the newer bridge_setlink/dellink ops when implementing VLAN add/del filtering on the device. The iproute "bridge vlan" command does not need to be modified. To summarize using the "bridge vlan" command examples, we have: 1) bridge vlan add|del vid VID dev DEV Here iproute2 sets MASTER flag. Bridge's bridge_setlink/dellink is called. Vlan is set on bridge for port. If port driver implements ndo 8021q ops, call those to port driver can install vlan filter on device. Otherwise, if port driver implements bridge_setlink/dellink ops, call those to install vlan filter to device. This option only works if port is bridged. 2) bridge vlan add|del vid VID dev DEV master Same as 1) 3) bridge vlan add|del vid VID dev DEV self Bridge's bridge_setlink/dellink isn't called. Port driver's bridge_setlink/dellink is called, if implemented. This option works if port is bridged or not. If port is not bridged, a VLAN can still be added/deleted to device filter using this variant. 4) bridge vlan add|del vid VID dev DEV master self This is a combination of 1) and 3), but will only work if port is bridged. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-13 08:39:50 +08:00
*/
net: bridge: Fix VLANs memory leak When adding / deleting VLANs to / from a bridge port, the bridge driver first tries to propagate the information via switchdev and falls back to the 8021q driver in case the underlying driver does not support switchdev. This can result in a memory leak [1] when VXLAN and mlxsw ports are enslaved to the bridge: $ ip link set dev vxlan0 master br0 # No mlxsw ports are enslaved to 'br0', so mlxsw ignores the switchdev # notification and the bridge driver adds the VLAN on 'vxlan0' via the # 8021q driver $ bridge vlan add vid 10 dev vxlan0 pvid untagged # mlxsw port is enslaved to the bridge $ ip link set dev swp1 master br0 # mlxsw processes the switchdev notification and the 8021q driver is # skipped $ bridge vlan del vid 10 dev vxlan0 This results in 'struct vlan_info' and 'struct vlan_vid_info' being leaked, as they were allocated by the 8021q driver during VLAN addition, but never freed as the 8021q driver was skipped during deletion. Fix this by introducing a new VLAN private flag that indicates whether the VLAN was added on the port by switchdev or the 8021q driver. If the VLAN was added by the 8021q driver, then we make sure to delete it via the 8021q driver as well. [1] unreferenced object 0xffff88822d20b1e8 (size 256): comm "bridge", pid 2532, jiffies 4295216998 (age 1188.830s) hex dump (first 32 bytes): e0 42 97 ce 81 88 ff ff 00 00 00 00 00 00 00 00 .B.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330 [<00000000e0178b02>] vlan_vid_add+0x661/0x920 [<00000000218ebd5f>] __vlan_add+0x1be9/0x3a00 [<000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90 [<000000003535392c>] br_vlan_info+0x132/0x410 [<00000000aedaa9dc>] br_afspec+0x75c/0x870 [<00000000f5716133>] br_setlink+0x3dc/0x6d0 [<00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30 [<00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80 [<0000000064097e69>] netlink_rcv_skb+0x152/0x3c0 [<000000008be8d614>] rtnetlink_rcv+0x21/0x30 [<000000009ab2ca25>] netlink_unicast+0x52f/0x740 [<00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50 [<000000005d1e2050>] sock_sendmsg+0xbe/0x120 [<00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0 [<00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270 unreferenced object 0xffff888227454308 (size 32): comm "bridge", pid 2532, jiffies 4295216998 (age 1188.882s) hex dump (first 32 bytes): 88 b2 20 2d 82 88 ff ff 88 b2 20 2d 82 88 ff ff .. -...... -.... 81 00 0a 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330 [<0000000018050631>] vlan_vid_add+0x3e6/0x920 [<00000000218ebd5f>] __vlan_add+0x1be9/0x3a00 [<000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90 [<000000003535392c>] br_vlan_info+0x132/0x410 [<00000000aedaa9dc>] br_afspec+0x75c/0x870 [<00000000f5716133>] br_setlink+0x3dc/0x6d0 [<00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30 [<00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80 [<0000000064097e69>] netlink_rcv_skb+0x152/0x3c0 [<000000008be8d614>] rtnetlink_rcv+0x21/0x30 [<000000009ab2ca25>] netlink_unicast+0x52f/0x740 [<00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50 [<000000005d1e2050>] sock_sendmsg+0xbe/0x120 [<00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0 [<00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270 Fixes: d70e42b22dd4 ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: bridge@lists.linux-foundation.org Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-09 00:48:11 +08:00
err = br_switchdev_port_vlan_del(dev, v->vid);
if (!(v->priv_flags & BR_VLFLAG_ADDED_BY_SWITCHDEV))
vlan_vid_del(dev, br->vlan_proto, v->vid);
return err == -EOPNOTSUPP ? 0 : err;
bridge: use either ndo VLAN ops or switchdev VLAN ops to install MASTER vlans v2: Move struct switchdev_obj automatics to inner scope where there used. v1: To maintain backward compatibility with the existing iproute2 "bridge vlan" command, let bridge's setlink/dellink handler call into either the port driver's 8021q ndo ops or the port driver's bridge_setlink/dellink ops. This allows port driver to choose 8021q ops or the newer bridge_setlink/dellink ops when implementing VLAN add/del filtering on the device. The iproute "bridge vlan" command does not need to be modified. To summarize using the "bridge vlan" command examples, we have: 1) bridge vlan add|del vid VID dev DEV Here iproute2 sets MASTER flag. Bridge's bridge_setlink/dellink is called. Vlan is set on bridge for port. If port driver implements ndo 8021q ops, call those to port driver can install vlan filter on device. Otherwise, if port driver implements bridge_setlink/dellink ops, call those to install vlan filter to device. This option only works if port is bridged. 2) bridge vlan add|del vid VID dev DEV master Same as 1) 3) bridge vlan add|del vid VID dev DEV self Bridge's bridge_setlink/dellink isn't called. Port driver's bridge_setlink/dellink is called, if implemented. This option works if port is bridged or not. If port is not bridged, a VLAN can still be added/deleted to device filter using this variant. 4) bridge vlan add|del vid VID dev DEV master self This is a combination of 1) and 3), but will only work if port is bridged. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-13 08:39:50 +08:00
}
/* Returns a master vlan, if it didn't exist it gets created. In all cases
* a reference is taken to the master vlan before returning.
*/
static struct net_bridge_vlan *
br_vlan_get_master(struct net_bridge *br, u16 vid,
struct netlink_ext_ack *extack)
{
struct net_bridge_vlan_group *vg;
struct net_bridge_vlan *masterv;
vg = br_vlan_group(br);
masterv = br_vlan_find(vg, vid);
if (!masterv) {
bool changed;
/* missing global ctx, create it now */
if (br_vlan_add(br, vid, 0, &changed, extack))
return NULL;
masterv = br_vlan_find(vg, vid);
if (WARN_ON(!masterv))
return NULL;
refcount_set(&masterv->refcnt, 1);
return masterv;
}
refcount_inc(&masterv->refcnt);
return masterv;
}
static void br_master_vlan_rcu_free(struct rcu_head *rcu)
{
struct net_bridge_vlan *v;
v = container_of(rcu, struct net_bridge_vlan, rcu);
WARN_ON(!br_vlan_is_master(v));
free_percpu(v->stats);
v->stats = NULL;
kfree(v);
}
static void br_vlan_put_master(struct net_bridge_vlan *masterv)
{
struct net_bridge_vlan_group *vg;
if (!br_vlan_is_master(masterv))
return;
vg = br_vlan_group(masterv->br);
if (refcount_dec_and_test(&masterv->refcnt)) {
rhashtable_remove_fast(&vg->vlan_hash,
&masterv->vnode, br_vlan_rht_params);
__vlan_del_list(masterv);
call_rcu(&masterv->rcu, br_master_vlan_rcu_free);
}
}
static void nbp_vlan_rcu_free(struct rcu_head *rcu)
{
struct net_bridge_vlan *v;
v = container_of(rcu, struct net_bridge_vlan, rcu);
WARN_ON(br_vlan_is_master(v));
/* if we had per-port stats configured then free them here */
if (v->priv_flags & BR_VLFLAG_PER_PORT_STATS)
free_percpu(v->stats);
v->stats = NULL;
kfree(v);
}
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
/* This is the shared VLAN add function which works for both ports and bridge
* devices. There are four possible calls to this function in terms of the
* vlan entry type:
* 1. vlan is being added on a port (no master flags, global entry exists)
* 2. vlan is being added on a bridge (both master and brentry flags)
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
* 3. vlan is being added on a port, but a global entry didn't exist which
* is being created right now (master flag set, brentry flag unset), the
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
* global entry is used for global per-vlan features, but not for filtering
* 4. same as 3 but with both master and brentry flags set so the entry
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
* will be used for filtering in both the port and the bridge
*/
static int __vlan_add(struct net_bridge_vlan *v, u16 flags,
struct netlink_ext_ack *extack)
{
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
struct net_bridge_vlan *masterv = NULL;
struct net_bridge_port *p = NULL;
struct net_bridge_vlan_group *vg;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
struct net_device *dev;
struct net_bridge *br;
int err;
if (br_vlan_is_master(v)) {
br = v->br;
dev = br->dev;
vg = br_vlan_group(br);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
} else {
p = v->port;
br = p->br;
dev = p->dev;
vg = nbp_vlan_group(p);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
}
if (p) {
/* Add VLAN to the device filter if it is supported.
* This ensures tagged traffic enters the bridge when
* promiscuous mode is disabled by br_manage_promisc().
*/
net: bridge: Fix VLANs memory leak When adding / deleting VLANs to / from a bridge port, the bridge driver first tries to propagate the information via switchdev and falls back to the 8021q driver in case the underlying driver does not support switchdev. This can result in a memory leak [1] when VXLAN and mlxsw ports are enslaved to the bridge: $ ip link set dev vxlan0 master br0 # No mlxsw ports are enslaved to 'br0', so mlxsw ignores the switchdev # notification and the bridge driver adds the VLAN on 'vxlan0' via the # 8021q driver $ bridge vlan add vid 10 dev vxlan0 pvid untagged # mlxsw port is enslaved to the bridge $ ip link set dev swp1 master br0 # mlxsw processes the switchdev notification and the 8021q driver is # skipped $ bridge vlan del vid 10 dev vxlan0 This results in 'struct vlan_info' and 'struct vlan_vid_info' being leaked, as they were allocated by the 8021q driver during VLAN addition, but never freed as the 8021q driver was skipped during deletion. Fix this by introducing a new VLAN private flag that indicates whether the VLAN was added on the port by switchdev or the 8021q driver. If the VLAN was added by the 8021q driver, then we make sure to delete it via the 8021q driver as well. [1] unreferenced object 0xffff88822d20b1e8 (size 256): comm "bridge", pid 2532, jiffies 4295216998 (age 1188.830s) hex dump (first 32 bytes): e0 42 97 ce 81 88 ff ff 00 00 00 00 00 00 00 00 .B.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330 [<00000000e0178b02>] vlan_vid_add+0x661/0x920 [<00000000218ebd5f>] __vlan_add+0x1be9/0x3a00 [<000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90 [<000000003535392c>] br_vlan_info+0x132/0x410 [<00000000aedaa9dc>] br_afspec+0x75c/0x870 [<00000000f5716133>] br_setlink+0x3dc/0x6d0 [<00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30 [<00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80 [<0000000064097e69>] netlink_rcv_skb+0x152/0x3c0 [<000000008be8d614>] rtnetlink_rcv+0x21/0x30 [<000000009ab2ca25>] netlink_unicast+0x52f/0x740 [<00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50 [<000000005d1e2050>] sock_sendmsg+0xbe/0x120 [<00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0 [<00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270 unreferenced object 0xffff888227454308 (size 32): comm "bridge", pid 2532, jiffies 4295216998 (age 1188.882s) hex dump (first 32 bytes): 88 b2 20 2d 82 88 ff ff 88 b2 20 2d 82 88 ff ff .. -...... -.... 81 00 0a 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330 [<0000000018050631>] vlan_vid_add+0x3e6/0x920 [<00000000218ebd5f>] __vlan_add+0x1be9/0x3a00 [<000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90 [<000000003535392c>] br_vlan_info+0x132/0x410 [<00000000aedaa9dc>] br_afspec+0x75c/0x870 [<00000000f5716133>] br_setlink+0x3dc/0x6d0 [<00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30 [<00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80 [<0000000064097e69>] netlink_rcv_skb+0x152/0x3c0 [<000000008be8d614>] rtnetlink_rcv+0x21/0x30 [<000000009ab2ca25>] netlink_unicast+0x52f/0x740 [<00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50 [<000000005d1e2050>] sock_sendmsg+0xbe/0x120 [<00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0 [<00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270 Fixes: d70e42b22dd4 ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: bridge@lists.linux-foundation.org Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-09 00:48:11 +08:00
err = __vlan_vid_add(dev, br, v, flags, extack);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
if (err)
goto out;
/* need to work on the master vlan too */
if (flags & BRIDGE_VLAN_INFO_MASTER) {
bool changed;
err = br_vlan_add(br, v->vid,
flags | BRIDGE_VLAN_INFO_BRENTRY,
&changed, extack);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
if (err)
goto out_filt;
if (changed)
br_vlan_notify(br, NULL, v->vid, 0,
RTM_NEWVLAN);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
}
masterv = br_vlan_get_master(br, v->vid, extack);
if (!masterv) {
err = -ENOMEM;
goto out_filt;
}
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
v->brvlan = masterv;
if (br_opt_get(br, BROPT_VLAN_STATS_PER_PORT)) {
v->stats =
netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
if (!v->stats) {
err = -ENOMEM;
goto out_filt;
}
v->priv_flags |= BR_VLFLAG_PER_PORT_STATS;
} else {
v->stats = masterv->stats;
}
} else {
err = br_switchdev_port_vlan_add(dev, v->vid, flags, extack);
if (err && err != -EOPNOTSUPP)
goto out;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
}
/* Add the dev mac and count the vlan only if it's usable */
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
if (br_vlan_should_use(v)) {
err = br_fdb_insert(br, p, dev->dev_addr, v->vid);
if (err) {
br_err(br, "failed insert local address into bridge forwarding table\n");
goto out_filt;
}
vg->num_vlans++;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
}
/* set the state before publishing */
v->state = BR_STATE_FORWARDING;
err = rhashtable_lookup_insert_fast(&vg->vlan_hash, &v->vnode,
br_vlan_rht_params);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
if (err)
goto out_fdb_insert;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
__vlan_add_list(v);
__vlan_add_flags(v, flags);
if (p)
nbp_vlan_set_vlan_dev_state(p, v->vid);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
out:
return err;
out_fdb_insert:
if (br_vlan_should_use(v)) {
br_fdb_find_delete_local(br, p, dev->dev_addr, v->vid);
vg->num_vlans--;
}
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
out_filt:
if (p) {
net: bridge: Fix VLANs memory leak When adding / deleting VLANs to / from a bridge port, the bridge driver first tries to propagate the information via switchdev and falls back to the 8021q driver in case the underlying driver does not support switchdev. This can result in a memory leak [1] when VXLAN and mlxsw ports are enslaved to the bridge: $ ip link set dev vxlan0 master br0 # No mlxsw ports are enslaved to 'br0', so mlxsw ignores the switchdev # notification and the bridge driver adds the VLAN on 'vxlan0' via the # 8021q driver $ bridge vlan add vid 10 dev vxlan0 pvid untagged # mlxsw port is enslaved to the bridge $ ip link set dev swp1 master br0 # mlxsw processes the switchdev notification and the 8021q driver is # skipped $ bridge vlan del vid 10 dev vxlan0 This results in 'struct vlan_info' and 'struct vlan_vid_info' being leaked, as they were allocated by the 8021q driver during VLAN addition, but never freed as the 8021q driver was skipped during deletion. Fix this by introducing a new VLAN private flag that indicates whether the VLAN was added on the port by switchdev or the 8021q driver. If the VLAN was added by the 8021q driver, then we make sure to delete it via the 8021q driver as well. [1] unreferenced object 0xffff88822d20b1e8 (size 256): comm "bridge", pid 2532, jiffies 4295216998 (age 1188.830s) hex dump (first 32 bytes): e0 42 97 ce 81 88 ff ff 00 00 00 00 00 00 00 00 .B.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330 [<00000000e0178b02>] vlan_vid_add+0x661/0x920 [<00000000218ebd5f>] __vlan_add+0x1be9/0x3a00 [<000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90 [<000000003535392c>] br_vlan_info+0x132/0x410 [<00000000aedaa9dc>] br_afspec+0x75c/0x870 [<00000000f5716133>] br_setlink+0x3dc/0x6d0 [<00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30 [<00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80 [<0000000064097e69>] netlink_rcv_skb+0x152/0x3c0 [<000000008be8d614>] rtnetlink_rcv+0x21/0x30 [<000000009ab2ca25>] netlink_unicast+0x52f/0x740 [<00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50 [<000000005d1e2050>] sock_sendmsg+0xbe/0x120 [<00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0 [<00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270 unreferenced object 0xffff888227454308 (size 32): comm "bridge", pid 2532, jiffies 4295216998 (age 1188.882s) hex dump (first 32 bytes): 88 b2 20 2d 82 88 ff ff 88 b2 20 2d 82 88 ff ff .. -...... -.... 81 00 0a 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330 [<0000000018050631>] vlan_vid_add+0x3e6/0x920 [<00000000218ebd5f>] __vlan_add+0x1be9/0x3a00 [<000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90 [<000000003535392c>] br_vlan_info+0x132/0x410 [<00000000aedaa9dc>] br_afspec+0x75c/0x870 [<00000000f5716133>] br_setlink+0x3dc/0x6d0 [<00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30 [<00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80 [<0000000064097e69>] netlink_rcv_skb+0x152/0x3c0 [<000000008be8d614>] rtnetlink_rcv+0x21/0x30 [<000000009ab2ca25>] netlink_unicast+0x52f/0x740 [<00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50 [<000000005d1e2050>] sock_sendmsg+0xbe/0x120 [<00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0 [<00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270 Fixes: d70e42b22dd4 ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: bridge@lists.linux-foundation.org Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-09 00:48:11 +08:00
__vlan_vid_del(dev, br, v);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
if (masterv) {
if (v->stats && masterv->stats != v->stats)
free_percpu(v->stats);
v->stats = NULL;
br_vlan_put_master(masterv);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
v->brvlan = NULL;
}
} else {
br_switchdev_port_vlan_del(dev, v->vid);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
}
goto out;
}
static int __vlan_del(struct net_bridge_vlan *v)
{
struct net_bridge_vlan *masterv = v;
struct net_bridge_vlan_group *vg;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
struct net_bridge_port *p = NULL;
int err = 0;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
if (br_vlan_is_master(v)) {
vg = br_vlan_group(v->br);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
} else {
p = v->port;
vg = nbp_vlan_group(v->port);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
masterv = v->brvlan;
}
__vlan_delete_pvid(vg, v->vid);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
if (p) {
net: bridge: Fix VLANs memory leak When adding / deleting VLANs to / from a bridge port, the bridge driver first tries to propagate the information via switchdev and falls back to the 8021q driver in case the underlying driver does not support switchdev. This can result in a memory leak [1] when VXLAN and mlxsw ports are enslaved to the bridge: $ ip link set dev vxlan0 master br0 # No mlxsw ports are enslaved to 'br0', so mlxsw ignores the switchdev # notification and the bridge driver adds the VLAN on 'vxlan0' via the # 8021q driver $ bridge vlan add vid 10 dev vxlan0 pvid untagged # mlxsw port is enslaved to the bridge $ ip link set dev swp1 master br0 # mlxsw processes the switchdev notification and the 8021q driver is # skipped $ bridge vlan del vid 10 dev vxlan0 This results in 'struct vlan_info' and 'struct vlan_vid_info' being leaked, as they were allocated by the 8021q driver during VLAN addition, but never freed as the 8021q driver was skipped during deletion. Fix this by introducing a new VLAN private flag that indicates whether the VLAN was added on the port by switchdev or the 8021q driver. If the VLAN was added by the 8021q driver, then we make sure to delete it via the 8021q driver as well. [1] unreferenced object 0xffff88822d20b1e8 (size 256): comm "bridge", pid 2532, jiffies 4295216998 (age 1188.830s) hex dump (first 32 bytes): e0 42 97 ce 81 88 ff ff 00 00 00 00 00 00 00 00 .B.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330 [<00000000e0178b02>] vlan_vid_add+0x661/0x920 [<00000000218ebd5f>] __vlan_add+0x1be9/0x3a00 [<000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90 [<000000003535392c>] br_vlan_info+0x132/0x410 [<00000000aedaa9dc>] br_afspec+0x75c/0x870 [<00000000f5716133>] br_setlink+0x3dc/0x6d0 [<00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30 [<00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80 [<0000000064097e69>] netlink_rcv_skb+0x152/0x3c0 [<000000008be8d614>] rtnetlink_rcv+0x21/0x30 [<000000009ab2ca25>] netlink_unicast+0x52f/0x740 [<00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50 [<000000005d1e2050>] sock_sendmsg+0xbe/0x120 [<00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0 [<00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270 unreferenced object 0xffff888227454308 (size 32): comm "bridge", pid 2532, jiffies 4295216998 (age 1188.882s) hex dump (first 32 bytes): 88 b2 20 2d 82 88 ff ff 88 b2 20 2d 82 88 ff ff .. -...... -.... 81 00 0a 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330 [<0000000018050631>] vlan_vid_add+0x3e6/0x920 [<00000000218ebd5f>] __vlan_add+0x1be9/0x3a00 [<000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90 [<000000003535392c>] br_vlan_info+0x132/0x410 [<00000000aedaa9dc>] br_afspec+0x75c/0x870 [<00000000f5716133>] br_setlink+0x3dc/0x6d0 [<00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30 [<00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80 [<0000000064097e69>] netlink_rcv_skb+0x152/0x3c0 [<000000008be8d614>] rtnetlink_rcv+0x21/0x30 [<000000009ab2ca25>] netlink_unicast+0x52f/0x740 [<00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50 [<000000005d1e2050>] sock_sendmsg+0xbe/0x120 [<00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0 [<00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270 Fixes: d70e42b22dd4 ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: bridge@lists.linux-foundation.org Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-09 00:48:11 +08:00
err = __vlan_vid_del(p->dev, p->br, v);
if (err)
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
goto out;
} else {
err = br_switchdev_port_vlan_del(v->br->dev, v->vid);
if (err && err != -EOPNOTSUPP)
goto out;
err = 0;
}
if (br_vlan_should_use(v)) {
v->flags &= ~BRIDGE_VLAN_INFO_BRENTRY;
vg->num_vlans--;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
}
if (masterv != v) {
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 14:59:54 +08:00
vlan_tunnel_info_del(vg, v);
rhashtable_remove_fast(&vg->vlan_hash, &v->vnode,
br_vlan_rht_params);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
__vlan_del_list(v);
nbp_vlan_set_vlan_dev_state(p, v->vid);
call_rcu(&v->rcu, nbp_vlan_rcu_free);
}
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
br_vlan_put_master(masterv);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
out:
return err;
}
static void __vlan_group_free(struct net_bridge_vlan_group *vg)
{
WARN_ON(!list_empty(&vg->vlan_list));
rhashtable_destroy(&vg->vlan_hash);
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 14:59:54 +08:00
vlan_tunnel_deinit(vg);
kfree(vg);
}
static void __vlan_flush(const struct net_bridge *br,
const struct net_bridge_port *p,
struct net_bridge_vlan_group *vg)
{
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
struct net_bridge_vlan *vlan, *tmp;
u16 v_start = 0, v_end = 0;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
__vlan_delete_pvid(vg, vg->pvid);
list_for_each_entry_safe(vlan, tmp, &vg->vlan_list, vlist) {
/* take care of disjoint ranges */
if (!v_start) {
v_start = vlan->vid;
} else if (vlan->vid - v_end != 1) {
/* found range end, notify and start next one */
br_vlan_notify(br, p, v_start, v_end, RTM_DELVLAN);
v_start = vlan->vid;
}
v_end = vlan->vid;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
__vlan_del(vlan);
}
/* notify about the last/whole vlan range */
if (v_start)
br_vlan_notify(br, p, v_start, v_end, RTM_DELVLAN);
}
struct sk_buff *br_handle_vlan(struct net_bridge *br,
const struct net_bridge_port *p,
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
struct net_bridge_vlan_group *vg,
struct sk_buff *skb)
{
struct pcpu_sw_netstats *stats;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
struct net_bridge_vlan *v;
u16 vid;
/* If this packet was not filtered at input, let it pass */
if (!BR_INPUT_SKB_CB(skb)->vlan_filtered)
goto out;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
/* At this point, we know that the frame was filtered and contains
* a valid vlan id. If the vlan id has untagged flag set,
* send untagged; otherwise, send tagged.
*/
br_vlan_get_tag(skb, &vid);
v = br_vlan_find(vg, vid);
/* Vlan entry must be configured at this point. The
* only exception is the bridge is set in promisc mode and the
* packet is destined for the bridge device. In this case
* pass the packet as is.
*/
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
if (!v || !br_vlan_should_use(v)) {
if ((br->dev->flags & IFF_PROMISC) && skb->dev == br->dev) {
goto out;
} else {
kfree_skb(skb);
return NULL;
}
}
if (br_opt_get(br, BROPT_VLAN_STATS_ENABLED)) {
stats = this_cpu_ptr(v->stats);
u64_stats_update_begin(&stats->syncp);
stats->tx_bytes += skb->len;
stats->tx_packets++;
u64_stats_update_end(&stats->syncp);
}
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
if (v->flags & BRIDGE_VLAN_INFO_UNTAGGED)
__vlan_hwaccel_clear_tag(skb);
if (p && (p->flags & BR_VLAN_TUNNEL) &&
br_handle_egress_vlan_tunnel(skb, v)) {
kfree_skb(skb);
return NULL;
}
out:
return skb;
}
/* Called under RCU */
static bool __allowed_ingress(const struct net_bridge *br,
struct net_bridge_vlan_group *vg,
struct sk_buff *skb, u16 *vid,
u8 *state)
{
struct pcpu_sw_netstats *stats;
struct net_bridge_vlan *v;
bool tagged;
BR_INPUT_SKB_CB(skb)->vlan_filtered = true;
/* If vlan tx offload is disabled on bridge device and frame was
* sent from vlan device on the bridge device, it does not have
* HW accelerated vlan tag.
*/
if (unlikely(!skb_vlan_tag_present(skb) &&
skb->protocol == br->vlan_proto)) {
net: Always untag vlan-tagged traffic on input. Currently the functionality to untag traffic on input resides as part of the vlan module and is build only when VLAN support is enabled in the kernel. When VLAN is disabled, the function vlan_untag() turns into a stub and doesn't really untag the packets. This seems to create an interesting interaction between VMs supporting checksum offloading and some network drivers. There are some drivers that do not allow the user to change tx-vlan-offload feature of the driver. These drivers also seem to assume that any VLAN-tagged traffic they transmit will have the vlan information in the vlan_tci and not in the vlan header already in the skb. When transmitting skbs that already have tagged data with partial checksum set, the checksum doesn't appear to be updated correctly by the card thus resulting in a failure to establish TCP connections. The following is a packet trace taken on the receiver where a sender is a VM with a VLAN configued. The host VM is running on doest not have VLAN support and the outging interface on the host is tg3: 10:12:43.503055 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q (0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27243, offset 0, flags [DF], proto TCP (6), length 60) 10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect -> 0x48d9), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val 4294837885 ecr 0,nop,wscale 7], length 0 10:12:44.505556 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q (0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27244, offset 0, flags [DF], proto TCP (6), length 60) 10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect -> 0x44ee), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val 4294838888 ecr 0,nop,wscale 7], length 0 This connection finally times out. I've only access to the TG3 hardware in this configuration thus have only tested this with TG3 driver. There are a lot of other drivers that do not permit user changes to vlan acceleration features, and I don't know if they all suffere from a similar issue. The patch attempt to fix this another way. It moves the vlan header stipping code out of the vlan module and always builds it into the kernel network core. This way, even if vlan is not supported on a virtualizatoin host, the virtual machines running on top of such host will still work with VLANs enabled. CC: Patrick McHardy <kaber@trash.net> CC: Nithin Nayak Sujir <nsujir@broadcom.com> CC: Michael Chan <mchan@broadcom.com> CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-09 02:42:13 +08:00
skb = skb_vlan_untag(skb);
if (unlikely(!skb))
return false;
}
if (!br_vlan_get_tag(skb, vid)) {
/* Tagged frame */
if (skb->vlan_proto != br->vlan_proto) {
/* Protocol-mismatch, empty out vlan_tci for new tag */
skb_push(skb, ETH_HLEN);
skb = vlan_insert_tag_set_proto(skb, skb->vlan_proto,
skb_vlan_tag_get(skb));
if (unlikely(!skb))
return false;
skb_pull(skb, ETH_HLEN);
skb_reset_mac_len(skb);
*vid = 0;
tagged = false;
} else {
tagged = true;
}
} else {
/* Untagged frame */
tagged = false;
}
if (!*vid) {
u16 pvid = br_get_pvid(vg);
/* Frame had a tag with VID 0 or did not have a tag.
* See if pvid is set on this port. That tells us which
* vlan untagged or priority-tagged traffic belongs to.
*/
if (!pvid)
goto drop;
/* PVID is set on this port. Any untagged or priority-tagged
* ingress frame is considered to belong to this vlan.
*/
*vid = pvid;
if (likely(!tagged))
/* Untagged Frame. */
__vlan_hwaccel_put_tag(skb, br->vlan_proto, pvid);
else
/* Priority-tagged Frame.
* At this point, we know that skb->vlan_tci VID
* field was 0.
* We update only VID field and preserve PCP field.
*/
skb->vlan_tci |= pvid;
/* if stats are disabled we can avoid the lookup */
if (!br_opt_get(br, BROPT_VLAN_STATS_ENABLED)) {
if (*state == BR_STATE_FORWARDING) {
*state = br_vlan_get_pvid_state(vg);
return br_vlan_state_allowed(*state, true);
} else {
return true;
}
}
}
v = br_vlan_find(vg, *vid);
if (!v || !br_vlan_should_use(v))
goto drop;
if (*state == BR_STATE_FORWARDING) {
*state = br_vlan_get_state(v);
if (!br_vlan_state_allowed(*state, true))
goto drop;
}
if (br_opt_get(br, BROPT_VLAN_STATS_ENABLED)) {
stats = this_cpu_ptr(v->stats);
u64_stats_update_begin(&stats->syncp);
stats->rx_bytes += skb->len;
stats->rx_packets++;
u64_stats_update_end(&stats->syncp);
}
return true;
drop:
kfree_skb(skb);
return false;
}
bool br_allowed_ingress(const struct net_bridge *br,
struct net_bridge_vlan_group *vg, struct sk_buff *skb,
u16 *vid, u8 *state)
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
{
/* If VLAN filtering is disabled on the bridge, all packets are
* permitted.
*/
if (!br_opt_get(br, BROPT_VLAN_ENABLED)) {
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
BR_INPUT_SKB_CB(skb)->vlan_filtered = false;
return true;
}
return __allowed_ingress(br, vg, skb, vid, state);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
}
/* Called under RCU. */
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
bool br_allowed_egress(struct net_bridge_vlan_group *vg,
const struct sk_buff *skb)
{
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
const struct net_bridge_vlan *v;
u16 vid;
/* If this packet was not filtered at input, let it pass */
if (!BR_INPUT_SKB_CB(skb)->vlan_filtered)
return true;
br_vlan_get_tag(skb, &vid);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
v = br_vlan_find(vg, vid);
if (v && br_vlan_should_use(v) &&
br_vlan_state_allowed(br_vlan_get_state(v), false))
return true;
return false;
}
/* Called under RCU */
bool br_should_learn(struct net_bridge_port *p, struct sk_buff *skb, u16 *vid)
{
struct net_bridge_vlan_group *vg;
struct net_bridge *br = p->br;
struct net_bridge_vlan *v;
/* If filtering was disabled at input, let it pass. */
if (!br_opt_get(br, BROPT_VLAN_ENABLED))
return true;
vg = nbp_vlan_group_rcu(p);
if (!vg || !vg->num_vlans)
return false;
if (!br_vlan_get_tag(skb, vid) && skb->vlan_proto != br->vlan_proto)
*vid = 0;
if (!*vid) {
*vid = br_get_pvid(vg);
if (!*vid ||
!br_vlan_state_allowed(br_vlan_get_pvid_state(vg), true))
return false;
return true;
}
v = br_vlan_find(vg, *vid);
if (v && br_vlan_state_allowed(br_vlan_get_state(v), true))
return true;
return false;
}
static int br_vlan_add_existing(struct net_bridge *br,
struct net_bridge_vlan_group *vg,
struct net_bridge_vlan *vlan,
u16 flags, bool *changed,
struct netlink_ext_ack *extack)
{
int err;
err = br_switchdev_port_vlan_add(br->dev, vlan->vid, flags, extack);
if (err && err != -EOPNOTSUPP)
return err;
if (!br_vlan_is_brentry(vlan)) {
/* Trying to change flags of non-existent bridge vlan */
if (!(flags & BRIDGE_VLAN_INFO_BRENTRY)) {
err = -EINVAL;
goto err_flags;
}
/* It was only kept for port vlans, now make it real */
err = br_fdb_insert(br, NULL, br->dev->dev_addr,
vlan->vid);
if (err) {
br_err(br, "failed to insert local address into bridge forwarding table\n");
goto err_fdb_insert;
}
refcount_inc(&vlan->refcnt);
vlan->flags |= BRIDGE_VLAN_INFO_BRENTRY;
vg->num_vlans++;
*changed = true;
}
if (__vlan_add_flags(vlan, flags))
*changed = true;
return 0;
err_fdb_insert:
err_flags:
br_switchdev_port_vlan_del(br->dev, vlan->vid);
return err;
}
/* Must be protected by RTNL.
* Must be called with vid in range from 1 to 4094 inclusive.
* changed must be true only if the vlan was created or updated
*/
int br_vlan_add(struct net_bridge *br, u16 vid, u16 flags, bool *changed,
struct netlink_ext_ack *extack)
{
struct net_bridge_vlan_group *vg;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
struct net_bridge_vlan *vlan;
int ret;
ASSERT_RTNL();
*changed = false;
vg = br_vlan_group(br);
vlan = br_vlan_find(vg, vid);
if (vlan)
return br_vlan_add_existing(br, vg, vlan, flags, changed,
extack);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
vlan = kzalloc(sizeof(*vlan), GFP_KERNEL);
if (!vlan)
return -ENOMEM;
vlan->stats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
if (!vlan->stats) {
kfree(vlan);
return -ENOMEM;
}
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
vlan->vid = vid;
vlan->flags = flags | BRIDGE_VLAN_INFO_MASTER;
vlan->flags &= ~BRIDGE_VLAN_INFO_PVID;
vlan->br = br;
if (flags & BRIDGE_VLAN_INFO_BRENTRY)
refcount_set(&vlan->refcnt, 1);
ret = __vlan_add(vlan, flags, extack);
if (ret) {
free_percpu(vlan->stats);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
kfree(vlan);
} else {
*changed = true;
}
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
return ret;
}
/* Must be protected by RTNL.
* Must be called with vid in range from 1 to 4094 inclusive.
*/
int br_vlan_delete(struct net_bridge *br, u16 vid)
{
struct net_bridge_vlan_group *vg;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
struct net_bridge_vlan *v;
ASSERT_RTNL();
vg = br_vlan_group(br);
v = br_vlan_find(vg, vid);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
if (!v || !br_vlan_is_brentry(v))
return -ENOENT;
br_fdb_find_delete_local(br, NULL, br->dev->dev_addr, vid);
br_fdb_delete_by_port(br, NULL, vid, 0);
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 14:59:54 +08:00
vlan_tunnel_info_del(vg, v);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
return __vlan_del(v);
}
void br_vlan_flush(struct net_bridge *br)
{
struct net_bridge_vlan_group *vg;
ASSERT_RTNL();
vg = br_vlan_group(br);
__vlan_flush(br, NULL, vg);
RCU_INIT_POINTER(br->vlgrp, NULL);
synchronize_rcu();
__vlan_group_free(vg);
}
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
struct net_bridge_vlan *br_vlan_find(struct net_bridge_vlan_group *vg, u16 vid)
bridge: Fix the way to check if a local fdb entry can be deleted We should take into account the followings when deleting a local fdb entry. - nbp_vlan_find() can be used only when vid != 0 to check if an entry is deletable, because a fdb entry with vid 0 can exist at any time while nbp_vlan_find() always return false with vid 0. Example of problematic case: ip link set eth0 address 12:34:56:78:90:ab ip link set eth1 address 12:34:56:78:90:ab brctl addif br0 eth0 brctl addif br0 eth1 ip link set eth0 address aa:bb:cc:dd:ee:ff Then, the fdb entry 12:34:56:78:90:ab will be deleted even though the bridge port eth1 still has that address. - The port to which the bridge device is attached might needs a local entry if its mac address is set manually. Example of problematic case: ip link set eth0 address 12:34:56:78:90:ab brctl addif br0 eth0 ip link set br0 address 12:34:56:78:90:ab ip link set eth0 address aa:bb:cc:dd:ee:ff Then, the fdb still must have the entry 12:34:56:78:90:ab, but it will be deleted. We can use br->dev->addr_assign_type to check if the address is manually set or not, but I propose another approach. Since we delete and insert local entries whenever changing mac address of the bridge device, we can change dst of the entry to NULL regardless of addr_assign_type when deleting an entry associated with a certain port, and if it is found to be unnecessary later, then delete it. That is, if changing mac address of a port, the entry might be changed to its dst being NULL first, but is eventually deleted when recalculating and changing bridge id. This approach is especially useful when we want to share the code with deleting vlan in which the bridge device might want such an entry regardless of addr_assign_type, and makes things easy because we don't have to consider if mac address of the bridge device will be changed or not at the time we delete a local entry of a port, which means fdb code will not be bothered even if the bridge id calculating logic is changed in the future. Also, this change reduces inconsistent state, where frames whose dst is the mac address of the bridge, can't reach the bridge because of premature fdb entry deletion. This change reduces the possibility that the bridge device replies unreachable mac address to arp requests, which could occur during the short window between calling del_nbp() and br_stp_recalculate_bridge_id() in br_del_if(). This will effective after br_fdb_delete_by_port() starts to use the same code by following patch. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-07 15:48:22 +08:00
{
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
if (!vg)
return NULL;
bridge: Fix the way to check if a local fdb entry can be deleted We should take into account the followings when deleting a local fdb entry. - nbp_vlan_find() can be used only when vid != 0 to check if an entry is deletable, because a fdb entry with vid 0 can exist at any time while nbp_vlan_find() always return false with vid 0. Example of problematic case: ip link set eth0 address 12:34:56:78:90:ab ip link set eth1 address 12:34:56:78:90:ab brctl addif br0 eth0 brctl addif br0 eth1 ip link set eth0 address aa:bb:cc:dd:ee:ff Then, the fdb entry 12:34:56:78:90:ab will be deleted even though the bridge port eth1 still has that address. - The port to which the bridge device is attached might needs a local entry if its mac address is set manually. Example of problematic case: ip link set eth0 address 12:34:56:78:90:ab brctl addif br0 eth0 ip link set br0 address 12:34:56:78:90:ab ip link set eth0 address aa:bb:cc:dd:ee:ff Then, the fdb still must have the entry 12:34:56:78:90:ab, but it will be deleted. We can use br->dev->addr_assign_type to check if the address is manually set or not, but I propose another approach. Since we delete and insert local entries whenever changing mac address of the bridge device, we can change dst of the entry to NULL regardless of addr_assign_type when deleting an entry associated with a certain port, and if it is found to be unnecessary later, then delete it. That is, if changing mac address of a port, the entry might be changed to its dst being NULL first, but is eventually deleted when recalculating and changing bridge id. This approach is especially useful when we want to share the code with deleting vlan in which the bridge device might want such an entry regardless of addr_assign_type, and makes things easy because we don't have to consider if mac address of the bridge device will be changed or not at the time we delete a local entry of a port, which means fdb code will not be bothered even if the bridge id calculating logic is changed in the future. Also, this change reduces inconsistent state, where frames whose dst is the mac address of the bridge, can't reach the bridge because of premature fdb entry deletion. This change reduces the possibility that the bridge device replies unreachable mac address to arp requests, which could occur during the short window between calling del_nbp() and br_stp_recalculate_bridge_id() in br_del_if(). This will effective after br_fdb_delete_by_port() starts to use the same code by following patch. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-07 15:48:22 +08:00
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
return br_vlan_lookup(&vg->vlan_hash, vid);
bridge: Fix the way to check if a local fdb entry can be deleted We should take into account the followings when deleting a local fdb entry. - nbp_vlan_find() can be used only when vid != 0 to check if an entry is deletable, because a fdb entry with vid 0 can exist at any time while nbp_vlan_find() always return false with vid 0. Example of problematic case: ip link set eth0 address 12:34:56:78:90:ab ip link set eth1 address 12:34:56:78:90:ab brctl addif br0 eth0 brctl addif br0 eth1 ip link set eth0 address aa:bb:cc:dd:ee:ff Then, the fdb entry 12:34:56:78:90:ab will be deleted even though the bridge port eth1 still has that address. - The port to which the bridge device is attached might needs a local entry if its mac address is set manually. Example of problematic case: ip link set eth0 address 12:34:56:78:90:ab brctl addif br0 eth0 ip link set br0 address 12:34:56:78:90:ab ip link set eth0 address aa:bb:cc:dd:ee:ff Then, the fdb still must have the entry 12:34:56:78:90:ab, but it will be deleted. We can use br->dev->addr_assign_type to check if the address is manually set or not, but I propose another approach. Since we delete and insert local entries whenever changing mac address of the bridge device, we can change dst of the entry to NULL regardless of addr_assign_type when deleting an entry associated with a certain port, and if it is found to be unnecessary later, then delete it. That is, if changing mac address of a port, the entry might be changed to its dst being NULL first, but is eventually deleted when recalculating and changing bridge id. This approach is especially useful when we want to share the code with deleting vlan in which the bridge device might want such an entry regardless of addr_assign_type, and makes things easy because we don't have to consider if mac address of the bridge device will be changed or not at the time we delete a local entry of a port, which means fdb code will not be bothered even if the bridge id calculating logic is changed in the future. Also, this change reduces inconsistent state, where frames whose dst is the mac address of the bridge, can't reach the bridge because of premature fdb entry deletion. This change reduces the possibility that the bridge device replies unreachable mac address to arp requests, which could occur during the short window between calling del_nbp() and br_stp_recalculate_bridge_id() in br_del_if(). This will effective after br_fdb_delete_by_port() starts to use the same code by following patch. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-07 15:48:22 +08:00
}
/* Must be protected by RTNL. */
static void recalculate_group_addr(struct net_bridge *br)
{
if (br_opt_get(br, BROPT_GROUP_ADDR_SET))
return;
spin_lock_bh(&br->lock);
if (!br_opt_get(br, BROPT_VLAN_ENABLED) ||
br->vlan_proto == htons(ETH_P_8021Q)) {
/* Bridge Group Address */
br->group_addr[5] = 0x00;
} else { /* vlan_enabled && ETH_P_8021AD */
/* Provider Bridge Group Address */
br->group_addr[5] = 0x08;
}
spin_unlock_bh(&br->lock);
}
/* Must be protected by RTNL. */
void br_recalculate_fwd_mask(struct net_bridge *br)
{
if (!br_opt_get(br, BROPT_VLAN_ENABLED) ||
br->vlan_proto == htons(ETH_P_8021Q))
br->group_fwd_mask_required = BR_GROUPFWD_DEFAULT;
else /* vlan_enabled && ETH_P_8021AD */
br->group_fwd_mask_required = BR_GROUPFWD_8021AD &
~(1u << br->group_addr[5]);
}
int __br_vlan_filter_toggle(struct net_bridge *br, unsigned long val)
{
struct switchdev_attr attr = {
.orig_dev = br->dev,
.id = SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING,
.flags = SWITCHDEV_F_SKIP_EOPNOTSUPP,
.u.vlan_filtering = val,
};
int err;
if (br_opt_get(br, BROPT_VLAN_ENABLED) == !!val)
return 0;
err = switchdev_port_attr_set(br->dev, &attr);
if (err && err != -EOPNOTSUPP)
return err;
br_opt_toggle(br, BROPT_VLAN_ENABLED, !!val);
bridge: Automatically manage port promiscuous mode. There exist configurations where the administrator or another management entity has the foreknowledge of all the mac addresses of end systems that are being bridged together. In these environments, the administrator can statically configure known addresses in the bridge FDB and disable flooding and learning on ports. This makes it possible to turn off promiscuous mode on the interfaces connected to the bridge. Here is why disabling flooding and learning allows us to control promiscuity: Consider port X. All traffic coming into this port from outside the bridge (ingress) will be either forwarded through other ports of the bridge (egress) or dropped. Forwarding (egress) is defined by FDB entries and by flooding in the event that no FDB entry exists. In the event that flooding is disabled, only FDB entries define the egress. Once learning is disabled, only static FDB entries provided by a management entity define the egress. If we provide information from these static FDBs to the ingress port X, then we'll be able to accept all traffic that can be successfully forwarded and drop all the other traffic sooner without spending CPU cycles to process it. Another way to define the above is as following equations: ingress = egress + drop expanding egress ingress = static FDB + learned FDB + flooding + drop disabling flooding and learning we a left with ingress = static FDB + drop By adding addresses from the static FDB entries to the MAC address filter of an ingress port X, we fully define what the bridge can process without dropping and can thus turn off promiscuous mode, thus dropping packets sooner. There have been suggestions that we may want to allow learning and update the filters with learned addresses as well. This would require mac-level authentication similar to 802.1x to prevent attacks against the hw filters as they are limited resource. Additionally, if the user places the bridge device in promiscuous mode, all ports are placed in promiscuous mode regardless of the changes to flooding and learning. Since the above functionality depends on full static configuration, we have also require that vlan filtering be enabled to take advantage of this. The reason is that the bridge has to be able to receive and process VLAN-tagged frames and the there are only 2 ways to accomplish this right now: promiscuous mode or vlan filtering. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 21:59:20 +08:00
br_manage_promisc(br);
recalculate_group_addr(br);
br_recalculate_fwd_mask(br);
return 0;
}
int br_vlan_filter_toggle(struct net_bridge *br, unsigned long val)
{
return __br_vlan_filter_toggle(br, val);
}
bool br_vlan_enabled(const struct net_device *dev)
{
struct net_bridge *br = netdev_priv(dev);
return br_opt_get(br, BROPT_VLAN_ENABLED);
}
EXPORT_SYMBOL_GPL(br_vlan_enabled);
int br_vlan_get_proto(const struct net_device *dev, u16 *p_proto)
{
struct net_bridge *br = netdev_priv(dev);
*p_proto = ntohs(br->vlan_proto);
return 0;
}
EXPORT_SYMBOL_GPL(br_vlan_get_proto);
int __br_vlan_set_proto(struct net_bridge *br, __be16 proto)
{
struct switchdev_attr attr = {
.orig_dev = br->dev,
.id = SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL,
.flags = SWITCHDEV_F_SKIP_EOPNOTSUPP,
.u.vlan_protocol = ntohs(proto),
};
int err = 0;
struct net_bridge_port *p;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
struct net_bridge_vlan *vlan;
struct net_bridge_vlan_group *vg;
__be16 oldproto = br->vlan_proto;
if (br->vlan_proto == proto)
return 0;
err = switchdev_port_attr_set(br->dev, &attr);
if (err && err != -EOPNOTSUPP)
return err;
/* Add VLANs for the new proto to the device filter. */
list_for_each_entry(p, &br->port_list, list) {
vg = nbp_vlan_group(p);
list_for_each_entry(vlan, &vg->vlan_list, vlist) {
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
err = vlan_vid_add(p->dev, proto, vlan->vid);
if (err)
goto err_filt;
}
}
br->vlan_proto = proto;
recalculate_group_addr(br);
br_recalculate_fwd_mask(br);
/* Delete VLANs for the old proto from the device filter. */
list_for_each_entry(p, &br->port_list, list) {
vg = nbp_vlan_group(p);
list_for_each_entry(vlan, &vg->vlan_list, vlist)
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
vlan_vid_del(p->dev, oldproto, vlan->vid);
}
return 0;
err_filt:
attr.u.vlan_protocol = ntohs(oldproto);
switchdev_port_attr_set(br->dev, &attr);
list_for_each_entry_continue_reverse(vlan, &vg->vlan_list, vlist)
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
vlan_vid_del(p->dev, proto, vlan->vid);
list_for_each_entry_continue_reverse(p, &br->port_list, list) {
vg = nbp_vlan_group(p);
list_for_each_entry(vlan, &vg->vlan_list, vlist)
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
vlan_vid_del(p->dev, proto, vlan->vid);
}
return err;
}
int br_vlan_set_proto(struct net_bridge *br, unsigned long val)
{
if (!eth_type_vlan(htons(val)))
return -EPROTONOSUPPORT;
return __br_vlan_set_proto(br, htons(val));
}
int br_vlan_set_stats(struct net_bridge *br, unsigned long val)
{
switch (val) {
case 0:
case 1:
br_opt_toggle(br, BROPT_VLAN_STATS_ENABLED, !!val);
break;
default:
return -EINVAL;
}
return 0;
}
int br_vlan_set_stats_per_port(struct net_bridge *br, unsigned long val)
{
struct net_bridge_port *p;
/* allow to change the option if there are no port vlans configured */
list_for_each_entry(p, &br->port_list, list) {
struct net_bridge_vlan_group *vg = nbp_vlan_group(p);
if (vg->num_vlans)
return -EBUSY;
}
switch (val) {
case 0:
case 1:
br_opt_toggle(br, BROPT_VLAN_STATS_PER_PORT, !!val);
break;
default:
return -EINVAL;
}
return 0;
}
static bool vlan_default_pvid(struct net_bridge_vlan_group *vg, u16 vid)
{
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
struct net_bridge_vlan *v;
if (vid != vg->pvid)
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
return false;
v = br_vlan_lookup(&vg->vlan_hash, vid);
if (v && br_vlan_should_use(v) &&
(v->flags & BRIDGE_VLAN_INFO_UNTAGGED))
return true;
return false;
}
static void br_vlan_disable_default_pvid(struct net_bridge *br)
{
struct net_bridge_port *p;
u16 pvid = br->default_pvid;
/* Disable default_pvid on all ports where it is still
* configured.
*/
if (vlan_default_pvid(br_vlan_group(br), pvid)) {
if (!br_vlan_delete(br, pvid))
br_vlan_notify(br, NULL, pvid, 0, RTM_DELVLAN);
}
list_for_each_entry(p, &br->port_list, list) {
if (vlan_default_pvid(nbp_vlan_group(p), pvid) &&
!nbp_vlan_delete(p, pvid))
br_vlan_notify(br, p, pvid, 0, RTM_DELVLAN);
}
br->default_pvid = 0;
}
int __br_vlan_set_default_pvid(struct net_bridge *br, u16 pvid,
struct netlink_ext_ack *extack)
{
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
const struct net_bridge_vlan *pvent;
struct net_bridge_vlan_group *vg;
struct net_bridge_port *p;
unsigned long *changed;
bool vlchange;
u16 old_pvid;
int err = 0;
if (!pvid) {
br_vlan_disable_default_pvid(br);
return 0;
}
changed = bitmap_zalloc(BR_MAX_PORTS, GFP_KERNEL);
if (!changed)
return -ENOMEM;
old_pvid = br->default_pvid;
/* Update default_pvid config only if we do not conflict with
* user configuration.
*/
vg = br_vlan_group(br);
pvent = br_vlan_find(vg, pvid);
if ((!old_pvid || vlan_default_pvid(vg, old_pvid)) &&
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
(!pvent || !br_vlan_should_use(pvent))) {
err = br_vlan_add(br, pvid,
BRIDGE_VLAN_INFO_PVID |
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
BRIDGE_VLAN_INFO_UNTAGGED |
BRIDGE_VLAN_INFO_BRENTRY,
&vlchange, extack);
if (err)
goto out;
if (br_vlan_delete(br, old_pvid))
br_vlan_notify(br, NULL, old_pvid, 0, RTM_DELVLAN);
br_vlan_notify(br, NULL, pvid, 0, RTM_NEWVLAN);
set_bit(0, changed);
}
list_for_each_entry(p, &br->port_list, list) {
/* Update default_pvid config only if we do not conflict with
* user configuration.
*/
vg = nbp_vlan_group(p);
if ((old_pvid &&
!vlan_default_pvid(vg, old_pvid)) ||
br_vlan_find(vg, pvid))
continue;
err = nbp_vlan_add(p, pvid,
BRIDGE_VLAN_INFO_PVID |
BRIDGE_VLAN_INFO_UNTAGGED,
&vlchange, extack);
if (err)
goto err_port;
if (nbp_vlan_delete(p, old_pvid))
br_vlan_notify(br, p, old_pvid, 0, RTM_DELVLAN);
br_vlan_notify(p->br, p, pvid, 0, RTM_NEWVLAN);
set_bit(p->port_no, changed);
}
br->default_pvid = pvid;
out:
bitmap_free(changed);
return err;
err_port:
list_for_each_entry_continue_reverse(p, &br->port_list, list) {
if (!test_bit(p->port_no, changed))
continue;
if (old_pvid) {
nbp_vlan_add(p, old_pvid,
BRIDGE_VLAN_INFO_PVID |
BRIDGE_VLAN_INFO_UNTAGGED,
&vlchange, NULL);
br_vlan_notify(p->br, p, old_pvid, 0, RTM_NEWVLAN);
}
nbp_vlan_delete(p, pvid);
br_vlan_notify(br, p, pvid, 0, RTM_DELVLAN);
}
if (test_bit(0, changed)) {
if (old_pvid) {
br_vlan_add(br, old_pvid,
BRIDGE_VLAN_INFO_PVID |
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
BRIDGE_VLAN_INFO_UNTAGGED |
BRIDGE_VLAN_INFO_BRENTRY,
&vlchange, NULL);
br_vlan_notify(br, NULL, old_pvid, 0, RTM_NEWVLAN);
}
br_vlan_delete(br, pvid);
br_vlan_notify(br, NULL, pvid, 0, RTM_DELVLAN);
}
goto out;
}
int br_vlan_set_default_pvid(struct net_bridge *br, unsigned long val)
{
u16 pvid = val;
int err = 0;
if (val >= VLAN_VID_MASK)
return -EINVAL;
if (pvid == br->default_pvid)
goto out;
/* Only allow default pvid change when filtering is disabled */
if (br_opt_get(br, BROPT_VLAN_ENABLED)) {
pr_info_once("Please disable vlan filtering to change default_pvid\n");
err = -EPERM;
goto out;
}
err = __br_vlan_set_default_pvid(br, pvid, NULL);
out:
return err;
}
int br_vlan_init(struct net_bridge *br)
{
struct net_bridge_vlan_group *vg;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
int ret = -ENOMEM;
vg = kzalloc(sizeof(*vg), GFP_KERNEL);
if (!vg)
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
goto out;
ret = rhashtable_init(&vg->vlan_hash, &br_vlan_rht_params);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
if (ret)
goto err_rhtbl;
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 14:59:54 +08:00
ret = vlan_tunnel_init(vg);
if (ret)
goto err_tunnel_init;
INIT_LIST_HEAD(&vg->vlan_list);
br->vlan_proto = htons(ETH_P_8021Q);
br->default_pvid = 1;
rcu_assign_pointer(br->vlgrp, vg);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
out:
return ret;
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 14:59:54 +08:00
err_tunnel_init:
rhashtable_destroy(&vg->vlan_hash);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
err_rhtbl:
kfree(vg);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
goto out;
}
int nbp_vlan_init(struct net_bridge_port *p, struct netlink_ext_ack *extack)
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
{
struct switchdev_attr attr = {
.orig_dev = p->br->dev,
.id = SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING,
.flags = SWITCHDEV_F_SKIP_EOPNOTSUPP,
.u.vlan_filtering = br_opt_get(p->br, BROPT_VLAN_ENABLED),
};
struct net_bridge_vlan_group *vg;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
int ret = -ENOMEM;
vg = kzalloc(sizeof(struct net_bridge_vlan_group), GFP_KERNEL);
if (!vg)
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
goto out;
ret = switchdev_port_attr_set(p->dev, &attr);
if (ret && ret != -EOPNOTSUPP)
goto err_vlan_enabled;
ret = rhashtable_init(&vg->vlan_hash, &br_vlan_rht_params);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
if (ret)
goto err_rhtbl;
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 14:59:54 +08:00
ret = vlan_tunnel_init(vg);
if (ret)
goto err_tunnel_init;
INIT_LIST_HEAD(&vg->vlan_list);
rcu_assign_pointer(p->vlgrp, vg);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
if (p->br->default_pvid) {
bool changed;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
ret = nbp_vlan_add(p, p->br->default_pvid,
BRIDGE_VLAN_INFO_PVID |
BRIDGE_VLAN_INFO_UNTAGGED,
&changed, extack);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
if (ret)
goto err_vlan_add;
br_vlan_notify(p->br, p, p->br->default_pvid, 0, RTM_NEWVLAN);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
}
out:
return ret;
err_vlan_add:
RCU_INIT_POINTER(p->vlgrp, NULL);
synchronize_rcu();
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 14:59:54 +08:00
vlan_tunnel_deinit(vg);
err_tunnel_init:
rhashtable_destroy(&vg->vlan_hash);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
err_rhtbl:
err_vlan_enabled:
kfree(vg);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
goto out;
}
/* Must be protected by RTNL.
* Must be called with vid in range from 1 to 4094 inclusive.
* changed must be true only if the vlan was created or updated
*/
int nbp_vlan_add(struct net_bridge_port *port, u16 vid, u16 flags,
bool *changed, struct netlink_ext_ack *extack)
{
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
struct net_bridge_vlan *vlan;
int ret;
ASSERT_RTNL();
*changed = false;
vlan = br_vlan_find(nbp_vlan_group(port), vid);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
if (vlan) {
/* Pass the flags to the hardware bridge */
ret = br_switchdev_port_vlan_add(port->dev, vid, flags, extack);
if (ret && ret != -EOPNOTSUPP)
return ret;
*changed = __vlan_add_flags(vlan, flags);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
return 0;
}
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
vlan = kzalloc(sizeof(*vlan), GFP_KERNEL);
if (!vlan)
return -ENOMEM;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
vlan->vid = vid;
vlan->port = port;
ret = __vlan_add(vlan, flags, extack);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
if (ret)
kfree(vlan);
else
*changed = true;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
return ret;
}
/* Must be protected by RTNL.
* Must be called with vid in range from 1 to 4094 inclusive.
*/
int nbp_vlan_delete(struct net_bridge_port *port, u16 vid)
{
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
struct net_bridge_vlan *v;
ASSERT_RTNL();
v = br_vlan_find(nbp_vlan_group(port), vid);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
if (!v)
return -ENOENT;
br_fdb_find_delete_local(port->br, port, port->dev->dev_addr, vid);
br_fdb_delete_by_port(port->br, port, vid, 0);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 01:00:11 +08:00
return __vlan_del(v);
}
void nbp_vlan_flush(struct net_bridge_port *port)
{
struct net_bridge_vlan_group *vg;
ASSERT_RTNL();
vg = nbp_vlan_group(port);
__vlan_flush(port->br, port, vg);
RCU_INIT_POINTER(port->vlgrp, NULL);
synchronize_rcu();
__vlan_group_free(vg);
}
void br_vlan_get_stats(const struct net_bridge_vlan *v,
struct pcpu_sw_netstats *stats)
{
int i;
memset(stats, 0, sizeof(*stats));
for_each_possible_cpu(i) {
u64 rxpackets, rxbytes, txpackets, txbytes;
struct pcpu_sw_netstats *cpu_stats;
unsigned int start;
cpu_stats = per_cpu_ptr(v->stats, i);
do {
start = u64_stats_fetch_begin_irq(&cpu_stats->syncp);
rxpackets = cpu_stats->rx_packets;
rxbytes = cpu_stats->rx_bytes;
txbytes = cpu_stats->tx_bytes;
txpackets = cpu_stats->tx_packets;
} while (u64_stats_fetch_retry_irq(&cpu_stats->syncp, start));
stats->rx_packets += rxpackets;
stats->rx_bytes += rxbytes;
stats->tx_bytes += txbytes;
stats->tx_packets += txpackets;
}
}
int br_vlan_get_pvid(const struct net_device *dev, u16 *p_pvid)
{
struct net_bridge_vlan_group *vg;
struct net_bridge_port *p;
ASSERT_RTNL();
p = br_port_get_check_rtnl(dev);
if (p)
vg = nbp_vlan_group(p);
else if (netif_is_bridge_master(dev))
vg = br_vlan_group(netdev_priv(dev));
else
return -EINVAL;
*p_pvid = br_get_pvid(vg);
return 0;
}
EXPORT_SYMBOL_GPL(br_vlan_get_pvid);
int br_vlan_get_pvid_rcu(const struct net_device *dev, u16 *p_pvid)
{
struct net_bridge_vlan_group *vg;
struct net_bridge_port *p;
p = br_port_get_check_rcu(dev);
if (p)
vg = nbp_vlan_group_rcu(p);
else if (netif_is_bridge_master(dev))
vg = br_vlan_group_rcu(netdev_priv(dev));
else
return -EINVAL;
*p_pvid = br_get_pvid(vg);
return 0;
}
EXPORT_SYMBOL_GPL(br_vlan_get_pvid_rcu);
int br_vlan_get_info(const struct net_device *dev, u16 vid,
struct bridge_vlan_info *p_vinfo)
{
struct net_bridge_vlan_group *vg;
struct net_bridge_vlan *v;
struct net_bridge_port *p;
ASSERT_RTNL();
p = br_port_get_check_rtnl(dev);
if (p)
vg = nbp_vlan_group(p);
else if (netif_is_bridge_master(dev))
vg = br_vlan_group(netdev_priv(dev));
else
return -EINVAL;
v = br_vlan_find(vg, vid);
if (!v)
return -ENOENT;
p_vinfo->vid = vid;
p_vinfo->flags = v->flags;
net: bridge: Populate the pvid flag in br_vlan_get_info Currently this simplified code snippet fails: br_vlan_get_pvid(netdev, &pvid); br_vlan_get_info(netdev, pvid, &vinfo); ASSERT(!(vinfo.flags & BRIDGE_VLAN_INFO_PVID)); It is intuitive that the pvid of a netdevice should have the BRIDGE_VLAN_INFO_PVID flag set. However I can't seem to pinpoint a commit where this behavior was introduced. It seems like it's been like that since forever. At a first glance it would make more sense to just handle the BRIDGE_VLAN_INFO_PVID flag in __vlan_add_flags. However, as Nikolay explains: There are a few reasons why we don't do it, most importantly because we need to have only one visible pvid at any single time, even if it's stale - it must be just one. Right now that rule will not be violated by this change, but people will try using this flag and could see two pvids simultaneously. You can see that the pvid code is even using memory barriers to propagate the new value faster and everywhere the pvid is read only once. That is the reason the flag is set dynamically when dumping entries, too. A second (weaker) argument against would be given the above we don't want another way to do the same thing, specifically if it can provide us with two pvids (e.g. if walking the vlan list) or if it can provide us with a pvid different from the one set in the vg. [Obviously, I'm talking about RCU pvid/vlan use cases similar to the dumps. The locked cases are fine. I would like to avoid explaining why this shouldn't be relied upon without locking] So instead of introducing the above change and making sure of the pvid uniqueness under RCU, simply dynamically populate the pvid flag in br_vlan_get_info(). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30 08:53:24 +08:00
if (vid == br_get_pvid(vg))
p_vinfo->flags |= BRIDGE_VLAN_INFO_PVID;
return 0;
}
EXPORT_SYMBOL_GPL(br_vlan_get_info);
static int br_vlan_is_bind_vlan_dev(const struct net_device *dev)
{
return is_vlan_dev(dev) &&
!!(vlan_dev_priv(dev)->flags & VLAN_FLAG_BRIDGE_BINDING);
}
static int br_vlan_is_bind_vlan_dev_fn(struct net_device *dev,
__always_unused struct netdev_nested_priv *priv)
{
return br_vlan_is_bind_vlan_dev(dev);
}
static bool br_vlan_has_upper_bind_vlan_dev(struct net_device *dev)
{
int found;
rcu_read_lock();
found = netdev_walk_all_upper_dev_rcu(dev, br_vlan_is_bind_vlan_dev_fn,
NULL);
rcu_read_unlock();
return !!found;
}
struct br_vlan_bind_walk_data {
u16 vid;
struct net_device *result;
};
static int br_vlan_match_bind_vlan_dev_fn(struct net_device *dev,
struct netdev_nested_priv *priv)
{
struct br_vlan_bind_walk_data *data = priv->data;
int found = 0;
if (br_vlan_is_bind_vlan_dev(dev) &&
vlan_dev_priv(dev)->vlan_id == data->vid) {
data->result = dev;
found = 1;
}
return found;
}
static struct net_device *
br_vlan_get_upper_bind_vlan_dev(struct net_device *dev, u16 vid)
{
struct br_vlan_bind_walk_data data = {
.vid = vid,
};
struct netdev_nested_priv priv = {
.data = (void *)&data,
};
rcu_read_lock();
netdev_walk_all_upper_dev_rcu(dev, br_vlan_match_bind_vlan_dev_fn,
&priv);
rcu_read_unlock();
return data.result;
}
static bool br_vlan_is_dev_up(const struct net_device *dev)
{
return !!(dev->flags & IFF_UP) && netif_oper_up(dev);
}
static void br_vlan_set_vlan_dev_state(const struct net_bridge *br,
struct net_device *vlan_dev)
{
u16 vid = vlan_dev_priv(vlan_dev)->vlan_id;
struct net_bridge_vlan_group *vg;
struct net_bridge_port *p;
bool has_carrier = false;
if (!netif_carrier_ok(br->dev)) {
netif_carrier_off(vlan_dev);
return;
}
list_for_each_entry(p, &br->port_list, list) {
vg = nbp_vlan_group(p);
if (br_vlan_find(vg, vid) && br_vlan_is_dev_up(p->dev)) {
has_carrier = true;
break;
}
}
if (has_carrier)
netif_carrier_on(vlan_dev);
else
netif_carrier_off(vlan_dev);
}
static void br_vlan_set_all_vlan_dev_state(struct net_bridge_port *p)
{
struct net_bridge_vlan_group *vg = nbp_vlan_group(p);
struct net_bridge_vlan *vlan;
struct net_device *vlan_dev;
list_for_each_entry(vlan, &vg->vlan_list, vlist) {
vlan_dev = br_vlan_get_upper_bind_vlan_dev(p->br->dev,
vlan->vid);
if (vlan_dev) {
if (br_vlan_is_dev_up(p->dev)) {
if (netif_carrier_ok(p->br->dev))
netif_carrier_on(vlan_dev);
} else {
br_vlan_set_vlan_dev_state(p->br, vlan_dev);
}
}
}
}
static void br_vlan_upper_change(struct net_device *dev,
struct net_device *upper_dev,
bool linking)
{
struct net_bridge *br = netdev_priv(dev);
if (!br_vlan_is_bind_vlan_dev(upper_dev))
return;
if (linking) {
br_vlan_set_vlan_dev_state(br, upper_dev);
br_opt_toggle(br, BROPT_VLAN_BRIDGE_BINDING, true);
} else {
br_opt_toggle(br, BROPT_VLAN_BRIDGE_BINDING,
br_vlan_has_upper_bind_vlan_dev(dev));
}
}
struct br_vlan_link_state_walk_data {
struct net_bridge *br;
};
static int br_vlan_link_state_change_fn(struct net_device *vlan_dev,
struct netdev_nested_priv *priv)
{
struct br_vlan_link_state_walk_data *data = priv->data;
if (br_vlan_is_bind_vlan_dev(vlan_dev))
br_vlan_set_vlan_dev_state(data->br, vlan_dev);
return 0;
}
static void br_vlan_link_state_change(struct net_device *dev,
struct net_bridge *br)
{
struct br_vlan_link_state_walk_data data = {
.br = br
};
struct netdev_nested_priv priv = {
.data = (void *)&data,
};
rcu_read_lock();
netdev_walk_all_upper_dev_rcu(dev, br_vlan_link_state_change_fn,
&priv);
rcu_read_unlock();
}
/* Must be protected by RTNL. */
static void nbp_vlan_set_vlan_dev_state(struct net_bridge_port *p, u16 vid)
{
struct net_device *vlan_dev;
if (!br_opt_get(p->br, BROPT_VLAN_BRIDGE_BINDING))
return;
vlan_dev = br_vlan_get_upper_bind_vlan_dev(p->br->dev, vid);
if (vlan_dev)
br_vlan_set_vlan_dev_state(p->br, vlan_dev);
}
/* Must be protected by RTNL. */
net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER Most of the bridge device's vlan init bugs come from the fact that its default pvid is created at the wrong time, way too early in ndo_init() before the device is even assigned an ifindex. It introduces a bug when the bridge's dev_addr is added as fdb during the initial default pvid creation the notification has ifindex/NDA_MASTER both equal to 0 (see example below) which really makes no sense for user-space[0] and is wrong. Usually user-space software would ignore such entries, but they are actually valid and will eventually have all necessary attributes. It makes much more sense to send a notification *after* the device has registered and has a proper ifindex allocated rather than before when there's a chance that the registration might still fail or to receive it with ifindex/NDA_MASTER == 0. Note that we can remove the fdb flush from br_vlan_flush() since that case can no longer happen. At NETDEV_REGISTER br->default_pvid is always == 1 as it's initialized by br_vlan_init() before that and at NETDEV_UNREGISTER it can be anything depending why it was called (if called due to NETDEV_REGISTER error it'll still be == 1, otherwise it could be any value changed during the device life time). For the demonstration below a small change to iproute2 for printing all fdb notifications is added, because it contained a workaround not to show entries with ifindex == 0. Command executed while monitoring: $ ip l add br0 type bridge Before (both ifindex and master == 0): $ bridge monitor fdb 36:7e:8a:b3:56:ba dev * vlan 1 master * permanent After (proper br0 ifindex): $ bridge monitor fdb e6:2a:ae:7a:b7:48 dev br0 vlan 1 master br0 permanent v4: move only the default pvid init/deinit to NETDEV_REGISTER/UNREGISTER v3: send the correct v2 patch with all changes (stub should return 0) v2: on error in br_vlan_init set br->vlgrp to NULL and return 0 in the br_vlan_bridge_event stub when bridge vlans are disabled [0] https://bugzilla.kernel.org/show_bug.cgi?id=204389 Reported-by: michael-dev <michael-dev@fami-braun.de> Fixes: 5be5a2df40f0 ("bridge: Add filtering support for default_pvid") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-02 18:57:36 +08:00
int br_vlan_bridge_event(struct net_device *dev, unsigned long event, void *ptr)
{
struct netdev_notifier_changeupper_info *info;
net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER Most of the bridge device's vlan init bugs come from the fact that its default pvid is created at the wrong time, way too early in ndo_init() before the device is even assigned an ifindex. It introduces a bug when the bridge's dev_addr is added as fdb during the initial default pvid creation the notification has ifindex/NDA_MASTER both equal to 0 (see example below) which really makes no sense for user-space[0] and is wrong. Usually user-space software would ignore such entries, but they are actually valid and will eventually have all necessary attributes. It makes much more sense to send a notification *after* the device has registered and has a proper ifindex allocated rather than before when there's a chance that the registration might still fail or to receive it with ifindex/NDA_MASTER == 0. Note that we can remove the fdb flush from br_vlan_flush() since that case can no longer happen. At NETDEV_REGISTER br->default_pvid is always == 1 as it's initialized by br_vlan_init() before that and at NETDEV_UNREGISTER it can be anything depending why it was called (if called due to NETDEV_REGISTER error it'll still be == 1, otherwise it could be any value changed during the device life time). For the demonstration below a small change to iproute2 for printing all fdb notifications is added, because it contained a workaround not to show entries with ifindex == 0. Command executed while monitoring: $ ip l add br0 type bridge Before (both ifindex and master == 0): $ bridge monitor fdb 36:7e:8a:b3:56:ba dev * vlan 1 master * permanent After (proper br0 ifindex): $ bridge monitor fdb e6:2a:ae:7a:b7:48 dev br0 vlan 1 master br0 permanent v4: move only the default pvid init/deinit to NETDEV_REGISTER/UNREGISTER v3: send the correct v2 patch with all changes (stub should return 0) v2: on error in br_vlan_init set br->vlgrp to NULL and return 0 in the br_vlan_bridge_event stub when bridge vlans are disabled [0] https://bugzilla.kernel.org/show_bug.cgi?id=204389 Reported-by: michael-dev <michael-dev@fami-braun.de> Fixes: 5be5a2df40f0 ("bridge: Add filtering support for default_pvid") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-02 18:57:36 +08:00
struct net_bridge *br = netdev_priv(dev);
int vlcmd = 0, ret = 0;
bool changed = false;
switch (event) {
net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER Most of the bridge device's vlan init bugs come from the fact that its default pvid is created at the wrong time, way too early in ndo_init() before the device is even assigned an ifindex. It introduces a bug when the bridge's dev_addr is added as fdb during the initial default pvid creation the notification has ifindex/NDA_MASTER both equal to 0 (see example below) which really makes no sense for user-space[0] and is wrong. Usually user-space software would ignore such entries, but they are actually valid and will eventually have all necessary attributes. It makes much more sense to send a notification *after* the device has registered and has a proper ifindex allocated rather than before when there's a chance that the registration might still fail or to receive it with ifindex/NDA_MASTER == 0. Note that we can remove the fdb flush from br_vlan_flush() since that case can no longer happen. At NETDEV_REGISTER br->default_pvid is always == 1 as it's initialized by br_vlan_init() before that and at NETDEV_UNREGISTER it can be anything depending why it was called (if called due to NETDEV_REGISTER error it'll still be == 1, otherwise it could be any value changed during the device life time). For the demonstration below a small change to iproute2 for printing all fdb notifications is added, because it contained a workaround not to show entries with ifindex == 0. Command executed while monitoring: $ ip l add br0 type bridge Before (both ifindex and master == 0): $ bridge monitor fdb 36:7e:8a:b3:56:ba dev * vlan 1 master * permanent After (proper br0 ifindex): $ bridge monitor fdb e6:2a:ae:7a:b7:48 dev br0 vlan 1 master br0 permanent v4: move only the default pvid init/deinit to NETDEV_REGISTER/UNREGISTER v3: send the correct v2 patch with all changes (stub should return 0) v2: on error in br_vlan_init set br->vlgrp to NULL and return 0 in the br_vlan_bridge_event stub when bridge vlans are disabled [0] https://bugzilla.kernel.org/show_bug.cgi?id=204389 Reported-by: michael-dev <michael-dev@fami-braun.de> Fixes: 5be5a2df40f0 ("bridge: Add filtering support for default_pvid") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-02 18:57:36 +08:00
case NETDEV_REGISTER:
ret = br_vlan_add(br, br->default_pvid,
BRIDGE_VLAN_INFO_PVID |
BRIDGE_VLAN_INFO_UNTAGGED |
BRIDGE_VLAN_INFO_BRENTRY, &changed, NULL);
vlcmd = RTM_NEWVLAN;
net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER Most of the bridge device's vlan init bugs come from the fact that its default pvid is created at the wrong time, way too early in ndo_init() before the device is even assigned an ifindex. It introduces a bug when the bridge's dev_addr is added as fdb during the initial default pvid creation the notification has ifindex/NDA_MASTER both equal to 0 (see example below) which really makes no sense for user-space[0] and is wrong. Usually user-space software would ignore such entries, but they are actually valid and will eventually have all necessary attributes. It makes much more sense to send a notification *after* the device has registered and has a proper ifindex allocated rather than before when there's a chance that the registration might still fail or to receive it with ifindex/NDA_MASTER == 0. Note that we can remove the fdb flush from br_vlan_flush() since that case can no longer happen. At NETDEV_REGISTER br->default_pvid is always == 1 as it's initialized by br_vlan_init() before that and at NETDEV_UNREGISTER it can be anything depending why it was called (if called due to NETDEV_REGISTER error it'll still be == 1, otherwise it could be any value changed during the device life time). For the demonstration below a small change to iproute2 for printing all fdb notifications is added, because it contained a workaround not to show entries with ifindex == 0. Command executed while monitoring: $ ip l add br0 type bridge Before (both ifindex and master == 0): $ bridge monitor fdb 36:7e:8a:b3:56:ba dev * vlan 1 master * permanent After (proper br0 ifindex): $ bridge monitor fdb e6:2a:ae:7a:b7:48 dev br0 vlan 1 master br0 permanent v4: move only the default pvid init/deinit to NETDEV_REGISTER/UNREGISTER v3: send the correct v2 patch with all changes (stub should return 0) v2: on error in br_vlan_init set br->vlgrp to NULL and return 0 in the br_vlan_bridge_event stub when bridge vlans are disabled [0] https://bugzilla.kernel.org/show_bug.cgi?id=204389 Reported-by: michael-dev <michael-dev@fami-braun.de> Fixes: 5be5a2df40f0 ("bridge: Add filtering support for default_pvid") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-02 18:57:36 +08:00
break;
case NETDEV_UNREGISTER:
changed = !br_vlan_delete(br, br->default_pvid);
vlcmd = RTM_DELVLAN;
net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER Most of the bridge device's vlan init bugs come from the fact that its default pvid is created at the wrong time, way too early in ndo_init() before the device is even assigned an ifindex. It introduces a bug when the bridge's dev_addr is added as fdb during the initial default pvid creation the notification has ifindex/NDA_MASTER both equal to 0 (see example below) which really makes no sense for user-space[0] and is wrong. Usually user-space software would ignore such entries, but they are actually valid and will eventually have all necessary attributes. It makes much more sense to send a notification *after* the device has registered and has a proper ifindex allocated rather than before when there's a chance that the registration might still fail or to receive it with ifindex/NDA_MASTER == 0. Note that we can remove the fdb flush from br_vlan_flush() since that case can no longer happen. At NETDEV_REGISTER br->default_pvid is always == 1 as it's initialized by br_vlan_init() before that and at NETDEV_UNREGISTER it can be anything depending why it was called (if called due to NETDEV_REGISTER error it'll still be == 1, otherwise it could be any value changed during the device life time). For the demonstration below a small change to iproute2 for printing all fdb notifications is added, because it contained a workaround not to show entries with ifindex == 0. Command executed while monitoring: $ ip l add br0 type bridge Before (both ifindex and master == 0): $ bridge monitor fdb 36:7e:8a:b3:56:ba dev * vlan 1 master * permanent After (proper br0 ifindex): $ bridge monitor fdb e6:2a:ae:7a:b7:48 dev br0 vlan 1 master br0 permanent v4: move only the default pvid init/deinit to NETDEV_REGISTER/UNREGISTER v3: send the correct v2 patch with all changes (stub should return 0) v2: on error in br_vlan_init set br->vlgrp to NULL and return 0 in the br_vlan_bridge_event stub when bridge vlans are disabled [0] https://bugzilla.kernel.org/show_bug.cgi?id=204389 Reported-by: michael-dev <michael-dev@fami-braun.de> Fixes: 5be5a2df40f0 ("bridge: Add filtering support for default_pvid") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-02 18:57:36 +08:00
break;
case NETDEV_CHANGEUPPER:
info = ptr;
br_vlan_upper_change(dev, info->upper_dev, info->linking);
break;
case NETDEV_CHANGE:
case NETDEV_UP:
if (!br_opt_get(br, BROPT_VLAN_BRIDGE_BINDING))
net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER Most of the bridge device's vlan init bugs come from the fact that its default pvid is created at the wrong time, way too early in ndo_init() before the device is even assigned an ifindex. It introduces a bug when the bridge's dev_addr is added as fdb during the initial default pvid creation the notification has ifindex/NDA_MASTER both equal to 0 (see example below) which really makes no sense for user-space[0] and is wrong. Usually user-space software would ignore such entries, but they are actually valid and will eventually have all necessary attributes. It makes much more sense to send a notification *after* the device has registered and has a proper ifindex allocated rather than before when there's a chance that the registration might still fail or to receive it with ifindex/NDA_MASTER == 0. Note that we can remove the fdb flush from br_vlan_flush() since that case can no longer happen. At NETDEV_REGISTER br->default_pvid is always == 1 as it's initialized by br_vlan_init() before that and at NETDEV_UNREGISTER it can be anything depending why it was called (if called due to NETDEV_REGISTER error it'll still be == 1, otherwise it could be any value changed during the device life time). For the demonstration below a small change to iproute2 for printing all fdb notifications is added, because it contained a workaround not to show entries with ifindex == 0. Command executed while monitoring: $ ip l add br0 type bridge Before (both ifindex and master == 0): $ bridge monitor fdb 36:7e:8a:b3:56:ba dev * vlan 1 master * permanent After (proper br0 ifindex): $ bridge monitor fdb e6:2a:ae:7a:b7:48 dev br0 vlan 1 master br0 permanent v4: move only the default pvid init/deinit to NETDEV_REGISTER/UNREGISTER v3: send the correct v2 patch with all changes (stub should return 0) v2: on error in br_vlan_init set br->vlgrp to NULL and return 0 in the br_vlan_bridge_event stub when bridge vlans are disabled [0] https://bugzilla.kernel.org/show_bug.cgi?id=204389 Reported-by: michael-dev <michael-dev@fami-braun.de> Fixes: 5be5a2df40f0 ("bridge: Add filtering support for default_pvid") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-02 18:57:36 +08:00
break;
br_vlan_link_state_change(dev, br);
break;
}
if (changed)
br_vlan_notify(br, NULL, br->default_pvid, 0, vlcmd);
net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER Most of the bridge device's vlan init bugs come from the fact that its default pvid is created at the wrong time, way too early in ndo_init() before the device is even assigned an ifindex. It introduces a bug when the bridge's dev_addr is added as fdb during the initial default pvid creation the notification has ifindex/NDA_MASTER both equal to 0 (see example below) which really makes no sense for user-space[0] and is wrong. Usually user-space software would ignore such entries, but they are actually valid and will eventually have all necessary attributes. It makes much more sense to send a notification *after* the device has registered and has a proper ifindex allocated rather than before when there's a chance that the registration might still fail or to receive it with ifindex/NDA_MASTER == 0. Note that we can remove the fdb flush from br_vlan_flush() since that case can no longer happen. At NETDEV_REGISTER br->default_pvid is always == 1 as it's initialized by br_vlan_init() before that and at NETDEV_UNREGISTER it can be anything depending why it was called (if called due to NETDEV_REGISTER error it'll still be == 1, otherwise it could be any value changed during the device life time). For the demonstration below a small change to iproute2 for printing all fdb notifications is added, because it contained a workaround not to show entries with ifindex == 0. Command executed while monitoring: $ ip l add br0 type bridge Before (both ifindex and master == 0): $ bridge monitor fdb 36:7e:8a:b3:56:ba dev * vlan 1 master * permanent After (proper br0 ifindex): $ bridge monitor fdb e6:2a:ae:7a:b7:48 dev br0 vlan 1 master br0 permanent v4: move only the default pvid init/deinit to NETDEV_REGISTER/UNREGISTER v3: send the correct v2 patch with all changes (stub should return 0) v2: on error in br_vlan_init set br->vlgrp to NULL and return 0 in the br_vlan_bridge_event stub when bridge vlans are disabled [0] https://bugzilla.kernel.org/show_bug.cgi?id=204389 Reported-by: michael-dev <michael-dev@fami-braun.de> Fixes: 5be5a2df40f0 ("bridge: Add filtering support for default_pvid") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-02 18:57:36 +08:00
return ret;
}
/* Must be protected by RTNL. */
void br_vlan_port_event(struct net_bridge_port *p, unsigned long event)
{
if (!br_opt_get(p->br, BROPT_VLAN_BRIDGE_BINDING))
return;
switch (event) {
case NETDEV_CHANGE:
case NETDEV_DOWN:
case NETDEV_UP:
br_vlan_set_all_vlan_dev_state(p);
break;
}
}
static bool br_vlan_stats_fill(struct sk_buff *skb,
const struct net_bridge_vlan *v)
{
struct pcpu_sw_netstats stats;
struct nlattr *nest;
nest = nla_nest_start(skb, BRIDGE_VLANDB_ENTRY_STATS);
if (!nest)
return false;
br_vlan_get_stats(v, &stats);
if (nla_put_u64_64bit(skb, BRIDGE_VLANDB_STATS_RX_BYTES, stats.rx_bytes,
BRIDGE_VLANDB_STATS_PAD) ||
nla_put_u64_64bit(skb, BRIDGE_VLANDB_STATS_RX_PACKETS,
stats.rx_packets, BRIDGE_VLANDB_STATS_PAD) ||
nla_put_u64_64bit(skb, BRIDGE_VLANDB_STATS_TX_BYTES, stats.tx_bytes,
BRIDGE_VLANDB_STATS_PAD) ||
nla_put_u64_64bit(skb, BRIDGE_VLANDB_STATS_TX_PACKETS,
stats.tx_packets, BRIDGE_VLANDB_STATS_PAD))
goto out_err;
nla_nest_end(skb, nest);
return true;
out_err:
nla_nest_cancel(skb, nest);
return false;
}
/* v_opts is used to dump the options which must be equal in the whole range */
static bool br_vlan_fill_vids(struct sk_buff *skb, u16 vid, u16 vid_range,
const struct net_bridge_vlan *v_opts,
u16 flags,
bool dump_stats)
{
struct bridge_vlan_info info;
struct nlattr *nest;
nest = nla_nest_start(skb, BRIDGE_VLANDB_ENTRY);
if (!nest)
return false;
memset(&info, 0, sizeof(info));
info.vid = vid;
if (flags & BRIDGE_VLAN_INFO_UNTAGGED)
info.flags |= BRIDGE_VLAN_INFO_UNTAGGED;
if (flags & BRIDGE_VLAN_INFO_PVID)
info.flags |= BRIDGE_VLAN_INFO_PVID;
if (nla_put(skb, BRIDGE_VLANDB_ENTRY_INFO, sizeof(info), &info))
goto out_err;
if (vid_range && vid < vid_range &&
!(flags & BRIDGE_VLAN_INFO_PVID) &&
nla_put_u16(skb, BRIDGE_VLANDB_ENTRY_RANGE, vid_range))
goto out_err;
if (v_opts) {
if (!br_vlan_opts_fill(skb, v_opts))
goto out_err;
if (dump_stats && !br_vlan_stats_fill(skb, v_opts))
goto out_err;
}
nla_nest_end(skb, nest);
return true;
out_err:
nla_nest_cancel(skb, nest);
return false;
}
static size_t rtnl_vlan_nlmsg_size(void)
{
return NLMSG_ALIGN(sizeof(struct br_vlan_msg))
+ nla_total_size(0) /* BRIDGE_VLANDB_ENTRY */
+ nla_total_size(sizeof(u16)) /* BRIDGE_VLANDB_ENTRY_RANGE */
+ nla_total_size(sizeof(struct bridge_vlan_info)) /* BRIDGE_VLANDB_ENTRY_INFO */
+ br_vlan_opts_nl_size(); /* bridge vlan options */
}
void br_vlan_notify(const struct net_bridge *br,
const struct net_bridge_port *p,
u16 vid, u16 vid_range,
int cmd)
{
struct net_bridge_vlan_group *vg;
struct net_bridge_vlan *v = NULL;
struct br_vlan_msg *bvm;
struct nlmsghdr *nlh;
struct sk_buff *skb;
int err = -ENOBUFS;
struct net *net;
u16 flags = 0;
int ifindex;
/* right now notifications are done only with rtnl held */
ASSERT_RTNL();
if (p) {
ifindex = p->dev->ifindex;
vg = nbp_vlan_group(p);
net = dev_net(p->dev);
} else {
ifindex = br->dev->ifindex;
vg = br_vlan_group(br);
net = dev_net(br->dev);
}
skb = nlmsg_new(rtnl_vlan_nlmsg_size(), GFP_KERNEL);
if (!skb)
goto out_err;
err = -EMSGSIZE;
nlh = nlmsg_put(skb, 0, 0, cmd, sizeof(*bvm), 0);
if (!nlh)
goto out_err;
bvm = nlmsg_data(nlh);
memset(bvm, 0, sizeof(*bvm));
bvm->family = AF_BRIDGE;
bvm->ifindex = ifindex;
switch (cmd) {
case RTM_NEWVLAN:
/* need to find the vlan due to flags/options */
v = br_vlan_find(vg, vid);
if (!v || !br_vlan_should_use(v))
goto out_kfree;
flags = v->flags;
if (br_get_pvid(vg) == v->vid)
flags |= BRIDGE_VLAN_INFO_PVID;
break;
case RTM_DELVLAN:
break;
default:
goto out_kfree;
}
if (!br_vlan_fill_vids(skb, vid, vid_range, v, flags, false))
goto out_err;
nlmsg_end(skb, nlh);
rtnl_notify(skb, net, 0, RTNLGRP_BRVLAN, NULL, GFP_KERNEL);
return;
out_err:
rtnl_set_sk_err(net, RTNLGRP_BRVLAN, err);
out_kfree:
kfree_skb(skb);
}
/* check if v_curr can enter a range ending in range_end */
bool br_vlan_can_enter_range(const struct net_bridge_vlan *v_curr,
const struct net_bridge_vlan *range_end)
{
return v_curr->vid - range_end->vid == 1 &&
range_end->flags == v_curr->flags &&
br_vlan_opts_eq_range(v_curr, range_end);
}
static int br_vlan_dump_dev(const struct net_device *dev,
struct sk_buff *skb,
struct netlink_callback *cb,
u32 dump_flags)
{
struct net_bridge_vlan *v, *range_start = NULL, *range_end = NULL;
bool dump_stats = !!(dump_flags & BRIDGE_VLANDB_DUMPF_STATS);
struct net_bridge_vlan_group *vg;
int idx = 0, s_idx = cb->args[1];
struct nlmsghdr *nlh = NULL;
struct net_bridge_port *p;
struct br_vlan_msg *bvm;
struct net_bridge *br;
int err = 0;
u16 pvid;
if (!netif_is_bridge_master(dev) && !netif_is_bridge_port(dev))
return -EINVAL;
if (netif_is_bridge_master(dev)) {
br = netdev_priv(dev);
vg = br_vlan_group_rcu(br);
p = NULL;
} else {
p = br_port_get_rcu(dev);
if (WARN_ON(!p))
return -EINVAL;
vg = nbp_vlan_group_rcu(p);
br = p->br;
}
if (!vg)
return 0;
nlh = nlmsg_put(skb, NETLINK_CB(cb->skb).portid, cb->nlh->nlmsg_seq,
RTM_NEWVLAN, sizeof(*bvm), NLM_F_MULTI);
if (!nlh)
return -EMSGSIZE;
bvm = nlmsg_data(nlh);
memset(bvm, 0, sizeof(*bvm));
bvm->family = PF_BRIDGE;
bvm->ifindex = dev->ifindex;
pvid = br_get_pvid(vg);
/* idx must stay at range's beginning until it is filled in */
list_for_each_entry_rcu(v, &vg->vlan_list, vlist) {
if (!br_vlan_should_use(v))
continue;
if (idx < s_idx) {
idx++;
continue;
}
if (!range_start) {
range_start = v;
range_end = v;
continue;
}
if (dump_stats || v->vid == pvid ||
!br_vlan_can_enter_range(v, range_end)) {
u16 vlan_flags = br_vlan_flags(range_start, pvid);
if (!br_vlan_fill_vids(skb, range_start->vid,
range_end->vid, range_start,
vlan_flags, dump_stats)) {
err = -EMSGSIZE;
break;
}
/* advance number of filled vlans */
idx += range_end->vid - range_start->vid + 1;
range_start = v;
}
range_end = v;
}
/* err will be 0 and range_start will be set in 3 cases here:
* - first vlan (range_start == range_end)
* - last vlan (range_start == range_end, not in range)
* - last vlan range (range_start != range_end, in range)
*/
if (!err && range_start &&
!br_vlan_fill_vids(skb, range_start->vid, range_end->vid,
range_start, br_vlan_flags(range_start, pvid),
dump_stats))
err = -EMSGSIZE;
cb->args[1] = err ? idx : 0;
nlmsg_end(skb, nlh);
return err;
}
static const struct nla_policy br_vlan_db_dump_pol[BRIDGE_VLANDB_DUMP_MAX + 1] = {
[BRIDGE_VLANDB_DUMP_FLAGS] = { .type = NLA_U32 },
};
static int br_vlan_rtm_dump(struct sk_buff *skb, struct netlink_callback *cb)
{
struct nlattr *dtb[BRIDGE_VLANDB_DUMP_MAX + 1];
int idx = 0, err = 0, s_idx = cb->args[0];
struct net *net = sock_net(skb->sk);
struct br_vlan_msg *bvm;
struct net_device *dev;
u32 dump_flags = 0;
err = nlmsg_parse(cb->nlh, sizeof(*bvm), dtb, BRIDGE_VLANDB_DUMP_MAX,
br_vlan_db_dump_pol, cb->extack);
if (err < 0)
return err;
bvm = nlmsg_data(cb->nlh);
if (dtb[BRIDGE_VLANDB_DUMP_FLAGS])
dump_flags = nla_get_u32(dtb[BRIDGE_VLANDB_DUMP_FLAGS]);
rcu_read_lock();
if (bvm->ifindex) {
dev = dev_get_by_index_rcu(net, bvm->ifindex);
if (!dev) {
err = -ENODEV;
goto out_err;
}
err = br_vlan_dump_dev(dev, skb, cb, dump_flags);
if (err && err != -EMSGSIZE)
goto out_err;
} else {
for_each_netdev_rcu(net, dev) {
if (idx < s_idx)
goto skip;
err = br_vlan_dump_dev(dev, skb, cb, dump_flags);
if (err == -EMSGSIZE)
break;
skip:
idx++;
}
}
cb->args[0] = idx;
rcu_read_unlock();
return skb->len;
out_err:
rcu_read_unlock();
return err;
}
static const struct nla_policy br_vlan_db_policy[BRIDGE_VLANDB_ENTRY_MAX + 1] = {
[BRIDGE_VLANDB_ENTRY_INFO] =
NLA_POLICY_EXACT_LEN(sizeof(struct bridge_vlan_info)),
[BRIDGE_VLANDB_ENTRY_RANGE] = { .type = NLA_U16 },
[BRIDGE_VLANDB_ENTRY_STATE] = { .type = NLA_U8 },
[BRIDGE_VLANDB_ENTRY_TUNNEL_INFO] = { .type = NLA_NESTED },
};
static int br_vlan_rtm_process_one(struct net_device *dev,
const struct nlattr *attr,
int cmd, struct netlink_ext_ack *extack)
{
struct bridge_vlan_info *vinfo, vrange_end, *vinfo_last = NULL;
struct nlattr *tb[BRIDGE_VLANDB_ENTRY_MAX + 1];
bool changed = false, skip_processing = false;
struct net_bridge_vlan_group *vg;
struct net_bridge_port *p = NULL;
int err = 0, cmdmap = 0;
struct net_bridge *br;
if (netif_is_bridge_master(dev)) {
br = netdev_priv(dev);
vg = br_vlan_group(br);
} else {
p = br_port_get_rtnl(dev);
if (WARN_ON(!p))
return -ENODEV;
br = p->br;
vg = nbp_vlan_group(p);
}
if (WARN_ON(!vg))
return -ENODEV;
err = nla_parse_nested(tb, BRIDGE_VLANDB_ENTRY_MAX, attr,
br_vlan_db_policy, extack);
if (err)
return err;
if (!tb[BRIDGE_VLANDB_ENTRY_INFO]) {
NL_SET_ERR_MSG_MOD(extack, "Missing vlan entry info");
return -EINVAL;
}
memset(&vrange_end, 0, sizeof(vrange_end));
vinfo = nla_data(tb[BRIDGE_VLANDB_ENTRY_INFO]);
if (vinfo->flags & (BRIDGE_VLAN_INFO_RANGE_BEGIN |
BRIDGE_VLAN_INFO_RANGE_END)) {
NL_SET_ERR_MSG_MOD(extack, "Old-style vlan ranges are not allowed when using RTM vlan calls");
return -EINVAL;
}
if (!br_vlan_valid_id(vinfo->vid, extack))
return -EINVAL;
if (tb[BRIDGE_VLANDB_ENTRY_RANGE]) {
vrange_end.vid = nla_get_u16(tb[BRIDGE_VLANDB_ENTRY_RANGE]);
/* validate user-provided flags without RANGE_BEGIN */
vrange_end.flags = BRIDGE_VLAN_INFO_RANGE_END | vinfo->flags;
vinfo->flags |= BRIDGE_VLAN_INFO_RANGE_BEGIN;
/* vinfo_last is the range start, vinfo the range end */
vinfo_last = vinfo;
vinfo = &vrange_end;
if (!br_vlan_valid_id(vinfo->vid, extack) ||
!br_vlan_valid_range(vinfo, vinfo_last, extack))
return -EINVAL;
}
switch (cmd) {
case RTM_NEWVLAN:
cmdmap = RTM_SETLINK;
skip_processing = !!(vinfo->flags & BRIDGE_VLAN_INFO_ONLY_OPTS);
break;
case RTM_DELVLAN:
cmdmap = RTM_DELLINK;
break;
}
if (!skip_processing) {
struct bridge_vlan_info *tmp_last = vinfo_last;
/* br_process_vlan_info may overwrite vinfo_last */
err = br_process_vlan_info(br, p, cmdmap, vinfo, &tmp_last,
&changed, extack);
/* notify first if anything changed */
if (changed)
br_ifinfo_notify(cmdmap, br, p);
if (err)
return err;
}
/* deal with options */
if (cmd == RTM_NEWVLAN) {
struct net_bridge_vlan *range_start, *range_end;
if (vinfo_last) {
range_start = br_vlan_find(vg, vinfo_last->vid);
range_end = br_vlan_find(vg, vinfo->vid);
} else {
range_start = br_vlan_find(vg, vinfo->vid);
range_end = range_start;
}
err = br_vlan_process_options(br, p, range_start, range_end,
tb, extack);
}
return err;
}
static int br_vlan_rtm_process(struct sk_buff *skb, struct nlmsghdr *nlh,
struct netlink_ext_ack *extack)
{
struct net *net = sock_net(skb->sk);
struct br_vlan_msg *bvm;
struct net_device *dev;
struct nlattr *attr;
int err, vlans = 0;
int rem;
/* this should validate the header and check for remaining bytes */
err = nlmsg_parse(nlh, sizeof(*bvm), NULL, BRIDGE_VLANDB_MAX, NULL,
extack);
if (err < 0)
return err;
bvm = nlmsg_data(nlh);
dev = __dev_get_by_index(net, bvm->ifindex);
if (!dev)
return -ENODEV;
if (!netif_is_bridge_master(dev) && !netif_is_bridge_port(dev)) {
NL_SET_ERR_MSG_MOD(extack, "The device is not a valid bridge or bridge port");
return -EINVAL;
}
nlmsg_for_each_attr(attr, nlh, sizeof(*bvm), rem) {
if (nla_type(attr) != BRIDGE_VLANDB_ENTRY)
continue;
vlans++;
err = br_vlan_rtm_process_one(dev, attr, nlh->nlmsg_type,
extack);
if (err)
break;
}
if (!vlans) {
NL_SET_ERR_MSG_MOD(extack, "No vlans found to process");
err = -EINVAL;
}
return err;
}
void br_vlan_rtnl_init(void)
{
rtnl_register_module(THIS_MODULE, PF_BRIDGE, RTM_GETVLAN, NULL,
br_vlan_rtm_dump, 0);
rtnl_register_module(THIS_MODULE, PF_BRIDGE, RTM_NEWVLAN,
br_vlan_rtm_process, NULL, 0);
rtnl_register_module(THIS_MODULE, PF_BRIDGE, RTM_DELVLAN,
br_vlan_rtm_process, NULL, 0);
}
void br_vlan_rtnl_uninit(void)
{
rtnl_unregister(PF_BRIDGE, RTM_GETVLAN);
rtnl_unregister(PF_BRIDGE, RTM_NEWVLAN);
rtnl_unregister(PF_BRIDGE, RTM_DELVLAN);
}