UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm/mm/context.c

254 lines
6.6 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
[ARM] Move mmu.c out of the way Rename mmu.c to context.c - it's the ARMv6 ASID context handling code rather than generic "mmu" handling code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-22 02:23:38 +08:00
* linux/arch/arm/mm/context.c
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
* Copyright (C) 2002-2003 Deep Blue Solutions Ltd, all rights reserved.
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
* Copyright (C) 2012 ARM Limited
*
* Author: Will Deacon <will.deacon@arm.com>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/mm.h>
ARM: 5905/1: ARM: Global ASID allocation on SMP The current ASID allocation algorithm doesn't ensure the notification of the other CPUs when the ASID rolls over. This may lead to two processes using the same ASID (but different generation) or multiple threads of the same process using different ASIDs. This patch adds the broadcasting of the ASID rollover event to the other CPUs. To avoid a race on multiple CPUs modifying "cpu_last_asid" during the handling of the broadcast, the ASID numbering now starts at "smp_processor_id() + 1". At rollover, the cpu_last_asid will be set to NR_CPUS. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-27 02:09:42 +08:00
#include <linux/smp.h>
#include <linux/percpu.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/mmu_context.h>
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
#include <asm/smp_plat.h>
ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process This patch introduces a new Kconfig option which, when enabled, causes the kernel to write the PID of the current task into the PROCID field of the CONTEXTIDR on context switch. This is useful when analysing hardware trace, since writes to this register can be configured to emit an event into the trace stream. The thread notifier for writing the PID is deliberately kept separate from the ASID-writing code so that we can support newer processors using LPAE, where the ASID is stored in TTBR0. As such, the switch_mm code is updated to perform a read-modify-write sequence to ensure that we don't clobber the PID on CPUs using the classic 2-level page tables. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-06 22:43:03 +08:00
#include <asm/thread_notify.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/tlbflush.h>
ARM: LPAE: use 64-bit accessors for TTBR registers This patch adds TTBR accessor macros, and modifies cpu_get_pgd() and the LPAE version of cpu_set_reserved_ttbr0() to use these instead. In the process, we also fix these functions to correctly handle cases where the physical address lies beyond the 4G limit of 32-bit addressing. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Acked-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Subash Patel <subash.rp@samsung.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-07-17 05:20:17 +08:00
#include <asm/proc-fns.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
/*
* On ARMv6, we have the following structure in the Context ID:
*
* 31 7 0
* +-------------------------+-----------+
* | process ID | ASID |
* +-------------------------+-----------+
* | context ID |
* +-------------------------------------+
*
* The ASID is used to tag entries in the CPU caches and TLBs.
* The context ID is used by debuggers and trace logic, and
* should be unique within all running processes.
ARM: 7649/1: mm: mm->context.id fix for big-endian Since the new ASID code in b5466f8728527a05a493cc4abe9e6f034a1bbaab ("ARM: mm: remove IPI broadcasting on ASID rollover") was changed to use 64bit operations it has broken the BE operation due to an issue with the MM code accessing sub-fields of mm->context.id. When running in BE mode we see the values in mm->context.id are stored with the highest value first, so the LDR in the arch/arm/mm/proc-macros.S reads the wrong part of this field. To resolve this, change the LDR in the mmid macro to load from +4. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-11 19:25:06 +08:00
*
* In big endian operation, the two 32 bit words are swapped if accesed by
* non 64-bit operations.
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
*/
#define ASID_FIRST_VERSION (1ULL << ASID_BITS)
ARM: 7768/1: prevent risks of out-of-bound access in ASID allocator On a CPU that never ran anything, both the active and reserved ASID fields are set to zero. In this case the ASID_TO_IDX() macro will return -1, which is not a very useful value to index a bitmap. Instead of trying to offset the ASID so that ASID #1 is actually bit 0 in the asid_map bitmap, just always ignore bit 0 and start the search from bit 1. This makes the code a bit more readable, and without risk of OoB access. Cc: <stable@vger.kernel.org> # 3.9 Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-21 19:06:55 +08:00
#define NUM_USER_ASIDS ASID_FIRST_VERSION
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
locking, ARM: Annotate low level hw locks as raw Annotate the low level hardware locks which must not be preempted. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-03 21:44:46 +08:00
static DEFINE_RAW_SPINLOCK(cpu_asid_lock);
ARM: mm: use bitmap operations when allocating new ASIDs When allocating a new ASID, we must take care not to re-assign a reserved ASID-value to a new mm. This requires us to check each candidate ASID against those currently reserved by other cores before assigning a new ASID to the current mm. This patch improves the ASID allocation algorithm by using a bitmap-based approach. Rather than iterating over the reserved ASID array for each candidate ASID, we simply find the first zero bit, ensuring that those indices corresponding to reserved ASIDs are set when flushing during a rollover event. Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-01 21:57:49 +08:00
static atomic64_t asid_generation = ATOMIC64_INIT(ASID_FIRST_VERSION);
static DECLARE_BITMAP(asid_map, NUM_USER_ASIDS);
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
ARM: 7769/1: Cortex-A15: fix erratum 798181 implementation Looking into the active_asids array is not enough, as we also need to look into the reserved_asids array (they both represent processes that are currently running). Also, not holding the ASID allocator lock is racy, as another CPU could schedule that process and trigger a rollover, making the erratum workaround miss an IPI. Exposing this outside of context.c is a little ugly on the side, so let's define a new entry point that the erratum workaround can call to obtain the cpumask. Cc: <stable@vger.kernel.org> # 3.9 Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-21 19:07:27 +08:00
static DEFINE_PER_CPU(atomic64_t, active_asids);
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
static DEFINE_PER_CPU(u64, reserved_asids);
static cpumask_t tlb_flush_pending;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ARM: 7769/1: Cortex-A15: fix erratum 798181 implementation Looking into the active_asids array is not enough, as we also need to look into the reserved_asids array (they both represent processes that are currently running). Also, not holding the ASID allocator lock is racy, as another CPU could schedule that process and trigger a rollover, making the erratum workaround miss an IPI. Exposing this outside of context.c is a little ugly on the side, so let's define a new entry point that the erratum workaround can call to obtain the cpumask. Cc: <stable@vger.kernel.org> # 3.9 Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-21 19:07:27 +08:00
#ifdef CONFIG_ARM_ERRATA_798181
void a15_erratum_get_cpumask(int this_cpu, struct mm_struct *mm,
cpumask_t *mask)
{
int cpu;
unsigned long flags;
u64 context_id, asid;
raw_spin_lock_irqsave(&cpu_asid_lock, flags);
context_id = mm->context.id.counter;
for_each_online_cpu(cpu) {
if (cpu == this_cpu)
continue;
/*
* We only need to send an IPI if the other CPUs are
* running the same ASID as the one being invalidated.
*/
asid = per_cpu(active_asids, cpu).counter;
if (asid == 0)
asid = per_cpu(reserved_asids, cpu);
if (context_id == asid)
cpumask_set_cpu(cpu, mask);
}
raw_spin_unlock_irqrestore(&cpu_asid_lock, flags);
}
#endif
ARM: LPAE: Add context switching support With LPAE, TTBRx registers are 64-bit. The ASID is stored in TTBR0 rather than a separate Context ID register. This patch makes the necessary changes to handle context switching on LPAE. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-11-23 01:30:31 +08:00
#ifdef CONFIG_ARM_LPAE
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
static void cpu_set_reserved_ttbr0(void)
ARM: Use TTBR1 instead of reserved context ID On ARMv7 CPUs that cache first level page table entries (like the Cortex-A15), using a reserved ASID while changing the TTBR or flushing the TLB is unsafe. This is because the CPU may cache the first level entry as the result of a speculative memory access while the reserved ASID is assigned. After the process owning the page tables dies, the memory will be reallocated and may be written with junk values which can be interpreted as global, valid PTEs by the processor. This will result in the TLB being populated with bogus global entries. This patch avoids the use of a reserved context ID in the v7 switch_mm and ASID rollover code by temporarily using the swapper_pg_dir pointed at by TTBR1, which contains only global entries that are not tagged with ASIDs. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Tested-by: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> [catalin.marinas@arm.com: add LPAE support] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-05-31 22:38:43 +08:00
{
/*
* Set TTBR0 to swapper_pg_dir which contains only global entries. The
* ASID is set to 0.
*/
ARM: LPAE: use 64-bit accessors for TTBR registers This patch adds TTBR accessor macros, and modifies cpu_get_pgd() and the LPAE version of cpu_set_reserved_ttbr0() to use these instead. In the process, we also fix these functions to correctly handle cases where the physical address lies beyond the 4G limit of 32-bit addressing. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Acked-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Subash Patel <subash.rp@samsung.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-07-17 05:20:17 +08:00
cpu_set_ttbr(0, __pa(swapper_pg_dir));
ARM: Use TTBR1 instead of reserved context ID On ARMv7 CPUs that cache first level page table entries (like the Cortex-A15), using a reserved ASID while changing the TTBR or flushing the TLB is unsafe. This is because the CPU may cache the first level entry as the result of a speculative memory access while the reserved ASID is assigned. After the process owning the page tables dies, the memory will be reallocated and may be written with junk values which can be interpreted as global, valid PTEs by the processor. This will result in the TLB being populated with bogus global entries. This patch avoids the use of a reserved context ID in the v7 switch_mm and ASID rollover code by temporarily using the swapper_pg_dir pointed at by TTBR1, which contains only global entries that are not tagged with ASIDs. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Tested-by: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> [catalin.marinas@arm.com: add LPAE support] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-05-31 22:38:43 +08:00
isb();
ARM: LPAE: Add context switching support With LPAE, TTBRx registers are 64-bit. The ASID is stored in TTBR0 rather than a separate Context ID register. This patch makes the necessary changes to handle context switching on LPAE. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-11-23 01:30:31 +08:00
}
#else
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
static void cpu_set_reserved_ttbr0(void)
ARM: Use TTBR1 instead of reserved context ID On ARMv7 CPUs that cache first level page table entries (like the Cortex-A15), using a reserved ASID while changing the TTBR or flushing the TLB is unsafe. This is because the CPU may cache the first level entry as the result of a speculative memory access while the reserved ASID is assigned. After the process owning the page tables dies, the memory will be reallocated and may be written with junk values which can be interpreted as global, valid PTEs by the processor. This will result in the TLB being populated with bogus global entries. This patch avoids the use of a reserved context ID in the v7 switch_mm and ASID rollover code by temporarily using the swapper_pg_dir pointed at by TTBR1, which contains only global entries that are not tagged with ASIDs. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Tested-by: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> [catalin.marinas@arm.com: add LPAE support] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-05-31 22:38:43 +08:00
{
u32 ttb;
/* Copy TTBR1 into TTBR0 */
asm volatile(
" mrc p15, 0, %0, c2, c0, 1 @ read TTBR1\n"
" mcr p15, 0, %0, c2, c0, 0 @ set TTBR0\n"
: "=r" (ttb));
isb();
}
ARM: LPAE: Add context switching support With LPAE, TTBRx registers are 64-bit. The ASID is stored in TTBR0 rather than a separate Context ID register. This patch makes the necessary changes to handle context switching on LPAE. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-11-23 01:30:31 +08:00
#endif
ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process This patch introduces a new Kconfig option which, when enabled, causes the kernel to write the PID of the current task into the PROCID field of the CONTEXTIDR on context switch. This is useful when analysing hardware trace, since writes to this register can be configured to emit an event into the trace stream. The thread notifier for writing the PID is deliberately kept separate from the ASID-writing code so that we can support newer processors using LPAE, where the ASID is stored in TTBR0. As such, the switch_mm code is updated to perform a read-modify-write sequence to ensure that we don't clobber the PID on CPUs using the classic 2-level page tables. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-06 22:43:03 +08:00
#ifdef CONFIG_PID_IN_CONTEXTIDR
static int contextidr_notifier(struct notifier_block *unused, unsigned long cmd,
void *t)
{
u32 contextidr;
pid_t pid;
struct thread_info *thread = t;
if (cmd != THREAD_NOTIFY_SWITCH)
return NOTIFY_DONE;
pid = task_pid_nr(thread->task) << ASID_BITS;
asm volatile(
" mrc p15, 0, %0, c13, c0, 1\n"
ARM: 7502/1: contextidr: avoid using bfi instruction during notifier The bfi instruction is not available on ARMv6, so instead use an and/orr sequence in the contextidr_notifier. This gets rid of the assembler error: Assembler messages: Error: selected processor does not support ARM mode `bfi r3,r2,#0,#8' Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-24 22:21:52 +08:00
" and %0, %0, %2\n"
" orr %0, %0, %1\n"
" mcr p15, 0, %0, c13, c0, 1\n"
ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process This patch introduces a new Kconfig option which, when enabled, causes the kernel to write the PID of the current task into the PROCID field of the CONTEXTIDR on context switch. This is useful when analysing hardware trace, since writes to this register can be configured to emit an event into the trace stream. The thread notifier for writing the PID is deliberately kept separate from the ASID-writing code so that we can support newer processors using LPAE, where the ASID is stored in TTBR0. As such, the switch_mm code is updated to perform a read-modify-write sequence to ensure that we don't clobber the PID on CPUs using the classic 2-level page tables. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-06 22:43:03 +08:00
: "=r" (contextidr), "+r" (pid)
ARM: 7502/1: contextidr: avoid using bfi instruction during notifier The bfi instruction is not available on ARMv6, so instead use an and/orr sequence in the contextidr_notifier. This gets rid of the assembler error: Assembler messages: Error: selected processor does not support ARM mode `bfi r3,r2,#0,#8' Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-24 22:21:52 +08:00
: "I" (~ASID_MASK));
ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process This patch introduces a new Kconfig option which, when enabled, causes the kernel to write the PID of the current task into the PROCID field of the CONTEXTIDR on context switch. This is useful when analysing hardware trace, since writes to this register can be configured to emit an event into the trace stream. The thread notifier for writing the PID is deliberately kept separate from the ASID-writing code so that we can support newer processors using LPAE, where the ASID is stored in TTBR0. As such, the switch_mm code is updated to perform a read-modify-write sequence to ensure that we don't clobber the PID on CPUs using the classic 2-level page tables. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-06 22:43:03 +08:00
isb();
return NOTIFY_OK;
}
static struct notifier_block contextidr_notifier_block = {
.notifier_call = contextidr_notifier,
};
static int __init contextidr_notifier_init(void)
{
return thread_register_notifier(&contextidr_notifier_block);
}
arch_initcall(contextidr_notifier_init);
#endif
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
static void flush_context(unsigned int cpu)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
int i;
ARM: mm: use bitmap operations when allocating new ASIDs When allocating a new ASID, we must take care not to re-assign a reserved ASID-value to a new mm. This requires us to check each candidate ASID against those currently reserved by other cores before assigning a new ASID to the current mm. This patch improves the ASID allocation algorithm by using a bitmap-based approach. Rather than iterating over the reserved ASID array for each candidate ASID, we simply find the first zero bit, ensuring that those indices corresponding to reserved ASIDs are set when flushing during a rollover event. Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-01 21:57:49 +08:00
u64 asid;
/* Update the list of reserved ASIDs and the ASID bitmap. */
bitmap_clear(asid_map, 0, NUM_USER_ASIDS);
for_each_possible_cpu(i) {
if (i == cpu) {
asid = 0;
} else {
asid = atomic64_xchg(&per_cpu(active_asids, i), 0);
ARM: 7767/1: let the ASID allocator handle suspended animation When a CPU is running a process, the ASID for that process is held in a per-CPU variable (the "active ASIDs" array). When the ASID allocator handles a rollover, it copies the active ASIDs into a "reserved ASIDs" array to ensure that a process currently running on another CPU will continue to run unaffected. The active array is zero-ed to indicate that a rollover occurred. Because of this mechanism, a reserved ASID is only remembered for a single rollover. A subsequent rollover will completely refill the reserved ASIDs array. In a severely oversubscribed environment where a CPU can be prevented from running for extended periods of time (think virtual machines), the above has a horrible side effect: [P{a} denotes process P running with ASID a] CPU-0 CPU-1 A{x} [active = <x 0>] [suspended] runs B{y} [active = <x y>] [rollover: active = <0 0> reserved = <x y>] runs B{y} [active = <0 y> reserved = <x y>] [rollover: active = <0 0> reserved = <0 y>] runs C{x} [active = <0 x>] [resumes] runs A{x} At that stage, both A and C have the same ASID, with deadly consequences. The fix is to preserve reserved ASIDs across rollovers if the CPU doesn't have an active ASID when the rollover occurs. Cc: <stable@vger.kernel.org> # 3.9 Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Catalin Carinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-21 19:06:19 +08:00
/*
* If this CPU has already been through a
* rollover, but hasn't run another task in
* the meantime, we must preserve its reserved
* ASID, as this is the only trace we have of
* the process it is still running.
*/
if (asid == 0)
asid = per_cpu(reserved_asids, i);
ARM: 7768/1: prevent risks of out-of-bound access in ASID allocator On a CPU that never ran anything, both the active and reserved ASID fields are set to zero. In this case the ASID_TO_IDX() macro will return -1, which is not a very useful value to index a bitmap. Instead of trying to offset the ASID so that ASID #1 is actually bit 0 in the asid_map bitmap, just always ignore bit 0 and start the search from bit 1. This makes the code a bit more readable, and without risk of OoB access. Cc: <stable@vger.kernel.org> # 3.9 Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-21 19:06:55 +08:00
__set_bit(asid & ~ASID_MASK, asid_map);
ARM: mm: use bitmap operations when allocating new ASIDs When allocating a new ASID, we must take care not to re-assign a reserved ASID-value to a new mm. This requires us to check each candidate ASID against those currently reserved by other cores before assigning a new ASID to the current mm. This patch improves the ASID allocation algorithm by using a bitmap-based approach. Rather than iterating over the reserved ASID array for each candidate ASID, we simply find the first zero bit, ensuring that those indices corresponding to reserved ASIDs are set when flushing during a rollover event. Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-01 21:57:49 +08:00
}
per_cpu(reserved_asids, i) = asid;
}
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
/* Queue a TLB invalidate and flush the I-cache if necessary. */
ARM: tlb: don't perform inner-shareable invalidation for local TLB ops Inner-shareable TLB invalidation is typically more expensive than local (non-shareable) invalidation, so performing the broadcasting for local_flush_tlb_* operations is a waste of cycles and needlessly clobbers entries in the TLBs of other CPUs. This patch introduces __flush_tlb_* versions for many of the TLB invalidation functions, which only respect inner-shareable variants of the invalidation instructions when presented with the TLB_V7_UIS_FULL flag. The local version is also inlined to prevent SMP_ON_UP kernels from missing flushes, where the __flush variant would be called with the UP flags. This gains us around 0.5% in hackbench scores for a dual-core A15, but I would expect this to improve as more cores (and clusters) are added to the equation. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Albin Tonnerre <Albin.Tonnerre@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-02-11 21:47:48 +08:00
cpumask_setall(&tlb_flush_pending);
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
if (icache_is_vivt_asid_tagged())
ARM: 5905/1: ARM: Global ASID allocation on SMP The current ASID allocation algorithm doesn't ensure the notification of the other CPUs when the ASID rolls over. This may lead to two processes using the same ASID (but different generation) or multiple threads of the same process using different ASIDs. This patch adds the broadcasting of the ASID rollover event to the other CPUs. To avoid a race on multiple CPUs modifying "cpu_last_asid" during the handling of the broadcast, the ASID numbering now starts at "smp_processor_id() + 1". At rollover, the cpu_last_asid will be set to NR_CPUS. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-27 02:09:42 +08:00
__flush_icache_all();
}
ARM: mm: use bitmap operations when allocating new ASIDs When allocating a new ASID, we must take care not to re-assign a reserved ASID-value to a new mm. This requires us to check each candidate ASID against those currently reserved by other cores before assigning a new ASID to the current mm. This patch improves the ASID allocation algorithm by using a bitmap-based approach. Rather than iterating over the reserved ASID array for each candidate ASID, we simply find the first zero bit, ensuring that those indices corresponding to reserved ASIDs are set when flushing during a rollover event. Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-01 21:57:49 +08:00
static int is_reserved_asid(u64 asid)
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
{
int cpu;
for_each_possible_cpu(cpu)
ARM: mm: use bitmap operations when allocating new ASIDs When allocating a new ASID, we must take care not to re-assign a reserved ASID-value to a new mm. This requires us to check each candidate ASID against those currently reserved by other cores before assigning a new ASID to the current mm. This patch improves the ASID allocation algorithm by using a bitmap-based approach. Rather than iterating over the reserved ASID array for each candidate ASID, we simply find the first zero bit, ensuring that those indices corresponding to reserved ASIDs are set when flushing during a rollover event. Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-01 21:57:49 +08:00
if (per_cpu(reserved_asids, cpu) == asid)
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
return 1;
return 0;
}
ARM: 5905/1: ARM: Global ASID allocation on SMP The current ASID allocation algorithm doesn't ensure the notification of the other CPUs when the ASID rolls over. This may lead to two processes using the same ASID (but different generation) or multiple threads of the same process using different ASIDs. This patch adds the broadcasting of the ASID rollover event to the other CPUs. To avoid a race on multiple CPUs modifying "cpu_last_asid" during the handling of the broadcast, the ASID numbering now starts at "smp_processor_id() + 1". At rollover, the cpu_last_asid will be set to NR_CPUS. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-27 02:09:42 +08:00
ARM: 7659/1: mm: make mm->context.id an atomic64_t variable mm->context.id is updated under asid_lock when a new ASID is allocated to an mm_struct. However, it is also read without the lock when a task is being scheduled and checking whether or not the current ASID generation is up-to-date. If two threads of the same process are being scheduled in parallel and the bottom bits of the generation in their mm->context.id match the current generation (that is, the mm_struct has not been used for ~2^24 rollovers) then the non-atomic, lockless access to mm->context.id may yield the incorrect ASID. This patch fixes this issue by making mm->context.id and atomic64_t, ensuring that the generation is always read consistently. For code that only requires access to the ASID bits (e.g. TLB flushing by mm), then the value is accessed directly, which GCC converts to an ldrb. Cc: <stable@vger.kernel.org> # 3.8 Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-01 00:47:36 +08:00
static u64 new_context(struct mm_struct *mm, unsigned int cpu)
ARM: 5905/1: ARM: Global ASID allocation on SMP The current ASID allocation algorithm doesn't ensure the notification of the other CPUs when the ASID rolls over. This may lead to two processes using the same ASID (but different generation) or multiple threads of the same process using different ASIDs. This patch adds the broadcasting of the ASID rollover event to the other CPUs. To avoid a race on multiple CPUs modifying "cpu_last_asid" during the handling of the broadcast, the ASID numbering now starts at "smp_processor_id() + 1". At rollover, the cpu_last_asid will be set to NR_CPUS. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-27 02:09:42 +08:00
{
ARM: 7659/1: mm: make mm->context.id an atomic64_t variable mm->context.id is updated under asid_lock when a new ASID is allocated to an mm_struct. However, it is also read without the lock when a task is being scheduled and checking whether or not the current ASID generation is up-to-date. If two threads of the same process are being scheduled in parallel and the bottom bits of the generation in their mm->context.id match the current generation (that is, the mm_struct has not been used for ~2^24 rollovers) then the non-atomic, lockless access to mm->context.id may yield the incorrect ASID. This patch fixes this issue by making mm->context.id and atomic64_t, ensuring that the generation is always read consistently. For code that only requires access to the ASID bits (e.g. TLB flushing by mm), then the value is accessed directly, which GCC converts to an ldrb. Cc: <stable@vger.kernel.org> # 3.8 Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-01 00:47:36 +08:00
u64 asid = atomic64_read(&mm->context.id);
ARM: mm: use bitmap operations when allocating new ASIDs When allocating a new ASID, we must take care not to re-assign a reserved ASID-value to a new mm. This requires us to check each candidate ASID against those currently reserved by other cores before assigning a new ASID to the current mm. This patch improves the ASID allocation algorithm by using a bitmap-based approach. Rather than iterating over the reserved ASID array for each candidate ASID, we simply find the first zero bit, ensuring that those indices corresponding to reserved ASIDs are set when flushing during a rollover event. Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-01 21:57:49 +08:00
u64 generation = atomic64_read(&asid_generation);
ARM: 5905/1: ARM: Global ASID allocation on SMP The current ASID allocation algorithm doesn't ensure the notification of the other CPUs when the ASID rolls over. This may lead to two processes using the same ASID (but different generation) or multiple threads of the same process using different ASIDs. This patch adds the broadcasting of the ASID rollover event to the other CPUs. To avoid a race on multiple CPUs modifying "cpu_last_asid" during the handling of the broadcast, the ASID numbering now starts at "smp_processor_id() + 1". At rollover, the cpu_last_asid will be set to NR_CPUS. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-27 02:09:42 +08:00
ARM: mm: use bitmap operations when allocating new ASIDs When allocating a new ASID, we must take care not to re-assign a reserved ASID-value to a new mm. This requires us to check each candidate ASID against those currently reserved by other cores before assigning a new ASID to the current mm. This patch improves the ASID allocation algorithm by using a bitmap-based approach. Rather than iterating over the reserved ASID array for each candidate ASID, we simply find the first zero bit, ensuring that those indices corresponding to reserved ASIDs are set when flushing during a rollover event. Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-01 21:57:49 +08:00
if (asid != 0 && is_reserved_asid(asid)) {
ARM: 5905/1: ARM: Global ASID allocation on SMP The current ASID allocation algorithm doesn't ensure the notification of the other CPUs when the ASID rolls over. This may lead to two processes using the same ASID (but different generation) or multiple threads of the same process using different ASIDs. This patch adds the broadcasting of the ASID rollover event to the other CPUs. To avoid a race on multiple CPUs modifying "cpu_last_asid" during the handling of the broadcast, the ASID numbering now starts at "smp_processor_id() + 1". At rollover, the cpu_last_asid will be set to NR_CPUS. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-27 02:09:42 +08:00
/*
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
* Our current ASID was active during a rollover, we can
* continue to use it and this was just a false alarm.
ARM: 5905/1: ARM: Global ASID allocation on SMP The current ASID allocation algorithm doesn't ensure the notification of the other CPUs when the ASID rolls over. This may lead to two processes using the same ASID (but different generation) or multiple threads of the same process using different ASIDs. This patch adds the broadcasting of the ASID rollover event to the other CPUs. To avoid a race on multiple CPUs modifying "cpu_last_asid" during the handling of the broadcast, the ASID numbering now starts at "smp_processor_id() + 1". At rollover, the cpu_last_asid will be set to NR_CPUS. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-27 02:09:42 +08:00
*/
ARM: mm: use bitmap operations when allocating new ASIDs When allocating a new ASID, we must take care not to re-assign a reserved ASID-value to a new mm. This requires us to check each candidate ASID against those currently reserved by other cores before assigning a new ASID to the current mm. This patch improves the ASID allocation algorithm by using a bitmap-based approach. Rather than iterating over the reserved ASID array for each candidate ASID, we simply find the first zero bit, ensuring that those indices corresponding to reserved ASIDs are set when flushing during a rollover event. Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-01 21:57:49 +08:00
asid = generation | (asid & ~ASID_MASK);
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
} else {
/*
* Allocate a free ASID. If we can't find one, take a
* note of the currently active ASIDs and mark the TLBs
ARM: 7768/1: prevent risks of out-of-bound access in ASID allocator On a CPU that never ran anything, both the active and reserved ASID fields are set to zero. In this case the ASID_TO_IDX() macro will return -1, which is not a very useful value to index a bitmap. Instead of trying to offset the ASID so that ASID #1 is actually bit 0 in the asid_map bitmap, just always ignore bit 0 and start the search from bit 1. This makes the code a bit more readable, and without risk of OoB access. Cc: <stable@vger.kernel.org> # 3.9 Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-21 19:06:55 +08:00
* as requiring flushes. We always count from ASID #1,
* as we reserve ASID #0 to switch via TTBR0 and indicate
* rollover events.
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
*/
ARM: 7768/1: prevent risks of out-of-bound access in ASID allocator On a CPU that never ran anything, both the active and reserved ASID fields are set to zero. In this case the ASID_TO_IDX() macro will return -1, which is not a very useful value to index a bitmap. Instead of trying to offset the ASID so that ASID #1 is actually bit 0 in the asid_map bitmap, just always ignore bit 0 and start the search from bit 1. This makes the code a bit more readable, and without risk of OoB access. Cc: <stable@vger.kernel.org> # 3.9 Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-21 19:06:55 +08:00
asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, 1);
ARM: mm: use bitmap operations when allocating new ASIDs When allocating a new ASID, we must take care not to re-assign a reserved ASID-value to a new mm. This requires us to check each candidate ASID against those currently reserved by other cores before assigning a new ASID to the current mm. This patch improves the ASID allocation algorithm by using a bitmap-based approach. Rather than iterating over the reserved ASID array for each candidate ASID, we simply find the first zero bit, ensuring that those indices corresponding to reserved ASIDs are set when flushing during a rollover event. Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-01 21:57:49 +08:00
if (asid == NUM_USER_ASIDS) {
generation = atomic64_add_return(ASID_FIRST_VERSION,
&asid_generation);
flush_context(cpu);
ARM: 7768/1: prevent risks of out-of-bound access in ASID allocator On a CPU that never ran anything, both the active and reserved ASID fields are set to zero. In this case the ASID_TO_IDX() macro will return -1, which is not a very useful value to index a bitmap. Instead of trying to offset the ASID so that ASID #1 is actually bit 0 in the asid_map bitmap, just always ignore bit 0 and start the search from bit 1. This makes the code a bit more readable, and without risk of OoB access. Cc: <stable@vger.kernel.org> # 3.9 Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-21 19:06:55 +08:00
asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, 1);
ARM: mm: use bitmap operations when allocating new ASIDs When allocating a new ASID, we must take care not to re-assign a reserved ASID-value to a new mm. This requires us to check each candidate ASID against those currently reserved by other cores before assigning a new ASID to the current mm. This patch improves the ASID allocation algorithm by using a bitmap-based approach. Rather than iterating over the reserved ASID array for each candidate ASID, we simply find the first zero bit, ensuring that those indices corresponding to reserved ASIDs are set when flushing during a rollover event. Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-01 21:57:49 +08:00
}
__set_bit(asid, asid_map);
ARM: 7768/1: prevent risks of out-of-bound access in ASID allocator On a CPU that never ran anything, both the active and reserved ASID fields are set to zero. In this case the ASID_TO_IDX() macro will return -1, which is not a very useful value to index a bitmap. Instead of trying to offset the ASID so that ASID #1 is actually bit 0 in the asid_map bitmap, just always ignore bit 0 and start the search from bit 1. This makes the code a bit more readable, and without risk of OoB access. Cc: <stable@vger.kernel.org> # 3.9 Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-21 19:06:55 +08:00
asid |= generation;
ARM: 5905/1: ARM: Global ASID allocation on SMP The current ASID allocation algorithm doesn't ensure the notification of the other CPUs when the ASID rolls over. This may lead to two processes using the same ASID (but different generation) or multiple threads of the same process using different ASIDs. This patch adds the broadcasting of the ASID rollover event to the other CPUs. To avoid a race on multiple CPUs modifying "cpu_last_asid" during the handling of the broadcast, the ASID numbering now starts at "smp_processor_id() + 1". At rollover, the cpu_last_asid will be set to NR_CPUS. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-27 02:09:42 +08:00
cpumask_clear(mm_cpumask(mm));
}
ARM: 7659/1: mm: make mm->context.id an atomic64_t variable mm->context.id is updated under asid_lock when a new ASID is allocated to an mm_struct. However, it is also read without the lock when a task is being scheduled and checking whether or not the current ASID generation is up-to-date. If two threads of the same process are being scheduled in parallel and the bottom bits of the generation in their mm->context.id match the current generation (that is, the mm_struct has not been used for ~2^24 rollovers) then the non-atomic, lockless access to mm->context.id may yield the incorrect ASID. This patch fixes this issue by making mm->context.id and atomic64_t, ensuring that the generation is always read consistently. For code that only requires access to the ASID bits (e.g. TLB flushing by mm), then the value is accessed directly, which GCC converts to an ldrb. Cc: <stable@vger.kernel.org> # 3.8 Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-01 00:47:36 +08:00
return asid;
ARM: 5905/1: ARM: Global ASID allocation on SMP The current ASID allocation algorithm doesn't ensure the notification of the other CPUs when the ASID rolls over. This may lead to two processes using the same ASID (but different generation) or multiple threads of the same process using different ASIDs. This patch adds the broadcasting of the ASID rollover event to the other CPUs. To avoid a race on multiple CPUs modifying "cpu_last_asid" during the handling of the broadcast, the ASID numbering now starts at "smp_processor_id() + 1". At rollover, the cpu_last_asid will be set to NR_CPUS. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-27 02:09:42 +08:00
}
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk)
ARM: 5905/1: ARM: Global ASID allocation on SMP The current ASID allocation algorithm doesn't ensure the notification of the other CPUs when the ASID rolls over. This may lead to two processes using the same ASID (but different generation) or multiple threads of the same process using different ASIDs. This patch adds the broadcasting of the ASID rollover event to the other CPUs. To avoid a race on multiple CPUs modifying "cpu_last_asid" during the handling of the broadcast, the ASID numbering now starts at "smp_processor_id() + 1". At rollover, the cpu_last_asid will be set to NR_CPUS. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-27 02:09:42 +08:00
{
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
unsigned long flags;
ARM: 5905/1: ARM: Global ASID allocation on SMP The current ASID allocation algorithm doesn't ensure the notification of the other CPUs when the ASID rolls over. This may lead to two processes using the same ASID (but different generation) or multiple threads of the same process using different ASIDs. This patch adds the broadcasting of the ASID rollover event to the other CPUs. To avoid a race on multiple CPUs modifying "cpu_last_asid" during the handling of the broadcast, the ASID numbering now starts at "smp_processor_id() + 1". At rollover, the cpu_last_asid will be set to NR_CPUS. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-27 02:09:42 +08:00
unsigned int cpu = smp_processor_id();
ARM: 7659/1: mm: make mm->context.id an atomic64_t variable mm->context.id is updated under asid_lock when a new ASID is allocated to an mm_struct. However, it is also read without the lock when a task is being scheduled and checking whether or not the current ASID generation is up-to-date. If two threads of the same process are being scheduled in parallel and the bottom bits of the generation in their mm->context.id match the current generation (that is, the mm_struct has not been used for ~2^24 rollovers) then the non-atomic, lockless access to mm->context.id may yield the incorrect ASID. This patch fixes this issue by making mm->context.id and atomic64_t, ensuring that the generation is always read consistently. For code that only requires access to the ASID bits (e.g. TLB flushing by mm), then the value is accessed directly, which GCC converts to an ldrb. Cc: <stable@vger.kernel.org> # 3.8 Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-01 00:47:36 +08:00
u64 asid;
ARM: 5905/1: ARM: Global ASID allocation on SMP The current ASID allocation algorithm doesn't ensure the notification of the other CPUs when the ASID rolls over. This may lead to two processes using the same ASID (but different generation) or multiple threads of the same process using different ASIDs. This patch adds the broadcasting of the ASID rollover event to the other CPUs. To avoid a race on multiple CPUs modifying "cpu_last_asid" during the handling of the broadcast, the ASID numbering now starts at "smp_processor_id() + 1". At rollover, the cpu_last_asid will be set to NR_CPUS. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-27 02:09:42 +08:00
ARM: 7582/2: rename kvm_seq to vmalloc_seq so to avoid confusion with KVM The kvm_seq value has nothing to do what so ever with this other KVM. Given that KVM support on ARM is imminent, it's best to rename kvm_seq into something else to clearly identify what it is about i.e. a sequence number for vmalloc section mappings. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-11-25 10:24:32 +08:00
if (unlikely(mm->context.vmalloc_seq != init_mm.context.vmalloc_seq))
__check_vmalloc_seq(mm);
ARM: 5905/1: ARM: Global ASID allocation on SMP The current ASID allocation algorithm doesn't ensure the notification of the other CPUs when the ASID rolls over. This may lead to two processes using the same ASID (but different generation) or multiple threads of the same process using different ASIDs. This patch adds the broadcasting of the ASID rollover event to the other CPUs. To avoid a race on multiple CPUs modifying "cpu_last_asid" during the handling of the broadcast, the ASID numbering now starts at "smp_processor_id() + 1". At rollover, the cpu_last_asid will be set to NR_CPUS. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-27 02:09:42 +08:00
/*
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
* Required during context switch to avoid speculative page table
* walking with the wrong TTBR.
ARM: 5905/1: ARM: Global ASID allocation on SMP The current ASID allocation algorithm doesn't ensure the notification of the other CPUs when the ASID rolls over. This may lead to two processes using the same ASID (but different generation) or multiple threads of the same process using different ASIDs. This patch adds the broadcasting of the ASID rollover event to the other CPUs. To avoid a race on multiple CPUs modifying "cpu_last_asid" during the handling of the broadcast, the ASID numbering now starts at "smp_processor_id() + 1". At rollover, the cpu_last_asid will be set to NR_CPUS. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-27 02:09:42 +08:00
*/
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
cpu_set_reserved_ttbr0();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ARM: 7659/1: mm: make mm->context.id an atomic64_t variable mm->context.id is updated under asid_lock when a new ASID is allocated to an mm_struct. However, it is also read without the lock when a task is being scheduled and checking whether or not the current ASID generation is up-to-date. If two threads of the same process are being scheduled in parallel and the bottom bits of the generation in their mm->context.id match the current generation (that is, the mm_struct has not been used for ~2^24 rollovers) then the non-atomic, lockless access to mm->context.id may yield the incorrect ASID. This patch fixes this issue by making mm->context.id and atomic64_t, ensuring that the generation is always read consistently. For code that only requires access to the ASID bits (e.g. TLB flushing by mm), then the value is accessed directly, which GCC converts to an ldrb. Cc: <stable@vger.kernel.org> # 3.8 Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-01 00:47:36 +08:00
asid = atomic64_read(&mm->context.id);
if (!((asid ^ atomic64_read(&asid_generation)) >> ASID_BITS)
&& atomic64_xchg(&per_cpu(active_asids, cpu), asid))
ARM: mm: avoid taking ASID spinlock on fastpath When scheduling a new mm, we take a spinlock so that we can: 1. Safely allocate a new ASID, if required 2. Update our active_asids field without worrying about parallel updates to reserved_asids 3. Ensure that we flush our local TLB, if required However, this has the nasty affect of serialising context-switch across all CPUs in the system. The usual (fast) case is where the next mm has a valid ASID for the current generation. In such a scenario, we can avoid taking the lock and instead use atomic64_xchg to update the active_asids variable for the current CPU. If a rollover occurs on another CPU (which would take the lock), when copying the active_asids into the reserved_asids another atomic64_xchg is used to replace each active_asids with 0. The fast path can then detect this case and fall back to spinning on the lock. Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-07-27 19:31:35 +08:00
goto switch_mm_fastpath;
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
raw_spin_lock_irqsave(&cpu_asid_lock, flags);
/* Check that our ASID belongs to the current generation. */
ARM: 7659/1: mm: make mm->context.id an atomic64_t variable mm->context.id is updated under asid_lock when a new ASID is allocated to an mm_struct. However, it is also read without the lock when a task is being scheduled and checking whether or not the current ASID generation is up-to-date. If two threads of the same process are being scheduled in parallel and the bottom bits of the generation in their mm->context.id match the current generation (that is, the mm_struct has not been used for ~2^24 rollovers) then the non-atomic, lockless access to mm->context.id may yield the incorrect ASID. This patch fixes this issue by making mm->context.id and atomic64_t, ensuring that the generation is always read consistently. For code that only requires access to the ASID bits (e.g. TLB flushing by mm), then the value is accessed directly, which GCC converts to an ldrb. Cc: <stable@vger.kernel.org> # 3.8 Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-01 00:47:36 +08:00
asid = atomic64_read(&mm->context.id);
if ((asid ^ atomic64_read(&asid_generation)) >> ASID_BITS) {
asid = new_context(mm, cpu);
atomic64_set(&mm->context.id, asid);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ARM: 7661/1: mm: perform explicit branch predictor maintenance when required The ARM ARM requires branch predictor maintenance if, for a given ASID, the instructions at a specific virtual address appear to change. From the kernel's point of view, that means: - Changing the kernel's view of memory (e.g. switching to the identity map) - ASID rollover (since ASIDs will be re-allocated to new tasks) This patch adds explicit branch predictor maintenance when either of the two conditions above are met. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-01 00:48:40 +08:00
if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) {
local_flush_bp_all();
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
local_flush_tlb_all();
ARM: 7661/1: mm: perform explicit branch predictor maintenance when required The ARM ARM requires branch predictor maintenance if, for a given ASID, the instructions at a specific virtual address appear to change. From the kernel's point of view, that means: - Changing the kernel's view of memory (e.g. switching to the identity map) - ASID rollover (since ASIDs will be re-allocated to new tasks) This patch adds explicit branch predictor maintenance when either of the two conditions above are met. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-01 00:48:40 +08:00
}
ARM: 7658/1: mm: fix race updating mm->context.id on ASID rollover If a thread triggers an ASID rollover, other threads of the same process must be made to wait until the mm->context.id for the shared mm_struct has been updated to new generation and associated book-keeping (e.g. TLB invalidation) has ben performed. However, there is a *tiny* window where both mm->context.id and the relevant active_asids entry are updated to the new generation, but the TLB flush has not been performed, which could allow another thread to return to userspace with a dirty TLB, potentially leading to data corruption. In reality this will never occur because one CPU would need to perform a context-switch in the time it takes another to do a couple of atomic test/set operations but we should plug the race anyway. This patch moves the active_asids update until after the potential TLB flush on context-switch. Cc: <stable@vger.kernel.org> # 3.8 Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-01 00:47:20 +08:00
ARM: 7659/1: mm: make mm->context.id an atomic64_t variable mm->context.id is updated under asid_lock when a new ASID is allocated to an mm_struct. However, it is also read without the lock when a task is being scheduled and checking whether or not the current ASID generation is up-to-date. If two threads of the same process are being scheduled in parallel and the bottom bits of the generation in their mm->context.id match the current generation (that is, the mm_struct has not been used for ~2^24 rollovers) then the non-atomic, lockless access to mm->context.id may yield the incorrect ASID. This patch fixes this issue by making mm->context.id and atomic64_t, ensuring that the generation is always read consistently. For code that only requires access to the ASID bits (e.g. TLB flushing by mm), then the value is accessed directly, which GCC converts to an ldrb. Cc: <stable@vger.kernel.org> # 3.8 Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-01 00:47:36 +08:00
atomic64_set(&per_cpu(active_asids, cpu), asid);
ARM: 7658/1: mm: fix race updating mm->context.id on ASID rollover If a thread triggers an ASID rollover, other threads of the same process must be made to wait until the mm->context.id for the shared mm_struct has been updated to new generation and associated book-keeping (e.g. TLB invalidation) has ben performed. However, there is a *tiny* window where both mm->context.id and the relevant active_asids entry are updated to the new generation, but the TLB flush has not been performed, which could allow another thread to return to userspace with a dirty TLB, potentially leading to data corruption. In reality this will never occur because one CPU would need to perform a context-switch in the time it takes another to do a couple of atomic test/set operations but we should plug the race anyway. This patch moves the active_asids update until after the potential TLB flush on context-switch. Cc: <stable@vger.kernel.org> # 3.8 Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-01 00:47:20 +08:00
cpumask_set_cpu(cpu, mm_cpumask(mm));
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
raw_spin_unlock_irqrestore(&cpu_asid_lock, flags);
ARM: mm: avoid taking ASID spinlock on fastpath When scheduling a new mm, we take a spinlock so that we can: 1. Safely allocate a new ASID, if required 2. Update our active_asids field without worrying about parallel updates to reserved_asids 3. Ensure that we flush our local TLB, if required However, this has the nasty affect of serialising context-switch across all CPUs in the system. The usual (fast) case is where the next mm has a valid ASID for the current generation. In such a scenario, we can avoid taking the lock and instead use atomic64_xchg to update the active_asids variable for the current CPU. If a rollover occurs on another CPU (which would take the lock), when copying the active_asids into the reserved_asids another atomic64_xchg is used to replace each active_asids with 0. The fast path can then detect this case and fall back to spinning on the lock. Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-07-27 19:31:35 +08:00
switch_mm_fastpath:
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 21:47:31 +08:00
cpu_switch_mm(mm->pgd, mm);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}