OpenCloudOS-Kernel/arch/x86/kernel/i8259.c

435 lines
11 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
#include <linux/linkage.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
x86: Don't include linux/irq.h from asm/hardirq.h The next patch in this series will have to make the definition of irq_cpustat_t available to entering_irq(). Inclusion of asm/hardirq.h into asm/apic.h would cause circular header dependencies like asm/smp.h asm/apic.h asm/hardirq.h linux/irq.h linux/topology.h linux/smp.h asm/smp.h or linux/gfp.h linux/mmzone.h asm/mmzone.h asm/mmzone_64.h asm/smp.h asm/apic.h asm/hardirq.h linux/irq.h linux/irqdesc.h linux/kobject.h linux/sysfs.h linux/kernfs.h linux/idr.h linux/gfp.h and others. This causes compilation errors because of the header guards becoming effective in the second inclusion: symbols/macros that had been defined before wouldn't be available to intermediate headers in the #include chain anymore. A possible workaround would be to move the definition of irq_cpustat_t into its own header and include that from both, asm/hardirq.h and asm/apic.h. However, this wouldn't solve the real problem, namely asm/harirq.h unnecessarily pulling in all the linux/irq.h cruft: nothing in asm/hardirq.h itself requires it. Also, note that there are some other archs, like e.g. arm64, which don't have that #include in their asm/hardirq.h. Remove the linux/irq.h #include from x86' asm/hardirq.h. Fix resulting compilation errors by adding appropriate #includes to *.c files as needed. Note that some of these *.c files could be cleaned up a bit wrt. to their set of #includes, but that should better be done from separate patches, if at all. Signed-off-by: Nicolai Stange <nstange@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2018-07-29 18:15:33 +08:00
#include <linux/irq.h>
#include <linux/timex.h>
#include <linux/random.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/syscore_ops.h>
#include <linux/bitops.h>
#include <linux/acpi.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/atomic.h>
#include <asm/timer.h>
#include <asm/hw_irq.h>
#include <asm/pgtable.h>
#include <asm/desc.h>
#include <asm/apic.h>
#include <asm/i8259.h>
/*
* This is the 'legacy' 8259A Programmable Interrupt Controller,
* present in the majority of PC/AT boxes.
* plus some generic x86 specific things if generic specifics makes
* any sense at all.
*/
static void init_8259A(int auto_eoi);
static int i8259A_auto_eoi;
DEFINE_RAW_SPINLOCK(i8259A_lock);
/*
* 8259A PIC functions to handle ISA devices:
*/
/*
* This contains the irq mask for both 8259A irq controllers,
*/
unsigned int cached_irq_mask = 0xffff;
/*
* Not all IRQs can be routed through the IO-APIC, eg. on certain (older)
* boards the timer interrupt is not really connected to any IO-APIC pin,
* it's fed to the master 8259A's IR0 line only.
*
* Any '1' bit in this mask means the IRQ is routed through the IO-APIC.
* this 'mixed mode' IRQ handling costs nothing because it's only used
* at IRQ setup time.
*/
unsigned long io_apic_irqs;
static void mask_8259A_irq(unsigned int irq)
{
unsigned int mask = 1 << irq;
unsigned long flags;
raw_spin_lock_irqsave(&i8259A_lock, flags);
cached_irq_mask |= mask;
if (irq & 8)
outb(cached_slave_mask, PIC_SLAVE_IMR);
else
outb(cached_master_mask, PIC_MASTER_IMR);
raw_spin_unlock_irqrestore(&i8259A_lock, flags);
}
static void disable_8259A_irq(struct irq_data *data)
{
mask_8259A_irq(data->irq);
}
static void unmask_8259A_irq(unsigned int irq)
{
unsigned int mask = ~(1 << irq);
unsigned long flags;
raw_spin_lock_irqsave(&i8259A_lock, flags);
cached_irq_mask &= mask;
if (irq & 8)
outb(cached_slave_mask, PIC_SLAVE_IMR);
else
outb(cached_master_mask, PIC_MASTER_IMR);
raw_spin_unlock_irqrestore(&i8259A_lock, flags);
}
static void enable_8259A_irq(struct irq_data *data)
{
unmask_8259A_irq(data->irq);
}
static int i8259A_irq_pending(unsigned int irq)
{
unsigned int mask = 1<<irq;
unsigned long flags;
int ret;
raw_spin_lock_irqsave(&i8259A_lock, flags);
if (irq < 8)
ret = inb(PIC_MASTER_CMD) & mask;
else
ret = inb(PIC_SLAVE_CMD) & (mask >> 8);
raw_spin_unlock_irqrestore(&i8259A_lock, flags);
return ret;
}
static void make_8259A_irq(unsigned int irq)
{
disable_irq_nosync(irq);
io_apic_irqs &= ~(1<<irq);
x86/irq: Fix XT-PIC-XT-PIC in /proc/interrupts Fix duplicate XT-PIC seen in /proc/interrupts on x86 systems that make use of 8259A Programmable Interrupt Controllers. Specifically convert output like this: CPU0 0: 76573 XT-PIC-XT-PIC timer 1: 11 XT-PIC-XT-PIC i8042 2: 0 XT-PIC-XT-PIC cascade 4: 8 XT-PIC-XT-PIC serial 6: 3 XT-PIC-XT-PIC floppy 7: 0 XT-PIC-XT-PIC parport0 8: 1 XT-PIC-XT-PIC rtc0 10: 448 XT-PIC-XT-PIC fddi0 12: 23 XT-PIC-XT-PIC eth0 14: 2464 XT-PIC-XT-PIC ide0 NMI: 0 Non-maskable interrupts ERR: 0 to one like this: CPU0 0: 122033 XT-PIC timer 1: 11 XT-PIC i8042 2: 0 XT-PIC cascade 4: 8 XT-PIC serial 6: 3 XT-PIC floppy 7: 0 XT-PIC parport0 8: 1 XT-PIC rtc0 10: 145 XT-PIC fddi0 12: 31 XT-PIC eth0 14: 2245 XT-PIC ide0 NMI: 0 Non-maskable interrupts ERR: 0 that is one like we used to have from ~2.2 till it was changed sometime. The rationale is there is no value in this duplicate information, it merely clutters output and looks ugly. We only have one handler for 8259A interrupts so there is no need to give it a name separate from the name already given to irq_chip. We could define meaningful names for handlers based on bits in the ELCR register on systems that have it or the value of the LTIM bit we use in ICW1 otherwise (hardcoded to 0 though with MCA support gone), to tell edge-triggered and level-triggered inputs apart. While that information does not affect 8259A interrupt handlers it could help people determine which lines are shareable and which are not. That is material for a separate change though. Any tools that parse /proc/interrupts are supposed not to be affected since it was many years we used the format this change converts back to. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/alpine.LFD.2.11.1410260147190.21390@eddie.linux-mips.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-27 00:06:28 +08:00
irq_set_chip_and_handler(irq, &i8259A_chip, handle_level_irq);
enable_irq(irq);
lapic_assign_legacy_vector(irq, true);
}
/*
* This function assumes to be called rarely. Switching between
* 8259A registers is slow.
* This has to be protected by the irq controller spinlock
* before being called.
*/
static inline int i8259A_irq_real(unsigned int irq)
{
int value;
int irqmask = 1<<irq;
if (irq < 8) {
outb(0x0B, PIC_MASTER_CMD); /* ISR register */
value = inb(PIC_MASTER_CMD) & irqmask;
outb(0x0A, PIC_MASTER_CMD); /* back to the IRR register */
return value;
}
outb(0x0B, PIC_SLAVE_CMD); /* ISR register */
value = inb(PIC_SLAVE_CMD) & (irqmask >> 8);
outb(0x0A, PIC_SLAVE_CMD); /* back to the IRR register */
return value;
}
/*
* Careful! The 8259A is a fragile beast, it pretty
* much _has_ to be done exactly like this (mask it
* first, _then_ send the EOI, and the order of EOI
* to the two 8259s is important!
*/
static void mask_and_ack_8259A(struct irq_data *data)
{
unsigned int irq = data->irq;
unsigned int irqmask = 1 << irq;
unsigned long flags;
raw_spin_lock_irqsave(&i8259A_lock, flags);
/*
* Lightweight spurious IRQ detection. We do not want
* to overdo spurious IRQ handling - it's usually a sign
* of hardware problems, so we only do the checks we can
* do without slowing down good hardware unnecessarily.
*
* Note that IRQ7 and IRQ15 (the two spurious IRQs
* usually resulting from the 8259A-1|2 PICs) occur
* even if the IRQ is masked in the 8259A. Thus we
* can check spurious 8259A IRQs without doing the
* quite slow i8259A_irq_real() call for every IRQ.
* This does not cover 100% of spurious interrupts,
* but should be enough to warn the user that there
* is something bad going on ...
*/
if (cached_irq_mask & irqmask)
goto spurious_8259A_irq;
cached_irq_mask |= irqmask;
handle_real_irq:
if (irq & 8) {
inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */
outb(cached_slave_mask, PIC_SLAVE_IMR);
/* 'Specific EOI' to slave */
outb(0x60+(irq&7), PIC_SLAVE_CMD);
/* 'Specific EOI' to master-IRQ2 */
outb(0x60+PIC_CASCADE_IR, PIC_MASTER_CMD);
} else {
inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */
outb(cached_master_mask, PIC_MASTER_IMR);
outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */
}
raw_spin_unlock_irqrestore(&i8259A_lock, flags);
return;
spurious_8259A_irq:
/*
* this is the slow path - should happen rarely.
*/
if (i8259A_irq_real(irq))
/*
* oops, the IRQ _is_ in service according to the
* 8259A - not spurious, go handle it.
*/
goto handle_real_irq;
{
static int spurious_irq_mask;
/*
* At this point we can be sure the IRQ is spurious,
* lets ACK and report it. [once per IRQ]
*/
if (!(spurious_irq_mask & irqmask)) {
printk_deferred(KERN_DEBUG
"spurious 8259A interrupt: IRQ%d.\n", irq);
spurious_irq_mask |= irqmask;
}
atomic_inc(&irq_err_count);
/*
* Theoretically we do not have to handle this IRQ,
* but in Linux this does not cause problems and is
* simpler for us.
*/
goto handle_real_irq;
}
}
struct irq_chip i8259A_chip = {
.name = "XT-PIC",
.irq_mask = disable_8259A_irq,
.irq_disable = disable_8259A_irq,
.irq_unmask = enable_8259A_irq,
.irq_mask_ack = mask_and_ack_8259A,
};
static char irq_trigger[2];
/**
* ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ
*/
static void restore_ELCR(char *trigger)
{
outb(trigger[0], 0x4d0);
outb(trigger[1], 0x4d1);
}
static void save_ELCR(char *trigger)
{
/* IRQ 0,1,2,8,13 are marked as reserved */
trigger[0] = inb(0x4d0) & 0xF8;
trigger[1] = inb(0x4d1) & 0xDE;
}
static void i8259A_resume(void)
{
init_8259A(i8259A_auto_eoi);
restore_ELCR(irq_trigger);
}
static int i8259A_suspend(void)
{
save_ELCR(irq_trigger);
return 0;
}
static void i8259A_shutdown(void)
{
/* Put the i8259A into a quiescent state that
* the kernel initialization code can get it
* out of.
*/
outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */
}
static struct syscore_ops i8259_syscore_ops = {
.suspend = i8259A_suspend,
.resume = i8259A_resume,
.shutdown = i8259A_shutdown,
};
static void mask_8259A(void)
{
unsigned long flags;
raw_spin_lock_irqsave(&i8259A_lock, flags);
outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */
raw_spin_unlock_irqrestore(&i8259A_lock, flags);
}
static void unmask_8259A(void)
{
unsigned long flags;
raw_spin_lock_irqsave(&i8259A_lock, flags);
outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */
raw_spin_unlock_irqrestore(&i8259A_lock, flags);
}
static int probe_8259A(void)
{
unsigned long flags;
x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately The legacy PIC may or may not be available and we need a mechanism to detect the existence of the legacy PIC that is applicable for all hardware (both physical as well as virtual) currently supported by Linux. On Hyper-V, when our legacy firmware presented to the guests, emulates the legacy PIC while when our EFI based firmware is presented we do not emulate the PIC. To support Hyper-V EFI firmware, we had to set the legacy_pic to the null_legacy_pic since we had to bypass PIC based calibration in the early boot code. While, on the EFI firmware, we know we don't emulate the legacy PIC, we need a generic mechanism to detect the presence of the legacy PIC that is not based on boot time state - this became apparent when we tried to get kexec to work on Hyper-V EFI firmware. This patch implements the proposal put forth by H. Peter Anvin <hpa@linux.intel.com>: Write a known value to the PIC data port and read it back. If the value read is the value written, we do have the PIC, if not there is no PIC and we can safely set the legacy_pic to null_legacy_pic. Since the read from an unconnected I/O port returns 0xff, we will use ~(1 << PIC_CASCADE_IR) (0xfb: mask all lines except the cascade line) to probe for the existence of the PIC. In version V1 of the patch, I had cleaned up the code based on comments from Peter. In version V2 of the patch, I have addressed additional comments from Peter. In version V3 of the patch, I have addressed Jan's comments (JBeulich@suse.com). In version V4 of the patch, I have addressed additional comments from Peter. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Link: http://lkml.kernel.org/r/1397501029-29286-1-git-send-email-kys@microsoft.com Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-04-15 02:43:49 +08:00
unsigned char probe_val = ~(1 << PIC_CASCADE_IR);
unsigned char new_val;
/*
* Check to see if we have a PIC.
* Mask all except the cascade and read
* back the value we just wrote. If we don't
* have a PIC, we will read 0xff as opposed to the
* value we wrote.
*/
raw_spin_lock_irqsave(&i8259A_lock, flags);
outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */
x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately The legacy PIC may or may not be available and we need a mechanism to detect the existence of the legacy PIC that is applicable for all hardware (both physical as well as virtual) currently supported by Linux. On Hyper-V, when our legacy firmware presented to the guests, emulates the legacy PIC while when our EFI based firmware is presented we do not emulate the PIC. To support Hyper-V EFI firmware, we had to set the legacy_pic to the null_legacy_pic since we had to bypass PIC based calibration in the early boot code. While, on the EFI firmware, we know we don't emulate the legacy PIC, we need a generic mechanism to detect the presence of the legacy PIC that is not based on boot time state - this became apparent when we tried to get kexec to work on Hyper-V EFI firmware. This patch implements the proposal put forth by H. Peter Anvin <hpa@linux.intel.com>: Write a known value to the PIC data port and read it back. If the value read is the value written, we do have the PIC, if not there is no PIC and we can safely set the legacy_pic to null_legacy_pic. Since the read from an unconnected I/O port returns 0xff, we will use ~(1 << PIC_CASCADE_IR) (0xfb: mask all lines except the cascade line) to probe for the existence of the PIC. In version V1 of the patch, I had cleaned up the code based on comments from Peter. In version V2 of the patch, I have addressed additional comments from Peter. In version V3 of the patch, I have addressed Jan's comments (JBeulich@suse.com). In version V4 of the patch, I have addressed additional comments from Peter. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Link: http://lkml.kernel.org/r/1397501029-29286-1-git-send-email-kys@microsoft.com Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-04-15 02:43:49 +08:00
outb(probe_val, PIC_MASTER_IMR);
new_val = inb(PIC_MASTER_IMR);
if (new_val != probe_val) {
printk(KERN_INFO "Using NULL legacy PIC\n");
legacy_pic = &null_legacy_pic;
}
raw_spin_unlock_irqrestore(&i8259A_lock, flags);
return nr_legacy_irqs();
}
static void init_8259A(int auto_eoi)
{
unsigned long flags;
i8259A_auto_eoi = auto_eoi;
raw_spin_lock_irqsave(&i8259A_lock, flags);
x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately The legacy PIC may or may not be available and we need a mechanism to detect the existence of the legacy PIC that is applicable for all hardware (both physical as well as virtual) currently supported by Linux. On Hyper-V, when our legacy firmware presented to the guests, emulates the legacy PIC while when our EFI based firmware is presented we do not emulate the PIC. To support Hyper-V EFI firmware, we had to set the legacy_pic to the null_legacy_pic since we had to bypass PIC based calibration in the early boot code. While, on the EFI firmware, we know we don't emulate the legacy PIC, we need a generic mechanism to detect the presence of the legacy PIC that is not based on boot time state - this became apparent when we tried to get kexec to work on Hyper-V EFI firmware. This patch implements the proposal put forth by H. Peter Anvin <hpa@linux.intel.com>: Write a known value to the PIC data port and read it back. If the value read is the value written, we do have the PIC, if not there is no PIC and we can safely set the legacy_pic to null_legacy_pic. Since the read from an unconnected I/O port returns 0xff, we will use ~(1 << PIC_CASCADE_IR) (0xfb: mask all lines except the cascade line) to probe for the existence of the PIC. In version V1 of the patch, I had cleaned up the code based on comments from Peter. In version V2 of the patch, I have addressed additional comments from Peter. In version V3 of the patch, I have addressed Jan's comments (JBeulich@suse.com). In version V4 of the patch, I have addressed additional comments from Peter. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Link: http://lkml.kernel.org/r/1397501029-29286-1-git-send-email-kys@microsoft.com Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-04-15 02:43:49 +08:00
outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
/*
* outb_pic - this has to work on a wide range of PC hardware.
*/
outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */
/* ICW2: 8259A-1 IR0-7 mapped to ISA_IRQ_VECTOR(0) */
outb_pic(ISA_IRQ_VECTOR(0), PIC_MASTER_IMR);
/* 8259A-1 (the master) has a slave on IR2 */
outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR);
if (auto_eoi) /* master does Auto EOI */
outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
else /* master expects normal EOI */
outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */
/* ICW2: 8259A-2 IR0-7 mapped to ISA_IRQ_VECTOR(8) */
outb_pic(ISA_IRQ_VECTOR(8), PIC_SLAVE_IMR);
/* 8259A-2 is a slave on master's IR2 */
outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR);
/* (slave's support for AEOI in flat mode is to be investigated) */
outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR);
if (auto_eoi)
/*
* In AEOI mode we just have to mask the interrupt
* when acking.
*/
i8259A_chip.irq_mask_ack = disable_8259A_irq;
else
i8259A_chip.irq_mask_ack = mask_and_ack_8259A;
udelay(100); /* wait for 8259A to initialize */
outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */
raw_spin_unlock_irqrestore(&i8259A_lock, flags);
}
/*
* make i8259 a driver so that we can select pic functions at run time. the goal
* is to make x86 binary compatible among pc compatible and non-pc compatible
* platforms, such as x86 MID.
*/
static void legacy_pic_noop(void) { };
static void legacy_pic_uint_noop(unsigned int unused) { };
static void legacy_pic_int_noop(int unused) { };
static int legacy_pic_irq_pending_noop(unsigned int irq)
{
return 0;
}
static int legacy_pic_probe(void)
{
return 0;
}
struct legacy_pic null_legacy_pic = {
.nr_legacy_irqs = 0,
.chip = &dummy_irq_chip,
.mask = legacy_pic_uint_noop,
.unmask = legacy_pic_uint_noop,
.mask_all = legacy_pic_noop,
.restore_mask = legacy_pic_noop,
.init = legacy_pic_int_noop,
.probe = legacy_pic_probe,
.irq_pending = legacy_pic_irq_pending_noop,
.make_irq = legacy_pic_uint_noop,
};
struct legacy_pic default_legacy_pic = {
.nr_legacy_irqs = NR_IRQS_LEGACY,
.chip = &i8259A_chip,
.mask = mask_8259A_irq,
.unmask = unmask_8259A_irq,
.mask_all = mask_8259A,
.restore_mask = unmask_8259A,
.init = init_8259A,
.probe = probe_8259A,
.irq_pending = i8259A_irq_pending,
.make_irq = make_8259A_irq,
};
struct legacy_pic *legacy_pic = &default_legacy_pic;
EXPORT_SYMBOL(legacy_pic);
static int __init i8259A_init_ops(void)
{
if (legacy_pic == &default_legacy_pic)
register_syscore_ops(&i8259_syscore_ops);
return 0;
}
device_initcall(i8259A_init_ops);