UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/gpu/drm/msm/msm_drv.h

258 lines
8.1 KiB
C
Raw Normal View History

drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
/*
* Copyright (C) 2013 Red Hat
* Author: Rob Clark <robdclark@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __MSM_DRV_H__
#define __MSM_DRV_H__
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <linux/module.h>
drm/msm: use componentised device support Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-03-04 03:19:12 +08:00
#include <linux/component.h>
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/iommu.h>
#include <linux/types.h>
#include <asm/sizes.h>
drm/msm: COMPILE_TEST support With a simple stub, we can get COMPILE_TEST support. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-11-28 05:29:59 +08:00
drm/msm: update for ARCH_MSM -> ARCH_QCOM Architecture rename/split.. ARCH_QCOM is for the non-legacy platforms (ie. device-tree, multiplatform support, etc). Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-05-31 03:37:54 +08:00
#if defined(CONFIG_COMPILE_TEST) && !defined(CONFIG_ARCH_QCOM)
drm/msm: COMPILE_TEST support With a simple stub, we can get COMPILE_TEST support. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-11-28 05:29:59 +08:00
/* stubs we need for compile-test: */
static inline struct device *msm_iommu_get_ctx(const char *ctx_name)
{
return NULL;
}
#endif
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
#ifndef CONFIG_OF
#include <mach/board.h>
#include <mach/socinfo.h>
#include <mach/iommu_domains.h>
#endif
#include <drm/drmP.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_fb_helper.h>
drm/msm: add a3xx gpu support Add initial support for a3xx 3d core. So far, with hardware that I've seen to date, we can have: + zero, one, or two z180 2d cores + a3xx or a2xx 3d core, which share a common CP (the firmware for the CP seems to implement some different PM4 packet types but the basics of cmdstream submission are the same) Which means that the eventual complete "class" hierarchy, once support for all past and present hw is in place, becomes: + msm_gpu + adreno_gpu + a3xx_gpu + a2xx_gpu + z180_gpu This commit splits out the parts that will eventually be common between a2xx/a3xx into adreno_gpu, and the parts that are even common to z180 into msm_gpu. Note that there is no cmdstream validation required. All memory access from the GPU is via IOMMU/MMU. So as long as you don't map silly things to the GPU, there isn't much damage that the GPU can do. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-07-20 00:59:32 +08:00
#include <drm/msm_drm.h>
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
struct msm_kms;
drm/msm: add a3xx gpu support Add initial support for a3xx 3d core. So far, with hardware that I've seen to date, we can have: + zero, one, or two z180 2d cores + a3xx or a2xx 3d core, which share a common CP (the firmware for the CP seems to implement some different PM4 packet types but the basics of cmdstream submission are the same) Which means that the eventual complete "class" hierarchy, once support for all past and present hw is in place, becomes: + msm_gpu + adreno_gpu + a3xx_gpu + a2xx_gpu + z180_gpu This commit splits out the parts that will eventually be common between a2xx/a3xx into adreno_gpu, and the parts that are even common to z180 into msm_gpu. Note that there is no cmdstream validation required. All memory access from the GPU is via IOMMU/MMU. So as long as you don't map silly things to the GPU, there isn't much damage that the GPU can do. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-07-20 00:59:32 +08:00
struct msm_gpu;
drm/msm: add support for non-IOMMU systems Add a VRAM carveout that is used for systems which do not have an IOMMU. The VRAM carveout uses CMA. The arch code must setup a CMA pool for the device (preferrably in highmem.. a 256m-512m VRAM pool in lowmem is not cool). The user can configure the VRAM pool size using msm.vram module param. Technically, the abstraction of IOMMU behind msm_mmu is not strictly needed, but it simplifies the GEM code a bit, and will be useful later when I add support for a2xx devices with GPUMMU, so I decided to keep this part. It appears to be possible to configure the GPU to restrict access to addresses within the VRAM pool, but this is not done yet. So for now the GPU will refuse to load if there is no sort of mmu. Once address based limits are supported and tested to confirm that we aren't giving the GPU access to arbitrary memory, this restriction can be lifted Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-11-17 01:56:06 +08:00
struct msm_mmu;
drm/msm: add rd logging debugfs To ease debugging, add debugfs file which can be cat/tail'd to log submits, along with fence #. If GPU hangs, you can look at 'gpu' debugfs file to find last completed fence and current register state, and compare with logged rd file to narrow down the DRAW_INDX which triggered the GPU hang. Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-05-31 02:47:38 +08:00
struct msm_rd_state;
drm/msm: add perf logging debugfs Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-05-31 02:49:43 +08:00
struct msm_perf_state;
drm/msm: add rd logging debugfs To ease debugging, add debugfs file which can be cat/tail'd to log submits, along with fence #. If GPU hangs, you can look at 'gpu' debugfs file to find last completed fence and current register state, and compare with logged rd file to narrow down the DRAW_INDX which triggered the GPU hang. Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-05-31 02:47:38 +08:00
struct msm_gem_submit;
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
drm/msm: add a3xx gpu support Add initial support for a3xx 3d core. So far, with hardware that I've seen to date, we can have: + zero, one, or two z180 2d cores + a3xx or a2xx 3d core, which share a common CP (the firmware for the CP seems to implement some different PM4 packet types but the basics of cmdstream submission are the same) Which means that the eventual complete "class" hierarchy, once support for all past and present hw is in place, becomes: + msm_gpu + adreno_gpu + a3xx_gpu + a2xx_gpu + z180_gpu This commit splits out the parts that will eventually be common between a2xx/a3xx into adreno_gpu, and the parts that are even common to z180 into msm_gpu. Note that there is no cmdstream validation required. All memory access from the GPU is via IOMMU/MMU. So as long as you don't map silly things to the GPU, there isn't much damage that the GPU can do. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-07-20 00:59:32 +08:00
#define NUM_DOMAINS 2 /* one for KMS, then one per gpu core (?) */
struct msm_file_private {
/* currently we don't do anything useful with this.. but when
* per-context address spaces are supported we'd keep track of
* the context's page-tables here.
*/
int dummy;
};
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
struct msm_drm_private {
struct msm_kms *kms;
drm/msm: use componentised device support Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-03-04 03:19:12 +08:00
/* subordinate devices, if present: */
struct platform_device *hdmi_pdev, *gpu_pdev;
drm/msm: add a3xx gpu support Add initial support for a3xx 3d core. So far, with hardware that I've seen to date, we can have: + zero, one, or two z180 2d cores + a3xx or a2xx 3d core, which share a common CP (the firmware for the CP seems to implement some different PM4 packet types but the basics of cmdstream submission are the same) Which means that the eventual complete "class" hierarchy, once support for all past and present hw is in place, becomes: + msm_gpu + adreno_gpu + a3xx_gpu + a2xx_gpu + z180_gpu This commit splits out the parts that will eventually be common between a2xx/a3xx into adreno_gpu, and the parts that are even common to z180 into msm_gpu. Note that there is no cmdstream validation required. All memory access from the GPU is via IOMMU/MMU. So as long as you don't map silly things to the GPU, there isn't much damage that the GPU can do. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-07-20 00:59:32 +08:00
/* when we have more than one 'msm_gpu' these need to be an array: */
struct msm_gpu *gpu;
struct msm_file_private *lastctx;
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
struct drm_fb_helper *fbdev;
drm/msm: add a3xx gpu support Add initial support for a3xx 3d core. So far, with hardware that I've seen to date, we can have: + zero, one, or two z180 2d cores + a3xx or a2xx 3d core, which share a common CP (the firmware for the CP seems to implement some different PM4 packet types but the basics of cmdstream submission are the same) Which means that the eventual complete "class" hierarchy, once support for all past and present hw is in place, becomes: + msm_gpu + adreno_gpu + a3xx_gpu + a2xx_gpu + z180_gpu This commit splits out the parts that will eventually be common between a2xx/a3xx into adreno_gpu, and the parts that are even common to z180 into msm_gpu. Note that there is no cmdstream validation required. All memory access from the GPU is via IOMMU/MMU. So as long as you don't map silly things to the GPU, there isn't much damage that the GPU can do. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-07-20 00:59:32 +08:00
uint32_t next_fence, completed_fence;
wait_queue_head_t fence_event;
drm/msm: add rd logging debugfs To ease debugging, add debugfs file which can be cat/tail'd to log submits, along with fence #. If GPU hangs, you can look at 'gpu' debugfs file to find last completed fence and current register state, and compare with logged rd file to narrow down the DRAW_INDX which triggered the GPU hang. Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-05-31 02:47:38 +08:00
struct msm_rd_state *rd;
drm/msm: add perf logging debugfs Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-05-31 02:49:43 +08:00
struct msm_perf_state *perf;
drm/msm: add rd logging debugfs To ease debugging, add debugfs file which can be cat/tail'd to log submits, along with fence #. If GPU hangs, you can look at 'gpu' debugfs file to find last completed fence and current register state, and compare with logged rd file to narrow down the DRAW_INDX which triggered the GPU hang. Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-05-31 02:47:38 +08:00
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
/* list of GEM objects: */
struct list_head inactive_list;
struct workqueue_struct *wq;
drm/msm: rework inactive-work Re-arrange things a bit so that we can get work requested after a bo fence passes, like pageflip, done before retiring bo's. Without any sort of bo cache in userspace, some games can trigger hundred's of transient bo's, which can cause retire to take a long time (5-10ms). Obviously we want a bo cache.. but this cleanup will make things a bit easier for atomic as well and makes things a bit cleaner. Signed-off-by: Rob Clark <robdclark@gmail.com> Acked-by: David Brown <davidb@codeaurora.org>
2013-09-15 02:01:55 +08:00
/* callbacks deferred until bo is inactive: */
struct list_head fence_cbs;
drm/msm: add support for non-IOMMU systems Add a VRAM carveout that is used for systems which do not have an IOMMU. The VRAM carveout uses CMA. The arch code must setup a CMA pool for the device (preferrably in highmem.. a 256m-512m VRAM pool in lowmem is not cool). The user can configure the VRAM pool size using msm.vram module param. Technically, the abstraction of IOMMU behind msm_mmu is not strictly needed, but it simplifies the GEM code a bit, and will be useful later when I add support for a2xx devices with GPUMMU, so I decided to keep this part. It appears to be possible to configure the GPU to restrict access to addresses within the VRAM pool, but this is not done yet. So for now the GPU will refuse to load if there is no sort of mmu. Once address based limits are supported and tested to confirm that we aren't giving the GPU access to arbitrary memory, this restriction can be lifted Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-11-17 01:56:06 +08:00
/* registered MMUs: */
unsigned int num_mmus;
struct msm_mmu *mmus[NUM_DOMAINS];
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
drm/msm: add plane support Enable using VG1 and VG2 for planes. Currently YUV/CSC or scaling is not enabled, but ARGB and xRGB blending is. Signed-off-by: Rob Clark <robdclark@gmail.com> Acked-by: David Brown <davidb@codeaurora.org>
2013-10-09 00:57:48 +08:00
unsigned int num_planes;
struct drm_plane *planes[8];
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
unsigned int num_crtcs;
struct drm_crtc *crtcs[8];
unsigned int num_encoders;
struct drm_encoder *encoders[8];
drm/msm: convert to drm_bridge Drop the msm_connector base class, and special calls to base class methods from the encoder, and use instead drm_bridge. This allows for a cleaner division between the hdmi (and in future dsi) blocks, from the mdp block. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-31 01:02:15 +08:00
unsigned int num_bridges;
struct drm_bridge *bridges[8];
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
unsigned int num_connectors;
struct drm_connector *connectors[8];
drm/msm: add support for non-IOMMU systems Add a VRAM carveout that is used for systems which do not have an IOMMU. The VRAM carveout uses CMA. The arch code must setup a CMA pool for the device (preferrably in highmem.. a 256m-512m VRAM pool in lowmem is not cool). The user can configure the VRAM pool size using msm.vram module param. Technically, the abstraction of IOMMU behind msm_mmu is not strictly needed, but it simplifies the GEM code a bit, and will be useful later when I add support for a2xx devices with GPUMMU, so I decided to keep this part. It appears to be possible to configure the GPU to restrict access to addresses within the VRAM pool, but this is not done yet. So for now the GPU will refuse to load if there is no sort of mmu. Once address based limits are supported and tested to confirm that we aren't giving the GPU access to arbitrary memory, this restriction can be lifted Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-11-17 01:56:06 +08:00
/* VRAM carveout, used when no IOMMU: */
struct {
unsigned long size;
dma_addr_t paddr;
/* NOTE: mm managed at the page level, size is in # of pages
* and position mm_node->start is in # of pages:
*/
struct drm_mm mm;
} vram;
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
};
struct msm_format {
uint32_t pixel_format;
};
drm/msm: rework inactive-work Re-arrange things a bit so that we can get work requested after a bo fence passes, like pageflip, done before retiring bo's. Without any sort of bo cache in userspace, some games can trigger hundred's of transient bo's, which can cause retire to take a long time (5-10ms). Obviously we want a bo cache.. but this cleanup will make things a bit easier for atomic as well and makes things a bit cleaner. Signed-off-by: Rob Clark <robdclark@gmail.com> Acked-by: David Brown <davidb@codeaurora.org>
2013-09-15 02:01:55 +08:00
/* callback from wq once fence has passed: */
struct msm_fence_cb {
struct work_struct work;
uint32_t fence;
void (*func)(struct msm_fence_cb *cb);
};
void __msm_fence_worker(struct work_struct *work);
#define INIT_FENCE_CB(_cb, _func) do { \
INIT_WORK(&(_cb)->work, __msm_fence_worker); \
(_cb)->func = _func; \
} while (0)
drm/msm: add support for non-IOMMU systems Add a VRAM carveout that is used for systems which do not have an IOMMU. The VRAM carveout uses CMA. The arch code must setup a CMA pool for the device (preferrably in highmem.. a 256m-512m VRAM pool in lowmem is not cool). The user can configure the VRAM pool size using msm.vram module param. Technically, the abstraction of IOMMU behind msm_mmu is not strictly needed, but it simplifies the GEM code a bit, and will be useful later when I add support for a2xx devices with GPUMMU, so I decided to keep this part. It appears to be possible to configure the GPU to restrict access to addresses within the VRAM pool, but this is not done yet. So for now the GPU will refuse to load if there is no sort of mmu. Once address based limits are supported and tested to confirm that we aren't giving the GPU access to arbitrary memory, this restriction can be lifted Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-11-17 01:56:06 +08:00
int msm_register_mmu(struct drm_device *dev, struct msm_mmu *mmu);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
drm/msm: add a3xx gpu support Add initial support for a3xx 3d core. So far, with hardware that I've seen to date, we can have: + zero, one, or two z180 2d cores + a3xx or a2xx 3d core, which share a common CP (the firmware for the CP seems to implement some different PM4 packet types but the basics of cmdstream submission are the same) Which means that the eventual complete "class" hierarchy, once support for all past and present hw is in place, becomes: + msm_gpu + adreno_gpu + a3xx_gpu + a2xx_gpu + z180_gpu This commit splits out the parts that will eventually be common between a2xx/a3xx into adreno_gpu, and the parts that are even common to z180 into msm_gpu. Note that there is no cmdstream validation required. All memory access from the GPU is via IOMMU/MMU. So as long as you don't map silly things to the GPU, there isn't much damage that the GPU can do. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-07-20 00:59:32 +08:00
int msm_wait_fence_interruptable(struct drm_device *dev, uint32_t fence,
struct timespec *timeout);
void msm_update_fence(struct drm_device *dev, uint32_t fence);
int msm_ioctl_gem_submit(struct drm_device *dev, void *data,
struct drm_file *file);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
int msm_gem_mmap(struct file *filp, struct vm_area_struct *vma);
int msm_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
uint64_t msm_gem_mmap_offset(struct drm_gem_object *obj);
int msm_gem_get_iova_locked(struct drm_gem_object *obj, int id,
uint32_t *iova);
int msm_gem_get_iova(struct drm_gem_object *obj, int id, uint32_t *iova);
drm/msm: prime support Signed-off-by: Rob Clark <robdclark@gmail.com> Acked-by: David Brown <davidb@codeaurora.org>
2013-09-28 23:28:35 +08:00
struct page **msm_gem_get_pages(struct drm_gem_object *obj);
void msm_gem_put_pages(struct drm_gem_object *obj);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
void msm_gem_put_iova(struct drm_gem_object *obj, int id);
int msm_gem_dumb_create(struct drm_file *file, struct drm_device *dev,
struct drm_mode_create_dumb *args);
int msm_gem_dumb_map_offset(struct drm_file *file, struct drm_device *dev,
uint32_t handle, uint64_t *offset);
drm/msm: prime support Signed-off-by: Rob Clark <robdclark@gmail.com> Acked-by: David Brown <davidb@codeaurora.org>
2013-09-28 23:28:35 +08:00
struct sg_table *msm_gem_prime_get_sg_table(struct drm_gem_object *obj);
void *msm_gem_prime_vmap(struct drm_gem_object *obj);
void msm_gem_prime_vunmap(struct drm_gem_object *obj, void *vaddr);
struct drm_gem_object *msm_gem_prime_import_sg_table(struct drm_device *dev,
size_t size, struct sg_table *sg);
int msm_gem_prime_pin(struct drm_gem_object *obj);
void msm_gem_prime_unpin(struct drm_gem_object *obj);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
void *msm_gem_vaddr_locked(struct drm_gem_object *obj);
void *msm_gem_vaddr(struct drm_gem_object *obj);
drm/msm: rework inactive-work Re-arrange things a bit so that we can get work requested after a bo fence passes, like pageflip, done before retiring bo's. Without any sort of bo cache in userspace, some games can trigger hundred's of transient bo's, which can cause retire to take a long time (5-10ms). Obviously we want a bo cache.. but this cleanup will make things a bit easier for atomic as well and makes things a bit cleaner. Signed-off-by: Rob Clark <robdclark@gmail.com> Acked-by: David Brown <davidb@codeaurora.org>
2013-09-15 02:01:55 +08:00
int msm_gem_queue_inactive_cb(struct drm_gem_object *obj,
struct msm_fence_cb *cb);
drm/msm: add a3xx gpu support Add initial support for a3xx 3d core. So far, with hardware that I've seen to date, we can have: + zero, one, or two z180 2d cores + a3xx or a2xx 3d core, which share a common CP (the firmware for the CP seems to implement some different PM4 packet types but the basics of cmdstream submission are the same) Which means that the eventual complete "class" hierarchy, once support for all past and present hw is in place, becomes: + msm_gpu + adreno_gpu + a3xx_gpu + a2xx_gpu + z180_gpu This commit splits out the parts that will eventually be common between a2xx/a3xx into adreno_gpu, and the parts that are even common to z180 into msm_gpu. Note that there is no cmdstream validation required. All memory access from the GPU is via IOMMU/MMU. So as long as you don't map silly things to the GPU, there isn't much damage that the GPU can do. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-07-20 00:59:32 +08:00
void msm_gem_move_to_active(struct drm_gem_object *obj,
drm/msm: handle read vs write fences The userspace API already had everything needed to handle read vs write synchronization. This patch actually bothers to hook it up properly, so that we don't need to (for example) stall on userspace read access to a buffer that gpu is also still reading. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-09-02 01:25:09 +08:00
struct msm_gpu *gpu, bool write, uint32_t fence);
drm/msm: add a3xx gpu support Add initial support for a3xx 3d core. So far, with hardware that I've seen to date, we can have: + zero, one, or two z180 2d cores + a3xx or a2xx 3d core, which share a common CP (the firmware for the CP seems to implement some different PM4 packet types but the basics of cmdstream submission are the same) Which means that the eventual complete "class" hierarchy, once support for all past and present hw is in place, becomes: + msm_gpu + adreno_gpu + a3xx_gpu + a2xx_gpu + z180_gpu This commit splits out the parts that will eventually be common between a2xx/a3xx into adreno_gpu, and the parts that are even common to z180 into msm_gpu. Note that there is no cmdstream validation required. All memory access from the GPU is via IOMMU/MMU. So as long as you don't map silly things to the GPU, there isn't much damage that the GPU can do. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-07-20 00:59:32 +08:00
void msm_gem_move_to_inactive(struct drm_gem_object *obj);
int msm_gem_cpu_prep(struct drm_gem_object *obj, uint32_t op,
struct timespec *timeout);
int msm_gem_cpu_fini(struct drm_gem_object *obj);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
void msm_gem_free_object(struct drm_gem_object *obj);
int msm_gem_new_handle(struct drm_device *dev, struct drm_file *file,
uint32_t size, uint32_t flags, uint32_t *handle);
struct drm_gem_object *msm_gem_new(struct drm_device *dev,
uint32_t size, uint32_t flags);
drm/msm: prime support Signed-off-by: Rob Clark <robdclark@gmail.com> Acked-by: David Brown <davidb@codeaurora.org>
2013-09-28 23:28:35 +08:00
struct drm_gem_object *msm_gem_import(struct drm_device *dev,
uint32_t size, struct sg_table *sgt);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
struct drm_gem_object *msm_framebuffer_bo(struct drm_framebuffer *fb, int plane);
const struct msm_format *msm_framebuffer_format(struct drm_framebuffer *fb);
struct drm_framebuffer *msm_framebuffer_init(struct drm_device *dev,
struct drm_mode_fb_cmd2 *mode_cmd, struct drm_gem_object **bos);
struct drm_framebuffer *msm_framebuffer_create(struct drm_device *dev,
struct drm_file *file, struct drm_mode_fb_cmd2 *mode_cmd);
struct drm_fb_helper *msm_fbdev_init(struct drm_device *dev);
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
struct hdmi;
struct hdmi *hdmi_init(struct drm_device *dev, struct drm_encoder *encoder);
irqreturn_t hdmi_irq(int irq, void *dev_id);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
void __init hdmi_register(void);
void __exit hdmi_unregister(void);
#ifdef CONFIG_DEBUG_FS
void msm_gem_describe(struct drm_gem_object *obj, struct seq_file *m);
void msm_gem_describe_objects(struct list_head *list, struct seq_file *m);
void msm_framebuffer_describe(struct drm_framebuffer *fb, struct seq_file *m);
drm/msm: add rd logging debugfs To ease debugging, add debugfs file which can be cat/tail'd to log submits, along with fence #. If GPU hangs, you can look at 'gpu' debugfs file to find last completed fence and current register state, and compare with logged rd file to narrow down the DRAW_INDX which triggered the GPU hang. Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-05-31 02:47:38 +08:00
int msm_debugfs_late_init(struct drm_device *dev);
int msm_rd_debugfs_init(struct drm_minor *minor);
void msm_rd_debugfs_cleanup(struct drm_minor *minor);
void msm_rd_dump_submit(struct msm_gem_submit *submit);
drm/msm: add perf logging debugfs Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-05-31 02:49:43 +08:00
int msm_perf_debugfs_init(struct drm_minor *minor);
void msm_perf_debugfs_cleanup(struct drm_minor *minor);
drm/msm: add rd logging debugfs To ease debugging, add debugfs file which can be cat/tail'd to log submits, along with fence #. If GPU hangs, you can look at 'gpu' debugfs file to find last completed fence and current register state, and compare with logged rd file to narrow down the DRAW_INDX which triggered the GPU hang. Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-05-31 02:47:38 +08:00
#else
static inline int msm_debugfs_late_init(struct drm_device *dev) { return 0; }
static inline void msm_rd_dump_submit(struct msm_gem_submit *submit) {}
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
#endif
void __iomem *msm_ioremap(struct platform_device *pdev, const char *name,
const char *dbgname);
void msm_writel(u32 data, void __iomem *addr);
u32 msm_readl(const void __iomem *addr);
#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
#define VERB(fmt, ...) if (0) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
drm/msm: return -EBUSY if bo still active When we CPU_PREP a bo with NOSYNC flag (for example, to implement PIPE_TRANSFER_DISCARD_WHOLE_RESOURCE), an -EBUSY return indicates to userspace that the bo is still busy. Previously it was incorrectly returning 0 in this case. And while we're in there throw in an bit of extra sanity checking in case userspace tries to wait for a bogus fence. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-09-12 05:34:07 +08:00
static inline bool fence_completed(struct drm_device *dev, uint32_t fence)
{
struct msm_drm_private *priv = dev->dev_private;
return priv->completed_fence >= fence;
}
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
static inline int align_pitch(int width, int bpp)
{
int bytespp = (bpp + 7) / 8;
/* adreno needs pitch aligned to 32 pixels: */
return bytespp * ALIGN(width, 32);
}
/* for the generated headers: */
#define INVALID_IDX(idx) ({BUG(); 0;})
drm/msm: add a3xx gpu support Add initial support for a3xx 3d core. So far, with hardware that I've seen to date, we can have: + zero, one, or two z180 2d cores + a3xx or a2xx 3d core, which share a common CP (the firmware for the CP seems to implement some different PM4 packet types but the basics of cmdstream submission are the same) Which means that the eventual complete "class" hierarchy, once support for all past and present hw is in place, becomes: + msm_gpu + adreno_gpu + a3xx_gpu + a2xx_gpu + z180_gpu This commit splits out the parts that will eventually be common between a2xx/a3xx into adreno_gpu, and the parts that are even common to z180 into msm_gpu. Note that there is no cmdstream validation required. All memory access from the GPU is via IOMMU/MMU. So as long as you don't map silly things to the GPU, there isn't much damage that the GPU can do. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-07-20 00:59:32 +08:00
#define fui(x) ({BUG(); 0;})
#define util_float_to_half(x) ({BUG(); 0;})
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
#define FIELD(val, name) (((val) & name ## __MASK) >> name ## __SHIFT)
/* for conditionally setting boolean flag(s): */
#define COND(bool, val) ((bool) ? (val) : 0)
#endif /* __MSM_DRV_H__ */