OpenCloudOS-Kernel/arch/x86/mm/numa.c

965 lines
24 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/* Common code for 32 and 64-bit NUMA */
#include <linux/acpi.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/memblock.h>
#include <linux/mmzone.h>
#include <linux/ctype.h>
#include <linux/nodemask.h>
#include <linux/sched.h>
#include <linux/topology.h>
#include <asm/e820/api.h>
#include <asm/proto.h>
#include <asm/dma.h>
#include <asm/amd_nb.h>
#include "numa_internal.h"
int numa_off;
nodemask_t numa_nodes_parsed __initdata;
struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
EXPORT_SYMBOL(node_data);
static struct numa_meminfo numa_meminfo __initdata_or_meminfo;
x86/NUMA: Provide a range-to-target_node lookup facility The DEV_DAX_KMEM facility is a generic mechanism to allow device-dax instances, fronting performance-differentiated-memory like pmem, to be added to the System RAM pool. The NUMA node for that hot-added memory is derived from the device-dax instance's 'target_node' attribute. Recall that the 'target_node' is the ACPI-PXM-to-node translation for memory when it comes online whereas the 'numa_node' attribute of the device represents the closest online cpu node. Presently useful target_node information from the ACPI SRAT is discarded with the expectation that "Reserved" memory will never be onlined. Now, DEV_DAX_KMEM violates that assumption, there is a need to retain the translation. Move, rather than discard, numa_memblk data to a secondary array that memory_add_physaddr_to_target_node() may consider at a later point in time. Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <x86@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/158188326978.894464.217282995221175417.stgit@dwillia2-desk3.amr.corp.intel.com
2020-02-17 04:01:09 +08:00
static struct numa_meminfo numa_reserved_meminfo __initdata_or_meminfo;
static int numa_distance_cnt;
static u8 *numa_distance;
static __init int numa_setup(char *opt)
{
if (!opt)
return -EINVAL;
if (!strncmp(opt, "off", 3))
numa_off = 1;
if (!strncmp(opt, "fake=", 5))
x86/numa: cleanup configuration dependent command-line options Patch series "device-dax: Support sub-dividing soft-reserved ranges", v5. The device-dax facility allows an address range to be directly mapped through a chardev, or optionally hotplugged to the core kernel page allocator as System-RAM. It is the mechanism for converting persistent memory (pmem) to be used as another volatile memory pool i.e. the current Memory Tiering hot topic on linux-mm. In the case of pmem the nvdimm-namespace-label mechanism can sub-divide it, but that labeling mechanism is not available / applicable to soft-reserved ("EFI specific purpose") memory [3]. This series provides a sysfs-mechanism for the daxctl utility to enable provisioning of volatile-soft-reserved memory ranges. The motivations for this facility are: 1/ Allow performance differentiated memory ranges to be split between kernel-managed and directly-accessed use cases. 2/ Allow physical memory to be provisioned along performance relevant address boundaries. For example, divide a memory-side cache [4] along cache-color boundaries. 3/ Parcel out soft-reserved memory to VMs using device-dax as a security / permissions boundary [5]. Specifically I have seen people (ab)using memmap=nn!ss (mark System-RAM as Persistent Memory) just to get the device-dax interface on custom address ranges. A follow-on for the VM use case is to teach device-dax to dynamically allocate 'struct page' at runtime to reduce the duplication of 'struct page' space in both the guest and the host kernel for the same physical pages. [2]: http://lore.kernel.org/r/20200713160837.13774-11-joao.m.martins@oracle.com [3]: http://lore.kernel.org/r/157309097008.1579826.12818463304589384434.stgit@dwillia2-desk3.amr.corp.intel.com [4]: http://lore.kernel.org/r/154899811738.3165233.12325692939590944259.stgit@dwillia2-desk3.amr.corp.intel.com [5]: http://lore.kernel.org/r/20200110190313.17144-1-joao.m.martins@oracle.com This patch (of 23): In preparation for adding a new numa= option clean up the existing ones to avoid ifdefs in numa_setup(), and provide feedback when the option is numa=fake= option is invalid due to kernel config. The same does not need to be done for numa=noacpi, since the capability is already hard disabled at compile-time. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brice Goglin <Brice.Goglin@inria.fr> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Will Deacon <will@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Hulk Robot <hulkci@huawei.com> Cc: Jason Yan <yanaijie@huawei.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: kernel test robot <lkp@intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Link: https://lkml.kernel.org/r/160106109960.30709.7379926726669669398.stgit@dwillia2-desk3.amr.corp.intel.com Link: https://lkml.kernel.org/r/159643094279.4062302.17779410714418721328.stgit@dwillia2-desk3.amr.corp.intel.com Link: https://lkml.kernel.org/r/159643094925.4062302.14979872973043772305.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-14 07:48:57 +08:00
return numa_emu_cmdline(opt + 5);
if (!strncmp(opt, "noacpi", 6))
x86/numa: cleanup configuration dependent command-line options Patch series "device-dax: Support sub-dividing soft-reserved ranges", v5. The device-dax facility allows an address range to be directly mapped through a chardev, or optionally hotplugged to the core kernel page allocator as System-RAM. It is the mechanism for converting persistent memory (pmem) to be used as another volatile memory pool i.e. the current Memory Tiering hot topic on linux-mm. In the case of pmem the nvdimm-namespace-label mechanism can sub-divide it, but that labeling mechanism is not available / applicable to soft-reserved ("EFI specific purpose") memory [3]. This series provides a sysfs-mechanism for the daxctl utility to enable provisioning of volatile-soft-reserved memory ranges. The motivations for this facility are: 1/ Allow performance differentiated memory ranges to be split between kernel-managed and directly-accessed use cases. 2/ Allow physical memory to be provisioned along performance relevant address boundaries. For example, divide a memory-side cache [4] along cache-color boundaries. 3/ Parcel out soft-reserved memory to VMs using device-dax as a security / permissions boundary [5]. Specifically I have seen people (ab)using memmap=nn!ss (mark System-RAM as Persistent Memory) just to get the device-dax interface on custom address ranges. A follow-on for the VM use case is to teach device-dax to dynamically allocate 'struct page' at runtime to reduce the duplication of 'struct page' space in both the guest and the host kernel for the same physical pages. [2]: http://lore.kernel.org/r/20200713160837.13774-11-joao.m.martins@oracle.com [3]: http://lore.kernel.org/r/157309097008.1579826.12818463304589384434.stgit@dwillia2-desk3.amr.corp.intel.com [4]: http://lore.kernel.org/r/154899811738.3165233.12325692939590944259.stgit@dwillia2-desk3.amr.corp.intel.com [5]: http://lore.kernel.org/r/20200110190313.17144-1-joao.m.martins@oracle.com This patch (of 23): In preparation for adding a new numa= option clean up the existing ones to avoid ifdefs in numa_setup(), and provide feedback when the option is numa=fake= option is invalid due to kernel config. The same does not need to be done for numa=noacpi, since the capability is already hard disabled at compile-time. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brice Goglin <Brice.Goglin@inria.fr> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Will Deacon <will@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Hulk Robot <hulkci@huawei.com> Cc: Jason Yan <yanaijie@huawei.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: kernel test robot <lkp@intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Link: https://lkml.kernel.org/r/160106109960.30709.7379926726669669398.stgit@dwillia2-desk3.amr.corp.intel.com Link: https://lkml.kernel.org/r/159643094279.4062302.17779410714418721328.stgit@dwillia2-desk3.amr.corp.intel.com Link: https://lkml.kernel.org/r/159643094925.4062302.14979872973043772305.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-14 07:48:57 +08:00
disable_srat();
x86/numa: add 'nohmat' option Disable parsing of the HMAT for debug, to workaround broken platform instances, or cases where it is otherwise not wanted. [rdunlap@infradead.org: fix build when CONFIG_ACPI is not set] Link: https://lkml.kernel.org/r/70e5ee34-9809-a997-7b49-499e4be61307@infradead.org Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Brice Goglin <Brice.Goglin@inria.fr> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Will Deacon <will@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Hulk Robot <hulkci@huawei.com> Cc: Jason Yan <yanaijie@huawei.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: kernel test robot <lkp@intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Link: https://lkml.kernel.org/r/159643095540.4062302.732962081968036212.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-14 07:49:02 +08:00
if (!strncmp(opt, "nohmat", 6))
disable_hmat();
return 0;
}
early_param("numa", numa_setup);
/*
* apicid, cpu, node mappings
*/
cpu_hotplug: clear apicid to node when the cpu is hotremoved When a cpu is hotpluged, we call acpi_map_cpu2node() in _acpi_map_lsapic() to store the cpu's node and apicid's node. But we don't clear the cpu's node in acpi_unmap_lsapic() when this cpu is hotremoved. If the node is also hotremoved, we will get the following messages: kernel BUG at include/linux/gfp.h:329! invalid opcode: 0000 [#1] SMP Modules linked in: ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat xt_CHECKSUM iptable_mangle bridge stp llc sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables binfmt_misc dm_mirror dm_region_hash dm_log dm_mod vhost_net macvtap macvlan tun uinput iTCO_wdt iTCO_vendor_support coretemp kvm_intel kvm crc32c_intel microcode pcspkr i2c_i801 i2c_core lpc_ich mfd_core ioatdma e1000e i7core_edac edac_core sg acpi_memhotplug igb dca sd_mod crc_t10dif megaraid_sas mptsas mptscsih mptbase scsi_transport_sas scsi_mod Pid: 3126, comm: init Not tainted 3.6.0-rc3-tangchen-hostbridge+ #13 FUJITSU-SV PRIMEQUEST 1800E/SB RIP: 0010:[<ffffffff811bc3fd>] [<ffffffff811bc3fd>] allocate_slab+0x28d/0x300 RSP: 0018:ffff88078a049cf8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000001 RDI: 0000000000000246 RBP: ffff88078a049d38 R08: 00000000000040d0 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000b5f R12: 00000000000052d0 R13: ffff8807c1417300 R14: 0000000000030038 R15: 0000000000000003 FS: 00007fa9b1b44700(0000) GS:ffff8807c3800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007fa9b09acca0 CR3: 000000078b855000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process init (pid: 3126, threadinfo ffff88078a048000, task ffff8807bb6f2650) Call Trace: new_slab+0x30/0x1b0 __slab_alloc+0x358/0x4c0 kmem_cache_alloc_node_trace+0xb4/0x1e0 alloc_fair_sched_group+0xd0/0x1b0 sched_create_group+0x3e/0x110 sched_autogroup_create_attach+0x4d/0x180 sys_setsid+0xd4/0xf0 system_call_fastpath+0x16/0x1b Code: 89 c4 e9 73 fe ff ff 31 c0 89 de 48 c7 c7 45 de 9e 81 44 89 45 c8 e8 22 05 4b 00 85 db 44 8b 45 c8 0f 89 4f ff ff ff 0f 0b eb fe <0f> 0b 90 eb fd 0f 0b eb fe 89 de 48 c7 c7 45 de 9e 81 31 c0 44 RIP [<ffffffff811bc3fd>] allocate_slab+0x28d/0x300 RSP <ffff88078a049cf8> ---[ end trace adf84c90f3fea3e5 ]--- The reason is that the cpu's node is not NUMA_NO_NODE, we will call alloc_pages_exact_node() to alloc memory on the node, but the node is offlined. If the node is onlined, we still need cpu's node. For example: a task on the cpu is sleeped when the cpu is hotremoved. We will choose another cpu to run this task when it is waked up. If we know the cpu's node, we will choose the cpu on the same node first. So we should clear cpu-to-node mapping when the node is offlined. This patch only clears apicid-to-node mapping when the cpu is hotremoved. [akpm@linux-foundation.org: fix section error] Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 08:33:24 +08:00
s16 __apicid_to_node[MAX_LOCAL_APIC] = {
[0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE
};
x86: delete __cpuinit usage from all x86 files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/x86 uses of the __cpuinit macros from all C files. x86 only had the one __CPUINIT used in assembly files, and it wasn't paired off with a .previous or a __FINIT, so we can delete it directly w/o any corresponding additional change there. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-19 06:23:59 +08:00
int numa_cpu_node(int cpu)
{
int apicid = early_per_cpu(x86_cpu_to_apicid, cpu);
if (apicid != BAD_APICID)
return __apicid_to_node[apicid];
return NUMA_NO_NODE;
}
cpumask_var_t node_to_cpumask_map[MAX_NUMNODES];
EXPORT_SYMBOL(node_to_cpumask_map);
/*
* Map cpu index to node index
*/
DEFINE_EARLY_PER_CPU(int, x86_cpu_to_node_map, NUMA_NO_NODE);
EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_node_map);
void numa_set_node(int cpu, int node)
{
int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map);
/* early setting, no percpu area yet */
if (cpu_to_node_map) {
cpu_to_node_map[cpu] = node;
return;
}
#ifdef CONFIG_DEBUG_PER_CPU_MAPS
if (cpu >= nr_cpu_ids || !cpu_possible(cpu)) {
printk(KERN_ERR "numa_set_node: invalid cpu# (%d)\n", cpu);
dump_stack();
return;
}
#endif
per_cpu(x86_cpu_to_node_map, cpu) = node;
set_cpu_numa_node(cpu, node);
}
void numa_clear_node(int cpu)
{
numa_set_node(cpu, NUMA_NO_NODE);
}
/*
* Allocate node_to_cpumask_map based on number of available nodes
* Requires node_possible_map to be valid.
*
* Note: cpumask_of_node() is not valid until after this is done.
* (Use CONFIG_DEBUG_PER_CPU_MAPS to check this.)
*/
void __init setup_node_to_cpumask_map(void)
{
unsigned int node;
/* setup nr_node_ids if not done yet */
if (nr_node_ids == MAX_NUMNODES)
setup_nr_node_ids();
/* allocate the map */
for (node = 0; node < nr_node_ids; node++)
alloc_bootmem_cpumask_var(&node_to_cpumask_map[node]);
/* cpumask_of_node() will now work */
pr_debug("Node to cpumask map for %u nodes\n", nr_node_ids);
}
static int __init numa_add_memblk_to(int nid, u64 start, u64 end,
struct numa_meminfo *mi)
{
/* ignore zero length blks */
if (start == end)
return 0;
/* whine about and ignore invalid blks */
if (start > end || nid < 0 || nid >= MAX_NUMNODES) {
pr_warn("Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",
nid, start, end - 1);
return 0;
}
if (mi->nr_blks >= NR_NODE_MEMBLKS) {
pr_err("too many memblk ranges\n");
return -EINVAL;
}
mi->blk[mi->nr_blks].start = start;
mi->blk[mi->nr_blks].end = end;
mi->blk[mi->nr_blks].nid = nid;
mi->nr_blks++;
return 0;
}
/**
* numa_remove_memblk_from - Remove one numa_memblk from a numa_meminfo
* @idx: Index of memblk to remove
* @mi: numa_meminfo to remove memblk from
*
* Remove @idx'th numa_memblk from @mi by shifting @mi->blk[] and
* decrementing @mi->nr_blks.
*/
void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi)
{
mi->nr_blks--;
memmove(&mi->blk[idx], &mi->blk[idx + 1],
(mi->nr_blks - idx) * sizeof(mi->blk[0]));
}
x86/NUMA: Provide a range-to-target_node lookup facility The DEV_DAX_KMEM facility is a generic mechanism to allow device-dax instances, fronting performance-differentiated-memory like pmem, to be added to the System RAM pool. The NUMA node for that hot-added memory is derived from the device-dax instance's 'target_node' attribute. Recall that the 'target_node' is the ACPI-PXM-to-node translation for memory when it comes online whereas the 'numa_node' attribute of the device represents the closest online cpu node. Presently useful target_node information from the ACPI SRAT is discarded with the expectation that "Reserved" memory will never be onlined. Now, DEV_DAX_KMEM violates that assumption, there is a need to retain the translation. Move, rather than discard, numa_memblk data to a secondary array that memory_add_physaddr_to_target_node() may consider at a later point in time. Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <x86@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/158188326978.894464.217282995221175417.stgit@dwillia2-desk3.amr.corp.intel.com
2020-02-17 04:01:09 +08:00
/**
* numa_move_tail_memblk - Move a numa_memblk from one numa_meminfo to another
* @dst: numa_meminfo to append block to
* @idx: Index of memblk to remove
* @src: numa_meminfo to remove memblk from
*/
static void __init numa_move_tail_memblk(struct numa_meminfo *dst, int idx,
struct numa_meminfo *src)
{
dst->blk[dst->nr_blks++] = src->blk[idx];
numa_remove_memblk_from(idx, src);
}
/**
* numa_add_memblk - Add one numa_memblk to numa_meminfo
* @nid: NUMA node ID of the new memblk
* @start: Start address of the new memblk
* @end: End address of the new memblk
*
* Add a new memblk to the default numa_meminfo.
*
* RETURNS:
* 0 on success, -errno on failure.
*/
int __init numa_add_memblk(int nid, u64 start, u64 end)
{
return numa_add_memblk_to(nid, start, end, &numa_meminfo);
}
x86/mm/numa: Drop dead code and rename setup_node_data() to setup_alloc_data() The setup_node_data() function allocates a pg_data_t object, inserts it into the node_data[] array and initializes the following fields: node_id, node_start_pfn and node_spanned_pages. However, a few function calls later during the kernel boot, free_area_init_node() re-initializes those fields, possibly with setup_node_data() is not used. This causes a small glitch when running Linux as a hyperv numa guest: SRAT: PXM 0 -> APIC 0x00 -> Node 0 SRAT: PXM 0 -> APIC 0x01 -> Node 0 SRAT: PXM 1 -> APIC 0x02 -> Node 1 SRAT: PXM 1 -> APIC 0x03 -> Node 1 SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff] SRAT: Node 1 PXM 1 [mem 0x80200000-0xf7ffffff] SRAT: Node 1 PXM 1 [mem 0x100000000-0x1081fffff] NUMA: Node 1 [mem 0x80200000-0xf7ffffff] + [mem 0x100000000-0x1081fffff] -> [mem 0x80200000-0x1081fffff] Initmem setup node 0 [mem 0x00000000-0x7fffffff] NODE_DATA [mem 0x7ffdc000-0x7ffeffff] Initmem setup node 1 [mem 0x80800000-0x1081fffff] NODE_DATA [mem 0x1081ea000-0x1081fdfff] crashkernel: memory value expected [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007de00000-ffff88007fdfffff] on node 0 [ffffea0002000000-ffffea00043fffff] PMD -> [ffff880105600000-ffff8801077fffff] on node 1 Zone ranges: DMA [mem 0x00001000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal [mem 0x100000000-0x1081fffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009efff] node 0: [mem 0x00100000-0x7ffeffff] node 1: [mem 0x80200000-0xf7ffffff] node 1: [mem 0x100000000-0x1081fffff] On node 0 totalpages: 524174 DMA zone: 64 pages used for memmap DMA zone: 21 pages reserved DMA zone: 3998 pages, LIFO batch:0 DMA32 zone: 8128 pages used for memmap DMA32 zone: 520176 pages, LIFO batch:31 On node 1 totalpages: 524288 DMA32 zone: 7672 pages used for memmap DMA32 zone: 491008 pages, LIFO batch:31 Normal zone: 520 pages used for memmap Normal zone: 33280 pages, LIFO batch:7 In this dmesg, the SRAT table reports that the memory range for node 1 starts at 0x80200000. However, the line starting with "Initmem" reports that node 1 memory range starts at 0x80800000. The "Initmem" line is reported by setup_node_data() and is wrong, because the kernel ends up using the range as reported in the SRAT table. This commit drops all that dead code from setup_node_data(), renames it to alloc_node_data() and adds a printk() to free_area_init_node() so that we report a node's memory range accurately. Here's the same dmesg section with this patch applied: SRAT: PXM 0 -> APIC 0x00 -> Node 0 SRAT: PXM 0 -> APIC 0x01 -> Node 0 SRAT: PXM 1 -> APIC 0x02 -> Node 1 SRAT: PXM 1 -> APIC 0x03 -> Node 1 SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff] SRAT: Node 1 PXM 1 [mem 0x80200000-0xf7ffffff] SRAT: Node 1 PXM 1 [mem 0x100000000-0x1081fffff] NUMA: Node 1 [mem 0x80200000-0xf7ffffff] + [mem 0x100000000-0x1081fffff] -> [mem 0x80200000-0x1081fffff] NODE_DATA(0) allocated [mem 0x7ffdc000-0x7ffeffff] NODE_DATA(1) allocated [mem 0x1081ea000-0x1081fdfff] crashkernel: memory value expected [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007de00000-ffff88007fdfffff] on node 0 [ffffea0002000000-ffffea00043fffff] PMD -> [ffff880105600000-ffff8801077fffff] on node 1 Zone ranges: DMA [mem 0x00001000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal [mem 0x100000000-0x1081fffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009efff] node 0: [mem 0x00100000-0x7ffeffff] node 1: [mem 0x80200000-0xf7ffffff] node 1: [mem 0x100000000-0x1081fffff] Initmem setup node 0 [mem 0x00001000-0x7ffeffff] On node 0 totalpages: 524174 DMA zone: 64 pages used for memmap DMA zone: 21 pages reserved DMA zone: 3998 pages, LIFO batch:0 DMA32 zone: 8128 pages used for memmap DMA32 zone: 520176 pages, LIFO batch:31 Initmem setup node 1 [mem 0x80200000-0x1081fffff] On node 1 totalpages: 524288 DMA32 zone: 7672 pages used for memmap DMA32 zone: 491008 pages, LIFO batch:31 Normal zone: 520 pages used for memmap Normal zone: 33280 pages, LIFO batch:7 This commit was tested on a two node bare-metal NUMA machine and Linux as a numa guest on hyperv and qemu/kvm. PS: The wrong memory range reported by setup_node_data() seems to be harmless in the current kernel because it's just not used. However, that bad range is used in kernel 2.6.32 to initialize the old boot memory allocator, which causes a crash during boot. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Rientjes <rientjes@google.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-23 04:27:36 +08:00
/* Allocate NODE_DATA for a node on the local memory */
static void __init alloc_node_data(int nid)
{
const size_t nd_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
u64 nd_pa;
void *nd;
int tnid;
/*
* Allocate node data. Try node-local memory and then any node.
* Never allocate in DMA zone.
*/
memblock: drop __memblock_alloc_base() The __memblock_alloc_base() function tries to allocate a memory up to the limit specified by its max_addr parameter. Depending on the value of this parameter, the __memblock_alloc_base() can is replaced with the appropriate memblock_phys_alloc*() variant. Link: http://lkml.kernel.org/r/1548057848-15136-9-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 14:29:31 +08:00
nd_pa = memblock_phys_alloc_try_nid(nd_size, SMP_CACHE_BYTES, nid);
if (!nd_pa) {
memblock: drop __memblock_alloc_base() The __memblock_alloc_base() function tries to allocate a memory up to the limit specified by its max_addr parameter. Depending on the value of this parameter, the __memblock_alloc_base() can is replaced with the appropriate memblock_phys_alloc*() variant. Link: http://lkml.kernel.org/r/1548057848-15136-9-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 14:29:31 +08:00
pr_err("Cannot find %zu bytes in any node (initial node: %d)\n",
nd_size, nid);
return;
}
nd = __va(nd_pa);
/* report and initialize */
x86/mm/numa: Drop dead code and rename setup_node_data() to setup_alloc_data() The setup_node_data() function allocates a pg_data_t object, inserts it into the node_data[] array and initializes the following fields: node_id, node_start_pfn and node_spanned_pages. However, a few function calls later during the kernel boot, free_area_init_node() re-initializes those fields, possibly with setup_node_data() is not used. This causes a small glitch when running Linux as a hyperv numa guest: SRAT: PXM 0 -> APIC 0x00 -> Node 0 SRAT: PXM 0 -> APIC 0x01 -> Node 0 SRAT: PXM 1 -> APIC 0x02 -> Node 1 SRAT: PXM 1 -> APIC 0x03 -> Node 1 SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff] SRAT: Node 1 PXM 1 [mem 0x80200000-0xf7ffffff] SRAT: Node 1 PXM 1 [mem 0x100000000-0x1081fffff] NUMA: Node 1 [mem 0x80200000-0xf7ffffff] + [mem 0x100000000-0x1081fffff] -> [mem 0x80200000-0x1081fffff] Initmem setup node 0 [mem 0x00000000-0x7fffffff] NODE_DATA [mem 0x7ffdc000-0x7ffeffff] Initmem setup node 1 [mem 0x80800000-0x1081fffff] NODE_DATA [mem 0x1081ea000-0x1081fdfff] crashkernel: memory value expected [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007de00000-ffff88007fdfffff] on node 0 [ffffea0002000000-ffffea00043fffff] PMD -> [ffff880105600000-ffff8801077fffff] on node 1 Zone ranges: DMA [mem 0x00001000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal [mem 0x100000000-0x1081fffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009efff] node 0: [mem 0x00100000-0x7ffeffff] node 1: [mem 0x80200000-0xf7ffffff] node 1: [mem 0x100000000-0x1081fffff] On node 0 totalpages: 524174 DMA zone: 64 pages used for memmap DMA zone: 21 pages reserved DMA zone: 3998 pages, LIFO batch:0 DMA32 zone: 8128 pages used for memmap DMA32 zone: 520176 pages, LIFO batch:31 On node 1 totalpages: 524288 DMA32 zone: 7672 pages used for memmap DMA32 zone: 491008 pages, LIFO batch:31 Normal zone: 520 pages used for memmap Normal zone: 33280 pages, LIFO batch:7 In this dmesg, the SRAT table reports that the memory range for node 1 starts at 0x80200000. However, the line starting with "Initmem" reports that node 1 memory range starts at 0x80800000. The "Initmem" line is reported by setup_node_data() and is wrong, because the kernel ends up using the range as reported in the SRAT table. This commit drops all that dead code from setup_node_data(), renames it to alloc_node_data() and adds a printk() to free_area_init_node() so that we report a node's memory range accurately. Here's the same dmesg section with this patch applied: SRAT: PXM 0 -> APIC 0x00 -> Node 0 SRAT: PXM 0 -> APIC 0x01 -> Node 0 SRAT: PXM 1 -> APIC 0x02 -> Node 1 SRAT: PXM 1 -> APIC 0x03 -> Node 1 SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff] SRAT: Node 1 PXM 1 [mem 0x80200000-0xf7ffffff] SRAT: Node 1 PXM 1 [mem 0x100000000-0x1081fffff] NUMA: Node 1 [mem 0x80200000-0xf7ffffff] + [mem 0x100000000-0x1081fffff] -> [mem 0x80200000-0x1081fffff] NODE_DATA(0) allocated [mem 0x7ffdc000-0x7ffeffff] NODE_DATA(1) allocated [mem 0x1081ea000-0x1081fdfff] crashkernel: memory value expected [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007de00000-ffff88007fdfffff] on node 0 [ffffea0002000000-ffffea00043fffff] PMD -> [ffff880105600000-ffff8801077fffff] on node 1 Zone ranges: DMA [mem 0x00001000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal [mem 0x100000000-0x1081fffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009efff] node 0: [mem 0x00100000-0x7ffeffff] node 1: [mem 0x80200000-0xf7ffffff] node 1: [mem 0x100000000-0x1081fffff] Initmem setup node 0 [mem 0x00001000-0x7ffeffff] On node 0 totalpages: 524174 DMA zone: 64 pages used for memmap DMA zone: 21 pages reserved DMA zone: 3998 pages, LIFO batch:0 DMA32 zone: 8128 pages used for memmap DMA32 zone: 520176 pages, LIFO batch:31 Initmem setup node 1 [mem 0x80200000-0x1081fffff] On node 1 totalpages: 524288 DMA32 zone: 7672 pages used for memmap DMA32 zone: 491008 pages, LIFO batch:31 Normal zone: 520 pages used for memmap Normal zone: 33280 pages, LIFO batch:7 This commit was tested on a two node bare-metal NUMA machine and Linux as a numa guest on hyperv and qemu/kvm. PS: The wrong memory range reported by setup_node_data() seems to be harmless in the current kernel because it's just not used. However, that bad range is used in kernel 2.6.32 to initialize the old boot memory allocator, which causes a crash during boot. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Rientjes <rientjes@google.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-23 04:27:36 +08:00
printk(KERN_INFO "NODE_DATA(%d) allocated [mem %#010Lx-%#010Lx]\n", nid,
nd_pa, nd_pa + nd_size - 1);
tnid = early_pfn_to_nid(nd_pa >> PAGE_SHIFT);
if (tnid != nid)
printk(KERN_INFO " NODE_DATA(%d) on node %d\n", nid, tnid);
node_data[nid] = nd;
memset(NODE_DATA(nid), 0, sizeof(pg_data_t));
node_set_online(nid);
}
/**
* numa_cleanup_meminfo - Cleanup a numa_meminfo
* @mi: numa_meminfo to clean up
*
* Sanitize @mi by merging and removing unnecessary memblks. Also check for
* conflicts and clear unused memblks.
*
* RETURNS:
* 0 on success, -errno on failure.
*/
int __init numa_cleanup_meminfo(struct numa_meminfo *mi)
{
const u64 low = 0;
const u64 high = PFN_PHYS(max_pfn);
int i, j, k;
/* first, trim all entries */
for (i = 0; i < mi->nr_blks; i++) {
struct numa_memblk *bi = &mi->blk[i];
x86/NUMA: Provide a range-to-target_node lookup facility The DEV_DAX_KMEM facility is a generic mechanism to allow device-dax instances, fronting performance-differentiated-memory like pmem, to be added to the System RAM pool. The NUMA node for that hot-added memory is derived from the device-dax instance's 'target_node' attribute. Recall that the 'target_node' is the ACPI-PXM-to-node translation for memory when it comes online whereas the 'numa_node' attribute of the device represents the closest online cpu node. Presently useful target_node information from the ACPI SRAT is discarded with the expectation that "Reserved" memory will never be onlined. Now, DEV_DAX_KMEM violates that assumption, there is a need to retain the translation. Move, rather than discard, numa_memblk data to a secondary array that memory_add_physaddr_to_target_node() may consider at a later point in time. Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <x86@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/158188326978.894464.217282995221175417.stgit@dwillia2-desk3.amr.corp.intel.com
2020-02-17 04:01:09 +08:00
/* move / save reserved memory ranges */
if (!memblock_overlaps_region(&memblock.memory,
bi->start, bi->end - bi->start)) {
numa_move_tail_memblk(&numa_reserved_meminfo, i--, mi);
continue;
}
/* make sure all non-reserved blocks are inside the limits */
bi->start = max(bi->start, low);
x86/mm: Avoid truncating memblocks for SGX memory tl;dr: Several SGX users reported seeing the following message on NUMA systems: sgx: [Firmware Bug]: Unable to map EPC section to online node. Fallback to the NUMA node 0. This turned out to be the memblock code mistakenly throwing away SGX memory. === Full Changelog === The 'max_pfn' variable represents the highest known RAM address. It can be used, for instance, to quickly determine for which physical addresses there is mem_map[] space allocated. The numa_meminfo code makes an effort to throw out ("trim") all memory blocks which are above 'max_pfn'. SGX memory is not considered RAM (it is marked as "Reserved" in the e820) and is not taken into account by max_pfn. Despite this, SGX memory areas have NUMA affinity and are enumerated in the ACPI SRAT table. The existing SGX code uses the numa_meminfo mechanism to look up the NUMA affinity for its memory areas. In cases where SGX memory was above max_pfn (usually just the one EPC section in the last highest NUMA node), the numa_memblock is truncated at 'max_pfn', which is below the SGX memory. When the SGX code tries to look up the affinity of this memory, it fails and produces an error message: sgx: [Firmware Bug]: Unable to map EPC section to online node. Fallback to the NUMA node 0. and assigns the memory to NUMA node 0. Instead of silently truncating the memory block at 'max_pfn' and dropping the SGX memory, add the truncated portion to 'numa_reserved_meminfo'. This allows the SGX code to later determine the NUMA affinity of its 'Reserved' area. Before, numa_meminfo looked like this (from 'crash'): blk = { start = 0x0, end = 0x2080000000, nid = 0x0 } { start = 0x2080000000, end = 0x4000000000, nid = 0x1 } numa_reserved_meminfo is empty. With this, numa_meminfo looks like this: blk = { start = 0x0, end = 0x2080000000, nid = 0x0 } { start = 0x2080000000, end = 0x4000000000, nid = 0x1 } and numa_reserved_meminfo has an entry for node 1's SGX memory: blk = { start = 0x4000000000, end = 0x4080000000, nid = 0x1 } [ daveh: completely rewrote/reworked changelog ] Fixes: 5d30f92e7631 ("x86/NUMA: Provide a range-to-target_node lookup facility") Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Fan Du <fan.du@intel.com> Signed-off-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20210617194657.0A99CB22@viggo.jf.intel.com
2021-06-18 03:46:57 +08:00
/* preserve info for non-RAM areas above 'max_pfn': */
if (bi->end > high) {
numa_add_memblk_to(bi->nid, high, bi->end,
&numa_reserved_meminfo);
bi->end = high;
}
x86/NUMA: Provide a range-to-target_node lookup facility The DEV_DAX_KMEM facility is a generic mechanism to allow device-dax instances, fronting performance-differentiated-memory like pmem, to be added to the System RAM pool. The NUMA node for that hot-added memory is derived from the device-dax instance's 'target_node' attribute. Recall that the 'target_node' is the ACPI-PXM-to-node translation for memory when it comes online whereas the 'numa_node' attribute of the device represents the closest online cpu node. Presently useful target_node information from the ACPI SRAT is discarded with the expectation that "Reserved" memory will never be onlined. Now, DEV_DAX_KMEM violates that assumption, there is a need to retain the translation. Move, rather than discard, numa_memblk data to a secondary array that memory_add_physaddr_to_target_node() may consider at a later point in time. Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <x86@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/158188326978.894464.217282995221175417.stgit@dwillia2-desk3.amr.corp.intel.com
2020-02-17 04:01:09 +08:00
/* and there's no empty block */
if (bi->start >= bi->end)
numa_remove_memblk_from(i--, mi);
}
/* merge neighboring / overlapping entries */
for (i = 0; i < mi->nr_blks; i++) {
struct numa_memblk *bi = &mi->blk[i];
for (j = i + 1; j < mi->nr_blks; j++) {
struct numa_memblk *bj = &mi->blk[j];
u64 start, end;
/*
* See whether there are overlapping blocks. Whine
* about but allow overlaps of the same nid. They
* will be merged below.
*/
if (bi->end > bj->start && bi->start < bj->end) {
if (bi->nid != bj->nid) {
pr_err("node %d [mem %#010Lx-%#010Lx] overlaps with node %d [mem %#010Lx-%#010Lx]\n",
bi->nid, bi->start, bi->end - 1,
bj->nid, bj->start, bj->end - 1);
return -EINVAL;
}
pr_warn("Warning: node %d [mem %#010Lx-%#010Lx] overlaps with itself [mem %#010Lx-%#010Lx]\n",
bi->nid, bi->start, bi->end - 1,
bj->start, bj->end - 1);
}
/*
* Join together blocks on the same node, holes
* between which don't overlap with memory on other
* nodes.
*/
if (bi->nid != bj->nid)
continue;
start = min(bi->start, bj->start);
end = max(bi->end, bj->end);
for (k = 0; k < mi->nr_blks; k++) {
struct numa_memblk *bk = &mi->blk[k];
if (bi->nid == bk->nid)
continue;
if (start < bk->end && end > bk->start)
break;
}
if (k < mi->nr_blks)
continue;
printk(KERN_INFO "NUMA: Node %d [mem %#010Lx-%#010Lx] + [mem %#010Lx-%#010Lx] -> [mem %#010Lx-%#010Lx]\n",
bi->nid, bi->start, bi->end - 1, bj->start,
bj->end - 1, start, end - 1);
bi->start = start;
bi->end = end;
numa_remove_memblk_from(j--, mi);
}
}
/* clear unused ones */
for (i = mi->nr_blks; i < ARRAY_SIZE(mi->blk); i++) {
mi->blk[i].start = mi->blk[i].end = 0;
mi->blk[i].nid = NUMA_NO_NODE;
}
return 0;
}
/*
* Set nodes, which have memory in @mi, in *@nodemask.
*/
static void __init numa_nodemask_from_meminfo(nodemask_t *nodemask,
const struct numa_meminfo *mi)
{
int i;
for (i = 0; i < ARRAY_SIZE(mi->blk); i++)
if (mi->blk[i].start != mi->blk[i].end &&
mi->blk[i].nid != NUMA_NO_NODE)
node_set(mi->blk[i].nid, *nodemask);
}
/**
* numa_reset_distance - Reset NUMA distance table
*
* The current table is freed. The next numa_set_distance() call will
* create a new one.
*/
void __init numa_reset_distance(void)
{
size_t size = numa_distance_cnt * numa_distance_cnt * sizeof(numa_distance[0]);
/* numa_distance could be 1LU marking allocation failure, test cnt */
if (numa_distance_cnt)
memblock_free(numa_distance, size);
numa_distance_cnt = 0;
numa_distance = NULL; /* enable table creation */
}
static int __init numa_alloc_distance(void)
{
nodemask_t nodes_parsed;
size_t size;
int i, j, cnt = 0;
u64 phys;
/* size the new table and allocate it */
nodes_parsed = numa_nodes_parsed;
numa_nodemask_from_meminfo(&nodes_parsed, &numa_meminfo);
for_each_node_mask(i, nodes_parsed)
cnt = i;
cnt++;
size = cnt * cnt * sizeof(numa_distance[0]);
phys = memblock_phys_alloc_range(size, PAGE_SIZE, 0,
PFN_PHYS(max_pfn_mapped));
if (!phys) {
pr_warn("Warning: can't allocate distance table!\n");
/* don't retry until explicitly reset */
numa_distance = (void *)1LU;
return -ENOMEM;
}
numa_distance = __va(phys);
numa_distance_cnt = cnt;
/* fill with the default distances */
for (i = 0; i < cnt; i++)
for (j = 0; j < cnt; j++)
numa_distance[i * cnt + j] = i == j ?
LOCAL_DISTANCE : REMOTE_DISTANCE;
printk(KERN_DEBUG "NUMA: Initialized distance table, cnt=%d\n", cnt);
return 0;
}
/**
* numa_set_distance - Set NUMA distance from one NUMA to another
* @from: the 'from' node to set distance
* @to: the 'to' node to set distance
* @distance: NUMA distance
*
* Set the distance from node @from to @to to @distance. If distance table
* doesn't exist, one which is large enough to accommodate all the currently
* known nodes will be created.
*
* If such table cannot be allocated, a warning is printed and further
* calls are ignored until the distance table is reset with
* numa_reset_distance().
*
* If @from or @to is higher than the highest known node or lower than zero
* at the time of table creation or @distance doesn't make sense, the call
* is ignored.
* This is to allow simplification of specific NUMA config implementations.
*/
void __init numa_set_distance(int from, int to, int distance)
{
if (!numa_distance && numa_alloc_distance() < 0)
return;
if (from >= numa_distance_cnt || to >= numa_distance_cnt ||
from < 0 || to < 0) {
pr_warn_once("Warning: node ids are out of bound, from=%d to=%d distance=%d\n",
from, to, distance);
return;
}
if ((u8)distance != distance ||
(from == to && distance != LOCAL_DISTANCE)) {
pr_warn_once("Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
from, to, distance);
return;
}
numa_distance[from * numa_distance_cnt + to] = distance;
}
int __node_distance(int from, int to)
{
if (from >= numa_distance_cnt || to >= numa_distance_cnt)
return from == to ? LOCAL_DISTANCE : REMOTE_DISTANCE;
return numa_distance[from * numa_distance_cnt + to];
}
EXPORT_SYMBOL(__node_distance);
/*
* Sanity check to catch more bad NUMA configurations (they are amazingly
* common). Make sure the nodes cover all memory.
*/
static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi)
{
u64 numaram, e820ram;
int i;
numaram = 0;
for (i = 0; i < mi->nr_blks; i++) {
u64 s = mi->blk[i].start >> PAGE_SHIFT;
u64 e = mi->blk[i].end >> PAGE_SHIFT;
numaram += e - s;
numaram -= __absent_pages_in_range(mi->blk[i].nid, s, e);
if ((s64)numaram < 0)
numaram = 0;
}
e820ram = max_pfn - absent_pages_in_range(0, max_pfn);
/* We seem to lose 3 pages somewhere. Allow 1M of slack. */
if ((s64)(e820ram - numaram) >= (1 << (20 - PAGE_SHIFT))) {
printk(KERN_ERR "NUMA: nodes only cover %LuMB of your %LuMB e820 RAM. Not used.\n",
(numaram << PAGE_SHIFT) >> 20,
(e820ram << PAGE_SHIFT) >> 20);
return false;
}
return true;
}
/*
* Mark all currently memblock-reserved physical memory (which covers the
* kernel's own memory ranges) as hot-unswappable.
*/
static void __init numa_clear_kernel_node_hotplug(void)
{
nodemask_t reserved_nodemask = NODE_MASK_NONE;
struct memblock_region *mb_region;
int i;
/*
* We have to do some preprocessing of memblock regions, to
* make them suitable for reservation.
*
* At this time, all memory regions reserved by memblock are
* used by the kernel, but those regions are not split up
* along node boundaries yet, and don't necessarily have their
* node ID set yet either.
*
* So iterate over all memory known to the x86 architecture,
* and use those ranges to set the nid in memblock.reserved.
* This will split up the memblock regions along node
* boundaries and will set the node IDs as well.
*/
for (i = 0; i < numa_meminfo.nr_blks; i++) {
struct numa_memblk *mb = numa_meminfo.blk + i;
int ret;
ret = memblock_set_node(mb->start, mb->end - mb->start, &memblock.reserved, mb->nid);
WARN_ON_ONCE(ret);
}
x86/mm/numa: Fix kernel stack corruption in numa_init()->numa_clear_kernel_node_hotplug() I got below kernel panic during kdump test on Thinkpad T420 laptop: [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000037ba4fff] [ 0.000000] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81d21910 ... [ 0.000000] Call Trace: [ 0.000000] [<ffffffff817c2a26>] dump_stack+0x45/0x57 [ 0.000000] [<ffffffff817bc8d2>] panic+0xd0/0x204 [ 0.000000] [<ffffffff81d21910>] ? numa_clear_kernel_node_hotplug+0xe6/0xf2 [ 0.000000] [<ffffffff8107741b>] __stack_chk_fail+0x1b/0x20 [ 0.000000] [<ffffffff81d21910>] numa_clear_kernel_node_hotplug+0xe6/0xf2 [ 0.000000] [<ffffffff81d21e5d>] numa_init+0x1a5/0x520 [ 0.000000] [<ffffffff81d222b1>] x86_numa_init+0x19/0x3d [ 0.000000] [<ffffffff81d22460>] initmem_init+0x9/0xb [ 0.000000] [<ffffffff81d0d00c>] setup_arch+0x94f/0xc82 [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff817bd0bb>] ? printk+0x55/0x6b [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff81d05d9b>] start_kernel+0xe8/0x4d6 [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff81d055ee>] x86_64_start_reservations+0x2a/0x2c [ 0.000000] [<ffffffff81d05751>] x86_64_start_kernel+0x161/0x184 [ 0.000000] ---[ end Kernel panic - not syncing: stack-protector: Kernel sta This is caused by writing over the end of numa mask bitmap in numa_clear_kernel_node(). numa_clear_kernel_node() tries to set the node id in a mask bitmap, by iterating all reserved regions and assuming that every region has a valid nid. This assumption is not true because there's an exception for some graphic memory quirks. See trim_snb_memory() in arch/x86/kernel/setup.c It is easily to reproduce the bug in the kdump kernel because kdump kernel use pre-reserved memory instead of the whole memory, but kexec pass other reserved memory ranges to 2nd kernel as well. like below in my test: kdump kernel ram 0x2d000000 - 0x37bfffff One of the reserved regions: 0x40000000 - 0x40100000 which includes 0x40004000, a page excluded in trim_snb_memory(). For this memblock reserved region the nid is not set, it is still default value MAX_NUMNODES. later node_set will set bit MAX_NUMNODES thus stack corruption happen. This also happens when booting with mem= kernel commandline during my test. Fixing it by adding a check, do not call node_set in case nid is MAX_NUMNODES. Signed-off-by: Dave Young <dyoung@redhat.com> Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bhe@redhat.com Cc: qiuxishi@huawei.com Link: http://lkml.kernel.org/r/20150407134132.GA23522@dhcp-16-198.nay.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-07 21:41:32 +08:00
/*
* Now go over all reserved memblock regions, to construct a
* node mask of all kernel reserved memory areas.
x86/mm/numa: Fix kernel stack corruption in numa_init()->numa_clear_kernel_node_hotplug() I got below kernel panic during kdump test on Thinkpad T420 laptop: [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000037ba4fff] [ 0.000000] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81d21910 ... [ 0.000000] Call Trace: [ 0.000000] [<ffffffff817c2a26>] dump_stack+0x45/0x57 [ 0.000000] [<ffffffff817bc8d2>] panic+0xd0/0x204 [ 0.000000] [<ffffffff81d21910>] ? numa_clear_kernel_node_hotplug+0xe6/0xf2 [ 0.000000] [<ffffffff8107741b>] __stack_chk_fail+0x1b/0x20 [ 0.000000] [<ffffffff81d21910>] numa_clear_kernel_node_hotplug+0xe6/0xf2 [ 0.000000] [<ffffffff81d21e5d>] numa_init+0x1a5/0x520 [ 0.000000] [<ffffffff81d222b1>] x86_numa_init+0x19/0x3d [ 0.000000] [<ffffffff81d22460>] initmem_init+0x9/0xb [ 0.000000] [<ffffffff81d0d00c>] setup_arch+0x94f/0xc82 [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff817bd0bb>] ? printk+0x55/0x6b [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff81d05d9b>] start_kernel+0xe8/0x4d6 [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff81d055ee>] x86_64_start_reservations+0x2a/0x2c [ 0.000000] [<ffffffff81d05751>] x86_64_start_kernel+0x161/0x184 [ 0.000000] ---[ end Kernel panic - not syncing: stack-protector: Kernel sta This is caused by writing over the end of numa mask bitmap in numa_clear_kernel_node(). numa_clear_kernel_node() tries to set the node id in a mask bitmap, by iterating all reserved regions and assuming that every region has a valid nid. This assumption is not true because there's an exception for some graphic memory quirks. See trim_snb_memory() in arch/x86/kernel/setup.c It is easily to reproduce the bug in the kdump kernel because kdump kernel use pre-reserved memory instead of the whole memory, but kexec pass other reserved memory ranges to 2nd kernel as well. like below in my test: kdump kernel ram 0x2d000000 - 0x37bfffff One of the reserved regions: 0x40000000 - 0x40100000 which includes 0x40004000, a page excluded in trim_snb_memory(). For this memblock reserved region the nid is not set, it is still default value MAX_NUMNODES. later node_set will set bit MAX_NUMNODES thus stack corruption happen. This also happens when booting with mem= kernel commandline during my test. Fixing it by adding a check, do not call node_set in case nid is MAX_NUMNODES. Signed-off-by: Dave Young <dyoung@redhat.com> Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bhe@redhat.com Cc: qiuxishi@huawei.com Link: http://lkml.kernel.org/r/20150407134132.GA23522@dhcp-16-198.nay.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-07 21:41:32 +08:00
*
* [ Note, when booting with mem=nn[kMG] or in a kdump kernel,
* numa_meminfo might not include all memblock.reserved
* memory ranges, because quirks such as trim_snb_memory()
* reserve specific pages for Sandy Bridge graphics. ]
x86/mm/numa: Fix kernel stack corruption in numa_init()->numa_clear_kernel_node_hotplug() I got below kernel panic during kdump test on Thinkpad T420 laptop: [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000037ba4fff] [ 0.000000] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81d21910 ... [ 0.000000] Call Trace: [ 0.000000] [<ffffffff817c2a26>] dump_stack+0x45/0x57 [ 0.000000] [<ffffffff817bc8d2>] panic+0xd0/0x204 [ 0.000000] [<ffffffff81d21910>] ? numa_clear_kernel_node_hotplug+0xe6/0xf2 [ 0.000000] [<ffffffff8107741b>] __stack_chk_fail+0x1b/0x20 [ 0.000000] [<ffffffff81d21910>] numa_clear_kernel_node_hotplug+0xe6/0xf2 [ 0.000000] [<ffffffff81d21e5d>] numa_init+0x1a5/0x520 [ 0.000000] [<ffffffff81d222b1>] x86_numa_init+0x19/0x3d [ 0.000000] [<ffffffff81d22460>] initmem_init+0x9/0xb [ 0.000000] [<ffffffff81d0d00c>] setup_arch+0x94f/0xc82 [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff817bd0bb>] ? printk+0x55/0x6b [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff81d05d9b>] start_kernel+0xe8/0x4d6 [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff81d055ee>] x86_64_start_reservations+0x2a/0x2c [ 0.000000] [<ffffffff81d05751>] x86_64_start_kernel+0x161/0x184 [ 0.000000] ---[ end Kernel panic - not syncing: stack-protector: Kernel sta This is caused by writing over the end of numa mask bitmap in numa_clear_kernel_node(). numa_clear_kernel_node() tries to set the node id in a mask bitmap, by iterating all reserved regions and assuming that every region has a valid nid. This assumption is not true because there's an exception for some graphic memory quirks. See trim_snb_memory() in arch/x86/kernel/setup.c It is easily to reproduce the bug in the kdump kernel because kdump kernel use pre-reserved memory instead of the whole memory, but kexec pass other reserved memory ranges to 2nd kernel as well. like below in my test: kdump kernel ram 0x2d000000 - 0x37bfffff One of the reserved regions: 0x40000000 - 0x40100000 which includes 0x40004000, a page excluded in trim_snb_memory(). For this memblock reserved region the nid is not set, it is still default value MAX_NUMNODES. later node_set will set bit MAX_NUMNODES thus stack corruption happen. This also happens when booting with mem= kernel commandline during my test. Fixing it by adding a check, do not call node_set in case nid is MAX_NUMNODES. Signed-off-by: Dave Young <dyoung@redhat.com> Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bhe@redhat.com Cc: qiuxishi@huawei.com Link: http://lkml.kernel.org/r/20150407134132.GA23522@dhcp-16-198.nay.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-07 21:41:32 +08:00
*/
memblock: use separate iterators for memory and reserved regions for_each_memblock() is used to iterate over memblock.memory in a few places that use data from memblock_region rather than the memory ranges. Introduce separate for_each_mem_region() and for_each_reserved_mem_region() to improve encapsulation of memblock internals from its users. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Baoquan He <bhe@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> [x86] Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> [MIPS] Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [.clang-format] Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-18-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-14 07:58:30 +08:00
for_each_reserved_mem_region(mb_region) {
mm: memblock: replace dereferences of memblock_region.nid with API calls Patch series "mm: rework free_area_init*() funcitons". After the discussion [1] about removal of CONFIG_NODES_SPAN_OTHER_NODES and CONFIG_HAVE_MEMBLOCK_NODE_MAP options, I took it a bit further and updated the node/zone initialization. Since all architectures have memblock, it is possible to use only the newer version of free_area_init_node() that calculates the zone and node boundaries based on memblock node mapping and architectural limits on possible zone PFNs. The architectures that still determined zone and hole sizes can be switched to the generic code and the old code that took those zone and hole sizes can be simply removed. And, since it all started from the removal of CONFIG_NODES_SPAN_OTHER_NODES, the memmap_init() is now updated to iterate over memblocks and so it does not need to perform early_pfn_to_nid() query for every PFN. [1] https://lore.kernel.org/lkml/1585420282-25630-1-git-send-email-Hoan@os.amperecomputing.com This patch (of 21): There are several places in the code that directly dereference memblock_region.nid despite this field being defined only when CONFIG_HAVE_MEMBLOCK_NODE_MAP=y. Replace these with calls to memblock_get_region_nid() to improve code robustness and to avoid possible breakage when CONFIG_HAVE_MEMBLOCK_NODE_MAP will be removed. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200412194859.12663-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200412194859.12663-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 06:56:53 +08:00
int nid = memblock_get_region_node(mb_region);
if (nid != MAX_NUMNODES)
node_set(nid, reserved_nodemask);
}
/*
* Finally, clear the MEMBLOCK_HOTPLUG flag for all memory
* belonging to the reserved node mask.
*
* Note that this will include memory regions that reside
* on nodes that contain kernel memory - entire nodes
* become hot-unpluggable:
*/
for (i = 0; i < numa_meminfo.nr_blks; i++) {
struct numa_memblk *mb = numa_meminfo.blk + i;
if (!node_isset(mb->nid, reserved_nodemask))
continue;
memblock_clear_hotplug(mb->start, mb->end - mb->start);
}
}
static int __init numa_register_memblks(struct numa_meminfo *mi)
{
int i, nid;
/* Account for nodes with cpus and no memory */
node_possible_map = numa_nodes_parsed;
numa_nodemask_from_meminfo(&node_possible_map, mi);
if (WARN_ON(nodes_empty(node_possible_map)))
return -EINVAL;
for (i = 0; i < mi->nr_blks; i++) {
struct numa_memblk *mb = &mi->blk[i];
memblock_set_node(mb->start, mb->end - mb->start,
&memblock.memory, mb->nid);
}
x86, numa: Implement pfn -> nid mapping granularity check SPARSEMEM w/o VMEMMAP and DISCONTIGMEM, both used only on 32bit, use sections array to map pfn to nid which is limited in granularity. If NUMA nodes are laid out such that the mapping cannot be accurate, boot will fail triggering BUG_ON() in mminit_verify_page_links(). On 32bit, it's 512MiB w/ PAE and SPARSEMEM. This seems to have been granular enough until commit 2706a0bf7b (x86, NUMA: Enable CONFIG_AMD_NUMA on 32bit too). Apparently, there is a machine which aligns NUMA nodes to 128MiB and has only AMD NUMA but not SRAT. This led to the following BUG_ON(). On node 0 totalpages: 2096615 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3927 pages, LIFO batch:0 Normal zone: 1740 pages used for memmap Normal zone: 220978 pages, LIFO batch:31 HighMem zone: 16405 pages used for memmap HighMem zone: 1853533 pages, LIFO batch:31 BUG: Int 6: CR2 (null) EDI (null) ESI 00000002 EBP 00000002 ESP c1543ecc EBX f2400000 EDX 00000006 ECX (null) EAX 00000001 err (null) EIP c16209aa CS 00000060 flg 00010002 Stack: f2400000 00220000 f7200800 c1620613 00220000 01000000 04400000 00238000 (null) f7200000 00000002 f7200b58 f7200800 c1620929 000375fe (null) f7200b80 c16395f0 00200a02 f7200a80 (null) 000375fe 00000002 (null) Pid: 0, comm: swapper Not tainted 2.6.39-rc5-00181-g2706a0b #17 Call Trace: [<c136b1e5>] ? early_fault+0x2e/0x2e [<c16209aa>] ? mminit_verify_page_links+0x12/0x42 [<c1620613>] ? memmap_init_zone+0xaf/0x10c [<c1620929>] ? free_area_init_node+0x2b9/0x2e3 [<c1607e99>] ? free_area_init_nodes+0x3f2/0x451 [<c1601d80>] ? paging_init+0x112/0x118 [<c15f578d>] ? setup_arch+0x791/0x82f [<c15f43d9>] ? start_kernel+0x6a/0x257 This patch implements node_map_pfn_alignment() which determines maximum internode alignment and update numa_register_memblks() to reject NUMA configuration if alignment exceeds the pfn -> nid mapping granularity of the memory model as determined by PAGES_PER_SECTION. This makes the problematic machine boot w/ flatmem by rejecting the NUMA config and provides protection against crazy NUMA configurations. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/20110712074534.GB2872@htj.dyndns.org LKML-Reference: <20110628174613.GP478@escobedo.osrc.amd.com> Reported-and-Tested-by: Hans Rosenfeld <hans.rosenfeld@amd.com> Cc: Conny Seidel <conny.seidel@amd.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-12 15:45:34 +08:00
/*
* At very early time, the kernel have to use some memory such as
* loading the kernel image. We cannot prevent this anyway. So any
* node the kernel resides in should be un-hotpluggable.
*
* And when we come here, alloc node data won't fail.
*/
numa_clear_kernel_node_hotplug();
x86, numa: Implement pfn -> nid mapping granularity check SPARSEMEM w/o VMEMMAP and DISCONTIGMEM, both used only on 32bit, use sections array to map pfn to nid which is limited in granularity. If NUMA nodes are laid out such that the mapping cannot be accurate, boot will fail triggering BUG_ON() in mminit_verify_page_links(). On 32bit, it's 512MiB w/ PAE and SPARSEMEM. This seems to have been granular enough until commit 2706a0bf7b (x86, NUMA: Enable CONFIG_AMD_NUMA on 32bit too). Apparently, there is a machine which aligns NUMA nodes to 128MiB and has only AMD NUMA but not SRAT. This led to the following BUG_ON(). On node 0 totalpages: 2096615 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3927 pages, LIFO batch:0 Normal zone: 1740 pages used for memmap Normal zone: 220978 pages, LIFO batch:31 HighMem zone: 16405 pages used for memmap HighMem zone: 1853533 pages, LIFO batch:31 BUG: Int 6: CR2 (null) EDI (null) ESI 00000002 EBP 00000002 ESP c1543ecc EBX f2400000 EDX 00000006 ECX (null) EAX 00000001 err (null) EIP c16209aa CS 00000060 flg 00010002 Stack: f2400000 00220000 f7200800 c1620613 00220000 01000000 04400000 00238000 (null) f7200000 00000002 f7200b58 f7200800 c1620929 000375fe (null) f7200b80 c16395f0 00200a02 f7200a80 (null) 000375fe 00000002 (null) Pid: 0, comm: swapper Not tainted 2.6.39-rc5-00181-g2706a0b #17 Call Trace: [<c136b1e5>] ? early_fault+0x2e/0x2e [<c16209aa>] ? mminit_verify_page_links+0x12/0x42 [<c1620613>] ? memmap_init_zone+0xaf/0x10c [<c1620929>] ? free_area_init_node+0x2b9/0x2e3 [<c1607e99>] ? free_area_init_nodes+0x3f2/0x451 [<c1601d80>] ? paging_init+0x112/0x118 [<c15f578d>] ? setup_arch+0x791/0x82f [<c15f43d9>] ? start_kernel+0x6a/0x257 This patch implements node_map_pfn_alignment() which determines maximum internode alignment and update numa_register_memblks() to reject NUMA configuration if alignment exceeds the pfn -> nid mapping granularity of the memory model as determined by PAGES_PER_SECTION. This makes the problematic machine boot w/ flatmem by rejecting the NUMA config and provides protection against crazy NUMA configurations. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/20110712074534.GB2872@htj.dyndns.org LKML-Reference: <20110628174613.GP478@escobedo.osrc.amd.com> Reported-and-Tested-by: Hans Rosenfeld <hans.rosenfeld@amd.com> Cc: Conny Seidel <conny.seidel@amd.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-12 15:45:34 +08:00
/*
* If sections array is gonna be used for pfn -> nid mapping, check
* whether its granularity is fine enough.
*/
if (IS_ENABLED(NODE_NOT_IN_PAGE_FLAGS)) {
unsigned long pfn_align = node_map_pfn_alignment();
if (pfn_align && pfn_align < PAGES_PER_SECTION) {
pr_warn("Node alignment %LuMB < min %LuMB, rejecting NUMA config\n",
PFN_PHYS(pfn_align) >> 20,
PFN_PHYS(PAGES_PER_SECTION) >> 20);
return -EINVAL;
}
x86, numa: Implement pfn -> nid mapping granularity check SPARSEMEM w/o VMEMMAP and DISCONTIGMEM, both used only on 32bit, use sections array to map pfn to nid which is limited in granularity. If NUMA nodes are laid out such that the mapping cannot be accurate, boot will fail triggering BUG_ON() in mminit_verify_page_links(). On 32bit, it's 512MiB w/ PAE and SPARSEMEM. This seems to have been granular enough until commit 2706a0bf7b (x86, NUMA: Enable CONFIG_AMD_NUMA on 32bit too). Apparently, there is a machine which aligns NUMA nodes to 128MiB and has only AMD NUMA but not SRAT. This led to the following BUG_ON(). On node 0 totalpages: 2096615 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3927 pages, LIFO batch:0 Normal zone: 1740 pages used for memmap Normal zone: 220978 pages, LIFO batch:31 HighMem zone: 16405 pages used for memmap HighMem zone: 1853533 pages, LIFO batch:31 BUG: Int 6: CR2 (null) EDI (null) ESI 00000002 EBP 00000002 ESP c1543ecc EBX f2400000 EDX 00000006 ECX (null) EAX 00000001 err (null) EIP c16209aa CS 00000060 flg 00010002 Stack: f2400000 00220000 f7200800 c1620613 00220000 01000000 04400000 00238000 (null) f7200000 00000002 f7200b58 f7200800 c1620929 000375fe (null) f7200b80 c16395f0 00200a02 f7200a80 (null) 000375fe 00000002 (null) Pid: 0, comm: swapper Not tainted 2.6.39-rc5-00181-g2706a0b #17 Call Trace: [<c136b1e5>] ? early_fault+0x2e/0x2e [<c16209aa>] ? mminit_verify_page_links+0x12/0x42 [<c1620613>] ? memmap_init_zone+0xaf/0x10c [<c1620929>] ? free_area_init_node+0x2b9/0x2e3 [<c1607e99>] ? free_area_init_nodes+0x3f2/0x451 [<c1601d80>] ? paging_init+0x112/0x118 [<c15f578d>] ? setup_arch+0x791/0x82f [<c15f43d9>] ? start_kernel+0x6a/0x257 This patch implements node_map_pfn_alignment() which determines maximum internode alignment and update numa_register_memblks() to reject NUMA configuration if alignment exceeds the pfn -> nid mapping granularity of the memory model as determined by PAGES_PER_SECTION. This makes the problematic machine boot w/ flatmem by rejecting the NUMA config and provides protection against crazy NUMA configurations. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/20110712074534.GB2872@htj.dyndns.org LKML-Reference: <20110628174613.GP478@escobedo.osrc.amd.com> Reported-and-Tested-by: Hans Rosenfeld <hans.rosenfeld@amd.com> Cc: Conny Seidel <conny.seidel@amd.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-12 15:45:34 +08:00
}
if (!numa_meminfo_cover_memory(mi))
return -EINVAL;
/* Finally register nodes. */
for_each_node_mask(nid, node_possible_map) {
u64 start = PFN_PHYS(max_pfn);
u64 end = 0;
for (i = 0; i < mi->nr_blks; i++) {
if (nid != mi->blk[i].nid)
continue;
start = min(mi->blk[i].start, start);
end = max(mi->blk[i].end, end);
}
x86/mm/numa: Drop dead code and rename setup_node_data() to setup_alloc_data() The setup_node_data() function allocates a pg_data_t object, inserts it into the node_data[] array and initializes the following fields: node_id, node_start_pfn and node_spanned_pages. However, a few function calls later during the kernel boot, free_area_init_node() re-initializes those fields, possibly with setup_node_data() is not used. This causes a small glitch when running Linux as a hyperv numa guest: SRAT: PXM 0 -> APIC 0x00 -> Node 0 SRAT: PXM 0 -> APIC 0x01 -> Node 0 SRAT: PXM 1 -> APIC 0x02 -> Node 1 SRAT: PXM 1 -> APIC 0x03 -> Node 1 SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff] SRAT: Node 1 PXM 1 [mem 0x80200000-0xf7ffffff] SRAT: Node 1 PXM 1 [mem 0x100000000-0x1081fffff] NUMA: Node 1 [mem 0x80200000-0xf7ffffff] + [mem 0x100000000-0x1081fffff] -> [mem 0x80200000-0x1081fffff] Initmem setup node 0 [mem 0x00000000-0x7fffffff] NODE_DATA [mem 0x7ffdc000-0x7ffeffff] Initmem setup node 1 [mem 0x80800000-0x1081fffff] NODE_DATA [mem 0x1081ea000-0x1081fdfff] crashkernel: memory value expected [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007de00000-ffff88007fdfffff] on node 0 [ffffea0002000000-ffffea00043fffff] PMD -> [ffff880105600000-ffff8801077fffff] on node 1 Zone ranges: DMA [mem 0x00001000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal [mem 0x100000000-0x1081fffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009efff] node 0: [mem 0x00100000-0x7ffeffff] node 1: [mem 0x80200000-0xf7ffffff] node 1: [mem 0x100000000-0x1081fffff] On node 0 totalpages: 524174 DMA zone: 64 pages used for memmap DMA zone: 21 pages reserved DMA zone: 3998 pages, LIFO batch:0 DMA32 zone: 8128 pages used for memmap DMA32 zone: 520176 pages, LIFO batch:31 On node 1 totalpages: 524288 DMA32 zone: 7672 pages used for memmap DMA32 zone: 491008 pages, LIFO batch:31 Normal zone: 520 pages used for memmap Normal zone: 33280 pages, LIFO batch:7 In this dmesg, the SRAT table reports that the memory range for node 1 starts at 0x80200000. However, the line starting with "Initmem" reports that node 1 memory range starts at 0x80800000. The "Initmem" line is reported by setup_node_data() and is wrong, because the kernel ends up using the range as reported in the SRAT table. This commit drops all that dead code from setup_node_data(), renames it to alloc_node_data() and adds a printk() to free_area_init_node() so that we report a node's memory range accurately. Here's the same dmesg section with this patch applied: SRAT: PXM 0 -> APIC 0x00 -> Node 0 SRAT: PXM 0 -> APIC 0x01 -> Node 0 SRAT: PXM 1 -> APIC 0x02 -> Node 1 SRAT: PXM 1 -> APIC 0x03 -> Node 1 SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff] SRAT: Node 1 PXM 1 [mem 0x80200000-0xf7ffffff] SRAT: Node 1 PXM 1 [mem 0x100000000-0x1081fffff] NUMA: Node 1 [mem 0x80200000-0xf7ffffff] + [mem 0x100000000-0x1081fffff] -> [mem 0x80200000-0x1081fffff] NODE_DATA(0) allocated [mem 0x7ffdc000-0x7ffeffff] NODE_DATA(1) allocated [mem 0x1081ea000-0x1081fdfff] crashkernel: memory value expected [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007de00000-ffff88007fdfffff] on node 0 [ffffea0002000000-ffffea00043fffff] PMD -> [ffff880105600000-ffff8801077fffff] on node 1 Zone ranges: DMA [mem 0x00001000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal [mem 0x100000000-0x1081fffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009efff] node 0: [mem 0x00100000-0x7ffeffff] node 1: [mem 0x80200000-0xf7ffffff] node 1: [mem 0x100000000-0x1081fffff] Initmem setup node 0 [mem 0x00001000-0x7ffeffff] On node 0 totalpages: 524174 DMA zone: 64 pages used for memmap DMA zone: 21 pages reserved DMA zone: 3998 pages, LIFO batch:0 DMA32 zone: 8128 pages used for memmap DMA32 zone: 520176 pages, LIFO batch:31 Initmem setup node 1 [mem 0x80200000-0x1081fffff] On node 1 totalpages: 524288 DMA32 zone: 7672 pages used for memmap DMA32 zone: 491008 pages, LIFO batch:31 Normal zone: 520 pages used for memmap Normal zone: 33280 pages, LIFO batch:7 This commit was tested on a two node bare-metal NUMA machine and Linux as a numa guest on hyperv and qemu/kvm. PS: The wrong memory range reported by setup_node_data() seems to be harmless in the current kernel because it's just not used. However, that bad range is used in kernel 2.6.32 to initialize the old boot memory allocator, which causes a crash during boot. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Rientjes <rientjes@google.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-23 04:27:36 +08:00
if (start >= end)
continue;
/*
* Don't confuse VM with a node that doesn't have the
* minimum amount of memory:
*/
if (end && (end - start) < NODE_MIN_SIZE)
continue;
alloc_node_data(nid);
}
/* Dump memblock with node info and return. */
memblock_dump_all();
return 0;
}
/*
* There are unfortunately some poorly designed mainboards around that
* only connect memory to a single CPU. This breaks the 1:1 cpu->node
* mapping. To avoid this fill in the mapping for all possible CPUs,
* as the number of CPUs is not known yet. We round robin the existing
* nodes.
*/
static void __init numa_init_array(void)
{
int rr, i;
rr = first_node(node_online_map);
for (i = 0; i < nr_cpu_ids; i++) {
if (early_cpu_to_node(i) != NUMA_NO_NODE)
continue;
numa_set_node(i, rr);
rr = next_node_in(rr, node_online_map);
}
}
static int __init numa_init(int (*init_func)(void))
{
int i;
int ret;
for (i = 0; i < MAX_LOCAL_APIC; i++)
set_apicid_to_node(i, NUMA_NO_NODE);
x86, ACPI, mm: Revert movablemem_map support Tim found: WARNING: at arch/x86/kernel/smpboot.c:324 topology_sane.isra.2+0x6f/0x80() Hardware name: S2600CP sched: CPU #1's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency. smpboot: Booting Node 1, Processors #1 Modules linked in: Pid: 0, comm: swapper/1 Not tainted 3.9.0-0-generic #1 Call Trace: set_cpu_sibling_map+0x279/0x449 start_secondary+0x11d/0x1e5 Don Morris reproduced on a HP z620 workstation, and bisected it to commit e8d195525809 ("acpi, memory-hotplug: parse SRAT before memblock is ready") It turns out movable_map has some problems, and it breaks several things 1. numa_init is called several times, NOT just for srat. so those nodes_clear(numa_nodes_parsed) memset(&numa_meminfo, 0, sizeof(numa_meminfo)) can not be just removed. Need to consider sequence is: numaq, srat, amd, dummy. and make fall back path working. 2. simply split acpi_numa_init to early_parse_srat. a. that early_parse_srat is NOT called for ia64, so you break ia64. b. for (i = 0; i < MAX_LOCAL_APIC; i++) set_apicid_to_node(i, NUMA_NO_NODE) still left in numa_init. So it will just clear result from early_parse_srat. it should be moved before that.... c. it breaks ACPI_TABLE_OVERIDE...as the acpi table scan is moved early before override from INITRD is settled. 3. that patch TITLE is total misleading, there is NO x86 in the title, but it changes critical x86 code. It caused x86 guys did not pay attention to find the problem early. Those patches really should be routed via tip/x86/mm. 4. after that commit, following range can not use movable ram: a. real_mode code.... well..funny, legacy Node0 [0,1M) could be hot-removed? b. initrd... it will be freed after booting, so it could be on movable... c. crashkernel for kdump...: looks like we can not put kdump kernel above 4G anymore. d. init_mem_mapping: can not put page table high anymore. e. initmem_init: vmemmap can not be high local node anymore. That is not good. If node is hotplugable, the mem related range like page table and vmemmap could be on the that node without problem and should be on that node. We have workaround patch that could fix some problems, but some can not be fixed. So just remove that offending commit and related ones including: f7210e6c4ac7 ("mm/memblock.c: use CONFIG_HAVE_MEMBLOCK_NODE_MAP to protect movablecore_map in memblock_overlaps_region().") 01a178a94e8e ("acpi, memory-hotplug: support getting hotplug info from SRAT") 27168d38fa20 ("acpi, memory-hotplug: extend movablemem_map ranges to the end of node") e8d195525809 ("acpi, memory-hotplug: parse SRAT before memblock is ready") fb06bc8e5f42 ("page_alloc: bootmem limit with movablecore_map") 42f47e27e761 ("page_alloc: make movablemem_map have higher priority") 6981ec31146c ("page_alloc: introduce zone_movable_limit[] to keep movable limit for nodes") 34b71f1e04fc ("page_alloc: add movable_memmap kernel parameter") 4d59a75125d5 ("x86: get pg_data_t's memory from other node") Later we should have patches that will make sure kernel put page table and vmemmap on local node ram instead of push them down to node0. Also need to find way to put other kernel used ram to local node ram. Reported-by: Tim Gardner <tim.gardner@canonical.com> Reported-by: Don Morris <don.morris@hp.com> Bisected-by: Don Morris <don.morris@hp.com> Tested-by: Don Morris <don.morris@hp.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-02 06:51:27 +08:00
nodes_clear(numa_nodes_parsed);
nodes_clear(node_possible_map);
nodes_clear(node_online_map);
x86, ACPI, mm: Revert movablemem_map support Tim found: WARNING: at arch/x86/kernel/smpboot.c:324 topology_sane.isra.2+0x6f/0x80() Hardware name: S2600CP sched: CPU #1's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency. smpboot: Booting Node 1, Processors #1 Modules linked in: Pid: 0, comm: swapper/1 Not tainted 3.9.0-0-generic #1 Call Trace: set_cpu_sibling_map+0x279/0x449 start_secondary+0x11d/0x1e5 Don Morris reproduced on a HP z620 workstation, and bisected it to commit e8d195525809 ("acpi, memory-hotplug: parse SRAT before memblock is ready") It turns out movable_map has some problems, and it breaks several things 1. numa_init is called several times, NOT just for srat. so those nodes_clear(numa_nodes_parsed) memset(&numa_meminfo, 0, sizeof(numa_meminfo)) can not be just removed. Need to consider sequence is: numaq, srat, amd, dummy. and make fall back path working. 2. simply split acpi_numa_init to early_parse_srat. a. that early_parse_srat is NOT called for ia64, so you break ia64. b. for (i = 0; i < MAX_LOCAL_APIC; i++) set_apicid_to_node(i, NUMA_NO_NODE) still left in numa_init. So it will just clear result from early_parse_srat. it should be moved before that.... c. it breaks ACPI_TABLE_OVERIDE...as the acpi table scan is moved early before override from INITRD is settled. 3. that patch TITLE is total misleading, there is NO x86 in the title, but it changes critical x86 code. It caused x86 guys did not pay attention to find the problem early. Those patches really should be routed via tip/x86/mm. 4. after that commit, following range can not use movable ram: a. real_mode code.... well..funny, legacy Node0 [0,1M) could be hot-removed? b. initrd... it will be freed after booting, so it could be on movable... c. crashkernel for kdump...: looks like we can not put kdump kernel above 4G anymore. d. init_mem_mapping: can not put page table high anymore. e. initmem_init: vmemmap can not be high local node anymore. That is not good. If node is hotplugable, the mem related range like page table and vmemmap could be on the that node without problem and should be on that node. We have workaround patch that could fix some problems, but some can not be fixed. So just remove that offending commit and related ones including: f7210e6c4ac7 ("mm/memblock.c: use CONFIG_HAVE_MEMBLOCK_NODE_MAP to protect movablecore_map in memblock_overlaps_region().") 01a178a94e8e ("acpi, memory-hotplug: support getting hotplug info from SRAT") 27168d38fa20 ("acpi, memory-hotplug: extend movablemem_map ranges to the end of node") e8d195525809 ("acpi, memory-hotplug: parse SRAT before memblock is ready") fb06bc8e5f42 ("page_alloc: bootmem limit with movablecore_map") 42f47e27e761 ("page_alloc: make movablemem_map have higher priority") 6981ec31146c ("page_alloc: introduce zone_movable_limit[] to keep movable limit for nodes") 34b71f1e04fc ("page_alloc: add movable_memmap kernel parameter") 4d59a75125d5 ("x86: get pg_data_t's memory from other node") Later we should have patches that will make sure kernel put page table and vmemmap on local node ram instead of push them down to node0. Also need to find way to put other kernel used ram to local node ram. Reported-by: Tim Gardner <tim.gardner@canonical.com> Reported-by: Don Morris <don.morris@hp.com> Bisected-by: Don Morris <don.morris@hp.com> Tested-by: Don Morris <don.morris@hp.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-02 06:51:27 +08:00
memset(&numa_meminfo, 0, sizeof(numa_meminfo));
WARN_ON(memblock_set_node(0, ULLONG_MAX, &memblock.memory,
MAX_NUMNODES));
acpi, numa, mem_hotplug: mark all nodes the kernel resides un-hotpluggable At very early time, the kernel have to use some memory such as loading the kernel image. We cannot prevent this anyway. So any node the kernel resides in should be un-hotpluggable. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Liu Jiang <jiang.liu@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-22 07:49:32 +08:00
WARN_ON(memblock_set_node(0, ULLONG_MAX, &memblock.reserved,
MAX_NUMNODES));
acpi, numa, mem_hotplug: mark hotpluggable memory in memblock When parsing SRAT, we know that which memory area is hotpluggable. So we invoke function memblock_mark_hotplug() introduced by previous patch to mark hotpluggable memory in memblock. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Liu Jiang <jiang.liu@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-22 07:49:29 +08:00
/* In case that parsing SRAT failed. */
WARN_ON(memblock_clear_hotplug(0, ULLONG_MAX));
numa_reset_distance();
ret = init_func();
if (ret < 0)
return ret;
mem-hotplug: introduce movable_node boot option The hot-Pluggable field in SRAT specifies which memory is hotpluggable. As we mentioned before, if hotpluggable memory is used by the kernel, it cannot be hot-removed. So memory hotplug users may want to set all hotpluggable memory in ZONE_MOVABLE so that the kernel won't use it. Memory hotplug users may also set a node as movable node, which has ZONE_MOVABLE only, so that the whole node can be hot-removed. But the kernel cannot use memory in ZONE_MOVABLE. By doing this, the kernel cannot use memory in movable nodes. This will cause NUMA performance down. And other users may be unhappy. So we need a way to allow users to enable and disable this functionality. In this patch, we introduce movable_node boot option to allow users to choose to not to consume hotpluggable memory at early boot time and later we can set it as ZONE_MOVABLE. To achieve this, the movable_node boot option will control the memblock allocation direction. That said, after memblock is ready, before SRAT is parsed, we should allocate memory near the kernel image as we explained in the previous patches. So if movable_node boot option is set, the kernel does the following: 1. After memblock is ready, make memblock allocate memory bottom up. 2. After SRAT is parsed, make memblock behave as default, allocate memory top down. Users can specify "movable_node" in kernel commandline to enable this functionality. For those who don't use memory hotplug or who don't want to lose their NUMA performance, just don't specify anything. The kernel will work as before. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Suggested-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Suggested-by: Ingo Molnar <mingo@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 07:08:10 +08:00
/*
* We reset memblock back to the top-down direction
* here because if we configured ACPI_NUMA, we have
* parsed SRAT in init_func(). It is ok to have the
* reset here even if we did't configure ACPI_NUMA
* or acpi numa init fails and fallbacks to dummy
* numa init.
*/
memblock_set_bottom_up(false);
ret = numa_cleanup_meminfo(&numa_meminfo);
if (ret < 0)
return ret;
numa_emulation(&numa_meminfo, numa_distance_cnt);
ret = numa_register_memblks(&numa_meminfo);
if (ret < 0)
return ret;
for (i = 0; i < nr_cpu_ids; i++) {
int nid = early_cpu_to_node(i);
if (nid == NUMA_NO_NODE)
continue;
if (!node_online(nid))
numa_clear_node(i);
}
numa_init_array();
acpi, numa, mem_hotplug: mark all nodes the kernel resides un-hotpluggable At very early time, the kernel have to use some memory such as loading the kernel image. We cannot prevent this anyway. So any node the kernel resides in should be un-hotpluggable. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Liu Jiang <jiang.liu@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-22 07:49:32 +08:00
return 0;
}
/**
* dummy_numa_init - Fallback dummy NUMA init
*
* Used if there's no underlying NUMA architecture, NUMA initialization
* fails, or NUMA is disabled on the command line.
*
* Must online at least one node and add memory blocks that cover all
* allowed memory. This function must not fail.
*/
static int __init dummy_numa_init(void)
{
printk(KERN_INFO "%s\n",
numa_off ? "NUMA turned off" : "No NUMA configuration found");
printk(KERN_INFO "Faking a node at [mem %#018Lx-%#018Lx]\n",
0LLU, PFN_PHYS(max_pfn) - 1);
node_set(0, numa_nodes_parsed);
numa_add_memblk(0, 0, PFN_PHYS(max_pfn));
return 0;
}
/**
* x86_numa_init - Initialize NUMA
*
* Try each configured NUMA initialization method until one succeeds. The
* last fallback is dummy single node config encompassing whole memory and
* never fails.
*/
void __init x86_numa_init(void)
{
if (!numa_off) {
#ifdef CONFIG_ACPI_NUMA
if (!numa_init(x86_acpi_numa_init))
return;
#endif
#ifdef CONFIG_AMD_NUMA
if (!numa_init(amd_numa_init))
return;
#endif
}
numa_init(dummy_numa_init);
}
/*
* A node may exist which has one or more Generic Initiators but no CPUs and no
* memory.
*
* This function must be called after init_cpu_to_node(), to ensure that any
* memoryless CPU nodes have already been brought online, and before the
* node_data[nid] is needed for zone list setup in build_all_zonelists().
*
* When this function is called, any nodes containing either memory and/or CPUs
* will already be online and there is no need to do anything extra, even if
* they also contain one or more Generic Initiators.
*/
void __init init_gi_nodes(void)
{
int nid;
arch/x86/mm/numa: Do not initialize nodes twice On x86, prior to ("mm: handle uninitialized numa nodes gracecully"), NUMA nodes could be allocated at three different places. - numa_register_memblks - init_cpu_to_node - init_gi_nodes All these calls happen at setup_arch, and have the following order: setup_arch ... x86_numa_init numa_init numa_register_memblks ... init_cpu_to_node init_memory_less_node alloc_node_data free_area_init_memoryless_node init_gi_nodes init_memory_less_node alloc_node_data free_area_init_memoryless_node numa_register_memblks() is only interested in those nodes which have memory, so it skips over any memoryless node it founds. Later on, when we have read ACPI's SRAT table, we call init_cpu_to_node() and init_gi_nodes(), which initialize any memoryless node we might have that have either CPU or Initiator affinity, meaning we allocate pg_data_t struct for them and we mark them as ONLINE. So far so good, but the thing is that after ("mm: handle uninitialized numa nodes gracefully"), we allocate all possible NUMA nodes in free_area_init(), meaning we have a picture like the following: setup_arch x86_numa_init numa_init numa_register_memblks <-- allocate non-memoryless node x86_init.paging.pagetable_init ... free_area_init free_area_init_memoryless <-- allocate memoryless node init_cpu_to_node alloc_node_data <-- allocate memoryless node with CPU free_area_init_memoryless_node init_gi_nodes alloc_node_data <-- allocate memoryless node with Initiator free_area_init_memoryless_node free_area_init() already allocates all possible NUMA nodes, but init_cpu_to_node() and init_gi_nodes() are clueless about that, so they go ahead and allocate a new pg_data_t struct without checking anything, meaning we end up allocating twice. It should be mad clear that this only happens in the case where memoryless NUMA node happens to have a CPU/Initiator affinity. So get rid of init_memory_less_node() and just set the node online. Note that setting the node online is needed, otherwise we choke down the chain when bringup_nonboot_cpus() ends up calling __try_online_node()->register_one_node()->... and we blow up in bus_add_device(). As can be seen here: BUG: kernel NULL pointer dereference, address: 0000000000000060 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-rc4-1-default+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/4 RIP: 0010:bus_add_device+0x5a/0x140 Code: 8b 74 24 20 48 89 df e8 84 96 ff ff 85 c0 89 c5 75 38 48 8b 53 50 48 85 d2 0f 84 bb 00 004 RSP: 0000:ffffc9000022bd10 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888100987400 RCX: ffff8881003e4e19 RDX: ffff8881009a5e00 RSI: ffff888100987400 RDI: ffff888100987400 RBP: 0000000000000000 R08: ffff8881003e4e18 R09: ffff8881003e4c98 R10: 0000000000000000 R11: ffff888100402bc0 R12: ffffffff822ceba0 R13: 0000000000000000 R14: ffff888100987400 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88853fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000060 CR3: 000000000200a001 CR4: 00000000001706b0 Call Trace: device_add+0x4c0/0x910 __register_one_node+0x97/0x2d0 __try_online_node+0x85/0xc0 try_online_node+0x25/0x40 cpu_up+0x4f/0x100 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x79 kernel_init_freeable+0x130/0x2f1 kernel_init+0x17/0x150 ret_from_fork+0x22/0x30 The reason is simple, by the time bringup_nonboot_cpus() gets called, we did not register the node_subsys bus yet, so we crash when bus_add_device() tries to dereference bus()->p. The following shows the order of the calls: kernel_init_freeable smp_init bringup_nonboot_cpus ... bus_add_device() <- we did not register node_subsys yet do_basic_setup do_initcalls postcore_initcall(register_node_type); register_node_type subsys_system_register subsys_register bus_register <- register node_subsys bus Why setting the node online saves us then? Well, simply because __try_online_node() backs off when the node is online, meaning we do not end up calling register_one_node() in the first place. This is subtle, broken and deserves a deep analysis and thought about how to put this into shape, but for now let us have this easy fix for the leaking memory issue. [osalvador@suse.de: add comments] Link: https://lkml.kernel.org/r/20220221142649.3457-1-osalvador@suse.de Link: https://lkml.kernel.org/r/20220218224302.5282-2-osalvador@suse.de Fixes: da4490c958ad ("mm: handle uninitialized numa nodes gracefully") Signed-off-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Rafael Aquini <raquini@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Alexey Makhalov <amakhalov@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:43:51 +08:00
/*
* Exclude this node from
* bringup_nonboot_cpus
* cpu_up
* __try_online_node
* register_one_node
* because node_subsys is not initialized yet.
* TODO remove dependency on node_online
*/
for_each_node_state(nid, N_GENERIC_INITIATOR)
if (!node_online(nid))
arch/x86/mm/numa: Do not initialize nodes twice On x86, prior to ("mm: handle uninitialized numa nodes gracecully"), NUMA nodes could be allocated at three different places. - numa_register_memblks - init_cpu_to_node - init_gi_nodes All these calls happen at setup_arch, and have the following order: setup_arch ... x86_numa_init numa_init numa_register_memblks ... init_cpu_to_node init_memory_less_node alloc_node_data free_area_init_memoryless_node init_gi_nodes init_memory_less_node alloc_node_data free_area_init_memoryless_node numa_register_memblks() is only interested in those nodes which have memory, so it skips over any memoryless node it founds. Later on, when we have read ACPI's SRAT table, we call init_cpu_to_node() and init_gi_nodes(), which initialize any memoryless node we might have that have either CPU or Initiator affinity, meaning we allocate pg_data_t struct for them and we mark them as ONLINE. So far so good, but the thing is that after ("mm: handle uninitialized numa nodes gracefully"), we allocate all possible NUMA nodes in free_area_init(), meaning we have a picture like the following: setup_arch x86_numa_init numa_init numa_register_memblks <-- allocate non-memoryless node x86_init.paging.pagetable_init ... free_area_init free_area_init_memoryless <-- allocate memoryless node init_cpu_to_node alloc_node_data <-- allocate memoryless node with CPU free_area_init_memoryless_node init_gi_nodes alloc_node_data <-- allocate memoryless node with Initiator free_area_init_memoryless_node free_area_init() already allocates all possible NUMA nodes, but init_cpu_to_node() and init_gi_nodes() are clueless about that, so they go ahead and allocate a new pg_data_t struct without checking anything, meaning we end up allocating twice. It should be mad clear that this only happens in the case where memoryless NUMA node happens to have a CPU/Initiator affinity. So get rid of init_memory_less_node() and just set the node online. Note that setting the node online is needed, otherwise we choke down the chain when bringup_nonboot_cpus() ends up calling __try_online_node()->register_one_node()->... and we blow up in bus_add_device(). As can be seen here: BUG: kernel NULL pointer dereference, address: 0000000000000060 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-rc4-1-default+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/4 RIP: 0010:bus_add_device+0x5a/0x140 Code: 8b 74 24 20 48 89 df e8 84 96 ff ff 85 c0 89 c5 75 38 48 8b 53 50 48 85 d2 0f 84 bb 00 004 RSP: 0000:ffffc9000022bd10 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888100987400 RCX: ffff8881003e4e19 RDX: ffff8881009a5e00 RSI: ffff888100987400 RDI: ffff888100987400 RBP: 0000000000000000 R08: ffff8881003e4e18 R09: ffff8881003e4c98 R10: 0000000000000000 R11: ffff888100402bc0 R12: ffffffff822ceba0 R13: 0000000000000000 R14: ffff888100987400 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88853fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000060 CR3: 000000000200a001 CR4: 00000000001706b0 Call Trace: device_add+0x4c0/0x910 __register_one_node+0x97/0x2d0 __try_online_node+0x85/0xc0 try_online_node+0x25/0x40 cpu_up+0x4f/0x100 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x79 kernel_init_freeable+0x130/0x2f1 kernel_init+0x17/0x150 ret_from_fork+0x22/0x30 The reason is simple, by the time bringup_nonboot_cpus() gets called, we did not register the node_subsys bus yet, so we crash when bus_add_device() tries to dereference bus()->p. The following shows the order of the calls: kernel_init_freeable smp_init bringup_nonboot_cpus ... bus_add_device() <- we did not register node_subsys yet do_basic_setup do_initcalls postcore_initcall(register_node_type); register_node_type subsys_system_register subsys_register bus_register <- register node_subsys bus Why setting the node online saves us then? Well, simply because __try_online_node() backs off when the node is online, meaning we do not end up calling register_one_node() in the first place. This is subtle, broken and deserves a deep analysis and thought about how to put this into shape, but for now let us have this easy fix for the leaking memory issue. [osalvador@suse.de: add comments] Link: https://lkml.kernel.org/r/20220221142649.3457-1-osalvador@suse.de Link: https://lkml.kernel.org/r/20220218224302.5282-2-osalvador@suse.de Fixes: da4490c958ad ("mm: handle uninitialized numa nodes gracefully") Signed-off-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Rafael Aquini <raquini@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Alexey Makhalov <amakhalov@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:43:51 +08:00
node_set_online(nid);
}
/*
* Setup early cpu_to_node.
*
* Populate cpu_to_node[] only if x86_cpu_to_apicid[],
* and apicid_to_node[] tables have valid entries for a CPU.
* This means we skip cpu_to_node[] initialisation for NUMA
* emulation and faking node case (when running a kernel compiled
* for NUMA on a non NUMA box), which is OK as cpu_to_node[]
* is already initialized in a round robin manner at numa_init_array,
* prior to this call, and this initialization is good enough
* for the fake NUMA cases.
*
* Called before the per_cpu areas are setup.
*/
void __init init_cpu_to_node(void)
{
int cpu;
u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);
BUG_ON(cpu_to_apicid == NULL);
for_each_possible_cpu(cpu) {
int node = numa_cpu_node(cpu);
if (node == NUMA_NO_NODE)
continue;
x86/numa: Online memory-less nodes at boot time For now, x86 does not support memory-less node. A node without memory will not be onlined, and the cpus on it will be mapped to the other online nodes with memory in init_cpu_to_node(). The reason of doing this is to ensure each cpu has mapped to a node with memory, so that it will be able to allocate local memory for that cpu. But we don't have to do it in this way. In this series of patches, we are going to construct cpu <-> node mapping for all possible cpus at boot time, which is a persistent mapping. It means that the cpu will be mapped to the node which it belongs to, and will never be changed. If a node has only cpus but no memory, the cpus on it will be mapped to a memory-less node. And the memory-less node should be onlined. Allocate pgdats for all memory-less nodes and online them at boot time. Then build zonelists for these nodes. As a result, when cpus on these memory-less nodes try to allocate memory from local node, it will automatically fall back to the proper zones in the zonelists. Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: mika.j.penttila@gmail.com Cc: len.brown@intel.com Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: rafael@kernel.org Cc: rjw@rjwysocki.net Cc: yasu.isimatu@gmail.com Cc: linux-mm@kvack.org Cc: linux-acpi@vger.kernel.org Cc: isimatu.yasuaki@jp.fujitsu.com Cc: gongzhaogang@inspur.com Cc: tj@kernel.org Cc: izumi.taku@jp.fujitsu.com Cc: cl@linux.com Cc: chen.tang@easystack.cn Cc: akpm@linux-foundation.org Cc: kamezawa.hiroyu@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1472114120-3281-2-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-08-25 16:35:14 +08:00
arch/x86/mm/numa: Do not initialize nodes twice On x86, prior to ("mm: handle uninitialized numa nodes gracecully"), NUMA nodes could be allocated at three different places. - numa_register_memblks - init_cpu_to_node - init_gi_nodes All these calls happen at setup_arch, and have the following order: setup_arch ... x86_numa_init numa_init numa_register_memblks ... init_cpu_to_node init_memory_less_node alloc_node_data free_area_init_memoryless_node init_gi_nodes init_memory_less_node alloc_node_data free_area_init_memoryless_node numa_register_memblks() is only interested in those nodes which have memory, so it skips over any memoryless node it founds. Later on, when we have read ACPI's SRAT table, we call init_cpu_to_node() and init_gi_nodes(), which initialize any memoryless node we might have that have either CPU or Initiator affinity, meaning we allocate pg_data_t struct for them and we mark them as ONLINE. So far so good, but the thing is that after ("mm: handle uninitialized numa nodes gracefully"), we allocate all possible NUMA nodes in free_area_init(), meaning we have a picture like the following: setup_arch x86_numa_init numa_init numa_register_memblks <-- allocate non-memoryless node x86_init.paging.pagetable_init ... free_area_init free_area_init_memoryless <-- allocate memoryless node init_cpu_to_node alloc_node_data <-- allocate memoryless node with CPU free_area_init_memoryless_node init_gi_nodes alloc_node_data <-- allocate memoryless node with Initiator free_area_init_memoryless_node free_area_init() already allocates all possible NUMA nodes, but init_cpu_to_node() and init_gi_nodes() are clueless about that, so they go ahead and allocate a new pg_data_t struct without checking anything, meaning we end up allocating twice. It should be mad clear that this only happens in the case where memoryless NUMA node happens to have a CPU/Initiator affinity. So get rid of init_memory_less_node() and just set the node online. Note that setting the node online is needed, otherwise we choke down the chain when bringup_nonboot_cpus() ends up calling __try_online_node()->register_one_node()->... and we blow up in bus_add_device(). As can be seen here: BUG: kernel NULL pointer dereference, address: 0000000000000060 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-rc4-1-default+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/4 RIP: 0010:bus_add_device+0x5a/0x140 Code: 8b 74 24 20 48 89 df e8 84 96 ff ff 85 c0 89 c5 75 38 48 8b 53 50 48 85 d2 0f 84 bb 00 004 RSP: 0000:ffffc9000022bd10 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888100987400 RCX: ffff8881003e4e19 RDX: ffff8881009a5e00 RSI: ffff888100987400 RDI: ffff888100987400 RBP: 0000000000000000 R08: ffff8881003e4e18 R09: ffff8881003e4c98 R10: 0000000000000000 R11: ffff888100402bc0 R12: ffffffff822ceba0 R13: 0000000000000000 R14: ffff888100987400 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88853fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000060 CR3: 000000000200a001 CR4: 00000000001706b0 Call Trace: device_add+0x4c0/0x910 __register_one_node+0x97/0x2d0 __try_online_node+0x85/0xc0 try_online_node+0x25/0x40 cpu_up+0x4f/0x100 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x79 kernel_init_freeable+0x130/0x2f1 kernel_init+0x17/0x150 ret_from_fork+0x22/0x30 The reason is simple, by the time bringup_nonboot_cpus() gets called, we did not register the node_subsys bus yet, so we crash when bus_add_device() tries to dereference bus()->p. The following shows the order of the calls: kernel_init_freeable smp_init bringup_nonboot_cpus ... bus_add_device() <- we did not register node_subsys yet do_basic_setup do_initcalls postcore_initcall(register_node_type); register_node_type subsys_system_register subsys_register bus_register <- register node_subsys bus Why setting the node online saves us then? Well, simply because __try_online_node() backs off when the node is online, meaning we do not end up calling register_one_node() in the first place. This is subtle, broken and deserves a deep analysis and thought about how to put this into shape, but for now let us have this easy fix for the leaking memory issue. [osalvador@suse.de: add comments] Link: https://lkml.kernel.org/r/20220221142649.3457-1-osalvador@suse.de Link: https://lkml.kernel.org/r/20220218224302.5282-2-osalvador@suse.de Fixes: da4490c958ad ("mm: handle uninitialized numa nodes gracefully") Signed-off-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Rafael Aquini <raquini@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Alexey Makhalov <amakhalov@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:43:51 +08:00
/*
* Exclude this node from
* bringup_nonboot_cpus
* cpu_up
* __try_online_node
* register_one_node
* because node_subsys is not initialized yet.
* TODO remove dependency on node_online
*/
if (!node_online(node))
arch/x86/mm/numa: Do not initialize nodes twice On x86, prior to ("mm: handle uninitialized numa nodes gracecully"), NUMA nodes could be allocated at three different places. - numa_register_memblks - init_cpu_to_node - init_gi_nodes All these calls happen at setup_arch, and have the following order: setup_arch ... x86_numa_init numa_init numa_register_memblks ... init_cpu_to_node init_memory_less_node alloc_node_data free_area_init_memoryless_node init_gi_nodes init_memory_less_node alloc_node_data free_area_init_memoryless_node numa_register_memblks() is only interested in those nodes which have memory, so it skips over any memoryless node it founds. Later on, when we have read ACPI's SRAT table, we call init_cpu_to_node() and init_gi_nodes(), which initialize any memoryless node we might have that have either CPU or Initiator affinity, meaning we allocate pg_data_t struct for them and we mark them as ONLINE. So far so good, but the thing is that after ("mm: handle uninitialized numa nodes gracefully"), we allocate all possible NUMA nodes in free_area_init(), meaning we have a picture like the following: setup_arch x86_numa_init numa_init numa_register_memblks <-- allocate non-memoryless node x86_init.paging.pagetable_init ... free_area_init free_area_init_memoryless <-- allocate memoryless node init_cpu_to_node alloc_node_data <-- allocate memoryless node with CPU free_area_init_memoryless_node init_gi_nodes alloc_node_data <-- allocate memoryless node with Initiator free_area_init_memoryless_node free_area_init() already allocates all possible NUMA nodes, but init_cpu_to_node() and init_gi_nodes() are clueless about that, so they go ahead and allocate a new pg_data_t struct without checking anything, meaning we end up allocating twice. It should be mad clear that this only happens in the case where memoryless NUMA node happens to have a CPU/Initiator affinity. So get rid of init_memory_less_node() and just set the node online. Note that setting the node online is needed, otherwise we choke down the chain when bringup_nonboot_cpus() ends up calling __try_online_node()->register_one_node()->... and we blow up in bus_add_device(). As can be seen here: BUG: kernel NULL pointer dereference, address: 0000000000000060 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-rc4-1-default+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/4 RIP: 0010:bus_add_device+0x5a/0x140 Code: 8b 74 24 20 48 89 df e8 84 96 ff ff 85 c0 89 c5 75 38 48 8b 53 50 48 85 d2 0f 84 bb 00 004 RSP: 0000:ffffc9000022bd10 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888100987400 RCX: ffff8881003e4e19 RDX: ffff8881009a5e00 RSI: ffff888100987400 RDI: ffff888100987400 RBP: 0000000000000000 R08: ffff8881003e4e18 R09: ffff8881003e4c98 R10: 0000000000000000 R11: ffff888100402bc0 R12: ffffffff822ceba0 R13: 0000000000000000 R14: ffff888100987400 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88853fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000060 CR3: 000000000200a001 CR4: 00000000001706b0 Call Trace: device_add+0x4c0/0x910 __register_one_node+0x97/0x2d0 __try_online_node+0x85/0xc0 try_online_node+0x25/0x40 cpu_up+0x4f/0x100 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x79 kernel_init_freeable+0x130/0x2f1 kernel_init+0x17/0x150 ret_from_fork+0x22/0x30 The reason is simple, by the time bringup_nonboot_cpus() gets called, we did not register the node_subsys bus yet, so we crash when bus_add_device() tries to dereference bus()->p. The following shows the order of the calls: kernel_init_freeable smp_init bringup_nonboot_cpus ... bus_add_device() <- we did not register node_subsys yet do_basic_setup do_initcalls postcore_initcall(register_node_type); register_node_type subsys_system_register subsys_register bus_register <- register node_subsys bus Why setting the node online saves us then? Well, simply because __try_online_node() backs off when the node is online, meaning we do not end up calling register_one_node() in the first place. This is subtle, broken and deserves a deep analysis and thought about how to put this into shape, but for now let us have this easy fix for the leaking memory issue. [osalvador@suse.de: add comments] Link: https://lkml.kernel.org/r/20220221142649.3457-1-osalvador@suse.de Link: https://lkml.kernel.org/r/20220218224302.5282-2-osalvador@suse.de Fixes: da4490c958ad ("mm: handle uninitialized numa nodes gracefully") Signed-off-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Rafael Aquini <raquini@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Alexey Makhalov <amakhalov@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:43:51 +08:00
node_set_online(node);
x86/numa: Online memory-less nodes at boot time For now, x86 does not support memory-less node. A node without memory will not be onlined, and the cpus on it will be mapped to the other online nodes with memory in init_cpu_to_node(). The reason of doing this is to ensure each cpu has mapped to a node with memory, so that it will be able to allocate local memory for that cpu. But we don't have to do it in this way. In this series of patches, we are going to construct cpu <-> node mapping for all possible cpus at boot time, which is a persistent mapping. It means that the cpu will be mapped to the node which it belongs to, and will never be changed. If a node has only cpus but no memory, the cpus on it will be mapped to a memory-less node. And the memory-less node should be onlined. Allocate pgdats for all memory-less nodes and online them at boot time. Then build zonelists for these nodes. As a result, when cpus on these memory-less nodes try to allocate memory from local node, it will automatically fall back to the proper zones in the zonelists. Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: mika.j.penttila@gmail.com Cc: len.brown@intel.com Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: rafael@kernel.org Cc: rjw@rjwysocki.net Cc: yasu.isimatu@gmail.com Cc: linux-mm@kvack.org Cc: linux-acpi@vger.kernel.org Cc: isimatu.yasuaki@jp.fujitsu.com Cc: gongzhaogang@inspur.com Cc: tj@kernel.org Cc: izumi.taku@jp.fujitsu.com Cc: cl@linux.com Cc: chen.tang@easystack.cn Cc: akpm@linux-foundation.org Cc: kamezawa.hiroyu@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1472114120-3281-2-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-08-25 16:35:14 +08:00
numa_set_node(cpu, node);
}
}
#ifndef CONFIG_DEBUG_PER_CPU_MAPS
# ifndef CONFIG_NUMA_EMU
x86: delete __cpuinit usage from all x86 files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/x86 uses of the __cpuinit macros from all C files. x86 only had the one __CPUINIT used in assembly files, and it wasn't paired off with a .previous or a __FINIT, so we can delete it directly w/o any corresponding additional change there. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-19 06:23:59 +08:00
void numa_add_cpu(int cpu)
{
cpumask_set_cpu(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]);
}
x86: delete __cpuinit usage from all x86 files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/x86 uses of the __cpuinit macros from all C files. x86 only had the one __CPUINIT used in assembly files, and it wasn't paired off with a .previous or a __FINIT, so we can delete it directly w/o any corresponding additional change there. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-19 06:23:59 +08:00
void numa_remove_cpu(int cpu)
{
cpumask_clear_cpu(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]);
}
# endif /* !CONFIG_NUMA_EMU */
#else /* !CONFIG_DEBUG_PER_CPU_MAPS */
int __cpu_to_node(int cpu)
{
if (early_per_cpu_ptr(x86_cpu_to_node_map)) {
printk(KERN_WARNING
"cpu_to_node(%d): usage too early!\n", cpu);
dump_stack();
return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
}
return per_cpu(x86_cpu_to_node_map, cpu);
}
EXPORT_SYMBOL(__cpu_to_node);
/*
* Same function as cpu_to_node() but used if called before the
* per_cpu areas are setup.
*/
int early_cpu_to_node(int cpu)
{
if (early_per_cpu_ptr(x86_cpu_to_node_map))
return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
if (!cpu_possible(cpu)) {
printk(KERN_WARNING
"early_cpu_to_node(%d): no per_cpu area!\n", cpu);
dump_stack();
return NUMA_NO_NODE;
}
return per_cpu(x86_cpu_to_node_map, cpu);
}
void debug_cpumask_set_cpu(int cpu, int node, bool enable)
{
struct cpumask *mask;
if (node == NUMA_NO_NODE) {
/* early_cpu_to_node() already emits a warning and trace */
return;
}
mask = node_to_cpumask_map[node];
x86/numa: Use cpumask_available instead of hardcoded NULL check GCC-12 started triggering a new warning: arch/x86/mm/numa.c: In function ‘cpumask_of_node’: arch/x86/mm/numa.c:916:39: warning: the comparison will always evaluate as ‘false’ for the address of ‘node_to_cpumask_map’ will never be NULL [-Waddress] 916 | if (node_to_cpumask_map[node] == NULL) { | ^~ node_to_cpumask_map is of type cpumask_var_t[]. When CONFIG_CPUMASK_OFFSTACK is set, cpumask_var_t is typedef'd to a pointer for dynamic allocation, else to an array of one element. The "wicked game" can be checked on line 700 of include/linux/cpumask.h. The original code in debug_cpumask_set_cpu() and cpumask_of_node() were probably written by the original authors with CONFIG_CPUMASK_OFFSTACK=y (i.e. dynamic allocation) in mind, checking if the cpumask was available via a direct NULL check. When CONFIG_CPUMASK_OFFSTACK is not set, GCC gives the above warning while compiling the kernel. Fix that by using cpumask_available(), which does the NULL check when CONFIG_CPUMASK_OFFSTACK is set, otherwise returns true. Use it wherever such checks are made. Conditional definitions of cpumask_available() can be found along with the definition of cpumask_var_t. Check the cpumask.h reference mentioned above. Fixes: c032ef60d1aa ("cpumask: convert node_to_cpumask_map[] to cpumask_var_t") Fixes: de2d9445f162 ("x86: Unify node_to_cpumask_map handling between 32 and 64bit") Signed-off-by: Siddh Raman Pant <code@siddh.me> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20220731160913.632092-1-code@siddh.me
2022-08-01 00:09:13 +08:00
if (!cpumask_available(mask)) {
pr_err("node_to_cpumask_map[%i] NULL\n", node);
dump_stack();
return;
}
if (enable)
cpumask_set_cpu(cpu, mask);
else
cpumask_clear_cpu(cpu, mask);
printk(KERN_DEBUG "%s cpu %d node %d: mask now %*pbl\n",
enable ? "numa_add_cpu" : "numa_remove_cpu",
cpu, node, cpumask_pr_args(mask));
return;
}
# ifndef CONFIG_NUMA_EMU
x86: delete __cpuinit usage from all x86 files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/x86 uses of the __cpuinit macros from all C files. x86 only had the one __CPUINIT used in assembly files, and it wasn't paired off with a .previous or a __FINIT, so we can delete it directly w/o any corresponding additional change there. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-19 06:23:59 +08:00
static void numa_set_cpumask(int cpu, bool enable)
{
debug_cpumask_set_cpu(cpu, early_cpu_to_node(cpu), enable);
}
x86: delete __cpuinit usage from all x86 files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/x86 uses of the __cpuinit macros from all C files. x86 only had the one __CPUINIT used in assembly files, and it wasn't paired off with a .previous or a __FINIT, so we can delete it directly w/o any corresponding additional change there. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-19 06:23:59 +08:00
void numa_add_cpu(int cpu)
{
numa_set_cpumask(cpu, true);
}
x86: delete __cpuinit usage from all x86 files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/x86 uses of the __cpuinit macros from all C files. x86 only had the one __CPUINIT used in assembly files, and it wasn't paired off with a .previous or a __FINIT, so we can delete it directly w/o any corresponding additional change there. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-19 06:23:59 +08:00
void numa_remove_cpu(int cpu)
{
numa_set_cpumask(cpu, false);
}
# endif /* !CONFIG_NUMA_EMU */
/*
* Returns a pointer to the bitmask of CPUs on Node 'node'.
*/
const struct cpumask *cpumask_of_node(int node)
{
if ((unsigned)node >= nr_node_ids) {
printk(KERN_WARNING
"cpumask_of_node(%d): (unsigned)node >= nr_node_ids(%u)\n",
node, nr_node_ids);
dump_stack();
return cpu_none_mask;
}
x86/numa: Use cpumask_available instead of hardcoded NULL check GCC-12 started triggering a new warning: arch/x86/mm/numa.c: In function ‘cpumask_of_node’: arch/x86/mm/numa.c:916:39: warning: the comparison will always evaluate as ‘false’ for the address of ‘node_to_cpumask_map’ will never be NULL [-Waddress] 916 | if (node_to_cpumask_map[node] == NULL) { | ^~ node_to_cpumask_map is of type cpumask_var_t[]. When CONFIG_CPUMASK_OFFSTACK is set, cpumask_var_t is typedef'd to a pointer for dynamic allocation, else to an array of one element. The "wicked game" can be checked on line 700 of include/linux/cpumask.h. The original code in debug_cpumask_set_cpu() and cpumask_of_node() were probably written by the original authors with CONFIG_CPUMASK_OFFSTACK=y (i.e. dynamic allocation) in mind, checking if the cpumask was available via a direct NULL check. When CONFIG_CPUMASK_OFFSTACK is not set, GCC gives the above warning while compiling the kernel. Fix that by using cpumask_available(), which does the NULL check when CONFIG_CPUMASK_OFFSTACK is set, otherwise returns true. Use it wherever such checks are made. Conditional definitions of cpumask_available() can be found along with the definition of cpumask_var_t. Check the cpumask.h reference mentioned above. Fixes: c032ef60d1aa ("cpumask: convert node_to_cpumask_map[] to cpumask_var_t") Fixes: de2d9445f162 ("x86: Unify node_to_cpumask_map handling between 32 and 64bit") Signed-off-by: Siddh Raman Pant <code@siddh.me> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20220731160913.632092-1-code@siddh.me
2022-08-01 00:09:13 +08:00
if (!cpumask_available(node_to_cpumask_map[node])) {
printk(KERN_WARNING
"cpumask_of_node(%d): no node_to_cpumask_map!\n",
node);
dump_stack();
return cpu_online_mask;
}
return node_to_cpumask_map[node];
}
EXPORT_SYMBOL(cpumask_of_node);
#endif /* !CONFIG_DEBUG_PER_CPU_MAPS */
x86/NUMA: Provide a range-to-target_node lookup facility The DEV_DAX_KMEM facility is a generic mechanism to allow device-dax instances, fronting performance-differentiated-memory like pmem, to be added to the System RAM pool. The NUMA node for that hot-added memory is derived from the device-dax instance's 'target_node' attribute. Recall that the 'target_node' is the ACPI-PXM-to-node translation for memory when it comes online whereas the 'numa_node' attribute of the device represents the closest online cpu node. Presently useful target_node information from the ACPI SRAT is discarded with the expectation that "Reserved" memory will never be onlined. Now, DEV_DAX_KMEM violates that assumption, there is a need to retain the translation. Move, rather than discard, numa_memblk data to a secondary array that memory_add_physaddr_to_target_node() may consider at a later point in time. Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <x86@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/158188326978.894464.217282995221175417.stgit@dwillia2-desk3.amr.corp.intel.com
2020-02-17 04:01:09 +08:00
#ifdef CONFIG_NUMA_KEEP_MEMINFO
static int meminfo_to_nid(struct numa_meminfo *mi, u64 start)
{
int i;
for (i = 0; i < mi->nr_blks; i++)
if (mi->blk[i].start <= start && mi->blk[i].end > start)
x86/NUMA: Provide a range-to-target_node lookup facility The DEV_DAX_KMEM facility is a generic mechanism to allow device-dax instances, fronting performance-differentiated-memory like pmem, to be added to the System RAM pool. The NUMA node for that hot-added memory is derived from the device-dax instance's 'target_node' attribute. Recall that the 'target_node' is the ACPI-PXM-to-node translation for memory when it comes online whereas the 'numa_node' attribute of the device represents the closest online cpu node. Presently useful target_node information from the ACPI SRAT is discarded with the expectation that "Reserved" memory will never be onlined. Now, DEV_DAX_KMEM violates that assumption, there is a need to retain the translation. Move, rather than discard, numa_memblk data to a secondary array that memory_add_physaddr_to_target_node() may consider at a later point in time. Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <x86@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/158188326978.894464.217282995221175417.stgit@dwillia2-desk3.amr.corp.intel.com
2020-02-17 04:01:09 +08:00
return mi->blk[i].nid;
return NUMA_NO_NODE;
}
int phys_to_target_node(phys_addr_t start)
{
int nid = meminfo_to_nid(&numa_meminfo, start);
/*
* Prefer online nodes, but if reserved memory might be
* hot-added continue the search with reserved ranges.
*/
if (nid != NUMA_NO_NODE)
return nid;
return meminfo_to_nid(&numa_reserved_meminfo, start);
}
mm: fix phys_to_target_node() and memory_add_physaddr_to_nid() exports The core-mm has a default __weak implementation of phys_to_target_node() to mirror the weak definition of memory_add_physaddr_to_nid(). That symbol is exported for modules. However, while the export in mm/memory_hotplug.c exported the symbol in the configuration cases of: CONFIG_NUMA_KEEP_MEMINFO=y CONFIG_MEMORY_HOTPLUG=y ...and: CONFIG_NUMA_KEEP_MEMINFO=n CONFIG_MEMORY_HOTPLUG=y ...it failed to export the symbol in the case of: CONFIG_NUMA_KEEP_MEMINFO=y CONFIG_MEMORY_HOTPLUG=n Not only is that broken, but Christoph points out that the kernel should not be exporting any __weak symbol, which means that memory_add_physaddr_to_nid() example that phys_to_target_node() copied is broken too. Rework the definition of phys_to_target_node() and memory_add_physaddr_to_nid() to not require weak symbols. Move to the common arch override design-pattern of an asm header defining a symbol to replace the default implementation. The only common header that all memory_add_physaddr_to_nid() producing architectures implement is asm/sparsemem.h. In fact, powerpc already defines its memory_add_physaddr_to_nid() helper in sparsemem.h. Double-down on that observation and define phys_to_target_node() where necessary in asm/sparsemem.h. An alternate consideration that was discarded was to put this override in asm/numa.h, but that entangles with the definition of MAX_NUMNODES relative to the inclusion of linux/nodemask.h, and requires powerpc to grow a new header. The dependency on NUMA_KEEP_MEMINFO for DEV_DAX_HMEM_DEVICES is invalid now that the symbol is properly exported / stubbed in all combinations of CONFIG_NUMA_KEEP_MEMINFO and CONFIG_MEMORY_HOTPLUG. [dan.j.williams@intel.com: v4] Link: https://lkml.kernel.org/r/160461461867.1505359.5301571728749534585.stgit@dwillia2-desk3.amr.corp.intel.com [dan.j.williams@intel.com: powerpc: fix create_section_mapping compile warning] Link: https://lkml.kernel.org/r/160558386174.2948926.2740149041249041764.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: a035b6bf863e ("mm/memory_hotplug: introduce default phys_to_target_node() implementation") Reported-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lkml.kernel.org/r/160447639846.1133764.7044090803980177548.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 14:17:05 +08:00
EXPORT_SYMBOL_GPL(phys_to_target_node);
x86/NUMA: Provide a range-to-target_node lookup facility The DEV_DAX_KMEM facility is a generic mechanism to allow device-dax instances, fronting performance-differentiated-memory like pmem, to be added to the System RAM pool. The NUMA node for that hot-added memory is derived from the device-dax instance's 'target_node' attribute. Recall that the 'target_node' is the ACPI-PXM-to-node translation for memory when it comes online whereas the 'numa_node' attribute of the device represents the closest online cpu node. Presently useful target_node information from the ACPI SRAT is discarded with the expectation that "Reserved" memory will never be onlined. Now, DEV_DAX_KMEM violates that assumption, there is a need to retain the translation. Move, rather than discard, numa_memblk data to a secondary array that memory_add_physaddr_to_target_node() may consider at a later point in time. Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <x86@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/158188326978.894464.217282995221175417.stgit@dwillia2-desk3.amr.corp.intel.com
2020-02-17 04:01:09 +08:00
int memory_add_physaddr_to_nid(u64 start)
{
int nid = meminfo_to_nid(&numa_meminfo, start);
if (nid == NUMA_NO_NODE)
nid = numa_meminfo.blk[0].nid;
return nid;
}
mm: fix phys_to_target_node() and memory_add_physaddr_to_nid() exports The core-mm has a default __weak implementation of phys_to_target_node() to mirror the weak definition of memory_add_physaddr_to_nid(). That symbol is exported for modules. However, while the export in mm/memory_hotplug.c exported the symbol in the configuration cases of: CONFIG_NUMA_KEEP_MEMINFO=y CONFIG_MEMORY_HOTPLUG=y ...and: CONFIG_NUMA_KEEP_MEMINFO=n CONFIG_MEMORY_HOTPLUG=y ...it failed to export the symbol in the case of: CONFIG_NUMA_KEEP_MEMINFO=y CONFIG_MEMORY_HOTPLUG=n Not only is that broken, but Christoph points out that the kernel should not be exporting any __weak symbol, which means that memory_add_physaddr_to_nid() example that phys_to_target_node() copied is broken too. Rework the definition of phys_to_target_node() and memory_add_physaddr_to_nid() to not require weak symbols. Move to the common arch override design-pattern of an asm header defining a symbol to replace the default implementation. The only common header that all memory_add_physaddr_to_nid() producing architectures implement is asm/sparsemem.h. In fact, powerpc already defines its memory_add_physaddr_to_nid() helper in sparsemem.h. Double-down on that observation and define phys_to_target_node() where necessary in asm/sparsemem.h. An alternate consideration that was discarded was to put this override in asm/numa.h, but that entangles with the definition of MAX_NUMNODES relative to the inclusion of linux/nodemask.h, and requires powerpc to grow a new header. The dependency on NUMA_KEEP_MEMINFO for DEV_DAX_HMEM_DEVICES is invalid now that the symbol is properly exported / stubbed in all combinations of CONFIG_NUMA_KEEP_MEMINFO and CONFIG_MEMORY_HOTPLUG. [dan.j.williams@intel.com: v4] Link: https://lkml.kernel.org/r/160461461867.1505359.5301571728749534585.stgit@dwillia2-desk3.amr.corp.intel.com [dan.j.williams@intel.com: powerpc: fix create_section_mapping compile warning] Link: https://lkml.kernel.org/r/160558386174.2948926.2740149041249041764.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: a035b6bf863e ("mm/memory_hotplug: introduce default phys_to_target_node() implementation") Reported-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lkml.kernel.org/r/160447639846.1133764.7044090803980177548.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 14:17:05 +08:00
EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
#endif