OpenCloudOS-Kernel/drivers/usb/host/xhci-plat.c

291 lines
7.1 KiB
C
Raw Normal View History

/*
* xhci-plat.c - xHCI host controller driver platform Bus Glue.
*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
* Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
*
* A lot of code borrowed from the Linux xHCI driver.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/usb/phy.h>
#include <linux/slab.h>
#include <linux/usb/xhci_pdriver.h>
#include "xhci.h"
#include "xhci-mvebu.h"
#include "xhci-rcar.h"
static struct hc_driver __read_mostly xhci_plat_hc_driver;
static int xhci_plat_setup(struct usb_hcd *hcd);
static int xhci_plat_start(struct usb_hcd *hcd);
static const struct xhci_driver_overrides xhci_plat_overrides __initconst = {
.extra_priv_size = sizeof(struct xhci_hcd),
.reset = xhci_plat_setup,
.start = xhci_plat_start,
};
static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
{
/*
* As of now platform drivers don't provide MSI support so we ensure
* here that the generic code does not try to make a pci_dev from our
* dev struct in order to setup MSI
*/
xhci->quirks |= XHCI_PLAT;
}
/* called during probe() after chip reset completes */
static int xhci_plat_setup(struct usb_hcd *hcd)
{
struct device_node *of_node = hcd->self.controller->of_node;
int ret;
if (of_device_is_compatible(of_node, "renesas,xhci-r8a7790") ||
of_device_is_compatible(of_node, "renesas,xhci-r8a7791")) {
ret = xhci_rcar_init_quirk(hcd);
if (ret)
return ret;
}
return xhci_gen_setup(hcd, xhci_plat_quirks);
}
static int xhci_plat_start(struct usb_hcd *hcd)
{
struct device_node *of_node = hcd->self.controller->of_node;
if (of_device_is_compatible(of_node, "renesas,xhci-r8a7790") ||
of_device_is_compatible(of_node, "renesas,xhci-r8a7791"))
xhci_rcar_start(hcd);
return xhci_run(hcd);
}
static int xhci_plat_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
struct usb_xhci_pdata *pdata = dev_get_platdata(&pdev->dev);
const struct hc_driver *driver;
struct xhci_hcd *xhci;
struct resource *res;
struct usb_hcd *hcd;
struct clk *clk;
int ret;
int irq;
if (usb_disabled())
return -ENODEV;
driver = &xhci_plat_hc_driver;
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return -ENODEV;
xhci: fix dma mask setup in xhci.c The function dma_set_mask() tests internally whether the dma_mask pointer for the device is initialized and fails if the dma_mask pointer is NULL. On pci platforms, the device dma_mask pointer is initialized, when pci devices are enumerated, to point to the pci_dev->dma_mask which is 0xffffffff. However, for non-pci platforms, the dma_mask pointer may not be initialized and in that case dma_set_mask() will fail. This patch initializes the dma_mask and the coherent_dma_mask to 32bits in xhci_plat_probe(), before the call to usb_create_hcd() that sets the "uses_dma" flag for the usb bus and the call to usb_add_hcd() that creates coherent dma pools for the usb hcd. Moreover, a call to dma_set_mask() does not set the device coherent_dma_mask. Since the xhci-hcd driver calls dma_alloc_coherent() and dma_pool_alloc() to allocate consistent DMA memory blocks, the coherent DMA address mask has to be set explicitly. This patch sets the coherent_dma_mask to 64bits in xhci_gen_setup() when the xHC is capable for 64-bit DMA addressing. If dma_set_mask() succeeds, for a given bitmask, it is guaranteed that the given bitmask is also supported for consistent DMA mappings. Other changes introduced in this patch are: - The return value of dma_set_mask() is checked to ensure that the required dma bitmask conforms with the host system's addressing capabilities. - The dma_mask setup code for the non-primary hcd was removed since both primary and non-primary hcd refer to the same generic device whose dma_mask and coherent_dma_mask are already set during the setup of the primary hcd. - The code for reading the HCCPARAMS register to find out the addressing capabilities of xHC was removed since its value is already cached in xhci->hccparams. - hcd->self.controller was replaced with the dev variable since it is already available. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-08-14 10:55:19 +08:00
/* Initialize dma_mask and coherent_dma_mask to 32-bits */
ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (ret)
return ret;
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
else
dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hcd->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(hcd->regs)) {
ret = PTR_ERR(hcd->regs);
goto put_hcd;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
/*
* Not all platforms have a clk so it is not an error if the
* clock does not exists.
*/
clk = devm_clk_get(&pdev->dev, NULL);
if (!IS_ERR(clk)) {
ret = clk_prepare_enable(clk);
if (ret)
goto put_hcd;
}
if (of_device_is_compatible(pdev->dev.of_node,
"marvell,armada-375-xhci") ||
of_device_is_compatible(pdev->dev.of_node,
"marvell,armada-380-xhci")) {
ret = xhci_mvebu_mbus_init_quirk(pdev);
if (ret)
goto disable_clk;
}
device_wakeup_enable(hcd->self.controller);
xhci = hcd_to_xhci(hcd);
xhci->clk = clk;
xhci->main_hcd = hcd;
xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev,
dev_name(&pdev->dev), hcd);
if (!xhci->shared_hcd) {
ret = -ENOMEM;
goto disable_clk;
}
if ((node && of_property_read_bool(node, "usb3-lpm-capable")) ||
(pdata && pdata->usb3_lpm_capable))
xhci->quirks |= XHCI_LPM_SUPPORT;
if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
xhci->shared_hcd->can_do_streams = 1;
hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
if (IS_ERR(hcd->usb_phy)) {
ret = PTR_ERR(hcd->usb_phy);
if (ret == -EPROBE_DEFER)
goto put_usb3_hcd;
hcd->usb_phy = NULL;
} else {
ret = usb_phy_init(hcd->usb_phy);
if (ret)
goto put_usb3_hcd;
}
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret)
goto disable_usb_phy;
ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
if (ret)
goto dealloc_usb2_hcd;
return 0;
dealloc_usb2_hcd:
usb_remove_hcd(hcd);
disable_usb_phy:
usb_phy_shutdown(hcd->usb_phy);
put_usb3_hcd:
usb_put_hcd(xhci->shared_hcd);
disable_clk:
if (!IS_ERR(clk))
clk_disable_unprepare(clk);
put_hcd:
usb_put_hcd(hcd);
return ret;
}
static int xhci_plat_remove(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct clk *clk = xhci->clk;
usb_remove_hcd(xhci->shared_hcd);
usb_phy_shutdown(hcd->usb_phy);
usb_remove_hcd(hcd);
usb_put_hcd(xhci->shared_hcd);
if (!IS_ERR(clk))
clk_disable_unprepare(clk);
usb_put_hcd(hcd);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int xhci_plat_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
/*
* xhci_suspend() needs `do_wakeup` to know whether host is allowed
* to do wakeup during suspend. Since xhci_plat_suspend is currently
* only designed for system suspend, device_may_wakeup() is enough
* to dertermine whether host is allowed to do wakeup. Need to
* reconsider this when xhci_plat_suspend enlarges its scope, e.g.,
* also applies to runtime suspend.
*/
return xhci_suspend(xhci, device_may_wakeup(dev));
}
static int xhci_plat_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
return xhci_resume(xhci, 0);
}
static const struct dev_pm_ops xhci_plat_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
};
#define DEV_PM_OPS (&xhci_plat_pm_ops)
#else
#define DEV_PM_OPS NULL
#endif /* CONFIG_PM */
#ifdef CONFIG_OF
static const struct of_device_id usb_xhci_of_match[] = {
{ .compatible = "generic-xhci" },
{ .compatible = "xhci-platform" },
{ .compatible = "marvell,armada-375-xhci"},
{ .compatible = "marvell,armada-380-xhci"},
{ .compatible = "renesas,xhci-r8a7790"},
{ .compatible = "renesas,xhci-r8a7791"},
{ },
};
MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
#endif
static struct platform_driver usb_xhci_driver = {
.probe = xhci_plat_probe,
.remove = xhci_plat_remove,
.driver = {
.name = "xhci-hcd",
.pm = DEV_PM_OPS,
.of_match_table = of_match_ptr(usb_xhci_of_match),
},
};
MODULE_ALIAS("platform:xhci-hcd");
static int __init xhci_plat_init(void)
{
xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides);
return platform_driver_register(&usb_xhci_driver);
}
module_init(xhci_plat_init);
static void __exit xhci_plat_exit(void)
{
platform_driver_unregister(&usb_xhci_driver);
}
module_exit(xhci_plat_exit);
MODULE_DESCRIPTION("xHCI Platform Host Controller Driver");
MODULE_LICENSE("GPL");