OpenCloudOS-Kernel/arch/x86/xen/time.c

488 lines
12 KiB
C
Raw Normal View History

/*
* Xen time implementation.
*
* This is implemented in terms of a clocksource driver which uses
* the hypervisor clock as a nanosecond timebase, and a clockevent
* driver which uses the hypervisor's timer mechanism.
*
* Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/kernel_stat.h>
#include <linux/math64.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/gfp.h>
#include <linux/slab.h>
#include <linux/pvclock_gtod.h>
#include <linux/timekeeper_internal.h>
#include <asm/pvclock.h>
#include <asm/xen/hypervisor.h>
#include <asm/xen/hypercall.h>
#include <xen/events.h>
#include <xen/features.h>
#include <xen/interface/xen.h>
#include <xen/interface/vcpu.h>
#include "xen-ops.h"
/* Xen may fire a timer up to this many ns early */
#define TIMER_SLOP 100000
#define NS_PER_TICK (1000000000LL / HZ)
/* snapshots of runstate info */
static DEFINE_PER_CPU(struct vcpu_runstate_info, xen_runstate_snapshot);
/* unused ns of stolen time */
static DEFINE_PER_CPU(u64, xen_residual_stolen);
static void do_stolen_accounting(void)
{
struct vcpu_runstate_info state;
struct vcpu_runstate_info *snap;
s64 runnable, offline, stolen;
cputime_t ticks;
xen_get_runstate_snapshot(&state);
WARN_ON(state.state != RUNSTATE_running);
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-18 01:30:40 +08:00
snap = this_cpu_ptr(&xen_runstate_snapshot);
/* work out how much time the VCPU has not been runn*ing* */
runnable = state.time[RUNSTATE_runnable] - snap->time[RUNSTATE_runnable];
offline = state.time[RUNSTATE_offline] - snap->time[RUNSTATE_offline];
*snap = state;
/* Add the appropriate number of ticks of stolen time,
2008-12-31 22:11:38 +08:00
including any left-overs from last time. */
stolen = runnable + offline + __this_cpu_read(xen_residual_stolen);
if (stolen < 0)
stolen = 0;
ticks = iter_div_u64_rem(stolen, NS_PER_TICK, &stolen);
__this_cpu_write(xen_residual_stolen, stolen);
2008-12-31 22:11:38 +08:00
account_steal_ticks(ticks);
}
/* Get the TSC speed from Xen */
static unsigned long xen_tsc_khz(void)
{
struct pvclock_vcpu_time_info *info =
&HYPERVISOR_shared_info->vcpu_info[0].time;
return pvclock_tsc_khz(info);
}
cycle_t xen_clocksource_read(void)
{
struct pvclock_vcpu_time_info *src;
cycle_t ret;
preempt_disable_notrace();
src = &__this_cpu_read(xen_vcpu)->time;
ret = pvclock_clocksource_read(src);
preempt_enable_notrace();
return ret;
}
static cycle_t xen_clocksource_get_cycles(struct clocksource *cs)
{
return xen_clocksource_read();
}
static void xen_read_wallclock(struct timespec *ts)
{
struct shared_info *s = HYPERVISOR_shared_info;
struct pvclock_wall_clock *wall_clock = &(s->wc);
struct pvclock_vcpu_time_info *vcpu_time;
vcpu_time = &get_cpu_var(xen_vcpu)->time;
pvclock_read_wallclock(wall_clock, vcpu_time, ts);
put_cpu_var(xen_vcpu);
}
static void xen_get_wallclock(struct timespec *now)
{
xen_read_wallclock(now);
}
static int xen_set_wallclock(const struct timespec *now)
{
x86: xen: Sync the CMOS RTC as well as the Xen wallclock Adjustments to Xen's persistent clock via update_persistent_clock() don't actually persist, as the Xen wallclock is a software only clock and modifications to it do not modify the underlying CMOS RTC. The x86_platform.set_wallclock hook is there to keep the hardware RTC synchronized. On a guest this is pointless. On Dom0 we can use the native implementaion which actually updates the hardware RTC, but we still need to keep the software emulation of RTC for the guests up to date. The subscription to the pvclock_notifier allows us to emulate this easily. The notifier is called at every tick and when the clock was set. Right now we only use that notifier when the clock was set, but due to the fact that it is called periodically from the timekeeping update code, we can utilize it to emulate the NTP driven drift compensation of update_persistant_clock() for the Xen wall (software) clock. Add a 11 minutes periodic update to the pvclock_gtod notifier callback to achieve that. The static variable 'next' which maintains that 11 minutes update cycle is protected by the core code serialization so there is no need to add a Xen specific serialization mechanism. [ tglx: Massaged changelog and added a few comments ] Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: John Stultz <john.stultz@linaro.org> Cc: <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/1372329348-20841-6-git-send-email-david.vrabel@citrix.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-27 18:35:48 +08:00
return -1;
}
x86: xen: Sync the CMOS RTC as well as the Xen wallclock Adjustments to Xen's persistent clock via update_persistent_clock() don't actually persist, as the Xen wallclock is a software only clock and modifications to it do not modify the underlying CMOS RTC. The x86_platform.set_wallclock hook is there to keep the hardware RTC synchronized. On a guest this is pointless. On Dom0 we can use the native implementaion which actually updates the hardware RTC, but we still need to keep the software emulation of RTC for the guests up to date. The subscription to the pvclock_notifier allows us to emulate this easily. The notifier is called at every tick and when the clock was set. Right now we only use that notifier when the clock was set, but due to the fact that it is called periodically from the timekeeping update code, we can utilize it to emulate the NTP driven drift compensation of update_persistant_clock() for the Xen wall (software) clock. Add a 11 minutes periodic update to the pvclock_gtod notifier callback to achieve that. The static variable 'next' which maintains that 11 minutes update cycle is protected by the core code serialization so there is no need to add a Xen specific serialization mechanism. [ tglx: Massaged changelog and added a few comments ] Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: John Stultz <john.stultz@linaro.org> Cc: <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/1372329348-20841-6-git-send-email-david.vrabel@citrix.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-27 18:35:48 +08:00
static int xen_pvclock_gtod_notify(struct notifier_block *nb,
unsigned long was_set, void *priv)
{
x86: xen: Sync the CMOS RTC as well as the Xen wallclock Adjustments to Xen's persistent clock via update_persistent_clock() don't actually persist, as the Xen wallclock is a software only clock and modifications to it do not modify the underlying CMOS RTC. The x86_platform.set_wallclock hook is there to keep the hardware RTC synchronized. On a guest this is pointless. On Dom0 we can use the native implementaion which actually updates the hardware RTC, but we still need to keep the software emulation of RTC for the guests up to date. The subscription to the pvclock_notifier allows us to emulate this easily. The notifier is called at every tick and when the clock was set. Right now we only use that notifier when the clock was set, but due to the fact that it is called periodically from the timekeeping update code, we can utilize it to emulate the NTP driven drift compensation of update_persistant_clock() for the Xen wall (software) clock. Add a 11 minutes periodic update to the pvclock_gtod notifier callback to achieve that. The static variable 'next' which maintains that 11 minutes update cycle is protected by the core code serialization so there is no need to add a Xen specific serialization mechanism. [ tglx: Massaged changelog and added a few comments ] Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: John Stultz <john.stultz@linaro.org> Cc: <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/1372329348-20841-6-git-send-email-david.vrabel@citrix.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-27 18:35:48 +08:00
/* Protected by the calling core code serialization */
static struct timespec64 next_sync;
struct xen_platform_op op;
struct timespec64 now;
struct timekeeper *tk = priv;
static bool settime64_supported = true;
int ret;
now.tv_sec = tk->xtime_sec;
now.tv_nsec = (long)(tk->tkr_mono.xtime_nsec >> tk->tkr_mono.shift);
x86: xen: Sync the CMOS RTC as well as the Xen wallclock Adjustments to Xen's persistent clock via update_persistent_clock() don't actually persist, as the Xen wallclock is a software only clock and modifications to it do not modify the underlying CMOS RTC. The x86_platform.set_wallclock hook is there to keep the hardware RTC synchronized. On a guest this is pointless. On Dom0 we can use the native implementaion which actually updates the hardware RTC, but we still need to keep the software emulation of RTC for the guests up to date. The subscription to the pvclock_notifier allows us to emulate this easily. The notifier is called at every tick and when the clock was set. Right now we only use that notifier when the clock was set, but due to the fact that it is called periodically from the timekeeping update code, we can utilize it to emulate the NTP driven drift compensation of update_persistant_clock() for the Xen wall (software) clock. Add a 11 minutes periodic update to the pvclock_gtod notifier callback to achieve that. The static variable 'next' which maintains that 11 minutes update cycle is protected by the core code serialization so there is no need to add a Xen specific serialization mechanism. [ tglx: Massaged changelog and added a few comments ] Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: John Stultz <john.stultz@linaro.org> Cc: <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/1372329348-20841-6-git-send-email-david.vrabel@citrix.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-27 18:35:48 +08:00
/*
* We only take the expensive HV call when the clock was set
* or when the 11 minutes RTC synchronization time elapsed.
*/
if (!was_set && timespec64_compare(&now, &next_sync) < 0)
x86: xen: Sync the CMOS RTC as well as the Xen wallclock Adjustments to Xen's persistent clock via update_persistent_clock() don't actually persist, as the Xen wallclock is a software only clock and modifications to it do not modify the underlying CMOS RTC. The x86_platform.set_wallclock hook is there to keep the hardware RTC synchronized. On a guest this is pointless. On Dom0 we can use the native implementaion which actually updates the hardware RTC, but we still need to keep the software emulation of RTC for the guests up to date. The subscription to the pvclock_notifier allows us to emulate this easily. The notifier is called at every tick and when the clock was set. Right now we only use that notifier when the clock was set, but due to the fact that it is called periodically from the timekeeping update code, we can utilize it to emulate the NTP driven drift compensation of update_persistant_clock() for the Xen wall (software) clock. Add a 11 minutes periodic update to the pvclock_gtod notifier callback to achieve that. The static variable 'next' which maintains that 11 minutes update cycle is protected by the core code serialization so there is no need to add a Xen specific serialization mechanism. [ tglx: Massaged changelog and added a few comments ] Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: John Stultz <john.stultz@linaro.org> Cc: <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/1372329348-20841-6-git-send-email-david.vrabel@citrix.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-27 18:35:48 +08:00
return NOTIFY_OK;
again:
if (settime64_supported) {
op.cmd = XENPF_settime64;
op.u.settime64.mbz = 0;
op.u.settime64.secs = now.tv_sec;
op.u.settime64.nsecs = now.tv_nsec;
op.u.settime64.system_time = xen_clocksource_read();
} else {
op.cmd = XENPF_settime32;
op.u.settime32.secs = now.tv_sec;
op.u.settime32.nsecs = now.tv_nsec;
op.u.settime32.system_time = xen_clocksource_read();
}
ret = HYPERVISOR_platform_op(&op);
if (ret == -ENOSYS && settime64_supported) {
settime64_supported = false;
goto again;
}
if (ret < 0)
return NOTIFY_BAD;
x86: xen: Sync the CMOS RTC as well as the Xen wallclock Adjustments to Xen's persistent clock via update_persistent_clock() don't actually persist, as the Xen wallclock is a software only clock and modifications to it do not modify the underlying CMOS RTC. The x86_platform.set_wallclock hook is there to keep the hardware RTC synchronized. On a guest this is pointless. On Dom0 we can use the native implementaion which actually updates the hardware RTC, but we still need to keep the software emulation of RTC for the guests up to date. The subscription to the pvclock_notifier allows us to emulate this easily. The notifier is called at every tick and when the clock was set. Right now we only use that notifier when the clock was set, but due to the fact that it is called periodically from the timekeeping update code, we can utilize it to emulate the NTP driven drift compensation of update_persistant_clock() for the Xen wall (software) clock. Add a 11 minutes periodic update to the pvclock_gtod notifier callback to achieve that. The static variable 'next' which maintains that 11 minutes update cycle is protected by the core code serialization so there is no need to add a Xen specific serialization mechanism. [ tglx: Massaged changelog and added a few comments ] Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: John Stultz <john.stultz@linaro.org> Cc: <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/1372329348-20841-6-git-send-email-david.vrabel@citrix.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-27 18:35:48 +08:00
/*
* Move the next drift compensation time 11 minutes
* ahead. That's emulating the sync_cmos_clock() update for
* the hardware RTC.
*/
next_sync = now;
next_sync.tv_sec += 11 * 60;
return NOTIFY_OK;
}
static struct notifier_block xen_pvclock_gtod_notifier = {
.notifier_call = xen_pvclock_gtod_notify,
};
static struct clocksource xen_clocksource __read_mostly = {
.name = "xen",
.rating = 400,
.read = xen_clocksource_get_cycles,
.mask = ~0,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
/*
Xen clockevent implementation
Xen has two clockevent implementations:
The old timer_op one works with all released versions of Xen prior
to version 3.0.4. This version of the hypervisor provides a
single-shot timer with nanosecond resolution. However, sharing the
same event channel is a 100Hz tick which is delivered while the
vcpu is running. We don't care about or use this tick, but it will
cause the core time code to think the timer fired too soon, and
will end up resetting it each time. It could be filtered, but
doing so has complications when the ktime clocksource is not yet
the xen clocksource (ie, at boot time).
The new vcpu_op-based timer interface allows the tick timer period
to be changed or turned off. The tick timer is not useful as a
periodic timer because events are only delivered to running vcpus.
The one-shot timer can report when a timeout is in the past, so
set_next_event is capable of returning -ETIME when appropriate.
This interface is used when available.
*/
/*
Get a hypervisor absolute time. In theory we could maintain an
offset between the kernel's time and the hypervisor's time, and
apply that to a kernel's absolute timeout. Unfortunately the
hypervisor and kernel times can drift even if the kernel is using
the Xen clocksource, because ntp can warp the kernel's clocksource.
*/
static s64 get_abs_timeout(unsigned long delta)
{
return xen_clocksource_read() + delta;
}
static int xen_timerop_shutdown(struct clock_event_device *evt)
{
/* cancel timeout */
HYPERVISOR_set_timer_op(0);
return 0;
}
static int xen_timerop_set_next_event(unsigned long delta,
struct clock_event_device *evt)
{
WARN_ON(!clockevent_state_oneshot(evt));
if (HYPERVISOR_set_timer_op(get_abs_timeout(delta)) < 0)
BUG();
/* We may have missed the deadline, but there's no real way of
knowing for sure. If the event was in the past, then we'll
get an immediate interrupt. */
return 0;
}
static const struct clock_event_device xen_timerop_clockevent = {
.name = "xen",
.features = CLOCK_EVT_FEAT_ONESHOT,
.max_delta_ns = 0xffffffff,
.min_delta_ns = TIMER_SLOP,
.mult = 1,
.shift = 0,
.rating = 500,
.set_state_shutdown = xen_timerop_shutdown,
.set_next_event = xen_timerop_set_next_event,
};
static int xen_vcpuop_shutdown(struct clock_event_device *evt)
{
int cpu = smp_processor_id();
if (HYPERVISOR_vcpu_op(VCPUOP_stop_singleshot_timer, cpu, NULL) ||
HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL))
BUG();
return 0;
}
static int xen_vcpuop_set_oneshot(struct clock_event_device *evt)
{
int cpu = smp_processor_id();
if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL))
BUG();
return 0;
}
static int xen_vcpuop_set_next_event(unsigned long delta,
struct clock_event_device *evt)
{
int cpu = smp_processor_id();
struct vcpu_set_singleshot_timer single;
int ret;
WARN_ON(!clockevent_state_oneshot(evt));
single.timeout_abs_ns = get_abs_timeout(delta);
/* Get an event anyway, even if the timeout is already expired */
single.flags = 0;
ret = HYPERVISOR_vcpu_op(VCPUOP_set_singleshot_timer, cpu, &single);
BUG_ON(ret != 0);
return ret;
}
static const struct clock_event_device xen_vcpuop_clockevent = {
.name = "xen",
.features = CLOCK_EVT_FEAT_ONESHOT,
.max_delta_ns = 0xffffffff,
.min_delta_ns = TIMER_SLOP,
.mult = 1,
.shift = 0,
.rating = 500,
.set_state_shutdown = xen_vcpuop_shutdown,
.set_state_oneshot = xen_vcpuop_set_oneshot,
.set_next_event = xen_vcpuop_set_next_event,
};
static const struct clock_event_device *xen_clockevent =
&xen_timerop_clockevent;
struct xen_clock_event_device {
struct clock_event_device evt;
char name[16];
};
static DEFINE_PER_CPU(struct xen_clock_event_device, xen_clock_events) = { .evt.irq = -1 };
static irqreturn_t xen_timer_interrupt(int irq, void *dev_id)
{
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-18 01:30:40 +08:00
struct clock_event_device *evt = this_cpu_ptr(&xen_clock_events.evt);
irqreturn_t ret;
ret = IRQ_NONE;
if (evt->event_handler) {
evt->event_handler(evt);
ret = IRQ_HANDLED;
}
do_stolen_accounting();
return ret;
}
void xen_teardown_timer(int cpu)
{
struct clock_event_device *evt;
BUG_ON(cpu == 0);
evt = &per_cpu(xen_clock_events, cpu).evt;
if (evt->irq >= 0) {
unbind_from_irqhandler(evt->irq, NULL);
evt->irq = -1;
}
}
void xen_setup_timer(int cpu)
{
struct xen_clock_event_device *xevt = &per_cpu(xen_clock_events, cpu);
struct clock_event_device *evt = &xevt->evt;
int irq;
WARN(evt->irq >= 0, "IRQ%d for CPU%d is already allocated\n", evt->irq, cpu);
if (evt->irq >= 0)
xen_teardown_timer(cpu);
printk(KERN_INFO "installing Xen timer for CPU %d\n", cpu);
snprintf(xevt->name, sizeof(xevt->name), "timer%d", cpu);
irq = bind_virq_to_irqhandler(VIRQ_TIMER, cpu, xen_timer_interrupt,
IRQF_PERCPU|IRQF_NOBALANCING|IRQF_TIMER|
IRQF_FORCE_RESUME|IRQF_EARLY_RESUME,
xevt->name, NULL);
(void)xen_set_irq_priority(irq, XEN_IRQ_PRIORITY_MAX);
memcpy(evt, xen_clockevent, sizeof(*evt));
evt->cpumask = cpumask_of(cpu);
evt->irq = irq;
}
void xen_setup_cpu_clockevents(void)
{
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-18 01:30:40 +08:00
clockevents_register_device(this_cpu_ptr(&xen_clock_events.evt));
}
void xen_timer_resume(void)
{
int cpu;
pvclock_resume();
if (xen_clockevent != &xen_vcpuop_clockevent)
return;
for_each_online_cpu(cpu) {
if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL))
BUG();
}
}
static const struct pv_time_ops xen_time_ops __initconst = {
.sched_clock = xen_clocksource_read,
};
static void __init xen_time_init(void)
{
int cpu = smp_processor_id();
struct timespec tp;
/* As Dom0 is never moved, no penalty on using TSC there */
if (xen_initial_domain())
xen_clocksource.rating = 275;
clocksource_register_hz(&xen_clocksource, NSEC_PER_SEC);
if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL) == 0) {
/* Successfully turned off 100Hz tick, so we have the
vcpuop-based timer interface */
printk(KERN_DEBUG "Xen: using vcpuop timer interface\n");
xen_clockevent = &xen_vcpuop_clockevent;
}
/* Set initial system time with full resolution */
xen_read_wallclock(&tp);
do_settimeofday(&tp);
setup_force_cpu_cap(X86_FEATURE_TSC);
xen_setup_runstate_info(cpu);
xen_setup_timer(cpu);
xen_setup_cpu_clockevents();
if (xen_initial_domain())
pvclock_gtod_register_notifier(&xen_pvclock_gtod_notifier);
}
void __init xen_init_time_ops(void)
{
pv_time_ops = xen_time_ops;
x86_init.timers.timer_init = xen_time_init;
x86_init.timers.setup_percpu_clockev = x86_init_noop;
x86_cpuinit.setup_percpu_clockev = x86_init_noop;
x86_platform.calibrate_tsc = xen_tsc_khz;
x86_platform.get_wallclock = xen_get_wallclock;
x86: xen: Sync the CMOS RTC as well as the Xen wallclock Adjustments to Xen's persistent clock via update_persistent_clock() don't actually persist, as the Xen wallclock is a software only clock and modifications to it do not modify the underlying CMOS RTC. The x86_platform.set_wallclock hook is there to keep the hardware RTC synchronized. On a guest this is pointless. On Dom0 we can use the native implementaion which actually updates the hardware RTC, but we still need to keep the software emulation of RTC for the guests up to date. The subscription to the pvclock_notifier allows us to emulate this easily. The notifier is called at every tick and when the clock was set. Right now we only use that notifier when the clock was set, but due to the fact that it is called periodically from the timekeeping update code, we can utilize it to emulate the NTP driven drift compensation of update_persistant_clock() for the Xen wall (software) clock. Add a 11 minutes periodic update to the pvclock_gtod notifier callback to achieve that. The static variable 'next' which maintains that 11 minutes update cycle is protected by the core code serialization so there is no need to add a Xen specific serialization mechanism. [ tglx: Massaged changelog and added a few comments ] Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: John Stultz <john.stultz@linaro.org> Cc: <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/1372329348-20841-6-git-send-email-david.vrabel@citrix.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-27 18:35:48 +08:00
/* Dom0 uses the native method to set the hardware RTC. */
if (!xen_initial_domain())
x86_platform.set_wallclock = xen_set_wallclock;
}
#ifdef CONFIG_XEN_PVHVM
static void xen_hvm_setup_cpu_clockevents(void)
{
int cpu = smp_processor_id();
xen_setup_runstate_info(cpu);
/*
* xen_setup_timer(cpu) - snprintf is bad in atomic context. Hence
* doing it xen_hvm_cpu_notify (which gets called by smp_init during
* early bootup and also during CPU hotplug events).
*/
xen_setup_cpu_clockevents();
}
void __init xen_hvm_init_time_ops(void)
{
/* vector callback is needed otherwise we cannot receive interrupts
* on cpu > 0 and at this point we don't know how many cpus are
* available */
if (!xen_have_vector_callback)
return;
if (!xen_feature(XENFEAT_hvm_safe_pvclock)) {
printk(KERN_INFO "Xen doesn't support pvclock on HVM,"
"disable pv timer\n");
return;
}
pv_time_ops = xen_time_ops;
x86_init.timers.setup_percpu_clockev = xen_time_init;
x86_cpuinit.setup_percpu_clockev = xen_hvm_setup_cpu_clockevents;
x86_platform.calibrate_tsc = xen_tsc_khz;
x86_platform.get_wallclock = xen_get_wallclock;
x86_platform.set_wallclock = xen_set_wallclock;
}
#endif