OpenCloudOS-Kernel/kernel/irq/irqdomain.c

1372 lines
38 KiB
C
Raw Normal View History

#define pr_fmt(fmt) "irq: " fmt
#include <linux/debugfs.h>
#include <linux/hardirq.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdesc.h>
#include <linux/irqdomain.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/topology.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/smp.h>
#include <linux/fs.h>
static LIST_HEAD(irq_domain_list);
static DEFINE_MUTEX(irq_domain_mutex);
static DEFINE_MUTEX(revmap_trees_mutex);
static struct irq_domain *irq_default_domain;
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 22:20:14 +08:00
static int irq_domain_alloc_descs(int virq, unsigned int nr_irqs,
irq_hw_number_t hwirq, int node);
static void irq_domain_check_hierarchy(struct irq_domain *domain);
struct irqchip_fwid {
struct fwnode_handle fwnode;
char *name;
void *data;
};
/**
* irq_domain_alloc_fwnode - Allocate a fwnode_handle suitable for
* identifying an irq domain
* @data: optional user-provided data
*
* Allocate a struct device_node, and return a poiner to the embedded
* fwnode_handle (or NULL on failure).
*/
struct fwnode_handle *irq_domain_alloc_fwnode(void *data)
{
struct irqchip_fwid *fwid;
char *name;
fwid = kzalloc(sizeof(*fwid), GFP_KERNEL);
name = kasprintf(GFP_KERNEL, "irqchip@%p", data);
if (!fwid || !name) {
kfree(fwid);
kfree(name);
return NULL;
}
fwid->name = name;
fwid->data = data;
fwid->fwnode.type = FWNODE_IRQCHIP;
return &fwid->fwnode;
}
/**
* irq_domain_free_fwnode - Free a non-OF-backed fwnode_handle
*
* Free a fwnode_handle allocated with irq_domain_alloc_fwnode.
*/
void irq_domain_free_fwnode(struct fwnode_handle *fwnode)
{
struct irqchip_fwid *fwid;
if (WARN_ON(fwnode->type != FWNODE_IRQCHIP))
return;
fwid = container_of(fwnode, struct irqchip_fwid, fwnode);
kfree(fwid->name);
kfree(fwid);
}
/**
* __irq_domain_add() - Allocate a new irq_domain data structure
* @of_node: optional device-tree node of the interrupt controller
* @size: Size of linear map; 0 for radix mapping only
* @hwirq_max: Maximum number of interrupts supported by controller
* @direct_max: Maximum value of direct maps; Use ~0 for no limit; 0 for no
* direct mapping
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 22:20:14 +08:00
* @ops: domain callbacks
* @host_data: Controller private data pointer
*
* Allocates and initialize and irq_domain structure.
* Returns pointer to IRQ domain, or NULL on failure.
*/
struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, int size,
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
irq_hw_number_t hwirq_max, int direct_max,
const struct irq_domain_ops *ops,
void *host_data)
{
struct irq_domain *domain;
struct device_node *of_node;
of_node = to_of_node(fwnode);
domain = kzalloc_node(sizeof(*domain) + (sizeof(unsigned int) * size),
GFP_KERNEL, of_node_to_nid(of_node));
if (WARN_ON(!domain))
return NULL;
of_node_get(of_node);
/* Fill structure */
INIT_RADIX_TREE(&domain->revmap_tree, GFP_KERNEL);
domain->ops = ops;
domain->host_data = host_data;
domain->fwnode = fwnode;
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
domain->hwirq_max = hwirq_max;
domain->revmap_size = size;
domain->revmap_direct_max_irq = direct_max;
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 22:20:14 +08:00
irq_domain_check_hierarchy(domain);
mutex_lock(&irq_domain_mutex);
list_add(&domain->link, &irq_domain_list);
mutex_unlock(&irq_domain_mutex);
pr_debug("Added domain %s\n", domain->name);
return domain;
}
EXPORT_SYMBOL_GPL(__irq_domain_add);
/**
* irq_domain_remove() - Remove an irq domain.
* @domain: domain to remove
*
* This routine is used to remove an irq domain. The caller must ensure
* that all mappings within the domain have been disposed of prior to
* use, depending on the revmap type.
*/
void irq_domain_remove(struct irq_domain *domain)
{
mutex_lock(&irq_domain_mutex);
/*
* radix_tree_delete() takes care of destroying the root
* node when all entries are removed. Shout if there are
* any mappings left.
*/
WARN_ON(domain->revmap_tree.height);
list_del(&domain->link);
/*
* If the going away domain is the default one, reset it.
*/
if (unlikely(irq_default_domain == domain))
irq_set_default_host(NULL);
mutex_unlock(&irq_domain_mutex);
pr_debug("Removed domain %s\n", domain->name);
of_node_put(irq_domain_get_of_node(domain));
kfree(domain);
}
EXPORT_SYMBOL_GPL(irq_domain_remove);
/**
* irq_domain_add_simple() - Register an irq_domain and optionally map a range of irqs
* @of_node: pointer to interrupt controller's device tree node.
* @size: total number of irqs in mapping
* @first_irq: first number of irq block assigned to the domain,
* pass zero to assign irqs on-the-fly. If first_irq is non-zero, then
* pre-map all of the irqs in the domain to virqs starting at first_irq.
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 22:20:14 +08:00
* @ops: domain callbacks
* @host_data: Controller private data pointer
*
* Allocates an irq_domain, and optionally if first_irq is positive then also
* allocate irq_descs and map all of the hwirqs to virqs starting at first_irq.
*
* This is intended to implement the expected behaviour for most
* interrupt controllers. If device tree is used, then first_irq will be 0 and
* irqs get mapped dynamically on the fly. However, if the controller requires
* static virq assignments (non-DT boot) then it will set that up correctly.
*/
struct irq_domain *irq_domain_add_simple(struct device_node *of_node,
unsigned int size,
unsigned int first_irq,
const struct irq_domain_ops *ops,
void *host_data)
{
struct irq_domain *domain;
domain = __irq_domain_add(of_node_to_fwnode(of_node), size, size, 0, ops, host_data);
if (!domain)
return NULL;
if (first_irq > 0) {
if (IS_ENABLED(CONFIG_SPARSE_IRQ)) {
/* attempt to allocated irq_descs */
int rc = irq_alloc_descs(first_irq, first_irq, size,
of_node_to_nid(of_node));
if (rc < 0)
pr_info("Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
first_irq);
}
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
irq_domain_associate_many(domain, first_irq, 0, size);
}
return domain;
}
EXPORT_SYMBOL_GPL(irq_domain_add_simple);
/**
* irq_domain_add_legacy() - Allocate and register a legacy revmap irq_domain.
* @of_node: pointer to interrupt controller's device tree node.
* @size: total number of irqs in legacy mapping
* @first_irq: first number of irq block assigned to the domain
* @first_hwirq: first hwirq number to use for the translation. Should normally
* be '0', but a positive integer can be used if the effective
* hwirqs numbering does not begin at zero.
* @ops: map/unmap domain callbacks
* @host_data: Controller private data pointer
*
* Note: the map() callback will be called before this function returns
* for all legacy interrupts except 0 (which is always the invalid irq for
* a legacy controller).
*/
struct irq_domain *irq_domain_add_legacy(struct device_node *of_node,
unsigned int size,
unsigned int first_irq,
irq_hw_number_t first_hwirq,
const struct irq_domain_ops *ops,
void *host_data)
{
struct irq_domain *domain;
domain = __irq_domain_add(of_node_to_fwnode(of_node), first_hwirq + size,
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
first_hwirq + size, 0, ops, host_data);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 22:20:14 +08:00
if (domain)
irq_domain_associate_many(domain, first_irq, first_hwirq, size);
return domain;
}
EXPORT_SYMBOL_GPL(irq_domain_add_legacy);
/**
* irq_find_matching_fwnode() - Locates a domain for a given fwnode
* @fwnode: FW descriptor of the interrupt controller
genirq/irqdomain: Allow irq domain aliasing It is not uncommon (at least with the ARM stuff) to have a piece of hardware that implements different flavours of "interrupts". A typical example of this is the GICv3 ITS, which implements standard PCI/MSI support, but also some form of "generic MSI". So far, the PCI/MSI domain is registered using the ITS device_node, so that irq_find_host can return it. On the contrary, the raw MSI domain is not registered with an device_node, making it impossible to be looked up by another subsystem (obviously, using the same device_node twice would only result in confusion, as it is not defined which one irq_find_host would return). A solution to this is to "type" domains that may be aliasing, and to be able to lookup an device_node that matches a given type. For this, we introduce irq_find_matching_host() as a superset of irq_find_host: struct irq_domain *irq_find_matching_host(struct device_node *node, enum irq_domain_bus_token bus_token); where bus_token is the "type" we want to match the domain against (so far, only DOMAIN_BUS_ANY is defined). This result in some moderately invasive changes on the PPC side (which is the only user of the .match method). This has otherwise no functionnal change. Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-28 21:46:08 +08:00
* @bus_token: domain-specific data
*/
struct irq_domain *irq_find_matching_fwnode(struct fwnode_handle *fwnode,
enum irq_domain_bus_token bus_token)
{
struct irq_domain *h, *found = NULL;
int rc;
/* We might want to match the legacy controller last since
* it might potentially be set to match all interrupts in
* the absence of a device node. This isn't a problem so far
* yet though...
genirq/irqdomain: Allow irq domain aliasing It is not uncommon (at least with the ARM stuff) to have a piece of hardware that implements different flavours of "interrupts". A typical example of this is the GICv3 ITS, which implements standard PCI/MSI support, but also some form of "generic MSI". So far, the PCI/MSI domain is registered using the ITS device_node, so that irq_find_host can return it. On the contrary, the raw MSI domain is not registered with an device_node, making it impossible to be looked up by another subsystem (obviously, using the same device_node twice would only result in confusion, as it is not defined which one irq_find_host would return). A solution to this is to "type" domains that may be aliasing, and to be able to lookup an device_node that matches a given type. For this, we introduce irq_find_matching_host() as a superset of irq_find_host: struct irq_domain *irq_find_matching_host(struct device_node *node, enum irq_domain_bus_token bus_token); where bus_token is the "type" we want to match the domain against (so far, only DOMAIN_BUS_ANY is defined). This result in some moderately invasive changes on the PPC side (which is the only user of the .match method). This has otherwise no functionnal change. Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-28 21:46:08 +08:00
*
* bus_token == DOMAIN_BUS_ANY matches any domain, any other
* values must generate an exact match for the domain to be
* selected.
*/
mutex_lock(&irq_domain_mutex);
list_for_each_entry(h, &irq_domain_list, link) {
if (h->ops->match)
rc = h->ops->match(h, to_of_node(fwnode), bus_token);
else
rc = ((fwnode != NULL) && (h->fwnode == fwnode) &&
genirq/irqdomain: Allow irq domain aliasing It is not uncommon (at least with the ARM stuff) to have a piece of hardware that implements different flavours of "interrupts". A typical example of this is the GICv3 ITS, which implements standard PCI/MSI support, but also some form of "generic MSI". So far, the PCI/MSI domain is registered using the ITS device_node, so that irq_find_host can return it. On the contrary, the raw MSI domain is not registered with an device_node, making it impossible to be looked up by another subsystem (obviously, using the same device_node twice would only result in confusion, as it is not defined which one irq_find_host would return). A solution to this is to "type" domains that may be aliasing, and to be able to lookup an device_node that matches a given type. For this, we introduce irq_find_matching_host() as a superset of irq_find_host: struct irq_domain *irq_find_matching_host(struct device_node *node, enum irq_domain_bus_token bus_token); where bus_token is the "type" we want to match the domain against (so far, only DOMAIN_BUS_ANY is defined). This result in some moderately invasive changes on the PPC side (which is the only user of the .match method). This has otherwise no functionnal change. Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-28 21:46:08 +08:00
((bus_token == DOMAIN_BUS_ANY) ||
(h->bus_token == bus_token)));
if (rc) {
found = h;
break;
}
}
mutex_unlock(&irq_domain_mutex);
return found;
}
EXPORT_SYMBOL_GPL(irq_find_matching_fwnode);
/**
* irq_set_default_host() - Set a "default" irq domain
* @domain: default domain pointer
*
* For convenience, it's possible to set a "default" domain that will be used
* whenever NULL is passed to irq_create_mapping(). It makes life easier for
* platforms that want to manipulate a few hard coded interrupt numbers that
* aren't properly represented in the device-tree.
*/
void irq_set_default_host(struct irq_domain *domain)
{
pr_debug("Default domain set to @0x%p\n", domain);
irq_default_domain = domain;
}
EXPORT_SYMBOL_GPL(irq_set_default_host);
void irq_domain_disassociate(struct irq_domain *domain, unsigned int irq)
{
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
struct irq_data *irq_data = irq_get_irq_data(irq);
irq_hw_number_t hwirq;
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
if (WARN(!irq_data || irq_data->domain != domain,
"virq%i doesn't exist; cannot disassociate\n", irq))
return;
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
hwirq = irq_data->hwirq;
irq_set_status_flags(irq, IRQ_NOREQUEST);
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
/* remove chip and handler */
irq_set_chip_and_handler(irq, NULL, NULL);
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
/* Make sure it's completed */
synchronize_irq(irq);
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
/* Tell the PIC about it */
if (domain->ops->unmap)
domain->ops->unmap(domain, irq);
smp_mb();
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
irq_data->domain = NULL;
irq_data->hwirq = 0;
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
/* Clear reverse map for this hwirq */
if (hwirq < domain->revmap_size) {
domain->linear_revmap[hwirq] = 0;
} else {
mutex_lock(&revmap_trees_mutex);
radix_tree_delete(&domain->revmap_tree, hwirq);
mutex_unlock(&revmap_trees_mutex);
}
}
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
int irq_domain_associate(struct irq_domain *domain, unsigned int virq,
irq_hw_number_t hwirq)
{
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
struct irq_data *irq_data = irq_get_irq_data(virq);
int ret;
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
if (WARN(hwirq >= domain->hwirq_max,
"error: hwirq 0x%x is too large for %s\n", (int)hwirq, domain->name))
return -EINVAL;
if (WARN(!irq_data, "error: virq%i is not allocated", virq))
return -EINVAL;
if (WARN(irq_data->domain, "error: virq%i is already associated", virq))
return -EINVAL;
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
mutex_lock(&irq_domain_mutex);
irq_data->hwirq = hwirq;
irq_data->domain = domain;
if (domain->ops->map) {
ret = domain->ops->map(domain, virq, hwirq);
if (ret != 0) {
/*
* If map() returns -EPERM, this interrupt is protected
* by the firmware or some other service and shall not
* be mapped. Don't bother telling the user about it.
*/
if (ret != -EPERM) {
pr_info("%s didn't like hwirq-0x%lx to VIRQ%i mapping (rc=%d)\n",
domain->name, hwirq, virq, ret);
}
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
irq_data->domain = NULL;
irq_data->hwirq = 0;
mutex_unlock(&irq_domain_mutex);
return ret;
irqdomain: Support for static IRQ mapping and association. This adds a new strict mapping API for supporting creation of linux IRQs at existing positions within the domain. The new routines are as follows: For dynamic allocation and insertion to specified ranges: - irq_create_identity_mapping() - irq_create_strict_mappings() These will allocate and associate a range of linux IRQs at the specified location. This can be used by controllers that have their own static linux IRQ definitions to map a hwirq range to, as well as for platforms that wish to establish 1:1 identity mapping between linux and hwirq space. For insertion to specified ranges by platforms that do their own irq_desc management: - irq_domain_associate() - irq_domain_associate_many() These in turn call back in to the domain's ->map() routine, for further processing by the platform. Disassociation of IRQs get handled through irq_dispose_mapping() as normal. With these in place it should be possible to begin migration of legacy IRQ domains to linear ones, without requiring special handling for static vs dynamic IRQ definitions in DT vs non-DT paths. This also makes it possible for domains with static mappings to adopt whichever tree model best fits their needs, rather than simply restricting them to linear revmaps. Signed-off-by: Paul Mundt <lethal@linux-sh.org> [grant.likely: Reorganized irq_domain_associate{,_many} to have all logic in one place] [grant.likely: Add error checking for unallocated irq_descs at associate time] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-06-18 06:17:04 +08:00
}
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
/* If not already assigned, give the domain the chip's name */
if (!domain->name && irq_data->chip)
domain->name = irq_data->chip->name;
}
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
if (hwirq < domain->revmap_size) {
domain->linear_revmap[hwirq] = virq;
} else {
mutex_lock(&revmap_trees_mutex);
radix_tree_insert(&domain->revmap_tree, hwirq, irq_data);
mutex_unlock(&revmap_trees_mutex);
irqdomain: Support for static IRQ mapping and association. This adds a new strict mapping API for supporting creation of linux IRQs at existing positions within the domain. The new routines are as follows: For dynamic allocation and insertion to specified ranges: - irq_create_identity_mapping() - irq_create_strict_mappings() These will allocate and associate a range of linux IRQs at the specified location. This can be used by controllers that have their own static linux IRQ definitions to map a hwirq range to, as well as for platforms that wish to establish 1:1 identity mapping between linux and hwirq space. For insertion to specified ranges by platforms that do their own irq_desc management: - irq_domain_associate() - irq_domain_associate_many() These in turn call back in to the domain's ->map() routine, for further processing by the platform. Disassociation of IRQs get handled through irq_dispose_mapping() as normal. With these in place it should be possible to begin migration of legacy IRQ domains to linear ones, without requiring special handling for static vs dynamic IRQ definitions in DT vs non-DT paths. This also makes it possible for domains with static mappings to adopt whichever tree model best fits their needs, rather than simply restricting them to linear revmaps. Signed-off-by: Paul Mundt <lethal@linux-sh.org> [grant.likely: Reorganized irq_domain_associate{,_many} to have all logic in one place] [grant.likely: Add error checking for unallocated irq_descs at associate time] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-06-18 06:17:04 +08:00
}
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
mutex_unlock(&irq_domain_mutex);
irq_clear_status_flags(virq, IRQ_NOREQUEST);
return 0;
}
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
EXPORT_SYMBOL_GPL(irq_domain_associate);
irqdomain: Support for static IRQ mapping and association. This adds a new strict mapping API for supporting creation of linux IRQs at existing positions within the domain. The new routines are as follows: For dynamic allocation and insertion to specified ranges: - irq_create_identity_mapping() - irq_create_strict_mappings() These will allocate and associate a range of linux IRQs at the specified location. This can be used by controllers that have their own static linux IRQ definitions to map a hwirq range to, as well as for platforms that wish to establish 1:1 identity mapping between linux and hwirq space. For insertion to specified ranges by platforms that do their own irq_desc management: - irq_domain_associate() - irq_domain_associate_many() These in turn call back in to the domain's ->map() routine, for further processing by the platform. Disassociation of IRQs get handled through irq_dispose_mapping() as normal. With these in place it should be possible to begin migration of legacy IRQ domains to linear ones, without requiring special handling for static vs dynamic IRQ definitions in DT vs non-DT paths. This also makes it possible for domains with static mappings to adopt whichever tree model best fits their needs, rather than simply restricting them to linear revmaps. Signed-off-by: Paul Mundt <lethal@linux-sh.org> [grant.likely: Reorganized irq_domain_associate{,_many} to have all logic in one place] [grant.likely: Add error checking for unallocated irq_descs at associate time] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-06-18 06:17:04 +08:00
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
void irq_domain_associate_many(struct irq_domain *domain, unsigned int irq_base,
irq_hw_number_t hwirq_base, int count)
{
struct device_node *of_node;
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
int i;
of_node = irq_domain_get_of_node(domain);
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
pr_debug("%s(%s, irqbase=%i, hwbase=%i, count=%i)\n", __func__,
of_node_full_name(of_node), irq_base, (int)hwirq_base, count);
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
for (i = 0; i < count; i++) {
irq_domain_associate(domain, irq_base + i, hwirq_base + i);
}
}
irqdomain: Support for static IRQ mapping and association. This adds a new strict mapping API for supporting creation of linux IRQs at existing positions within the domain. The new routines are as follows: For dynamic allocation and insertion to specified ranges: - irq_create_identity_mapping() - irq_create_strict_mappings() These will allocate and associate a range of linux IRQs at the specified location. This can be used by controllers that have their own static linux IRQ definitions to map a hwirq range to, as well as for platforms that wish to establish 1:1 identity mapping between linux and hwirq space. For insertion to specified ranges by platforms that do their own irq_desc management: - irq_domain_associate() - irq_domain_associate_many() These in turn call back in to the domain's ->map() routine, for further processing by the platform. Disassociation of IRQs get handled through irq_dispose_mapping() as normal. With these in place it should be possible to begin migration of legacy IRQ domains to linear ones, without requiring special handling for static vs dynamic IRQ definitions in DT vs non-DT paths. This also makes it possible for domains with static mappings to adopt whichever tree model best fits their needs, rather than simply restricting them to linear revmaps. Signed-off-by: Paul Mundt <lethal@linux-sh.org> [grant.likely: Reorganized irq_domain_associate{,_many} to have all logic in one place] [grant.likely: Add error checking for unallocated irq_descs at associate time] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-06-18 06:17:04 +08:00
EXPORT_SYMBOL_GPL(irq_domain_associate_many);
/**
* irq_create_direct_mapping() - Allocate an irq for direct mapping
* @domain: domain to allocate the irq for or NULL for default domain
*
* This routine is used for irq controllers which can choose the hardware
* interrupt numbers they generate. In such a case it's simplest to use
* the linux irq as the hardware interrupt number. It still uses the linear
* or radix tree to store the mapping, but the irq controller can optimize
* the revmap path by using the hwirq directly.
*/
unsigned int irq_create_direct_mapping(struct irq_domain *domain)
{
struct device_node *of_node;
unsigned int virq;
if (domain == NULL)
domain = irq_default_domain;
of_node = irq_domain_get_of_node(domain);
virq = irq_alloc_desc_from(1, of_node_to_nid(of_node));
if (!virq) {
pr_debug("create_direct virq allocation failed\n");
return 0;
}
if (virq >= domain->revmap_direct_max_irq) {
pr_err("ERROR: no free irqs available below %i maximum\n",
domain->revmap_direct_max_irq);
irq_free_desc(virq);
return 0;
}
pr_debug("create_direct obtained virq %d\n", virq);
irqdomain: Support for static IRQ mapping and association. This adds a new strict mapping API for supporting creation of linux IRQs at existing positions within the domain. The new routines are as follows: For dynamic allocation and insertion to specified ranges: - irq_create_identity_mapping() - irq_create_strict_mappings() These will allocate and associate a range of linux IRQs at the specified location. This can be used by controllers that have their own static linux IRQ definitions to map a hwirq range to, as well as for platforms that wish to establish 1:1 identity mapping between linux and hwirq space. For insertion to specified ranges by platforms that do their own irq_desc management: - irq_domain_associate() - irq_domain_associate_many() These in turn call back in to the domain's ->map() routine, for further processing by the platform. Disassociation of IRQs get handled through irq_dispose_mapping() as normal. With these in place it should be possible to begin migration of legacy IRQ domains to linear ones, without requiring special handling for static vs dynamic IRQ definitions in DT vs non-DT paths. This also makes it possible for domains with static mappings to adopt whichever tree model best fits their needs, rather than simply restricting them to linear revmaps. Signed-off-by: Paul Mundt <lethal@linux-sh.org> [grant.likely: Reorganized irq_domain_associate{,_many} to have all logic in one place] [grant.likely: Add error checking for unallocated irq_descs at associate time] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-06-18 06:17:04 +08:00
if (irq_domain_associate(domain, virq, virq)) {
irq_free_desc(virq);
return 0;
}
return virq;
}
EXPORT_SYMBOL_GPL(irq_create_direct_mapping);
/**
* irq_create_mapping() - Map a hardware interrupt into linux irq space
* @domain: domain owning this hardware interrupt or NULL for default domain
* @hwirq: hardware irq number in that domain space
*
* Only one mapping per hardware interrupt is permitted. Returns a linux
* irq number.
* If the sense/trigger is to be specified, set_irq_type() should be called
* on the number returned from that call.
*/
unsigned int irq_create_mapping(struct irq_domain *domain,
irq_hw_number_t hwirq)
{
struct device_node *of_node;
int virq;
pr_debug("irq_create_mapping(0x%p, 0x%lx)\n", domain, hwirq);
/* Look for default domain if nececssary */
if (domain == NULL)
domain = irq_default_domain;
if (domain == NULL) {
WARN(1, "%s(, %lx) called with NULL domain\n", __func__, hwirq);
return 0;
}
pr_debug("-> using domain @%p\n", domain);
of_node = irq_domain_get_of_node(domain);
/* Check if mapping already exists */
virq = irq_find_mapping(domain, hwirq);
if (virq) {
pr_debug("-> existing mapping on virq %d\n", virq);
return virq;
}
/* Allocate a virtual interrupt number */
virq = irq_domain_alloc_descs(-1, 1, hwirq, of_node_to_nid(of_node));
if (virq <= 0) {
pr_debug("-> virq allocation failed\n");
return 0;
}
irqdomain: Support for static IRQ mapping and association. This adds a new strict mapping API for supporting creation of linux IRQs at existing positions within the domain. The new routines are as follows: For dynamic allocation and insertion to specified ranges: - irq_create_identity_mapping() - irq_create_strict_mappings() These will allocate and associate a range of linux IRQs at the specified location. This can be used by controllers that have their own static linux IRQ definitions to map a hwirq range to, as well as for platforms that wish to establish 1:1 identity mapping between linux and hwirq space. For insertion to specified ranges by platforms that do their own irq_desc management: - irq_domain_associate() - irq_domain_associate_many() These in turn call back in to the domain's ->map() routine, for further processing by the platform. Disassociation of IRQs get handled through irq_dispose_mapping() as normal. With these in place it should be possible to begin migration of legacy IRQ domains to linear ones, without requiring special handling for static vs dynamic IRQ definitions in DT vs non-DT paths. This also makes it possible for domains with static mappings to adopt whichever tree model best fits their needs, rather than simply restricting them to linear revmaps. Signed-off-by: Paul Mundt <lethal@linux-sh.org> [grant.likely: Reorganized irq_domain_associate{,_many} to have all logic in one place] [grant.likely: Add error checking for unallocated irq_descs at associate time] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-06-18 06:17:04 +08:00
if (irq_domain_associate(domain, virq, hwirq)) {
irq_free_desc(virq);
return 0;
}
pr_debug("irq %lu on domain %s mapped to virtual irq %u\n",
hwirq, of_node_full_name(of_node), virq);
return virq;
}
EXPORT_SYMBOL_GPL(irq_create_mapping);
irqdomain: Support for static IRQ mapping and association. This adds a new strict mapping API for supporting creation of linux IRQs at existing positions within the domain. The new routines are as follows: For dynamic allocation and insertion to specified ranges: - irq_create_identity_mapping() - irq_create_strict_mappings() These will allocate and associate a range of linux IRQs at the specified location. This can be used by controllers that have their own static linux IRQ definitions to map a hwirq range to, as well as for platforms that wish to establish 1:1 identity mapping between linux and hwirq space. For insertion to specified ranges by platforms that do their own irq_desc management: - irq_domain_associate() - irq_domain_associate_many() These in turn call back in to the domain's ->map() routine, for further processing by the platform. Disassociation of IRQs get handled through irq_dispose_mapping() as normal. With these in place it should be possible to begin migration of legacy IRQ domains to linear ones, without requiring special handling for static vs dynamic IRQ definitions in DT vs non-DT paths. This also makes it possible for domains with static mappings to adopt whichever tree model best fits their needs, rather than simply restricting them to linear revmaps. Signed-off-by: Paul Mundt <lethal@linux-sh.org> [grant.likely: Reorganized irq_domain_associate{,_many} to have all logic in one place] [grant.likely: Add error checking for unallocated irq_descs at associate time] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-06-18 06:17:04 +08:00
/**
* irq_create_strict_mappings() - Map a range of hw irqs to fixed linux irqs
* @domain: domain owning the interrupt range
* @irq_base: beginning of linux IRQ range
* @hwirq_base: beginning of hardware IRQ range
* @count: Number of interrupts to map
*
* This routine is used for allocating and mapping a range of hardware
* irqs to linux irqs where the linux irq numbers are at pre-defined
* locations. For use by controllers that already have static mappings
* to insert in to the domain.
*
* Non-linear users can use irq_create_identity_mapping() for IRQ-at-a-time
* domain insertion.
*
* 0 is returned upon success, while any failure to establish a static
* mapping is treated as an error.
*/
int irq_create_strict_mappings(struct irq_domain *domain, unsigned int irq_base,
irq_hw_number_t hwirq_base, int count)
{
struct device_node *of_node;
irqdomain: Support for static IRQ mapping and association. This adds a new strict mapping API for supporting creation of linux IRQs at existing positions within the domain. The new routines are as follows: For dynamic allocation and insertion to specified ranges: - irq_create_identity_mapping() - irq_create_strict_mappings() These will allocate and associate a range of linux IRQs at the specified location. This can be used by controllers that have their own static linux IRQ definitions to map a hwirq range to, as well as for platforms that wish to establish 1:1 identity mapping between linux and hwirq space. For insertion to specified ranges by platforms that do their own irq_desc management: - irq_domain_associate() - irq_domain_associate_many() These in turn call back in to the domain's ->map() routine, for further processing by the platform. Disassociation of IRQs get handled through irq_dispose_mapping() as normal. With these in place it should be possible to begin migration of legacy IRQ domains to linear ones, without requiring special handling for static vs dynamic IRQ definitions in DT vs non-DT paths. This also makes it possible for domains with static mappings to adopt whichever tree model best fits their needs, rather than simply restricting them to linear revmaps. Signed-off-by: Paul Mundt <lethal@linux-sh.org> [grant.likely: Reorganized irq_domain_associate{,_many} to have all logic in one place] [grant.likely: Add error checking for unallocated irq_descs at associate time] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-06-18 06:17:04 +08:00
int ret;
of_node = irq_domain_get_of_node(domain);
irqdomain: Support for static IRQ mapping and association. This adds a new strict mapping API for supporting creation of linux IRQs at existing positions within the domain. The new routines are as follows: For dynamic allocation and insertion to specified ranges: - irq_create_identity_mapping() - irq_create_strict_mappings() These will allocate and associate a range of linux IRQs at the specified location. This can be used by controllers that have their own static linux IRQ definitions to map a hwirq range to, as well as for platforms that wish to establish 1:1 identity mapping between linux and hwirq space. For insertion to specified ranges by platforms that do their own irq_desc management: - irq_domain_associate() - irq_domain_associate_many() These in turn call back in to the domain's ->map() routine, for further processing by the platform. Disassociation of IRQs get handled through irq_dispose_mapping() as normal. With these in place it should be possible to begin migration of legacy IRQ domains to linear ones, without requiring special handling for static vs dynamic IRQ definitions in DT vs non-DT paths. This also makes it possible for domains with static mappings to adopt whichever tree model best fits their needs, rather than simply restricting them to linear revmaps. Signed-off-by: Paul Mundt <lethal@linux-sh.org> [grant.likely: Reorganized irq_domain_associate{,_many} to have all logic in one place] [grant.likely: Add error checking for unallocated irq_descs at associate time] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-06-18 06:17:04 +08:00
ret = irq_alloc_descs(irq_base, irq_base, count,
of_node_to_nid(of_node));
irqdomain: Support for static IRQ mapping and association. This adds a new strict mapping API for supporting creation of linux IRQs at existing positions within the domain. The new routines are as follows: For dynamic allocation and insertion to specified ranges: - irq_create_identity_mapping() - irq_create_strict_mappings() These will allocate and associate a range of linux IRQs at the specified location. This can be used by controllers that have their own static linux IRQ definitions to map a hwirq range to, as well as for platforms that wish to establish 1:1 identity mapping between linux and hwirq space. For insertion to specified ranges by platforms that do their own irq_desc management: - irq_domain_associate() - irq_domain_associate_many() These in turn call back in to the domain's ->map() routine, for further processing by the platform. Disassociation of IRQs get handled through irq_dispose_mapping() as normal. With these in place it should be possible to begin migration of legacy IRQ domains to linear ones, without requiring special handling for static vs dynamic IRQ definitions in DT vs non-DT paths. This also makes it possible for domains with static mappings to adopt whichever tree model best fits their needs, rather than simply restricting them to linear revmaps. Signed-off-by: Paul Mundt <lethal@linux-sh.org> [grant.likely: Reorganized irq_domain_associate{,_many} to have all logic in one place] [grant.likely: Add error checking for unallocated irq_descs at associate time] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-06-18 06:17:04 +08:00
if (unlikely(ret < 0))
return ret;
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
irq_domain_associate_many(domain, irq_base, hwirq_base, count);
irqdomain: Support for static IRQ mapping and association. This adds a new strict mapping API for supporting creation of linux IRQs at existing positions within the domain. The new routines are as follows: For dynamic allocation and insertion to specified ranges: - irq_create_identity_mapping() - irq_create_strict_mappings() These will allocate and associate a range of linux IRQs at the specified location. This can be used by controllers that have their own static linux IRQ definitions to map a hwirq range to, as well as for platforms that wish to establish 1:1 identity mapping between linux and hwirq space. For insertion to specified ranges by platforms that do their own irq_desc management: - irq_domain_associate() - irq_domain_associate_many() These in turn call back in to the domain's ->map() routine, for further processing by the platform. Disassociation of IRQs get handled through irq_dispose_mapping() as normal. With these in place it should be possible to begin migration of legacy IRQ domains to linear ones, without requiring special handling for static vs dynamic IRQ definitions in DT vs non-DT paths. This also makes it possible for domains with static mappings to adopt whichever tree model best fits their needs, rather than simply restricting them to linear revmaps. Signed-off-by: Paul Mundt <lethal@linux-sh.org> [grant.likely: Reorganized irq_domain_associate{,_many} to have all logic in one place] [grant.likely: Add error checking for unallocated irq_descs at associate time] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-06-18 06:17:04 +08:00
return 0;
}
EXPORT_SYMBOL_GPL(irq_create_strict_mappings);
static int irq_domain_translate(struct irq_domain *d,
struct irq_fwspec *fwspec,
irq_hw_number_t *hwirq, unsigned int *type)
{
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
if (d->ops->translate)
return d->ops->translate(d, fwspec, hwirq, type);
#endif
if (d->ops->xlate)
return d->ops->xlate(d, to_of_node(fwspec->fwnode),
fwspec->param, fwspec->param_count,
hwirq, type);
/* If domain has no translation, then we assume interrupt line */
*hwirq = fwspec->param[0];
return 0;
}
static void of_phandle_args_to_fwspec(struct of_phandle_args *irq_data,
struct irq_fwspec *fwspec)
{
int i;
fwspec->fwnode = irq_data->np ? &irq_data->np->fwnode : NULL;
fwspec->param_count = irq_data->args_count;
for (i = 0; i < irq_data->args_count; i++)
fwspec->param[i] = irq_data->args[i];
}
unsigned int irq_create_fwspec_mapping(struct irq_fwspec *fwspec)
{
struct irq_domain *domain;
irq_hw_number_t hwirq;
unsigned int type = IRQ_TYPE_NONE;
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 22:20:14 +08:00
int virq;
if (fwspec->fwnode)
domain = irq_find_matching_fwnode(fwspec->fwnode, DOMAIN_BUS_ANY);
else
domain = irq_default_domain;
if (!domain) {
pr_warn("no irq domain found for %s !\n",
of_node_full_name(to_of_node(fwspec->fwnode)));
return 0;
}
if (irq_domain_translate(domain, fwspec, &hwirq, &type))
return 0;
if (irq_domain_is_hierarchy(domain)) {
/*
* If we've already configured this interrupt,
* don't do it again, or hell will break loose.
*/
virq = irq_find_mapping(domain, hwirq);
if (virq)
return virq;
virq = irq_domain_alloc_irqs(domain, 1, NUMA_NO_NODE, fwspec);
if (virq <= 0)
return 0;
} else {
/* Create mapping */
virq = irq_create_mapping(domain, hwirq);
if (!virq)
return virq;
}
/* Set type if specified and different than the current one */
if (type != IRQ_TYPE_NONE &&
type != irq_get_trigger_type(virq))
irq_set_irq_type(virq, type);
return virq;
}
EXPORT_SYMBOL_GPL(irq_create_fwspec_mapping);
unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data)
{
struct irq_fwspec fwspec;
of_phandle_args_to_fwspec(irq_data, &fwspec);
return irq_create_fwspec_mapping(&fwspec);
}
EXPORT_SYMBOL_GPL(irq_create_of_mapping);
/**
* irq_dispose_mapping() - Unmap an interrupt
* @virq: linux irq number of the interrupt to unmap
*/
void irq_dispose_mapping(unsigned int virq)
{
struct irq_data *irq_data = irq_get_irq_data(virq);
struct irq_domain *domain;
if (!virq || !irq_data)
return;
domain = irq_data->domain;
if (WARN_ON(domain == NULL))
return;
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
irq_domain_disassociate(domain, virq);
irq_free_desc(virq);
}
EXPORT_SYMBOL_GPL(irq_dispose_mapping);
/**
* irq_find_mapping() - Find a linux irq from an hw irq number.
* @domain: domain owning this hardware interrupt
* @hwirq: hardware irq number in that domain space
*/
unsigned int irq_find_mapping(struct irq_domain *domain,
irq_hw_number_t hwirq)
{
struct irq_data *data;
/* Look for default domain if nececssary */
if (domain == NULL)
domain = irq_default_domain;
if (domain == NULL)
return 0;
if (hwirq < domain->revmap_direct_max_irq) {
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 22:20:14 +08:00
data = irq_domain_get_irq_data(domain, hwirq);
if (data && data->hwirq == hwirq)
return hwirq;
}
/* Check if the hwirq is in the linear revmap. */
if (hwirq < domain->revmap_size)
return domain->linear_revmap[hwirq];
rcu_read_lock();
data = radix_tree_lookup(&domain->revmap_tree, hwirq);
rcu_read_unlock();
return data ? data->irq : 0;
}
EXPORT_SYMBOL_GPL(irq_find_mapping);
#ifdef CONFIG_IRQ_DOMAIN_DEBUG
static int virq_debug_show(struct seq_file *m, void *private)
{
unsigned long flags;
struct irq_desc *desc;
struct irq_domain *domain;
struct radix_tree_iter iter;
void *data, **slot;
int i;
seq_printf(m, " %-16s %-6s %-10s %-10s %s\n",
"name", "mapped", "linear-max", "direct-max", "devtree-node");
mutex_lock(&irq_domain_mutex);
list_for_each_entry(domain, &irq_domain_list, link) {
struct device_node *of_node;
int count = 0;
of_node = irq_domain_get_of_node(domain);
radix_tree_for_each_slot(slot, &domain->revmap_tree, &iter, 0)
count++;
seq_printf(m, "%c%-16s %6u %10u %10u %s\n",
domain == irq_default_domain ? '*' : ' ', domain->name,
domain->revmap_size + count, domain->revmap_size,
domain->revmap_direct_max_irq,
of_node ? of_node_full_name(of_node) : "");
}
mutex_unlock(&irq_domain_mutex);
seq_printf(m, "%-5s %-7s %-15s %-*s %6s %-14s %s\n", "irq", "hwirq",
"chip name", (int)(2 * sizeof(void *) + 2), "chip data",
"active", "type", "domain");
for (i = 1; i < nr_irqs; i++) {
desc = irq_to_desc(i);
if (!desc)
continue;
raw_spin_lock_irqsave(&desc->lock, flags);
domain = desc->irq_data.domain;
if (domain) {
struct irq_chip *chip;
int hwirq = desc->irq_data.hwirq;
bool direct;
seq_printf(m, "%5d ", i);
seq_printf(m, "0x%05x ", hwirq);
chip = irq_desc_get_chip(desc);
seq_printf(m, "%-15s ", (chip && chip->name) ? chip->name : "none");
data = irq_desc_get_chip_data(desc);
seq_printf(m, data ? "0x%p " : " %p ", data);
seq_printf(m, " %c ", (desc->action && desc->action->handler) ? '*' : ' ');
direct = (i == hwirq) && (i < domain->revmap_direct_max_irq);
seq_printf(m, "%6s%-8s ",
(hwirq < domain->revmap_size) ? "LINEAR" : "RADIX",
direct ? "(DIRECT)" : "");
seq_printf(m, "%s\n", desc->irq_data.domain->name);
}
raw_spin_unlock_irqrestore(&desc->lock, flags);
}
return 0;
}
static int virq_debug_open(struct inode *inode, struct file *file)
{
return single_open(file, virq_debug_show, inode->i_private);
}
static const struct file_operations virq_debug_fops = {
.open = virq_debug_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int __init irq_debugfs_init(void)
{
if (debugfs_create_file("irq_domain_mapping", S_IRUGO, NULL,
NULL, &virq_debug_fops) == NULL)
return -ENOMEM;
return 0;
}
__initcall(irq_debugfs_init);
#endif /* CONFIG_IRQ_DOMAIN_DEBUG */
/**
* irq_domain_xlate_onecell() - Generic xlate for direct one cell bindings
*
* Device Tree IRQ specifier translation function which works with one cell
* bindings where the cell value maps directly to the hwirq number.
*/
int irq_domain_xlate_onecell(struct irq_domain *d, struct device_node *ctrlr,
const u32 *intspec, unsigned int intsize,
unsigned long *out_hwirq, unsigned int *out_type)
{
if (WARN_ON(intsize < 1))
return -EINVAL;
*out_hwirq = intspec[0];
*out_type = IRQ_TYPE_NONE;
return 0;
}
EXPORT_SYMBOL_GPL(irq_domain_xlate_onecell);
/**
* irq_domain_xlate_twocell() - Generic xlate for direct two cell bindings
*
* Device Tree IRQ specifier translation function which works with two cell
* bindings where the cell values map directly to the hwirq number
* and linux irq flags.
*/
int irq_domain_xlate_twocell(struct irq_domain *d, struct device_node *ctrlr,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_type)
{
if (WARN_ON(intsize < 2))
return -EINVAL;
*out_hwirq = intspec[0];
*out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
return 0;
}
EXPORT_SYMBOL_GPL(irq_domain_xlate_twocell);
/**
* irq_domain_xlate_onetwocell() - Generic xlate for one or two cell bindings
*
* Device Tree IRQ specifier translation function which works with either one
* or two cell bindings where the cell values map directly to the hwirq number
* and linux irq flags.
*
* Note: don't use this function unless your interrupt controller explicitly
* supports both one and two cell bindings. For the majority of controllers
* the _onecell() or _twocell() variants above should be used.
*/
int irq_domain_xlate_onetwocell(struct irq_domain *d,
struct device_node *ctrlr,
const u32 *intspec, unsigned int intsize,
unsigned long *out_hwirq, unsigned int *out_type)
{
if (WARN_ON(intsize < 1))
return -EINVAL;
*out_hwirq = intspec[0];
*out_type = (intsize > 1) ? intspec[1] : IRQ_TYPE_NONE;
return 0;
}
EXPORT_SYMBOL_GPL(irq_domain_xlate_onetwocell);
const struct irq_domain_ops irq_domain_simple_ops = {
.xlate = irq_domain_xlate_onetwocell,
};
EXPORT_SYMBOL_GPL(irq_domain_simple_ops);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 22:20:14 +08:00
static int irq_domain_alloc_descs(int virq, unsigned int cnt,
irq_hw_number_t hwirq, int node)
{
unsigned int hint;
if (virq >= 0) {
virq = irq_alloc_descs(virq, virq, cnt, node);
} else {
hint = hwirq % nr_irqs;
if (hint == 0)
hint++;
virq = irq_alloc_descs_from(hint, cnt, node);
if (virq <= 0 && hint > 1)
virq = irq_alloc_descs_from(1, cnt, node);
}
return virq;
}
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
/**
* irq_domain_create_hierarchy - Add a irqdomain into the hierarchy
* @parent: Parent irq domain to associate with the new domain
* @flags: Irq domain flags associated to the domain
* @size: Size of the domain. See below
* @fwnode: Optional fwnode of the interrupt controller
* @ops: Pointer to the interrupt domain callbacks
* @host_data: Controller private data pointer
*
* If @size is 0 a tree domain is created, otherwise a linear domain.
*
* If successful the parent is associated to the new domain and the
* domain flags are set.
* Returns pointer to IRQ domain, or NULL on failure.
*/
struct irq_domain *irq_domain_create_hierarchy(struct irq_domain *parent,
unsigned int flags,
unsigned int size,
struct fwnode_handle *fwnode,
const struct irq_domain_ops *ops,
void *host_data)
{
struct irq_domain *domain;
if (size)
domain = irq_domain_create_linear(fwnode, size, ops, host_data);
else
domain = irq_domain_create_tree(fwnode, ops, host_data);
if (domain) {
domain->parent = parent;
domain->flags |= flags;
}
return domain;
}
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 22:20:14 +08:00
static void irq_domain_insert_irq(int virq)
{
struct irq_data *data;
for (data = irq_get_irq_data(virq); data; data = data->parent_data) {
struct irq_domain *domain = data->domain;
irq_hw_number_t hwirq = data->hwirq;
if (hwirq < domain->revmap_size) {
domain->linear_revmap[hwirq] = virq;
} else {
mutex_lock(&revmap_trees_mutex);
radix_tree_insert(&domain->revmap_tree, hwirq, data);
mutex_unlock(&revmap_trees_mutex);
}
/* If not already assigned, give the domain the chip's name */
if (!domain->name && data->chip)
domain->name = data->chip->name;
}
irq_clear_status_flags(virq, IRQ_NOREQUEST);
}
static void irq_domain_remove_irq(int virq)
{
struct irq_data *data;
irq_set_status_flags(virq, IRQ_NOREQUEST);
irq_set_chip_and_handler(virq, NULL, NULL);
synchronize_irq(virq);
smp_mb();
for (data = irq_get_irq_data(virq); data; data = data->parent_data) {
struct irq_domain *domain = data->domain;
irq_hw_number_t hwirq = data->hwirq;
if (hwirq < domain->revmap_size) {
domain->linear_revmap[hwirq] = 0;
} else {
mutex_lock(&revmap_trees_mutex);
radix_tree_delete(&domain->revmap_tree, hwirq);
mutex_unlock(&revmap_trees_mutex);
}
}
}
static struct irq_data *irq_domain_insert_irq_data(struct irq_domain *domain,
struct irq_data *child)
{
struct irq_data *irq_data;
irq_data = kzalloc_node(sizeof(*irq_data), GFP_KERNEL,
irq_data_get_node(child));
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 22:20:14 +08:00
if (irq_data) {
child->parent_data = irq_data;
irq_data->irq = child->irq;
irq_data->common = child->common;
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 22:20:14 +08:00
irq_data->domain = domain;
}
return irq_data;
}
static void irq_domain_free_irq_data(unsigned int virq, unsigned int nr_irqs)
{
struct irq_data *irq_data, *tmp;
int i;
for (i = 0; i < nr_irqs; i++) {
irq_data = irq_get_irq_data(virq + i);
tmp = irq_data->parent_data;
irq_data->parent_data = NULL;
irq_data->domain = NULL;
while (tmp) {
irq_data = tmp;
tmp = tmp->parent_data;
kfree(irq_data);
}
}
}
static int irq_domain_alloc_irq_data(struct irq_domain *domain,
unsigned int virq, unsigned int nr_irqs)
{
struct irq_data *irq_data;
struct irq_domain *parent;
int i;
/* The outermost irq_data is embedded in struct irq_desc */
for (i = 0; i < nr_irqs; i++) {
irq_data = irq_get_irq_data(virq + i);
irq_data->domain = domain;
for (parent = domain->parent; parent; parent = parent->parent) {
irq_data = irq_domain_insert_irq_data(parent, irq_data);
if (!irq_data) {
irq_domain_free_irq_data(virq, i + 1);
return -ENOMEM;
}
}
}
return 0;
}
/**
* irq_domain_get_irq_data - Get irq_data associated with @virq and @domain
* @domain: domain to match
* @virq: IRQ number to get irq_data
*/
struct irq_data *irq_domain_get_irq_data(struct irq_domain *domain,
unsigned int virq)
{
struct irq_data *irq_data;
for (irq_data = irq_get_irq_data(virq); irq_data;
irq_data = irq_data->parent_data)
if (irq_data->domain == domain)
return irq_data;
return NULL;
}
/**
* irq_domain_set_hwirq_and_chip - Set hwirq and irqchip of @virq at @domain
* @domain: Interrupt domain to match
* @virq: IRQ number
* @hwirq: The hwirq number
* @chip: The associated interrupt chip
* @chip_data: The associated chip data
*/
int irq_domain_set_hwirq_and_chip(struct irq_domain *domain, unsigned int virq,
irq_hw_number_t hwirq, struct irq_chip *chip,
void *chip_data)
{
struct irq_data *irq_data = irq_domain_get_irq_data(domain, virq);
if (!irq_data)
return -ENOENT;
irq_data->hwirq = hwirq;
irq_data->chip = chip ? chip : &no_irq_chip;
irq_data->chip_data = chip_data;
return 0;
}
/**
* irq_domain_set_info - Set the complete data for a @virq in @domain
* @domain: Interrupt domain to match
* @virq: IRQ number
* @hwirq: The hardware interrupt number
* @chip: The associated interrupt chip
* @chip_data: The associated interrupt chip data
* @handler: The interrupt flow handler
* @handler_data: The interrupt flow handler data
* @handler_name: The interrupt handler name
*/
void irq_domain_set_info(struct irq_domain *domain, unsigned int virq,
irq_hw_number_t hwirq, struct irq_chip *chip,
void *chip_data, irq_flow_handler_t handler,
void *handler_data, const char *handler_name)
{
irq_domain_set_hwirq_and_chip(domain, virq, hwirq, chip, chip_data);
__irq_set_handler(virq, handler, 0, handler_name);
irq_set_handler_data(virq, handler_data);
}
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 22:20:14 +08:00
/**
* irq_domain_reset_irq_data - Clear hwirq, chip and chip_data in @irq_data
* @irq_data: The pointer to irq_data
*/
void irq_domain_reset_irq_data(struct irq_data *irq_data)
{
irq_data->hwirq = 0;
irq_data->chip = &no_irq_chip;
irq_data->chip_data = NULL;
}
/**
* irq_domain_free_irqs_common - Clear irq_data and free the parent
* @domain: Interrupt domain to match
* @virq: IRQ number to start with
* @nr_irqs: The number of irqs to free
*/
void irq_domain_free_irqs_common(struct irq_domain *domain, unsigned int virq,
unsigned int nr_irqs)
{
struct irq_data *irq_data;
int i;
for (i = 0; i < nr_irqs; i++) {
irq_data = irq_domain_get_irq_data(domain, virq + i);
if (irq_data)
irq_domain_reset_irq_data(irq_data);
}
irq_domain_free_irqs_parent(domain, virq, nr_irqs);
}
/**
* irq_domain_free_irqs_top - Clear handler and handler data, clear irqdata and free parent
* @domain: Interrupt domain to match
* @virq: IRQ number to start with
* @nr_irqs: The number of irqs to free
*/
void irq_domain_free_irqs_top(struct irq_domain *domain, unsigned int virq,
unsigned int nr_irqs)
{
int i;
for (i = 0; i < nr_irqs; i++) {
irq_set_handler_data(virq + i, NULL);
irq_set_handler(virq + i, NULL);
}
irq_domain_free_irqs_common(domain, virq, nr_irqs);
}
static bool irq_domain_is_auto_recursive(struct irq_domain *domain)
{
return domain->flags & IRQ_DOMAIN_FLAG_AUTO_RECURSIVE;
}
static void irq_domain_free_irqs_recursive(struct irq_domain *domain,
unsigned int irq_base,
unsigned int nr_irqs)
{
domain->ops->free(domain, irq_base, nr_irqs);
if (irq_domain_is_auto_recursive(domain)) {
BUG_ON(!domain->parent);
irq_domain_free_irqs_recursive(domain->parent, irq_base,
nr_irqs);
}
}
static int irq_domain_alloc_irqs_recursive(struct irq_domain *domain,
unsigned int irq_base,
unsigned int nr_irqs, void *arg)
{
int ret = 0;
struct irq_domain *parent = domain->parent;
bool recursive = irq_domain_is_auto_recursive(domain);
BUG_ON(recursive && !parent);
if (recursive)
ret = irq_domain_alloc_irqs_recursive(parent, irq_base,
nr_irqs, arg);
if (ret >= 0)
ret = domain->ops->alloc(domain, irq_base, nr_irqs, arg);
if (ret < 0 && recursive)
irq_domain_free_irqs_recursive(parent, irq_base, nr_irqs);
return ret;
}
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 22:20:14 +08:00
/**
* __irq_domain_alloc_irqs - Allocate IRQs from domain
* @domain: domain to allocate from
* @irq_base: allocate specified IRQ nubmer if irq_base >= 0
* @nr_irqs: number of IRQs to allocate
* @node: NUMA node id for memory allocation
* @arg: domain specific argument
* @realloc: IRQ descriptors have already been allocated if true
*
* Allocate IRQ numbers and initialized all data structures to support
* hierarchy IRQ domains.
* Parameter @realloc is mainly to support legacy IRQs.
* Returns error code or allocated IRQ number
*
* The whole process to setup an IRQ has been split into two steps.
* The first step, __irq_domain_alloc_irqs(), is to allocate IRQ
* descriptor and required hardware resources. The second step,
* irq_domain_activate_irq(), is to program hardwares with preallocated
* resources. In this way, it's easier to rollback when failing to
* allocate resources.
*/
int __irq_domain_alloc_irqs(struct irq_domain *domain, int irq_base,
unsigned int nr_irqs, int node, void *arg,
bool realloc)
{
int i, ret, virq;
if (domain == NULL) {
domain = irq_default_domain;
if (WARN(!domain, "domain is NULL; cannot allocate IRQ\n"))
return -EINVAL;
}
if (!domain->ops->alloc) {
pr_debug("domain->ops->alloc() is NULL\n");
return -ENOSYS;
}
if (realloc && irq_base >= 0) {
virq = irq_base;
} else {
virq = irq_domain_alloc_descs(irq_base, nr_irqs, 0, node);
if (virq < 0) {
pr_debug("cannot allocate IRQ(base %d, count %d)\n",
irq_base, nr_irqs);
return virq;
}
}
if (irq_domain_alloc_irq_data(domain, virq, nr_irqs)) {
pr_debug("cannot allocate memory for IRQ%d\n", virq);
ret = -ENOMEM;
goto out_free_desc;
}
mutex_lock(&irq_domain_mutex);
ret = irq_domain_alloc_irqs_recursive(domain, virq, nr_irqs, arg);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 22:20:14 +08:00
if (ret < 0) {
mutex_unlock(&irq_domain_mutex);
goto out_free_irq_data;
}
for (i = 0; i < nr_irqs; i++)
irq_domain_insert_irq(virq + i);
mutex_unlock(&irq_domain_mutex);
return virq;
out_free_irq_data:
irq_domain_free_irq_data(virq, nr_irqs);
out_free_desc:
irq_free_descs(virq, nr_irqs);
return ret;
}
/**
* irq_domain_free_irqs - Free IRQ number and associated data structures
* @virq: base IRQ number
* @nr_irqs: number of IRQs to free
*/
void irq_domain_free_irqs(unsigned int virq, unsigned int nr_irqs)
{
struct irq_data *data = irq_get_irq_data(virq);
int i;
if (WARN(!data || !data->domain || !data->domain->ops->free,
"NULL pointer, cannot free irq\n"))
return;
mutex_lock(&irq_domain_mutex);
for (i = 0; i < nr_irqs; i++)
irq_domain_remove_irq(virq + i);
irq_domain_free_irqs_recursive(data->domain, virq, nr_irqs);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 22:20:14 +08:00
mutex_unlock(&irq_domain_mutex);
irq_domain_free_irq_data(virq, nr_irqs);
irq_free_descs(virq, nr_irqs);
}
/**
* irq_domain_alloc_irqs_parent - Allocate interrupts from parent domain
* @irq_base: Base IRQ number
* @nr_irqs: Number of IRQs to allocate
* @arg: Allocation data (arch/domain specific)
*
* Check whether the domain has been setup recursive. If not allocate
* through the parent domain.
*/
int irq_domain_alloc_irqs_parent(struct irq_domain *domain,
unsigned int irq_base, unsigned int nr_irqs,
void *arg)
{
/* irq_domain_alloc_irqs_recursive() has called parent's alloc() */
if (irq_domain_is_auto_recursive(domain))
return 0;
domain = domain->parent;
if (domain)
return irq_domain_alloc_irqs_recursive(domain, irq_base,
nr_irqs, arg);
return -ENOSYS;
}
/**
* irq_domain_free_irqs_parent - Free interrupts from parent domain
* @irq_base: Base IRQ number
* @nr_irqs: Number of IRQs to free
*
* Check whether the domain has been setup recursive. If not free
* through the parent domain.
*/
void irq_domain_free_irqs_parent(struct irq_domain *domain,
unsigned int irq_base, unsigned int nr_irqs)
{
/* irq_domain_free_irqs_recursive() will call parent's free */
if (!irq_domain_is_auto_recursive(domain) && domain->parent)
irq_domain_free_irqs_recursive(domain->parent, irq_base,
nr_irqs);
}
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 22:20:14 +08:00
/**
* irq_domain_activate_irq - Call domain_ops->activate recursively to activate
* interrupt
* @irq_data: outermost irq_data associated with interrupt
*
* This is the second step to call domain_ops->activate to program interrupt
* controllers, so the interrupt could actually get delivered.
*/
void irq_domain_activate_irq(struct irq_data *irq_data)
{
if (irq_data && irq_data->domain) {
struct irq_domain *domain = irq_data->domain;
if (irq_data->parent_data)
irq_domain_activate_irq(irq_data->parent_data);
if (domain->ops->activate)
domain->ops->activate(domain, irq_data);
}
}
/**
* irq_domain_deactivate_irq - Call domain_ops->deactivate recursively to
* deactivate interrupt
* @irq_data: outermost irq_data associated with interrupt
*
* It calls domain_ops->deactivate to program interrupt controllers to disable
* interrupt delivery.
*/
void irq_domain_deactivate_irq(struct irq_data *irq_data)
{
if (irq_data && irq_data->domain) {
struct irq_domain *domain = irq_data->domain;
if (domain->ops->deactivate)
domain->ops->deactivate(domain, irq_data);
if (irq_data->parent_data)
irq_domain_deactivate_irq(irq_data->parent_data);
}
}
static void irq_domain_check_hierarchy(struct irq_domain *domain)
{
/* Hierarchy irq_domains must implement callback alloc() */
if (domain->ops->alloc)
domain->flags |= IRQ_DOMAIN_FLAG_HIERARCHY;
}
#else /* CONFIG_IRQ_DOMAIN_HIERARCHY */
/**
* irq_domain_get_irq_data - Get irq_data associated with @virq and @domain
* @domain: domain to match
* @virq: IRQ number to get irq_data
*/
struct irq_data *irq_domain_get_irq_data(struct irq_domain *domain,
unsigned int virq)
{
struct irq_data *irq_data = irq_get_irq_data(virq);
return (irq_data && irq_data->domain == domain) ? irq_data : NULL;
}
/**
* irq_domain_set_info - Set the complete data for a @virq in @domain
* @domain: Interrupt domain to match
* @virq: IRQ number
* @hwirq: The hardware interrupt number
* @chip: The associated interrupt chip
* @chip_data: The associated interrupt chip data
* @handler: The interrupt flow handler
* @handler_data: The interrupt flow handler data
* @handler_name: The interrupt handler name
*/
void irq_domain_set_info(struct irq_domain *domain, unsigned int virq,
irq_hw_number_t hwirq, struct irq_chip *chip,
void *chip_data, irq_flow_handler_t handler,
void *handler_data, const char *handler_name)
{
irq_set_chip_and_handler_name(virq, chip, handler, handler_name);
irq_set_chip_data(virq, chip_data);
irq_set_handler_data(virq, handler_data);
}
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 22:20:14 +08:00
static void irq_domain_check_hierarchy(struct irq_domain *domain)
{
}
#endif /* CONFIG_IRQ_DOMAIN_HIERARCHY */