UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm/mach-kirkwood/Kconfig

119 lines
2.9 KiB
Plaintext
Raw Normal View History

[ARM] add Marvell Kirkwood (88F6000) SoC support The Marvell Kirkwood (88F6000) is a family of ARM SoCs based on a Shiva CPU core, and features a DDR2 controller, a x1 PCIe interface, a USB 2.0 interface, a SPI controller, a crypto accelerator, a TS interface, and IDMA/XOR engines, and depending on the model, also features one or two Gigabit Ethernet interfaces, two SATA II interfaces, one or two TWSI interfaces, one or two UARTs, a TDM/SLIC interface, a NAND controller, an I2S/SPDIF interface, and an SDIO interface. This patch adds supports for the Marvell DB-88F6281-BP Development Board and the RD-88F6192-NAS and the RD-88F6281 Reference Designs, enabling support for the PCIe interface, the USB interface, the ethernet interfaces, the SATA interfaces, the TWSI interfaces, the UARTs, and the NAND controller. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-23 04:45:06 +08:00
if ARCH_KIRKWOOD
menu "Marvell Kirkwood Implementations"
ARM: kirkwood: convert to DT irqchip and clocksource With recent support for true irqchip and clocksource drivers for Orion SoCs, now make use of it on DT enabled Kirkwood boards. This also introduces a new Kconfig option for legacy (non-DT) Kirkwood where old code is moved out to and polishes DT board file a little bit. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-02 21:15:07 +08:00
config KIRKWOOD_LEGACY
bool
ARM: Kirkwood: sort board entries by ASCII-code order This patch sorts board entries in files Kconfig, Makefile and kirkwood_defconfig by ASCII-code order. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-09 06:41:27 +08:00
config MACH_D2NET_V2
bool "LaCie d2 Network v2 NAS Board"
ARM: kirkwood: convert to DT irqchip and clocksource With recent support for true irqchip and clocksource drivers for Orion SoCs, now make use of it on DT enabled Kirkwood boards. This also introduces a new Kconfig option for legacy (non-DT) Kirkwood where old code is moved out to and polishes DT board file a little bit. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-02 21:15:07 +08:00
select KIRKWOOD_LEGACY
ARM: Kirkwood: sort board entries by ASCII-code order This patch sorts board entries in files Kconfig, Makefile and kirkwood_defconfig by ASCII-code order. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-09 06:41:27 +08:00
help
Say 'Y' here if you want your kernel to support the
LaCie d2 Network v2 NAS.
config MACH_NET2BIG_V2
bool "LaCie 2Big Network v2 NAS Board"
ARM: kirkwood: convert to DT irqchip and clocksource With recent support for true irqchip and clocksource drivers for Orion SoCs, now make use of it on DT enabled Kirkwood boards. This also introduces a new Kconfig option for legacy (non-DT) Kirkwood where old code is moved out to and polishes DT board file a little bit. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-02 21:15:07 +08:00
select KIRKWOOD_LEGACY
ARM: Kirkwood: sort board entries by ASCII-code order This patch sorts board entries in files Kconfig, Makefile and kirkwood_defconfig by ASCII-code order. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-09 06:41:27 +08:00
help
Say 'Y' here if you want your kernel to support the
LaCie 2Big Network v2 NAS.
config MACH_NET5BIG_V2
bool "LaCie 5Big Network v2 NAS Board"
ARM: kirkwood: convert to DT irqchip and clocksource With recent support for true irqchip and clocksource drivers for Orion SoCs, now make use of it on DT enabled Kirkwood boards. This also introduces a new Kconfig option for legacy (non-DT) Kirkwood where old code is moved out to and polishes DT board file a little bit. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-02 21:15:07 +08:00
select KIRKWOOD_LEGACY
ARM: Kirkwood: sort board entries by ASCII-code order This patch sorts board entries in files Kconfig, Makefile and kirkwood_defconfig by ASCII-code order. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-09 06:41:27 +08:00
help
Say 'Y' here if you want your kernel to support the
LaCie 5Big Network v2 NAS.
config MACH_OPENRD
ARM: kirkwood: convert to DT irqchip and clocksource With recent support for true irqchip and clocksource drivers for Orion SoCs, now make use of it on DT enabled Kirkwood boards. This also introduces a new Kconfig option for legacy (non-DT) Kirkwood where old code is moved out to and polishes DT board file a little bit. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-02 21:15:07 +08:00
select KIRKWOOD_LEGACY
ARM: Kirkwood: sort board entries by ASCII-code order This patch sorts board entries in files Kconfig, Makefile and kirkwood_defconfig by ASCII-code order. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-09 06:41:27 +08:00
bool
config MACH_OPENRD_BASE
bool "Marvell OpenRD Base Board"
select MACH_OPENRD
help
Say 'Y' here if you want your kernel to support the
Marvell OpenRD Base Board.
config MACH_OPENRD_CLIENT
bool "Marvell OpenRD Client Board"
select MACH_OPENRD
help
Say 'Y' here if you want your kernel to support the
Marvell OpenRD Client Board.
config MACH_OPENRD_ULTIMATE
bool "Marvell OpenRD Ultimate Board"
select MACH_OPENRD
help
Say 'Y' here if you want your kernel to support the
Marvell OpenRD Ultimate Board.
config MACH_RD88F6192_NAS
bool "Marvell RD-88F6192-NAS Reference Board"
ARM: kirkwood: convert to DT irqchip and clocksource With recent support for true irqchip and clocksource drivers for Orion SoCs, now make use of it on DT enabled Kirkwood boards. This also introduces a new Kconfig option for legacy (non-DT) Kirkwood where old code is moved out to and polishes DT board file a little bit. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-02 21:15:07 +08:00
select KIRKWOOD_LEGACY
ARM: Kirkwood: sort board entries by ASCII-code order This patch sorts board entries in files Kconfig, Makefile and kirkwood_defconfig by ASCII-code order. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-09 06:41:27 +08:00
help
Say 'Y' here if you want your kernel to support the
Marvell RD-88F6192-NAS Reference Board.
config MACH_RD88F6281
bool "Marvell RD-88F6281 Reference Board"
ARM: kirkwood: convert to DT irqchip and clocksource With recent support for true irqchip and clocksource drivers for Orion SoCs, now make use of it on DT enabled Kirkwood boards. This also introduces a new Kconfig option for legacy (non-DT) Kirkwood where old code is moved out to and polishes DT board file a little bit. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-02 21:15:07 +08:00
select KIRKWOOD_LEGACY
ARM: Kirkwood: sort board entries by ASCII-code order This patch sorts board entries in files Kconfig, Makefile and kirkwood_defconfig by ASCII-code order. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-09 06:41:27 +08:00
help
Say 'Y' here if you want your kernel to support the
Marvell RD-88F6281 Reference Board.
config MACH_T5325
bool "HP t5325 Thin Client"
ARM: kirkwood: convert to DT irqchip and clocksource With recent support for true irqchip and clocksource drivers for Orion SoCs, now make use of it on DT enabled Kirkwood boards. This also introduces a new Kconfig option for legacy (non-DT) Kirkwood where old code is moved out to and polishes DT board file a little bit. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-02 21:15:07 +08:00
select KIRKWOOD_LEGACY
[ARM] eSATA SheevaPlug basic board support Allow basic eSATA SheevaPlug board configuration and build. Signed-off-by: John Holland <john.holland@cellent-fs.de> Signed-off-by: Nicolas Pitre <nico@marvell.com> --
2010-02-20 06:10:58 +08:00
help
Say 'Y' here if you want your kernel to support the
ARM: Kirkwood: sort board entries by ASCII-code order This patch sorts board entries in files Kconfig, Makefile and kirkwood_defconfig by ASCII-code order. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-09 06:41:27 +08:00
HP t5325 Thin Client.
[ARM] eSATA SheevaPlug basic board support Allow basic eSATA SheevaPlug board configuration and build. Signed-off-by: John Holland <john.holland@cellent-fs.de> Signed-off-by: Nicolas Pitre <nico@marvell.com> --
2010-02-20 06:10:58 +08:00
ARM: Kirkwood: sort board entries by ASCII-code order This patch sorts board entries in files Kconfig, Makefile and kirkwood_defconfig by ASCII-code order. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-09 06:41:27 +08:00
config MACH_TS219
bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
ARM: kirkwood: convert to DT irqchip and clocksource With recent support for true irqchip and clocksource drivers for Orion SoCs, now make use of it on DT enabled Kirkwood boards. This also introduces a new Kconfig option for legacy (non-DT) Kirkwood where old code is moved out to and polishes DT board file a little bit. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-02 21:15:07 +08:00
select KIRKWOOD_LEGACY
[ARM] Kirkwood: Marvell GuruPlug support GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0 GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot References: http://www.globalscaletechnologies.com/t-guruplugdetails.aspx http://plugcomputer.org This patch is for GuruPlug Plus, but it supports Standard version as well. Signed-off-by: Siddarth Gore <gores@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-03-22 17:28:20 +08:00
help
Say 'Y' here if you want your kernel to support the
ARM: Kirkwood: sort board entries by ASCII-code order This patch sorts board entries in files Kconfig, Makefile and kirkwood_defconfig by ASCII-code order. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-09 06:41:27 +08:00
QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
TS-219P+ Turbo NAS devices.
config MACH_TS41X
bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS"
ARM: kirkwood: convert to DT irqchip and clocksource With recent support for true irqchip and clocksource drivers for Orion SoCs, now make use of it on DT enabled Kirkwood boards. This also introduces a new Kconfig option for legacy (non-DT) Kirkwood where old code is moved out to and polishes DT board file a little bit. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-02 21:15:07 +08:00
select KIRKWOOD_LEGACY
ARM: Kirkwood: sort board entries by ASCII-code order This patch sorts board entries in files Kconfig, Makefile and kirkwood_defconfig by ASCII-code order. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-09 06:41:27 +08:00
help
Say 'Y' here if you want your kernel to support the
QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo
NAS devices.
comment "Device tree entries"
[ARM] Kirkwood: Marvell GuruPlug support GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0 GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot References: http://www.globalscaletechnologies.com/t-guruplugdetails.aspx http://plugcomputer.org This patch is for GuruPlug Plus, but it supports Standard version as well. Signed-off-by: Siddarth Gore <gores@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-03-22 17:28:20 +08:00
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
config ARCH_KIRKWOOD_DT
bool "Marvell Kirkwood Flattened Device Tree"
ARM: kirkwood: move DT boards to SoC-centric clock init SoC centric clock init for Kirkwood can be used by calling of_clk_init. Use it and get rid of mvebu_clocks_init. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-11 09:08:08 +08:00
select KIRKWOOD_CLK
ARM: kirkwood: fix DT building and update defconfig commit 844703c ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code removed the last kirkwood DT/platform board in kirkwood_defconfig, this triggered a rescan of the config symbols, the result of which breaks the build because KIRKWOOD_DT does not select OF_IRQ. This commit fixes the regression and updates the defconfig to explicitly enable SERIAL_OF_PLATFORM and KIRWOOD_DT. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-13 02:05:30 +08:00
select OF_IRQ
ARM: kirkwood: convert to DT irqchip and clocksource With recent support for true irqchip and clocksource drivers for Orion SoCs, now make use of it on DT enabled Kirkwood boards. This also introduces a new Kconfig option for legacy (non-DT) Kirkwood where old code is moved out to and polishes DT board file a little bit. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-02 21:15:07 +08:00
select ORION_IRQCHIP
select ORION_TIMER
ARM: Kirkwood: Convert DNSKW to use gpio-poweroff. Also enable the gpio-poweroff driver when DT is used. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-17 16:51:05 +08:00
select POWER_SUPPLY
select POWER_RESET
select POWER_RESET_GPIO
ARM: Kirkwood: Enable regulator and fixed regulators. A few boards use a GPIO line to enable power to subsystems, eg USB or SATA devices. Pull in the regulator framework as the first step to controlling these GPIO lines are regulators. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-17 22:46:10 +08:00
select REGULATOR
select REGULATOR_FIXED_VOLTAGE
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
select USE_OF
help
Say 'Y' here if you want your kernel to support the
Marvell Kirkwood using flattened device tree.
ARM: kirkwood: convert the mv88f6281gtw_ge board to DT This commit converts the mv88f6281gtw_ge Kirkwood board to use a Device Tree representation, except for the Ethernet devices and the DSA switch. Even though the mv643xx_eth driver has a DT binding, converting this board to use it is for now left on the side because it doesn't use a simple PHY, but a DSA switch instead. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-01 23:07:32 +08:00
config MACH_MV88F6281GTW_GE_DT
bool "Marvell 88F6281 GTW GE Board (Flattened Device Tree)"
ARM: kirkwood: fix DT building and update defconfig commit 844703c ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code removed the last kirkwood DT/platform board in kirkwood_defconfig, this triggered a rescan of the config symbols, the result of which breaks the build because KIRKWOOD_DT does not select OF_IRQ. This commit fixes the regression and updates the defconfig to explicitly enable SERIAL_OF_PLATFORM and KIRWOOD_DT. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-13 02:05:30 +08:00
depends on ARCH_KIRKWOOD_DT
ARM: kirkwood: convert the mv88f6281gtw_ge board to DT This commit converts the mv88f6281gtw_ge Kirkwood board to use a Device Tree representation, except for the Ethernet devices and the DSA switch. Even though the mv643xx_eth driver has a DT binding, converting this board to use it is for now left on the side because it doesn't use a simple PHY, but a DSA switch instead. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-01 23:07:32 +08:00
help
Say 'Y' here if you want your kernel to support the
Marvell 88F6281 GTW GE Board (Flattened Device Tree).
[ARM] add Marvell Kirkwood (88F6000) SoC support The Marvell Kirkwood (88F6000) is a family of ARM SoCs based on a Shiva CPU core, and features a DDR2 controller, a x1 PCIe interface, a USB 2.0 interface, a SPI controller, a crypto accelerator, a TS interface, and IDMA/XOR engines, and depending on the model, also features one or two Gigabit Ethernet interfaces, two SATA II interfaces, one or two TWSI interfaces, one or two UARTs, a TDM/SLIC interface, a NAND controller, an I2S/SPDIF interface, and an SDIO interface. This patch adds supports for the Marvell DB-88F6281-BP Development Board and the RD-88F6192-NAS and the RD-88F6281 Reference Designs, enabling support for the PCIe interface, the USB interface, the ethernet interfaces, the SATA interfaces, the TWSI interfaces, the UARTs, and the NAND controller. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-23 04:45:06 +08:00
endmenu
endif