2018-09-25 15:34:05 +08:00
|
|
|
# SPDX-License-Identifier: GPL-2.0
|
|
|
|
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
config CLK_RENESAS
|
|
|
|
bool "Renesas SoC clock support" if COMPILE_TEST && !ARCH_RENESAS
|
|
|
|
default y if ARCH_RENESAS
|
|
|
|
select CLK_EMEV2 if ARCH_EMEV2
|
|
|
|
select CLK_RZA1 if ARCH_R7S72100
|
2018-09-08 00:58:49 +08:00
|
|
|
select CLK_R7S9210 if ARCH_R7S9210
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
select CLK_R8A73A4 if ARCH_R8A73A4
|
|
|
|
select CLK_R8A7740 if ARCH_R8A7740
|
2018-09-11 18:12:49 +08:00
|
|
|
select CLK_R8A7743 if ARCH_R8A7743 || ARCH_R8A7744
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
select CLK_R8A7745 if ARCH_R8A7745
|
2018-03-29 03:26:12 +08:00
|
|
|
select CLK_R8A77470 if ARCH_R8A77470
|
2018-08-02 22:57:51 +08:00
|
|
|
select CLK_R8A774A1 if ARCH_R8A774A1
|
2019-09-19 16:17:14 +08:00
|
|
|
select CLK_R8A774B1 if ARCH_R8A774B1
|
2018-09-12 18:41:53 +08:00
|
|
|
select CLK_R8A774C0 if ARCH_R8A774C0
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
select CLK_R8A7778 if ARCH_R8A7778
|
|
|
|
select CLK_R8A7779 if ARCH_R8A7779
|
|
|
|
select CLK_R8A7790 if ARCH_R8A7790
|
|
|
|
select CLK_R8A7791 if ARCH_R8A7791 || ARCH_R8A7793
|
|
|
|
select CLK_R8A7792 if ARCH_R8A7792
|
|
|
|
select CLK_R8A7794 if ARCH_R8A7794
|
|
|
|
select CLK_R8A7795 if ARCH_R8A7795
|
2019-10-23 20:29:40 +08:00
|
|
|
select CLK_R8A77960 if ARCH_R8A77960 || ARCH_R8A7796
|
2019-10-23 20:29:41 +08:00
|
|
|
select CLK_R8A77961 if ARCH_R8A77961
|
2018-02-20 23:12:03 +08:00
|
|
|
select CLK_R8A77965 if ARCH_R8A77965
|
2017-09-09 05:34:20 +08:00
|
|
|
select CLK_R8A77970 if ARCH_R8A77970
|
2018-02-15 19:58:45 +08:00
|
|
|
select CLK_R8A77980 if ARCH_R8A77980
|
2018-04-20 20:27:44 +08:00
|
|
|
select CLK_R8A77990 if ARCH_R8A77990
|
2017-07-12 16:47:36 +08:00
|
|
|
select CLK_R8A77995 if ARCH_R8A77995
|
2018-06-14 18:56:34 +08:00
|
|
|
select CLK_R9A06G032 if ARCH_R9A06G032
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
select CLK_SH73A0 if ARCH_SH73A0
|
|
|
|
|
|
|
|
if CLK_RENESAS
|
|
|
|
|
|
|
|
# SoC
|
|
|
|
config CLK_EMEV2
|
|
|
|
bool "Emma Mobile EV2 clock support" if COMPILE_TEST
|
|
|
|
|
|
|
|
config CLK_RZA1
|
2017-05-17 23:25:47 +08:00
|
|
|
bool "RZ/A1H clock support" if COMPILE_TEST
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
select CLK_RENESAS_CPG_MSTP
|
|
|
|
|
2018-09-08 00:58:49 +08:00
|
|
|
config CLK_R7S9210
|
|
|
|
bool "RZ/A2 clock support" if COMPILE_TEST
|
|
|
|
select CLK_RENESAS_CPG_MSSR
|
|
|
|
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
config CLK_R8A73A4
|
2017-05-17 23:25:47 +08:00
|
|
|
bool "R-Mobile APE6 clock support" if COMPILE_TEST
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
select CLK_RENESAS_CPG_MSTP
|
|
|
|
select CLK_RENESAS_DIV6
|
|
|
|
|
|
|
|
config CLK_R8A7740
|
2017-05-17 23:25:47 +08:00
|
|
|
bool "R-Mobile A1 clock support" if COMPILE_TEST
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
select CLK_RENESAS_CPG_MSTP
|
|
|
|
select CLK_RENESAS_DIV6
|
|
|
|
|
|
|
|
config CLK_R8A7743
|
2017-05-17 23:25:47 +08:00
|
|
|
bool "RZ/G1M clock support" if COMPILE_TEST
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
select CLK_RCAR_GEN2_CPG
|
|
|
|
|
|
|
|
config CLK_R8A7745
|
2017-05-17 23:25:47 +08:00
|
|
|
bool "RZ/G1E clock support" if COMPILE_TEST
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
select CLK_RCAR_GEN2_CPG
|
|
|
|
|
2018-03-29 03:26:12 +08:00
|
|
|
config CLK_R8A77470
|
|
|
|
bool "RZ/G1C clock support" if COMPILE_TEST
|
|
|
|
select CLK_RCAR_GEN2_CPG
|
|
|
|
|
2018-08-02 22:57:51 +08:00
|
|
|
config CLK_R8A774A1
|
|
|
|
bool "RZ/G2M clock support" if COMPILE_TEST
|
|
|
|
select CLK_RCAR_GEN3_CPG
|
|
|
|
|
2019-09-19 16:17:14 +08:00
|
|
|
config CLK_R8A774B1
|
|
|
|
bool "RZ/G2N clock support" if COMPILE_TEST
|
|
|
|
select CLK_RCAR_GEN3_CPG
|
|
|
|
|
2018-09-12 18:41:53 +08:00
|
|
|
config CLK_R8A774C0
|
|
|
|
bool "RZ/G2E clock support" if COMPILE_TEST
|
|
|
|
select CLK_RCAR_GEN3_CPG
|
|
|
|
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
config CLK_R8A7778
|
2017-05-17 23:25:47 +08:00
|
|
|
bool "R-Car M1A clock support" if COMPILE_TEST
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
select CLK_RENESAS_CPG_MSTP
|
|
|
|
|
|
|
|
config CLK_R8A7779
|
2017-05-17 23:25:47 +08:00
|
|
|
bool "R-Car H1 clock support" if COMPILE_TEST
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
select CLK_RENESAS_CPG_MSTP
|
|
|
|
|
|
|
|
config CLK_R8A7790
|
2017-05-17 23:25:47 +08:00
|
|
|
bool "R-Car H2 clock support" if COMPILE_TEST
|
2017-03-20 01:05:42 +08:00
|
|
|
select CLK_RCAR_GEN2_CPG
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
select CLK_RENESAS_DIV6
|
|
|
|
|
|
|
|
config CLK_R8A7791
|
2017-05-17 23:25:47 +08:00
|
|
|
bool "R-Car M2-W/N clock support" if COMPILE_TEST
|
2015-10-16 17:41:19 +08:00
|
|
|
select CLK_RCAR_GEN2_CPG
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
select CLK_RENESAS_DIV6
|
|
|
|
|
|
|
|
config CLK_R8A7792
|
2017-05-17 23:25:47 +08:00
|
|
|
bool "R-Car V2H clock support" if COMPILE_TEST
|
2017-03-20 01:08:59 +08:00
|
|
|
select CLK_RCAR_GEN2_CPG
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
|
|
|
|
config CLK_R8A7794
|
2017-05-17 23:25:47 +08:00
|
|
|
bool "R-Car E2 clock support" if COMPILE_TEST
|
2017-03-20 01:12:51 +08:00
|
|
|
select CLK_RCAR_GEN2_CPG
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
select CLK_RENESAS_DIV6
|
|
|
|
|
|
|
|
config CLK_R8A7795
|
2017-05-17 23:25:47 +08:00
|
|
|
bool "R-Car H3 clock support" if COMPILE_TEST
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
select CLK_RCAR_GEN3_CPG
|
|
|
|
|
2019-10-23 20:29:40 +08:00
|
|
|
config CLK_R8A77960
|
2017-05-17 23:25:47 +08:00
|
|
|
bool "R-Car M3-W clock support" if COMPILE_TEST
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
select CLK_RCAR_GEN3_CPG
|
|
|
|
|
2019-10-23 20:29:41 +08:00
|
|
|
config CLK_R8A77961
|
|
|
|
bool "R-Car M3-W+ clock support" if COMPILE_TEST
|
|
|
|
select CLK_RCAR_GEN3_CPG
|
|
|
|
|
2018-02-20 23:12:03 +08:00
|
|
|
config CLK_R8A77965
|
|
|
|
bool "R-Car M3-N clock support" if COMPILE_TEST
|
|
|
|
select CLK_RCAR_GEN3_CPG
|
|
|
|
|
2017-09-09 05:34:20 +08:00
|
|
|
config CLK_R8A77970
|
|
|
|
bool "R-Car V3M clock support" if COMPILE_TEST
|
|
|
|
select CLK_RCAR_GEN3_CPG
|
|
|
|
|
2018-02-15 19:58:45 +08:00
|
|
|
config CLK_R8A77980
|
|
|
|
bool "R-Car V3H clock support" if COMPILE_TEST
|
|
|
|
select CLK_RCAR_GEN3_CPG
|
|
|
|
|
2018-04-20 20:27:44 +08:00
|
|
|
config CLK_R8A77990
|
|
|
|
bool "R-Car E3 clock support" if COMPILE_TEST
|
|
|
|
select CLK_RCAR_GEN3_CPG
|
|
|
|
|
2017-07-12 16:47:36 +08:00
|
|
|
config CLK_R8A77995
|
|
|
|
bool "R-Car D3 clock support" if COMPILE_TEST
|
|
|
|
select CLK_RCAR_GEN3_CPG
|
|
|
|
|
2018-06-14 18:56:34 +08:00
|
|
|
config CLK_R9A06G032
|
|
|
|
bool "Renesas R9A06G032 clock driver"
|
|
|
|
help
|
|
|
|
This is a driver for R9A06G032 clocks
|
|
|
|
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
config CLK_SH73A0
|
2017-05-17 23:25:47 +08:00
|
|
|
bool "SH-Mobile AG5 clock support" if COMPILE_TEST
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
select CLK_RENESAS_CPG_MSTP
|
|
|
|
select CLK_RENESAS_DIV6
|
|
|
|
|
|
|
|
|
|
|
|
# Family
|
|
|
|
config CLK_RCAR_GEN2_CPG
|
2017-05-17 23:25:47 +08:00
|
|
|
bool "R-Car Gen2 CPG clock support" if COMPILE_TEST
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
select CLK_RENESAS_CPG_MSSR
|
|
|
|
|
|
|
|
config CLK_RCAR_GEN3_CPG
|
2017-05-17 23:25:47 +08:00
|
|
|
bool "R-Car Gen3 CPG clock support" if COMPILE_TEST
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
select CLK_RENESAS_CPG_MSSR
|
|
|
|
|
2017-07-25 14:26:27 +08:00
|
|
|
config CLK_RCAR_USB2_CLOCK_SEL
|
|
|
|
bool "Renesas R-Car USB2 clock selector support"
|
|
|
|
depends on ARCH_RENESAS || COMPILE_TEST
|
|
|
|
help
|
|
|
|
This is a driver for R-Car USB2 clock selector
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
|
|
|
|
# Generic
|
2016-04-13 17:08:42 +08:00
|
|
|
config CLK_RENESAS_CPG_MSSR
|
2017-05-17 23:25:47 +08:00
|
|
|
bool "CPG/MSSR clock support" if COMPILE_TEST
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
select CLK_RENESAS_DIV6
|
2016-04-13 17:08:42 +08:00
|
|
|
|
|
|
|
config CLK_RENESAS_CPG_MSTP
|
2017-05-17 23:25:47 +08:00
|
|
|
bool "MSTP clock support" if COMPILE_TEST
|
clk: renesas: Rework Kconfig and Makefile logic
The goals are to:
- Allow precise control over and automatic selection of which
(sub)drivers are used for which SoC (which may change in the
future),
- Allow adding support for new SoCs easily,
- Allow compile-testing of all (sub)drivers,
- Keep driver selection logic in the subsystem-specific Kconfig,
independent from the architecture-specific Kconfig (i.e. no "select"
from arch/arm64/Kconfig.platforms), to avoid dependencies.
This is implemented by:
- Introducing Kconfig symbols for all drivers and sub-drivers,
- Introducing the Kconfig symbol CLK_RENESAS, which is enabled
automatically when building for a Renesas ARM platform, and which
enables all required drivers without interaction of the user, based
on SoC-specific ARCH_* symbols,
- Allowing the user to enable any Kconfig symbol manually if
COMPILE_TEST is enabled,
- Using the new Kconfig symbols instead of the ARCH_* symbols to
control compilation in the Makefile,
- Always entering drivers/clk/renesas/ during the build.
Note that currently not all (sub)drivers are enabled for
compile-testing, as they depend on independent fixes in other
subsystems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-24 22:54:14 +08:00
|
|
|
|
|
|
|
config CLK_RENESAS_DIV6
|
|
|
|
bool "DIV6 clock support" if COMPILE_TEST
|
|
|
|
|
|
|
|
endif # CLK_RENESAS
|