License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2016-11-27 09:32:46 +08:00
|
|
|
/*
|
|
|
|
* fscrypt_private.h
|
|
|
|
*
|
|
|
|
* Copyright (C) 2015, Google, Inc.
|
|
|
|
*
|
2019-08-05 10:35:45 +08:00
|
|
|
* Originally written by Michael Halcrow, Ildar Muslukhov, and Uday Savagaonkar.
|
|
|
|
* Heavily modified since then.
|
2016-11-27 09:32:46 +08:00
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef _FSCRYPT_PRIVATE_H
|
|
|
|
#define _FSCRYPT_PRIVATE_H
|
|
|
|
|
2017-10-10 03:15:34 +08:00
|
|
|
#include <linux/fscrypt.h>
|
2017-06-19 15:27:58 +08:00
|
|
|
#include <crypto/hash.h>
|
2016-11-27 09:32:46 +08:00
|
|
|
|
fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl
Add a new fscrypt ioctl, FS_IOC_ADD_ENCRYPTION_KEY. This ioctl adds an
encryption key to the filesystem's fscrypt keyring ->s_master_keys,
making any files encrypted with that key appear "unlocked".
Why we need this
~~~~~~~~~~~~~~~~
The main problem is that the "locked/unlocked" (ciphertext/plaintext)
status of encrypted files is global, but the fscrypt keys are not.
fscrypt only looks for keys in the keyring(s) the process accessing the
filesystem is subscribed to: the thread keyring, process keyring, and
session keyring, where the session keyring may contain the user keyring.
Therefore, userspace has to put fscrypt keys in the keyrings for
individual users or sessions. But this means that when a process with a
different keyring tries to access encrypted files, whether they appear
"unlocked" or not is nondeterministic. This is because it depends on
whether the files are currently present in the inode cache.
Fixing this by consistently providing each process its own view of the
filesystem depending on whether it has the key or not isn't feasible due
to how the VFS caches work. Furthermore, while sometimes users expect
this behavior, it is misguided for two reasons. First, it would be an
OS-level access control mechanism largely redundant with existing access
control mechanisms such as UNIX file permissions, ACLs, LSMs, etc.
Encryption is actually for protecting the data at rest.
Second, almost all users of fscrypt actually do need the keys to be
global. The largest users of fscrypt, Android and Chromium OS, achieve
this by having PID 1 create a "session keyring" that is inherited by
every process. This works, but it isn't scalable because it prevents
session keyrings from being used for any other purpose.
On general-purpose Linux distros, the 'fscrypt' userspace tool [1] can't
similarly abuse the session keyring, so to make 'sudo' work on all
systems it has to link all the user keyrings into root's user keyring
[2]. This is ugly and raises security concerns. Moreover it can't make
the keys available to system services, such as sshd trying to access the
user's '~/.ssh' directory (see [3], [4]) or NetworkManager trying to
read certificates from the user's home directory (see [5]); or to Docker
containers (see [6], [7]).
By having an API to add a key to the *filesystem* we'll be able to fix
the above bugs, remove userspace workarounds, and clearly express the
intended semantics: the locked/unlocked status of an encrypted directory
is global, and encryption is orthogonal to OS-level access control.
Why not use the add_key() syscall
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We use an ioctl for this API rather than the existing add_key() system
call because the ioctl gives us the flexibility needed to implement
fscrypt-specific semantics that will be introduced in later patches:
- Supporting key removal with the semantics such that the secret is
removed immediately and any unused inodes using the key are evicted;
also, the eviction of any in-use inodes can be retried.
- Calculating a key-dependent cryptographic identifier and returning it
to userspace.
- Allowing keys to be added and removed by non-root users, but only keys
for v2 encryption policies; and to prevent denial-of-service attacks,
users can only remove keys they themselves have added, and a key is
only really removed after all users who added it have removed it.
Trying to shoehorn these semantics into the keyrings syscalls would be
very difficult, whereas the ioctls make things much easier.
However, to reuse code the implementation still uses the keyrings
service internally. Thus we get lockless RCU-mode key lookups without
having to re-implement it, and the keys automatically show up in
/proc/keys for debugging purposes.
References:
[1] https://github.com/google/fscrypt
[2] https://goo.gl/55cCrI#heading=h.vf09isp98isb
[3] https://github.com/google/fscrypt/issues/111#issuecomment-444347939
[4] https://github.com/google/fscrypt/issues/116
[5] https://bugs.launchpad.net/ubuntu/+source/fscrypt/+bug/1770715
[6] https://github.com/google/fscrypt/issues/128
[7] https://askubuntu.com/questions/1130306/cannot-run-docker-on-an-encrypted-filesystem
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-05 10:35:46 +08:00
|
|
|
#define CONST_STRLEN(str) (sizeof(str) - 1)
|
|
|
|
|
2018-05-01 06:51:46 +08:00
|
|
|
#define FS_KEY_DERIVATION_NONCE_SIZE 16
|
2016-11-27 11:05:18 +08:00
|
|
|
|
fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl
Add a new fscrypt ioctl, FS_IOC_ADD_ENCRYPTION_KEY. This ioctl adds an
encryption key to the filesystem's fscrypt keyring ->s_master_keys,
making any files encrypted with that key appear "unlocked".
Why we need this
~~~~~~~~~~~~~~~~
The main problem is that the "locked/unlocked" (ciphertext/plaintext)
status of encrypted files is global, but the fscrypt keys are not.
fscrypt only looks for keys in the keyring(s) the process accessing the
filesystem is subscribed to: the thread keyring, process keyring, and
session keyring, where the session keyring may contain the user keyring.
Therefore, userspace has to put fscrypt keys in the keyrings for
individual users or sessions. But this means that when a process with a
different keyring tries to access encrypted files, whether they appear
"unlocked" or not is nondeterministic. This is because it depends on
whether the files are currently present in the inode cache.
Fixing this by consistently providing each process its own view of the
filesystem depending on whether it has the key or not isn't feasible due
to how the VFS caches work. Furthermore, while sometimes users expect
this behavior, it is misguided for two reasons. First, it would be an
OS-level access control mechanism largely redundant with existing access
control mechanisms such as UNIX file permissions, ACLs, LSMs, etc.
Encryption is actually for protecting the data at rest.
Second, almost all users of fscrypt actually do need the keys to be
global. The largest users of fscrypt, Android and Chromium OS, achieve
this by having PID 1 create a "session keyring" that is inherited by
every process. This works, but it isn't scalable because it prevents
session keyrings from being used for any other purpose.
On general-purpose Linux distros, the 'fscrypt' userspace tool [1] can't
similarly abuse the session keyring, so to make 'sudo' work on all
systems it has to link all the user keyrings into root's user keyring
[2]. This is ugly and raises security concerns. Moreover it can't make
the keys available to system services, such as sshd trying to access the
user's '~/.ssh' directory (see [3], [4]) or NetworkManager trying to
read certificates from the user's home directory (see [5]); or to Docker
containers (see [6], [7]).
By having an API to add a key to the *filesystem* we'll be able to fix
the above bugs, remove userspace workarounds, and clearly express the
intended semantics: the locked/unlocked status of an encrypted directory
is global, and encryption is orthogonal to OS-level access control.
Why not use the add_key() syscall
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We use an ioctl for this API rather than the existing add_key() system
call because the ioctl gives us the flexibility needed to implement
fscrypt-specific semantics that will be introduced in later patches:
- Supporting key removal with the semantics such that the secret is
removed immediately and any unused inodes using the key are evicted;
also, the eviction of any in-use inodes can be retried.
- Calculating a key-dependent cryptographic identifier and returning it
to userspace.
- Allowing keys to be added and removed by non-root users, but only keys
for v2 encryption policies; and to prevent denial-of-service attacks,
users can only remove keys they themselves have added, and a key is
only really removed after all users who added it have removed it.
Trying to shoehorn these semantics into the keyrings syscalls would be
very difficult, whereas the ioctls make things much easier.
However, to reuse code the implementation still uses the keyrings
service internally. Thus we get lockless RCU-mode key lookups without
having to re-implement it, and the keys automatically show up in
/proc/keys for debugging purposes.
References:
[1] https://github.com/google/fscrypt
[2] https://goo.gl/55cCrI#heading=h.vf09isp98isb
[3] https://github.com/google/fscrypt/issues/111#issuecomment-444347939
[4] https://github.com/google/fscrypt/issues/116
[5] https://bugs.launchpad.net/ubuntu/+source/fscrypt/+bug/1770715
[6] https://github.com/google/fscrypt/issues/128
[7] https://askubuntu.com/questions/1130306/cannot-run-docker-on-an-encrypted-filesystem
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-05 10:35:46 +08:00
|
|
|
#define FSCRYPT_MIN_KEY_SIZE 16
|
|
|
|
|
2016-11-27 11:05:18 +08:00
|
|
|
/**
|
|
|
|
* Encryption context for inode
|
|
|
|
*
|
|
|
|
* Protector format:
|
|
|
|
* 1 byte: Protector format (1 = this version)
|
|
|
|
* 1 byte: File contents encryption mode
|
|
|
|
* 1 byte: File names encryption mode
|
|
|
|
* 1 byte: Flags
|
|
|
|
* 8 bytes: Master Key descriptor
|
|
|
|
* 16 bytes: Encryption Key derivation nonce
|
|
|
|
*/
|
|
|
|
struct fscrypt_context {
|
|
|
|
u8 format;
|
|
|
|
u8 contents_encryption_mode;
|
|
|
|
u8 filenames_encryption_mode;
|
|
|
|
u8 flags;
|
2019-08-05 10:35:44 +08:00
|
|
|
u8 master_key_descriptor[FSCRYPT_KEY_DESCRIPTOR_SIZE];
|
2016-11-27 11:05:18 +08:00
|
|
|
u8 nonce[FS_KEY_DERIVATION_NONCE_SIZE];
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
#define FS_ENCRYPTION_CONTEXT_FORMAT_V1 1
|
|
|
|
|
2018-01-12 12:30:08 +08:00
|
|
|
/**
|
|
|
|
* For encrypted symlinks, the ciphertext length is stored at the beginning
|
|
|
|
* of the string in little-endian format.
|
|
|
|
*/
|
|
|
|
struct fscrypt_symlink_data {
|
|
|
|
__le16 len;
|
|
|
|
char encrypted_path[1];
|
|
|
|
} __packed;
|
|
|
|
|
2016-11-27 11:05:18 +08:00
|
|
|
/*
|
fscrypt: add Adiantum support
Add support for the Adiantum encryption mode to fscrypt. Adiantum is a
tweakable, length-preserving encryption mode with security provably
reducible to that of XChaCha12 and AES-256, subject to a security bound.
It's also a true wide-block mode, unlike XTS. See the paper
"Adiantum: length-preserving encryption for entry-level processors"
(https://eprint.iacr.org/2018/720.pdf) for more details. Also see
commit 059c2a4d8e16 ("crypto: adiantum - add Adiantum support").
On sufficiently long messages, Adiantum's bottlenecks are XChaCha12 and
the NH hash function. These algorithms are fast even on processors
without dedicated crypto instructions. Adiantum makes it feasible to
enable storage encryption on low-end mobile devices that lack AES
instructions; currently such devices are unencrypted. On ARM Cortex-A7,
on 4096-byte messages Adiantum encryption is about 4 times faster than
AES-256-XTS encryption; decryption is about 5 times faster.
In fscrypt, Adiantum is suitable for encrypting both file contents and
names. With filenames, it fixes a known weakness: when two filenames in
a directory share a common prefix of >= 16 bytes, with CTS-CBC their
encrypted filenames share a common prefix too, leaking information.
Adiantum does not have this problem.
Since Adiantum also accepts long tweaks (IVs), it's also safe to use the
master key directly for Adiantum encryption rather than deriving
per-file keys, provided that the per-file nonce is included in the IVs
and the master key isn't used for any other encryption mode. This
configuration saves memory and improves performance. A new fscrypt
policy flag is added to allow users to opt-in to this configuration.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-01-06 21:36:21 +08:00
|
|
|
* fscrypt_info - the "encryption key" for an inode
|
|
|
|
*
|
|
|
|
* When an encrypted file's key is made available, an instance of this struct is
|
|
|
|
* allocated and stored in ->i_crypt_info. Once created, it remains until the
|
|
|
|
* inode is evicted.
|
2016-11-27 11:05:18 +08:00
|
|
|
*/
|
|
|
|
struct fscrypt_info {
|
fscrypt: add Adiantum support
Add support for the Adiantum encryption mode to fscrypt. Adiantum is a
tweakable, length-preserving encryption mode with security provably
reducible to that of XChaCha12 and AES-256, subject to a security bound.
It's also a true wide-block mode, unlike XTS. See the paper
"Adiantum: length-preserving encryption for entry-level processors"
(https://eprint.iacr.org/2018/720.pdf) for more details. Also see
commit 059c2a4d8e16 ("crypto: adiantum - add Adiantum support").
On sufficiently long messages, Adiantum's bottlenecks are XChaCha12 and
the NH hash function. These algorithms are fast even on processors
without dedicated crypto instructions. Adiantum makes it feasible to
enable storage encryption on low-end mobile devices that lack AES
instructions; currently such devices are unencrypted. On ARM Cortex-A7,
on 4096-byte messages Adiantum encryption is about 4 times faster than
AES-256-XTS encryption; decryption is about 5 times faster.
In fscrypt, Adiantum is suitable for encrypting both file contents and
names. With filenames, it fixes a known weakness: when two filenames in
a directory share a common prefix of >= 16 bytes, with CTS-CBC their
encrypted filenames share a common prefix too, leaking information.
Adiantum does not have this problem.
Since Adiantum also accepts long tweaks (IVs), it's also safe to use the
master key directly for Adiantum encryption rather than deriving
per-file keys, provided that the per-file nonce is included in the IVs
and the master key isn't used for any other encryption mode. This
configuration saves memory and improves performance. A new fscrypt
policy flag is added to allow users to opt-in to this configuration.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-01-06 21:36:21 +08:00
|
|
|
|
|
|
|
/* The actual crypto transform used for encryption and decryption */
|
|
|
|
struct crypto_skcipher *ci_ctfm;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Cipher for ESSIV IV generation. Only set for CBC contents
|
|
|
|
* encryption, otherwise is NULL.
|
|
|
|
*/
|
|
|
|
struct crypto_cipher *ci_essiv_tfm;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Encryption mode used for this inode. It corresponds to either
|
|
|
|
* ci_data_mode or ci_filename_mode, depending on the inode type.
|
|
|
|
*/
|
|
|
|
struct fscrypt_mode *ci_mode;
|
|
|
|
|
2019-08-05 10:35:44 +08:00
|
|
|
/* Back-pointer to the inode */
|
|
|
|
struct inode *ci_inode;
|
|
|
|
|
fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctl
Add a new fscrypt ioctl, FS_IOC_REMOVE_ENCRYPTION_KEY. This ioctl
removes an encryption key that was added by FS_IOC_ADD_ENCRYPTION_KEY.
It wipes the secret key itself, then "locks" the encrypted files and
directories that had been unlocked using that key -- implemented by
evicting the relevant dentries and inodes from the VFS caches.
The problem this solves is that many fscrypt users want the ability to
remove encryption keys, causing the corresponding encrypted directories
to appear "locked" (presented in ciphertext form) again. Moreover,
users want removing an encryption key to *really* remove it, in the
sense that the removed keys cannot be recovered even if kernel memory is
compromised, e.g. by the exploit of a kernel security vulnerability or
by a physical attack. This is desirable after a user logs out of the
system, for example. In many cases users even already assume this to be
the case and are surprised to hear when it's not.
It is not sufficient to simply unlink the master key from the keyring
(or to revoke or invalidate it), since the actual encryption transform
objects are still pinned in memory by their inodes. Therefore, to
really remove a key we must also evict the relevant inodes.
Currently one workaround is to run 'sync && echo 2 >
/proc/sys/vm/drop_caches'. But, that evicts all unused inodes in the
system rather than just the inodes associated with the key being
removed, causing severe performance problems. Moreover, it requires
root privileges, so regular users can't "lock" their encrypted files.
Another workaround, used in Chromium OS kernels, is to add a new
VFS-level ioctl FS_IOC_DROP_CACHE which is a more restricted version of
drop_caches that operates on a single super_block. It does:
shrink_dcache_sb(sb);
invalidate_inodes(sb, false);
But it's still a hack. Yet, the major users of filesystem encryption
want this feature badly enough that they are actually using these hacks.
To properly solve the problem, start maintaining a list of the inodes
which have been "unlocked" using each master key. Originally this
wasn't possible because the kernel didn't keep track of in-use master
keys at all. But, with the ->s_master_keys keyring it is now possible.
Then, add an ioctl FS_IOC_REMOVE_ENCRYPTION_KEY. It finds the specified
master key in ->s_master_keys, then wipes the secret key itself, which
prevents any additional inodes from being unlocked with the key. Then,
it syncs the filesystem and evicts the inodes in the key's list. The
normal inode eviction code will free and wipe the per-file keys (in
->i_crypt_info). Note that freeing ->i_crypt_info without evicting the
inodes was also considered, but would have been racy.
Some inodes may still be in use when a master key is removed, and we
can't simply revoke random file descriptors, mmap's, etc. Thus, the
ioctl simply skips in-use inodes, and returns -EBUSY to indicate that
some inodes weren't evicted. The master key *secret* is still removed,
but the fscrypt_master_key struct remains to keep track of the remaining
inodes. Userspace can then retry the ioctl to evict the remaining
inodes. Alternatively, if userspace adds the key again, the refreshed
secret will be associated with the existing list of inodes so they
remain correctly tracked for future key removals.
The ioctl doesn't wipe pagecache pages. Thus, we tolerate that after a
kernel compromise some portions of plaintext file contents may still be
recoverable from memory. This can be solved by enabling page poisoning
system-wide, which security conscious users may choose to do. But it's
very difficult to solve otherwise, e.g. note that plaintext file
contents may have been read in other places than pagecache pages.
Like FS_IOC_ADD_ENCRYPTION_KEY, FS_IOC_REMOVE_ENCRYPTION_KEY is
initially restricted to privileged users only. This is sufficient for
some use cases, but not all. A later patch will relax this restriction,
but it will require introducing key hashes, among other changes.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-05 10:35:46 +08:00
|
|
|
/*
|
|
|
|
* The master key with which this inode was unlocked (decrypted). This
|
|
|
|
* will be NULL if the master key was found in a process-subscribed
|
|
|
|
* keyring rather than in the filesystem-level keyring.
|
|
|
|
*/
|
|
|
|
struct key *ci_master_key;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Link in list of inodes that were unlocked with the master key.
|
|
|
|
* Only used when ->ci_master_key is set.
|
|
|
|
*/
|
|
|
|
struct list_head ci_master_key_link;
|
|
|
|
|
fscrypt: add Adiantum support
Add support for the Adiantum encryption mode to fscrypt. Adiantum is a
tweakable, length-preserving encryption mode with security provably
reducible to that of XChaCha12 and AES-256, subject to a security bound.
It's also a true wide-block mode, unlike XTS. See the paper
"Adiantum: length-preserving encryption for entry-level processors"
(https://eprint.iacr.org/2018/720.pdf) for more details. Also see
commit 059c2a4d8e16 ("crypto: adiantum - add Adiantum support").
On sufficiently long messages, Adiantum's bottlenecks are XChaCha12 and
the NH hash function. These algorithms are fast even on processors
without dedicated crypto instructions. Adiantum makes it feasible to
enable storage encryption on low-end mobile devices that lack AES
instructions; currently such devices are unencrypted. On ARM Cortex-A7,
on 4096-byte messages Adiantum encryption is about 4 times faster than
AES-256-XTS encryption; decryption is about 5 times faster.
In fscrypt, Adiantum is suitable for encrypting both file contents and
names. With filenames, it fixes a known weakness: when two filenames in
a directory share a common prefix of >= 16 bytes, with CTS-CBC their
encrypted filenames share a common prefix too, leaking information.
Adiantum does not have this problem.
Since Adiantum also accepts long tweaks (IVs), it's also safe to use the
master key directly for Adiantum encryption rather than deriving
per-file keys, provided that the per-file nonce is included in the IVs
and the master key isn't used for any other encryption mode. This
configuration saves memory and improves performance. A new fscrypt
policy flag is added to allow users to opt-in to this configuration.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-01-06 21:36:21 +08:00
|
|
|
/*
|
2019-08-05 10:35:45 +08:00
|
|
|
* If non-NULL, then encryption is done using the master key directly
|
|
|
|
* and ci_ctfm will equal ci_direct_key->dk_ctfm.
|
fscrypt: add Adiantum support
Add support for the Adiantum encryption mode to fscrypt. Adiantum is a
tweakable, length-preserving encryption mode with security provably
reducible to that of XChaCha12 and AES-256, subject to a security bound.
It's also a true wide-block mode, unlike XTS. See the paper
"Adiantum: length-preserving encryption for entry-level processors"
(https://eprint.iacr.org/2018/720.pdf) for more details. Also see
commit 059c2a4d8e16 ("crypto: adiantum - add Adiantum support").
On sufficiently long messages, Adiantum's bottlenecks are XChaCha12 and
the NH hash function. These algorithms are fast even on processors
without dedicated crypto instructions. Adiantum makes it feasible to
enable storage encryption on low-end mobile devices that lack AES
instructions; currently such devices are unencrypted. On ARM Cortex-A7,
on 4096-byte messages Adiantum encryption is about 4 times faster than
AES-256-XTS encryption; decryption is about 5 times faster.
In fscrypt, Adiantum is suitable for encrypting both file contents and
names. With filenames, it fixes a known weakness: when two filenames in
a directory share a common prefix of >= 16 bytes, with CTS-CBC their
encrypted filenames share a common prefix too, leaking information.
Adiantum does not have this problem.
Since Adiantum also accepts long tweaks (IVs), it's also safe to use the
master key directly for Adiantum encryption rather than deriving
per-file keys, provided that the per-file nonce is included in the IVs
and the master key isn't used for any other encryption mode. This
configuration saves memory and improves performance. A new fscrypt
policy flag is added to allow users to opt-in to this configuration.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-01-06 21:36:21 +08:00
|
|
|
*/
|
2019-08-05 10:35:45 +08:00
|
|
|
struct fscrypt_direct_key *ci_direct_key;
|
fscrypt: add Adiantum support
Add support for the Adiantum encryption mode to fscrypt. Adiantum is a
tweakable, length-preserving encryption mode with security provably
reducible to that of XChaCha12 and AES-256, subject to a security bound.
It's also a true wide-block mode, unlike XTS. See the paper
"Adiantum: length-preserving encryption for entry-level processors"
(https://eprint.iacr.org/2018/720.pdf) for more details. Also see
commit 059c2a4d8e16 ("crypto: adiantum - add Adiantum support").
On sufficiently long messages, Adiantum's bottlenecks are XChaCha12 and
the NH hash function. These algorithms are fast even on processors
without dedicated crypto instructions. Adiantum makes it feasible to
enable storage encryption on low-end mobile devices that lack AES
instructions; currently such devices are unencrypted. On ARM Cortex-A7,
on 4096-byte messages Adiantum encryption is about 4 times faster than
AES-256-XTS encryption; decryption is about 5 times faster.
In fscrypt, Adiantum is suitable for encrypting both file contents and
names. With filenames, it fixes a known weakness: when two filenames in
a directory share a common prefix of >= 16 bytes, with CTS-CBC their
encrypted filenames share a common prefix too, leaking information.
Adiantum does not have this problem.
Since Adiantum also accepts long tweaks (IVs), it's also safe to use the
master key directly for Adiantum encryption rather than deriving
per-file keys, provided that the per-file nonce is included in the IVs
and the master key isn't used for any other encryption mode. This
configuration saves memory and improves performance. A new fscrypt
policy flag is added to allow users to opt-in to this configuration.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-01-06 21:36:21 +08:00
|
|
|
|
|
|
|
/* fields from the fscrypt_context */
|
2016-11-27 11:05:18 +08:00
|
|
|
u8 ci_data_mode;
|
|
|
|
u8 ci_filename_mode;
|
|
|
|
u8 ci_flags;
|
2019-08-05 10:35:44 +08:00
|
|
|
u8 ci_master_key_descriptor[FSCRYPT_KEY_DESCRIPTOR_SIZE];
|
fscrypt: add Adiantum support
Add support for the Adiantum encryption mode to fscrypt. Adiantum is a
tweakable, length-preserving encryption mode with security provably
reducible to that of XChaCha12 and AES-256, subject to a security bound.
It's also a true wide-block mode, unlike XTS. See the paper
"Adiantum: length-preserving encryption for entry-level processors"
(https://eprint.iacr.org/2018/720.pdf) for more details. Also see
commit 059c2a4d8e16 ("crypto: adiantum - add Adiantum support").
On sufficiently long messages, Adiantum's bottlenecks are XChaCha12 and
the NH hash function. These algorithms are fast even on processors
without dedicated crypto instructions. Adiantum makes it feasible to
enable storage encryption on low-end mobile devices that lack AES
instructions; currently such devices are unencrypted. On ARM Cortex-A7,
on 4096-byte messages Adiantum encryption is about 4 times faster than
AES-256-XTS encryption; decryption is about 5 times faster.
In fscrypt, Adiantum is suitable for encrypting both file contents and
names. With filenames, it fixes a known weakness: when two filenames in
a directory share a common prefix of >= 16 bytes, with CTS-CBC their
encrypted filenames share a common prefix too, leaking information.
Adiantum does not have this problem.
Since Adiantum also accepts long tweaks (IVs), it's also safe to use the
master key directly for Adiantum encryption rather than deriving
per-file keys, provided that the per-file nonce is included in the IVs
and the master key isn't used for any other encryption mode. This
configuration saves memory and improves performance. A new fscrypt
policy flag is added to allow users to opt-in to this configuration.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-01-06 21:36:21 +08:00
|
|
|
u8 ci_nonce[FS_KEY_DERIVATION_NONCE_SIZE];
|
2016-11-27 11:05:18 +08:00
|
|
|
};
|
|
|
|
|
2016-12-19 19:25:32 +08:00
|
|
|
typedef enum {
|
|
|
|
FS_DECRYPT = 0,
|
|
|
|
FS_ENCRYPT,
|
|
|
|
} fscrypt_direction_t;
|
|
|
|
|
2016-11-27 11:05:18 +08:00
|
|
|
#define FS_CTX_REQUIRES_FREE_ENCRYPT_FL 0x00000001
|
|
|
|
|
2018-01-06 02:44:58 +08:00
|
|
|
static inline bool fscrypt_valid_enc_modes(u32 contents_mode,
|
|
|
|
u32 filenames_mode)
|
|
|
|
{
|
2019-08-05 10:35:44 +08:00
|
|
|
if (contents_mode == FSCRYPT_MODE_AES_128_CBC &&
|
|
|
|
filenames_mode == FSCRYPT_MODE_AES_128_CTS)
|
2018-01-06 02:44:58 +08:00
|
|
|
return true;
|
|
|
|
|
2019-08-05 10:35:44 +08:00
|
|
|
if (contents_mode == FSCRYPT_MODE_AES_256_XTS &&
|
|
|
|
filenames_mode == FSCRYPT_MODE_AES_256_CTS)
|
2018-01-06 02:44:58 +08:00
|
|
|
return true;
|
|
|
|
|
2019-08-05 10:35:44 +08:00
|
|
|
if (contents_mode == FSCRYPT_MODE_ADIANTUM &&
|
|
|
|
filenames_mode == FSCRYPT_MODE_ADIANTUM)
|
fscrypt: add Adiantum support
Add support for the Adiantum encryption mode to fscrypt. Adiantum is a
tweakable, length-preserving encryption mode with security provably
reducible to that of XChaCha12 and AES-256, subject to a security bound.
It's also a true wide-block mode, unlike XTS. See the paper
"Adiantum: length-preserving encryption for entry-level processors"
(https://eprint.iacr.org/2018/720.pdf) for more details. Also see
commit 059c2a4d8e16 ("crypto: adiantum - add Adiantum support").
On sufficiently long messages, Adiantum's bottlenecks are XChaCha12 and
the NH hash function. These algorithms are fast even on processors
without dedicated crypto instructions. Adiantum makes it feasible to
enable storage encryption on low-end mobile devices that lack AES
instructions; currently such devices are unencrypted. On ARM Cortex-A7,
on 4096-byte messages Adiantum encryption is about 4 times faster than
AES-256-XTS encryption; decryption is about 5 times faster.
In fscrypt, Adiantum is suitable for encrypting both file contents and
names. With filenames, it fixes a known weakness: when two filenames in
a directory share a common prefix of >= 16 bytes, with CTS-CBC their
encrypted filenames share a common prefix too, leaking information.
Adiantum does not have this problem.
Since Adiantum also accepts long tweaks (IVs), it's also safe to use the
master key directly for Adiantum encryption rather than deriving
per-file keys, provided that the per-file nonce is included in the IVs
and the master key isn't used for any other encryption mode. This
configuration saves memory and improves performance. A new fscrypt
policy flag is added to allow users to opt-in to this configuration.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-01-06 21:36:21 +08:00
|
|
|
return true;
|
|
|
|
|
2018-01-06 02:44:58 +08:00
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2016-11-27 09:43:09 +08:00
|
|
|
/* crypto.c */
|
2018-01-06 02:44:54 +08:00
|
|
|
extern struct kmem_cache *fscrypt_info_cachep;
|
2016-12-19 19:25:32 +08:00
|
|
|
extern int fscrypt_initialize(unsigned int cop_flags);
|
2019-05-21 00:29:41 +08:00
|
|
|
extern int fscrypt_crypt_block(const struct inode *inode,
|
|
|
|
fscrypt_direction_t rw, u64 lblk_num,
|
|
|
|
struct page *src_page, struct page *dest_page,
|
|
|
|
unsigned int len, unsigned int offs,
|
|
|
|
gfp_t gfp_flags);
|
2019-05-21 00:29:39 +08:00
|
|
|
extern struct page *fscrypt_alloc_bounce_page(gfp_t gfp_flags);
|
2018-05-01 06:51:36 +08:00
|
|
|
extern const struct dentry_operations fscrypt_d_ops;
|
2016-11-27 09:43:09 +08:00
|
|
|
|
2018-05-01 06:51:47 +08:00
|
|
|
extern void __printf(3, 4) __cold
|
2019-07-25 02:07:58 +08:00
|
|
|
fscrypt_msg(const struct inode *inode, const char *level, const char *fmt, ...);
|
2018-05-01 06:51:47 +08:00
|
|
|
|
2019-07-25 02:07:58 +08:00
|
|
|
#define fscrypt_warn(inode, fmt, ...) \
|
|
|
|
fscrypt_msg((inode), KERN_WARNING, fmt, ##__VA_ARGS__)
|
|
|
|
#define fscrypt_err(inode, fmt, ...) \
|
|
|
|
fscrypt_msg((inode), KERN_ERR, fmt, ##__VA_ARGS__)
|
2018-05-01 06:51:47 +08:00
|
|
|
|
fscrypt: add Adiantum support
Add support for the Adiantum encryption mode to fscrypt. Adiantum is a
tweakable, length-preserving encryption mode with security provably
reducible to that of XChaCha12 and AES-256, subject to a security bound.
It's also a true wide-block mode, unlike XTS. See the paper
"Adiantum: length-preserving encryption for entry-level processors"
(https://eprint.iacr.org/2018/720.pdf) for more details. Also see
commit 059c2a4d8e16 ("crypto: adiantum - add Adiantum support").
On sufficiently long messages, Adiantum's bottlenecks are XChaCha12 and
the NH hash function. These algorithms are fast even on processors
without dedicated crypto instructions. Adiantum makes it feasible to
enable storage encryption on low-end mobile devices that lack AES
instructions; currently such devices are unencrypted. On ARM Cortex-A7,
on 4096-byte messages Adiantum encryption is about 4 times faster than
AES-256-XTS encryption; decryption is about 5 times faster.
In fscrypt, Adiantum is suitable for encrypting both file contents and
names. With filenames, it fixes a known weakness: when two filenames in
a directory share a common prefix of >= 16 bytes, with CTS-CBC their
encrypted filenames share a common prefix too, leaking information.
Adiantum does not have this problem.
Since Adiantum also accepts long tweaks (IVs), it's also safe to use the
master key directly for Adiantum encryption rather than deriving
per-file keys, provided that the per-file nonce is included in the IVs
and the master key isn't used for any other encryption mode. This
configuration saves memory and improves performance. A new fscrypt
policy flag is added to allow users to opt-in to this configuration.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-01-06 21:36:21 +08:00
|
|
|
#define FSCRYPT_MAX_IV_SIZE 32
|
|
|
|
|
|
|
|
union fscrypt_iv {
|
|
|
|
struct {
|
|
|
|
/* logical block number within the file */
|
|
|
|
__le64 lblk_num;
|
|
|
|
|
|
|
|
/* per-file nonce; only set in DIRECT_KEY mode */
|
|
|
|
u8 nonce[FS_KEY_DERIVATION_NONCE_SIZE];
|
|
|
|
};
|
|
|
|
u8 raw[FSCRYPT_MAX_IV_SIZE];
|
|
|
|
};
|
|
|
|
|
|
|
|
void fscrypt_generate_iv(union fscrypt_iv *iv, u64 lblk_num,
|
|
|
|
const struct fscrypt_info *ci);
|
|
|
|
|
fscrypt: new helper functions for ->symlink()
Currently, filesystems supporting fscrypt need to implement some tricky
logic when creating encrypted symlinks, including handling a peculiar
on-disk format (struct fscrypt_symlink_data) and correctly calculating
the size of the encrypted symlink. Introduce helper functions to make
things a bit easier:
- fscrypt_prepare_symlink() computes and validates the size the symlink
target will require on-disk.
- fscrypt_encrypt_symlink() creates the encrypted target if needed.
The new helpers actually fix some subtle bugs. First, when checking
whether the symlink target was too long, filesystems didn't account for
the fact that the NUL padding is meant to be truncated if it would cause
the maximum length to be exceeded, as is done for filenames in
directories. Consequently users would receive ENAMETOOLONG when
creating symlinks close to what is supposed to be the maximum length.
For example, with EXT4 with a 4K block size, the maximum symlink target
length in an encrypted directory is supposed to be 4093 bytes (in
comparison to 4095 in an unencrypted directory), but in
FS_POLICY_FLAGS_PAD_32-mode only up to 4064 bytes were accepted.
Second, symlink targets of "." and ".." were not being encrypted, even
though they should be, as these names are special in *directory entries*
but not in symlink targets. Fortunately, we can fix this simply by
starting to encrypt them, as old kernels already accept them in
encrypted form.
Third, the output string length the filesystems were providing when
doing the actual encryption was incorrect, as it was forgotten to
exclude 'sizeof(struct fscrypt_symlink_data)'. Fortunately though, this
bug didn't make a difference.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-06 02:45:01 +08:00
|
|
|
/* fname.c */
|
2018-01-12 12:30:08 +08:00
|
|
|
extern int fname_encrypt(struct inode *inode, const struct qstr *iname,
|
|
|
|
u8 *out, unsigned int olen);
|
2018-01-12 12:30:08 +08:00
|
|
|
extern bool fscrypt_fname_encrypted_size(const struct inode *inode,
|
|
|
|
u32 orig_len, u32 max_len,
|
|
|
|
u32 *encrypted_len_ret);
|
fscrypt: new helper functions for ->symlink()
Currently, filesystems supporting fscrypt need to implement some tricky
logic when creating encrypted symlinks, including handling a peculiar
on-disk format (struct fscrypt_symlink_data) and correctly calculating
the size of the encrypted symlink. Introduce helper functions to make
things a bit easier:
- fscrypt_prepare_symlink() computes and validates the size the symlink
target will require on-disk.
- fscrypt_encrypt_symlink() creates the encrypted target if needed.
The new helpers actually fix some subtle bugs. First, when checking
whether the symlink target was too long, filesystems didn't account for
the fact that the NUL padding is meant to be truncated if it would cause
the maximum length to be exceeded, as is done for filenames in
directories. Consequently users would receive ENAMETOOLONG when
creating symlinks close to what is supposed to be the maximum length.
For example, with EXT4 with a 4K block size, the maximum symlink target
length in an encrypted directory is supposed to be 4093 bytes (in
comparison to 4095 in an unencrypted directory), but in
FS_POLICY_FLAGS_PAD_32-mode only up to 4064 bytes were accepted.
Second, symlink targets of "." and ".." were not being encrypted, even
though they should be, as these names are special in *directory entries*
but not in symlink targets. Fortunately, we can fix this simply by
starting to encrypt them, as old kernels already accept them in
encrypted form.
Third, the output string length the filesystems were providing when
doing the actual encryption was incorrect, as it was forgotten to
exclude 'sizeof(struct fscrypt_symlink_data)'. Fortunately though, this
bug didn't make a difference.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-06 02:45:01 +08:00
|
|
|
|
fscrypt: add an HKDF-SHA512 implementation
Add an implementation of HKDF (RFC 5869) to fscrypt, for the purpose of
deriving additional key material from the fscrypt master keys for v2
encryption policies. HKDF is a key derivation function built on top of
HMAC. We choose SHA-512 for the underlying unkeyed hash, and use an
"hmac(sha512)" transform allocated from the crypto API.
We'll be using this to replace the AES-ECB based KDF currently used to
derive the per-file encryption keys. While the AES-ECB based KDF is
believed to meet the original security requirements, it is nonstandard
and has problems that don't exist in modern KDFs such as HKDF:
1. It's reversible. Given a derived key and nonce, an attacker can
easily compute the master key. This is okay if the master key and
derived keys are equally hard to compromise, but now we'd like to be
more robust against threats such as a derived key being compromised
through a timing attack, or a derived key for an in-use file being
compromised after the master key has already been removed.
2. It doesn't evenly distribute the entropy from the master key; each 16
input bytes only affects the corresponding 16 output bytes.
3. It isn't easily extensible to deriving other values or keys, such as
a public hash for securely identifying the key, or per-mode keys.
Per-mode keys will be immediately useful for Adiantum encryption, for
which fscrypt currently uses the master key directly, introducing
unnecessary usage constraints. Per-mode keys will also be useful for
hardware inline encryption, which is currently being worked on.
HKDF solves all the above problems.
Reviewed-by: Paul Crowley <paulcrowley@google.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-05 10:35:47 +08:00
|
|
|
/* hkdf.c */
|
|
|
|
|
|
|
|
struct fscrypt_hkdf {
|
|
|
|
struct crypto_shash *hmac_tfm;
|
|
|
|
};
|
|
|
|
|
|
|
|
extern int fscrypt_init_hkdf(struct fscrypt_hkdf *hkdf, const u8 *master_key,
|
|
|
|
unsigned int master_key_size);
|
|
|
|
|
|
|
|
extern int fscrypt_hkdf_expand(struct fscrypt_hkdf *hkdf, u8 context,
|
|
|
|
const u8 *info, unsigned int infolen,
|
|
|
|
u8 *okm, unsigned int okmlen);
|
|
|
|
|
|
|
|
extern void fscrypt_destroy_hkdf(struct fscrypt_hkdf *hkdf);
|
|
|
|
|
fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl
Add a new fscrypt ioctl, FS_IOC_ADD_ENCRYPTION_KEY. This ioctl adds an
encryption key to the filesystem's fscrypt keyring ->s_master_keys,
making any files encrypted with that key appear "unlocked".
Why we need this
~~~~~~~~~~~~~~~~
The main problem is that the "locked/unlocked" (ciphertext/plaintext)
status of encrypted files is global, but the fscrypt keys are not.
fscrypt only looks for keys in the keyring(s) the process accessing the
filesystem is subscribed to: the thread keyring, process keyring, and
session keyring, where the session keyring may contain the user keyring.
Therefore, userspace has to put fscrypt keys in the keyrings for
individual users or sessions. But this means that when a process with a
different keyring tries to access encrypted files, whether they appear
"unlocked" or not is nondeterministic. This is because it depends on
whether the files are currently present in the inode cache.
Fixing this by consistently providing each process its own view of the
filesystem depending on whether it has the key or not isn't feasible due
to how the VFS caches work. Furthermore, while sometimes users expect
this behavior, it is misguided for two reasons. First, it would be an
OS-level access control mechanism largely redundant with existing access
control mechanisms such as UNIX file permissions, ACLs, LSMs, etc.
Encryption is actually for protecting the data at rest.
Second, almost all users of fscrypt actually do need the keys to be
global. The largest users of fscrypt, Android and Chromium OS, achieve
this by having PID 1 create a "session keyring" that is inherited by
every process. This works, but it isn't scalable because it prevents
session keyrings from being used for any other purpose.
On general-purpose Linux distros, the 'fscrypt' userspace tool [1] can't
similarly abuse the session keyring, so to make 'sudo' work on all
systems it has to link all the user keyrings into root's user keyring
[2]. This is ugly and raises security concerns. Moreover it can't make
the keys available to system services, such as sshd trying to access the
user's '~/.ssh' directory (see [3], [4]) or NetworkManager trying to
read certificates from the user's home directory (see [5]); or to Docker
containers (see [6], [7]).
By having an API to add a key to the *filesystem* we'll be able to fix
the above bugs, remove userspace workarounds, and clearly express the
intended semantics: the locked/unlocked status of an encrypted directory
is global, and encryption is orthogonal to OS-level access control.
Why not use the add_key() syscall
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We use an ioctl for this API rather than the existing add_key() system
call because the ioctl gives us the flexibility needed to implement
fscrypt-specific semantics that will be introduced in later patches:
- Supporting key removal with the semantics such that the secret is
removed immediately and any unused inodes using the key are evicted;
also, the eviction of any in-use inodes can be retried.
- Calculating a key-dependent cryptographic identifier and returning it
to userspace.
- Allowing keys to be added and removed by non-root users, but only keys
for v2 encryption policies; and to prevent denial-of-service attacks,
users can only remove keys they themselves have added, and a key is
only really removed after all users who added it have removed it.
Trying to shoehorn these semantics into the keyrings syscalls would be
very difficult, whereas the ioctls make things much easier.
However, to reuse code the implementation still uses the keyrings
service internally. Thus we get lockless RCU-mode key lookups without
having to re-implement it, and the keys automatically show up in
/proc/keys for debugging purposes.
References:
[1] https://github.com/google/fscrypt
[2] https://goo.gl/55cCrI#heading=h.vf09isp98isb
[3] https://github.com/google/fscrypt/issues/111#issuecomment-444347939
[4] https://github.com/google/fscrypt/issues/116
[5] https://bugs.launchpad.net/ubuntu/+source/fscrypt/+bug/1770715
[6] https://github.com/google/fscrypt/issues/128
[7] https://askubuntu.com/questions/1130306/cannot-run-docker-on-an-encrypted-filesystem
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-05 10:35:46 +08:00
|
|
|
/* keyring.c */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* fscrypt_master_key_secret - secret key material of an in-use master key
|
|
|
|
*/
|
|
|
|
struct fscrypt_master_key_secret {
|
|
|
|
|
|
|
|
/* Size of the raw key in bytes */
|
|
|
|
u32 size;
|
|
|
|
|
|
|
|
/* The raw key */
|
|
|
|
u8 raw[FSCRYPT_MAX_KEY_SIZE];
|
|
|
|
|
|
|
|
} __randomize_layout;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* fscrypt_master_key - an in-use master key
|
|
|
|
*
|
|
|
|
* This represents a master encryption key which has been added to the
|
|
|
|
* filesystem and can be used to "unlock" the encrypted files which were
|
|
|
|
* encrypted with it.
|
|
|
|
*/
|
|
|
|
struct fscrypt_master_key {
|
|
|
|
|
fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctl
Add a new fscrypt ioctl, FS_IOC_REMOVE_ENCRYPTION_KEY. This ioctl
removes an encryption key that was added by FS_IOC_ADD_ENCRYPTION_KEY.
It wipes the secret key itself, then "locks" the encrypted files and
directories that had been unlocked using that key -- implemented by
evicting the relevant dentries and inodes from the VFS caches.
The problem this solves is that many fscrypt users want the ability to
remove encryption keys, causing the corresponding encrypted directories
to appear "locked" (presented in ciphertext form) again. Moreover,
users want removing an encryption key to *really* remove it, in the
sense that the removed keys cannot be recovered even if kernel memory is
compromised, e.g. by the exploit of a kernel security vulnerability or
by a physical attack. This is desirable after a user logs out of the
system, for example. In many cases users even already assume this to be
the case and are surprised to hear when it's not.
It is not sufficient to simply unlink the master key from the keyring
(or to revoke or invalidate it), since the actual encryption transform
objects are still pinned in memory by their inodes. Therefore, to
really remove a key we must also evict the relevant inodes.
Currently one workaround is to run 'sync && echo 2 >
/proc/sys/vm/drop_caches'. But, that evicts all unused inodes in the
system rather than just the inodes associated with the key being
removed, causing severe performance problems. Moreover, it requires
root privileges, so regular users can't "lock" their encrypted files.
Another workaround, used in Chromium OS kernels, is to add a new
VFS-level ioctl FS_IOC_DROP_CACHE which is a more restricted version of
drop_caches that operates on a single super_block. It does:
shrink_dcache_sb(sb);
invalidate_inodes(sb, false);
But it's still a hack. Yet, the major users of filesystem encryption
want this feature badly enough that they are actually using these hacks.
To properly solve the problem, start maintaining a list of the inodes
which have been "unlocked" using each master key. Originally this
wasn't possible because the kernel didn't keep track of in-use master
keys at all. But, with the ->s_master_keys keyring it is now possible.
Then, add an ioctl FS_IOC_REMOVE_ENCRYPTION_KEY. It finds the specified
master key in ->s_master_keys, then wipes the secret key itself, which
prevents any additional inodes from being unlocked with the key. Then,
it syncs the filesystem and evicts the inodes in the key's list. The
normal inode eviction code will free and wipe the per-file keys (in
->i_crypt_info). Note that freeing ->i_crypt_info without evicting the
inodes was also considered, but would have been racy.
Some inodes may still be in use when a master key is removed, and we
can't simply revoke random file descriptors, mmap's, etc. Thus, the
ioctl simply skips in-use inodes, and returns -EBUSY to indicate that
some inodes weren't evicted. The master key *secret* is still removed,
but the fscrypt_master_key struct remains to keep track of the remaining
inodes. Userspace can then retry the ioctl to evict the remaining
inodes. Alternatively, if userspace adds the key again, the refreshed
secret will be associated with the existing list of inodes so they
remain correctly tracked for future key removals.
The ioctl doesn't wipe pagecache pages. Thus, we tolerate that after a
kernel compromise some portions of plaintext file contents may still be
recoverable from memory. This can be solved by enabling page poisoning
system-wide, which security conscious users may choose to do. But it's
very difficult to solve otherwise, e.g. note that plaintext file
contents may have been read in other places than pagecache pages.
Like FS_IOC_ADD_ENCRYPTION_KEY, FS_IOC_REMOVE_ENCRYPTION_KEY is
initially restricted to privileged users only. This is sufficient for
some use cases, but not all. A later patch will relax this restriction,
but it will require introducing key hashes, among other changes.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-05 10:35:46 +08:00
|
|
|
/*
|
|
|
|
* The secret key material. After FS_IOC_REMOVE_ENCRYPTION_KEY is
|
|
|
|
* executed, this is wiped and no new inodes can be unlocked with this
|
|
|
|
* key; however, there may still be inodes in ->mk_decrypted_inodes
|
|
|
|
* which could not be evicted. As long as some inodes still remain,
|
|
|
|
* FS_IOC_REMOVE_ENCRYPTION_KEY can be retried, or
|
|
|
|
* FS_IOC_ADD_ENCRYPTION_KEY can add the secret again.
|
|
|
|
*
|
|
|
|
* Locking: protected by key->sem.
|
|
|
|
*/
|
fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl
Add a new fscrypt ioctl, FS_IOC_ADD_ENCRYPTION_KEY. This ioctl adds an
encryption key to the filesystem's fscrypt keyring ->s_master_keys,
making any files encrypted with that key appear "unlocked".
Why we need this
~~~~~~~~~~~~~~~~
The main problem is that the "locked/unlocked" (ciphertext/plaintext)
status of encrypted files is global, but the fscrypt keys are not.
fscrypt only looks for keys in the keyring(s) the process accessing the
filesystem is subscribed to: the thread keyring, process keyring, and
session keyring, where the session keyring may contain the user keyring.
Therefore, userspace has to put fscrypt keys in the keyrings for
individual users or sessions. But this means that when a process with a
different keyring tries to access encrypted files, whether they appear
"unlocked" or not is nondeterministic. This is because it depends on
whether the files are currently present in the inode cache.
Fixing this by consistently providing each process its own view of the
filesystem depending on whether it has the key or not isn't feasible due
to how the VFS caches work. Furthermore, while sometimes users expect
this behavior, it is misguided for two reasons. First, it would be an
OS-level access control mechanism largely redundant with existing access
control mechanisms such as UNIX file permissions, ACLs, LSMs, etc.
Encryption is actually for protecting the data at rest.
Second, almost all users of fscrypt actually do need the keys to be
global. The largest users of fscrypt, Android and Chromium OS, achieve
this by having PID 1 create a "session keyring" that is inherited by
every process. This works, but it isn't scalable because it prevents
session keyrings from being used for any other purpose.
On general-purpose Linux distros, the 'fscrypt' userspace tool [1] can't
similarly abuse the session keyring, so to make 'sudo' work on all
systems it has to link all the user keyrings into root's user keyring
[2]. This is ugly and raises security concerns. Moreover it can't make
the keys available to system services, such as sshd trying to access the
user's '~/.ssh' directory (see [3], [4]) or NetworkManager trying to
read certificates from the user's home directory (see [5]); or to Docker
containers (see [6], [7]).
By having an API to add a key to the *filesystem* we'll be able to fix
the above bugs, remove userspace workarounds, and clearly express the
intended semantics: the locked/unlocked status of an encrypted directory
is global, and encryption is orthogonal to OS-level access control.
Why not use the add_key() syscall
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We use an ioctl for this API rather than the existing add_key() system
call because the ioctl gives us the flexibility needed to implement
fscrypt-specific semantics that will be introduced in later patches:
- Supporting key removal with the semantics such that the secret is
removed immediately and any unused inodes using the key are evicted;
also, the eviction of any in-use inodes can be retried.
- Calculating a key-dependent cryptographic identifier and returning it
to userspace.
- Allowing keys to be added and removed by non-root users, but only keys
for v2 encryption policies; and to prevent denial-of-service attacks,
users can only remove keys they themselves have added, and a key is
only really removed after all users who added it have removed it.
Trying to shoehorn these semantics into the keyrings syscalls would be
very difficult, whereas the ioctls make things much easier.
However, to reuse code the implementation still uses the keyrings
service internally. Thus we get lockless RCU-mode key lookups without
having to re-implement it, and the keys automatically show up in
/proc/keys for debugging purposes.
References:
[1] https://github.com/google/fscrypt
[2] https://goo.gl/55cCrI#heading=h.vf09isp98isb
[3] https://github.com/google/fscrypt/issues/111#issuecomment-444347939
[4] https://github.com/google/fscrypt/issues/116
[5] https://bugs.launchpad.net/ubuntu/+source/fscrypt/+bug/1770715
[6] https://github.com/google/fscrypt/issues/128
[7] https://askubuntu.com/questions/1130306/cannot-run-docker-on-an-encrypted-filesystem
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-05 10:35:46 +08:00
|
|
|
struct fscrypt_master_key_secret mk_secret;
|
|
|
|
|
|
|
|
/* Arbitrary key descriptor which was assigned by userspace */
|
|
|
|
struct fscrypt_key_specifier mk_spec;
|
|
|
|
|
fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctl
Add a new fscrypt ioctl, FS_IOC_REMOVE_ENCRYPTION_KEY. This ioctl
removes an encryption key that was added by FS_IOC_ADD_ENCRYPTION_KEY.
It wipes the secret key itself, then "locks" the encrypted files and
directories that had been unlocked using that key -- implemented by
evicting the relevant dentries and inodes from the VFS caches.
The problem this solves is that many fscrypt users want the ability to
remove encryption keys, causing the corresponding encrypted directories
to appear "locked" (presented in ciphertext form) again. Moreover,
users want removing an encryption key to *really* remove it, in the
sense that the removed keys cannot be recovered even if kernel memory is
compromised, e.g. by the exploit of a kernel security vulnerability or
by a physical attack. This is desirable after a user logs out of the
system, for example. In many cases users even already assume this to be
the case and are surprised to hear when it's not.
It is not sufficient to simply unlink the master key from the keyring
(or to revoke or invalidate it), since the actual encryption transform
objects are still pinned in memory by their inodes. Therefore, to
really remove a key we must also evict the relevant inodes.
Currently one workaround is to run 'sync && echo 2 >
/proc/sys/vm/drop_caches'. But, that evicts all unused inodes in the
system rather than just the inodes associated with the key being
removed, causing severe performance problems. Moreover, it requires
root privileges, so regular users can't "lock" their encrypted files.
Another workaround, used in Chromium OS kernels, is to add a new
VFS-level ioctl FS_IOC_DROP_CACHE which is a more restricted version of
drop_caches that operates on a single super_block. It does:
shrink_dcache_sb(sb);
invalidate_inodes(sb, false);
But it's still a hack. Yet, the major users of filesystem encryption
want this feature badly enough that they are actually using these hacks.
To properly solve the problem, start maintaining a list of the inodes
which have been "unlocked" using each master key. Originally this
wasn't possible because the kernel didn't keep track of in-use master
keys at all. But, with the ->s_master_keys keyring it is now possible.
Then, add an ioctl FS_IOC_REMOVE_ENCRYPTION_KEY. It finds the specified
master key in ->s_master_keys, then wipes the secret key itself, which
prevents any additional inodes from being unlocked with the key. Then,
it syncs the filesystem and evicts the inodes in the key's list. The
normal inode eviction code will free and wipe the per-file keys (in
->i_crypt_info). Note that freeing ->i_crypt_info without evicting the
inodes was also considered, but would have been racy.
Some inodes may still be in use when a master key is removed, and we
can't simply revoke random file descriptors, mmap's, etc. Thus, the
ioctl simply skips in-use inodes, and returns -EBUSY to indicate that
some inodes weren't evicted. The master key *secret* is still removed,
but the fscrypt_master_key struct remains to keep track of the remaining
inodes. Userspace can then retry the ioctl to evict the remaining
inodes. Alternatively, if userspace adds the key again, the refreshed
secret will be associated with the existing list of inodes so they
remain correctly tracked for future key removals.
The ioctl doesn't wipe pagecache pages. Thus, we tolerate that after a
kernel compromise some portions of plaintext file contents may still be
recoverable from memory. This can be solved by enabling page poisoning
system-wide, which security conscious users may choose to do. But it's
very difficult to solve otherwise, e.g. note that plaintext file
contents may have been read in other places than pagecache pages.
Like FS_IOC_ADD_ENCRYPTION_KEY, FS_IOC_REMOVE_ENCRYPTION_KEY is
initially restricted to privileged users only. This is sufficient for
some use cases, but not all. A later patch will relax this restriction,
but it will require introducing key hashes, among other changes.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-05 10:35:46 +08:00
|
|
|
/*
|
|
|
|
* Length of ->mk_decrypted_inodes, plus one if mk_secret is present.
|
|
|
|
* Once this goes to 0, the master key is removed from ->s_master_keys.
|
|
|
|
* The 'struct fscrypt_master_key' will continue to live as long as the
|
|
|
|
* 'struct key' whose payload it is, but we won't let this reference
|
|
|
|
* count rise again.
|
|
|
|
*/
|
|
|
|
refcount_t mk_refcount;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* List of inodes that were unlocked using this key. This allows the
|
|
|
|
* inodes to be evicted efficiently if the key is removed.
|
|
|
|
*/
|
|
|
|
struct list_head mk_decrypted_inodes;
|
|
|
|
spinlock_t mk_decrypted_inodes_lock;
|
|
|
|
|
fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl
Add a new fscrypt ioctl, FS_IOC_ADD_ENCRYPTION_KEY. This ioctl adds an
encryption key to the filesystem's fscrypt keyring ->s_master_keys,
making any files encrypted with that key appear "unlocked".
Why we need this
~~~~~~~~~~~~~~~~
The main problem is that the "locked/unlocked" (ciphertext/plaintext)
status of encrypted files is global, but the fscrypt keys are not.
fscrypt only looks for keys in the keyring(s) the process accessing the
filesystem is subscribed to: the thread keyring, process keyring, and
session keyring, where the session keyring may contain the user keyring.
Therefore, userspace has to put fscrypt keys in the keyrings for
individual users or sessions. But this means that when a process with a
different keyring tries to access encrypted files, whether they appear
"unlocked" or not is nondeterministic. This is because it depends on
whether the files are currently present in the inode cache.
Fixing this by consistently providing each process its own view of the
filesystem depending on whether it has the key or not isn't feasible due
to how the VFS caches work. Furthermore, while sometimes users expect
this behavior, it is misguided for two reasons. First, it would be an
OS-level access control mechanism largely redundant with existing access
control mechanisms such as UNIX file permissions, ACLs, LSMs, etc.
Encryption is actually for protecting the data at rest.
Second, almost all users of fscrypt actually do need the keys to be
global. The largest users of fscrypt, Android and Chromium OS, achieve
this by having PID 1 create a "session keyring" that is inherited by
every process. This works, but it isn't scalable because it prevents
session keyrings from being used for any other purpose.
On general-purpose Linux distros, the 'fscrypt' userspace tool [1] can't
similarly abuse the session keyring, so to make 'sudo' work on all
systems it has to link all the user keyrings into root's user keyring
[2]. This is ugly and raises security concerns. Moreover it can't make
the keys available to system services, such as sshd trying to access the
user's '~/.ssh' directory (see [3], [4]) or NetworkManager trying to
read certificates from the user's home directory (see [5]); or to Docker
containers (see [6], [7]).
By having an API to add a key to the *filesystem* we'll be able to fix
the above bugs, remove userspace workarounds, and clearly express the
intended semantics: the locked/unlocked status of an encrypted directory
is global, and encryption is orthogonal to OS-level access control.
Why not use the add_key() syscall
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We use an ioctl for this API rather than the existing add_key() system
call because the ioctl gives us the flexibility needed to implement
fscrypt-specific semantics that will be introduced in later patches:
- Supporting key removal with the semantics such that the secret is
removed immediately and any unused inodes using the key are evicted;
also, the eviction of any in-use inodes can be retried.
- Calculating a key-dependent cryptographic identifier and returning it
to userspace.
- Allowing keys to be added and removed by non-root users, but only keys
for v2 encryption policies; and to prevent denial-of-service attacks,
users can only remove keys they themselves have added, and a key is
only really removed after all users who added it have removed it.
Trying to shoehorn these semantics into the keyrings syscalls would be
very difficult, whereas the ioctls make things much easier.
However, to reuse code the implementation still uses the keyrings
service internally. Thus we get lockless RCU-mode key lookups without
having to re-implement it, and the keys automatically show up in
/proc/keys for debugging purposes.
References:
[1] https://github.com/google/fscrypt
[2] https://goo.gl/55cCrI#heading=h.vf09isp98isb
[3] https://github.com/google/fscrypt/issues/111#issuecomment-444347939
[4] https://github.com/google/fscrypt/issues/116
[5] https://bugs.launchpad.net/ubuntu/+source/fscrypt/+bug/1770715
[6] https://github.com/google/fscrypt/issues/128
[7] https://askubuntu.com/questions/1130306/cannot-run-docker-on-an-encrypted-filesystem
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-05 10:35:46 +08:00
|
|
|
} __randomize_layout;
|
|
|
|
|
fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctl
Add a new fscrypt ioctl, FS_IOC_REMOVE_ENCRYPTION_KEY. This ioctl
removes an encryption key that was added by FS_IOC_ADD_ENCRYPTION_KEY.
It wipes the secret key itself, then "locks" the encrypted files and
directories that had been unlocked using that key -- implemented by
evicting the relevant dentries and inodes from the VFS caches.
The problem this solves is that many fscrypt users want the ability to
remove encryption keys, causing the corresponding encrypted directories
to appear "locked" (presented in ciphertext form) again. Moreover,
users want removing an encryption key to *really* remove it, in the
sense that the removed keys cannot be recovered even if kernel memory is
compromised, e.g. by the exploit of a kernel security vulnerability or
by a physical attack. This is desirable after a user logs out of the
system, for example. In many cases users even already assume this to be
the case and are surprised to hear when it's not.
It is not sufficient to simply unlink the master key from the keyring
(or to revoke or invalidate it), since the actual encryption transform
objects are still pinned in memory by their inodes. Therefore, to
really remove a key we must also evict the relevant inodes.
Currently one workaround is to run 'sync && echo 2 >
/proc/sys/vm/drop_caches'. But, that evicts all unused inodes in the
system rather than just the inodes associated with the key being
removed, causing severe performance problems. Moreover, it requires
root privileges, so regular users can't "lock" their encrypted files.
Another workaround, used in Chromium OS kernels, is to add a new
VFS-level ioctl FS_IOC_DROP_CACHE which is a more restricted version of
drop_caches that operates on a single super_block. It does:
shrink_dcache_sb(sb);
invalidate_inodes(sb, false);
But it's still a hack. Yet, the major users of filesystem encryption
want this feature badly enough that they are actually using these hacks.
To properly solve the problem, start maintaining a list of the inodes
which have been "unlocked" using each master key. Originally this
wasn't possible because the kernel didn't keep track of in-use master
keys at all. But, with the ->s_master_keys keyring it is now possible.
Then, add an ioctl FS_IOC_REMOVE_ENCRYPTION_KEY. It finds the specified
master key in ->s_master_keys, then wipes the secret key itself, which
prevents any additional inodes from being unlocked with the key. Then,
it syncs the filesystem and evicts the inodes in the key's list. The
normal inode eviction code will free and wipe the per-file keys (in
->i_crypt_info). Note that freeing ->i_crypt_info without evicting the
inodes was also considered, but would have been racy.
Some inodes may still be in use when a master key is removed, and we
can't simply revoke random file descriptors, mmap's, etc. Thus, the
ioctl simply skips in-use inodes, and returns -EBUSY to indicate that
some inodes weren't evicted. The master key *secret* is still removed,
but the fscrypt_master_key struct remains to keep track of the remaining
inodes. Userspace can then retry the ioctl to evict the remaining
inodes. Alternatively, if userspace adds the key again, the refreshed
secret will be associated with the existing list of inodes so they
remain correctly tracked for future key removals.
The ioctl doesn't wipe pagecache pages. Thus, we tolerate that after a
kernel compromise some portions of plaintext file contents may still be
recoverable from memory. This can be solved by enabling page poisoning
system-wide, which security conscious users may choose to do. But it's
very difficult to solve otherwise, e.g. note that plaintext file
contents may have been read in other places than pagecache pages.
Like FS_IOC_ADD_ENCRYPTION_KEY, FS_IOC_REMOVE_ENCRYPTION_KEY is
initially restricted to privileged users only. This is sufficient for
some use cases, but not all. A later patch will relax this restriction,
but it will require introducing key hashes, among other changes.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-05 10:35:46 +08:00
|
|
|
static inline bool
|
|
|
|
is_master_key_secret_present(const struct fscrypt_master_key_secret *secret)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* The READ_ONCE() is only necessary for fscrypt_drop_inode() and
|
|
|
|
* fscrypt_key_describe(). These run in atomic context, so they can't
|
|
|
|
* take key->sem and thus 'secret' can change concurrently which would
|
|
|
|
* be a data race. But they only need to know whether the secret *was*
|
|
|
|
* present at the time of check, so READ_ONCE() suffices.
|
|
|
|
*/
|
|
|
|
return READ_ONCE(secret->size) != 0;
|
|
|
|
}
|
|
|
|
|
fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl
Add a new fscrypt ioctl, FS_IOC_ADD_ENCRYPTION_KEY. This ioctl adds an
encryption key to the filesystem's fscrypt keyring ->s_master_keys,
making any files encrypted with that key appear "unlocked".
Why we need this
~~~~~~~~~~~~~~~~
The main problem is that the "locked/unlocked" (ciphertext/plaintext)
status of encrypted files is global, but the fscrypt keys are not.
fscrypt only looks for keys in the keyring(s) the process accessing the
filesystem is subscribed to: the thread keyring, process keyring, and
session keyring, where the session keyring may contain the user keyring.
Therefore, userspace has to put fscrypt keys in the keyrings for
individual users or sessions. But this means that when a process with a
different keyring tries to access encrypted files, whether they appear
"unlocked" or not is nondeterministic. This is because it depends on
whether the files are currently present in the inode cache.
Fixing this by consistently providing each process its own view of the
filesystem depending on whether it has the key or not isn't feasible due
to how the VFS caches work. Furthermore, while sometimes users expect
this behavior, it is misguided for two reasons. First, it would be an
OS-level access control mechanism largely redundant with existing access
control mechanisms such as UNIX file permissions, ACLs, LSMs, etc.
Encryption is actually for protecting the data at rest.
Second, almost all users of fscrypt actually do need the keys to be
global. The largest users of fscrypt, Android and Chromium OS, achieve
this by having PID 1 create a "session keyring" that is inherited by
every process. This works, but it isn't scalable because it prevents
session keyrings from being used for any other purpose.
On general-purpose Linux distros, the 'fscrypt' userspace tool [1] can't
similarly abuse the session keyring, so to make 'sudo' work on all
systems it has to link all the user keyrings into root's user keyring
[2]. This is ugly and raises security concerns. Moreover it can't make
the keys available to system services, such as sshd trying to access the
user's '~/.ssh' directory (see [3], [4]) or NetworkManager trying to
read certificates from the user's home directory (see [5]); or to Docker
containers (see [6], [7]).
By having an API to add a key to the *filesystem* we'll be able to fix
the above bugs, remove userspace workarounds, and clearly express the
intended semantics: the locked/unlocked status of an encrypted directory
is global, and encryption is orthogonal to OS-level access control.
Why not use the add_key() syscall
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We use an ioctl for this API rather than the existing add_key() system
call because the ioctl gives us the flexibility needed to implement
fscrypt-specific semantics that will be introduced in later patches:
- Supporting key removal with the semantics such that the secret is
removed immediately and any unused inodes using the key are evicted;
also, the eviction of any in-use inodes can be retried.
- Calculating a key-dependent cryptographic identifier and returning it
to userspace.
- Allowing keys to be added and removed by non-root users, but only keys
for v2 encryption policies; and to prevent denial-of-service attacks,
users can only remove keys they themselves have added, and a key is
only really removed after all users who added it have removed it.
Trying to shoehorn these semantics into the keyrings syscalls would be
very difficult, whereas the ioctls make things much easier.
However, to reuse code the implementation still uses the keyrings
service internally. Thus we get lockless RCU-mode key lookups without
having to re-implement it, and the keys automatically show up in
/proc/keys for debugging purposes.
References:
[1] https://github.com/google/fscrypt
[2] https://goo.gl/55cCrI#heading=h.vf09isp98isb
[3] https://github.com/google/fscrypt/issues/111#issuecomment-444347939
[4] https://github.com/google/fscrypt/issues/116
[5] https://bugs.launchpad.net/ubuntu/+source/fscrypt/+bug/1770715
[6] https://github.com/google/fscrypt/issues/128
[7] https://askubuntu.com/questions/1130306/cannot-run-docker-on-an-encrypted-filesystem
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-05 10:35:46 +08:00
|
|
|
static inline const char *master_key_spec_type(
|
|
|
|
const struct fscrypt_key_specifier *spec)
|
|
|
|
{
|
|
|
|
switch (spec->type) {
|
|
|
|
case FSCRYPT_KEY_SPEC_TYPE_DESCRIPTOR:
|
|
|
|
return "descriptor";
|
|
|
|
}
|
|
|
|
return "[unknown]";
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int master_key_spec_len(const struct fscrypt_key_specifier *spec)
|
|
|
|
{
|
|
|
|
switch (spec->type) {
|
|
|
|
case FSCRYPT_KEY_SPEC_TYPE_DESCRIPTOR:
|
|
|
|
return FSCRYPT_KEY_DESCRIPTOR_SIZE;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
extern struct key *
|
|
|
|
fscrypt_find_master_key(struct super_block *sb,
|
|
|
|
const struct fscrypt_key_specifier *mk_spec);
|
|
|
|
|
|
|
|
extern int __init fscrypt_init_keyring(void);
|
|
|
|
|
2019-08-05 10:35:45 +08:00
|
|
|
/* keysetup.c */
|
fscrypt: add Adiantum support
Add support for the Adiantum encryption mode to fscrypt. Adiantum is a
tweakable, length-preserving encryption mode with security provably
reducible to that of XChaCha12 and AES-256, subject to a security bound.
It's also a true wide-block mode, unlike XTS. See the paper
"Adiantum: length-preserving encryption for entry-level processors"
(https://eprint.iacr.org/2018/720.pdf) for more details. Also see
commit 059c2a4d8e16 ("crypto: adiantum - add Adiantum support").
On sufficiently long messages, Adiantum's bottlenecks are XChaCha12 and
the NH hash function. These algorithms are fast even on processors
without dedicated crypto instructions. Adiantum makes it feasible to
enable storage encryption on low-end mobile devices that lack AES
instructions; currently such devices are unencrypted. On ARM Cortex-A7,
on 4096-byte messages Adiantum encryption is about 4 times faster than
AES-256-XTS encryption; decryption is about 5 times faster.
In fscrypt, Adiantum is suitable for encrypting both file contents and
names. With filenames, it fixes a known weakness: when two filenames in
a directory share a common prefix of >= 16 bytes, with CTS-CBC their
encrypted filenames share a common prefix too, leaking information.
Adiantum does not have this problem.
Since Adiantum also accepts long tweaks (IVs), it's also safe to use the
master key directly for Adiantum encryption rather than deriving
per-file keys, provided that the per-file nonce is included in the IVs
and the master key isn't used for any other encryption mode. This
configuration saves memory and improves performance. A new fscrypt
policy flag is added to allow users to opt-in to this configuration.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-01-06 21:36:21 +08:00
|
|
|
|
|
|
|
struct fscrypt_mode {
|
|
|
|
const char *friendly_name;
|
|
|
|
const char *cipher_str;
|
|
|
|
int keysize;
|
|
|
|
int ivsize;
|
|
|
|
bool logged_impl_name;
|
|
|
|
bool needs_essiv;
|
|
|
|
};
|
|
|
|
|
2019-08-05 10:35:45 +08:00
|
|
|
static inline bool
|
|
|
|
fscrypt_mode_supports_direct_key(const struct fscrypt_mode *mode)
|
|
|
|
{
|
|
|
|
return mode->ivsize >= offsetofend(union fscrypt_iv, nonce);
|
|
|
|
}
|
|
|
|
|
2019-08-05 10:35:45 +08:00
|
|
|
extern struct crypto_skcipher *
|
|
|
|
fscrypt_allocate_skcipher(struct fscrypt_mode *mode, const u8 *raw_key,
|
|
|
|
const struct inode *inode);
|
|
|
|
|
|
|
|
extern int fscrypt_set_derived_key(struct fscrypt_info *ci,
|
|
|
|
const u8 *derived_key);
|
|
|
|
|
|
|
|
/* keysetup_v1.c */
|
|
|
|
|
|
|
|
extern void fscrypt_put_direct_key(struct fscrypt_direct_key *dk);
|
|
|
|
|
|
|
|
extern int fscrypt_setup_v1_file_key(struct fscrypt_info *ci,
|
|
|
|
const u8 *raw_master_key);
|
|
|
|
|
|
|
|
extern int fscrypt_setup_v1_file_key_via_subscribed_keyrings(
|
|
|
|
struct fscrypt_info *ci);
|
|
|
|
|
2016-11-27 09:32:46 +08:00
|
|
|
#endif /* _FSCRYPT_PRIVATE_H */
|