OpenCloudOS-Kernel/fs/ext4/inode.c

6195 lines
179 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* linux/fs/ext4/inode.c
*
* Copyright (C) 1992, 1993, 1994, 1995
* Remy Card (card@masi.ibp.fr)
* Laboratoire MASI - Institut Blaise Pascal
* Universite Pierre et Marie Curie (Paris VI)
*
* from
*
* linux/fs/minix/inode.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* 64-bit file support on 64-bit platforms by Jakub Jelinek
* (jj@sunsite.ms.mff.cuni.cz)
*
* Assorted race fixes, rewrite of ext4_get_block() by Al Viro, 2000
*/
#include <linux/fs.h>
ext4: support idmapped mounts Enable idmapped mounts for ext4. All dedicated helpers we need for this exist. So this basically just means we're passing down the user_namespace argument from the VFS methods to the relevant helpers. Let's create simple example where we idmap an ext4 filesystem: root@f2-vm:~# truncate -s 5G ext4.img root@f2-vm:~# mkfs.ext4 ./ext4.img mke2fs 1.45.5 (07-Jan-2020) Discarding device blocks: done Creating filesystem with 1310720 4k blocks and 327680 inodes Filesystem UUID: 3fd91794-c6ca-4b0f-9964-289a000919cf Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736 Allocating group tables: done Writing inode tables: done Creating journal (16384 blocks): done Writing superblocks and filesystem accounting information: done root@f2-vm:~# losetup -f --show ./ext4.img /dev/loop0 root@f2-vm:~# mount /dev/loop0 /mnt root@f2-vm:~# ls -al /mnt/ total 24 drwxr-xr-x 3 root root 4096 Oct 28 13:34 . drwxr-xr-x 30 root root 4096 Oct 28 13:22 .. drwx------ 2 root root 16384 Oct 28 13:34 lost+found # Let's create an idmapped mount at /idmapped1 where we map uid and gid # 0 to uid and gid 1000 root@f2-vm:/# ./mount-idmapped --map-mount b:0:1000:1 /mnt/ /idmapped1/ root@f2-vm:/# ls -al /idmapped1/ total 24 drwxr-xr-x 3 ubuntu ubuntu 4096 Oct 28 13:34 . drwxr-xr-x 30 root root 4096 Oct 28 13:22 .. drwx------ 2 ubuntu ubuntu 16384 Oct 28 13:34 lost+found # Let's create an idmapped mount at /idmapped2 where we map uid and gid # 0 to uid and gid 2000 root@f2-vm:/# ./mount-idmapped --map-mount b:0:2000:1 /mnt/ /idmapped2/ root@f2-vm:/# ls -al /idmapped2/ total 24 drwxr-xr-x 3 2000 2000 4096 Oct 28 13:34 . drwxr-xr-x 31 root root 4096 Oct 28 13:39 .. drwx------ 2 2000 2000 16384 Oct 28 13:34 lost+found Let's create another example where we idmap the rootfs filesystem without a mapping for uid 0 and gid 0: # Create an idmapped mount of for a full POSIX range of rootfs under # /mnt but without a mapping for uid 0 to reduce attack surface root@f2-vm:/# ./mount-idmapped --map-mount b:1:1:65536 / /mnt/ # Since we don't have a mapping for uid and gid 0 all files owned by # uid and gid 0 should show up as uid and gid 65534: root@f2-vm:/# ls -al /mnt/ total 664 drwxr-xr-x 31 nobody nogroup 4096 Oct 28 13:39 . drwxr-xr-x 31 root root 4096 Oct 28 13:39 .. lrwxrwxrwx 1 nobody nogroup 7 Aug 25 07:44 bin -> usr/bin drwxr-xr-x 4 nobody nogroup 4096 Oct 28 13:17 boot drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:48 dev drwxr-xr-x 81 nobody nogroup 4096 Oct 28 04:00 etc drwxr-xr-x 4 nobody nogroup 4096 Oct 28 04:00 home lrwxrwxrwx 1 nobody nogroup 7 Aug 25 07:44 lib -> usr/lib lrwxrwxrwx 1 nobody nogroup 9 Aug 25 07:44 lib32 -> usr/lib32 lrwxrwxrwx 1 nobody nogroup 9 Aug 25 07:44 lib64 -> usr/lib64 lrwxrwxrwx 1 nobody nogroup 10 Aug 25 07:44 libx32 -> usr/libx32 drwx------ 2 nobody nogroup 16384 Aug 25 07:47 lost+found drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 media drwxr-xr-x 31 nobody nogroup 4096 Oct 28 13:39 mnt drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 opt drwxr-xr-x 2 nobody nogroup 4096 Apr 15 2020 proc drwx--x--x 6 nobody nogroup 4096 Oct 28 13:34 root drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:46 run lrwxrwxrwx 1 nobody nogroup 8 Aug 25 07:44 sbin -> usr/sbin drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 srv drwxr-xr-x 2 nobody nogroup 4096 Apr 15 2020 sys drwxrwxrwt 10 nobody nogroup 4096 Oct 28 13:19 tmp drwxr-xr-x 14 nobody nogroup 4096 Oct 20 13:00 usr drwxr-xr-x 12 nobody nogroup 4096 Aug 25 07:45 var # Since we do have a mapping for uid and gid 1000 all files owned by # uid and gid 1000 should simply show up as uid and gid 1000: root@f2-vm:/# ls -al /mnt/home/ubuntu/ total 40 drwxr-xr-x 3 ubuntu ubuntu 4096 Oct 28 00:43 . drwxr-xr-x 4 nobody nogroup 4096 Oct 28 04:00 .. -rw------- 1 ubuntu ubuntu 2936 Oct 28 12:26 .bash_history -rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout -rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc -rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile -rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful -rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo Link: https://lore.kernel.org/r/20210121131959.646623-39-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-ext4@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 21:19:57 +08:00
#include <linux/mount.h>
#include <linux/time.h>
#include <linux/highuid.h>
#include <linux/pagemap.h>
#include <linux/dax.h>
#include <linux/quotaops.h>
#include <linux/string.h>
#include <linux/buffer_head.h>
#include <linux/writeback.h>
#include <linux/pagevec.h>
#include <linux/mpage.h>
#include <linux/namei.h>
#include <linux/uio.h>
#include <linux/bio.h>
#include <linux/workqueue.h>
#include <linux/kernel.h>
#include <linux/printk.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/bitops.h>
#include <linux/iomap.h>
#include <linux/iversion.h>
#include "ext4_jbd2.h"
#include "xattr.h"
#include "acl.h"
#include "truncate.h"
#include <trace/events/ext4.h>
static __u32 ext4_inode_csum(struct inode *inode, struct ext4_inode *raw,
struct ext4_inode_info *ei)
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
__u32 csum;
__u16 dummy_csum = 0;
int offset = offsetof(struct ext4_inode, i_checksum_lo);
unsigned int csum_size = sizeof(dummy_csum);
csum = ext4_chksum(sbi, ei->i_csum_seed, (__u8 *)raw, offset);
csum = ext4_chksum(sbi, csum, (__u8 *)&dummy_csum, csum_size);
offset += csum_size;
csum = ext4_chksum(sbi, csum, (__u8 *)raw + offset,
EXT4_GOOD_OLD_INODE_SIZE - offset);
if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE) {
offset = offsetof(struct ext4_inode, i_checksum_hi);
csum = ext4_chksum(sbi, csum, (__u8 *)raw +
EXT4_GOOD_OLD_INODE_SIZE,
offset - EXT4_GOOD_OLD_INODE_SIZE);
if (EXT4_FITS_IN_INODE(raw, ei, i_checksum_hi)) {
csum = ext4_chksum(sbi, csum, (__u8 *)&dummy_csum,
csum_size);
offset += csum_size;
}
csum = ext4_chksum(sbi, csum, (__u8 *)raw + offset,
EXT4_INODE_SIZE(inode->i_sb) - offset);
}
return csum;
}
static int ext4_inode_csum_verify(struct inode *inode, struct ext4_inode *raw,
struct ext4_inode_info *ei)
{
__u32 provided, calculated;
if (EXT4_SB(inode->i_sb)->s_es->s_creator_os !=
cpu_to_le32(EXT4_OS_LINUX) ||
!ext4_has_metadata_csum(inode->i_sb))
return 1;
provided = le16_to_cpu(raw->i_checksum_lo);
calculated = ext4_inode_csum(inode, raw, ei);
if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE &&
EXT4_FITS_IN_INODE(raw, ei, i_checksum_hi))
provided |= ((__u32)le16_to_cpu(raw->i_checksum_hi)) << 16;
else
calculated &= 0xFFFF;
return provided == calculated;
}
void ext4_inode_csum_set(struct inode *inode, struct ext4_inode *raw,
struct ext4_inode_info *ei)
{
__u32 csum;
if (EXT4_SB(inode->i_sb)->s_es->s_creator_os !=
cpu_to_le32(EXT4_OS_LINUX) ||
!ext4_has_metadata_csum(inode->i_sb))
return;
csum = ext4_inode_csum(inode, raw, ei);
raw->i_checksum_lo = cpu_to_le16(csum & 0xFFFF);
if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE &&
EXT4_FITS_IN_INODE(raw, ei, i_checksum_hi))
raw->i_checksum_hi = cpu_to_le16(csum >> 16);
}
static inline int ext4_begin_ordered_truncate(struct inode *inode,
loff_t new_size)
{
trace_ext4_begin_ordered_truncate(inode, new_size);
/*
* If jinode is zero, then we never opened the file for
* writing, so there's no need to call
* jbd2_journal_begin_ordered_truncate() since there's no
* outstanding writes we need to flush.
*/
if (!EXT4_I(inode)->jinode)
return 0;
return jbd2_journal_begin_ordered_truncate(EXT4_JOURNAL(inode),
EXT4_I(inode)->jinode,
new_size);
}
static int __ext4_journalled_writepage(struct page *page, unsigned int len);
static int ext4_meta_trans_blocks(struct inode *inode, int lblocks,
int pextents);
/*
* Test whether an inode is a fast symlink.
ext4: change fast symlink test to not rely on i_blocks ext4_inode_info->i_data is the storage area for 4 types of data: a) Extents data b) Inline data c) Block map d) Fast symlink data (symlink length < 60) Extents data case is positively identified by EXT4_INODE_EXTENTS flag. Inline data case is also obvious because of EXT4_INODE_INLINE_DATA flag. Distinguishing c) and d) however requires additional logic. This currently relies on i_blocks count. After subtracting external xattr block from i_blocks, if it is greater than 0 then we know that some data blocks exist, so there must be a block map. This logic got broken after ea_inode feature was added. That feature charges the data blocks of external xattr inodes to the referencing inode and so adds them to the i_blocks. To fix this, we could subtract ea_inode blocks by iterating through all xattr entries and then check whether remaining i_blocks count is zero. Besides being complicated, this won't change the fact that the current way of distinguishing between c) and d) is fragile. The alternative solution is to test whether i_size is less than 60 to determine fast symlink case. ext4_symlink() uses the same test to decide whether to store the symlink in i_data. There is one caveat to address before this can work though. If an inode's i_nlink is zero during eviction, its i_size is set to zero and its data is truncated. If system crashes before inode is removed from the orphan list, next boot orphan cleanup may find the inode with zero i_size. So, a symlink that had its data stored in a block may now appear to be a fast symlink. The solution used in this patch is to treat i_size = 0 as a non-fast symlink case. A zero sized symlink is not legal so the only time this can happen is the mentioned scenario. This is also logically correct because a i_size = 0 symlink has no data stored in i_data. Suggested-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca>
2017-07-04 12:11:21 +08:00
* A fast symlink has its symlink data stored in ext4_inode_info->i_data.
*/
int ext4_inode_is_fast_symlink(struct inode *inode)
{
if (!(EXT4_I(inode)->i_flags & EXT4_EA_INODE_FL)) {
int ea_blocks = EXT4_I(inode)->i_file_acl ?
EXT4_CLUSTER_SIZE(inode->i_sb) >> 9 : 0;
if (ext4_has_inline_data(inode))
return 0;
return (S_ISLNK(inode->i_mode) && inode->i_blocks - ea_blocks == 0);
}
ext4: change fast symlink test to not rely on i_blocks ext4_inode_info->i_data is the storage area for 4 types of data: a) Extents data b) Inline data c) Block map d) Fast symlink data (symlink length < 60) Extents data case is positively identified by EXT4_INODE_EXTENTS flag. Inline data case is also obvious because of EXT4_INODE_INLINE_DATA flag. Distinguishing c) and d) however requires additional logic. This currently relies on i_blocks count. After subtracting external xattr block from i_blocks, if it is greater than 0 then we know that some data blocks exist, so there must be a block map. This logic got broken after ea_inode feature was added. That feature charges the data blocks of external xattr inodes to the referencing inode and so adds them to the i_blocks. To fix this, we could subtract ea_inode blocks by iterating through all xattr entries and then check whether remaining i_blocks count is zero. Besides being complicated, this won't change the fact that the current way of distinguishing between c) and d) is fragile. The alternative solution is to test whether i_size is less than 60 to determine fast symlink case. ext4_symlink() uses the same test to decide whether to store the symlink in i_data. There is one caveat to address before this can work though. If an inode's i_nlink is zero during eviction, its i_size is set to zero and its data is truncated. If system crashes before inode is removed from the orphan list, next boot orphan cleanup may find the inode with zero i_size. So, a symlink that had its data stored in a block may now appear to be a fast symlink. The solution used in this patch is to treat i_size = 0 as a non-fast symlink case. A zero sized symlink is not legal so the only time this can happen is the mentioned scenario. This is also logically correct because a i_size = 0 symlink has no data stored in i_data. Suggested-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca>
2017-07-04 12:11:21 +08:00
return S_ISLNK(inode->i_mode) && inode->i_size &&
(inode->i_size < EXT4_N_BLOCKS * 4);
}
/*
* Called at the last iput() if i_nlink is zero.
*/
void ext4_evict_inode(struct inode *inode)
{
handle_t *handle;
int err;
/*
* Credits for final inode cleanup and freeing:
* sb + inode (ext4_orphan_del()), block bitmap, group descriptor
* (xattr block freeing), bitmap, group descriptor (inode freeing)
*/
int extra_credits = 6;
struct ext4_xattr_inode_array *ea_inode_array = NULL;
bool freeze_protected = false;
trace_ext4_evict_inode(inode);
ext4: call ext4_ioend_wait and ext4_flush_completed_IO in ext4_evict_inode Flush inode's i_completed_io_list before calling ext4_io_wait to prevent the following deadlock scenario: A page fault happens while some process is writing inode A. During page fault, shrink_icache_memory is called that in turn evicts another inode B. Inode B has some pending io_end work so it calls ext4_ioend_wait() that waits for inode B's i_ioend_count to become zero. However, inode B's ioend work was queued behind some of inode A's ioend work on the same cpu's ext4-dio-unwritten workqueue. As the ext4-dio-unwritten thread on that cpu is processing inode A's ioend work, it tries to grab inode A's i_mutex lock. Since the i_mutex lock of inode A is still hold before the page fault happened, we enter a deadlock. Also moves ext4_flush_completed_IO and ext4_ioend_wait from ext4_destroy_inode() to ext4_evict_inode(). During inode deleteion, ext4_evict_inode() is called before ext4_destroy_inode() and in ext4_evict_inode(), we may call ext4_truncate() without holding i_mutex lock. As a result, there is a race between flush_completed_IO that is called from ext4_ext_truncate() and ext4_end_io_work, which may cause corruption on an io_end structure. This change moves ext4_flush_completed_IO and ext4_ioend_wait from ext4_destroy_inode() to ext4_evict_inode() to resolve the race between ext4_truncate() and ext4_end_io_work during inode deletion. Signed-off-by: Jiaying Zhang <jiayingz@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
2011-08-14 00:17:13 +08:00
if (inode->i_nlink) {
/*
* When journalling data dirty buffers are tracked only in the
* journal. So although mm thinks everything is clean and
* ready for reaping the inode might still have some pages to
* write in the running transaction or waiting to be
* checkpointed. Thus calling jbd2_journal_invalidate_folio()
* (via truncate_inode_pages()) to discard these buffers can
* cause data loss. Also even if we did not discard these
* buffers, we would have no way to find them after the inode
* is reaped and thus user could see stale data if he tries to
* read them before the transaction is checkpointed. So be
* careful and force everything to disk here... We use
* ei->i_datasync_tid to store the newest transaction
* containing inode's data.
*
* Note that directories do not have this problem because they
* don't use page cache.
*/
if (inode->i_ino != EXT4_JOURNAL_INO &&
ext4_should_journal_data(inode) &&
S_ISREG(inode->i_mode) && inode->i_data.nrpages) {
journal_t *journal = EXT4_SB(inode->i_sb)->s_journal;
tid_t commit_tid = EXT4_I(inode)->i_datasync_tid;
jbd2_complete_transaction(journal, commit_tid);
filemap_write_and_wait(&inode->i_data);
}
mm + fs: store shadow entries in page cache Reclaim will be leaving shadow entries in the page cache radix tree upon evicting the real page. As those pages are found from the LRU, an iput() can lead to the inode being freed concurrently. At this point, reclaim must no longer install shadow pages because the inode freeing code needs to ensure the page tree is really empty. Add an address_space flag, AS_EXITING, that the inode freeing code sets under the tree lock before doing the final truncate. Reclaim will check for this flag before installing shadow pages. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:49 +08:00
truncate_inode_pages_final(&inode->i_data);
goto no_delete;
}
if (is_bad_inode(inode))
goto no_delete;
dquot_initialize(inode);
if (ext4_should_order_data(inode))
ext4_begin_ordered_truncate(inode, 0);
mm + fs: store shadow entries in page cache Reclaim will be leaving shadow entries in the page cache radix tree upon evicting the real page. As those pages are found from the LRU, an iput() can lead to the inode being freed concurrently. At this point, reclaim must no longer install shadow pages because the inode freeing code needs to ensure the page tree is really empty. Add an address_space flag, AS_EXITING, that the inode freeing code sets under the tree lock before doing the final truncate. Reclaim will check for this flag before installing shadow pages. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:49 +08:00
truncate_inode_pages_final(&inode->i_data);
/*
* For inodes with journalled data, transaction commit could have
* dirtied the inode. Flush worker is ignoring it because of I_FREEING
* flag but we still need to remove the inode from the writeback lists.
*/
if (!list_empty_careful(&inode->i_io_list)) {
WARN_ON_ONCE(!ext4_should_journal_data(inode));
inode_io_list_del(inode);
}
/*
* Protect us against freezing - iput() caller didn't have to have any
* protection against it. When we are in a running transaction though,
* we are already protected against freezing and we cannot grab further
* protection due to lock ordering constraints.
*/
if (!ext4_journal_current_handle()) {
sb_start_intwrite(inode->i_sb);
freeze_protected = true;
}
ext4: xattr-in-inode support Large xattr support is implemented for EXT4_FEATURE_INCOMPAT_EA_INODE. If the size of an xattr value is larger than will fit in a single external block, then the xattr value will be saved into the body of an external xattr inode. The also helps support a larger number of xattr, since only the headers will be stored in the in-inode space or the single external block. The inode is referenced from the xattr header via "e_value_inum", which was formerly "e_value_block", but that field was never used. The e_value_size still contains the xattr size so that listing xattrs does not need to look up the inode if the data is not accessed. struct ext4_xattr_entry { __u8 e_name_len; /* length of name */ __u8 e_name_index; /* attribute name index */ __le16 e_value_offs; /* offset in disk block of value */ __le32 e_value_inum; /* inode in which value is stored */ __le32 e_value_size; /* size of attribute value */ __le32 e_hash; /* hash value of name and value */ char e_name[0]; /* attribute name */ }; The xattr inode is marked with the EXT4_EA_INODE_FL flag and also holds a back-reference to the owning inode in its i_mtime field, allowing the ext4/e2fsck to verify the correct inode is accessed. [ Applied fix by Dan Carpenter to avoid freeing an ERR_PTR. ] Lustre-Jira: https://jira.hpdd.intel.com/browse/LU-80 Lustre-bugzilla: https://bugzilla.lustre.org/show_bug.cgi?id=4424 Signed-off-by: Kalpak Shah <kalpak.shah@sun.com> Signed-off-by: James Simmons <uja.ornl@gmail.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
2017-06-22 09:10:32 +08:00
if (!IS_NOQUOTA(inode))
extra_credits += EXT4_MAXQUOTAS_DEL_BLOCKS(inode->i_sb);
/*
* Block bitmap, group descriptor, and inode are accounted in both
* ext4_blocks_for_truncate() and extra_credits. So subtract 3.
*/
handle = ext4_journal_start(inode, EXT4_HT_TRUNCATE,
ext4_blocks_for_truncate(inode) + extra_credits - 3);
if (IS_ERR(handle)) {
ext4_std_error(inode->i_sb, PTR_ERR(handle));
/*
* If we're going to skip the normal cleanup, we still need to
* make sure that the in-core orphan linked list is properly
* cleaned up.
*/
ext4_orphan_del(NULL, inode);
if (freeze_protected)
sb_end_intwrite(inode->i_sb);
goto no_delete;
}
if (IS_SYNC(inode))
ext4_handle_sync(handle);
ext4: change fast symlink test to not rely on i_blocks ext4_inode_info->i_data is the storage area for 4 types of data: a) Extents data b) Inline data c) Block map d) Fast symlink data (symlink length < 60) Extents data case is positively identified by EXT4_INODE_EXTENTS flag. Inline data case is also obvious because of EXT4_INODE_INLINE_DATA flag. Distinguishing c) and d) however requires additional logic. This currently relies on i_blocks count. After subtracting external xattr block from i_blocks, if it is greater than 0 then we know that some data blocks exist, so there must be a block map. This logic got broken after ea_inode feature was added. That feature charges the data blocks of external xattr inodes to the referencing inode and so adds them to the i_blocks. To fix this, we could subtract ea_inode blocks by iterating through all xattr entries and then check whether remaining i_blocks count is zero. Besides being complicated, this won't change the fact that the current way of distinguishing between c) and d) is fragile. The alternative solution is to test whether i_size is less than 60 to determine fast symlink case. ext4_symlink() uses the same test to decide whether to store the symlink in i_data. There is one caveat to address before this can work though. If an inode's i_nlink is zero during eviction, its i_size is set to zero and its data is truncated. If system crashes before inode is removed from the orphan list, next boot orphan cleanup may find the inode with zero i_size. So, a symlink that had its data stored in a block may now appear to be a fast symlink. The solution used in this patch is to treat i_size = 0 as a non-fast symlink case. A zero sized symlink is not legal so the only time this can happen is the mentioned scenario. This is also logically correct because a i_size = 0 symlink has no data stored in i_data. Suggested-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca>
2017-07-04 12:11:21 +08:00
/*
* Set inode->i_size to 0 before calling ext4_truncate(). We need
* special handling of symlinks here because i_size is used to
* determine whether ext4_inode_info->i_data contains symlink data or
* block mappings. Setting i_size to 0 will remove its fast symlink
* status. Erase i_data so that it becomes a valid empty block map.
*/
if (ext4_inode_is_fast_symlink(inode))
memset(EXT4_I(inode)->i_data, 0, sizeof(EXT4_I(inode)->i_data));
inode->i_size = 0;
err = ext4_mark_inode_dirty(handle, inode);
if (err) {
ext4_warning(inode->i_sb,
"couldn't mark inode dirty (err %d)", err);
goto stop_handle;
}
if (inode->i_blocks) {
err = ext4_truncate(inode);
if (err) {
ext4_error_err(inode->i_sb, -err,
"couldn't truncate inode %lu (err %d)",
inode->i_ino, err);
goto stop_handle;
}
}
/* Remove xattr references. */
err = ext4_xattr_delete_inode(handle, inode, &ea_inode_array,
extra_credits);
if (err) {
ext4_warning(inode->i_sb, "xattr delete (err %d)", err);
stop_handle:
ext4_journal_stop(handle);
ext4_orphan_del(NULL, inode);
if (freeze_protected)
sb_end_intwrite(inode->i_sb);
ext4_xattr_inode_array_free(ea_inode_array);
goto no_delete;
}
/*
* Kill off the orphan record which ext4_truncate created.
* AKPM: I think this can be inside the above `if'.
* Note that ext4_orphan_del() has to be able to cope with the
* deletion of a non-existent orphan - this is because we don't
* know if ext4_truncate() actually created an orphan record.
* (Well, we could do this if we need to, but heck - it works)
*/
ext4_orphan_del(handle, inode);
EXT4_I(inode)->i_dtime = (__u32)ktime_get_real_seconds();
/*
* One subtle ordering requirement: if anything has gone wrong
* (transaction abort, IO errors, whatever), then we can still
* do these next steps (the fs will already have been marked as
* having errors), but we can't free the inode if the mark_dirty
* fails.
*/
if (ext4_mark_inode_dirty(handle, inode))
/* If that failed, just do the required in-core inode clear. */
ext4_clear_inode(inode);
else
ext4_free_inode(handle, inode);
ext4_journal_stop(handle);
if (freeze_protected)
sb_end_intwrite(inode->i_sb);
ext4_xattr_inode_array_free(ea_inode_array);
return;
no_delete:
if (!list_empty(&EXT4_I(inode)->i_fc_list))
ext4_fc_mark_ineligible(inode->i_sb, EXT4_FC_REASON_NOMEM, NULL);
ext4_clear_inode(inode); /* We must guarantee clearing of inode... */
}
#ifdef CONFIG_QUOTA
qsize_t *ext4_get_reserved_space(struct inode *inode)
{
return &EXT4_I(inode)->i_reserved_quota;
}
#endif
/*
* Called with i_data_sem down, which is important since we can call
* ext4_discard_preallocations() from here.
*/
void ext4_da_update_reserve_space(struct inode *inode,
int used, int quota_claim)
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
struct ext4_inode_info *ei = EXT4_I(inode);
spin_lock(&ei->i_block_reservation_lock);
trace_ext4_da_update_reserve_space(inode, used, quota_claim);
if (unlikely(used > ei->i_reserved_data_blocks)) {
ext4_warning(inode->i_sb, "%s: ino %lu, used %d "
"with only %d reserved data blocks",
__func__, inode->i_ino, used,
ei->i_reserved_data_blocks);
WARN_ON(1);
used = ei->i_reserved_data_blocks;
}
/* Update per-inode reservations */
ei->i_reserved_data_blocks -= used;
percpu_counter_sub(&sbi->s_dirtyclusters_counter, used);
spin_unlock(&ei->i_block_reservation_lock);
/* Update quota subsystem for data blocks */
if (quota_claim)
dquot_claim_block(inode, EXT4_C2B(sbi, used));
else {
/*
* We did fallocate with an offset that is already delayed
* allocated. So on delayed allocated writeback we should
* not re-claim the quota for fallocated blocks.
*/
dquot_release_reservation_block(inode, EXT4_C2B(sbi, used));
}
/*
* If we have done all the pending block allocations and if
* there aren't any writers on the inode, we can discard the
* inode's preallocations.
*/
if ((ei->i_reserved_data_blocks == 0) &&
!inode_is_open_for_write(inode))
ext4_discard_preallocations(inode, 0);
}
static int __check_block_validity(struct inode *inode, const char *func,
unsigned int line,
struct ext4_map_blocks *map)
{
if (ext4_has_feature_journal(inode->i_sb) &&
(inode->i_ino ==
le32_to_cpu(EXT4_SB(inode->i_sb)->s_es->s_journal_inum)))
return 0;
2020-07-28 21:04:34 +08:00
if (!ext4_inode_block_valid(inode, map->m_pblk, map->m_len)) {
ext4_error_inode(inode, func, line, map->m_pblk,
"lblock %lu mapped to illegal pblock %llu "
"(length %d)", (unsigned long) map->m_lblk,
map->m_pblk, map->m_len);
return -EFSCORRUPTED;
}
return 0;
}
int ext4_issue_zeroout(struct inode *inode, ext4_lblk_t lblk, ext4_fsblk_t pblk,
ext4_lblk_t len)
{
int ret;
if (IS_ENCRYPTED(inode) && S_ISREG(inode->i_mode))
return fscrypt_zeroout_range(inode, lblk, pblk, len);
ret = sb_issue_zeroout(inode->i_sb, pblk, len, GFP_NOFS);
if (ret > 0)
ret = 0;
return ret;
}
#define check_block_validity(inode, map) \
__check_block_validity((inode), __func__, __LINE__, (map))
#ifdef ES_AGGRESSIVE_TEST
static void ext4_map_blocks_es_recheck(handle_t *handle,
struct inode *inode,
struct ext4_map_blocks *es_map,
struct ext4_map_blocks *map,
int flags)
{
int retval;
map->m_flags = 0;
/*
* There is a race window that the result is not the same.
* e.g. xfstests #223 when dioread_nolock enables. The reason
* is that we lookup a block mapping in extent status tree with
* out taking i_data_sem. So at the time the unwritten extent
* could be converted.
*/
down_read(&EXT4_I(inode)->i_data_sem);
if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) {
retval = ext4_ext_map_blocks(handle, inode, map, 0);
} else {
retval = ext4_ind_map_blocks(handle, inode, map, 0);
}
up_read((&EXT4_I(inode)->i_data_sem));
/*
* We don't check m_len because extent will be collpased in status
* tree. So the m_len might not equal.
*/
if (es_map->m_lblk != map->m_lblk ||
es_map->m_flags != map->m_flags ||
es_map->m_pblk != map->m_pblk) {
printk("ES cache assertion failed for inode: %lu "
"es_cached ex [%d/%d/%llu/%x] != "
"found ex [%d/%d/%llu/%x] retval %d flags %x\n",
inode->i_ino, es_map->m_lblk, es_map->m_len,
es_map->m_pblk, es_map->m_flags, map->m_lblk,
map->m_len, map->m_pblk, map->m_flags,
retval, flags);
}
}
#endif /* ES_AGGRESSIVE_TEST */
/*
* The ext4_map_blocks() function tries to look up the requested blocks,
* and returns if the blocks are already mapped.
*
* Otherwise it takes the write lock of the i_data_sem and allocate blocks
* and store the allocated blocks in the result buffer head and mark it
* mapped.
*
* If file type is extents based, it will call ext4_ext_map_blocks(),
* Otherwise, call with ext4_ind_map_blocks() to handle indirect mapping
* based files
*
* On success, it returns the number of blocks being mapped or allocated. if
* create==0 and the blocks are pre-allocated and unwritten, the resulting @map
* is marked as unwritten. If the create == 1, it will mark @map as mapped.
*
* It returns 0 if plain look up failed (blocks have not been allocated), in
* that case, @map is returned as unmapped but we still do fill map->m_len to
* indicate the length of a hole starting at map->m_lblk.
*
* It returns the error in case of allocation failure.
*/
int ext4_map_blocks(handle_t *handle, struct inode *inode,
struct ext4_map_blocks *map, int flags)
{
struct extent_status es;
int retval;
int ret = 0;
#ifdef ES_AGGRESSIVE_TEST
struct ext4_map_blocks orig_map;
memcpy(&orig_map, map, sizeof(*map));
#endif
map->m_flags = 0;
ext_debug(inode, "flag 0x%x, max_blocks %u, logical block %lu\n",
flags, map->m_len, (unsigned long) map->m_lblk);
ext4: avoid possible overflow in ext4_map_blocks() The ext4_map_blocks() function returns the number of blocks which satisfying the caller's request. This number of blocks requested by the caller is specified by an unsigned integer, but the return value of ext4_map_blocks() is a signed integer (to accomodate error codes per the kernel's standard error signalling convention). Historically, overflows could never happen since mballoc() will refuse to allocate more than 2048 blocks at a time (which is something we should fix), and if the blocks were already allocated, the fact that there would be some number of intervening metadata blocks pretty much guaranteed that there could never be a contiguous region of data blocks that was greater than 2**31 blocks. However, this is now possible if there is a file system which is a bit bigger than 8TB, and is created using the new mke2fs hugeblock feature, which can create a perfectly contiguous file. In that case, if a userspace program attempted to call fallocate() on this already fully allocated file, it's possible that ext4_map_blocks() could return a number large enough that it would overflow a signed integer, resulting in a ext4 thinking that the ext4_map_blocks() call had failed with some strange error code. Since ext4_map_blocks() is always free to return a smaller number of blocks than what was requested by the caller, fix this by capping the number of blocks that ext4_map_blocks() will ever try to map to 2**31 - 1. In practice this should never get hit, except by someone deliberately trying to provke the above-described bug. Thanks to the PaX team for asking whethre this could possibly happen in some off-line discussions about using some static code checking technology they are developing to find bugs in kernel code. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-02-21 01:54:05 +08:00
/*
* ext4_map_blocks returns an int, and m_len is an unsigned int
*/
if (unlikely(map->m_len > INT_MAX))
map->m_len = INT_MAX;
/* We can handle the block number less than EXT_MAX_BLOCKS */
if (unlikely(map->m_lblk >= EXT_MAX_BLOCKS))
return -EFSCORRUPTED;
/* Lookup extent status tree firstly */
if (!(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_FC_REPLAY) &&
ext4_es_lookup_extent(inode, map->m_lblk, NULL, &es)) {
if (ext4_es_is_written(&es) || ext4_es_is_unwritten(&es)) {
map->m_pblk = ext4_es_pblock(&es) +
map->m_lblk - es.es_lblk;
map->m_flags |= ext4_es_is_written(&es) ?
EXT4_MAP_MAPPED : EXT4_MAP_UNWRITTEN;
retval = es.es_len - (map->m_lblk - es.es_lblk);
if (retval > map->m_len)
retval = map->m_len;
map->m_len = retval;
} else if (ext4_es_is_delayed(&es) || ext4_es_is_hole(&es)) {
map->m_pblk = 0;
retval = es.es_len - (map->m_lblk - es.es_lblk);
if (retval > map->m_len)
retval = map->m_len;
map->m_len = retval;
retval = 0;
} else {
BUG();
}
if (flags & EXT4_GET_BLOCKS_CACHED_NOWAIT)
return retval;
#ifdef ES_AGGRESSIVE_TEST
ext4_map_blocks_es_recheck(handle, inode, map,
&orig_map, flags);
#endif
goto found;
}
/*
* In the query cache no-wait mode, nothing we can do more if we
* cannot find extent in the cache.
*/
if (flags & EXT4_GET_BLOCKS_CACHED_NOWAIT)
return 0;
/*
* Try to see if we can get the block without requesting a new
* file system block.
*/
down_read(&EXT4_I(inode)->i_data_sem);
if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) {
retval = ext4_ext_map_blocks(handle, inode, map, 0);
} else {
retval = ext4_ind_map_blocks(handle, inode, map, 0);
}
if (retval > 0) {
unsigned int status;
if (unlikely(retval != map->m_len)) {
ext4_warning(inode->i_sb,
"ES len assertion failed for inode "
"%lu: retval %d != map->m_len %d",
inode->i_ino, retval, map->m_len);
WARN_ON(1);
}
status = map->m_flags & EXT4_MAP_UNWRITTEN ?
EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN;
if (!(flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) &&
ext4: fix data corruption caused by unwritten and delayed extents Currently it is possible to lose whole file system block worth of data when we hit the specific interaction with unwritten and delayed extents in status extent tree. The problem is that when we insert delayed extent into extent status tree the only way to get rid of it is when we write out delayed buffer. However there is a limitation in the extent status tree implementation so that when inserting unwritten extent should there be even a single delayed block the whole unwritten extent would be marked as delayed. At this point, there is no way to get rid of the delayed extents, because there are no delayed buffers to write out. So when a we write into said unwritten extent we will convert it to written, but it still remains delayed. When we try to write into that block later ext4_da_map_blocks() will set the buffer new and delayed and map it to invalid block which causes the rest of the block to be zeroed loosing already written data. For now we can fix this by simply not allowing to set delayed status on written extent in the extent status tree. Also add WARN_ON() to make sure that we notice if this happens in the future. This problem can be easily reproduced by running the following xfs_io. xfs_io -f -c "pwrite -S 0xaa 4096 2048" \ -c "falloc 0 131072" \ -c "pwrite -S 0xbb 65536 2048" \ -c "fsync" /mnt/test/fff echo 3 > /proc/sys/vm/drop_caches xfs_io -c "pwrite -S 0xdd 67584 2048" /mnt/test/fff This can be theoretically also reproduced by at random by running fsx, but it's not very reliable, though on machines with bigger page size (like ppc) this can be seen more often (especially xfstest generic/127) Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2015-05-03 09:36:55 +08:00
!(status & EXTENT_STATUS_WRITTEN) &&
ext4_es_scan_range(inode, &ext4_es_is_delayed, map->m_lblk,
map->m_lblk + map->m_len - 1))
status |= EXTENT_STATUS_DELAYED;
ret = ext4_es_insert_extent(inode, map->m_lblk,
map->m_len, map->m_pblk, status);
if (ret < 0)
retval = ret;
}
up_read((&EXT4_I(inode)->i_data_sem));
found:
if (retval > 0 && map->m_flags & EXT4_MAP_MAPPED) {
ret = check_block_validity(inode, map);
if (ret != 0)
return ret;
}
/* If it is only a block(s) look up */
if ((flags & EXT4_GET_BLOCKS_CREATE) == 0)
return retval;
/*
* Returns if the blocks have already allocated
*
* Note that if blocks have been preallocated
* ext4_ext_get_block() returns the create = 0
* with buffer head unmapped.
*/
if (retval > 0 && map->m_flags & EXT4_MAP_MAPPED)
/*
* If we need to convert extent to unwritten
* we continue and do the actual work in
* ext4_ext_map_blocks()
*/
if (!(flags & EXT4_GET_BLOCKS_CONVERT_UNWRITTEN))
return retval;
/*
* Here we clear m_flags because after allocating an new extent,
* it will be set again.
*/
map->m_flags &= ~EXT4_MAP_FLAGS;
/*
* New blocks allocate and/or writing to unwritten extent
* will possibly result in updating i_data, so we take
* the write lock of i_data_sem, and call get_block()
* with create == 1 flag.
*/
down_write(&EXT4_I(inode)->i_data_sem);
/*
* We need to check for EXT4 here because migrate
* could have changed the inode type in between
*/
if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) {
retval = ext4_ext_map_blocks(handle, inode, map, flags);
} else {
retval = ext4_ind_map_blocks(handle, inode, map, flags);
if (retval > 0 && map->m_flags & EXT4_MAP_NEW) {
/*
* We allocated new blocks which will result in
* i_data's format changing. Force the migrate
* to fail by clearing migrate flags
*/
ext4_clear_inode_state(inode, EXT4_STATE_EXT_MIGRATE);
}
/*
* Update reserved blocks/metadata blocks after successful
* block allocation which had been deferred till now. We don't
* support fallocate for non extent files. So we can update
* reserve space here.
*/
if ((retval > 0) &&
(flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE))
ext4_da_update_reserve_space(inode, retval, 1);
}
if (retval > 0) {
unsigned int status;
if (unlikely(retval != map->m_len)) {
ext4_warning(inode->i_sb,
"ES len assertion failed for inode "
"%lu: retval %d != map->m_len %d",
inode->i_ino, retval, map->m_len);
WARN_ON(1);
}
/*
* We have to zeroout blocks before inserting them into extent
* status tree. Otherwise someone could look them up there and
* use them before they are really zeroed. We also have to
* unmap metadata before zeroing as otherwise writeback can
* overwrite zeros with stale data from block device.
*/
if (flags & EXT4_GET_BLOCKS_ZERO &&
map->m_flags & EXT4_MAP_MAPPED &&
map->m_flags & EXT4_MAP_NEW) {
ret = ext4_issue_zeroout(inode, map->m_lblk,
map->m_pblk, map->m_len);
if (ret) {
retval = ret;
goto out_sem;
}
}
/*
* If the extent has been zeroed out, we don't need to update
* extent status tree.
*/
if ((flags & EXT4_GET_BLOCKS_PRE_IO) &&
ext4_es_lookup_extent(inode, map->m_lblk, NULL, &es)) {
if (ext4_es_is_written(&es))
goto out_sem;
}
status = map->m_flags & EXT4_MAP_UNWRITTEN ?
EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN;
if (!(flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) &&
ext4: fix data corruption caused by unwritten and delayed extents Currently it is possible to lose whole file system block worth of data when we hit the specific interaction with unwritten and delayed extents in status extent tree. The problem is that when we insert delayed extent into extent status tree the only way to get rid of it is when we write out delayed buffer. However there is a limitation in the extent status tree implementation so that when inserting unwritten extent should there be even a single delayed block the whole unwritten extent would be marked as delayed. At this point, there is no way to get rid of the delayed extents, because there are no delayed buffers to write out. So when a we write into said unwritten extent we will convert it to written, but it still remains delayed. When we try to write into that block later ext4_da_map_blocks() will set the buffer new and delayed and map it to invalid block which causes the rest of the block to be zeroed loosing already written data. For now we can fix this by simply not allowing to set delayed status on written extent in the extent status tree. Also add WARN_ON() to make sure that we notice if this happens in the future. This problem can be easily reproduced by running the following xfs_io. xfs_io -f -c "pwrite -S 0xaa 4096 2048" \ -c "falloc 0 131072" \ -c "pwrite -S 0xbb 65536 2048" \ -c "fsync" /mnt/test/fff echo 3 > /proc/sys/vm/drop_caches xfs_io -c "pwrite -S 0xdd 67584 2048" /mnt/test/fff This can be theoretically also reproduced by at random by running fsx, but it's not very reliable, though on machines with bigger page size (like ppc) this can be seen more often (especially xfstest generic/127) Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2015-05-03 09:36:55 +08:00
!(status & EXTENT_STATUS_WRITTEN) &&
ext4_es_scan_range(inode, &ext4_es_is_delayed, map->m_lblk,
map->m_lblk + map->m_len - 1))
status |= EXTENT_STATUS_DELAYED;
ret = ext4_es_insert_extent(inode, map->m_lblk, map->m_len,
map->m_pblk, status);
if (ret < 0) {
retval = ret;
goto out_sem;
}
ext4: attempt to fix race in bigalloc code path Currently, there exists a race between delayed allocated writes and the writeback when bigalloc feature is in use. The race was because we wanted to determine what blocks in a cluster are under delayed allocation and we were using buffer_delayed(bh) check for it. But, the writeback codepath clears this bit without any synchronization which resulted in a race and an ext4 warning similar to: EXT4-fs (ram1): ext4_da_update_reserve_space: ino 13, used 1 with only 0 reserved data blocks The race existed in two places. (1) between ext4_find_delalloc_range() and ext4_map_blocks() when called from writeback code path. (2) between ext4_find_delalloc_range() and ext4_da_get_block_prep() (where buffer_delayed(bh) is set. To fix (1), this patch introduces a new buffer_head state bit - BH_Da_Mapped. This bit is set under the protection of EXT4_I(inode)->i_data_sem when we have actually mapped the delayed allocated blocks during the writeout time. We can now reliably check for this bit inside ext4_find_delalloc_range() to determine whether the reservation for the blocks have already been claimed or not. To fix (2), it was necessary to set buffer_delay(bh) under the protection of i_data_sem. So, I extracted the very beginning of ext4_map_blocks into a new function - ext4_da_map_blocks() - and performed the required setting of bh_delay bit and the quota reservation under the protection of i_data_sem. These two fixes makes the checking of buffer_delay(bh) and buffer_da_mapped(bh) consistent, thus removing the race. Tested: I was able to reproduce the problem by running 'dd' and 'fsync' in parallel. Also, xfstests sometimes used to reproduce this race. After the fix both my test and xfstests were successful and no race (warning message) was observed. Google-Bug-Id: 4997027 Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-10 07:20:51 +08:00
}
out_sem:
up_write((&EXT4_I(inode)->i_data_sem));
if (retval > 0 && map->m_flags & EXT4_MAP_MAPPED) {
ret = check_block_validity(inode, map);
if (ret != 0)
return ret;
ext4: fix data exposure after a crash Huang has reported that in his powerfail testing he is seeing stale block contents in some of recently allocated blocks although he mounts ext4 in data=ordered mode. After some investigation I have found out that indeed when delayed allocation is used, we don't add inode to transaction's list of inodes needing flushing before commit. Originally we were doing that but commit f3b59291a69d removed the logic with a flawed argument that it is not needed. The problem is that although for delayed allocated blocks we write their contents immediately after allocating them, there is no guarantee that the IO scheduler or device doesn't reorder things and thus transaction allocating blocks and attaching them to inode can reach stable storage before actual block contents. Actually whenever we attach freshly allocated blocks to inode using a written extent, we should add inode to transaction's ordered inode list to make sure we properly wait for block contents to be written before committing the transaction. So that is what we do in this patch. This also handles other cases where stale data exposure was possible - like filling hole via mmap in data=ordered,nodelalloc mode. The only exception to the above rule are extending direct IO writes where blkdev_direct_IO() waits for IO to complete before increasing i_size and thus stale data exposure is not possible. For now we don't complicate the code with optimizing this special case since the overhead is pretty low. In case this is observed to be a performance problem we can always handle it using a special flag to ext4_map_blocks(). CC: stable@vger.kernel.org Fixes: f3b59291a69d0b734be1fc8be489fef2dd846d3d Reported-by: "HUANG Weller (CM/ESW12-CN)" <Weller.Huang@cn.bosch.com> Tested-by: "HUANG Weller (CM/ESW12-CN)" <Weller.Huang@cn.bosch.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-04-24 12:56:03 +08:00
/*
* Inodes with freshly allocated blocks where contents will be
* visible after transaction commit must be on transaction's
* ordered data list.
*/
if (map->m_flags & EXT4_MAP_NEW &&
!(map->m_flags & EXT4_MAP_UNWRITTEN) &&
!(flags & EXT4_GET_BLOCKS_ZERO) &&
!ext4_is_quota_file(inode) &&
ext4: fix data exposure after a crash Huang has reported that in his powerfail testing he is seeing stale block contents in some of recently allocated blocks although he mounts ext4 in data=ordered mode. After some investigation I have found out that indeed when delayed allocation is used, we don't add inode to transaction's list of inodes needing flushing before commit. Originally we were doing that but commit f3b59291a69d removed the logic with a flawed argument that it is not needed. The problem is that although for delayed allocated blocks we write their contents immediately after allocating them, there is no guarantee that the IO scheduler or device doesn't reorder things and thus transaction allocating blocks and attaching them to inode can reach stable storage before actual block contents. Actually whenever we attach freshly allocated blocks to inode using a written extent, we should add inode to transaction's ordered inode list to make sure we properly wait for block contents to be written before committing the transaction. So that is what we do in this patch. This also handles other cases where stale data exposure was possible - like filling hole via mmap in data=ordered,nodelalloc mode. The only exception to the above rule are extending direct IO writes where blkdev_direct_IO() waits for IO to complete before increasing i_size and thus stale data exposure is not possible. For now we don't complicate the code with optimizing this special case since the overhead is pretty low. In case this is observed to be a performance problem we can always handle it using a special flag to ext4_map_blocks(). CC: stable@vger.kernel.org Fixes: f3b59291a69d0b734be1fc8be489fef2dd846d3d Reported-by: "HUANG Weller (CM/ESW12-CN)" <Weller.Huang@cn.bosch.com> Tested-by: "HUANG Weller (CM/ESW12-CN)" <Weller.Huang@cn.bosch.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-04-24 12:56:03 +08:00
ext4_should_order_data(inode)) {
loff_t start_byte =
(loff_t)map->m_lblk << inode->i_blkbits;
loff_t length = (loff_t)map->m_len << inode->i_blkbits;
if (flags & EXT4_GET_BLOCKS_IO_SUBMIT)
ret = ext4_jbd2_inode_add_wait(handle, inode,
start_byte, length);
else
ret = ext4_jbd2_inode_add_write(handle, inode,
start_byte, length);
ext4: fix data exposure after a crash Huang has reported that in his powerfail testing he is seeing stale block contents in some of recently allocated blocks although he mounts ext4 in data=ordered mode. After some investigation I have found out that indeed when delayed allocation is used, we don't add inode to transaction's list of inodes needing flushing before commit. Originally we were doing that but commit f3b59291a69d removed the logic with a flawed argument that it is not needed. The problem is that although for delayed allocated blocks we write their contents immediately after allocating them, there is no guarantee that the IO scheduler or device doesn't reorder things and thus transaction allocating blocks and attaching them to inode can reach stable storage before actual block contents. Actually whenever we attach freshly allocated blocks to inode using a written extent, we should add inode to transaction's ordered inode list to make sure we properly wait for block contents to be written before committing the transaction. So that is what we do in this patch. This also handles other cases where stale data exposure was possible - like filling hole via mmap in data=ordered,nodelalloc mode. The only exception to the above rule are extending direct IO writes where blkdev_direct_IO() waits for IO to complete before increasing i_size and thus stale data exposure is not possible. For now we don't complicate the code with optimizing this special case since the overhead is pretty low. In case this is observed to be a performance problem we can always handle it using a special flag to ext4_map_blocks(). CC: stable@vger.kernel.org Fixes: f3b59291a69d0b734be1fc8be489fef2dd846d3d Reported-by: "HUANG Weller (CM/ESW12-CN)" <Weller.Huang@cn.bosch.com> Tested-by: "HUANG Weller (CM/ESW12-CN)" <Weller.Huang@cn.bosch.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-04-24 12:56:03 +08:00
if (ret)
return ret;
}
}
if (retval > 0 && (map->m_flags & EXT4_MAP_UNWRITTEN ||
map->m_flags & EXT4_MAP_MAPPED))
ext4_fc_track_range(handle, inode, map->m_lblk,
map->m_lblk + map->m_len - 1);
if (retval < 0)
ext_debug(inode, "failed with err %d\n", retval);
return retval;
}
/*
* Update EXT4_MAP_FLAGS in bh->b_state. For buffer heads attached to pages
* we have to be careful as someone else may be manipulating b_state as well.
*/
static void ext4_update_bh_state(struct buffer_head *bh, unsigned long flags)
{
unsigned long old_state;
unsigned long new_state;
flags &= EXT4_MAP_FLAGS;
/* Dummy buffer_head? Set non-atomically. */
if (!bh->b_page) {
bh->b_state = (bh->b_state & ~EXT4_MAP_FLAGS) | flags;
return;
}
/*
* Someone else may be modifying b_state. Be careful! This is ugly but
* once we get rid of using bh as a container for mapping information
* to pass to / from get_block functions, this can go away.
*/
do {
old_state = READ_ONCE(bh->b_state);
new_state = (old_state & ~EXT4_MAP_FLAGS) | flags;
} while (unlikely(
cmpxchg(&bh->b_state, old_state, new_state) != old_state));
}
static int _ext4_get_block(struct inode *inode, sector_t iblock,
struct buffer_head *bh, int flags)
{
struct ext4_map_blocks map;
int ret = 0;
if (ext4_has_inline_data(inode))
return -ERANGE;
map.m_lblk = iblock;
map.m_len = bh->b_size >> inode->i_blkbits;
ret = ext4_map_blocks(ext4_journal_current_handle(), inode, &map,
flags);
if (ret > 0) {
map_bh(bh, inode->i_sb, map.m_pblk);
ext4_update_bh_state(bh, map.m_flags);
bh->b_size = inode->i_sb->s_blocksize * map.m_len;
ret = 0;
} else if (ret == 0) {
/* hole case, need to fill in bh->b_size */
bh->b_size = inode->i_sb->s_blocksize * map.m_len;
}
return ret;
}
int ext4_get_block(struct inode *inode, sector_t iblock,
struct buffer_head *bh, int create)
{
return _ext4_get_block(inode, iblock, bh,
create ? EXT4_GET_BLOCKS_CREATE : 0);
}
/*
* Get block function used when preparing for buffered write if we require
* creating an unwritten extent if blocks haven't been allocated. The extent
* will be converted to written after the IO is complete.
*/
int ext4_get_block_unwritten(struct inode *inode, sector_t iblock,
struct buffer_head *bh_result, int create)
{
ext4_debug("ext4_get_block_unwritten: inode %lu, create flag %d\n",
inode->i_ino, create);
return _ext4_get_block(inode, iblock, bh_result,
EXT4_GET_BLOCKS_CREATE_UNWRIT_EXT);
}
/* Maximum number of blocks we map for direct IO at once. */
#define DIO_MAX_BLOCKS 4096
/*
* `handle' can be NULL if create is zero
*/
struct buffer_head *ext4_getblk(handle_t *handle, struct inode *inode,
ext4_lblk_t block, int map_flags)
{
struct ext4_map_blocks map;
struct buffer_head *bh;
int create = map_flags & EXT4_GET_BLOCKS_CREATE;
bool nowait = map_flags & EXT4_GET_BLOCKS_CACHED_NOWAIT;
int err;
ASSERT((EXT4_SB(inode->i_sb)->s_mount_state & EXT4_FC_REPLAY)
|| handle != NULL || create == 0);
ASSERT(create == 0 || !nowait);
map.m_lblk = block;
map.m_len = 1;
err = ext4_map_blocks(handle, inode, &map, map_flags);
if (err == 0)
return create ? ERR_PTR(-ENOSPC) : NULL;
if (err < 0)
return ERR_PTR(err);
if (nowait)
return sb_find_get_block(inode->i_sb, map.m_pblk);
bh = sb_getblk(inode->i_sb, map.m_pblk);
if (unlikely(!bh))
return ERR_PTR(-ENOMEM);
if (map.m_flags & EXT4_MAP_NEW) {
ASSERT(create != 0);
ASSERT((EXT4_SB(inode->i_sb)->s_mount_state & EXT4_FC_REPLAY)
|| (handle != NULL));
/*
* Now that we do not always journal data, we should
* keep in mind whether this should always journal the
* new buffer as metadata. For now, regular file
* writes use ext4_get_block instead, so it's not a
* problem.
*/
lock_buffer(bh);
BUFFER_TRACE(bh, "call get_create_access");
err = ext4_journal_get_create_access(handle, inode->i_sb, bh,
EXT4_JTR_NONE);
if (unlikely(err)) {
unlock_buffer(bh);
goto errout;
}
if (!buffer_uptodate(bh)) {
memset(bh->b_data, 0, inode->i_sb->s_blocksize);
set_buffer_uptodate(bh);
}
unlock_buffer(bh);
BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata");
err = ext4_handle_dirty_metadata(handle, inode, bh);
if (unlikely(err))
goto errout;
} else
BUFFER_TRACE(bh, "not a new buffer");
return bh;
errout:
brelse(bh);
return ERR_PTR(err);
}
struct buffer_head *ext4_bread(handle_t *handle, struct inode *inode,
ext4_lblk_t block, int map_flags)
{
struct buffer_head *bh;
int ret;
bh = ext4_getblk(handle, inode, block, map_flags);
if (IS_ERR(bh))
return bh;
if (!bh || ext4_buffer_uptodate(bh))
return bh;
ret = ext4_read_bh_lock(bh, REQ_META | REQ_PRIO, true);
if (ret) {
put_bh(bh);
return ERR_PTR(ret);
}
return bh;
}
/* Read a contiguous batch of blocks. */
int ext4_bread_batch(struct inode *inode, ext4_lblk_t block, int bh_count,
bool wait, struct buffer_head **bhs)
{
int i, err;
for (i = 0; i < bh_count; i++) {
bhs[i] = ext4_getblk(NULL, inode, block + i, 0 /* map_flags */);
if (IS_ERR(bhs[i])) {
err = PTR_ERR(bhs[i]);
bh_count = i;
goto out_brelse;
}
}
for (i = 0; i < bh_count; i++)
/* Note that NULL bhs[i] is valid because of holes. */
if (bhs[i] && !ext4_buffer_uptodate(bhs[i]))
ext4_read_bh_lock(bhs[i], REQ_META | REQ_PRIO, false);
if (!wait)
return 0;
for (i = 0; i < bh_count; i++)
if (bhs[i])
wait_on_buffer(bhs[i]);
for (i = 0; i < bh_count; i++) {
if (bhs[i] && !buffer_uptodate(bhs[i])) {
err = -EIO;
goto out_brelse;
}
}
return 0;
out_brelse:
for (i = 0; i < bh_count; i++) {
brelse(bhs[i]);
bhs[i] = NULL;
}
return err;
}
int ext4_walk_page_buffers(handle_t *handle, struct inode *inode,
struct buffer_head *head,
unsigned from,
unsigned to,
int *partial,
int (*fn)(handle_t *handle, struct inode *inode,
struct buffer_head *bh))
{
struct buffer_head *bh;
unsigned block_start, block_end;
unsigned blocksize = head->b_size;
int err, ret = 0;
struct buffer_head *next;
for (bh = head, block_start = 0;
ret == 0 && (bh != head || !block_start);
block_start = block_end, bh = next) {
next = bh->b_this_page;
block_end = block_start + blocksize;
if (block_end <= from || block_start >= to) {
if (partial && !buffer_uptodate(bh))
*partial = 1;
continue;
}
err = (*fn)(handle, inode, bh);
if (!ret)
ret = err;
}
return ret;
}
/*
* To preserve ordering, it is essential that the hole instantiation and
* the data write be encapsulated in a single transaction. We cannot
* close off a transaction and start a new one between the ext4_get_block()
* and the commit_write(). So doing the jbd2_journal_start at the start of
* prepare_write() is the right place.
*
* Also, this function can nest inside ext4_writepage(). In that case, we
* *know* that ext4_writepage() has generated enough buffer credits to do the
* whole page. So we won't block on the journal in that case, which is good,
* because the caller may be PF_MEMALLOC.
*
* By accident, ext4 can be reentered when a transaction is open via
* quota file writes. If we were to commit the transaction while thus
* reentered, there can be a deadlock - we would be holding a quota
* lock, and the commit would never complete if another thread had a
* transaction open and was blocking on the quota lock - a ranking
* violation.
*
* So what we do is to rely on the fact that jbd2_journal_stop/journal_start
* will _not_ run commit under these circumstances because handle->h_ref
* is elevated. We'll still have enough credits for the tiny quotafile
* write.
*/
int do_journal_get_write_access(handle_t *handle, struct inode *inode,
struct buffer_head *bh)
{
int dirty = buffer_dirty(bh);
int ret;
if (!buffer_mapped(bh) || buffer_freed(bh))
return 0;
/*
* __block_write_begin() could have dirtied some buffers. Clean
* the dirty bit as jbd2_journal_get_write_access() could complain
* otherwise about fs integrity issues. Setting of the dirty bit
* by __block_write_begin() isn't a real problem here as we clear
* the bit before releasing a page lock and thus writeback cannot
* ever write the buffer.
*/
if (dirty)
clear_buffer_dirty(bh);
BUFFER_TRACE(bh, "get write access");
ret = ext4_journal_get_write_access(handle, inode->i_sb, bh,
EXT4_JTR_NONE);
if (!ret && dirty)
ret = ext4_handle_dirty_metadata(handle, NULL, bh);
return ret;
}
#ifdef CONFIG_FS_ENCRYPTION
static int ext4_block_write_begin(struct page *page, loff_t pos, unsigned len,
get_block_t *get_block)
{
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
unsigned from = pos & (PAGE_SIZE - 1);
unsigned to = from + len;
struct inode *inode = page->mapping->host;
unsigned block_start, block_end;
sector_t block;
int err = 0;
unsigned blocksize = inode->i_sb->s_blocksize;
unsigned bbits;
struct buffer_head *bh, *head, *wait[2];
int nr_wait = 0;
int i;
BUG_ON(!PageLocked(page));
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
BUG_ON(from > PAGE_SIZE);
BUG_ON(to > PAGE_SIZE);
BUG_ON(from > to);
if (!page_has_buffers(page))
create_empty_buffers(page, blocksize, 0);
head = page_buffers(page);
bbits = ilog2(blocksize);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
block = (sector_t)page->index << (PAGE_SHIFT - bbits);
for (bh = head, block_start = 0; bh != head || !block_start;
block++, block_start = block_end, bh = bh->b_this_page) {
block_end = block_start + blocksize;
if (block_end <= from || block_start >= to) {
if (PageUptodate(page)) {
set_buffer_uptodate(bh);
}
continue;
}
if (buffer_new(bh))
clear_buffer_new(bh);
if (!buffer_mapped(bh)) {
WARN_ON(bh->b_size != blocksize);
err = get_block(inode, block, bh, 1);
if (err)
break;
if (buffer_new(bh)) {
if (PageUptodate(page)) {
clear_buffer_new(bh);
set_buffer_uptodate(bh);
mark_buffer_dirty(bh);
continue;
}
if (block_end > to || block_start < from)
zero_user_segments(page, to, block_end,
block_start, from);
continue;
}
}
if (PageUptodate(page)) {
set_buffer_uptodate(bh);
continue;
}
if (!buffer_uptodate(bh) && !buffer_delay(bh) &&
!buffer_unwritten(bh) &&
(block_start < from || block_end > to)) {
ext4_read_bh_lock(bh, 0, false);
wait[nr_wait++] = bh;
}
}
/*
* If we issued read requests, let them complete.
*/
for (i = 0; i < nr_wait; i++) {
wait_on_buffer(wait[i]);
if (!buffer_uptodate(wait[i]))
err = -EIO;
}
if (unlikely(err)) {
page_zero_new_buffers(page, from, to);
} else if (fscrypt_inode_uses_fs_layer_crypto(inode)) {
for (i = 0; i < nr_wait; i++) {
int err2;
err2 = fscrypt_decrypt_pagecache_blocks(page, blocksize,
bh_offset(wait[i]));
if (err2) {
clear_buffer_uptodate(wait[i]);
err = err2;
}
}
}
return err;
}
#endif
static int ext4_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len,
struct page **pagep, void **fsdata)
{
struct inode *inode = mapping->host;
int ret, needed_blocks;
handle_t *handle;
int retries = 0;
struct page *page;
pgoff_t index;
unsigned from, to;
if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb))))
return -EIO;
trace_ext4_write_begin(inode, pos, len);
/*
* Reserve one block more for addition to orphan list in case
* we allocate blocks but write fails for some reason
*/
needed_blocks = ext4_writepage_trans_blocks(inode) + 1;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
index = pos >> PAGE_SHIFT;
from = pos & (PAGE_SIZE - 1);
to = from + len;
if (ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) {
ret = ext4_try_to_write_inline_data(mapping, inode, pos, len,
pagep);
if (ret < 0)
return ret;
if (ret == 1)
return 0;
}
/*
* grab_cache_page_write_begin() can take a long time if the
* system is thrashing due to memory pressure, or if the page
* is being written back. So grab it first before we start
* the transaction handle. This also allows us to allocate
* the page (if needed) without using GFP_NOFS.
*/
retry_grab:
page = grab_cache_page_write_begin(mapping, index);
if (!page)
return -ENOMEM;
unlock_page(page);
retry_journal:
handle = ext4_journal_start(inode, EXT4_HT_WRITE_PAGE, needed_blocks);
if (IS_ERR(handle)) {
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
return PTR_ERR(handle);
}
lock_page(page);
if (page->mapping != mapping) {
/* The page got truncated from under us */
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
ext4_journal_stop(handle);
goto retry_grab;
}
/* In case writeback began while the page was unlocked */
wait_for_stable_page(page);
#ifdef CONFIG_FS_ENCRYPTION
if (ext4_should_dioread_nolock(inode))
ret = ext4_block_write_begin(page, pos, len,
ext4_get_block_unwritten);
else
ret = ext4_block_write_begin(page, pos, len,
ext4_get_block);
#else
if (ext4_should_dioread_nolock(inode))
ret = __block_write_begin(page, pos, len,
ext4_get_block_unwritten);
else
ret = __block_write_begin(page, pos, len, ext4_get_block);
#endif
if (!ret && ext4_should_journal_data(inode)) {
ret = ext4_walk_page_buffers(handle, inode,
page_buffers(page), from, to, NULL,
do_journal_get_write_access);
}
if (ret) {
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
bool extended = (pos + len > inode->i_size) &&
!ext4_verity_in_progress(inode);
unlock_page(page);
/*
* __block_write_begin may have instantiated a few blocks
* outside i_size. Trim these off again. Don't need
* i_size_read because we hold i_rwsem.
*
* Add inode to orphan list in case we crash before
* truncate finishes
*/
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
if (extended && ext4_can_truncate(inode))
ext4_orphan_add(handle, inode);
ext4_journal_stop(handle);
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
if (extended) {
ext4_truncate_failed_write(inode);
/*
* If truncate failed early the inode might
* still be on the orphan list; we need to
* make sure the inode is removed from the
* orphan list in that case.
*/
if (inode->i_nlink)
ext4_orphan_del(NULL, inode);
}
if (ret == -ENOSPC &&
ext4_should_retry_alloc(inode->i_sb, &retries))
goto retry_journal;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
return ret;
}
*pagep = page;
return ret;
}
/* For write_end() in data=journal mode */
static int write_end_fn(handle_t *handle, struct inode *inode,
struct buffer_head *bh)
{
int ret;
if (!buffer_mapped(bh) || buffer_freed(bh))
return 0;
set_buffer_uptodate(bh);
ret = ext4_handle_dirty_metadata(handle, NULL, bh);
clear_buffer_meta(bh);
clear_buffer_prio(bh);
return ret;
}
/*
* We need to pick up the new inode size which generic_commit_write gave us
* `file' can be NULL - eg, when called from page_symlink().
*
* ext4 never places buffers on inode->i_mapping->private_list. metadata
* buffers are managed internally.
*/
static int ext4_write_end(struct file *file,
struct address_space *mapping,
loff_t pos, unsigned len, unsigned copied,
struct page *page, void *fsdata)
{
handle_t *handle = ext4_journal_current_handle();
struct inode *inode = mapping->host;
loff_t old_size = inode->i_size;
int ret = 0, ret2;
int i_size_changed = 0;
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
bool verity = ext4_verity_in_progress(inode);
trace_ext4_write_end(inode, pos, len, copied);
if (ext4_has_inline_data(inode))
return ext4_write_inline_data_end(inode, pos, len, copied, page);
copied = block_write_end(file, mapping, pos, len, copied, page, fsdata);
/*
* it's important to update i_size while still holding page lock:
* page writeout could otherwise come in and zero beyond i_size.
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
*
* If FS_IOC_ENABLE_VERITY is running on this inode, then Merkle tree
* blocks are being written past EOF, so skip the i_size update.
*/
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
if (!verity)
i_size_changed = ext4_update_inode_size(inode, pos + copied);
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
if (old_size < pos && !verity)
pagecache_isize_extended(inode, old_size, pos);
/*
* Don't mark the inode dirty under page lock. First, it unnecessarily
* makes the holding time of page lock longer. Second, it forces lock
* ordering of page lock and transaction start for journaling
* filesystems.
*/
if (i_size_changed)
ret = ext4_mark_inode_dirty(handle, inode);
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
if (pos + len > inode->i_size && !verity && ext4_can_truncate(inode))
/* if we have allocated more blocks and copied
* less. We will have blocks allocated outside
* inode->i_size. So truncate them
*/
ext4_orphan_add(handle, inode);
ret2 = ext4_journal_stop(handle);
if (!ret)
ret = ret2;
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
if (pos + len > inode->i_size && !verity) {
ext4_truncate_failed_write(inode);
/*
* If truncate failed early the inode might still be
* on the orphan list; we need to make sure the inode
* is removed from the orphan list in that case.
*/
if (inode->i_nlink)
ext4_orphan_del(NULL, inode);
}
return ret ? ret : copied;
}
/*
* This is a private version of page_zero_new_buffers() which doesn't
* set the buffer to be dirty, since in data=journalled mode we need
* to call ext4_handle_dirty_metadata() instead.
*/
static void ext4_journalled_zero_new_buffers(handle_t *handle,
struct inode *inode,
struct page *page,
unsigned from, unsigned to)
{
unsigned int block_start = 0, block_end;
struct buffer_head *head, *bh;
bh = head = page_buffers(page);
do {
block_end = block_start + bh->b_size;
if (buffer_new(bh)) {
if (block_end > from && block_start < to) {
if (!PageUptodate(page)) {
unsigned start, size;
start = max(from, block_start);
size = min(to, block_end) - start;
zero_user(page, start, size);
write_end_fn(handle, inode, bh);
}
clear_buffer_new(bh);
}
}
block_start = block_end;
bh = bh->b_this_page;
} while (bh != head);
}
static int ext4_journalled_write_end(struct file *file,
struct address_space *mapping,
loff_t pos, unsigned len, unsigned copied,
struct page *page, void *fsdata)
{
handle_t *handle = ext4_journal_current_handle();
struct inode *inode = mapping->host;
loff_t old_size = inode->i_size;
int ret = 0, ret2;
int partial = 0;
unsigned from, to;
int size_changed = 0;
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
bool verity = ext4_verity_in_progress(inode);
trace_ext4_journalled_write_end(inode, pos, len, copied);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
from = pos & (PAGE_SIZE - 1);
to = from + len;
BUG_ON(!ext4_handle_valid(handle));
if (ext4_has_inline_data(inode))
return ext4_write_inline_data_end(inode, pos, len, copied, page);
if (unlikely(copied < len) && !PageUptodate(page)) {
copied = 0;
ext4_journalled_zero_new_buffers(handle, inode, page, from, to);
} else {
if (unlikely(copied < len))
ext4_journalled_zero_new_buffers(handle, inode, page,
from + copied, to);
ret = ext4_walk_page_buffers(handle, inode, page_buffers(page),
from, from + copied, &partial,
write_end_fn);
if (!partial)
SetPageUptodate(page);
}
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
if (!verity)
size_changed = ext4_update_inode_size(inode, pos + copied);
ext4_set_inode_state(inode, EXT4_STATE_JDATA);
EXT4_I(inode)->i_datasync_tid = handle->h_transaction->t_tid;
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
if (old_size < pos && !verity)
pagecache_isize_extended(inode, old_size, pos);
if (size_changed) {
ret2 = ext4_mark_inode_dirty(handle, inode);
if (!ret)
ret = ret2;
}
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
if (pos + len > inode->i_size && !verity && ext4_can_truncate(inode))
/* if we have allocated more blocks and copied
* less. We will have blocks allocated outside
* inode->i_size. So truncate them
*/
ext4_orphan_add(handle, inode);
ret2 = ext4_journal_stop(handle);
if (!ret)
ret = ret2;
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
if (pos + len > inode->i_size && !verity) {
ext4_truncate_failed_write(inode);
/*
* If truncate failed early the inode might still be
* on the orphan list; we need to make sure the inode
* is removed from the orphan list in that case.
*/
if (inode->i_nlink)
ext4_orphan_del(NULL, inode);
}
return ret ? ret : copied;
}
/*
* Reserve space for a single cluster
*/
static int ext4_da_reserve_space(struct inode *inode)
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
struct ext4_inode_info *ei = EXT4_I(inode);
int ret;
/*
* We will charge metadata quota at writeout time; this saves
* us from metadata over-estimation, though we may go over by
* a small amount in the end. Here we just reserve for data.
*/
ret = dquot_reserve_block(inode, EXT4_C2B(sbi, 1));
if (ret)
return ret;
spin_lock(&ei->i_block_reservation_lock);
if (ext4_claim_free_clusters(sbi, 1, 0)) {
spin_unlock(&ei->i_block_reservation_lock);
dquot_release_reservation_block(inode, EXT4_C2B(sbi, 1));
return -ENOSPC;
}
ei->i_reserved_data_blocks++;
trace_ext4_da_reserve_space(inode);
spin_unlock(&ei->i_block_reservation_lock);
return 0; /* success */
}
void ext4_da_release_space(struct inode *inode, int to_free)
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
struct ext4_inode_info *ei = EXT4_I(inode);
if (!to_free)
return; /* Nothing to release, exit */
spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
trace_ext4_da_release_space(inode, to_free);
if (unlikely(to_free > ei->i_reserved_data_blocks)) {
/*
* if there aren't enough reserved blocks, then the
* counter is messed up somewhere. Since this
* function is called from invalidate page, it's
* harmless to return without any action.
*/
ext4_warning(inode->i_sb, "ext4_da_release_space: "
"ino %lu, to_free %d with only %d reserved "
"data blocks", inode->i_ino, to_free,
ei->i_reserved_data_blocks);
WARN_ON(1);
to_free = ei->i_reserved_data_blocks;
}
ei->i_reserved_data_blocks -= to_free;
/* update fs dirty data blocks counter */
percpu_counter_sub(&sbi->s_dirtyclusters_counter, to_free);
spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
dquot_release_reservation_block(inode, EXT4_C2B(sbi, to_free));
}
/*
* Delayed allocation stuff
*/
struct mpage_da_data {
struct inode *inode;
struct writeback_control *wbc;
pgoff_t first_page; /* The first page to write */
pgoff_t next_page; /* Current page to examine */
pgoff_t last_page; /* Last page to examine */
/*
* Extent to map - this can be after first_page because that can be
* fully mapped. We somewhat abuse m_flags to store whether the extent
* is delalloc or unwritten.
*/
struct ext4_map_blocks map;
struct ext4_io_submit io_submit; /* IO submission data */
unsigned int do_map:1;
unsigned int scanned_until_end:1;
};
static void mpage_release_unused_pages(struct mpage_da_data *mpd,
bool invalidate)
{
int nr_pages, i;
pgoff_t index, end;
struct pagevec pvec;
struct inode *inode = mpd->inode;
struct address_space *mapping = inode->i_mapping;
/* This is necessary when next_page == 0. */
if (mpd->first_page >= mpd->next_page)
return;
mpd->scanned_until_end = 0;
index = mpd->first_page;
end = mpd->next_page - 1;
if (invalidate) {
ext4_lblk_t start, last;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
start = index << (PAGE_SHIFT - inode->i_blkbits);
last = end << (PAGE_SHIFT - inode->i_blkbits);
ext4_es_remove_extent(inode, start, last - start + 1);
}
pagevec_init(&pvec);
while (index <= end) {
nr_pages = pagevec_lookup_range(&pvec, mapping, &index, end);
if (nr_pages == 0)
break;
for (i = 0; i < nr_pages; i++) {
struct page *page = pvec.pages[i];
struct folio *folio = page_folio(page);
BUG_ON(!folio_test_locked(folio));
BUG_ON(folio_test_writeback(folio));
if (invalidate) {
if (folio_mapped(folio))
folio_clear_dirty_for_io(folio);
block_invalidate_folio(folio, 0,
folio_size(folio));
folio_clear_uptodate(folio);
}
folio_unlock(folio);
}
pagevec_release(&pvec);
}
}
static void ext4_print_free_blocks(struct inode *inode)
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
struct super_block *sb = inode->i_sb;
struct ext4_inode_info *ei = EXT4_I(inode);
ext4_msg(sb, KERN_CRIT, "Total free blocks count %lld",
EXT4_C2B(EXT4_SB(inode->i_sb),
ext4_count_free_clusters(sb)));
ext4_msg(sb, KERN_CRIT, "Free/Dirty block details");
ext4_msg(sb, KERN_CRIT, "free_blocks=%lld",
(long long) EXT4_C2B(EXT4_SB(sb),
percpu_counter_sum(&sbi->s_freeclusters_counter)));
ext4_msg(sb, KERN_CRIT, "dirty_blocks=%lld",
(long long) EXT4_C2B(EXT4_SB(sb),
percpu_counter_sum(&sbi->s_dirtyclusters_counter)));
ext4_msg(sb, KERN_CRIT, "Block reservation details");
ext4_msg(sb, KERN_CRIT, "i_reserved_data_blocks=%u",
ei->i_reserved_data_blocks);
return;
}
static int ext4_bh_delay_or_unwritten(handle_t *handle, struct inode *inode,
struct buffer_head *bh)
{
return (buffer_delay(bh) || buffer_unwritten(bh)) && buffer_dirty(bh);
}
/*
* ext4_insert_delayed_block - adds a delayed block to the extents status
* tree, incrementing the reserved cluster/block
* count or making a pending reservation
* where needed
*
* @inode - file containing the newly added block
* @lblk - logical block to be added
*
* Returns 0 on success, negative error code on failure.
*/
static int ext4_insert_delayed_block(struct inode *inode, ext4_lblk_t lblk)
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
int ret;
bool allocated = false;
bool reserved = false;
/*
* If the cluster containing lblk is shared with a delayed,
* written, or unwritten extent in a bigalloc file system, it's
* already been accounted for and does not need to be reserved.
* A pending reservation must be made for the cluster if it's
* shared with a written or unwritten extent and doesn't already
* have one. Written and unwritten extents can be purged from the
* extents status tree if the system is under memory pressure, so
* it's necessary to examine the extent tree if a search of the
* extents status tree doesn't get a match.
*/
if (sbi->s_cluster_ratio == 1) {
ret = ext4_da_reserve_space(inode);
if (ret != 0) /* ENOSPC */
goto errout;
reserved = true;
} else { /* bigalloc */
if (!ext4_es_scan_clu(inode, &ext4_es_is_delonly, lblk)) {
if (!ext4_es_scan_clu(inode,
&ext4_es_is_mapped, lblk)) {
ret = ext4_clu_mapped(inode,
EXT4_B2C(sbi, lblk));
if (ret < 0)
goto errout;
if (ret == 0) {
ret = ext4_da_reserve_space(inode);
if (ret != 0) /* ENOSPC */
goto errout;
reserved = true;
} else {
allocated = true;
}
} else {
allocated = true;
}
}
}
ret = ext4_es_insert_delayed_block(inode, lblk, allocated);
if (ret && reserved)
ext4_da_release_space(inode, 1);
errout:
return ret;
}
ext4: attempt to fix race in bigalloc code path Currently, there exists a race between delayed allocated writes and the writeback when bigalloc feature is in use. The race was because we wanted to determine what blocks in a cluster are under delayed allocation and we were using buffer_delayed(bh) check for it. But, the writeback codepath clears this bit without any synchronization which resulted in a race and an ext4 warning similar to: EXT4-fs (ram1): ext4_da_update_reserve_space: ino 13, used 1 with only 0 reserved data blocks The race existed in two places. (1) between ext4_find_delalloc_range() and ext4_map_blocks() when called from writeback code path. (2) between ext4_find_delalloc_range() and ext4_da_get_block_prep() (where buffer_delayed(bh) is set. To fix (1), this patch introduces a new buffer_head state bit - BH_Da_Mapped. This bit is set under the protection of EXT4_I(inode)->i_data_sem when we have actually mapped the delayed allocated blocks during the writeout time. We can now reliably check for this bit inside ext4_find_delalloc_range() to determine whether the reservation for the blocks have already been claimed or not. To fix (2), it was necessary to set buffer_delay(bh) under the protection of i_data_sem. So, I extracted the very beginning of ext4_map_blocks into a new function - ext4_da_map_blocks() - and performed the required setting of bh_delay bit and the quota reservation under the protection of i_data_sem. These two fixes makes the checking of buffer_delay(bh) and buffer_da_mapped(bh) consistent, thus removing the race. Tested: I was able to reproduce the problem by running 'dd' and 'fsync' in parallel. Also, xfstests sometimes used to reproduce this race. After the fix both my test and xfstests were successful and no race (warning message) was observed. Google-Bug-Id: 4997027 Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-10 07:20:51 +08:00
/*
* This function is grabs code from the very beginning of
* ext4_map_blocks, but assumes that the caller is from delayed write
* time. This function looks up the requested blocks and sets the
* buffer delay bit under the protection of i_data_sem.
*/
static int ext4_da_map_blocks(struct inode *inode, sector_t iblock,
struct ext4_map_blocks *map,
struct buffer_head *bh)
{
struct extent_status es;
ext4: attempt to fix race in bigalloc code path Currently, there exists a race between delayed allocated writes and the writeback when bigalloc feature is in use. The race was because we wanted to determine what blocks in a cluster are under delayed allocation and we were using buffer_delayed(bh) check for it. But, the writeback codepath clears this bit without any synchronization which resulted in a race and an ext4 warning similar to: EXT4-fs (ram1): ext4_da_update_reserve_space: ino 13, used 1 with only 0 reserved data blocks The race existed in two places. (1) between ext4_find_delalloc_range() and ext4_map_blocks() when called from writeback code path. (2) between ext4_find_delalloc_range() and ext4_da_get_block_prep() (where buffer_delayed(bh) is set. To fix (1), this patch introduces a new buffer_head state bit - BH_Da_Mapped. This bit is set under the protection of EXT4_I(inode)->i_data_sem when we have actually mapped the delayed allocated blocks during the writeout time. We can now reliably check for this bit inside ext4_find_delalloc_range() to determine whether the reservation for the blocks have already been claimed or not. To fix (2), it was necessary to set buffer_delay(bh) under the protection of i_data_sem. So, I extracted the very beginning of ext4_map_blocks into a new function - ext4_da_map_blocks() - and performed the required setting of bh_delay bit and the quota reservation under the protection of i_data_sem. These two fixes makes the checking of buffer_delay(bh) and buffer_da_mapped(bh) consistent, thus removing the race. Tested: I was able to reproduce the problem by running 'dd' and 'fsync' in parallel. Also, xfstests sometimes used to reproduce this race. After the fix both my test and xfstests were successful and no race (warning message) was observed. Google-Bug-Id: 4997027 Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-10 07:20:51 +08:00
int retval;
sector_t invalid_block = ~((sector_t) 0xffff);
#ifdef ES_AGGRESSIVE_TEST
struct ext4_map_blocks orig_map;
memcpy(&orig_map, map, sizeof(*map));
#endif
ext4: attempt to fix race in bigalloc code path Currently, there exists a race between delayed allocated writes and the writeback when bigalloc feature is in use. The race was because we wanted to determine what blocks in a cluster are under delayed allocation and we were using buffer_delayed(bh) check for it. But, the writeback codepath clears this bit without any synchronization which resulted in a race and an ext4 warning similar to: EXT4-fs (ram1): ext4_da_update_reserve_space: ino 13, used 1 with only 0 reserved data blocks The race existed in two places. (1) between ext4_find_delalloc_range() and ext4_map_blocks() when called from writeback code path. (2) between ext4_find_delalloc_range() and ext4_da_get_block_prep() (where buffer_delayed(bh) is set. To fix (1), this patch introduces a new buffer_head state bit - BH_Da_Mapped. This bit is set under the protection of EXT4_I(inode)->i_data_sem when we have actually mapped the delayed allocated blocks during the writeout time. We can now reliably check for this bit inside ext4_find_delalloc_range() to determine whether the reservation for the blocks have already been claimed or not. To fix (2), it was necessary to set buffer_delay(bh) under the protection of i_data_sem. So, I extracted the very beginning of ext4_map_blocks into a new function - ext4_da_map_blocks() - and performed the required setting of bh_delay bit and the quota reservation under the protection of i_data_sem. These two fixes makes the checking of buffer_delay(bh) and buffer_da_mapped(bh) consistent, thus removing the race. Tested: I was able to reproduce the problem by running 'dd' and 'fsync' in parallel. Also, xfstests sometimes used to reproduce this race. After the fix both my test and xfstests were successful and no race (warning message) was observed. Google-Bug-Id: 4997027 Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-10 07:20:51 +08:00
if (invalid_block < ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es))
invalid_block = ~0;
map->m_flags = 0;
ext_debug(inode, "max_blocks %u, logical block %lu\n", map->m_len,
ext4: attempt to fix race in bigalloc code path Currently, there exists a race between delayed allocated writes and the writeback when bigalloc feature is in use. The race was because we wanted to determine what blocks in a cluster are under delayed allocation and we were using buffer_delayed(bh) check for it. But, the writeback codepath clears this bit without any synchronization which resulted in a race and an ext4 warning similar to: EXT4-fs (ram1): ext4_da_update_reserve_space: ino 13, used 1 with only 0 reserved data blocks The race existed in two places. (1) between ext4_find_delalloc_range() and ext4_map_blocks() when called from writeback code path. (2) between ext4_find_delalloc_range() and ext4_da_get_block_prep() (where buffer_delayed(bh) is set. To fix (1), this patch introduces a new buffer_head state bit - BH_Da_Mapped. This bit is set under the protection of EXT4_I(inode)->i_data_sem when we have actually mapped the delayed allocated blocks during the writeout time. We can now reliably check for this bit inside ext4_find_delalloc_range() to determine whether the reservation for the blocks have already been claimed or not. To fix (2), it was necessary to set buffer_delay(bh) under the protection of i_data_sem. So, I extracted the very beginning of ext4_map_blocks into a new function - ext4_da_map_blocks() - and performed the required setting of bh_delay bit and the quota reservation under the protection of i_data_sem. These two fixes makes the checking of buffer_delay(bh) and buffer_da_mapped(bh) consistent, thus removing the race. Tested: I was able to reproduce the problem by running 'dd' and 'fsync' in parallel. Also, xfstests sometimes used to reproduce this race. After the fix both my test and xfstests were successful and no race (warning message) was observed. Google-Bug-Id: 4997027 Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-10 07:20:51 +08:00
(unsigned long) map->m_lblk);
/* Lookup extent status tree firstly */
if (ext4_es_lookup_extent(inode, iblock, NULL, &es)) {
if (ext4_es_is_hole(&es)) {
retval = 0;
down_read(&EXT4_I(inode)->i_data_sem);
goto add_delayed;
}
/*
* Delayed extent could be allocated by fallocate.
* So we need to check it.
*/
if (ext4_es_is_delayed(&es) && !ext4_es_is_unwritten(&es)) {
map_bh(bh, inode->i_sb, invalid_block);
set_buffer_new(bh);
set_buffer_delay(bh);
return 0;
}
map->m_pblk = ext4_es_pblock(&es) + iblock - es.es_lblk;
retval = es.es_len - (iblock - es.es_lblk);
if (retval > map->m_len)
retval = map->m_len;
map->m_len = retval;
if (ext4_es_is_written(&es))
map->m_flags |= EXT4_MAP_MAPPED;
else if (ext4_es_is_unwritten(&es))
map->m_flags |= EXT4_MAP_UNWRITTEN;
else
BUG();
#ifdef ES_AGGRESSIVE_TEST
ext4_map_blocks_es_recheck(NULL, inode, map, &orig_map, 0);
#endif
return retval;
}
ext4: attempt to fix race in bigalloc code path Currently, there exists a race between delayed allocated writes and the writeback when bigalloc feature is in use. The race was because we wanted to determine what blocks in a cluster are under delayed allocation and we were using buffer_delayed(bh) check for it. But, the writeback codepath clears this bit without any synchronization which resulted in a race and an ext4 warning similar to: EXT4-fs (ram1): ext4_da_update_reserve_space: ino 13, used 1 with only 0 reserved data blocks The race existed in two places. (1) between ext4_find_delalloc_range() and ext4_map_blocks() when called from writeback code path. (2) between ext4_find_delalloc_range() and ext4_da_get_block_prep() (where buffer_delayed(bh) is set. To fix (1), this patch introduces a new buffer_head state bit - BH_Da_Mapped. This bit is set under the protection of EXT4_I(inode)->i_data_sem when we have actually mapped the delayed allocated blocks during the writeout time. We can now reliably check for this bit inside ext4_find_delalloc_range() to determine whether the reservation for the blocks have already been claimed or not. To fix (2), it was necessary to set buffer_delay(bh) under the protection of i_data_sem. So, I extracted the very beginning of ext4_map_blocks into a new function - ext4_da_map_blocks() - and performed the required setting of bh_delay bit and the quota reservation under the protection of i_data_sem. These two fixes makes the checking of buffer_delay(bh) and buffer_da_mapped(bh) consistent, thus removing the race. Tested: I was able to reproduce the problem by running 'dd' and 'fsync' in parallel. Also, xfstests sometimes used to reproduce this race. After the fix both my test and xfstests were successful and no race (warning message) was observed. Google-Bug-Id: 4997027 Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-10 07:20:51 +08:00
/*
* Try to see if we can get the block without requesting a new
* file system block.
*/
down_read(&EXT4_I(inode)->i_data_sem);
if (ext4_has_inline_data(inode))
retval = 0;
else if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
retval = ext4_ext_map_blocks(NULL, inode, map, 0);
ext4: attempt to fix race in bigalloc code path Currently, there exists a race between delayed allocated writes and the writeback when bigalloc feature is in use. The race was because we wanted to determine what blocks in a cluster are under delayed allocation and we were using buffer_delayed(bh) check for it. But, the writeback codepath clears this bit without any synchronization which resulted in a race and an ext4 warning similar to: EXT4-fs (ram1): ext4_da_update_reserve_space: ino 13, used 1 with only 0 reserved data blocks The race existed in two places. (1) between ext4_find_delalloc_range() and ext4_map_blocks() when called from writeback code path. (2) between ext4_find_delalloc_range() and ext4_da_get_block_prep() (where buffer_delayed(bh) is set. To fix (1), this patch introduces a new buffer_head state bit - BH_Da_Mapped. This bit is set under the protection of EXT4_I(inode)->i_data_sem when we have actually mapped the delayed allocated blocks during the writeout time. We can now reliably check for this bit inside ext4_find_delalloc_range() to determine whether the reservation for the blocks have already been claimed or not. To fix (2), it was necessary to set buffer_delay(bh) under the protection of i_data_sem. So, I extracted the very beginning of ext4_map_blocks into a new function - ext4_da_map_blocks() - and performed the required setting of bh_delay bit and the quota reservation under the protection of i_data_sem. These two fixes makes the checking of buffer_delay(bh) and buffer_da_mapped(bh) consistent, thus removing the race. Tested: I was able to reproduce the problem by running 'dd' and 'fsync' in parallel. Also, xfstests sometimes used to reproduce this race. After the fix both my test and xfstests were successful and no race (warning message) was observed. Google-Bug-Id: 4997027 Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-10 07:20:51 +08:00
else
retval = ext4_ind_map_blocks(NULL, inode, map, 0);
ext4: attempt to fix race in bigalloc code path Currently, there exists a race between delayed allocated writes and the writeback when bigalloc feature is in use. The race was because we wanted to determine what blocks in a cluster are under delayed allocation and we were using buffer_delayed(bh) check for it. But, the writeback codepath clears this bit without any synchronization which resulted in a race and an ext4 warning similar to: EXT4-fs (ram1): ext4_da_update_reserve_space: ino 13, used 1 with only 0 reserved data blocks The race existed in two places. (1) between ext4_find_delalloc_range() and ext4_map_blocks() when called from writeback code path. (2) between ext4_find_delalloc_range() and ext4_da_get_block_prep() (where buffer_delayed(bh) is set. To fix (1), this patch introduces a new buffer_head state bit - BH_Da_Mapped. This bit is set under the protection of EXT4_I(inode)->i_data_sem when we have actually mapped the delayed allocated blocks during the writeout time. We can now reliably check for this bit inside ext4_find_delalloc_range() to determine whether the reservation for the blocks have already been claimed or not. To fix (2), it was necessary to set buffer_delay(bh) under the protection of i_data_sem. So, I extracted the very beginning of ext4_map_blocks into a new function - ext4_da_map_blocks() - and performed the required setting of bh_delay bit and the quota reservation under the protection of i_data_sem. These two fixes makes the checking of buffer_delay(bh) and buffer_da_mapped(bh) consistent, thus removing the race. Tested: I was able to reproduce the problem by running 'dd' and 'fsync' in parallel. Also, xfstests sometimes used to reproduce this race. After the fix both my test and xfstests were successful and no race (warning message) was observed. Google-Bug-Id: 4997027 Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-10 07:20:51 +08:00
add_delayed:
ext4: attempt to fix race in bigalloc code path Currently, there exists a race between delayed allocated writes and the writeback when bigalloc feature is in use. The race was because we wanted to determine what blocks in a cluster are under delayed allocation and we were using buffer_delayed(bh) check for it. But, the writeback codepath clears this bit without any synchronization which resulted in a race and an ext4 warning similar to: EXT4-fs (ram1): ext4_da_update_reserve_space: ino 13, used 1 with only 0 reserved data blocks The race existed in two places. (1) between ext4_find_delalloc_range() and ext4_map_blocks() when called from writeback code path. (2) between ext4_find_delalloc_range() and ext4_da_get_block_prep() (where buffer_delayed(bh) is set. To fix (1), this patch introduces a new buffer_head state bit - BH_Da_Mapped. This bit is set under the protection of EXT4_I(inode)->i_data_sem when we have actually mapped the delayed allocated blocks during the writeout time. We can now reliably check for this bit inside ext4_find_delalloc_range() to determine whether the reservation for the blocks have already been claimed or not. To fix (2), it was necessary to set buffer_delay(bh) under the protection of i_data_sem. So, I extracted the very beginning of ext4_map_blocks into a new function - ext4_da_map_blocks() - and performed the required setting of bh_delay bit and the quota reservation under the protection of i_data_sem. These two fixes makes the checking of buffer_delay(bh) and buffer_da_mapped(bh) consistent, thus removing the race. Tested: I was able to reproduce the problem by running 'dd' and 'fsync' in parallel. Also, xfstests sometimes used to reproduce this race. After the fix both my test and xfstests were successful and no race (warning message) was observed. Google-Bug-Id: 4997027 Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-10 07:20:51 +08:00
if (retval == 0) {
int ret;
ext4: attempt to fix race in bigalloc code path Currently, there exists a race between delayed allocated writes and the writeback when bigalloc feature is in use. The race was because we wanted to determine what blocks in a cluster are under delayed allocation and we were using buffer_delayed(bh) check for it. But, the writeback codepath clears this bit without any synchronization which resulted in a race and an ext4 warning similar to: EXT4-fs (ram1): ext4_da_update_reserve_space: ino 13, used 1 with only 0 reserved data blocks The race existed in two places. (1) between ext4_find_delalloc_range() and ext4_map_blocks() when called from writeback code path. (2) between ext4_find_delalloc_range() and ext4_da_get_block_prep() (where buffer_delayed(bh) is set. To fix (1), this patch introduces a new buffer_head state bit - BH_Da_Mapped. This bit is set under the protection of EXT4_I(inode)->i_data_sem when we have actually mapped the delayed allocated blocks during the writeout time. We can now reliably check for this bit inside ext4_find_delalloc_range() to determine whether the reservation for the blocks have already been claimed or not. To fix (2), it was necessary to set buffer_delay(bh) under the protection of i_data_sem. So, I extracted the very beginning of ext4_map_blocks into a new function - ext4_da_map_blocks() - and performed the required setting of bh_delay bit and the quota reservation under the protection of i_data_sem. These two fixes makes the checking of buffer_delay(bh) and buffer_da_mapped(bh) consistent, thus removing the race. Tested: I was able to reproduce the problem by running 'dd' and 'fsync' in parallel. Also, xfstests sometimes used to reproduce this race. After the fix both my test and xfstests were successful and no race (warning message) was observed. Google-Bug-Id: 4997027 Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-10 07:20:51 +08:00
/*
* XXX: __block_prepare_write() unmaps passed block,
* is it OK?
*/
ret = ext4_insert_delayed_block(inode, map->m_lblk);
if (ret != 0) {
retval = ret;
goto out_unlock;
}
ext4: attempt to fix race in bigalloc code path Currently, there exists a race between delayed allocated writes and the writeback when bigalloc feature is in use. The race was because we wanted to determine what blocks in a cluster are under delayed allocation and we were using buffer_delayed(bh) check for it. But, the writeback codepath clears this bit without any synchronization which resulted in a race and an ext4 warning similar to: EXT4-fs (ram1): ext4_da_update_reserve_space: ino 13, used 1 with only 0 reserved data blocks The race existed in two places. (1) between ext4_find_delalloc_range() and ext4_map_blocks() when called from writeback code path. (2) between ext4_find_delalloc_range() and ext4_da_get_block_prep() (where buffer_delayed(bh) is set. To fix (1), this patch introduces a new buffer_head state bit - BH_Da_Mapped. This bit is set under the protection of EXT4_I(inode)->i_data_sem when we have actually mapped the delayed allocated blocks during the writeout time. We can now reliably check for this bit inside ext4_find_delalloc_range() to determine whether the reservation for the blocks have already been claimed or not. To fix (2), it was necessary to set buffer_delay(bh) under the protection of i_data_sem. So, I extracted the very beginning of ext4_map_blocks into a new function - ext4_da_map_blocks() - and performed the required setting of bh_delay bit and the quota reservation under the protection of i_data_sem. These two fixes makes the checking of buffer_delay(bh) and buffer_da_mapped(bh) consistent, thus removing the race. Tested: I was able to reproduce the problem by running 'dd' and 'fsync' in parallel. Also, xfstests sometimes used to reproduce this race. After the fix both my test and xfstests were successful and no race (warning message) was observed. Google-Bug-Id: 4997027 Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-10 07:20:51 +08:00
map_bh(bh, inode->i_sb, invalid_block);
set_buffer_new(bh);
set_buffer_delay(bh);
} else if (retval > 0) {
int ret;
unsigned int status;
if (unlikely(retval != map->m_len)) {
ext4_warning(inode->i_sb,
"ES len assertion failed for inode "
"%lu: retval %d != map->m_len %d",
inode->i_ino, retval, map->m_len);
WARN_ON(1);
}
status = map->m_flags & EXT4_MAP_UNWRITTEN ?
EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN;
ret = ext4_es_insert_extent(inode, map->m_lblk, map->m_len,
map->m_pblk, status);
if (ret != 0)
retval = ret;
ext4: attempt to fix race in bigalloc code path Currently, there exists a race between delayed allocated writes and the writeback when bigalloc feature is in use. The race was because we wanted to determine what blocks in a cluster are under delayed allocation and we were using buffer_delayed(bh) check for it. But, the writeback codepath clears this bit without any synchronization which resulted in a race and an ext4 warning similar to: EXT4-fs (ram1): ext4_da_update_reserve_space: ino 13, used 1 with only 0 reserved data blocks The race existed in two places. (1) between ext4_find_delalloc_range() and ext4_map_blocks() when called from writeback code path. (2) between ext4_find_delalloc_range() and ext4_da_get_block_prep() (where buffer_delayed(bh) is set. To fix (1), this patch introduces a new buffer_head state bit - BH_Da_Mapped. This bit is set under the protection of EXT4_I(inode)->i_data_sem when we have actually mapped the delayed allocated blocks during the writeout time. We can now reliably check for this bit inside ext4_find_delalloc_range() to determine whether the reservation for the blocks have already been claimed or not. To fix (2), it was necessary to set buffer_delay(bh) under the protection of i_data_sem. So, I extracted the very beginning of ext4_map_blocks into a new function - ext4_da_map_blocks() - and performed the required setting of bh_delay bit and the quota reservation under the protection of i_data_sem. These two fixes makes the checking of buffer_delay(bh) and buffer_da_mapped(bh) consistent, thus removing the race. Tested: I was able to reproduce the problem by running 'dd' and 'fsync' in parallel. Also, xfstests sometimes used to reproduce this race. After the fix both my test and xfstests were successful and no race (warning message) was observed. Google-Bug-Id: 4997027 Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-10 07:20:51 +08:00
}
out_unlock:
up_read((&EXT4_I(inode)->i_data_sem));
return retval;
}
/*
* This is a special get_block_t callback which is used by
* ext4_da_write_begin(). It will either return mapped block or
* reserve space for a single block.
*
* For delayed buffer_head we have BH_Mapped, BH_New, BH_Delay set.
* We also have b_blocknr = -1 and b_bdev initialized properly
*
* For unwritten buffer_head we have BH_Mapped, BH_New, BH_Unwritten set.
* We also have b_blocknr = physicalblock mapping unwritten extent and b_bdev
* initialized properly.
*/
int ext4_da_get_block_prep(struct inode *inode, sector_t iblock,
struct buffer_head *bh, int create)
{
struct ext4_map_blocks map;
int ret = 0;
BUG_ON(create == 0);
BUG_ON(bh->b_size != inode->i_sb->s_blocksize);
map.m_lblk = iblock;
map.m_len = 1;
/*
* first, we need to know whether the block is allocated already
* preallocated blocks are unmapped but should treated
* the same as allocated blocks.
*/
ext4: attempt to fix race in bigalloc code path Currently, there exists a race between delayed allocated writes and the writeback when bigalloc feature is in use. The race was because we wanted to determine what blocks in a cluster are under delayed allocation and we were using buffer_delayed(bh) check for it. But, the writeback codepath clears this bit without any synchronization which resulted in a race and an ext4 warning similar to: EXT4-fs (ram1): ext4_da_update_reserve_space: ino 13, used 1 with only 0 reserved data blocks The race existed in two places. (1) between ext4_find_delalloc_range() and ext4_map_blocks() when called from writeback code path. (2) between ext4_find_delalloc_range() and ext4_da_get_block_prep() (where buffer_delayed(bh) is set. To fix (1), this patch introduces a new buffer_head state bit - BH_Da_Mapped. This bit is set under the protection of EXT4_I(inode)->i_data_sem when we have actually mapped the delayed allocated blocks during the writeout time. We can now reliably check for this bit inside ext4_find_delalloc_range() to determine whether the reservation for the blocks have already been claimed or not. To fix (2), it was necessary to set buffer_delay(bh) under the protection of i_data_sem. So, I extracted the very beginning of ext4_map_blocks into a new function - ext4_da_map_blocks() - and performed the required setting of bh_delay bit and the quota reservation under the protection of i_data_sem. These two fixes makes the checking of buffer_delay(bh) and buffer_da_mapped(bh) consistent, thus removing the race. Tested: I was able to reproduce the problem by running 'dd' and 'fsync' in parallel. Also, xfstests sometimes used to reproduce this race. After the fix both my test and xfstests were successful and no race (warning message) was observed. Google-Bug-Id: 4997027 Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-10 07:20:51 +08:00
ret = ext4_da_map_blocks(inode, iblock, &map, bh);
if (ret <= 0)
return ret;
map_bh(bh, inode->i_sb, map.m_pblk);
ext4_update_bh_state(bh, map.m_flags);
if (buffer_unwritten(bh)) {
/* A delayed write to unwritten bh should be marked
* new and mapped. Mapped ensures that we don't do
* get_block multiple times when we write to the same
* offset and new ensures that we do proper zero out
* for partial write.
*/
set_buffer_new(bh);
set_buffer_mapped(bh);
}
return 0;
}
static int __ext4_journalled_writepage(struct page *page,
unsigned int len)
{
struct address_space *mapping = page->mapping;
struct inode *inode = mapping->host;
handle_t *handle = NULL;
int ret = 0, err = 0;
int inline_data = ext4_has_inline_data(inode);
struct buffer_head *inode_bh = NULL;
loff_t size;
ClearPageChecked(page);
if (inline_data) {
BUG_ON(page->index != 0);
BUG_ON(len > ext4_get_max_inline_size(inode));
inode_bh = ext4_journalled_write_inline_data(inode, len, page);
if (inode_bh == NULL)
goto out;
}
ext4: fix race between truncate and __ext4_journalled_writepage() The commit cf108bca465d: "ext4: Invert the locking order of page_lock and transaction start" caused __ext4_journalled_writepage() to drop the page lock before the page was written back, as part of changing the locking order to jbd2_journal_start -> page_lock. However, this introduced a potential race if there was a truncate racing with the data=journalled writeback mode. Fix this by grabbing the page lock after starting the journal handle, and then checking to see if page had gotten truncated out from under us. This fixes a number of different warnings or BUG_ON's when running xfstests generic/086 in data=journalled mode, including: jbd2_journal_dirty_metadata: vdc-8: bad jh for block 115643: transaction (ee3fe7 c0, 164), jh->b_transaction ( (null), 0), jh->b_next_transaction ( (null), 0), jlist 0 - and - kernel BUG at /usr/projects/linux/ext4/fs/jbd2/transaction.c:2200! ... Call Trace: [<c02b2ded>] ? __ext4_journalled_invalidatepage+0x117/0x117 [<c02b2de5>] __ext4_journalled_invalidatepage+0x10f/0x117 [<c02b2ded>] ? __ext4_journalled_invalidatepage+0x117/0x117 [<c027d883>] ? lock_buffer+0x36/0x36 [<c02b2dfa>] ext4_journalled_invalidatepage+0xd/0x22 [<c0229139>] do_invalidatepage+0x22/0x26 [<c0229198>] truncate_inode_page+0x5b/0x85 [<c022934b>] truncate_inode_pages_range+0x156/0x38c [<c0229592>] truncate_inode_pages+0x11/0x15 [<c022962d>] truncate_pagecache+0x55/0x71 [<c02b913b>] ext4_setattr+0x4a9/0x560 [<c01ca542>] ? current_kernel_time+0x10/0x44 [<c026c4d8>] notify_change+0x1c7/0x2be [<c0256a00>] do_truncate+0x65/0x85 [<c0226f31>] ? file_ra_state_init+0x12/0x29 - and - WARNING: CPU: 1 PID: 1331 at /usr/projects/linux/ext4/fs/jbd2/transaction.c:1396 irty_metadata+0x14a/0x1ae() ... Call Trace: [<c01b879f>] ? console_unlock+0x3a1/0x3ce [<c082cbb4>] dump_stack+0x48/0x60 [<c0178b65>] warn_slowpath_common+0x89/0xa0 [<c02ef2cf>] ? jbd2_journal_dirty_metadata+0x14a/0x1ae [<c0178bef>] warn_slowpath_null+0x14/0x18 [<c02ef2cf>] jbd2_journal_dirty_metadata+0x14a/0x1ae [<c02d8615>] __ext4_handle_dirty_metadata+0xd4/0x19d [<c02b2f44>] write_end_fn+0x40/0x53 [<c02b4a16>] ext4_walk_page_buffers+0x4e/0x6a [<c02b59e7>] ext4_writepage+0x354/0x3b8 [<c02b2f04>] ? mpage_release_unused_pages+0xd4/0xd4 [<c02b1b21>] ? wait_on_buffer+0x2c/0x2c [<c02b5a4b>] ? ext4_writepage+0x3b8/0x3b8 [<c02b5a5b>] __writepage+0x10/0x2e [<c0225956>] write_cache_pages+0x22d/0x32c [<c02b5a4b>] ? ext4_writepage+0x3b8/0x3b8 [<c02b6ee8>] ext4_writepages+0x102/0x607 [<c019adfe>] ? sched_clock_local+0x10/0x10e [<c01a8a7c>] ? __lock_is_held+0x2e/0x44 [<c01a8ad5>] ? lock_is_held+0x43/0x51 [<c0226dff>] do_writepages+0x1c/0x29 [<c0276bed>] __writeback_single_inode+0xc3/0x545 [<c0277c07>] writeback_sb_inodes+0x21f/0x36d ... Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2015-06-13 11:45:33 +08:00
/*
* We need to release the page lock before we start the
* journal, so grab a reference so the page won't disappear
* out from under us.
*/
get_page(page);
unlock_page(page);
handle = ext4_journal_start(inode, EXT4_HT_WRITE_PAGE,
ext4_writepage_trans_blocks(inode));
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
ext4: fix race between truncate and __ext4_journalled_writepage() The commit cf108bca465d: "ext4: Invert the locking order of page_lock and transaction start" caused __ext4_journalled_writepage() to drop the page lock before the page was written back, as part of changing the locking order to jbd2_journal_start -> page_lock. However, this introduced a potential race if there was a truncate racing with the data=journalled writeback mode. Fix this by grabbing the page lock after starting the journal handle, and then checking to see if page had gotten truncated out from under us. This fixes a number of different warnings or BUG_ON's when running xfstests generic/086 in data=journalled mode, including: jbd2_journal_dirty_metadata: vdc-8: bad jh for block 115643: transaction (ee3fe7 c0, 164), jh->b_transaction ( (null), 0), jh->b_next_transaction ( (null), 0), jlist 0 - and - kernel BUG at /usr/projects/linux/ext4/fs/jbd2/transaction.c:2200! ... Call Trace: [<c02b2ded>] ? __ext4_journalled_invalidatepage+0x117/0x117 [<c02b2de5>] __ext4_journalled_invalidatepage+0x10f/0x117 [<c02b2ded>] ? __ext4_journalled_invalidatepage+0x117/0x117 [<c027d883>] ? lock_buffer+0x36/0x36 [<c02b2dfa>] ext4_journalled_invalidatepage+0xd/0x22 [<c0229139>] do_invalidatepage+0x22/0x26 [<c0229198>] truncate_inode_page+0x5b/0x85 [<c022934b>] truncate_inode_pages_range+0x156/0x38c [<c0229592>] truncate_inode_pages+0x11/0x15 [<c022962d>] truncate_pagecache+0x55/0x71 [<c02b913b>] ext4_setattr+0x4a9/0x560 [<c01ca542>] ? current_kernel_time+0x10/0x44 [<c026c4d8>] notify_change+0x1c7/0x2be [<c0256a00>] do_truncate+0x65/0x85 [<c0226f31>] ? file_ra_state_init+0x12/0x29 - and - WARNING: CPU: 1 PID: 1331 at /usr/projects/linux/ext4/fs/jbd2/transaction.c:1396 irty_metadata+0x14a/0x1ae() ... Call Trace: [<c01b879f>] ? console_unlock+0x3a1/0x3ce [<c082cbb4>] dump_stack+0x48/0x60 [<c0178b65>] warn_slowpath_common+0x89/0xa0 [<c02ef2cf>] ? jbd2_journal_dirty_metadata+0x14a/0x1ae [<c0178bef>] warn_slowpath_null+0x14/0x18 [<c02ef2cf>] jbd2_journal_dirty_metadata+0x14a/0x1ae [<c02d8615>] __ext4_handle_dirty_metadata+0xd4/0x19d [<c02b2f44>] write_end_fn+0x40/0x53 [<c02b4a16>] ext4_walk_page_buffers+0x4e/0x6a [<c02b59e7>] ext4_writepage+0x354/0x3b8 [<c02b2f04>] ? mpage_release_unused_pages+0xd4/0xd4 [<c02b1b21>] ? wait_on_buffer+0x2c/0x2c [<c02b5a4b>] ? ext4_writepage+0x3b8/0x3b8 [<c02b5a5b>] __writepage+0x10/0x2e [<c0225956>] write_cache_pages+0x22d/0x32c [<c02b5a4b>] ? ext4_writepage+0x3b8/0x3b8 [<c02b6ee8>] ext4_writepages+0x102/0x607 [<c019adfe>] ? sched_clock_local+0x10/0x10e [<c01a8a7c>] ? __lock_is_held+0x2e/0x44 [<c01a8ad5>] ? lock_is_held+0x43/0x51 [<c0226dff>] do_writepages+0x1c/0x29 [<c0276bed>] __writeback_single_inode+0xc3/0x545 [<c0277c07>] writeback_sb_inodes+0x21f/0x36d ... Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2015-06-13 11:45:33 +08:00
put_page(page);
goto out_no_pagelock;
}
BUG_ON(!ext4_handle_valid(handle));
ext4: fix race between truncate and __ext4_journalled_writepage() The commit cf108bca465d: "ext4: Invert the locking order of page_lock and transaction start" caused __ext4_journalled_writepage() to drop the page lock before the page was written back, as part of changing the locking order to jbd2_journal_start -> page_lock. However, this introduced a potential race if there was a truncate racing with the data=journalled writeback mode. Fix this by grabbing the page lock after starting the journal handle, and then checking to see if page had gotten truncated out from under us. This fixes a number of different warnings or BUG_ON's when running xfstests generic/086 in data=journalled mode, including: jbd2_journal_dirty_metadata: vdc-8: bad jh for block 115643: transaction (ee3fe7 c0, 164), jh->b_transaction ( (null), 0), jh->b_next_transaction ( (null), 0), jlist 0 - and - kernel BUG at /usr/projects/linux/ext4/fs/jbd2/transaction.c:2200! ... Call Trace: [<c02b2ded>] ? __ext4_journalled_invalidatepage+0x117/0x117 [<c02b2de5>] __ext4_journalled_invalidatepage+0x10f/0x117 [<c02b2ded>] ? __ext4_journalled_invalidatepage+0x117/0x117 [<c027d883>] ? lock_buffer+0x36/0x36 [<c02b2dfa>] ext4_journalled_invalidatepage+0xd/0x22 [<c0229139>] do_invalidatepage+0x22/0x26 [<c0229198>] truncate_inode_page+0x5b/0x85 [<c022934b>] truncate_inode_pages_range+0x156/0x38c [<c0229592>] truncate_inode_pages+0x11/0x15 [<c022962d>] truncate_pagecache+0x55/0x71 [<c02b913b>] ext4_setattr+0x4a9/0x560 [<c01ca542>] ? current_kernel_time+0x10/0x44 [<c026c4d8>] notify_change+0x1c7/0x2be [<c0256a00>] do_truncate+0x65/0x85 [<c0226f31>] ? file_ra_state_init+0x12/0x29 - and - WARNING: CPU: 1 PID: 1331 at /usr/projects/linux/ext4/fs/jbd2/transaction.c:1396 irty_metadata+0x14a/0x1ae() ... Call Trace: [<c01b879f>] ? console_unlock+0x3a1/0x3ce [<c082cbb4>] dump_stack+0x48/0x60 [<c0178b65>] warn_slowpath_common+0x89/0xa0 [<c02ef2cf>] ? jbd2_journal_dirty_metadata+0x14a/0x1ae [<c0178bef>] warn_slowpath_null+0x14/0x18 [<c02ef2cf>] jbd2_journal_dirty_metadata+0x14a/0x1ae [<c02d8615>] __ext4_handle_dirty_metadata+0xd4/0x19d [<c02b2f44>] write_end_fn+0x40/0x53 [<c02b4a16>] ext4_walk_page_buffers+0x4e/0x6a [<c02b59e7>] ext4_writepage+0x354/0x3b8 [<c02b2f04>] ? mpage_release_unused_pages+0xd4/0xd4 [<c02b1b21>] ? wait_on_buffer+0x2c/0x2c [<c02b5a4b>] ? ext4_writepage+0x3b8/0x3b8 [<c02b5a5b>] __writepage+0x10/0x2e [<c0225956>] write_cache_pages+0x22d/0x32c [<c02b5a4b>] ? ext4_writepage+0x3b8/0x3b8 [<c02b6ee8>] ext4_writepages+0x102/0x607 [<c019adfe>] ? sched_clock_local+0x10/0x10e [<c01a8a7c>] ? __lock_is_held+0x2e/0x44 [<c01a8ad5>] ? lock_is_held+0x43/0x51 [<c0226dff>] do_writepages+0x1c/0x29 [<c0276bed>] __writeback_single_inode+0xc3/0x545 [<c0277c07>] writeback_sb_inodes+0x21f/0x36d ... Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2015-06-13 11:45:33 +08:00
lock_page(page);
put_page(page);
size = i_size_read(inode);
if (page->mapping != mapping || page_offset(page) > size) {
ext4: fix race between truncate and __ext4_journalled_writepage() The commit cf108bca465d: "ext4: Invert the locking order of page_lock and transaction start" caused __ext4_journalled_writepage() to drop the page lock before the page was written back, as part of changing the locking order to jbd2_journal_start -> page_lock. However, this introduced a potential race if there was a truncate racing with the data=journalled writeback mode. Fix this by grabbing the page lock after starting the journal handle, and then checking to see if page had gotten truncated out from under us. This fixes a number of different warnings or BUG_ON's when running xfstests generic/086 in data=journalled mode, including: jbd2_journal_dirty_metadata: vdc-8: bad jh for block 115643: transaction (ee3fe7 c0, 164), jh->b_transaction ( (null), 0), jh->b_next_transaction ( (null), 0), jlist 0 - and - kernel BUG at /usr/projects/linux/ext4/fs/jbd2/transaction.c:2200! ... Call Trace: [<c02b2ded>] ? __ext4_journalled_invalidatepage+0x117/0x117 [<c02b2de5>] __ext4_journalled_invalidatepage+0x10f/0x117 [<c02b2ded>] ? __ext4_journalled_invalidatepage+0x117/0x117 [<c027d883>] ? lock_buffer+0x36/0x36 [<c02b2dfa>] ext4_journalled_invalidatepage+0xd/0x22 [<c0229139>] do_invalidatepage+0x22/0x26 [<c0229198>] truncate_inode_page+0x5b/0x85 [<c022934b>] truncate_inode_pages_range+0x156/0x38c [<c0229592>] truncate_inode_pages+0x11/0x15 [<c022962d>] truncate_pagecache+0x55/0x71 [<c02b913b>] ext4_setattr+0x4a9/0x560 [<c01ca542>] ? current_kernel_time+0x10/0x44 [<c026c4d8>] notify_change+0x1c7/0x2be [<c0256a00>] do_truncate+0x65/0x85 [<c0226f31>] ? file_ra_state_init+0x12/0x29 - and - WARNING: CPU: 1 PID: 1331 at /usr/projects/linux/ext4/fs/jbd2/transaction.c:1396 irty_metadata+0x14a/0x1ae() ... Call Trace: [<c01b879f>] ? console_unlock+0x3a1/0x3ce [<c082cbb4>] dump_stack+0x48/0x60 [<c0178b65>] warn_slowpath_common+0x89/0xa0 [<c02ef2cf>] ? jbd2_journal_dirty_metadata+0x14a/0x1ae [<c0178bef>] warn_slowpath_null+0x14/0x18 [<c02ef2cf>] jbd2_journal_dirty_metadata+0x14a/0x1ae [<c02d8615>] __ext4_handle_dirty_metadata+0xd4/0x19d [<c02b2f44>] write_end_fn+0x40/0x53 [<c02b4a16>] ext4_walk_page_buffers+0x4e/0x6a [<c02b59e7>] ext4_writepage+0x354/0x3b8 [<c02b2f04>] ? mpage_release_unused_pages+0xd4/0xd4 [<c02b1b21>] ? wait_on_buffer+0x2c/0x2c [<c02b5a4b>] ? ext4_writepage+0x3b8/0x3b8 [<c02b5a5b>] __writepage+0x10/0x2e [<c0225956>] write_cache_pages+0x22d/0x32c [<c02b5a4b>] ? ext4_writepage+0x3b8/0x3b8 [<c02b6ee8>] ext4_writepages+0x102/0x607 [<c019adfe>] ? sched_clock_local+0x10/0x10e [<c01a8a7c>] ? __lock_is_held+0x2e/0x44 [<c01a8ad5>] ? lock_is_held+0x43/0x51 [<c0226dff>] do_writepages+0x1c/0x29 [<c0276bed>] __writeback_single_inode+0xc3/0x545 [<c0277c07>] writeback_sb_inodes+0x21f/0x36d ... Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2015-06-13 11:45:33 +08:00
/* The page got truncated from under us */
ext4_journal_stop(handle);
ret = 0;
goto out;
}
if (inline_data) {
ret = ext4_mark_inode_dirty(handle, inode);
} else {
struct buffer_head *page_bufs = page_buffers(page);
if (page->index == size >> PAGE_SHIFT)
len = size & ~PAGE_MASK;
else
len = PAGE_SIZE;
ret = ext4_walk_page_buffers(handle, inode, page_bufs, 0, len,
NULL, do_journal_get_write_access);
err = ext4_walk_page_buffers(handle, inode, page_bufs, 0, len,
NULL, write_end_fn);
}
ext4: data=journal: write-protect pages on j_submit_inode_data_buffers() This implements journal callbacks j_submit|finish_inode_data_buffers() with different behavior for data=journal: to write-protect pages under commit, preventing changes to buffers writeably mapped to userspace. If a buffer's content changes between commit's checksum calculation and write-out to disk, it can cause journal recovery/mount failures upon a kernel crash or power loss. [ 27.334874] EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, and O_DIRECT support! [ 27.339492] JBD2: Invalid checksum recovering data block 8705 in log [ 27.342716] JBD2: recovery failed [ 27.343316] EXT4-fs (loop0): error loading journal mount: /ext4: can't read superblock on /dev/loop0. In j_submit_inode_data_buffers() we write-protect the inode's pages with write_cache_pages() and redirty w/ writepage callback if needed. In j_finish_inode_data_buffers() there is nothing do to. And in order to use the callbacks, inodes are added to the inode list in transaction in __ext4_journalled_writepage() and ext4_page_mkwrite(). In ext4_page_mkwrite() we must make sure that the buffers are attached to the transaction as jbddirty with write_end_fn(), as already done in __ext4_journalled_writepage(). Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Reported-by: Dann Frazier <dann.frazier@canonical.com> Reported-by: kernel test robot <lkp@intel.com> # wbc.nr_to_write Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201006004841.600488-5-mfo@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-06 08:48:41 +08:00
if (ret == 0)
ret = err;
err = ext4_jbd2_inode_add_write(handle, inode, page_offset(page), len);
if (ret == 0)
ret = err;
EXT4_I(inode)->i_datasync_tid = handle->h_transaction->t_tid;
err = ext4_journal_stop(handle);
if (!ret)
ret = err;
ext4_set_inode_state(inode, EXT4_STATE_JDATA);
out:
ext4: fix race between truncate and __ext4_journalled_writepage() The commit cf108bca465d: "ext4: Invert the locking order of page_lock and transaction start" caused __ext4_journalled_writepage() to drop the page lock before the page was written back, as part of changing the locking order to jbd2_journal_start -> page_lock. However, this introduced a potential race if there was a truncate racing with the data=journalled writeback mode. Fix this by grabbing the page lock after starting the journal handle, and then checking to see if page had gotten truncated out from under us. This fixes a number of different warnings or BUG_ON's when running xfstests generic/086 in data=journalled mode, including: jbd2_journal_dirty_metadata: vdc-8: bad jh for block 115643: transaction (ee3fe7 c0, 164), jh->b_transaction ( (null), 0), jh->b_next_transaction ( (null), 0), jlist 0 - and - kernel BUG at /usr/projects/linux/ext4/fs/jbd2/transaction.c:2200! ... Call Trace: [<c02b2ded>] ? __ext4_journalled_invalidatepage+0x117/0x117 [<c02b2de5>] __ext4_journalled_invalidatepage+0x10f/0x117 [<c02b2ded>] ? __ext4_journalled_invalidatepage+0x117/0x117 [<c027d883>] ? lock_buffer+0x36/0x36 [<c02b2dfa>] ext4_journalled_invalidatepage+0xd/0x22 [<c0229139>] do_invalidatepage+0x22/0x26 [<c0229198>] truncate_inode_page+0x5b/0x85 [<c022934b>] truncate_inode_pages_range+0x156/0x38c [<c0229592>] truncate_inode_pages+0x11/0x15 [<c022962d>] truncate_pagecache+0x55/0x71 [<c02b913b>] ext4_setattr+0x4a9/0x560 [<c01ca542>] ? current_kernel_time+0x10/0x44 [<c026c4d8>] notify_change+0x1c7/0x2be [<c0256a00>] do_truncate+0x65/0x85 [<c0226f31>] ? file_ra_state_init+0x12/0x29 - and - WARNING: CPU: 1 PID: 1331 at /usr/projects/linux/ext4/fs/jbd2/transaction.c:1396 irty_metadata+0x14a/0x1ae() ... Call Trace: [<c01b879f>] ? console_unlock+0x3a1/0x3ce [<c082cbb4>] dump_stack+0x48/0x60 [<c0178b65>] warn_slowpath_common+0x89/0xa0 [<c02ef2cf>] ? jbd2_journal_dirty_metadata+0x14a/0x1ae [<c0178bef>] warn_slowpath_null+0x14/0x18 [<c02ef2cf>] jbd2_journal_dirty_metadata+0x14a/0x1ae [<c02d8615>] __ext4_handle_dirty_metadata+0xd4/0x19d [<c02b2f44>] write_end_fn+0x40/0x53 [<c02b4a16>] ext4_walk_page_buffers+0x4e/0x6a [<c02b59e7>] ext4_writepage+0x354/0x3b8 [<c02b2f04>] ? mpage_release_unused_pages+0xd4/0xd4 [<c02b1b21>] ? wait_on_buffer+0x2c/0x2c [<c02b5a4b>] ? ext4_writepage+0x3b8/0x3b8 [<c02b5a5b>] __writepage+0x10/0x2e [<c0225956>] write_cache_pages+0x22d/0x32c [<c02b5a4b>] ? ext4_writepage+0x3b8/0x3b8 [<c02b6ee8>] ext4_writepages+0x102/0x607 [<c019adfe>] ? sched_clock_local+0x10/0x10e [<c01a8a7c>] ? __lock_is_held+0x2e/0x44 [<c01a8ad5>] ? lock_is_held+0x43/0x51 [<c0226dff>] do_writepages+0x1c/0x29 [<c0276bed>] __writeback_single_inode+0xc3/0x545 [<c0277c07>] writeback_sb_inodes+0x21f/0x36d ... Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2015-06-13 11:45:33 +08:00
unlock_page(page);
out_no_pagelock:
brelse(inode_bh);
return ret;
}
/*
* Note that we don't need to start a transaction unless we're journaling data
* because we should have holes filled from ext4_page_mkwrite(). We even don't
* need to file the inode to the transaction's list in ordered mode because if
* we are writing back data added by write(), the inode is already there and if
* we are writing back data modified via mmap(), no one guarantees in which
* transaction the data will hit the disk. In case we are journaling data, we
* cannot start transaction directly because transaction start ranks above page
* lock so we have to do some magic.
*
* This function can get called via...
* - ext4_writepages after taking page lock (have journal handle)
* - journal_submit_inode_data_buffers (no journal handle)
* - shrink_page_list via the kswapd/direct reclaim (no journal handle)
* - grab_page_cache when doing write_begin (have journal handle)
*
* We don't do any block allocation in this function. If we have page with
* multiple blocks we need to write those buffer_heads that are mapped. This
* is important for mmaped based write. So if we do with blocksize 1K
* truncate(f, 1024);
* a = mmap(f, 0, 4096);
* a[0] = 'a';
* truncate(f, 4096);
* we have in the page first buffer_head mapped via page_mkwrite call back
* but other buffer_heads would be unmapped but dirty (dirty done via the
* do_wp_page). So writepage should write the first block. If we modify
* the mmap area beyond 1024 we will again get a page_fault and the
* page_mkwrite callback will do the block allocation and mark the
* buffer_heads mapped.
*
* We redirty the page if we have any buffer_heads that is either delay or
* unwritten in the page.
*
* We can get recursively called as show below.
*
* ext4_writepage() -> kmalloc() -> __alloc_pages() -> page_launder() ->
* ext4_writepage()
*
* But since we don't do any block allocation we should not deadlock.
* Page also have the dirty flag cleared so we don't get recurive page_lock.
*/
static int ext4_writepage(struct page *page,
struct writeback_control *wbc)
{
struct folio *folio = page_folio(page);
int ret = 0;
loff_t size;
unsigned int len;
struct buffer_head *page_bufs = NULL;
struct inode *inode = page->mapping->host;
struct ext4_io_submit io_submit;
ext4: fix data integrity sync in ordered mode When we perform a data integrity sync we tag all the dirty pages with PAGECACHE_TAG_TOWRITE at start of ext4_da_writepages. Later we check for this tag in write_cache_pages_da and creates a struct mpage_da_data containing contiguously indexed pages tagged with this tag and sync these pages with a call to mpage_da_map_and_submit. This process is done in while loop until all the PAGECACHE_TAG_TOWRITE pages are synced. We also do journal start and stop in each iteration. journal_stop could initiate journal commit which would call ext4_writepage which in turn will call ext4_bio_write_page even for delayed OR unwritten buffers. When ext4_bio_write_page is called for such buffers, even though it does not sync them but it clears the PAGECACHE_TAG_TOWRITE of the corresponding page and hence these pages are also not synced by the currently running data integrity sync. We will end up with dirty pages although sync is completed. This could cause a potential data loss when the sync call is followed by a truncate_pagecache call, which is exactly the case in collapse_range. (It will cause generic/127 failure in xfstests) To avoid this issue, we can use set_page_writeback_keepwrite instead of set_page_writeback, which doesn't clear TOWRITE tag. Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2014-05-12 20:12:25 +08:00
bool keep_towrite = false;
if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb)))) {
folio_invalidate(folio, 0, folio_size(folio));
folio_unlock(folio);
return -EIO;
}
trace_ext4_writepage(page);
size = i_size_read(inode);
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
if (page->index == size >> PAGE_SHIFT &&
!ext4_verity_in_progress(inode))
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
len = size & ~PAGE_MASK;
else
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
len = PAGE_SIZE;
/* Should never happen but for bugs in other kernel subsystems */
if (!page_has_buffers(page)) {
ext4_warning_inode(inode,
"page %lu does not have buffers attached", page->index);
ClearPageDirty(page);
unlock_page(page);
return 0;
}
page_bufs = page_buffers(page);
/*
* We cannot do block allocation or other extent handling in this
* function. If there are buffers needing that, we have to redirty
* the page. But we may reach here when we do a journal commit via
* journal_submit_inode_data_buffers() and in that case we must write
* allocated buffers to achieve data=ordered mode guarantees.
*
* Also, if there is only one buffer per page (the fs block
* size == the page size), if one buffer needs block
* allocation or needs to modify the extent tree to clear the
* unwritten flag, we know that the page can't be written at
* all, so we might as well refuse the write immediately.
* Unfortunately if the block size != page size, we can't as
* easily detect this case using ext4_walk_page_buffers(), but
* for the extremely common case, this is an optimization that
* skips a useless round trip through ext4_bio_write_page().
*/
if (ext4_walk_page_buffers(NULL, inode, page_bufs, 0, len, NULL,
ext4_bh_delay_or_unwritten)) {
redirty_page_for_writepage(wbc, page);
if ((current->flags & PF_MEMALLOC) ||
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
(inode->i_sb->s_blocksize == PAGE_SIZE)) {
/*
* For memory cleaning there's no point in writing only
* some buffers. So just bail out. Warn if we came here
* from direct reclaim.
*/
WARN_ON_ONCE((current->flags & (PF_MEMALLOC|PF_KSWAPD))
== PF_MEMALLOC);
unlock_page(page);
return 0;
}
ext4: fix data integrity sync in ordered mode When we perform a data integrity sync we tag all the dirty pages with PAGECACHE_TAG_TOWRITE at start of ext4_da_writepages. Later we check for this tag in write_cache_pages_da and creates a struct mpage_da_data containing contiguously indexed pages tagged with this tag and sync these pages with a call to mpage_da_map_and_submit. This process is done in while loop until all the PAGECACHE_TAG_TOWRITE pages are synced. We also do journal start and stop in each iteration. journal_stop could initiate journal commit which would call ext4_writepage which in turn will call ext4_bio_write_page even for delayed OR unwritten buffers. When ext4_bio_write_page is called for such buffers, even though it does not sync them but it clears the PAGECACHE_TAG_TOWRITE of the corresponding page and hence these pages are also not synced by the currently running data integrity sync. We will end up with dirty pages although sync is completed. This could cause a potential data loss when the sync call is followed by a truncate_pagecache call, which is exactly the case in collapse_range. (It will cause generic/127 failure in xfstests) To avoid this issue, we can use set_page_writeback_keepwrite instead of set_page_writeback, which doesn't clear TOWRITE tag. Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2014-05-12 20:12:25 +08:00
keep_towrite = true;
}
if (PageChecked(page) && ext4_should_journal_data(inode))
/*
* It's mmapped pagecache. Add buffers and journal it. There
* doesn't seem much point in redirtying the page here.
*/
return __ext4_journalled_writepage(page, len);
ext4_io_submit_init(&io_submit, wbc);
io_submit.io_end = ext4_init_io_end(inode, GFP_NOFS);
if (!io_submit.io_end) {
redirty_page_for_writepage(wbc, page);
unlock_page(page);
return -ENOMEM;
}
ret = ext4_bio_write_page(&io_submit, page, len, keep_towrite);
ext4_io_submit(&io_submit);
/* Drop io_end reference we got from init */
ext4_put_io_end_defer(io_submit.io_end);
return ret;
}
static int mpage_submit_page(struct mpage_da_data *mpd, struct page *page)
{
int len;
loff_t size;
int err;
BUG_ON(page->index != mpd->first_page);
clear_page_dirty_for_io(page);
/*
* We have to be very careful here! Nothing protects writeback path
* against i_size changes and the page can be writeably mapped into
* page tables. So an application can be growing i_size and writing
* data through mmap while writeback runs. clear_page_dirty_for_io()
* write-protects our page in page tables and the page cannot get
* written to again until we release page lock. So only after
* clear_page_dirty_for_io() we are safe to sample i_size for
* ext4_bio_write_page() to zero-out tail of the written page. We rely
* on the barrier provided by TestClearPageDirty in
* clear_page_dirty_for_io() to make sure i_size is really sampled only
* after page tables are updated.
*/
size = i_size_read(mpd->inode);
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
if (page->index == size >> PAGE_SHIFT &&
!ext4_verity_in_progress(mpd->inode))
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
len = size & ~PAGE_MASK;
else
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
len = PAGE_SIZE;
err = ext4_bio_write_page(&mpd->io_submit, page, len, false);
if (!err)
mpd->wbc->nr_to_write--;
mpd->first_page++;
return err;
}
#define BH_FLAGS (BIT(BH_Unwritten) | BIT(BH_Delay))
/*
* mballoc gives us at most this number of blocks...
* XXX: That seems to be only a limitation of ext4_mb_normalize_request().
* The rest of mballoc seems to handle chunks up to full group size.
*/
#define MAX_WRITEPAGES_EXTENT_LEN 2048
/*
* mpage_add_bh_to_extent - try to add bh to extent of blocks to map
*
* @mpd - extent of blocks
* @lblk - logical number of the block in the file
* @bh - buffer head we want to add to the extent
*
* The function is used to collect contig. blocks in the same state. If the
* buffer doesn't require mapping for writeback and we haven't started the
* extent of buffers to map yet, the function returns 'true' immediately - the
* caller can write the buffer right away. Otherwise the function returns true
* if the block has been added to the extent, false if the block couldn't be
* added.
*/
static bool mpage_add_bh_to_extent(struct mpage_da_data *mpd, ext4_lblk_t lblk,
struct buffer_head *bh)
{
struct ext4_map_blocks *map = &mpd->map;
/* Buffer that doesn't need mapping for writeback? */
if (!buffer_dirty(bh) || !buffer_mapped(bh) ||
(!buffer_delay(bh) && !buffer_unwritten(bh))) {
/* So far no extent to map => we write the buffer right away */
if (map->m_len == 0)
return true;
return false;
}
/* First block in the extent? */
if (map->m_len == 0) {
/* We cannot map unless handle is started... */
if (!mpd->do_map)
return false;
map->m_lblk = lblk;
map->m_len = 1;
map->m_flags = bh->b_state & BH_FLAGS;
return true;
}
/* Don't go larger than mballoc is willing to allocate */
if (map->m_len >= MAX_WRITEPAGES_EXTENT_LEN)
return false;
/* Can we merge the block to our big extent? */
if (lblk == map->m_lblk + map->m_len &&
(bh->b_state & BH_FLAGS) == map->m_flags) {
map->m_len++;
return true;
}
return false;
}
/*
* mpage_process_page_bufs - submit page buffers for IO or add them to extent
*
* @mpd - extent of blocks for mapping
* @head - the first buffer in the page
* @bh - buffer we should start processing from
* @lblk - logical number of the block in the file corresponding to @bh
*
* Walk through page buffers from @bh upto @head (exclusive) and either submit
* the page for IO if all buffers in this page were mapped and there's no
* accumulated extent of buffers to map or add buffers in the page to the
* extent of buffers to map. The function returns 1 if the caller can continue
* by processing the next page, 0 if it should stop adding buffers to the
* extent to map because we cannot extend it anymore. It can also return value
* < 0 in case of error during IO submission.
*/
static int mpage_process_page_bufs(struct mpage_da_data *mpd,
struct buffer_head *head,
struct buffer_head *bh,
ext4_lblk_t lblk)
{
struct inode *inode = mpd->inode;
int err;
ext4_lblk_t blocks = (i_size_read(inode) + i_blocksize(inode) - 1)
>> inode->i_blkbits;
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
if (ext4_verity_in_progress(inode))
blocks = EXT_MAX_BLOCKS;
do {
BUG_ON(buffer_locked(bh));
if (lblk >= blocks || !mpage_add_bh_to_extent(mpd, lblk, bh)) {
/* Found extent to map? */
if (mpd->map.m_len)
return 0;
/* Buffer needs mapping and handle is not started? */
if (!mpd->do_map)
return 0;
/* Everything mapped so far and we hit EOF */
break;
}
} while (lblk++, (bh = bh->b_this_page) != head);
/* So far everything mapped? Submit the page for IO. */
if (mpd->map.m_len == 0) {
err = mpage_submit_page(mpd, head->b_page);
if (err < 0)
return err;
}
if (lblk >= blocks) {
mpd->scanned_until_end = 1;
return 0;
}
return 1;
}
/*
* mpage_process_page - update page buffers corresponding to changed extent and
* may submit fully mapped page for IO
*
* @mpd - description of extent to map, on return next extent to map
* @m_lblk - logical block mapping.
* @m_pblk - corresponding physical mapping.
* @map_bh - determines on return whether this page requires any further
* mapping or not.
* Scan given page buffers corresponding to changed extent and update buffer
* state according to new extent state.
* We map delalloc buffers to their physical location, clear unwritten bits.
* If the given page is not fully mapped, we update @map to the next extent in
* the given page that needs mapping & return @map_bh as true.
*/
static int mpage_process_page(struct mpage_da_data *mpd, struct page *page,
ext4_lblk_t *m_lblk, ext4_fsblk_t *m_pblk,
bool *map_bh)
{
struct buffer_head *head, *bh;
ext4_io_end_t *io_end = mpd->io_submit.io_end;
ext4_lblk_t lblk = *m_lblk;
ext4_fsblk_t pblock = *m_pblk;
int err = 0;
int blkbits = mpd->inode->i_blkbits;
ssize_t io_end_size = 0;
struct ext4_io_end_vec *io_end_vec = ext4_last_io_end_vec(io_end);
bh = head = page_buffers(page);
do {
if (lblk < mpd->map.m_lblk)
continue;
if (lblk >= mpd->map.m_lblk + mpd->map.m_len) {
/*
* Buffer after end of mapped extent.
* Find next buffer in the page to map.
*/
mpd->map.m_len = 0;
mpd->map.m_flags = 0;
io_end_vec->size += io_end_size;
err = mpage_process_page_bufs(mpd, head, bh, lblk);
if (err > 0)
err = 0;
if (!err && mpd->map.m_len && mpd->map.m_lblk > lblk) {
io_end_vec = ext4_alloc_io_end_vec(io_end);
if (IS_ERR(io_end_vec)) {
err = PTR_ERR(io_end_vec);
goto out;
}
io_end_vec->offset = (loff_t)mpd->map.m_lblk << blkbits;
}
*map_bh = true;
goto out;
}
if (buffer_delay(bh)) {
clear_buffer_delay(bh);
bh->b_blocknr = pblock++;
}
clear_buffer_unwritten(bh);
io_end_size += (1 << blkbits);
} while (lblk++, (bh = bh->b_this_page) != head);
io_end_vec->size += io_end_size;
*map_bh = false;
out:
*m_lblk = lblk;
*m_pblk = pblock;
return err;
}
/*
* mpage_map_buffers - update buffers corresponding to changed extent and
* submit fully mapped pages for IO
*
* @mpd - description of extent to map, on return next extent to map
*
* Scan buffers corresponding to changed extent (we expect corresponding pages
* to be already locked) and update buffer state according to new extent state.
* We map delalloc buffers to their physical location, clear unwritten bits,
* and mark buffers as uninit when we perform writes to unwritten extents
* and do extent conversion after IO is finished. If the last page is not fully
* mapped, we update @map to the next extent in the last page that needs
* mapping. Otherwise we submit the page for IO.
*/
static int mpage_map_and_submit_buffers(struct mpage_da_data *mpd)
{
struct pagevec pvec;
int nr_pages, i;
struct inode *inode = mpd->inode;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
int bpp_bits = PAGE_SHIFT - inode->i_blkbits;
pgoff_t start, end;
ext4_lblk_t lblk;
ext4_fsblk_t pblock;
int err;
bool map_bh = false;
start = mpd->map.m_lblk >> bpp_bits;
end = (mpd->map.m_lblk + mpd->map.m_len - 1) >> bpp_bits;
lblk = start << bpp_bits;
pblock = mpd->map.m_pblk;
pagevec_init(&pvec);
while (start <= end) {
nr_pages = pagevec_lookup_range(&pvec, inode->i_mapping,
&start, end);
if (nr_pages == 0)
break;
for (i = 0; i < nr_pages; i++) {
struct page *page = pvec.pages[i];
err = mpage_process_page(mpd, page, &lblk, &pblock,
&map_bh);
/*
* If map_bh is true, means page may require further bh
* mapping, or maybe the page was submitted for IO.
* So we return to call further extent mapping.
*/
if (err < 0 || map_bh)
goto out;
/* Page fully mapped - let IO run! */
err = mpage_submit_page(mpd, page);
if (err < 0)
goto out;
}
pagevec_release(&pvec);
}
/* Extent fully mapped and matches with page boundary. We are done. */
mpd->map.m_len = 0;
mpd->map.m_flags = 0;
return 0;
out:
pagevec_release(&pvec);
return err;
}
static int mpage_map_one_extent(handle_t *handle, struct mpage_da_data *mpd)
{
struct inode *inode = mpd->inode;
struct ext4_map_blocks *map = &mpd->map;
int get_blocks_flags;
int err, dioread_nolock;
trace_ext4_da_write_pages_extent(inode, map);
/*
* Call ext4_map_blocks() to allocate any delayed allocation blocks, or
* to convert an unwritten extent to be initialized (in the case
* where we have written into one or more preallocated blocks). It is
* possible that we're going to need more metadata blocks than
* previously reserved. However we must not fail because we're in
* writeback and there is nothing we can do about it so it might result
* in data loss. So use reserved blocks to allocate metadata if
* possible.
*
* We pass in the magic EXT4_GET_BLOCKS_DELALLOC_RESERVE if
* the blocks in question are delalloc blocks. This indicates
* that the blocks and quotas has already been checked when
* the data was copied into the page cache.
*/
get_blocks_flags = EXT4_GET_BLOCKS_CREATE |
EXT4_GET_BLOCKS_METADATA_NOFAIL |
EXT4_GET_BLOCKS_IO_SUBMIT;
dioread_nolock = ext4_should_dioread_nolock(inode);
if (dioread_nolock)
get_blocks_flags |= EXT4_GET_BLOCKS_IO_CREATE_EXT;
if (map->m_flags & BIT(BH_Delay))
get_blocks_flags |= EXT4_GET_BLOCKS_DELALLOC_RESERVE;
err = ext4_map_blocks(handle, inode, map, get_blocks_flags);
if (err < 0)
return err;
if (dioread_nolock && (map->m_flags & EXT4_MAP_UNWRITTEN)) {
if (!mpd->io_submit.io_end->handle &&
ext4_handle_valid(handle)) {
mpd->io_submit.io_end->handle = handle->h_rsv_handle;
handle->h_rsv_handle = NULL;
}
ext4_set_io_unwritten_flag(inode, mpd->io_submit.io_end);
}
BUG_ON(map->m_len == 0);
return 0;
}
/*
* mpage_map_and_submit_extent - map extent starting at mpd->lblk of length
* mpd->len and submit pages underlying it for IO
*
* @handle - handle for journal operations
* @mpd - extent to map
* @give_up_on_write - we set this to true iff there is a fatal error and there
* is no hope of writing the data. The caller should discard
* dirty pages to avoid infinite loops.
*
* The function maps extent starting at mpd->lblk of length mpd->len. If it is
* delayed, blocks are allocated, if it is unwritten, we may need to convert
* them to initialized or split the described range from larger unwritten
* extent. Note that we need not map all the described range since allocation
* can return less blocks or the range is covered by more unwritten extents. We
* cannot map more because we are limited by reserved transaction credits. On
* the other hand we always make sure that the last touched page is fully
* mapped so that it can be written out (and thus forward progress is
* guaranteed). After mapping we submit all mapped pages for IO.
*/
static int mpage_map_and_submit_extent(handle_t *handle,
struct mpage_da_data *mpd,
bool *give_up_on_write)
{
struct inode *inode = mpd->inode;
struct ext4_map_blocks *map = &mpd->map;
int err;
loff_t disksize;
int progress = 0;
ext4_io_end_t *io_end = mpd->io_submit.io_end;
struct ext4_io_end_vec *io_end_vec;
io_end_vec = ext4_alloc_io_end_vec(io_end);
if (IS_ERR(io_end_vec))
return PTR_ERR(io_end_vec);
io_end_vec->offset = ((loff_t)map->m_lblk) << inode->i_blkbits;
do {
err = mpage_map_one_extent(handle, mpd);
if (err < 0) {
struct super_block *sb = inode->i_sb;
if (ext4_forced_shutdown(EXT4_SB(sb)) ||
ext4_test_mount_flag(sb, EXT4_MF_FS_ABORTED))
goto invalidate_dirty_pages;
/*
* Let the uper layers retry transient errors.
* In the case of ENOSPC, if ext4_count_free_blocks()
* is non-zero, a commit should free up blocks.
*/
if ((err == -ENOMEM) ||
(err == -ENOSPC && ext4_count_free_clusters(sb))) {
if (progress)
goto update_disksize;
return err;
}
ext4_msg(sb, KERN_CRIT,
"Delayed block allocation failed for "
"inode %lu at logical offset %llu with"
" max blocks %u with error %d",
inode->i_ino,
(unsigned long long)map->m_lblk,
(unsigned)map->m_len, -err);
ext4_msg(sb, KERN_CRIT,
"This should not happen!! Data will "
"be lost\n");
if (err == -ENOSPC)
ext4_print_free_blocks(inode);
invalidate_dirty_pages:
*give_up_on_write = true;
return err;
}
progress = 1;
/*
* Update buffer state, submit mapped pages, and get us new
* extent to map
*/
err = mpage_map_and_submit_buffers(mpd);
if (err < 0)
goto update_disksize;
} while (map->m_len);
update_disksize:
/*
* Update on-disk size after IO is submitted. Races with
* truncate are avoided by checking i_size under i_data_sem.
*/
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
disksize = ((loff_t)mpd->first_page) << PAGE_SHIFT;
ext4: fix a data race in EXT4_I(inode)->i_disksize EXT4_I(inode)->i_disksize could be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in ext4_write_end [ext4] / ext4_writepages [ext4] write to 0xffff91c6713b00f8 of 8 bytes by task 49268 on cpu 127: ext4_write_end+0x4e3/0x750 [ext4] ext4_update_i_disksize at fs/ext4/ext4.h:3032 (inlined by) ext4_update_inode_size at fs/ext4/ext4.h:3046 (inlined by) ext4_write_end at fs/ext4/inode.c:1287 generic_perform_write+0x208/0x2a0 ext4_buffered_write_iter+0x11f/0x210 [ext4] ext4_file_write_iter+0xce/0x9e0 [ext4] new_sync_write+0x29c/0x3b0 __vfs_write+0x92/0xa0 vfs_write+0x103/0x260 ksys_write+0x9d/0x130 __x64_sys_write+0x4c/0x60 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe read to 0xffff91c6713b00f8 of 8 bytes by task 24872 on cpu 37: ext4_writepages+0x10ac/0x1d00 [ext4] mpage_map_and_submit_extent at fs/ext4/inode.c:2468 (inlined by) ext4_writepages at fs/ext4/inode.c:2772 do_writepages+0x5e/0x130 __writeback_single_inode+0xeb/0xb20 writeback_sb_inodes+0x429/0x900 __writeback_inodes_wb+0xc4/0x150 wb_writeback+0x4bd/0x870 wb_workfn+0x6b4/0x960 process_one_work+0x54c/0xbe0 worker_thread+0x80/0x650 kthread+0x1e0/0x200 ret_from_fork+0x27/0x50 Reported by Kernel Concurrency Sanitizer on: CPU: 37 PID: 24872 Comm: kworker/u261:2 Tainted: G W O L 5.5.0-next-20200204+ #5 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 Workqueue: writeback wb_workfn (flush-7:0) Since only the read is operating as lockless (outside of the "i_data_sem"), load tearing could introduce a logic bug. Fix it by adding READ_ONCE() for the read and WRITE_ONCE() for the write. Signed-off-by: Qian Cai <cai@lca.pw> Link: https://lore.kernel.org/r/1581085751-31793-1-git-send-email-cai@lca.pw Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2020-02-07 22:29:11 +08:00
if (disksize > READ_ONCE(EXT4_I(inode)->i_disksize)) {
int err2;
loff_t i_size;
down_write(&EXT4_I(inode)->i_data_sem);
i_size = i_size_read(inode);
if (disksize > i_size)
disksize = i_size;
if (disksize > EXT4_I(inode)->i_disksize)
EXT4_I(inode)->i_disksize = disksize;
up_write(&EXT4_I(inode)->i_data_sem);
err2 = ext4_mark_inode_dirty(handle, inode);
if (err2) {
ext4_error_err(inode->i_sb, -err2,
"Failed to mark inode %lu dirty",
inode->i_ino);
}
if (!err)
err = err2;
}
return err;
}
/*
* Calculate the total number of credits to reserve for one writepages
* iteration. This is called from ext4_writepages(). We map an extent of
* up to MAX_WRITEPAGES_EXTENT_LEN blocks and then we go on and finish mapping
* the last partial page. So in total we can map MAX_WRITEPAGES_EXTENT_LEN +
* bpp - 1 blocks in bpp different extents.
*/
static int ext4_da_writepages_trans_blocks(struct inode *inode)
{
int bpp = ext4_journal_blocks_per_page(inode);
return ext4_meta_trans_blocks(inode,
MAX_WRITEPAGES_EXTENT_LEN + bpp - 1, bpp);
}
/*
* mpage_prepare_extent_to_map - find & lock contiguous range of dirty pages
* and underlying extent to map
*
* @mpd - where to look for pages
*
* Walk dirty pages in the mapping. If they are fully mapped, submit them for
* IO immediately. When we find a page which isn't mapped we start accumulating
* extent of buffers underlying these pages that needs mapping (formed by
* either delayed or unwritten buffers). We also lock the pages containing
* these buffers. The extent found is returned in @mpd structure (starting at
* mpd->lblk with length mpd->len blocks).
*
* Note that this function can attach bios to one io_end structure which are
* neither logically nor physically contiguous. Although it may seem as an
* unnecessary complication, it is actually inevitable in blocksize < pagesize
* case as we need to track IO to all buffers underlying a page in one io_end.
*/
static int mpage_prepare_extent_to_map(struct mpage_da_data *mpd)
{
struct address_space *mapping = mpd->inode->i_mapping;
struct pagevec pvec;
unsigned int nr_pages;
long left = mpd->wbc->nr_to_write;
pgoff_t index = mpd->first_page;
pgoff_t end = mpd->last_page;
xa_mark_t tag;
int i, err = 0;
int blkbits = mpd->inode->i_blkbits;
ext4_lblk_t lblk;
struct buffer_head *head;
if (mpd->wbc->sync_mode == WB_SYNC_ALL || mpd->wbc->tagged_writepages)
tag = PAGECACHE_TAG_TOWRITE;
else
tag = PAGECACHE_TAG_DIRTY;
pagevec_init(&pvec);
mpd->map.m_len = 0;
mpd->next_page = index;
while (index <= end) {
nr_pages = pagevec_lookup_range_tag(&pvec, mapping, &index, end,
tag);
if (nr_pages == 0)
break;
for (i = 0; i < nr_pages; i++) {
struct page *page = pvec.pages[i];
/*
* Accumulated enough dirty pages? This doesn't apply
* to WB_SYNC_ALL mode. For integrity sync we have to
* keep going because someone may be concurrently
* dirtying pages, and we might have synced a lot of
* newly appeared dirty pages, but have not synced all
* of the old dirty pages.
*/
if (mpd->wbc->sync_mode == WB_SYNC_NONE && left <= 0)
goto out;
/* If we can't merge this page, we are done. */
if (mpd->map.m_len > 0 && mpd->next_page != page->index)
goto out;
lock_page(page);
/*
* If the page is no longer dirty, or its mapping no
* longer corresponds to inode we are writing (which
* means it has been truncated or invalidated), or the
* page is already under writeback and we are not doing
* a data integrity writeback, skip the page
*/
if (!PageDirty(page) ||
(PageWriteback(page) &&
(mpd->wbc->sync_mode == WB_SYNC_NONE)) ||
unlikely(page->mapping != mapping)) {
unlock_page(page);
continue;
}
wait_on_page_writeback(page);
BUG_ON(PageWriteback(page));
/*
* Should never happen but for buggy code in
* other subsystems that call
* set_page_dirty() without properly warning
* the file system first. See [1] for more
* information.
*
* [1] https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz
*/
if (!page_has_buffers(page)) {
ext4_warning_inode(mpd->inode, "page %lu does not have buffers attached", page->index);
ClearPageDirty(page);
unlock_page(page);
continue;
}
if (mpd->map.m_len == 0)
mpd->first_page = page->index;
mpd->next_page = page->index + 1;
/* Add all dirty buffers to mpd */
lblk = ((ext4_lblk_t)page->index) <<
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
(PAGE_SHIFT - blkbits);
head = page_buffers(page);
err = mpage_process_page_bufs(mpd, head, head, lblk);
if (err <= 0)
goto out;
err = 0;
left--;
}
pagevec_release(&pvec);
cond_resched();
}
mpd->scanned_until_end = 1;
return 0;
out:
pagevec_release(&pvec);
return err;
}
static int ext4_writepages(struct address_space *mapping,
struct writeback_control *wbc)
{
pgoff_t writeback_index = 0;
long nr_to_write = wbc->nr_to_write;
int range_whole = 0;
int cycled = 1;
handle_t *handle = NULL;
struct mpage_da_data mpd;
struct inode *inode = mapping->host;
int needed_blocks, rsv_blocks = 0, ret = 0;
struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb);
struct blk_plug plug;
bool give_up_on_write = false;
if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb))))
return -EIO;
percpu_down_read(&sbi->s_writepages_rwsem);
trace_ext4_writepages(inode, wbc);
/*
* No pages to write? This is mainly a kludge to avoid starting
* a transaction for special inodes like journal inode on last iput()
* because that could violate lock ordering on umount
*/
if (!mapping->nrpages || !mapping_tagged(mapping, PAGECACHE_TAG_DIRTY))
goto out_writepages;
if (ext4_should_journal_data(inode)) {
ret = generic_writepages(mapping, wbc);
goto out_writepages;
}
/*
* If the filesystem has aborted, it is read-only, so return
* right away instead of dumping stack traces later on that
* will obscure the real source of the problem. We test
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-28 05:05:09 +08:00
* EXT4_MF_FS_ABORTED instead of sb->s_flag's SB_RDONLY because
* the latter could be true if the filesystem is mounted
* read-only, and in that case, ext4_writepages should
* *never* be called, so if that ever happens, we would want
* the stack trace.
*/
if (unlikely(ext4_forced_shutdown(EXT4_SB(mapping->host->i_sb)) ||
ext4_test_mount_flag(inode->i_sb, EXT4_MF_FS_ABORTED))) {
ret = -EROFS;
goto out_writepages;
}
/*
* If we have inline data and arrive here, it means that
* we will soon create the block for the 1st page, so
* we'd better clear the inline data here.
*/
if (ext4_has_inline_data(inode)) {
/* Just inode will be modified... */
handle = ext4_journal_start(inode, EXT4_HT_INODE, 1);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
goto out_writepages;
}
BUG_ON(ext4_test_inode_state(inode,
EXT4_STATE_MAY_INLINE_DATA));
ext4_destroy_inline_data(handle, inode);
ext4_journal_stop(handle);
}
if (ext4_should_dioread_nolock(inode)) {
/*
* We may need to convert up to one extent per block in
* the page and we may dirty the inode.
*/
rsv_blocks = 1 + ext4_chunk_trans_blocks(inode,
PAGE_SIZE >> inode->i_blkbits);
}
if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
range_whole = 1;
if (wbc->range_cyclic) {
writeback_index = mapping->writeback_index;
if (writeback_index)
cycled = 0;
mpd.first_page = writeback_index;
mpd.last_page = -1;
} else {
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
mpd.first_page = wbc->range_start >> PAGE_SHIFT;
mpd.last_page = wbc->range_end >> PAGE_SHIFT;
}
mpd.inode = inode;
mpd.wbc = wbc;
ext4_io_submit_init(&mpd.io_submit, wbc);
retry:
if (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages)
tag_pages_for_writeback(mapping, mpd.first_page, mpd.last_page);
blk_start_plug(&plug);
/*
* First writeback pages that don't need mapping - we can avoid
* starting a transaction unnecessarily and also avoid being blocked
* in the block layer on device congestion while having transaction
* started.
*/
mpd.do_map = 0;
mpd.scanned_until_end = 0;
mpd.io_submit.io_end = ext4_init_io_end(inode, GFP_KERNEL);
if (!mpd.io_submit.io_end) {
ret = -ENOMEM;
goto unplug;
}
ret = mpage_prepare_extent_to_map(&mpd);
/* Unlock pages we didn't use */
mpage_release_unused_pages(&mpd, false);
/* Submit prepared bio */
ext4_io_submit(&mpd.io_submit);
ext4_put_io_end_defer(mpd.io_submit.io_end);
mpd.io_submit.io_end = NULL;
if (ret < 0)
goto unplug;
while (!mpd.scanned_until_end && wbc->nr_to_write > 0) {
/* For each extent of pages we use new io_end */
mpd.io_submit.io_end = ext4_init_io_end(inode, GFP_KERNEL);
if (!mpd.io_submit.io_end) {
ret = -ENOMEM;
break;
}
/*
* We have two constraints: We find one extent to map and we
* must always write out whole page (makes a difference when
* blocksize < pagesize) so that we don't block on IO when we
* try to write out the rest of the page. Journalled mode is
* not supported by delalloc.
*/
BUG_ON(ext4_should_journal_data(inode));
needed_blocks = ext4_da_writepages_trans_blocks(inode);
/* start a new transaction */
handle = ext4_journal_start_with_reserve(inode,
EXT4_HT_WRITE_PAGE, needed_blocks, rsv_blocks);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
ext4_msg(inode->i_sb, KERN_CRIT, "%s: jbd2_start: "
"%ld pages, ino %lu; err %d", __func__,
wbc->nr_to_write, inode->i_ino, ret);
/* Release allocated io_end */
ext4_put_io_end(mpd.io_submit.io_end);
mpd.io_submit.io_end = NULL;
break;
}
mpd.do_map = 1;
trace_ext4_da_write_pages(inode, mpd.first_page, mpd.wbc);
ret = mpage_prepare_extent_to_map(&mpd);
if (!ret && mpd.map.m_len)
ret = mpage_map_and_submit_extent(handle, &mpd,
&give_up_on_write);
/*
* Caution: If the handle is synchronous,
* ext4_journal_stop() can wait for transaction commit
* to finish which may depend on writeback of pages to
* complete or on page lock to be released. In that
* case, we have to wait until after we have
* submitted all the IO, released page locks we hold,
* and dropped io_end reference (for extent conversion
* to be able to complete) before stopping the handle.
*/
if (!ext4_handle_valid(handle) || handle->h_sync == 0) {
ext4_journal_stop(handle);
handle = NULL;
mpd.do_map = 0;
}
/* Unlock pages we didn't use */
mpage_release_unused_pages(&mpd, give_up_on_write);
/* Submit prepared bio */
ext4_io_submit(&mpd.io_submit);
/*
* Drop our io_end reference we got from init. We have
* to be careful and use deferred io_end finishing if
* we are still holding the transaction as we can
* release the last reference to io_end which may end
* up doing unwritten extent conversion.
*/
if (handle) {
ext4_put_io_end_defer(mpd.io_submit.io_end);
ext4_journal_stop(handle);
} else
ext4_put_io_end(mpd.io_submit.io_end);
mpd.io_submit.io_end = NULL;
if (ret == -ENOSPC && sbi->s_journal) {
/*
* Commit the transaction which would
* free blocks released in the transaction
* and try again
*/
jbd2_journal_force_commit_nested(sbi->s_journal);
ret = 0;
continue;
}
/* Fatal error - ENOMEM, EIO... */
if (ret)
break;
}
unplug:
blk_finish_plug(&plug);
if (!ret && !cycled && wbc->nr_to_write > 0) {
cycled = 1;
mpd.last_page = writeback_index - 1;
mpd.first_page = 0;
goto retry;
}
/* Update index */
if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0))
/*
* Set the writeback_index so that range_cyclic
* mode will write it back later
*/
mapping->writeback_index = mpd.first_page;
out_writepages:
trace_ext4_writepages_result(inode, wbc, ret,
nr_to_write - wbc->nr_to_write);
percpu_up_read(&sbi->s_writepages_rwsem);
return ret;
}
static int ext4_dax_writepages(struct address_space *mapping,
struct writeback_control *wbc)
{
int ret;
long nr_to_write = wbc->nr_to_write;
struct inode *inode = mapping->host;
struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb);
if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb))))
return -EIO;
percpu_down_read(&sbi->s_writepages_rwsem);
trace_ext4_writepages(inode, wbc);
ret = dax_writeback_mapping_range(mapping, sbi->s_daxdev, wbc);
trace_ext4_writepages_result(inode, wbc, ret,
nr_to_write - wbc->nr_to_write);
percpu_up_read(&sbi->s_writepages_rwsem);
return ret;
}
static int ext4_nonda_switch(struct super_block *sb)
{
s64 free_clusters, dirty_clusters;
struct ext4_sb_info *sbi = EXT4_SB(sb);
/*
* switch to non delalloc mode if we are running low
* on free block. The free block accounting via percpu
* counters can get slightly wrong with percpu_counter_batch getting
* accumulated on each CPU without updating global counters
* Delalloc need an accurate free block accounting. So switch
* to non delalloc when we are near to error range.
*/
free_clusters =
percpu_counter_read_positive(&sbi->s_freeclusters_counter);
dirty_clusters =
percpu_counter_read_positive(&sbi->s_dirtyclusters_counter);
ext4: fix potential deadlock in ext4_nonda_switch() In ext4_nonda_switch(), if the file system is getting full we used to call writeback_inodes_sb_if_idle(). The problem is that we can be holding i_mutex already, and this causes a potential deadlock when writeback_inodes_sb_if_idle() when it tries to take s_umount. (See lockdep output below). As it turns out we don't need need to hold s_umount; the fact that we are in the middle of the write(2) system call will keep the superblock pinned. Unfortunately writeback_inodes_sb() checks to make sure s_umount is taken, and the VFS uses a different mechanism for making sure the file system doesn't get unmounted out from under us. The simplest way of dealing with this is to just simply grab s_umount using a trylock, and skip kicking the writeback flusher thread in the very unlikely case that we can't take a read lock on s_umount without blocking. Also, we now check the cirteria for kicking the writeback thread before we decide to whether to fall back to non-delayed writeback, so if there are any outstanding delayed allocation writes, we try to get them resolved as soon as possible. [ INFO: possible circular locking dependency detected ] 3.6.0-rc1-00042-gce894ca #367 Not tainted ------------------------------------------------------- dd/8298 is trying to acquire lock: (&type->s_umount_key#18){++++..}, at: [<c02277d4>] writeback_inodes_sb_if_idle+0x28/0x46 but task is already holding lock: (&sb->s_type->i_mutex_key#8){+.+...}, at: [<c01ddcce>] generic_file_aio_write+0x5f/0xd3 which lock already depends on the new lock. 2 locks held by dd/8298: #0: (sb_writers#2){.+.+.+}, at: [<c01ddcc5>] generic_file_aio_write+0x56/0xd3 #1: (&sb->s_type->i_mutex_key#8){+.+...}, at: [<c01ddcce>] generic_file_aio_write+0x5f/0xd3 stack backtrace: Pid: 8298, comm: dd Not tainted 3.6.0-rc1-00042-gce894ca #367 Call Trace: [<c015b79c>] ? console_unlock+0x345/0x372 [<c06d62a1>] print_circular_bug+0x190/0x19d [<c019906c>] __lock_acquire+0x86d/0xb6c [<c01999db>] ? mark_held_locks+0x5c/0x7b [<c0199724>] lock_acquire+0x66/0xb9 [<c02277d4>] ? writeback_inodes_sb_if_idle+0x28/0x46 [<c06db935>] down_read+0x28/0x58 [<c02277d4>] ? writeback_inodes_sb_if_idle+0x28/0x46 [<c02277d4>] writeback_inodes_sb_if_idle+0x28/0x46 [<c026f3b2>] ext4_nonda_switch+0xe1/0xf4 [<c0271ece>] ext4_da_write_begin+0x27/0x193 [<c01dcdb0>] generic_file_buffered_write+0xc8/0x1bb [<c01ddc47>] __generic_file_aio_write+0x1dd/0x205 [<c01ddce7>] generic_file_aio_write+0x78/0xd3 [<c026d336>] ext4_file_write+0x480/0x4a6 [<c0198c1d>] ? __lock_acquire+0x41e/0xb6c [<c0180944>] ? sched_clock_cpu+0x11a/0x13e [<c01967e9>] ? trace_hardirqs_off+0xb/0xd [<c018099f>] ? local_clock+0x37/0x4e [<c0209f2c>] do_sync_write+0x67/0x9d [<c0209ec5>] ? wait_on_retry_sync_kiocb+0x44/0x44 [<c020a7b9>] vfs_write+0x7b/0xe6 [<c020a9a6>] sys_write+0x3b/0x64 [<c06dd4bd>] syscall_call+0x7/0xb Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2012-09-20 10:42:36 +08:00
/*
* Start pushing delalloc when 1/2 of free blocks are dirty.
*/
if (dirty_clusters && (free_clusters < 2 * dirty_clusters))
try_to_writeback_inodes_sb(sb, WB_REASON_FS_FREE_SPACE);
ext4: fix potential deadlock in ext4_nonda_switch() In ext4_nonda_switch(), if the file system is getting full we used to call writeback_inodes_sb_if_idle(). The problem is that we can be holding i_mutex already, and this causes a potential deadlock when writeback_inodes_sb_if_idle() when it tries to take s_umount. (See lockdep output below). As it turns out we don't need need to hold s_umount; the fact that we are in the middle of the write(2) system call will keep the superblock pinned. Unfortunately writeback_inodes_sb() checks to make sure s_umount is taken, and the VFS uses a different mechanism for making sure the file system doesn't get unmounted out from under us. The simplest way of dealing with this is to just simply grab s_umount using a trylock, and skip kicking the writeback flusher thread in the very unlikely case that we can't take a read lock on s_umount without blocking. Also, we now check the cirteria for kicking the writeback thread before we decide to whether to fall back to non-delayed writeback, so if there are any outstanding delayed allocation writes, we try to get them resolved as soon as possible. [ INFO: possible circular locking dependency detected ] 3.6.0-rc1-00042-gce894ca #367 Not tainted ------------------------------------------------------- dd/8298 is trying to acquire lock: (&type->s_umount_key#18){++++..}, at: [<c02277d4>] writeback_inodes_sb_if_idle+0x28/0x46 but task is already holding lock: (&sb->s_type->i_mutex_key#8){+.+...}, at: [<c01ddcce>] generic_file_aio_write+0x5f/0xd3 which lock already depends on the new lock. 2 locks held by dd/8298: #0: (sb_writers#2){.+.+.+}, at: [<c01ddcc5>] generic_file_aio_write+0x56/0xd3 #1: (&sb->s_type->i_mutex_key#8){+.+...}, at: [<c01ddcce>] generic_file_aio_write+0x5f/0xd3 stack backtrace: Pid: 8298, comm: dd Not tainted 3.6.0-rc1-00042-gce894ca #367 Call Trace: [<c015b79c>] ? console_unlock+0x345/0x372 [<c06d62a1>] print_circular_bug+0x190/0x19d [<c019906c>] __lock_acquire+0x86d/0xb6c [<c01999db>] ? mark_held_locks+0x5c/0x7b [<c0199724>] lock_acquire+0x66/0xb9 [<c02277d4>] ? writeback_inodes_sb_if_idle+0x28/0x46 [<c06db935>] down_read+0x28/0x58 [<c02277d4>] ? writeback_inodes_sb_if_idle+0x28/0x46 [<c02277d4>] writeback_inodes_sb_if_idle+0x28/0x46 [<c026f3b2>] ext4_nonda_switch+0xe1/0xf4 [<c0271ece>] ext4_da_write_begin+0x27/0x193 [<c01dcdb0>] generic_file_buffered_write+0xc8/0x1bb [<c01ddc47>] __generic_file_aio_write+0x1dd/0x205 [<c01ddce7>] generic_file_aio_write+0x78/0xd3 [<c026d336>] ext4_file_write+0x480/0x4a6 [<c0198c1d>] ? __lock_acquire+0x41e/0xb6c [<c0180944>] ? sched_clock_cpu+0x11a/0x13e [<c01967e9>] ? trace_hardirqs_off+0xb/0xd [<c018099f>] ? local_clock+0x37/0x4e [<c0209f2c>] do_sync_write+0x67/0x9d [<c0209ec5>] ? wait_on_retry_sync_kiocb+0x44/0x44 [<c020a7b9>] vfs_write+0x7b/0xe6 [<c020a9a6>] sys_write+0x3b/0x64 [<c06dd4bd>] syscall_call+0x7/0xb Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2012-09-20 10:42:36 +08:00
if (2 * free_clusters < 3 * dirty_clusters ||
free_clusters < (dirty_clusters + EXT4_FREECLUSTERS_WATERMARK)) {
/*
* free block count is less than 150% of dirty blocks
* or free blocks is less than watermark
*/
return 1;
}
return 0;
}
static int ext4_da_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len,
struct page **pagep, void **fsdata)
{
int ret, retries = 0;
struct page *page;
pgoff_t index;
struct inode *inode = mapping->host;
if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb))))
return -EIO;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
index = pos >> PAGE_SHIFT;
if (ext4_nonda_switch(inode->i_sb) || ext4_verity_in_progress(inode)) {
*fsdata = (void *)FALL_BACK_TO_NONDELALLOC;
return ext4_write_begin(file, mapping, pos,
len, pagep, fsdata);
}
*fsdata = (void *)0;
trace_ext4_da_write_begin(inode, pos, len);
if (ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) {
ret = ext4_da_write_inline_data_begin(mapping, inode, pos, len,
pagep, fsdata);
if (ret < 0)
return ret;
if (ret == 1)
return 0;
}
retry:
page = grab_cache_page_write_begin(mapping, index);
if (!page)
return -ENOMEM;
/* In case writeback began while the page was unlocked */
wait_for_stable_page(page);
#ifdef CONFIG_FS_ENCRYPTION
ret = ext4_block_write_begin(page, pos, len,
ext4_da_get_block_prep);
#else
ret = __block_write_begin(page, pos, len, ext4_da_get_block_prep);
#endif
if (ret < 0) {
unlock_page(page);
put_page(page);
/*
* block_write_begin may have instantiated a few blocks
* outside i_size. Trim these off again. Don't need
* i_size_read because we hold inode lock.
*/
if (pos + len > inode->i_size)
ext4_truncate_failed_write(inode);
if (ret == -ENOSPC &&
ext4_should_retry_alloc(inode->i_sb, &retries))
goto retry;
return ret;
}
*pagep = page;
return ret;
}
ext4: fix delalloc i_disksize early update issue Ext4_da_write_end() used walk_page_buffers() with a callback function of ext4_bh_unmapped_or_delay() to check if it extended the file size without allocating any blocks (since in this case i_disksize needs to be updated). However, this is didn't work proprely because the buffer head has not been marked dirty yet --- this is done later in block_commit_write() --- which caused ext4_bh_unmapped_or_delay() to always return false. In addition, walk_page_buffers() checks all of the buffer heads covering the page, and the only buffer_head that should be checked is the one covering the end of the write. Otherwise, given a 1k blocksize filesystem and a 4k page size, the buffer head covering the first 1k stripe of the file could be unmapped (because it was a sparse file), and the second or third buffer_head covering that page could be mapped, and using walk_page_buffers() would fail in this case since it would stop at the first unmapped buffer_head and return true. The core problem is that walk_page_buffers() was intended to do work in a callback function, and a non-zero return value indicated a failure, which termined the walk of the buffer heads covering the page. It was not intended to be used with a boolean function, such as ext4_bh_unmapped_or_delay(). Add addtional fix from Aneesh to protect i_disksize update rave with truncate. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-12 07:27:31 +08:00
/*
* Check if we should update i_disksize
* when write to the end of file but not require block allocation
*/
static int ext4_da_should_update_i_disksize(struct page *page,
unsigned long offset)
ext4: fix delalloc i_disksize early update issue Ext4_da_write_end() used walk_page_buffers() with a callback function of ext4_bh_unmapped_or_delay() to check if it extended the file size without allocating any blocks (since in this case i_disksize needs to be updated). However, this is didn't work proprely because the buffer head has not been marked dirty yet --- this is done later in block_commit_write() --- which caused ext4_bh_unmapped_or_delay() to always return false. In addition, walk_page_buffers() checks all of the buffer heads covering the page, and the only buffer_head that should be checked is the one covering the end of the write. Otherwise, given a 1k blocksize filesystem and a 4k page size, the buffer head covering the first 1k stripe of the file could be unmapped (because it was a sparse file), and the second or third buffer_head covering that page could be mapped, and using walk_page_buffers() would fail in this case since it would stop at the first unmapped buffer_head and return true. The core problem is that walk_page_buffers() was intended to do work in a callback function, and a non-zero return value indicated a failure, which termined the walk of the buffer heads covering the page. It was not intended to be used with a boolean function, such as ext4_bh_unmapped_or_delay(). Add addtional fix from Aneesh to protect i_disksize update rave with truncate. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-12 07:27:31 +08:00
{
struct buffer_head *bh;
struct inode *inode = page->mapping->host;
unsigned int idx;
int i;
bh = page_buffers(page);
idx = offset >> inode->i_blkbits;
for (i = 0; i < idx; i++)
ext4: fix delalloc i_disksize early update issue Ext4_da_write_end() used walk_page_buffers() with a callback function of ext4_bh_unmapped_or_delay() to check if it extended the file size without allocating any blocks (since in this case i_disksize needs to be updated). However, this is didn't work proprely because the buffer head has not been marked dirty yet --- this is done later in block_commit_write() --- which caused ext4_bh_unmapped_or_delay() to always return false. In addition, walk_page_buffers() checks all of the buffer heads covering the page, and the only buffer_head that should be checked is the one covering the end of the write. Otherwise, given a 1k blocksize filesystem and a 4k page size, the buffer head covering the first 1k stripe of the file could be unmapped (because it was a sparse file), and the second or third buffer_head covering that page could be mapped, and using walk_page_buffers() would fail in this case since it would stop at the first unmapped buffer_head and return true. The core problem is that walk_page_buffers() was intended to do work in a callback function, and a non-zero return value indicated a failure, which termined the walk of the buffer heads covering the page. It was not intended to be used with a boolean function, such as ext4_bh_unmapped_or_delay(). Add addtional fix from Aneesh to protect i_disksize update rave with truncate. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-12 07:27:31 +08:00
bh = bh->b_this_page;
if (!buffer_mapped(bh) || (buffer_delay(bh)) || buffer_unwritten(bh))
ext4: fix delalloc i_disksize early update issue Ext4_da_write_end() used walk_page_buffers() with a callback function of ext4_bh_unmapped_or_delay() to check if it extended the file size without allocating any blocks (since in this case i_disksize needs to be updated). However, this is didn't work proprely because the buffer head has not been marked dirty yet --- this is done later in block_commit_write() --- which caused ext4_bh_unmapped_or_delay() to always return false. In addition, walk_page_buffers() checks all of the buffer heads covering the page, and the only buffer_head that should be checked is the one covering the end of the write. Otherwise, given a 1k blocksize filesystem and a 4k page size, the buffer head covering the first 1k stripe of the file could be unmapped (because it was a sparse file), and the second or third buffer_head covering that page could be mapped, and using walk_page_buffers() would fail in this case since it would stop at the first unmapped buffer_head and return true. The core problem is that walk_page_buffers() was intended to do work in a callback function, and a non-zero return value indicated a failure, which termined the walk of the buffer heads covering the page. It was not intended to be used with a boolean function, such as ext4_bh_unmapped_or_delay(). Add addtional fix from Aneesh to protect i_disksize update rave with truncate. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-12 07:27:31 +08:00
return 0;
return 1;
}
static int ext4_da_write_end(struct file *file,
struct address_space *mapping,
loff_t pos, unsigned len, unsigned copied,
struct page *page, void *fsdata)
{
struct inode *inode = mapping->host;
loff_t new_i_size;
ext4: fix delalloc i_disksize early update issue Ext4_da_write_end() used walk_page_buffers() with a callback function of ext4_bh_unmapped_or_delay() to check if it extended the file size without allocating any blocks (since in this case i_disksize needs to be updated). However, this is didn't work proprely because the buffer head has not been marked dirty yet --- this is done later in block_commit_write() --- which caused ext4_bh_unmapped_or_delay() to always return false. In addition, walk_page_buffers() checks all of the buffer heads covering the page, and the only buffer_head that should be checked is the one covering the end of the write. Otherwise, given a 1k blocksize filesystem and a 4k page size, the buffer head covering the first 1k stripe of the file could be unmapped (because it was a sparse file), and the second or third buffer_head covering that page could be mapped, and using walk_page_buffers() would fail in this case since it would stop at the first unmapped buffer_head and return true. The core problem is that walk_page_buffers() was intended to do work in a callback function, and a non-zero return value indicated a failure, which termined the walk of the buffer heads covering the page. It was not intended to be used with a boolean function, such as ext4_bh_unmapped_or_delay(). Add addtional fix from Aneesh to protect i_disksize update rave with truncate. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-12 07:27:31 +08:00
unsigned long start, end;
int write_mode = (int)(unsigned long)fsdata;
if (write_mode == FALL_BACK_TO_NONDELALLOC)
return ext4_write_end(file, mapping, pos,
len, copied, page, fsdata);
ext4: fix delalloc i_disksize early update issue Ext4_da_write_end() used walk_page_buffers() with a callback function of ext4_bh_unmapped_or_delay() to check if it extended the file size without allocating any blocks (since in this case i_disksize needs to be updated). However, this is didn't work proprely because the buffer head has not been marked dirty yet --- this is done later in block_commit_write() --- which caused ext4_bh_unmapped_or_delay() to always return false. In addition, walk_page_buffers() checks all of the buffer heads covering the page, and the only buffer_head that should be checked is the one covering the end of the write. Otherwise, given a 1k blocksize filesystem and a 4k page size, the buffer head covering the first 1k stripe of the file could be unmapped (because it was a sparse file), and the second or third buffer_head covering that page could be mapped, and using walk_page_buffers() would fail in this case since it would stop at the first unmapped buffer_head and return true. The core problem is that walk_page_buffers() was intended to do work in a callback function, and a non-zero return value indicated a failure, which termined the walk of the buffer heads covering the page. It was not intended to be used with a boolean function, such as ext4_bh_unmapped_or_delay(). Add addtional fix from Aneesh to protect i_disksize update rave with truncate. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-12 07:27:31 +08:00
trace_ext4_da_write_end(inode, pos, len, copied);
if (write_mode != CONVERT_INLINE_DATA &&
ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) &&
ext4_has_inline_data(inode))
return ext4_write_inline_data_end(inode, pos, len, copied, page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
start = pos & (PAGE_SIZE - 1);
end = start + copied - 1;
/*
* Since we are holding inode lock, we are sure i_disksize <=
* i_size. We also know that if i_disksize < i_size, there are
* delalloc writes pending in the range upto i_size. If the end of
* the current write is <= i_size, there's no need to touch
* i_disksize since writeback will push i_disksize upto i_size
* eventually. If the end of the current write is > i_size and
* inside an allocated block (ext4_da_should_update_i_disksize()
* check), we need to update i_disksize here as neither
* ext4_writepage() nor certain ext4_writepages() paths not
* allocating blocks update i_disksize.
*
* Note that we defer inode dirtying to generic_write_end() /
* ext4_da_write_inline_data_end().
*/
new_i_size = pos + copied;
if (copied && new_i_size > inode->i_size &&
ext4_da_should_update_i_disksize(page, end))
ext4_update_i_disksize(inode, new_i_size);
return generic_write_end(file, mapping, pos, len, copied, page, fsdata);
}
/*
* Force all delayed allocation blocks to be allocated for a given inode.
*/
int ext4_alloc_da_blocks(struct inode *inode)
{
trace_ext4_alloc_da_blocks(inode);
if (!EXT4_I(inode)->i_reserved_data_blocks)
return 0;
/*
* We do something simple for now. The filemap_flush() will
* also start triggering a write of the data blocks, which is
* not strictly speaking necessary (and for users of
* laptop_mode, not even desirable). However, to do otherwise
* would require replicating code paths in:
*
* ext4_writepages() ->
* write_cache_pages() ---> (via passed in callback function)
* __mpage_da_writepage() -->
* mpage_add_bh_to_extent()
* mpage_da_map_blocks()
*
* The problem is that write_cache_pages(), located in
* mm/page-writeback.c, marks pages clean in preparation for
* doing I/O, which is not desirable if we're not planning on
* doing I/O at all.
*
* We could call write_cache_pages(), and then redirty all of
* the pages by calling redirty_page_for_writepage() but that
* would be ugly in the extreme. So instead we would need to
* replicate parts of the code in the above functions,
* simplifying them because we wouldn't actually intend to
* write out the pages, but rather only collect contiguous
* logical block extents, call the multi-block allocator, and
* then update the buffer heads with the block allocations.
*
* For now, though, we'll cheat by calling filemap_flush(),
* which will map the blocks, and start the I/O, but not
* actually wait for the I/O to complete.
*/
return filemap_flush(inode->i_mapping);
}
/*
* bmap() is special. It gets used by applications such as lilo and by
* the swapper to find the on-disk block of a specific piece of data.
*
* Naturally, this is dangerous if the block concerned is still in the
* journal. If somebody makes a swapfile on an ext4 data-journaling
* filesystem and enables swap, then they may get a nasty shock when the
* data getting swapped to that swapfile suddenly gets overwritten by
* the original zero's written out previously to the journal and
* awaiting writeback in the kernel's buffer cache.
*
* So, if we see any bmap calls here on a modified, data-journaled file,
* take extra steps to flush any blocks which might be in the cache.
*/
static sector_t ext4_bmap(struct address_space *mapping, sector_t block)
{
struct inode *inode = mapping->host;
journal_t *journal;
int err;
/*
* We can get here for an inline file via the FIBMAP ioctl
*/
if (ext4_has_inline_data(inode))
return 0;
if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY) &&
test_opt(inode->i_sb, DELALLOC)) {
/*
* With delalloc we want to sync the file
* so that we can make sure we allocate
* blocks for file
*/
filemap_write_and_wait(mapping);
}
if (EXT4_JOURNAL(inode) &&
ext4_test_inode_state(inode, EXT4_STATE_JDATA)) {
/*
* This is a REALLY heavyweight approach, but the use of
* bmap on dirty files is expected to be extremely rare:
* only if we run lilo or swapon on a freshly made file
* do we expect this to happen.
*
* (bmap requires CAP_SYS_RAWIO so this does not
* represent an unprivileged user DOS attack --- we'd be
* in trouble if mortal users could trigger this path at
* will.)
*
* NB. EXT4_STATE_JDATA is not set on files other than
* regular files. If somebody wants to bmap a directory
* or symlink and gets confused because the buffer
* hasn't yet been flushed to disk, they deserve
* everything they get.
*/
ext4_clear_inode_state(inode, EXT4_STATE_JDATA);
journal = EXT4_JOURNAL(inode);
jbd2_journal_lock_updates(journal);
err = jbd2_journal_flush(journal, 0);
jbd2_journal_unlock_updates(journal);
if (err)
return 0;
}
return iomap_bmap(mapping, block, &ext4_iomap_ops);
}
static int ext4_read_folio(struct file *file, struct folio *folio)
{
struct page *page = &folio->page;
int ret = -EAGAIN;
struct inode *inode = page->mapping->host;
trace_ext4_readpage(page);
if (ext4_has_inline_data(inode))
ret = ext4_readpage_inline(inode, page);
if (ret == -EAGAIN)
return ext4_mpage_readpages(inode, NULL, page);
return ret;
}
static void ext4_readahead(struct readahead_control *rac)
{
struct inode *inode = rac->mapping->host;
/* If the file has inline data, no need to do readahead. */
if (ext4_has_inline_data(inode))
return;
ext4_mpage_readpages(inode, rac, NULL);
}
static void ext4_invalidate_folio(struct folio *folio, size_t offset,
size_t length)
{
trace_ext4_invalidate_folio(folio, offset, length);
/* No journalling happens on data buffers when this function is used */
WARN_ON(folio_buffers(folio) && buffer_jbd(folio_buffers(folio)));
block_invalidate_folio(folio, offset, length);
}
static int __ext4_journalled_invalidate_folio(struct folio *folio,
size_t offset, size_t length)
{
journal_t *journal = EXT4_JOURNAL(folio->mapping->host);
trace_ext4_journalled_invalidate_folio(folio, offset, length);
/*
* If it's a full truncate we just forget about the pending dirtying
*/
if (offset == 0 && length == folio_size(folio))
folio_clear_checked(folio);
return jbd2_journal_invalidate_folio(journal, folio, offset, length);
}
/* Wrapper for aops... */
static void ext4_journalled_invalidate_folio(struct folio *folio,
size_t offset,
size_t length)
{
WARN_ON(__ext4_journalled_invalidate_folio(folio, offset, length) < 0);
}
static bool ext4_release_folio(struct folio *folio, gfp_t wait)
{
journal_t *journal = EXT4_JOURNAL(folio->mapping->host);
trace_ext4_releasepage(&folio->page);
/* Page has dirty journalled data -> cannot release */
if (folio_test_checked(folio))
return false;
if (journal)
return jbd2_journal_try_to_free_buffers(journal, folio);
else
return try_to_free_buffers(folio);
}
static bool ext4_inode_datasync_dirty(struct inode *inode)
{
journal_t *journal = EXT4_SB(inode->i_sb)->s_journal;
if (journal) {
if (jbd2_transaction_committed(journal,
EXT4_I(inode)->i_datasync_tid))
return false;
if (test_opt2(inode->i_sb, JOURNAL_FAST_COMMIT))
return !list_empty(&EXT4_I(inode)->i_fc_list);
return true;
}
/* Any metadata buffers to write? */
if (!list_empty(&inode->i_mapping->private_list))
return true;
return inode->i_state & I_DIRTY_DATASYNC;
}
static void ext4_set_iomap(struct inode *inode, struct iomap *iomap,
struct ext4_map_blocks *map, loff_t offset,
loff_t length, unsigned int flags)
{
u8 blkbits = inode->i_blkbits;
/*
* Writes that span EOF might trigger an I/O size update on completion,
* so consider them to be dirty for the purpose of O_DSYNC, even if
* there is no other metadata changes being made or are pending.
*/
iomap->flags = 0;
if (ext4_inode_datasync_dirty(inode) ||
offset + length > i_size_read(inode))
iomap->flags |= IOMAP_F_DIRTY;
if (map->m_flags & EXT4_MAP_NEW)
iomap->flags |= IOMAP_F_NEW;
if (flags & IOMAP_DAX)
iomap->dax_dev = EXT4_SB(inode->i_sb)->s_daxdev;
else
iomap->bdev = inode->i_sb->s_bdev;
iomap->offset = (u64) map->m_lblk << blkbits;
iomap->length = (u64) map->m_len << blkbits;
if ((map->m_flags & EXT4_MAP_MAPPED) &&
!ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
iomap->flags |= IOMAP_F_MERGED;
/*
* Flags passed to ext4_map_blocks() for direct I/O writes can result
* in m_flags having both EXT4_MAP_MAPPED and EXT4_MAP_UNWRITTEN bits
* set. In order for any allocated unwritten extents to be converted
* into written extents correctly within the ->end_io() handler, we
* need to ensure that the iomap->type is set appropriately. Hence, the
* reason why we need to check whether the EXT4_MAP_UNWRITTEN bit has
* been set first.
*/
if (map->m_flags & EXT4_MAP_UNWRITTEN) {
iomap->type = IOMAP_UNWRITTEN;
iomap->addr = (u64) map->m_pblk << blkbits;
if (flags & IOMAP_DAX)
iomap->addr += EXT4_SB(inode->i_sb)->s_dax_part_off;
} else if (map->m_flags & EXT4_MAP_MAPPED) {
iomap->type = IOMAP_MAPPED;
iomap->addr = (u64) map->m_pblk << blkbits;
if (flags & IOMAP_DAX)
iomap->addr += EXT4_SB(inode->i_sb)->s_dax_part_off;
} else {
iomap->type = IOMAP_HOLE;
iomap->addr = IOMAP_NULL_ADDR;
}
}
static int ext4_iomap_alloc(struct inode *inode, struct ext4_map_blocks *map,
unsigned int flags)
{
handle_t *handle;
ext4: introduce direct I/O write using iomap infrastructure This patch introduces a new direct I/O write path which makes use of the iomap infrastructure. All direct I/O writes are now passed from the ->write_iter() callback through to the new direct I/O handler ext4_dio_write_iter(). This function is responsible for calling into the iomap infrastructure via iomap_dio_rw(). Code snippets from the existing direct I/O write code within ext4_file_write_iter() such as, checking whether the I/O request is unaligned asynchronous I/O, or whether the write will result in an overwrite have effectively been moved out and into the new direct I/O ->write_iter() handler. The block mapping flags that are eventually passed down to ext4_map_blocks() from the *_get_block_*() suite of routines have been taken out and introduced within ext4_iomap_alloc(). For inode extension cases, ext4_handle_inode_extension() is effectively the function responsible for performing such metadata updates. This is called after iomap_dio_rw() has returned so that we can safely determine whether we need to potentially truncate any allocated blocks that may have been prepared for this direct I/O write. We don't perform the inode extension, or truncate operations from the ->end_io() handler as we don't have the original I/O 'length' available there. The ->end_io() however is responsible fo converting allocated unwritten extents to written extents. In the instance of a short write, we fallback and complete the remainder of the I/O using buffered I/O via ext4_buffered_write_iter(). The existing buffer_head direct I/O implementation has been removed as it's now redundant. [ Fix up ext4_dio_write_iter() per Jan's comments at https://lore.kernel.org/r/20191105135932.GN22379@quack2.suse.cz -- TYT ] Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/e55db6f12ae6ff017f36774135e79f3e7b0333da.1572949325.git.mbobrowski@mbobrowski.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05 20:02:39 +08:00
u8 blkbits = inode->i_blkbits;
int ret, dio_credits, m_flags = 0, retries = 0;
/*
* Trim the mapping request to the maximum value that we can map at
* once for direct I/O.
*/
if (map->m_len > DIO_MAX_BLOCKS)
map->m_len = DIO_MAX_BLOCKS;
dio_credits = ext4_chunk_trans_blocks(inode, map->m_len);
retry:
/*
* Either we allocate blocks and then don't get an unwritten extent, so
* in that case we have reserved enough credits. Or, the blocks are
* already allocated and unwritten. In that case, the extent conversion
* fits into the credits as well.
*/
handle = ext4_journal_start(inode, EXT4_HT_MAP_BLOCKS, dio_credits);
if (IS_ERR(handle))
return PTR_ERR(handle);
ext4: introduce direct I/O write using iomap infrastructure This patch introduces a new direct I/O write path which makes use of the iomap infrastructure. All direct I/O writes are now passed from the ->write_iter() callback through to the new direct I/O handler ext4_dio_write_iter(). This function is responsible for calling into the iomap infrastructure via iomap_dio_rw(). Code snippets from the existing direct I/O write code within ext4_file_write_iter() such as, checking whether the I/O request is unaligned asynchronous I/O, or whether the write will result in an overwrite have effectively been moved out and into the new direct I/O ->write_iter() handler. The block mapping flags that are eventually passed down to ext4_map_blocks() from the *_get_block_*() suite of routines have been taken out and introduced within ext4_iomap_alloc(). For inode extension cases, ext4_handle_inode_extension() is effectively the function responsible for performing such metadata updates. This is called after iomap_dio_rw() has returned so that we can safely determine whether we need to potentially truncate any allocated blocks that may have been prepared for this direct I/O write. We don't perform the inode extension, or truncate operations from the ->end_io() handler as we don't have the original I/O 'length' available there. The ->end_io() however is responsible fo converting allocated unwritten extents to written extents. In the instance of a short write, we fallback and complete the remainder of the I/O using buffered I/O via ext4_buffered_write_iter(). The existing buffer_head direct I/O implementation has been removed as it's now redundant. [ Fix up ext4_dio_write_iter() per Jan's comments at https://lore.kernel.org/r/20191105135932.GN22379@quack2.suse.cz -- TYT ] Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/e55db6f12ae6ff017f36774135e79f3e7b0333da.1572949325.git.mbobrowski@mbobrowski.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05 20:02:39 +08:00
/*
* DAX and direct I/O are the only two operations that are currently
* supported with IOMAP_WRITE.
*/
WARN_ON(!(flags & (IOMAP_DAX | IOMAP_DIRECT)));
if (flags & IOMAP_DAX)
ext4: introduce direct I/O write using iomap infrastructure This patch introduces a new direct I/O write path which makes use of the iomap infrastructure. All direct I/O writes are now passed from the ->write_iter() callback through to the new direct I/O handler ext4_dio_write_iter(). This function is responsible for calling into the iomap infrastructure via iomap_dio_rw(). Code snippets from the existing direct I/O write code within ext4_file_write_iter() such as, checking whether the I/O request is unaligned asynchronous I/O, or whether the write will result in an overwrite have effectively been moved out and into the new direct I/O ->write_iter() handler. The block mapping flags that are eventually passed down to ext4_map_blocks() from the *_get_block_*() suite of routines have been taken out and introduced within ext4_iomap_alloc(). For inode extension cases, ext4_handle_inode_extension() is effectively the function responsible for performing such metadata updates. This is called after iomap_dio_rw() has returned so that we can safely determine whether we need to potentially truncate any allocated blocks that may have been prepared for this direct I/O write. We don't perform the inode extension, or truncate operations from the ->end_io() handler as we don't have the original I/O 'length' available there. The ->end_io() however is responsible fo converting allocated unwritten extents to written extents. In the instance of a short write, we fallback and complete the remainder of the I/O using buffered I/O via ext4_buffered_write_iter(). The existing buffer_head direct I/O implementation has been removed as it's now redundant. [ Fix up ext4_dio_write_iter() per Jan's comments at https://lore.kernel.org/r/20191105135932.GN22379@quack2.suse.cz -- TYT ] Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/e55db6f12ae6ff017f36774135e79f3e7b0333da.1572949325.git.mbobrowski@mbobrowski.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05 20:02:39 +08:00
m_flags = EXT4_GET_BLOCKS_CREATE_ZERO;
/*
* We use i_size instead of i_disksize here because delalloc writeback
* can complete at any point during the I/O and subsequently push the
* i_disksize out to i_size. This could be beyond where direct I/O is
* happening and thus expose allocated blocks to direct I/O reads.
*/
else if (((loff_t)map->m_lblk << blkbits) >= i_size_read(inode))
ext4: introduce direct I/O write using iomap infrastructure This patch introduces a new direct I/O write path which makes use of the iomap infrastructure. All direct I/O writes are now passed from the ->write_iter() callback through to the new direct I/O handler ext4_dio_write_iter(). This function is responsible for calling into the iomap infrastructure via iomap_dio_rw(). Code snippets from the existing direct I/O write code within ext4_file_write_iter() such as, checking whether the I/O request is unaligned asynchronous I/O, or whether the write will result in an overwrite have effectively been moved out and into the new direct I/O ->write_iter() handler. The block mapping flags that are eventually passed down to ext4_map_blocks() from the *_get_block_*() suite of routines have been taken out and introduced within ext4_iomap_alloc(). For inode extension cases, ext4_handle_inode_extension() is effectively the function responsible for performing such metadata updates. This is called after iomap_dio_rw() has returned so that we can safely determine whether we need to potentially truncate any allocated blocks that may have been prepared for this direct I/O write. We don't perform the inode extension, or truncate operations from the ->end_io() handler as we don't have the original I/O 'length' available there. The ->end_io() however is responsible fo converting allocated unwritten extents to written extents. In the instance of a short write, we fallback and complete the remainder of the I/O using buffered I/O via ext4_buffered_write_iter(). The existing buffer_head direct I/O implementation has been removed as it's now redundant. [ Fix up ext4_dio_write_iter() per Jan's comments at https://lore.kernel.org/r/20191105135932.GN22379@quack2.suse.cz -- TYT ] Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/e55db6f12ae6ff017f36774135e79f3e7b0333da.1572949325.git.mbobrowski@mbobrowski.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05 20:02:39 +08:00
m_flags = EXT4_GET_BLOCKS_CREATE;
else if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
m_flags = EXT4_GET_BLOCKS_IO_CREATE_EXT;
ext4: introduce direct I/O write using iomap infrastructure This patch introduces a new direct I/O write path which makes use of the iomap infrastructure. All direct I/O writes are now passed from the ->write_iter() callback through to the new direct I/O handler ext4_dio_write_iter(). This function is responsible for calling into the iomap infrastructure via iomap_dio_rw(). Code snippets from the existing direct I/O write code within ext4_file_write_iter() such as, checking whether the I/O request is unaligned asynchronous I/O, or whether the write will result in an overwrite have effectively been moved out and into the new direct I/O ->write_iter() handler. The block mapping flags that are eventually passed down to ext4_map_blocks() from the *_get_block_*() suite of routines have been taken out and introduced within ext4_iomap_alloc(). For inode extension cases, ext4_handle_inode_extension() is effectively the function responsible for performing such metadata updates. This is called after iomap_dio_rw() has returned so that we can safely determine whether we need to potentially truncate any allocated blocks that may have been prepared for this direct I/O write. We don't perform the inode extension, or truncate operations from the ->end_io() handler as we don't have the original I/O 'length' available there. The ->end_io() however is responsible fo converting allocated unwritten extents to written extents. In the instance of a short write, we fallback and complete the remainder of the I/O using buffered I/O via ext4_buffered_write_iter(). The existing buffer_head direct I/O implementation has been removed as it's now redundant. [ Fix up ext4_dio_write_iter() per Jan's comments at https://lore.kernel.org/r/20191105135932.GN22379@quack2.suse.cz -- TYT ] Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/e55db6f12ae6ff017f36774135e79f3e7b0333da.1572949325.git.mbobrowski@mbobrowski.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05 20:02:39 +08:00
ret = ext4_map_blocks(handle, inode, map, m_flags);
/*
ext4: introduce direct I/O write using iomap infrastructure This patch introduces a new direct I/O write path which makes use of the iomap infrastructure. All direct I/O writes are now passed from the ->write_iter() callback through to the new direct I/O handler ext4_dio_write_iter(). This function is responsible for calling into the iomap infrastructure via iomap_dio_rw(). Code snippets from the existing direct I/O write code within ext4_file_write_iter() such as, checking whether the I/O request is unaligned asynchronous I/O, or whether the write will result in an overwrite have effectively been moved out and into the new direct I/O ->write_iter() handler. The block mapping flags that are eventually passed down to ext4_map_blocks() from the *_get_block_*() suite of routines have been taken out and introduced within ext4_iomap_alloc(). For inode extension cases, ext4_handle_inode_extension() is effectively the function responsible for performing such metadata updates. This is called after iomap_dio_rw() has returned so that we can safely determine whether we need to potentially truncate any allocated blocks that may have been prepared for this direct I/O write. We don't perform the inode extension, or truncate operations from the ->end_io() handler as we don't have the original I/O 'length' available there. The ->end_io() however is responsible fo converting allocated unwritten extents to written extents. In the instance of a short write, we fallback and complete the remainder of the I/O using buffered I/O via ext4_buffered_write_iter(). The existing buffer_head direct I/O implementation has been removed as it's now redundant. [ Fix up ext4_dio_write_iter() per Jan's comments at https://lore.kernel.org/r/20191105135932.GN22379@quack2.suse.cz -- TYT ] Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/e55db6f12ae6ff017f36774135e79f3e7b0333da.1572949325.git.mbobrowski@mbobrowski.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05 20:02:39 +08:00
* We cannot fill holes in indirect tree based inodes as that could
* expose stale data in the case of a crash. Use the magic error code
* to fallback to buffered I/O.
*/
ext4: introduce direct I/O write using iomap infrastructure This patch introduces a new direct I/O write path which makes use of the iomap infrastructure. All direct I/O writes are now passed from the ->write_iter() callback through to the new direct I/O handler ext4_dio_write_iter(). This function is responsible for calling into the iomap infrastructure via iomap_dio_rw(). Code snippets from the existing direct I/O write code within ext4_file_write_iter() such as, checking whether the I/O request is unaligned asynchronous I/O, or whether the write will result in an overwrite have effectively been moved out and into the new direct I/O ->write_iter() handler. The block mapping flags that are eventually passed down to ext4_map_blocks() from the *_get_block_*() suite of routines have been taken out and introduced within ext4_iomap_alloc(). For inode extension cases, ext4_handle_inode_extension() is effectively the function responsible for performing such metadata updates. This is called after iomap_dio_rw() has returned so that we can safely determine whether we need to potentially truncate any allocated blocks that may have been prepared for this direct I/O write. We don't perform the inode extension, or truncate operations from the ->end_io() handler as we don't have the original I/O 'length' available there. The ->end_io() however is responsible fo converting allocated unwritten extents to written extents. In the instance of a short write, we fallback and complete the remainder of the I/O using buffered I/O via ext4_buffered_write_iter(). The existing buffer_head direct I/O implementation has been removed as it's now redundant. [ Fix up ext4_dio_write_iter() per Jan's comments at https://lore.kernel.org/r/20191105135932.GN22379@quack2.suse.cz -- TYT ] Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/e55db6f12ae6ff017f36774135e79f3e7b0333da.1572949325.git.mbobrowski@mbobrowski.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05 20:02:39 +08:00
if (!m_flags && !ret)
ret = -ENOTBLK;
ext4_journal_stop(handle);
if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
goto retry;
return ret;
}
static int ext4_iomap_begin(struct inode *inode, loff_t offset, loff_t length,
unsigned flags, struct iomap *iomap, struct iomap *srcmap)
{
int ret;
struct ext4_map_blocks map;
u8 blkbits = inode->i_blkbits;
if ((offset >> blkbits) > EXT4_MAX_LOGICAL_BLOCK)
return -EINVAL;
if (WARN_ON_ONCE(ext4_has_inline_data(inode)))
return -ERANGE;
/*
* Calculate the first and last logical blocks respectively.
*/
map.m_lblk = offset >> blkbits;
map.m_len = min_t(loff_t, (offset + length - 1) >> blkbits,
EXT4_MAX_LOGICAL_BLOCK) - map.m_lblk + 1;
if (flags & IOMAP_WRITE) {
/*
* We check here if the blocks are already allocated, then we
* don't need to start a journal txn and we can directly return
* the mapping information. This could boost performance
* especially in multi-threaded overwrite requests.
*/
if (offset + length <= i_size_read(inode)) {
ret = ext4_map_blocks(NULL, inode, &map, 0);
if (ret > 0 && (map.m_flags & EXT4_MAP_MAPPED))
goto out;
}
ret = ext4_iomap_alloc(inode, &map, flags);
} else {
ret = ext4_map_blocks(NULL, inode, &map, 0);
}
if (ret < 0)
return ret;
out:
/*
* When inline encryption is enabled, sometimes I/O to an encrypted file
* has to be broken up to guarantee DUN contiguity. Handle this by
* limiting the length of the mapping returned.
*/
map.m_len = fscrypt_limit_io_blocks(inode, map.m_lblk, map.m_len);
ext4_set_iomap(inode, iomap, &map, offset, length, flags);
return 0;
}
ext4: Optimize ext4 DIO overwrites Currently we start transaction for mapping every extent for writing using direct IO. This is unnecessary when we know we are overwriting already allocated blocks and the overhead of starting a transaction can be significant especially for multithreaded workloads doing small writes. Use iomap operations that avoid starting a transaction for direct IO overwrites. This improves throughput of 4k random writes - fio jobfile: [global] rw=randrw norandommap=1 invalidate=0 bs=4k numjobs=16 time_based=1 ramp_time=30 runtime=120 group_reporting=1 ioengine=psync direct=1 size=16G filename=file1.0.0:file1.0.1:file1.0.2:file1.0.3:file1.0.4:file1.0.5:file1.0.6:file1.0.7:file1.0.8:file1.0.9:file1.0.10:file1.0.11:file1.0.12:file1.0.13:file1.0.14:file1.0.15:file1.0.16:file1.0.17:file1.0.18:file1.0.19:file1.0.20:file1.0.21:file1.0.22:file1.0.23:file1.0.24:file1.0.25:file1.0.26:file1.0.27:file1.0.28:file1.0.29:file1.0.30:file1.0.31 file_service_type=random nrfiles=32 from 3018MB/s to 4059MB/s in my test VM running test against simulated pmem device (note that before iomap conversion, this workload was able to achieve 3708MB/s because old direct IO path avoided transaction start for overwrites as well). For dax, the win is even larger improving throughput from 3042MB/s to 4311MB/s. Reported-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191218174433.19380-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-12-19 01:44:33 +08:00
static int ext4_iomap_overwrite_begin(struct inode *inode, loff_t offset,
loff_t length, unsigned flags, struct iomap *iomap,
struct iomap *srcmap)
{
int ret;
/*
* Even for writes we don't need to allocate blocks, so just pretend
* we are reading to save overhead of starting a transaction.
*/
flags &= ~IOMAP_WRITE;
ret = ext4_iomap_begin(inode, offset, length, flags, iomap, srcmap);
WARN_ON_ONCE(iomap->type != IOMAP_MAPPED);
return ret;
}
static int ext4_iomap_end(struct inode *inode, loff_t offset, loff_t length,
ssize_t written, unsigned flags, struct iomap *iomap)
{
/*
ext4: introduce direct I/O write using iomap infrastructure This patch introduces a new direct I/O write path which makes use of the iomap infrastructure. All direct I/O writes are now passed from the ->write_iter() callback through to the new direct I/O handler ext4_dio_write_iter(). This function is responsible for calling into the iomap infrastructure via iomap_dio_rw(). Code snippets from the existing direct I/O write code within ext4_file_write_iter() such as, checking whether the I/O request is unaligned asynchronous I/O, or whether the write will result in an overwrite have effectively been moved out and into the new direct I/O ->write_iter() handler. The block mapping flags that are eventually passed down to ext4_map_blocks() from the *_get_block_*() suite of routines have been taken out and introduced within ext4_iomap_alloc(). For inode extension cases, ext4_handle_inode_extension() is effectively the function responsible for performing such metadata updates. This is called after iomap_dio_rw() has returned so that we can safely determine whether we need to potentially truncate any allocated blocks that may have been prepared for this direct I/O write. We don't perform the inode extension, or truncate operations from the ->end_io() handler as we don't have the original I/O 'length' available there. The ->end_io() however is responsible fo converting allocated unwritten extents to written extents. In the instance of a short write, we fallback and complete the remainder of the I/O using buffered I/O via ext4_buffered_write_iter(). The existing buffer_head direct I/O implementation has been removed as it's now redundant. [ Fix up ext4_dio_write_iter() per Jan's comments at https://lore.kernel.org/r/20191105135932.GN22379@quack2.suse.cz -- TYT ] Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/e55db6f12ae6ff017f36774135e79f3e7b0333da.1572949325.git.mbobrowski@mbobrowski.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05 20:02:39 +08:00
* Check to see whether an error occurred while writing out the data to
* the allocated blocks. If so, return the magic error code so that we
* fallback to buffered I/O and attempt to complete the remainder of
* the I/O. Any blocks that may have been allocated in preparation for
* the direct I/O will be reused during buffered I/O.
*/
ext4: introduce direct I/O write using iomap infrastructure This patch introduces a new direct I/O write path which makes use of the iomap infrastructure. All direct I/O writes are now passed from the ->write_iter() callback through to the new direct I/O handler ext4_dio_write_iter(). This function is responsible for calling into the iomap infrastructure via iomap_dio_rw(). Code snippets from the existing direct I/O write code within ext4_file_write_iter() such as, checking whether the I/O request is unaligned asynchronous I/O, or whether the write will result in an overwrite have effectively been moved out and into the new direct I/O ->write_iter() handler. The block mapping flags that are eventually passed down to ext4_map_blocks() from the *_get_block_*() suite of routines have been taken out and introduced within ext4_iomap_alloc(). For inode extension cases, ext4_handle_inode_extension() is effectively the function responsible for performing such metadata updates. This is called after iomap_dio_rw() has returned so that we can safely determine whether we need to potentially truncate any allocated blocks that may have been prepared for this direct I/O write. We don't perform the inode extension, or truncate operations from the ->end_io() handler as we don't have the original I/O 'length' available there. The ->end_io() however is responsible fo converting allocated unwritten extents to written extents. In the instance of a short write, we fallback and complete the remainder of the I/O using buffered I/O via ext4_buffered_write_iter(). The existing buffer_head direct I/O implementation has been removed as it's now redundant. [ Fix up ext4_dio_write_iter() per Jan's comments at https://lore.kernel.org/r/20191105135932.GN22379@quack2.suse.cz -- TYT ] Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/e55db6f12ae6ff017f36774135e79f3e7b0333da.1572949325.git.mbobrowski@mbobrowski.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05 20:02:39 +08:00
if (flags & (IOMAP_WRITE | IOMAP_DIRECT) && written == 0)
return -ENOTBLK;
return 0;
}
const struct iomap_ops ext4_iomap_ops = {
.iomap_begin = ext4_iomap_begin,
.iomap_end = ext4_iomap_end,
};
ext4: Optimize ext4 DIO overwrites Currently we start transaction for mapping every extent for writing using direct IO. This is unnecessary when we know we are overwriting already allocated blocks and the overhead of starting a transaction can be significant especially for multithreaded workloads doing small writes. Use iomap operations that avoid starting a transaction for direct IO overwrites. This improves throughput of 4k random writes - fio jobfile: [global] rw=randrw norandommap=1 invalidate=0 bs=4k numjobs=16 time_based=1 ramp_time=30 runtime=120 group_reporting=1 ioengine=psync direct=1 size=16G filename=file1.0.0:file1.0.1:file1.0.2:file1.0.3:file1.0.4:file1.0.5:file1.0.6:file1.0.7:file1.0.8:file1.0.9:file1.0.10:file1.0.11:file1.0.12:file1.0.13:file1.0.14:file1.0.15:file1.0.16:file1.0.17:file1.0.18:file1.0.19:file1.0.20:file1.0.21:file1.0.22:file1.0.23:file1.0.24:file1.0.25:file1.0.26:file1.0.27:file1.0.28:file1.0.29:file1.0.30:file1.0.31 file_service_type=random nrfiles=32 from 3018MB/s to 4059MB/s in my test VM running test against simulated pmem device (note that before iomap conversion, this workload was able to achieve 3708MB/s because old direct IO path avoided transaction start for overwrites as well). For dax, the win is even larger improving throughput from 3042MB/s to 4311MB/s. Reported-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191218174433.19380-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-12-19 01:44:33 +08:00
const struct iomap_ops ext4_iomap_overwrite_ops = {
.iomap_begin = ext4_iomap_overwrite_begin,
.iomap_end = ext4_iomap_end,
};
static bool ext4_iomap_is_delalloc(struct inode *inode,
struct ext4_map_blocks *map)
{
struct extent_status es;
ext4_lblk_t offset = 0, end = map->m_lblk + map->m_len - 1;
ext4_es_find_extent_range(inode, &ext4_es_is_delayed,
map->m_lblk, end, &es);
if (!es.es_len || es.es_lblk > end)
return false;
if (es.es_lblk > map->m_lblk) {
map->m_len = es.es_lblk - map->m_lblk;
return false;
}
offset = map->m_lblk - es.es_lblk;
map->m_len = es.es_len - offset;
return true;
}
static int ext4_iomap_begin_report(struct inode *inode, loff_t offset,
loff_t length, unsigned int flags,
struct iomap *iomap, struct iomap *srcmap)
{
int ret;
bool delalloc = false;
struct ext4_map_blocks map;
u8 blkbits = inode->i_blkbits;
if ((offset >> blkbits) > EXT4_MAX_LOGICAL_BLOCK)
return -EINVAL;
if (ext4_has_inline_data(inode)) {
ret = ext4_inline_data_iomap(inode, iomap);
if (ret != -EAGAIN) {
if (ret == 0 && offset >= iomap->length)
ret = -ENOENT;
return ret;
}
}
/*
* Calculate the first and last logical block respectively.
*/
map.m_lblk = offset >> blkbits;
map.m_len = min_t(loff_t, (offset + length - 1) >> blkbits,
EXT4_MAX_LOGICAL_BLOCK) - map.m_lblk + 1;
/*
* Fiemap callers may call for offset beyond s_bitmap_maxbytes.
* So handle it here itself instead of querying ext4_map_blocks().
* Since ext4_map_blocks() will warn about it and will return
* -EIO error.
*/
if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) {
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
if (offset >= sbi->s_bitmap_maxbytes) {
map.m_flags = 0;
goto set_iomap;
}
}
ret = ext4_map_blocks(NULL, inode, &map, 0);
if (ret < 0)
return ret;
if (ret == 0)
delalloc = ext4_iomap_is_delalloc(inode, &map);
set_iomap:
ext4_set_iomap(inode, iomap, &map, offset, length, flags);
if (delalloc && iomap->type == IOMAP_HOLE)
iomap->type = IOMAP_DELALLOC;
return 0;
}
const struct iomap_ops ext4_iomap_report_ops = {
.iomap_begin = ext4_iomap_begin_report,
};
/*
Filesystem folio changes for 5.18 Primarily this series converts some of the address_space operations to take a folio instead of a page. ->is_partially_uptodate() takes a folio instead of a page and changes the type of the 'from' and 'count' arguments to make it obvious they're bytes. ->invalidatepage() becomes ->invalidate_folio() and has a similar type change. ->launder_page() becomes ->launder_folio() ->set_page_dirty() becomes ->dirty_folio() and adds the address_space as an argument. There are a couple of other misc changes up front that weren't worth separating into their own pull request. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4hqMACgkQDpNsjXcp gj7r7Af/fVJ7m8kKqjP/IayX3HiJRuIDQw+vM++BlRNXdjz+IyED6whdmFGxJeOY BMyT+8ApOAz7ErS4G+7fAv4ScJK/aEgFUsnSeAiCp0PliiEJ5NNJzElp6sVmQ7H5 SX7+Ek444FZUGsQuy0qL7/ELpR3ditnD7x+5U2g0p5TeaHGUQn84crRyfR4xuhNG EBD9D71BOb7OxUcOHe93pTkK51QsQ0aCrcIsB1tkK5KR0BAthn1HqF7ehL90Rvrr omx5M7aDWGY4oj7IKrhlAs+55Ah2WaOzrZBp0FXNbr4UENDBKWKyUxErwa4xPkf6 Gm1iQG/CspOHnxN3YWsd5WjtlL3A+A== =cOiq -----END PGP SIGNATURE----- Merge tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache Pull filesystem folio updates from Matthew Wilcox: "Primarily this series converts some of the address_space operations to take a folio instead of a page. Notably: - a_ops->is_partially_uptodate() takes a folio instead of a page and changes the type of the 'from' and 'count' arguments to make it obvious they're bytes. - a_ops->invalidatepage() becomes ->invalidate_folio() and has a similar type change. - a_ops->launder_page() becomes ->launder_folio() - a_ops->set_page_dirty() becomes ->dirty_folio() and adds the address_space as an argument. There are a couple of other misc changes up front that weren't worth separating into their own pull request" * tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache: (53 commits) fs: Remove aops ->set_page_dirty fb_defio: Use noop_dirty_folio() fs: Convert __set_page_dirty_no_writeback to noop_dirty_folio fs: Convert __set_page_dirty_buffers to block_dirty_folio nilfs: Convert nilfs_set_page_dirty() to nilfs_dirty_folio() mm: Convert swap_set_page_dirty() to swap_dirty_folio() ubifs: Convert ubifs_set_page_dirty to ubifs_dirty_folio f2fs: Convert f2fs_set_node_page_dirty to f2fs_dirty_node_folio f2fs: Convert f2fs_set_data_page_dirty to f2fs_dirty_data_folio f2fs: Convert f2fs_set_meta_page_dirty to f2fs_dirty_meta_folio afs: Convert afs_dir_set_page_dirty() to afs_dir_dirty_folio() btrfs: Convert extent_range_redirty_for_io() to use folios fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folio btrfs: Convert from set_page_dirty to dirty_folio fscache: Convert fscache_set_page_dirty() to fscache_dirty_folio() fs: Add aops->dirty_folio fs: Remove aops->launder_page orangefs: Convert launder_page to launder_folio nfs: Convert from launder_page to launder_folio fuse: Convert from launder_page to launder_folio ...
2022-03-23 09:26:56 +08:00
* Whenever the folio is being dirtied, corresponding buffers should already
* be attached to the transaction (we take care of this in ext4_page_mkwrite()
* and ext4_write_begin()). However we cannot move buffers to dirty transaction
* lists here because ->dirty_folio is called under VFS locks and the folio
* is not necessarily locked.
*
* We cannot just dirty the folio and leave attached buffers clean, because the
* buffers' dirty state is "definitive". We cannot just set the buffers dirty
* or jbddirty because all the journalling code will explode.
*
* So what we do is to mark the folio "pending dirty" and next time writepage
* is called, propagate that into the buffers appropriately.
*/
static bool ext4_journalled_dirty_folio(struct address_space *mapping,
struct folio *folio)
{
WARN_ON_ONCE(!folio_buffers(folio));
folio_set_checked(folio);
return filemap_dirty_folio(mapping, folio);
}
static bool ext4_dirty_folio(struct address_space *mapping, struct folio *folio)
{
WARN_ON_ONCE(!folio_test_locked(folio) && !folio_test_dirty(folio));
WARN_ON_ONCE(!folio_buffers(folio));
return block_dirty_folio(mapping, folio);
}
static int ext4_iomap_swap_activate(struct swap_info_struct *sis,
struct file *file, sector_t *span)
{
return iomap_swapfile_activate(sis, file, span,
&ext4_iomap_report_ops);
}
static const struct address_space_operations ext4_aops = {
.read_folio = ext4_read_folio,
.readahead = ext4_readahead,
.writepage = ext4_writepage,
.writepages = ext4_writepages,
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-29 06:46:36 +08:00
.write_begin = ext4_write_begin,
.write_end = ext4_write_end,
.dirty_folio = ext4_dirty_folio,
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-29 06:46:36 +08:00
.bmap = ext4_bmap,
.invalidate_folio = ext4_invalidate_folio,
.release_folio = ext4_release_folio,
ext4: introduce direct I/O write using iomap infrastructure This patch introduces a new direct I/O write path which makes use of the iomap infrastructure. All direct I/O writes are now passed from the ->write_iter() callback through to the new direct I/O handler ext4_dio_write_iter(). This function is responsible for calling into the iomap infrastructure via iomap_dio_rw(). Code snippets from the existing direct I/O write code within ext4_file_write_iter() such as, checking whether the I/O request is unaligned asynchronous I/O, or whether the write will result in an overwrite have effectively been moved out and into the new direct I/O ->write_iter() handler. The block mapping flags that are eventually passed down to ext4_map_blocks() from the *_get_block_*() suite of routines have been taken out and introduced within ext4_iomap_alloc(). For inode extension cases, ext4_handle_inode_extension() is effectively the function responsible for performing such metadata updates. This is called after iomap_dio_rw() has returned so that we can safely determine whether we need to potentially truncate any allocated blocks that may have been prepared for this direct I/O write. We don't perform the inode extension, or truncate operations from the ->end_io() handler as we don't have the original I/O 'length' available there. The ->end_io() however is responsible fo converting allocated unwritten extents to written extents. In the instance of a short write, we fallback and complete the remainder of the I/O using buffered I/O via ext4_buffered_write_iter(). The existing buffer_head direct I/O implementation has been removed as it's now redundant. [ Fix up ext4_dio_write_iter() per Jan's comments at https://lore.kernel.org/r/20191105135932.GN22379@quack2.suse.cz -- TYT ] Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/e55db6f12ae6ff017f36774135e79f3e7b0333da.1572949325.git.mbobrowski@mbobrowski.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05 20:02:39 +08:00
.direct_IO = noop_direct_IO,
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-29 06:46:36 +08:00
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
.error_remove_page = generic_error_remove_page,
.swap_activate = ext4_iomap_swap_activate,
};
static const struct address_space_operations ext4_journalled_aops = {
.read_folio = ext4_read_folio,
.readahead = ext4_readahead,
.writepage = ext4_writepage,
.writepages = ext4_writepages,
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-29 06:46:36 +08:00
.write_begin = ext4_write_begin,
.write_end = ext4_journalled_write_end,
.dirty_folio = ext4_journalled_dirty_folio,
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-29 06:46:36 +08:00
.bmap = ext4_bmap,
.invalidate_folio = ext4_journalled_invalidate_folio,
.release_folio = ext4_release_folio,
ext4: introduce direct I/O write using iomap infrastructure This patch introduces a new direct I/O write path which makes use of the iomap infrastructure. All direct I/O writes are now passed from the ->write_iter() callback through to the new direct I/O handler ext4_dio_write_iter(). This function is responsible for calling into the iomap infrastructure via iomap_dio_rw(). Code snippets from the existing direct I/O write code within ext4_file_write_iter() such as, checking whether the I/O request is unaligned asynchronous I/O, or whether the write will result in an overwrite have effectively been moved out and into the new direct I/O ->write_iter() handler. The block mapping flags that are eventually passed down to ext4_map_blocks() from the *_get_block_*() suite of routines have been taken out and introduced within ext4_iomap_alloc(). For inode extension cases, ext4_handle_inode_extension() is effectively the function responsible for performing such metadata updates. This is called after iomap_dio_rw() has returned so that we can safely determine whether we need to potentially truncate any allocated blocks that may have been prepared for this direct I/O write. We don't perform the inode extension, or truncate operations from the ->end_io() handler as we don't have the original I/O 'length' available there. The ->end_io() however is responsible fo converting allocated unwritten extents to written extents. In the instance of a short write, we fallback and complete the remainder of the I/O using buffered I/O via ext4_buffered_write_iter(). The existing buffer_head direct I/O implementation has been removed as it's now redundant. [ Fix up ext4_dio_write_iter() per Jan's comments at https://lore.kernel.org/r/20191105135932.GN22379@quack2.suse.cz -- TYT ] Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/e55db6f12ae6ff017f36774135e79f3e7b0333da.1572949325.git.mbobrowski@mbobrowski.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05 20:02:39 +08:00
.direct_IO = noop_direct_IO,
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-29 06:46:36 +08:00
.is_partially_uptodate = block_is_partially_uptodate,
.error_remove_page = generic_error_remove_page,
.swap_activate = ext4_iomap_swap_activate,
};
static const struct address_space_operations ext4_da_aops = {
.read_folio = ext4_read_folio,
.readahead = ext4_readahead,
.writepage = ext4_writepage,
.writepages = ext4_writepages,
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-29 06:46:36 +08:00
.write_begin = ext4_da_write_begin,
.write_end = ext4_da_write_end,
.dirty_folio = ext4_dirty_folio,
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-29 06:46:36 +08:00
.bmap = ext4_bmap,
.invalidate_folio = ext4_invalidate_folio,
.release_folio = ext4_release_folio,
ext4: introduce direct I/O write using iomap infrastructure This patch introduces a new direct I/O write path which makes use of the iomap infrastructure. All direct I/O writes are now passed from the ->write_iter() callback through to the new direct I/O handler ext4_dio_write_iter(). This function is responsible for calling into the iomap infrastructure via iomap_dio_rw(). Code snippets from the existing direct I/O write code within ext4_file_write_iter() such as, checking whether the I/O request is unaligned asynchronous I/O, or whether the write will result in an overwrite have effectively been moved out and into the new direct I/O ->write_iter() handler. The block mapping flags that are eventually passed down to ext4_map_blocks() from the *_get_block_*() suite of routines have been taken out and introduced within ext4_iomap_alloc(). For inode extension cases, ext4_handle_inode_extension() is effectively the function responsible for performing such metadata updates. This is called after iomap_dio_rw() has returned so that we can safely determine whether we need to potentially truncate any allocated blocks that may have been prepared for this direct I/O write. We don't perform the inode extension, or truncate operations from the ->end_io() handler as we don't have the original I/O 'length' available there. The ->end_io() however is responsible fo converting allocated unwritten extents to written extents. In the instance of a short write, we fallback and complete the remainder of the I/O using buffered I/O via ext4_buffered_write_iter(). The existing buffer_head direct I/O implementation has been removed as it's now redundant. [ Fix up ext4_dio_write_iter() per Jan's comments at https://lore.kernel.org/r/20191105135932.GN22379@quack2.suse.cz -- TYT ] Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/e55db6f12ae6ff017f36774135e79f3e7b0333da.1572949325.git.mbobrowski@mbobrowski.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05 20:02:39 +08:00
.direct_IO = noop_direct_IO,
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-29 06:46:36 +08:00
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
.error_remove_page = generic_error_remove_page,
.swap_activate = ext4_iomap_swap_activate,
};
static const struct address_space_operations ext4_dax_aops = {
.writepages = ext4_dax_writepages,
.direct_IO = noop_direct_IO,
.dirty_folio = noop_dirty_folio,
.bmap = ext4_bmap,
.swap_activate = ext4_iomap_swap_activate,
};
void ext4_set_aops(struct inode *inode)
{
ext4: ignore EXT4_INODE_JOURNAL_DATA flag with delalloc Ext4 does not support data journalling with delayed allocation enabled. We even do not allow to mount the file system with delayed allocation and data journalling enabled, however it can be set via FS_IOC_SETFLAGS so we can hit the inode with EXT4_INODE_JOURNAL_DATA set even on file system mounted with delayed allocation (default) and that's where problem arises. The easies way to reproduce this problem is with the following set of commands: mkfs.ext4 /dev/sdd mount /dev/sdd /mnt/test1 dd if=/dev/zero of=/mnt/test1/file bs=1M count=4 chattr +j /mnt/test1/file dd if=/dev/zero of=/mnt/test1/file bs=1M count=4 conv=notrunc chattr -j /mnt/test1/file Additionally it can be reproduced quite reliably with xfstests 272 and 269. In fact the above reproducer is a part of test 272. To fix this we should ignore the EXT4_INODE_JOURNAL_DATA inode flag if the file system is mounted with delayed allocation. This can be easily done by fixing ext4_should_*_data() functions do ignore data journal flag when delalloc is set (suggested by Ted). We also have to set the appropriate address space operations for the inode (again, ignoring data journal flag if delalloc enabled). Additionally this commit introduces ext4_inode_journal_mode() function because ext4_should_*_data() has already had a lot of common code and this change is putting it all into one function so it is easier to read. Successfully tested with xfstests in following configurations: delalloc + data=ordered delalloc + data=writeback data=journal nodelalloc + data=ordered nodelalloc + data=writeback nodelalloc + data=journal Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2012-02-21 06:53:00 +08:00
switch (ext4_inode_journal_mode(inode)) {
case EXT4_INODE_ORDERED_DATA_MODE:
case EXT4_INODE_WRITEBACK_DATA_MODE:
break;
case EXT4_INODE_JOURNAL_DATA_MODE:
inode->i_mapping->a_ops = &ext4_journalled_aops;
return;
ext4: ignore EXT4_INODE_JOURNAL_DATA flag with delalloc Ext4 does not support data journalling with delayed allocation enabled. We even do not allow to mount the file system with delayed allocation and data journalling enabled, however it can be set via FS_IOC_SETFLAGS so we can hit the inode with EXT4_INODE_JOURNAL_DATA set even on file system mounted with delayed allocation (default) and that's where problem arises. The easies way to reproduce this problem is with the following set of commands: mkfs.ext4 /dev/sdd mount /dev/sdd /mnt/test1 dd if=/dev/zero of=/mnt/test1/file bs=1M count=4 chattr +j /mnt/test1/file dd if=/dev/zero of=/mnt/test1/file bs=1M count=4 conv=notrunc chattr -j /mnt/test1/file Additionally it can be reproduced quite reliably with xfstests 272 and 269. In fact the above reproducer is a part of test 272. To fix this we should ignore the EXT4_INODE_JOURNAL_DATA inode flag if the file system is mounted with delayed allocation. This can be easily done by fixing ext4_should_*_data() functions do ignore data journal flag when delalloc is set (suggested by Ted). We also have to set the appropriate address space operations for the inode (again, ignoring data journal flag if delalloc enabled). Additionally this commit introduces ext4_inode_journal_mode() function because ext4_should_*_data() has already had a lot of common code and this change is putting it all into one function so it is easier to read. Successfully tested with xfstests in following configurations: delalloc + data=ordered delalloc + data=writeback data=journal nodelalloc + data=ordered nodelalloc + data=writeback nodelalloc + data=journal Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2012-02-21 06:53:00 +08:00
default:
BUG();
}
if (IS_DAX(inode))
inode->i_mapping->a_ops = &ext4_dax_aops;
else if (test_opt(inode->i_sb, DELALLOC))
inode->i_mapping->a_ops = &ext4_da_aops;
else
inode->i_mapping->a_ops = &ext4_aops;
}
static int __ext4_block_zero_page_range(handle_t *handle,
struct address_space *mapping, loff_t from, loff_t length)
{
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
ext4_fsblk_t index = from >> PAGE_SHIFT;
unsigned offset = from & (PAGE_SIZE-1);
unsigned blocksize, pos;
ext4_lblk_t iblock;
struct inode *inode = mapping->host;
struct buffer_head *bh;
struct page *page;
int err = 0;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
page = find_or_create_page(mapping, from >> PAGE_SHIFT,
mapping_gfp_constraint(mapping, ~__GFP_FS));
if (!page)
return -ENOMEM;
blocksize = inode->i_sb->s_blocksize;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
iblock = index << (PAGE_SHIFT - inode->i_sb->s_blocksize_bits);
if (!page_has_buffers(page))
create_empty_buffers(page, blocksize, 0);
/* Find the buffer that contains "offset" */
bh = page_buffers(page);
pos = blocksize;
while (offset >= pos) {
bh = bh->b_this_page;
iblock++;
pos += blocksize;
}
if (buffer_freed(bh)) {
BUFFER_TRACE(bh, "freed: skip");
goto unlock;
}
if (!buffer_mapped(bh)) {
BUFFER_TRACE(bh, "unmapped");
ext4_get_block(inode, iblock, bh, 0);
/* unmapped? It's a hole - nothing to do */
if (!buffer_mapped(bh)) {
BUFFER_TRACE(bh, "still unmapped");
goto unlock;
}
}
/* Ok, it's mapped. Make sure it's up-to-date */
if (PageUptodate(page))
set_buffer_uptodate(bh);
if (!buffer_uptodate(bh)) {
err = ext4_read_bh_lock(bh, 0, true);
if (err)
goto unlock;
if (fscrypt_inode_uses_fs_layer_crypto(inode)) {
/* We expect the key to be set. */
BUG_ON(!fscrypt_has_encryption_key(inode));
err = fscrypt_decrypt_pagecache_blocks(page, blocksize,
bh_offset(bh));
if (err) {
clear_buffer_uptodate(bh);
goto unlock;
}
}
}
if (ext4_should_journal_data(inode)) {
BUFFER_TRACE(bh, "get write access");
err = ext4_journal_get_write_access(handle, inode->i_sb, bh,
EXT4_JTR_NONE);
if (err)
goto unlock;
}
zero_user(page, offset, length);
BUFFER_TRACE(bh, "zeroed end of block");
if (ext4_should_journal_data(inode)) {
err = ext4_handle_dirty_metadata(handle, inode, bh);
} else {
err = 0;
mark_buffer_dirty(bh);
if (ext4_should_order_data(inode))
err = ext4_jbd2_inode_add_write(handle, inode, from,
length);
}
unlock:
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
return err;
}
/*
* ext4_block_zero_page_range() zeros out a mapping of length 'length'
* starting from file offset 'from'. The range to be zero'd must
* be contained with in one block. If the specified range exceeds
* the end of the block it will be shortened to end of the block
* that corresponds to 'from'
*/
static int ext4_block_zero_page_range(handle_t *handle,
struct address_space *mapping, loff_t from, loff_t length)
{
struct inode *inode = mapping->host;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
unsigned offset = from & (PAGE_SIZE-1);
unsigned blocksize = inode->i_sb->s_blocksize;
unsigned max = blocksize - (offset & (blocksize - 1));
/*
* correct length if it does not fall between
* 'from' and the end of the block
*/
if (length > max || length < 0)
length = max;
if (IS_DAX(inode)) {
return dax_zero_range(inode, from, length, NULL,
&ext4_iomap_ops);
}
return __ext4_block_zero_page_range(handle, mapping, from, length);
}
/*
* ext4_block_truncate_page() zeroes out a mapping from file offset `from'
* up to the end of the block which corresponds to `from'.
* This required during truncate. We need to physically zero the tail end
* of that block so it doesn't yield old data if the file is later grown.
*/
static int ext4_block_truncate_page(handle_t *handle,
struct address_space *mapping, loff_t from)
{
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
unsigned offset = from & (PAGE_SIZE-1);
unsigned length;
unsigned blocksize;
struct inode *inode = mapping->host;
ext4: don't BUG when truncating encrypted inodes on the orphan list Fix a BUG when the kernel tries to mount a file system constructed as follows: echo foo > foo.txt mke2fs -Fq -t ext4 -O encrypt foo.img 100 debugfs -w foo.img << EOF write foo.txt a set_inode_field a i_flags 0x80800 set_super_value s_last_orphan 12 quit EOF root@kvm-xfstests:~# mount -o loop foo.img /mnt [ 160.238770] ------------[ cut here ]------------ [ 160.240106] kernel BUG at /usr/projects/linux/ext4/fs/ext4/inode.c:3874! [ 160.240106] invalid opcode: 0000 [#1] SMP [ 160.240106] Modules linked in: [ 160.240106] CPU: 0 PID: 2547 Comm: mount Tainted: G W 4.10.0-rc3-00034-gcdd33b941b67 #227 [ 160.240106] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1 04/01/2014 [ 160.240106] task: f4518000 task.stack: f47b6000 [ 160.240106] EIP: ext4_block_zero_page_range+0x1a7/0x2b4 [ 160.240106] EFLAGS: 00010246 CPU: 0 [ 160.240106] EAX: 00000001 EBX: f7be4b50 ECX: f47b7dc0 EDX: 00000007 [ 160.240106] ESI: f43b05a8 EDI: f43babec EBP: f47b7dd0 ESP: f47b7dac [ 160.240106] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 160.240106] CR0: 80050033 CR2: bfd85b08 CR3: 34a00680 CR4: 000006f0 [ 160.240106] Call Trace: [ 160.240106] ext4_truncate+0x1e9/0x3e5 [ 160.240106] ext4_fill_super+0x286f/0x2b1e [ 160.240106] ? set_blocksize+0x2e/0x7e [ 160.240106] mount_bdev+0x114/0x15f [ 160.240106] ext4_mount+0x15/0x17 [ 160.240106] ? ext4_calculate_overhead+0x39d/0x39d [ 160.240106] mount_fs+0x58/0x115 [ 160.240106] vfs_kern_mount+0x4b/0xae [ 160.240106] do_mount+0x671/0x8c3 [ 160.240106] ? _copy_from_user+0x70/0x83 [ 160.240106] ? strndup_user+0x31/0x46 [ 160.240106] SyS_mount+0x57/0x7b [ 160.240106] do_int80_syscall_32+0x4f/0x61 [ 160.240106] entry_INT80_32+0x2f/0x2f [ 160.240106] EIP: 0xb76b919e [ 160.240106] EFLAGS: 00000246 CPU: 0 [ 160.240106] EAX: ffffffda EBX: 08053838 ECX: 08052188 EDX: 080537e8 [ 160.240106] ESI: c0ed0000 EDI: 00000000 EBP: 080537e8 ESP: bfa13660 [ 160.240106] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b [ 160.240106] Code: 59 8b 00 a8 01 0f 84 09 01 00 00 8b 07 66 25 00 f0 66 3d 00 80 75 61 89 f8 e8 3e e2 ff ff 84 c0 74 56 83 bf 48 02 00 00 00 75 02 <0f> 0b 81 7d e8 00 10 00 00 74 02 0f 0b 8b 43 04 8b 53 08 31 c9 [ 160.240106] EIP: ext4_block_zero_page_range+0x1a7/0x2b4 SS:ESP: 0068:f47b7dac [ 160.317241] ---[ end trace d6a773a375c810a5 ]--- The problem is that when the kernel tries to truncate an inode in ext4_truncate(), it tries to clear any on-disk data beyond i_size. Without the encryption key, it can't do that, and so it triggers a BUG. E2fsck does *not* provide this service, and in practice most file systems have their orphan list processed by e2fsck, so to avoid crashing, this patch skips this step if we don't have access to the encryption key (which is the case when processing the orphan list; in all other cases, we will have the encryption key, or the kernel wouldn't have allowed the file to be opened). An open question is whether the fact that e2fsck isn't clearing the bytes beyond i_size causing problems --- and if we've lived with it not doing it for so long, can we drop this from the kernel replay of the orphan list in all cases (not just when we don't have the key for encrypted inodes). Addresses-Google-Bug: #35209576 Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-02-15 00:31:15 +08:00
/* If we are processing an encrypted inode during orphan list handling */
if (IS_ENCRYPTED(inode) && !fscrypt_has_encryption_key(inode))
ext4: don't BUG when truncating encrypted inodes on the orphan list Fix a BUG when the kernel tries to mount a file system constructed as follows: echo foo > foo.txt mke2fs -Fq -t ext4 -O encrypt foo.img 100 debugfs -w foo.img << EOF write foo.txt a set_inode_field a i_flags 0x80800 set_super_value s_last_orphan 12 quit EOF root@kvm-xfstests:~# mount -o loop foo.img /mnt [ 160.238770] ------------[ cut here ]------------ [ 160.240106] kernel BUG at /usr/projects/linux/ext4/fs/ext4/inode.c:3874! [ 160.240106] invalid opcode: 0000 [#1] SMP [ 160.240106] Modules linked in: [ 160.240106] CPU: 0 PID: 2547 Comm: mount Tainted: G W 4.10.0-rc3-00034-gcdd33b941b67 #227 [ 160.240106] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1 04/01/2014 [ 160.240106] task: f4518000 task.stack: f47b6000 [ 160.240106] EIP: ext4_block_zero_page_range+0x1a7/0x2b4 [ 160.240106] EFLAGS: 00010246 CPU: 0 [ 160.240106] EAX: 00000001 EBX: f7be4b50 ECX: f47b7dc0 EDX: 00000007 [ 160.240106] ESI: f43b05a8 EDI: f43babec EBP: f47b7dd0 ESP: f47b7dac [ 160.240106] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 160.240106] CR0: 80050033 CR2: bfd85b08 CR3: 34a00680 CR4: 000006f0 [ 160.240106] Call Trace: [ 160.240106] ext4_truncate+0x1e9/0x3e5 [ 160.240106] ext4_fill_super+0x286f/0x2b1e [ 160.240106] ? set_blocksize+0x2e/0x7e [ 160.240106] mount_bdev+0x114/0x15f [ 160.240106] ext4_mount+0x15/0x17 [ 160.240106] ? ext4_calculate_overhead+0x39d/0x39d [ 160.240106] mount_fs+0x58/0x115 [ 160.240106] vfs_kern_mount+0x4b/0xae [ 160.240106] do_mount+0x671/0x8c3 [ 160.240106] ? _copy_from_user+0x70/0x83 [ 160.240106] ? strndup_user+0x31/0x46 [ 160.240106] SyS_mount+0x57/0x7b [ 160.240106] do_int80_syscall_32+0x4f/0x61 [ 160.240106] entry_INT80_32+0x2f/0x2f [ 160.240106] EIP: 0xb76b919e [ 160.240106] EFLAGS: 00000246 CPU: 0 [ 160.240106] EAX: ffffffda EBX: 08053838 ECX: 08052188 EDX: 080537e8 [ 160.240106] ESI: c0ed0000 EDI: 00000000 EBP: 080537e8 ESP: bfa13660 [ 160.240106] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b [ 160.240106] Code: 59 8b 00 a8 01 0f 84 09 01 00 00 8b 07 66 25 00 f0 66 3d 00 80 75 61 89 f8 e8 3e e2 ff ff 84 c0 74 56 83 bf 48 02 00 00 00 75 02 <0f> 0b 81 7d e8 00 10 00 00 74 02 0f 0b 8b 43 04 8b 53 08 31 c9 [ 160.240106] EIP: ext4_block_zero_page_range+0x1a7/0x2b4 SS:ESP: 0068:f47b7dac [ 160.317241] ---[ end trace d6a773a375c810a5 ]--- The problem is that when the kernel tries to truncate an inode in ext4_truncate(), it tries to clear any on-disk data beyond i_size. Without the encryption key, it can't do that, and so it triggers a BUG. E2fsck does *not* provide this service, and in practice most file systems have their orphan list processed by e2fsck, so to avoid crashing, this patch skips this step if we don't have access to the encryption key (which is the case when processing the orphan list; in all other cases, we will have the encryption key, or the kernel wouldn't have allowed the file to be opened). An open question is whether the fact that e2fsck isn't clearing the bytes beyond i_size causing problems --- and if we've lived with it not doing it for so long, can we drop this from the kernel replay of the orphan list in all cases (not just when we don't have the key for encrypted inodes). Addresses-Google-Bug: #35209576 Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-02-15 00:31:15 +08:00
return 0;
blocksize = inode->i_sb->s_blocksize;
length = blocksize - (offset & (blocksize - 1));
return ext4_block_zero_page_range(handle, mapping, from, length);
}
int ext4_zero_partial_blocks(handle_t *handle, struct inode *inode,
loff_t lstart, loff_t length)
{
struct super_block *sb = inode->i_sb;
struct address_space *mapping = inode->i_mapping;
unsigned partial_start, partial_end;
ext4_fsblk_t start, end;
loff_t byte_end = (lstart + length - 1);
int err = 0;
partial_start = lstart & (sb->s_blocksize - 1);
partial_end = byte_end & (sb->s_blocksize - 1);
start = lstart >> sb->s_blocksize_bits;
end = byte_end >> sb->s_blocksize_bits;
/* Handle partial zero within the single block */
if (start == end &&
(partial_start || (partial_end != sb->s_blocksize - 1))) {
err = ext4_block_zero_page_range(handle, mapping,
lstart, length);
return err;
}
/* Handle partial zero out on the start of the range */
if (partial_start) {
err = ext4_block_zero_page_range(handle, mapping,
lstart, sb->s_blocksize);
if (err)
return err;
}
/* Handle partial zero out on the end of the range */
if (partial_end != sb->s_blocksize - 1)
err = ext4_block_zero_page_range(handle, mapping,
byte_end - partial_end,
partial_end + 1);
return err;
}
int ext4_can_truncate(struct inode *inode)
{
if (S_ISREG(inode->i_mode))
return 1;
if (S_ISDIR(inode->i_mode))
return 1;
if (S_ISLNK(inode->i_mode))
return !ext4_inode_is_fast_symlink(inode);
return 0;
}
/*
* We have to make sure i_disksize gets properly updated before we truncate
* page cache due to hole punching or zero range. Otherwise i_disksize update
* can get lost as it may have been postponed to submission of writeback but
* that will never happen after we truncate page cache.
*/
int ext4_update_disksize_before_punch(struct inode *inode, loff_t offset,
loff_t len)
{
handle_t *handle;
int ret;
loff_t size = i_size_read(inode);
WARN_ON(!inode_is_locked(inode));
if (offset > size || offset + len < size)
return 0;
if (EXT4_I(inode)->i_disksize >= size)
return 0;
handle = ext4_journal_start(inode, EXT4_HT_MISC, 1);
if (IS_ERR(handle))
return PTR_ERR(handle);
ext4_update_i_disksize(inode, size);
ret = ext4_mark_inode_dirty(handle, inode);
ext4_journal_stop(handle);
return ret;
}
static void ext4_wait_dax_page(struct inode *inode)
{
filemap_invalidate_unlock(inode->i_mapping);
schedule();
filemap_invalidate_lock(inode->i_mapping);
}
int ext4_break_layouts(struct inode *inode)
{
struct page *page;
int error;
if (WARN_ON_ONCE(!rwsem_is_locked(&inode->i_mapping->invalidate_lock)))
return -EINVAL;
do {
page = dax_layout_busy_page(inode->i_mapping);
if (!page)
return 0;
error = ___wait_var_event(&page->_refcount,
atomic_read(&page->_refcount) == 1,
TASK_INTERRUPTIBLE, 0, 0,
ext4_wait_dax_page(inode));
} while (error == 0);
return error;
}
/*
* ext4_punch_hole: punches a hole in a file by releasing the blocks
* associated with the given offset and length
*
* @inode: File inode
* @offset: The offset where the hole will begin
* @len: The length of the hole
*
* Returns: 0 on success or negative on failure
*/
int ext4_punch_hole(struct file *file, loff_t offset, loff_t length)
{
struct inode *inode = file_inode(file);
struct super_block *sb = inode->i_sb;
ext4_lblk_t first_block, stop_block;
struct address_space *mapping = inode->i_mapping;
loff_t first_block_offset, last_block_offset, max_length;
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
handle_t *handle;
unsigned int credits;
int ret = 0, ret2 = 0;
trace_ext4_punch_hole(inode, offset, length, 0);
/*
* Write out all dirty pages to avoid race conditions
* Then release them.
*/
if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
ret = filemap_write_and_wait_range(mapping, offset,
offset + length - 1);
if (ret)
return ret;
}
inode_lock(inode);
/* No need to punch hole beyond i_size */
if (offset >= inode->i_size)
goto out_mutex;
/*
* If the hole extends beyond i_size, set the hole
* to end after the page that contains i_size
*/
if (offset + length > inode->i_size) {
length = inode->i_size +
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
PAGE_SIZE - (inode->i_size & (PAGE_SIZE - 1)) -
offset;
}
/*
* For punch hole the length + offset needs to be within one block
* before last range. Adjust the length if it goes beyond that limit.
*/
max_length = sbi->s_bitmap_maxbytes - inode->i_sb->s_blocksize;
if (offset + length > max_length)
length = max_length - offset;
if (offset & (sb->s_blocksize - 1) ||
(offset + length) & (sb->s_blocksize - 1)) {
/*
* Attach jinode to inode for jbd2 if we do any zeroing of
* partial block
*/
ret = ext4_inode_attach_jinode(inode);
if (ret < 0)
goto out_mutex;
}
/* Wait all existing dio workers, newcomers will block on i_rwsem */
inode_dio_wait(inode);
ret = file_modified(file);
if (ret)
goto out_mutex;
/*
* Prevent page faults from reinstantiating pages we have released from
* page cache.
*/
filemap_invalidate_lock(mapping);
ret = ext4_break_layouts(inode);
if (ret)
goto out_dio;
first_block_offset = round_up(offset, sb->s_blocksize);
last_block_offset = round_down((offset + length), sb->s_blocksize) - 1;
/* Now release the pages and zero block aligned part of pages*/
if (last_block_offset > first_block_offset) {
ret = ext4_update_disksize_before_punch(inode, offset, length);
if (ret)
goto out_dio;
truncate_pagecache_range(inode, first_block_offset,
last_block_offset);
}
if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
credits = ext4_writepage_trans_blocks(inode);
else
credits = ext4_blocks_for_truncate(inode);
handle = ext4_journal_start(inode, EXT4_HT_TRUNCATE, credits);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
ext4_std_error(sb, ret);
goto out_dio;
}
ret = ext4_zero_partial_blocks(handle, inode, offset,
length);
if (ret)
goto out_stop;
first_block = (offset + sb->s_blocksize - 1) >>
EXT4_BLOCK_SIZE_BITS(sb);
stop_block = (offset + length) >> EXT4_BLOCK_SIZE_BITS(sb);
/* If there are blocks to remove, do it */
if (stop_block > first_block) {
down_write(&EXT4_I(inode)->i_data_sem);
ext4_discard_preallocations(inode, 0);
ret = ext4_es_remove_extent(inode, first_block,
stop_block - first_block);
if (ret) {
up_write(&EXT4_I(inode)->i_data_sem);
goto out_stop;
}
if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
ret = ext4_ext_remove_space(inode, first_block,
stop_block - 1);
else
ret = ext4_ind_remove_space(handle, inode, first_block,
stop_block);
up_write(&EXT4_I(inode)->i_data_sem);
}
ext4_fc_track_range(handle, inode, first_block, stop_block);
if (IS_SYNC(inode))
ext4_handle_sync(handle);
inode->i_mtime = inode->i_ctime = current_time(inode);
ret2 = ext4_mark_inode_dirty(handle, inode);
if (unlikely(ret2))
ret = ret2;
if (ret >= 0)
ext4_update_inode_fsync_trans(handle, inode, 1);
out_stop:
ext4_journal_stop(handle);
out_dio:
filemap_invalidate_unlock(mapping);
out_mutex:
inode_unlock(inode);
return ret;
}
int ext4_inode_attach_jinode(struct inode *inode)
{
struct ext4_inode_info *ei = EXT4_I(inode);
struct jbd2_inode *jinode;
if (ei->jinode || !EXT4_SB(inode->i_sb)->s_journal)
return 0;
jinode = jbd2_alloc_inode(GFP_KERNEL);
spin_lock(&inode->i_lock);
if (!ei->jinode) {
if (!jinode) {
spin_unlock(&inode->i_lock);
return -ENOMEM;
}
ei->jinode = jinode;
jbd2_journal_init_jbd_inode(ei->jinode, inode);
jinode = NULL;
}
spin_unlock(&inode->i_lock);
if (unlikely(jinode != NULL))
jbd2_free_inode(jinode);
return 0;
}
/*
* ext4_truncate()
*
* We block out ext4_get_block() block instantiations across the entire
* transaction, and VFS/VM ensures that ext4_truncate() cannot run
* simultaneously on behalf of the same inode.
*
* As we work through the truncate and commit bits of it to the journal there
* is one core, guiding principle: the file's tree must always be consistent on
* disk. We must be able to restart the truncate after a crash.
*
* The file's tree may be transiently inconsistent in memory (although it
* probably isn't), but whenever we close off and commit a journal transaction,
* the contents of (the filesystem + the journal) must be consistent and
* restartable. It's pretty simple, really: bottom up, right to left (although
* left-to-right works OK too).
*
* Note that at recovery time, journal replay occurs *before* the restart of
* truncate against the orphan inode list.
*
* The committed inode has the new, desired i_size (which is the same as
* i_disksize in this case). After a crash, ext4_orphan_cleanup() will see
* that this inode's truncate did not complete and it will again call
* ext4_truncate() to have another go. So there will be instantiated blocks
* to the right of the truncation point in a crashed ext4 filesystem. But
* that's fine - as long as they are linked from the inode, the post-crash
* ext4_truncate() run will find them and release them.
*/
int ext4_truncate(struct inode *inode)
{
struct ext4_inode_info *ei = EXT4_I(inode);
unsigned int credits;
int err = 0, err2;
handle_t *handle;
struct address_space *mapping = inode->i_mapping;
/*
* There is a possibility that we're either freeing the inode
* or it's a completely new inode. In those cases we might not
* have i_rwsem locked because it's not necessary.
*/
if (!(inode->i_state & (I_NEW|I_FREEING)))
WARN_ON(!inode_is_locked(inode));
trace_ext4_truncate_enter(inode);
if (!ext4_can_truncate(inode))
goto out_trace;
if (inode->i_size == 0 && !test_opt(inode->i_sb, NO_AUTO_DA_ALLOC))
ext4_set_inode_state(inode, EXT4_STATE_DA_ALLOC_CLOSE);
if (ext4_has_inline_data(inode)) {
int has_inline = 1;
err = ext4_inline_data_truncate(inode, &has_inline);
if (err || has_inline)
goto out_trace;
}
/* If we zero-out tail of the page, we have to create jinode for jbd2 */
if (inode->i_size & (inode->i_sb->s_blocksize - 1)) {
if (ext4_inode_attach_jinode(inode) < 0)
goto out_trace;
}
if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
credits = ext4_writepage_trans_blocks(inode);
else
credits = ext4_blocks_for_truncate(inode);
handle = ext4_journal_start(inode, EXT4_HT_TRUNCATE, credits);
if (IS_ERR(handle)) {
err = PTR_ERR(handle);
goto out_trace;
}
if (inode->i_size & (inode->i_sb->s_blocksize - 1))
ext4_block_truncate_page(handle, mapping, inode->i_size);
/*
* We add the inode to the orphan list, so that if this
* truncate spans multiple transactions, and we crash, we will
* resume the truncate when the filesystem recovers. It also
* marks the inode dirty, to catch the new size.
*
* Implication: the file must always be in a sane, consistent
* truncatable state while each transaction commits.
*/
err = ext4_orphan_add(handle, inode);
if (err)
goto out_stop;
down_write(&EXT4_I(inode)->i_data_sem);
ext4_discard_preallocations(inode, 0);
if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
err = ext4_ext_truncate(handle, inode);
else
ext4_ind_truncate(handle, inode);
up_write(&ei->i_data_sem);
if (err)
goto out_stop;
if (IS_SYNC(inode))
ext4_handle_sync(handle);
out_stop:
/*
* If this was a simple ftruncate() and the file will remain alive,
* then we need to clear up the orphan record which we created above.
* However, if this was a real unlink then we were called by
* ext4_evict_inode(), and we allow that function to clean up the
* orphan info for us.
*/
if (inode->i_nlink)
ext4_orphan_del(handle, inode);
inode->i_mtime = inode->i_ctime = current_time(inode);
err2 = ext4_mark_inode_dirty(handle, inode);
if (unlikely(err2 && !err))
err = err2;
ext4_journal_stop(handle);
out_trace:
trace_ext4_truncate_exit(inode);
return err;
}
static inline u64 ext4_inode_peek_iversion(const struct inode *inode)
{
if (unlikely(EXT4_I(inode)->i_flags & EXT4_EA_INODE_FL))
return inode_peek_iversion_raw(inode);
else
return inode_peek_iversion(inode);
}
static int ext4_inode_blocks_set(struct ext4_inode *raw_inode,
struct ext4_inode_info *ei)
{
struct inode *inode = &(ei->vfs_inode);
u64 i_blocks = READ_ONCE(inode->i_blocks);
struct super_block *sb = inode->i_sb;
if (i_blocks <= ~0U) {
/*
* i_blocks can be represented in a 32 bit variable
* as multiple of 512 bytes
*/
raw_inode->i_blocks_lo = cpu_to_le32(i_blocks);
raw_inode->i_blocks_high = 0;
ext4_clear_inode_flag(inode, EXT4_INODE_HUGE_FILE);
return 0;
}
/*
* This should never happen since sb->s_maxbytes should not have
* allowed this, sb->s_maxbytes was set according to the huge_file
* feature in ext4_fill_super().
*/
if (!ext4_has_feature_huge_file(sb))
return -EFSCORRUPTED;
if (i_blocks <= 0xffffffffffffULL) {
/*
* i_blocks can be represented in a 48 bit variable
* as multiple of 512 bytes
*/
raw_inode->i_blocks_lo = cpu_to_le32(i_blocks);
raw_inode->i_blocks_high = cpu_to_le16(i_blocks >> 32);
ext4_clear_inode_flag(inode, EXT4_INODE_HUGE_FILE);
} else {
ext4_set_inode_flag(inode, EXT4_INODE_HUGE_FILE);
/* i_block is stored in file system block size */
i_blocks = i_blocks >> (inode->i_blkbits - 9);
raw_inode->i_blocks_lo = cpu_to_le32(i_blocks);
raw_inode->i_blocks_high = cpu_to_le16(i_blocks >> 32);
}
return 0;
}
static int ext4_fill_raw_inode(struct inode *inode, struct ext4_inode *raw_inode)
{
struct ext4_inode_info *ei = EXT4_I(inode);
uid_t i_uid;
gid_t i_gid;
projid_t i_projid;
int block;
int err;
err = ext4_inode_blocks_set(raw_inode, ei);
raw_inode->i_mode = cpu_to_le16(inode->i_mode);
i_uid = i_uid_read(inode);
i_gid = i_gid_read(inode);
i_projid = from_kprojid(&init_user_ns, ei->i_projid);
if (!(test_opt(inode->i_sb, NO_UID32))) {
raw_inode->i_uid_low = cpu_to_le16(low_16_bits(i_uid));
raw_inode->i_gid_low = cpu_to_le16(low_16_bits(i_gid));
/*
* Fix up interoperability with old kernels. Otherwise,
* old inodes get re-used with the upper 16 bits of the
* uid/gid intact.
*/
if (ei->i_dtime && list_empty(&ei->i_orphan)) {
raw_inode->i_uid_high = 0;
raw_inode->i_gid_high = 0;
} else {
raw_inode->i_uid_high =
cpu_to_le16(high_16_bits(i_uid));
raw_inode->i_gid_high =
cpu_to_le16(high_16_bits(i_gid));
}
} else {
raw_inode->i_uid_low = cpu_to_le16(fs_high2lowuid(i_uid));
raw_inode->i_gid_low = cpu_to_le16(fs_high2lowgid(i_gid));
raw_inode->i_uid_high = 0;
raw_inode->i_gid_high = 0;
}
raw_inode->i_links_count = cpu_to_le16(inode->i_nlink);
EXT4_INODE_SET_XTIME(i_ctime, inode, raw_inode);
EXT4_INODE_SET_XTIME(i_mtime, inode, raw_inode);
EXT4_INODE_SET_XTIME(i_atime, inode, raw_inode);
EXT4_EINODE_SET_XTIME(i_crtime, ei, raw_inode);
raw_inode->i_dtime = cpu_to_le32(ei->i_dtime);
raw_inode->i_flags = cpu_to_le32(ei->i_flags & 0xFFFFFFFF);
if (likely(!test_opt2(inode->i_sb, HURD_COMPAT)))
raw_inode->i_file_acl_high =
cpu_to_le16(ei->i_file_acl >> 32);
raw_inode->i_file_acl_lo = cpu_to_le32(ei->i_file_acl);
ext4_isize_set(raw_inode, ei->i_disksize);
raw_inode->i_generation = cpu_to_le32(inode->i_generation);
if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode)) {
if (old_valid_dev(inode->i_rdev)) {
raw_inode->i_block[0] =
cpu_to_le32(old_encode_dev(inode->i_rdev));
raw_inode->i_block[1] = 0;
} else {
raw_inode->i_block[0] = 0;
raw_inode->i_block[1] =
cpu_to_le32(new_encode_dev(inode->i_rdev));
raw_inode->i_block[2] = 0;
}
} else if (!ext4_has_inline_data(inode)) {
for (block = 0; block < EXT4_N_BLOCKS; block++)
raw_inode->i_block[block] = ei->i_data[block];
}
if (likely(!test_opt2(inode->i_sb, HURD_COMPAT))) {
u64 ivers = ext4_inode_peek_iversion(inode);
raw_inode->i_disk_version = cpu_to_le32(ivers);
if (ei->i_extra_isize) {
if (EXT4_FITS_IN_INODE(raw_inode, ei, i_version_hi))
raw_inode->i_version_hi =
cpu_to_le32(ivers >> 32);
raw_inode->i_extra_isize =
cpu_to_le16(ei->i_extra_isize);
}
}
if (i_projid != EXT4_DEF_PROJID &&
!ext4_has_feature_project(inode->i_sb))
err = err ?: -EFSCORRUPTED;
if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE &&
EXT4_FITS_IN_INODE(raw_inode, ei, i_projid))
raw_inode->i_projid = cpu_to_le32(i_projid);
ext4_inode_csum_set(inode, raw_inode, ei);
return err;
}
/*
* ext4_get_inode_loc returns with an extra refcount against the inode's
* underlying buffer_head on success. If we pass 'inode' and it does not
* have in-inode xattr, we have all inode data in memory that is needed
* to recreate the on-disk version of this inode.
*/
static int __ext4_get_inode_loc(struct super_block *sb, unsigned long ino,
struct inode *inode, struct ext4_iloc *iloc,
ext4_fsblk_t *ret_block)
{
struct ext4_group_desc *gdp;
struct buffer_head *bh;
ext4_fsblk_t block;
struct blk_plug plug;
int inodes_per_block, inode_offset;
iloc->bh = NULL;
if (ino < EXT4_ROOT_INO ||
ino > le32_to_cpu(EXT4_SB(sb)->s_es->s_inodes_count))
return -EFSCORRUPTED;
iloc->block_group = (ino - 1) / EXT4_INODES_PER_GROUP(sb);
gdp = ext4_get_group_desc(sb, iloc->block_group, NULL);
if (!gdp)
return -EIO;
/*
* Figure out the offset within the block group inode table
*/
inodes_per_block = EXT4_SB(sb)->s_inodes_per_block;
inode_offset = ((ino - 1) %
EXT4_INODES_PER_GROUP(sb));
block = ext4_inode_table(sb, gdp) + (inode_offset / inodes_per_block);
iloc->offset = (inode_offset % inodes_per_block) * EXT4_INODE_SIZE(sb);
bh = sb_getblk(sb, block);
if (unlikely(!bh))
return -ENOMEM;
if (ext4_buffer_uptodate(bh))
goto has_buffer;
lock_buffer(bh);
if (ext4_buffer_uptodate(bh)) {
/* Someone brought it uptodate while we waited */
unlock_buffer(bh);
goto has_buffer;
}
/*
* If we have all information of the inode in memory and this
* is the only valid inode in the block, we need not read the
* block.
*/
if (inode && !ext4_test_inode_state(inode, EXT4_STATE_XATTR)) {
struct buffer_head *bitmap_bh;
int i, start;
start = inode_offset & ~(inodes_per_block - 1);
/* Is the inode bitmap in cache? */
bitmap_bh = sb_getblk(sb, ext4_inode_bitmap(sb, gdp));
if (unlikely(!bitmap_bh))
goto make_io;
/*
* If the inode bitmap isn't in cache then the
* optimisation may end up performing two reads instead
* of one, so skip it.
*/
if (!buffer_uptodate(bitmap_bh)) {
brelse(bitmap_bh);
goto make_io;
}
for (i = start; i < start + inodes_per_block; i++) {
if (i == inode_offset)
continue;
if (ext4_test_bit(i, bitmap_bh->b_data))
break;
}
brelse(bitmap_bh);
if (i == start + inodes_per_block) {
struct ext4_inode *raw_inode =
(struct ext4_inode *) (bh->b_data + iloc->offset);
/* all other inodes are free, so skip I/O */
memset(bh->b_data, 0, bh->b_size);
if (!ext4_test_inode_state(inode, EXT4_STATE_NEW))
ext4_fill_raw_inode(inode, raw_inode);
set_buffer_uptodate(bh);
unlock_buffer(bh);
goto has_buffer;
}
}
make_io:
/*
* If we need to do any I/O, try to pre-readahead extra
* blocks from the inode table.
*/
blk_start_plug(&plug);
if (EXT4_SB(sb)->s_inode_readahead_blks) {
ext4_fsblk_t b, end, table;
unsigned num;
__u32 ra_blks = EXT4_SB(sb)->s_inode_readahead_blks;
table = ext4_inode_table(sb, gdp);
/* s_inode_readahead_blks is always a power of 2 */
b = block & ~((ext4_fsblk_t) ra_blks - 1);
if (table > b)
b = table;
end = b + ra_blks;
num = EXT4_INODES_PER_GROUP(sb);
if (ext4_has_group_desc_csum(sb))
num -= ext4_itable_unused_count(sb, gdp);
table += num / inodes_per_block;
if (end > table)
end = table;
while (b <= end)
ext4_sb_breadahead_unmovable(sb, b++);
}
/*
* There are other valid inodes in the buffer, this inode
* has in-inode xattrs, or we don't have this inode in memory.
* Read the block from disk.
*/
trace_ext4_load_inode(sb, ino);
ext4_read_bh_nowait(bh, REQ_META | REQ_PRIO, NULL);
blk_finish_plug(&plug);
wait_on_buffer(bh);
ext4_simulate_fail_bh(sb, bh, EXT4_SIM_INODE_EIO);
if (!buffer_uptodate(bh)) {
if (ret_block)
*ret_block = block;
brelse(bh);
return -EIO;
}
has_buffer:
iloc->bh = bh;
return 0;
}
static int __ext4_get_inode_loc_noinmem(struct inode *inode,
struct ext4_iloc *iloc)
{
ext4_fsblk_t err_blk = 0;
int ret;
ret = __ext4_get_inode_loc(inode->i_sb, inode->i_ino, NULL, iloc,
&err_blk);
if (ret == -EIO)
ext4_error_inode_block(inode, err_blk, EIO,
"unable to read itable block");
return ret;
}
int ext4_get_inode_loc(struct inode *inode, struct ext4_iloc *iloc)
{
ext4_fsblk_t err_blk = 0;
int ret;
ret = __ext4_get_inode_loc(inode->i_sb, inode->i_ino, inode, iloc,
&err_blk);
if (ret == -EIO)
ext4_error_inode_block(inode, err_blk, EIO,
"unable to read itable block");
return ret;
}
int ext4_get_fc_inode_loc(struct super_block *sb, unsigned long ino,
struct ext4_iloc *iloc)
{
return __ext4_get_inode_loc(sb, ino, NULL, iloc, NULL);
}
static bool ext4_should_enable_dax(struct inode *inode)
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
if (test_opt2(inode->i_sb, DAX_NEVER))
return false;
if (!S_ISREG(inode->i_mode))
return false;
if (ext4_should_journal_data(inode))
return false;
if (ext4_has_inline_data(inode))
return false;
if (ext4_test_inode_flag(inode, EXT4_INODE_ENCRYPT))
return false;
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
if (ext4_test_inode_flag(inode, EXT4_INODE_VERITY))
return false;
if (!test_bit(EXT4_FLAGS_BDEV_IS_DAX, &sbi->s_ext4_flags))
return false;
if (test_opt(inode->i_sb, DAX_ALWAYS))
return true;
return ext4_test_inode_flag(inode, EXT4_INODE_DAX);
}
void ext4_set_inode_flags(struct inode *inode, bool init)
{
unsigned int flags = EXT4_I(inode)->i_flags;
unsigned int new_fl = 0;
WARN_ON_ONCE(IS_DAX(inode) && init);
if (flags & EXT4_SYNC_FL)
new_fl |= S_SYNC;
if (flags & EXT4_APPEND_FL)
new_fl |= S_APPEND;
if (flags & EXT4_IMMUTABLE_FL)
new_fl |= S_IMMUTABLE;
if (flags & EXT4_NOATIME_FL)
new_fl |= S_NOATIME;
if (flags & EXT4_DIRSYNC_FL)
new_fl |= S_DIRSYNC;
/* Because of the way inode_set_flags() works we must preserve S_DAX
* here if already set. */
new_fl |= (inode->i_flags & S_DAX);
if (init && ext4_should_enable_dax(inode))
new_fl |= S_DAX;
if (flags & EXT4_ENCRYPT_FL)
new_fl |= S_ENCRYPTED;
ext4: Support case-insensitive file name lookups This patch implements the actual support for case-insensitive file name lookups in ext4, based on the feature bit and the encoding stored in the superblock. A filesystem that has the casefold feature set is able to configure directories with the +F (EXT4_CASEFOLD_FL) attribute, enabling lookups to succeed in that directory in a case-insensitive fashion, i.e: match a directory entry even if the name used by userspace is not a byte per byte match with the disk name, but is an equivalent case-insensitive version of the Unicode string. This operation is called a case-insensitive file name lookup. The feature is configured as an inode attribute applied to directories and inherited by its children. This attribute can only be enabled on empty directories for filesystems that support the encoding feature, thus preventing collision of file names that only differ by case. * dcache handling: For a +F directory, Ext4 only stores the first equivalent name dentry used in the dcache. This is done to prevent unintentional duplication of dentries in the dcache, while also allowing the VFS code to quickly find the right entry in the cache despite which equivalent string was used in a previous lookup, without having to resort to ->lookup(). d_hash() of casefolded directories is implemented as the hash of the casefolded string, such that we always have a well-known bucket for all the equivalencies of the same string. d_compare() uses the utf8_strncasecmp() infrastructure, which handles the comparison of equivalent, same case, names as well. For now, negative lookups are not inserted in the dcache, since they would need to be invalidated anyway, because we can't trust missing file dentries. This is bad for performance but requires some leveraging of the vfs layer to fix. We can live without that for now, and so does everyone else. * on-disk data: Despite using a specific version of the name as the internal representation within the dcache, the name stored and fetched from the disk is a byte-per-byte match with what the user requested, making this implementation 'name-preserving'. i.e. no actual information is lost when writing to storage. DX is supported by modifying the hashes used in +F directories to make them case/encoding-aware. The new disk hashes are calculated as the hash of the full casefolded string, instead of the string directly. This allows us to efficiently search for file names in the htree without requiring the user to provide an exact name. * Dealing with invalid sequences: By default, when a invalid UTF-8 sequence is identified, ext4 will treat it as an opaque byte sequence, ignoring the encoding and reverting to the old behavior for that unique file. This means that case-insensitive file name lookup will not work only for that file. An optional bit can be set in the superblock telling the filesystem code and userspace tools to enforce the encoding. When that optional bit is set, any attempt to create a file name using an invalid UTF-8 sequence will fail and return an error to userspace. * Normalization algorithm: The UTF-8 algorithms used to compare strings in ext4 is implemented lives in fs/unicode, and is based on a previous version developed by SGI. It implements the Canonical decomposition (NFD) algorithm described by the Unicode specification 12.1, or higher, combined with the elimination of ignorable code points (NFDi) and full case-folding (CF) as documented in fs/unicode/utf8_norm.c. NFD seems to be the best normalization method for EXT4 because: - It has a lower cost than NFC/NFKC (which requires decomposing to NFD as an intermediary step) - It doesn't eliminate important semantic meaning like compatibility decompositions. Although: - This implementation is not completely linguistic accurate, because different languages have conflicting rules, which would require the specialization of the filesystem to a given locale, which brings all sorts of problems for removable media and for users who use more than one language. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-26 02:12:08 +08:00
if (flags & EXT4_CASEFOLD_FL)
new_fl |= S_CASEFOLD;
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
if (flags & EXT4_VERITY_FL)
new_fl |= S_VERITY;
inode_set_flags(inode, new_fl,
S_SYNC|S_APPEND|S_IMMUTABLE|S_NOATIME|S_DIRSYNC|S_DAX|
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
S_ENCRYPTED|S_CASEFOLD|S_VERITY);
}
static blkcnt_t ext4_inode_blocks(struct ext4_inode *raw_inode,
struct ext4_inode_info *ei)
{
blkcnt_t i_blocks ;
struct inode *inode = &(ei->vfs_inode);
struct super_block *sb = inode->i_sb;
if (ext4_has_feature_huge_file(sb)) {
/* we are using combined 48 bit field */
i_blocks = ((u64)le16_to_cpu(raw_inode->i_blocks_high)) << 32 |
le32_to_cpu(raw_inode->i_blocks_lo);
if (ext4_test_inode_flag(inode, EXT4_INODE_HUGE_FILE)) {
/* i_blocks represent file system block size */
return i_blocks << (inode->i_blkbits - 9);
} else {
return i_blocks;
}
} else {
return le32_to_cpu(raw_inode->i_blocks_lo);
}
}
static inline int ext4_iget_extra_inode(struct inode *inode,
struct ext4_inode *raw_inode,
struct ext4_inode_info *ei)
{
__le32 *magic = (void *)raw_inode +
EXT4_GOOD_OLD_INODE_SIZE + ei->i_extra_isize;
if (EXT4_GOOD_OLD_INODE_SIZE + ei->i_extra_isize + sizeof(__le32) <=
EXT4_INODE_SIZE(inode->i_sb) &&
*magic == cpu_to_le32(EXT4_XATTR_MAGIC)) {
ext4_set_inode_state(inode, EXT4_STATE_XATTR);
return ext4_find_inline_data_nolock(inode);
} else
EXT4_I(inode)->i_inline_off = 0;
return 0;
}
int ext4_get_projid(struct inode *inode, kprojid_t *projid)
{
if (!ext4_has_feature_project(inode->i_sb))
return -EOPNOTSUPP;
*projid = EXT4_I(inode)->i_projid;
return 0;
}
/*
* ext4 has self-managed i_version for ea inodes, it stores the lower 32bit of
* refcount in i_version, so use raw values if inode has EXT4_EA_INODE_FL flag
* set.
*/
static inline void ext4_inode_set_iversion_queried(struct inode *inode, u64 val)
{
if (unlikely(EXT4_I(inode)->i_flags & EXT4_EA_INODE_FL))
inode_set_iversion_raw(inode, val);
else
inode_set_iversion_queried(inode, val);
}
struct inode *__ext4_iget(struct super_block *sb, unsigned long ino,
ext4_iget_flags flags, const char *function,
unsigned int line)
{
struct ext4_iloc iloc;
struct ext4_inode *raw_inode;
struct ext4_inode_info *ei;
struct ext4_super_block *es = EXT4_SB(sb)->s_es;
struct inode *inode;
journal_t *journal = EXT4_SB(sb)->s_journal;
long ret;
loff_t size;
int block;
uid_t i_uid;
gid_t i_gid;
projid_t i_projid;
if ((!(flags & EXT4_IGET_SPECIAL) &&
((ino < EXT4_FIRST_INO(sb) && ino != EXT4_ROOT_INO) ||
ino == le32_to_cpu(es->s_usr_quota_inum) ||
ino == le32_to_cpu(es->s_grp_quota_inum) ||
ext4: Speedup ext4 orphan inode handling Ext4 orphan inode handling is a bottleneck for workloads which heavily truncate / unlink small files since it contends on the global s_orphan_mutex lock (and generally it's difficult to improve scalability of the ondisk linked list of orphaned inodes). This patch implements new way of handling orphan inodes. Instead of linking orphaned inode into a linked list, we store it's inode number in a new special file which we call "orphan file". Only if there's no more space in the orphan file (too many inodes are currently orphaned) we fall back to using old style linked list. Currently we protect operations in the orphan file with a spinlock for simplicity but even in this setting we can substantially reduce the length of the critical section and thus speedup some workloads. In the next patch we improve this by making orphan handling lockless. Note that the change is backwards compatible when the filesystem is clean - the existence of the orphan file is a compat feature, we set another ro-compat feature indicating orphan file needs scanning for orphaned inodes when mounting filesystem read-write. This ro-compat feature gets cleared on unmount / remount read-only. Some performance data from 80 CPU Xeon Server with 512 GB of RAM, filesystem located on SSD, average of 5 runs: stress-orphan (microbenchmark truncating files byte-by-byte from N processes in parallel) Threads Time Time Vanilla Patched 1 1.057200 0.945600 2 1.680400 1.331800 4 2.547000 1.995000 8 7.049400 6.424200 16 14.827800 14.937600 32 40.948200 33.038200 64 87.787400 60.823600 128 206.504000 122.941400 So we can see significant wins all over the board. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210816095713.16537-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-08-16 17:57:06 +08:00
ino == le32_to_cpu(es->s_prj_quota_inum) ||
ino == le32_to_cpu(es->s_orphan_file_inum))) ||
(ino < EXT4_ROOT_INO) ||
(ino > le32_to_cpu(es->s_inodes_count))) {
if (flags & EXT4_IGET_HANDLE)
return ERR_PTR(-ESTALE);
__ext4_error(sb, function, line, false, EFSCORRUPTED, 0,
"inode #%lu: comm %s: iget: illegal inode #",
ino, current->comm);
return ERR_PTR(-EFSCORRUPTED);
}
inode = iget_locked(sb, ino);
if (!inode)
return ERR_PTR(-ENOMEM);
if (!(inode->i_state & I_NEW))
return inode;
ei = EXT4_I(inode);
iloc.bh = NULL;
ret = __ext4_get_inode_loc_noinmem(inode, &iloc);
if (ret < 0)
goto bad_inode;
raw_inode = ext4_raw_inode(&iloc);
if ((ino == EXT4_ROOT_INO) && (raw_inode->i_links_count == 0)) {
ext4_error_inode(inode, function, line, 0,
"iget: root inode unallocated");
ret = -EFSCORRUPTED;
goto bad_inode;
}
if ((flags & EXT4_IGET_HANDLE) &&
(raw_inode->i_links_count == 0) && (raw_inode->i_mode == 0)) {
ret = -ESTALE;
goto bad_inode;
}
if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE) {
ei->i_extra_isize = le16_to_cpu(raw_inode->i_extra_isize);
if (EXT4_GOOD_OLD_INODE_SIZE + ei->i_extra_isize >
EXT4_INODE_SIZE(inode->i_sb) ||
(ei->i_extra_isize & 3)) {
ext4_error_inode(inode, function, line, 0,
"iget: bad extra_isize %u "
"(inode size %u)",
ei->i_extra_isize,
EXT4_INODE_SIZE(inode->i_sb));
ret = -EFSCORRUPTED;
goto bad_inode;
}
} else
ei->i_extra_isize = 0;
/* Precompute checksum seed for inode metadata */
if (ext4_has_metadata_csum(sb)) {
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
__u32 csum;
__le32 inum = cpu_to_le32(inode->i_ino);
__le32 gen = raw_inode->i_generation;
csum = ext4_chksum(sbi, sbi->s_csum_seed, (__u8 *)&inum,
sizeof(inum));
ei->i_csum_seed = ext4_chksum(sbi, csum, (__u8 *)&gen,
sizeof(gen));
}
if ((!ext4_inode_csum_verify(inode, raw_inode, ei) ||
ext4_simulate_fail(sb, EXT4_SIM_INODE_CRC)) &&
(!(EXT4_SB(sb)->s_mount_state & EXT4_FC_REPLAY))) {
ext4_error_inode_err(inode, function, line, 0,
EFSBADCRC, "iget: checksum invalid");
ret = -EFSBADCRC;
goto bad_inode;
}
inode->i_mode = le16_to_cpu(raw_inode->i_mode);
i_uid = (uid_t)le16_to_cpu(raw_inode->i_uid_low);
i_gid = (gid_t)le16_to_cpu(raw_inode->i_gid_low);
if (ext4_has_feature_project(sb) &&
EXT4_INODE_SIZE(sb) > EXT4_GOOD_OLD_INODE_SIZE &&
EXT4_FITS_IN_INODE(raw_inode, ei, i_projid))
i_projid = (projid_t)le32_to_cpu(raw_inode->i_projid);
else
i_projid = EXT4_DEF_PROJID;
if (!(test_opt(inode->i_sb, NO_UID32))) {
i_uid |= le16_to_cpu(raw_inode->i_uid_high) << 16;
i_gid |= le16_to_cpu(raw_inode->i_gid_high) << 16;
}
i_uid_write(inode, i_uid);
i_gid_write(inode, i_gid);
ei->i_projid = make_kprojid(&init_user_ns, i_projid);
set_nlink(inode, le16_to_cpu(raw_inode->i_links_count));
ext4_clear_state_flags(ei); /* Only relevant on 32-bit archs */
ei->i_inline_off = 0;
ei->i_dir_start_lookup = 0;
ei->i_dtime = le32_to_cpu(raw_inode->i_dtime);
/* We now have enough fields to check if the inode was active or not.
* This is needed because nfsd might try to access dead inodes
* the test is that same one that e2fsck uses
* NeilBrown 1999oct15
*/
if (inode->i_nlink == 0) {
if ((inode->i_mode == 0 ||
!(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_ORPHAN_FS)) &&
ino != EXT4_BOOT_LOADER_INO) {
/* this inode is deleted */
ret = -ESTALE;
goto bad_inode;
}
/* The only unlinked inodes we let through here have
* valid i_mode and are being read by the orphan
* recovery code: that's fine, we're about to complete
* the process of deleting those.
* OR it is the EXT4_BOOT_LOADER_INO which is
* not initialized on a new filesystem. */
}
ei->i_flags = le32_to_cpu(raw_inode->i_flags);
ext4_set_inode_flags(inode, true);
inode->i_blocks = ext4_inode_blocks(raw_inode, ei);
ei->i_file_acl = le32_to_cpu(raw_inode->i_file_acl_lo);
if (ext4_has_feature_64bit(sb))
ei->i_file_acl |=
((__u64)le16_to_cpu(raw_inode->i_file_acl_high)) << 32;
inode->i_size = ext4_isize(sb, raw_inode);
if ((size = i_size_read(inode)) < 0) {
ext4_error_inode(inode, function, line, 0,
"iget: bad i_size value: %lld", size);
ret = -EFSCORRUPTED;
goto bad_inode;
}
ext4: fix checksum errors with indexed dirs DIR_INDEX has been introduced as a compat ext4 feature. That means that even kernels / tools that don't understand the feature may modify the filesystem. This works because for kernels not understanding indexed dir format, internal htree nodes appear just as empty directory entries. Index dir aware kernels then check the htree structure is still consistent before using the data. This all worked reasonably well until metadata checksums were introduced. The problem is that these effectively made DIR_INDEX only ro-compatible because internal htree nodes store checksums in a different place than normal directory blocks. Thus any modification ignorant to DIR_INDEX (or just clearing EXT4_INDEX_FL from the inode) will effectively cause checksum mismatch and trigger kernel errors. So we have to be more careful when dealing with indexed directories on filesystems with checksumming enabled. 1) We just disallow loading any directory inodes with EXT4_INDEX_FL when DIR_INDEX is not enabled. This is harsh but it should be very rare (it means someone disabled DIR_INDEX on existing filesystem and didn't run e2fsck), e2fsck can fix the problem, and we don't want to answer the difficult question: "Should we rather corrupt the directory more or should we ignore that DIR_INDEX feature is not set?" 2) When we find out htree structure is corrupted (but the filesystem and the directory should in support htrees), we continue just ignoring htree information for reading but we refuse to add new entries to the directory to avoid corrupting it more. Link: https://lore.kernel.org/r/20200210144316.22081-1-jack@suse.cz Fixes: dbe89444042a ("ext4: Calculate and verify checksums for htree nodes") Reviewed-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2020-02-10 22:43:16 +08:00
/*
* If dir_index is not enabled but there's dir with INDEX flag set,
* we'd normally treat htree data as empty space. But with metadata
* checksumming that corrupts checksums so forbid that.
*/
if (!ext4_has_feature_dir_index(sb) && ext4_has_metadata_csum(sb) &&
ext4_test_inode_flag(inode, EXT4_INODE_INDEX)) {
ext4_error_inode(inode, function, line, 0,
"iget: Dir with htree data on filesystem without dir_index feature.");
ret = -EFSCORRUPTED;
goto bad_inode;
}
ei->i_disksize = inode->i_size;
#ifdef CONFIG_QUOTA
ei->i_reserved_quota = 0;
#endif
inode->i_generation = le32_to_cpu(raw_inode->i_generation);
ei->i_block_group = iloc.block_group;
ei->i_last_alloc_group = ~0;
/*
* NOTE! The in-memory inode i_data array is in little-endian order
* even on big-endian machines: we do NOT byteswap the block numbers!
*/
for (block = 0; block < EXT4_N_BLOCKS; block++)
ei->i_data[block] = raw_inode->i_block[block];
INIT_LIST_HEAD(&ei->i_orphan);
ext4_fc_init_inode(&ei->vfs_inode);
/*
* Set transaction id's of transactions that have to be committed
* to finish f[data]sync. We set them to currently running transaction
* as we cannot be sure that the inode or some of its metadata isn't
* part of the transaction - the inode could have been reclaimed and
* now it is reread from disk.
*/
if (journal) {
transaction_t *transaction;
tid_t tid;
read_lock(&journal->j_state_lock);
if (journal->j_running_transaction)
transaction = journal->j_running_transaction;
else
transaction = journal->j_committing_transaction;
if (transaction)
tid = transaction->t_tid;
else
tid = journal->j_commit_sequence;
read_unlock(&journal->j_state_lock);
ei->i_sync_tid = tid;
ei->i_datasync_tid = tid;
}
if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE) {
if (ei->i_extra_isize == 0) {
/* The extra space is currently unused. Use it. */
BUILD_BUG_ON(sizeof(struct ext4_inode) & 3);
ei->i_extra_isize = sizeof(struct ext4_inode) -
EXT4_GOOD_OLD_INODE_SIZE;
} else {
ret = ext4_iget_extra_inode(inode, raw_inode, ei);
if (ret)
goto bad_inode;
}
}
EXT4_INODE_GET_XTIME(i_ctime, inode, raw_inode);
EXT4_INODE_GET_XTIME(i_mtime, inode, raw_inode);
EXT4_INODE_GET_XTIME(i_atime, inode, raw_inode);
EXT4_EINODE_GET_XTIME(i_crtime, ei, raw_inode);
if (likely(!test_opt2(inode->i_sb, HURD_COMPAT))) {
u64 ivers = le32_to_cpu(raw_inode->i_disk_version);
if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE) {
if (EXT4_FITS_IN_INODE(raw_inode, ei, i_version_hi))
ivers |=
(__u64)(le32_to_cpu(raw_inode->i_version_hi)) << 32;
}
ext4_inode_set_iversion_queried(inode, ivers);
}
ret = 0;
if (ei->i_file_acl &&
2020-07-28 21:04:34 +08:00
!ext4_inode_block_valid(inode, ei->i_file_acl, 1)) {
ext4_error_inode(inode, function, line, 0,
"iget: bad extended attribute block %llu",
ei->i_file_acl);
ret = -EFSCORRUPTED;
goto bad_inode;
} else if (!ext4_has_inline_data(inode)) {
/* validate the block references in the inode */
if (!(EXT4_SB(sb)->s_mount_state & EXT4_FC_REPLAY) &&
(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
(S_ISLNK(inode->i_mode) &&
!ext4_inode_is_fast_symlink(inode)))) {
if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
ret = ext4_ext_check_inode(inode);
else
ret = ext4_ind_check_inode(inode);
}
}
if (ret)
goto bad_inode;
if (S_ISREG(inode->i_mode)) {
inode->i_op = &ext4_file_inode_operations;
inode->i_fop = &ext4_file_operations;
ext4_set_aops(inode);
} else if (S_ISDIR(inode->i_mode)) {
inode->i_op = &ext4_dir_inode_operations;
inode->i_fop = &ext4_dir_operations;
} else if (S_ISLNK(inode->i_mode)) {
/* VFS does not allow setting these so must be corruption */
if (IS_APPEND(inode) || IS_IMMUTABLE(inode)) {
ext4_error_inode(inode, function, line, 0,
"iget: immutable or append flags "
"not allowed on symlinks");
ret = -EFSCORRUPTED;
goto bad_inode;
}
if (IS_ENCRYPTED(inode)) {
inode->i_op = &ext4_encrypted_symlink_inode_operations;
} else if (ext4_inode_is_fast_symlink(inode)) {
inode->i_link = (char *)ei->i_data;
inode->i_op = &ext4_fast_symlink_inode_operations;
nd_terminate_link(ei->i_data, inode->i_size,
sizeof(ei->i_data) - 1);
} else {
inode->i_op = &ext4_symlink_inode_operations;
}
} else if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode) ||
S_ISFIFO(inode->i_mode) || S_ISSOCK(inode->i_mode)) {
inode->i_op = &ext4_special_inode_operations;
if (raw_inode->i_block[0])
init_special_inode(inode, inode->i_mode,
old_decode_dev(le32_to_cpu(raw_inode->i_block[0])));
else
init_special_inode(inode, inode->i_mode,
new_decode_dev(le32_to_cpu(raw_inode->i_block[1])));
} else if (ino == EXT4_BOOT_LOADER_INO) {
make_bad_inode(inode);
} else {
ret = -EFSCORRUPTED;
ext4_error_inode(inode, function, line, 0,
"iget: bogus i_mode (%o)", inode->i_mode);
goto bad_inode;
}
if (IS_CASEFOLDED(inode) && !ext4_has_feature_casefold(inode->i_sb))
ext4_error_inode(inode, function, line, 0,
"casefold flag without casefold feature");
brelse(iloc.bh);
unlock_new_inode(inode);
return inode;
bad_inode:
brelse(iloc.bh);
iget_failed(inode);
return ERR_PTR(ret);
}
static void __ext4_update_other_inode_time(struct super_block *sb,
unsigned long orig_ino,
unsigned long ino,
struct ext4_inode *raw_inode)
{
struct inode *inode;
inode = find_inode_by_ino_rcu(sb, ino);
if (!inode)
return;
if (!inode_is_dirtytime_only(inode))
return;
spin_lock(&inode->i_lock);
if (inode_is_dirtytime_only(inode)) {
struct ext4_inode_info *ei = EXT4_I(inode);
inode->i_state &= ~I_DIRTY_TIME;
spin_unlock(&inode->i_lock);
spin_lock(&ei->i_raw_lock);
EXT4_INODE_SET_XTIME(i_ctime, inode, raw_inode);
EXT4_INODE_SET_XTIME(i_mtime, inode, raw_inode);
EXT4_INODE_SET_XTIME(i_atime, inode, raw_inode);
ext4_inode_csum_set(inode, raw_inode, ei);
spin_unlock(&ei->i_raw_lock);
trace_ext4_other_inode_update_time(inode, orig_ino);
return;
}
spin_unlock(&inode->i_lock);
}
/*
* Opportunistically update the other time fields for other inodes in
* the same inode table block.
*/
static void ext4_update_other_inodes_time(struct super_block *sb,
unsigned long orig_ino, char *buf)
{
unsigned long ino;
int i, inodes_per_block = EXT4_SB(sb)->s_inodes_per_block;
int inode_size = EXT4_INODE_SIZE(sb);
/*
* Calculate the first inode in the inode table block. Inode
* numbers are one-based. That is, the first inode in a block
* (assuming 4k blocks and 256 byte inodes) is (n*16 + 1).
*/
ino = ((orig_ino - 1) & ~(inodes_per_block - 1)) + 1;
rcu_read_lock();
for (i = 0; i < inodes_per_block; i++, ino++, buf += inode_size) {
if (ino == orig_ino)
continue;
__ext4_update_other_inode_time(sb, orig_ino, ino,
(struct ext4_inode *)buf);
}
rcu_read_unlock();
}
/*
* Post the struct inode info into an on-disk inode location in the
* buffer-cache. This gobbles the caller's reference to the
* buffer_head in the inode location struct.
*
* The caller must have write access to iloc->bh.
*/
static int ext4_do_update_inode(handle_t *handle,
struct inode *inode,
struct ext4_iloc *iloc)
{
struct ext4_inode *raw_inode = ext4_raw_inode(iloc);
struct ext4_inode_info *ei = EXT4_I(inode);
struct buffer_head *bh = iloc->bh;
struct super_block *sb = inode->i_sb;
int err;
int need_datasync = 0, set_large_file = 0;
spin_lock(&ei->i_raw_lock);
/*
* For fields not tracked in the in-memory inode, initialise them
* to zero for new inodes.
*/
if (ext4_test_inode_state(inode, EXT4_STATE_NEW))
memset(raw_inode, 0, EXT4_SB(inode->i_sb)->s_inode_size);
if (READ_ONCE(ei->i_disksize) != ext4_isize(inode->i_sb, raw_inode))
need_datasync = 1;
if (ei->i_disksize > 0x7fffffffULL) {
if (!ext4_has_feature_large_file(sb) ||
EXT4_SB(sb)->s_es->s_rev_level == cpu_to_le32(EXT4_GOOD_OLD_REV))
set_large_file = 1;
}
err = ext4_fill_raw_inode(inode, raw_inode);
spin_unlock(&ei->i_raw_lock);
if (err) {
EXT4_ERROR_INODE(inode, "corrupted inode contents");
goto out_brelse;
}
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-28 05:05:09 +08:00
if (inode->i_sb->s_flags & SB_LAZYTIME)
ext4_update_other_inodes_time(inode->i_sb, inode->i_ino,
bh->b_data);
BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata");
err = ext4_handle_dirty_metadata(handle, NULL, bh);
if (err)
goto out_error;
ext4_clear_inode_state(inode, EXT4_STATE_NEW);
if (set_large_file) {
BUFFER_TRACE(EXT4_SB(sb)->s_sbh, "get write access");
err = ext4_journal_get_write_access(handle, sb,
EXT4_SB(sb)->s_sbh,
EXT4_JTR_NONE);
if (err)
goto out_error;
lock_buffer(EXT4_SB(sb)->s_sbh);
ext4_set_feature_large_file(sb);
ext4_superblock_csum_set(sb);
unlock_buffer(EXT4_SB(sb)->s_sbh);
ext4_handle_sync(handle);
err = ext4_handle_dirty_metadata(handle, NULL,
EXT4_SB(sb)->s_sbh);
}
ext4_update_inode_fsync_trans(handle, inode, need_datasync);
out_error:
ext4_std_error(inode->i_sb, err);
out_brelse:
brelse(bh);
return err;
}
/*
* ext4_write_inode()
*
* We are called from a few places:
*
* - Within generic_file_aio_write() -> generic_write_sync() for O_SYNC files.
* Here, there will be no transaction running. We wait for any running
* transaction to commit.
*
* - Within flush work (sys_sync(), kupdate and such).
* We wait on commit, if told to.
*
* - Within iput_final() -> write_inode_now()
* We wait on commit, if told to.
*
* In all cases it is actually safe for us to return without doing anything,
* because the inode has been copied into a raw inode buffer in
* ext4_mark_inode_dirty(). This is a correctness thing for WB_SYNC_ALL
* writeback.
*
* Note that we are absolutely dependent upon all inode dirtiers doing the
* right thing: they *must* call mark_inode_dirty() after dirtying info in
* which we are interested.
*
* It would be a bug for them to not do this. The code:
*
* mark_inode_dirty(inode)
* stuff();
* inode->i_size = expr;
*
* is in error because write_inode() could occur while `stuff()' is running,
* and the new i_size will be lost. Plus the inode will no longer be on the
* superblock's dirty inode list.
*/
int ext4_write_inode(struct inode *inode, struct writeback_control *wbc)
{
int err;
if (WARN_ON_ONCE(current->flags & PF_MEMALLOC) ||
sb_rdonly(inode->i_sb))
return 0;
if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb))))
return -EIO;
if (EXT4_SB(inode->i_sb)->s_journal) {
if (ext4_journal_current_handle()) {
jbd_debug(1, "called recursively, non-PF_MEMALLOC!\n");
dump_stack();
return -EIO;
}
/*
* No need to force transaction in WB_SYNC_NONE mode. Also
* ext4_sync_fs() will force the commit after everything is
* written.
*/
if (wbc->sync_mode != WB_SYNC_ALL || wbc->for_sync)
return 0;
err = ext4_fc_commit(EXT4_SB(inode->i_sb)->s_journal,
EXT4_I(inode)->i_sync_tid);
} else {
struct ext4_iloc iloc;
err = __ext4_get_inode_loc_noinmem(inode, &iloc);
if (err)
return err;
/*
* sync(2) will flush the whole buffer cache. No need to do
* it here separately for each inode.
*/
if (wbc->sync_mode == WB_SYNC_ALL && !wbc->for_sync)
sync_dirty_buffer(iloc.bh);
if (buffer_req(iloc.bh) && !buffer_uptodate(iloc.bh)) {
ext4_error_inode_block(inode, iloc.bh->b_blocknr, EIO,
"IO error syncing inode");
err = -EIO;
}
brelse(iloc.bh);
}
return err;
}
/*
* In data=journal mode ext4_journalled_invalidate_folio() may fail to invalidate
* buffers that are attached to a folio straddling i_size and are undergoing
* commit. In that case we have to wait for commit to finish and try again.
*/
static void ext4_wait_for_tail_page_commit(struct inode *inode)
{
unsigned offset;
journal_t *journal = EXT4_SB(inode->i_sb)->s_journal;
tid_t commit_tid = 0;
int ret;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
offset = inode->i_size & (PAGE_SIZE - 1);
/*
* If the folio is fully truncated, we don't need to wait for any commit
* (and we even should not as __ext4_journalled_invalidate_folio() may
* strip all buffers from the folio but keep the folio dirty which can then
* confuse e.g. concurrent ext4_writepage() seeing dirty folio without
ext4: fix a bug in ext4_wait_for_tail_page_commit No need to wait for any commit once the page is fully truncated. Besides, it may confuse e.g. concurrent ext4_writepage() with the page still be dirty (will be cleared by truncate_pagecache() in ext4_setattr()) but buffers has been freed; and then trigger a bug show as below: [ 26.057508] ------------[ cut here ]------------ [ 26.058531] kernel BUG at fs/ext4/inode.c:2134! ... [ 26.088130] Call trace: [ 26.088695] ext4_writepage+0x914/0xb28 [ 26.089541] writeout.isra.4+0x1b4/0x2b8 [ 26.090409] move_to_new_page+0x3b0/0x568 [ 26.091338] __unmap_and_move+0x648/0x988 [ 26.092241] unmap_and_move+0x48c/0xbb8 [ 26.093096] migrate_pages+0x220/0xb28 [ 26.093945] kernel_mbind+0x828/0xa18 [ 26.094791] __arm64_sys_mbind+0xc8/0x138 [ 26.095716] el0_svc_common+0x190/0x490 [ 26.096571] el0_svc_handler+0x60/0xd0 [ 26.097423] el0_svc+0x8/0xc Run the procedure (generate by syzkaller) parallel with ext3. void main() { int fd, fd1, ret; void *addr; size_t length = 4096; int flags; off_t offset = 0; char *str = "12345"; fd = open("a", O_RDWR | O_CREAT); assert(fd >= 0); /* Truncate to 4k */ ret = ftruncate(fd, length); assert(ret == 0); /* Journal data mode */ flags = 0xc00f; ret = ioctl(fd, _IOW('f', 2, long), &flags); assert(ret == 0); /* Truncate to 0 */ fd1 = open("a", O_TRUNC | O_NOATIME); assert(fd1 >= 0); addr = mmap(NULL, length, PROT_WRITE | PROT_READ, MAP_SHARED, fd, offset); assert(addr != (void *)-1); memcpy(addr, str, 5); mbind(addr, length, 0, 0, 0, MPOL_MF_MOVE); } And the bug will be triggered once we seen the below order. reproduce1 reproduce2 ... | ... truncate to 4k | change to journal data mode | | memcpy(set page dirty) truncate to 0: | ext4_setattr: | ... | ext4_wait_for_tail_page_commit | | mbind(trigger bug) truncate_pagecache(clean dirty)| ... ... | mbind will call ext4_writepage() since the page still be dirty, and then report the bug since the buffers has been free. Fix it by return directly once offset equals to 0 which means the page has been fully truncated. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: yangerkun <yangerkun@huawei.com> Link: https://lore.kernel.org/r/20190919063508.1045-1-yangerkun@huawei.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-09-19 14:35:08 +08:00
* buffers). Also we don't need to wait for any commit if all buffers in
* the folio remain valid. This is most beneficial for the common case of
ext4: fix a bug in ext4_wait_for_tail_page_commit No need to wait for any commit once the page is fully truncated. Besides, it may confuse e.g. concurrent ext4_writepage() with the page still be dirty (will be cleared by truncate_pagecache() in ext4_setattr()) but buffers has been freed; and then trigger a bug show as below: [ 26.057508] ------------[ cut here ]------------ [ 26.058531] kernel BUG at fs/ext4/inode.c:2134! ... [ 26.088130] Call trace: [ 26.088695] ext4_writepage+0x914/0xb28 [ 26.089541] writeout.isra.4+0x1b4/0x2b8 [ 26.090409] move_to_new_page+0x3b0/0x568 [ 26.091338] __unmap_and_move+0x648/0x988 [ 26.092241] unmap_and_move+0x48c/0xbb8 [ 26.093096] migrate_pages+0x220/0xb28 [ 26.093945] kernel_mbind+0x828/0xa18 [ 26.094791] __arm64_sys_mbind+0xc8/0x138 [ 26.095716] el0_svc_common+0x190/0x490 [ 26.096571] el0_svc_handler+0x60/0xd0 [ 26.097423] el0_svc+0x8/0xc Run the procedure (generate by syzkaller) parallel with ext3. void main() { int fd, fd1, ret; void *addr; size_t length = 4096; int flags; off_t offset = 0; char *str = "12345"; fd = open("a", O_RDWR | O_CREAT); assert(fd >= 0); /* Truncate to 4k */ ret = ftruncate(fd, length); assert(ret == 0); /* Journal data mode */ flags = 0xc00f; ret = ioctl(fd, _IOW('f', 2, long), &flags); assert(ret == 0); /* Truncate to 0 */ fd1 = open("a", O_TRUNC | O_NOATIME); assert(fd1 >= 0); addr = mmap(NULL, length, PROT_WRITE | PROT_READ, MAP_SHARED, fd, offset); assert(addr != (void *)-1); memcpy(addr, str, 5); mbind(addr, length, 0, 0, 0, MPOL_MF_MOVE); } And the bug will be triggered once we seen the below order. reproduce1 reproduce2 ... | ... truncate to 4k | change to journal data mode | | memcpy(set page dirty) truncate to 0: | ext4_setattr: | ... | ext4_wait_for_tail_page_commit | | mbind(trigger bug) truncate_pagecache(clean dirty)| ... ... | mbind will call ext4_writepage() since the page still be dirty, and then report the bug since the buffers has been free. Fix it by return directly once offset equals to 0 which means the page has been fully truncated. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: yangerkun <yangerkun@huawei.com> Link: https://lore.kernel.org/r/20190919063508.1045-1-yangerkun@huawei.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-09-19 14:35:08 +08:00
* blocksize == PAGESIZE.
*/
ext4: fix a bug in ext4_wait_for_tail_page_commit No need to wait for any commit once the page is fully truncated. Besides, it may confuse e.g. concurrent ext4_writepage() with the page still be dirty (will be cleared by truncate_pagecache() in ext4_setattr()) but buffers has been freed; and then trigger a bug show as below: [ 26.057508] ------------[ cut here ]------------ [ 26.058531] kernel BUG at fs/ext4/inode.c:2134! ... [ 26.088130] Call trace: [ 26.088695] ext4_writepage+0x914/0xb28 [ 26.089541] writeout.isra.4+0x1b4/0x2b8 [ 26.090409] move_to_new_page+0x3b0/0x568 [ 26.091338] __unmap_and_move+0x648/0x988 [ 26.092241] unmap_and_move+0x48c/0xbb8 [ 26.093096] migrate_pages+0x220/0xb28 [ 26.093945] kernel_mbind+0x828/0xa18 [ 26.094791] __arm64_sys_mbind+0xc8/0x138 [ 26.095716] el0_svc_common+0x190/0x490 [ 26.096571] el0_svc_handler+0x60/0xd0 [ 26.097423] el0_svc+0x8/0xc Run the procedure (generate by syzkaller) parallel with ext3. void main() { int fd, fd1, ret; void *addr; size_t length = 4096; int flags; off_t offset = 0; char *str = "12345"; fd = open("a", O_RDWR | O_CREAT); assert(fd >= 0); /* Truncate to 4k */ ret = ftruncate(fd, length); assert(ret == 0); /* Journal data mode */ flags = 0xc00f; ret = ioctl(fd, _IOW('f', 2, long), &flags); assert(ret == 0); /* Truncate to 0 */ fd1 = open("a", O_TRUNC | O_NOATIME); assert(fd1 >= 0); addr = mmap(NULL, length, PROT_WRITE | PROT_READ, MAP_SHARED, fd, offset); assert(addr != (void *)-1); memcpy(addr, str, 5); mbind(addr, length, 0, 0, 0, MPOL_MF_MOVE); } And the bug will be triggered once we seen the below order. reproduce1 reproduce2 ... | ... truncate to 4k | change to journal data mode | | memcpy(set page dirty) truncate to 0: | ext4_setattr: | ... | ext4_wait_for_tail_page_commit | | mbind(trigger bug) truncate_pagecache(clean dirty)| ... ... | mbind will call ext4_writepage() since the page still be dirty, and then report the bug since the buffers has been free. Fix it by return directly once offset equals to 0 which means the page has been fully truncated. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: yangerkun <yangerkun@huawei.com> Link: https://lore.kernel.org/r/20190919063508.1045-1-yangerkun@huawei.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-09-19 14:35:08 +08:00
if (!offset || offset > (PAGE_SIZE - i_blocksize(inode)))
return;
while (1) {
struct folio *folio = filemap_lock_folio(inode->i_mapping,
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
inode->i_size >> PAGE_SHIFT);
if (!folio)
return;
ret = __ext4_journalled_invalidate_folio(folio, offset,
folio_size(folio) - offset);
folio_unlock(folio);
folio_put(folio);
if (ret != -EBUSY)
return;
commit_tid = 0;
read_lock(&journal->j_state_lock);
if (journal->j_committing_transaction)
commit_tid = journal->j_committing_transaction->t_tid;
read_unlock(&journal->j_state_lock);
if (commit_tid)
jbd2_log_wait_commit(journal, commit_tid);
}
}
/*
* ext4_setattr()
*
* Called from notify_change.
*
* We want to trap VFS attempts to truncate the file as soon as
* possible. In particular, we want to make sure that when the VFS
* shrinks i_size, we put the inode on the orphan list and modify
* i_disksize immediately, so that during the subsequent flushing of
* dirty pages and freeing of disk blocks, we can guarantee that any
* commit will leave the blocks being flushed in an unused state on
* disk. (On recovery, the inode will get truncated and the blocks will
* be freed, so we have a strong guarantee that no future commit will
* leave these blocks visible to the user.)
*
* Another thing we have to assure is that if we are in ordered mode
* and inode is still attached to the committing transaction, we must
* we start writeout of all the dirty pages which are being truncated.
* This way we are sure that all the data written in the previous
* transaction are already on disk (truncate waits for pages under
* writeback).
*
* Called with inode->i_rwsem down.
*/
int ext4_setattr(struct user_namespace *mnt_userns, struct dentry *dentry,
struct iattr *attr)
{
struct inode *inode = d_inode(dentry);
int error, rc = 0;
int orphan = 0;
const unsigned int ia_valid = attr->ia_valid;
if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb))))
return -EIO;
if (unlikely(IS_IMMUTABLE(inode)))
return -EPERM;
if (unlikely(IS_APPEND(inode) &&
(ia_valid & (ATTR_MODE | ATTR_UID |
ATTR_GID | ATTR_TIMES_SET))))
return -EPERM;
ext4: support idmapped mounts Enable idmapped mounts for ext4. All dedicated helpers we need for this exist. So this basically just means we're passing down the user_namespace argument from the VFS methods to the relevant helpers. Let's create simple example where we idmap an ext4 filesystem: root@f2-vm:~# truncate -s 5G ext4.img root@f2-vm:~# mkfs.ext4 ./ext4.img mke2fs 1.45.5 (07-Jan-2020) Discarding device blocks: done Creating filesystem with 1310720 4k blocks and 327680 inodes Filesystem UUID: 3fd91794-c6ca-4b0f-9964-289a000919cf Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736 Allocating group tables: done Writing inode tables: done Creating journal (16384 blocks): done Writing superblocks and filesystem accounting information: done root@f2-vm:~# losetup -f --show ./ext4.img /dev/loop0 root@f2-vm:~# mount /dev/loop0 /mnt root@f2-vm:~# ls -al /mnt/ total 24 drwxr-xr-x 3 root root 4096 Oct 28 13:34 . drwxr-xr-x 30 root root 4096 Oct 28 13:22 .. drwx------ 2 root root 16384 Oct 28 13:34 lost+found # Let's create an idmapped mount at /idmapped1 where we map uid and gid # 0 to uid and gid 1000 root@f2-vm:/# ./mount-idmapped --map-mount b:0:1000:1 /mnt/ /idmapped1/ root@f2-vm:/# ls -al /idmapped1/ total 24 drwxr-xr-x 3 ubuntu ubuntu 4096 Oct 28 13:34 . drwxr-xr-x 30 root root 4096 Oct 28 13:22 .. drwx------ 2 ubuntu ubuntu 16384 Oct 28 13:34 lost+found # Let's create an idmapped mount at /idmapped2 where we map uid and gid # 0 to uid and gid 2000 root@f2-vm:/# ./mount-idmapped --map-mount b:0:2000:1 /mnt/ /idmapped2/ root@f2-vm:/# ls -al /idmapped2/ total 24 drwxr-xr-x 3 2000 2000 4096 Oct 28 13:34 . drwxr-xr-x 31 root root 4096 Oct 28 13:39 .. drwx------ 2 2000 2000 16384 Oct 28 13:34 lost+found Let's create another example where we idmap the rootfs filesystem without a mapping for uid 0 and gid 0: # Create an idmapped mount of for a full POSIX range of rootfs under # /mnt but without a mapping for uid 0 to reduce attack surface root@f2-vm:/# ./mount-idmapped --map-mount b:1:1:65536 / /mnt/ # Since we don't have a mapping for uid and gid 0 all files owned by # uid and gid 0 should show up as uid and gid 65534: root@f2-vm:/# ls -al /mnt/ total 664 drwxr-xr-x 31 nobody nogroup 4096 Oct 28 13:39 . drwxr-xr-x 31 root root 4096 Oct 28 13:39 .. lrwxrwxrwx 1 nobody nogroup 7 Aug 25 07:44 bin -> usr/bin drwxr-xr-x 4 nobody nogroup 4096 Oct 28 13:17 boot drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:48 dev drwxr-xr-x 81 nobody nogroup 4096 Oct 28 04:00 etc drwxr-xr-x 4 nobody nogroup 4096 Oct 28 04:00 home lrwxrwxrwx 1 nobody nogroup 7 Aug 25 07:44 lib -> usr/lib lrwxrwxrwx 1 nobody nogroup 9 Aug 25 07:44 lib32 -> usr/lib32 lrwxrwxrwx 1 nobody nogroup 9 Aug 25 07:44 lib64 -> usr/lib64 lrwxrwxrwx 1 nobody nogroup 10 Aug 25 07:44 libx32 -> usr/libx32 drwx------ 2 nobody nogroup 16384 Aug 25 07:47 lost+found drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 media drwxr-xr-x 31 nobody nogroup 4096 Oct 28 13:39 mnt drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 opt drwxr-xr-x 2 nobody nogroup 4096 Apr 15 2020 proc drwx--x--x 6 nobody nogroup 4096 Oct 28 13:34 root drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:46 run lrwxrwxrwx 1 nobody nogroup 8 Aug 25 07:44 sbin -> usr/sbin drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 srv drwxr-xr-x 2 nobody nogroup 4096 Apr 15 2020 sys drwxrwxrwt 10 nobody nogroup 4096 Oct 28 13:19 tmp drwxr-xr-x 14 nobody nogroup 4096 Oct 20 13:00 usr drwxr-xr-x 12 nobody nogroup 4096 Aug 25 07:45 var # Since we do have a mapping for uid and gid 1000 all files owned by # uid and gid 1000 should simply show up as uid and gid 1000: root@f2-vm:/# ls -al /mnt/home/ubuntu/ total 40 drwxr-xr-x 3 ubuntu ubuntu 4096 Oct 28 00:43 . drwxr-xr-x 4 nobody nogroup 4096 Oct 28 04:00 .. -rw------- 1 ubuntu ubuntu 2936 Oct 28 12:26 .bash_history -rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout -rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc -rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile -rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful -rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo Link: https://lore.kernel.org/r/20210121131959.646623-39-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-ext4@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 21:19:57 +08:00
error = setattr_prepare(mnt_userns, dentry, attr);
if (error)
return error;
error = fscrypt_prepare_setattr(dentry, attr);
if (error)
return error;
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-23 00:26:24 +08:00
error = fsverity_prepare_setattr(dentry, attr);
if (error)
return error;
if (is_quota_modification(inode, attr)) {
error = dquot_initialize(inode);
if (error)
return error;
}
if ((ia_valid & ATTR_UID && !uid_eq(attr->ia_uid, inode->i_uid)) ||
(ia_valid & ATTR_GID && !gid_eq(attr->ia_gid, inode->i_gid))) {
handle_t *handle;
/* (user+group)*(old+new) structure, inode write (sb,
* inode block, ? - but truncate inode update has it) */
handle = ext4_journal_start(inode, EXT4_HT_QUOTA,
(EXT4_MAXQUOTAS_INIT_BLOCKS(inode->i_sb) +
EXT4_MAXQUOTAS_DEL_BLOCKS(inode->i_sb)) + 3);
if (IS_ERR(handle)) {
error = PTR_ERR(handle);
goto err_out;
}
/* dquot_transfer() calls back ext4_get_inode_usage() which
* counts xattr inode references.
*/
down_read(&EXT4_I(inode)->xattr_sem);
error = dquot_transfer(inode, attr);
up_read(&EXT4_I(inode)->xattr_sem);
if (error) {
ext4_journal_stop(handle);
return error;
}
/* Update corresponding info in inode so that everything is in
* one transaction */
if (attr->ia_valid & ATTR_UID)
inode->i_uid = attr->ia_uid;
if (attr->ia_valid & ATTR_GID)
inode->i_gid = attr->ia_gid;
error = ext4_mark_inode_dirty(handle, inode);
ext4_journal_stop(handle);
if (unlikely(error)) {
return error;
}
}
if (attr->ia_valid & ATTR_SIZE) {
handle_t *handle;
loff_t oldsize = inode->i_size;
ext4: fix warning in ext4_handle_inode_extension We got issue as follows: EXT4-fs error (device loop0) in ext4_reserve_inode_write:5741: Out of memory EXT4-fs error (device loop0): ext4_setattr:5462: inode #13: comm syz-executor.0: mark_inode_dirty error EXT4-fs error (device loop0) in ext4_setattr:5519: Out of memory EXT4-fs error (device loop0): ext4_ind_map_blocks:595: inode #13: comm syz-executor.0: Can't allocate blocks for non-extent mapped inodes with bigalloc ------------[ cut here ]------------ WARNING: CPU: 1 PID: 4361 at fs/ext4/file.c:301 ext4_file_write_iter+0x11c9/0x1220 Modules linked in: CPU: 1 PID: 4361 Comm: syz-executor.0 Not tainted 5.10.0+ #1 RIP: 0010:ext4_file_write_iter+0x11c9/0x1220 RSP: 0018:ffff924d80b27c00 EFLAGS: 00010282 RAX: ffffffff815a3379 RBX: 0000000000000000 RCX: 000000003b000000 RDX: ffff924d81601000 RSI: 00000000000009cc RDI: 00000000000009cd RBP: 000000000000000d R08: ffffffffbc5a2c6b R09: 0000902e0e52a96f R10: ffff902e2b7c1b40 R11: ffff902e2b7c1b40 R12: 000000000000000a R13: 0000000000000001 R14: ffff902e0e52aa10 R15: ffffffffffffff8b FS: 00007f81a7f65700(0000) GS:ffff902e3bc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffff600400 CR3: 000000012db88001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: do_iter_readv_writev+0x2e5/0x360 do_iter_write+0x112/0x4c0 do_pwritev+0x1e5/0x390 __x64_sys_pwritev2+0x7e/0xa0 do_syscall_64+0x37/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Above issue may happen as follows: Assume inode.i_size=4096 EXT4_I(inode)->i_disksize=4096 step 1: set inode->i_isize = 8192 ext4_setattr if (attr->ia_size != inode->i_size) EXT4_I(inode)->i_disksize = attr->ia_size; rc = ext4_mark_inode_dirty ext4_reserve_inode_write ext4_get_inode_loc __ext4_get_inode_loc sb_getblk --> return -ENOMEM ... if (!error) ->will not update i_size i_size_write(inode, attr->ia_size); Now: inode.i_size=4096 EXT4_I(inode)->i_disksize=8192 step 2: Direct write 4096 bytes ext4_file_write_iter ext4_dio_write_iter iomap_dio_rw ->return error if (extend) ext4_handle_inode_extension WARN_ON_ONCE(i_size_read(inode) < EXT4_I(inode)->i_disksize); ->Then trigger warning. To solve above issue, if mark inode dirty failed in ext4_setattr just set 'EXT4_I(inode)->i_disksize' with old value. Signed-off-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20220326065351.761952-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2022-03-26 14:53:51 +08:00
loff_t old_disksize;
int shrink = (attr->ia_size < inode->i_size);
if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) {
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
if (attr->ia_size > sbi->s_bitmap_maxbytes) {
return -EFBIG;
}
}
if (!S_ISREG(inode->i_mode)) {
return -EINVAL;
}
if (IS_I_VERSION(inode) && attr->ia_size != inode->i_size)
inode_inc_iversion(inode);
if (shrink) {
if (ext4_should_order_data(inode)) {
error = ext4_begin_ordered_truncate(inode,
attr->ia_size);
if (error)
goto err_out;
}
/*
* Blocks are going to be removed from the inode. Wait
* for dio in flight.
*/
inode_dio_wait(inode);
}
filemap_invalidate_lock(inode->i_mapping);
rc = ext4_break_layouts(inode);
if (rc) {
filemap_invalidate_unlock(inode->i_mapping);
goto err_out;
}
if (attr->ia_size != inode->i_size) {
handle = ext4_journal_start(inode, EXT4_HT_INODE, 3);
if (IS_ERR(handle)) {
error = PTR_ERR(handle);
goto out_mmap_sem;
}
if (ext4_handle_valid(handle) && shrink) {
error = ext4_orphan_add(handle, inode);
orphan = 1;
}
/*
* Update c/mtime on truncate up, ext4_truncate() will
* update c/mtime in shrink case below
*/
if (!shrink) {
inode->i_mtime = current_time(inode);
inode->i_ctime = inode->i_mtime;
}
if (shrink)
ext4_fc_track_range(handle, inode,
(attr->ia_size > 0 ? attr->ia_size - 1 : 0) >>
inode->i_sb->s_blocksize_bits,
EXT_MAX_BLOCKS - 1);
else
ext4_fc_track_range(
handle, inode,
(oldsize > 0 ? oldsize - 1 : oldsize) >>
inode->i_sb->s_blocksize_bits,
(attr->ia_size > 0 ? attr->ia_size - 1 : 0) >>
inode->i_sb->s_blocksize_bits);
down_write(&EXT4_I(inode)->i_data_sem);
ext4: fix warning in ext4_handle_inode_extension We got issue as follows: EXT4-fs error (device loop0) in ext4_reserve_inode_write:5741: Out of memory EXT4-fs error (device loop0): ext4_setattr:5462: inode #13: comm syz-executor.0: mark_inode_dirty error EXT4-fs error (device loop0) in ext4_setattr:5519: Out of memory EXT4-fs error (device loop0): ext4_ind_map_blocks:595: inode #13: comm syz-executor.0: Can't allocate blocks for non-extent mapped inodes with bigalloc ------------[ cut here ]------------ WARNING: CPU: 1 PID: 4361 at fs/ext4/file.c:301 ext4_file_write_iter+0x11c9/0x1220 Modules linked in: CPU: 1 PID: 4361 Comm: syz-executor.0 Not tainted 5.10.0+ #1 RIP: 0010:ext4_file_write_iter+0x11c9/0x1220 RSP: 0018:ffff924d80b27c00 EFLAGS: 00010282 RAX: ffffffff815a3379 RBX: 0000000000000000 RCX: 000000003b000000 RDX: ffff924d81601000 RSI: 00000000000009cc RDI: 00000000000009cd RBP: 000000000000000d R08: ffffffffbc5a2c6b R09: 0000902e0e52a96f R10: ffff902e2b7c1b40 R11: ffff902e2b7c1b40 R12: 000000000000000a R13: 0000000000000001 R14: ffff902e0e52aa10 R15: ffffffffffffff8b FS: 00007f81a7f65700(0000) GS:ffff902e3bc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffff600400 CR3: 000000012db88001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: do_iter_readv_writev+0x2e5/0x360 do_iter_write+0x112/0x4c0 do_pwritev+0x1e5/0x390 __x64_sys_pwritev2+0x7e/0xa0 do_syscall_64+0x37/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Above issue may happen as follows: Assume inode.i_size=4096 EXT4_I(inode)->i_disksize=4096 step 1: set inode->i_isize = 8192 ext4_setattr if (attr->ia_size != inode->i_size) EXT4_I(inode)->i_disksize = attr->ia_size; rc = ext4_mark_inode_dirty ext4_reserve_inode_write ext4_get_inode_loc __ext4_get_inode_loc sb_getblk --> return -ENOMEM ... if (!error) ->will not update i_size i_size_write(inode, attr->ia_size); Now: inode.i_size=4096 EXT4_I(inode)->i_disksize=8192 step 2: Direct write 4096 bytes ext4_file_write_iter ext4_dio_write_iter iomap_dio_rw ->return error if (extend) ext4_handle_inode_extension WARN_ON_ONCE(i_size_read(inode) < EXT4_I(inode)->i_disksize); ->Then trigger warning. To solve above issue, if mark inode dirty failed in ext4_setattr just set 'EXT4_I(inode)->i_disksize' with old value. Signed-off-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20220326065351.761952-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2022-03-26 14:53:51 +08:00
old_disksize = EXT4_I(inode)->i_disksize;
EXT4_I(inode)->i_disksize = attr->ia_size;
rc = ext4_mark_inode_dirty(handle, inode);
if (!error)
error = rc;
/*
* We have to update i_size under i_data_sem together
* with i_disksize to avoid races with writeback code
* running ext4_wb_update_i_disksize().
*/
if (!error)
i_size_write(inode, attr->ia_size);
ext4: fix warning in ext4_handle_inode_extension We got issue as follows: EXT4-fs error (device loop0) in ext4_reserve_inode_write:5741: Out of memory EXT4-fs error (device loop0): ext4_setattr:5462: inode #13: comm syz-executor.0: mark_inode_dirty error EXT4-fs error (device loop0) in ext4_setattr:5519: Out of memory EXT4-fs error (device loop0): ext4_ind_map_blocks:595: inode #13: comm syz-executor.0: Can't allocate blocks for non-extent mapped inodes with bigalloc ------------[ cut here ]------------ WARNING: CPU: 1 PID: 4361 at fs/ext4/file.c:301 ext4_file_write_iter+0x11c9/0x1220 Modules linked in: CPU: 1 PID: 4361 Comm: syz-executor.0 Not tainted 5.10.0+ #1 RIP: 0010:ext4_file_write_iter+0x11c9/0x1220 RSP: 0018:ffff924d80b27c00 EFLAGS: 00010282 RAX: ffffffff815a3379 RBX: 0000000000000000 RCX: 000000003b000000 RDX: ffff924d81601000 RSI: 00000000000009cc RDI: 00000000000009cd RBP: 000000000000000d R08: ffffffffbc5a2c6b R09: 0000902e0e52a96f R10: ffff902e2b7c1b40 R11: ffff902e2b7c1b40 R12: 000000000000000a R13: 0000000000000001 R14: ffff902e0e52aa10 R15: ffffffffffffff8b FS: 00007f81a7f65700(0000) GS:ffff902e3bc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffff600400 CR3: 000000012db88001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: do_iter_readv_writev+0x2e5/0x360 do_iter_write+0x112/0x4c0 do_pwritev+0x1e5/0x390 __x64_sys_pwritev2+0x7e/0xa0 do_syscall_64+0x37/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Above issue may happen as follows: Assume inode.i_size=4096 EXT4_I(inode)->i_disksize=4096 step 1: set inode->i_isize = 8192 ext4_setattr if (attr->ia_size != inode->i_size) EXT4_I(inode)->i_disksize = attr->ia_size; rc = ext4_mark_inode_dirty ext4_reserve_inode_write ext4_get_inode_loc __ext4_get_inode_loc sb_getblk --> return -ENOMEM ... if (!error) ->will not update i_size i_size_write(inode, attr->ia_size); Now: inode.i_size=4096 EXT4_I(inode)->i_disksize=8192 step 2: Direct write 4096 bytes ext4_file_write_iter ext4_dio_write_iter iomap_dio_rw ->return error if (extend) ext4_handle_inode_extension WARN_ON_ONCE(i_size_read(inode) < EXT4_I(inode)->i_disksize); ->Then trigger warning. To solve above issue, if mark inode dirty failed in ext4_setattr just set 'EXT4_I(inode)->i_disksize' with old value. Signed-off-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20220326065351.761952-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2022-03-26 14:53:51 +08:00
else
EXT4_I(inode)->i_disksize = old_disksize;
up_write(&EXT4_I(inode)->i_data_sem);
ext4_journal_stop(handle);
if (error)
goto out_mmap_sem;
if (!shrink) {
pagecache_isize_extended(inode, oldsize,
inode->i_size);
} else if (ext4_should_journal_data(inode)) {
ext4_wait_for_tail_page_commit(inode);
}
}
/*
* Truncate pagecache after we've waited for commit
* in data=journal mode to make pages freeable.
*/
truncate_pagecache(inode, inode->i_size);
/*
* Call ext4_truncate() even if i_size didn't change to
* truncate possible preallocated blocks.
*/
if (attr->ia_size <= oldsize) {
rc = ext4_truncate(inode);
if (rc)
error = rc;
}
out_mmap_sem:
filemap_invalidate_unlock(inode->i_mapping);
}
if (!error) {
ext4: support idmapped mounts Enable idmapped mounts for ext4. All dedicated helpers we need for this exist. So this basically just means we're passing down the user_namespace argument from the VFS methods to the relevant helpers. Let's create simple example where we idmap an ext4 filesystem: root@f2-vm:~# truncate -s 5G ext4.img root@f2-vm:~# mkfs.ext4 ./ext4.img mke2fs 1.45.5 (07-Jan-2020) Discarding device blocks: done Creating filesystem with 1310720 4k blocks and 327680 inodes Filesystem UUID: 3fd91794-c6ca-4b0f-9964-289a000919cf Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736 Allocating group tables: done Writing inode tables: done Creating journal (16384 blocks): done Writing superblocks and filesystem accounting information: done root@f2-vm:~# losetup -f --show ./ext4.img /dev/loop0 root@f2-vm:~# mount /dev/loop0 /mnt root@f2-vm:~# ls -al /mnt/ total 24 drwxr-xr-x 3 root root 4096 Oct 28 13:34 . drwxr-xr-x 30 root root 4096 Oct 28 13:22 .. drwx------ 2 root root 16384 Oct 28 13:34 lost+found # Let's create an idmapped mount at /idmapped1 where we map uid and gid # 0 to uid and gid 1000 root@f2-vm:/# ./mount-idmapped --map-mount b:0:1000:1 /mnt/ /idmapped1/ root@f2-vm:/# ls -al /idmapped1/ total 24 drwxr-xr-x 3 ubuntu ubuntu 4096 Oct 28 13:34 . drwxr-xr-x 30 root root 4096 Oct 28 13:22 .. drwx------ 2 ubuntu ubuntu 16384 Oct 28 13:34 lost+found # Let's create an idmapped mount at /idmapped2 where we map uid and gid # 0 to uid and gid 2000 root@f2-vm:/# ./mount-idmapped --map-mount b:0:2000:1 /mnt/ /idmapped2/ root@f2-vm:/# ls -al /idmapped2/ total 24 drwxr-xr-x 3 2000 2000 4096 Oct 28 13:34 . drwxr-xr-x 31 root root 4096 Oct 28 13:39 .. drwx------ 2 2000 2000 16384 Oct 28 13:34 lost+found Let's create another example where we idmap the rootfs filesystem without a mapping for uid 0 and gid 0: # Create an idmapped mount of for a full POSIX range of rootfs under # /mnt but without a mapping for uid 0 to reduce attack surface root@f2-vm:/# ./mount-idmapped --map-mount b:1:1:65536 / /mnt/ # Since we don't have a mapping for uid and gid 0 all files owned by # uid and gid 0 should show up as uid and gid 65534: root@f2-vm:/# ls -al /mnt/ total 664 drwxr-xr-x 31 nobody nogroup 4096 Oct 28 13:39 . drwxr-xr-x 31 root root 4096 Oct 28 13:39 .. lrwxrwxrwx 1 nobody nogroup 7 Aug 25 07:44 bin -> usr/bin drwxr-xr-x 4 nobody nogroup 4096 Oct 28 13:17 boot drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:48 dev drwxr-xr-x 81 nobody nogroup 4096 Oct 28 04:00 etc drwxr-xr-x 4 nobody nogroup 4096 Oct 28 04:00 home lrwxrwxrwx 1 nobody nogroup 7 Aug 25 07:44 lib -> usr/lib lrwxrwxrwx 1 nobody nogroup 9 Aug 25 07:44 lib32 -> usr/lib32 lrwxrwxrwx 1 nobody nogroup 9 Aug 25 07:44 lib64 -> usr/lib64 lrwxrwxrwx 1 nobody nogroup 10 Aug 25 07:44 libx32 -> usr/libx32 drwx------ 2 nobody nogroup 16384 Aug 25 07:47 lost+found drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 media drwxr-xr-x 31 nobody nogroup 4096 Oct 28 13:39 mnt drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 opt drwxr-xr-x 2 nobody nogroup 4096 Apr 15 2020 proc drwx--x--x 6 nobody nogroup 4096 Oct 28 13:34 root drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:46 run lrwxrwxrwx 1 nobody nogroup 8 Aug 25 07:44 sbin -> usr/sbin drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 srv drwxr-xr-x 2 nobody nogroup 4096 Apr 15 2020 sys drwxrwxrwt 10 nobody nogroup 4096 Oct 28 13:19 tmp drwxr-xr-x 14 nobody nogroup 4096 Oct 20 13:00 usr drwxr-xr-x 12 nobody nogroup 4096 Aug 25 07:45 var # Since we do have a mapping for uid and gid 1000 all files owned by # uid and gid 1000 should simply show up as uid and gid 1000: root@f2-vm:/# ls -al /mnt/home/ubuntu/ total 40 drwxr-xr-x 3 ubuntu ubuntu 4096 Oct 28 00:43 . drwxr-xr-x 4 nobody nogroup 4096 Oct 28 04:00 .. -rw------- 1 ubuntu ubuntu 2936 Oct 28 12:26 .bash_history -rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout -rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc -rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile -rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful -rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo Link: https://lore.kernel.org/r/20210121131959.646623-39-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-ext4@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 21:19:57 +08:00
setattr_copy(mnt_userns, inode, attr);
mark_inode_dirty(inode);
}
/*
* If the call to ext4_truncate failed to get a transaction handle at
* all, we need to clean up the in-core orphan list manually.
*/
if (orphan && inode->i_nlink)
ext4_orphan_del(NULL, inode);
if (!error && (ia_valid & ATTR_MODE))
ext4: support idmapped mounts Enable idmapped mounts for ext4. All dedicated helpers we need for this exist. So this basically just means we're passing down the user_namespace argument from the VFS methods to the relevant helpers. Let's create simple example where we idmap an ext4 filesystem: root@f2-vm:~# truncate -s 5G ext4.img root@f2-vm:~# mkfs.ext4 ./ext4.img mke2fs 1.45.5 (07-Jan-2020) Discarding device blocks: done Creating filesystem with 1310720 4k blocks and 327680 inodes Filesystem UUID: 3fd91794-c6ca-4b0f-9964-289a000919cf Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736 Allocating group tables: done Writing inode tables: done Creating journal (16384 blocks): done Writing superblocks and filesystem accounting information: done root@f2-vm:~# losetup -f --show ./ext4.img /dev/loop0 root@f2-vm:~# mount /dev/loop0 /mnt root@f2-vm:~# ls -al /mnt/ total 24 drwxr-xr-x 3 root root 4096 Oct 28 13:34 . drwxr-xr-x 30 root root 4096 Oct 28 13:22 .. drwx------ 2 root root 16384 Oct 28 13:34 lost+found # Let's create an idmapped mount at /idmapped1 where we map uid and gid # 0 to uid and gid 1000 root@f2-vm:/# ./mount-idmapped --map-mount b:0:1000:1 /mnt/ /idmapped1/ root@f2-vm:/# ls -al /idmapped1/ total 24 drwxr-xr-x 3 ubuntu ubuntu 4096 Oct 28 13:34 . drwxr-xr-x 30 root root 4096 Oct 28 13:22 .. drwx------ 2 ubuntu ubuntu 16384 Oct 28 13:34 lost+found # Let's create an idmapped mount at /idmapped2 where we map uid and gid # 0 to uid and gid 2000 root@f2-vm:/# ./mount-idmapped --map-mount b:0:2000:1 /mnt/ /idmapped2/ root@f2-vm:/# ls -al /idmapped2/ total 24 drwxr-xr-x 3 2000 2000 4096 Oct 28 13:34 . drwxr-xr-x 31 root root 4096 Oct 28 13:39 .. drwx------ 2 2000 2000 16384 Oct 28 13:34 lost+found Let's create another example where we idmap the rootfs filesystem without a mapping for uid 0 and gid 0: # Create an idmapped mount of for a full POSIX range of rootfs under # /mnt but without a mapping for uid 0 to reduce attack surface root@f2-vm:/# ./mount-idmapped --map-mount b:1:1:65536 / /mnt/ # Since we don't have a mapping for uid and gid 0 all files owned by # uid and gid 0 should show up as uid and gid 65534: root@f2-vm:/# ls -al /mnt/ total 664 drwxr-xr-x 31 nobody nogroup 4096 Oct 28 13:39 . drwxr-xr-x 31 root root 4096 Oct 28 13:39 .. lrwxrwxrwx 1 nobody nogroup 7 Aug 25 07:44 bin -> usr/bin drwxr-xr-x 4 nobody nogroup 4096 Oct 28 13:17 boot drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:48 dev drwxr-xr-x 81 nobody nogroup 4096 Oct 28 04:00 etc drwxr-xr-x 4 nobody nogroup 4096 Oct 28 04:00 home lrwxrwxrwx 1 nobody nogroup 7 Aug 25 07:44 lib -> usr/lib lrwxrwxrwx 1 nobody nogroup 9 Aug 25 07:44 lib32 -> usr/lib32 lrwxrwxrwx 1 nobody nogroup 9 Aug 25 07:44 lib64 -> usr/lib64 lrwxrwxrwx 1 nobody nogroup 10 Aug 25 07:44 libx32 -> usr/libx32 drwx------ 2 nobody nogroup 16384 Aug 25 07:47 lost+found drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 media drwxr-xr-x 31 nobody nogroup 4096 Oct 28 13:39 mnt drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 opt drwxr-xr-x 2 nobody nogroup 4096 Apr 15 2020 proc drwx--x--x 6 nobody nogroup 4096 Oct 28 13:34 root drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:46 run lrwxrwxrwx 1 nobody nogroup 8 Aug 25 07:44 sbin -> usr/sbin drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 srv drwxr-xr-x 2 nobody nogroup 4096 Apr 15 2020 sys drwxrwxrwt 10 nobody nogroup 4096 Oct 28 13:19 tmp drwxr-xr-x 14 nobody nogroup 4096 Oct 20 13:00 usr drwxr-xr-x 12 nobody nogroup 4096 Aug 25 07:45 var # Since we do have a mapping for uid and gid 1000 all files owned by # uid and gid 1000 should simply show up as uid and gid 1000: root@f2-vm:/# ls -al /mnt/home/ubuntu/ total 40 drwxr-xr-x 3 ubuntu ubuntu 4096 Oct 28 00:43 . drwxr-xr-x 4 nobody nogroup 4096 Oct 28 04:00 .. -rw------- 1 ubuntu ubuntu 2936 Oct 28 12:26 .bash_history -rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout -rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc -rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile -rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful -rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo Link: https://lore.kernel.org/r/20210121131959.646623-39-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-ext4@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 21:19:57 +08:00
rc = posix_acl_chmod(mnt_userns, inode, inode->i_mode);
err_out:
if (error)
ext4_std_error(inode->i_sb, error);
if (!error)
error = rc;
return error;
}
int ext4_getattr(struct user_namespace *mnt_userns, const struct path *path,
struct kstat *stat, u32 request_mask, unsigned int query_flags)
{
struct inode *inode = d_inode(path->dentry);
struct ext4_inode *raw_inode;
struct ext4_inode_info *ei = EXT4_I(inode);
unsigned int flags;
if ((request_mask & STATX_BTIME) &&
EXT4_FITS_IN_INODE(raw_inode, ei, i_crtime)) {
stat->result_mask |= STATX_BTIME;
stat->btime.tv_sec = ei->i_crtime.tv_sec;
stat->btime.tv_nsec = ei->i_crtime.tv_nsec;
}
flags = ei->i_flags & EXT4_FL_USER_VISIBLE;
if (flags & EXT4_APPEND_FL)
stat->attributes |= STATX_ATTR_APPEND;
if (flags & EXT4_COMPR_FL)
stat->attributes |= STATX_ATTR_COMPRESSED;
if (flags & EXT4_ENCRYPT_FL)
stat->attributes |= STATX_ATTR_ENCRYPTED;
if (flags & EXT4_IMMUTABLE_FL)
stat->attributes |= STATX_ATTR_IMMUTABLE;
if (flags & EXT4_NODUMP_FL)
stat->attributes |= STATX_ATTR_NODUMP;
if (flags & EXT4_VERITY_FL)
stat->attributes |= STATX_ATTR_VERITY;
stat->attributes_mask |= (STATX_ATTR_APPEND |
STATX_ATTR_COMPRESSED |
STATX_ATTR_ENCRYPTED |
STATX_ATTR_IMMUTABLE |
STATX_ATTR_NODUMP |
STATX_ATTR_VERITY);
ext4: support idmapped mounts Enable idmapped mounts for ext4. All dedicated helpers we need for this exist. So this basically just means we're passing down the user_namespace argument from the VFS methods to the relevant helpers. Let's create simple example where we idmap an ext4 filesystem: root@f2-vm:~# truncate -s 5G ext4.img root@f2-vm:~# mkfs.ext4 ./ext4.img mke2fs 1.45.5 (07-Jan-2020) Discarding device blocks: done Creating filesystem with 1310720 4k blocks and 327680 inodes Filesystem UUID: 3fd91794-c6ca-4b0f-9964-289a000919cf Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736 Allocating group tables: done Writing inode tables: done Creating journal (16384 blocks): done Writing superblocks and filesystem accounting information: done root@f2-vm:~# losetup -f --show ./ext4.img /dev/loop0 root@f2-vm:~# mount /dev/loop0 /mnt root@f2-vm:~# ls -al /mnt/ total 24 drwxr-xr-x 3 root root 4096 Oct 28 13:34 . drwxr-xr-x 30 root root 4096 Oct 28 13:22 .. drwx------ 2 root root 16384 Oct 28 13:34 lost+found # Let's create an idmapped mount at /idmapped1 where we map uid and gid # 0 to uid and gid 1000 root@f2-vm:/# ./mount-idmapped --map-mount b:0:1000:1 /mnt/ /idmapped1/ root@f2-vm:/# ls -al /idmapped1/ total 24 drwxr-xr-x 3 ubuntu ubuntu 4096 Oct 28 13:34 . drwxr-xr-x 30 root root 4096 Oct 28 13:22 .. drwx------ 2 ubuntu ubuntu 16384 Oct 28 13:34 lost+found # Let's create an idmapped mount at /idmapped2 where we map uid and gid # 0 to uid and gid 2000 root@f2-vm:/# ./mount-idmapped --map-mount b:0:2000:1 /mnt/ /idmapped2/ root@f2-vm:/# ls -al /idmapped2/ total 24 drwxr-xr-x 3 2000 2000 4096 Oct 28 13:34 . drwxr-xr-x 31 root root 4096 Oct 28 13:39 .. drwx------ 2 2000 2000 16384 Oct 28 13:34 lost+found Let's create another example where we idmap the rootfs filesystem without a mapping for uid 0 and gid 0: # Create an idmapped mount of for a full POSIX range of rootfs under # /mnt but without a mapping for uid 0 to reduce attack surface root@f2-vm:/# ./mount-idmapped --map-mount b:1:1:65536 / /mnt/ # Since we don't have a mapping for uid and gid 0 all files owned by # uid and gid 0 should show up as uid and gid 65534: root@f2-vm:/# ls -al /mnt/ total 664 drwxr-xr-x 31 nobody nogroup 4096 Oct 28 13:39 . drwxr-xr-x 31 root root 4096 Oct 28 13:39 .. lrwxrwxrwx 1 nobody nogroup 7 Aug 25 07:44 bin -> usr/bin drwxr-xr-x 4 nobody nogroup 4096 Oct 28 13:17 boot drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:48 dev drwxr-xr-x 81 nobody nogroup 4096 Oct 28 04:00 etc drwxr-xr-x 4 nobody nogroup 4096 Oct 28 04:00 home lrwxrwxrwx 1 nobody nogroup 7 Aug 25 07:44 lib -> usr/lib lrwxrwxrwx 1 nobody nogroup 9 Aug 25 07:44 lib32 -> usr/lib32 lrwxrwxrwx 1 nobody nogroup 9 Aug 25 07:44 lib64 -> usr/lib64 lrwxrwxrwx 1 nobody nogroup 10 Aug 25 07:44 libx32 -> usr/libx32 drwx------ 2 nobody nogroup 16384 Aug 25 07:47 lost+found drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 media drwxr-xr-x 31 nobody nogroup 4096 Oct 28 13:39 mnt drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 opt drwxr-xr-x 2 nobody nogroup 4096 Apr 15 2020 proc drwx--x--x 6 nobody nogroup 4096 Oct 28 13:34 root drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:46 run lrwxrwxrwx 1 nobody nogroup 8 Aug 25 07:44 sbin -> usr/sbin drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 srv drwxr-xr-x 2 nobody nogroup 4096 Apr 15 2020 sys drwxrwxrwt 10 nobody nogroup 4096 Oct 28 13:19 tmp drwxr-xr-x 14 nobody nogroup 4096 Oct 20 13:00 usr drwxr-xr-x 12 nobody nogroup 4096 Aug 25 07:45 var # Since we do have a mapping for uid and gid 1000 all files owned by # uid and gid 1000 should simply show up as uid and gid 1000: root@f2-vm:/# ls -al /mnt/home/ubuntu/ total 40 drwxr-xr-x 3 ubuntu ubuntu 4096 Oct 28 00:43 . drwxr-xr-x 4 nobody nogroup 4096 Oct 28 04:00 .. -rw------- 1 ubuntu ubuntu 2936 Oct 28 12:26 .bash_history -rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout -rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc -rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile -rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful -rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo Link: https://lore.kernel.org/r/20210121131959.646623-39-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-ext4@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 21:19:57 +08:00
generic_fillattr(mnt_userns, inode, stat);
return 0;
}
int ext4_file_getattr(struct user_namespace *mnt_userns,
const struct path *path, struct kstat *stat,
u32 request_mask, unsigned int query_flags)
{
struct inode *inode = d_inode(path->dentry);
u64 delalloc_blocks;
ext4: support idmapped mounts Enable idmapped mounts for ext4. All dedicated helpers we need for this exist. So this basically just means we're passing down the user_namespace argument from the VFS methods to the relevant helpers. Let's create simple example where we idmap an ext4 filesystem: root@f2-vm:~# truncate -s 5G ext4.img root@f2-vm:~# mkfs.ext4 ./ext4.img mke2fs 1.45.5 (07-Jan-2020) Discarding device blocks: done Creating filesystem with 1310720 4k blocks and 327680 inodes Filesystem UUID: 3fd91794-c6ca-4b0f-9964-289a000919cf Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736 Allocating group tables: done Writing inode tables: done Creating journal (16384 blocks): done Writing superblocks and filesystem accounting information: done root@f2-vm:~# losetup -f --show ./ext4.img /dev/loop0 root@f2-vm:~# mount /dev/loop0 /mnt root@f2-vm:~# ls -al /mnt/ total 24 drwxr-xr-x 3 root root 4096 Oct 28 13:34 . drwxr-xr-x 30 root root 4096 Oct 28 13:22 .. drwx------ 2 root root 16384 Oct 28 13:34 lost+found # Let's create an idmapped mount at /idmapped1 where we map uid and gid # 0 to uid and gid 1000 root@f2-vm:/# ./mount-idmapped --map-mount b:0:1000:1 /mnt/ /idmapped1/ root@f2-vm:/# ls -al /idmapped1/ total 24 drwxr-xr-x 3 ubuntu ubuntu 4096 Oct 28 13:34 . drwxr-xr-x 30 root root 4096 Oct 28 13:22 .. drwx------ 2 ubuntu ubuntu 16384 Oct 28 13:34 lost+found # Let's create an idmapped mount at /idmapped2 where we map uid and gid # 0 to uid and gid 2000 root@f2-vm:/# ./mount-idmapped --map-mount b:0:2000:1 /mnt/ /idmapped2/ root@f2-vm:/# ls -al /idmapped2/ total 24 drwxr-xr-x 3 2000 2000 4096 Oct 28 13:34 . drwxr-xr-x 31 root root 4096 Oct 28 13:39 .. drwx------ 2 2000 2000 16384 Oct 28 13:34 lost+found Let's create another example where we idmap the rootfs filesystem without a mapping for uid 0 and gid 0: # Create an idmapped mount of for a full POSIX range of rootfs under # /mnt but without a mapping for uid 0 to reduce attack surface root@f2-vm:/# ./mount-idmapped --map-mount b:1:1:65536 / /mnt/ # Since we don't have a mapping for uid and gid 0 all files owned by # uid and gid 0 should show up as uid and gid 65534: root@f2-vm:/# ls -al /mnt/ total 664 drwxr-xr-x 31 nobody nogroup 4096 Oct 28 13:39 . drwxr-xr-x 31 root root 4096 Oct 28 13:39 .. lrwxrwxrwx 1 nobody nogroup 7 Aug 25 07:44 bin -> usr/bin drwxr-xr-x 4 nobody nogroup 4096 Oct 28 13:17 boot drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:48 dev drwxr-xr-x 81 nobody nogroup 4096 Oct 28 04:00 etc drwxr-xr-x 4 nobody nogroup 4096 Oct 28 04:00 home lrwxrwxrwx 1 nobody nogroup 7 Aug 25 07:44 lib -> usr/lib lrwxrwxrwx 1 nobody nogroup 9 Aug 25 07:44 lib32 -> usr/lib32 lrwxrwxrwx 1 nobody nogroup 9 Aug 25 07:44 lib64 -> usr/lib64 lrwxrwxrwx 1 nobody nogroup 10 Aug 25 07:44 libx32 -> usr/libx32 drwx------ 2 nobody nogroup 16384 Aug 25 07:47 lost+found drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 media drwxr-xr-x 31 nobody nogroup 4096 Oct 28 13:39 mnt drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 opt drwxr-xr-x 2 nobody nogroup 4096 Apr 15 2020 proc drwx--x--x 6 nobody nogroup 4096 Oct 28 13:34 root drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:46 run lrwxrwxrwx 1 nobody nogroup 8 Aug 25 07:44 sbin -> usr/sbin drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 srv drwxr-xr-x 2 nobody nogroup 4096 Apr 15 2020 sys drwxrwxrwt 10 nobody nogroup 4096 Oct 28 13:19 tmp drwxr-xr-x 14 nobody nogroup 4096 Oct 20 13:00 usr drwxr-xr-x 12 nobody nogroup 4096 Aug 25 07:45 var # Since we do have a mapping for uid and gid 1000 all files owned by # uid and gid 1000 should simply show up as uid and gid 1000: root@f2-vm:/# ls -al /mnt/home/ubuntu/ total 40 drwxr-xr-x 3 ubuntu ubuntu 4096 Oct 28 00:43 . drwxr-xr-x 4 nobody nogroup 4096 Oct 28 04:00 .. -rw------- 1 ubuntu ubuntu 2936 Oct 28 12:26 .bash_history -rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout -rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc -rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile -rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful -rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo Link: https://lore.kernel.org/r/20210121131959.646623-39-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-ext4@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 21:19:57 +08:00
ext4_getattr(mnt_userns, path, stat, request_mask, query_flags);
/*
* If there is inline data in the inode, the inode will normally not
* have data blocks allocated (it may have an external xattr block).
* Report at least one sector for such files, so tools like tar, rsync,
* others don't incorrectly think the file is completely sparse.
*/
if (unlikely(ext4_has_inline_data(inode)))
stat->blocks += (stat->size + 511) >> 9;
/*
* We can't update i_blocks if the block allocation is delayed
* otherwise in the case of system crash before the real block
* allocation is done, we will have i_blocks inconsistent with
* on-disk file blocks.
* We always keep i_blocks updated together with real
* allocation. But to not confuse with user, stat
* will return the blocks that include the delayed allocation
* blocks for this file.
*/
delalloc_blocks = EXT4_C2B(EXT4_SB(inode->i_sb),
EXT4_I(inode)->i_reserved_data_blocks);
stat->blocks += delalloc_blocks << (inode->i_sb->s_blocksize_bits - 9);
return 0;
}
static int ext4_index_trans_blocks(struct inode *inode, int lblocks,
int pextents)
{
if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
return ext4_ind_trans_blocks(inode, lblocks);
return ext4_ext_index_trans_blocks(inode, pextents);
}
/*
* Account for index blocks, block groups bitmaps and block group
* descriptor blocks if modify datablocks and index blocks
* worse case, the indexs blocks spread over different block groups
*
* If datablocks are discontiguous, they are possible to spread over
* different block groups too. If they are contiguous, with flexbg,
* they could still across block group boundary.
*
* Also account for superblock, inode, quota and xattr blocks
*/
static int ext4_meta_trans_blocks(struct inode *inode, int lblocks,
int pextents)
{
ext4_group_t groups, ngroups = ext4_get_groups_count(inode->i_sb);
int gdpblocks;
int idxblocks;
int ret = 0;
/*
* How many index blocks need to touch to map @lblocks logical blocks
* to @pextents physical extents?
*/
idxblocks = ext4_index_trans_blocks(inode, lblocks, pextents);
ret = idxblocks;
/*
* Now let's see how many group bitmaps and group descriptors need
* to account
*/
groups = idxblocks + pextents;
gdpblocks = groups;
if (groups > ngroups)
groups = ngroups;
if (groups > EXT4_SB(inode->i_sb)->s_gdb_count)
gdpblocks = EXT4_SB(inode->i_sb)->s_gdb_count;
/* bitmaps and block group descriptor blocks */
ret += groups + gdpblocks;
/* Blocks for super block, inode, quota and xattr blocks */
ret += EXT4_META_TRANS_BLOCKS(inode->i_sb);
return ret;
}
/*
* Calculate the total number of credits to reserve to fit
* the modification of a single pages into a single transaction,
* which may include multiple chunks of block allocations.
*
* This could be called via ext4_write_begin()
*
* We need to consider the worse case, when
* one new block per extent.
*/
int ext4_writepage_trans_blocks(struct inode *inode)
{
int bpp = ext4_journal_blocks_per_page(inode);
int ret;
ret = ext4_meta_trans_blocks(inode, bpp, bpp);
/* Account for data blocks for journalled mode */
if (ext4_should_journal_data(inode))
ret += bpp;
return ret;
}
/*
* Calculate the journal credits for a chunk of data modification.
*
* This is called from DIO, fallocate or whoever calling
* ext4_map_blocks() to map/allocate a chunk of contiguous disk blocks.
*
* journal buffers for data blocks are not included here, as DIO
* and fallocate do no need to journal data buffers.
*/
int ext4_chunk_trans_blocks(struct inode *inode, int nrblocks)
{
return ext4_meta_trans_blocks(inode, nrblocks, 1);
}
/*
* The caller must have previously called ext4_reserve_inode_write().
* Give this, we know that the caller already has write access to iloc->bh.
*/
int ext4_mark_iloc_dirty(handle_t *handle,
struct inode *inode, struct ext4_iloc *iloc)
{
int err = 0;
if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb)))) {
put_bh(iloc->bh);
return -EIO;
}
ext4_fc_track_inode(handle, inode);
if (IS_I_VERSION(inode))
inode_inc_iversion(inode);
/* the do_update_inode consumes one bh->b_count */
get_bh(iloc->bh);
/* ext4_do_update_inode() does jbd2_journal_dirty_metadata */
err = ext4_do_update_inode(handle, inode, iloc);
put_bh(iloc->bh);
return err;
}
/*
* On success, We end up with an outstanding reference count against
* iloc->bh. This _must_ be cleaned up later.
*/
int
ext4_reserve_inode_write(handle_t *handle, struct inode *inode,
struct ext4_iloc *iloc)
{
int err;
if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb))))
return -EIO;
err = ext4_get_inode_loc(inode, iloc);
if (!err) {
BUFFER_TRACE(iloc->bh, "get_write_access");
err = ext4_journal_get_write_access(handle, inode->i_sb,
iloc->bh, EXT4_JTR_NONE);
if (err) {
brelse(iloc->bh);
iloc->bh = NULL;
}
}
ext4_std_error(inode->i_sb, err);
return err;
}
static int __ext4_expand_extra_isize(struct inode *inode,
unsigned int new_extra_isize,
struct ext4_iloc *iloc,
handle_t *handle, int *no_expand)
{
struct ext4_inode *raw_inode;
struct ext4_xattr_ibody_header *header;
unsigned int inode_size = EXT4_INODE_SIZE(inode->i_sb);
struct ext4_inode_info *ei = EXT4_I(inode);
int error;
/* this was checked at iget time, but double check for good measure */
if ((EXT4_GOOD_OLD_INODE_SIZE + ei->i_extra_isize > inode_size) ||
(ei->i_extra_isize & 3)) {
EXT4_ERROR_INODE(inode, "bad extra_isize %u (inode size %u)",
ei->i_extra_isize,
EXT4_INODE_SIZE(inode->i_sb));
return -EFSCORRUPTED;
}
if ((new_extra_isize < ei->i_extra_isize) ||
(new_extra_isize < 4) ||
(new_extra_isize > inode_size - EXT4_GOOD_OLD_INODE_SIZE))
return -EINVAL; /* Should never happen */
raw_inode = ext4_raw_inode(iloc);
header = IHDR(inode, raw_inode);
/* No extended attributes present */
if (!ext4_test_inode_state(inode, EXT4_STATE_XATTR) ||
header->h_magic != cpu_to_le32(EXT4_XATTR_MAGIC)) {
memset((void *)raw_inode + EXT4_GOOD_OLD_INODE_SIZE +
EXT4_I(inode)->i_extra_isize, 0,
new_extra_isize - EXT4_I(inode)->i_extra_isize);
EXT4_I(inode)->i_extra_isize = new_extra_isize;
return 0;
}
/* try to expand with EAs present */
error = ext4_expand_extra_isize_ea(inode, new_extra_isize,
raw_inode, handle);
if (error) {
/*
* Inode size expansion failed; don't try again
*/
*no_expand = 1;
}
return error;
}
ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields We need to make sure that existing ext3 filesystems can also avail the new fields that have been added to the ext4 inode. We use s_want_extra_isize and s_min_extra_isize to decide by how much we should expand the inode. If EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature is set then we expand the inode by max(s_want_extra_isize, s_min_extra_isize , sizeof(ext4_inode) - EXT4_GOOD_OLD_INODE_SIZE) bytes. Actually it is still an open question about whether users should be able to set s_*_extra_isize smaller than the known fields or not. This patch also adds the functionality to expand inodes to include the newly added fields. We start by trying to expand by s_want_extra_isize bytes and if its fails we try to expand by s_min_extra_isize bytes. This is done by changing the i_extra_isize if enough space is available in the inode and no EAs are present. If EAs are present and there is enough space in the inode then the EAs in the inode are shifted to make space. If enough space is not available in the inode due to the EAs then 1 or more EAs are shifted to the external EA block. In the worst case when even the external EA block does not have enough space we inform the user that some EA would need to be deleted or s_min_extra_isize would have to be reduced. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 21:19:57 +08:00
/*
* Expand an inode by new_extra_isize bytes.
* Returns 0 on success or negative error number on failure.
*/
static int ext4_try_to_expand_extra_isize(struct inode *inode,
unsigned int new_extra_isize,
struct ext4_iloc iloc,
handle_t *handle)
ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields We need to make sure that existing ext3 filesystems can also avail the new fields that have been added to the ext4 inode. We use s_want_extra_isize and s_min_extra_isize to decide by how much we should expand the inode. If EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature is set then we expand the inode by max(s_want_extra_isize, s_min_extra_isize , sizeof(ext4_inode) - EXT4_GOOD_OLD_INODE_SIZE) bytes. Actually it is still an open question about whether users should be able to set s_*_extra_isize smaller than the known fields or not. This patch also adds the functionality to expand inodes to include the newly added fields. We start by trying to expand by s_want_extra_isize bytes and if its fails we try to expand by s_min_extra_isize bytes. This is done by changing the i_extra_isize if enough space is available in the inode and no EAs are present. If EAs are present and there is enough space in the inode then the EAs in the inode are shifted to make space. If enough space is not available in the inode due to the EAs then 1 or more EAs are shifted to the external EA block. In the worst case when even the external EA block does not have enough space we inform the user that some EA would need to be deleted or s_min_extra_isize would have to be reduced. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 21:19:57 +08:00
{
int no_expand;
int error;
ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields We need to make sure that existing ext3 filesystems can also avail the new fields that have been added to the ext4 inode. We use s_want_extra_isize and s_min_extra_isize to decide by how much we should expand the inode. If EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature is set then we expand the inode by max(s_want_extra_isize, s_min_extra_isize , sizeof(ext4_inode) - EXT4_GOOD_OLD_INODE_SIZE) bytes. Actually it is still an open question about whether users should be able to set s_*_extra_isize smaller than the known fields or not. This patch also adds the functionality to expand inodes to include the newly added fields. We start by trying to expand by s_want_extra_isize bytes and if its fails we try to expand by s_min_extra_isize bytes. This is done by changing the i_extra_isize if enough space is available in the inode and no EAs are present. If EAs are present and there is enough space in the inode then the EAs in the inode are shifted to make space. If enough space is not available in the inode due to the EAs then 1 or more EAs are shifted to the external EA block. In the worst case when even the external EA block does not have enough space we inform the user that some EA would need to be deleted or s_min_extra_isize would have to be reduced. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 21:19:57 +08:00
if (ext4_test_inode_state(inode, EXT4_STATE_NO_EXPAND))
return -EOVERFLOW;
/*
* In nojournal mode, we can immediately attempt to expand
* the inode. When journaled, we first need to obtain extra
* buffer credits since we may write into the EA block
* with this same handle. If journal_extend fails, then it will
* only result in a minor loss of functionality for that inode.
* If this is felt to be critical, then e2fsck should be run to
* force a large enough s_min_extra_isize.
*/
if (ext4_journal_extend(handle,
EXT4_DATA_TRANS_BLOCKS(inode->i_sb), 0) != 0)
return -ENOSPC;
ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields We need to make sure that existing ext3 filesystems can also avail the new fields that have been added to the ext4 inode. We use s_want_extra_isize and s_min_extra_isize to decide by how much we should expand the inode. If EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature is set then we expand the inode by max(s_want_extra_isize, s_min_extra_isize , sizeof(ext4_inode) - EXT4_GOOD_OLD_INODE_SIZE) bytes. Actually it is still an open question about whether users should be able to set s_*_extra_isize smaller than the known fields or not. This patch also adds the functionality to expand inodes to include the newly added fields. We start by trying to expand by s_want_extra_isize bytes and if its fails we try to expand by s_min_extra_isize bytes. This is done by changing the i_extra_isize if enough space is available in the inode and no EAs are present. If EAs are present and there is enough space in the inode then the EAs in the inode are shifted to make space. If enough space is not available in the inode due to the EAs then 1 or more EAs are shifted to the external EA block. In the worst case when even the external EA block does not have enough space we inform the user that some EA would need to be deleted or s_min_extra_isize would have to be reduced. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 21:19:57 +08:00
if (ext4_write_trylock_xattr(inode, &no_expand) == 0)
return -EBUSY;
error = __ext4_expand_extra_isize(inode, new_extra_isize, &iloc,
handle, &no_expand);
ext4_write_unlock_xattr(inode, &no_expand);
ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields We need to make sure that existing ext3 filesystems can also avail the new fields that have been added to the ext4 inode. We use s_want_extra_isize and s_min_extra_isize to decide by how much we should expand the inode. If EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature is set then we expand the inode by max(s_want_extra_isize, s_min_extra_isize , sizeof(ext4_inode) - EXT4_GOOD_OLD_INODE_SIZE) bytes. Actually it is still an open question about whether users should be able to set s_*_extra_isize smaller than the known fields or not. This patch also adds the functionality to expand inodes to include the newly added fields. We start by trying to expand by s_want_extra_isize bytes and if its fails we try to expand by s_min_extra_isize bytes. This is done by changing the i_extra_isize if enough space is available in the inode and no EAs are present. If EAs are present and there is enough space in the inode then the EAs in the inode are shifted to make space. If enough space is not available in the inode due to the EAs then 1 or more EAs are shifted to the external EA block. In the worst case when even the external EA block does not have enough space we inform the user that some EA would need to be deleted or s_min_extra_isize would have to be reduced. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 21:19:57 +08:00
return error;
}
ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields We need to make sure that existing ext3 filesystems can also avail the new fields that have been added to the ext4 inode. We use s_want_extra_isize and s_min_extra_isize to decide by how much we should expand the inode. If EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature is set then we expand the inode by max(s_want_extra_isize, s_min_extra_isize , sizeof(ext4_inode) - EXT4_GOOD_OLD_INODE_SIZE) bytes. Actually it is still an open question about whether users should be able to set s_*_extra_isize smaller than the known fields or not. This patch also adds the functionality to expand inodes to include the newly added fields. We start by trying to expand by s_want_extra_isize bytes and if its fails we try to expand by s_min_extra_isize bytes. This is done by changing the i_extra_isize if enough space is available in the inode and no EAs are present. If EAs are present and there is enough space in the inode then the EAs in the inode are shifted to make space. If enough space is not available in the inode due to the EAs then 1 or more EAs are shifted to the external EA block. In the worst case when even the external EA block does not have enough space we inform the user that some EA would need to be deleted or s_min_extra_isize would have to be reduced. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 21:19:57 +08:00
int ext4_expand_extra_isize(struct inode *inode,
unsigned int new_extra_isize,
struct ext4_iloc *iloc)
{
handle_t *handle;
int no_expand;
int error, rc;
if (ext4_test_inode_state(inode, EXT4_STATE_NO_EXPAND)) {
brelse(iloc->bh);
return -EOVERFLOW;
ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields We need to make sure that existing ext3 filesystems can also avail the new fields that have been added to the ext4 inode. We use s_want_extra_isize and s_min_extra_isize to decide by how much we should expand the inode. If EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature is set then we expand the inode by max(s_want_extra_isize, s_min_extra_isize , sizeof(ext4_inode) - EXT4_GOOD_OLD_INODE_SIZE) bytes. Actually it is still an open question about whether users should be able to set s_*_extra_isize smaller than the known fields or not. This patch also adds the functionality to expand inodes to include the newly added fields. We start by trying to expand by s_want_extra_isize bytes and if its fails we try to expand by s_min_extra_isize bytes. This is done by changing the i_extra_isize if enough space is available in the inode and no EAs are present. If EAs are present and there is enough space in the inode then the EAs in the inode are shifted to make space. If enough space is not available in the inode due to the EAs then 1 or more EAs are shifted to the external EA block. In the worst case when even the external EA block does not have enough space we inform the user that some EA would need to be deleted or s_min_extra_isize would have to be reduced. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 21:19:57 +08:00
}
handle = ext4_journal_start(inode, EXT4_HT_INODE,
EXT4_DATA_TRANS_BLOCKS(inode->i_sb));
if (IS_ERR(handle)) {
error = PTR_ERR(handle);
brelse(iloc->bh);
return error;
}
ext4_write_lock_xattr(inode, &no_expand);
BUFFER_TRACE(iloc->bh, "get_write_access");
error = ext4_journal_get_write_access(handle, inode->i_sb, iloc->bh,
EXT4_JTR_NONE);
if (error) {
brelse(iloc->bh);
goto out_unlock;
}
error = __ext4_expand_extra_isize(inode, new_extra_isize, iloc,
handle, &no_expand);
rc = ext4_mark_iloc_dirty(handle, inode, iloc);
if (!error)
error = rc;
out_unlock:
ext4_write_unlock_xattr(inode, &no_expand);
ext4_journal_stop(handle);
return error;
ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields We need to make sure that existing ext3 filesystems can also avail the new fields that have been added to the ext4 inode. We use s_want_extra_isize and s_min_extra_isize to decide by how much we should expand the inode. If EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature is set then we expand the inode by max(s_want_extra_isize, s_min_extra_isize , sizeof(ext4_inode) - EXT4_GOOD_OLD_INODE_SIZE) bytes. Actually it is still an open question about whether users should be able to set s_*_extra_isize smaller than the known fields or not. This patch also adds the functionality to expand inodes to include the newly added fields. We start by trying to expand by s_want_extra_isize bytes and if its fails we try to expand by s_min_extra_isize bytes. This is done by changing the i_extra_isize if enough space is available in the inode and no EAs are present. If EAs are present and there is enough space in the inode then the EAs in the inode are shifted to make space. If enough space is not available in the inode due to the EAs then 1 or more EAs are shifted to the external EA block. In the worst case when even the external EA block does not have enough space we inform the user that some EA would need to be deleted or s_min_extra_isize would have to be reduced. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 21:19:57 +08:00
}
/*
* What we do here is to mark the in-core inode as clean with respect to inode
* dirtiness (it may still be data-dirty).
* This means that the in-core inode may be reaped by prune_icache
* without having to perform any I/O. This is a very good thing,
* because *any* task may call prune_icache - even ones which
* have a transaction open against a different journal.
*
* Is this cheating? Not really. Sure, we haven't written the
* inode out, but prune_icache isn't a user-visible syncing function.
* Whenever the user wants stuff synced (sys_sync, sys_msync, sys_fsync)
* we start and wait on commits.
*/
int __ext4_mark_inode_dirty(handle_t *handle, struct inode *inode,
const char *func, unsigned int line)
{
struct ext4_iloc iloc;
ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields We need to make sure that existing ext3 filesystems can also avail the new fields that have been added to the ext4 inode. We use s_want_extra_isize and s_min_extra_isize to decide by how much we should expand the inode. If EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature is set then we expand the inode by max(s_want_extra_isize, s_min_extra_isize , sizeof(ext4_inode) - EXT4_GOOD_OLD_INODE_SIZE) bytes. Actually it is still an open question about whether users should be able to set s_*_extra_isize smaller than the known fields or not. This patch also adds the functionality to expand inodes to include the newly added fields. We start by trying to expand by s_want_extra_isize bytes and if its fails we try to expand by s_min_extra_isize bytes. This is done by changing the i_extra_isize if enough space is available in the inode and no EAs are present. If EAs are present and there is enough space in the inode then the EAs in the inode are shifted to make space. If enough space is not available in the inode due to the EAs then 1 or more EAs are shifted to the external EA block. In the worst case when even the external EA block does not have enough space we inform the user that some EA would need to be deleted or s_min_extra_isize would have to be reduced. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 21:19:57 +08:00
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
int err;
might_sleep();
trace_ext4_mark_inode_dirty(inode, _RET_IP_);
err = ext4_reserve_inode_write(handle, inode, &iloc);
if (err)
goto out;
if (EXT4_I(inode)->i_extra_isize < sbi->s_want_extra_isize)
ext4_try_to_expand_extra_isize(inode, sbi->s_want_extra_isize,
iloc, handle);
err = ext4_mark_iloc_dirty(handle, inode, &iloc);
out:
if (unlikely(err))
ext4_error_inode_err(inode, func, line, 0, err,
"mark_inode_dirty error");
return err;
}
/*
* ext4_dirty_inode() is called from __mark_inode_dirty()
*
* We're really interested in the case where a file is being extended.
* i_size has been changed by generic_commit_write() and we thus need
* to include the updated inode in the current transaction.
*
* Also, dquot_alloc_block() will always dirty the inode when blocks
* are allocated to the file.
*
* If the inode is marked synchronous, we don't honour that here - doing
* so would cause a commit on atime updates, which we don't bother doing.
* We handle synchronous inodes at the highest possible level.
*/
void ext4_dirty_inode(struct inode *inode, int flags)
{
handle_t *handle;
handle = ext4_journal_start(inode, EXT4_HT_INODE, 2);
if (IS_ERR(handle))
return;
ext4_mark_inode_dirty(handle, inode);
ext4_journal_stop(handle);
}
int ext4_change_inode_journal_flag(struct inode *inode, int val)
{
journal_t *journal;
handle_t *handle;
int err;
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
/*
* We have to be very careful here: changing a data block's
* journaling status dynamically is dangerous. If we write a
* data block to the journal, change the status and then delete
* that block, we risk forgetting to revoke the old log record
* from the journal and so a subsequent replay can corrupt data.
* So, first we make sure that the journal is empty and that
* nobody is changing anything.
*/
journal = EXT4_JOURNAL(inode);
if (!journal)
return 0;
if (is_journal_aborted(journal))
return -EROFS;
/* Wait for all existing dio workers */
inode_dio_wait(inode);
ext4: handle unwritten or delalloc buffers before enabling data journaling We already allocate delalloc blocks before changing the inode mode into "per-file data journal" mode to prevent delalloc blocks from remaining not allocated, but another issue concerned with "BH_Unwritten" status still exists. For example, by fallocate(), several buffers' status change into "BH_Unwritten", but these buffers cannot be processed by ext4_alloc_da_blocks(). So, they still remain in unwritten status after per-file data journaling is enabled and they cannot be changed into written status any more and, if they are journaled and eventually checkpointed, these unwritten buffer will cause a kernel panic by the below BUG_ON() function of submit_bh_wbc() when they are submitted during checkpointing. static int submit_bh_wbc(int rw, struct buffer_head *bh,... { ... BUG_ON(buffer_unwritten(bh)); Moreover, when "dioread_nolock" option is enabled, the status of a buffer is changed into "BH_Unwritten" after write_begin() completes and the "BH_Unwritten" status will be cleared after I/O is done. Therefore, if a buffer's status is changed into unwrutten but the buffer's I/O is not submitted and completed, it can cause the same problem after enabling per-file data journaling. You can easily generate this bug by executing the following command. ./kvm-xfstests -C 10000 -m nodelalloc,dioread_nolock generic/269 To resolve these problems and define a boundary between the previous mode and per-file data journaling mode, we need to flush and wait all the I/O of buffers of a file before enabling per-file data journaling of the file. Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2016-04-26 11:21:00 +08:00
/*
* Before flushing the journal and switching inode's aops, we have
* to flush all dirty data the inode has. There can be outstanding
* delayed allocations, there can be unwritten extents created by
* fallocate or buffered writes in dioread_nolock mode covered by
* dirty data which can be converted only after flushing the dirty
* data (and journalled aops don't know how to handle these cases).
*/
if (val) {
filemap_invalidate_lock(inode->i_mapping);
ext4: handle unwritten or delalloc buffers before enabling data journaling We already allocate delalloc blocks before changing the inode mode into "per-file data journal" mode to prevent delalloc blocks from remaining not allocated, but another issue concerned with "BH_Unwritten" status still exists. For example, by fallocate(), several buffers' status change into "BH_Unwritten", but these buffers cannot be processed by ext4_alloc_da_blocks(). So, they still remain in unwritten status after per-file data journaling is enabled and they cannot be changed into written status any more and, if they are journaled and eventually checkpointed, these unwritten buffer will cause a kernel panic by the below BUG_ON() function of submit_bh_wbc() when they are submitted during checkpointing. static int submit_bh_wbc(int rw, struct buffer_head *bh,... { ... BUG_ON(buffer_unwritten(bh)); Moreover, when "dioread_nolock" option is enabled, the status of a buffer is changed into "BH_Unwritten" after write_begin() completes and the "BH_Unwritten" status will be cleared after I/O is done. Therefore, if a buffer's status is changed into unwrutten but the buffer's I/O is not submitted and completed, it can cause the same problem after enabling per-file data journaling. You can easily generate this bug by executing the following command. ./kvm-xfstests -C 10000 -m nodelalloc,dioread_nolock generic/269 To resolve these problems and define a boundary between the previous mode and per-file data journaling mode, we need to flush and wait all the I/O of buffers of a file before enabling per-file data journaling of the file. Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2016-04-26 11:21:00 +08:00
err = filemap_write_and_wait(inode->i_mapping);
if (err < 0) {
filemap_invalidate_unlock(inode->i_mapping);
ext4: handle unwritten or delalloc buffers before enabling data journaling We already allocate delalloc blocks before changing the inode mode into "per-file data journal" mode to prevent delalloc blocks from remaining not allocated, but another issue concerned with "BH_Unwritten" status still exists. For example, by fallocate(), several buffers' status change into "BH_Unwritten", but these buffers cannot be processed by ext4_alloc_da_blocks(). So, they still remain in unwritten status after per-file data journaling is enabled and they cannot be changed into written status any more and, if they are journaled and eventually checkpointed, these unwritten buffer will cause a kernel panic by the below BUG_ON() function of submit_bh_wbc() when they are submitted during checkpointing. static int submit_bh_wbc(int rw, struct buffer_head *bh,... { ... BUG_ON(buffer_unwritten(bh)); Moreover, when "dioread_nolock" option is enabled, the status of a buffer is changed into "BH_Unwritten" after write_begin() completes and the "BH_Unwritten" status will be cleared after I/O is done. Therefore, if a buffer's status is changed into unwrutten but the buffer's I/O is not submitted and completed, it can cause the same problem after enabling per-file data journaling. You can easily generate this bug by executing the following command. ./kvm-xfstests -C 10000 -m nodelalloc,dioread_nolock generic/269 To resolve these problems and define a boundary between the previous mode and per-file data journaling mode, we need to flush and wait all the I/O of buffers of a file before enabling per-file data journaling of the file. Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2016-04-26 11:21:00 +08:00
return err;
}
}
percpu_down_write(&sbi->s_writepages_rwsem);
jbd2_journal_lock_updates(journal);
/*
* OK, there are no updates running now, and all cached data is
* synced to disk. We are now in a completely consistent state
* which doesn't have anything in the journal, and we know that
* no filesystem updates are running, so it is safe to modify
* the inode's in-core data-journaling state flag now.
*/
if (val)
ext4_set_inode_flag(inode, EXT4_INODE_JOURNAL_DATA);
else {
err = jbd2_journal_flush(journal, 0);
if (err < 0) {
jbd2_journal_unlock_updates(journal);
percpu_up_write(&sbi->s_writepages_rwsem);
return err;
}
ext4_clear_inode_flag(inode, EXT4_INODE_JOURNAL_DATA);
}
ext4_set_aops(inode);
jbd2_journal_unlock_updates(journal);
percpu_up_write(&sbi->s_writepages_rwsem);
ext4: handle unwritten or delalloc buffers before enabling data journaling We already allocate delalloc blocks before changing the inode mode into "per-file data journal" mode to prevent delalloc blocks from remaining not allocated, but another issue concerned with "BH_Unwritten" status still exists. For example, by fallocate(), several buffers' status change into "BH_Unwritten", but these buffers cannot be processed by ext4_alloc_da_blocks(). So, they still remain in unwritten status after per-file data journaling is enabled and they cannot be changed into written status any more and, if they are journaled and eventually checkpointed, these unwritten buffer will cause a kernel panic by the below BUG_ON() function of submit_bh_wbc() when they are submitted during checkpointing. static int submit_bh_wbc(int rw, struct buffer_head *bh,... { ... BUG_ON(buffer_unwritten(bh)); Moreover, when "dioread_nolock" option is enabled, the status of a buffer is changed into "BH_Unwritten" after write_begin() completes and the "BH_Unwritten" status will be cleared after I/O is done. Therefore, if a buffer's status is changed into unwrutten but the buffer's I/O is not submitted and completed, it can cause the same problem after enabling per-file data journaling. You can easily generate this bug by executing the following command. ./kvm-xfstests -C 10000 -m nodelalloc,dioread_nolock generic/269 To resolve these problems and define a boundary between the previous mode and per-file data journaling mode, we need to flush and wait all the I/O of buffers of a file before enabling per-file data journaling of the file. Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2016-04-26 11:21:00 +08:00
if (val)
filemap_invalidate_unlock(inode->i_mapping);
/* Finally we can mark the inode as dirty. */
handle = ext4_journal_start(inode, EXT4_HT_INODE, 1);
if (IS_ERR(handle))
return PTR_ERR(handle);
ext4_fc_mark_ineligible(inode->i_sb,
EXT4_FC_REASON_JOURNAL_FLAG_CHANGE, handle);
err = ext4_mark_inode_dirty(handle, inode);
ext4_handle_sync(handle);
ext4_journal_stop(handle);
ext4_std_error(inode->i_sb, err);
return err;
}
static int ext4_bh_unmapped(handle_t *handle, struct inode *inode,
struct buffer_head *bh)
{
return !buffer_mapped(bh);
}
vm_fault_t ext4_page_mkwrite(struct vm_fault *vmf)
{
struct vm_area_struct *vma = vmf->vma;
struct page *page = vmf->page;
loff_t size;
unsigned long len;
int err;
vm_fault_t ret;
struct file *file = vma->vm_file;
struct inode *inode = file_inode(file);
struct address_space *mapping = inode->i_mapping;
handle_t *handle;
get_block_t *get_block;
int retries = 0;
if (unlikely(IS_IMMUTABLE(inode)))
return VM_FAULT_SIGBUS;
sb_start_pagefault(inode->i_sb);
file_update_time(vma->vm_file);
filemap_invalidate_lock_shared(mapping);
ext4: evict inline data when writing to memory map Currently the case of writing via mmap to a file with inline data is not handled. This is maybe a rare case since it requires a writable memory map of a very small file, but it is trivial to trigger with on inline_data filesystem, and it causes the 'BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA));' in ext4_writepages() to be hit: mkfs.ext4 -O inline_data /dev/vdb mount /dev/vdb /mnt xfs_io -f /mnt/file \ -c 'pwrite 0 1' \ -c 'mmap -w 0 1m' \ -c 'mwrite 0 1' \ -c 'fsync' kernel BUG at fs/ext4/inode.c:2723! invalid opcode: 0000 [#1] SMP CPU: 1 PID: 2532 Comm: xfs_io Not tainted 4.11.0-rc1-xfstests-00301-g071d9acf3d1f #633 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014 task: ffff88003d3a8040 task.stack: ffffc90000300000 RIP: 0010:ext4_writepages+0xc89/0xf8a RSP: 0018:ffffc90000303ca0 EFLAGS: 00010283 RAX: 0000028410000000 RBX: ffff8800383fa3b0 RCX: ffffffff812afcdc RDX: 00000a9d00000246 RSI: ffffffff81e660e0 RDI: 0000000000000246 RBP: ffffc90000303dc0 R08: 0000000000000002 R09: 869618e8f99b4fa5 R10: 00000000852287a2 R11: 00000000a03b49f4 R12: ffff88003808e698 R13: 0000000000000000 R14: 7fffffffffffffff R15: 7fffffffffffffff FS: 00007fd3e53094c0(0000) GS:ffff88003e400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd3e4c51000 CR3: 000000003d554000 CR4: 00000000003406e0 Call Trace: ? _raw_spin_unlock+0x27/0x2a ? kvm_clock_read+0x1e/0x20 do_writepages+0x23/0x2c ? do_writepages+0x23/0x2c __filemap_fdatawrite_range+0x80/0x87 filemap_write_and_wait_range+0x67/0x8c ext4_sync_file+0x20e/0x472 vfs_fsync_range+0x8e/0x9f ? syscall_trace_enter+0x25b/0x2d0 vfs_fsync+0x1c/0x1e do_fsync+0x31/0x4a SyS_fsync+0x10/0x14 do_syscall_64+0x69/0x131 entry_SYSCALL64_slow_path+0x25/0x25 We could try to be smart and keep the inline data in this case, or at least support delayed allocation when allocating the block, but these solutions would be more complicated and don't seem worthwhile given how rare this case seems to be. So just fix the bug by calling ext4_convert_inline_data() when we're asked to make a page writable, so that any inline data gets evicted, with the block allocated immediately. Reported-by: Nick Alcock <nick.alcock@oracle.com> Cc: stable@vger.kernel.org Reviewed-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-04-30 12:10:50 +08:00
err = ext4_convert_inline_data(inode);
if (err)
ext4: evict inline data when writing to memory map Currently the case of writing via mmap to a file with inline data is not handled. This is maybe a rare case since it requires a writable memory map of a very small file, but it is trivial to trigger with on inline_data filesystem, and it causes the 'BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA));' in ext4_writepages() to be hit: mkfs.ext4 -O inline_data /dev/vdb mount /dev/vdb /mnt xfs_io -f /mnt/file \ -c 'pwrite 0 1' \ -c 'mmap -w 0 1m' \ -c 'mwrite 0 1' \ -c 'fsync' kernel BUG at fs/ext4/inode.c:2723! invalid opcode: 0000 [#1] SMP CPU: 1 PID: 2532 Comm: xfs_io Not tainted 4.11.0-rc1-xfstests-00301-g071d9acf3d1f #633 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014 task: ffff88003d3a8040 task.stack: ffffc90000300000 RIP: 0010:ext4_writepages+0xc89/0xf8a RSP: 0018:ffffc90000303ca0 EFLAGS: 00010283 RAX: 0000028410000000 RBX: ffff8800383fa3b0 RCX: ffffffff812afcdc RDX: 00000a9d00000246 RSI: ffffffff81e660e0 RDI: 0000000000000246 RBP: ffffc90000303dc0 R08: 0000000000000002 R09: 869618e8f99b4fa5 R10: 00000000852287a2 R11: 00000000a03b49f4 R12: ffff88003808e698 R13: 0000000000000000 R14: 7fffffffffffffff R15: 7fffffffffffffff FS: 00007fd3e53094c0(0000) GS:ffff88003e400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd3e4c51000 CR3: 000000003d554000 CR4: 00000000003406e0 Call Trace: ? _raw_spin_unlock+0x27/0x2a ? kvm_clock_read+0x1e/0x20 do_writepages+0x23/0x2c ? do_writepages+0x23/0x2c __filemap_fdatawrite_range+0x80/0x87 filemap_write_and_wait_range+0x67/0x8c ext4_sync_file+0x20e/0x472 vfs_fsync_range+0x8e/0x9f ? syscall_trace_enter+0x25b/0x2d0 vfs_fsync+0x1c/0x1e do_fsync+0x31/0x4a SyS_fsync+0x10/0x14 do_syscall_64+0x69/0x131 entry_SYSCALL64_slow_path+0x25/0x25 We could try to be smart and keep the inline data in this case, or at least support delayed allocation when allocating the block, but these solutions would be more complicated and don't seem worthwhile given how rare this case seems to be. So just fix the bug by calling ext4_convert_inline_data() when we're asked to make a page writable, so that any inline data gets evicted, with the block allocated immediately. Reported-by: Nick Alcock <nick.alcock@oracle.com> Cc: stable@vger.kernel.org Reviewed-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-04-30 12:10:50 +08:00
goto out_ret;
ext4: data=journal: fixes for ext4_page_mkwrite() These are two fixes for data journalling required by the next patch, discovered while testing it. First, the optimization to return early if all buffers are mapped is not appropriate for the next patch: The inode _must_ be added to the transaction's list in data=journal mode (so to write-protect pages on commit) thus we cannot return early there. Second, once that optimization to reduce transactions was disabled for data=journal mode, more transactions happened, and occasionally hit this warning message: 'JBD2: Spotted dirty metadata buffer'. Reason is, block_page_mkwrite() will set_buffer_dirty() before do_journal_get_write_access() that is there to prevent it. This issue was masked by the optimization. So, on data=journal use __block_write_begin() instead. This also requires page locking and len recalculation. (see block_page_mkwrite() for implementation details.) Finally, as Jan noted there is little sharing between data=journal and other modes in ext4_page_mkwrite(). However, a prototype of ext4_journalled_page_mkwrite() showed there still would be lots of duplicated lines (tens of) that didn't seem worth it. Thus this patch ends up with an ugly goto to skip all non-data journalling code (to avoid long indentations, but that can be changed..) in the beginning, and just a conditional in the transaction section. Well, we skip a common part to data journalling which is the page truncated check, but we do it again after ext4_journal_start() when we re-acquire the page lock (so not to acquire the page lock twice needlessly for data journalling.) Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201006004841.600488-4-mfo@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-06 08:48:40 +08:00
/*
* On data journalling we skip straight to the transaction handle:
* there's no delalloc; page truncated will be checked later; the
* early return w/ all buffers mapped (calculates size/len) can't
* be used; and there's no dioread_nolock, so only ext4_get_block.
*/
if (ext4_should_journal_data(inode))
goto retry_alloc;
/* Delalloc case is easy... */
if (test_opt(inode->i_sb, DELALLOC) &&
!ext4_nonda_switch(inode->i_sb)) {
do {
err = block_page_mkwrite(vma, vmf,
ext4_da_get_block_prep);
} while (err == -ENOSPC &&
ext4_should_retry_alloc(inode->i_sb, &retries));
goto out_ret;
}
lock_page(page);
size = i_size_read(inode);
/* Page got truncated from under us? */
if (page->mapping != mapping || page_offset(page) > size) {
unlock_page(page);
ret = VM_FAULT_NOPAGE;
goto out;
}
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
if (page->index == size >> PAGE_SHIFT)
len = size & ~PAGE_MASK;
else
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
len = PAGE_SIZE;
/*
* Return if we have all the buffers mapped. This avoids the need to do
* journal_start/journal_stop which can block and take a long time
ext4: data=journal: fixes for ext4_page_mkwrite() These are two fixes for data journalling required by the next patch, discovered while testing it. First, the optimization to return early if all buffers are mapped is not appropriate for the next patch: The inode _must_ be added to the transaction's list in data=journal mode (so to write-protect pages on commit) thus we cannot return early there. Second, once that optimization to reduce transactions was disabled for data=journal mode, more transactions happened, and occasionally hit this warning message: 'JBD2: Spotted dirty metadata buffer'. Reason is, block_page_mkwrite() will set_buffer_dirty() before do_journal_get_write_access() that is there to prevent it. This issue was masked by the optimization. So, on data=journal use __block_write_begin() instead. This also requires page locking and len recalculation. (see block_page_mkwrite() for implementation details.) Finally, as Jan noted there is little sharing between data=journal and other modes in ext4_page_mkwrite(). However, a prototype of ext4_journalled_page_mkwrite() showed there still would be lots of duplicated lines (tens of) that didn't seem worth it. Thus this patch ends up with an ugly goto to skip all non-data journalling code (to avoid long indentations, but that can be changed..) in the beginning, and just a conditional in the transaction section. Well, we skip a common part to data journalling which is the page truncated check, but we do it again after ext4_journal_start() when we re-acquire the page lock (so not to acquire the page lock twice needlessly for data journalling.) Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201006004841.600488-4-mfo@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-06 08:48:40 +08:00
*
* This cannot be done for data journalling, as we have to add the
* inode to the transaction's list to writeprotect pages on commit.
*/
if (page_has_buffers(page)) {
if (!ext4_walk_page_buffers(NULL, inode, page_buffers(page),
0, len, NULL,
ext4_bh_unmapped)) {
/* Wait so that we don't change page under IO */
mm: only enforce stable page writes if the backing device requires it Create a helper function to check if a backing device requires stable page writes and, if so, performs the necessary wait. Then, make it so that all points in the memory manager that handle making pages writable use the helper function. This should provide stable page write support to most filesystems, while eliminating unnecessary waiting for devices that don't require the feature. Before this patchset, all filesystems would block, regardless of whether or not it was necessary. ext3 would wait, but still generate occasional checksum errors. The network filesystems were left to do their own thing, so they'd wait too. After this patchset, all the disk filesystems except ext3 and btrfs will wait only if the hardware requires it. ext3 (if necessary) snapshots pages instead of blocking, and btrfs provides its own bdi so the mm will never wait. Network filesystems haven't been touched, so either they provide their own stable page guarantees or they don't block at all. The blocking behavior is back to what it was before 3.0 if you don't have a disk requiring stable page writes. Here's the result of using dbench to test latency on ext2: 3.8.0-rc3: Operation Count AvgLat MaxLat ---------------------------------------- WriteX 109347 0.028 59.817 ReadX 347180 0.004 3.391 Flush 15514 29.828 287.283 Throughput 57.429 MB/sec 4 clients 4 procs max_latency=287.290 ms 3.8.0-rc3 + patches: WriteX 105556 0.029 4.273 ReadX 335004 0.005 4.112 Flush 14982 30.540 298.634 Throughput 55.4496 MB/sec 4 clients 4 procs max_latency=298.650 ms As you can see, the maximum write latency drops considerably with this patch enabled. The other filesystems (ext3/ext4/xfs/btrfs) behave similarly, but see the cover letter for those results. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 08:42:51 +08:00
wait_for_stable_page(page);
ret = VM_FAULT_LOCKED;
goto out;
}
}
unlock_page(page);
/* OK, we need to fill the hole... */
if (ext4_should_dioread_nolock(inode))
get_block = ext4_get_block_unwritten;
else
get_block = ext4_get_block;
retry_alloc:
handle = ext4_journal_start(inode, EXT4_HT_WRITE_PAGE,
ext4_writepage_trans_blocks(inode));
if (IS_ERR(handle)) {
ret = VM_FAULT_SIGBUS;
goto out;
}
ext4: data=journal: fixes for ext4_page_mkwrite() These are two fixes for data journalling required by the next patch, discovered while testing it. First, the optimization to return early if all buffers are mapped is not appropriate for the next patch: The inode _must_ be added to the transaction's list in data=journal mode (so to write-protect pages on commit) thus we cannot return early there. Second, once that optimization to reduce transactions was disabled for data=journal mode, more transactions happened, and occasionally hit this warning message: 'JBD2: Spotted dirty metadata buffer'. Reason is, block_page_mkwrite() will set_buffer_dirty() before do_journal_get_write_access() that is there to prevent it. This issue was masked by the optimization. So, on data=journal use __block_write_begin() instead. This also requires page locking and len recalculation. (see block_page_mkwrite() for implementation details.) Finally, as Jan noted there is little sharing between data=journal and other modes in ext4_page_mkwrite(). However, a prototype of ext4_journalled_page_mkwrite() showed there still would be lots of duplicated lines (tens of) that didn't seem worth it. Thus this patch ends up with an ugly goto to skip all non-data journalling code (to avoid long indentations, but that can be changed..) in the beginning, and just a conditional in the transaction section. Well, we skip a common part to data journalling which is the page truncated check, but we do it again after ext4_journal_start() when we re-acquire the page lock (so not to acquire the page lock twice needlessly for data journalling.) Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201006004841.600488-4-mfo@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-06 08:48:40 +08:00
/*
* Data journalling can't use block_page_mkwrite() because it
* will set_buffer_dirty() before do_journal_get_write_access()
* thus might hit warning messages for dirty metadata buffers.
*/
if (!ext4_should_journal_data(inode)) {
err = block_page_mkwrite(vma, vmf, get_block);
} else {
lock_page(page);
size = i_size_read(inode);
/* Page got truncated from under us? */
if (page->mapping != mapping || page_offset(page) > size) {
ret = VM_FAULT_NOPAGE;
ext4: data=journal: write-protect pages on j_submit_inode_data_buffers() This implements journal callbacks j_submit|finish_inode_data_buffers() with different behavior for data=journal: to write-protect pages under commit, preventing changes to buffers writeably mapped to userspace. If a buffer's content changes between commit's checksum calculation and write-out to disk, it can cause journal recovery/mount failures upon a kernel crash or power loss. [ 27.334874] EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, and O_DIRECT support! [ 27.339492] JBD2: Invalid checksum recovering data block 8705 in log [ 27.342716] JBD2: recovery failed [ 27.343316] EXT4-fs (loop0): error loading journal mount: /ext4: can't read superblock on /dev/loop0. In j_submit_inode_data_buffers() we write-protect the inode's pages with write_cache_pages() and redirty w/ writepage callback if needed. In j_finish_inode_data_buffers() there is nothing do to. And in order to use the callbacks, inodes are added to the inode list in transaction in __ext4_journalled_writepage() and ext4_page_mkwrite(). In ext4_page_mkwrite() we must make sure that the buffers are attached to the transaction as jbddirty with write_end_fn(), as already done in __ext4_journalled_writepage(). Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Reported-by: Dann Frazier <dann.frazier@canonical.com> Reported-by: kernel test robot <lkp@intel.com> # wbc.nr_to_write Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201006004841.600488-5-mfo@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-06 08:48:41 +08:00
goto out_error;
}
ext4: data=journal: fixes for ext4_page_mkwrite() These are two fixes for data journalling required by the next patch, discovered while testing it. First, the optimization to return early if all buffers are mapped is not appropriate for the next patch: The inode _must_ be added to the transaction's list in data=journal mode (so to write-protect pages on commit) thus we cannot return early there. Second, once that optimization to reduce transactions was disabled for data=journal mode, more transactions happened, and occasionally hit this warning message: 'JBD2: Spotted dirty metadata buffer'. Reason is, block_page_mkwrite() will set_buffer_dirty() before do_journal_get_write_access() that is there to prevent it. This issue was masked by the optimization. So, on data=journal use __block_write_begin() instead. This also requires page locking and len recalculation. (see block_page_mkwrite() for implementation details.) Finally, as Jan noted there is little sharing between data=journal and other modes in ext4_page_mkwrite(). However, a prototype of ext4_journalled_page_mkwrite() showed there still would be lots of duplicated lines (tens of) that didn't seem worth it. Thus this patch ends up with an ugly goto to skip all non-data journalling code (to avoid long indentations, but that can be changed..) in the beginning, and just a conditional in the transaction section. Well, we skip a common part to data journalling which is the page truncated check, but we do it again after ext4_journal_start() when we re-acquire the page lock (so not to acquire the page lock twice needlessly for data journalling.) Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201006004841.600488-4-mfo@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-06 08:48:40 +08:00
if (page->index == size >> PAGE_SHIFT)
len = size & ~PAGE_MASK;
else
len = PAGE_SIZE;
err = __block_write_begin(page, 0, len, ext4_get_block);
if (!err) {
ext4: data=journal: write-protect pages on j_submit_inode_data_buffers() This implements journal callbacks j_submit|finish_inode_data_buffers() with different behavior for data=journal: to write-protect pages under commit, preventing changes to buffers writeably mapped to userspace. If a buffer's content changes between commit's checksum calculation and write-out to disk, it can cause journal recovery/mount failures upon a kernel crash or power loss. [ 27.334874] EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, and O_DIRECT support! [ 27.339492] JBD2: Invalid checksum recovering data block 8705 in log [ 27.342716] JBD2: recovery failed [ 27.343316] EXT4-fs (loop0): error loading journal mount: /ext4: can't read superblock on /dev/loop0. In j_submit_inode_data_buffers() we write-protect the inode's pages with write_cache_pages() and redirty w/ writepage callback if needed. In j_finish_inode_data_buffers() there is nothing do to. And in order to use the callbacks, inodes are added to the inode list in transaction in __ext4_journalled_writepage() and ext4_page_mkwrite(). In ext4_page_mkwrite() we must make sure that the buffers are attached to the transaction as jbddirty with write_end_fn(), as already done in __ext4_journalled_writepage(). Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Reported-by: Dann Frazier <dann.frazier@canonical.com> Reported-by: kernel test robot <lkp@intel.com> # wbc.nr_to_write Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201006004841.600488-5-mfo@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-06 08:48:41 +08:00
ret = VM_FAULT_SIGBUS;
if (ext4_walk_page_buffers(handle, inode,
page_buffers(page), 0, len, NULL,
do_journal_get_write_access))
ext4: data=journal: write-protect pages on j_submit_inode_data_buffers() This implements journal callbacks j_submit|finish_inode_data_buffers() with different behavior for data=journal: to write-protect pages under commit, preventing changes to buffers writeably mapped to userspace. If a buffer's content changes between commit's checksum calculation and write-out to disk, it can cause journal recovery/mount failures upon a kernel crash or power loss. [ 27.334874] EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, and O_DIRECT support! [ 27.339492] JBD2: Invalid checksum recovering data block 8705 in log [ 27.342716] JBD2: recovery failed [ 27.343316] EXT4-fs (loop0): error loading journal mount: /ext4: can't read superblock on /dev/loop0. In j_submit_inode_data_buffers() we write-protect the inode's pages with write_cache_pages() and redirty w/ writepage callback if needed. In j_finish_inode_data_buffers() there is nothing do to. And in order to use the callbacks, inodes are added to the inode list in transaction in __ext4_journalled_writepage() and ext4_page_mkwrite(). In ext4_page_mkwrite() we must make sure that the buffers are attached to the transaction as jbddirty with write_end_fn(), as already done in __ext4_journalled_writepage(). Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Reported-by: Dann Frazier <dann.frazier@canonical.com> Reported-by: kernel test robot <lkp@intel.com> # wbc.nr_to_write Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201006004841.600488-5-mfo@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-06 08:48:41 +08:00
goto out_error;
if (ext4_walk_page_buffers(handle, inode,
page_buffers(page), 0, len, NULL,
write_end_fn))
ext4: data=journal: write-protect pages on j_submit_inode_data_buffers() This implements journal callbacks j_submit|finish_inode_data_buffers() with different behavior for data=journal: to write-protect pages under commit, preventing changes to buffers writeably mapped to userspace. If a buffer's content changes between commit's checksum calculation and write-out to disk, it can cause journal recovery/mount failures upon a kernel crash or power loss. [ 27.334874] EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, and O_DIRECT support! [ 27.339492] JBD2: Invalid checksum recovering data block 8705 in log [ 27.342716] JBD2: recovery failed [ 27.343316] EXT4-fs (loop0): error loading journal mount: /ext4: can't read superblock on /dev/loop0. In j_submit_inode_data_buffers() we write-protect the inode's pages with write_cache_pages() and redirty w/ writepage callback if needed. In j_finish_inode_data_buffers() there is nothing do to. And in order to use the callbacks, inodes are added to the inode list in transaction in __ext4_journalled_writepage() and ext4_page_mkwrite(). In ext4_page_mkwrite() we must make sure that the buffers are attached to the transaction as jbddirty with write_end_fn(), as already done in __ext4_journalled_writepage(). Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Reported-by: Dann Frazier <dann.frazier@canonical.com> Reported-by: kernel test robot <lkp@intel.com> # wbc.nr_to_write Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201006004841.600488-5-mfo@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-06 08:48:41 +08:00
goto out_error;
if (ext4_jbd2_inode_add_write(handle, inode,
page_offset(page), len))
ext4: data=journal: write-protect pages on j_submit_inode_data_buffers() This implements journal callbacks j_submit|finish_inode_data_buffers() with different behavior for data=journal: to write-protect pages under commit, preventing changes to buffers writeably mapped to userspace. If a buffer's content changes between commit's checksum calculation and write-out to disk, it can cause journal recovery/mount failures upon a kernel crash or power loss. [ 27.334874] EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, and O_DIRECT support! [ 27.339492] JBD2: Invalid checksum recovering data block 8705 in log [ 27.342716] JBD2: recovery failed [ 27.343316] EXT4-fs (loop0): error loading journal mount: /ext4: can't read superblock on /dev/loop0. In j_submit_inode_data_buffers() we write-protect the inode's pages with write_cache_pages() and redirty w/ writepage callback if needed. In j_finish_inode_data_buffers() there is nothing do to. And in order to use the callbacks, inodes are added to the inode list in transaction in __ext4_journalled_writepage() and ext4_page_mkwrite(). In ext4_page_mkwrite() we must make sure that the buffers are attached to the transaction as jbddirty with write_end_fn(), as already done in __ext4_journalled_writepage(). Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Reported-by: Dann Frazier <dann.frazier@canonical.com> Reported-by: kernel test robot <lkp@intel.com> # wbc.nr_to_write Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201006004841.600488-5-mfo@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-06 08:48:41 +08:00
goto out_error;
ext4: data=journal: fixes for ext4_page_mkwrite() These are two fixes for data journalling required by the next patch, discovered while testing it. First, the optimization to return early if all buffers are mapped is not appropriate for the next patch: The inode _must_ be added to the transaction's list in data=journal mode (so to write-protect pages on commit) thus we cannot return early there. Second, once that optimization to reduce transactions was disabled for data=journal mode, more transactions happened, and occasionally hit this warning message: 'JBD2: Spotted dirty metadata buffer'. Reason is, block_page_mkwrite() will set_buffer_dirty() before do_journal_get_write_access() that is there to prevent it. This issue was masked by the optimization. So, on data=journal use __block_write_begin() instead. This also requires page locking and len recalculation. (see block_page_mkwrite() for implementation details.) Finally, as Jan noted there is little sharing between data=journal and other modes in ext4_page_mkwrite(). However, a prototype of ext4_journalled_page_mkwrite() showed there still would be lots of duplicated lines (tens of) that didn't seem worth it. Thus this patch ends up with an ugly goto to skip all non-data journalling code (to avoid long indentations, but that can be changed..) in the beginning, and just a conditional in the transaction section. Well, we skip a common part to data journalling which is the page truncated check, but we do it again after ext4_journal_start() when we re-acquire the page lock (so not to acquire the page lock twice needlessly for data journalling.) Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201006004841.600488-4-mfo@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-06 08:48:40 +08:00
ext4_set_inode_state(inode, EXT4_STATE_JDATA);
} else {
unlock_page(page);
}
}
ext4_journal_stop(handle);
if (err == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
goto retry_alloc;
out_ret:
ret = block_page_mkwrite_return(err);
out:
filemap_invalidate_unlock_shared(mapping);
sb_end_pagefault(inode->i_sb);
return ret;
ext4: data=journal: write-protect pages on j_submit_inode_data_buffers() This implements journal callbacks j_submit|finish_inode_data_buffers() with different behavior for data=journal: to write-protect pages under commit, preventing changes to buffers writeably mapped to userspace. If a buffer's content changes between commit's checksum calculation and write-out to disk, it can cause journal recovery/mount failures upon a kernel crash or power loss. [ 27.334874] EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, and O_DIRECT support! [ 27.339492] JBD2: Invalid checksum recovering data block 8705 in log [ 27.342716] JBD2: recovery failed [ 27.343316] EXT4-fs (loop0): error loading journal mount: /ext4: can't read superblock on /dev/loop0. In j_submit_inode_data_buffers() we write-protect the inode's pages with write_cache_pages() and redirty w/ writepage callback if needed. In j_finish_inode_data_buffers() there is nothing do to. And in order to use the callbacks, inodes are added to the inode list in transaction in __ext4_journalled_writepage() and ext4_page_mkwrite(). In ext4_page_mkwrite() we must make sure that the buffers are attached to the transaction as jbddirty with write_end_fn(), as already done in __ext4_journalled_writepage(). Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Reported-by: Dann Frazier <dann.frazier@canonical.com> Reported-by: kernel test robot <lkp@intel.com> # wbc.nr_to_write Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201006004841.600488-5-mfo@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-06 08:48:41 +08:00
out_error:
unlock_page(page);
ext4_journal_stop(handle);
goto out;
}