OpenCloudOS-Kernel/block/blk-softirq.c

162 lines
3.8 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* Functions related to softirq rq completions
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/bio.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
#include <linux/cpu.h>
#include <linux/sched.h>
#include <linux/sched/topology.h>
#include "blk.h"
static DEFINE_PER_CPU(struct list_head, blk_cpu_done);
/*
* Softirq action handler - move entries to local list and loop over them
* while passing them to the queue registered handler.
*/
static __latent_entropy void blk_done_softirq(struct softirq_action *h)
{
struct list_head *cpu_list, local_list;
local_irq_disable();
block: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to this_cpu_inc(y) Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-16 02:22:29 +08:00
cpu_list = this_cpu_ptr(&blk_cpu_done);
list_replace_init(cpu_list, &local_list);
local_irq_enable();
while (!list_empty(&local_list)) {
struct request *rq;
block: fix regression with block enabled tagging Martin reported that his test system would not boot with current git, it oopsed with this: BUG: unable to handle kernel paging request at ffff88046c6c9e80 IP: [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 PGD 1ddf067 PUD 1de2067 PMD 47fc7d067 PTE 800000046c6c9060 Oops: 0002 [#1] SMP DEBUG_PAGEALLOC Modules linked in: sd_mod lpfc(+) scsi_transport_fc scsi_tgt oracleasm rpcsec_gss_krb5 ipv6 igb dca i2c_algo_bit i2c_core hwmon CPU: 3 PID: 87 Comm: kworker/u17:1 Not tainted 3.14.0+ #246 Hardware name: Supermicro X9DRX+-F/X9DRX+-F, BIOS 3.00 07/09/2013 Workqueue: events_unbound async_run_entry_fn task: ffff8802743c2150 ti: ffff880273d02000 task.ti: ffff880273d02000 RIP: 0010:[<ffffffff812971e0>] [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 RSP: 0018:ffff880273d03a58 EFLAGS: 00010092 RAX: ffff88046c6c9e78 RBX: ffff880077208e78 RCX: 00000000fffc8da6 RDX: 00000000fffc186d RSI: 0000000000000009 RDI: 00000000fffc8d9d RBP: ffff880273d03a88 R08: 0000000000000001 R09: ffff8800021c2410 R10: 0000000000000005 R11: 0000000000015b30 R12: ffff88046c5bb8a0 R13: ffff88046c5c0890 R14: 000000000000001e R15: 000000000000001e FS: 0000000000000000(0000) GS:ffff880277b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff88046c6c9e80 CR3: 00000000018f6000 CR4: 00000000000407e0 Stack: ffff880273d03a98 ffff880474b18800 0000000000000000 ffff880474157000 ffff88046c5c0890 ffff880077208e78 ffff880273d03ae8 ffffffff813b9e62 ffff880200000010 ffff880474b18968 ffff880474b18848 ffff88046c5c0cd8 Call Trace: [<ffffffff813b9e62>] scsi_request_fn+0xf2/0x510 [<ffffffff81293167>] __blk_run_queue+0x37/0x50 [<ffffffff8129ac43>] blk_execute_rq_nowait+0xb3/0x130 [<ffffffff8129ad24>] blk_execute_rq+0x64/0xf0 [<ffffffff8108d2b0>] ? bit_waitqueue+0xd0/0xd0 [<ffffffff813bba35>] scsi_execute+0xe5/0x180 [<ffffffff813bbe4a>] scsi_execute_req_flags+0x9a/0x110 [<ffffffffa01b1304>] sd_spinup_disk+0x94/0x460 [sd_mod] [<ffffffff81160000>] ? __unmap_hugepage_range+0x200/0x2f0 [<ffffffffa01b2b9a>] sd_revalidate_disk+0xaa/0x3f0 [sd_mod] [<ffffffffa01b2fb8>] sd_probe_async+0xd8/0x200 [sd_mod] [<ffffffff8107703f>] async_run_entry_fn+0x3f/0x140 [<ffffffff8106a1c5>] process_one_work+0x175/0x410 [<ffffffff8106b373>] worker_thread+0x123/0x400 [<ffffffff8106b250>] ? manage_workers+0x160/0x160 [<ffffffff8107104e>] kthread+0xce/0xf0 [<ffffffff81070f80>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff815f0bac>] ret_from_fork+0x7c/0xb0 [<ffffffff81070f80>] ? kthread_freezable_should_stop+0x70/0x70 Code: 48 0f ab 11 72 db 48 81 4b 40 00 00 10 00 89 83 08 01 00 00 48 89 df 49 8b 04 24 48 89 1c d0 e8 f7 a8 ff ff 49 8b 85 28 05 00 00 <48> 89 58 08 48 89 03 49 8d 85 28 05 00 00 48 89 43 08 49 89 9d RIP [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 RSP <ffff880273d03a58> CR2: ffff88046c6c9e80 Martin bisected and found this to be the problem patch; commit 6d113398dcf4dfcd9787a4ead738b186f7b7ff0f Author: Jan Kara <jack@suse.cz> Date: Mon Feb 24 16:39:54 2014 +0100 block: Stop abusing rq->csd.list in blk-softirq and the problem was immediately apparent. The patch states that it is safe to reuse queuelist at completion time, since it is no longer used. However, that is not true if a device is using block enabled tagging. If that is the case, then the queuelist is reused to keep track of busy tags. If a device also ended up using softirq completions, we'd reuse ->queuelist for the IPI handling while block tagging was still using it. Boom. Fix this by adding a new ipi_list list head, and share the memory used with the request hash table. The hash table is never used after the request is moved to the dispatch list, which happens long before any potential completion of the request. Add a new request bit for this, so we don't have cases that check rq->hash while it could potentially have been reused for the IPI completion. Reported-by: Martin K. Petersen <martin.petersen@oracle.com> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-10 10:27:01 +08:00
rq = list_entry(local_list.next, struct request, ipi_list);
list_del_init(&rq->ipi_list);
rq->q->mq_ops->complete(rq);
}
}
#ifdef CONFIG_SMP
static void trigger_softirq(void *data)
{
struct request *rq = data;
unsigned long flags;
struct list_head *list;
local_irq_save(flags);
block: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to this_cpu_inc(y) Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-16 02:22:29 +08:00
list = this_cpu_ptr(&blk_cpu_done);
block: fix regression with block enabled tagging Martin reported that his test system would not boot with current git, it oopsed with this: BUG: unable to handle kernel paging request at ffff88046c6c9e80 IP: [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 PGD 1ddf067 PUD 1de2067 PMD 47fc7d067 PTE 800000046c6c9060 Oops: 0002 [#1] SMP DEBUG_PAGEALLOC Modules linked in: sd_mod lpfc(+) scsi_transport_fc scsi_tgt oracleasm rpcsec_gss_krb5 ipv6 igb dca i2c_algo_bit i2c_core hwmon CPU: 3 PID: 87 Comm: kworker/u17:1 Not tainted 3.14.0+ #246 Hardware name: Supermicro X9DRX+-F/X9DRX+-F, BIOS 3.00 07/09/2013 Workqueue: events_unbound async_run_entry_fn task: ffff8802743c2150 ti: ffff880273d02000 task.ti: ffff880273d02000 RIP: 0010:[<ffffffff812971e0>] [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 RSP: 0018:ffff880273d03a58 EFLAGS: 00010092 RAX: ffff88046c6c9e78 RBX: ffff880077208e78 RCX: 00000000fffc8da6 RDX: 00000000fffc186d RSI: 0000000000000009 RDI: 00000000fffc8d9d RBP: ffff880273d03a88 R08: 0000000000000001 R09: ffff8800021c2410 R10: 0000000000000005 R11: 0000000000015b30 R12: ffff88046c5bb8a0 R13: ffff88046c5c0890 R14: 000000000000001e R15: 000000000000001e FS: 0000000000000000(0000) GS:ffff880277b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff88046c6c9e80 CR3: 00000000018f6000 CR4: 00000000000407e0 Stack: ffff880273d03a98 ffff880474b18800 0000000000000000 ffff880474157000 ffff88046c5c0890 ffff880077208e78 ffff880273d03ae8 ffffffff813b9e62 ffff880200000010 ffff880474b18968 ffff880474b18848 ffff88046c5c0cd8 Call Trace: [<ffffffff813b9e62>] scsi_request_fn+0xf2/0x510 [<ffffffff81293167>] __blk_run_queue+0x37/0x50 [<ffffffff8129ac43>] blk_execute_rq_nowait+0xb3/0x130 [<ffffffff8129ad24>] blk_execute_rq+0x64/0xf0 [<ffffffff8108d2b0>] ? bit_waitqueue+0xd0/0xd0 [<ffffffff813bba35>] scsi_execute+0xe5/0x180 [<ffffffff813bbe4a>] scsi_execute_req_flags+0x9a/0x110 [<ffffffffa01b1304>] sd_spinup_disk+0x94/0x460 [sd_mod] [<ffffffff81160000>] ? __unmap_hugepage_range+0x200/0x2f0 [<ffffffffa01b2b9a>] sd_revalidate_disk+0xaa/0x3f0 [sd_mod] [<ffffffffa01b2fb8>] sd_probe_async+0xd8/0x200 [sd_mod] [<ffffffff8107703f>] async_run_entry_fn+0x3f/0x140 [<ffffffff8106a1c5>] process_one_work+0x175/0x410 [<ffffffff8106b373>] worker_thread+0x123/0x400 [<ffffffff8106b250>] ? manage_workers+0x160/0x160 [<ffffffff8107104e>] kthread+0xce/0xf0 [<ffffffff81070f80>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff815f0bac>] ret_from_fork+0x7c/0xb0 [<ffffffff81070f80>] ? kthread_freezable_should_stop+0x70/0x70 Code: 48 0f ab 11 72 db 48 81 4b 40 00 00 10 00 89 83 08 01 00 00 48 89 df 49 8b 04 24 48 89 1c d0 e8 f7 a8 ff ff 49 8b 85 28 05 00 00 <48> 89 58 08 48 89 03 49 8d 85 28 05 00 00 48 89 43 08 49 89 9d RIP [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 RSP <ffff880273d03a58> CR2: ffff88046c6c9e80 Martin bisected and found this to be the problem patch; commit 6d113398dcf4dfcd9787a4ead738b186f7b7ff0f Author: Jan Kara <jack@suse.cz> Date: Mon Feb 24 16:39:54 2014 +0100 block: Stop abusing rq->csd.list in blk-softirq and the problem was immediately apparent. The patch states that it is safe to reuse queuelist at completion time, since it is no longer used. However, that is not true if a device is using block enabled tagging. If that is the case, then the queuelist is reused to keep track of busy tags. If a device also ended up using softirq completions, we'd reuse ->queuelist for the IPI handling while block tagging was still using it. Boom. Fix this by adding a new ipi_list list head, and share the memory used with the request hash table. The hash table is never used after the request is moved to the dispatch list, which happens long before any potential completion of the request. Add a new request bit for this, so we don't have cases that check rq->hash while it could potentially have been reused for the IPI completion. Reported-by: Martin K. Petersen <martin.petersen@oracle.com> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-10 10:27:01 +08:00
list_add_tail(&rq->ipi_list, list);
block: fix regression with block enabled tagging Martin reported that his test system would not boot with current git, it oopsed with this: BUG: unable to handle kernel paging request at ffff88046c6c9e80 IP: [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 PGD 1ddf067 PUD 1de2067 PMD 47fc7d067 PTE 800000046c6c9060 Oops: 0002 [#1] SMP DEBUG_PAGEALLOC Modules linked in: sd_mod lpfc(+) scsi_transport_fc scsi_tgt oracleasm rpcsec_gss_krb5 ipv6 igb dca i2c_algo_bit i2c_core hwmon CPU: 3 PID: 87 Comm: kworker/u17:1 Not tainted 3.14.0+ #246 Hardware name: Supermicro X9DRX+-F/X9DRX+-F, BIOS 3.00 07/09/2013 Workqueue: events_unbound async_run_entry_fn task: ffff8802743c2150 ti: ffff880273d02000 task.ti: ffff880273d02000 RIP: 0010:[<ffffffff812971e0>] [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 RSP: 0018:ffff880273d03a58 EFLAGS: 00010092 RAX: ffff88046c6c9e78 RBX: ffff880077208e78 RCX: 00000000fffc8da6 RDX: 00000000fffc186d RSI: 0000000000000009 RDI: 00000000fffc8d9d RBP: ffff880273d03a88 R08: 0000000000000001 R09: ffff8800021c2410 R10: 0000000000000005 R11: 0000000000015b30 R12: ffff88046c5bb8a0 R13: ffff88046c5c0890 R14: 000000000000001e R15: 000000000000001e FS: 0000000000000000(0000) GS:ffff880277b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff88046c6c9e80 CR3: 00000000018f6000 CR4: 00000000000407e0 Stack: ffff880273d03a98 ffff880474b18800 0000000000000000 ffff880474157000 ffff88046c5c0890 ffff880077208e78 ffff880273d03ae8 ffffffff813b9e62 ffff880200000010 ffff880474b18968 ffff880474b18848 ffff88046c5c0cd8 Call Trace: [<ffffffff813b9e62>] scsi_request_fn+0xf2/0x510 [<ffffffff81293167>] __blk_run_queue+0x37/0x50 [<ffffffff8129ac43>] blk_execute_rq_nowait+0xb3/0x130 [<ffffffff8129ad24>] blk_execute_rq+0x64/0xf0 [<ffffffff8108d2b0>] ? bit_waitqueue+0xd0/0xd0 [<ffffffff813bba35>] scsi_execute+0xe5/0x180 [<ffffffff813bbe4a>] scsi_execute_req_flags+0x9a/0x110 [<ffffffffa01b1304>] sd_spinup_disk+0x94/0x460 [sd_mod] [<ffffffff81160000>] ? __unmap_hugepage_range+0x200/0x2f0 [<ffffffffa01b2b9a>] sd_revalidate_disk+0xaa/0x3f0 [sd_mod] [<ffffffffa01b2fb8>] sd_probe_async+0xd8/0x200 [sd_mod] [<ffffffff8107703f>] async_run_entry_fn+0x3f/0x140 [<ffffffff8106a1c5>] process_one_work+0x175/0x410 [<ffffffff8106b373>] worker_thread+0x123/0x400 [<ffffffff8106b250>] ? manage_workers+0x160/0x160 [<ffffffff8107104e>] kthread+0xce/0xf0 [<ffffffff81070f80>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff815f0bac>] ret_from_fork+0x7c/0xb0 [<ffffffff81070f80>] ? kthread_freezable_should_stop+0x70/0x70 Code: 48 0f ab 11 72 db 48 81 4b 40 00 00 10 00 89 83 08 01 00 00 48 89 df 49 8b 04 24 48 89 1c d0 e8 f7 a8 ff ff 49 8b 85 28 05 00 00 <48> 89 58 08 48 89 03 49 8d 85 28 05 00 00 48 89 43 08 49 89 9d RIP [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 RSP <ffff880273d03a58> CR2: ffff88046c6c9e80 Martin bisected and found this to be the problem patch; commit 6d113398dcf4dfcd9787a4ead738b186f7b7ff0f Author: Jan Kara <jack@suse.cz> Date: Mon Feb 24 16:39:54 2014 +0100 block: Stop abusing rq->csd.list in blk-softirq and the problem was immediately apparent. The patch states that it is safe to reuse queuelist at completion time, since it is no longer used. However, that is not true if a device is using block enabled tagging. If that is the case, then the queuelist is reused to keep track of busy tags. If a device also ended up using softirq completions, we'd reuse ->queuelist for the IPI handling while block tagging was still using it. Boom. Fix this by adding a new ipi_list list head, and share the memory used with the request hash table. The hash table is never used after the request is moved to the dispatch list, which happens long before any potential completion of the request. Add a new request bit for this, so we don't have cases that check rq->hash while it could potentially have been reused for the IPI completion. Reported-by: Martin K. Petersen <martin.petersen@oracle.com> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-10 10:27:01 +08:00
if (list->next == &rq->ipi_list)
raise_softirq_irqoff(BLOCK_SOFTIRQ);
local_irq_restore(flags);
}
/*
* Setup and invoke a run of 'trigger_softirq' on the given cpu.
*/
static int raise_blk_irq(int cpu, struct request *rq)
{
if (cpu_online(cpu)) {
smp: Avoid using two cache lines for struct call_single_data struct call_single_data is used in IPIs to transfer information between CPUs. Its size is bigger than sizeof(unsigned long) and less than cache line size. Currently it is not allocated with any explicit alignment requirements. This makes it possible for allocated call_single_data to cross two cache lines, which results in double the number of the cache lines that need to be transferred among CPUs. This can be fixed by requiring call_single_data to be aligned with the size of call_single_data. Currently the size of call_single_data is the power of 2. If we add new fields to call_single_data, we may need to add padding to make sure the size of new definition is the power of 2 as well. Fortunately, this is enforced by GCC, which will report bad sizes. To set alignment requirements of call_single_data to the size of call_single_data, a struct definition and a typedef is used. To test the effect of the patch, I used the vm-scalability multiple thread swap test case (swap-w-seq-mt). The test will create multiple threads and each thread will eat memory until all RAM and part of swap is used, so that huge number of IPIs are triggered when unmapping memory. In the test, the throughput of memory writing improves ~5% compared with misaligned call_single_data, because of faster IPIs. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Huang, Ying <ying.huang@intel.com> [ Add call_single_data_t and align with size of call_single_data. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/87bmnqd6lz.fsf@yhuang-mobile.sh.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-08 12:30:00 +08:00
call_single_data_t *data = &rq->csd;
data->func = trigger_softirq;
data->info = rq;
data->flags = 0;
smp_call_function_single_async(cpu, data);
return 0;
}
return 1;
}
#else /* CONFIG_SMP */
static int raise_blk_irq(int cpu, struct request *rq)
{
return 1;
}
#endif
static int blk_softirq_cpu_dead(unsigned int cpu)
{
/*
* If a CPU goes away, splice its entries to the current CPU
* and trigger a run of the softirq
*/
local_irq_disable();
list_splice_init(&per_cpu(blk_cpu_done, cpu),
this_cpu_ptr(&blk_cpu_done));
raise_softirq_irqoff(BLOCK_SOFTIRQ);
local_irq_enable();
return 0;
}
void __blk_complete_request(struct request *req)
{
struct request_queue *q = req->q;
int cpu, ccpu = q->mq_ops ? req->mq_ctx->cpu : req->cpu;
unsigned long flags;
bool shared = false;
BUG_ON(!q->mq_ops->complete);
local_irq_save(flags);
cpu = smp_processor_id();
/*
* Select completion CPU
*/
if (test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags) && ccpu != -1) {
if (!test_bit(QUEUE_FLAG_SAME_FORCE, &q->queue_flags))
shared = cpus_share_cache(cpu, ccpu);
} else
ccpu = cpu;
/*
* If current CPU and requested CPU share a cache, run the softirq on
* the current CPU. One might concern this is just like
* QUEUE_FLAG_SAME_FORCE, but actually not. blk_complete_request() is
* running in interrupt handler, and currently I/O controller doesn't
* support multiple interrupts, so current CPU is unique actually. This
* avoids IPI sending from current CPU to the first CPU of a group.
*/
if (ccpu == cpu || shared) {
struct list_head *list;
do_local:
block: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to this_cpu_inc(y) Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-16 02:22:29 +08:00
list = this_cpu_ptr(&blk_cpu_done);
block: fix regression with block enabled tagging Martin reported that his test system would not boot with current git, it oopsed with this: BUG: unable to handle kernel paging request at ffff88046c6c9e80 IP: [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 PGD 1ddf067 PUD 1de2067 PMD 47fc7d067 PTE 800000046c6c9060 Oops: 0002 [#1] SMP DEBUG_PAGEALLOC Modules linked in: sd_mod lpfc(+) scsi_transport_fc scsi_tgt oracleasm rpcsec_gss_krb5 ipv6 igb dca i2c_algo_bit i2c_core hwmon CPU: 3 PID: 87 Comm: kworker/u17:1 Not tainted 3.14.0+ #246 Hardware name: Supermicro X9DRX+-F/X9DRX+-F, BIOS 3.00 07/09/2013 Workqueue: events_unbound async_run_entry_fn task: ffff8802743c2150 ti: ffff880273d02000 task.ti: ffff880273d02000 RIP: 0010:[<ffffffff812971e0>] [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 RSP: 0018:ffff880273d03a58 EFLAGS: 00010092 RAX: ffff88046c6c9e78 RBX: ffff880077208e78 RCX: 00000000fffc8da6 RDX: 00000000fffc186d RSI: 0000000000000009 RDI: 00000000fffc8d9d RBP: ffff880273d03a88 R08: 0000000000000001 R09: ffff8800021c2410 R10: 0000000000000005 R11: 0000000000015b30 R12: ffff88046c5bb8a0 R13: ffff88046c5c0890 R14: 000000000000001e R15: 000000000000001e FS: 0000000000000000(0000) GS:ffff880277b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff88046c6c9e80 CR3: 00000000018f6000 CR4: 00000000000407e0 Stack: ffff880273d03a98 ffff880474b18800 0000000000000000 ffff880474157000 ffff88046c5c0890 ffff880077208e78 ffff880273d03ae8 ffffffff813b9e62 ffff880200000010 ffff880474b18968 ffff880474b18848 ffff88046c5c0cd8 Call Trace: [<ffffffff813b9e62>] scsi_request_fn+0xf2/0x510 [<ffffffff81293167>] __blk_run_queue+0x37/0x50 [<ffffffff8129ac43>] blk_execute_rq_nowait+0xb3/0x130 [<ffffffff8129ad24>] blk_execute_rq+0x64/0xf0 [<ffffffff8108d2b0>] ? bit_waitqueue+0xd0/0xd0 [<ffffffff813bba35>] scsi_execute+0xe5/0x180 [<ffffffff813bbe4a>] scsi_execute_req_flags+0x9a/0x110 [<ffffffffa01b1304>] sd_spinup_disk+0x94/0x460 [sd_mod] [<ffffffff81160000>] ? __unmap_hugepage_range+0x200/0x2f0 [<ffffffffa01b2b9a>] sd_revalidate_disk+0xaa/0x3f0 [sd_mod] [<ffffffffa01b2fb8>] sd_probe_async+0xd8/0x200 [sd_mod] [<ffffffff8107703f>] async_run_entry_fn+0x3f/0x140 [<ffffffff8106a1c5>] process_one_work+0x175/0x410 [<ffffffff8106b373>] worker_thread+0x123/0x400 [<ffffffff8106b250>] ? manage_workers+0x160/0x160 [<ffffffff8107104e>] kthread+0xce/0xf0 [<ffffffff81070f80>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff815f0bac>] ret_from_fork+0x7c/0xb0 [<ffffffff81070f80>] ? kthread_freezable_should_stop+0x70/0x70 Code: 48 0f ab 11 72 db 48 81 4b 40 00 00 10 00 89 83 08 01 00 00 48 89 df 49 8b 04 24 48 89 1c d0 e8 f7 a8 ff ff 49 8b 85 28 05 00 00 <48> 89 58 08 48 89 03 49 8d 85 28 05 00 00 48 89 43 08 49 89 9d RIP [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 RSP <ffff880273d03a58> CR2: ffff88046c6c9e80 Martin bisected and found this to be the problem patch; commit 6d113398dcf4dfcd9787a4ead738b186f7b7ff0f Author: Jan Kara <jack@suse.cz> Date: Mon Feb 24 16:39:54 2014 +0100 block: Stop abusing rq->csd.list in blk-softirq and the problem was immediately apparent. The patch states that it is safe to reuse queuelist at completion time, since it is no longer used. However, that is not true if a device is using block enabled tagging. If that is the case, then the queuelist is reused to keep track of busy tags. If a device also ended up using softirq completions, we'd reuse ->queuelist for the IPI handling while block tagging was still using it. Boom. Fix this by adding a new ipi_list list head, and share the memory used with the request hash table. The hash table is never used after the request is moved to the dispatch list, which happens long before any potential completion of the request. Add a new request bit for this, so we don't have cases that check rq->hash while it could potentially have been reused for the IPI completion. Reported-by: Martin K. Petersen <martin.petersen@oracle.com> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-10 10:27:01 +08:00
list_add_tail(&req->ipi_list, list);
/*
* if the list only contains our just added request,
* signal a raise of the softirq. If there are already
* entries there, someone already raised the irq but it
* hasn't run yet.
*/
block: fix regression with block enabled tagging Martin reported that his test system would not boot with current git, it oopsed with this: BUG: unable to handle kernel paging request at ffff88046c6c9e80 IP: [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 PGD 1ddf067 PUD 1de2067 PMD 47fc7d067 PTE 800000046c6c9060 Oops: 0002 [#1] SMP DEBUG_PAGEALLOC Modules linked in: sd_mod lpfc(+) scsi_transport_fc scsi_tgt oracleasm rpcsec_gss_krb5 ipv6 igb dca i2c_algo_bit i2c_core hwmon CPU: 3 PID: 87 Comm: kworker/u17:1 Not tainted 3.14.0+ #246 Hardware name: Supermicro X9DRX+-F/X9DRX+-F, BIOS 3.00 07/09/2013 Workqueue: events_unbound async_run_entry_fn task: ffff8802743c2150 ti: ffff880273d02000 task.ti: ffff880273d02000 RIP: 0010:[<ffffffff812971e0>] [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 RSP: 0018:ffff880273d03a58 EFLAGS: 00010092 RAX: ffff88046c6c9e78 RBX: ffff880077208e78 RCX: 00000000fffc8da6 RDX: 00000000fffc186d RSI: 0000000000000009 RDI: 00000000fffc8d9d RBP: ffff880273d03a88 R08: 0000000000000001 R09: ffff8800021c2410 R10: 0000000000000005 R11: 0000000000015b30 R12: ffff88046c5bb8a0 R13: ffff88046c5c0890 R14: 000000000000001e R15: 000000000000001e FS: 0000000000000000(0000) GS:ffff880277b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff88046c6c9e80 CR3: 00000000018f6000 CR4: 00000000000407e0 Stack: ffff880273d03a98 ffff880474b18800 0000000000000000 ffff880474157000 ffff88046c5c0890 ffff880077208e78 ffff880273d03ae8 ffffffff813b9e62 ffff880200000010 ffff880474b18968 ffff880474b18848 ffff88046c5c0cd8 Call Trace: [<ffffffff813b9e62>] scsi_request_fn+0xf2/0x510 [<ffffffff81293167>] __blk_run_queue+0x37/0x50 [<ffffffff8129ac43>] blk_execute_rq_nowait+0xb3/0x130 [<ffffffff8129ad24>] blk_execute_rq+0x64/0xf0 [<ffffffff8108d2b0>] ? bit_waitqueue+0xd0/0xd0 [<ffffffff813bba35>] scsi_execute+0xe5/0x180 [<ffffffff813bbe4a>] scsi_execute_req_flags+0x9a/0x110 [<ffffffffa01b1304>] sd_spinup_disk+0x94/0x460 [sd_mod] [<ffffffff81160000>] ? __unmap_hugepage_range+0x200/0x2f0 [<ffffffffa01b2b9a>] sd_revalidate_disk+0xaa/0x3f0 [sd_mod] [<ffffffffa01b2fb8>] sd_probe_async+0xd8/0x200 [sd_mod] [<ffffffff8107703f>] async_run_entry_fn+0x3f/0x140 [<ffffffff8106a1c5>] process_one_work+0x175/0x410 [<ffffffff8106b373>] worker_thread+0x123/0x400 [<ffffffff8106b250>] ? manage_workers+0x160/0x160 [<ffffffff8107104e>] kthread+0xce/0xf0 [<ffffffff81070f80>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff815f0bac>] ret_from_fork+0x7c/0xb0 [<ffffffff81070f80>] ? kthread_freezable_should_stop+0x70/0x70 Code: 48 0f ab 11 72 db 48 81 4b 40 00 00 10 00 89 83 08 01 00 00 48 89 df 49 8b 04 24 48 89 1c d0 e8 f7 a8 ff ff 49 8b 85 28 05 00 00 <48> 89 58 08 48 89 03 49 8d 85 28 05 00 00 48 89 43 08 49 89 9d RIP [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 RSP <ffff880273d03a58> CR2: ffff88046c6c9e80 Martin bisected and found this to be the problem patch; commit 6d113398dcf4dfcd9787a4ead738b186f7b7ff0f Author: Jan Kara <jack@suse.cz> Date: Mon Feb 24 16:39:54 2014 +0100 block: Stop abusing rq->csd.list in blk-softirq and the problem was immediately apparent. The patch states that it is safe to reuse queuelist at completion time, since it is no longer used. However, that is not true if a device is using block enabled tagging. If that is the case, then the queuelist is reused to keep track of busy tags. If a device also ended up using softirq completions, we'd reuse ->queuelist for the IPI handling while block tagging was still using it. Boom. Fix this by adding a new ipi_list list head, and share the memory used with the request hash table. The hash table is never used after the request is moved to the dispatch list, which happens long before any potential completion of the request. Add a new request bit for this, so we don't have cases that check rq->hash while it could potentially have been reused for the IPI completion. Reported-by: Martin K. Petersen <martin.petersen@oracle.com> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-10 10:27:01 +08:00
if (list->next == &req->ipi_list)
raise_softirq_irqoff(BLOCK_SOFTIRQ);
} else if (raise_blk_irq(ccpu, req))
goto do_local;
local_irq_restore(flags);
}
EXPORT_SYMBOL(__blk_complete_request);
static __init int blk_softirq_init(void)
{
int i;
for_each_possible_cpu(i)
INIT_LIST_HEAD(&per_cpu(blk_cpu_done, i));
open_softirq(BLOCK_SOFTIRQ, blk_done_softirq);
cpuhp_setup_state_nocalls(CPUHP_BLOCK_SOFTIRQ_DEAD,
"block/softirq:dead", NULL,
blk_softirq_cpu_dead);
return 0;
}
subsys_initcall(blk_softirq_init);