OpenCloudOS-Kernel/mm/shrinker_debug.c

286 lines
6.3 KiB
C
Raw Normal View History

mm: shrinkers: introduce debugfs interface for memory shrinkers This commit introduces the /sys/kernel/debug/shrinker debugfs interface which provides an ability to observe the state of individual kernel memory shrinkers. Because the feature adds some memory overhead (which shouldn't be large unless there is a huge amount of registered shrinkers), it's guarded by a config option (enabled by default). This commit introduces the "count" interface for each shrinker registered in the system. The output is in the following format: <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... ... To reduce the size of output on machines with many thousands cgroups, if the total number of objects on all nodes is 0, the line is omitted. If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as cgroup inode id. If the shrinker is not numa-aware, 0's are printed for all nodes except the first one. This commit gives debugfs entries simple numeric names, which are not very convenient. The following commit in the series will provide shrinkers with more meaningful names. [akpm@linux-foundation.org: remove WARN_ON_ONCE(), per Roman] Reported-by: syzbot+300d27c79fe6d4cbcc39@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/20220601032227.4076670-3-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:23 +08:00
// SPDX-License-Identifier: GPL-2.0
#include <linux/idr.h>
#include <linux/slab.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/shrinker.h>
#include <linux/memcontrol.h>
#include <linux/srcu.h>
mm: shrinkers: introduce debugfs interface for memory shrinkers This commit introduces the /sys/kernel/debug/shrinker debugfs interface which provides an ability to observe the state of individual kernel memory shrinkers. Because the feature adds some memory overhead (which shouldn't be large unless there is a huge amount of registered shrinkers), it's guarded by a config option (enabled by default). This commit introduces the "count" interface for each shrinker registered in the system. The output is in the following format: <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... ... To reduce the size of output on machines with many thousands cgroups, if the total number of objects on all nodes is 0, the line is omitted. If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as cgroup inode id. If the shrinker is not numa-aware, 0's are printed for all nodes except the first one. This commit gives debugfs entries simple numeric names, which are not very convenient. The following commit in the series will provide shrinkers with more meaningful names. [akpm@linux-foundation.org: remove WARN_ON_ONCE(), per Roman] Reported-by: syzbot+300d27c79fe6d4cbcc39@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/20220601032227.4076670-3-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:23 +08:00
/* defined in vmscan.c */
Revert "mm: shrinkers: convert shrinker_rwsem to mutex" Patch series "revert shrinker_srcu related changes". This patch (of 7): This reverts commit cf2e309ebca7bb0916771839f9b580b06c778530. Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec test case [1], which is caused by commit f95bdb700bc6 ("mm: vmscan: make global slab shrink lockless"). The root cause is that SRCU has to be careful to not frequently check for SRCU read-side critical section exits. Therefore, even if no one is currently in the SRCU read-side critical section, synchronize_srcu() cannot return quickly. That's why unregister_shrinker() has become slower. After discussion, we will try to use the refcount+RCU method [2] proposed by Dave Chinner to continue to re-implement the lockless slab shrink. So revert the shrinker_mutex back to shrinker_rwsem first. [1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/ [2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/ Link: https://lkml.kernel.org/r/20230609081518.3039120-1-qi.zheng@linux.dev Link: https://lkml.kernel.org/r/20230609081518.3039120-2-qi.zheng@linux.dev Reported-by: kernel test robot <yujie.liu@intel.com> Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yujie Liu <yujie.liu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 16:15:12 +08:00
extern struct rw_semaphore shrinker_rwsem;
mm: shrinkers: introduce debugfs interface for memory shrinkers This commit introduces the /sys/kernel/debug/shrinker debugfs interface which provides an ability to observe the state of individual kernel memory shrinkers. Because the feature adds some memory overhead (which shouldn't be large unless there is a huge amount of registered shrinkers), it's guarded by a config option (enabled by default). This commit introduces the "count" interface for each shrinker registered in the system. The output is in the following format: <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... ... To reduce the size of output on machines with many thousands cgroups, if the total number of objects on all nodes is 0, the line is omitted. If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as cgroup inode id. If the shrinker is not numa-aware, 0's are printed for all nodes except the first one. This commit gives debugfs entries simple numeric names, which are not very convenient. The following commit in the series will provide shrinkers with more meaningful names. [akpm@linux-foundation.org: remove WARN_ON_ONCE(), per Roman] Reported-by: syzbot+300d27c79fe6d4cbcc39@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/20220601032227.4076670-3-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:23 +08:00
extern struct list_head shrinker_list;
extern struct srcu_struct shrinker_srcu;
mm: shrinkers: introduce debugfs interface for memory shrinkers This commit introduces the /sys/kernel/debug/shrinker debugfs interface which provides an ability to observe the state of individual kernel memory shrinkers. Because the feature adds some memory overhead (which shouldn't be large unless there is a huge amount of registered shrinkers), it's guarded by a config option (enabled by default). This commit introduces the "count" interface for each shrinker registered in the system. The output is in the following format: <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... ... To reduce the size of output on machines with many thousands cgroups, if the total number of objects on all nodes is 0, the line is omitted. If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as cgroup inode id. If the shrinker is not numa-aware, 0's are printed for all nodes except the first one. This commit gives debugfs entries simple numeric names, which are not very convenient. The following commit in the series will provide shrinkers with more meaningful names. [akpm@linux-foundation.org: remove WARN_ON_ONCE(), per Roman] Reported-by: syzbot+300d27c79fe6d4cbcc39@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/20220601032227.4076670-3-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:23 +08:00
static DEFINE_IDA(shrinker_debugfs_ida);
static struct dentry *shrinker_debugfs_root;
static unsigned long shrinker_count_objects(struct shrinker *shrinker,
struct mem_cgroup *memcg,
unsigned long *count_per_node)
{
unsigned long nr, total = 0;
int nid;
for_each_node(nid) {
if (nid == 0 || (shrinker->flags & SHRINKER_NUMA_AWARE)) {
struct shrink_control sc = {
.gfp_mask = GFP_KERNEL,
.nid = nid,
.memcg = memcg,
};
nr = shrinker->count_objects(shrinker, &sc);
if (nr == SHRINK_EMPTY)
nr = 0;
} else {
nr = 0;
}
count_per_node[nid] = nr;
total += nr;
}
return total;
}
static int shrinker_debugfs_count_show(struct seq_file *m, void *v)
{
struct shrinker *shrinker = m->private;
unsigned long *count_per_node;
struct mem_cgroup *memcg;
unsigned long total;
bool memcg_aware;
int ret = 0, nid, srcu_idx;
mm: shrinkers: introduce debugfs interface for memory shrinkers This commit introduces the /sys/kernel/debug/shrinker debugfs interface which provides an ability to observe the state of individual kernel memory shrinkers. Because the feature adds some memory overhead (which shouldn't be large unless there is a huge amount of registered shrinkers), it's guarded by a config option (enabled by default). This commit introduces the "count" interface for each shrinker registered in the system. The output is in the following format: <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... ... To reduce the size of output on machines with many thousands cgroups, if the total number of objects on all nodes is 0, the line is omitted. If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as cgroup inode id. If the shrinker is not numa-aware, 0's are printed for all nodes except the first one. This commit gives debugfs entries simple numeric names, which are not very convenient. The following commit in the series will provide shrinkers with more meaningful names. [akpm@linux-foundation.org: remove WARN_ON_ONCE(), per Roman] Reported-by: syzbot+300d27c79fe6d4cbcc39@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/20220601032227.4076670-3-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:23 +08:00
count_per_node = kcalloc(nr_node_ids, sizeof(unsigned long), GFP_KERNEL);
if (!count_per_node)
return -ENOMEM;
srcu_idx = srcu_read_lock(&shrinker_srcu);
mm: shrinkers: introduce debugfs interface for memory shrinkers This commit introduces the /sys/kernel/debug/shrinker debugfs interface which provides an ability to observe the state of individual kernel memory shrinkers. Because the feature adds some memory overhead (which shouldn't be large unless there is a huge amount of registered shrinkers), it's guarded by a config option (enabled by default). This commit introduces the "count" interface for each shrinker registered in the system. The output is in the following format: <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... ... To reduce the size of output on machines with many thousands cgroups, if the total number of objects on all nodes is 0, the line is omitted. If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as cgroup inode id. If the shrinker is not numa-aware, 0's are printed for all nodes except the first one. This commit gives debugfs entries simple numeric names, which are not very convenient. The following commit in the series will provide shrinkers with more meaningful names. [akpm@linux-foundation.org: remove WARN_ON_ONCE(), per Roman] Reported-by: syzbot+300d27c79fe6d4cbcc39@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/20220601032227.4076670-3-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:23 +08:00
memcg_aware = shrinker->flags & SHRINKER_MEMCG_AWARE;
memcg = mem_cgroup_iter(NULL, NULL, NULL);
do {
if (memcg && !mem_cgroup_online(memcg))
continue;
total = shrinker_count_objects(shrinker,
memcg_aware ? memcg : NULL,
count_per_node);
if (total) {
seq_printf(m, "%lu", mem_cgroup_ino(memcg));
for_each_node(nid)
seq_printf(m, " %lu", count_per_node[nid]);
seq_putc(m, '\n');
}
if (!memcg_aware) {
mem_cgroup_iter_break(NULL, memcg);
break;
}
if (signal_pending(current)) {
mem_cgroup_iter_break(NULL, memcg);
ret = -EINTR;
break;
}
} while ((memcg = mem_cgroup_iter(NULL, memcg, NULL)) != NULL);
srcu_read_unlock(&shrinker_srcu, srcu_idx);
mm: shrinkers: introduce debugfs interface for memory shrinkers This commit introduces the /sys/kernel/debug/shrinker debugfs interface which provides an ability to observe the state of individual kernel memory shrinkers. Because the feature adds some memory overhead (which shouldn't be large unless there is a huge amount of registered shrinkers), it's guarded by a config option (enabled by default). This commit introduces the "count" interface for each shrinker registered in the system. The output is in the following format: <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... ... To reduce the size of output on machines with many thousands cgroups, if the total number of objects on all nodes is 0, the line is omitted. If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as cgroup inode id. If the shrinker is not numa-aware, 0's are printed for all nodes except the first one. This commit gives debugfs entries simple numeric names, which are not very convenient. The following commit in the series will provide shrinkers with more meaningful names. [akpm@linux-foundation.org: remove WARN_ON_ONCE(), per Roman] Reported-by: syzbot+300d27c79fe6d4cbcc39@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/20220601032227.4076670-3-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:23 +08:00
kfree(count_per_node);
return ret;
}
DEFINE_SHOW_ATTRIBUTE(shrinker_debugfs_count);
static int shrinker_debugfs_scan_open(struct inode *inode, struct file *file)
{
file->private_data = inode->i_private;
return nonseekable_open(inode, file);
}
static ssize_t shrinker_debugfs_scan_write(struct file *file,
const char __user *buf,
size_t size, loff_t *pos)
{
struct shrinker *shrinker = file->private_data;
unsigned long nr_to_scan = 0, ino, read_len;
struct shrink_control sc = {
.gfp_mask = GFP_KERNEL,
};
struct mem_cgroup *memcg = NULL;
int nid, srcu_idx;
char kbuf[72];
read_len = size < (sizeof(kbuf) - 1) ? size : (sizeof(kbuf) - 1);
if (copy_from_user(kbuf, buf, read_len))
return -EFAULT;
kbuf[read_len] = '\0';
if (sscanf(kbuf, "%lu %d %lu", &ino, &nid, &nr_to_scan) != 3)
return -EINVAL;
if (nid < 0 || nid >= nr_node_ids)
return -EINVAL;
if (nr_to_scan == 0)
return size;
if (shrinker->flags & SHRINKER_MEMCG_AWARE) {
memcg = mem_cgroup_get_from_ino(ino);
if (!memcg || IS_ERR(memcg))
return -ENOENT;
if (!mem_cgroup_online(memcg)) {
mem_cgroup_put(memcg);
return -ENOENT;
}
} else if (ino != 0) {
return -EINVAL;
}
srcu_idx = srcu_read_lock(&shrinker_srcu);
sc.nid = nid;
sc.memcg = memcg;
sc.nr_to_scan = nr_to_scan;
sc.nr_scanned = nr_to_scan;
shrinker->scan_objects(shrinker, &sc);
srcu_read_unlock(&shrinker_srcu, srcu_idx);
mem_cgroup_put(memcg);
return size;
}
static const struct file_operations shrinker_debugfs_scan_fops = {
.owner = THIS_MODULE,
.open = shrinker_debugfs_scan_open,
.write = shrinker_debugfs_scan_write,
};
mm: shrinkers: introduce debugfs interface for memory shrinkers This commit introduces the /sys/kernel/debug/shrinker debugfs interface which provides an ability to observe the state of individual kernel memory shrinkers. Because the feature adds some memory overhead (which shouldn't be large unless there is a huge amount of registered shrinkers), it's guarded by a config option (enabled by default). This commit introduces the "count" interface for each shrinker registered in the system. The output is in the following format: <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... ... To reduce the size of output on machines with many thousands cgroups, if the total number of objects on all nodes is 0, the line is omitted. If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as cgroup inode id. If the shrinker is not numa-aware, 0's are printed for all nodes except the first one. This commit gives debugfs entries simple numeric names, which are not very convenient. The following commit in the series will provide shrinkers with more meaningful names. [akpm@linux-foundation.org: remove WARN_ON_ONCE(), per Roman] Reported-by: syzbot+300d27c79fe6d4cbcc39@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/20220601032227.4076670-3-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:23 +08:00
int shrinker_debugfs_add(struct shrinker *shrinker)
{
struct dentry *entry;
mm: shrinkers: provide shrinkers with names Currently shrinkers are anonymous objects. For debugging purposes they can be identified by count/scan function names, but it's not always useful: e.g. for superblock's shrinkers it's nice to have at least an idea of to which superblock the shrinker belongs. This commit adds names to shrinkers. register_shrinker() and prealloc_shrinker() functions are extended to take a format and arguments to master a name. In some cases it's not possible to determine a good name at the time when a shrinker is allocated. For such cases shrinker_debugfs_rename() is provided. The expected format is: <subsystem>-<shrinker_type>[:<instance>]-<id> For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair. After this change the shrinker debugfs directory looks like: $ cd /sys/kernel/debug/shrinker/ $ ls dquota-cache-16 sb-devpts-28 sb-proc-47 sb-tmpfs-42 mm-shadow-18 sb-devtmpfs-5 sb-proc-48 sb-tmpfs-43 mm-zspool:zram0-34 sb-hugetlbfs-17 sb-pstore-31 sb-tmpfs-44 rcu-kfree-0 sb-hugetlbfs-33 sb-rootfs-2 sb-tmpfs-49 sb-aio-20 sb-iomem-12 sb-securityfs-6 sb-tracefs-13 sb-anon_inodefs-15 sb-mqueue-21 sb-selinuxfs-22 sb-xfs:vda1-36 sb-bdev-3 sb-nsfs-4 sb-sockfs-8 sb-zsmalloc-19 sb-bpf-32 sb-pipefs-14 sb-sysfs-26 thp-deferred_split-10 sb-btrfs:vda2-24 sb-proc-25 sb-tmpfs-1 thp-zero-9 sb-cgroup2-30 sb-proc-39 sb-tmpfs-27 xfs-buf:vda1-37 sb-configfs-23 sb-proc-41 sb-tmpfs-29 xfs-inodegc:vda1-38 sb-dax-11 sb-proc-45 sb-tmpfs-35 sb-debugfs-7 sb-proc-46 sb-tmpfs-40 [roman.gushchin@linux.dev: fix build warnings] Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle Reported-by: kernel test robot <lkp@intel.com> Link: https://lkml.kernel.org/r/20220601032227.4076670-4-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:24 +08:00
char buf[128];
mm: shrinkers: introduce debugfs interface for memory shrinkers This commit introduces the /sys/kernel/debug/shrinker debugfs interface which provides an ability to observe the state of individual kernel memory shrinkers. Because the feature adds some memory overhead (which shouldn't be large unless there is a huge amount of registered shrinkers), it's guarded by a config option (enabled by default). This commit introduces the "count" interface for each shrinker registered in the system. The output is in the following format: <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... ... To reduce the size of output on machines with many thousands cgroups, if the total number of objects on all nodes is 0, the line is omitted. If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as cgroup inode id. If the shrinker is not numa-aware, 0's are printed for all nodes except the first one. This commit gives debugfs entries simple numeric names, which are not very convenient. The following commit in the series will provide shrinkers with more meaningful names. [akpm@linux-foundation.org: remove WARN_ON_ONCE(), per Roman] Reported-by: syzbot+300d27c79fe6d4cbcc39@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/20220601032227.4076670-3-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:23 +08:00
int id;
Revert "mm: shrinkers: convert shrinker_rwsem to mutex" Patch series "revert shrinker_srcu related changes". This patch (of 7): This reverts commit cf2e309ebca7bb0916771839f9b580b06c778530. Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec test case [1], which is caused by commit f95bdb700bc6 ("mm: vmscan: make global slab shrink lockless"). The root cause is that SRCU has to be careful to not frequently check for SRCU read-side critical section exits. Therefore, even if no one is currently in the SRCU read-side critical section, synchronize_srcu() cannot return quickly. That's why unregister_shrinker() has become slower. After discussion, we will try to use the refcount+RCU method [2] proposed by Dave Chinner to continue to re-implement the lockless slab shrink. So revert the shrinker_mutex back to shrinker_rwsem first. [1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/ [2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/ Link: https://lkml.kernel.org/r/20230609081518.3039120-1-qi.zheng@linux.dev Link: https://lkml.kernel.org/r/20230609081518.3039120-2-qi.zheng@linux.dev Reported-by: kernel test robot <yujie.liu@intel.com> Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yujie Liu <yujie.liu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 16:15:12 +08:00
lockdep_assert_held(&shrinker_rwsem);
mm: shrinkers: introduce debugfs interface for memory shrinkers This commit introduces the /sys/kernel/debug/shrinker debugfs interface which provides an ability to observe the state of individual kernel memory shrinkers. Because the feature adds some memory overhead (which shouldn't be large unless there is a huge amount of registered shrinkers), it's guarded by a config option (enabled by default). This commit introduces the "count" interface for each shrinker registered in the system. The output is in the following format: <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... ... To reduce the size of output on machines with many thousands cgroups, if the total number of objects on all nodes is 0, the line is omitted. If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as cgroup inode id. If the shrinker is not numa-aware, 0's are printed for all nodes except the first one. This commit gives debugfs entries simple numeric names, which are not very convenient. The following commit in the series will provide shrinkers with more meaningful names. [akpm@linux-foundation.org: remove WARN_ON_ONCE(), per Roman] Reported-by: syzbot+300d27c79fe6d4cbcc39@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/20220601032227.4076670-3-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:23 +08:00
/* debugfs isn't initialized yet, add debugfs entries later. */
if (!shrinker_debugfs_root)
return 0;
id = ida_alloc(&shrinker_debugfs_ida, GFP_KERNEL);
if (id < 0)
return id;
shrinker->debugfs_id = id;
mm: shrinkers: provide shrinkers with names Currently shrinkers are anonymous objects. For debugging purposes they can be identified by count/scan function names, but it's not always useful: e.g. for superblock's shrinkers it's nice to have at least an idea of to which superblock the shrinker belongs. This commit adds names to shrinkers. register_shrinker() and prealloc_shrinker() functions are extended to take a format and arguments to master a name. In some cases it's not possible to determine a good name at the time when a shrinker is allocated. For such cases shrinker_debugfs_rename() is provided. The expected format is: <subsystem>-<shrinker_type>[:<instance>]-<id> For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair. After this change the shrinker debugfs directory looks like: $ cd /sys/kernel/debug/shrinker/ $ ls dquota-cache-16 sb-devpts-28 sb-proc-47 sb-tmpfs-42 mm-shadow-18 sb-devtmpfs-5 sb-proc-48 sb-tmpfs-43 mm-zspool:zram0-34 sb-hugetlbfs-17 sb-pstore-31 sb-tmpfs-44 rcu-kfree-0 sb-hugetlbfs-33 sb-rootfs-2 sb-tmpfs-49 sb-aio-20 sb-iomem-12 sb-securityfs-6 sb-tracefs-13 sb-anon_inodefs-15 sb-mqueue-21 sb-selinuxfs-22 sb-xfs:vda1-36 sb-bdev-3 sb-nsfs-4 sb-sockfs-8 sb-zsmalloc-19 sb-bpf-32 sb-pipefs-14 sb-sysfs-26 thp-deferred_split-10 sb-btrfs:vda2-24 sb-proc-25 sb-tmpfs-1 thp-zero-9 sb-cgroup2-30 sb-proc-39 sb-tmpfs-27 xfs-buf:vda1-37 sb-configfs-23 sb-proc-41 sb-tmpfs-29 xfs-inodegc:vda1-38 sb-dax-11 sb-proc-45 sb-tmpfs-35 sb-debugfs-7 sb-proc-46 sb-tmpfs-40 [roman.gushchin@linux.dev: fix build warnings] Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle Reported-by: kernel test robot <lkp@intel.com> Link: https://lkml.kernel.org/r/20220601032227.4076670-4-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:24 +08:00
snprintf(buf, sizeof(buf), "%s-%d", shrinker->name, id);
mm: shrinkers: introduce debugfs interface for memory shrinkers This commit introduces the /sys/kernel/debug/shrinker debugfs interface which provides an ability to observe the state of individual kernel memory shrinkers. Because the feature adds some memory overhead (which shouldn't be large unless there is a huge amount of registered shrinkers), it's guarded by a config option (enabled by default). This commit introduces the "count" interface for each shrinker registered in the system. The output is in the following format: <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... ... To reduce the size of output on machines with many thousands cgroups, if the total number of objects on all nodes is 0, the line is omitted. If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as cgroup inode id. If the shrinker is not numa-aware, 0's are printed for all nodes except the first one. This commit gives debugfs entries simple numeric names, which are not very convenient. The following commit in the series will provide shrinkers with more meaningful names. [akpm@linux-foundation.org: remove WARN_ON_ONCE(), per Roman] Reported-by: syzbot+300d27c79fe6d4cbcc39@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/20220601032227.4076670-3-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:23 +08:00
/* create debugfs entry */
entry = debugfs_create_dir(buf, shrinker_debugfs_root);
if (IS_ERR(entry)) {
ida_free(&shrinker_debugfs_ida, id);
return PTR_ERR(entry);
}
shrinker->debugfs_entry = entry;
debugfs_create_file("count", 0440, entry, shrinker,
mm: shrinkers: introduce debugfs interface for memory shrinkers This commit introduces the /sys/kernel/debug/shrinker debugfs interface which provides an ability to observe the state of individual kernel memory shrinkers. Because the feature adds some memory overhead (which shouldn't be large unless there is a huge amount of registered shrinkers), it's guarded by a config option (enabled by default). This commit introduces the "count" interface for each shrinker registered in the system. The output is in the following format: <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... ... To reduce the size of output on machines with many thousands cgroups, if the total number of objects on all nodes is 0, the line is omitted. If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as cgroup inode id. If the shrinker is not numa-aware, 0's are printed for all nodes except the first one. This commit gives debugfs entries simple numeric names, which are not very convenient. The following commit in the series will provide shrinkers with more meaningful names. [akpm@linux-foundation.org: remove WARN_ON_ONCE(), per Roman] Reported-by: syzbot+300d27c79fe6d4cbcc39@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/20220601032227.4076670-3-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:23 +08:00
&shrinker_debugfs_count_fops);
debugfs_create_file("scan", 0220, entry, shrinker,
&shrinker_debugfs_scan_fops);
mm: shrinkers: introduce debugfs interface for memory shrinkers This commit introduces the /sys/kernel/debug/shrinker debugfs interface which provides an ability to observe the state of individual kernel memory shrinkers. Because the feature adds some memory overhead (which shouldn't be large unless there is a huge amount of registered shrinkers), it's guarded by a config option (enabled by default). This commit introduces the "count" interface for each shrinker registered in the system. The output is in the following format: <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... ... To reduce the size of output on machines with many thousands cgroups, if the total number of objects on all nodes is 0, the line is omitted. If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as cgroup inode id. If the shrinker is not numa-aware, 0's are printed for all nodes except the first one. This commit gives debugfs entries simple numeric names, which are not very convenient. The following commit in the series will provide shrinkers with more meaningful names. [akpm@linux-foundation.org: remove WARN_ON_ONCE(), per Roman] Reported-by: syzbot+300d27c79fe6d4cbcc39@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/20220601032227.4076670-3-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:23 +08:00
return 0;
}
mm: shrinkers: provide shrinkers with names Currently shrinkers are anonymous objects. For debugging purposes they can be identified by count/scan function names, but it's not always useful: e.g. for superblock's shrinkers it's nice to have at least an idea of to which superblock the shrinker belongs. This commit adds names to shrinkers. register_shrinker() and prealloc_shrinker() functions are extended to take a format and arguments to master a name. In some cases it's not possible to determine a good name at the time when a shrinker is allocated. For such cases shrinker_debugfs_rename() is provided. The expected format is: <subsystem>-<shrinker_type>[:<instance>]-<id> For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair. After this change the shrinker debugfs directory looks like: $ cd /sys/kernel/debug/shrinker/ $ ls dquota-cache-16 sb-devpts-28 sb-proc-47 sb-tmpfs-42 mm-shadow-18 sb-devtmpfs-5 sb-proc-48 sb-tmpfs-43 mm-zspool:zram0-34 sb-hugetlbfs-17 sb-pstore-31 sb-tmpfs-44 rcu-kfree-0 sb-hugetlbfs-33 sb-rootfs-2 sb-tmpfs-49 sb-aio-20 sb-iomem-12 sb-securityfs-6 sb-tracefs-13 sb-anon_inodefs-15 sb-mqueue-21 sb-selinuxfs-22 sb-xfs:vda1-36 sb-bdev-3 sb-nsfs-4 sb-sockfs-8 sb-zsmalloc-19 sb-bpf-32 sb-pipefs-14 sb-sysfs-26 thp-deferred_split-10 sb-btrfs:vda2-24 sb-proc-25 sb-tmpfs-1 thp-zero-9 sb-cgroup2-30 sb-proc-39 sb-tmpfs-27 xfs-buf:vda1-37 sb-configfs-23 sb-proc-41 sb-tmpfs-29 xfs-inodegc:vda1-38 sb-dax-11 sb-proc-45 sb-tmpfs-35 sb-debugfs-7 sb-proc-46 sb-tmpfs-40 [roman.gushchin@linux.dev: fix build warnings] Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle Reported-by: kernel test robot <lkp@intel.com> Link: https://lkml.kernel.org/r/20220601032227.4076670-4-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:24 +08:00
int shrinker_debugfs_rename(struct shrinker *shrinker, const char *fmt, ...)
{
struct dentry *entry;
char buf[128];
const char *new, *old;
va_list ap;
int ret = 0;
va_start(ap, fmt);
new = kvasprintf_const(GFP_KERNEL, fmt, ap);
va_end(ap);
if (!new)
return -ENOMEM;
Revert "mm: shrinkers: convert shrinker_rwsem to mutex" Patch series "revert shrinker_srcu related changes". This patch (of 7): This reverts commit cf2e309ebca7bb0916771839f9b580b06c778530. Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec test case [1], which is caused by commit f95bdb700bc6 ("mm: vmscan: make global slab shrink lockless"). The root cause is that SRCU has to be careful to not frequently check for SRCU read-side critical section exits. Therefore, even if no one is currently in the SRCU read-side critical section, synchronize_srcu() cannot return quickly. That's why unregister_shrinker() has become slower. After discussion, we will try to use the refcount+RCU method [2] proposed by Dave Chinner to continue to re-implement the lockless slab shrink. So revert the shrinker_mutex back to shrinker_rwsem first. [1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/ [2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/ Link: https://lkml.kernel.org/r/20230609081518.3039120-1-qi.zheng@linux.dev Link: https://lkml.kernel.org/r/20230609081518.3039120-2-qi.zheng@linux.dev Reported-by: kernel test robot <yujie.liu@intel.com> Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yujie Liu <yujie.liu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 16:15:12 +08:00
down_write(&shrinker_rwsem);
mm: shrinkers: provide shrinkers with names Currently shrinkers are anonymous objects. For debugging purposes they can be identified by count/scan function names, but it's not always useful: e.g. for superblock's shrinkers it's nice to have at least an idea of to which superblock the shrinker belongs. This commit adds names to shrinkers. register_shrinker() and prealloc_shrinker() functions are extended to take a format and arguments to master a name. In some cases it's not possible to determine a good name at the time when a shrinker is allocated. For such cases shrinker_debugfs_rename() is provided. The expected format is: <subsystem>-<shrinker_type>[:<instance>]-<id> For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair. After this change the shrinker debugfs directory looks like: $ cd /sys/kernel/debug/shrinker/ $ ls dquota-cache-16 sb-devpts-28 sb-proc-47 sb-tmpfs-42 mm-shadow-18 sb-devtmpfs-5 sb-proc-48 sb-tmpfs-43 mm-zspool:zram0-34 sb-hugetlbfs-17 sb-pstore-31 sb-tmpfs-44 rcu-kfree-0 sb-hugetlbfs-33 sb-rootfs-2 sb-tmpfs-49 sb-aio-20 sb-iomem-12 sb-securityfs-6 sb-tracefs-13 sb-anon_inodefs-15 sb-mqueue-21 sb-selinuxfs-22 sb-xfs:vda1-36 sb-bdev-3 sb-nsfs-4 sb-sockfs-8 sb-zsmalloc-19 sb-bpf-32 sb-pipefs-14 sb-sysfs-26 thp-deferred_split-10 sb-btrfs:vda2-24 sb-proc-25 sb-tmpfs-1 thp-zero-9 sb-cgroup2-30 sb-proc-39 sb-tmpfs-27 xfs-buf:vda1-37 sb-configfs-23 sb-proc-41 sb-tmpfs-29 xfs-inodegc:vda1-38 sb-dax-11 sb-proc-45 sb-tmpfs-35 sb-debugfs-7 sb-proc-46 sb-tmpfs-40 [roman.gushchin@linux.dev: fix build warnings] Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle Reported-by: kernel test robot <lkp@intel.com> Link: https://lkml.kernel.org/r/20220601032227.4076670-4-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:24 +08:00
old = shrinker->name;
shrinker->name = new;
if (shrinker->debugfs_entry) {
snprintf(buf, sizeof(buf), "%s-%d", shrinker->name,
shrinker->debugfs_id);
entry = debugfs_rename(shrinker_debugfs_root,
shrinker->debugfs_entry,
shrinker_debugfs_root, buf);
if (IS_ERR(entry))
ret = PTR_ERR(entry);
else
shrinker->debugfs_entry = entry;
}
Revert "mm: shrinkers: convert shrinker_rwsem to mutex" Patch series "revert shrinker_srcu related changes". This patch (of 7): This reverts commit cf2e309ebca7bb0916771839f9b580b06c778530. Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec test case [1], which is caused by commit f95bdb700bc6 ("mm: vmscan: make global slab shrink lockless"). The root cause is that SRCU has to be careful to not frequently check for SRCU read-side critical section exits. Therefore, even if no one is currently in the SRCU read-side critical section, synchronize_srcu() cannot return quickly. That's why unregister_shrinker() has become slower. After discussion, we will try to use the refcount+RCU method [2] proposed by Dave Chinner to continue to re-implement the lockless slab shrink. So revert the shrinker_mutex back to shrinker_rwsem first. [1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/ [2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/ Link: https://lkml.kernel.org/r/20230609081518.3039120-1-qi.zheng@linux.dev Link: https://lkml.kernel.org/r/20230609081518.3039120-2-qi.zheng@linux.dev Reported-by: kernel test robot <yujie.liu@intel.com> Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yujie Liu <yujie.liu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 16:15:12 +08:00
up_write(&shrinker_rwsem);
mm: shrinkers: provide shrinkers with names Currently shrinkers are anonymous objects. For debugging purposes they can be identified by count/scan function names, but it's not always useful: e.g. for superblock's shrinkers it's nice to have at least an idea of to which superblock the shrinker belongs. This commit adds names to shrinkers. register_shrinker() and prealloc_shrinker() functions are extended to take a format and arguments to master a name. In some cases it's not possible to determine a good name at the time when a shrinker is allocated. For such cases shrinker_debugfs_rename() is provided. The expected format is: <subsystem>-<shrinker_type>[:<instance>]-<id> For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair. After this change the shrinker debugfs directory looks like: $ cd /sys/kernel/debug/shrinker/ $ ls dquota-cache-16 sb-devpts-28 sb-proc-47 sb-tmpfs-42 mm-shadow-18 sb-devtmpfs-5 sb-proc-48 sb-tmpfs-43 mm-zspool:zram0-34 sb-hugetlbfs-17 sb-pstore-31 sb-tmpfs-44 rcu-kfree-0 sb-hugetlbfs-33 sb-rootfs-2 sb-tmpfs-49 sb-aio-20 sb-iomem-12 sb-securityfs-6 sb-tracefs-13 sb-anon_inodefs-15 sb-mqueue-21 sb-selinuxfs-22 sb-xfs:vda1-36 sb-bdev-3 sb-nsfs-4 sb-sockfs-8 sb-zsmalloc-19 sb-bpf-32 sb-pipefs-14 sb-sysfs-26 thp-deferred_split-10 sb-btrfs:vda2-24 sb-proc-25 sb-tmpfs-1 thp-zero-9 sb-cgroup2-30 sb-proc-39 sb-tmpfs-27 xfs-buf:vda1-37 sb-configfs-23 sb-proc-41 sb-tmpfs-29 xfs-inodegc:vda1-38 sb-dax-11 sb-proc-45 sb-tmpfs-35 sb-debugfs-7 sb-proc-46 sb-tmpfs-40 [roman.gushchin@linux.dev: fix build warnings] Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle Reported-by: kernel test robot <lkp@intel.com> Link: https://lkml.kernel.org/r/20220601032227.4076670-4-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:24 +08:00
kfree_const(old);
return ret;
}
EXPORT_SYMBOL(shrinker_debugfs_rename);
mm: shrinkers: fix race condition on debugfs cleanup When something registers and unregisters many shrinkers, such as: for x in $(seq 10000); do unshare -Ui true; done Sometimes the following error is printed to the kernel log: debugfs: Directory '...' with parent 'shrinker' already present! This occurs since commit badc28d4924b ("mm: shrinkers: fix deadlock in shrinker debugfs") / v6.2: Since the call to `debugfs_remove_recursive` was moved outside the `shrinker_rwsem`/`shrinker_mutex` lock, but the call to `ida_free` stayed inside, a newly registered shrinker can be re-assigned that ID and attempt to create the debugfs directory before the directory from the previous shrinker has been removed. The locking changes in commit f95bdb700bc6 ("mm: vmscan: make global slab shrink lockless") made the race condition more likely, though it existed before then. Commit badc28d4924b ("mm: shrinkers: fix deadlock in shrinker debugfs") could be reverted since the issue is addressed should no longer occur since the count and scan operations are lockless since commit 20cd1892fcc3 ("mm: shrinkers: make count and scan in shrinker debugfs lockless"). However, since this is a contended lock, prefer instead moving `ida_free` outside the lock to avoid the race. Link: https://lkml.kernel.org/r/20230503013232.299211-1-joanbrugueram@gmail.com Fixes: badc28d4924b ("mm: shrinkers: fix deadlock in shrinker debugfs") Signed-off-by: Joan Bruguera Micó <joanbrugueram@gmail.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-03 09:32:32 +08:00
struct dentry *shrinker_debugfs_detach(struct shrinker *shrinker,
int *debugfs_id)
mm: shrinkers: introduce debugfs interface for memory shrinkers This commit introduces the /sys/kernel/debug/shrinker debugfs interface which provides an ability to observe the state of individual kernel memory shrinkers. Because the feature adds some memory overhead (which shouldn't be large unless there is a huge amount of registered shrinkers), it's guarded by a config option (enabled by default). This commit introduces the "count" interface for each shrinker registered in the system. The output is in the following format: <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... ... To reduce the size of output on machines with many thousands cgroups, if the total number of objects on all nodes is 0, the line is omitted. If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as cgroup inode id. If the shrinker is not numa-aware, 0's are printed for all nodes except the first one. This commit gives debugfs entries simple numeric names, which are not very convenient. The following commit in the series will provide shrinkers with more meaningful names. [akpm@linux-foundation.org: remove WARN_ON_ONCE(), per Roman] Reported-by: syzbot+300d27c79fe6d4cbcc39@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/20220601032227.4076670-3-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:23 +08:00
{
struct dentry *entry = shrinker->debugfs_entry;
Revert "mm: shrinkers: convert shrinker_rwsem to mutex" Patch series "revert shrinker_srcu related changes". This patch (of 7): This reverts commit cf2e309ebca7bb0916771839f9b580b06c778530. Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec test case [1], which is caused by commit f95bdb700bc6 ("mm: vmscan: make global slab shrink lockless"). The root cause is that SRCU has to be careful to not frequently check for SRCU read-side critical section exits. Therefore, even if no one is currently in the SRCU read-side critical section, synchronize_srcu() cannot return quickly. That's why unregister_shrinker() has become slower. After discussion, we will try to use the refcount+RCU method [2] proposed by Dave Chinner to continue to re-implement the lockless slab shrink. So revert the shrinker_mutex back to shrinker_rwsem first. [1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/ [2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/ Link: https://lkml.kernel.org/r/20230609081518.3039120-1-qi.zheng@linux.dev Link: https://lkml.kernel.org/r/20230609081518.3039120-2-qi.zheng@linux.dev Reported-by: kernel test robot <yujie.liu@intel.com> Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yujie Liu <yujie.liu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 16:15:12 +08:00
lockdep_assert_held(&shrinker_rwsem);
mm: shrinkers: introduce debugfs interface for memory shrinkers This commit introduces the /sys/kernel/debug/shrinker debugfs interface which provides an ability to observe the state of individual kernel memory shrinkers. Because the feature adds some memory overhead (which shouldn't be large unless there is a huge amount of registered shrinkers), it's guarded by a config option (enabled by default). This commit introduces the "count" interface for each shrinker registered in the system. The output is in the following format: <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... ... To reduce the size of output on machines with many thousands cgroups, if the total number of objects on all nodes is 0, the line is omitted. If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as cgroup inode id. If the shrinker is not numa-aware, 0's are printed for all nodes except the first one. This commit gives debugfs entries simple numeric names, which are not very convenient. The following commit in the series will provide shrinkers with more meaningful names. [akpm@linux-foundation.org: remove WARN_ON_ONCE(), per Roman] Reported-by: syzbot+300d27c79fe6d4cbcc39@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/20220601032227.4076670-3-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:23 +08:00
mm: shrinkers: provide shrinkers with names Currently shrinkers are anonymous objects. For debugging purposes they can be identified by count/scan function names, but it's not always useful: e.g. for superblock's shrinkers it's nice to have at least an idea of to which superblock the shrinker belongs. This commit adds names to shrinkers. register_shrinker() and prealloc_shrinker() functions are extended to take a format and arguments to master a name. In some cases it's not possible to determine a good name at the time when a shrinker is allocated. For such cases shrinker_debugfs_rename() is provided. The expected format is: <subsystem>-<shrinker_type>[:<instance>]-<id> For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair. After this change the shrinker debugfs directory looks like: $ cd /sys/kernel/debug/shrinker/ $ ls dquota-cache-16 sb-devpts-28 sb-proc-47 sb-tmpfs-42 mm-shadow-18 sb-devtmpfs-5 sb-proc-48 sb-tmpfs-43 mm-zspool:zram0-34 sb-hugetlbfs-17 sb-pstore-31 sb-tmpfs-44 rcu-kfree-0 sb-hugetlbfs-33 sb-rootfs-2 sb-tmpfs-49 sb-aio-20 sb-iomem-12 sb-securityfs-6 sb-tracefs-13 sb-anon_inodefs-15 sb-mqueue-21 sb-selinuxfs-22 sb-xfs:vda1-36 sb-bdev-3 sb-nsfs-4 sb-sockfs-8 sb-zsmalloc-19 sb-bpf-32 sb-pipefs-14 sb-sysfs-26 thp-deferred_split-10 sb-btrfs:vda2-24 sb-proc-25 sb-tmpfs-1 thp-zero-9 sb-cgroup2-30 sb-proc-39 sb-tmpfs-27 xfs-buf:vda1-37 sb-configfs-23 sb-proc-41 sb-tmpfs-29 xfs-inodegc:vda1-38 sb-dax-11 sb-proc-45 sb-tmpfs-35 sb-debugfs-7 sb-proc-46 sb-tmpfs-40 [roman.gushchin@linux.dev: fix build warnings] Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle Reported-by: kernel test robot <lkp@intel.com> Link: https://lkml.kernel.org/r/20220601032227.4076670-4-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:24 +08:00
kfree_const(shrinker->name);
shrinker->name = NULL;
mm: shrinkers: provide shrinkers with names Currently shrinkers are anonymous objects. For debugging purposes they can be identified by count/scan function names, but it's not always useful: e.g. for superblock's shrinkers it's nice to have at least an idea of to which superblock the shrinker belongs. This commit adds names to shrinkers. register_shrinker() and prealloc_shrinker() functions are extended to take a format and arguments to master a name. In some cases it's not possible to determine a good name at the time when a shrinker is allocated. For such cases shrinker_debugfs_rename() is provided. The expected format is: <subsystem>-<shrinker_type>[:<instance>]-<id> For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair. After this change the shrinker debugfs directory looks like: $ cd /sys/kernel/debug/shrinker/ $ ls dquota-cache-16 sb-devpts-28 sb-proc-47 sb-tmpfs-42 mm-shadow-18 sb-devtmpfs-5 sb-proc-48 sb-tmpfs-43 mm-zspool:zram0-34 sb-hugetlbfs-17 sb-pstore-31 sb-tmpfs-44 rcu-kfree-0 sb-hugetlbfs-33 sb-rootfs-2 sb-tmpfs-49 sb-aio-20 sb-iomem-12 sb-securityfs-6 sb-tracefs-13 sb-anon_inodefs-15 sb-mqueue-21 sb-selinuxfs-22 sb-xfs:vda1-36 sb-bdev-3 sb-nsfs-4 sb-sockfs-8 sb-zsmalloc-19 sb-bpf-32 sb-pipefs-14 sb-sysfs-26 thp-deferred_split-10 sb-btrfs:vda2-24 sb-proc-25 sb-tmpfs-1 thp-zero-9 sb-cgroup2-30 sb-proc-39 sb-tmpfs-27 xfs-buf:vda1-37 sb-configfs-23 sb-proc-41 sb-tmpfs-29 xfs-inodegc:vda1-38 sb-dax-11 sb-proc-45 sb-tmpfs-35 sb-debugfs-7 sb-proc-46 sb-tmpfs-40 [roman.gushchin@linux.dev: fix build warnings] Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle Reported-by: kernel test robot <lkp@intel.com> Link: https://lkml.kernel.org/r/20220601032227.4076670-4-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:24 +08:00
mm: shrinkers: fix race condition on debugfs cleanup When something registers and unregisters many shrinkers, such as: for x in $(seq 10000); do unshare -Ui true; done Sometimes the following error is printed to the kernel log: debugfs: Directory '...' with parent 'shrinker' already present! This occurs since commit badc28d4924b ("mm: shrinkers: fix deadlock in shrinker debugfs") / v6.2: Since the call to `debugfs_remove_recursive` was moved outside the `shrinker_rwsem`/`shrinker_mutex` lock, but the call to `ida_free` stayed inside, a newly registered shrinker can be re-assigned that ID and attempt to create the debugfs directory before the directory from the previous shrinker has been removed. The locking changes in commit f95bdb700bc6 ("mm: vmscan: make global slab shrink lockless") made the race condition more likely, though it existed before then. Commit badc28d4924b ("mm: shrinkers: fix deadlock in shrinker debugfs") could be reverted since the issue is addressed should no longer occur since the count and scan operations are lockless since commit 20cd1892fcc3 ("mm: shrinkers: make count and scan in shrinker debugfs lockless"). However, since this is a contended lock, prefer instead moving `ida_free` outside the lock to avoid the race. Link: https://lkml.kernel.org/r/20230503013232.299211-1-joanbrugueram@gmail.com Fixes: badc28d4924b ("mm: shrinkers: fix deadlock in shrinker debugfs") Signed-off-by: Joan Bruguera Micó <joanbrugueram@gmail.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-03 09:32:32 +08:00
*debugfs_id = entry ? shrinker->debugfs_id : -1;
shrinker->debugfs_entry = NULL;
mm: shrinkers: introduce debugfs interface for memory shrinkers This commit introduces the /sys/kernel/debug/shrinker debugfs interface which provides an ability to observe the state of individual kernel memory shrinkers. Because the feature adds some memory overhead (which shouldn't be large unless there is a huge amount of registered shrinkers), it's guarded by a config option (enabled by default). This commit introduces the "count" interface for each shrinker registered in the system. The output is in the following format: <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... ... To reduce the size of output on machines with many thousands cgroups, if the total number of objects on all nodes is 0, the line is omitted. If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as cgroup inode id. If the shrinker is not numa-aware, 0's are printed for all nodes except the first one. This commit gives debugfs entries simple numeric names, which are not very convenient. The following commit in the series will provide shrinkers with more meaningful names. [akpm@linux-foundation.org: remove WARN_ON_ONCE(), per Roman] Reported-by: syzbot+300d27c79fe6d4cbcc39@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/20220601032227.4076670-3-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:23 +08:00
return entry;
mm: shrinkers: introduce debugfs interface for memory shrinkers This commit introduces the /sys/kernel/debug/shrinker debugfs interface which provides an ability to observe the state of individual kernel memory shrinkers. Because the feature adds some memory overhead (which shouldn't be large unless there is a huge amount of registered shrinkers), it's guarded by a config option (enabled by default). This commit introduces the "count" interface for each shrinker registered in the system. The output is in the following format: <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... ... To reduce the size of output on machines with many thousands cgroups, if the total number of objects on all nodes is 0, the line is omitted. If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as cgroup inode id. If the shrinker is not numa-aware, 0's are printed for all nodes except the first one. This commit gives debugfs entries simple numeric names, which are not very convenient. The following commit in the series will provide shrinkers with more meaningful names. [akpm@linux-foundation.org: remove WARN_ON_ONCE(), per Roman] Reported-by: syzbot+300d27c79fe6d4cbcc39@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/20220601032227.4076670-3-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:23 +08:00
}
mm: shrinkers: fix race condition on debugfs cleanup When something registers and unregisters many shrinkers, such as: for x in $(seq 10000); do unshare -Ui true; done Sometimes the following error is printed to the kernel log: debugfs: Directory '...' with parent 'shrinker' already present! This occurs since commit badc28d4924b ("mm: shrinkers: fix deadlock in shrinker debugfs") / v6.2: Since the call to `debugfs_remove_recursive` was moved outside the `shrinker_rwsem`/`shrinker_mutex` lock, but the call to `ida_free` stayed inside, a newly registered shrinker can be re-assigned that ID and attempt to create the debugfs directory before the directory from the previous shrinker has been removed. The locking changes in commit f95bdb700bc6 ("mm: vmscan: make global slab shrink lockless") made the race condition more likely, though it existed before then. Commit badc28d4924b ("mm: shrinkers: fix deadlock in shrinker debugfs") could be reverted since the issue is addressed should no longer occur since the count and scan operations are lockless since commit 20cd1892fcc3 ("mm: shrinkers: make count and scan in shrinker debugfs lockless"). However, since this is a contended lock, prefer instead moving `ida_free` outside the lock to avoid the race. Link: https://lkml.kernel.org/r/20230503013232.299211-1-joanbrugueram@gmail.com Fixes: badc28d4924b ("mm: shrinkers: fix deadlock in shrinker debugfs") Signed-off-by: Joan Bruguera Micó <joanbrugueram@gmail.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-03 09:32:32 +08:00
void shrinker_debugfs_remove(struct dentry *debugfs_entry, int debugfs_id)
{
debugfs_remove_recursive(debugfs_entry);
ida_free(&shrinker_debugfs_ida, debugfs_id);
}
mm: shrinkers: introduce debugfs interface for memory shrinkers This commit introduces the /sys/kernel/debug/shrinker debugfs interface which provides an ability to observe the state of individual kernel memory shrinkers. Because the feature adds some memory overhead (which shouldn't be large unless there is a huge amount of registered shrinkers), it's guarded by a config option (enabled by default). This commit introduces the "count" interface for each shrinker registered in the system. The output is in the following format: <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... ... To reduce the size of output on machines with many thousands cgroups, if the total number of objects on all nodes is 0, the line is omitted. If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as cgroup inode id. If the shrinker is not numa-aware, 0's are printed for all nodes except the first one. This commit gives debugfs entries simple numeric names, which are not very convenient. The following commit in the series will provide shrinkers with more meaningful names. [akpm@linux-foundation.org: remove WARN_ON_ONCE(), per Roman] Reported-by: syzbot+300d27c79fe6d4cbcc39@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/20220601032227.4076670-3-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:23 +08:00
static int __init shrinker_debugfs_init(void)
{
struct shrinker *shrinker;
struct dentry *dentry;
int ret = 0;
dentry = debugfs_create_dir("shrinker", NULL);
if (IS_ERR(dentry))
return PTR_ERR(dentry);
shrinker_debugfs_root = dentry;
/* Create debugfs entries for shrinkers registered at boot */
Revert "mm: shrinkers: convert shrinker_rwsem to mutex" Patch series "revert shrinker_srcu related changes". This patch (of 7): This reverts commit cf2e309ebca7bb0916771839f9b580b06c778530. Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec test case [1], which is caused by commit f95bdb700bc6 ("mm: vmscan: make global slab shrink lockless"). The root cause is that SRCU has to be careful to not frequently check for SRCU read-side critical section exits. Therefore, even if no one is currently in the SRCU read-side critical section, synchronize_srcu() cannot return quickly. That's why unregister_shrinker() has become slower. After discussion, we will try to use the refcount+RCU method [2] proposed by Dave Chinner to continue to re-implement the lockless slab shrink. So revert the shrinker_mutex back to shrinker_rwsem first. [1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/ [2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/ Link: https://lkml.kernel.org/r/20230609081518.3039120-1-qi.zheng@linux.dev Link: https://lkml.kernel.org/r/20230609081518.3039120-2-qi.zheng@linux.dev Reported-by: kernel test robot <yujie.liu@intel.com> Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yujie Liu <yujie.liu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 16:15:12 +08:00
down_write(&shrinker_rwsem);
mm: shrinkers: introduce debugfs interface for memory shrinkers This commit introduces the /sys/kernel/debug/shrinker debugfs interface which provides an ability to observe the state of individual kernel memory shrinkers. Because the feature adds some memory overhead (which shouldn't be large unless there is a huge amount of registered shrinkers), it's guarded by a config option (enabled by default). This commit introduces the "count" interface for each shrinker registered in the system. The output is in the following format: <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... ... To reduce the size of output on machines with many thousands cgroups, if the total number of objects on all nodes is 0, the line is omitted. If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as cgroup inode id. If the shrinker is not numa-aware, 0's are printed for all nodes except the first one. This commit gives debugfs entries simple numeric names, which are not very convenient. The following commit in the series will provide shrinkers with more meaningful names. [akpm@linux-foundation.org: remove WARN_ON_ONCE(), per Roman] Reported-by: syzbot+300d27c79fe6d4cbcc39@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/20220601032227.4076670-3-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:23 +08:00
list_for_each_entry(shrinker, &shrinker_list, list)
if (!shrinker->debugfs_entry) {
ret = shrinker_debugfs_add(shrinker);
if (ret)
break;
}
Revert "mm: shrinkers: convert shrinker_rwsem to mutex" Patch series "revert shrinker_srcu related changes". This patch (of 7): This reverts commit cf2e309ebca7bb0916771839f9b580b06c778530. Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec test case [1], which is caused by commit f95bdb700bc6 ("mm: vmscan: make global slab shrink lockless"). The root cause is that SRCU has to be careful to not frequently check for SRCU read-side critical section exits. Therefore, even if no one is currently in the SRCU read-side critical section, synchronize_srcu() cannot return quickly. That's why unregister_shrinker() has become slower. After discussion, we will try to use the refcount+RCU method [2] proposed by Dave Chinner to continue to re-implement the lockless slab shrink. So revert the shrinker_mutex back to shrinker_rwsem first. [1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/ [2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/ Link: https://lkml.kernel.org/r/20230609081518.3039120-1-qi.zheng@linux.dev Link: https://lkml.kernel.org/r/20230609081518.3039120-2-qi.zheng@linux.dev Reported-by: kernel test robot <yujie.liu@intel.com> Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yujie Liu <yujie.liu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 16:15:12 +08:00
up_write(&shrinker_rwsem);
mm: shrinkers: introduce debugfs interface for memory shrinkers This commit introduces the /sys/kernel/debug/shrinker debugfs interface which provides an ability to observe the state of individual kernel memory shrinkers. Because the feature adds some memory overhead (which shouldn't be large unless there is a huge amount of registered shrinkers), it's guarded by a config option (enabled by default). This commit introduces the "count" interface for each shrinker registered in the system. The output is in the following format: <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>... ... To reduce the size of output on machines with many thousands cgroups, if the total number of objects on all nodes is 0, the line is omitted. If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as cgroup inode id. If the shrinker is not numa-aware, 0's are printed for all nodes except the first one. This commit gives debugfs entries simple numeric names, which are not very convenient. The following commit in the series will provide shrinkers with more meaningful names. [akpm@linux-foundation.org: remove WARN_ON_ONCE(), per Roman] Reported-by: syzbot+300d27c79fe6d4cbcc39@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/20220601032227.4076670-3-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 11:22:23 +08:00
return ret;
}
late_initcall(shrinker_debugfs_init);