OpenCloudOS-Kernel/fs/ext4/file.c

263 lines
7.3 KiB
C
Raw Normal View History

/*
* linux/fs/ext4/file.c
*
* Copyright (C) 1992, 1993, 1994, 1995
* Remy Card (card@masi.ibp.fr)
* Laboratoire MASI - Institut Blaise Pascal
* Universite Pierre et Marie Curie (Paris VI)
*
* from
*
* linux/fs/minix/file.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* ext4 fs regular file handling primitives
*
* 64-bit file support on 64-bit platforms by Jakub Jelinek
* (jj@sunsite.ms.mff.cuni.cz)
*/
#include <linux/time.h>
#include <linux/fs.h>
#include <linux/jbd2.h>
#include <linux/mount.h>
#include <linux/path.h>
#include <linux/quotaops.h>
#include "ext4.h"
#include "ext4_jbd2.h"
#include "xattr.h"
#include "acl.h"
/*
* Called when an inode is released. Note that this is different
* from ext4_file_open: open gets called at every open, but release
* gets called only when /all/ the files are closed.
*/
static int ext4_release_file(struct inode *inode, struct file *filp)
{
if (ext4_test_inode_state(inode, EXT4_STATE_DA_ALLOC_CLOSE)) {
ext4_alloc_da_blocks(inode);
ext4_clear_inode_state(inode, EXT4_STATE_DA_ALLOC_CLOSE);
}
/* if we are the last writer on the inode, drop the block reservation */
if ((filp->f_mode & FMODE_WRITE) &&
(atomic_read(&inode->i_writecount) == 1) &&
!EXT4_I(inode)->i_reserved_data_blocks)
{
down_write(&EXT4_I(inode)->i_data_sem);
ext4_discard_preallocations(inode);
up_write(&EXT4_I(inode)->i_data_sem);
}
if (is_dx(inode) && filp->private_data)
ext4_htree_free_dir_info(filp->private_data);
return 0;
}
ext4: serialize unaligned asynchronous DIO ext4 has a data corruption case when doing non-block-aligned asynchronous direct IO into a sparse file, as demonstrated by xfstest 240. The root cause is that while ext4 preallocates space in the hole, mappings of that space still look "new" and dio_zero_block() will zero out the unwritten portions. When more than one AIO thread is going, they both find this "new" block and race to zero out their portion; this is uncoordinated and causes data corruption. Dave Chinner fixed this for xfs by simply serializing all unaligned asynchronous direct IO. I've done the same here. The difference is that we only wait on conversions, not all IO. This is a very big hammer, and I'm not very pleased with stuffing this into ext4_file_write(). But since ext4 is DIO_LOCKING, we need to serialize it at this high level. I tried to move this into ext4_ext_direct_IO, but by then we have the i_mutex already, and we will wait on the work queue to do conversions - which must also take the i_mutex. So that won't work. This was originally exposed by qemu-kvm installing to a raw disk image with a normal sector-63 alignment. I've tested a backport of this patch with qemu, and it does avoid the corruption. It is also quite a lot slower (14 min for package installs, vs. 8 min for well-aligned) but I'll take slow correctness over fast corruption any day. Mingming suggested that we can track outstanding conversions, and wait on those so that non-sparse files won't be affected, and I've implemented that here; unaligned AIO to nonsparse files won't take a perf hit. [tytso@mit.edu: Keep the mutex as a hashed array instead of bloating the ext4 inode] [tytso@mit.edu: Fix up namespace issues so that global variables are protected with an "ext4_" prefix.] Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-02-12 21:17:34 +08:00
static void ext4_aiodio_wait(struct inode *inode)
{
wait_queue_head_t *wq = ext4_ioend_wq(inode);
wait_event(*wq, (atomic_read(&EXT4_I(inode)->i_aiodio_unwritten) == 0));
}
/*
* This tests whether the IO in question is block-aligned or not.
* Ext4 utilizes unwritten extents when hole-filling during direct IO, and they
* are converted to written only after the IO is complete. Until they are
* mapped, these blocks appear as holes, so dio_zero_block() will assume that
* it needs to zero out portions of the start and/or end block. If 2 AIO
* threads are at work on the same unwritten block, they must be synchronized
* or one thread will zero the other's data, causing corruption.
*/
static int
ext4_unaligned_aio(struct inode *inode, const struct iovec *iov,
unsigned long nr_segs, loff_t pos)
{
struct super_block *sb = inode->i_sb;
int blockmask = sb->s_blocksize - 1;
size_t count = iov_length(iov, nr_segs);
loff_t final_size = pos + count;
if (pos >= inode->i_size)
return 0;
if ((pos & blockmask) || (final_size & blockmask))
return 1;
return 0;
}
static ssize_t
ext4_file_write(struct kiocb *iocb, const struct iovec *iov,
unsigned long nr_segs, loff_t pos)
{
struct inode *inode = iocb->ki_filp->f_path.dentry->d_inode;
ext4: serialize unaligned asynchronous DIO ext4 has a data corruption case when doing non-block-aligned asynchronous direct IO into a sparse file, as demonstrated by xfstest 240. The root cause is that while ext4 preallocates space in the hole, mappings of that space still look "new" and dio_zero_block() will zero out the unwritten portions. When more than one AIO thread is going, they both find this "new" block and race to zero out their portion; this is uncoordinated and causes data corruption. Dave Chinner fixed this for xfs by simply serializing all unaligned asynchronous direct IO. I've done the same here. The difference is that we only wait on conversions, not all IO. This is a very big hammer, and I'm not very pleased with stuffing this into ext4_file_write(). But since ext4 is DIO_LOCKING, we need to serialize it at this high level. I tried to move this into ext4_ext_direct_IO, but by then we have the i_mutex already, and we will wait on the work queue to do conversions - which must also take the i_mutex. So that won't work. This was originally exposed by qemu-kvm installing to a raw disk image with a normal sector-63 alignment. I've tested a backport of this patch with qemu, and it does avoid the corruption. It is also quite a lot slower (14 min for package installs, vs. 8 min for well-aligned) but I'll take slow correctness over fast corruption any day. Mingming suggested that we can track outstanding conversions, and wait on those so that non-sparse files won't be affected, and I've implemented that here; unaligned AIO to nonsparse files won't take a perf hit. [tytso@mit.edu: Keep the mutex as a hashed array instead of bloating the ext4 inode] [tytso@mit.edu: Fix up namespace issues so that global variables are protected with an "ext4_" prefix.] Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-02-12 21:17:34 +08:00
int unaligned_aio = 0;
int ret;
/*
* If we have encountered a bitmap-format file, the size limit
* is smaller than s_maxbytes, which is for extent-mapped files.
*/
if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) {
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
size_t length = iov_length(iov, nr_segs);
if ((pos > sbi->s_bitmap_maxbytes ||
(pos == sbi->s_bitmap_maxbytes && length > 0)))
return -EFBIG;
if (pos + length > sbi->s_bitmap_maxbytes) {
nr_segs = iov_shorten((struct iovec *)iov, nr_segs,
sbi->s_bitmap_maxbytes - pos);
}
ext4: serialize unaligned asynchronous DIO ext4 has a data corruption case when doing non-block-aligned asynchronous direct IO into a sparse file, as demonstrated by xfstest 240. The root cause is that while ext4 preallocates space in the hole, mappings of that space still look "new" and dio_zero_block() will zero out the unwritten portions. When more than one AIO thread is going, they both find this "new" block and race to zero out their portion; this is uncoordinated and causes data corruption. Dave Chinner fixed this for xfs by simply serializing all unaligned asynchronous direct IO. I've done the same here. The difference is that we only wait on conversions, not all IO. This is a very big hammer, and I'm not very pleased with stuffing this into ext4_file_write(). But since ext4 is DIO_LOCKING, we need to serialize it at this high level. I tried to move this into ext4_ext_direct_IO, but by then we have the i_mutex already, and we will wait on the work queue to do conversions - which must also take the i_mutex. So that won't work. This was originally exposed by qemu-kvm installing to a raw disk image with a normal sector-63 alignment. I've tested a backport of this patch with qemu, and it does avoid the corruption. It is also quite a lot slower (14 min for package installs, vs. 8 min for well-aligned) but I'll take slow correctness over fast corruption any day. Mingming suggested that we can track outstanding conversions, and wait on those so that non-sparse files won't be affected, and I've implemented that here; unaligned AIO to nonsparse files won't take a perf hit. [tytso@mit.edu: Keep the mutex as a hashed array instead of bloating the ext4 inode] [tytso@mit.edu: Fix up namespace issues so that global variables are protected with an "ext4_" prefix.] Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-02-12 21:17:34 +08:00
} else if (unlikely((iocb->ki_filp->f_flags & O_DIRECT) &&
!is_sync_kiocb(iocb))) {
unaligned_aio = ext4_unaligned_aio(inode, iov, nr_segs, pos);
}
ext4: serialize unaligned asynchronous DIO ext4 has a data corruption case when doing non-block-aligned asynchronous direct IO into a sparse file, as demonstrated by xfstest 240. The root cause is that while ext4 preallocates space in the hole, mappings of that space still look "new" and dio_zero_block() will zero out the unwritten portions. When more than one AIO thread is going, they both find this "new" block and race to zero out their portion; this is uncoordinated and causes data corruption. Dave Chinner fixed this for xfs by simply serializing all unaligned asynchronous direct IO. I've done the same here. The difference is that we only wait on conversions, not all IO. This is a very big hammer, and I'm not very pleased with stuffing this into ext4_file_write(). But since ext4 is DIO_LOCKING, we need to serialize it at this high level. I tried to move this into ext4_ext_direct_IO, but by then we have the i_mutex already, and we will wait on the work queue to do conversions - which must also take the i_mutex. So that won't work. This was originally exposed by qemu-kvm installing to a raw disk image with a normal sector-63 alignment. I've tested a backport of this patch with qemu, and it does avoid the corruption. It is also quite a lot slower (14 min for package installs, vs. 8 min for well-aligned) but I'll take slow correctness over fast corruption any day. Mingming suggested that we can track outstanding conversions, and wait on those so that non-sparse files won't be affected, and I've implemented that here; unaligned AIO to nonsparse files won't take a perf hit. [tytso@mit.edu: Keep the mutex as a hashed array instead of bloating the ext4 inode] [tytso@mit.edu: Fix up namespace issues so that global variables are protected with an "ext4_" prefix.] Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-02-12 21:17:34 +08:00
/* Unaligned direct AIO must be serialized; see comment above */
if (unaligned_aio) {
static unsigned long unaligned_warn_time;
/* Warn about this once per day */
if (printk_timed_ratelimit(&unaligned_warn_time, 60*60*24*HZ))
ext4_msg(inode->i_sb, KERN_WARNING,
"Unaligned AIO/DIO on inode %ld by %s; "
"performance will be poor.",
inode->i_ino, current->comm);
mutex_lock(ext4_aio_mutex(inode));
ext4_aiodio_wait(inode);
}
ret = generic_file_aio_write(iocb, iov, nr_segs, pos);
if (unaligned_aio)
mutex_unlock(ext4_aio_mutex(inode));
return ret;
}
static const struct vm_operations_struct ext4_file_vm_ops = {
.fault = filemap_fault,
.page_mkwrite = ext4_page_mkwrite,
};
static int ext4_file_mmap(struct file *file, struct vm_area_struct *vma)
{
struct address_space *mapping = file->f_mapping;
if (!mapping->a_ops->readpage)
return -ENOEXEC;
file_accessed(file);
vma->vm_ops = &ext4_file_vm_ops;
vma->vm_flags |= VM_CAN_NONLINEAR;
return 0;
}
static int ext4_file_open(struct inode * inode, struct file * filp)
{
struct super_block *sb = inode->i_sb;
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
struct ext4_inode_info *ei = EXT4_I(inode);
struct vfsmount *mnt = filp->f_path.mnt;
struct path path;
char buf[64], *cp;
if (unlikely(!(sbi->s_mount_flags & EXT4_MF_MNTDIR_SAMPLED) &&
!(sb->s_flags & MS_RDONLY))) {
sbi->s_mount_flags |= EXT4_MF_MNTDIR_SAMPLED;
/*
* Sample where the filesystem has been mounted and
* store it in the superblock for sysadmin convenience
* when trying to sort through large numbers of block
* devices or filesystem images.
*/
memset(buf, 0, sizeof(buf));
path.mnt = mnt;
path.dentry = mnt->mnt_root;
cp = d_path(&path, buf, sizeof(buf));
if (!IS_ERR(cp)) {
strlcpy(sbi->s_es->s_last_mounted, cp,
sizeof(sbi->s_es->s_last_mounted));
ext4_mark_super_dirty(sb);
}
}
/*
* Set up the jbd2_inode if we are opening the inode for
* writing and the journal is present
*/
if (sbi->s_journal && !ei->jinode && (filp->f_mode & FMODE_WRITE)) {
struct jbd2_inode *jinode = jbd2_alloc_inode(GFP_KERNEL);
spin_lock(&inode->i_lock);
if (!ei->jinode) {
if (!jinode) {
spin_unlock(&inode->i_lock);
return -ENOMEM;
}
ei->jinode = jinode;
jbd2_journal_init_jbd_inode(ei->jinode, inode);
jinode = NULL;
}
spin_unlock(&inode->i_lock);
if (unlikely(jinode != NULL))
jbd2_free_inode(jinode);
}
return dquot_file_open(inode, filp);
}
ext4: improve llseek error handling for overly large seek offsets The llseek system call should return EINVAL if passed a seek offset which results in a write error. What this maximum offset should be depends on whether or not the huge_file file system feature is set, and whether or not the file is extent based or not. If the file has no "EXT4_EXTENTS_FL" flag, the maximum size which can be written (write systemcall) is different from the maximum size which can be sought (lseek systemcall). For example, the following 2 cases demonstrates the differences between the maximum size which can be written, versus the seek offset allowed by the llseek system call: #1: mkfs.ext3 <dev>; mount -t ext4 <dev> #2: mkfs.ext3 <dev>; tune2fs -Oextent,huge_file <dev>; mount -t ext4 <dev> Table. the max file size which we can write or seek at each filesystem feature tuning and file flag setting +============+===============================+===============================+ | \ File flag| | | | \ | !EXT4_EXTENTS_FL | EXT4_EXTETNS_FL | |case \| | | +------------+-------------------------------+-------------------------------+ | #1 | write: 2194719883264 | write: -------------- | | | seek: 2199023251456 | seek: -------------- | +------------+-------------------------------+-------------------------------+ | #2 | write: 4402345721856 | write: 17592186044415 | | | seek: 17592186044415 | seek: 17592186044415 | +------------+-------------------------------+-------------------------------+ The differences exist because ext4 has 2 maxbytes which are sb->s_maxbytes (= extent-mapped maxbytes) and EXT4_SB(sb)->s_bitmap_maxbytes (= block-mapped maxbytes). Although generic_file_llseek uses only extent-mapped maxbytes. (llseek of ext4_file_operations is generic_file_llseek which uses sb->s_maxbytes.) Therefore we create ext4 llseek function which uses 2 maxbytes. The new own function originates from generic_file_llseek(). If the file flag, "EXT4_EXTENTS_FL" is not set, the function alters inode->i_sb->s_maxbytes into EXT4_SB(inode->i_sb)->s_bitmap_maxbytes. Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca>
2010-10-28 09:30:06 +08:00
/*
* ext4_llseek() copied from generic_file_llseek() to handle both
* block-mapped and extent-mapped maxbytes values. This should
* otherwise be identical with generic_file_llseek().
*/
loff_t ext4_llseek(struct file *file, loff_t offset, int origin)
{
struct inode *inode = file->f_mapping->host;
loff_t maxbytes;
if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
maxbytes = EXT4_SB(inode->i_sb)->s_bitmap_maxbytes;
else
maxbytes = inode->i_sb->s_maxbytes;
return generic_file_llseek_size(file, offset, origin, maxbytes);
ext4: improve llseek error handling for overly large seek offsets The llseek system call should return EINVAL if passed a seek offset which results in a write error. What this maximum offset should be depends on whether or not the huge_file file system feature is set, and whether or not the file is extent based or not. If the file has no "EXT4_EXTENTS_FL" flag, the maximum size which can be written (write systemcall) is different from the maximum size which can be sought (lseek systemcall). For example, the following 2 cases demonstrates the differences between the maximum size which can be written, versus the seek offset allowed by the llseek system call: #1: mkfs.ext3 <dev>; mount -t ext4 <dev> #2: mkfs.ext3 <dev>; tune2fs -Oextent,huge_file <dev>; mount -t ext4 <dev> Table. the max file size which we can write or seek at each filesystem feature tuning and file flag setting +============+===============================+===============================+ | \ File flag| | | | \ | !EXT4_EXTENTS_FL | EXT4_EXTETNS_FL | |case \| | | +------------+-------------------------------+-------------------------------+ | #1 | write: 2194719883264 | write: -------------- | | | seek: 2199023251456 | seek: -------------- | +------------+-------------------------------+-------------------------------+ | #2 | write: 4402345721856 | write: 17592186044415 | | | seek: 17592186044415 | seek: 17592186044415 | +------------+-------------------------------+-------------------------------+ The differences exist because ext4 has 2 maxbytes which are sb->s_maxbytes (= extent-mapped maxbytes) and EXT4_SB(sb)->s_bitmap_maxbytes (= block-mapped maxbytes). Although generic_file_llseek uses only extent-mapped maxbytes. (llseek of ext4_file_operations is generic_file_llseek which uses sb->s_maxbytes.) Therefore we create ext4 llseek function which uses 2 maxbytes. The new own function originates from generic_file_llseek(). If the file flag, "EXT4_EXTENTS_FL" is not set, the function alters inode->i_sb->s_maxbytes into EXT4_SB(inode->i_sb)->s_bitmap_maxbytes. Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca>
2010-10-28 09:30:06 +08:00
}
const struct file_operations ext4_file_operations = {
ext4: improve llseek error handling for overly large seek offsets The llseek system call should return EINVAL if passed a seek offset which results in a write error. What this maximum offset should be depends on whether or not the huge_file file system feature is set, and whether or not the file is extent based or not. If the file has no "EXT4_EXTENTS_FL" flag, the maximum size which can be written (write systemcall) is different from the maximum size which can be sought (lseek systemcall). For example, the following 2 cases demonstrates the differences between the maximum size which can be written, versus the seek offset allowed by the llseek system call: #1: mkfs.ext3 <dev>; mount -t ext4 <dev> #2: mkfs.ext3 <dev>; tune2fs -Oextent,huge_file <dev>; mount -t ext4 <dev> Table. the max file size which we can write or seek at each filesystem feature tuning and file flag setting +============+===============================+===============================+ | \ File flag| | | | \ | !EXT4_EXTENTS_FL | EXT4_EXTETNS_FL | |case \| | | +------------+-------------------------------+-------------------------------+ | #1 | write: 2194719883264 | write: -------------- | | | seek: 2199023251456 | seek: -------------- | +------------+-------------------------------+-------------------------------+ | #2 | write: 4402345721856 | write: 17592186044415 | | | seek: 17592186044415 | seek: 17592186044415 | +------------+-------------------------------+-------------------------------+ The differences exist because ext4 has 2 maxbytes which are sb->s_maxbytes (= extent-mapped maxbytes) and EXT4_SB(sb)->s_bitmap_maxbytes (= block-mapped maxbytes). Although generic_file_llseek uses only extent-mapped maxbytes. (llseek of ext4_file_operations is generic_file_llseek which uses sb->s_maxbytes.) Therefore we create ext4 llseek function which uses 2 maxbytes. The new own function originates from generic_file_llseek(). If the file flag, "EXT4_EXTENTS_FL" is not set, the function alters inode->i_sb->s_maxbytes into EXT4_SB(inode->i_sb)->s_bitmap_maxbytes. Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca>
2010-10-28 09:30:06 +08:00
.llseek = ext4_llseek,
.read = do_sync_read,
.write = do_sync_write,
.aio_read = generic_file_aio_read,
.aio_write = ext4_file_write,
.unlocked_ioctl = ext4_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = ext4_compat_ioctl,
#endif
.mmap = ext4_file_mmap,
.open = ext4_file_open,
.release = ext4_release_file,
.fsync = ext4_sync_file,
.splice_read = generic_file_splice_read,
.splice_write = generic_file_splice_write,
.fallocate = ext4_fallocate,
};
const struct inode_operations ext4_file_inode_operations = {
.setattr = ext4_setattr,
.getattr = ext4_getattr,
#ifdef CONFIG_EXT4_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.listxattr = ext4_listxattr,
.removexattr = generic_removexattr,
#endif
.get_acl = ext4_get_acl,
.fiemap = ext4_fiemap,
};