2005-04-17 06:20:36 +08:00
|
|
|
/*
|
|
|
|
* Intel & MS High Precision Event Timer Implementation.
|
|
|
|
*
|
|
|
|
* Copyright (C) 2003 Intel Corporation
|
|
|
|
* Venki Pallipadi
|
|
|
|
* (c) Copyright 2004 Hewlett-Packard Development Company, L.P.
|
|
|
|
* Bob Picco <robert.picco@hp.com>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/kernel.h>
|
2008-05-21 01:15:59 +08:00
|
|
|
#include <linux/smp_lock.h>
|
2005-04-17 06:20:36 +08:00
|
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/miscdevice.h>
|
|
|
|
#include <linux/major.h>
|
|
|
|
#include <linux/ioport.h>
|
|
|
|
#include <linux/fcntl.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/poll.h>
|
2006-10-21 03:17:02 +08:00
|
|
|
#include <linux/mm.h>
|
2005-04-17 06:20:36 +08:00
|
|
|
#include <linux/proc_fs.h>
|
|
|
|
#include <linux/spinlock.h>
|
|
|
|
#include <linux/sysctl.h>
|
|
|
|
#include <linux/wait.h>
|
|
|
|
#include <linux/bcd.h>
|
|
|
|
#include <linux/seq_file.h>
|
|
|
|
#include <linux/bitops.h>
|
2007-07-21 02:22:30 +08:00
|
|
|
#include <linux/clocksource.h>
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#include <asm/current.h>
|
|
|
|
#include <asm/uaccess.h>
|
|
|
|
#include <asm/system.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/irq.h>
|
|
|
|
#include <asm/div64.h>
|
|
|
|
|
|
|
|
#include <linux/acpi.h>
|
|
|
|
#include <acpi/acpi_bus.h>
|
|
|
|
#include <linux/hpet.h>
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The High Precision Event Timer driver.
|
|
|
|
* This driver is closely modelled after the rtc.c driver.
|
2008-11-24 16:28:36 +08:00
|
|
|
* http://www.intel.com/hardwaredesign/hpetspec_1.pdf
|
2005-04-17 06:20:36 +08:00
|
|
|
*/
|
|
|
|
#define HPET_USER_FREQ (64)
|
|
|
|
#define HPET_DRIFT (500)
|
|
|
|
|
2005-10-31 07:03:42 +08:00
|
|
|
#define HPET_RANGE_SIZE 1024 /* from HPET spec */
|
|
|
|
|
2008-07-30 03:47:38 +08:00
|
|
|
|
|
|
|
/* WARNING -- don't get confused. These macros are never used
|
|
|
|
* to write the (single) counter, and rarely to read it.
|
|
|
|
* They're badly named; to fix, someday.
|
|
|
|
*/
|
2007-07-21 02:22:30 +08:00
|
|
|
#if BITS_PER_LONG == 64
|
|
|
|
#define write_counter(V, MC) writeq(V, MC)
|
|
|
|
#define read_counter(MC) readq(MC)
|
|
|
|
#else
|
|
|
|
#define write_counter(V, MC) writel(V, MC)
|
|
|
|
#define read_counter(MC) readl(MC)
|
|
|
|
#endif
|
|
|
|
|
2005-10-31 07:03:31 +08:00
|
|
|
static u32 hpet_nhpet, hpet_max_freq = HPET_USER_FREQ;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-09-26 17:15:33 +08:00
|
|
|
/* This clocksource driver currently only works on ia64 */
|
|
|
|
#ifdef CONFIG_IA64
|
2007-07-21 02:22:30 +08:00
|
|
|
static void __iomem *hpet_mctr;
|
|
|
|
|
2009-04-22 03:24:00 +08:00
|
|
|
static cycle_t read_hpet(struct clocksource *cs)
|
2007-07-21 02:22:30 +08:00
|
|
|
{
|
|
|
|
return (cycle_t)read_counter((void __iomem *)hpet_mctr);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct clocksource clocksource_hpet = {
|
|
|
|
.name = "hpet",
|
|
|
|
.rating = 250,
|
|
|
|
.read = read_hpet,
|
2007-07-27 00:34:49 +08:00
|
|
|
.mask = CLOCKSOURCE_MASK(64),
|
2008-07-30 03:47:38 +08:00
|
|
|
.mult = 0, /* to be calculated */
|
2007-07-21 02:22:30 +08:00
|
|
|
.shift = 10,
|
|
|
|
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
|
|
|
};
|
|
|
|
static struct clocksource *hpet_clocksource;
|
2007-09-26 17:15:33 +08:00
|
|
|
#endif
|
2007-07-21 02:22:30 +08:00
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
/* A lock for concurrent access by app and isr hpet activity. */
|
|
|
|
static DEFINE_SPINLOCK(hpet_lock);
|
|
|
|
|
|
|
|
#define HPET_DEV_NAME (7)
|
|
|
|
|
|
|
|
struct hpet_dev {
|
|
|
|
struct hpets *hd_hpets;
|
|
|
|
struct hpet __iomem *hd_hpet;
|
|
|
|
struct hpet_timer __iomem *hd_timer;
|
|
|
|
unsigned long hd_ireqfreq;
|
|
|
|
unsigned long hd_irqdata;
|
|
|
|
wait_queue_head_t hd_waitqueue;
|
|
|
|
struct fasync_struct *hd_async_queue;
|
|
|
|
unsigned int hd_flags;
|
|
|
|
unsigned int hd_irq;
|
|
|
|
unsigned int hd_hdwirq;
|
|
|
|
char hd_name[HPET_DEV_NAME];
|
|
|
|
};
|
|
|
|
|
|
|
|
struct hpets {
|
|
|
|
struct hpets *hp_next;
|
|
|
|
struct hpet __iomem *hp_hpet;
|
|
|
|
unsigned long hp_hpet_phys;
|
2007-07-21 02:22:30 +08:00
|
|
|
struct clocksource *hp_clocksource;
|
2005-10-31 07:03:31 +08:00
|
|
|
unsigned long long hp_tick_freq;
|
2005-04-17 06:20:36 +08:00
|
|
|
unsigned long hp_delta;
|
|
|
|
unsigned int hp_ntimer;
|
|
|
|
unsigned int hp_which;
|
|
|
|
struct hpet_dev hp_dev[1];
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct hpets *hpets;
|
|
|
|
|
|
|
|
#define HPET_OPEN 0x0001
|
|
|
|
#define HPET_IE 0x0002 /* interrupt enabled */
|
|
|
|
#define HPET_PERIODIC 0x0004
|
2005-10-31 07:03:34 +08:00
|
|
|
#define HPET_SHARED_IRQ 0x0008
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
|
|
|
|
#ifndef readq
|
2005-09-10 15:26:52 +08:00
|
|
|
static inline unsigned long long readq(void __iomem *addr)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
return readl(addr) | (((unsigned long long)readl(addr + 4)) << 32LL);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifndef writeq
|
2005-09-10 15:26:52 +08:00
|
|
|
static inline void writeq(unsigned long long v, void __iomem *addr)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
writel(v & 0xffffffff, addr);
|
|
|
|
writel(v >> 32, addr + 4);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.
The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).
Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.
Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.
I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.
This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().
Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.
(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.
(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
|
|
|
static irqreturn_t hpet_interrupt(int irq, void *data)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
struct hpet_dev *devp;
|
|
|
|
unsigned long isr;
|
|
|
|
|
|
|
|
devp = data;
|
2005-10-31 07:03:34 +08:00
|
|
|
isr = 1 << (devp - devp->hd_hpets->hp_dev);
|
|
|
|
|
|
|
|
if ((devp->hd_flags & HPET_SHARED_IRQ) &&
|
|
|
|
!(isr & readl(&devp->hd_hpet->hpet_isr)))
|
|
|
|
return IRQ_NONE;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
spin_lock(&hpet_lock);
|
|
|
|
devp->hd_irqdata++;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* For non-periodic timers, increment the accumulator.
|
|
|
|
* This has the effect of treating non-periodic like periodic.
|
|
|
|
*/
|
|
|
|
if ((devp->hd_flags & (HPET_IE | HPET_PERIODIC)) == HPET_IE) {
|
|
|
|
unsigned long m, t;
|
|
|
|
|
|
|
|
t = devp->hd_ireqfreq;
|
hpet: hpet driver periodic timer setup bug fixes
The periodic interrupt from drivers/char/hpet.c does not work correctly,
both when using the periodic capability of the hardware and while
emulating the periodic interrupt (when hardware does not support periodic
mode).
With timers capable of periodic interrupts, the comparator field is first
set with the period value followed by set of hidden accumulator, which has
the side effect of overwriting the comparator value. This results in
wrong periodicity for the interrupts. For, periodic interrupts to work,
following steps are necessary, in that order.
* Set config with Tn_VAL_SET_CNF bit
* Write to hidden accumulator, the value written is the time when the
first interrupt should be generated
* Write compartor with period interval for subsequent interrupts
(http://www.intel.com/hardwaredesign/hpetspec_1.pdf )
When emulating periodic timer with timers not capable of periodic
interrupt, driver is adding the period to counter value instead of
comparator value, which causes slow drift when using this emulation.
Also, driver seems to add hpetp->hp_delta both while setting up periodic
interrupt and while emulating periodic interrupts with timers not capable
of doing periodic interrupts. This hp_delta will result in slower than
expected interrupt rate and should not be used while setting the interval.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Nils Carlson <nils.carlson@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 06:57:13 +08:00
|
|
|
m = read_counter(&devp->hd_timer->hpet_compare);
|
|
|
|
write_counter(t + m, &devp->hd_timer->hpet_compare);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
2005-10-31 07:03:34 +08:00
|
|
|
if (devp->hd_flags & HPET_SHARED_IRQ)
|
|
|
|
writel(isr, &devp->hd_hpet->hpet_isr);
|
2005-04-17 06:20:36 +08:00
|
|
|
spin_unlock(&hpet_lock);
|
|
|
|
|
|
|
|
wake_up_interruptible(&devp->hd_waitqueue);
|
|
|
|
|
|
|
|
kill_fasync(&devp->hd_async_queue, SIGIO, POLL_IN);
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
2008-05-29 18:41:04 +08:00
|
|
|
static void hpet_timer_set_irq(struct hpet_dev *devp)
|
|
|
|
{
|
|
|
|
unsigned long v;
|
|
|
|
int irq, gsi;
|
|
|
|
struct hpet_timer __iomem *timer;
|
|
|
|
|
|
|
|
spin_lock_irq(&hpet_lock);
|
|
|
|
if (devp->hd_hdwirq) {
|
|
|
|
spin_unlock_irq(&hpet_lock);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
timer = devp->hd_timer;
|
|
|
|
|
|
|
|
/* we prefer level triggered mode */
|
|
|
|
v = readl(&timer->hpet_config);
|
|
|
|
if (!(v & Tn_INT_TYPE_CNF_MASK)) {
|
|
|
|
v |= Tn_INT_TYPE_CNF_MASK;
|
|
|
|
writel(v, &timer->hpet_config);
|
|
|
|
}
|
|
|
|
spin_unlock_irq(&hpet_lock);
|
|
|
|
|
|
|
|
v = (readq(&timer->hpet_config) & Tn_INT_ROUTE_CAP_MASK) >>
|
|
|
|
Tn_INT_ROUTE_CAP_SHIFT;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* In PIC mode, skip IRQ0-4, IRQ6-9, IRQ12-15 which is always used by
|
|
|
|
* legacy device. In IO APIC mode, we skip all the legacy IRQS.
|
|
|
|
*/
|
|
|
|
if (acpi_irq_model == ACPI_IRQ_MODEL_PIC)
|
|
|
|
v &= ~0xf3df;
|
|
|
|
else
|
|
|
|
v &= ~0xffff;
|
|
|
|
|
|
|
|
for (irq = find_first_bit(&v, HPET_MAX_IRQ); irq < HPET_MAX_IRQ;
|
|
|
|
irq = find_next_bit(&v, HPET_MAX_IRQ, 1 + irq)) {
|
|
|
|
|
2008-08-20 11:49:49 +08:00
|
|
|
if (irq >= nr_irqs) {
|
2008-05-29 18:41:04 +08:00
|
|
|
irq = HPET_MAX_IRQ;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2009-04-28 09:01:20 +08:00
|
|
|
gsi = acpi_register_gsi(NULL, irq, ACPI_LEVEL_SENSITIVE,
|
2008-05-29 18:41:04 +08:00
|
|
|
ACPI_ACTIVE_LOW);
|
|
|
|
if (gsi > 0)
|
|
|
|
break;
|
|
|
|
|
|
|
|
/* FIXME: Setup interrupt source table */
|
|
|
|
}
|
|
|
|
|
|
|
|
if (irq < HPET_MAX_IRQ) {
|
|
|
|
spin_lock_irq(&hpet_lock);
|
|
|
|
v = readl(&timer->hpet_config);
|
|
|
|
v |= irq << Tn_INT_ROUTE_CNF_SHIFT;
|
|
|
|
writel(v, &timer->hpet_config);
|
|
|
|
devp->hd_hdwirq = gsi;
|
|
|
|
spin_unlock_irq(&hpet_lock);
|
|
|
|
}
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
static int hpet_open(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
struct hpet_dev *devp;
|
|
|
|
struct hpets *hpetp;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (file->f_mode & FMODE_WRITE)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2008-05-21 01:15:59 +08:00
|
|
|
lock_kernel();
|
2005-04-17 06:20:36 +08:00
|
|
|
spin_lock_irq(&hpet_lock);
|
|
|
|
|
|
|
|
for (devp = NULL, hpetp = hpets; hpetp && !devp; hpetp = hpetp->hp_next)
|
|
|
|
for (i = 0; i < hpetp->hp_ntimer; i++)
|
2008-07-30 03:47:38 +08:00
|
|
|
if (hpetp->hp_dev[i].hd_flags & HPET_OPEN)
|
2005-04-17 06:20:36 +08:00
|
|
|
continue;
|
|
|
|
else {
|
|
|
|
devp = &hpetp->hp_dev[i];
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!devp) {
|
|
|
|
spin_unlock_irq(&hpet_lock);
|
2008-05-21 01:15:59 +08:00
|
|
|
unlock_kernel();
|
2005-04-17 06:20:36 +08:00
|
|
|
return -EBUSY;
|
|
|
|
}
|
|
|
|
|
|
|
|
file->private_data = devp;
|
|
|
|
devp->hd_irqdata = 0;
|
|
|
|
devp->hd_flags |= HPET_OPEN;
|
|
|
|
spin_unlock_irq(&hpet_lock);
|
2008-05-21 01:15:59 +08:00
|
|
|
unlock_kernel();
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2008-05-29 18:41:04 +08:00
|
|
|
hpet_timer_set_irq(devp);
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t
|
|
|
|
hpet_read(struct file *file, char __user *buf, size_t count, loff_t * ppos)
|
|
|
|
{
|
|
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
|
|
unsigned long data;
|
|
|
|
ssize_t retval;
|
|
|
|
struct hpet_dev *devp;
|
|
|
|
|
|
|
|
devp = file->private_data;
|
|
|
|
if (!devp->hd_ireqfreq)
|
|
|
|
return -EIO;
|
|
|
|
|
|
|
|
if (count < sizeof(unsigned long))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
add_wait_queue(&devp->hd_waitqueue, &wait);
|
|
|
|
|
|
|
|
for ( ; ; ) {
|
|
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
|
|
|
|
|
|
spin_lock_irq(&hpet_lock);
|
|
|
|
data = devp->hd_irqdata;
|
|
|
|
devp->hd_irqdata = 0;
|
|
|
|
spin_unlock_irq(&hpet_lock);
|
|
|
|
|
|
|
|
if (data)
|
|
|
|
break;
|
|
|
|
else if (file->f_flags & O_NONBLOCK) {
|
|
|
|
retval = -EAGAIN;
|
|
|
|
goto out;
|
|
|
|
} else if (signal_pending(current)) {
|
|
|
|
retval = -ERESTARTSYS;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
schedule();
|
|
|
|
}
|
|
|
|
|
|
|
|
retval = put_user(data, (unsigned long __user *)buf);
|
|
|
|
if (!retval)
|
|
|
|
retval = sizeof(unsigned long);
|
|
|
|
out:
|
|
|
|
__set_current_state(TASK_RUNNING);
|
|
|
|
remove_wait_queue(&devp->hd_waitqueue, &wait);
|
|
|
|
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
static unsigned int hpet_poll(struct file *file, poll_table * wait)
|
|
|
|
{
|
|
|
|
unsigned long v;
|
|
|
|
struct hpet_dev *devp;
|
|
|
|
|
|
|
|
devp = file->private_data;
|
|
|
|
|
|
|
|
if (!devp->hd_ireqfreq)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
poll_wait(file, &devp->hd_waitqueue, wait);
|
|
|
|
|
|
|
|
spin_lock_irq(&hpet_lock);
|
|
|
|
v = devp->hd_irqdata;
|
|
|
|
spin_unlock_irq(&hpet_lock);
|
|
|
|
|
|
|
|
if (v != 0)
|
|
|
|
return POLLIN | POLLRDNORM;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int hpet_mmap(struct file *file, struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_HPET_MMAP
|
|
|
|
struct hpet_dev *devp;
|
|
|
|
unsigned long addr;
|
|
|
|
|
|
|
|
if (((vma->vm_end - vma->vm_start) != PAGE_SIZE) || vma->vm_pgoff)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
devp = file->private_data;
|
|
|
|
addr = devp->hd_hpets->hp_hpet_phys;
|
|
|
|
|
|
|
|
if (addr & (PAGE_SIZE - 1))
|
|
|
|
return -ENOSYS;
|
|
|
|
|
|
|
|
vma->vm_flags |= VM_IO;
|
|
|
|
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
|
|
|
|
|
|
|
|
if (io_remap_pfn_range(vma, vma->vm_start, addr >> PAGE_SHIFT,
|
|
|
|
PAGE_SIZE, vma->vm_page_prot)) {
|
2005-10-31 07:03:44 +08:00
|
|
|
printk(KERN_ERR "%s: io_remap_pfn_range failed\n",
|
2008-04-30 15:55:10 +08:00
|
|
|
__func__);
|
2005-04-17 06:20:36 +08:00
|
|
|
return -EAGAIN;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
#else
|
|
|
|
return -ENOSYS;
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
static int hpet_fasync(int fd, struct file *file, int on)
|
|
|
|
{
|
|
|
|
struct hpet_dev *devp;
|
|
|
|
|
|
|
|
devp = file->private_data;
|
|
|
|
|
|
|
|
if (fasync_helper(fd, file, on, &devp->hd_async_queue) >= 0)
|
|
|
|
return 0;
|
|
|
|
else
|
|
|
|
return -EIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int hpet_release(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
struct hpet_dev *devp;
|
|
|
|
struct hpet_timer __iomem *timer;
|
|
|
|
int irq = 0;
|
|
|
|
|
|
|
|
devp = file->private_data;
|
|
|
|
timer = devp->hd_timer;
|
|
|
|
|
|
|
|
spin_lock_irq(&hpet_lock);
|
|
|
|
|
|
|
|
writeq((readq(&timer->hpet_config) & ~Tn_INT_ENB_CNF_MASK),
|
|
|
|
&timer->hpet_config);
|
|
|
|
|
|
|
|
irq = devp->hd_irq;
|
|
|
|
devp->hd_irq = 0;
|
|
|
|
|
|
|
|
devp->hd_ireqfreq = 0;
|
|
|
|
|
|
|
|
if (devp->hd_flags & HPET_PERIODIC
|
|
|
|
&& readq(&timer->hpet_config) & Tn_TYPE_CNF_MASK) {
|
|
|
|
unsigned long v;
|
|
|
|
|
|
|
|
v = readq(&timer->hpet_config);
|
|
|
|
v ^= Tn_TYPE_CNF_MASK;
|
|
|
|
writeq(v, &timer->hpet_config);
|
|
|
|
}
|
|
|
|
|
|
|
|
devp->hd_flags &= ~(HPET_OPEN | HPET_IE | HPET_PERIODIC);
|
|
|
|
spin_unlock_irq(&hpet_lock);
|
|
|
|
|
|
|
|
if (irq)
|
|
|
|
free_irq(irq, devp);
|
|
|
|
|
|
|
|
file->private_data = NULL;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int hpet_ioctl_common(struct hpet_dev *, int, unsigned long, int);
|
|
|
|
|
|
|
|
static int
|
|
|
|
hpet_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
|
|
|
|
unsigned long arg)
|
|
|
|
{
|
|
|
|
struct hpet_dev *devp;
|
|
|
|
|
|
|
|
devp = file->private_data;
|
|
|
|
return hpet_ioctl_common(devp, cmd, arg, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int hpet_ioctl_ieon(struct hpet_dev *devp)
|
|
|
|
{
|
|
|
|
struct hpet_timer __iomem *timer;
|
|
|
|
struct hpet __iomem *hpet;
|
|
|
|
struct hpets *hpetp;
|
|
|
|
int irq;
|
|
|
|
unsigned long g, v, t, m;
|
|
|
|
unsigned long flags, isr;
|
|
|
|
|
|
|
|
timer = devp->hd_timer;
|
|
|
|
hpet = devp->hd_hpet;
|
|
|
|
hpetp = devp->hd_hpets;
|
|
|
|
|
2005-10-31 07:03:29 +08:00
|
|
|
if (!devp->hd_ireqfreq)
|
|
|
|
return -EIO;
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
spin_lock_irq(&hpet_lock);
|
|
|
|
|
|
|
|
if (devp->hd_flags & HPET_IE) {
|
|
|
|
spin_unlock_irq(&hpet_lock);
|
|
|
|
return -EBUSY;
|
|
|
|
}
|
|
|
|
|
|
|
|
devp->hd_flags |= HPET_IE;
|
2005-10-31 07:03:34 +08:00
|
|
|
|
|
|
|
if (readl(&timer->hpet_config) & Tn_INT_TYPE_CNF_MASK)
|
|
|
|
devp->hd_flags |= HPET_SHARED_IRQ;
|
2005-04-17 06:20:36 +08:00
|
|
|
spin_unlock_irq(&hpet_lock);
|
|
|
|
|
|
|
|
irq = devp->hd_hdwirq;
|
|
|
|
|
|
|
|
if (irq) {
|
2005-10-31 07:03:34 +08:00
|
|
|
unsigned long irq_flags;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2005-10-31 07:03:34 +08:00
|
|
|
sprintf(devp->hd_name, "hpet%d", (int)(devp - hpetp->hp_dev));
|
|
|
|
irq_flags = devp->hd_flags & HPET_SHARED_IRQ
|
2006-07-02 10:29:33 +08:00
|
|
|
? IRQF_SHARED : IRQF_DISABLED;
|
2005-10-31 07:03:34 +08:00
|
|
|
if (request_irq(irq, hpet_interrupt, irq_flags,
|
|
|
|
devp->hd_name, (void *)devp)) {
|
2005-04-17 06:20:36 +08:00
|
|
|
printk(KERN_ERR "hpet: IRQ %d is not free\n", irq);
|
|
|
|
irq = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (irq == 0) {
|
|
|
|
spin_lock_irq(&hpet_lock);
|
|
|
|
devp->hd_flags ^= HPET_IE;
|
|
|
|
spin_unlock_irq(&hpet_lock);
|
|
|
|
return -EIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
devp->hd_irq = irq;
|
|
|
|
t = devp->hd_ireqfreq;
|
|
|
|
v = readq(&timer->hpet_config);
|
2008-07-30 03:47:38 +08:00
|
|
|
|
|
|
|
/* 64-bit comparators are not yet supported through the ioctls,
|
|
|
|
* so force this into 32-bit mode if it supports both modes
|
|
|
|
*/
|
|
|
|
g = v | Tn_32MODE_CNF_MASK | Tn_INT_ENB_CNF_MASK;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
if (devp->hd_flags & HPET_PERIODIC) {
|
|
|
|
g |= Tn_TYPE_CNF_MASK;
|
hpet: hpet driver periodic timer setup bug fixes
The periodic interrupt from drivers/char/hpet.c does not work correctly,
both when using the periodic capability of the hardware and while
emulating the periodic interrupt (when hardware does not support periodic
mode).
With timers capable of periodic interrupts, the comparator field is first
set with the period value followed by set of hidden accumulator, which has
the side effect of overwriting the comparator value. This results in
wrong periodicity for the interrupts. For, periodic interrupts to work,
following steps are necessary, in that order.
* Set config with Tn_VAL_SET_CNF bit
* Write to hidden accumulator, the value written is the time when the
first interrupt should be generated
* Write compartor with period interval for subsequent interrupts
(http://www.intel.com/hardwaredesign/hpetspec_1.pdf )
When emulating periodic timer with timers not capable of periodic
interrupt, driver is adding the period to counter value instead of
comparator value, which causes slow drift when using this emulation.
Also, driver seems to add hpetp->hp_delta both while setting up periodic
interrupt and while emulating periodic interrupts with timers not capable
of doing periodic interrupts. This hp_delta will result in slower than
expected interrupt rate and should not be used while setting the interval.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Nils Carlson <nils.carlson@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 06:57:13 +08:00
|
|
|
v |= Tn_TYPE_CNF_MASK | Tn_VAL_SET_CNF_MASK;
|
2005-04-17 06:20:36 +08:00
|
|
|
writeq(v, &timer->hpet_config);
|
|
|
|
local_irq_save(flags);
|
2008-07-30 03:47:38 +08:00
|
|
|
|
hpet: hpet driver periodic timer setup bug fixes
The periodic interrupt from drivers/char/hpet.c does not work correctly,
both when using the periodic capability of the hardware and while
emulating the periodic interrupt (when hardware does not support periodic
mode).
With timers capable of periodic interrupts, the comparator field is first
set with the period value followed by set of hidden accumulator, which has
the side effect of overwriting the comparator value. This results in
wrong periodicity for the interrupts. For, periodic interrupts to work,
following steps are necessary, in that order.
* Set config with Tn_VAL_SET_CNF bit
* Write to hidden accumulator, the value written is the time when the
first interrupt should be generated
* Write compartor with period interval for subsequent interrupts
(http://www.intel.com/hardwaredesign/hpetspec_1.pdf )
When emulating periodic timer with timers not capable of periodic
interrupt, driver is adding the period to counter value instead of
comparator value, which causes slow drift when using this emulation.
Also, driver seems to add hpetp->hp_delta both while setting up periodic
interrupt and while emulating periodic interrupts with timers not capable
of doing periodic interrupts. This hp_delta will result in slower than
expected interrupt rate and should not be used while setting the interval.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Nils Carlson <nils.carlson@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 06:57:13 +08:00
|
|
|
/*
|
|
|
|
* NOTE: First we modify the hidden accumulator
|
2008-07-30 03:47:38 +08:00
|
|
|
* register supported by periodic-capable comparators.
|
|
|
|
* We never want to modify the (single) counter; that
|
hpet: hpet driver periodic timer setup bug fixes
The periodic interrupt from drivers/char/hpet.c does not work correctly,
both when using the periodic capability of the hardware and while
emulating the periodic interrupt (when hardware does not support periodic
mode).
With timers capable of periodic interrupts, the comparator field is first
set with the period value followed by set of hidden accumulator, which has
the side effect of overwriting the comparator value. This results in
wrong periodicity for the interrupts. For, periodic interrupts to work,
following steps are necessary, in that order.
* Set config with Tn_VAL_SET_CNF bit
* Write to hidden accumulator, the value written is the time when the
first interrupt should be generated
* Write compartor with period interval for subsequent interrupts
(http://www.intel.com/hardwaredesign/hpetspec_1.pdf )
When emulating periodic timer with timers not capable of periodic
interrupt, driver is adding the period to counter value instead of
comparator value, which causes slow drift when using this emulation.
Also, driver seems to add hpetp->hp_delta both while setting up periodic
interrupt and while emulating periodic interrupts with timers not capable
of doing periodic interrupts. This hp_delta will result in slower than
expected interrupt rate and should not be used while setting the interval.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Nils Carlson <nils.carlson@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 06:57:13 +08:00
|
|
|
* would affect all the comparators. The value written
|
|
|
|
* is the counter value when the first interrupt is due.
|
2008-07-30 03:47:38 +08:00
|
|
|
*/
|
2005-04-17 06:20:36 +08:00
|
|
|
m = read_counter(&hpet->hpet_mc);
|
|
|
|
write_counter(t + m + hpetp->hp_delta, &timer->hpet_compare);
|
hpet: hpet driver periodic timer setup bug fixes
The periodic interrupt from drivers/char/hpet.c does not work correctly,
both when using the periodic capability of the hardware and while
emulating the periodic interrupt (when hardware does not support periodic
mode).
With timers capable of periodic interrupts, the comparator field is first
set with the period value followed by set of hidden accumulator, which has
the side effect of overwriting the comparator value. This results in
wrong periodicity for the interrupts. For, periodic interrupts to work,
following steps are necessary, in that order.
* Set config with Tn_VAL_SET_CNF bit
* Write to hidden accumulator, the value written is the time when the
first interrupt should be generated
* Write compartor with period interval for subsequent interrupts
(http://www.intel.com/hardwaredesign/hpetspec_1.pdf )
When emulating periodic timer with timers not capable of periodic
interrupt, driver is adding the period to counter value instead of
comparator value, which causes slow drift when using this emulation.
Also, driver seems to add hpetp->hp_delta both while setting up periodic
interrupt and while emulating periodic interrupts with timers not capable
of doing periodic interrupts. This hp_delta will result in slower than
expected interrupt rate and should not be used while setting the interval.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Nils Carlson <nils.carlson@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 06:57:13 +08:00
|
|
|
/*
|
|
|
|
* Then we modify the comparator, indicating the period
|
|
|
|
* for subsequent interrupt.
|
|
|
|
*/
|
|
|
|
write_counter(t, &timer->hpet_compare);
|
2005-04-17 06:20:36 +08:00
|
|
|
} else {
|
|
|
|
local_irq_save(flags);
|
|
|
|
m = read_counter(&hpet->hpet_mc);
|
|
|
|
write_counter(t + m + hpetp->hp_delta, &timer->hpet_compare);
|
|
|
|
}
|
|
|
|
|
2005-10-31 07:03:34 +08:00
|
|
|
if (devp->hd_flags & HPET_SHARED_IRQ) {
|
2005-10-31 07:03:39 +08:00
|
|
|
isr = 1 << (devp - devp->hd_hpets->hp_dev);
|
2005-10-31 07:03:34 +08:00
|
|
|
writel(isr, &hpet->hpet_isr);
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
writeq(g, &timer->hpet_config);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-10-31 07:03:31 +08:00
|
|
|
/* converts Hz to number of timer ticks */
|
|
|
|
static inline unsigned long hpet_time_div(struct hpets *hpets,
|
|
|
|
unsigned long dis)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2005-10-31 07:03:31 +08:00
|
|
|
unsigned long long m;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2005-10-31 07:03:31 +08:00
|
|
|
m = hpets->hp_tick_freq + (dis >> 1);
|
2005-04-17 06:20:36 +08:00
|
|
|
do_div(m, dis);
|
|
|
|
return (unsigned long)m;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
hpet_ioctl_common(struct hpet_dev *devp, int cmd, unsigned long arg, int kernel)
|
|
|
|
{
|
|
|
|
struct hpet_timer __iomem *timer;
|
|
|
|
struct hpet __iomem *hpet;
|
|
|
|
struct hpets *hpetp;
|
|
|
|
int err;
|
|
|
|
unsigned long v;
|
|
|
|
|
|
|
|
switch (cmd) {
|
|
|
|
case HPET_IE_OFF:
|
|
|
|
case HPET_INFO:
|
|
|
|
case HPET_EPI:
|
|
|
|
case HPET_DPI:
|
|
|
|
case HPET_IRQFREQ:
|
|
|
|
timer = devp->hd_timer;
|
|
|
|
hpet = devp->hd_hpet;
|
|
|
|
hpetp = devp->hd_hpets;
|
|
|
|
break;
|
|
|
|
case HPET_IE_ON:
|
|
|
|
return hpet_ioctl_ieon(devp);
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = 0;
|
|
|
|
|
|
|
|
switch (cmd) {
|
|
|
|
case HPET_IE_OFF:
|
|
|
|
if ((devp->hd_flags & HPET_IE) == 0)
|
|
|
|
break;
|
|
|
|
v = readq(&timer->hpet_config);
|
|
|
|
v &= ~Tn_INT_ENB_CNF_MASK;
|
|
|
|
writeq(v, &timer->hpet_config);
|
|
|
|
if (devp->hd_irq) {
|
|
|
|
free_irq(devp->hd_irq, devp);
|
|
|
|
devp->hd_irq = 0;
|
|
|
|
}
|
|
|
|
devp->hd_flags ^= HPET_IE;
|
|
|
|
break;
|
|
|
|
case HPET_INFO:
|
|
|
|
{
|
|
|
|
struct hpet_info info;
|
|
|
|
|
2005-10-31 07:03:38 +08:00
|
|
|
if (devp->hd_ireqfreq)
|
|
|
|
info.hi_ireqfreq =
|
|
|
|
hpet_time_div(hpetp, devp->hd_ireqfreq);
|
|
|
|
else
|
|
|
|
info.hi_ireqfreq = 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
info.hi_flags =
|
|
|
|
readq(&timer->hpet_config) & Tn_PER_INT_CAP_MASK;
|
2005-10-31 07:03:40 +08:00
|
|
|
info.hi_hpet = hpetp->hp_which;
|
|
|
|
info.hi_timer = devp - hpetp->hp_dev;
|
2005-10-31 07:03:37 +08:00
|
|
|
if (kernel)
|
|
|
|
memcpy((void *)arg, &info, sizeof(info));
|
|
|
|
else
|
|
|
|
if (copy_to_user((void __user *)arg, &info,
|
|
|
|
sizeof(info)))
|
|
|
|
err = -EFAULT;
|
2005-04-17 06:20:36 +08:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
case HPET_EPI:
|
|
|
|
v = readq(&timer->hpet_config);
|
|
|
|
if ((v & Tn_PER_INT_CAP_MASK) == 0) {
|
|
|
|
err = -ENXIO;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
devp->hd_flags |= HPET_PERIODIC;
|
|
|
|
break;
|
|
|
|
case HPET_DPI:
|
|
|
|
v = readq(&timer->hpet_config);
|
|
|
|
if ((v & Tn_PER_INT_CAP_MASK) == 0) {
|
|
|
|
err = -ENXIO;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (devp->hd_flags & HPET_PERIODIC &&
|
|
|
|
readq(&timer->hpet_config) & Tn_TYPE_CNF_MASK) {
|
|
|
|
v = readq(&timer->hpet_config);
|
|
|
|
v ^= Tn_TYPE_CNF_MASK;
|
|
|
|
writeq(v, &timer->hpet_config);
|
|
|
|
}
|
|
|
|
devp->hd_flags &= ~HPET_PERIODIC;
|
|
|
|
break;
|
|
|
|
case HPET_IRQFREQ:
|
|
|
|
if (!kernel && (arg > hpet_max_freq) &&
|
|
|
|
!capable(CAP_SYS_RESOURCE)) {
|
|
|
|
err = -EACCES;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2005-10-31 07:03:33 +08:00
|
|
|
if (!arg) {
|
2005-04-17 06:20:36 +08:00
|
|
|
err = -EINVAL;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2005-10-31 07:03:31 +08:00
|
|
|
devp->hd_ireqfreq = hpet_time_div(hpetp, arg);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2006-07-03 15:24:21 +08:00
|
|
|
static const struct file_operations hpet_fops = {
|
2005-04-17 06:20:36 +08:00
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.llseek = no_llseek,
|
|
|
|
.read = hpet_read,
|
|
|
|
.poll = hpet_poll,
|
|
|
|
.ioctl = hpet_ioctl,
|
|
|
|
.open = hpet_open,
|
|
|
|
.release = hpet_release,
|
|
|
|
.fasync = hpet_fasync,
|
|
|
|
.mmap = hpet_mmap,
|
|
|
|
};
|
|
|
|
|
2005-10-31 07:03:44 +08:00
|
|
|
static int hpet_is_known(struct hpet_data *hdp)
|
|
|
|
{
|
|
|
|
struct hpets *hpetp;
|
|
|
|
|
|
|
|
for (hpetp = hpets; hpetp; hpetp = hpetp->hp_next)
|
|
|
|
if (hpetp->hp_hpet_phys == hdp->hd_phys_address)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
static ctl_table hpet_table[] = {
|
|
|
|
{
|
2007-02-14 16:33:51 +08:00
|
|
|
.ctl_name = CTL_UNNUMBERED,
|
2005-04-17 06:20:36 +08:00
|
|
|
.procname = "max-user-freq",
|
|
|
|
.data = &hpet_max_freq,
|
|
|
|
.maxlen = sizeof(int),
|
|
|
|
.mode = 0644,
|
|
|
|
.proc_handler = &proc_dointvec,
|
|
|
|
},
|
|
|
|
{.ctl_name = 0}
|
|
|
|
};
|
|
|
|
|
|
|
|
static ctl_table hpet_root[] = {
|
|
|
|
{
|
2007-02-14 16:33:51 +08:00
|
|
|
.ctl_name = CTL_UNNUMBERED,
|
2005-04-17 06:20:36 +08:00
|
|
|
.procname = "hpet",
|
|
|
|
.maxlen = 0,
|
|
|
|
.mode = 0555,
|
|
|
|
.child = hpet_table,
|
|
|
|
},
|
|
|
|
{.ctl_name = 0}
|
|
|
|
};
|
|
|
|
|
|
|
|
static ctl_table dev_root[] = {
|
|
|
|
{
|
|
|
|
.ctl_name = CTL_DEV,
|
|
|
|
.procname = "dev",
|
|
|
|
.maxlen = 0,
|
|
|
|
.mode = 0555,
|
|
|
|
.child = hpet_root,
|
|
|
|
},
|
|
|
|
{.ctl_name = 0}
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct ctl_table_header *sysctl_header;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Adjustment for when arming the timer with
|
|
|
|
* initial conditions. That is, main counter
|
|
|
|
* ticks expired before interrupts are enabled.
|
|
|
|
*/
|
|
|
|
#define TICK_CALIBRATE (1000UL)
|
|
|
|
|
2009-04-03 07:58:31 +08:00
|
|
|
static unsigned long __hpet_calibrate(struct hpets *hpetp)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
struct hpet_timer __iomem *timer = NULL;
|
|
|
|
unsigned long t, m, count, i, flags, start;
|
|
|
|
struct hpet_dev *devp;
|
|
|
|
int j;
|
|
|
|
struct hpet __iomem *hpet;
|
|
|
|
|
|
|
|
for (j = 0, devp = hpetp->hp_dev; j < hpetp->hp_ntimer; j++, devp++)
|
|
|
|
if ((devp->hd_flags & HPET_OPEN) == 0) {
|
|
|
|
timer = devp->hd_timer;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!timer)
|
|
|
|
return 0;
|
|
|
|
|
2005-10-31 07:03:39 +08:00
|
|
|
hpet = hpetp->hp_hpet;
|
2005-04-17 06:20:36 +08:00
|
|
|
t = read_counter(&timer->hpet_compare);
|
|
|
|
|
|
|
|
i = 0;
|
2005-10-31 07:03:31 +08:00
|
|
|
count = hpet_time_div(hpetp, TICK_CALIBRATE);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
|
|
|
|
start = read_counter(&hpet->hpet_mc);
|
|
|
|
|
|
|
|
do {
|
|
|
|
m = read_counter(&hpet->hpet_mc);
|
|
|
|
write_counter(t + m + hpetp->hp_delta, &timer->hpet_compare);
|
|
|
|
} while (i++, (m - start) < count);
|
|
|
|
|
|
|
|
local_irq_restore(flags);
|
|
|
|
|
|
|
|
return (m - start) / i;
|
|
|
|
}
|
|
|
|
|
2009-04-03 07:58:31 +08:00
|
|
|
static unsigned long hpet_calibrate(struct hpets *hpetp)
|
|
|
|
{
|
|
|
|
unsigned long ret = -1;
|
|
|
|
unsigned long tmp;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Try to calibrate until return value becomes stable small value.
|
|
|
|
* If SMI interruption occurs in calibration loop, the return value
|
|
|
|
* will be big. This avoids its impact.
|
|
|
|
*/
|
|
|
|
for ( ; ; ) {
|
|
|
|
tmp = __hpet_calibrate(hpetp);
|
|
|
|
if (ret <= tmp)
|
|
|
|
break;
|
|
|
|
ret = tmp;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
int hpet_alloc(struct hpet_data *hdp)
|
|
|
|
{
|
2008-04-04 22:26:10 +08:00
|
|
|
u64 cap, mcfg;
|
2005-04-17 06:20:36 +08:00
|
|
|
struct hpet_dev *devp;
|
2008-04-04 22:26:10 +08:00
|
|
|
u32 i, ntimer;
|
2005-04-17 06:20:36 +08:00
|
|
|
struct hpets *hpetp;
|
|
|
|
size_t siz;
|
|
|
|
struct hpet __iomem *hpet;
|
2005-10-31 07:03:44 +08:00
|
|
|
static struct hpets *last = NULL;
|
2008-04-04 22:26:10 +08:00
|
|
|
unsigned long period;
|
2005-10-31 07:03:31 +08:00
|
|
|
unsigned long long temp;
|
2008-08-01 03:59:56 +08:00
|
|
|
u32 remainder;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* hpet_alloc can be called by platform dependent code.
|
2005-10-31 07:03:44 +08:00
|
|
|
* If platform dependent code has allocated the hpet that
|
|
|
|
* ACPI has also reported, then we catch it here.
|
2005-04-17 06:20:36 +08:00
|
|
|
*/
|
2005-10-31 07:03:44 +08:00
|
|
|
if (hpet_is_known(hdp)) {
|
|
|
|
printk(KERN_DEBUG "%s: duplicate HPET ignored\n",
|
2008-04-30 15:55:10 +08:00
|
|
|
__func__);
|
2005-10-31 07:03:44 +08:00
|
|
|
return 0;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
siz = sizeof(struct hpets) + ((hdp->hd_nirqs - 1) *
|
|
|
|
sizeof(struct hpet_dev));
|
|
|
|
|
2005-10-31 07:03:44 +08:00
|
|
|
hpetp = kzalloc(siz, GFP_KERNEL);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
if (!hpetp)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
hpetp->hp_which = hpet_nhpet++;
|
|
|
|
hpetp->hp_hpet = hdp->hd_address;
|
|
|
|
hpetp->hp_hpet_phys = hdp->hd_phys_address;
|
|
|
|
|
|
|
|
hpetp->hp_ntimer = hdp->hd_nirqs;
|
2008-01-30 20:30:03 +08:00
|
|
|
|
2008-04-04 22:26:10 +08:00
|
|
|
for (i = 0; i < hdp->hd_nirqs; i++)
|
|
|
|
hpetp->hp_dev[i].hd_hdwirq = hdp->hd_irq[i];
|
2008-01-30 20:30:03 +08:00
|
|
|
|
2008-04-04 22:26:10 +08:00
|
|
|
hpet = hpetp->hp_hpet;
|
2008-01-30 20:30:03 +08:00
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
cap = readq(&hpet->hpet_cap);
|
|
|
|
|
|
|
|
ntimer = ((cap & HPET_NUM_TIM_CAP_MASK) >> HPET_NUM_TIM_CAP_SHIFT) + 1;
|
|
|
|
|
|
|
|
if (hpetp->hp_ntimer != ntimer) {
|
|
|
|
printk(KERN_WARNING "hpet: number irqs doesn't agree"
|
|
|
|
" with number of timers\n");
|
|
|
|
kfree(hpetp);
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (last)
|
|
|
|
last->hp_next = hpetp;
|
|
|
|
else
|
|
|
|
hpets = hpetp;
|
|
|
|
|
|
|
|
last = hpetp;
|
|
|
|
|
2005-10-31 07:03:31 +08:00
|
|
|
period = (cap & HPET_COUNTER_CLK_PERIOD_MASK) >>
|
|
|
|
HPET_COUNTER_CLK_PERIOD_SHIFT; /* fs, 10^-15 */
|
|
|
|
temp = 1000000000000000uLL; /* 10^15 femtoseconds per second */
|
|
|
|
temp += period >> 1; /* round */
|
|
|
|
do_div(temp, period);
|
|
|
|
hpetp->hp_tick_freq = temp; /* ticks per second */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2006-09-26 16:52:28 +08:00
|
|
|
printk(KERN_INFO "hpet%d: at MMIO 0x%lx, IRQ%s",
|
|
|
|
hpetp->hp_which, hdp->hd_phys_address,
|
2005-04-17 06:20:36 +08:00
|
|
|
hpetp->hp_ntimer > 1 ? "s" : "");
|
|
|
|
for (i = 0; i < hpetp->hp_ntimer; i++)
|
2008-04-04 22:26:10 +08:00
|
|
|
printk("%s %d", i > 0 ? "," : "", hdp->hd_irq[i]);
|
2005-04-17 06:20:36 +08:00
|
|
|
printk("\n");
|
|
|
|
|
2008-08-01 03:59:56 +08:00
|
|
|
temp = hpetp->hp_tick_freq;
|
|
|
|
remainder = do_div(temp, 1000000);
|
2008-07-30 03:47:38 +08:00
|
|
|
printk(KERN_INFO
|
|
|
|
"hpet%u: %u comparators, %d-bit %u.%06u MHz counter\n",
|
|
|
|
hpetp->hp_which, hpetp->hp_ntimer,
|
|
|
|
cap & HPET_COUNTER_SIZE_MASK ? 64 : 32,
|
2008-08-01 03:59:56 +08:00
|
|
|
(unsigned) temp, remainder);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
mcfg = readq(&hpet->hpet_config);
|
|
|
|
if ((mcfg & HPET_ENABLE_CNF_MASK) == 0) {
|
|
|
|
write_counter(0L, &hpet->hpet_mc);
|
|
|
|
mcfg |= HPET_ENABLE_CNF_MASK;
|
|
|
|
writeq(mcfg, &hpet->hpet_config);
|
|
|
|
}
|
|
|
|
|
2005-10-31 07:03:31 +08:00
|
|
|
for (i = 0, devp = hpetp->hp_dev; i < hpetp->hp_ntimer; i++, devp++) {
|
2005-04-17 06:20:36 +08:00
|
|
|
struct hpet_timer __iomem *timer;
|
|
|
|
|
|
|
|
timer = &hpet->hpet_timers[devp - hpetp->hp_dev];
|
|
|
|
|
|
|
|
devp->hd_hpets = hpetp;
|
|
|
|
devp->hd_hpet = hpet;
|
|
|
|
devp->hd_timer = timer;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If the timer was reserved by platform code,
|
|
|
|
* then make timer unavailable for opens.
|
|
|
|
*/
|
|
|
|
if (hdp->hd_state & (1 << i)) {
|
|
|
|
devp->hd_flags = HPET_OPEN;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
init_waitqueue_head(&devp->hd_waitqueue);
|
|
|
|
}
|
|
|
|
|
|
|
|
hpetp->hp_delta = hpet_calibrate(hpetp);
|
2007-07-21 02:22:30 +08:00
|
|
|
|
2007-09-01 11:13:57 +08:00
|
|
|
/* This clocksource driver currently only works on ia64 */
|
|
|
|
#ifdef CONFIG_IA64
|
2007-07-21 02:22:30 +08:00
|
|
|
if (!hpet_clocksource) {
|
|
|
|
hpet_mctr = (void __iomem *)&hpetp->hp_hpet->hpet_mc;
|
|
|
|
CLKSRC_FSYS_MMIO_SET(clocksource_hpet.fsys_mmio, hpet_mctr);
|
|
|
|
clocksource_hpet.mult = clocksource_hz2mult(hpetp->hp_tick_freq,
|
|
|
|
clocksource_hpet.shift);
|
|
|
|
clocksource_register(&clocksource_hpet);
|
|
|
|
hpetp->hp_clocksource = &clocksource_hpet;
|
|
|
|
hpet_clocksource = &clocksource_hpet;
|
|
|
|
}
|
2007-09-01 11:13:57 +08:00
|
|
|
#endif
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static acpi_status hpet_resources(struct acpi_resource *res, void *data)
|
|
|
|
{
|
|
|
|
struct hpet_data *hdp;
|
|
|
|
acpi_status status;
|
|
|
|
struct acpi_resource_address64 addr;
|
|
|
|
|
|
|
|
hdp = data;
|
|
|
|
|
|
|
|
status = acpi_resource_to_address64(res, &addr);
|
|
|
|
|
|
|
|
if (ACPI_SUCCESS(status)) {
|
[ACPI] ACPICA 20050930
Completed a major overhaul of the Resource Manager code -
specifically, optimizations in the area of the AML/internal
resource conversion code. The code has been optimized to
simplify and eliminate duplicated code, CPU stack use has
been decreased by optimizing function parameters and local
variables, and naming conventions across the manager have
been standardized for clarity and ease of maintenance (this
includes function, parameter, variable, and struct/typedef
names.)
All Resource Manager dispatch and information tables have
been moved to a single location for clarity and ease of
maintenance. One new file was created, named "rsinfo.c".
The ACPI return macros (return_ACPI_STATUS, etc.) have
been modified to guarantee that the argument is
not evaluated twice, making them less prone to macro
side-effects. However, since there exists the possibility
of additional stack use if a particular compiler cannot
optimize them (such as in the debug generation case),
the original macros are optionally available. Note that
some invocations of the return_VALUE macro may now cause
size mismatch warnings; the return_UINT8 and return_UINT32
macros are provided to eliminate these. (From Randy Dunlap)
Implemented a new mechanism to enable debug tracing for
individual control methods. A new external interface,
acpi_debug_trace(), is provided to enable this mechanism. The
intent is to allow the host OS to easily enable and disable
tracing for problematic control methods. This interface
can be easily exposed to a user or debugger interface if
desired. See the file psxface.c for details.
acpi_ut_callocate() will now return a valid pointer if a
length of zero is specified - a length of one is used
and a warning is issued. This matches the behavior of
acpi_ut_allocate().
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-10-01 07:03:00 +08:00
|
|
|
hdp->hd_phys_address = addr.minimum;
|
2006-03-29 06:04:00 +08:00
|
|
|
hdp->hd_address = ioremap(addr.minimum, addr.address_length);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2005-10-31 07:03:44 +08:00
|
|
|
if (hpet_is_known(hdp)) {
|
|
|
|
iounmap(hdp->hd_address);
|
2007-09-21 09:23:13 +08:00
|
|
|
return AE_ALREADY_EXISTS;
|
2005-10-31 07:03:44 +08:00
|
|
|
}
|
[ACPI] ACPICA 20050930
Completed a major overhaul of the Resource Manager code -
specifically, optimizations in the area of the AML/internal
resource conversion code. The code has been optimized to
simplify and eliminate duplicated code, CPU stack use has
been decreased by optimizing function parameters and local
variables, and naming conventions across the manager have
been standardized for clarity and ease of maintenance (this
includes function, parameter, variable, and struct/typedef
names.)
All Resource Manager dispatch and information tables have
been moved to a single location for clarity and ease of
maintenance. One new file was created, named "rsinfo.c".
The ACPI return macros (return_ACPI_STATUS, etc.) have
been modified to guarantee that the argument is
not evaluated twice, making them less prone to macro
side-effects. However, since there exists the possibility
of additional stack use if a particular compiler cannot
optimize them (such as in the debug generation case),
the original macros are optionally available. Note that
some invocations of the return_VALUE macro may now cause
size mismatch warnings; the return_UINT8 and return_UINT32
macros are provided to eliminate these. (From Randy Dunlap)
Implemented a new mechanism to enable debug tracing for
individual control methods. A new external interface,
acpi_debug_trace(), is provided to enable this mechanism. The
intent is to allow the host OS to easily enable and disable
tracing for problematic control methods. This interface
can be easily exposed to a user or debugger interface if
desired. See the file psxface.c for details.
acpi_ut_callocate() will now return a valid pointer if a
length of zero is specified - a length of one is used
and a warning is issued. This matches the behavior of
acpi_ut_allocate().
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-10-01 07:03:00 +08:00
|
|
|
} else if (res->type == ACPI_RESOURCE_TYPE_FIXED_MEMORY32) {
|
|
|
|
struct acpi_resource_fixed_memory32 *fixmem32;
|
2005-10-31 07:03:42 +08:00
|
|
|
|
|
|
|
fixmem32 = &res->data.fixed_memory32;
|
|
|
|
if (!fixmem32)
|
2007-09-21 09:23:13 +08:00
|
|
|
return AE_NO_MEMORY;
|
2005-10-31 07:03:42 +08:00
|
|
|
|
[ACPI] ACPICA 20050930
Completed a major overhaul of the Resource Manager code -
specifically, optimizations in the area of the AML/internal
resource conversion code. The code has been optimized to
simplify and eliminate duplicated code, CPU stack use has
been decreased by optimizing function parameters and local
variables, and naming conventions across the manager have
been standardized for clarity and ease of maintenance (this
includes function, parameter, variable, and struct/typedef
names.)
All Resource Manager dispatch and information tables have
been moved to a single location for clarity and ease of
maintenance. One new file was created, named "rsinfo.c".
The ACPI return macros (return_ACPI_STATUS, etc.) have
been modified to guarantee that the argument is
not evaluated twice, making them less prone to macro
side-effects. However, since there exists the possibility
of additional stack use if a particular compiler cannot
optimize them (such as in the debug generation case),
the original macros are optionally available. Note that
some invocations of the return_VALUE macro may now cause
size mismatch warnings; the return_UINT8 and return_UINT32
macros are provided to eliminate these. (From Randy Dunlap)
Implemented a new mechanism to enable debug tracing for
individual control methods. A new external interface,
acpi_debug_trace(), is provided to enable this mechanism. The
intent is to allow the host OS to easily enable and disable
tracing for problematic control methods. This interface
can be easily exposed to a user or debugger interface if
desired. See the file psxface.c for details.
acpi_ut_callocate() will now return a valid pointer if a
length of zero is specified - a length of one is used
and a warning is issued. This matches the behavior of
acpi_ut_allocate().
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-10-01 07:03:00 +08:00
|
|
|
hdp->hd_phys_address = fixmem32->address;
|
|
|
|
hdp->hd_address = ioremap(fixmem32->address,
|
2005-10-31 07:03:42 +08:00
|
|
|
HPET_RANGE_SIZE);
|
|
|
|
|
2005-10-31 07:03:44 +08:00
|
|
|
if (hpet_is_known(hdp)) {
|
|
|
|
iounmap(hdp->hd_address);
|
2007-09-21 09:23:13 +08:00
|
|
|
return AE_ALREADY_EXISTS;
|
2005-10-31 07:03:44 +08:00
|
|
|
}
|
[ACPI] ACPICA 20050930
Completed a major overhaul of the Resource Manager code -
specifically, optimizations in the area of the AML/internal
resource conversion code. The code has been optimized to
simplify and eliminate duplicated code, CPU stack use has
been decreased by optimizing function parameters and local
variables, and naming conventions across the manager have
been standardized for clarity and ease of maintenance (this
includes function, parameter, variable, and struct/typedef
names.)
All Resource Manager dispatch and information tables have
been moved to a single location for clarity and ease of
maintenance. One new file was created, named "rsinfo.c".
The ACPI return macros (return_ACPI_STATUS, etc.) have
been modified to guarantee that the argument is
not evaluated twice, making them less prone to macro
side-effects. However, since there exists the possibility
of additional stack use if a particular compiler cannot
optimize them (such as in the debug generation case),
the original macros are optionally available. Note that
some invocations of the return_VALUE macro may now cause
size mismatch warnings; the return_UINT8 and return_UINT32
macros are provided to eliminate these. (From Randy Dunlap)
Implemented a new mechanism to enable debug tracing for
individual control methods. A new external interface,
acpi_debug_trace(), is provided to enable this mechanism. The
intent is to allow the host OS to easily enable and disable
tracing for problematic control methods. This interface
can be easily exposed to a user or debugger interface if
desired. See the file psxface.c for details.
acpi_ut_callocate() will now return a valid pointer if a
length of zero is specified - a length of one is used
and a warning is issued. This matches the behavior of
acpi_ut_allocate().
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-10-01 07:03:00 +08:00
|
|
|
} else if (res->type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ) {
|
|
|
|
struct acpi_resource_extended_irq *irqp;
|
2006-02-15 05:53:02 +08:00
|
|
|
int i, irq;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
irqp = &res->data.extended_irq;
|
|
|
|
|
2006-02-15 05:53:02 +08:00
|
|
|
for (i = 0; i < irqp->interrupt_count; i++) {
|
2009-04-28 09:01:20 +08:00
|
|
|
irq = acpi_register_gsi(NULL, irqp->interrupts[i],
|
2006-02-15 05:53:02 +08:00
|
|
|
irqp->triggering, irqp->polarity);
|
|
|
|
if (irq < 0)
|
|
|
|
return AE_ERROR;
|
|
|
|
|
|
|
|
hdp->hd_irq[hdp->hd_nirqs] = irq;
|
|
|
|
hdp->hd_nirqs++;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return AE_OK;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int hpet_acpi_add(struct acpi_device *device)
|
|
|
|
{
|
|
|
|
acpi_status result;
|
|
|
|
struct hpet_data data;
|
|
|
|
|
|
|
|
memset(&data, 0, sizeof(data));
|
|
|
|
|
|
|
|
result =
|
|
|
|
acpi_walk_resources(device->handle, METHOD_NAME__CRS,
|
|
|
|
hpet_resources, &data);
|
|
|
|
|
|
|
|
if (ACPI_FAILURE(result))
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
if (!data.hd_address || !data.hd_nirqs) {
|
2008-04-30 15:55:10 +08:00
|
|
|
printk("%s: no address or irqs in _CRS\n", __func__);
|
2005-04-17 06:20:36 +08:00
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
return hpet_alloc(&data);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int hpet_acpi_remove(struct acpi_device *device, int type)
|
|
|
|
{
|
2007-07-21 02:22:30 +08:00
|
|
|
/* XXX need to unregister clocksource, dealloc mem, etc */
|
2005-04-17 06:20:36 +08:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2007-07-23 20:44:41 +08:00
|
|
|
static const struct acpi_device_id hpet_device_ids[] = {
|
|
|
|
{"PNP0103", 0},
|
|
|
|
{"", 0},
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(acpi, hpet_device_ids);
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
static struct acpi_driver hpet_acpi_driver = {
|
|
|
|
.name = "hpet",
|
2007-07-23 20:44:41 +08:00
|
|
|
.ids = hpet_device_ids,
|
2005-04-17 06:20:36 +08:00
|
|
|
.ops = {
|
|
|
|
.add = hpet_acpi_add,
|
|
|
|
.remove = hpet_acpi_remove,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct miscdevice hpet_misc = { HPET_MINOR, "hpet", &hpet_fops };
|
|
|
|
|
|
|
|
static int __init hpet_init(void)
|
|
|
|
{
|
|
|
|
int result;
|
|
|
|
|
|
|
|
result = misc_register(&hpet_misc);
|
|
|
|
if (result < 0)
|
|
|
|
return -ENODEV;
|
|
|
|
|
2007-02-14 16:34:09 +08:00
|
|
|
sysctl_header = register_sysctl_table(dev_root);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
result = acpi_bus_register_driver(&hpet_acpi_driver);
|
|
|
|
if (result < 0) {
|
|
|
|
if (sysctl_header)
|
|
|
|
unregister_sysctl_table(sysctl_header);
|
|
|
|
misc_deregister(&hpet_misc);
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit hpet_exit(void)
|
|
|
|
{
|
|
|
|
acpi_bus_unregister_driver(&hpet_acpi_driver);
|
|
|
|
|
|
|
|
if (sysctl_header)
|
|
|
|
unregister_sysctl_table(sysctl_header);
|
|
|
|
misc_deregister(&hpet_misc);
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(hpet_init);
|
|
|
|
module_exit(hpet_exit);
|
|
|
|
MODULE_AUTHOR("Bob Picco <Robert.Picco@hp.com>");
|
|
|
|
MODULE_LICENSE("GPL");
|