OpenCloudOS-Kernel/drivers/bluetooth/btbcm.c

724 lines
17 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
*
* Bluetooth support for Broadcom devices
*
* Copyright (C) 2015 Intel Corporation
*/
#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/dmi.h>
#include <linux/of.h>
#include <asm/unaligned.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include "btbcm.h"
#define VERSION "0.1"
#define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}})
#define BDADDR_BCM20702A1 (&(bdaddr_t) {{0x00, 0x00, 0xa0, 0x02, 0x70, 0x20}})
#define BDADDR_BCM2076B1 (&(bdaddr_t) {{0x79, 0x56, 0x00, 0xa0, 0x76, 0x20}})
#define BDADDR_BCM43430A0 (&(bdaddr_t) {{0xac, 0x1f, 0x12, 0xa0, 0x43, 0x43}})
#define BDADDR_BCM4324B3 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb3, 0x24, 0x43}})
#define BDADDR_BCM4330B1 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb1, 0x30, 0x43}})
#define BDADDR_BCM4334B0 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb0, 0x34, 0x43}})
#define BDADDR_BCM4345C5 (&(bdaddr_t) {{0xac, 0x1f, 0x00, 0xc5, 0x45, 0x43}})
#define BDADDR_BCM43341B (&(bdaddr_t) {{0xac, 0x1f, 0x00, 0x1b, 0x34, 0x43}})
#define BCM_FW_NAME_LEN 64
#define BCM_FW_NAME_COUNT_MAX 4
Bluetooth: btbcm: Try multiple Patch filenames when loading the Patch firmware Currently the bcm_uart_subver_ and bcm_usb_subver_table-s lack entries for various newer chipsets. This makes the code use just "BCM" as prefix for the filename to pass to request-firmware, making it harder for users to figure out which firmware they need. This especially a problem with UART attached devices where this leads to the filename being "BCM.hcd". If we add new entries to the subver-tables now, then this will change what firmware file the kernel looks for, e.g. currently linux-firmware contains a brcm/BCM-0bb4-0306.hcd file. If we add the info for the BCM20703A1 to the subver table, then this will change to brcm/BCM20703A1-0bb4-0306.hcd. This will cause the file to no longer get loaded breaking Bluetooth for existing users, going against the no regressions policy. To avoid this regression make the btbcm code try multiple filenames, first try the fullname, e.g. BCM20703A1-0bb4-0306.hcd and if that is not found, then fallback to the name with just BCM as prefix. This commit also adds an info message which filename was used, this makes the output look like this for example: [ 57.387867] Bluetooth: hci0: BCM20703A1 [ 57.387870] Bluetooth: hci0: BCM20703A1 (001.001.005) build 0000 [ 57.389438] Bluetooth: hci0: BCM20703A1 'brcm/BCM20703A1-0a5c-6410.hcd' Patch [ 58.681769] Bluetooth: hci0: BCM20703A1 Generic USB 20Mhz fcbga_BU [ 58.681772] Bluetooth: hci0: BCM20703A1 (001.001.005) build 0481 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-18 01:15:31 +08:00
/* For kmalloc-ing the fw-name array instead of putting it on the stack */
typedef char bcm_fw_name[BCM_FW_NAME_LEN];
int btbcm_check_bdaddr(struct hci_dev *hdev)
{
struct hci_rp_read_bd_addr *bda;
struct sk_buff *skb;
skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
int err = PTR_ERR(skb);
bt_dev_err(hdev, "BCM: Reading device address failed (%d)", err);
return err;
}
if (skb->len != sizeof(*bda)) {
bt_dev_err(hdev, "BCM: Device address length mismatch");
kfree_skb(skb);
return -EIO;
}
bda = (struct hci_rp_read_bd_addr *)skb->data;
/* Check if the address indicates a controller with either an
* invalid or default address. In both cases the device needs
* to be marked as not having a valid address.
*
* The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller
* with no configured address.
*
* The address 20:70:02:A0:00:00 indicates a BCM20702A1 controller
* with no configured address.
*
* The address 20:76:A0:00:56:79 indicates a BCM2076B1 controller
* with no configured address.
*
* The address 43:24:B3:00:00:00 indicates a BCM4324B3 controller
* with waiting for configuration state.
*
* The address 43:30:B1:00:00:00 indicates a BCM4330B1 controller
* with waiting for configuration state.
*
* The address 43:43:A0:12:1F:AC indicates a BCM43430A0 controller
* with no configured address.
*/
if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0) ||
!bacmp(&bda->bdaddr, BDADDR_BCM20702A1) ||
!bacmp(&bda->bdaddr, BDADDR_BCM2076B1) ||
!bacmp(&bda->bdaddr, BDADDR_BCM4324B3) ||
!bacmp(&bda->bdaddr, BDADDR_BCM4330B1) ||
!bacmp(&bda->bdaddr, BDADDR_BCM4334B0) ||
!bacmp(&bda->bdaddr, BDADDR_BCM4345C5) ||
!bacmp(&bda->bdaddr, BDADDR_BCM43430A0) ||
!bacmp(&bda->bdaddr, BDADDR_BCM43341B)) {
bt_dev_info(hdev, "BCM: Using default device address (%pMR)",
&bda->bdaddr);
set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
}
kfree_skb(skb);
return 0;
}
EXPORT_SYMBOL_GPL(btbcm_check_bdaddr);
int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
{
struct sk_buff *skb;
int err;
skb = __hci_cmd_sync(hdev, 0xfc01, 6, bdaddr, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
err = PTR_ERR(skb);
bt_dev_err(hdev, "BCM: Change address command failed (%d)", err);
return err;
}
kfree_skb(skb);
return 0;
}
EXPORT_SYMBOL_GPL(btbcm_set_bdaddr);
int btbcm_read_pcm_int_params(struct hci_dev *hdev,
struct bcm_set_pcm_int_params *params)
{
struct sk_buff *skb;
int err = 0;
skb = __hci_cmd_sync(hdev, 0xfc1d, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
err = PTR_ERR(skb);
bt_dev_err(hdev, "BCM: Read PCM int params failed (%d)", err);
return err;
}
if (skb->len != 6 || skb->data[0]) {
bt_dev_err(hdev, "BCM: Read PCM int params length mismatch");
kfree_skb(skb);
return -EIO;
}
if (params)
memcpy(params, skb->data + 1, 5);
kfree_skb(skb);
return 0;
}
EXPORT_SYMBOL_GPL(btbcm_read_pcm_int_params);
int btbcm_write_pcm_int_params(struct hci_dev *hdev,
const struct bcm_set_pcm_int_params *params)
{
struct sk_buff *skb;
int err;
skb = __hci_cmd_sync(hdev, 0xfc1c, 5, params, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
err = PTR_ERR(skb);
bt_dev_err(hdev, "BCM: Write PCM int params failed (%d)", err);
return err;
}
kfree_skb(skb);
return 0;
}
EXPORT_SYMBOL_GPL(btbcm_write_pcm_int_params);
int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw)
{
const struct hci_command_hdr *cmd;
const u8 *fw_ptr;
size_t fw_size;
struct sk_buff *skb;
u16 opcode;
int err = 0;
/* Start Download */
skb = __hci_cmd_sync(hdev, 0xfc2e, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
err = PTR_ERR(skb);
bt_dev_err(hdev, "BCM: Download Minidrv command failed (%d)",
err);
goto done;
}
kfree_skb(skb);
/* 50 msec delay after Download Minidrv completes */
msleep(50);
fw_ptr = fw->data;
fw_size = fw->size;
while (fw_size >= sizeof(*cmd)) {
const u8 *cmd_param;
cmd = (struct hci_command_hdr *)fw_ptr;
fw_ptr += sizeof(*cmd);
fw_size -= sizeof(*cmd);
if (fw_size < cmd->plen) {
bt_dev_err(hdev, "BCM: Patch is corrupted");
err = -EINVAL;
goto done;
}
cmd_param = fw_ptr;
fw_ptr += cmd->plen;
fw_size -= cmd->plen;
opcode = le16_to_cpu(cmd->opcode);
skb = __hci_cmd_sync(hdev, opcode, cmd->plen, cmd_param,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
err = PTR_ERR(skb);
bt_dev_err(hdev, "BCM: Patch command %04x failed (%d)",
opcode, err);
goto done;
}
kfree_skb(skb);
}
/* 250 msec delay after Launch Ram completes */
msleep(250);
done:
return err;
}
EXPORT_SYMBOL(btbcm_patchram);
static int btbcm_reset(struct hci_dev *hdev)
{
struct sk_buff *skb;
skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
int err = PTR_ERR(skb);
bt_dev_err(hdev, "BCM: Reset failed (%d)", err);
return err;
}
kfree_skb(skb);
/* 100 msec delay for module to complete reset process */
msleep(100);
return 0;
}
static struct sk_buff *btbcm_read_local_name(struct hci_dev *hdev)
{
struct sk_buff *skb;
skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_NAME, 0, NULL,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
bt_dev_err(hdev, "BCM: Reading local name failed (%ld)",
PTR_ERR(skb));
return skb;
}
if (skb->len != sizeof(struct hci_rp_read_local_name)) {
bt_dev_err(hdev, "BCM: Local name length mismatch");
kfree_skb(skb);
return ERR_PTR(-EIO);
}
return skb;
}
static struct sk_buff *btbcm_read_local_version(struct hci_dev *hdev)
{
struct sk_buff *skb;
skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
bt_dev_err(hdev, "BCM: Reading local version info failed (%ld)",
PTR_ERR(skb));
return skb;
}
if (skb->len != sizeof(struct hci_rp_read_local_version)) {
bt_dev_err(hdev, "BCM: Local version length mismatch");
kfree_skb(skb);
return ERR_PTR(-EIO);
}
return skb;
}
static struct sk_buff *btbcm_read_verbose_config(struct hci_dev *hdev)
{
struct sk_buff *skb;
skb = __hci_cmd_sync(hdev, 0xfc79, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
bt_dev_err(hdev, "BCM: Read verbose config info failed (%ld)",
PTR_ERR(skb));
return skb;
}
if (skb->len != 7) {
bt_dev_err(hdev, "BCM: Verbose config length mismatch");
kfree_skb(skb);
return ERR_PTR(-EIO);
}
return skb;
}
static struct sk_buff *btbcm_read_controller_features(struct hci_dev *hdev)
{
struct sk_buff *skb;
skb = __hci_cmd_sync(hdev, 0xfc6e, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
bt_dev_err(hdev, "BCM: Read controller features failed (%ld)",
PTR_ERR(skb));
return skb;
}
if (skb->len != 9) {
bt_dev_err(hdev, "BCM: Controller features length mismatch");
kfree_skb(skb);
return ERR_PTR(-EIO);
}
return skb;
}
static struct sk_buff *btbcm_read_usb_product(struct hci_dev *hdev)
{
struct sk_buff *skb;
skb = __hci_cmd_sync(hdev, 0xfc5a, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
bt_dev_err(hdev, "BCM: Read USB product info failed (%ld)",
PTR_ERR(skb));
return skb;
}
if (skb->len != 5) {
bt_dev_err(hdev, "BCM: USB product length mismatch");
kfree_skb(skb);
return ERR_PTR(-EIO);
}
return skb;
}
static const struct dmi_system_id disable_broken_read_transmit_power[] = {
{
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro16,1"),
},
},
{
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro16,2"),
},
},
{
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro16,4"),
},
},
{
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir8,1"),
},
},
{
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir8,2"),
},
},
{
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "iMac20,1"),
},
},
{
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "iMac20,2"),
},
},
{ }
};
static int btbcm_read_info(struct hci_dev *hdev)
{
struct sk_buff *skb;
/* Read Verbose Config Version Info */
skb = btbcm_read_verbose_config(hdev);
if (IS_ERR(skb))
return PTR_ERR(skb);
bt_dev_info(hdev, "BCM: chip id %u", skb->data[1]);
kfree_skb(skb);
/* Read Controller Features */
skb = btbcm_read_controller_features(hdev);
if (IS_ERR(skb))
return PTR_ERR(skb);
bt_dev_info(hdev, "BCM: features 0x%2.2x", skb->data[1]);
kfree_skb(skb);
/* Read DMI and disable broken Read LE Min/Max Tx Power */
if (dmi_first_match(disable_broken_read_transmit_power))
set_bit(HCI_QUIRK_BROKEN_READ_TRANSMIT_POWER, &hdev->quirks);
return 0;
}
static int btbcm_print_local_name(struct hci_dev *hdev)
{
struct sk_buff *skb;
/* Read Local Name */
skb = btbcm_read_local_name(hdev);
if (IS_ERR(skb))
return PTR_ERR(skb);
bt_dev_info(hdev, "%s", (char *)(skb->data + 1));
kfree_skb(skb);
return 0;
}
struct bcm_subver_table {
u16 subver;
const char *name;
};
static const struct bcm_subver_table bcm_uart_subver_table[] = {
{ 0x1111, "BCM4362A2" }, /* 000.017.017 */
{ 0x4103, "BCM4330B1" }, /* 002.001.003 */
{ 0x410d, "BCM4334B0" }, /* 002.001.013 */
{ 0x410e, "BCM43341B0" }, /* 002.001.014 */
{ 0x4204, "BCM2076B1" }, /* 002.002.004 */
{ 0x4406, "BCM4324B3" }, /* 002.004.006 */
{ 0x4606, "BCM4324B5" }, /* 002.006.006 */
{ 0x6109, "BCM4335C0" }, /* 003.001.009 */
{ 0x610c, "BCM4354" }, /* 003.001.012 */
{ 0x2122, "BCM4343A0" }, /* 001.001.034 */
{ 0x2209, "BCM43430A1" }, /* 001.002.009 */
{ 0x6119, "BCM4345C0" }, /* 003.001.025 */
{ 0x6606, "BCM4345C5" }, /* 003.006.006 */
{ 0x230f, "BCM4356A2" }, /* 001.003.015 */
{ 0x220e, "BCM20702A1" }, /* 001.002.014 */
{ 0x4217, "BCM4329B1" }, /* 002.002.023 */
{ 0x6106, "BCM4359C0" }, /* 003.001.006 */
{ 0x4106, "BCM4335A0" }, /* 002.001.006 */
{ 0x410c, "BCM43430B0" }, /* 002.001.012 */
{ 0x2119, "BCM4373A0" }, /* 001.001.025 */
{ }
};
static const struct bcm_subver_table bcm_usb_subver_table[] = {
{ 0x2105, "BCM20703A1" }, /* 001.001.005 */
{ 0x210b, "BCM43142A0" }, /* 001.001.011 */
{ 0x2112, "BCM4314A0" }, /* 001.001.018 */
{ 0x2118, "BCM20702A0" }, /* 001.001.024 */
{ 0x2126, "BCM4335A0" }, /* 001.001.038 */
{ 0x220e, "BCM20702A1" }, /* 001.002.014 */
{ 0x230f, "BCM4356A2" }, /* 001.003.015 */
{ 0x4106, "BCM4335B0" }, /* 002.001.006 */
{ 0x410e, "BCM20702B0" }, /* 002.001.014 */
{ 0x6109, "BCM4335C0" }, /* 003.001.009 */
{ 0x610c, "BCM4354" }, /* 003.001.012 */
{ 0x6607, "BCM4350C5" }, /* 003.006.007 */
{ }
};
/*
* This currently only looks up the device tree board appendix,
* but can be expanded to other mechanisms.
*/
static const char *btbcm_get_board_name(struct device *dev)
{
#ifdef CONFIG_OF
struct device_node *root;
char *board_type;
const char *tmp;
int len;
int i;
root = of_find_node_by_path("/");
if (!root)
return NULL;
if (of_property_read_string_index(root, "compatible", 0, &tmp))
return NULL;
/* get rid of any '/' in the compatible string */
len = strlen(tmp) + 1;
board_type = devm_kzalloc(dev, len, GFP_KERNEL);
strscpy(board_type, tmp, len);
for (i = 0; i < board_type[i]; i++) {
if (board_type[i] == '/')
board_type[i] = '-';
}
of_node_put(root);
return board_type;
#else
return NULL;
#endif
}
int btbcm_initialize(struct hci_dev *hdev, bool *fw_load_done)
{
u16 subver, rev, pid, vid;
struct sk_buff *skb;
struct hci_rp_read_local_version *ver;
const struct bcm_subver_table *bcm_subver_table;
Bluetooth: btbcm: Try multiple Patch filenames when loading the Patch firmware Currently the bcm_uart_subver_ and bcm_usb_subver_table-s lack entries for various newer chipsets. This makes the code use just "BCM" as prefix for the filename to pass to request-firmware, making it harder for users to figure out which firmware they need. This especially a problem with UART attached devices where this leads to the filename being "BCM.hcd". If we add new entries to the subver-tables now, then this will change what firmware file the kernel looks for, e.g. currently linux-firmware contains a brcm/BCM-0bb4-0306.hcd file. If we add the info for the BCM20703A1 to the subver table, then this will change to brcm/BCM20703A1-0bb4-0306.hcd. This will cause the file to no longer get loaded breaking Bluetooth for existing users, going against the no regressions policy. To avoid this regression make the btbcm code try multiple filenames, first try the fullname, e.g. BCM20703A1-0bb4-0306.hcd and if that is not found, then fallback to the name with just BCM as prefix. This commit also adds an info message which filename was used, this makes the output look like this for example: [ 57.387867] Bluetooth: hci0: BCM20703A1 [ 57.387870] Bluetooth: hci0: BCM20703A1 (001.001.005) build 0000 [ 57.389438] Bluetooth: hci0: BCM20703A1 'brcm/BCM20703A1-0a5c-6410.hcd' Patch [ 58.681769] Bluetooth: hci0: BCM20703A1 Generic USB 20Mhz fcbga_BU [ 58.681772] Bluetooth: hci0: BCM20703A1 (001.001.005) build 0481 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-18 01:15:31 +08:00
const char *hw_name = NULL;
const char *board_name;
Bluetooth: btbcm: Try multiple Patch filenames when loading the Patch firmware Currently the bcm_uart_subver_ and bcm_usb_subver_table-s lack entries for various newer chipsets. This makes the code use just "BCM" as prefix for the filename to pass to request-firmware, making it harder for users to figure out which firmware they need. This especially a problem with UART attached devices where this leads to the filename being "BCM.hcd". If we add new entries to the subver-tables now, then this will change what firmware file the kernel looks for, e.g. currently linux-firmware contains a brcm/BCM-0bb4-0306.hcd file. If we add the info for the BCM20703A1 to the subver table, then this will change to brcm/BCM20703A1-0bb4-0306.hcd. This will cause the file to no longer get loaded breaking Bluetooth for existing users, going against the no regressions policy. To avoid this regression make the btbcm code try multiple filenames, first try the fullname, e.g. BCM20703A1-0bb4-0306.hcd and if that is not found, then fallback to the name with just BCM as prefix. This commit also adds an info message which filename was used, this makes the output look like this for example: [ 57.387867] Bluetooth: hci0: BCM20703A1 [ 57.387870] Bluetooth: hci0: BCM20703A1 (001.001.005) build 0000 [ 57.389438] Bluetooth: hci0: BCM20703A1 'brcm/BCM20703A1-0a5c-6410.hcd' Patch [ 58.681769] Bluetooth: hci0: BCM20703A1 Generic USB 20Mhz fcbga_BU [ 58.681772] Bluetooth: hci0: BCM20703A1 (001.001.005) build 0481 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-18 01:15:31 +08:00
char postfix[16] = "";
int fw_name_count = 0;
bcm_fw_name *fw_name;
const struct firmware *fw;
int i, err;
board_name = btbcm_get_board_name(&hdev->dev);
/* Reset */
err = btbcm_reset(hdev);
if (err)
return err;
/* Read Local Version Info */
skb = btbcm_read_local_version(hdev);
if (IS_ERR(skb))
return PTR_ERR(skb);
ver = (struct hci_rp_read_local_version *)skb->data;
rev = le16_to_cpu(ver->hci_rev);
subver = le16_to_cpu(ver->lmp_subver);
kfree_skb(skb);
/* Read controller information */
if (!(*fw_load_done)) {
err = btbcm_read_info(hdev);
if (err)
return err;
}
err = btbcm_print_local_name(hdev);
if (err)
return err;
bcm_subver_table = (hdev->bus == HCI_USB) ? bcm_usb_subver_table :
bcm_uart_subver_table;
for (i = 0; bcm_subver_table[i].name; i++) {
if (subver == bcm_subver_table[i].subver) {
hw_name = bcm_subver_table[i].name;
break;
}
}
bt_dev_info(hdev, "%s (%3.3u.%3.3u.%3.3u) build %4.4u",
Bluetooth: btbcm: Try multiple Patch filenames when loading the Patch firmware Currently the bcm_uart_subver_ and bcm_usb_subver_table-s lack entries for various newer chipsets. This makes the code use just "BCM" as prefix for the filename to pass to request-firmware, making it harder for users to figure out which firmware they need. This especially a problem with UART attached devices where this leads to the filename being "BCM.hcd". If we add new entries to the subver-tables now, then this will change what firmware file the kernel looks for, e.g. currently linux-firmware contains a brcm/BCM-0bb4-0306.hcd file. If we add the info for the BCM20703A1 to the subver table, then this will change to brcm/BCM20703A1-0bb4-0306.hcd. This will cause the file to no longer get loaded breaking Bluetooth for existing users, going against the no regressions policy. To avoid this regression make the btbcm code try multiple filenames, first try the fullname, e.g. BCM20703A1-0bb4-0306.hcd and if that is not found, then fallback to the name with just BCM as prefix. This commit also adds an info message which filename was used, this makes the output look like this for example: [ 57.387867] Bluetooth: hci0: BCM20703A1 [ 57.387870] Bluetooth: hci0: BCM20703A1 (001.001.005) build 0000 [ 57.389438] Bluetooth: hci0: BCM20703A1 'brcm/BCM20703A1-0a5c-6410.hcd' Patch [ 58.681769] Bluetooth: hci0: BCM20703A1 Generic USB 20Mhz fcbga_BU [ 58.681772] Bluetooth: hci0: BCM20703A1 (001.001.005) build 0481 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-18 01:15:31 +08:00
hw_name ? hw_name : "BCM", (subver & 0xe000) >> 13,
(subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
if (*fw_load_done)
return 0;
if (hdev->bus == HCI_USB) {
/* Read USB Product Info */
skb = btbcm_read_usb_product(hdev);
if (IS_ERR(skb))
return PTR_ERR(skb);
vid = get_unaligned_le16(skb->data + 1);
pid = get_unaligned_le16(skb->data + 3);
kfree_skb(skb);
Bluetooth: btbcm: Try multiple Patch filenames when loading the Patch firmware Currently the bcm_uart_subver_ and bcm_usb_subver_table-s lack entries for various newer chipsets. This makes the code use just "BCM" as prefix for the filename to pass to request-firmware, making it harder for users to figure out which firmware they need. This especially a problem with UART attached devices where this leads to the filename being "BCM.hcd". If we add new entries to the subver-tables now, then this will change what firmware file the kernel looks for, e.g. currently linux-firmware contains a brcm/BCM-0bb4-0306.hcd file. If we add the info for the BCM20703A1 to the subver table, then this will change to brcm/BCM20703A1-0bb4-0306.hcd. This will cause the file to no longer get loaded breaking Bluetooth for existing users, going against the no regressions policy. To avoid this regression make the btbcm code try multiple filenames, first try the fullname, e.g. BCM20703A1-0bb4-0306.hcd and if that is not found, then fallback to the name with just BCM as prefix. This commit also adds an info message which filename was used, this makes the output look like this for example: [ 57.387867] Bluetooth: hci0: BCM20703A1 [ 57.387870] Bluetooth: hci0: BCM20703A1 (001.001.005) build 0000 [ 57.389438] Bluetooth: hci0: BCM20703A1 'brcm/BCM20703A1-0a5c-6410.hcd' Patch [ 58.681769] Bluetooth: hci0: BCM20703A1 Generic USB 20Mhz fcbga_BU [ 58.681772] Bluetooth: hci0: BCM20703A1 (001.001.005) build 0481 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-18 01:15:31 +08:00
snprintf(postfix, sizeof(postfix), "-%4.4x-%4.4x", vid, pid);
}
Bluetooth: btbcm: Try multiple Patch filenames when loading the Patch firmware Currently the bcm_uart_subver_ and bcm_usb_subver_table-s lack entries for various newer chipsets. This makes the code use just "BCM" as prefix for the filename to pass to request-firmware, making it harder for users to figure out which firmware they need. This especially a problem with UART attached devices where this leads to the filename being "BCM.hcd". If we add new entries to the subver-tables now, then this will change what firmware file the kernel looks for, e.g. currently linux-firmware contains a brcm/BCM-0bb4-0306.hcd file. If we add the info for the BCM20703A1 to the subver table, then this will change to brcm/BCM20703A1-0bb4-0306.hcd. This will cause the file to no longer get loaded breaking Bluetooth for existing users, going against the no regressions policy. To avoid this regression make the btbcm code try multiple filenames, first try the fullname, e.g. BCM20703A1-0bb4-0306.hcd and if that is not found, then fallback to the name with just BCM as prefix. This commit also adds an info message which filename was used, this makes the output look like this for example: [ 57.387867] Bluetooth: hci0: BCM20703A1 [ 57.387870] Bluetooth: hci0: BCM20703A1 (001.001.005) build 0000 [ 57.389438] Bluetooth: hci0: BCM20703A1 'brcm/BCM20703A1-0a5c-6410.hcd' Patch [ 58.681769] Bluetooth: hci0: BCM20703A1 Generic USB 20Mhz fcbga_BU [ 58.681772] Bluetooth: hci0: BCM20703A1 (001.001.005) build 0481 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-18 01:15:31 +08:00
fw_name = kmalloc(BCM_FW_NAME_COUNT_MAX * BCM_FW_NAME_LEN, GFP_KERNEL);
if (!fw_name)
return -ENOMEM;
if (hw_name) {
if (board_name) {
snprintf(fw_name[fw_name_count], BCM_FW_NAME_LEN,
"brcm/%s%s.%s.hcd", hw_name, postfix, board_name);
fw_name_count++;
}
Bluetooth: btbcm: Try multiple Patch filenames when loading the Patch firmware Currently the bcm_uart_subver_ and bcm_usb_subver_table-s lack entries for various newer chipsets. This makes the code use just "BCM" as prefix for the filename to pass to request-firmware, making it harder for users to figure out which firmware they need. This especially a problem with UART attached devices where this leads to the filename being "BCM.hcd". If we add new entries to the subver-tables now, then this will change what firmware file the kernel looks for, e.g. currently linux-firmware contains a brcm/BCM-0bb4-0306.hcd file. If we add the info for the BCM20703A1 to the subver table, then this will change to brcm/BCM20703A1-0bb4-0306.hcd. This will cause the file to no longer get loaded breaking Bluetooth for existing users, going against the no regressions policy. To avoid this regression make the btbcm code try multiple filenames, first try the fullname, e.g. BCM20703A1-0bb4-0306.hcd and if that is not found, then fallback to the name with just BCM as prefix. This commit also adds an info message which filename was used, this makes the output look like this for example: [ 57.387867] Bluetooth: hci0: BCM20703A1 [ 57.387870] Bluetooth: hci0: BCM20703A1 (001.001.005) build 0000 [ 57.389438] Bluetooth: hci0: BCM20703A1 'brcm/BCM20703A1-0a5c-6410.hcd' Patch [ 58.681769] Bluetooth: hci0: BCM20703A1 Generic USB 20Mhz fcbga_BU [ 58.681772] Bluetooth: hci0: BCM20703A1 (001.001.005) build 0481 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-18 01:15:31 +08:00
snprintf(fw_name[fw_name_count], BCM_FW_NAME_LEN,
"brcm/%s%s.hcd", hw_name, postfix);
fw_name_count++;
}
if (board_name) {
snprintf(fw_name[fw_name_count], BCM_FW_NAME_LEN,
"brcm/BCM%s.%s.hcd", postfix, board_name);
fw_name_count++;
}
Bluetooth: btbcm: Try multiple Patch filenames when loading the Patch firmware Currently the bcm_uart_subver_ and bcm_usb_subver_table-s lack entries for various newer chipsets. This makes the code use just "BCM" as prefix for the filename to pass to request-firmware, making it harder for users to figure out which firmware they need. This especially a problem with UART attached devices where this leads to the filename being "BCM.hcd". If we add new entries to the subver-tables now, then this will change what firmware file the kernel looks for, e.g. currently linux-firmware contains a brcm/BCM-0bb4-0306.hcd file. If we add the info for the BCM20703A1 to the subver table, then this will change to brcm/BCM20703A1-0bb4-0306.hcd. This will cause the file to no longer get loaded breaking Bluetooth for existing users, going against the no regressions policy. To avoid this regression make the btbcm code try multiple filenames, first try the fullname, e.g. BCM20703A1-0bb4-0306.hcd and if that is not found, then fallback to the name with just BCM as prefix. This commit also adds an info message which filename was used, this makes the output look like this for example: [ 57.387867] Bluetooth: hci0: BCM20703A1 [ 57.387870] Bluetooth: hci0: BCM20703A1 (001.001.005) build 0000 [ 57.389438] Bluetooth: hci0: BCM20703A1 'brcm/BCM20703A1-0a5c-6410.hcd' Patch [ 58.681769] Bluetooth: hci0: BCM20703A1 Generic USB 20Mhz fcbga_BU [ 58.681772] Bluetooth: hci0: BCM20703A1 (001.001.005) build 0481 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-18 01:15:31 +08:00
snprintf(fw_name[fw_name_count], BCM_FW_NAME_LEN,
"brcm/BCM%s.hcd", postfix);
fw_name_count++;
for (i = 0; i < fw_name_count; i++) {
err = firmware_request_nowarn(&fw, fw_name[i], &hdev->dev);
if (err == 0) {
bt_dev_info(hdev, "%s '%s' Patch",
hw_name ? hw_name : "BCM", fw_name[i]);
*fw_load_done = true;
break;
}
}
if (*fw_load_done) {
err = btbcm_patchram(hdev, fw);
if (err)
bt_dev_info(hdev, "BCM: Patch failed (%d)", err);
release_firmware(fw);
} else {
bt_dev_err(hdev, "BCM: firmware Patch file not found, tried:");
for (i = 0; i < fw_name_count; i++)
bt_dev_err(hdev, "BCM: '%s'", fw_name[i]);
}
Bluetooth: btbcm: Try multiple Patch filenames when loading the Patch firmware Currently the bcm_uart_subver_ and bcm_usb_subver_table-s lack entries for various newer chipsets. This makes the code use just "BCM" as prefix for the filename to pass to request-firmware, making it harder for users to figure out which firmware they need. This especially a problem with UART attached devices where this leads to the filename being "BCM.hcd". If we add new entries to the subver-tables now, then this will change what firmware file the kernel looks for, e.g. currently linux-firmware contains a brcm/BCM-0bb4-0306.hcd file. If we add the info for the BCM20703A1 to the subver table, then this will change to brcm/BCM20703A1-0bb4-0306.hcd. This will cause the file to no longer get loaded breaking Bluetooth for existing users, going against the no regressions policy. To avoid this regression make the btbcm code try multiple filenames, first try the fullname, e.g. BCM20703A1-0bb4-0306.hcd and if that is not found, then fallback to the name with just BCM as prefix. This commit also adds an info message which filename was used, this makes the output look like this for example: [ 57.387867] Bluetooth: hci0: BCM20703A1 [ 57.387870] Bluetooth: hci0: BCM20703A1 (001.001.005) build 0000 [ 57.389438] Bluetooth: hci0: BCM20703A1 'brcm/BCM20703A1-0a5c-6410.hcd' Patch [ 58.681769] Bluetooth: hci0: BCM20703A1 Generic USB 20Mhz fcbga_BU [ 58.681772] Bluetooth: hci0: BCM20703A1 (001.001.005) build 0481 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-18 01:15:31 +08:00
kfree(fw_name);
return 0;
}
EXPORT_SYMBOL_GPL(btbcm_initialize);
int btbcm_finalize(struct hci_dev *hdev, bool *fw_load_done)
{
int err;
/* Re-initialize if necessary */
if (*fw_load_done) {
err = btbcm_initialize(hdev, fw_load_done);
if (err)
return err;
}
btbcm_check_bdaddr(hdev);
set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
return 0;
}
EXPORT_SYMBOL_GPL(btbcm_finalize);
int btbcm_setup_patchram(struct hci_dev *hdev)
{
bool fw_load_done = false;
int err;
/* Initialize */
err = btbcm_initialize(hdev, &fw_load_done);
if (err)
return err;
/* Re-initialize after loading Patch */
return btbcm_finalize(hdev, &fw_load_done);
}
EXPORT_SYMBOL_GPL(btbcm_setup_patchram);
int btbcm_setup_apple(struct hci_dev *hdev)
{
struct sk_buff *skb;
int err;
/* Reset */
err = btbcm_reset(hdev);
if (err)
return err;
/* Read Verbose Config Version Info */
skb = btbcm_read_verbose_config(hdev);
if (!IS_ERR(skb)) {
bt_dev_info(hdev, "BCM: chip id %u build %4.4u",
skb->data[1], get_unaligned_le16(skb->data + 5));
kfree_skb(skb);
}
/* Read USB Product Info */
skb = btbcm_read_usb_product(hdev);
if (!IS_ERR(skb)) {
bt_dev_info(hdev, "BCM: product %4.4x:%4.4x",
get_unaligned_le16(skb->data + 1),
get_unaligned_le16(skb->data + 3));
kfree_skb(skb);
}
/* Read Controller Features */
skb = btbcm_read_controller_features(hdev);
if (!IS_ERR(skb)) {
bt_dev_info(hdev, "BCM: features 0x%2.2x", skb->data[1]);
kfree_skb(skb);
}
/* Read Local Name */
skb = btbcm_read_local_name(hdev);
if (!IS_ERR(skb)) {
bt_dev_info(hdev, "%s", (char *)(skb->data + 1));
kfree_skb(skb);
}
set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
return 0;
}
EXPORT_SYMBOL_GPL(btbcm_setup_apple);
MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth support for Broadcom devices ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");