OpenCloudOS-Kernel/arch/mips/kvm/mips.c

1699 lines
42 KiB
C
Raw Normal View History

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* KVM/MIPS: MIPS specific KVM APIs
*
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
* Authors: Sanjay Lal <sanjayl@kymasys.com>
*/
#include <linux/bitops.h>
#include <linux/errno.h>
#include <linux/err.h>
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
#include <linux/kdebug.h>
#include <linux/module.h>
#include <linux/uaccess.h>
#include <linux/vmalloc.h>
#include <linux/sched/signal.h>
#include <linux/fs.h>
#include <linux/bootmem.h>
KVM: MIPS: Don't leak FPU/DSP to guest The FPU and DSP are enabled via the CP0 Status CU1 and MX bits by kvm_mips_set_c0_status() on a guest exit, presumably in case there is active state that needs saving if pre-emption occurs. However neither of these bits are cleared again when returning to the guest. This effectively gives the guest access to the FPU/DSP hardware after the first guest exit even though it is not aware of its presence, allowing FP instructions in guest user code to intermittently actually execute instead of trapping into the guest OS for emulation. It will then read & manipulate the hardware FP registers which technically belong to the user process (e.g. QEMU), or are stale from another user process. It can also crash the guest OS by causing an FP exception, for which a guest exception handler won't have been registered. First lets save and disable the FPU (and MSA) state with lose_fpu(1) before entering the guest. This simplifies the problem, especially for when guest FPU/MSA support is added in the future, and prevents FR=1 FPU state being live when the FR bit gets cleared for the guest, which according to the architecture causes the contents of the FPU and vector registers to become UNPREDICTABLE. We can then safely remove the enabling of the FPU in kvm_mips_set_c0_status(), since there should never be any active FPU or MSA state to save at pre-emption, which should plug the FPU leak. DSP state is always live rather than being lazily restored, so for that it is simpler to just clear the MX bit again when re-entering the guest. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Sanjay Lal <sanjayl@kymasys.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # v3.10+: 044f0f03eca0: MIPS: KVM: Deliver guest interrupts Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-05 01:06:37 +08:00
#include <asm/fpu.h>
#include <asm/page.h>
#include <asm/cacheflush.h>
#include <asm/mmu_context.h>
#include <asm/pgalloc.h>
#include <asm/pgtable.h>
#include <linux/kvm_host.h>
#include "interrupt.h"
#include "commpage.h"
#define CREATE_TRACE_POINTS
#include "trace.h"
#ifndef VECTORSPACING
#define VECTORSPACING 0x100 /* for EI/VI mode */
#endif
#define VCPU_STAT(x) offsetof(struct kvm_vcpu, stat.x)
struct kvm_stats_debugfs_item debugfs_entries[] = {
{ "wait", VCPU_STAT(wait_exits), KVM_STAT_VCPU },
{ "cache", VCPU_STAT(cache_exits), KVM_STAT_VCPU },
{ "signal", VCPU_STAT(signal_exits), KVM_STAT_VCPU },
{ "interrupt", VCPU_STAT(int_exits), KVM_STAT_VCPU },
{ "cop_unsuable", VCPU_STAT(cop_unusable_exits), KVM_STAT_VCPU },
{ "tlbmod", VCPU_STAT(tlbmod_exits), KVM_STAT_VCPU },
{ "tlbmiss_ld", VCPU_STAT(tlbmiss_ld_exits), KVM_STAT_VCPU },
{ "tlbmiss_st", VCPU_STAT(tlbmiss_st_exits), KVM_STAT_VCPU },
{ "addrerr_st", VCPU_STAT(addrerr_st_exits), KVM_STAT_VCPU },
{ "addrerr_ld", VCPU_STAT(addrerr_ld_exits), KVM_STAT_VCPU },
{ "syscall", VCPU_STAT(syscall_exits), KVM_STAT_VCPU },
{ "resvd_inst", VCPU_STAT(resvd_inst_exits), KVM_STAT_VCPU },
{ "break_inst", VCPU_STAT(break_inst_exits), KVM_STAT_VCPU },
{ "trap_inst", VCPU_STAT(trap_inst_exits), KVM_STAT_VCPU },
{ "msa_fpe", VCPU_STAT(msa_fpe_exits), KVM_STAT_VCPU },
{ "fpe", VCPU_STAT(fpe_exits), KVM_STAT_VCPU },
{ "msa_disabled", VCPU_STAT(msa_disabled_exits), KVM_STAT_VCPU },
{ "flush_dcache", VCPU_STAT(flush_dcache_exits), KVM_STAT_VCPU },
#ifdef CONFIG_KVM_MIPS_VZ
{ "vz_gpsi", VCPU_STAT(vz_gpsi_exits), KVM_STAT_VCPU },
{ "vz_gsfc", VCPU_STAT(vz_gsfc_exits), KVM_STAT_VCPU },
{ "vz_hc", VCPU_STAT(vz_hc_exits), KVM_STAT_VCPU },
{ "vz_grr", VCPU_STAT(vz_grr_exits), KVM_STAT_VCPU },
{ "vz_gva", VCPU_STAT(vz_gva_exits), KVM_STAT_VCPU },
{ "vz_ghfc", VCPU_STAT(vz_ghfc_exits), KVM_STAT_VCPU },
{ "vz_gpa", VCPU_STAT(vz_gpa_exits), KVM_STAT_VCPU },
{ "vz_resvd", VCPU_STAT(vz_resvd_exits), KVM_STAT_VCPU },
#endif
kvm: add halt_poll_ns module parameter This patch introduces a new module parameter for the KVM module; when it is present, KVM attempts a bit of polling on every HLT before scheduling itself out via kvm_vcpu_block. This parameter helps a lot for latency-bound workloads---in particular I tested it with O_DSYNC writes with a battery-backed disk in the host. In this case, writes are fast (because the data doesn't have to go all the way to the platters) but they cannot be merged by either the host or the guest. KVM's performance here is usually around 30% of bare metal, or 50% if you use cache=directsync or cache=writethrough (these parameters avoid that the guest sends pointless flush requests, and at the same time they are not slow because of the battery-backed cache). The bad performance happens because on every halt the host CPU decides to halt itself too. When the interrupt comes, the vCPU thread is then migrated to a new physical CPU, and in general the latency is horrible because the vCPU thread has to be scheduled back in. With this patch performance reaches 60-65% of bare metal and, more important, 99% of what you get if you use idle=poll in the guest. This means that the tunable gets rid of this particular bottleneck, and more work can be done to improve performance in the kernel or QEMU. Of course there is some price to pay; every time an otherwise idle vCPUs is interrupted by an interrupt, it will poll unnecessarily and thus impose a little load on the host. The above results were obtained with a mostly random value of the parameter (500000), and the load was around 1.5-2.5% CPU usage on one of the host's core for each idle guest vCPU. The patch also adds a new stat, /sys/kernel/debug/kvm/halt_successful_poll, that can be used to tune the parameter. It counts how many HLT instructions received an interrupt during the polling period; each successful poll avoids that Linux schedules the VCPU thread out and back in, and may also avoid a likely trip to C1 and back for the physical CPU. While the VM is idle, a Linux 4 VCPU VM halts around 10 times per second. Of these halts, almost all are failed polls. During the benchmark, instead, basically all halts end within the polling period, except a more or less constant stream of 50 per second coming from vCPUs that are not running the benchmark. The wasted time is thus very low. Things may be slightly different for Windows VMs, which have a ~10 ms timer tick. The effect is also visible on Marcelo's recently-introduced latency test for the TSC deadline timer. Though of course a non-RT kernel has awful latency bounds, the latency of the timer is around 8000-10000 clock cycles compared to 20000-120000 without setting halt_poll_ns. For the TSC deadline timer, thus, the effect is both a smaller average latency and a smaller variance. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-05 01:20:58 +08:00
{ "halt_successful_poll", VCPU_STAT(halt_successful_poll), KVM_STAT_VCPU },
{ "halt_attempted_poll", VCPU_STAT(halt_attempted_poll), KVM_STAT_VCPU },
KVM: halt_polling: provide a way to qualify wakeups during poll Some wakeups should not be considered a sucessful poll. For example on s390 I/O interrupts are usually floating, which means that _ALL_ CPUs would be considered runnable - letting all vCPUs poll all the time for transactional like workload, even if one vCPU would be enough. This can result in huge CPU usage for large guests. This patch lets architectures provide a way to qualify wakeups if they should be considered a good/bad wakeups in regard to polls. For s390 the implementation will fence of halt polling for anything but known good, single vCPU events. The s390 implementation for floating interrupts does a wakeup for one vCPU, but the interrupt will be delivered by whatever CPU checks first for a pending interrupt. We prefer the woken up CPU by marking the poll of this CPU as "good" poll. This code will also mark several other wakeup reasons like IPI or expired timers as "good". This will of course also mark some events as not sucessful. As KVM on z runs always as a 2nd level hypervisor, we prefer to not poll, unless we are really sure, though. This patch successfully limits the CPU usage for cases like uperf 1byte transactional ping pong workload or wakeup heavy workload like OLTP while still providing a proper speedup. This also introduced a new vcpu stat "halt_poll_no_tuning" that marks wakeups that are considered not good for polling. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Radim Krčmář <rkrcmar@redhat.com> (for an earlier version) Cc: David Matlack <dmatlack@google.com> Cc: Wanpeng Li <kernellwp@gmail.com> [Rename config symbol. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-13 18:16:35 +08:00
{ "halt_poll_invalid", VCPU_STAT(halt_poll_invalid), KVM_STAT_VCPU },
{ "halt_wakeup", VCPU_STAT(halt_wakeup), KVM_STAT_VCPU },
{NULL}
};
bool kvm_trace_guest_mode_change;
int kvm_guest_mode_change_trace_reg(void)
{
kvm_trace_guest_mode_change = 1;
return 0;
}
void kvm_guest_mode_change_trace_unreg(void)
{
kvm_trace_guest_mode_change = 0;
}
/*
* XXXKYMA: We are simulatoring a processor that has the WII bit set in
* Config7, so we are "runnable" if interrupts are pending
*/
int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
{
return !!(vcpu->arch.pending_exceptions);
}
int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu)
{
return 1;
}
int kvm_arch_hardware_enable(void)
{
return kvm_mips_callbacks->hardware_enable();
}
void kvm_arch_hardware_disable(void)
{
kvm_mips_callbacks->hardware_disable();
}
int kvm_arch_hardware_setup(void)
{
return 0;
}
void kvm_arch_check_processor_compat(void *rtn)
{
*(int *)rtn = 0;
}
int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
{
2017-03-14 18:15:19 +08:00
switch (type) {
#ifdef CONFIG_KVM_MIPS_VZ
case KVM_VM_MIPS_VZ:
#else
2017-03-14 18:15:19 +08:00
case KVM_VM_MIPS_TE:
#endif
2017-03-14 18:15:19 +08:00
break;
default:
/* Unsupported KVM type */
return -EINVAL;
};
/* Allocate page table to map GPA -> RPA */
kvm->arch.gpa_mm.pgd = kvm_pgd_alloc();
if (!kvm->arch.gpa_mm.pgd)
return -ENOMEM;
return 0;
}
bool kvm_arch_has_vcpu_debugfs(void)
{
return false;
}
int kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu)
{
return 0;
}
void kvm_mips_free_vcpus(struct kvm *kvm)
{
unsigned int i;
struct kvm_vcpu *vcpu;
kvm_for_each_vcpu(i, vcpu, kvm) {
kvm_arch_vcpu_free(vcpu);
}
mutex_lock(&kvm->lock);
for (i = 0; i < atomic_read(&kvm->online_vcpus); i++)
kvm->vcpus[i] = NULL;
atomic_set(&kvm->online_vcpus, 0);
mutex_unlock(&kvm->lock);
}
static void kvm_mips_free_gpa_pt(struct kvm *kvm)
{
/* It should always be safe to remove after flushing the whole range */
WARN_ON(!kvm_mips_flush_gpa_pt(kvm, 0, ~0));
pgd_free(NULL, kvm->arch.gpa_mm.pgd);
}
void kvm_arch_destroy_vm(struct kvm *kvm)
{
kvm_mips_free_vcpus(kvm);
kvm_mips_free_gpa_pt(kvm);
}
long kvm_arch_dev_ioctl(struct file *filp, unsigned int ioctl,
unsigned long arg)
{
return -ENOIOCTLCMD;
}
int kvm_arch_create_memslot(struct kvm *kvm, struct kvm_memory_slot *slot,
unsigned long npages)
{
return 0;
}
void kvm_arch_flush_shadow_all(struct kvm *kvm)
{
/* Flush whole GPA */
kvm_mips_flush_gpa_pt(kvm, 0, ~0);
/* Let implementation do the rest */
kvm_mips_callbacks->flush_shadow_all(kvm);
}
void kvm_arch_flush_shadow_memslot(struct kvm *kvm,
struct kvm_memory_slot *slot)
{
/*
* The slot has been made invalid (ready for moving or deletion), so we
* need to ensure that it can no longer be accessed by any guest VCPUs.
*/
spin_lock(&kvm->mmu_lock);
/* Flush slot from GPA */
kvm_mips_flush_gpa_pt(kvm, slot->base_gfn,
slot->base_gfn + slot->npages - 1);
/* Let implementation do the rest */
kvm_mips_callbacks->flush_shadow_memslot(kvm, slot);
spin_unlock(&kvm->mmu_lock);
}
int kvm_arch_prepare_memory_region(struct kvm *kvm,
struct kvm_memory_slot *memslot,
const struct kvm_userspace_memory_region *mem,
enum kvm_mr_change change)
{
return 0;
}
void kvm_arch_commit_memory_region(struct kvm *kvm,
const struct kvm_userspace_memory_region *mem,
const struct kvm_memory_slot *old,
const struct kvm_memory_slot *new,
enum kvm_mr_change change)
{
int needs_flush;
kvm_debug("%s: kvm: %p slot: %d, GPA: %llx, size: %llx, QVA: %llx\n",
__func__, kvm, mem->slot, mem->guest_phys_addr,
mem->memory_size, mem->userspace_addr);
/*
* If dirty page logging is enabled, write protect all pages in the slot
* ready for dirty logging.
*
* There is no need to do this in any of the following cases:
* CREATE: No dirty mappings will already exist.
* MOVE/DELETE: The old mappings will already have been cleaned up by
* kvm_arch_flush_shadow_memslot()
*/
if (change == KVM_MR_FLAGS_ONLY &&
(!(old->flags & KVM_MEM_LOG_DIRTY_PAGES) &&
new->flags & KVM_MEM_LOG_DIRTY_PAGES)) {
spin_lock(&kvm->mmu_lock);
/* Write protect GPA page table entries */
needs_flush = kvm_mips_mkclean_gpa_pt(kvm, new->base_gfn,
new->base_gfn + new->npages - 1);
/* Let implementation do the rest */
if (needs_flush)
kvm_mips_callbacks->flush_shadow_memslot(kvm, new);
spin_unlock(&kvm->mmu_lock);
}
}
static inline void dump_handler(const char *symbol, void *start, void *end)
{
u32 *p;
pr_debug("LEAF(%s)\n", symbol);
pr_debug("\t.set push\n");
pr_debug("\t.set noreorder\n");
for (p = start; p < (u32 *)end; ++p)
pr_debug("\t.word\t0x%08x\t\t# %p\n", *p, p);
pr_debug("\t.set\tpop\n");
pr_debug("\tEND(%s)\n", symbol);
}
struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id)
{
int err, size;
void *gebase, *p, *handler, *refill_start, *refill_end;
int i;
struct kvm_vcpu *vcpu = kzalloc(sizeof(struct kvm_vcpu), GFP_KERNEL);
if (!vcpu) {
err = -ENOMEM;
goto out;
}
err = kvm_vcpu_init(vcpu, kvm, id);
if (err)
goto out_free_cpu;
kvm_debug("kvm @ %p: create cpu %d at %p\n", kvm, id, vcpu);
/*
* Allocate space for host mode exception handlers that handle
* guest mode exits
*/
if (cpu_has_veic || cpu_has_vint)
size = 0x200 + VECTORSPACING * 64;
else
size = 0x4000;
gebase = kzalloc(ALIGN(size, PAGE_SIZE), GFP_KERNEL);
if (!gebase) {
err = -ENOMEM;
goto out_uninit_cpu;
}
kvm_debug("Allocated %d bytes for KVM Exception Handlers @ %p\n",
ALIGN(size, PAGE_SIZE), gebase);
/*
* Check new ebase actually fits in CP0_EBase. The lack of a write gate
* limits us to the low 512MB of physical address space. If the memory
* we allocate is out of range, just give up now.
*/
if (!cpu_has_ebase_wg && virt_to_phys(gebase) >= 0x20000000) {
kvm_err("CP0_EBase.WG required for guest exception base %pK\n",
gebase);
err = -ENOMEM;
goto out_free_gebase;
}
/* Save new ebase */
vcpu->arch.guest_ebase = gebase;
/* Build guest exception vectors dynamically in unmapped memory */
handler = gebase + 0x2000;
/* TLB refill (or XTLB refill on 64-bit VZ where KX=1) */
refill_start = gebase;
if (IS_ENABLED(CONFIG_KVM_MIPS_VZ) && IS_ENABLED(CONFIG_64BIT))
refill_start += 0x080;
refill_end = kvm_mips_build_tlb_refill_exception(refill_start, handler);
/* General Exception Entry point */
kvm_mips_build_exception(gebase + 0x180, handler);
/* For vectored interrupts poke the exception code @ all offsets 0-7 */
for (i = 0; i < 8; i++) {
kvm_debug("L1 Vectored handler @ %p\n",
gebase + 0x200 + (i * VECTORSPACING));
kvm_mips_build_exception(gebase + 0x200 + i * VECTORSPACING,
handler);
}
/* General exit handler */
p = handler;
p = kvm_mips_build_exit(p);
/* Guest entry routine */
vcpu->arch.vcpu_run = p;
p = kvm_mips_build_vcpu_run(p);
/* Dump the generated code */
pr_debug("#include <asm/asm.h>\n");
pr_debug("#include <asm/regdef.h>\n");
pr_debug("\n");
dump_handler("kvm_vcpu_run", vcpu->arch.vcpu_run, p);
dump_handler("kvm_tlb_refill", refill_start, refill_end);
dump_handler("kvm_gen_exc", gebase + 0x180, gebase + 0x200);
dump_handler("kvm_exit", gebase + 0x2000, vcpu->arch.vcpu_run);
/* Invalidate the icache for these ranges */
flush_icache_range((unsigned long)gebase,
(unsigned long)gebase + ALIGN(size, PAGE_SIZE));
/*
* Allocate comm page for guest kernel, a TLB will be reserved for
* mapping GVA @ 0xFFFF8000 to this page
*/
vcpu->arch.kseg0_commpage = kzalloc(PAGE_SIZE << 1, GFP_KERNEL);
if (!vcpu->arch.kseg0_commpage) {
err = -ENOMEM;
goto out_free_gebase;
}
kvm_debug("Allocated COMM page @ %p\n", vcpu->arch.kseg0_commpage);
kvm_mips_commpage_init(vcpu);
/* Init */
vcpu->arch.last_sched_cpu = -1;
vcpu->arch.last_exec_cpu = -1;
return vcpu;
out_free_gebase:
kfree(gebase);
out_uninit_cpu:
kvm_vcpu_uninit(vcpu);
out_free_cpu:
kfree(vcpu);
out:
return ERR_PTR(err);
}
void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
{
hrtimer_cancel(&vcpu->arch.comparecount_timer);
kvm_vcpu_uninit(vcpu);
kvm_mips_dump_stats(vcpu);
kvm_mmu_free_memory_caches(vcpu);
kfree(vcpu->arch.guest_ebase);
kfree(vcpu->arch.kseg0_commpage);
kfree(vcpu);
}
void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
{
kvm_arch_vcpu_free(vcpu);
}
int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
struct kvm_guest_debug *dbg)
{
return -ENOIOCTLCMD;
}
int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
int r = -EINTR;
sigset_t sigsaved;
if (vcpu->sigset_active)
sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
if (vcpu->mmio_needed) {
if (!vcpu->mmio_is_write)
kvm_mips_complete_mmio_load(vcpu, run);
vcpu->mmio_needed = 0;
}
if (run->immediate_exit)
goto out;
KVM: MIPS: Don't leak FPU/DSP to guest The FPU and DSP are enabled via the CP0 Status CU1 and MX bits by kvm_mips_set_c0_status() on a guest exit, presumably in case there is active state that needs saving if pre-emption occurs. However neither of these bits are cleared again when returning to the guest. This effectively gives the guest access to the FPU/DSP hardware after the first guest exit even though it is not aware of its presence, allowing FP instructions in guest user code to intermittently actually execute instead of trapping into the guest OS for emulation. It will then read & manipulate the hardware FP registers which technically belong to the user process (e.g. QEMU), or are stale from another user process. It can also crash the guest OS by causing an FP exception, for which a guest exception handler won't have been registered. First lets save and disable the FPU (and MSA) state with lose_fpu(1) before entering the guest. This simplifies the problem, especially for when guest FPU/MSA support is added in the future, and prevents FR=1 FPU state being live when the FR bit gets cleared for the guest, which according to the architecture causes the contents of the FPU and vector registers to become UNPREDICTABLE. We can then safely remove the enabling of the FPU in kvm_mips_set_c0_status(), since there should never be any active FPU or MSA state to save at pre-emption, which should plug the FPU leak. DSP state is always live rather than being lazily restored, so for that it is simpler to just clear the MX bit again when re-entering the guest. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Sanjay Lal <sanjayl@kymasys.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # v3.10+: 044f0f03eca0: MIPS: KVM: Deliver guest interrupts Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-05 01:06:37 +08:00
lose_fpu(1);
local_irq_disable();
guest_enter_irqoff();
trace_kvm_enter(vcpu);
/*
* Make sure the read of VCPU requests in vcpu_run() callback is not
* reordered ahead of the write to vcpu->mode, or we could miss a TLB
* flush request while the requester sees the VCPU as outside of guest
* mode and not needing an IPI.
*/
smp_store_mb(vcpu->mode, IN_GUEST_MODE);
r = kvm_mips_callbacks->vcpu_run(run, vcpu);
trace_kvm_out(vcpu);
guest_exit_irqoff();
local_irq_enable();
out:
if (vcpu->sigset_active)
sigprocmask(SIG_SETMASK, &sigsaved, NULL);
return r;
}
int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu,
struct kvm_mips_interrupt *irq)
{
int intr = (int)irq->irq;
struct kvm_vcpu *dvcpu = NULL;
if (intr == 3 || intr == -3 || intr == 4 || intr == -4)
kvm_debug("%s: CPU: %d, INTR: %d\n", __func__, irq->cpu,
(int)intr);
if (irq->cpu == -1)
dvcpu = vcpu;
else
dvcpu = vcpu->kvm->vcpus[irq->cpu];
if (intr == 2 || intr == 3 || intr == 4) {
kvm_mips_callbacks->queue_io_int(dvcpu, irq);
} else if (intr == -2 || intr == -3 || intr == -4) {
kvm_mips_callbacks->dequeue_io_int(dvcpu, irq);
} else {
kvm_err("%s: invalid interrupt ioctl (%d:%d)\n", __func__,
irq->cpu, irq->irq);
return -EINVAL;
}
dvcpu->arch.wait = 0;
KVM: Use simple waitqueue for vcpu->wq The problem: On -rt, an emulated LAPIC timer instances has the following path: 1) hard interrupt 2) ksoftirqd is scheduled 3) ksoftirqd wakes up vcpu thread 4) vcpu thread is scheduled This extra context switch introduces unnecessary latency in the LAPIC path for a KVM guest. The solution: Allow waking up vcpu thread from hardirq context, thus avoiding the need for ksoftirqd to be scheduled. Normal waitqueues make use of spinlocks, which on -RT are sleepable locks. Therefore, waking up a waitqueue waiter involves locking a sleeping lock, which is not allowed from hard interrupt context. cyclictest command line: This patch reduces the average latency in my tests from 14us to 11us. Daniel writes: Paolo asked for numbers from kvm-unit-tests/tscdeadline_latency benchmark on mainline. The test was run 1000 times on tip/sched/core 4.4.0-rc8-01134-g0905f04: ./x86-run x86/tscdeadline_latency.flat -cpu host with idle=poll. The test seems not to deliver really stable numbers though most of them are smaller. Paolo write: "Anything above ~10000 cycles means that the host went to C1 or lower---the number means more or less nothing in that case. The mean shows an improvement indeed." Before: min max mean std count 1000.000000 1000.000000 1000.000000 1000.000000 mean 5162.596000 2019270.084000 5824.491541 20681.645558 std 75.431231 622607.723969 89.575700 6492.272062 min 4466.000000 23928.000000 5537.926500 585.864966 25% 5163.000000 1613252.750000 5790.132275 16683.745433 50% 5175.000000 2281919.000000 5834.654000 23151.990026 75% 5190.000000 2382865.750000 5861.412950 24148.206168 max 5228.000000 4175158.000000 6254.827300 46481.048691 After min max mean std count 1000.000000 1000.00000 1000.000000 1000.000000 mean 5143.511000 2076886.10300 5813.312474 21207.357565 std 77.668322 610413.09583 86.541500 6331.915127 min 4427.000000 25103.00000 5529.756600 559.187707 25% 5148.000000 1691272.75000 5784.889825 17473.518244 50% 5160.000000 2308328.50000 5832.025000 23464.837068 75% 5172.000000 2393037.75000 5853.177675 24223.969976 max 5222.000000 3922458.00000 6186.720500 42520.379830 [Patch was originaly based on the swait implementation found in the -rt tree. Daniel ported it to mainline's version and gathered the benchmark numbers for tscdeadline_latency test.] Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-rt-users@vger.kernel.org Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1455871601-27484-4-git-send-email-wagi@monom.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-19 16:46:39 +08:00
if (swait_active(&dvcpu->wq))
swake_up(&dvcpu->wq);
return 0;
}
int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
struct kvm_mp_state *mp_state)
{
return -ENOIOCTLCMD;
}
int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
struct kvm_mp_state *mp_state)
{
return -ENOIOCTLCMD;
}
static u64 kvm_mips_get_one_regs[] = {
KVM_REG_MIPS_R0,
KVM_REG_MIPS_R1,
KVM_REG_MIPS_R2,
KVM_REG_MIPS_R3,
KVM_REG_MIPS_R4,
KVM_REG_MIPS_R5,
KVM_REG_MIPS_R6,
KVM_REG_MIPS_R7,
KVM_REG_MIPS_R8,
KVM_REG_MIPS_R9,
KVM_REG_MIPS_R10,
KVM_REG_MIPS_R11,
KVM_REG_MIPS_R12,
KVM_REG_MIPS_R13,
KVM_REG_MIPS_R14,
KVM_REG_MIPS_R15,
KVM_REG_MIPS_R16,
KVM_REG_MIPS_R17,
KVM_REG_MIPS_R18,
KVM_REG_MIPS_R19,
KVM_REG_MIPS_R20,
KVM_REG_MIPS_R21,
KVM_REG_MIPS_R22,
KVM_REG_MIPS_R23,
KVM_REG_MIPS_R24,
KVM_REG_MIPS_R25,
KVM_REG_MIPS_R26,
KVM_REG_MIPS_R27,
KVM_REG_MIPS_R28,
KVM_REG_MIPS_R29,
KVM_REG_MIPS_R30,
KVM_REG_MIPS_R31,
#ifndef CONFIG_CPU_MIPSR6
KVM_REG_MIPS_HI,
KVM_REG_MIPS_LO,
#endif
KVM_REG_MIPS_PC,
};
static u64 kvm_mips_get_one_regs_fpu[] = {
KVM_REG_MIPS_FCR_IR,
KVM_REG_MIPS_FCR_CSR,
};
static u64 kvm_mips_get_one_regs_msa[] = {
KVM_REG_MIPS_MSA_IR,
KVM_REG_MIPS_MSA_CSR,
};
static unsigned long kvm_mips_num_regs(struct kvm_vcpu *vcpu)
{
unsigned long ret;
ret = ARRAY_SIZE(kvm_mips_get_one_regs);
if (kvm_mips_guest_can_have_fpu(&vcpu->arch)) {
ret += ARRAY_SIZE(kvm_mips_get_one_regs_fpu) + 48;
/* odd doubles */
if (boot_cpu_data.fpu_id & MIPS_FPIR_F64)
ret += 16;
}
if (kvm_mips_guest_can_have_msa(&vcpu->arch))
ret += ARRAY_SIZE(kvm_mips_get_one_regs_msa) + 32;
ret += kvm_mips_callbacks->num_regs(vcpu);
return ret;
}
static int kvm_mips_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices)
{
u64 index;
unsigned int i;
if (copy_to_user(indices, kvm_mips_get_one_regs,
sizeof(kvm_mips_get_one_regs)))
return -EFAULT;
indices += ARRAY_SIZE(kvm_mips_get_one_regs);
if (kvm_mips_guest_can_have_fpu(&vcpu->arch)) {
if (copy_to_user(indices, kvm_mips_get_one_regs_fpu,
sizeof(kvm_mips_get_one_regs_fpu)))
return -EFAULT;
indices += ARRAY_SIZE(kvm_mips_get_one_regs_fpu);
for (i = 0; i < 32; ++i) {
index = KVM_REG_MIPS_FPR_32(i);
if (copy_to_user(indices, &index, sizeof(index)))
return -EFAULT;
++indices;
/* skip odd doubles if no F64 */
if (i & 1 && !(boot_cpu_data.fpu_id & MIPS_FPIR_F64))
continue;
index = KVM_REG_MIPS_FPR_64(i);
if (copy_to_user(indices, &index, sizeof(index)))
return -EFAULT;
++indices;
}
}
if (kvm_mips_guest_can_have_msa(&vcpu->arch)) {
if (copy_to_user(indices, kvm_mips_get_one_regs_msa,
sizeof(kvm_mips_get_one_regs_msa)))
return -EFAULT;
indices += ARRAY_SIZE(kvm_mips_get_one_regs_msa);
for (i = 0; i < 32; ++i) {
index = KVM_REG_MIPS_VEC_128(i);
if (copy_to_user(indices, &index, sizeof(index)))
return -EFAULT;
++indices;
}
}
return kvm_mips_callbacks->copy_reg_indices(vcpu, indices);
}
static int kvm_mips_get_reg(struct kvm_vcpu *vcpu,
const struct kvm_one_reg *reg)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_fpu_struct *fpu = &vcpu->arch.fpu;
int ret;
s64 v;
s64 vs[2];
unsigned int idx;
switch (reg->id) {
/* General purpose registers */
case KVM_REG_MIPS_R0 ... KVM_REG_MIPS_R31:
v = (long)vcpu->arch.gprs[reg->id - KVM_REG_MIPS_R0];
break;
#ifndef CONFIG_CPU_MIPSR6
case KVM_REG_MIPS_HI:
v = (long)vcpu->arch.hi;
break;
case KVM_REG_MIPS_LO:
v = (long)vcpu->arch.lo;
break;
#endif
case KVM_REG_MIPS_PC:
v = (long)vcpu->arch.pc;
break;
/* Floating point registers */
case KVM_REG_MIPS_FPR_32(0) ... KVM_REG_MIPS_FPR_32(31):
if (!kvm_mips_guest_has_fpu(&vcpu->arch))
return -EINVAL;
idx = reg->id - KVM_REG_MIPS_FPR_32(0);
/* Odd singles in top of even double when FR=0 */
if (kvm_read_c0_guest_status(cop0) & ST0_FR)
v = get_fpr32(&fpu->fpr[idx], 0);
else
v = get_fpr32(&fpu->fpr[idx & ~1], idx & 1);
break;
case KVM_REG_MIPS_FPR_64(0) ... KVM_REG_MIPS_FPR_64(31):
if (!kvm_mips_guest_has_fpu(&vcpu->arch))
return -EINVAL;
idx = reg->id - KVM_REG_MIPS_FPR_64(0);
/* Can't access odd doubles in FR=0 mode */
if (idx & 1 && !(kvm_read_c0_guest_status(cop0) & ST0_FR))
return -EINVAL;
v = get_fpr64(&fpu->fpr[idx], 0);
break;
case KVM_REG_MIPS_FCR_IR:
if (!kvm_mips_guest_has_fpu(&vcpu->arch))
return -EINVAL;
v = boot_cpu_data.fpu_id;
break;
case KVM_REG_MIPS_FCR_CSR:
if (!kvm_mips_guest_has_fpu(&vcpu->arch))
return -EINVAL;
v = fpu->fcr31;
break;
/* MIPS SIMD Architecture (MSA) registers */
case KVM_REG_MIPS_VEC_128(0) ... KVM_REG_MIPS_VEC_128(31):
if (!kvm_mips_guest_has_msa(&vcpu->arch))
return -EINVAL;
/* Can't access MSA registers in FR=0 mode */
if (!(kvm_read_c0_guest_status(cop0) & ST0_FR))
return -EINVAL;
idx = reg->id - KVM_REG_MIPS_VEC_128(0);
#ifdef CONFIG_CPU_LITTLE_ENDIAN
/* least significant byte first */
vs[0] = get_fpr64(&fpu->fpr[idx], 0);
vs[1] = get_fpr64(&fpu->fpr[idx], 1);
#else
/* most significant byte first */
vs[0] = get_fpr64(&fpu->fpr[idx], 1);
vs[1] = get_fpr64(&fpu->fpr[idx], 0);
#endif
break;
case KVM_REG_MIPS_MSA_IR:
if (!kvm_mips_guest_has_msa(&vcpu->arch))
return -EINVAL;
v = boot_cpu_data.msa_id;
break;
case KVM_REG_MIPS_MSA_CSR:
if (!kvm_mips_guest_has_msa(&vcpu->arch))
return -EINVAL;
v = fpu->msacsr;
break;
/* registers to be handled specially */
default:
ret = kvm_mips_callbacks->get_one_reg(vcpu, reg, &v);
if (ret)
return ret;
break;
}
if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U64) {
u64 __user *uaddr64 = (u64 __user *)(long)reg->addr;
return put_user(v, uaddr64);
} else if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U32) {
u32 __user *uaddr32 = (u32 __user *)(long)reg->addr;
u32 v32 = (u32)v;
return put_user(v32, uaddr32);
} else if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U128) {
void __user *uaddr = (void __user *)(long)reg->addr;
return copy_to_user(uaddr, vs, 16) ? -EFAULT : 0;
} else {
return -EINVAL;
}
}
static int kvm_mips_set_reg(struct kvm_vcpu *vcpu,
const struct kvm_one_reg *reg)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_fpu_struct *fpu = &vcpu->arch.fpu;
s64 v;
s64 vs[2];
unsigned int idx;
if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U64) {
u64 __user *uaddr64 = (u64 __user *)(long)reg->addr;
if (get_user(v, uaddr64) != 0)
return -EFAULT;
} else if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U32) {
u32 __user *uaddr32 = (u32 __user *)(long)reg->addr;
s32 v32;
if (get_user(v32, uaddr32) != 0)
return -EFAULT;
v = (s64)v32;
} else if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U128) {
void __user *uaddr = (void __user *)(long)reg->addr;
return copy_from_user(vs, uaddr, 16) ? -EFAULT : 0;
} else {
return -EINVAL;
}
switch (reg->id) {
/* General purpose registers */
case KVM_REG_MIPS_R0:
/* Silently ignore requests to set $0 */
break;
case KVM_REG_MIPS_R1 ... KVM_REG_MIPS_R31:
vcpu->arch.gprs[reg->id - KVM_REG_MIPS_R0] = v;
break;
#ifndef CONFIG_CPU_MIPSR6
case KVM_REG_MIPS_HI:
vcpu->arch.hi = v;
break;
case KVM_REG_MIPS_LO:
vcpu->arch.lo = v;
break;
#endif
case KVM_REG_MIPS_PC:
vcpu->arch.pc = v;
break;
/* Floating point registers */
case KVM_REG_MIPS_FPR_32(0) ... KVM_REG_MIPS_FPR_32(31):
if (!kvm_mips_guest_has_fpu(&vcpu->arch))
return -EINVAL;
idx = reg->id - KVM_REG_MIPS_FPR_32(0);
/* Odd singles in top of even double when FR=0 */
if (kvm_read_c0_guest_status(cop0) & ST0_FR)
set_fpr32(&fpu->fpr[idx], 0, v);
else
set_fpr32(&fpu->fpr[idx & ~1], idx & 1, v);
break;
case KVM_REG_MIPS_FPR_64(0) ... KVM_REG_MIPS_FPR_64(31):
if (!kvm_mips_guest_has_fpu(&vcpu->arch))
return -EINVAL;
idx = reg->id - KVM_REG_MIPS_FPR_64(0);
/* Can't access odd doubles in FR=0 mode */
if (idx & 1 && !(kvm_read_c0_guest_status(cop0) & ST0_FR))
return -EINVAL;
set_fpr64(&fpu->fpr[idx], 0, v);
break;
case KVM_REG_MIPS_FCR_IR:
if (!kvm_mips_guest_has_fpu(&vcpu->arch))
return -EINVAL;
/* Read-only */
break;
case KVM_REG_MIPS_FCR_CSR:
if (!kvm_mips_guest_has_fpu(&vcpu->arch))
return -EINVAL;
fpu->fcr31 = v;
break;
/* MIPS SIMD Architecture (MSA) registers */
case KVM_REG_MIPS_VEC_128(0) ... KVM_REG_MIPS_VEC_128(31):
if (!kvm_mips_guest_has_msa(&vcpu->arch))
return -EINVAL;
idx = reg->id - KVM_REG_MIPS_VEC_128(0);
#ifdef CONFIG_CPU_LITTLE_ENDIAN
/* least significant byte first */
set_fpr64(&fpu->fpr[idx], 0, vs[0]);
set_fpr64(&fpu->fpr[idx], 1, vs[1]);
#else
/* most significant byte first */
set_fpr64(&fpu->fpr[idx], 1, vs[0]);
set_fpr64(&fpu->fpr[idx], 0, vs[1]);
#endif
break;
case KVM_REG_MIPS_MSA_IR:
if (!kvm_mips_guest_has_msa(&vcpu->arch))
return -EINVAL;
/* Read-only */
break;
case KVM_REG_MIPS_MSA_CSR:
if (!kvm_mips_guest_has_msa(&vcpu->arch))
return -EINVAL;
fpu->msacsr = v;
break;
/* registers to be handled specially */
default:
return kvm_mips_callbacks->set_one_reg(vcpu, reg, v);
}
return 0;
}
static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
struct kvm_enable_cap *cap)
{
int r = 0;
if (!kvm_vm_ioctl_check_extension(vcpu->kvm, cap->cap))
return -EINVAL;
if (cap->flags)
return -EINVAL;
if (cap->args[0])
return -EINVAL;
switch (cap->cap) {
case KVM_CAP_MIPS_FPU:
vcpu->arch.fpu_enabled = true;
break;
case KVM_CAP_MIPS_MSA:
vcpu->arch.msa_enabled = true;
break;
default:
r = -EINVAL;
break;
}
return r;
}
long kvm_arch_vcpu_ioctl(struct file *filp, unsigned int ioctl,
unsigned long arg)
{
struct kvm_vcpu *vcpu = filp->private_data;
void __user *argp = (void __user *)arg;
long r;
switch (ioctl) {
case KVM_SET_ONE_REG:
case KVM_GET_ONE_REG: {
struct kvm_one_reg reg;
if (copy_from_user(&reg, argp, sizeof(reg)))
return -EFAULT;
if (ioctl == KVM_SET_ONE_REG)
return kvm_mips_set_reg(vcpu, &reg);
else
return kvm_mips_get_reg(vcpu, &reg);
}
case KVM_GET_REG_LIST: {
struct kvm_reg_list __user *user_list = argp;
struct kvm_reg_list reg_list;
unsigned n;
if (copy_from_user(&reg_list, user_list, sizeof(reg_list)))
return -EFAULT;
n = reg_list.n;
reg_list.n = kvm_mips_num_regs(vcpu);
if (copy_to_user(user_list, &reg_list, sizeof(reg_list)))
return -EFAULT;
if (n < reg_list.n)
return -E2BIG;
return kvm_mips_copy_reg_indices(vcpu, user_list->reg);
}
case KVM_INTERRUPT:
{
struct kvm_mips_interrupt irq;
if (copy_from_user(&irq, argp, sizeof(irq)))
return -EFAULT;
kvm_debug("[%d] %s: irq: %d\n", vcpu->vcpu_id, __func__,
irq.irq);
r = kvm_vcpu_ioctl_interrupt(vcpu, &irq);
break;
}
case KVM_ENABLE_CAP: {
struct kvm_enable_cap cap;
if (copy_from_user(&cap, argp, sizeof(cap)))
return -EFAULT;
r = kvm_vcpu_ioctl_enable_cap(vcpu, &cap);
break;
}
default:
r = -ENOIOCTLCMD;
}
return r;
}
/**
* kvm_vm_ioctl_get_dirty_log - get and clear the log of dirty pages in a slot
* @kvm: kvm instance
* @log: slot id and address to which we copy the log
*
* Steps 1-4 below provide general overview of dirty page logging. See
* kvm_get_dirty_log_protect() function description for additional details.
*
* We call kvm_get_dirty_log_protect() to handle steps 1-3, upon return we
* always flush the TLB (step 4) even if previous step failed and the dirty
* bitmap may be corrupt. Regardless of previous outcome the KVM logging API
* does not preclude user space subsequent dirty log read. Flushing TLB ensures
* writes will be marked dirty for next log read.
*
* 1. Take a snapshot of the bit and clear it if needed.
* 2. Write protect the corresponding page.
* 3. Copy the snapshot to the userspace.
* 4. Flush TLB's if needed.
*/
int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log)
{
struct kvm_memslots *slots;
struct kvm_memory_slot *memslot;
bool is_dirty = false;
int r;
mutex_lock(&kvm->slots_lock);
r = kvm_get_dirty_log_protect(kvm, log, &is_dirty);
if (is_dirty) {
slots = kvm_memslots(kvm);
memslot = id_to_memslot(slots, log->slot);
/* Let implementation handle TLB/GVA invalidation */
kvm_mips_callbacks->flush_shadow_memslot(kvm, memslot);
}
mutex_unlock(&kvm->slots_lock);
return r;
}
long kvm_arch_vm_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg)
{
long r;
switch (ioctl) {
default:
r = -ENOIOCTLCMD;
}
return r;
}
int kvm_arch_init(void *opaque)
{
if (kvm_mips_callbacks) {
kvm_err("kvm: module already exists\n");
return -EEXIST;
}
return kvm_mips_emulation_init(&kvm_mips_callbacks);
}
void kvm_arch_exit(void)
{
kvm_mips_callbacks = NULL;
}
int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
struct kvm_sregs *sregs)
{
return -ENOIOCTLCMD;
}
int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
struct kvm_sregs *sregs)
{
return -ENOIOCTLCMD;
}
void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
{
}
int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
{
return -ENOIOCTLCMD;
}
int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
{
return -ENOIOCTLCMD;
}
int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf)
{
return VM_FAULT_SIGBUS;
}
int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
{
int r;
switch (ext) {
case KVM_CAP_ONE_REG:
case KVM_CAP_ENABLE_CAP:
case KVM_CAP_READONLY_MEM:
KVM: MIPS/MMU: Implement KVM_CAP_SYNC_MMU Implement the SYNC_MMU capability for KVM MIPS, allowing changes in the underlying user host virtual address (HVA) mappings to be promptly reflected in the corresponding guest physical address (GPA) mappings. This allows for several features to work with guest RAM which require mappings to be altered or protected, such as copy-on-write, KSM (Kernel Samepage Merging), idle page tracking, memory swapping, and guest memory ballooning. There are two main aspects of this change, described below. The KVM MMU notifier architecture callbacks are implemented so we can be notified of changes in the HVA mappings. These arrange for the guest physical address (GPA) page tables to be modified and possibly for derived mappings (GVA page tables and TLBs) to be flushed. - kvm_unmap_hva[_range]() - These deal with HVA mappings being removed, for example before a copy-on-write takes place, which requires the corresponding GPA page table mappings to be removed too. - kvm_set_spte_hva() - These update a GPA page table entry to match the new HVA entry, but must be careful to respect KVM specific configuration such as not dirtying a clean guest page which is dirty to the host, and write protecting writable pages in read only memslots (which will soon be supported). - kvm[_test]_age_hva() - These update GPA page table entries to be old (invalid) so that access can be tracked, making them young again. The GPA page fault handling (kvm_mips_map_page) is updated to use gfn_to_pfn_prot() (which may provide read-only pages), to handle asynchronous page table invalidation from MMU notifier callbacks, and to handle more cases in the fast path. - mmu_notifier_seq is used to detect asynchronous page table invalidations while we're holding a pfn from gfn_to_pfn_prot() outside of kvm->mmu_lock, retrying if invalidations have taken place, e.g. a COW or a KSM page merge. - The fast path (_kvm_mips_map_page_fast) now handles marking old pages as young / accessed, and disallowing dirtying of clean pages that aren't actually writable (e.g. shared pages that should COW, and read-only memory regions when they are enabled in a future patch). - Due to the use of MMU notifications we no longer need to keep the page references after we've updated the GPA page tables. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2016-12-14 00:32:39 +08:00
case KVM_CAP_SYNC_MMU:
case KVM_CAP_IMMEDIATE_EXIT:
r = 1;
break;
case KVM_CAP_NR_VCPUS:
r = num_online_cpus();
break;
case KVM_CAP_MAX_VCPUS:
r = KVM_MAX_VCPUS;
break;
case KVM_CAP_MIPS_FPU:
/* We don't handle systems with inconsistent cpu_has_fpu */
r = !!raw_cpu_has_fpu;
break;
case KVM_CAP_MIPS_MSA:
/*
* We don't support MSA vector partitioning yet:
* 1) It would require explicit support which can't be tested
* yet due to lack of support in current hardware.
* 2) It extends the state that would need to be saved/restored
* by e.g. QEMU for migration.
*
* When vector partitioning hardware becomes available, support
* could be added by requiring a flag when enabling
* KVM_CAP_MIPS_MSA capability to indicate that userland knows
* to save/restore the appropriate extra state.
*/
r = cpu_has_msa && !(boot_cpu_data.msa_id & MSA_IR_WRPF);
break;
default:
r = kvm_mips_callbacks->check_extension(kvm, ext);
break;
}
return r;
}
int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
{
return kvm_mips_pending_timer(vcpu) ||
kvm_read_c0_guest_cause(vcpu->arch.cop0) & C_TI;
}
int kvm_arch_vcpu_dump_regs(struct kvm_vcpu *vcpu)
{
int i;
struct mips_coproc *cop0;
if (!vcpu)
return -1;
kvm_debug("VCPU Register Dump:\n");
kvm_debug("\tpc = 0x%08lx\n", vcpu->arch.pc);
kvm_debug("\texceptions: %08lx\n", vcpu->arch.pending_exceptions);
for (i = 0; i < 32; i += 4) {
kvm_debug("\tgpr%02d: %08lx %08lx %08lx %08lx\n", i,
vcpu->arch.gprs[i],
vcpu->arch.gprs[i + 1],
vcpu->arch.gprs[i + 2], vcpu->arch.gprs[i + 3]);
}
kvm_debug("\thi: 0x%08lx\n", vcpu->arch.hi);
kvm_debug("\tlo: 0x%08lx\n", vcpu->arch.lo);
cop0 = vcpu->arch.cop0;
KVM: MIPS: Abstract guest CP0 register access for VZ Abstract the MIPS KVM guest CP0 register access macros into inline functions which are generated by macros. This allows them to be generated differently for VZ, where they will usually need to access the hardware guest CP0 context rather than the saved values in RAM. Accessors for each individual register are generated using these macros: - __BUILD_KVM_*_SW() for registers which are not present in the VZ hardware guest context, so kvm_{read,write}_c0_guest_##name() will access the saved value in RAM regardless of whether VZ is enabled. - __BUILD_KVM_*_HW() for registers which are present in the VZ hardware guest context, so kvm_{read,write}_c0_guest_##name() will access the hardware register when VZ is enabled. These build the underlying accessors using further macros: - __BUILD_KVM_*_SAVED() builds e.g. kvm_{read,write}_sw_gc0_##name() functions for accessing the saved versions of the registers in RAM. This is used for implementing the common kvm_{read,write}_c0_guest_##name() accessors with T&E where registers are always stored in RAM, but are also available with VZ HW registers to allow them to be accessed while saved. - __BUILD_KVM_*_VZ() builds e.g. kvm_{read,write}_vz_gc0_##name() functions for accessing the VZ hardware guest context registers directly. This is used for implementing the common kvm_{read,write}_c0_guest_##name() accessors with VZ. - __BUILD_KVM_*_WRAP() builds wrappers with different names, which allows the common kvm_{read,write}_c0_guest_##name() functions to be implemented using the VZ accessors while still having the SAVED accessors available too. - __BUILD_KVM_SAVE_VZ() builds functions for saving and restoring VZ hardware guest context register state to RAM, improving conciseness of VZ context saving and restoring. Similar macros exist for generating modifiers (set, clear, change), either with a normal unlocked read/modify/write, or using atomic LL/SC sequences. These changes change the types of 32-bit registers to u32 instead of unsigned long, which requires some changes to printk() functions in MIPS KVM. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-03-14 18:15:25 +08:00
kvm_debug("\tStatus: 0x%08x, Cause: 0x%08x\n",
kvm_read_c0_guest_status(cop0),
kvm_read_c0_guest_cause(cop0));
kvm_debug("\tEPC: 0x%08lx\n", kvm_read_c0_guest_epc(cop0));
return 0;
}
int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
{
int i;
for (i = 1; i < ARRAY_SIZE(vcpu->arch.gprs); i++)
vcpu->arch.gprs[i] = regs->gpr[i];
vcpu->arch.gprs[0] = 0; /* zero is special, and cannot be set. */
vcpu->arch.hi = regs->hi;
vcpu->arch.lo = regs->lo;
vcpu->arch.pc = regs->pc;
return 0;
}
int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
{
int i;
for (i = 0; i < ARRAY_SIZE(vcpu->arch.gprs); i++)
regs->gpr[i] = vcpu->arch.gprs[i];
regs->hi = vcpu->arch.hi;
regs->lo = vcpu->arch.lo;
regs->pc = vcpu->arch.pc;
return 0;
}
static void kvm_mips_comparecount_func(unsigned long data)
{
struct kvm_vcpu *vcpu = (struct kvm_vcpu *)data;
kvm_mips_callbacks->queue_timer_int(vcpu);
vcpu->arch.wait = 0;
KVM: Use simple waitqueue for vcpu->wq The problem: On -rt, an emulated LAPIC timer instances has the following path: 1) hard interrupt 2) ksoftirqd is scheduled 3) ksoftirqd wakes up vcpu thread 4) vcpu thread is scheduled This extra context switch introduces unnecessary latency in the LAPIC path for a KVM guest. The solution: Allow waking up vcpu thread from hardirq context, thus avoiding the need for ksoftirqd to be scheduled. Normal waitqueues make use of spinlocks, which on -RT are sleepable locks. Therefore, waking up a waitqueue waiter involves locking a sleeping lock, which is not allowed from hard interrupt context. cyclictest command line: This patch reduces the average latency in my tests from 14us to 11us. Daniel writes: Paolo asked for numbers from kvm-unit-tests/tscdeadline_latency benchmark on mainline. The test was run 1000 times on tip/sched/core 4.4.0-rc8-01134-g0905f04: ./x86-run x86/tscdeadline_latency.flat -cpu host with idle=poll. The test seems not to deliver really stable numbers though most of them are smaller. Paolo write: "Anything above ~10000 cycles means that the host went to C1 or lower---the number means more or less nothing in that case. The mean shows an improvement indeed." Before: min max mean std count 1000.000000 1000.000000 1000.000000 1000.000000 mean 5162.596000 2019270.084000 5824.491541 20681.645558 std 75.431231 622607.723969 89.575700 6492.272062 min 4466.000000 23928.000000 5537.926500 585.864966 25% 5163.000000 1613252.750000 5790.132275 16683.745433 50% 5175.000000 2281919.000000 5834.654000 23151.990026 75% 5190.000000 2382865.750000 5861.412950 24148.206168 max 5228.000000 4175158.000000 6254.827300 46481.048691 After min max mean std count 1000.000000 1000.00000 1000.000000 1000.000000 mean 5143.511000 2076886.10300 5813.312474 21207.357565 std 77.668322 610413.09583 86.541500 6331.915127 min 4427.000000 25103.00000 5529.756600 559.187707 25% 5148.000000 1691272.75000 5784.889825 17473.518244 50% 5160.000000 2308328.50000 5832.025000 23464.837068 75% 5172.000000 2393037.75000 5853.177675 24223.969976 max 5222.000000 3922458.00000 6186.720500 42520.379830 [Patch was originaly based on the swait implementation found in the -rt tree. Daniel ported it to mainline's version and gathered the benchmark numbers for tscdeadline_latency test.] Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-rt-users@vger.kernel.org Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1455871601-27484-4-git-send-email-wagi@monom.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-19 16:46:39 +08:00
if (swait_active(&vcpu->wq))
swake_up(&vcpu->wq);
}
/* low level hrtimer wake routine */
static enum hrtimer_restart kvm_mips_comparecount_wakeup(struct hrtimer *timer)
{
struct kvm_vcpu *vcpu;
vcpu = container_of(timer, struct kvm_vcpu, arch.comparecount_timer);
kvm_mips_comparecount_func((unsigned long) vcpu);
MIPS: KVM: Rewrite count/compare timer emulation Previously the emulation of the CPU timer was just enough to get a Linux guest running but some shortcuts were taken: - The guest timer interrupt was hard coded to always happen every 10 ms rather than being timed to when CP0_Count would match CP0_Compare. - The guest's CP0_Count register was based on the host's CP0_Count register. This isn't very portable and fails on cores without a CP_Count register implemented such as Ingenic XBurst. It also meant that the guest's CP0_Cause.DC bit to disable the CP0_Count register took no effect. - The guest's CP0_Count register was emulated by just dividing the host's CP0_Count register by 4. This resulted in continuity problems when used as a clock source, since when the host CP0_Count overflows from 0x7fffffff to 0x80000000, the guest CP0_Count transitions discontinuously from 0x1fffffff to 0xe0000000. Therefore rewrite & fix emulation of the guest timer based on the monotonic kernel time (i.e. ktime_get()). Internally a 32-bit count_bias value is added to the frequency scaled nanosecond monotonic time to get the guest's CP0_Count. The frequency of the timer is initialised to 100MHz and cannot yet be changed, but a later patch will allow the frequency to be configured via the KVM_{GET,SET}_ONE_REG ioctl interface. The timer can now be stopped via the CP0_Cause.DC bit (by the guest or via the KVM_SET_ONE_REG ioctl interface), at which point the current CP0_Count is stored and can be read directly. When it is restarted the bias is recalculated such that the CP0_Count value is continuous. Due to the nature of hrtimer interrupts any read of the guest's CP0_Count register while it is running triggers a check for whether the hrtimer has expired, so that the guest/userland cannot observe the CP0_Count passing CP0_Compare without queuing a timer interrupt. This is also taken advantage of when stopping the timer to ensure that a pending timer interrupt is queued. This replaces the implementation of: - Guest read of CP0_Count - Guest write of CP0_Count - Guest write of CP0_Compare - Guest write of CP0_Cause - Guest read of HWR 2 (CC) with RDHWR - Host read of CP0_Count via KVM_GET_ONE_REG ioctl interface - Host write of CP0_Count via KVM_SET_ONE_REG ioctl interface - Host write of CP0_Compare via KVM_SET_ONE_REG ioctl interface - Host write of CP0_Cause via KVM_SET_ONE_REG ioctl interface Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-29 17:16:35 +08:00
return kvm_mips_count_timeout(vcpu);
}
int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
{
int err;
err = kvm_mips_callbacks->vcpu_init(vcpu);
if (err)
return err;
hrtimer_init(&vcpu->arch.comparecount_timer, CLOCK_MONOTONIC,
HRTIMER_MODE_REL);
vcpu->arch.comparecount_timer.function = kvm_mips_comparecount_wakeup;
return 0;
}
void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu)
{
kvm_mips_callbacks->vcpu_uninit(vcpu);
}
int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
struct kvm_translation *tr)
{
return 0;
}
/* Initial guest state */
int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
{
return kvm_mips_callbacks->vcpu_setup(vcpu);
}
static void kvm_mips_set_c0_status(void)
{
u32 status = read_c0_status();
if (cpu_has_dsp)
status |= (ST0_MX);
write_c0_status(status);
ehb();
}
/*
* Return value is in the form (errcode<<2 | RESUME_FLAG_HOST | RESUME_FLAG_NV)
*/
int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
{
u32 cause = vcpu->arch.host_cp0_cause;
u32 exccode = (cause >> CAUSEB_EXCCODE) & 0x1f;
u32 __user *opc = (u32 __user *) vcpu->arch.pc;
unsigned long badvaddr = vcpu->arch.host_cp0_badvaddr;
enum emulation_result er = EMULATE_DONE;
u32 inst;
int ret = RESUME_GUEST;
vcpu->mode = OUTSIDE_GUEST_MODE;
/* re-enable HTW before enabling interrupts */
if (!IS_ENABLED(CONFIG_KVM_MIPS_VZ))
htw_start();
/* Set a default exit reason */
run->exit_reason = KVM_EXIT_UNKNOWN;
run->ready_for_interrupt_injection = 1;
/*
* Set the appropriate status bits based on host CPU features,
* before we hit the scheduler
*/
kvm_mips_set_c0_status();
local_irq_enable();
kvm_debug("kvm_mips_handle_exit: cause: %#x, PC: %p, kvm_run: %p, kvm_vcpu: %p\n",
cause, opc, run, vcpu);
trace_kvm_exit(vcpu, exccode);
if (!IS_ENABLED(CONFIG_KVM_MIPS_VZ)) {
/*
* Do a privilege check, if in UM most of these exit conditions
* end up causing an exception to be delivered to the Guest
* Kernel
*/
er = kvm_mips_check_privilege(cause, opc, run, vcpu);
if (er == EMULATE_PRIV_FAIL) {
goto skip_emul;
} else if (er == EMULATE_FAIL) {
run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
ret = RESUME_HOST;
goto skip_emul;
}
}
switch (exccode) {
case EXCCODE_INT:
kvm_debug("[%d]EXCCODE_INT @ %p\n", vcpu->vcpu_id, opc);
++vcpu->stat.int_exits;
if (need_resched())
cond_resched();
ret = RESUME_GUEST;
break;
case EXCCODE_CPU:
kvm_debug("EXCCODE_CPU: @ PC: %p\n", opc);
++vcpu->stat.cop_unusable_exits;
ret = kvm_mips_callbacks->handle_cop_unusable(vcpu);
/* XXXKYMA: Might need to return to user space */
if (run->exit_reason == KVM_EXIT_IRQ_WINDOW_OPEN)
ret = RESUME_HOST;
break;
case EXCCODE_MOD:
++vcpu->stat.tlbmod_exits;
ret = kvm_mips_callbacks->handle_tlb_mod(vcpu);
break;
case EXCCODE_TLBS:
KVM: MIPS: Abstract guest CP0 register access for VZ Abstract the MIPS KVM guest CP0 register access macros into inline functions which are generated by macros. This allows them to be generated differently for VZ, where they will usually need to access the hardware guest CP0 context rather than the saved values in RAM. Accessors for each individual register are generated using these macros: - __BUILD_KVM_*_SW() for registers which are not present in the VZ hardware guest context, so kvm_{read,write}_c0_guest_##name() will access the saved value in RAM regardless of whether VZ is enabled. - __BUILD_KVM_*_HW() for registers which are present in the VZ hardware guest context, so kvm_{read,write}_c0_guest_##name() will access the hardware register when VZ is enabled. These build the underlying accessors using further macros: - __BUILD_KVM_*_SAVED() builds e.g. kvm_{read,write}_sw_gc0_##name() functions for accessing the saved versions of the registers in RAM. This is used for implementing the common kvm_{read,write}_c0_guest_##name() accessors with T&E where registers are always stored in RAM, but are also available with VZ HW registers to allow them to be accessed while saved. - __BUILD_KVM_*_VZ() builds e.g. kvm_{read,write}_vz_gc0_##name() functions for accessing the VZ hardware guest context registers directly. This is used for implementing the common kvm_{read,write}_c0_guest_##name() accessors with VZ. - __BUILD_KVM_*_WRAP() builds wrappers with different names, which allows the common kvm_{read,write}_c0_guest_##name() functions to be implemented using the VZ accessors while still having the SAVED accessors available too. - __BUILD_KVM_SAVE_VZ() builds functions for saving and restoring VZ hardware guest context register state to RAM, improving conciseness of VZ context saving and restoring. Similar macros exist for generating modifiers (set, clear, change), either with a normal unlocked read/modify/write, or using atomic LL/SC sequences. These changes change the types of 32-bit registers to u32 instead of unsigned long, which requires some changes to printk() functions in MIPS KVM. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-03-14 18:15:25 +08:00
kvm_debug("TLB ST fault: cause %#x, status %#x, PC: %p, BadVaddr: %#lx\n",
cause, kvm_read_c0_guest_status(vcpu->arch.cop0), opc,
badvaddr);
++vcpu->stat.tlbmiss_st_exits;
ret = kvm_mips_callbacks->handle_tlb_st_miss(vcpu);
break;
case EXCCODE_TLBL:
kvm_debug("TLB LD fault: cause %#x, PC: %p, BadVaddr: %#lx\n",
cause, opc, badvaddr);
++vcpu->stat.tlbmiss_ld_exits;
ret = kvm_mips_callbacks->handle_tlb_ld_miss(vcpu);
break;
case EXCCODE_ADES:
++vcpu->stat.addrerr_st_exits;
ret = kvm_mips_callbacks->handle_addr_err_st(vcpu);
break;
case EXCCODE_ADEL:
++vcpu->stat.addrerr_ld_exits;
ret = kvm_mips_callbacks->handle_addr_err_ld(vcpu);
break;
case EXCCODE_SYS:
++vcpu->stat.syscall_exits;
ret = kvm_mips_callbacks->handle_syscall(vcpu);
break;
case EXCCODE_RI:
++vcpu->stat.resvd_inst_exits;
ret = kvm_mips_callbacks->handle_res_inst(vcpu);
break;
case EXCCODE_BP:
++vcpu->stat.break_inst_exits;
ret = kvm_mips_callbacks->handle_break(vcpu);
break;
case EXCCODE_TR:
++vcpu->stat.trap_inst_exits;
ret = kvm_mips_callbacks->handle_trap(vcpu);
break;
case EXCCODE_MSAFPE:
++vcpu->stat.msa_fpe_exits;
ret = kvm_mips_callbacks->handle_msa_fpe(vcpu);
break;
case EXCCODE_FPE:
++vcpu->stat.fpe_exits;
ret = kvm_mips_callbacks->handle_fpe(vcpu);
break;
case EXCCODE_MSADIS:
++vcpu->stat.msa_disabled_exits;
ret = kvm_mips_callbacks->handle_msa_disabled(vcpu);
break;
case EXCCODE_GE:
/* defer exit accounting to handler */
ret = kvm_mips_callbacks->handle_guest_exit(vcpu);
break;
default:
if (cause & CAUSEF_BD)
opc += 1;
inst = 0;
kvm_get_badinstr(opc, vcpu, &inst);
KVM: MIPS: Abstract guest CP0 register access for VZ Abstract the MIPS KVM guest CP0 register access macros into inline functions which are generated by macros. This allows them to be generated differently for VZ, where they will usually need to access the hardware guest CP0 context rather than the saved values in RAM. Accessors for each individual register are generated using these macros: - __BUILD_KVM_*_SW() for registers which are not present in the VZ hardware guest context, so kvm_{read,write}_c0_guest_##name() will access the saved value in RAM regardless of whether VZ is enabled. - __BUILD_KVM_*_HW() for registers which are present in the VZ hardware guest context, so kvm_{read,write}_c0_guest_##name() will access the hardware register when VZ is enabled. These build the underlying accessors using further macros: - __BUILD_KVM_*_SAVED() builds e.g. kvm_{read,write}_sw_gc0_##name() functions for accessing the saved versions of the registers in RAM. This is used for implementing the common kvm_{read,write}_c0_guest_##name() accessors with T&E where registers are always stored in RAM, but are also available with VZ HW registers to allow them to be accessed while saved. - __BUILD_KVM_*_VZ() builds e.g. kvm_{read,write}_vz_gc0_##name() functions for accessing the VZ hardware guest context registers directly. This is used for implementing the common kvm_{read,write}_c0_guest_##name() accessors with VZ. - __BUILD_KVM_*_WRAP() builds wrappers with different names, which allows the common kvm_{read,write}_c0_guest_##name() functions to be implemented using the VZ accessors while still having the SAVED accessors available too. - __BUILD_KVM_SAVE_VZ() builds functions for saving and restoring VZ hardware guest context register state to RAM, improving conciseness of VZ context saving and restoring. Similar macros exist for generating modifiers (set, clear, change), either with a normal unlocked read/modify/write, or using atomic LL/SC sequences. These changes change the types of 32-bit registers to u32 instead of unsigned long, which requires some changes to printk() functions in MIPS KVM. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-03-14 18:15:25 +08:00
kvm_err("Exception Code: %d, not yet handled, @ PC: %p, inst: 0x%08x BadVaddr: %#lx Status: %#x\n",
exccode, opc, inst, badvaddr,
kvm_read_c0_guest_status(vcpu->arch.cop0));
kvm_arch_vcpu_dump_regs(vcpu);
run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
ret = RESUME_HOST;
break;
}
skip_emul:
local_irq_disable();
if (ret == RESUME_GUEST)
kvm_vz_acquire_htimer(vcpu);
if (er == EMULATE_DONE && !(ret & RESUME_HOST))
kvm_mips_deliver_interrupts(vcpu, cause);
if (!(ret & RESUME_HOST)) {
/* Only check for signals if not already exiting to userspace */
if (signal_pending(current)) {
run->exit_reason = KVM_EXIT_INTR;
ret = (-EINTR << 2) | RESUME_HOST;
++vcpu->stat.signal_exits;
trace_kvm_exit(vcpu, KVM_TRACE_EXIT_SIGNAL);
}
}
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
if (ret == RESUME_GUEST) {
trace_kvm_reenter(vcpu);
/*
* Make sure the read of VCPU requests in vcpu_reenter()
* callback is not reordered ahead of the write to vcpu->mode,
* or we could miss a TLB flush request while the requester sees
* the VCPU as outside of guest mode and not needing an IPI.
*/
smp_store_mb(vcpu->mode, IN_GUEST_MODE);
kvm_mips_callbacks->vcpu_reenter(run, vcpu);
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
/*
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
* If FPU / MSA are enabled (i.e. the guest's FPU / MSA context
* is live), restore FCR31 / MSACSR.
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
*
* This should be before returning to the guest exception
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
* vector, as it may well cause an [MSA] FP exception if there
* are pending exception bits unmasked. (see
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
* kvm_mips_csr_die_notifier() for how that is handled).
*/
if (kvm_mips_guest_has_fpu(&vcpu->arch) &&
read_c0_status() & ST0_CU1)
__kvm_restore_fcsr(&vcpu->arch);
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
if (kvm_mips_guest_has_msa(&vcpu->arch) &&
read_c0_config5() & MIPS_CONF5_MSAEN)
__kvm_restore_msacsr(&vcpu->arch);
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
}
/* Disable HTW before returning to guest or host */
if (!IS_ENABLED(CONFIG_KVM_MIPS_VZ))
htw_stop();
return ret;
}
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
/* Enable FPU for guest and restore context */
void kvm_own_fpu(struct kvm_vcpu *vcpu)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
unsigned int sr, cfg5;
preempt_disable();
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
sr = kvm_read_c0_guest_status(cop0);
/*
* If MSA state is already live, it is undefined how it interacts with
* FR=0 FPU state, and we don't want to hit reserved instruction
* exceptions trying to save the MSA state later when CU=1 && FR=1, so
* play it safe and save it first.
*
* In theory we shouldn't ever hit this case since kvm_lose_fpu() should
* get called when guest CU1 is set, however we can't trust the guest
* not to clobber the status register directly via the commpage.
*/
if (cpu_has_msa && sr & ST0_CU1 && !(sr & ST0_FR) &&
vcpu->arch.aux_inuse & KVM_MIPS_AUX_MSA)
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
kvm_lose_fpu(vcpu);
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
/*
* Enable FPU for guest
* We set FR and FRE according to guest context
*/
change_c0_status(ST0_CU1 | ST0_FR, sr);
if (cpu_has_fre) {
cfg5 = kvm_read_c0_guest_config5(cop0);
change_c0_config5(MIPS_CONF5_FRE, cfg5);
}
enable_fpu_hazard();
/* If guest FPU state not active, restore it now */
if (!(vcpu->arch.aux_inuse & KVM_MIPS_AUX_FPU)) {
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
__kvm_restore_fpu(&vcpu->arch);
vcpu->arch.aux_inuse |= KVM_MIPS_AUX_FPU;
trace_kvm_aux(vcpu, KVM_TRACE_AUX_RESTORE, KVM_TRACE_AUX_FPU);
} else {
trace_kvm_aux(vcpu, KVM_TRACE_AUX_ENABLE, KVM_TRACE_AUX_FPU);
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
}
preempt_enable();
}
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
#ifdef CONFIG_CPU_HAS_MSA
/* Enable MSA for guest and restore context */
void kvm_own_msa(struct kvm_vcpu *vcpu)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
unsigned int sr, cfg5;
preempt_disable();
/*
* Enable FPU if enabled in guest, since we're restoring FPU context
* anyway. We set FR and FRE according to guest context.
*/
if (kvm_mips_guest_has_fpu(&vcpu->arch)) {
sr = kvm_read_c0_guest_status(cop0);
/*
* If FR=0 FPU state is already live, it is undefined how it
* interacts with MSA state, so play it safe and save it first.
*/
if (!(sr & ST0_FR) &&
(vcpu->arch.aux_inuse & (KVM_MIPS_AUX_FPU |
KVM_MIPS_AUX_MSA)) == KVM_MIPS_AUX_FPU)
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
kvm_lose_fpu(vcpu);
change_c0_status(ST0_CU1 | ST0_FR, sr);
if (sr & ST0_CU1 && cpu_has_fre) {
cfg5 = kvm_read_c0_guest_config5(cop0);
change_c0_config5(MIPS_CONF5_FRE, cfg5);
}
}
/* Enable MSA for guest */
set_c0_config5(MIPS_CONF5_MSAEN);
enable_fpu_hazard();
switch (vcpu->arch.aux_inuse & (KVM_MIPS_AUX_FPU | KVM_MIPS_AUX_MSA)) {
case KVM_MIPS_AUX_FPU:
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
/*
* Guest FPU state already loaded, only restore upper MSA state
*/
__kvm_restore_msa_upper(&vcpu->arch);
vcpu->arch.aux_inuse |= KVM_MIPS_AUX_MSA;
trace_kvm_aux(vcpu, KVM_TRACE_AUX_RESTORE, KVM_TRACE_AUX_MSA);
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
break;
case 0:
/* Neither FPU or MSA already active, restore full MSA state */
__kvm_restore_msa(&vcpu->arch);
vcpu->arch.aux_inuse |= KVM_MIPS_AUX_MSA;
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
if (kvm_mips_guest_has_fpu(&vcpu->arch))
vcpu->arch.aux_inuse |= KVM_MIPS_AUX_FPU;
trace_kvm_aux(vcpu, KVM_TRACE_AUX_RESTORE,
KVM_TRACE_AUX_FPU_MSA);
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
break;
default:
trace_kvm_aux(vcpu, KVM_TRACE_AUX_ENABLE, KVM_TRACE_AUX_MSA);
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
break;
}
preempt_enable();
}
#endif
/* Drop FPU & MSA without saving it */
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
void kvm_drop_fpu(struct kvm_vcpu *vcpu)
{
preempt_disable();
if (cpu_has_msa && vcpu->arch.aux_inuse & KVM_MIPS_AUX_MSA) {
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
disable_msa();
trace_kvm_aux(vcpu, KVM_TRACE_AUX_DISCARD, KVM_TRACE_AUX_MSA);
vcpu->arch.aux_inuse &= ~KVM_MIPS_AUX_MSA;
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
}
if (vcpu->arch.aux_inuse & KVM_MIPS_AUX_FPU) {
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
clear_c0_status(ST0_CU1 | ST0_FR);
trace_kvm_aux(vcpu, KVM_TRACE_AUX_DISCARD, KVM_TRACE_AUX_FPU);
vcpu->arch.aux_inuse &= ~KVM_MIPS_AUX_FPU;
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
}
preempt_enable();
}
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
/* Save and disable FPU & MSA */
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
void kvm_lose_fpu(struct kvm_vcpu *vcpu)
{
/*
* With T&E, FPU & MSA get disabled in root context (hardware) when it
* is disabled in guest context (software), but the register state in
* the hardware may still be in use.
* This is why we explicitly re-enable the hardware before saving.
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
*/
preempt_disable();
if (cpu_has_msa && vcpu->arch.aux_inuse & KVM_MIPS_AUX_MSA) {
if (!IS_ENABLED(CONFIG_KVM_MIPS_VZ)) {
set_c0_config5(MIPS_CONF5_MSAEN);
enable_fpu_hazard();
}
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
__kvm_save_msa(&vcpu->arch);
trace_kvm_aux(vcpu, KVM_TRACE_AUX_SAVE, KVM_TRACE_AUX_FPU_MSA);
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
/* Disable MSA & FPU */
disable_msa();
if (vcpu->arch.aux_inuse & KVM_MIPS_AUX_FPU) {
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
clear_c0_status(ST0_CU1 | ST0_FR);
disable_fpu_hazard();
}
vcpu->arch.aux_inuse &= ~(KVM_MIPS_AUX_FPU | KVM_MIPS_AUX_MSA);
} else if (vcpu->arch.aux_inuse & KVM_MIPS_AUX_FPU) {
if (!IS_ENABLED(CONFIG_KVM_MIPS_VZ)) {
set_c0_status(ST0_CU1);
enable_fpu_hazard();
}
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
__kvm_save_fpu(&vcpu->arch);
vcpu->arch.aux_inuse &= ~KVM_MIPS_AUX_FPU;
trace_kvm_aux(vcpu, KVM_TRACE_AUX_SAVE, KVM_TRACE_AUX_FPU);
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
/* Disable FPU */
clear_c0_status(ST0_CU1 | ST0_FR);
disable_fpu_hazard();
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
}
preempt_enable();
}
/*
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
* Step over a specific ctc1 to FCSR and a specific ctcmsa to MSACSR which are
* used to restore guest FCSR/MSACSR state and may trigger a "harmless" FP/MSAFP
* exception if cause bits are set in the value being written.
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
*/
static int kvm_mips_csr_die_notify(struct notifier_block *self,
unsigned long cmd, void *ptr)
{
struct die_args *args = (struct die_args *)ptr;
struct pt_regs *regs = args->regs;
unsigned long pc;
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
/* Only interested in FPE and MSAFPE */
if (cmd != DIE_FP && cmd != DIE_MSAFP)
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
return NOTIFY_DONE;
/* Return immediately if guest context isn't active */
if (!(current->flags & PF_VCPU))
return NOTIFY_DONE;
/* Should never get here from user mode */
BUG_ON(user_mode(regs));
pc = instruction_pointer(regs);
switch (cmd) {
case DIE_FP:
/* match 2nd instruction in __kvm_restore_fcsr */
if (pc != (unsigned long)&__kvm_restore_fcsr + 4)
return NOTIFY_DONE;
break;
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
case DIE_MSAFP:
/* match 2nd/3rd instruction in __kvm_restore_msacsr */
if (!cpu_has_msa ||
pc < (unsigned long)&__kvm_restore_msacsr + 4 ||
pc > (unsigned long)&__kvm_restore_msacsr + 8)
return NOTIFY_DONE;
break;
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
}
/* Move PC forward a little and continue executing */
instruction_pointer(regs) += 4;
return NOTIFY_STOP;
}
static struct notifier_block kvm_mips_csr_die_notifier = {
.notifier_call = kvm_mips_csr_die_notify,
};
static int __init kvm_mips_init(void)
{
int ret;
ret = kvm_mips_entry_setup();
if (ret)
return ret;
ret = kvm_init(NULL, sizeof(struct kvm_vcpu), 0, THIS_MODULE);
if (ret)
return ret;
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
register_die_notifier(&kvm_mips_csr_die_notifier);
return 0;
}
static void __exit kvm_mips_exit(void)
{
kvm_exit();
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
unregister_die_notifier(&kvm_mips_csr_die_notifier);
}
module_init(kvm_mips_init);
module_exit(kvm_mips_exit);
EXPORT_TRACEPOINT_SYMBOL(kvm_exit);