UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/base/regmap/Kconfig

39 lines
710 B
Plaintext
Raw Normal View History

regmap: Add generic non-memory mapped register access API There are many places in the tree where we implement register access for devices on non-memory mapped buses, especially I2C and SPI. Since hardware designers seem to have settled on a relatively consistent set of register interfaces this can be effectively factored out into shared code. There are a standard set of formats for marshalling data for exchange with the device, with the actual I/O mechanisms generally being simple byte streams. We create an abstraction for marshaling data into formats which can be sent on the control interfaces, and create a standard method for plugging in actual transport underneath that. This is mostly a refactoring and renaming of the bottom level of the existing code for sharing register I/O which we have in ASoC. A subsequent patch in this series converts ASoC to use this. The main difference in interface is that reads return values by writing to a location provided by a pointer rather than in the return value, ensuring we can use the full range of the type for register data. We also use unsigned types rather than ints for the same reason. As some of the devices can have very large register maps the existing ASoC code also contains infrastructure for managing register caches. This cache work will be moved over in a future stage to allow for separate review, the current patch only deals with the physical I/O. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-12 01:59:58 +08:00
# Generic register map support. There are no user servicable options here,
# this is an API intended to be used by other kernel subsystems. These
# subsystems should select the appropriate symbols.
config REGMAP
regmap: Add 1-Wire bus support Add basic support regmap (register map access) API for 1-Wire bus Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-02 15:06:27 +08:00
default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_W1 || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ)
regmap: make LZO cache optional Commit 2cbbb579bcbe3 ("regmap: Add the LZO cache support") added support for LZO compression in regcache, but there were never any users added afterwards. Since LZO support itself has its own size, it currently is rather a deoptimization. So make it optional by introducing a symbol that can be selected by drivers wanting to make use of it. Saves e.g. ~46 kB on MIPS (size of LZO support + regcache LZO code). Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-02 21:15:37 +08:00
select IRQ_DOMAIN if REGMAP_IRQ
bool
config REGCACHE_COMPRESSED
regmap: Add the LZO cache support This patch adds support for LZO compression when storing the register cache. For a typical device whose register map would normally occupy 25kB or 50kB by using the LZO compression technique, one can get down to ~5-7kB. There might be a performance penalty associated with each individual read/write due to decompressing/compressing the underlying cache, however that should not be noticeable. These memory benefits depend on whether the target architecture can get rid of the memory occupied by the original register defaults cache which is marked as __devinitconst. Nevertheless there will be some memory gain even if the target architecture can't get rid of the original register map, this should be around ~30-32kB instead of 50kB. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-19 21:34:03 +08:00
select LZO_COMPRESS
select LZO_DECOMPRESS
regmap: Add generic non-memory mapped register access API There are many places in the tree where we implement register access for devices on non-memory mapped buses, especially I2C and SPI. Since hardware designers seem to have settled on a relatively consistent set of register interfaces this can be effectively factored out into shared code. There are a standard set of formats for marshalling data for exchange with the device, with the actual I/O mechanisms generally being simple byte streams. We create an abstraction for marshaling data into formats which can be sent on the control interfaces, and create a standard method for plugging in actual transport underneath that. This is mostly a refactoring and renaming of the bottom level of the existing code for sharing register I/O which we have in ASoC. A subsequent patch in this series converts ASoC to use this. The main difference in interface is that reads return values by writing to a location provided by a pointer rather than in the return value, ensuring we can use the full range of the type for register data. We also use unsigned types rather than ints for the same reason. As some of the devices can have very large register maps the existing ASoC code also contains infrastructure for managing register caches. This cache work will be moved over in a future stage to allow for separate review, the current patch only deals with the physical I/O. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-12 01:59:58 +08:00
bool
regmap: Add I2C bus support Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-21 02:02:29 +08:00
regmap: ac97: Add generic AC'97 callbacks Use the recently added support for bus operations to provide a standard mapping for AC'97 register I/O. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-11-19 02:45:51 +08:00
config REGMAP_AC97
tristate
regmap: Add I2C bus support Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-21 02:02:29 +08:00
config REGMAP_I2C
tristate
regmap: Add explicit dependencies to catch "select" misuse Add explicit dependencies for the various regmap modules, so Kconfig will print a warning message when another module selects a regmap module without fulfilling its dependencies. Without this, it's much more difficult to find out which module did the offending select. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-17 18:08:57 +08:00
depends on I2C
regmap: Add SPI bus support Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-12 17:42:10 +08:00
config REGMAP_SPI
tristate
regmap: Add explicit dependencies to catch "select" misuse Add explicit dependencies for the various regmap modules, so Kconfig will print a warning message when another module selects a regmap module without fulfilling its dependencies. Without this, it's much more difficult to find out which module did the offending select. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-17 18:08:57 +08:00
depends on SPI
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
regmap: add SPMI support Add basic support for the System Power Management Interface (SPMI) bus. This is a simple implementation which only implements register accesses via the Extended Register Read/Write Long commands. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-29 02:12:35 +08:00
config REGMAP_SPMI
tristate
regmap: Add explicit dependencies to catch "select" misuse Add explicit dependencies for the various regmap modules, so Kconfig will print a warning message when another module selects a regmap module without fulfilling its dependencies. Without this, it's much more difficult to find out which module did the offending select. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-17 18:08:57 +08:00
depends on SPMI
regmap: add SPMI support Add basic support for the System Power Management Interface (SPMI) bus. This is a simple implementation which only implements register accesses via the Extended Register Read/Write Long commands. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-29 02:12:35 +08:00
regmap: Add 1-Wire bus support Add basic support regmap (register map access) API for 1-Wire bus Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-02 15:06:27 +08:00
config REGMAP_W1
tristate
depends on W1
regmap: add MMIO bus support This is a basic memory-mapped-IO bus for regmap. It has the following features and limitations: * Registers themselves may be 8, 16, 32, or 64-bit. 64-bit is only supported on 64-bit platforms. * Register offsets are limited to precisely 32-bit. * IO is performed using readl/writel, with no provision for using the __raw_readl or readl_relaxed variants. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-05 05:48:31 +08:00
config REGMAP_MMIO
tristate
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
config REGMAP_IRQ
bool