2013-08-14 21:38:20 +08:00
|
|
|
/*
|
|
|
|
|
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
|
* Based on "omap4.dtsi"
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
|
#include <dt-bindings/pinctrl/dra.h>
|
|
|
|
|
|
|
|
|
|
#include "skeleton.dtsi"
|
|
|
|
|
|
|
|
|
|
/ {
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
|
|
|
|
|
compatible = "ti,dra7xx";
|
|
|
|
|
interrupt-parent = <&gic>;
|
|
|
|
|
|
|
|
|
|
aliases {
|
2013-10-17 04:21:03 +08:00
|
|
|
i2c0 = &i2c1;
|
|
|
|
|
i2c1 = &i2c2;
|
|
|
|
|
i2c2 = &i2c3;
|
|
|
|
|
i2c3 = &i2c4;
|
|
|
|
|
i2c4 = &i2c5;
|
2013-08-14 21:38:20 +08:00
|
|
|
serial0 = &uart1;
|
|
|
|
|
serial1 = &uart2;
|
|
|
|
|
serial2 = &uart3;
|
|
|
|
|
serial3 = &uart4;
|
|
|
|
|
serial4 = &uart5;
|
|
|
|
|
serial5 = &uart6;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
timer {
|
|
|
|
|
compatible = "arm,armv7-timer";
|
|
|
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
gic: interrupt-controller@48211000 {
|
|
|
|
|
compatible = "arm,cortex-a15-gic";
|
|
|
|
|
interrupt-controller;
|
|
|
|
|
#interrupt-cells = <3>;
|
|
|
|
|
reg = <0x48211000 0x1000>,
|
|
|
|
|
<0x48212000 0x1000>,
|
|
|
|
|
<0x48214000 0x2000>,
|
|
|
|
|
<0x48216000 0x2000>;
|
|
|
|
|
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/*
|
2014-03-28 18:11:37 +08:00
|
|
|
* The soc node represents the soc top level view. It is used for IPs
|
2013-08-14 21:38:20 +08:00
|
|
|
* that are not memory mapped in the MPU view or for the MPU itself.
|
|
|
|
|
*/
|
|
|
|
|
soc {
|
|
|
|
|
compatible = "ti,omap-infra";
|
|
|
|
|
mpu {
|
|
|
|
|
compatible = "ti,omap5-mpu";
|
|
|
|
|
ti,hwmods = "mpu";
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* XXX: Use a flat representation of the SOC interconnect.
|
|
|
|
|
* The real OMAP interconnect network is quite complex.
|
2014-03-28 18:11:39 +08:00
|
|
|
* Since it will not bring real advantage to represent that in DT for
|
2013-08-14 21:38:20 +08:00
|
|
|
* the moment, just use a fake OCP bus entry to represent the whole bus
|
|
|
|
|
* hierarchy.
|
|
|
|
|
*/
|
|
|
|
|
ocp {
|
2014-04-11 00:34:32 +08:00
|
|
|
compatible = "ti,dra7-l3-noc", "simple-bus";
|
2013-08-14 21:38:20 +08:00
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
ranges;
|
|
|
|
|
ti,hwmods = "l3_main_1", "l3_main_2";
|
2014-04-11 00:34:32 +08:00
|
|
|
reg = <0x44000000 0x1000000>,
|
|
|
|
|
<0x45000000 0x1000>;
|
2013-08-14 21:38:20 +08:00
|
|
|
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
|
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
|
2013-07-18 22:18:33 +08:00
|
|
|
prm: prm@4ae06000 {
|
|
|
|
|
compatible = "ti,dra7-prm";
|
|
|
|
|
reg = <0x4ae06000 0x3000>;
|
|
|
|
|
|
|
|
|
|
prm_clocks: clocks {
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
prm_clockdomains: clockdomains {
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
cm_core_aon: cm_core_aon@4a005000 {
|
|
|
|
|
compatible = "ti,dra7-cm-core-aon";
|
|
|
|
|
reg = <0x4a005000 0x2000>;
|
|
|
|
|
|
|
|
|
|
cm_core_aon_clocks: clocks {
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
cm_core_aon_clockdomains: clockdomains {
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
cm_core: cm_core@4a008000 {
|
|
|
|
|
compatible = "ti,dra7-cm-core";
|
|
|
|
|
reg = <0x4a008000 0x3000>;
|
|
|
|
|
|
|
|
|
|
cm_core_clocks: clocks {
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
cm_core_clockdomains: clockdomains {
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
2013-08-14 21:38:20 +08:00
|
|
|
counter32k: counter@4ae04000 {
|
|
|
|
|
compatible = "ti,omap-counter32k";
|
|
|
|
|
reg = <0x4ae04000 0x40>;
|
|
|
|
|
ti,hwmods = "counter_32k";
|
|
|
|
|
};
|
|
|
|
|
|
2014-02-19 22:56:40 +08:00
|
|
|
dra7_ctrl_general: tisyscon@4a002e00 {
|
|
|
|
|
compatible = "syscon";
|
|
|
|
|
reg = <0x4a002e00 0x7c>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pbias_regulator: pbias_regulator {
|
|
|
|
|
compatible = "ti,pbias-omap";
|
|
|
|
|
reg = <0 0x4>;
|
|
|
|
|
syscon = <&dra7_ctrl_general>;
|
|
|
|
|
pbias_mmc_reg: pbias_mmc_omap5 {
|
|
|
|
|
regulator-name = "pbias_mmc_omap5";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
2013-08-14 21:38:20 +08:00
|
|
|
dra7_pmx_core: pinmux@4a003400 {
|
|
|
|
|
compatible = "pinctrl-single";
|
|
|
|
|
reg = <0x4a003400 0x0464>;
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
pinctrl-single,register-width = <32>;
|
|
|
|
|
pinctrl-single,function-mask = <0x3fffffff>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
sdma: dma-controller@4a056000 {
|
|
|
|
|
compatible = "ti,omap4430-sdma";
|
|
|
|
|
reg = <0x4a056000 0x1000>;
|
|
|
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
|
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
|
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
|
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
#dma-cells = <1>;
|
|
|
|
|
#dma-channels = <32>;
|
|
|
|
|
#dma-requests = <127>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
gpio1: gpio@4ae10000 {
|
|
|
|
|
compatible = "ti,omap4-gpio";
|
|
|
|
|
reg = <0x4ae10000 0x200>;
|
|
|
|
|
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "gpio1";
|
|
|
|
|
gpio-controller;
|
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
|
interrupt-controller;
|
|
|
|
|
#interrupt-cells = <1>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
gpio2: gpio@48055000 {
|
|
|
|
|
compatible = "ti,omap4-gpio";
|
|
|
|
|
reg = <0x48055000 0x200>;
|
|
|
|
|
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "gpio2";
|
|
|
|
|
gpio-controller;
|
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
|
interrupt-controller;
|
|
|
|
|
#interrupt-cells = <1>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
gpio3: gpio@48057000 {
|
|
|
|
|
compatible = "ti,omap4-gpio";
|
|
|
|
|
reg = <0x48057000 0x200>;
|
|
|
|
|
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "gpio3";
|
|
|
|
|
gpio-controller;
|
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
|
interrupt-controller;
|
|
|
|
|
#interrupt-cells = <1>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
gpio4: gpio@48059000 {
|
|
|
|
|
compatible = "ti,omap4-gpio";
|
|
|
|
|
reg = <0x48059000 0x200>;
|
|
|
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "gpio4";
|
|
|
|
|
gpio-controller;
|
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
|
interrupt-controller;
|
|
|
|
|
#interrupt-cells = <1>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
gpio5: gpio@4805b000 {
|
|
|
|
|
compatible = "ti,omap4-gpio";
|
|
|
|
|
reg = <0x4805b000 0x200>;
|
|
|
|
|
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "gpio5";
|
|
|
|
|
gpio-controller;
|
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
|
interrupt-controller;
|
|
|
|
|
#interrupt-cells = <1>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
gpio6: gpio@4805d000 {
|
|
|
|
|
compatible = "ti,omap4-gpio";
|
|
|
|
|
reg = <0x4805d000 0x200>;
|
|
|
|
|
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "gpio6";
|
|
|
|
|
gpio-controller;
|
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
|
interrupt-controller;
|
|
|
|
|
#interrupt-cells = <1>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
gpio7: gpio@48051000 {
|
|
|
|
|
compatible = "ti,omap4-gpio";
|
|
|
|
|
reg = <0x48051000 0x200>;
|
|
|
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "gpio7";
|
|
|
|
|
gpio-controller;
|
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
|
interrupt-controller;
|
|
|
|
|
#interrupt-cells = <1>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
gpio8: gpio@48053000 {
|
|
|
|
|
compatible = "ti,omap4-gpio";
|
|
|
|
|
reg = <0x48053000 0x200>;
|
|
|
|
|
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "gpio8";
|
|
|
|
|
gpio-controller;
|
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
|
interrupt-controller;
|
|
|
|
|
#interrupt-cells = <1>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
uart1: serial@4806a000 {
|
|
|
|
|
compatible = "ti,omap4-uart";
|
|
|
|
|
reg = <0x4806a000 0x100>;
|
|
|
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "uart1";
|
|
|
|
|
clock-frequency = <48000000>;
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
uart2: serial@4806c000 {
|
|
|
|
|
compatible = "ti,omap4-uart";
|
|
|
|
|
reg = <0x4806c000 0x100>;
|
|
|
|
|
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "uart2";
|
|
|
|
|
clock-frequency = <48000000>;
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
uart3: serial@48020000 {
|
|
|
|
|
compatible = "ti,omap4-uart";
|
|
|
|
|
reg = <0x48020000 0x100>;
|
|
|
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "uart3";
|
|
|
|
|
clock-frequency = <48000000>;
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
uart4: serial@4806e000 {
|
|
|
|
|
compatible = "ti,omap4-uart";
|
|
|
|
|
reg = <0x4806e000 0x100>;
|
|
|
|
|
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "uart4";
|
|
|
|
|
clock-frequency = <48000000>;
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
uart5: serial@48066000 {
|
|
|
|
|
compatible = "ti,omap4-uart";
|
|
|
|
|
reg = <0x48066000 0x100>;
|
|
|
|
|
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "uart5";
|
|
|
|
|
clock-frequency = <48000000>;
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
uart6: serial@48068000 {
|
|
|
|
|
compatible = "ti,omap4-uart";
|
|
|
|
|
reg = <0x48068000 0x100>;
|
|
|
|
|
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "uart6";
|
|
|
|
|
clock-frequency = <48000000>;
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
uart7: serial@48420000 {
|
|
|
|
|
compatible = "ti,omap4-uart";
|
|
|
|
|
reg = <0x48420000 0x100>;
|
|
|
|
|
ti,hwmods = "uart7";
|
|
|
|
|
clock-frequency = <48000000>;
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
uart8: serial@48422000 {
|
|
|
|
|
compatible = "ti,omap4-uart";
|
|
|
|
|
reg = <0x48422000 0x100>;
|
|
|
|
|
ti,hwmods = "uart8";
|
|
|
|
|
clock-frequency = <48000000>;
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
uart9: serial@48424000 {
|
|
|
|
|
compatible = "ti,omap4-uart";
|
|
|
|
|
reg = <0x48424000 0x100>;
|
|
|
|
|
ti,hwmods = "uart9";
|
|
|
|
|
clock-frequency = <48000000>;
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
uart10: serial@4ae2b000 {
|
|
|
|
|
compatible = "ti,omap4-uart";
|
|
|
|
|
reg = <0x4ae2b000 0x100>;
|
|
|
|
|
ti,hwmods = "uart10";
|
|
|
|
|
clock-frequency = <48000000>;
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
timer1: timer@4ae18000 {
|
|
|
|
|
compatible = "ti,omap5430-timer";
|
|
|
|
|
reg = <0x4ae18000 0x80>;
|
|
|
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "timer1";
|
|
|
|
|
ti,timer-alwon;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
timer2: timer@48032000 {
|
|
|
|
|
compatible = "ti,omap5430-timer";
|
|
|
|
|
reg = <0x48032000 0x80>;
|
|
|
|
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "timer2";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
timer3: timer@48034000 {
|
|
|
|
|
compatible = "ti,omap5430-timer";
|
|
|
|
|
reg = <0x48034000 0x80>;
|
|
|
|
|
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "timer3";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
timer4: timer@48036000 {
|
|
|
|
|
compatible = "ti,omap5430-timer";
|
|
|
|
|
reg = <0x48036000 0x80>;
|
|
|
|
|
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "timer4";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
timer5: timer@48820000 {
|
|
|
|
|
compatible = "ti,omap5430-timer";
|
|
|
|
|
reg = <0x48820000 0x80>;
|
|
|
|
|
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "timer5";
|
|
|
|
|
ti,timer-dsp;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
timer6: timer@48822000 {
|
|
|
|
|
compatible = "ti,omap5430-timer";
|
|
|
|
|
reg = <0x48822000 0x80>;
|
|
|
|
|
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "timer6";
|
|
|
|
|
ti,timer-dsp;
|
|
|
|
|
ti,timer-pwm;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
timer7: timer@48824000 {
|
|
|
|
|
compatible = "ti,omap5430-timer";
|
|
|
|
|
reg = <0x48824000 0x80>;
|
|
|
|
|
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "timer7";
|
|
|
|
|
ti,timer-dsp;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
timer8: timer@48826000 {
|
|
|
|
|
compatible = "ti,omap5430-timer";
|
|
|
|
|
reg = <0x48826000 0x80>;
|
|
|
|
|
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "timer8";
|
|
|
|
|
ti,timer-dsp;
|
|
|
|
|
ti,timer-pwm;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
timer9: timer@4803e000 {
|
|
|
|
|
compatible = "ti,omap5430-timer";
|
|
|
|
|
reg = <0x4803e000 0x80>;
|
|
|
|
|
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "timer9";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
timer10: timer@48086000 {
|
|
|
|
|
compatible = "ti,omap5430-timer";
|
|
|
|
|
reg = <0x48086000 0x80>;
|
|
|
|
|
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "timer10";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
timer11: timer@48088000 {
|
|
|
|
|
compatible = "ti,omap5430-timer";
|
|
|
|
|
reg = <0x48088000 0x80>;
|
|
|
|
|
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "timer11";
|
|
|
|
|
ti,timer-pwm;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
timer13: timer@48828000 {
|
|
|
|
|
compatible = "ti,omap5430-timer";
|
|
|
|
|
reg = <0x48828000 0x80>;
|
|
|
|
|
ti,hwmods = "timer13";
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
timer14: timer@4882a000 {
|
|
|
|
|
compatible = "ti,omap5430-timer";
|
|
|
|
|
reg = <0x4882a000 0x80>;
|
|
|
|
|
ti,hwmods = "timer14";
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
timer15: timer@4882c000 {
|
|
|
|
|
compatible = "ti,omap5430-timer";
|
|
|
|
|
reg = <0x4882c000 0x80>;
|
|
|
|
|
ti,hwmods = "timer15";
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
timer16: timer@4882e000 {
|
|
|
|
|
compatible = "ti,omap5430-timer";
|
|
|
|
|
reg = <0x4882e000 0x80>;
|
|
|
|
|
ti,hwmods = "timer16";
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
wdt2: wdt@4ae14000 {
|
|
|
|
|
compatible = "ti,omap4-wdt";
|
|
|
|
|
reg = <0x4ae14000 0x80>;
|
|
|
|
|
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "wd_timer2";
|
|
|
|
|
};
|
|
|
|
|
|
2014-01-14 08:26:46 +08:00
|
|
|
hwspinlock: spinlock@4a0f6000 {
|
|
|
|
|
compatible = "ti,omap4-hwspinlock";
|
|
|
|
|
reg = <0x4a0f6000 0x1000>;
|
|
|
|
|
ti,hwmods = "spinlock";
|
|
|
|
|
#hwlock-cells = <1>;
|
|
|
|
|
};
|
|
|
|
|
|
2013-12-17 18:02:21 +08:00
|
|
|
dmm@4e000000 {
|
|
|
|
|
compatible = "ti,omap5-dmm";
|
|
|
|
|
reg = <0x4e000000 0x800>;
|
|
|
|
|
interrupts = <0 113 0x4>;
|
|
|
|
|
ti,hwmods = "dmm";
|
|
|
|
|
};
|
|
|
|
|
|
2013-08-14 21:38:20 +08:00
|
|
|
i2c1: i2c@48070000 {
|
|
|
|
|
compatible = "ti,omap4-i2c";
|
|
|
|
|
reg = <0x48070000 0x100>;
|
|
|
|
|
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
ti,hwmods = "i2c1";
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
i2c2: i2c@48072000 {
|
|
|
|
|
compatible = "ti,omap4-i2c";
|
|
|
|
|
reg = <0x48072000 0x100>;
|
|
|
|
|
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
ti,hwmods = "i2c2";
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
i2c3: i2c@48060000 {
|
|
|
|
|
compatible = "ti,omap4-i2c";
|
|
|
|
|
reg = <0x48060000 0x100>;
|
|
|
|
|
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
ti,hwmods = "i2c3";
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
i2c4: i2c@4807a000 {
|
|
|
|
|
compatible = "ti,omap4-i2c";
|
|
|
|
|
reg = <0x4807a000 0x100>;
|
|
|
|
|
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
ti,hwmods = "i2c4";
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
i2c5: i2c@4807c000 {
|
|
|
|
|
compatible = "ti,omap4-i2c";
|
|
|
|
|
reg = <0x4807c000 0x100>;
|
|
|
|
|
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
ti,hwmods = "i2c5";
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
mmc1: mmc@4809c000 {
|
|
|
|
|
compatible = "ti,omap4-hsmmc";
|
|
|
|
|
reg = <0x4809c000 0x400>;
|
|
|
|
|
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "mmc1";
|
|
|
|
|
ti,dual-volt;
|
|
|
|
|
ti,needs-special-reset;
|
|
|
|
|
dmas = <&sdma 61>, <&sdma 62>;
|
|
|
|
|
dma-names = "tx", "rx";
|
|
|
|
|
status = "disabled";
|
2014-02-19 22:56:40 +08:00
|
|
|
pbias-supply = <&pbias_mmc_reg>;
|
2013-08-14 21:38:20 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
mmc2: mmc@480b4000 {
|
|
|
|
|
compatible = "ti,omap4-hsmmc";
|
|
|
|
|
reg = <0x480b4000 0x400>;
|
|
|
|
|
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "mmc2";
|
|
|
|
|
ti,needs-special-reset;
|
|
|
|
|
dmas = <&sdma 47>, <&sdma 48>;
|
|
|
|
|
dma-names = "tx", "rx";
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
mmc3: mmc@480ad000 {
|
|
|
|
|
compatible = "ti,omap4-hsmmc";
|
|
|
|
|
reg = <0x480ad000 0x400>;
|
|
|
|
|
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "mmc3";
|
|
|
|
|
ti,needs-special-reset;
|
|
|
|
|
dmas = <&sdma 77>, <&sdma 78>;
|
|
|
|
|
dma-names = "tx", "rx";
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
mmc4: mmc@480d1000 {
|
|
|
|
|
compatible = "ti,omap4-hsmmc";
|
|
|
|
|
reg = <0x480d1000 0x400>;
|
|
|
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "mmc4";
|
|
|
|
|
ti,needs-special-reset;
|
|
|
|
|
dmas = <&sdma 57>, <&sdma 58>;
|
|
|
|
|
dma-names = "tx", "rx";
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
2014-03-03 22:50:23 +08:00
|
|
|
abb_mpu: regulator-abb-mpu {
|
|
|
|
|
compatible = "ti,abb-v3";
|
|
|
|
|
regulator-name = "abb_mpu";
|
|
|
|
|
#address-cells = <0>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
clocks = <&sys_clkin1>;
|
|
|
|
|
ti,settling-time = <50>;
|
|
|
|
|
ti,clock-cycles = <16>;
|
|
|
|
|
|
|
|
|
|
reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
|
|
|
|
|
<0x4ae06014 0x4>, <0x4a003b20 0x8>,
|
|
|
|
|
<0x4ae0c158 0x4>;
|
|
|
|
|
reg-names = "setup-address", "control-address",
|
|
|
|
|
"int-address", "efuse-address",
|
|
|
|
|
"ldo-address";
|
|
|
|
|
ti,tranxdone-status-mask = <0x80>;
|
|
|
|
|
/* LDOVBBMPU_FBB_MUX_CTRL */
|
|
|
|
|
ti,ldovbb-override-mask = <0x400>;
|
|
|
|
|
/* LDOVBBMPU_FBB_VSET_OUT */
|
|
|
|
|
ti,ldovbb-vset-mask = <0x1F>;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* NOTE: only FBB mode used but actual vset will
|
|
|
|
|
* determine final biasing
|
|
|
|
|
*/
|
|
|
|
|
ti,abb_info = <
|
|
|
|
|
/*uV ABB efuse rbb_m fbb_m vset_m*/
|
|
|
|
|
1060000 0 0x0 0 0x02000000 0x01F00000
|
|
|
|
|
1160000 0 0x4 0 0x02000000 0x01F00000
|
|
|
|
|
1210000 0 0x8 0 0x02000000 0x01F00000
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
abb_ivahd: regulator-abb-ivahd {
|
|
|
|
|
compatible = "ti,abb-v3";
|
|
|
|
|
regulator-name = "abb_ivahd";
|
|
|
|
|
#address-cells = <0>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
clocks = <&sys_clkin1>;
|
|
|
|
|
ti,settling-time = <50>;
|
|
|
|
|
ti,clock-cycles = <16>;
|
|
|
|
|
|
|
|
|
|
reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
|
|
|
|
|
<0x4ae06010 0x4>, <0x4a0025cc 0x8>,
|
|
|
|
|
<0x4a002470 0x4>;
|
|
|
|
|
reg-names = "setup-address", "control-address",
|
|
|
|
|
"int-address", "efuse-address",
|
|
|
|
|
"ldo-address";
|
|
|
|
|
ti,tranxdone-status-mask = <0x40000000>;
|
|
|
|
|
/* LDOVBBIVA_FBB_MUX_CTRL */
|
|
|
|
|
ti,ldovbb-override-mask = <0x400>;
|
|
|
|
|
/* LDOVBBIVA_FBB_VSET_OUT */
|
|
|
|
|
ti,ldovbb-vset-mask = <0x1F>;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* NOTE: only FBB mode used but actual vset will
|
|
|
|
|
* determine final biasing
|
|
|
|
|
*/
|
|
|
|
|
ti,abb_info = <
|
|
|
|
|
/*uV ABB efuse rbb_m fbb_m vset_m*/
|
|
|
|
|
1055000 0 0x0 0 0x02000000 0x01F00000
|
|
|
|
|
1150000 0 0x4 0 0x02000000 0x01F00000
|
|
|
|
|
1250000 0 0x8 0 0x02000000 0x01F00000
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
abb_dspeve: regulator-abb-dspeve {
|
|
|
|
|
compatible = "ti,abb-v3";
|
|
|
|
|
regulator-name = "abb_dspeve";
|
|
|
|
|
#address-cells = <0>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
clocks = <&sys_clkin1>;
|
|
|
|
|
ti,settling-time = <50>;
|
|
|
|
|
ti,clock-cycles = <16>;
|
|
|
|
|
|
|
|
|
|
reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
|
|
|
|
|
<0x4ae06010 0x4>, <0x4a0025e0 0x8>,
|
|
|
|
|
<0x4a00246c 0x4>;
|
|
|
|
|
reg-names = "setup-address", "control-address",
|
|
|
|
|
"int-address", "efuse-address",
|
|
|
|
|
"ldo-address";
|
|
|
|
|
ti,tranxdone-status-mask = <0x20000000>;
|
|
|
|
|
/* LDOVBBDSPEVE_FBB_MUX_CTRL */
|
|
|
|
|
ti,ldovbb-override-mask = <0x400>;
|
|
|
|
|
/* LDOVBBDSPEVE_FBB_VSET_OUT */
|
|
|
|
|
ti,ldovbb-vset-mask = <0x1F>;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* NOTE: only FBB mode used but actual vset will
|
|
|
|
|
* determine final biasing
|
|
|
|
|
*/
|
|
|
|
|
ti,abb_info = <
|
|
|
|
|
/*uV ABB efuse rbb_m fbb_m vset_m*/
|
|
|
|
|
1055000 0 0x0 0 0x02000000 0x01F00000
|
|
|
|
|
1150000 0 0x4 0 0x02000000 0x01F00000
|
|
|
|
|
1250000 0 0x8 0 0x02000000 0x01F00000
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
abb_gpu: regulator-abb-gpu {
|
|
|
|
|
compatible = "ti,abb-v3";
|
|
|
|
|
regulator-name = "abb_gpu";
|
|
|
|
|
#address-cells = <0>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
clocks = <&sys_clkin1>;
|
|
|
|
|
ti,settling-time = <50>;
|
|
|
|
|
ti,clock-cycles = <16>;
|
|
|
|
|
|
|
|
|
|
reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
|
|
|
|
|
<0x4ae06010 0x4>, <0x4a003b08 0x8>,
|
|
|
|
|
<0x4ae0c154 0x4>;
|
|
|
|
|
reg-names = "setup-address", "control-address",
|
|
|
|
|
"int-address", "efuse-address",
|
|
|
|
|
"ldo-address";
|
|
|
|
|
ti,tranxdone-status-mask = <0x10000000>;
|
|
|
|
|
/* LDOVBBGPU_FBB_MUX_CTRL */
|
|
|
|
|
ti,ldovbb-override-mask = <0x400>;
|
|
|
|
|
/* LDOVBBGPU_FBB_VSET_OUT */
|
|
|
|
|
ti,ldovbb-vset-mask = <0x1F>;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* NOTE: only FBB mode used but actual vset will
|
|
|
|
|
* determine final biasing
|
|
|
|
|
*/
|
|
|
|
|
ti,abb_info = <
|
|
|
|
|
/*uV ABB efuse rbb_m fbb_m vset_m*/
|
|
|
|
|
1090000 0 0x0 0 0x02000000 0x01F00000
|
|
|
|
|
1210000 0 0x4 0 0x02000000 0x01F00000
|
|
|
|
|
1280000 0 0x8 0 0x02000000 0x01F00000
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
2013-08-14 21:38:20 +08:00
|
|
|
mcspi1: spi@48098000 {
|
|
|
|
|
compatible = "ti,omap4-mcspi";
|
|
|
|
|
reg = <0x48098000 0x200>;
|
|
|
|
|
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
ti,hwmods = "mcspi1";
|
|
|
|
|
ti,spi-num-cs = <4>;
|
|
|
|
|
dmas = <&sdma 35>,
|
|
|
|
|
<&sdma 36>,
|
|
|
|
|
<&sdma 37>,
|
|
|
|
|
<&sdma 38>,
|
|
|
|
|
<&sdma 39>,
|
|
|
|
|
<&sdma 40>,
|
|
|
|
|
<&sdma 41>,
|
|
|
|
|
<&sdma 42>;
|
|
|
|
|
dma-names = "tx0", "rx0", "tx1", "rx1",
|
|
|
|
|
"tx2", "rx2", "tx3", "rx3";
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
mcspi2: spi@4809a000 {
|
|
|
|
|
compatible = "ti,omap4-mcspi";
|
|
|
|
|
reg = <0x4809a000 0x200>;
|
|
|
|
|
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
ti,hwmods = "mcspi2";
|
|
|
|
|
ti,spi-num-cs = <2>;
|
|
|
|
|
dmas = <&sdma 43>,
|
|
|
|
|
<&sdma 44>,
|
|
|
|
|
<&sdma 45>,
|
|
|
|
|
<&sdma 46>;
|
|
|
|
|
dma-names = "tx0", "rx0", "tx1", "rx1";
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
mcspi3: spi@480b8000 {
|
|
|
|
|
compatible = "ti,omap4-mcspi";
|
|
|
|
|
reg = <0x480b8000 0x200>;
|
|
|
|
|
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
ti,hwmods = "mcspi3";
|
|
|
|
|
ti,spi-num-cs = <2>;
|
|
|
|
|
dmas = <&sdma 15>, <&sdma 16>;
|
|
|
|
|
dma-names = "tx0", "rx0";
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
mcspi4: spi@480ba000 {
|
|
|
|
|
compatible = "ti,omap4-mcspi";
|
|
|
|
|
reg = <0x480ba000 0x200>;
|
|
|
|
|
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
ti,hwmods = "mcspi4";
|
|
|
|
|
ti,spi-num-cs = <1>;
|
|
|
|
|
dmas = <&sdma 70>, <&sdma 71>;
|
|
|
|
|
dma-names = "tx0", "rx0";
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
2014-05-06 19:07:24 +08:00
|
|
|
|
|
|
|
|
qspi: qspi@4b300000 {
|
|
|
|
|
compatible = "ti,dra7xxx-qspi";
|
|
|
|
|
reg = <0x4b300000 0x100>;
|
|
|
|
|
reg-names = "qspi_base";
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
ti,hwmods = "qspi";
|
|
|
|
|
clocks = <&qspi_gfclk_div>;
|
|
|
|
|
clock-names = "fck";
|
|
|
|
|
num-cs = <4>;
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
2014-05-07 19:58:58 +08:00
|
|
|
|
|
|
|
|
omap_control_sata: control-phy@4a002374 {
|
|
|
|
|
compatible = "ti,control-phy-pipe3";
|
|
|
|
|
reg = <0x4a002374 0x4>;
|
|
|
|
|
reg-names = "power";
|
|
|
|
|
clocks = <&sys_clkin1>;
|
|
|
|
|
clock-names = "sysclk";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* OCP2SCP3 */
|
|
|
|
|
ocp2scp@4a090000 {
|
|
|
|
|
compatible = "ti,omap-ocp2scp";
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
ranges;
|
|
|
|
|
reg = <0x4a090000 0x20>;
|
|
|
|
|
ti,hwmods = "ocp2scp3";
|
|
|
|
|
sata_phy: phy@4A096000 {
|
|
|
|
|
compatible = "ti,phy-pipe3-sata";
|
|
|
|
|
reg = <0x4A096000 0x80>, /* phy_rx */
|
|
|
|
|
<0x4A096400 0x64>, /* phy_tx */
|
|
|
|
|
<0x4A096800 0x40>; /* pll_ctrl */
|
|
|
|
|
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
|
|
|
|
|
ctrl-module = <&omap_control_sata>;
|
|
|
|
|
clocks = <&sys_clkin1>;
|
|
|
|
|
clock-names = "sysclk";
|
|
|
|
|
#phy-cells = <0>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
sata: sata@4a141100 {
|
|
|
|
|
compatible = "snps,dwc-ahci";
|
|
|
|
|
reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
|
|
|
|
|
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
phys = <&sata_phy>;
|
|
|
|
|
phy-names = "sata-phy";
|
|
|
|
|
clocks = <&sata_ref_clk>;
|
|
|
|
|
ti,hwmods = "sata";
|
|
|
|
|
};
|
2014-05-05 17:54:45 +08:00
|
|
|
|
|
|
|
|
omap_control_usb2phy1: control-phy@4a002300 {
|
|
|
|
|
compatible = "ti,control-phy-usb2";
|
|
|
|
|
reg = <0x4a002300 0x4>;
|
|
|
|
|
reg-names = "power";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
omap_control_usb3phy1: control-phy@4a002370 {
|
|
|
|
|
compatible = "ti,control-phy-pipe3";
|
|
|
|
|
reg = <0x4a002370 0x4>;
|
|
|
|
|
reg-names = "power";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
omap_control_usb2phy2: control-phy@0x4a002e74 {
|
|
|
|
|
compatible = "ti,control-phy-usb2-dra7";
|
|
|
|
|
reg = <0x4a002e74 0x4>;
|
|
|
|
|
reg-names = "power";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* OCP2SCP1 */
|
|
|
|
|
ocp2scp@4a080000 {
|
|
|
|
|
compatible = "ti,omap-ocp2scp";
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
ranges;
|
|
|
|
|
reg = <0x4a080000 0x20>;
|
|
|
|
|
ti,hwmods = "ocp2scp1";
|
|
|
|
|
|
|
|
|
|
usb2_phy1: phy@4a084000 {
|
|
|
|
|
compatible = "ti,omap-usb2";
|
|
|
|
|
reg = <0x4a084000 0x400>;
|
|
|
|
|
ctrl-module = <&omap_control_usb2phy1>;
|
|
|
|
|
clocks = <&usb_phy1_always_on_clk32k>,
|
|
|
|
|
<&usb_otg_ss1_refclk960m>;
|
|
|
|
|
clock-names = "wkupclk",
|
|
|
|
|
"refclk";
|
|
|
|
|
#phy-cells = <0>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
usb2_phy2: phy@4a085000 {
|
|
|
|
|
compatible = "ti,omap-usb2";
|
|
|
|
|
reg = <0x4a085000 0x400>;
|
|
|
|
|
ctrl-module = <&omap_control_usb2phy2>;
|
|
|
|
|
clocks = <&usb_phy2_always_on_clk32k>,
|
|
|
|
|
<&usb_otg_ss2_refclk960m>;
|
|
|
|
|
clock-names = "wkupclk",
|
|
|
|
|
"refclk";
|
|
|
|
|
#phy-cells = <0>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
usb3_phy1: phy@4a084400 {
|
|
|
|
|
compatible = "ti,omap-usb3";
|
|
|
|
|
reg = <0x4a084400 0x80>,
|
|
|
|
|
<0x4a084800 0x64>,
|
|
|
|
|
<0x4a084c00 0x40>;
|
|
|
|
|
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
|
|
|
|
|
ctrl-module = <&omap_control_usb3phy1>;
|
|
|
|
|
clocks = <&usb_phy3_always_on_clk32k>,
|
|
|
|
|
<&sys_clkin1>,
|
|
|
|
|
<&usb_otg_ss1_refclk960m>;
|
|
|
|
|
clock-names = "wkupclk",
|
|
|
|
|
"sysclk",
|
|
|
|
|
"refclk";
|
|
|
|
|
#phy-cells = <0>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
omap_dwc3_1@48880000 {
|
|
|
|
|
compatible = "ti,dwc3";
|
|
|
|
|
ti,hwmods = "usb_otg_ss1";
|
|
|
|
|
reg = <0x48880000 0x10000>;
|
|
|
|
|
interrupts = <0 77 4>;
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
utmi-mode = <2>;
|
|
|
|
|
ranges;
|
|
|
|
|
usb1: usb@48890000 {
|
|
|
|
|
compatible = "snps,dwc3";
|
|
|
|
|
reg = <0x48890000 0x17000>;
|
|
|
|
|
interrupts = <0 76 4>;
|
|
|
|
|
phys = <&usb2_phy1>, <&usb3_phy1>;
|
|
|
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
|
|
|
tx-fifo-resize;
|
|
|
|
|
maximum-speed = "super-speed";
|
|
|
|
|
dr_mode = "otg";
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
omap_dwc3_2@488c0000 {
|
|
|
|
|
compatible = "ti,dwc3";
|
|
|
|
|
ti,hwmods = "usb_otg_ss2";
|
|
|
|
|
reg = <0x488c0000 0x10000>;
|
|
|
|
|
interrupts = <0 92 4>;
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
utmi-mode = <2>;
|
|
|
|
|
ranges;
|
|
|
|
|
usb2: usb@488d0000 {
|
|
|
|
|
compatible = "snps,dwc3";
|
|
|
|
|
reg = <0x488d0000 0x17000>;
|
|
|
|
|
interrupts = <0 78 4>;
|
|
|
|
|
phys = <&usb2_phy2>;
|
|
|
|
|
phy-names = "usb2-phy";
|
|
|
|
|
tx-fifo-resize;
|
|
|
|
|
maximum-speed = "high-speed";
|
|
|
|
|
dr_mode = "otg";
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
|
|
|
|
|
omap_dwc3_3@48900000 {
|
|
|
|
|
compatible = "ti,dwc3";
|
|
|
|
|
ti,hwmods = "usb_otg_ss3";
|
|
|
|
|
reg = <0x48900000 0x10000>;
|
|
|
|
|
/* interrupts = <0 TBD 4>; */
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
utmi-mode = <2>;
|
|
|
|
|
ranges;
|
|
|
|
|
status = "disabled";
|
|
|
|
|
usb3: usb@48910000 {
|
|
|
|
|
compatible = "snps,dwc3";
|
|
|
|
|
reg = <0x48910000 0x17000>;
|
|
|
|
|
/* interrupts = <0 93 4>; */
|
|
|
|
|
tx-fifo-resize;
|
|
|
|
|
maximum-speed = "high-speed";
|
|
|
|
|
dr_mode = "otg";
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
omap_dwc3_4@48940000 {
|
|
|
|
|
compatible = "ti,dwc3";
|
|
|
|
|
ti,hwmods = "usb_otg_ss4";
|
|
|
|
|
reg = <0x48940000 0x10000>;
|
|
|
|
|
/* interrupts = <0 TBD 4>; */
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
utmi-mode = <2>;
|
|
|
|
|
ranges;
|
|
|
|
|
status = "disabled";
|
|
|
|
|
usb4: usb@48950000 {
|
|
|
|
|
compatible = "snps,dwc3";
|
|
|
|
|
reg = <0x48950000 0x17000>;
|
|
|
|
|
/* interrupts = <0 TBD 4>; */
|
|
|
|
|
tx-fifo-resize;
|
|
|
|
|
maximum-speed = "high-speed";
|
|
|
|
|
dr_mode = "otg";
|
|
|
|
|
};
|
|
|
|
|
};
|
2014-05-19 17:15:47 +08:00
|
|
|
|
|
|
|
|
elm: elm@48078000 {
|
|
|
|
|
compatible = "ti,am3352-elm";
|
|
|
|
|
reg = <0x48078000 0xfc0>; /* device IO registers */
|
|
|
|
|
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
ti,hwmods = "elm";
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
gpmc: gpmc@50000000 {
|
|
|
|
|
compatible = "ti,am3352-gpmc";
|
|
|
|
|
ti,hwmods = "gpmc";
|
|
|
|
|
reg = <0x50000000 0x37c>; /* device IO registers */
|
|
|
|
|
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
gpmc,num-cs = <8>;
|
|
|
|
|
gpmc,num-waitpins = <2>;
|
|
|
|
|
#address-cells = <2>;
|
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
2014-05-07 18:20:48 +08:00
|
|
|
|
|
|
|
|
atl: atl@4843c000 {
|
|
|
|
|
compatible = "ti,dra7-atl";
|
|
|
|
|
reg = <0x4843c000 0x3ff>;
|
|
|
|
|
ti,hwmods = "atl";
|
|
|
|
|
ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
|
|
|
|
|
<&atl_clkin2_ck>, <&atl_clkin3_ck>;
|
|
|
|
|
clocks = <&atl_gfclk_mux>;
|
|
|
|
|
clock-names = "fck";
|
|
|
|
|
status = "disabled";
|
|
|
|
|
};
|
2013-08-14 21:38:20 +08:00
|
|
|
};
|
|
|
|
|
};
|
2013-07-18 22:18:33 +08:00
|
|
|
|
|
|
|
|
/include/ "dra7xx-clocks.dtsi"
|
