OpenCloudOS-Kernel/drivers/net/wireless/adm8211.c

2007 lines
54 KiB
C
Raw Normal View History

/*
* Linux device driver for ADMtek ADM8211 (IEEE 802.11b MAC/BBP)
*
* Copyright (c) 2003, Jouni Malinen <j@w1.fi>
* Copyright (c) 2004-2007, Michael Wu <flamingice@sourmilk.net>
* Some parts copyright (c) 2003 by David Young <dyoung@pobox.com>
* and used with permission.
*
* Much thanks to Infineon-ADMtek for their support of this driver.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation. See README and COPYING for
* more details.
*/
#include <linux/init.h>
#include <linux/if.h>
#include <linux/skbuff.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/etherdevice.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/crc32.h>
#include <linux/eeprom_93cx6.h>
#include <net/mac80211.h>
#include "adm8211.h"
MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
MODULE_AUTHOR("Jouni Malinen <j@w1.fi>");
MODULE_DESCRIPTION("Driver for IEEE 802.11b wireless cards based on ADMtek ADM8211");
MODULE_SUPPORTED_DEVICE("ADM8211");
MODULE_LICENSE("GPL");
static unsigned int tx_ring_size __read_mostly = 16;
static unsigned int rx_ring_size __read_mostly = 16;
module_param(tx_ring_size, uint, 0);
module_param(rx_ring_size, uint, 0);
static DEFINE_PCI_DEVICE_TABLE(adm8211_pci_id_table) = {
/* ADMtek ADM8211 */
{ PCI_DEVICE(0x10B7, 0x6000) }, /* 3Com 3CRSHPW796 */
{ PCI_DEVICE(0x1200, 0x8201) }, /* ? */
{ PCI_DEVICE(0x1317, 0x8201) }, /* ADM8211A */
{ PCI_DEVICE(0x1317, 0x8211) }, /* ADM8211B/C */
{ 0 }
};
static struct ieee80211_rate adm8211_rates[] = {
{ .bitrate = 10, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
{ .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
{ .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
{ .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
{ .bitrate = 220, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, /* XX ?? */
};
static const struct ieee80211_channel adm8211_channels[] = {
{ .center_freq = 2412},
{ .center_freq = 2417},
{ .center_freq = 2422},
{ .center_freq = 2427},
{ .center_freq = 2432},
{ .center_freq = 2437},
{ .center_freq = 2442},
{ .center_freq = 2447},
{ .center_freq = 2452},
{ .center_freq = 2457},
{ .center_freq = 2462},
{ .center_freq = 2467},
{ .center_freq = 2472},
{ .center_freq = 2484},
};
static void adm8211_eeprom_register_read(struct eeprom_93cx6 *eeprom)
{
struct adm8211_priv *priv = eeprom->data;
u32 reg = ADM8211_CSR_READ(SPR);
eeprom->reg_data_in = reg & ADM8211_SPR_SDI;
eeprom->reg_data_out = reg & ADM8211_SPR_SDO;
eeprom->reg_data_clock = reg & ADM8211_SPR_SCLK;
eeprom->reg_chip_select = reg & ADM8211_SPR_SCS;
}
static void adm8211_eeprom_register_write(struct eeprom_93cx6 *eeprom)
{
struct adm8211_priv *priv = eeprom->data;
u32 reg = 0x4000 | ADM8211_SPR_SRS;
if (eeprom->reg_data_in)
reg |= ADM8211_SPR_SDI;
if (eeprom->reg_data_out)
reg |= ADM8211_SPR_SDO;
if (eeprom->reg_data_clock)
reg |= ADM8211_SPR_SCLK;
if (eeprom->reg_chip_select)
reg |= ADM8211_SPR_SCS;
ADM8211_CSR_WRITE(SPR, reg);
ADM8211_CSR_READ(SPR); /* eeprom_delay */
}
static int adm8211_read_eeprom(struct ieee80211_hw *dev)
{
struct adm8211_priv *priv = dev->priv;
unsigned int words, i;
struct ieee80211_chan_range chan_range;
u16 cr49;
struct eeprom_93cx6 eeprom = {
.data = priv,
.register_read = adm8211_eeprom_register_read,
.register_write = adm8211_eeprom_register_write
};
if (ADM8211_CSR_READ(CSR_TEST0) & ADM8211_CSR_TEST0_EPTYP) {
/* 256 * 16-bit = 512 bytes */
eeprom.width = PCI_EEPROM_WIDTH_93C66;
words = 256;
} else {
/* 64 * 16-bit = 128 bytes */
eeprom.width = PCI_EEPROM_WIDTH_93C46;
words = 64;
}
priv->eeprom_len = words * 2;
priv->eeprom = kmalloc(priv->eeprom_len, GFP_KERNEL);
if (!priv->eeprom)
return -ENOMEM;
eeprom_93cx6_multiread(&eeprom, 0, (__le16 *)priv->eeprom, words);
cr49 = le16_to_cpu(priv->eeprom->cr49);
priv->rf_type = (cr49 >> 3) & 0x7;
switch (priv->rf_type) {
case ADM8211_TYPE_INTERSIL:
case ADM8211_TYPE_RFMD:
case ADM8211_TYPE_MARVEL:
case ADM8211_TYPE_AIROHA:
case ADM8211_TYPE_ADMTEK:
break;
default:
if (priv->pdev->revision < ADM8211_REV_CA)
priv->rf_type = ADM8211_TYPE_RFMD;
else
priv->rf_type = ADM8211_TYPE_AIROHA;
printk(KERN_WARNING "%s (adm8211): Unknown RFtype %d\n",
pci_name(priv->pdev), (cr49 >> 3) & 0x7);
}
priv->bbp_type = cr49 & 0x7;
switch (priv->bbp_type) {
case ADM8211_TYPE_INTERSIL:
case ADM8211_TYPE_RFMD:
case ADM8211_TYPE_MARVEL:
case ADM8211_TYPE_AIROHA:
case ADM8211_TYPE_ADMTEK:
break;
default:
if (priv->pdev->revision < ADM8211_REV_CA)
priv->bbp_type = ADM8211_TYPE_RFMD;
else
priv->bbp_type = ADM8211_TYPE_ADMTEK;
printk(KERN_WARNING "%s (adm8211): Unknown BBPtype: %d\n",
pci_name(priv->pdev), cr49 >> 3);
}
if (priv->eeprom->country_code >= ARRAY_SIZE(cranges)) {
printk(KERN_WARNING "%s (adm8211): Invalid country code (%d)\n",
pci_name(priv->pdev), priv->eeprom->country_code);
chan_range = cranges[2];
} else
chan_range = cranges[priv->eeprom->country_code];
printk(KERN_DEBUG "%s (adm8211): Channel range: %d - %d\n",
pci_name(priv->pdev), (int)chan_range.min, (int)chan_range.max);
BUILD_BUG_ON(sizeof(priv->channels) != sizeof(adm8211_channels));
memcpy(priv->channels, adm8211_channels, sizeof(priv->channels));
priv->band.channels = priv->channels;
priv->band.n_channels = ARRAY_SIZE(adm8211_channels);
priv->band.bitrates = adm8211_rates;
priv->band.n_bitrates = ARRAY_SIZE(adm8211_rates);
for (i = 1; i <= ARRAY_SIZE(adm8211_channels); i++)
if (i < chan_range.min || i > chan_range.max)
priv->channels[i - 1].flags |= IEEE80211_CHAN_DISABLED;
switch (priv->eeprom->specific_bbptype) {
case ADM8211_BBP_RFMD3000:
case ADM8211_BBP_RFMD3002:
case ADM8211_BBP_ADM8011:
priv->specific_bbptype = priv->eeprom->specific_bbptype;
break;
default:
if (priv->pdev->revision < ADM8211_REV_CA)
priv->specific_bbptype = ADM8211_BBP_RFMD3000;
else
priv->specific_bbptype = ADM8211_BBP_ADM8011;
printk(KERN_WARNING "%s (adm8211): Unknown specific BBP: %d\n",
pci_name(priv->pdev), priv->eeprom->specific_bbptype);
}
switch (priv->eeprom->specific_rftype) {
case ADM8211_RFMD2948:
case ADM8211_RFMD2958:
case ADM8211_RFMD2958_RF3000_CONTROL_POWER:
case ADM8211_MAX2820:
case ADM8211_AL2210L:
priv->transceiver_type = priv->eeprom->specific_rftype;
break;
default:
if (priv->pdev->revision == ADM8211_REV_BA)
priv->transceiver_type = ADM8211_RFMD2958_RF3000_CONTROL_POWER;
else if (priv->pdev->revision == ADM8211_REV_CA)
priv->transceiver_type = ADM8211_AL2210L;
else if (priv->pdev->revision == ADM8211_REV_AB)
priv->transceiver_type = ADM8211_RFMD2948;
printk(KERN_WARNING "%s (adm8211): Unknown transceiver: %d\n",
pci_name(priv->pdev), priv->eeprom->specific_rftype);
break;
}
printk(KERN_DEBUG "%s (adm8211): RFtype=%d BBPtype=%d Specific BBP=%d "
"Transceiver=%d\n", pci_name(priv->pdev), priv->rf_type,
priv->bbp_type, priv->specific_bbptype, priv->transceiver_type);
return 0;
}
static inline void adm8211_write_sram(struct ieee80211_hw *dev,
u32 addr, u32 data)
{
struct adm8211_priv *priv = dev->priv;
ADM8211_CSR_WRITE(WEPCTL, addr | ADM8211_WEPCTL_TABLE_WR |
(priv->pdev->revision < ADM8211_REV_BA ?
0 : ADM8211_WEPCTL_SEL_WEPTABLE ));
ADM8211_CSR_READ(WEPCTL);
msleep(1);
ADM8211_CSR_WRITE(WESK, data);
ADM8211_CSR_READ(WESK);
msleep(1);
}
static void adm8211_write_sram_bytes(struct ieee80211_hw *dev,
unsigned int addr, u8 *buf,
unsigned int len)
{
struct adm8211_priv *priv = dev->priv;
u32 reg = ADM8211_CSR_READ(WEPCTL);
unsigned int i;
if (priv->pdev->revision < ADM8211_REV_BA) {
for (i = 0; i < len; i += 2) {
u16 val = buf[i] | (buf[i + 1] << 8);
adm8211_write_sram(dev, addr + i / 2, val);
}
} else {
for (i = 0; i < len; i += 4) {
u32 val = (buf[i + 0] << 0 ) | (buf[i + 1] << 8 ) |
(buf[i + 2] << 16) | (buf[i + 3] << 24);
adm8211_write_sram(dev, addr + i / 4, val);
}
}
ADM8211_CSR_WRITE(WEPCTL, reg);
}
static void adm8211_clear_sram(struct ieee80211_hw *dev)
{
struct adm8211_priv *priv = dev->priv;
u32 reg = ADM8211_CSR_READ(WEPCTL);
unsigned int addr;
for (addr = 0; addr < ADM8211_SRAM_SIZE; addr++)
adm8211_write_sram(dev, addr, 0);
ADM8211_CSR_WRITE(WEPCTL, reg);
}
static int adm8211_get_stats(struct ieee80211_hw *dev,
struct ieee80211_low_level_stats *stats)
{
struct adm8211_priv *priv = dev->priv;
memcpy(stats, &priv->stats, sizeof(*stats));
return 0;
}
static void adm8211_interrupt_tci(struct ieee80211_hw *dev)
{
struct adm8211_priv *priv = dev->priv;
unsigned int dirty_tx;
spin_lock(&priv->lock);
for (dirty_tx = priv->dirty_tx; priv->cur_tx - dirty_tx; dirty_tx++) {
unsigned int entry = dirty_tx % priv->tx_ring_size;
u32 status = le32_to_cpu(priv->tx_ring[entry].status);
struct ieee80211_tx_info *txi;
struct adm8211_tx_ring_info *info;
struct sk_buff *skb;
if (status & TDES0_CONTROL_OWN ||
!(status & TDES0_CONTROL_DONE))
break;
info = &priv->tx_buffers[entry];
skb = info->skb;
txi = IEEE80211_SKB_CB(skb);
/* TODO: check TDES0_STATUS_TUF and TDES0_STATUS_TRO */
pci_unmap_single(priv->pdev, info->mapping,
info->skb->len, PCI_DMA_TODEVICE);
ieee80211_tx_info_clear_status(txi);
skb_pull(skb, sizeof(struct adm8211_tx_hdr));
memcpy(skb_push(skb, info->hdrlen), skb->cb, info->hdrlen);
if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK) &&
!(status & TDES0_STATUS_ES))
txi->flags |= IEEE80211_TX_STAT_ACK;
ieee80211_tx_status_irqsafe(dev, skb);
info->skb = NULL;
}
if (priv->cur_tx - dirty_tx < priv->tx_ring_size - 2)
ieee80211_wake_queue(dev, 0);
priv->dirty_tx = dirty_tx;
spin_unlock(&priv->lock);
}
static void adm8211_interrupt_rci(struct ieee80211_hw *dev)
{
struct adm8211_priv *priv = dev->priv;
unsigned int entry = priv->cur_rx % priv->rx_ring_size;
u32 status;
unsigned int pktlen;
struct sk_buff *skb, *newskb;
unsigned int limit = priv->rx_ring_size;
u8 rssi, rate;
while (!(priv->rx_ring[entry].status & cpu_to_le32(RDES0_STATUS_OWN))) {
if (!limit--)
break;
status = le32_to_cpu(priv->rx_ring[entry].status);
rate = (status & RDES0_STATUS_RXDR) >> 12;
rssi = le32_to_cpu(priv->rx_ring[entry].length) &
RDES1_STATUS_RSSI;
pktlen = status & RDES0_STATUS_FL;
if (pktlen > RX_PKT_SIZE) {
if (net_ratelimit())
wiphy_debug(dev->wiphy, "frame too long (%d)\n",
pktlen);
pktlen = RX_PKT_SIZE;
}
if (!priv->soft_rx_crc && status & RDES0_STATUS_ES) {
skb = NULL; /* old buffer will be reused */
/* TODO: update RX error stats */
/* TODO: check RDES0_STATUS_CRC*E */
} else if (pktlen < RX_COPY_BREAK) {
skb = dev_alloc_skb(pktlen);
if (skb) {
pci_dma_sync_single_for_cpu(
priv->pdev,
priv->rx_buffers[entry].mapping,
pktlen, PCI_DMA_FROMDEVICE);
memcpy(skb_put(skb, pktlen),
skb_tail_pointer(priv->rx_buffers[entry].skb),
pktlen);
pci_dma_sync_single_for_device(
priv->pdev,
priv->rx_buffers[entry].mapping,
RX_PKT_SIZE, PCI_DMA_FROMDEVICE);
}
} else {
newskb = dev_alloc_skb(RX_PKT_SIZE);
if (newskb) {
skb = priv->rx_buffers[entry].skb;
skb_put(skb, pktlen);
pci_unmap_single(
priv->pdev,
priv->rx_buffers[entry].mapping,
RX_PKT_SIZE, PCI_DMA_FROMDEVICE);
priv->rx_buffers[entry].skb = newskb;
priv->rx_buffers[entry].mapping =
pci_map_single(priv->pdev,
skb_tail_pointer(newskb),
RX_PKT_SIZE,
PCI_DMA_FROMDEVICE);
} else {
skb = NULL;
/* TODO: update rx dropped stats */
}
priv->rx_ring[entry].buffer1 =
cpu_to_le32(priv->rx_buffers[entry].mapping);
}
priv->rx_ring[entry].status = cpu_to_le32(RDES0_STATUS_OWN |
RDES0_STATUS_SQL);
priv->rx_ring[entry].length =
cpu_to_le32(RX_PKT_SIZE |
(entry == priv->rx_ring_size - 1 ?
RDES1_CONTROL_RER : 0));
if (skb) {
struct ieee80211_rx_status rx_status = {0};
if (priv->pdev->revision < ADM8211_REV_CA)
mac80211: use hardware flags for signal/noise units trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-09 01:15:40 +08:00
rx_status.signal = rssi;
else
mac80211: use hardware flags for signal/noise units trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-09 01:15:40 +08:00
rx_status.signal = 100 - rssi;
rx_status.rate_idx = rate;
rx_status.freq = adm8211_channels[priv->channel - 1].center_freq;
rx_status.band = IEEE80211_BAND_2GHZ;
memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
ieee80211_rx_irqsafe(dev, skb);
}
entry = (++priv->cur_rx) % priv->rx_ring_size;
}
/* TODO: check LPC and update stats? */
}
static irqreturn_t adm8211_interrupt(int irq, void *dev_id)
{
#define ADM8211_INT(x) \
do { \
if (unlikely(stsr & ADM8211_STSR_ ## x)) \
wiphy_debug(dev->wiphy, "%s\n", #x); \
} while (0)
struct ieee80211_hw *dev = dev_id;
struct adm8211_priv *priv = dev->priv;
u32 stsr = ADM8211_CSR_READ(STSR);
ADM8211_CSR_WRITE(STSR, stsr);
if (stsr == 0xffffffff)
return IRQ_HANDLED;
if (!(stsr & (ADM8211_STSR_NISS | ADM8211_STSR_AISS)))
return IRQ_HANDLED;
if (stsr & ADM8211_STSR_RCI)
adm8211_interrupt_rci(dev);
if (stsr & ADM8211_STSR_TCI)
adm8211_interrupt_tci(dev);
ADM8211_INT(PCF);
ADM8211_INT(BCNTC);
ADM8211_INT(GPINT);
ADM8211_INT(ATIMTC);
ADM8211_INT(TSFTF);
ADM8211_INT(TSCZ);
ADM8211_INT(SQL);
ADM8211_INT(WEPTD);
ADM8211_INT(ATIME);
ADM8211_INT(TEIS);
ADM8211_INT(FBE);
ADM8211_INT(REIS);
ADM8211_INT(GPTT);
ADM8211_INT(RPS);
ADM8211_INT(RDU);
ADM8211_INT(TUF);
ADM8211_INT(TPS);
return IRQ_HANDLED;
#undef ADM8211_INT
}
#define WRITE_SYN(name,v_mask,v_shift,a_mask,a_shift,bits,prewrite,postwrite)\
static void adm8211_rf_write_syn_ ## name (struct ieee80211_hw *dev, \
u16 addr, u32 value) { \
struct adm8211_priv *priv = dev->priv; \
unsigned int i; \
u32 reg, bitbuf; \
\
value &= v_mask; \
addr &= a_mask; \
bitbuf = (value << v_shift) | (addr << a_shift); \
\
ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_IF_SELECT_1); \
ADM8211_CSR_READ(SYNRF); \
ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_IF_SELECT_0); \
ADM8211_CSR_READ(SYNRF); \
\
if (prewrite) { \
ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_WRITE_SYNDATA_0); \
ADM8211_CSR_READ(SYNRF); \
} \
\
for (i = 0; i <= bits; i++) { \
if (bitbuf & (1 << (bits - i))) \
reg = ADM8211_SYNRF_WRITE_SYNDATA_1; \
else \
reg = ADM8211_SYNRF_WRITE_SYNDATA_0; \
\
ADM8211_CSR_WRITE(SYNRF, reg); \
ADM8211_CSR_READ(SYNRF); \
\
ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_WRITE_CLOCK_1); \
ADM8211_CSR_READ(SYNRF); \
ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_WRITE_CLOCK_0); \
ADM8211_CSR_READ(SYNRF); \
} \
\
if (postwrite == 1) { \
ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_IF_SELECT_0); \
ADM8211_CSR_READ(SYNRF); \
} \
if (postwrite == 2) { \
ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_IF_SELECT_1); \
ADM8211_CSR_READ(SYNRF); \
} \
\
ADM8211_CSR_WRITE(SYNRF, 0); \
ADM8211_CSR_READ(SYNRF); \
}
WRITE_SYN(max2820, 0x00FFF, 0, 0x0F, 12, 15, 1, 1)
WRITE_SYN(al2210l, 0xFFFFF, 4, 0x0F, 0, 23, 1, 1)
WRITE_SYN(rfmd2958, 0x3FFFF, 0, 0x1F, 18, 23, 0, 1)
WRITE_SYN(rfmd2948, 0x0FFFF, 4, 0x0F, 0, 21, 0, 2)
#undef WRITE_SYN
static int adm8211_write_bbp(struct ieee80211_hw *dev, u8 addr, u8 data)
{
struct adm8211_priv *priv = dev->priv;
unsigned int timeout;
u32 reg;
timeout = 10;
while (timeout > 0) {
reg = ADM8211_CSR_READ(BBPCTL);
if (!(reg & (ADM8211_BBPCTL_WR | ADM8211_BBPCTL_RD)))
break;
timeout--;
msleep(2);
}
if (timeout == 0) {
wiphy_debug(dev->wiphy,
"adm8211_write_bbp(%d,%d) failed prewrite (reg=0x%08x)\n",
addr, data, reg);
return -ETIMEDOUT;
}
switch (priv->bbp_type) {
case ADM8211_TYPE_INTERSIL:
reg = ADM8211_BBPCTL_MMISEL; /* three wire interface */
break;
case ADM8211_TYPE_RFMD:
reg = (0x20 << 24) | ADM8211_BBPCTL_TXCE | ADM8211_BBPCTL_CCAP |
(0x01 << 18);
break;
case ADM8211_TYPE_ADMTEK:
reg = (0x20 << 24) | ADM8211_BBPCTL_TXCE | ADM8211_BBPCTL_CCAP |
(0x05 << 18);
break;
}
reg |= ADM8211_BBPCTL_WR | (addr << 8) | data;
ADM8211_CSR_WRITE(BBPCTL, reg);
timeout = 10;
while (timeout > 0) {
reg = ADM8211_CSR_READ(BBPCTL);
if (!(reg & ADM8211_BBPCTL_WR))
break;
timeout--;
msleep(2);
}
if (timeout == 0) {
ADM8211_CSR_WRITE(BBPCTL, ADM8211_CSR_READ(BBPCTL) &
~ADM8211_BBPCTL_WR);
wiphy_debug(dev->wiphy,
"adm8211_write_bbp(%d,%d) failed postwrite (reg=0x%08x)\n",
addr, data, reg);
return -ETIMEDOUT;
}
return 0;
}
static int adm8211_rf_set_channel(struct ieee80211_hw *dev, unsigned int chan)
{
static const u32 adm8211_rfmd2958_reg5[] =
{0x22BD, 0x22D2, 0x22E8, 0x22FE, 0x2314, 0x232A, 0x2340,
0x2355, 0x236B, 0x2381, 0x2397, 0x23AD, 0x23C2, 0x23F7};
static const u32 adm8211_rfmd2958_reg6[] =
{0x05D17, 0x3A2E8, 0x2E8BA, 0x22E8B, 0x1745D, 0x0BA2E, 0x00000,
0x345D1, 0x28BA2, 0x1D174, 0x11745, 0x05D17, 0x3A2E8, 0x11745};
struct adm8211_priv *priv = dev->priv;
u8 ant_power = priv->ant_power > 0x3F ?
priv->eeprom->antenna_power[chan - 1] : priv->ant_power;
u8 tx_power = priv->tx_power > 0x3F ?
priv->eeprom->tx_power[chan - 1] : priv->tx_power;
u8 lpf_cutoff = priv->lpf_cutoff == 0xFF ?
priv->eeprom->lpf_cutoff[chan - 1] : priv->lpf_cutoff;
u8 lnags_thresh = priv->lnags_threshold == 0xFF ?
priv->eeprom->lnags_threshold[chan - 1] : priv->lnags_threshold;
u32 reg;
ADM8211_IDLE();
/* Program synthesizer to new channel */
switch (priv->transceiver_type) {
case ADM8211_RFMD2958:
case ADM8211_RFMD2958_RF3000_CONTROL_POWER:
adm8211_rf_write_syn_rfmd2958(dev, 0x00, 0x04007);
adm8211_rf_write_syn_rfmd2958(dev, 0x02, 0x00033);
adm8211_rf_write_syn_rfmd2958(dev, 0x05,
adm8211_rfmd2958_reg5[chan - 1]);
adm8211_rf_write_syn_rfmd2958(dev, 0x06,
adm8211_rfmd2958_reg6[chan - 1]);
break;
case ADM8211_RFMD2948:
adm8211_rf_write_syn_rfmd2948(dev, SI4126_MAIN_CONF,
SI4126_MAIN_XINDIV2);
adm8211_rf_write_syn_rfmd2948(dev, SI4126_POWERDOWN,
SI4126_POWERDOWN_PDIB |
SI4126_POWERDOWN_PDRB);
adm8211_rf_write_syn_rfmd2948(dev, SI4126_PHASE_DET_GAIN, 0);
adm8211_rf_write_syn_rfmd2948(dev, SI4126_RF2_N_DIV,
(chan == 14 ?
2110 : (2033 + (chan * 5))));
adm8211_rf_write_syn_rfmd2948(dev, SI4126_IF_N_DIV, 1496);
adm8211_rf_write_syn_rfmd2948(dev, SI4126_RF2_R_DIV, 44);
adm8211_rf_write_syn_rfmd2948(dev, SI4126_IF_R_DIV, 44);
break;
case ADM8211_MAX2820:
adm8211_rf_write_syn_max2820(dev, 0x3,
(chan == 14 ? 0x054 : (0x7 + (chan * 5))));
break;
case ADM8211_AL2210L:
adm8211_rf_write_syn_al2210l(dev, 0x0,
(chan == 14 ? 0x229B4 : (0x22967 + (chan * 5))));
break;
default:
wiphy_debug(dev->wiphy, "unsupported transceiver type %d\n",
priv->transceiver_type);
break;
}
/* write BBP regs */
if (priv->bbp_type == ADM8211_TYPE_RFMD) {
/* SMC 2635W specific? adm8211b doesn't use the 2948 though.. */
/* TODO: remove if SMC 2635W doesn't need this */
if (priv->transceiver_type == ADM8211_RFMD2948) {
reg = ADM8211_CSR_READ(GPIO);
reg &= 0xfffc0000;
reg |= ADM8211_CSR_GPIO_EN0;
if (chan != 14)
reg |= ADM8211_CSR_GPIO_O0;
ADM8211_CSR_WRITE(GPIO, reg);
}
if (priv->transceiver_type == ADM8211_RFMD2958) {
/* set PCNT2 */
adm8211_rf_write_syn_rfmd2958(dev, 0x0B, 0x07100);
/* set PCNT1 P_DESIRED/MID_BIAS */
reg = le16_to_cpu(priv->eeprom->cr49);
reg >>= 13;
reg <<= 15;
reg |= ant_power << 9;
adm8211_rf_write_syn_rfmd2958(dev, 0x0A, reg);
/* set TXRX TX_GAIN */
adm8211_rf_write_syn_rfmd2958(dev, 0x09, 0x00050 |
(priv->pdev->revision < ADM8211_REV_CA ? tx_power : 0));
} else {
reg = ADM8211_CSR_READ(PLCPHD);
reg &= 0xff00ffff;
reg |= tx_power << 18;
ADM8211_CSR_WRITE(PLCPHD, reg);
}
ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_SELRF |
ADM8211_SYNRF_PE1 | ADM8211_SYNRF_PHYRST);
ADM8211_CSR_READ(SYNRF);
msleep(30);
/* RF3000 BBP */
if (priv->transceiver_type != ADM8211_RFMD2958)
adm8211_write_bbp(dev, RF3000_TX_VAR_GAIN__TX_LEN_EXT,
tx_power<<2);
adm8211_write_bbp(dev, RF3000_LOW_GAIN_CALIB, lpf_cutoff);
adm8211_write_bbp(dev, RF3000_HIGH_GAIN_CALIB, lnags_thresh);
adm8211_write_bbp(dev, 0x1c, priv->pdev->revision == ADM8211_REV_BA ?
priv->eeprom->cr28 : 0);
adm8211_write_bbp(dev, 0x1d, priv->eeprom->cr29);
ADM8211_CSR_WRITE(SYNRF, 0);
/* Nothing to do for ADMtek BBP */
} else if (priv->bbp_type != ADM8211_TYPE_ADMTEK)
wiphy_debug(dev->wiphy, "unsupported BBP type %d\n",
priv->bbp_type);
ADM8211_RESTORE();
/* update current channel for adhoc (and maybe AP mode) */
reg = ADM8211_CSR_READ(CAP0);
reg &= ~0xF;
reg |= chan;
ADM8211_CSR_WRITE(CAP0, reg);
return 0;
}
static void adm8211_update_mode(struct ieee80211_hw *dev)
{
struct adm8211_priv *priv = dev->priv;
ADM8211_IDLE();
priv->soft_rx_crc = 0;
switch (priv->mode) {
case NL80211_IFTYPE_STATION:
priv->nar &= ~(ADM8211_NAR_PR | ADM8211_NAR_EA);
priv->nar |= ADM8211_NAR_ST | ADM8211_NAR_SR;
break;
case NL80211_IFTYPE_ADHOC:
priv->nar &= ~ADM8211_NAR_PR;
priv->nar |= ADM8211_NAR_EA | ADM8211_NAR_ST | ADM8211_NAR_SR;
/* don't trust the error bits on rev 0x20 and up in adhoc */
if (priv->pdev->revision >= ADM8211_REV_BA)
priv->soft_rx_crc = 1;
break;
case NL80211_IFTYPE_MONITOR:
priv->nar &= ~(ADM8211_NAR_EA | ADM8211_NAR_ST);
priv->nar |= ADM8211_NAR_PR | ADM8211_NAR_SR;
break;
}
ADM8211_RESTORE();
}
static void adm8211_hw_init_syn(struct ieee80211_hw *dev)
{
struct adm8211_priv *priv = dev->priv;
switch (priv->transceiver_type) {
case ADM8211_RFMD2958:
case ADM8211_RFMD2958_RF3000_CONTROL_POWER:
/* comments taken from ADMtek vendor driver */
/* Reset RF2958 after power on */
adm8211_rf_write_syn_rfmd2958(dev, 0x1F, 0x00000);
/* Initialize RF VCO Core Bias to maximum */
adm8211_rf_write_syn_rfmd2958(dev, 0x0C, 0x3001F);
/* Initialize IF PLL */
adm8211_rf_write_syn_rfmd2958(dev, 0x01, 0x29C03);
/* Initialize IF PLL Coarse Tuning */
adm8211_rf_write_syn_rfmd2958(dev, 0x03, 0x1FF6F);
/* Initialize RF PLL */
adm8211_rf_write_syn_rfmd2958(dev, 0x04, 0x29403);
/* Initialize RF PLL Coarse Tuning */
adm8211_rf_write_syn_rfmd2958(dev, 0x07, 0x1456F);
/* Initialize TX gain and filter BW (R9) */
adm8211_rf_write_syn_rfmd2958(dev, 0x09,
(priv->transceiver_type == ADM8211_RFMD2958 ?
0x10050 : 0x00050));
/* Initialize CAL register */
adm8211_rf_write_syn_rfmd2958(dev, 0x08, 0x3FFF8);
break;
case ADM8211_MAX2820:
adm8211_rf_write_syn_max2820(dev, 0x1, 0x01E);
adm8211_rf_write_syn_max2820(dev, 0x2, 0x001);
adm8211_rf_write_syn_max2820(dev, 0x3, 0x054);
adm8211_rf_write_syn_max2820(dev, 0x4, 0x310);
adm8211_rf_write_syn_max2820(dev, 0x5, 0x000);
break;
case ADM8211_AL2210L:
adm8211_rf_write_syn_al2210l(dev, 0x0, 0x0196C);
adm8211_rf_write_syn_al2210l(dev, 0x1, 0x007CB);
adm8211_rf_write_syn_al2210l(dev, 0x2, 0x3582F);
adm8211_rf_write_syn_al2210l(dev, 0x3, 0x010A9);
adm8211_rf_write_syn_al2210l(dev, 0x4, 0x77280);
adm8211_rf_write_syn_al2210l(dev, 0x5, 0x45641);
adm8211_rf_write_syn_al2210l(dev, 0x6, 0xEA130);
adm8211_rf_write_syn_al2210l(dev, 0x7, 0x80000);
adm8211_rf_write_syn_al2210l(dev, 0x8, 0x7850F);
adm8211_rf_write_syn_al2210l(dev, 0x9, 0xF900C);
adm8211_rf_write_syn_al2210l(dev, 0xA, 0x00000);
adm8211_rf_write_syn_al2210l(dev, 0xB, 0x00000);
break;
case ADM8211_RFMD2948:
default:
break;
}
}
static int adm8211_hw_init_bbp(struct ieee80211_hw *dev)
{
struct adm8211_priv *priv = dev->priv;
u32 reg;
/* write addresses */
if (priv->bbp_type == ADM8211_TYPE_INTERSIL) {
ADM8211_CSR_WRITE(MMIWA, 0x100E0C0A);
ADM8211_CSR_WRITE(MMIRD0, 0x00007C7E);
ADM8211_CSR_WRITE(MMIRD1, 0x00100000);
} else if (priv->bbp_type == ADM8211_TYPE_RFMD ||
priv->bbp_type == ADM8211_TYPE_ADMTEK) {
/* check specific BBP type */
switch (priv->specific_bbptype) {
case ADM8211_BBP_RFMD3000:
case ADM8211_BBP_RFMD3002:
ADM8211_CSR_WRITE(MMIWA, 0x00009101);
ADM8211_CSR_WRITE(MMIRD0, 0x00000301);
break;
case ADM8211_BBP_ADM8011:
ADM8211_CSR_WRITE(MMIWA, 0x00008903);
ADM8211_CSR_WRITE(MMIRD0, 0x00001716);
reg = ADM8211_CSR_READ(BBPCTL);
reg &= ~ADM8211_BBPCTL_TYPE;
reg |= 0x5 << 18;
ADM8211_CSR_WRITE(BBPCTL, reg);
break;
}
switch (priv->pdev->revision) {
case ADM8211_REV_CA:
if (priv->transceiver_type == ADM8211_RFMD2958 ||
priv->transceiver_type == ADM8211_RFMD2958_RF3000_CONTROL_POWER ||
priv->transceiver_type == ADM8211_RFMD2948)
ADM8211_CSR_WRITE(SYNCTL, 0x1 << 22);
else if (priv->transceiver_type == ADM8211_MAX2820 ||
priv->transceiver_type == ADM8211_AL2210L)
ADM8211_CSR_WRITE(SYNCTL, 0x3 << 22);
break;
case ADM8211_REV_BA:
reg = ADM8211_CSR_READ(MMIRD1);
reg &= 0x0000FFFF;
reg |= 0x7e100000;
ADM8211_CSR_WRITE(MMIRD1, reg);
break;
case ADM8211_REV_AB:
case ADM8211_REV_AF:
default:
ADM8211_CSR_WRITE(MMIRD1, 0x7e100000);
break;
}
/* For RFMD */
ADM8211_CSR_WRITE(MACTEST, 0x800);
}
adm8211_hw_init_syn(dev);
/* Set RF Power control IF pin to PE1+PHYRST# */
ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_SELRF |
ADM8211_SYNRF_PE1 | ADM8211_SYNRF_PHYRST);
ADM8211_CSR_READ(SYNRF);
msleep(20);
/* write BBP regs */
if (priv->bbp_type == ADM8211_TYPE_RFMD) {
/* RF3000 BBP */
/* another set:
* 11: c8
* 14: 14
* 15: 50 (chan 1..13; chan 14: d0)
* 1c: 00
* 1d: 84
*/
adm8211_write_bbp(dev, RF3000_CCA_CTRL, 0x80);
/* antenna selection: diversity */
adm8211_write_bbp(dev, RF3000_DIVERSITY__RSSI, 0x80);
adm8211_write_bbp(dev, RF3000_TX_VAR_GAIN__TX_LEN_EXT, 0x74);
adm8211_write_bbp(dev, RF3000_LOW_GAIN_CALIB, 0x38);
adm8211_write_bbp(dev, RF3000_HIGH_GAIN_CALIB, 0x40);
if (priv->eeprom->major_version < 2) {
adm8211_write_bbp(dev, 0x1c, 0x00);
adm8211_write_bbp(dev, 0x1d, 0x80);
} else {
if (priv->pdev->revision == ADM8211_REV_BA)
adm8211_write_bbp(dev, 0x1c, priv->eeprom->cr28);
else
adm8211_write_bbp(dev, 0x1c, 0x00);
adm8211_write_bbp(dev, 0x1d, priv->eeprom->cr29);
}
} else if (priv->bbp_type == ADM8211_TYPE_ADMTEK) {
/* reset baseband */
adm8211_write_bbp(dev, 0x00, 0xFF);
/* antenna selection: diversity */
adm8211_write_bbp(dev, 0x07, 0x0A);
/* TODO: find documentation for this */
switch (priv->transceiver_type) {
case ADM8211_RFMD2958:
case ADM8211_RFMD2958_RF3000_CONTROL_POWER:
adm8211_write_bbp(dev, 0x00, 0x00);
adm8211_write_bbp(dev, 0x01, 0x00);
adm8211_write_bbp(dev, 0x02, 0x00);
adm8211_write_bbp(dev, 0x03, 0x00);
adm8211_write_bbp(dev, 0x06, 0x0f);
adm8211_write_bbp(dev, 0x09, 0x00);
adm8211_write_bbp(dev, 0x0a, 0x00);
adm8211_write_bbp(dev, 0x0b, 0x00);
adm8211_write_bbp(dev, 0x0c, 0x00);
adm8211_write_bbp(dev, 0x0f, 0xAA);
adm8211_write_bbp(dev, 0x10, 0x8c);
adm8211_write_bbp(dev, 0x11, 0x43);
adm8211_write_bbp(dev, 0x18, 0x40);
adm8211_write_bbp(dev, 0x20, 0x23);
adm8211_write_bbp(dev, 0x21, 0x02);
adm8211_write_bbp(dev, 0x22, 0x28);
adm8211_write_bbp(dev, 0x23, 0x30);
adm8211_write_bbp(dev, 0x24, 0x2d);
adm8211_write_bbp(dev, 0x28, 0x35);
adm8211_write_bbp(dev, 0x2a, 0x8c);
adm8211_write_bbp(dev, 0x2b, 0x81);
adm8211_write_bbp(dev, 0x2c, 0x44);
adm8211_write_bbp(dev, 0x2d, 0x0A);
adm8211_write_bbp(dev, 0x29, 0x40);
adm8211_write_bbp(dev, 0x60, 0x08);
adm8211_write_bbp(dev, 0x64, 0x01);
break;
case ADM8211_MAX2820:
adm8211_write_bbp(dev, 0x00, 0x00);
adm8211_write_bbp(dev, 0x01, 0x00);
adm8211_write_bbp(dev, 0x02, 0x00);
adm8211_write_bbp(dev, 0x03, 0x00);
adm8211_write_bbp(dev, 0x06, 0x0f);
adm8211_write_bbp(dev, 0x09, 0x05);
adm8211_write_bbp(dev, 0x0a, 0x02);
adm8211_write_bbp(dev, 0x0b, 0x00);
adm8211_write_bbp(dev, 0x0c, 0x0f);
adm8211_write_bbp(dev, 0x0f, 0x55);
adm8211_write_bbp(dev, 0x10, 0x8d);
adm8211_write_bbp(dev, 0x11, 0x43);
adm8211_write_bbp(dev, 0x18, 0x4a);
adm8211_write_bbp(dev, 0x20, 0x20);
adm8211_write_bbp(dev, 0x21, 0x02);
adm8211_write_bbp(dev, 0x22, 0x23);
adm8211_write_bbp(dev, 0x23, 0x30);
adm8211_write_bbp(dev, 0x24, 0x2d);
adm8211_write_bbp(dev, 0x2a, 0x8c);
adm8211_write_bbp(dev, 0x2b, 0x81);
adm8211_write_bbp(dev, 0x2c, 0x44);
adm8211_write_bbp(dev, 0x29, 0x4a);
adm8211_write_bbp(dev, 0x60, 0x2b);
adm8211_write_bbp(dev, 0x64, 0x01);
break;
case ADM8211_AL2210L:
adm8211_write_bbp(dev, 0x00, 0x00);
adm8211_write_bbp(dev, 0x01, 0x00);
adm8211_write_bbp(dev, 0x02, 0x00);
adm8211_write_bbp(dev, 0x03, 0x00);
adm8211_write_bbp(dev, 0x06, 0x0f);
adm8211_write_bbp(dev, 0x07, 0x05);
adm8211_write_bbp(dev, 0x08, 0x03);
adm8211_write_bbp(dev, 0x09, 0x00);
adm8211_write_bbp(dev, 0x0a, 0x00);
adm8211_write_bbp(dev, 0x0b, 0x00);
adm8211_write_bbp(dev, 0x0c, 0x10);
adm8211_write_bbp(dev, 0x0f, 0x55);
adm8211_write_bbp(dev, 0x10, 0x8d);
adm8211_write_bbp(dev, 0x11, 0x43);
adm8211_write_bbp(dev, 0x18, 0x4a);
adm8211_write_bbp(dev, 0x20, 0x20);
adm8211_write_bbp(dev, 0x21, 0x02);
adm8211_write_bbp(dev, 0x22, 0x23);
adm8211_write_bbp(dev, 0x23, 0x30);
adm8211_write_bbp(dev, 0x24, 0x2d);
adm8211_write_bbp(dev, 0x2a, 0xaa);
adm8211_write_bbp(dev, 0x2b, 0x81);
adm8211_write_bbp(dev, 0x2c, 0x44);
adm8211_write_bbp(dev, 0x29, 0xfa);
adm8211_write_bbp(dev, 0x60, 0x2d);
adm8211_write_bbp(dev, 0x64, 0x01);
break;
case ADM8211_RFMD2948:
break;
default:
wiphy_debug(dev->wiphy, "unsupported transceiver %d\n",
priv->transceiver_type);
break;
}
} else
wiphy_debug(dev->wiphy, "unsupported BBP %d\n", priv->bbp_type);
ADM8211_CSR_WRITE(SYNRF, 0);
/* Set RF CAL control source to MAC control */
reg = ADM8211_CSR_READ(SYNCTL);
reg |= ADM8211_SYNCTL_SELCAL;
ADM8211_CSR_WRITE(SYNCTL, reg);
return 0;
}
/* configures hw beacons/probe responses */
static int adm8211_set_rate(struct ieee80211_hw *dev)
{
struct adm8211_priv *priv = dev->priv;
u32 reg;
int i = 0;
u8 rate_buf[12] = {0};
/* write supported rates */
if (priv->pdev->revision != ADM8211_REV_BA) {
rate_buf[0] = ARRAY_SIZE(adm8211_rates);
for (i = 0; i < ARRAY_SIZE(adm8211_rates); i++)
rate_buf[i + 1] = (adm8211_rates[i].bitrate / 5) | 0x80;
} else {
/* workaround for rev BA specific bug */
rate_buf[0] = 0x04;
rate_buf[1] = 0x82;
rate_buf[2] = 0x04;
rate_buf[3] = 0x0b;
rate_buf[4] = 0x16;
}
adm8211_write_sram_bytes(dev, ADM8211_SRAM_SUPP_RATE, rate_buf,
ARRAY_SIZE(adm8211_rates) + 1);
reg = ADM8211_CSR_READ(PLCPHD) & 0x00FFFFFF; /* keep bits 0-23 */
reg |= 1 << 15; /* short preamble */
reg |= 110 << 24;
ADM8211_CSR_WRITE(PLCPHD, reg);
/* MTMLT = 512 TU (max TX MSDU lifetime)
* BCNTSIG = plcp_signal (beacon, probe resp, and atim TX rate)
* SRTYLIM = 224 (short retry limit, TX header value is default) */
ADM8211_CSR_WRITE(TXLMT, (512 << 16) | (110 << 8) | (224 << 0));
return 0;
}
static void adm8211_hw_init(struct ieee80211_hw *dev)
{
struct adm8211_priv *priv = dev->priv;
u32 reg;
u8 cline;
reg = ADM8211_CSR_READ(PAR);
reg |= ADM8211_PAR_MRLE | ADM8211_PAR_MRME;
reg &= ~(ADM8211_PAR_BAR | ADM8211_PAR_CAL);
if (!pci_set_mwi(priv->pdev)) {
reg |= 0x1 << 24;
pci_read_config_byte(priv->pdev, PCI_CACHE_LINE_SIZE, &cline);
switch (cline) {
case 0x8: reg |= (0x1 << 14);
break;
case 0x16: reg |= (0x2 << 14);
break;
case 0x32: reg |= (0x3 << 14);
break;
default: reg |= (0x0 << 14);
break;
}
}
ADM8211_CSR_WRITE(PAR, reg);
reg = ADM8211_CSR_READ(CSR_TEST1);
reg &= ~(0xF << 28);
reg |= (1 << 28) | (1 << 31);
ADM8211_CSR_WRITE(CSR_TEST1, reg);
/* lose link after 4 lost beacons */
reg = (0x04 << 21) | ADM8211_WCSR_TSFTWE | ADM8211_WCSR_LSOE;
ADM8211_CSR_WRITE(WCSR, reg);
/* Disable APM, enable receive FIFO threshold, and set drain receive
* threshold to store-and-forward */
reg = ADM8211_CSR_READ(CMDR);
reg &= ~(ADM8211_CMDR_APM | ADM8211_CMDR_DRT);
reg |= ADM8211_CMDR_RTE | ADM8211_CMDR_DRT_SF;
ADM8211_CSR_WRITE(CMDR, reg);
adm8211_set_rate(dev);
/* 4-bit values:
* PWR1UP = 8 * 2 ms
* PWR0PAPE = 8 us or 5 us
* PWR1PAPE = 1 us or 3 us
* PWR0TRSW = 5 us
* PWR1TRSW = 12 us
* PWR0PE2 = 13 us
* PWR1PE2 = 1 us
* PWR0TXPE = 8 or 6 */
if (priv->pdev->revision < ADM8211_REV_CA)
ADM8211_CSR_WRITE(TOFS2, 0x8815cd18);
else
ADM8211_CSR_WRITE(TOFS2, 0x8535cd16);
/* Enable store and forward for transmit */
priv->nar = ADM8211_NAR_SF | ADM8211_NAR_PB;
ADM8211_CSR_WRITE(NAR, priv->nar);
/* Reset RF */
ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_RADIO);
ADM8211_CSR_READ(SYNRF);
msleep(10);
ADM8211_CSR_WRITE(SYNRF, 0);
ADM8211_CSR_READ(SYNRF);
msleep(5);
/* Set CFP Max Duration to 0x10 TU */
reg = ADM8211_CSR_READ(CFPP);
reg &= ~(0xffff << 8);
reg |= 0x0010 << 8;
ADM8211_CSR_WRITE(CFPP, reg);
/* USCNT = 0x16 (number of system clocks, 22 MHz, in 1us
* TUCNT = 0x3ff - Tu counter 1024 us */
ADM8211_CSR_WRITE(TOFS0, (0x16 << 24) | 0x3ff);
/* SLOT=20 us, SIFS=110 cycles of 22 MHz (5 us),
* DIFS=50 us, EIFS=100 us */
if (priv->pdev->revision < ADM8211_REV_CA)
ADM8211_CSR_WRITE(IFST, (20 << 23) | (110 << 15) |
(50 << 9) | 100);
else
ADM8211_CSR_WRITE(IFST, (20 << 23) | (24 << 15) |
(50 << 9) | 100);
/* PCNT = 1 (MAC idle time awake/sleep, unit S)
* RMRD = 2346 * 8 + 1 us (max RX duration) */
ADM8211_CSR_WRITE(RMD, (1 << 16) | 18769);
/* MART=65535 us, MIRT=256 us, TSFTOFST=0 us */
ADM8211_CSR_WRITE(RSPT, 0xffffff00);
/* Initialize BBP (and SYN) */
adm8211_hw_init_bbp(dev);
/* make sure interrupts are off */
ADM8211_CSR_WRITE(IER, 0);
/* ACK interrupts */
ADM8211_CSR_WRITE(STSR, ADM8211_CSR_READ(STSR));
/* Setup WEP (turns it off for now) */
reg = ADM8211_CSR_READ(MACTEST);
reg &= ~(7 << 20);
ADM8211_CSR_WRITE(MACTEST, reg);
reg = ADM8211_CSR_READ(WEPCTL);
reg &= ~ADM8211_WEPCTL_WEPENABLE;
reg |= ADM8211_WEPCTL_WEPRXBYP;
ADM8211_CSR_WRITE(WEPCTL, reg);
/* Clear the missed-packet counter. */
ADM8211_CSR_READ(LPC);
}
static int adm8211_hw_reset(struct ieee80211_hw *dev)
{
struct adm8211_priv *priv = dev->priv;
u32 reg, tmp;
int timeout = 100;
/* Power-on issue */
/* TODO: check if this is necessary */
ADM8211_CSR_WRITE(FRCTL, 0);
/* Reset the chip */
tmp = ADM8211_CSR_READ(PAR);
ADM8211_CSR_WRITE(PAR, ADM8211_PAR_SWR);
while ((ADM8211_CSR_READ(PAR) & ADM8211_PAR_SWR) && timeout--)
msleep(50);
if (timeout <= 0)
return -ETIMEDOUT;
ADM8211_CSR_WRITE(PAR, tmp);
if (priv->pdev->revision == ADM8211_REV_BA &&
(priv->transceiver_type == ADM8211_RFMD2958_RF3000_CONTROL_POWER ||
priv->transceiver_type == ADM8211_RFMD2958)) {
reg = ADM8211_CSR_READ(CSR_TEST1);
reg |= (1 << 4) | (1 << 5);
ADM8211_CSR_WRITE(CSR_TEST1, reg);
} else if (priv->pdev->revision == ADM8211_REV_CA) {
reg = ADM8211_CSR_READ(CSR_TEST1);
reg &= ~((1 << 4) | (1 << 5));
ADM8211_CSR_WRITE(CSR_TEST1, reg);
}
ADM8211_CSR_WRITE(FRCTL, 0);
reg = ADM8211_CSR_READ(CSR_TEST0);
reg |= ADM8211_CSR_TEST0_EPRLD; /* EEPROM Recall */
ADM8211_CSR_WRITE(CSR_TEST0, reg);
adm8211_clear_sram(dev);
return 0;
}
static u64 adm8211_get_tsft(struct ieee80211_hw *dev)
{
struct adm8211_priv *priv = dev->priv;
u32 tsftl;
u64 tsft;
tsftl = ADM8211_CSR_READ(TSFTL);
tsft = ADM8211_CSR_READ(TSFTH);
tsft <<= 32;
tsft |= tsftl;
return tsft;
}
static void adm8211_set_interval(struct ieee80211_hw *dev,
unsigned short bi, unsigned short li)
{
struct adm8211_priv *priv = dev->priv;
u32 reg;
/* BP (beacon interval) = data->beacon_interval
* LI (listen interval) = data->listen_interval (in beacon intervals) */
reg = (bi << 16) | li;
ADM8211_CSR_WRITE(BPLI, reg);
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 13:29:23 +08:00
static void adm8211_set_bssid(struct ieee80211_hw *dev, const u8 *bssid)
{
struct adm8211_priv *priv = dev->priv;
u32 reg;
ADM8211_CSR_WRITE(BSSID0, le32_to_cpu(*(__le32 *)bssid));
reg = ADM8211_CSR_READ(ABDA1);
reg &= 0x0000ffff;
reg |= (bssid[4] << 16) | (bssid[5] << 24);
ADM8211_CSR_WRITE(ABDA1, reg);
}
static int adm8211_config(struct ieee80211_hw *dev, u32 changed)
{
struct adm8211_priv *priv = dev->priv;
struct ieee80211_conf *conf = &dev->conf;
int channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
if (channel != priv->channel) {
priv->channel = channel;
adm8211_rf_set_channel(dev, priv->channel);
}
return 0;
}
static void adm8211_bss_info_changed(struct ieee80211_hw *dev,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *conf,
u32 changes)
{
struct adm8211_priv *priv = dev->priv;
if (!(changes & BSS_CHANGED_BSSID))
return;
if (memcmp(conf->bssid, priv->bssid, ETH_ALEN)) {
adm8211_set_bssid(dev, conf->bssid);
memcpy(priv->bssid, conf->bssid, ETH_ALEN);
}
}
static u64 adm8211_prepare_multicast(struct ieee80211_hw *hw,
struct netdev_hw_addr_list *mc_list)
{
unsigned int bit_nr;
u32 mc_filter[2];
struct netdev_hw_addr *ha;
mc_filter[1] = mc_filter[0] = 0;
netdev_hw_addr_list_for_each(ha, mc_list) {
bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
bit_nr &= 0x3F;
mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
}
return mc_filter[0] | ((u64)(mc_filter[1]) << 32);
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 13:29:23 +08:00
static void adm8211_configure_filter(struct ieee80211_hw *dev,
unsigned int changed_flags,
unsigned int *total_flags,
u64 multicast)
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 13:29:23 +08:00
{
static const u8 bcast[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
struct adm8211_priv *priv = dev->priv;
unsigned int new_flags;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 13:29:23 +08:00
u32 mc_filter[2];
mc_filter[0] = multicast;
mc_filter[1] = multicast >> 32;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 13:29:23 +08:00
new_flags = 0;
if (*total_flags & FIF_PROMISC_IN_BSS) {
new_flags |= FIF_PROMISC_IN_BSS;
priv->nar |= ADM8211_NAR_PR;
priv->nar &= ~ADM8211_NAR_MM;
mc_filter[1] = mc_filter[0] = ~0;
} else if (*total_flags & FIF_ALLMULTI || multicast == ~(0ULL)) {
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 13:29:23 +08:00
new_flags |= FIF_ALLMULTI;
priv->nar &= ~ADM8211_NAR_PR;
priv->nar |= ADM8211_NAR_MM;
mc_filter[1] = mc_filter[0] = ~0;
} else {
priv->nar &= ~(ADM8211_NAR_MM | ADM8211_NAR_PR);
}
ADM8211_IDLE_RX();
ADM8211_CSR_WRITE(MAR0, mc_filter[0]);
ADM8211_CSR_WRITE(MAR1, mc_filter[1]);
ADM8211_CSR_READ(NAR);
if (priv->nar & ADM8211_NAR_PR)
dev->flags |= IEEE80211_HW_RX_INCLUDES_FCS;
else
dev->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS;
if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
adm8211_set_bssid(dev, bcast);
else
adm8211_set_bssid(dev, priv->bssid);
ADM8211_RESTORE();
*total_flags = new_flags;
}
static int adm8211_add_interface(struct ieee80211_hw *dev,
struct ieee80211_vif *vif)
{
struct adm8211_priv *priv = dev->priv;
if (priv->mode != NL80211_IFTYPE_MONITOR)
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 13:29:23 +08:00
return -EOPNOTSUPP;
switch (vif->type) {
case NL80211_IFTYPE_STATION:
priv->mode = vif->type;
break;
default:
return -EOPNOTSUPP;
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 13:29:23 +08:00
ADM8211_IDLE();
ADM8211_CSR_WRITE(PAR0, le32_to_cpu(*(__le32 *)vif->addr));
ADM8211_CSR_WRITE(PAR1, le16_to_cpu(*(__le16 *)(vif->addr + 4)));
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 13:29:23 +08:00
adm8211_update_mode(dev);
ADM8211_RESTORE();
return 0;
}
static void adm8211_remove_interface(struct ieee80211_hw *dev,
struct ieee80211_vif *vif)
{
struct adm8211_priv *priv = dev->priv;
priv->mode = NL80211_IFTYPE_MONITOR;
}
static int adm8211_init_rings(struct ieee80211_hw *dev)
{
struct adm8211_priv *priv = dev->priv;
struct adm8211_desc *desc = NULL;
struct adm8211_rx_ring_info *rx_info;
struct adm8211_tx_ring_info *tx_info;
unsigned int i;
for (i = 0; i < priv->rx_ring_size; i++) {
desc = &priv->rx_ring[i];
desc->status = 0;
desc->length = cpu_to_le32(RX_PKT_SIZE);
priv->rx_buffers[i].skb = NULL;
}
/* Mark the end of RX ring; hw returns to base address after this
* descriptor */
desc->length |= cpu_to_le32(RDES1_CONTROL_RER);
for (i = 0; i < priv->rx_ring_size; i++) {
desc = &priv->rx_ring[i];
rx_info = &priv->rx_buffers[i];
rx_info->skb = dev_alloc_skb(RX_PKT_SIZE);
if (rx_info->skb == NULL)
break;
rx_info->mapping = pci_map_single(priv->pdev,
skb_tail_pointer(rx_info->skb),
RX_PKT_SIZE,
PCI_DMA_FROMDEVICE);
desc->buffer1 = cpu_to_le32(rx_info->mapping);
desc->status = cpu_to_le32(RDES0_STATUS_OWN | RDES0_STATUS_SQL);
}
/* Setup TX ring. TX buffers descriptors will be filled in as needed */
for (i = 0; i < priv->tx_ring_size; i++) {
desc = &priv->tx_ring[i];
tx_info = &priv->tx_buffers[i];
tx_info->skb = NULL;
tx_info->mapping = 0;
desc->status = 0;
}
desc->length = cpu_to_le32(TDES1_CONTROL_TER);
priv->cur_rx = priv->cur_tx = priv->dirty_tx = 0;
ADM8211_CSR_WRITE(RDB, priv->rx_ring_dma);
ADM8211_CSR_WRITE(TDBD, priv->tx_ring_dma);
return 0;
}
static void adm8211_free_rings(struct ieee80211_hw *dev)
{
struct adm8211_priv *priv = dev->priv;
unsigned int i;
for (i = 0; i < priv->rx_ring_size; i++) {
if (!priv->rx_buffers[i].skb)
continue;
pci_unmap_single(
priv->pdev,
priv->rx_buffers[i].mapping,
RX_PKT_SIZE, PCI_DMA_FROMDEVICE);
dev_kfree_skb(priv->rx_buffers[i].skb);
}
for (i = 0; i < priv->tx_ring_size; i++) {
if (!priv->tx_buffers[i].skb)
continue;
pci_unmap_single(priv->pdev,
priv->tx_buffers[i].mapping,
priv->tx_buffers[i].skb->len,
PCI_DMA_TODEVICE);
dev_kfree_skb(priv->tx_buffers[i].skb);
}
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 13:29:23 +08:00
static int adm8211_start(struct ieee80211_hw *dev)
{
struct adm8211_priv *priv = dev->priv;
int retval;
/* Power up MAC and RF chips */
retval = adm8211_hw_reset(dev);
if (retval) {
wiphy_err(dev->wiphy, "hardware reset failed\n");
goto fail;
}
retval = adm8211_init_rings(dev);
if (retval) {
wiphy_err(dev->wiphy, "failed to initialize rings\n");
goto fail;
}
/* Init hardware */
adm8211_hw_init(dev);
adm8211_rf_set_channel(dev, priv->channel);
retval = request_irq(priv->pdev->irq, adm8211_interrupt,
IRQF_SHARED, "adm8211", dev);
if (retval) {
wiphy_err(dev->wiphy, "failed to register IRQ handler\n");
goto fail;
}
ADM8211_CSR_WRITE(IER, ADM8211_IER_NIE | ADM8211_IER_AIE |
ADM8211_IER_RCIE | ADM8211_IER_TCIE |
ADM8211_IER_TDUIE | ADM8211_IER_GPTIE);
priv->mode = NL80211_IFTYPE_MONITOR;
adm8211_update_mode(dev);
ADM8211_CSR_WRITE(RDR, 0);
adm8211_set_interval(dev, 100, 10);
return 0;
fail:
return retval;
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 13:29:23 +08:00
static void adm8211_stop(struct ieee80211_hw *dev)
{
struct adm8211_priv *priv = dev->priv;
priv->mode = NL80211_IFTYPE_UNSPECIFIED;
priv->nar = 0;
ADM8211_CSR_WRITE(NAR, 0);
ADM8211_CSR_WRITE(IER, 0);
ADM8211_CSR_READ(NAR);
free_irq(priv->pdev->irq, dev);
adm8211_free_rings(dev);
}
static void adm8211_calc_durations(int *dur, int *plcp, size_t payload_len, int len,
int plcp_signal, int short_preamble)
{
/* Alternative calculation from NetBSD: */
/* IEEE 802.11b durations for DSSS PHY in microseconds */
#define IEEE80211_DUR_DS_LONG_PREAMBLE 144
#define IEEE80211_DUR_DS_SHORT_PREAMBLE 72
#define IEEE80211_DUR_DS_FAST_PLCPHDR 24
#define IEEE80211_DUR_DS_SLOW_PLCPHDR 48
#define IEEE80211_DUR_DS_SLOW_ACK 112
#define IEEE80211_DUR_DS_FAST_ACK 56
#define IEEE80211_DUR_DS_SLOW_CTS 112
#define IEEE80211_DUR_DS_FAST_CTS 56
#define IEEE80211_DUR_DS_SLOT 20
#define IEEE80211_DUR_DS_SIFS 10
int remainder;
*dur = (80 * (24 + payload_len) + plcp_signal - 1)
/ plcp_signal;
if (plcp_signal <= PLCP_SIGNAL_2M)
/* 1-2Mbps WLAN: send ACK/CTS at 1Mbps */
*dur += 3 * (IEEE80211_DUR_DS_SIFS +
IEEE80211_DUR_DS_SHORT_PREAMBLE +
IEEE80211_DUR_DS_FAST_PLCPHDR) +
IEEE80211_DUR_DS_SLOW_CTS + IEEE80211_DUR_DS_SLOW_ACK;
else
/* 5-11Mbps WLAN: send ACK/CTS at 2Mbps */
*dur += 3 * (IEEE80211_DUR_DS_SIFS +
IEEE80211_DUR_DS_SHORT_PREAMBLE +
IEEE80211_DUR_DS_FAST_PLCPHDR) +
IEEE80211_DUR_DS_FAST_CTS + IEEE80211_DUR_DS_FAST_ACK;
/* lengthen duration if long preamble */
if (!short_preamble)
*dur += 3 * (IEEE80211_DUR_DS_LONG_PREAMBLE -
IEEE80211_DUR_DS_SHORT_PREAMBLE) +
3 * (IEEE80211_DUR_DS_SLOW_PLCPHDR -
IEEE80211_DUR_DS_FAST_PLCPHDR);
*plcp = (80 * len) / plcp_signal;
remainder = (80 * len) % plcp_signal;
if (plcp_signal == PLCP_SIGNAL_11M &&
remainder <= 30 && remainder > 0)
*plcp = (*plcp | 0x8000) + 1;
else if (remainder)
(*plcp)++;
}
/* Transmit skb w/adm8211_tx_hdr (802.11 header created by hardware) */
static void adm8211_tx_raw(struct ieee80211_hw *dev, struct sk_buff *skb,
u16 plcp_signal,
size_t hdrlen)
{
struct adm8211_priv *priv = dev->priv;
unsigned long flags;
dma_addr_t mapping;
unsigned int entry;
u32 flag;
mapping = pci_map_single(priv->pdev, skb->data, skb->len,
PCI_DMA_TODEVICE);
spin_lock_irqsave(&priv->lock, flags);
if (priv->cur_tx - priv->dirty_tx == priv->tx_ring_size / 2)
flag = TDES1_CONTROL_IC | TDES1_CONTROL_LS | TDES1_CONTROL_FS;
else
flag = TDES1_CONTROL_LS | TDES1_CONTROL_FS;
if (priv->cur_tx - priv->dirty_tx == priv->tx_ring_size - 2)
ieee80211_stop_queue(dev, 0);
entry = priv->cur_tx % priv->tx_ring_size;
priv->tx_buffers[entry].skb = skb;
priv->tx_buffers[entry].mapping = mapping;
priv->tx_buffers[entry].hdrlen = hdrlen;
priv->tx_ring[entry].buffer1 = cpu_to_le32(mapping);
if (entry == priv->tx_ring_size - 1)
flag |= TDES1_CONTROL_TER;
priv->tx_ring[entry].length = cpu_to_le32(flag | skb->len);
/* Set TX rate (SIGNAL field in PLCP PPDU format) */
flag = TDES0_CONTROL_OWN | (plcp_signal << 20) | 8 /* ? */;
priv->tx_ring[entry].status = cpu_to_le32(flag);
priv->cur_tx++;
spin_unlock_irqrestore(&priv->lock, flags);
/* Trigger transmit poll */
ADM8211_CSR_WRITE(TDR, 0);
}
/* Put adm8211_tx_hdr on skb and transmit */
static void adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
{
struct adm8211_tx_hdr *txhdr;
size_t payload_len, hdrlen;
int plcp, dur, len, plcp_signal, short_preamble;
struct ieee80211_hdr *hdr;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_rate *txrate = ieee80211_get_tx_rate(dev, info);
u8 rc_flags;
rc_flags = info->control.rates[0].flags;
short_preamble = !!(rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE);
plcp_signal = txrate->bitrate;
hdr = (struct ieee80211_hdr *)skb->data;
hdrlen = ieee80211_hdrlen(hdr->frame_control);
memcpy(skb->cb, skb->data, hdrlen);
hdr = (struct ieee80211_hdr *)skb->cb;
skb_pull(skb, hdrlen);
payload_len = skb->len;
txhdr = (struct adm8211_tx_hdr *) skb_push(skb, sizeof(*txhdr));
memset(txhdr, 0, sizeof(*txhdr));
memcpy(txhdr->da, ieee80211_get_DA(hdr), ETH_ALEN);
txhdr->signal = plcp_signal;
txhdr->frame_body_size = cpu_to_le16(payload_len);
txhdr->frame_control = hdr->frame_control;
len = hdrlen + payload_len + FCS_LEN;
txhdr->frag = cpu_to_le16(0x0FFF);
adm8211_calc_durations(&dur, &plcp, payload_len,
len, plcp_signal, short_preamble);
txhdr->plcp_frag_head_len = cpu_to_le16(plcp);
txhdr->plcp_frag_tail_len = cpu_to_le16(plcp);
txhdr->dur_frag_head = cpu_to_le16(dur);
txhdr->dur_frag_tail = cpu_to_le16(dur);
txhdr->header_control = cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_EXTEND_HEADER);
if (short_preamble)
txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_SHORT_PREAMBLE);
if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS)
txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_RTS);
txhdr->retry_limit = info->control.rates[0].count;
adm8211_tx_raw(dev, skb, plcp_signal, hdrlen);
}
static int adm8211_alloc_rings(struct ieee80211_hw *dev)
{
struct adm8211_priv *priv = dev->priv;
unsigned int ring_size;
priv->rx_buffers = kmalloc(sizeof(*priv->rx_buffers) * priv->rx_ring_size +
sizeof(*priv->tx_buffers) * priv->tx_ring_size, GFP_KERNEL);
if (!priv->rx_buffers)
return -ENOMEM;
priv->tx_buffers = (void *)priv->rx_buffers +
sizeof(*priv->rx_buffers) * priv->rx_ring_size;
/* Allocate TX/RX descriptors */
ring_size = sizeof(struct adm8211_desc) * priv->rx_ring_size +
sizeof(struct adm8211_desc) * priv->tx_ring_size;
priv->rx_ring = pci_alloc_consistent(priv->pdev, ring_size,
&priv->rx_ring_dma);
if (!priv->rx_ring) {
kfree(priv->rx_buffers);
priv->rx_buffers = NULL;
priv->tx_buffers = NULL;
return -ENOMEM;
}
priv->tx_ring = (struct adm8211_desc *)(priv->rx_ring +
priv->rx_ring_size);
priv->tx_ring_dma = priv->rx_ring_dma +
sizeof(struct adm8211_desc) * priv->rx_ring_size;
return 0;
}
static const struct ieee80211_ops adm8211_ops = {
.tx = adm8211_tx,
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 13:29:23 +08:00
.start = adm8211_start,
.stop = adm8211_stop,
.add_interface = adm8211_add_interface,
.remove_interface = adm8211_remove_interface,
.config = adm8211_config,
.bss_info_changed = adm8211_bss_info_changed,
.prepare_multicast = adm8211_prepare_multicast,
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 13:29:23 +08:00
.configure_filter = adm8211_configure_filter,
.get_stats = adm8211_get_stats,
.get_tsf = adm8211_get_tsft
};
static int __devinit adm8211_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct ieee80211_hw *dev;
struct adm8211_priv *priv;
unsigned long mem_addr, mem_len;
unsigned int io_addr, io_len;
int err;
u32 reg;
u8 perm_addr[ETH_ALEN];
err = pci_enable_device(pdev);
if (err) {
printk(KERN_ERR "%s (adm8211): Cannot enable new PCI device\n",
pci_name(pdev));
return err;
}
io_addr = pci_resource_start(pdev, 0);
io_len = pci_resource_len(pdev, 0);
mem_addr = pci_resource_start(pdev, 1);
mem_len = pci_resource_len(pdev, 1);
if (io_len < 256 || mem_len < 1024) {
printk(KERN_ERR "%s (adm8211): Too short PCI resources\n",
pci_name(pdev));
goto err_disable_pdev;
}
/* check signature */
pci_read_config_dword(pdev, 0x80 /* CR32 */, &reg);
if (reg != ADM8211_SIG1 && reg != ADM8211_SIG2) {
printk(KERN_ERR "%s (adm8211): Invalid signature (0x%x)\n",
pci_name(pdev), reg);
goto err_disable_pdev;
}
err = pci_request_regions(pdev, "adm8211");
if (err) {
printk(KERN_ERR "%s (adm8211): Cannot obtain PCI resources\n",
pci_name(pdev));
return err; /* someone else grabbed it? don't disable it */
}
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) ||
pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
printk(KERN_ERR "%s (adm8211): No suitable DMA available\n",
pci_name(pdev));
goto err_free_reg;
}
pci_set_master(pdev);
dev = ieee80211_alloc_hw(sizeof(*priv), &adm8211_ops);
if (!dev) {
printk(KERN_ERR "%s (adm8211): ieee80211 alloc failed\n",
pci_name(pdev));
err = -ENOMEM;
goto err_free_reg;
}
priv = dev->priv;
priv->pdev = pdev;
spin_lock_init(&priv->lock);
SET_IEEE80211_DEV(dev, &pdev->dev);
pci_set_drvdata(pdev, dev);
priv->map = pci_iomap(pdev, 1, mem_len);
if (!priv->map)
priv->map = pci_iomap(pdev, 0, io_len);
if (!priv->map) {
printk(KERN_ERR "%s (adm8211): Cannot map device memory\n",
pci_name(pdev));
goto err_free_dev;
}
priv->rx_ring_size = rx_ring_size;
priv->tx_ring_size = tx_ring_size;
if (adm8211_alloc_rings(dev)) {
printk(KERN_ERR "%s (adm8211): Cannot allocate TX/RX ring\n",
pci_name(pdev));
goto err_iounmap;
}
*(__le32 *)perm_addr = cpu_to_le32(ADM8211_CSR_READ(PAR0));
*(__le16 *)&perm_addr[4] =
cpu_to_le16(ADM8211_CSR_READ(PAR1) & 0xFFFF);
if (!is_valid_ether_addr(perm_addr)) {
printk(KERN_WARNING "%s (adm8211): Invalid hwaddr in EEPROM!\n",
pci_name(pdev));
random_ether_addr(perm_addr);
}
SET_IEEE80211_PERM_ADDR(dev, perm_addr);
dev->extra_tx_headroom = sizeof(struct adm8211_tx_hdr);
/* dev->flags = IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */
mac80211: use hardware flags for signal/noise units trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-09 01:15:40 +08:00
dev->flags = IEEE80211_HW_SIGNAL_UNSPEC;
dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
dev->channel_change_time = 1000;
mac80211: use hardware flags for signal/noise units trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-09 01:15:40 +08:00
dev->max_signal = 100; /* FIXME: find better value */
dev->queues = 1; /* ADM8211C supports more, maybe ADM8211B too */
priv->retry_limit = 3;
priv->ant_power = 0x40;
priv->tx_power = 0x40;
priv->lpf_cutoff = 0xFF;
priv->lnags_threshold = 0xFF;
priv->mode = NL80211_IFTYPE_UNSPECIFIED;
/* Power-on issue. EEPROM won't read correctly without */
if (pdev->revision >= ADM8211_REV_BA) {
ADM8211_CSR_WRITE(FRCTL, 0);
ADM8211_CSR_READ(FRCTL);
ADM8211_CSR_WRITE(FRCTL, 1);
ADM8211_CSR_READ(FRCTL);
msleep(100);
}
err = adm8211_read_eeprom(dev);
if (err) {
printk(KERN_ERR "%s (adm8211): Can't alloc eeprom buffer\n",
pci_name(pdev));
goto err_free_desc;
}
priv->channel = 1;
dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
err = ieee80211_register_hw(dev);
if (err) {
printk(KERN_ERR "%s (adm8211): Cannot register device\n",
pci_name(pdev));
goto err_free_eeprom;
}
wiphy_info(dev->wiphy, "hwaddr %pM, Rev 0x%02x\n",
dev->wiphy->perm_addr, pdev->revision);
return 0;
err_free_eeprom:
kfree(priv->eeprom);
err_free_desc:
pci_free_consistent(pdev,
sizeof(struct adm8211_desc) * priv->rx_ring_size +
sizeof(struct adm8211_desc) * priv->tx_ring_size,
priv->rx_ring, priv->rx_ring_dma);
kfree(priv->rx_buffers);
err_iounmap:
pci_iounmap(pdev, priv->map);
err_free_dev:
pci_set_drvdata(pdev, NULL);
ieee80211_free_hw(dev);
err_free_reg:
pci_release_regions(pdev);
err_disable_pdev:
pci_disable_device(pdev);
return err;
}
static void __devexit adm8211_remove(struct pci_dev *pdev)
{
struct ieee80211_hw *dev = pci_get_drvdata(pdev);
struct adm8211_priv *priv;
if (!dev)
return;
ieee80211_unregister_hw(dev);
priv = dev->priv;
pci_free_consistent(pdev,
sizeof(struct adm8211_desc) * priv->rx_ring_size +
sizeof(struct adm8211_desc) * priv->tx_ring_size,
priv->rx_ring, priv->rx_ring_dma);
kfree(priv->rx_buffers);
kfree(priv->eeprom);
pci_iounmap(pdev, priv->map);
pci_release_regions(pdev);
pci_disable_device(pdev);
ieee80211_free_hw(dev);
}
#ifdef CONFIG_PM
static int adm8211_suspend(struct pci_dev *pdev, pm_message_t state)
{
pci_save_state(pdev);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
return 0;
}
static int adm8211_resume(struct pci_dev *pdev)
{
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
return 0;
}
#endif /* CONFIG_PM */
MODULE_DEVICE_TABLE(pci, adm8211_pci_id_table);
/* TODO: implement enable_wake */
static struct pci_driver adm8211_driver = {
.name = "adm8211",
.id_table = adm8211_pci_id_table,
.probe = adm8211_probe,
.remove = __devexit_p(adm8211_remove),
#ifdef CONFIG_PM
.suspend = adm8211_suspend,
.resume = adm8211_resume,
#endif /* CONFIG_PM */
};
static int __init adm8211_init(void)
{
return pci_register_driver(&adm8211_driver);
}
static void __exit adm8211_exit(void)
{
pci_unregister_driver(&adm8211_driver);
}
module_init(adm8211_init);
module_exit(adm8211_exit);