OpenCloudOS-Kernel/drivers/char/tpm/tpm-interface.c

739 lines
17 KiB
C
Raw Normal View History

/*
* Copyright (C) 2004 IBM Corporation
* Copyright (C) 2014 Intel Corporation
*
* Authors:
* Leendert van Doorn <leendert@watson.ibm.com>
* Dave Safford <safford@watson.ibm.com>
* Reiner Sailer <sailer@watson.ibm.com>
* Kylene Hall <kjhall@us.ibm.com>
*
* Maintained by: <tpmdd-devel@lists.sourceforge.net>
*
* Device driver for TCG/TCPA TPM (trusted platform module).
tpm: cleanup checkpatch warnings before we rename the file it might be a good idea to cleanup the long persisting checkpatch warnings. Since everything is really trivial, splitting the patch up would only result in noise. For the interested reader - here the checkpatch warnings: (regrouped for easer readability) ERROR: trailing whitespace + * Specifications at www.trustedcomputinggroup.org^I $ + * $ +^I/* $ +^I parameters (RSA 12->bytes: keybit, #primes, expbit) $ WARNING: unnecessary whitespace before a quoted newline + "invalid count value %x %zx \n", count, bufsiz); ERROR: do not use assignment in if condition + if ((rc = chip->vendor.send(chip, (u8 *) buf, count)) < 0) { ERROR: space required after that ',' (ctx:VxV) + len = tpm_transmit(chip,(u8 *) cmd, len); ^ ERROR: "foo * bar" should be "foo *bar" +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_temp_deactivated(struct device * dev, + struct device_attribute * attr, char *buf) WARNING: please, no space before tabs + * @chip_num: ^Itpm idx # or ANY$ + * @res_buf: ^ITPM_PCR value$ + * ^I^Isize of res_buf is 20 bytes (or NULL if you don't care)$ + * @chip_num: ^Itpm idx # or AN&$ + * @hash: ^Ihash value used to extend pcr value$ ERROR: code indent should use tabs where possible +^I TPM_ORD_CONTINUE_SELFTEST);$ WARNING: line over 80 characters +static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask, bool check_cancel, ERROR: trailing whitespace + * Called from tpm_<specific>.c probe function only for devices $ total: 16 errors, 7 warnings, 1554 lines checked Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2013-10-22 06:29:14 +08:00
* Specifications at www.trustedcomputinggroup.org
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2 of the
* License.
tpm: cleanup checkpatch warnings before we rename the file it might be a good idea to cleanup the long persisting checkpatch warnings. Since everything is really trivial, splitting the patch up would only result in noise. For the interested reader - here the checkpatch warnings: (regrouped for easer readability) ERROR: trailing whitespace + * Specifications at www.trustedcomputinggroup.org^I $ + * $ +^I/* $ +^I parameters (RSA 12->bytes: keybit, #primes, expbit) $ WARNING: unnecessary whitespace before a quoted newline + "invalid count value %x %zx \n", count, bufsiz); ERROR: do not use assignment in if condition + if ((rc = chip->vendor.send(chip, (u8 *) buf, count)) < 0) { ERROR: space required after that ',' (ctx:VxV) + len = tpm_transmit(chip,(u8 *) cmd, len); ^ ERROR: "foo * bar" should be "foo *bar" +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_temp_deactivated(struct device * dev, + struct device_attribute * attr, char *buf) WARNING: please, no space before tabs + * @chip_num: ^Itpm idx # or ANY$ + * @res_buf: ^ITPM_PCR value$ + * ^I^Isize of res_buf is 20 bytes (or NULL if you don't care)$ + * @chip_num: ^Itpm idx # or AN&$ + * @hash: ^Ihash value used to extend pcr value$ ERROR: code indent should use tabs where possible +^I TPM_ORD_CONTINUE_SELFTEST);$ WARNING: line over 80 characters +static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask, bool check_cancel, ERROR: trailing whitespace + * Called from tpm_<specific>.c probe function only for devices $ total: 16 errors, 7 warnings, 1554 lines checked Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2013-10-22 06:29:14 +08:00
*
* Note, the TPM chip is not interrupt driven (only polling)
* and can have very long timeouts (minutes!). Hence the unusual
* calls to msleep.
*
*/
#include <linux/poll.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
#include <linux/freezer.h>
#include <linux/tpm_eventlog.h>
#include "tpm.h"
/*
* Bug workaround - some TPM's don't flush the most
* recently changed pcr on suspend, so force the flush
* with an extend to the selected _unused_ non-volatile pcr.
*/
static int tpm_suspend_pcr;
module_param_named(suspend_pcr, tpm_suspend_pcr, uint, 0644);
MODULE_PARM_DESC(suspend_pcr,
"PCR to use for dummy writes to facilitate flush on suspend.");
/**
* tpm_calc_ordinal_duration() - calculate the maximum command duration
* @chip: TPM chip to use.
* @ordinal: TPM command ordinal.
*
* The function returns the maximum amount of time the chip could take
* to return the result for a particular ordinal in jiffies.
*
* Return: A maximal duration time for an ordinal in jiffies.
*/
unsigned long tpm_calc_ordinal_duration(struct tpm_chip *chip, u32 ordinal)
{
if (chip->flags & TPM_CHIP_FLAG_TPM2)
return tpm2_calc_ordinal_duration(chip, ordinal);
else
return tpm1_calc_ordinal_duration(chip, ordinal);
}
EXPORT_SYMBOL_GPL(tpm_calc_ordinal_duration);
tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented According to the TPM Library Specification, a TPM device must do a command header validation before processing and return a TPM_RC_COMMAND_CODE code if the command is not implemented. So user-space will expect to handle that response as an error. But if the in-kernel resource manager is used (/dev/tpmrm?), an -EINVAL errno code is returned instead if the command isn't implemented. This confuses userspace since it doesn't expect that error value. This also isn't consistent with the behavior when not using TPM spaces and accessing the TPM directly (/dev/tpm?). In this case, the command is sent to the TPM even when not implemented and the TPM responds with an error. Instead of returning an -EINVAL errno code when the tpm_validate_command() function fails, synthesize a TPM command response so user-space can get a TPM_RC_COMMAND_CODE as expected when a chip doesn't implement the command. The TPM only sets 12 of the 32 bits in the TPM_RC response, so the TSS and TAB specifications define that higher layers in the stack should use some of the unused 20 bits to specify from which level of the stack the error is coming from. Since the TPM_RC_COMMAND_CODE response code is sent by the kernel resource manager, set the error level to the TAB/RM layer so user-space is aware of this. Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: William Roberts <william.c.roberts@intel.com> Reviewed-by: Philip Tricca <philip.b.tricca@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-11-30 15:39:07 +08:00
static int tpm_validate_command(struct tpm_chip *chip,
struct tpm_space *space,
const u8 *cmd,
size_t len)
{
const struct tpm_input_header *header = (const void *)cmd;
int i;
u32 cc;
u32 attrs;
unsigned int nr_handles;
if (len < TPM_HEADER_SIZE)
tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented According to the TPM Library Specification, a TPM device must do a command header validation before processing and return a TPM_RC_COMMAND_CODE code if the command is not implemented. So user-space will expect to handle that response as an error. But if the in-kernel resource manager is used (/dev/tpmrm?), an -EINVAL errno code is returned instead if the command isn't implemented. This confuses userspace since it doesn't expect that error value. This also isn't consistent with the behavior when not using TPM spaces and accessing the TPM directly (/dev/tpm?). In this case, the command is sent to the TPM even when not implemented and the TPM responds with an error. Instead of returning an -EINVAL errno code when the tpm_validate_command() function fails, synthesize a TPM command response so user-space can get a TPM_RC_COMMAND_CODE as expected when a chip doesn't implement the command. The TPM only sets 12 of the 32 bits in the TPM_RC response, so the TSS and TAB specifications define that higher layers in the stack should use some of the unused 20 bits to specify from which level of the stack the error is coming from. Since the TPM_RC_COMMAND_CODE response code is sent by the kernel resource manager, set the error level to the TAB/RM layer so user-space is aware of this. Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: William Roberts <william.c.roberts@intel.com> Reviewed-by: Philip Tricca <philip.b.tricca@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-11-30 15:39:07 +08:00
return -EINVAL;
if (!space)
tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented According to the TPM Library Specification, a TPM device must do a command header validation before processing and return a TPM_RC_COMMAND_CODE code if the command is not implemented. So user-space will expect to handle that response as an error. But if the in-kernel resource manager is used (/dev/tpmrm?), an -EINVAL errno code is returned instead if the command isn't implemented. This confuses userspace since it doesn't expect that error value. This also isn't consistent with the behavior when not using TPM spaces and accessing the TPM directly (/dev/tpm?). In this case, the command is sent to the TPM even when not implemented and the TPM responds with an error. Instead of returning an -EINVAL errno code when the tpm_validate_command() function fails, synthesize a TPM command response so user-space can get a TPM_RC_COMMAND_CODE as expected when a chip doesn't implement the command. The TPM only sets 12 of the 32 bits in the TPM_RC response, so the TSS and TAB specifications define that higher layers in the stack should use some of the unused 20 bits to specify from which level of the stack the error is coming from. Since the TPM_RC_COMMAND_CODE response code is sent by the kernel resource manager, set the error level to the TAB/RM layer so user-space is aware of this. Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: William Roberts <william.c.roberts@intel.com> Reviewed-by: Philip Tricca <philip.b.tricca@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-11-30 15:39:07 +08:00
return 0;
if (chip->flags & TPM_CHIP_FLAG_TPM2 && chip->nr_commands) {
cc = be32_to_cpu(header->ordinal);
i = tpm2_find_cc(chip, cc);
if (i < 0) {
dev_dbg(&chip->dev, "0x%04X is an invalid command\n",
cc);
tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented According to the TPM Library Specification, a TPM device must do a command header validation before processing and return a TPM_RC_COMMAND_CODE code if the command is not implemented. So user-space will expect to handle that response as an error. But if the in-kernel resource manager is used (/dev/tpmrm?), an -EINVAL errno code is returned instead if the command isn't implemented. This confuses userspace since it doesn't expect that error value. This also isn't consistent with the behavior when not using TPM spaces and accessing the TPM directly (/dev/tpm?). In this case, the command is sent to the TPM even when not implemented and the TPM responds with an error. Instead of returning an -EINVAL errno code when the tpm_validate_command() function fails, synthesize a TPM command response so user-space can get a TPM_RC_COMMAND_CODE as expected when a chip doesn't implement the command. The TPM only sets 12 of the 32 bits in the TPM_RC response, so the TSS and TAB specifications define that higher layers in the stack should use some of the unused 20 bits to specify from which level of the stack the error is coming from. Since the TPM_RC_COMMAND_CODE response code is sent by the kernel resource manager, set the error level to the TAB/RM layer so user-space is aware of this. Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: William Roberts <william.c.roberts@intel.com> Reviewed-by: Philip Tricca <philip.b.tricca@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-11-30 15:39:07 +08:00
return -EOPNOTSUPP;
}
attrs = chip->cc_attrs_tbl[i];
nr_handles =
4 * ((attrs >> TPM2_CC_ATTR_CHANDLES) & GENMASK(2, 0));
if (len < TPM_HEADER_SIZE + 4 * nr_handles)
goto err_len;
}
tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented According to the TPM Library Specification, a TPM device must do a command header validation before processing and return a TPM_RC_COMMAND_CODE code if the command is not implemented. So user-space will expect to handle that response as an error. But if the in-kernel resource manager is used (/dev/tpmrm?), an -EINVAL errno code is returned instead if the command isn't implemented. This confuses userspace since it doesn't expect that error value. This also isn't consistent with the behavior when not using TPM spaces and accessing the TPM directly (/dev/tpm?). In this case, the command is sent to the TPM even when not implemented and the TPM responds with an error. Instead of returning an -EINVAL errno code when the tpm_validate_command() function fails, synthesize a TPM command response so user-space can get a TPM_RC_COMMAND_CODE as expected when a chip doesn't implement the command. The TPM only sets 12 of the 32 bits in the TPM_RC response, so the TSS and TAB specifications define that higher layers in the stack should use some of the unused 20 bits to specify from which level of the stack the error is coming from. Since the TPM_RC_COMMAND_CODE response code is sent by the kernel resource manager, set the error level to the TAB/RM layer so user-space is aware of this. Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: William Roberts <william.c.roberts@intel.com> Reviewed-by: Philip Tricca <philip.b.tricca@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-11-30 15:39:07 +08:00
return 0;
err_len:
dev_dbg(&chip->dev,
"%s: insufficient command length %zu", __func__, len);
tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented According to the TPM Library Specification, a TPM device must do a command header validation before processing and return a TPM_RC_COMMAND_CODE code if the command is not implemented. So user-space will expect to handle that response as an error. But if the in-kernel resource manager is used (/dev/tpmrm?), an -EINVAL errno code is returned instead if the command isn't implemented. This confuses userspace since it doesn't expect that error value. This also isn't consistent with the behavior when not using TPM spaces and accessing the TPM directly (/dev/tpm?). In this case, the command is sent to the TPM even when not implemented and the TPM responds with an error. Instead of returning an -EINVAL errno code when the tpm_validate_command() function fails, synthesize a TPM command response so user-space can get a TPM_RC_COMMAND_CODE as expected when a chip doesn't implement the command. The TPM only sets 12 of the 32 bits in the TPM_RC response, so the TSS and TAB specifications define that higher layers in the stack should use some of the unused 20 bits to specify from which level of the stack the error is coming from. Since the TPM_RC_COMMAND_CODE response code is sent by the kernel resource manager, set the error level to the TAB/RM layer so user-space is aware of this. Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: William Roberts <william.c.roberts@intel.com> Reviewed-by: Philip Tricca <philip.b.tricca@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-11-30 15:39:07 +08:00
return -EINVAL;
}
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 23:13:33 +08:00
static int tpm_request_locality(struct tpm_chip *chip, unsigned int flags)
{
int rc;
if (flags & TPM_TRANSMIT_NESTED)
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 23:13:33 +08:00
return 0;
if (!chip->ops->request_locality)
return 0;
rc = chip->ops->request_locality(chip, 0);
if (rc < 0)
return rc;
chip->locality = rc;
return 0;
}
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 23:13:33 +08:00
static void tpm_relinquish_locality(struct tpm_chip *chip, unsigned int flags)
{
int rc;
if (flags & TPM_TRANSMIT_NESTED)
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 23:13:33 +08:00
return;
if (!chip->ops->relinquish_locality)
return;
rc = chip->ops->relinquish_locality(chip, chip->locality);
if (rc)
dev_err(&chip->dev, "%s: : error %d\n", __func__, rc);
chip->locality = -1;
}
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 23:13:33 +08:00
static int tpm_cmd_ready(struct tpm_chip *chip, unsigned int flags)
{
if (flags & TPM_TRANSMIT_NESTED)
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 23:13:33 +08:00
return 0;
if (!chip->ops->cmd_ready)
return 0;
return chip->ops->cmd_ready(chip);
}
static int tpm_go_idle(struct tpm_chip *chip, unsigned int flags)
{
if (flags & TPM_TRANSMIT_NESTED)
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 23:13:33 +08:00
return 0;
if (!chip->ops->go_idle)
return 0;
return chip->ops->go_idle(chip);
}
static ssize_t tpm_try_transmit(struct tpm_chip *chip,
struct tpm_space *space,
u8 *buf, size_t bufsiz,
unsigned int flags)
{
struct tpm_output_header *header = (void *)buf;
int rc;
ssize_t len = 0;
u32 count, ordinal;
unsigned long stop;
bool need_locality;
tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented According to the TPM Library Specification, a TPM device must do a command header validation before processing and return a TPM_RC_COMMAND_CODE code if the command is not implemented. So user-space will expect to handle that response as an error. But if the in-kernel resource manager is used (/dev/tpmrm?), an -EINVAL errno code is returned instead if the command isn't implemented. This confuses userspace since it doesn't expect that error value. This also isn't consistent with the behavior when not using TPM spaces and accessing the TPM directly (/dev/tpm?). In this case, the command is sent to the TPM even when not implemented and the TPM responds with an error. Instead of returning an -EINVAL errno code when the tpm_validate_command() function fails, synthesize a TPM command response so user-space can get a TPM_RC_COMMAND_CODE as expected when a chip doesn't implement the command. The TPM only sets 12 of the 32 bits in the TPM_RC response, so the TSS and TAB specifications define that higher layers in the stack should use some of the unused 20 bits to specify from which level of the stack the error is coming from. Since the TPM_RC_COMMAND_CODE response code is sent by the kernel resource manager, set the error level to the TAB/RM layer so user-space is aware of this. Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: William Roberts <william.c.roberts@intel.com> Reviewed-by: Philip Tricca <philip.b.tricca@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-11-30 15:39:07 +08:00
rc = tpm_validate_command(chip, space, buf, bufsiz);
if (rc == -EINVAL)
return rc;
/*
* If the command is not implemented by the TPM, synthesize a
* response with a TPM2_RC_COMMAND_CODE return for user-space.
*/
if (rc == -EOPNOTSUPP) {
header->length = cpu_to_be32(sizeof(*header));
header->tag = cpu_to_be16(TPM2_ST_NO_SESSIONS);
header->return_code = cpu_to_be32(TPM2_RC_COMMAND_CODE |
TSS2_RESMGR_TPM_RC_LAYER);
return sizeof(*header);
tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented According to the TPM Library Specification, a TPM device must do a command header validation before processing and return a TPM_RC_COMMAND_CODE code if the command is not implemented. So user-space will expect to handle that response as an error. But if the in-kernel resource manager is used (/dev/tpmrm?), an -EINVAL errno code is returned instead if the command isn't implemented. This confuses userspace since it doesn't expect that error value. This also isn't consistent with the behavior when not using TPM spaces and accessing the TPM directly (/dev/tpm?). In this case, the command is sent to the TPM even when not implemented and the TPM responds with an error. Instead of returning an -EINVAL errno code when the tpm_validate_command() function fails, synthesize a TPM command response so user-space can get a TPM_RC_COMMAND_CODE as expected when a chip doesn't implement the command. The TPM only sets 12 of the 32 bits in the TPM_RC response, so the TSS and TAB specifications define that higher layers in the stack should use some of the unused 20 bits to specify from which level of the stack the error is coming from. Since the TPM_RC_COMMAND_CODE response code is sent by the kernel resource manager, set the error level to the TAB/RM layer so user-space is aware of this. Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: William Roberts <william.c.roberts@intel.com> Reviewed-by: Philip Tricca <philip.b.tricca@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-11-30 15:39:07 +08:00
}
if (bufsiz > TPM_BUFSIZE)
bufsiz = TPM_BUFSIZE;
count = be32_to_cpu(*((__be32 *) (buf + 2)));
ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
if (count == 0)
return -ENODATA;
if (count > bufsiz) {
dev_err(&chip->dev,
tpm: cleanup checkpatch warnings before we rename the file it might be a good idea to cleanup the long persisting checkpatch warnings. Since everything is really trivial, splitting the patch up would only result in noise. For the interested reader - here the checkpatch warnings: (regrouped for easer readability) ERROR: trailing whitespace + * Specifications at www.trustedcomputinggroup.org^I $ + * $ +^I/* $ +^I parameters (RSA 12->bytes: keybit, #primes, expbit) $ WARNING: unnecessary whitespace before a quoted newline + "invalid count value %x %zx \n", count, bufsiz); ERROR: do not use assignment in if condition + if ((rc = chip->vendor.send(chip, (u8 *) buf, count)) < 0) { ERROR: space required after that ',' (ctx:VxV) + len = tpm_transmit(chip,(u8 *) cmd, len); ^ ERROR: "foo * bar" should be "foo *bar" +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_temp_deactivated(struct device * dev, + struct device_attribute * attr, char *buf) WARNING: please, no space before tabs + * @chip_num: ^Itpm idx # or ANY$ + * @res_buf: ^ITPM_PCR value$ + * ^I^Isize of res_buf is 20 bytes (or NULL if you don't care)$ + * @chip_num: ^Itpm idx # or AN&$ + * @hash: ^Ihash value used to extend pcr value$ ERROR: code indent should use tabs where possible +^I TPM_ORD_CONTINUE_SELFTEST);$ WARNING: line over 80 characters +static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask, bool check_cancel, ERROR: trailing whitespace + * Called from tpm_<specific>.c probe function only for devices $ total: 16 errors, 7 warnings, 1554 lines checked Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2013-10-22 06:29:14 +08:00
"invalid count value %x %zx\n", count, bufsiz);
return -E2BIG;
}
if (!(flags & TPM_TRANSMIT_UNLOCKED) && !(flags & TPM_TRANSMIT_NESTED))
mutex_lock(&chip->tpm_mutex);
if (chip->ops->clk_enable != NULL)
chip->ops->clk_enable(chip, true);
/* Store the decision as chip->locality will be changed. */
need_locality = chip->locality == -1;
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 23:13:33 +08:00
if (need_locality) {
rc = tpm_request_locality(chip, flags);
if (rc < 0)
goto out_no_locality;
}
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 23:13:33 +08:00
rc = tpm_cmd_ready(chip, flags);
if (rc)
goto out;
rc = tpm2_prepare_space(chip, space, ordinal, buf);
if (rc)
goto out;
rc = chip->ops->send(chip, buf, count);
tpm: cleanup checkpatch warnings before we rename the file it might be a good idea to cleanup the long persisting checkpatch warnings. Since everything is really trivial, splitting the patch up would only result in noise. For the interested reader - here the checkpatch warnings: (regrouped for easer readability) ERROR: trailing whitespace + * Specifications at www.trustedcomputinggroup.org^I $ + * $ +^I/* $ +^I parameters (RSA 12->bytes: keybit, #primes, expbit) $ WARNING: unnecessary whitespace before a quoted newline + "invalid count value %x %zx \n", count, bufsiz); ERROR: do not use assignment in if condition + if ((rc = chip->vendor.send(chip, (u8 *) buf, count)) < 0) { ERROR: space required after that ',' (ctx:VxV) + len = tpm_transmit(chip,(u8 *) cmd, len); ^ ERROR: "foo * bar" should be "foo *bar" +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_temp_deactivated(struct device * dev, + struct device_attribute * attr, char *buf) WARNING: please, no space before tabs + * @chip_num: ^Itpm idx # or ANY$ + * @res_buf: ^ITPM_PCR value$ + * ^I^Isize of res_buf is 20 bytes (or NULL if you don't care)$ + * @chip_num: ^Itpm idx # or AN&$ + * @hash: ^Ihash value used to extend pcr value$ ERROR: code indent should use tabs where possible +^I TPM_ORD_CONTINUE_SELFTEST);$ WARNING: line over 80 characters +static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask, bool check_cancel, ERROR: trailing whitespace + * Called from tpm_<specific>.c probe function only for devices $ total: 16 errors, 7 warnings, 1554 lines checked Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2013-10-22 06:29:14 +08:00
if (rc < 0) {
if (rc != -EPIPE)
dev_err(&chip->dev,
"%s: tpm_send: error %d\n", __func__, rc);
goto out;
}
if (chip->flags & TPM_CHIP_FLAG_IRQ)
goto out_recv;
stop = jiffies + tpm_calc_ordinal_duration(chip, ordinal);
do {
u8 status = chip->ops->status(chip);
if ((status & chip->ops->req_complete_mask) ==
chip->ops->req_complete_val)
goto out_recv;
if (chip->ops->req_canceled(chip, status)) {
dev_err(&chip->dev, "Operation Canceled\n");
rc = -ECANCELED;
goto out;
}
tpm_msleep(TPM_TIMEOUT_POLL);
rmb();
} while (time_before(jiffies, stop));
chip->ops->cancel(chip);
dev_err(&chip->dev, "Operation Timed out\n");
rc = -ETIME;
goto out;
out_recv:
len = chip->ops->recv(chip, buf, bufsiz);
if (len < 0) {
rc = len;
dev_err(&chip->dev,
"tpm_transmit: tpm_recv: error %d\n", rc);
goto out;
} else if (len < TPM_HEADER_SIZE) {
rc = -EFAULT;
goto out;
}
if (len != be32_to_cpu(header->length)) {
rc = -EFAULT;
goto out;
}
rc = tpm2_commit_space(chip, space, ordinal, buf, &len);
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 23:13:33 +08:00
if (rc)
dev_err(&chip->dev, "tpm2_commit_space: error %d\n", rc);
out:
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 23:13:33 +08:00
rc = tpm_go_idle(chip, flags);
if (rc)
goto out;
if (need_locality)
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 23:13:33 +08:00
tpm_relinquish_locality(chip, flags);
out_no_locality:
if (chip->ops->clk_enable != NULL)
chip->ops->clk_enable(chip, false);
if (!(flags & TPM_TRANSMIT_UNLOCKED) && !(flags & TPM_TRANSMIT_NESTED))
mutex_unlock(&chip->tpm_mutex);
return rc ? rc : len;
}
/**
* tpm_transmit - Internal kernel interface to transmit TPM commands.
*
* @chip: TPM chip to use
* @space: tpm space
* @buf: TPM command buffer
* @bufsiz: length of the TPM command buffer
* @flags: tpm transmit flags - bitmap
*
* A wrapper around tpm_try_transmit that handles TPM2_RC_RETRY
* returns from the TPM and retransmits the command after a delay up
* to a maximum wait of TPM2_DURATION_LONG.
*
* Note: TPM1 never returns TPM2_RC_RETRY so the retry logic is TPM2
* only
*
* Return:
* the length of the return when the operation is successful.
* A negative number for system errors (errno).
*/
ssize_t tpm_transmit(struct tpm_chip *chip, struct tpm_space *space,
u8 *buf, size_t bufsiz, unsigned int flags)
{
struct tpm_output_header *header = (struct tpm_output_header *)buf;
/* space for header and handles */
u8 save[TPM_HEADER_SIZE + 3*sizeof(u32)];
unsigned int delay_msec = TPM2_DURATION_SHORT;
u32 rc = 0;
ssize_t ret;
const size_t save_size = min(space ? sizeof(save) : TPM_HEADER_SIZE,
bufsiz);
tpm: fix intermittent failure with self tests My Nuvoton 6xx in a Dell XPS-13 has been intermittently failing to work (necessitating a reboot). The problem seems to be that the TPM gets into a state where the partial self-test doesn't return TPM_RC_SUCCESS (meaning all tests have run to completion), but instead returns TPM_RC_TESTING (meaning some tests are still running in the background). There are various theories that resending the self-test command actually causes the tests to restart and thus triggers more TPM_RC_TESTING returns until the timeout is exceeded. There are several issues here: firstly being we shouldn't slow down the boot sequence waiting for the self test to complete once the TPM backgrounds them. It will actually make available all functions that have passed and if it gets a failure return TPM_RC_FAILURE to every subsequent command. So the fix is to kick off self tests once and if they return TPM_RC_TESTING log that as a backgrounded self test and continue on. In order to prevent other tpm users from seeing any TPM_RC_TESTING returns (which it might if they send a command that needs a TPM subsystem which is still under test), we loop in tpm_transmit_cmd until either a timeout or we don't get a TPM_RC_TESTING return. Finally, there have been observations of strange returns from a partial test. One Nuvoton is occasionally returning TPM_RC_COMMAND_CODE, so treat any unexpected return from a partial self test as an indication we need to run a full self test. [jarkko.sakkinen@linux.intel.com: cleaned up some klog messages and dropped tpm_transmit_check() helper function from James' original commit.] Fixes: 2482b1bba5122 ("tpm: Trigger only missing TPM 2.0 self tests") Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
2018-03-22 23:32:20 +08:00
/* the command code is where the return code will be */
u32 cc = be32_to_cpu(header->return_code);
/*
* Subtlety here: if we have a space, the handles will be
* transformed, so when we restore the header we also have to
* restore the handles.
*/
memcpy(save, buf, save_size);
for (;;) {
ret = tpm_try_transmit(chip, space, buf, bufsiz, flags);
if (ret < 0)
break;
rc = be32_to_cpu(header->return_code);
tpm: fix intermittent failure with self tests My Nuvoton 6xx in a Dell XPS-13 has been intermittently failing to work (necessitating a reboot). The problem seems to be that the TPM gets into a state where the partial self-test doesn't return TPM_RC_SUCCESS (meaning all tests have run to completion), but instead returns TPM_RC_TESTING (meaning some tests are still running in the background). There are various theories that resending the self-test command actually causes the tests to restart and thus triggers more TPM_RC_TESTING returns until the timeout is exceeded. There are several issues here: firstly being we shouldn't slow down the boot sequence waiting for the self test to complete once the TPM backgrounds them. It will actually make available all functions that have passed and if it gets a failure return TPM_RC_FAILURE to every subsequent command. So the fix is to kick off self tests once and if they return TPM_RC_TESTING log that as a backgrounded self test and continue on. In order to prevent other tpm users from seeing any TPM_RC_TESTING returns (which it might if they send a command that needs a TPM subsystem which is still under test), we loop in tpm_transmit_cmd until either a timeout or we don't get a TPM_RC_TESTING return. Finally, there have been observations of strange returns from a partial test. One Nuvoton is occasionally returning TPM_RC_COMMAND_CODE, so treat any unexpected return from a partial self test as an indication we need to run a full self test. [jarkko.sakkinen@linux.intel.com: cleaned up some klog messages and dropped tpm_transmit_check() helper function from James' original commit.] Fixes: 2482b1bba5122 ("tpm: Trigger only missing TPM 2.0 self tests") Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
2018-03-22 23:32:20 +08:00
if (rc != TPM2_RC_RETRY && rc != TPM2_RC_TESTING)
break;
/*
* return immediately if self test returns test
* still running to shorten boot time.
*/
if (rc == TPM2_RC_TESTING && cc == TPM2_CC_SELF_TEST)
break;
if (delay_msec > TPM2_DURATION_LONG) {
tpm: fix intermittent failure with self tests My Nuvoton 6xx in a Dell XPS-13 has been intermittently failing to work (necessitating a reboot). The problem seems to be that the TPM gets into a state where the partial self-test doesn't return TPM_RC_SUCCESS (meaning all tests have run to completion), but instead returns TPM_RC_TESTING (meaning some tests are still running in the background). There are various theories that resending the self-test command actually causes the tests to restart and thus triggers more TPM_RC_TESTING returns until the timeout is exceeded. There are several issues here: firstly being we shouldn't slow down the boot sequence waiting for the self test to complete once the TPM backgrounds them. It will actually make available all functions that have passed and if it gets a failure return TPM_RC_FAILURE to every subsequent command. So the fix is to kick off self tests once and if they return TPM_RC_TESTING log that as a backgrounded self test and continue on. In order to prevent other tpm users from seeing any TPM_RC_TESTING returns (which it might if they send a command that needs a TPM subsystem which is still under test), we loop in tpm_transmit_cmd until either a timeout or we don't get a TPM_RC_TESTING return. Finally, there have been observations of strange returns from a partial test. One Nuvoton is occasionally returning TPM_RC_COMMAND_CODE, so treat any unexpected return from a partial self test as an indication we need to run a full self test. [jarkko.sakkinen@linux.intel.com: cleaned up some klog messages and dropped tpm_transmit_check() helper function from James' original commit.] Fixes: 2482b1bba5122 ("tpm: Trigger only missing TPM 2.0 self tests") Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
2018-03-22 23:32:20 +08:00
if (rc == TPM2_RC_RETRY)
dev_err(&chip->dev, "in retry loop\n");
else
dev_err(&chip->dev,
"self test is still running\n");
break;
}
tpm_msleep(delay_msec);
delay_msec *= 2;
memcpy(buf, save, save_size);
}
return ret;
}
/**
* tpm_transmit_cmd - send a tpm command to the device
* The function extracts tpm out header return code
*
* @chip: TPM chip to use
* @space: tpm space
* @buf: TPM command buffer
* @bufsiz: length of the buffer
* @min_rsp_body_length: minimum expected length of response body
* @flags: tpm transmit flags - bitmap
* @desc: command description used in the error message
*
* Return:
* 0 when the operation is successful.
* A negative number for system errors (errno).
* A positive number for a TPM error.
*/
ssize_t tpm_transmit_cmd(struct tpm_chip *chip, struct tpm_space *space,
void *buf, size_t bufsiz,
size_t min_rsp_body_length, unsigned int flags,
const char *desc)
{
const struct tpm_output_header *header = buf;
int err;
ssize_t len;
len = tpm_transmit(chip, space, buf, bufsiz, flags);
if (len < 0)
return len;
err = be32_to_cpu(header->return_code);
tpm: suppress transmit cmd error logs when TPM 1.2 is disabled/deactivated For TPM 1.2 chips the system setup utility allows to set the TPM device in one of the following states: * Active: Security chip is functional * Inactive: Security chip is visible, but is not functional * Disabled: Security chip is hidden and is not functional When choosing the "Inactive" state, the TPM 1.2 device is enumerated and registered, but sending TPM commands fail with either TPM_DEACTIVATED or TPM_DISABLED depending if the firmware deactivated or disabled the TPM. Since these TPM 1.2 error codes don't have special treatment, inactivating the TPM leads to a very noisy kernel log buffer that shows messages like the following: tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) tpm tpm0: A TPM error (6) occurred attempting to read a pcr value tpm tpm0: TPM is disabled/deactivated (0x6) tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting to read a pcr value ima: No TPM chip found, activating TPM-bypass! (rc=6) tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random Let's just suppress error log messages for the TPM_{DEACTIVATED,DISABLED} return codes, since this is expected when the TPM 1.2 is set to Inactive. In that case the kernel log is cleaner and less confusing for users, i.e: tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) tpm tpm0: TPM is disabled/deactivated (0x6) ima: No TPM chip found, activating TPM-bypass! (rc=6) Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-08-30 22:40:05 +08:00
if (err != 0 && err != TPM_ERR_DISABLED && err != TPM_ERR_DEACTIVATED
&& desc)
dev_err(&chip->dev, "A TPM error (%d) occurred %s\n", err,
desc);
if (err)
return err;
if (len < min_rsp_body_length + TPM_HEADER_SIZE)
return -EFAULT;
return 0;
}
EXPORT_SYMBOL_GPL(tpm_transmit_cmd);
int tpm_get_timeouts(struct tpm_chip *chip)
{
if (chip->flags & TPM_CHIP_FLAG_HAVE_TIMEOUTS)
return 0;
if (chip->flags & TPM_CHIP_FLAG_TPM2)
return tpm2_get_timeouts(chip);
else
return tpm1_get_timeouts(chip);
}
EXPORT_SYMBOL_GPL(tpm_get_timeouts);
/**
* tpm_is_tpm2 - do we a have a TPM2 chip?
* @chip: a &struct tpm_chip instance, %NULL for the default chip
*
* Return:
* 1 if we have a TPM2 chip.
* 0 if we don't have a TPM2 chip.
* A negative number for system errors (errno).
*/
int tpm_is_tpm2(struct tpm_chip *chip)
{
int rc;
chip = tpm_find_get_ops(chip);
if (!chip)
return -ENODEV;
rc = (chip->flags & TPM_CHIP_FLAG_TPM2) != 0;
tpm_put_ops(chip);
return rc;
}
EXPORT_SYMBOL_GPL(tpm_is_tpm2);
/**
* tpm_pcr_read - read a PCR value from SHA1 bank
* @chip: a &struct tpm_chip instance, %NULL for the default chip
* @pcr_idx: the PCR to be retrieved
* @res_buf: the value of the PCR
*
* Return: same as with tpm_transmit_cmd()
*/
int tpm_pcr_read(struct tpm_chip *chip, int pcr_idx, u8 *res_buf)
{
int rc;
chip = tpm_find_get_ops(chip);
if (!chip)
return -ENODEV;
if (chip->flags & TPM_CHIP_FLAG_TPM2)
rc = tpm2_pcr_read(chip, pcr_idx, res_buf);
else
rc = tpm1_pcr_read_dev(chip, pcr_idx, res_buf);
tpm_put_ops(chip);
return rc;
}
EXPORT_SYMBOL_GPL(tpm_pcr_read);
/**
* tpm_pcr_extend - extend a PCR value in SHA1 bank.
* @chip: a &struct tpm_chip instance, %NULL for the default chip
* @pcr_idx: the PCR to be retrieved
* @hash: the hash value used to extend the PCR value
*
* Note: with TPM 2.0 extends also those banks with a known digest size to the
* cryto subsystem in order to prevent malicious use of those PCR banks. In the
* future we should dynamically determine digest sizes.
*
* Return: same as with tpm_transmit_cmd()
*/
int tpm_pcr_extend(struct tpm_chip *chip, int pcr_idx, const u8 *hash)
{
int rc;
struct tpm2_digest digest_list[ARRAY_SIZE(chip->active_banks)];
u32 count = 0;
int i;
chip = tpm_find_get_ops(chip);
if (!chip)
return -ENODEV;
if (chip->flags & TPM_CHIP_FLAG_TPM2) {
memset(digest_list, 0, sizeof(digest_list));
for (i = 0; i < ARRAY_SIZE(chip->active_banks) &&
chip->active_banks[i] != TPM2_ALG_ERROR; i++) {
digest_list[i].alg_id = chip->active_banks[i];
memcpy(digest_list[i].digest, hash, TPM_DIGEST_SIZE);
count++;
}
rc = tpm2_pcr_extend(chip, pcr_idx, count, digest_list);
tpm_put_ops(chip);
return rc;
}
rc = tpm1_pcr_extend(chip, pcr_idx, hash,
"attempting extend a PCR value");
tpm_put_ops(chip);
return rc;
}
EXPORT_SYMBOL_GPL(tpm_pcr_extend);
/**
* tpm_send - send a TPM command
* @chip: a &struct tpm_chip instance, %NULL for the default chip
* @cmd: a TPM command buffer
* @buflen: the length of the TPM command buffer
*
* Return: same as with tpm_transmit_cmd()
*/
int tpm_send(struct tpm_chip *chip, void *cmd, size_t buflen)
{
int rc;
chip = tpm_find_get_ops(chip);
if (!chip)
return -ENODEV;
rc = tpm_transmit_cmd(chip, NULL, cmd, buflen, 0, 0,
"attempting to a send a command");
tpm_put_ops(chip);
return rc;
}
EXPORT_SYMBOL_GPL(tpm_send);
int tpm_auto_startup(struct tpm_chip *chip)
{
int rc;
if (!(chip->ops->flags & TPM_OPS_AUTO_STARTUP))
return 0;
if (chip->flags & TPM_CHIP_FLAG_TPM2)
rc = tpm2_auto_startup(chip);
else
rc = tpm1_auto_startup(chip);
return rc;
}
/*
* We are about to suspend. Save the TPM state
* so that it can be restored.
*/
int tpm_pm_suspend(struct device *dev)
{
struct tpm_chip *chip = dev_get_drvdata(dev);
int rc = 0;
if (!chip)
return -ENODEV;
if (chip->flags & TPM_CHIP_FLAG_ALWAYS_POWERED)
return 0;
if (chip->flags & TPM_CHIP_FLAG_TPM2)
tpm2_shutdown(chip, TPM2_SU_STATE);
else
rc = tpm1_pm_suspend(chip, tpm_suspend_pcr);
TPM: Retry SaveState command in suspend path If the TPM has already been sent a SaveState command before the driver is loaded it may have problems sending that same command again later. This issue is seen with the Chromebook Pixel due to a firmware bug in the legacy mode boot path which is sending the SaveState command before booting the kernel. More information is available at http://crbug.com/203524 This change introduces a retry of the SaveState command in the suspend path in order to work around this issue. A future firmware update should fix this but this is also a trivial workaround in the driver that has no effect on systems that do not show this problem. When this does happen the TPM responds with a non-fatal TPM_RETRY code that is defined in the specification: The TPM is too busy to respond to the command immediately, but the command could be resubmitted at a later time. The TPM MAY return TPM_RETRY for any command at any time. It can take several seconds before the TPM will respond again. I measured a typical time between 3 and 4 seconds and the timeout is set at a safe 5 seconds. It is also possible to reproduce this with commands via /dev/tpm0. The bug linked above has a python script attached which can be used to test for this problem. I tested a variety of TPMs from Infineon, Nuvoton, Atmel, and STMicro but was only able to reproduce this with LPC and I2C TPMs from Infineon. The TPM specification only loosely defines this behavior: TPM Main Level 2 Part 3 v1.2 r116, section 3.3. TPM_SaveState: The TPM MAY declare all preserved values invalid in response to any command other than TPM_Init. TCG PC Client BIOS Spec 1.21 section 8.3.1. After issuing a TPM_SaveState command, the OS SHOULD NOT issue TPM commands before transitioning to S3 without issuing another TPM_SaveState command. TCG PC Client TIS 1.21, section 4. Power Management: The TPM_SaveState command allows a Static OS to indicate to the TPM that the platform may enter a low power state where the TPM will be required to enter into the D3 power state. The use of the term "may" is significant in that there is no requirement for the platform to actually enter the low power state after sending the TPM_SaveState command. The software may, in fact, send subsequent commands after sending the TPM_SaveState command. Change-Id: I52b41e826412688e5b6c8ddd3bb16409939704e9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-03-18 05:56:39 +08:00
return rc;
}
EXPORT_SYMBOL_GPL(tpm_pm_suspend);
/*
* Resume from a power safe. The BIOS already restored
* the TPM state.
*/
int tpm_pm_resume(struct device *dev)
{
struct tpm_chip *chip = dev_get_drvdata(dev);
if (chip == NULL)
return -ENODEV;
return 0;
}
EXPORT_SYMBOL_GPL(tpm_pm_resume);
/**
* tpm_get_random() - get random bytes from the TPM's RNG
* @chip: a &struct tpm_chip instance, %NULL for the default chip
* @out: destination buffer for the random bytes
* @max: the max number of bytes to write to @out
*
* Return: same as with tpm_transmit_cmd()
*/
int tpm_get_random(struct tpm_chip *chip, u8 *out, size_t max)
{
int rc;
if (!out || max > TPM_MAX_RNG_DATA)
return -EINVAL;
chip = tpm_find_get_ops(chip);
if (!chip)
return -ENODEV;
if (chip->flags & TPM_CHIP_FLAG_TPM2)
rc = tpm2_get_random(chip, out, max);
else
rc = tpm1_get_random(chip, out, max);
tpm_put_ops(chip);
return rc;
}
EXPORT_SYMBOL_GPL(tpm_get_random);
/**
* tpm_seal_trusted() - seal a trusted key payload
* @chip: a &struct tpm_chip instance, %NULL for the default chip
* @options: authentication values and other options
* @payload: the key data in clear and encrypted form
*
* Note: only TPM 2.0 chip are supported. TPM 1.x implementation is located in
* the keyring subsystem.
*
* Return: same as with tpm_transmit_cmd()
*/
int tpm_seal_trusted(struct tpm_chip *chip, struct trusted_key_payload *payload,
struct trusted_key_options *options)
{
int rc;
chip = tpm_find_get_ops(chip);
if (!chip || !(chip->flags & TPM_CHIP_FLAG_TPM2))
return -ENODEV;
rc = tpm2_seal_trusted(chip, payload, options);
tpm_put_ops(chip);
return rc;
}
EXPORT_SYMBOL_GPL(tpm_seal_trusted);
/**
* tpm_unseal_trusted() - unseal a trusted key
* @chip: a &struct tpm_chip instance, %NULL for the default chip
* @options: authentication values and other options
* @payload: the key data in clear and encrypted form
*
* Note: only TPM 2.0 chip are supported. TPM 1.x implementation is located in
* the keyring subsystem.
*
* Return: same as with tpm_transmit_cmd()
*/
int tpm_unseal_trusted(struct tpm_chip *chip,
struct trusted_key_payload *payload,
struct trusted_key_options *options)
{
int rc;
chip = tpm_find_get_ops(chip);
if (!chip || !(chip->flags & TPM_CHIP_FLAG_TPM2))
return -ENODEV;
rc = tpm2_unseal_trusted(chip, payload, options);
tpm_put_ops(chip);
return rc;
}
EXPORT_SYMBOL_GPL(tpm_unseal_trusted);
static int __init tpm_init(void)
{
int rc;
tpm_class = class_create(THIS_MODULE, "tpm");
if (IS_ERR(tpm_class)) {
pr_err("couldn't create tpm class\n");
return PTR_ERR(tpm_class);
}
tpmrm_class = class_create(THIS_MODULE, "tpmrm");
if (IS_ERR(tpmrm_class)) {
pr_err("couldn't create tpmrm class\n");
rc = PTR_ERR(tpmrm_class);
goto out_destroy_tpm_class;
}
rc = alloc_chrdev_region(&tpm_devt, 0, 2*TPM_NUM_DEVICES, "tpm");
if (rc < 0) {
pr_err("tpm: failed to allocate char dev region\n");
goto out_destroy_tpmrm_class;
}
rc = tpm_dev_common_init();
if (rc) {
pr_err("tpm: failed to allocate char dev region\n");
goto out_unreg_chrdev;
}
return 0;
out_unreg_chrdev:
unregister_chrdev_region(tpm_devt, 2 * TPM_NUM_DEVICES);
out_destroy_tpmrm_class:
class_destroy(tpmrm_class);
out_destroy_tpm_class:
class_destroy(tpm_class);
return rc;
}
static void __exit tpm_exit(void)
{
idr_destroy(&dev_nums_idr);
class_destroy(tpm_class);
class_destroy(tpmrm_class);
unregister_chrdev_region(tpm_devt, 2*TPM_NUM_DEVICES);
tpm_dev_common_exit();
}
subsys_initcall(tpm_init);
module_exit(tpm_exit);
MODULE_AUTHOR("Leendert van Doorn (leendert@watson.ibm.com)");
MODULE_DESCRIPTION("TPM Driver");
MODULE_VERSION("2.0");
MODULE_LICENSE("GPL");