UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/net/ncsi/ncsi-rsp.c

1049 lines
27 KiB
C
Raw Normal View History

net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
/*
* Copyright Gavin Shan, IBM Corporation 2016.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <net/ncsi.h>
#include <net/net_namespace.h>
#include <net/sock.h>
#include "internal.h"
#include "ncsi-pkt.h"
static int ncsi_validate_rsp_pkt(struct ncsi_request *nr,
unsigned short payload)
{
struct ncsi_rsp_pkt_hdr *h;
u32 checksum;
__be32 *pchecksum;
/* Check NCSI packet header. We don't need validate
* the packet type, which should have been checked
* before calling this function.
*/
h = (struct ncsi_rsp_pkt_hdr *)skb_network_header(nr->rsp);
if (h->common.revision != NCSI_PKT_REVISION)
return -EINVAL;
if (ntohs(h->common.length) != payload)
return -EINVAL;
/* Check on code and reason */
if (ntohs(h->code) != NCSI_PKT_RSP_C_COMPLETED ||
ntohs(h->reason) != NCSI_PKT_RSP_R_NO_ERROR)
return -EINVAL;
/* Validate checksum, which might be zeroes if the
* sender doesn't support checksum according to NCSI
* specification.
*/
pchecksum = (__be32 *)((void *)(h + 1) + payload - 4);
if (ntohl(*pchecksum) == 0)
return 0;
checksum = ncsi_calculate_checksum((unsigned char *)h,
sizeof(*h) + payload - 4);
if (*pchecksum != htonl(checksum))
return -EINVAL;
return 0;
}
static int ncsi_rsp_handler_cis(struct ncsi_request *nr)
{
struct ncsi_rsp_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_package *np;
struct ncsi_channel *nc;
unsigned char id;
rsp = (struct ncsi_rsp_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel, &np, &nc);
if (!nc) {
net/ncsi: Package and channel management This manages NCSI packages and channels: * The available packages and channels are enumerated in the first time of calling ncsi_start_dev(). The channels' capabilities are probed in the meanwhile. The NCSI network topology won't change until the NCSI device is destroyed. * There in a queue in every NCSI device. The element in the queue, channel, is waiting for configuration (bringup) or suspending (teardown). The channel's state (inactive/active) indicates the futher action (configuration or suspending) will be applied on the channel. Another channel's state (invisible) means the requested action is being applied. * The hardware arbitration will be enabled if all available packages and channels support it. All available channels try to provide service when hardware arbitration is enabled. Otherwise, one channel is selected as the active one at once. * When channel is in active state, meaning it's providing service, a timer started to retrieve the channe's link status. If the channel's link status fails to be updated in the determined period, the channel is going to be reconfigured. It's the error handling implementation as defined in NCSI spec. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:19 +08:00
if (ndp->flags & NCSI_DEV_PROBED)
return -ENXIO;
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
id = NCSI_CHANNEL_INDEX(rsp->rsp.common.channel);
nc = ncsi_add_channel(np, id);
}
return nc ? 0 : -ENODEV;
}
static int ncsi_rsp_handler_sp(struct ncsi_request *nr)
{
struct ncsi_rsp_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_package *np;
unsigned char id;
/* Add the package if it's not existing. Otherwise,
* to change the state of its child channels.
*/
rsp = (struct ncsi_rsp_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
&np, NULL);
if (!np) {
net/ncsi: Package and channel management This manages NCSI packages and channels: * The available packages and channels are enumerated in the first time of calling ncsi_start_dev(). The channels' capabilities are probed in the meanwhile. The NCSI network topology won't change until the NCSI device is destroyed. * There in a queue in every NCSI device. The element in the queue, channel, is waiting for configuration (bringup) or suspending (teardown). The channel's state (inactive/active) indicates the futher action (configuration or suspending) will be applied on the channel. Another channel's state (invisible) means the requested action is being applied. * The hardware arbitration will be enabled if all available packages and channels support it. All available channels try to provide service when hardware arbitration is enabled. Otherwise, one channel is selected as the active one at once. * When channel is in active state, meaning it's providing service, a timer started to retrieve the channe's link status. If the channel's link status fails to be updated in the determined period, the channel is going to be reconfigured. It's the error handling implementation as defined in NCSI spec. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:19 +08:00
if (ndp->flags & NCSI_DEV_PROBED)
return -ENXIO;
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
id = NCSI_PACKAGE_INDEX(rsp->rsp.common.channel);
np = ncsi_add_package(ndp, id);
if (!np)
return -ENODEV;
}
return 0;
}
static int ncsi_rsp_handler_dp(struct ncsi_request *nr)
{
struct ncsi_rsp_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_package *np;
struct ncsi_channel *nc;
unsigned long flags;
/* Find the package */
rsp = (struct ncsi_rsp_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
&np, NULL);
if (!np)
return -ENODEV;
/* Change state of all channels attached to the package */
NCSI_FOR_EACH_CHANNEL(np, nc) {
spin_lock_irqsave(&nc->lock, flags);
nc->state = NCSI_CHANNEL_INACTIVE;
spin_unlock_irqrestore(&nc->lock, flags);
}
return 0;
}
static int ncsi_rsp_handler_ec(struct ncsi_request *nr)
{
struct ncsi_rsp_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
struct ncsi_channel_mode *ncm;
/* Find the package and channel */
rsp = (struct ncsi_rsp_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
NULL, &nc);
if (!nc)
return -ENODEV;
ncm = &nc->modes[NCSI_MODE_ENABLE];
if (ncm->enable)
net/ncsi: Don't return error on normal response Several response handlers return EBUSY if the data corresponding to the command/response pair is already set. There is no reason to return an error here; the channel is advertising something as enabled because we told it to enable it, and it's possible that the feature has been enabled previously. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08 13:30:45 +08:00
return 0;
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
ncm->enable = 1;
return 0;
}
static int ncsi_rsp_handler_dc(struct ncsi_request *nr)
{
struct ncsi_rsp_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
struct ncsi_channel_mode *ncm;
int ret;
ret = ncsi_validate_rsp_pkt(nr, 4);
if (ret)
return ret;
/* Find the package and channel */
rsp = (struct ncsi_rsp_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
NULL, &nc);
if (!nc)
return -ENODEV;
ncm = &nc->modes[NCSI_MODE_ENABLE];
if (!ncm->enable)
net/ncsi: Don't return error on normal response Several response handlers return EBUSY if the data corresponding to the command/response pair is already set. There is no reason to return an error here; the channel is advertising something as enabled because we told it to enable it, and it's possible that the feature has been enabled previously. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08 13:30:45 +08:00
return 0;
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
ncm->enable = 0;
return 0;
}
static int ncsi_rsp_handler_rc(struct ncsi_request *nr)
{
struct ncsi_rsp_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
unsigned long flags;
/* Find the package and channel */
rsp = (struct ncsi_rsp_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
NULL, &nc);
if (!nc)
return -ENODEV;
/* Update state for the specified channel */
spin_lock_irqsave(&nc->lock, flags);
nc->state = NCSI_CHANNEL_INACTIVE;
spin_unlock_irqrestore(&nc->lock, flags);
return 0;
}
static int ncsi_rsp_handler_ecnt(struct ncsi_request *nr)
{
struct ncsi_rsp_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
struct ncsi_channel_mode *ncm;
/* Find the package and channel */
rsp = (struct ncsi_rsp_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
NULL, &nc);
if (!nc)
return -ENODEV;
ncm = &nc->modes[NCSI_MODE_TX_ENABLE];
if (ncm->enable)
net/ncsi: Don't return error on normal response Several response handlers return EBUSY if the data corresponding to the command/response pair is already set. There is no reason to return an error here; the channel is advertising something as enabled because we told it to enable it, and it's possible that the feature has been enabled previously. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08 13:30:45 +08:00
return 0;
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
ncm->enable = 1;
return 0;
}
static int ncsi_rsp_handler_dcnt(struct ncsi_request *nr)
{
struct ncsi_rsp_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
struct ncsi_channel_mode *ncm;
/* Find the package and channel */
rsp = (struct ncsi_rsp_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
NULL, &nc);
if (!nc)
return -ENODEV;
ncm = &nc->modes[NCSI_MODE_TX_ENABLE];
if (!ncm->enable)
net/ncsi: Don't return error on normal response Several response handlers return EBUSY if the data corresponding to the command/response pair is already set. There is no reason to return an error here; the channel is advertising something as enabled because we told it to enable it, and it's possible that the feature has been enabled previously. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08 13:30:45 +08:00
return 0;
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
ncm->enable = 1;
return 0;
}
static int ncsi_rsp_handler_ae(struct ncsi_request *nr)
{
struct ncsi_cmd_ae_pkt *cmd;
struct ncsi_rsp_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
struct ncsi_channel_mode *ncm;
/* Find the package and channel */
rsp = (struct ncsi_rsp_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
NULL, &nc);
if (!nc)
return -ENODEV;
/* Check if the AEN has been enabled */
ncm = &nc->modes[NCSI_MODE_AEN];
if (ncm->enable)
net/ncsi: Don't return error on normal response Several response handlers return EBUSY if the data corresponding to the command/response pair is already set. There is no reason to return an error here; the channel is advertising something as enabled because we told it to enable it, and it's possible that the feature has been enabled previously. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08 13:30:45 +08:00
return 0;
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
/* Update to AEN configuration */
cmd = (struct ncsi_cmd_ae_pkt *)skb_network_header(nr->cmd);
ncm->enable = 1;
ncm->data[0] = cmd->mc_id;
ncm->data[1] = ntohl(cmd->mode);
return 0;
}
static int ncsi_rsp_handler_sl(struct ncsi_request *nr)
{
struct ncsi_cmd_sl_pkt *cmd;
struct ncsi_rsp_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
struct ncsi_channel_mode *ncm;
/* Find the package and channel */
rsp = (struct ncsi_rsp_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
NULL, &nc);
if (!nc)
return -ENODEV;
cmd = (struct ncsi_cmd_sl_pkt *)skb_network_header(nr->cmd);
ncm = &nc->modes[NCSI_MODE_LINK];
ncm->data[0] = ntohl(cmd->mode);
ncm->data[1] = ntohl(cmd->oem_mode);
return 0;
}
static int ncsi_rsp_handler_gls(struct ncsi_request *nr)
{
struct ncsi_rsp_gls_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
struct ncsi_channel_mode *ncm;
net/ncsi: Package and channel management This manages NCSI packages and channels: * The available packages and channels are enumerated in the first time of calling ncsi_start_dev(). The channels' capabilities are probed in the meanwhile. The NCSI network topology won't change until the NCSI device is destroyed. * There in a queue in every NCSI device. The element in the queue, channel, is waiting for configuration (bringup) or suspending (teardown). The channel's state (inactive/active) indicates the futher action (configuration or suspending) will be applied on the channel. Another channel's state (invisible) means the requested action is being applied. * The hardware arbitration will be enabled if all available packages and channels support it. All available channels try to provide service when hardware arbitration is enabled. Otherwise, one channel is selected as the active one at once. * When channel is in active state, meaning it's providing service, a timer started to retrieve the channe's link status. If the channel's link status fails to be updated in the determined period, the channel is going to be reconfigured. It's the error handling implementation as defined in NCSI spec. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:19 +08:00
unsigned long flags;
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
/* Find the package and channel */
rsp = (struct ncsi_rsp_gls_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
NULL, &nc);
if (!nc)
return -ENODEV;
ncm = &nc->modes[NCSI_MODE_LINK];
ncm->data[2] = ntohl(rsp->status);
ncm->data[3] = ntohl(rsp->other);
ncm->data[4] = ntohl(rsp->oem_status);
net/ncsi: Allow to extend NCSI request properties There is only one NCSI request property for now: the response for the sent command need drive the workqueue or not. So we had one field (@driven) for the purpose. We lost the flexibility to extend NCSI request properties. This replaces @driven with @flags and @req_flags in NCSI request and NCSI command argument struct. Each bit of the newly introduced field can be used for one property. No functional changes introduced. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-04 08:25:51 +08:00
if (nr->flags & NCSI_REQ_FLAG_EVENT_DRIVEN)
net/ncsi: Package and channel management This manages NCSI packages and channels: * The available packages and channels are enumerated in the first time of calling ncsi_start_dev(). The channels' capabilities are probed in the meanwhile. The NCSI network topology won't change until the NCSI device is destroyed. * There in a queue in every NCSI device. The element in the queue, channel, is waiting for configuration (bringup) or suspending (teardown). The channel's state (inactive/active) indicates the futher action (configuration or suspending) will be applied on the channel. Another channel's state (invisible) means the requested action is being applied. * The hardware arbitration will be enabled if all available packages and channels support it. All available channels try to provide service when hardware arbitration is enabled. Otherwise, one channel is selected as the active one at once. * When channel is in active state, meaning it's providing service, a timer started to retrieve the channe's link status. If the channel's link status fails to be updated in the determined period, the channel is going to be reconfigured. It's the error handling implementation as defined in NCSI spec. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:19 +08:00
return 0;
/* Reset the channel monitor if it has been enabled */
spin_lock_irqsave(&nc->lock, flags);
net/ncsi: Rework the channel monitoring The original NCSI channel monitoring was implemented based on a backoff algorithm: the GLS response should be received in the specified interval. Otherwise, the channel is regarded as dead and failover should be taken if current channel is an active one. There are several problems in the implementation: (A) On BCM5718, we found when the IID (Instance ID) in the GLS command packet changes from 255 to 1, the response corresponding to IID#1 never comes in. It means we cannot make the unfair judgement that the channel is dead when one response is missed. (B) The code's readability should be improved. (C) We should do failover when current channel is active one and the channel monitoring should be marked as disabled before doing failover. This reworks the channel monitoring to address all above issues. The fields for channel monitoring is put into separate struct and the state of channel monitoring is predefined. The channel is regarded alive if the network controller responses to one of two GLS commands or both of them in 5 seconds. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-04 08:25:52 +08:00
nc->monitor.state = NCSI_CHANNEL_MONITOR_START;
net/ncsi: Package and channel management This manages NCSI packages and channels: * The available packages and channels are enumerated in the first time of calling ncsi_start_dev(). The channels' capabilities are probed in the meanwhile. The NCSI network topology won't change until the NCSI device is destroyed. * There in a queue in every NCSI device. The element in the queue, channel, is waiting for configuration (bringup) or suspending (teardown). The channel's state (inactive/active) indicates the futher action (configuration or suspending) will be applied on the channel. Another channel's state (invisible) means the requested action is being applied. * The hardware arbitration will be enabled if all available packages and channels support it. All available channels try to provide service when hardware arbitration is enabled. Otherwise, one channel is selected as the active one at once. * When channel is in active state, meaning it's providing service, a timer started to retrieve the channe's link status. If the channel's link status fails to be updated in the determined period, the channel is going to be reconfigured. It's the error handling implementation as defined in NCSI spec. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:19 +08:00
spin_unlock_irqrestore(&nc->lock, flags);
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
return 0;
}
static int ncsi_rsp_handler_svf(struct ncsi_request *nr)
{
struct ncsi_cmd_svf_pkt *cmd;
struct ncsi_rsp_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
struct ncsi_channel_filter *ncf;
unsigned short vlan;
int ret;
/* Find the package and channel */
rsp = (struct ncsi_rsp_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
NULL, &nc);
if (!nc)
return -ENODEV;
cmd = (struct ncsi_cmd_svf_pkt *)skb_network_header(nr->cmd);
ncf = nc->filters[NCSI_FILTER_VLAN];
if (!ncf)
return -ENOENT;
if (cmd->index >= ncf->total)
return -ERANGE;
/* Add or remove the VLAN filter */
if (!(cmd->enable & 0x1)) {
net/ncsi: Fix several packet definitions Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 14:18:41 +08:00
/* HW indexes from 1 */
ret = ncsi_remove_filter(nc, NCSI_FILTER_VLAN, cmd->index - 1);
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
} else {
vlan = ntohs(cmd->vlan);
ret = ncsi_add_filter(nc, NCSI_FILTER_VLAN, &vlan);
}
return ret;
}
static int ncsi_rsp_handler_ev(struct ncsi_request *nr)
{
struct ncsi_cmd_ev_pkt *cmd;
struct ncsi_rsp_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
struct ncsi_channel_mode *ncm;
/* Find the package and channel */
rsp = (struct ncsi_rsp_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
NULL, &nc);
if (!nc)
return -ENODEV;
/* Check if VLAN mode has been enabled */
ncm = &nc->modes[NCSI_MODE_VLAN];
if (ncm->enable)
net/ncsi: Don't return error on normal response Several response handlers return EBUSY if the data corresponding to the command/response pair is already set. There is no reason to return an error here; the channel is advertising something as enabled because we told it to enable it, and it's possible that the feature has been enabled previously. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08 13:30:45 +08:00
return 0;
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
/* Update to VLAN mode */
cmd = (struct ncsi_cmd_ev_pkt *)skb_network_header(nr->cmd);
ncm->enable = 1;
ncm->data[0] = ntohl(cmd->mode);
return 0;
}
static int ncsi_rsp_handler_dv(struct ncsi_request *nr)
{
struct ncsi_rsp_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
struct ncsi_channel_mode *ncm;
/* Find the package and channel */
rsp = (struct ncsi_rsp_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
NULL, &nc);
if (!nc)
return -ENODEV;
/* Check if VLAN mode has been enabled */
ncm = &nc->modes[NCSI_MODE_VLAN];
if (!ncm->enable)
net/ncsi: Don't return error on normal response Several response handlers return EBUSY if the data corresponding to the command/response pair is already set. There is no reason to return an error here; the channel is advertising something as enabled because we told it to enable it, and it's possible that the feature has been enabled previously. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08 13:30:45 +08:00
return 0;
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
/* Update to VLAN mode */
ncm->enable = 0;
return 0;
}
static int ncsi_rsp_handler_sma(struct ncsi_request *nr)
{
struct ncsi_cmd_sma_pkt *cmd;
struct ncsi_rsp_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
struct ncsi_channel_filter *ncf;
void *bitmap;
/* Find the package and channel */
rsp = (struct ncsi_rsp_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
NULL, &nc);
if (!nc)
return -ENODEV;
/* According to NCSI spec 1.01, the mixed filter table
* isn't supported yet.
*/
cmd = (struct ncsi_cmd_sma_pkt *)skb_network_header(nr->cmd);
switch (cmd->at_e >> 5) {
case 0x0: /* UC address */
ncf = nc->filters[NCSI_FILTER_UC];
break;
case 0x1: /* MC address */
ncf = nc->filters[NCSI_FILTER_MC];
break;
default:
return -EINVAL;
}
/* Sanity check on the filter */
if (!ncf)
return -ENOENT;
else if (cmd->index >= ncf->total)
return -ERANGE;
bitmap = &ncf->bitmap;
if (cmd->at_e & 0x1) {
net/ncsi: Don't return error on normal response Several response handlers return EBUSY if the data corresponding to the command/response pair is already set. There is no reason to return an error here; the channel is advertising something as enabled because we told it to enable it, and it's possible that the feature has been enabled previously. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08 13:30:45 +08:00
set_bit(cmd->index, bitmap);
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
memcpy(ncf->data + 6 * cmd->index, cmd->mac, 6);
} else {
net/ncsi: Don't return error on normal response Several response handlers return EBUSY if the data corresponding to the command/response pair is already set. There is no reason to return an error here; the channel is advertising something as enabled because we told it to enable it, and it's possible that the feature has been enabled previously. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08 13:30:45 +08:00
clear_bit(cmd->index, bitmap);
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
memset(ncf->data + 6 * cmd->index, 0, 6);
}
return 0;
}
static int ncsi_rsp_handler_ebf(struct ncsi_request *nr)
{
struct ncsi_cmd_ebf_pkt *cmd;
struct ncsi_rsp_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
struct ncsi_channel_mode *ncm;
/* Find the package and channel */
rsp = (struct ncsi_rsp_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel, NULL, &nc);
if (!nc)
return -ENODEV;
/* Check if broadcast filter has been enabled */
ncm = &nc->modes[NCSI_MODE_BC];
if (ncm->enable)
net/ncsi: Don't return error on normal response Several response handlers return EBUSY if the data corresponding to the command/response pair is already set. There is no reason to return an error here; the channel is advertising something as enabled because we told it to enable it, and it's possible that the feature has been enabled previously. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08 13:30:45 +08:00
return 0;
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
/* Update to broadcast filter mode */
cmd = (struct ncsi_cmd_ebf_pkt *)skb_network_header(nr->cmd);
ncm->enable = 1;
ncm->data[0] = ntohl(cmd->mode);
return 0;
}
static int ncsi_rsp_handler_dbf(struct ncsi_request *nr)
{
struct ncsi_rsp_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
struct ncsi_channel_mode *ncm;
rsp = (struct ncsi_rsp_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
NULL, &nc);
if (!nc)
return -ENODEV;
/* Check if broadcast filter isn't enabled */
ncm = &nc->modes[NCSI_MODE_BC];
if (!ncm->enable)
net/ncsi: Don't return error on normal response Several response handlers return EBUSY if the data corresponding to the command/response pair is already set. There is no reason to return an error here; the channel is advertising something as enabled because we told it to enable it, and it's possible that the feature has been enabled previously. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08 13:30:45 +08:00
return 0;
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
/* Update to broadcast filter mode */
ncm->enable = 0;
ncm->data[0] = 0;
return 0;
}
static int ncsi_rsp_handler_egmf(struct ncsi_request *nr)
{
struct ncsi_cmd_egmf_pkt *cmd;
struct ncsi_rsp_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
struct ncsi_channel_mode *ncm;
/* Find the channel */
rsp = (struct ncsi_rsp_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
NULL, &nc);
if (!nc)
return -ENODEV;
/* Check if multicast filter has been enabled */
ncm = &nc->modes[NCSI_MODE_MC];
if (ncm->enable)
net/ncsi: Don't return error on normal response Several response handlers return EBUSY if the data corresponding to the command/response pair is already set. There is no reason to return an error here; the channel is advertising something as enabled because we told it to enable it, and it's possible that the feature has been enabled previously. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08 13:30:45 +08:00
return 0;
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
/* Update to multicast filter mode */
cmd = (struct ncsi_cmd_egmf_pkt *)skb_network_header(nr->cmd);
ncm->enable = 1;
ncm->data[0] = ntohl(cmd->mode);
return 0;
}
static int ncsi_rsp_handler_dgmf(struct ncsi_request *nr)
{
struct ncsi_rsp_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
struct ncsi_channel_mode *ncm;
rsp = (struct ncsi_rsp_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
NULL, &nc);
if (!nc)
return -ENODEV;
/* Check if multicast filter has been enabled */
ncm = &nc->modes[NCSI_MODE_MC];
if (!ncm->enable)
net/ncsi: Don't return error on normal response Several response handlers return EBUSY if the data corresponding to the command/response pair is already set. There is no reason to return an error here; the channel is advertising something as enabled because we told it to enable it, and it's possible that the feature has been enabled previously. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08 13:30:45 +08:00
return 0;
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
/* Update to multicast filter mode */
ncm->enable = 0;
ncm->data[0] = 0;
return 0;
}
static int ncsi_rsp_handler_snfc(struct ncsi_request *nr)
{
struct ncsi_cmd_snfc_pkt *cmd;
struct ncsi_rsp_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
struct ncsi_channel_mode *ncm;
/* Find the channel */
rsp = (struct ncsi_rsp_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
NULL, &nc);
if (!nc)
return -ENODEV;
/* Check if flow control has been enabled */
ncm = &nc->modes[NCSI_MODE_FC];
if (ncm->enable)
net/ncsi: Don't return error on normal response Several response handlers return EBUSY if the data corresponding to the command/response pair is already set. There is no reason to return an error here; the channel is advertising something as enabled because we told it to enable it, and it's possible that the feature has been enabled previously. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08 13:30:45 +08:00
return 0;
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
/* Update to flow control mode */
cmd = (struct ncsi_cmd_snfc_pkt *)skb_network_header(nr->cmd);
ncm->enable = 1;
ncm->data[0] = cmd->mode;
return 0;
}
static int ncsi_rsp_handler_gvi(struct ncsi_request *nr)
{
struct ncsi_rsp_gvi_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
struct ncsi_channel_version *ncv;
int i;
/* Find the channel */
rsp = (struct ncsi_rsp_gvi_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
NULL, &nc);
if (!nc)
return -ENODEV;
/* Update to channel's version info */
ncv = &nc->version;
ncv->version = ntohl(rsp->ncsi_version);
ncv->alpha2 = rsp->alpha2;
memcpy(ncv->fw_name, rsp->fw_name, 12);
ncv->fw_version = ntohl(rsp->fw_version);
for (i = 0; i < ARRAY_SIZE(ncv->pci_ids); i++)
ncv->pci_ids[i] = ntohs(rsp->pci_ids[i]);
ncv->mf_id = ntohl(rsp->mf_id);
return 0;
}
static int ncsi_rsp_handler_gc(struct ncsi_request *nr)
{
struct ncsi_rsp_gc_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
struct ncsi_channel_filter *ncf;
size_t size, entry_size;
int cnt, i;
/* Find the channel */
rsp = (struct ncsi_rsp_gc_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
NULL, &nc);
if (!nc)
return -ENODEV;
/* Update channel's capabilities */
nc->caps[NCSI_CAP_GENERIC].cap = ntohl(rsp->cap) &
NCSI_CAP_GENERIC_MASK;
nc->caps[NCSI_CAP_BC].cap = ntohl(rsp->bc_cap) &
NCSI_CAP_BC_MASK;
nc->caps[NCSI_CAP_MC].cap = ntohl(rsp->mc_cap) &
NCSI_CAP_MC_MASK;
nc->caps[NCSI_CAP_BUFFER].cap = ntohl(rsp->buf_cap);
nc->caps[NCSI_CAP_AEN].cap = ntohl(rsp->aen_cap) &
NCSI_CAP_AEN_MASK;
nc->caps[NCSI_CAP_VLAN].cap = rsp->vlan_mode &
NCSI_CAP_VLAN_MASK;
/* Build filters */
for (i = 0; i < NCSI_FILTER_MAX; i++) {
switch (i) {
case NCSI_FILTER_VLAN:
cnt = rsp->vlan_cnt;
entry_size = 2;
break;
case NCSI_FILTER_MIXED:
cnt = rsp->mixed_cnt;
entry_size = 6;
break;
case NCSI_FILTER_MC:
cnt = rsp->mc_cnt;
entry_size = 6;
break;
case NCSI_FILTER_UC:
cnt = rsp->uc_cnt;
entry_size = 6;
break;
default:
continue;
}
if (!cnt || nc->filters[i])
continue;
size = sizeof(*ncf) + cnt * entry_size;
ncf = kzalloc(size, GFP_ATOMIC);
if (!ncf) {
pr_warn("%s: Cannot alloc filter table (%d)\n",
__func__, i);
return -ENOMEM;
}
ncf->index = i;
ncf->total = cnt;
net/ncsi: Configure VLAN tag filter Make use of the ndo_vlan_rx_{add,kill}_vid callbacks to have the NCSI stack process new VLAN tags and configure the channel VLAN filter appropriately. Several VLAN tags can be set and a "Set VLAN Filter" packet must be sent for each one, meaning the ncsi_dev_state_config_svf state must be repeated. An internal list of VLAN tags is maintained, and compared against the current channel's ncsi_channel_filter in order to keep track within the state. VLAN filters are removed in a similar manner, with the introduction of the ncsi_dev_state_config_clear_vids state. The maximum number of VLAN tag filters is determined by the "Get Capabilities" response from the channel. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 14:18:42 +08:00
if (i == NCSI_FILTER_VLAN) {
/* Set VLAN filters active so they are cleared in
* first configuration state
*/
ncf->bitmap = U64_MAX;
} else {
ncf->bitmap = 0x0ul;
}
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
nc->filters[i] = ncf;
}
return 0;
}
static int ncsi_rsp_handler_gp(struct ncsi_request *nr)
{
struct ncsi_rsp_gp_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
unsigned short enable, vlan;
unsigned char *pdata;
int table, i;
/* Find the channel */
rsp = (struct ncsi_rsp_gp_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
NULL, &nc);
if (!nc)
return -ENODEV;
/* Modes with explicit enabled indications */
if (ntohl(rsp->valid_modes) & 0x1) { /* BC filter mode */
nc->modes[NCSI_MODE_BC].enable = 1;
nc->modes[NCSI_MODE_BC].data[0] = ntohl(rsp->bc_mode);
}
if (ntohl(rsp->valid_modes) & 0x2) /* Channel enabled */
nc->modes[NCSI_MODE_ENABLE].enable = 1;
if (ntohl(rsp->valid_modes) & 0x4) /* Channel Tx enabled */
nc->modes[NCSI_MODE_TX_ENABLE].enable = 1;
if (ntohl(rsp->valid_modes) & 0x8) /* MC filter mode */
nc->modes[NCSI_MODE_MC].enable = 1;
/* Modes without explicit enabled indications */
nc->modes[NCSI_MODE_LINK].enable = 1;
nc->modes[NCSI_MODE_LINK].data[0] = ntohl(rsp->link_mode);
nc->modes[NCSI_MODE_VLAN].enable = 1;
nc->modes[NCSI_MODE_VLAN].data[0] = rsp->vlan_mode;
nc->modes[NCSI_MODE_FC].enable = 1;
nc->modes[NCSI_MODE_FC].data[0] = rsp->fc_mode;
nc->modes[NCSI_MODE_AEN].enable = 1;
nc->modes[NCSI_MODE_AEN].data[0] = ntohl(rsp->aen_mode);
/* MAC addresses filter table */
pdata = (unsigned char *)rsp + 48;
enable = rsp->mac_enable;
for (i = 0; i < rsp->mac_cnt; i++, pdata += 6) {
if (i >= (nc->filters[NCSI_FILTER_UC]->total +
nc->filters[NCSI_FILTER_MC]->total))
table = NCSI_FILTER_MIXED;
else if (i >= nc->filters[NCSI_FILTER_UC]->total)
table = NCSI_FILTER_MC;
else
table = NCSI_FILTER_UC;
if (!(enable & (0x1 << i)))
continue;
if (ncsi_find_filter(nc, table, pdata) >= 0)
continue;
ncsi_add_filter(nc, table, pdata);
}
/* VLAN filter table */
enable = ntohs(rsp->vlan_enable);
for (i = 0; i < rsp->vlan_cnt; i++, pdata += 2) {
if (!(enable & (0x1 << i)))
continue;
vlan = ntohs(*(__be16 *)pdata);
if (ncsi_find_filter(nc, NCSI_FILTER_VLAN, &vlan) >= 0)
continue;
ncsi_add_filter(nc, NCSI_FILTER_VLAN, &vlan);
}
return 0;
}
static int ncsi_rsp_handler_gcps(struct ncsi_request *nr)
{
struct ncsi_rsp_gcps_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
struct ncsi_channel_stats *ncs;
/* Find the channel */
rsp = (struct ncsi_rsp_gcps_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
NULL, &nc);
if (!nc)
return -ENODEV;
/* Update HNC's statistics */
ncs = &nc->stats;
ncs->hnc_cnt_hi = ntohl(rsp->cnt_hi);
ncs->hnc_cnt_lo = ntohl(rsp->cnt_lo);
ncs->hnc_rx_bytes = ntohl(rsp->rx_bytes);
ncs->hnc_tx_bytes = ntohl(rsp->tx_bytes);
ncs->hnc_rx_uc_pkts = ntohl(rsp->rx_uc_pkts);
ncs->hnc_rx_mc_pkts = ntohl(rsp->rx_mc_pkts);
ncs->hnc_rx_bc_pkts = ntohl(rsp->rx_bc_pkts);
ncs->hnc_tx_uc_pkts = ntohl(rsp->tx_uc_pkts);
ncs->hnc_tx_mc_pkts = ntohl(rsp->tx_mc_pkts);
ncs->hnc_tx_bc_pkts = ntohl(rsp->tx_bc_pkts);
ncs->hnc_fcs_err = ntohl(rsp->fcs_err);
ncs->hnc_align_err = ntohl(rsp->align_err);
ncs->hnc_false_carrier = ntohl(rsp->false_carrier);
ncs->hnc_runt_pkts = ntohl(rsp->runt_pkts);
ncs->hnc_jabber_pkts = ntohl(rsp->jabber_pkts);
ncs->hnc_rx_pause_xon = ntohl(rsp->rx_pause_xon);
ncs->hnc_rx_pause_xoff = ntohl(rsp->rx_pause_xoff);
ncs->hnc_tx_pause_xon = ntohl(rsp->tx_pause_xon);
ncs->hnc_tx_pause_xoff = ntohl(rsp->tx_pause_xoff);
ncs->hnc_tx_s_collision = ntohl(rsp->tx_s_collision);
ncs->hnc_tx_m_collision = ntohl(rsp->tx_m_collision);
ncs->hnc_l_collision = ntohl(rsp->l_collision);
ncs->hnc_e_collision = ntohl(rsp->e_collision);
ncs->hnc_rx_ctl_frames = ntohl(rsp->rx_ctl_frames);
ncs->hnc_rx_64_frames = ntohl(rsp->rx_64_frames);
ncs->hnc_rx_127_frames = ntohl(rsp->rx_127_frames);
ncs->hnc_rx_255_frames = ntohl(rsp->rx_255_frames);
ncs->hnc_rx_511_frames = ntohl(rsp->rx_511_frames);
ncs->hnc_rx_1023_frames = ntohl(rsp->rx_1023_frames);
ncs->hnc_rx_1522_frames = ntohl(rsp->rx_1522_frames);
ncs->hnc_rx_9022_frames = ntohl(rsp->rx_9022_frames);
ncs->hnc_tx_64_frames = ntohl(rsp->tx_64_frames);
ncs->hnc_tx_127_frames = ntohl(rsp->tx_127_frames);
ncs->hnc_tx_255_frames = ntohl(rsp->tx_255_frames);
ncs->hnc_tx_511_frames = ntohl(rsp->tx_511_frames);
ncs->hnc_tx_1023_frames = ntohl(rsp->tx_1023_frames);
ncs->hnc_tx_1522_frames = ntohl(rsp->tx_1522_frames);
ncs->hnc_tx_9022_frames = ntohl(rsp->tx_9022_frames);
ncs->hnc_rx_valid_bytes = ntohl(rsp->rx_valid_bytes);
ncs->hnc_rx_runt_pkts = ntohl(rsp->rx_runt_pkts);
ncs->hnc_rx_jabber_pkts = ntohl(rsp->rx_jabber_pkts);
return 0;
}
static int ncsi_rsp_handler_gns(struct ncsi_request *nr)
{
struct ncsi_rsp_gns_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
struct ncsi_channel_stats *ncs;
/* Find the channel */
rsp = (struct ncsi_rsp_gns_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
NULL, &nc);
if (!nc)
return -ENODEV;
/* Update HNC's statistics */
ncs = &nc->stats;
ncs->ncsi_rx_cmds = ntohl(rsp->rx_cmds);
ncs->ncsi_dropped_cmds = ntohl(rsp->dropped_cmds);
ncs->ncsi_cmd_type_errs = ntohl(rsp->cmd_type_errs);
ncs->ncsi_cmd_csum_errs = ntohl(rsp->cmd_csum_errs);
ncs->ncsi_rx_pkts = ntohl(rsp->rx_pkts);
ncs->ncsi_tx_pkts = ntohl(rsp->tx_pkts);
ncs->ncsi_tx_aen_pkts = ntohl(rsp->tx_aen_pkts);
return 0;
}
static int ncsi_rsp_handler_gnpts(struct ncsi_request *nr)
{
struct ncsi_rsp_gnpts_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
struct ncsi_channel_stats *ncs;
/* Find the channel */
rsp = (struct ncsi_rsp_gnpts_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
NULL, &nc);
if (!nc)
return -ENODEV;
/* Update HNC's statistics */
ncs = &nc->stats;
ncs->pt_tx_pkts = ntohl(rsp->tx_pkts);
ncs->pt_tx_dropped = ntohl(rsp->tx_dropped);
ncs->pt_tx_channel_err = ntohl(rsp->tx_channel_err);
ncs->pt_tx_us_err = ntohl(rsp->tx_us_err);
ncs->pt_rx_pkts = ntohl(rsp->rx_pkts);
ncs->pt_rx_dropped = ntohl(rsp->rx_dropped);
ncs->pt_rx_channel_err = ntohl(rsp->rx_channel_err);
ncs->pt_rx_us_err = ntohl(rsp->rx_us_err);
ncs->pt_rx_os_err = ntohl(rsp->rx_os_err);
return 0;
}
static int ncsi_rsp_handler_gps(struct ncsi_request *nr)
{
struct ncsi_rsp_gps_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_package *np;
/* Find the package */
rsp = (struct ncsi_rsp_gps_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
&np, NULL);
if (!np)
return -ENODEV;
return 0;
}
static int ncsi_rsp_handler_gpuuid(struct ncsi_request *nr)
{
struct ncsi_rsp_gpuuid_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_package *np;
/* Find the package */
rsp = (struct ncsi_rsp_gpuuid_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
&np, NULL);
if (!np)
return -ENODEV;
memcpy(np->uuid, rsp->uuid, sizeof(rsp->uuid));
return 0;
}
static struct ncsi_rsp_handler {
unsigned char type;
int payload;
int (*handler)(struct ncsi_request *nr);
} ncsi_rsp_handlers[] = {
{ NCSI_PKT_RSP_CIS, 4, ncsi_rsp_handler_cis },
{ NCSI_PKT_RSP_SP, 4, ncsi_rsp_handler_sp },
{ NCSI_PKT_RSP_DP, 4, ncsi_rsp_handler_dp },
{ NCSI_PKT_RSP_EC, 4, ncsi_rsp_handler_ec },
{ NCSI_PKT_RSP_DC, 4, ncsi_rsp_handler_dc },
{ NCSI_PKT_RSP_RC, 4, ncsi_rsp_handler_rc },
{ NCSI_PKT_RSP_ECNT, 4, ncsi_rsp_handler_ecnt },
{ NCSI_PKT_RSP_DCNT, 4, ncsi_rsp_handler_dcnt },
{ NCSI_PKT_RSP_AE, 4, ncsi_rsp_handler_ae },
{ NCSI_PKT_RSP_SL, 4, ncsi_rsp_handler_sl },
{ NCSI_PKT_RSP_GLS, 16, ncsi_rsp_handler_gls },
{ NCSI_PKT_RSP_SVF, 4, ncsi_rsp_handler_svf },
{ NCSI_PKT_RSP_EV, 4, ncsi_rsp_handler_ev },
{ NCSI_PKT_RSP_DV, 4, ncsi_rsp_handler_dv },
{ NCSI_PKT_RSP_SMA, 4, ncsi_rsp_handler_sma },
{ NCSI_PKT_RSP_EBF, 4, ncsi_rsp_handler_ebf },
{ NCSI_PKT_RSP_DBF, 4, ncsi_rsp_handler_dbf },
{ NCSI_PKT_RSP_EGMF, 4, ncsi_rsp_handler_egmf },
{ NCSI_PKT_RSP_DGMF, 4, ncsi_rsp_handler_dgmf },
{ NCSI_PKT_RSP_SNFC, 4, ncsi_rsp_handler_snfc },
net/ncsi: Fix length of GVI response packet The length of GVI (GetVersionInfo) response packet should be 40 instead of 36. This issue was found from /sys/kernel/debug/ncsi/eth0/stats. # ethtool --ncsi eth0 swstats : RESPONSE OK TIMEOUT ERROR ======================================= GVI 0 0 2 With this applied, no error reported on GVI response packets: # ethtool --ncsi eth0 swstats : RESPONSE OK TIMEOUT ERROR ======================================= GVI 2 0 0 Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19 10:43:09 +08:00
{ NCSI_PKT_RSP_GVI, 40, ncsi_rsp_handler_gvi },
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
{ NCSI_PKT_RSP_GC, 32, ncsi_rsp_handler_gc },
{ NCSI_PKT_RSP_GP, -1, ncsi_rsp_handler_gp },
{ NCSI_PKT_RSP_GCPS, 172, ncsi_rsp_handler_gcps },
{ NCSI_PKT_RSP_GNS, 172, ncsi_rsp_handler_gns },
{ NCSI_PKT_RSP_GNPTS, 172, ncsi_rsp_handler_gnpts },
{ NCSI_PKT_RSP_GPS, 8, ncsi_rsp_handler_gps },
{ NCSI_PKT_RSP_OEM, 0, NULL },
{ NCSI_PKT_RSP_PLDM, 0, NULL },
{ NCSI_PKT_RSP_GPUUID, 20, ncsi_rsp_handler_gpuuid }
};
int ncsi_rcv_rsp(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt, struct net_device *orig_dev)
{
struct ncsi_rsp_handler *nrh = NULL;
struct ncsi_dev *nd;
struct ncsi_dev_priv *ndp;
struct ncsi_request *nr;
struct ncsi_pkt_hdr *hdr;
unsigned long flags;
int payload, i, ret;
/* Find the NCSI device */
nd = ncsi_find_dev(dev);
ndp = nd ? TO_NCSI_DEV_PRIV(nd) : NULL;
if (!ndp)
return -ENODEV;
net/ncsi: NCSI AEN packet handler This introduces NCSI AEN packet handlers that result in (A) the currently active channel is reconfigured; (B) Currently active channel is deconfigured and disabled, another channel is chosen as active one and configured. Case (B) won't happen if hardware arbitration has been enabled, the channel that was in active state is suspended simply. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:20 +08:00
/* Check if it is AEN packet */
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
hdr = (struct ncsi_pkt_hdr *)skb_network_header(skb);
net/ncsi: NCSI AEN packet handler This introduces NCSI AEN packet handlers that result in (A) the currently active channel is reconfigured; (B) Currently active channel is deconfigured and disabled, another channel is chosen as active one and configured. Case (B) won't happen if hardware arbitration has been enabled, the channel that was in active state is suspended simply. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:20 +08:00
if (hdr->type == NCSI_PKT_AEN)
return ncsi_aen_handler(ndp, skb);
/* Find the handler */
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
for (i = 0; i < ARRAY_SIZE(ncsi_rsp_handlers); i++) {
if (ncsi_rsp_handlers[i].type == hdr->type) {
if (ncsi_rsp_handlers[i].handler)
nrh = &ncsi_rsp_handlers[i];
else
nrh = NULL;
break;
}
}
if (!nrh) {
netdev_err(nd->dev, "Received unrecognized packet (0x%x)\n",
hdr->type);
return -ENOENT;
}
/* Associate with the request */
spin_lock_irqsave(&ndp->lock, flags);
nr = &ndp->requests[hdr->id];
if (!nr->used) {
spin_unlock_irqrestore(&ndp->lock, flags);
return -ENODEV;
}
nr->rsp = skb;
if (!nr->enabled) {
spin_unlock_irqrestore(&ndp->lock, flags);
ret = -ENOENT;
goto out;
}
/* Validate the packet */
spin_unlock_irqrestore(&ndp->lock, flags);
payload = nrh->payload;
if (payload < 0)
payload = ntohs(hdr->length);
ret = ncsi_validate_rsp_pkt(nr, payload);
net/ncsi: Improve general state logging The NCSI driver is mostly silent which becomes a headache when trying to determine what has occurred on the NCSI connection. This adds additional logging in a few key areas such as state transitions and calling out certain errors more visibly. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08 13:30:44 +08:00
if (ret) {
netdev_warn(ndp->ndev.dev,
"NCSI: 'bad' packet ignored for type 0x%x\n",
hdr->type);
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
goto out;
net/ncsi: Improve general state logging The NCSI driver is mostly silent which becomes a headache when trying to determine what has occurred on the NCSI connection. This adds additional logging in a few key areas such as state transitions and calling out certain errors more visibly. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08 13:30:44 +08:00
}
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
/* Process the packet */
ret = nrh->handler(nr);
net/ncsi: Improve general state logging The NCSI driver is mostly silent which becomes a headache when trying to determine what has occurred on the NCSI connection. This adds additional logging in a few key areas such as state transitions and calling out certain errors more visibly. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08 13:30:44 +08:00
if (ret)
netdev_err(ndp->ndev.dev,
"NCSI: Handler for packet type 0x%x returned %d\n",
hdr->type, ret);
net/ncsi: NCSI response packet handler The NCSI response packets are sent to MC (Management Controller) from the remote end. They are responses of NCSI command packets for multiple purposes: completion status of NCSI command packets, return NCSI channel's capability or configuration etc. This defines struct to represent NCSI response packets and introduces function ncsi_rcv_rsp() which will be used to receive NCSI response packets and parse them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 09:54:18 +08:00
out:
ncsi_free_request(nr);
return ret;
}