OpenCloudOS-Kernel/drivers/gpu/drm/i915/i915_gem.h

98 lines
3.0 KiB
C
Raw Normal View History

/*
* Copyright © 2016 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
*/
#ifndef __I915_GEM_H__
#define __I915_GEM_H__
drm/i915: Squash repeated awaits on the same fence Track the latest fence waited upon on each context, and only add a new asynchronous wait if the new fence is more recent than the recorded fence for that context. This requires us to filter out unordered timelines, which are noted by DMA_FENCE_NO_CONTEXT. However, in the absence of a universal identifier, we have to use our own i915->mm.unordered_timeline token. v2: Throw around the debug crutches v3: Inline the likely case of the pre-allocation cache being full. v4: Drop the pre-allocation support, we can lose the most recent fence in case of allocation failure -- it just means we may emit more awaits than strictly necessary but will not break. v5: Trim allocation size for leaf nodes, they only need an array of u32 not pointers. v6: Create mock_timeline to tidy selftest writing v7: s/intel_timeline_sync_get/intel_timeline_sync_is_later/ (Tvrtko) v8: Prune the stale sync points when we idle. v9: Include a small benchmark in the kselftests v10: Separate the idr implementation into its own compartment. (Tvrkto) v11: Refactor igt_sync kselftests to avoid deep nesting (Tvrkto) v12: __sync_leaf_idx() to assert that p->height is 0 when checking leaves v13: kselftests to investigate struct i915_syncmap itself (Tvrtko) v14: Foray into ascii art graphs v15: Take into account that the random lookup/insert does 2 prng calls, not 1, when benchmarking, and use for_each_set_bit() (Tvrtko) v16: Improved ascii art Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-4-chris@chris-wilson.co.uk
2017-05-03 17:39:21 +08:00
#include <linux/bug.h>
#include <linux/interrupt.h>
drm/i915: Squash repeated awaits on the same fence Track the latest fence waited upon on each context, and only add a new asynchronous wait if the new fence is more recent than the recorded fence for that context. This requires us to filter out unordered timelines, which are noted by DMA_FENCE_NO_CONTEXT. However, in the absence of a universal identifier, we have to use our own i915->mm.unordered_timeline token. v2: Throw around the debug crutches v3: Inline the likely case of the pre-allocation cache being full. v4: Drop the pre-allocation support, we can lose the most recent fence in case of allocation failure -- it just means we may emit more awaits than strictly necessary but will not break. v5: Trim allocation size for leaf nodes, they only need an array of u32 not pointers. v6: Create mock_timeline to tidy selftest writing v7: s/intel_timeline_sync_get/intel_timeline_sync_is_later/ (Tvrtko) v8: Prune the stale sync points when we idle. v9: Include a small benchmark in the kselftests v10: Separate the idr implementation into its own compartment. (Tvrkto) v11: Refactor igt_sync kselftests to avoid deep nesting (Tvrkto) v12: __sync_leaf_idx() to assert that p->height is 0 when checking leaves v13: kselftests to investigate struct i915_syncmap itself (Tvrtko) v14: Foray into ascii art graphs v15: Take into account that the random lookup/insert does 2 prng calls, not 1, when benchmarking, and use for_each_set_bit() (Tvrtko) v16: Improved ascii art Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-4-chris@chris-wilson.co.uk
2017-05-03 17:39:21 +08:00
struct drm_i915_private;
#ifdef CONFIG_DRM_I915_DEBUG_GEM
#define GEM_SHOW_DEBUG() (drm_debug & DRM_UT_DRIVER)
#define GEM_BUG_ON(condition) do { if (unlikely((condition))) { \
pr_err("%s:%d GEM_BUG_ON(%s)\n", \
__func__, __LINE__, __stringify(condition)); \
GEM_TRACE("%s:%d GEM_BUG_ON(%s)\n", \
__func__, __LINE__, __stringify(condition)); \
BUG(); \
} \
} while(0)
#define GEM_WARN_ON(expr) WARN_ON(expr)
#define GEM_DEBUG_DECL(var) var
#define GEM_DEBUG_EXEC(expr) expr
#define GEM_DEBUG_BUG_ON(expr) GEM_BUG_ON(expr)
drm/i915: GEM_WARN_ON considered harmful GEM_WARN_ON currently has dangerous semantics where it is completely compiled out on !GEM_DEBUG builds. This can leave users who expect it to be more like a WARN_ON, just without a warning in non-debug builds, in complete ignorance. Another gotcha with it is that it cannot be used as a statement. Which is again different from a standard kernel WARN_ON. This patch fixes both problems by making it behave as one would expect. It can now be used both as an expression and as statement, and also the condition evaluates properly in all builds - code under the conditional will therefore not unexpectedly disappear. To satisfy call sites which really want the code under the conditional to completely disappear, we add GEM_DEBUG_WARN_ON and convert some of the callers to it. This one can also be used as both expression and statement. >From the above it follows GEM_DEBUG_WARN_ON should be used in situations where we are certain the condition will be hit during development, but at a place in code where error can be handled to the benefit of not crashing the machine. GEM_WARN_ON on the other hand should be used where condition may happen in production and we just want to distinguish the level of debugging output emitted between the production and debug build. v2: * Dropped BUG_ON hunk. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Reviewed-by: Tomasz Lis <tomasz.lis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181012063142.16080-1-tvrtko.ursulin@linux.intel.com
2018-10-12 14:31:42 +08:00
#define GEM_DEBUG_WARN_ON(expr) GEM_WARN_ON(expr)
#else
#define GEM_SHOW_DEBUG() (0)
#define GEM_BUG_ON(expr) BUILD_BUG_ON_INVALID(expr)
drm/i915: GEM_WARN_ON considered harmful GEM_WARN_ON currently has dangerous semantics where it is completely compiled out on !GEM_DEBUG builds. This can leave users who expect it to be more like a WARN_ON, just without a warning in non-debug builds, in complete ignorance. Another gotcha with it is that it cannot be used as a statement. Which is again different from a standard kernel WARN_ON. This patch fixes both problems by making it behave as one would expect. It can now be used both as an expression and as statement, and also the condition evaluates properly in all builds - code under the conditional will therefore not unexpectedly disappear. To satisfy call sites which really want the code under the conditional to completely disappear, we add GEM_DEBUG_WARN_ON and convert some of the callers to it. This one can also be used as both expression and statement. >From the above it follows GEM_DEBUG_WARN_ON should be used in situations where we are certain the condition will be hit during development, but at a place in code where error can be handled to the benefit of not crashing the machine. GEM_WARN_ON on the other hand should be used where condition may happen in production and we just want to distinguish the level of debugging output emitted between the production and debug build. v2: * Dropped BUG_ON hunk. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Reviewed-by: Tomasz Lis <tomasz.lis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181012063142.16080-1-tvrtko.ursulin@linux.intel.com
2018-10-12 14:31:42 +08:00
#define GEM_WARN_ON(expr) ({ unlikely(!!(expr)); })
#define GEM_DEBUG_DECL(var)
#define GEM_DEBUG_EXEC(expr) do { } while (0)
#define GEM_DEBUG_BUG_ON(expr)
drm/i915: GEM_WARN_ON considered harmful GEM_WARN_ON currently has dangerous semantics where it is completely compiled out on !GEM_DEBUG builds. This can leave users who expect it to be more like a WARN_ON, just without a warning in non-debug builds, in complete ignorance. Another gotcha with it is that it cannot be used as a statement. Which is again different from a standard kernel WARN_ON. This patch fixes both problems by making it behave as one would expect. It can now be used both as an expression and as statement, and also the condition evaluates properly in all builds - code under the conditional will therefore not unexpectedly disappear. To satisfy call sites which really want the code under the conditional to completely disappear, we add GEM_DEBUG_WARN_ON and convert some of the callers to it. This one can also be used as both expression and statement. >From the above it follows GEM_DEBUG_WARN_ON should be used in situations where we are certain the condition will be hit during development, but at a place in code where error can be handled to the benefit of not crashing the machine. GEM_WARN_ON on the other hand should be used where condition may happen in production and we just want to distinguish the level of debugging output emitted between the production and debug build. v2: * Dropped BUG_ON hunk. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Reviewed-by: Tomasz Lis <tomasz.lis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181012063142.16080-1-tvrtko.ursulin@linux.intel.com
2018-10-12 14:31:42 +08:00
#define GEM_DEBUG_WARN_ON(expr) ({ BUILD_BUG_ON_INVALID(expr); 0; })
#endif
drm/i915: Use trace_printk to provide a death rattle for GEM Trying to enable printk debugging for GEM is fraught with the issue of spam; interactions with HW are very frequent and often boring. However, one instance where they are not so boring is just before a BUG; here ftrace provides a facility to dump its ringbuffer on an oops. So for CI let's enable trace_printk() to capture the last exchanges with HW as a death rattle. For example, [ 79.234110] ------------[ cut here ]------------ [ 79.234137] kernel BUG at drivers/gpu/drm/i915/intel_lrc.c:907! [ 79.234145] invalid opcode: 0000 [#1] SMP [ 79.234153] Dumping ftrace buffer: [ 79.234158] --------------------------------- ... [ 79.314044] gem_conc-1059 1..s1 79203443us : intel_lrc_irq_handler: bcs0 out[0]: ctx=5.2, seqno=145 [ 79.314089] gem_conc-1059 1..s. 79220800us : intel_lrc_irq_handler: bcs0 csb[1/1]: status=0x00000018:0x00000005 [ 79.314133] gem_conc-1059 1..s. 79220803us : intel_lrc_irq_handler: bcs0 out[0]: ctx=5.1, seqno=145 [ 79.314177] gem_conc-1062 2..s1 79230458us : intel_lrc_irq_handler: bcs0 in[0]: ctx=8.1, seqno=146 [ 79.314220] gem_conc-1062 2..s1 79230515us : intel_lrc_irq_handler: bcs0 in[0]: ctx=8.2, seqno=147 [ 79.314265] gem_conc-1059 1..s1 79230951us : intel_lrc_irq_handler: bcs0 csb[2/3]: status=0x00000012:0x00000008 [ 79.314309] gem_conc-1059 1..s1 79230954us : intel_lrc_irq_handler: bcs0 out[0]: ctx=8.2, seqno=147 [ 79.314353] gem_conc-1059 1..s1 79230954us : intel_lrc_irq_handler: bcs0 csb[3/3]: status=0x00008002:0x00000008 [ 79.314396] gem_conc-1059 1..s1 79230955us : intel_lrc_irq_handler: bcs0 out[0]: ctx=8.1, seqno=147 [ 79.314402] --------------------------------- v2: Tweak the formatting to be more consistent between in/out. v3: do {} while (0) stub macro protection Suggested-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171109143019.16568-1-chris@chris-wilson.co.uk
2017-11-09 22:30:19 +08:00
#if IS_ENABLED(CONFIG_DRM_I915_TRACE_GEM)
#define GEM_TRACE(...) trace_printk(__VA_ARGS__)
#define GEM_TRACE_DUMP() ftrace_dump(DUMP_ALL)
2018-05-24 16:11:35 +08:00
#define GEM_TRACE_DUMP_ON(expr) \
do { if (expr) ftrace_dump(DUMP_ALL); } while (0)
drm/i915: Use trace_printk to provide a death rattle for GEM Trying to enable printk debugging for GEM is fraught with the issue of spam; interactions with HW are very frequent and often boring. However, one instance where they are not so boring is just before a BUG; here ftrace provides a facility to dump its ringbuffer on an oops. So for CI let's enable trace_printk() to capture the last exchanges with HW as a death rattle. For example, [ 79.234110] ------------[ cut here ]------------ [ 79.234137] kernel BUG at drivers/gpu/drm/i915/intel_lrc.c:907! [ 79.234145] invalid opcode: 0000 [#1] SMP [ 79.234153] Dumping ftrace buffer: [ 79.234158] --------------------------------- ... [ 79.314044] gem_conc-1059 1..s1 79203443us : intel_lrc_irq_handler: bcs0 out[0]: ctx=5.2, seqno=145 [ 79.314089] gem_conc-1059 1..s. 79220800us : intel_lrc_irq_handler: bcs0 csb[1/1]: status=0x00000018:0x00000005 [ 79.314133] gem_conc-1059 1..s. 79220803us : intel_lrc_irq_handler: bcs0 out[0]: ctx=5.1, seqno=145 [ 79.314177] gem_conc-1062 2..s1 79230458us : intel_lrc_irq_handler: bcs0 in[0]: ctx=8.1, seqno=146 [ 79.314220] gem_conc-1062 2..s1 79230515us : intel_lrc_irq_handler: bcs0 in[0]: ctx=8.2, seqno=147 [ 79.314265] gem_conc-1059 1..s1 79230951us : intel_lrc_irq_handler: bcs0 csb[2/3]: status=0x00000012:0x00000008 [ 79.314309] gem_conc-1059 1..s1 79230954us : intel_lrc_irq_handler: bcs0 out[0]: ctx=8.2, seqno=147 [ 79.314353] gem_conc-1059 1..s1 79230954us : intel_lrc_irq_handler: bcs0 csb[3/3]: status=0x00008002:0x00000008 [ 79.314396] gem_conc-1059 1..s1 79230955us : intel_lrc_irq_handler: bcs0 out[0]: ctx=8.1, seqno=147 [ 79.314402] --------------------------------- v2: Tweak the formatting to be more consistent between in/out. v3: do {} while (0) stub macro protection Suggested-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171109143019.16568-1-chris@chris-wilson.co.uk
2017-11-09 22:30:19 +08:00
#else
#define GEM_TRACE(...) do { } while (0)
#define GEM_TRACE_DUMP() do { } while (0)
2018-05-24 16:11:35 +08:00
#define GEM_TRACE_DUMP_ON(expr) BUILD_BUG_ON_INVALID(expr)
drm/i915: Use trace_printk to provide a death rattle for GEM Trying to enable printk debugging for GEM is fraught with the issue of spam; interactions with HW are very frequent and often boring. However, one instance where they are not so boring is just before a BUG; here ftrace provides a facility to dump its ringbuffer on an oops. So for CI let's enable trace_printk() to capture the last exchanges with HW as a death rattle. For example, [ 79.234110] ------------[ cut here ]------------ [ 79.234137] kernel BUG at drivers/gpu/drm/i915/intel_lrc.c:907! [ 79.234145] invalid opcode: 0000 [#1] SMP [ 79.234153] Dumping ftrace buffer: [ 79.234158] --------------------------------- ... [ 79.314044] gem_conc-1059 1..s1 79203443us : intel_lrc_irq_handler: bcs0 out[0]: ctx=5.2, seqno=145 [ 79.314089] gem_conc-1059 1..s. 79220800us : intel_lrc_irq_handler: bcs0 csb[1/1]: status=0x00000018:0x00000005 [ 79.314133] gem_conc-1059 1..s. 79220803us : intel_lrc_irq_handler: bcs0 out[0]: ctx=5.1, seqno=145 [ 79.314177] gem_conc-1062 2..s1 79230458us : intel_lrc_irq_handler: bcs0 in[0]: ctx=8.1, seqno=146 [ 79.314220] gem_conc-1062 2..s1 79230515us : intel_lrc_irq_handler: bcs0 in[0]: ctx=8.2, seqno=147 [ 79.314265] gem_conc-1059 1..s1 79230951us : intel_lrc_irq_handler: bcs0 csb[2/3]: status=0x00000012:0x00000008 [ 79.314309] gem_conc-1059 1..s1 79230954us : intel_lrc_irq_handler: bcs0 out[0]: ctx=8.2, seqno=147 [ 79.314353] gem_conc-1059 1..s1 79230954us : intel_lrc_irq_handler: bcs0 csb[3/3]: status=0x00008002:0x00000008 [ 79.314396] gem_conc-1059 1..s1 79230955us : intel_lrc_irq_handler: bcs0 out[0]: ctx=8.1, seqno=147 [ 79.314402] --------------------------------- v2: Tweak the formatting to be more consistent between in/out. v3: do {} while (0) stub macro protection Suggested-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171109143019.16568-1-chris@chris-wilson.co.uk
2017-11-09 22:30:19 +08:00
#endif
#define I915_GEM_IDLE_TIMEOUT (HZ / 5)
void i915_gem_park(struct drm_i915_private *i915);
void i915_gem_unpark(struct drm_i915_private *i915);
static inline void __tasklet_disable_sync_once(struct tasklet_struct *t)
{
drm/i915: Always kick the execlists tasklet after reset With direct submission being disabled while the reset in progress, we have a small window where we may forgo the submission of a new request and not notice its addition during execlists_reset_finish. To close this window, always schedule the submission tasklet on coming out of reset to catch any residual work. <6> [333.144082] i915: Running intel_hangcheck_live_selftests/igt_reset_engines <3> [333.296927] i915_reset_engine(rcs0:idle): failed to idle after reset <6> [333.296932] i915 0000:00:02.0: [drm] rcs0 <6> [333.296934] i915 0000:00:02.0: [drm] Hangcheck 0:a9ddf7a5 [4157 ms] <6> [333.296936] i915 0000:00:02.0: [drm] Reset count: 36048 (global 754) <6> [333.296938] i915 0000:00:02.0: [drm] Requests: <6> [333.296997] i915 0000:00:02.0: [drm] RING_START: 0x00000000 <6> [333.296999] i915 0000:00:02.0: [drm] RING_HEAD: 0x00000000 <6> [333.297001] i915 0000:00:02.0: [drm] RING_TAIL: 0x00000000 <6> [333.297003] i915 0000:00:02.0: [drm] RING_CTL: 0x00000000 <6> [333.297005] i915 0000:00:02.0: [drm] RING_MODE: 0x00000200 [idle] <6> [333.297007] i915 0000:00:02.0: [drm] RING_IMR: fffffeff <6> [333.297010] i915 0000:00:02.0: [drm] ACTHD: 0x00000000_00000000 <6> [333.297012] i915 0000:00:02.0: [drm] BBADDR: 0x00000000_00000000 <6> [333.297015] i915 0000:00:02.0: [drm] DMA_FADDR: 0x00000000_00000000 <6> [333.297017] i915 0000:00:02.0: [drm] IPEIR: 0x00000000 <6> [333.297019] i915 0000:00:02.0: [drm] IPEHR: 0x00000000 <6> [333.297021] i915 0000:00:02.0: [drm] Execlist status: 0x00000001 00000000 <6> [333.297023] i915 0000:00:02.0: [drm] Execlist CSB read 5, write 5 [mmio:7], tasklet queued? no (enabled) <6> [333.297025] i915 0000:00:02.0: [drm] ELSP[0] idle <6> [333.297027] i915 0000:00:02.0: [drm] ELSP[1] idle <6> [333.297028] i915 0000:00:02.0: [drm] HW active? 0x0 <6> [333.297044] i915 0000:00:02.0: [drm] Queue priority hint: -8186 <6> [333.297067] i915 0000:00:02.0: [drm] Q 2afac:5f2+ prio=-8186 @ 50ms: (null) <6> [333.297068] i915 0000:00:02.0: [drm] HWSP: <6> [333.297071] i915 0000:00:02.0: [drm] [0000] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <6> [333.297073] i915 0000:00:02.0: [drm] * <6> [333.297075] i915 0000:00:02.0: [drm] [0040] 00000001 00000000 00000018 00000002 00000001 00000000 00000018 00000000 <6> [333.297077] i915 0000:00:02.0: [drm] [0060] 00000001 00000000 00008002 00000002 00000000 00000000 00000000 00000005 <6> [333.297079] i915 0000:00:02.0: [drm] [0080] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <6> [333.297081] i915 0000:00:02.0: [drm] * <6> [333.297083] i915 0000:00:02.0: [drm] [00c0] 00000000 00000000 00000000 00000000 a9ddf7a5 00000000 00000000 00000000 <6> [333.297085] i915 0000:00:02.0: [drm] [00e0] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <6> [333.297087] i915 0000:00:02.0: [drm] * <6> [333.297089] i915 0000:00:02.0: [drm] Idle? no <6> [333.297090] i915_reset_engine(rcs0:idle): 3000 resets <3> [333.297092] i915/intel_hangcheck_live_selftests: igt_reset_engines failed with error -5 <3> [333.455460] i915 0000:00:02.0: Failed to idle engines, declaring wedged! ... <0> [333.491294] i915_sel-4916 1.... 333262143us : i915_reset_engine: rcs0 flags=4 <0> [333.491328] i915_sel-4916 1.... 333262143us : execlists_reset_prepare: rcs0: depth<-0 <0> [333.491362] i915_sel-4916 1.... 333262143us : intel_engine_stop_cs: rcs0 <0> [333.491396] i915_sel-4916 1d..1 333262144us : process_csb: rcs0 cs-irq head=5, tail=5 <0> [333.491424] i915_sel-4916 1.... 333262145us : intel_gpu_reset: engine_mask=1 <0> [333.491454] kworker/-214 5.... 333262184us : i915_gem_switch_to_kernel_context: awake?=yes <0> [333.491487] kworker/-214 5.... 333262192us : i915_request_add: rcs0 fence 2afac:1522 <0> [333.491520] kworker/-214 5.... 333262193us : i915_request_add: marking (null) as active <0> [333.491553] i915_sel-4916 1.... 333262199us : intel_engine_cancel_stop_cs: rcs0 <0> [333.491587] i915_sel-4916 1.... 333262199us : execlists_reset_finish: rcs0: depth->0 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190313162835.30228-1-chris@chris-wilson.co.uk
2019-03-14 00:28:35 +08:00
if (!atomic_fetch_inc(&t->count))
tasklet_unlock_wait(t);
}
drm/i915/execlists: Direct submission of new requests (avoid tasklet/ksoftirqd) Back in commit 27af5eea54d1 ("drm/i915: Move execlists irq handler to a bottom half"), we came to the conclusion that running our CSB processing and ELSP submission from inside the irq handler was a bad idea. A really bad idea as we could impose nearly 1s latency on other users of the system, on average! Deferring our work to a tasklet allowed us to do the processing with irqs enabled, reducing the impact to an average of about 50us. We have since eradicated the use of forcewaked mmio from inside the CSB processing and ELSP submission, bringing the impact down to around 5us (on Kabylake); an order of magnitude better than our measurements 2 years ago on Broadwell and only about 2x worse on average than the gem_syslatency on an unladen system. In this iteration of the tasklet-vs-direct submission debate, we seek a compromise where by we submit new requests immediately to the HW but defer processing the CS interrupt onto a tasklet. We gain the advantage of low-latency and ksoftirqd avoidance when waking up the HW, while avoiding the system-wide starvation of our CS irq-storms. Comparing the impact on the maximum latency observed (that is the time stolen from an RT process) over a 120s interval, repeated several times (using gem_syslatency, similar to RT's cyclictest) while the system is fully laden with i915 nops, we see that direct submission an actually improve the worse case. Maximum latency in microseconds of a third party RT thread (gem_syslatency -t 120 -f 2) x Always using tasklets (a couple of >1000us outliers removed) + Only using tasklets from CS irq, direct submission of requests +------------------------------------------------------------------------+ | + | | + | | + | | + + | | + + + | | + + + + x x x | | +++ + + + x x x x x x | | +++ + ++ + + *x x x x x x | | +++ + ++ + * *x x * x x x | | + +++ + ++ * * +*xxx * x x xx | | * +++ + ++++* *x+**xx+ * x x xxxx x | | **x++++*++**+*x*x****x+ * +x xx xxxx x x | |x* ******+***************++*+***xxxxxx* xx*x xxx + x+| | |__________MA___________| | | |______M__A________| | +------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 118 91 186 124 125.28814 16.279137 + 120 92 187 109 112.00833 13.458617 Difference at 95.0% confidence -13.2798 +/- 3.79219 -10.5994% +/- 3.02677% (Student's t, pooled s = 14.9237) However the mean latency is adversely affected: Mean latency in microseconds of a third party RT thread (gem_syslatency -t 120 -f 1) x Always using tasklets + Only using tasklets from CS irq, direct submission of requests +------------------------------------------------------------------------+ | xxxxxx + ++ | | xxxxxx + ++ | | xxxxxx + +++ ++ | | xxxxxxx +++++ ++ | | xxxxxxx +++++ ++ | | xxxxxxx +++++ +++ | | xxxxxxx + ++++++++++ | | xxxxxxxx ++ ++++++++++ | | xxxxxxxx ++ ++++++++++ | | xxxxxxxxxx +++++++++++++++ | | xxxxxxxxxxx x +++++++++++++++ | |x xxxxxxxxxxxxx x + + ++++++++++++++++++ +| | |__A__| | | |____A___| | +------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 120 3.506 3.727 3.631 3.6321417 0.02773109 + 120 3.834 4.149 4.039 4.0375167 0.041221676 Difference at 95.0% confidence 0.405375 +/- 0.00888913 11.1608% +/- 0.244735% (Student's t, pooled s = 0.03513) However, since the mean latency corresponds to the amount of irqsoff processing we have to do for a CS interrupt, we only need to speed that up to benefit not just system latency but our own throughput. v2: Remember to defer submissions when under reset. v4: Only use direct submission for new requests v5: Be aware that with mixing direct tasklet evaluation and deferred tasklets, we may end up idling before running the deferred tasklet. v6: Remove the redudant likely() from tasklet_is_enabled(), restrict the annotation to reset_in_progress(). v7: Take the full timeline.lock when enabling perf_pmu stats as the tasklet is no longer a valid guard. A consequence is that the stats are now only valid for engines also using the timeline.lock to process state. Testcase: igt/gem_exec_latency/*rthog* References: 27af5eea54d1 ("drm/i915: Move execlists irq handler to a bottom half") Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180628201211.13837-9-chris@chris-wilson.co.uk
2018-06-29 04:12:11 +08:00
static inline bool __tasklet_is_enabled(const struct tasklet_struct *t)
{
return !atomic_read(&t->count);
}
drm/i915: Always kick the execlists tasklet after reset With direct submission being disabled while the reset in progress, we have a small window where we may forgo the submission of a new request and not notice its addition during execlists_reset_finish. To close this window, always schedule the submission tasklet on coming out of reset to catch any residual work. <6> [333.144082] i915: Running intel_hangcheck_live_selftests/igt_reset_engines <3> [333.296927] i915_reset_engine(rcs0:idle): failed to idle after reset <6> [333.296932] i915 0000:00:02.0: [drm] rcs0 <6> [333.296934] i915 0000:00:02.0: [drm] Hangcheck 0:a9ddf7a5 [4157 ms] <6> [333.296936] i915 0000:00:02.0: [drm] Reset count: 36048 (global 754) <6> [333.296938] i915 0000:00:02.0: [drm] Requests: <6> [333.296997] i915 0000:00:02.0: [drm] RING_START: 0x00000000 <6> [333.296999] i915 0000:00:02.0: [drm] RING_HEAD: 0x00000000 <6> [333.297001] i915 0000:00:02.0: [drm] RING_TAIL: 0x00000000 <6> [333.297003] i915 0000:00:02.0: [drm] RING_CTL: 0x00000000 <6> [333.297005] i915 0000:00:02.0: [drm] RING_MODE: 0x00000200 [idle] <6> [333.297007] i915 0000:00:02.0: [drm] RING_IMR: fffffeff <6> [333.297010] i915 0000:00:02.0: [drm] ACTHD: 0x00000000_00000000 <6> [333.297012] i915 0000:00:02.0: [drm] BBADDR: 0x00000000_00000000 <6> [333.297015] i915 0000:00:02.0: [drm] DMA_FADDR: 0x00000000_00000000 <6> [333.297017] i915 0000:00:02.0: [drm] IPEIR: 0x00000000 <6> [333.297019] i915 0000:00:02.0: [drm] IPEHR: 0x00000000 <6> [333.297021] i915 0000:00:02.0: [drm] Execlist status: 0x00000001 00000000 <6> [333.297023] i915 0000:00:02.0: [drm] Execlist CSB read 5, write 5 [mmio:7], tasklet queued? no (enabled) <6> [333.297025] i915 0000:00:02.0: [drm] ELSP[0] idle <6> [333.297027] i915 0000:00:02.0: [drm] ELSP[1] idle <6> [333.297028] i915 0000:00:02.0: [drm] HW active? 0x0 <6> [333.297044] i915 0000:00:02.0: [drm] Queue priority hint: -8186 <6> [333.297067] i915 0000:00:02.0: [drm] Q 2afac:5f2+ prio=-8186 @ 50ms: (null) <6> [333.297068] i915 0000:00:02.0: [drm] HWSP: <6> [333.297071] i915 0000:00:02.0: [drm] [0000] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <6> [333.297073] i915 0000:00:02.0: [drm] * <6> [333.297075] i915 0000:00:02.0: [drm] [0040] 00000001 00000000 00000018 00000002 00000001 00000000 00000018 00000000 <6> [333.297077] i915 0000:00:02.0: [drm] [0060] 00000001 00000000 00008002 00000002 00000000 00000000 00000000 00000005 <6> [333.297079] i915 0000:00:02.0: [drm] [0080] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <6> [333.297081] i915 0000:00:02.0: [drm] * <6> [333.297083] i915 0000:00:02.0: [drm] [00c0] 00000000 00000000 00000000 00000000 a9ddf7a5 00000000 00000000 00000000 <6> [333.297085] i915 0000:00:02.0: [drm] [00e0] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <6> [333.297087] i915 0000:00:02.0: [drm] * <6> [333.297089] i915 0000:00:02.0: [drm] Idle? no <6> [333.297090] i915_reset_engine(rcs0:idle): 3000 resets <3> [333.297092] i915/intel_hangcheck_live_selftests: igt_reset_engines failed with error -5 <3> [333.455460] i915 0000:00:02.0: Failed to idle engines, declaring wedged! ... <0> [333.491294] i915_sel-4916 1.... 333262143us : i915_reset_engine: rcs0 flags=4 <0> [333.491328] i915_sel-4916 1.... 333262143us : execlists_reset_prepare: rcs0: depth<-0 <0> [333.491362] i915_sel-4916 1.... 333262143us : intel_engine_stop_cs: rcs0 <0> [333.491396] i915_sel-4916 1d..1 333262144us : process_csb: rcs0 cs-irq head=5, tail=5 <0> [333.491424] i915_sel-4916 1.... 333262145us : intel_gpu_reset: engine_mask=1 <0> [333.491454] kworker/-214 5.... 333262184us : i915_gem_switch_to_kernel_context: awake?=yes <0> [333.491487] kworker/-214 5.... 333262192us : i915_request_add: rcs0 fence 2afac:1522 <0> [333.491520] kworker/-214 5.... 333262193us : i915_request_add: marking (null) as active <0> [333.491553] i915_sel-4916 1.... 333262199us : intel_engine_cancel_stop_cs: rcs0 <0> [333.491587] i915_sel-4916 1.... 333262199us : execlists_reset_finish: rcs0: depth->0 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190313162835.30228-1-chris@chris-wilson.co.uk
2019-03-14 00:28:35 +08:00
static inline bool __tasklet_enable(struct tasklet_struct *t)
{
return atomic_dec_and_test(&t->count);
}
#endif /* __I915_GEM_H__ */