2019-06-04 16:11:33 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-only
|
2010-05-13 22:48:03 +08:00
|
|
|
/*
|
2013-02-13 17:51:08 +08:00
|
|
|
* Copyright (C) 2010-2013 Felix Fietkau <nbd@openwrt.org>
|
2010-05-13 22:48:03 +08:00
|
|
|
*/
|
|
|
|
#include <linux/netdevice.h>
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/skbuff.h>
|
|
|
|
#include <linux/debugfs.h>
|
|
|
|
#include <linux/random.h>
|
2014-10-21 16:38:38 +08:00
|
|
|
#include <linux/moduleparam.h>
|
2010-05-13 22:48:03 +08:00
|
|
|
#include <linux/ieee80211.h>
|
|
|
|
#include <net/mac80211.h>
|
|
|
|
#include "rate.h"
|
2016-12-15 03:46:55 +08:00
|
|
|
#include "sta_info.h"
|
2010-05-13 22:48:03 +08:00
|
|
|
#include "rc80211_minstrel.h"
|
|
|
|
#include "rc80211_minstrel_ht.h"
|
|
|
|
|
2015-03-13 17:54:44 +08:00
|
|
|
#define AVG_AMPDU_SIZE 16
|
2010-05-13 22:48:03 +08:00
|
|
|
#define AVG_PKT_SIZE 1200
|
|
|
|
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
#define SAMPLE_SWITCH_THR 100
|
|
|
|
|
2010-05-13 22:48:03 +08:00
|
|
|
/* Number of bits for an average sized packet */
|
2015-03-13 17:54:44 +08:00
|
|
|
#define MCS_NBITS ((AVG_PKT_SIZE * AVG_AMPDU_SIZE) << 3)
|
2010-05-13 22:48:03 +08:00
|
|
|
|
|
|
|
/* Number of symbols for a packet with (bps) bits per symbol */
|
2014-05-19 17:24:19 +08:00
|
|
|
#define MCS_NSYMS(bps) DIV_ROUND_UP(MCS_NBITS, (bps))
|
2010-05-13 22:48:03 +08:00
|
|
|
|
2013-03-03 04:20:12 +08:00
|
|
|
/* Transmission time (nanoseconds) for a packet containing (syms) symbols */
|
2010-05-13 22:48:03 +08:00
|
|
|
#define MCS_SYMBOL_TIME(sgi, syms) \
|
|
|
|
(sgi ? \
|
2013-03-03 04:20:12 +08:00
|
|
|
((syms) * 18000 + 4000) / 5 : /* syms * 3.6 us */ \
|
|
|
|
((syms) * 1000) << 2 /* syms * 4 us */ \
|
2010-05-13 22:48:03 +08:00
|
|
|
)
|
|
|
|
|
|
|
|
/* Transmit duration for the raw data part of an average sized packet */
|
2015-03-13 17:54:44 +08:00
|
|
|
#define MCS_DURATION(streams, sgi, bps) \
|
|
|
|
(MCS_SYMBOL_TIME(sgi, MCS_NSYMS((streams) * (bps))) / AVG_AMPDU_SIZE)
|
2010-05-13 22:48:03 +08:00
|
|
|
|
2014-10-20 21:46:00 +08:00
|
|
|
#define BW_20 0
|
|
|
|
#define BW_40 1
|
2014-10-21 16:38:38 +08:00
|
|
|
#define BW_80 2
|
2014-10-20 21:46:00 +08:00
|
|
|
|
2011-11-14 22:28:20 +08:00
|
|
|
/*
|
|
|
|
* Define group sort order: HT40 -> SGI -> #streams
|
|
|
|
*/
|
|
|
|
#define GROUP_IDX(_streams, _sgi, _ht40) \
|
2014-10-20 21:46:00 +08:00
|
|
|
MINSTREL_HT_GROUP_0 + \
|
2011-11-14 22:28:20 +08:00
|
|
|
MINSTREL_MAX_STREAMS * 2 * _ht40 + \
|
2014-10-20 21:46:00 +08:00
|
|
|
MINSTREL_MAX_STREAMS * _sgi + \
|
2011-11-14 22:28:20 +08:00
|
|
|
_streams - 1
|
|
|
|
|
2019-03-25 16:50:16 +08:00
|
|
|
#define _MAX(a, b) (((a)>(b))?(a):(b))
|
|
|
|
|
|
|
|
#define GROUP_SHIFT(duration) \
|
|
|
|
_MAX(0, 16 - __builtin_clz(duration))
|
|
|
|
|
2010-05-13 22:48:03 +08:00
|
|
|
/* MCS rate information for an MCS group */
|
2019-03-25 16:50:16 +08:00
|
|
|
#define __MCS_GROUP(_streams, _sgi, _ht40, _s) \
|
2011-11-14 22:28:20 +08:00
|
|
|
[GROUP_IDX(_streams, _sgi, _ht40)] = { \
|
2010-05-13 22:48:03 +08:00
|
|
|
.streams = _streams, \
|
2018-10-07 01:35:02 +08:00
|
|
|
.shift = _s, \
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
.bw = _ht40, \
|
2010-05-13 22:48:03 +08:00
|
|
|
.flags = \
|
2014-10-20 21:46:01 +08:00
|
|
|
IEEE80211_TX_RC_MCS | \
|
2010-05-13 22:48:03 +08:00
|
|
|
(_sgi ? IEEE80211_TX_RC_SHORT_GI : 0) | \
|
|
|
|
(_ht40 ? IEEE80211_TX_RC_40_MHZ_WIDTH : 0), \
|
|
|
|
.duration = { \
|
2018-10-07 01:35:02 +08:00
|
|
|
MCS_DURATION(_streams, _sgi, _ht40 ? 54 : 26) >> _s, \
|
|
|
|
MCS_DURATION(_streams, _sgi, _ht40 ? 108 : 52) >> _s, \
|
|
|
|
MCS_DURATION(_streams, _sgi, _ht40 ? 162 : 78) >> _s, \
|
|
|
|
MCS_DURATION(_streams, _sgi, _ht40 ? 216 : 104) >> _s, \
|
|
|
|
MCS_DURATION(_streams, _sgi, _ht40 ? 324 : 156) >> _s, \
|
|
|
|
MCS_DURATION(_streams, _sgi, _ht40 ? 432 : 208) >> _s, \
|
|
|
|
MCS_DURATION(_streams, _sgi, _ht40 ? 486 : 234) >> _s, \
|
|
|
|
MCS_DURATION(_streams, _sgi, _ht40 ? 540 : 260) >> _s \
|
2010-05-13 22:48:03 +08:00
|
|
|
} \
|
|
|
|
}
|
|
|
|
|
2019-03-25 16:50:16 +08:00
|
|
|
#define MCS_GROUP_SHIFT(_streams, _sgi, _ht40) \
|
|
|
|
GROUP_SHIFT(MCS_DURATION(_streams, _sgi, _ht40 ? 54 : 26))
|
|
|
|
|
|
|
|
#define MCS_GROUP(_streams, _sgi, _ht40) \
|
|
|
|
__MCS_GROUP(_streams, _sgi, _ht40, \
|
|
|
|
MCS_GROUP_SHIFT(_streams, _sgi, _ht40))
|
|
|
|
|
2014-10-21 16:38:38 +08:00
|
|
|
#define VHT_GROUP_IDX(_streams, _sgi, _bw) \
|
|
|
|
(MINSTREL_VHT_GROUP_0 + \
|
|
|
|
MINSTREL_MAX_STREAMS * 2 * (_bw) + \
|
|
|
|
MINSTREL_MAX_STREAMS * (_sgi) + \
|
|
|
|
(_streams) - 1)
|
|
|
|
|
|
|
|
#define BW2VBPS(_bw, r3, r2, r1) \
|
|
|
|
(_bw == BW_80 ? r3 : _bw == BW_40 ? r2 : r1)
|
|
|
|
|
2019-03-25 16:50:16 +08:00
|
|
|
#define __VHT_GROUP(_streams, _sgi, _bw, _s) \
|
2014-10-21 16:38:38 +08:00
|
|
|
[VHT_GROUP_IDX(_streams, _sgi, _bw)] = { \
|
|
|
|
.streams = _streams, \
|
2018-10-07 01:35:02 +08:00
|
|
|
.shift = _s, \
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
.bw = _bw, \
|
2014-10-21 16:38:38 +08:00
|
|
|
.flags = \
|
|
|
|
IEEE80211_TX_RC_VHT_MCS | \
|
|
|
|
(_sgi ? IEEE80211_TX_RC_SHORT_GI : 0) | \
|
|
|
|
(_bw == BW_80 ? IEEE80211_TX_RC_80_MHZ_WIDTH : \
|
|
|
|
_bw == BW_40 ? IEEE80211_TX_RC_40_MHZ_WIDTH : 0), \
|
|
|
|
.duration = { \
|
|
|
|
MCS_DURATION(_streams, _sgi, \
|
2018-10-07 01:35:02 +08:00
|
|
|
BW2VBPS(_bw, 117, 54, 26)) >> _s, \
|
2014-10-21 16:38:38 +08:00
|
|
|
MCS_DURATION(_streams, _sgi, \
|
2018-10-07 01:35:02 +08:00
|
|
|
BW2VBPS(_bw, 234, 108, 52)) >> _s, \
|
2014-10-21 16:38:38 +08:00
|
|
|
MCS_DURATION(_streams, _sgi, \
|
2018-10-07 01:35:02 +08:00
|
|
|
BW2VBPS(_bw, 351, 162, 78)) >> _s, \
|
2014-10-21 16:38:38 +08:00
|
|
|
MCS_DURATION(_streams, _sgi, \
|
2018-10-07 01:35:02 +08:00
|
|
|
BW2VBPS(_bw, 468, 216, 104)) >> _s, \
|
2014-10-21 16:38:38 +08:00
|
|
|
MCS_DURATION(_streams, _sgi, \
|
2018-10-07 01:35:02 +08:00
|
|
|
BW2VBPS(_bw, 702, 324, 156)) >> _s, \
|
2014-10-21 16:38:38 +08:00
|
|
|
MCS_DURATION(_streams, _sgi, \
|
2018-10-07 01:35:02 +08:00
|
|
|
BW2VBPS(_bw, 936, 432, 208)) >> _s, \
|
2014-10-21 16:38:38 +08:00
|
|
|
MCS_DURATION(_streams, _sgi, \
|
2018-10-07 01:35:02 +08:00
|
|
|
BW2VBPS(_bw, 1053, 486, 234)) >> _s, \
|
2014-10-21 16:38:38 +08:00
|
|
|
MCS_DURATION(_streams, _sgi, \
|
2018-10-07 01:35:02 +08:00
|
|
|
BW2VBPS(_bw, 1170, 540, 260)) >> _s, \
|
2014-10-21 16:38:38 +08:00
|
|
|
MCS_DURATION(_streams, _sgi, \
|
2018-10-07 01:35:02 +08:00
|
|
|
BW2VBPS(_bw, 1404, 648, 312)) >> _s, \
|
2014-10-21 16:38:38 +08:00
|
|
|
MCS_DURATION(_streams, _sgi, \
|
2018-10-07 01:35:02 +08:00
|
|
|
BW2VBPS(_bw, 1560, 720, 346)) >> _s \
|
2014-10-21 16:38:38 +08:00
|
|
|
} \
|
|
|
|
}
|
|
|
|
|
2019-03-25 16:50:16 +08:00
|
|
|
#define VHT_GROUP_SHIFT(_streams, _sgi, _bw) \
|
|
|
|
GROUP_SHIFT(MCS_DURATION(_streams, _sgi, \
|
|
|
|
BW2VBPS(_bw, 117, 54, 26)))
|
|
|
|
|
|
|
|
#define VHT_GROUP(_streams, _sgi, _bw) \
|
|
|
|
__VHT_GROUP(_streams, _sgi, _bw, \
|
|
|
|
VHT_GROUP_SHIFT(_streams, _sgi, _bw))
|
|
|
|
|
2013-02-13 17:51:08 +08:00
|
|
|
#define CCK_DURATION(_bitrate, _short, _len) \
|
2013-03-03 04:20:12 +08:00
|
|
|
(1000 * (10 /* SIFS */ + \
|
2013-12-18 15:44:16 +08:00
|
|
|
(_short ? 72 + 24 : 144 + 48) + \
|
2013-03-03 04:20:12 +08:00
|
|
|
(8 * (_len + 4) * 10) / (_bitrate)))
|
2013-02-13 17:51:08 +08:00
|
|
|
|
|
|
|
#define CCK_ACK_DURATION(_bitrate, _short) \
|
|
|
|
(CCK_DURATION((_bitrate > 10 ? 20 : 10), false, 60) + \
|
|
|
|
CCK_DURATION(_bitrate, _short, AVG_PKT_SIZE))
|
|
|
|
|
2018-10-07 01:35:02 +08:00
|
|
|
#define CCK_DURATION_LIST(_short, _s) \
|
|
|
|
CCK_ACK_DURATION(10, _short) >> _s, \
|
|
|
|
CCK_ACK_DURATION(20, _short) >> _s, \
|
|
|
|
CCK_ACK_DURATION(55, _short) >> _s, \
|
|
|
|
CCK_ACK_DURATION(110, _short) >> _s
|
2013-02-13 17:51:08 +08:00
|
|
|
|
2019-03-25 16:50:16 +08:00
|
|
|
#define __CCK_GROUP(_s) \
|
2014-10-20 21:46:00 +08:00
|
|
|
[MINSTREL_CCK_GROUP] = { \
|
2018-10-07 01:35:04 +08:00
|
|
|
.streams = 1, \
|
2014-10-20 21:46:01 +08:00
|
|
|
.flags = 0, \
|
2018-10-07 01:35:02 +08:00
|
|
|
.shift = _s, \
|
2014-10-20 21:46:00 +08:00
|
|
|
.duration = { \
|
2018-10-07 01:35:02 +08:00
|
|
|
CCK_DURATION_LIST(false, _s), \
|
|
|
|
CCK_DURATION_LIST(true, _s) \
|
2014-10-20 21:46:00 +08:00
|
|
|
} \
|
2013-02-13 17:51:08 +08:00
|
|
|
}
|
|
|
|
|
2019-03-25 16:50:16 +08:00
|
|
|
#define CCK_GROUP_SHIFT \
|
|
|
|
GROUP_SHIFT(CCK_ACK_DURATION(10, false))
|
|
|
|
|
|
|
|
#define CCK_GROUP __CCK_GROUP(CCK_GROUP_SHIFT)
|
|
|
|
|
|
|
|
|
2014-10-21 16:38:38 +08:00
|
|
|
static bool minstrel_vht_only = true;
|
|
|
|
module_param(minstrel_vht_only, bool, 0644);
|
|
|
|
MODULE_PARM_DESC(minstrel_vht_only,
|
|
|
|
"Use only VHT rates when VHT is supported by sta.");
|
|
|
|
|
2010-05-13 22:48:03 +08:00
|
|
|
/*
|
|
|
|
* To enable sufficiently targeted rate sampling, MCS rates are divided into
|
|
|
|
* groups, based on the number of streams and flags (HT40, SGI) that they
|
|
|
|
* use.
|
2011-11-14 22:28:20 +08:00
|
|
|
*
|
|
|
|
* Sortorder has to be fixed for GROUP_IDX macro to be applicable:
|
2014-10-20 21:46:00 +08:00
|
|
|
* BW -> SGI -> #streams
|
2010-05-13 22:48:03 +08:00
|
|
|
*/
|
|
|
|
const struct mcs_group minstrel_mcs_groups[] = {
|
2019-03-25 16:50:16 +08:00
|
|
|
MCS_GROUP(1, 0, BW_20),
|
|
|
|
MCS_GROUP(2, 0, BW_20),
|
|
|
|
MCS_GROUP(3, 0, BW_20),
|
|
|
|
MCS_GROUP(4, 0, BW_20),
|
|
|
|
|
|
|
|
MCS_GROUP(1, 1, BW_20),
|
|
|
|
MCS_GROUP(2, 1, BW_20),
|
|
|
|
MCS_GROUP(3, 1, BW_20),
|
|
|
|
MCS_GROUP(4, 1, BW_20),
|
|
|
|
|
|
|
|
MCS_GROUP(1, 0, BW_40),
|
|
|
|
MCS_GROUP(2, 0, BW_40),
|
|
|
|
MCS_GROUP(3, 0, BW_40),
|
|
|
|
MCS_GROUP(4, 0, BW_40),
|
|
|
|
|
|
|
|
MCS_GROUP(1, 1, BW_40),
|
|
|
|
MCS_GROUP(2, 1, BW_40),
|
|
|
|
MCS_GROUP(3, 1, BW_40),
|
|
|
|
MCS_GROUP(4, 1, BW_40),
|
|
|
|
|
|
|
|
CCK_GROUP,
|
|
|
|
|
|
|
|
VHT_GROUP(1, 0, BW_20),
|
|
|
|
VHT_GROUP(2, 0, BW_20),
|
|
|
|
VHT_GROUP(3, 0, BW_20),
|
|
|
|
VHT_GROUP(4, 0, BW_20),
|
|
|
|
|
|
|
|
VHT_GROUP(1, 1, BW_20),
|
|
|
|
VHT_GROUP(2, 1, BW_20),
|
|
|
|
VHT_GROUP(3, 1, BW_20),
|
|
|
|
VHT_GROUP(4, 1, BW_20),
|
|
|
|
|
|
|
|
VHT_GROUP(1, 0, BW_40),
|
|
|
|
VHT_GROUP(2, 0, BW_40),
|
|
|
|
VHT_GROUP(3, 0, BW_40),
|
|
|
|
VHT_GROUP(4, 0, BW_40),
|
|
|
|
|
|
|
|
VHT_GROUP(1, 1, BW_40),
|
|
|
|
VHT_GROUP(2, 1, BW_40),
|
|
|
|
VHT_GROUP(3, 1, BW_40),
|
|
|
|
VHT_GROUP(4, 1, BW_40),
|
|
|
|
|
|
|
|
VHT_GROUP(1, 0, BW_80),
|
|
|
|
VHT_GROUP(2, 0, BW_80),
|
|
|
|
VHT_GROUP(3, 0, BW_80),
|
|
|
|
VHT_GROUP(4, 0, BW_80),
|
|
|
|
|
|
|
|
VHT_GROUP(1, 1, BW_80),
|
|
|
|
VHT_GROUP(2, 1, BW_80),
|
|
|
|
VHT_GROUP(3, 1, BW_80),
|
|
|
|
VHT_GROUP(4, 1, BW_80),
|
2014-10-21 16:38:38 +08:00
|
|
|
};
|
2013-02-13 17:51:08 +08:00
|
|
|
|
2014-01-21 07:32:52 +08:00
|
|
|
static u8 sample_table[SAMPLE_COLUMNS][MCS_GROUP_RATES] __read_mostly;
|
2010-05-13 22:48:03 +08:00
|
|
|
|
2013-04-22 22:14:42 +08:00
|
|
|
static void
|
|
|
|
minstrel_ht_update_rates(struct minstrel_priv *mp, struct minstrel_ht_sta *mi);
|
|
|
|
|
2014-10-21 16:38:38 +08:00
|
|
|
/*
|
|
|
|
* Some VHT MCSes are invalid (when Ndbps / Nes is not an integer)
|
|
|
|
* e.g for MCS9@20MHzx1Nss: Ndbps=8x52*(5/6) Nes=1
|
|
|
|
*
|
|
|
|
* Returns the valid mcs map for struct minstrel_mcs_group_data.supported
|
|
|
|
*/
|
|
|
|
static u16
|
|
|
|
minstrel_get_valid_vht_rates(int bw, int nss, __le16 mcs_map)
|
|
|
|
{
|
|
|
|
u16 mask = 0;
|
|
|
|
|
|
|
|
if (bw == BW_20) {
|
|
|
|
if (nss != 3 && nss != 6)
|
|
|
|
mask = BIT(9);
|
|
|
|
} else if (bw == BW_80) {
|
|
|
|
if (nss == 3 || nss == 7)
|
|
|
|
mask = BIT(6);
|
|
|
|
else if (nss == 6)
|
|
|
|
mask = BIT(9);
|
|
|
|
} else {
|
|
|
|
WARN_ON(bw != BW_40);
|
|
|
|
}
|
|
|
|
|
|
|
|
switch ((le16_to_cpu(mcs_map) >> (2 * (nss - 1))) & 3) {
|
|
|
|
case IEEE80211_VHT_MCS_SUPPORT_0_7:
|
|
|
|
mask |= 0x300;
|
|
|
|
break;
|
|
|
|
case IEEE80211_VHT_MCS_SUPPORT_0_8:
|
|
|
|
mask |= 0x200;
|
|
|
|
break;
|
|
|
|
case IEEE80211_VHT_MCS_SUPPORT_0_9:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
mask = 0x3ff;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0x3ff & ~mask;
|
|
|
|
}
|
|
|
|
|
2010-05-13 22:48:03 +08:00
|
|
|
/*
|
|
|
|
* Look up an MCS group index based on mac80211 rate information
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
minstrel_ht_get_group_idx(struct ieee80211_tx_rate *rate)
|
|
|
|
{
|
2014-09-29 08:36:30 +08:00
|
|
|
return GROUP_IDX((rate->idx / 8) + 1,
|
2011-11-14 22:28:20 +08:00
|
|
|
!!(rate->flags & IEEE80211_TX_RC_SHORT_GI),
|
|
|
|
!!(rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH));
|
2010-05-13 22:48:03 +08:00
|
|
|
}
|
|
|
|
|
2014-10-21 16:38:38 +08:00
|
|
|
static int
|
|
|
|
minstrel_vht_get_group_idx(struct ieee80211_tx_rate *rate)
|
|
|
|
{
|
|
|
|
return VHT_GROUP_IDX(ieee80211_rate_get_vht_nss(rate),
|
|
|
|
!!(rate->flags & IEEE80211_TX_RC_SHORT_GI),
|
|
|
|
!!(rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) +
|
|
|
|
2*!!(rate->flags & IEEE80211_TX_RC_80_MHZ_WIDTH));
|
|
|
|
}
|
|
|
|
|
2013-02-13 17:51:08 +08:00
|
|
|
static struct minstrel_rate_stats *
|
|
|
|
minstrel_ht_get_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi,
|
|
|
|
struct ieee80211_tx_rate *rate)
|
|
|
|
{
|
|
|
|
int group, idx;
|
|
|
|
|
|
|
|
if (rate->flags & IEEE80211_TX_RC_MCS) {
|
|
|
|
group = minstrel_ht_get_group_idx(rate);
|
2013-11-11 20:12:55 +08:00
|
|
|
idx = rate->idx % 8;
|
2014-10-21 16:38:38 +08:00
|
|
|
} else if (rate->flags & IEEE80211_TX_RC_VHT_MCS) {
|
|
|
|
group = minstrel_vht_get_group_idx(rate);
|
|
|
|
idx = ieee80211_rate_get_vht_mcs(rate);
|
2013-02-13 17:51:08 +08:00
|
|
|
} else {
|
|
|
|
group = MINSTREL_CCK_GROUP;
|
|
|
|
|
|
|
|
for (idx = 0; idx < ARRAY_SIZE(mp->cck_rates); idx++)
|
|
|
|
if (rate->idx == mp->cck_rates[idx])
|
|
|
|
break;
|
|
|
|
|
|
|
|
/* short preamble */
|
2018-10-07 01:35:05 +08:00
|
|
|
if ((mi->supported[group] & BIT(idx + 4)) &&
|
|
|
|
(rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE))
|
2013-02-13 17:51:08 +08:00
|
|
|
idx += 4;
|
|
|
|
}
|
|
|
|
return &mi->groups[group].rates[idx];
|
|
|
|
}
|
|
|
|
|
2010-05-13 22:48:03 +08:00
|
|
|
static inline struct minstrel_rate_stats *
|
|
|
|
minstrel_get_ratestats(struct minstrel_ht_sta *mi, int index)
|
|
|
|
{
|
|
|
|
return &mi->groups[index / MCS_GROUP_RATES].rates[index % MCS_GROUP_RATES];
|
|
|
|
}
|
|
|
|
|
2019-01-17 05:32:12 +08:00
|
|
|
static unsigned int
|
|
|
|
minstrel_ht_avg_ampdu_len(struct minstrel_ht_sta *mi)
|
|
|
|
{
|
|
|
|
if (!mi->avg_ampdu_len)
|
|
|
|
return AVG_AMPDU_SIZE;
|
|
|
|
|
|
|
|
return MINSTREL_TRUNC(mi->avg_ampdu_len);
|
|
|
|
}
|
|
|
|
|
2010-05-13 22:48:03 +08:00
|
|
|
/*
|
2015-03-25 04:09:40 +08:00
|
|
|
* Return current throughput based on the average A-MPDU length, taking into
|
|
|
|
* account the expected number of retransmissions and their expected length
|
2010-05-13 22:48:03 +08:00
|
|
|
*/
|
2015-03-25 04:09:40 +08:00
|
|
|
int
|
2015-03-25 04:09:41 +08:00
|
|
|
minstrel_ht_get_tp_avg(struct minstrel_ht_sta *mi, int group, int rate,
|
|
|
|
int prob_ewma)
|
2010-05-13 22:48:03 +08:00
|
|
|
{
|
2013-03-03 04:20:12 +08:00
|
|
|
unsigned int nsecs = 0;
|
2010-05-13 22:48:03 +08:00
|
|
|
|
2015-03-25 04:09:39 +08:00
|
|
|
/* do not account throughput if sucess prob is below 10% */
|
2015-03-25 04:09:41 +08:00
|
|
|
if (prob_ewma < MINSTREL_FRAC(10, 100))
|
2015-03-25 04:09:40 +08:00
|
|
|
return 0;
|
2010-05-13 22:48:03 +08:00
|
|
|
|
2013-02-13 17:51:08 +08:00
|
|
|
if (group != MINSTREL_CCK_GROUP)
|
2019-01-17 05:32:12 +08:00
|
|
|
nsecs = 1000 * mi->overhead / minstrel_ht_avg_ampdu_len(mi);
|
2013-02-13 17:51:08 +08:00
|
|
|
|
2018-10-07 01:35:02 +08:00
|
|
|
nsecs += minstrel_mcs_groups[group].duration[rate] <<
|
|
|
|
minstrel_mcs_groups[group].shift;
|
2013-03-03 04:20:12 +08:00
|
|
|
|
2015-03-25 04:09:41 +08:00
|
|
|
/*
|
|
|
|
* For the throughput calculation, limit the probability value to 90% to
|
|
|
|
* account for collision related packet error rate fluctuation
|
|
|
|
* (prob is scaled - see MINSTREL_FRAC above)
|
|
|
|
*/
|
|
|
|
if (prob_ewma > MINSTREL_FRAC(90, 100))
|
|
|
|
return MINSTREL_TRUNC(100000 * ((MINSTREL_FRAC(90, 100) * 1000)
|
|
|
|
/ nsecs));
|
|
|
|
else
|
|
|
|
return MINSTREL_TRUNC(100000 * ((prob_ewma * 1000) / nsecs));
|
2010-05-13 22:48:03 +08:00
|
|
|
}
|
|
|
|
|
2014-09-10 05:22:14 +08:00
|
|
|
/*
|
|
|
|
* Find & sort topmost throughput rates
|
|
|
|
*
|
|
|
|
* If multiple rates provide equal throughput the sorting is based on their
|
|
|
|
* current success probability. Higher success probability is preferred among
|
|
|
|
* MCS groups, CCK rates do not provide aggregation and are therefore at last.
|
|
|
|
*/
|
|
|
|
static void
|
2014-10-20 21:45:59 +08:00
|
|
|
minstrel_ht_sort_best_tp_rates(struct minstrel_ht_sta *mi, u16 index,
|
|
|
|
u16 *tp_list)
|
2014-09-10 05:22:14 +08:00
|
|
|
{
|
2015-03-25 04:09:40 +08:00
|
|
|
int cur_group, cur_idx, cur_tp_avg, cur_prob;
|
|
|
|
int tmp_group, tmp_idx, tmp_tp_avg, tmp_prob;
|
2014-09-10 05:22:14 +08:00
|
|
|
int j = MAX_THR_RATES;
|
|
|
|
|
|
|
|
cur_group = index / MCS_GROUP_RATES;
|
|
|
|
cur_idx = index % MCS_GROUP_RATES;
|
2015-03-25 04:09:39 +08:00
|
|
|
cur_prob = mi->groups[cur_group].rates[cur_idx].prob_ewma;
|
2015-03-25 04:09:41 +08:00
|
|
|
cur_tp_avg = minstrel_ht_get_tp_avg(mi, cur_group, cur_idx, cur_prob);
|
2014-09-10 05:22:14 +08:00
|
|
|
|
2014-11-19 05:35:31 +08:00
|
|
|
do {
|
2014-09-10 05:22:14 +08:00
|
|
|
tmp_group = tp_list[j - 1] / MCS_GROUP_RATES;
|
|
|
|
tmp_idx = tp_list[j - 1] % MCS_GROUP_RATES;
|
2015-03-25 04:09:39 +08:00
|
|
|
tmp_prob = mi->groups[tmp_group].rates[tmp_idx].prob_ewma;
|
2015-03-25 04:09:41 +08:00
|
|
|
tmp_tp_avg = minstrel_ht_get_tp_avg(mi, tmp_group, tmp_idx,
|
|
|
|
tmp_prob);
|
2015-03-25 04:09:40 +08:00
|
|
|
if (cur_tp_avg < tmp_tp_avg ||
|
|
|
|
(cur_tp_avg == tmp_tp_avg && cur_prob <= tmp_prob))
|
2014-11-19 05:35:31 +08:00
|
|
|
break;
|
|
|
|
j--;
|
|
|
|
} while (j > 0);
|
2014-09-10 05:22:14 +08:00
|
|
|
|
|
|
|
if (j < MAX_THR_RATES - 1) {
|
|
|
|
memmove(&tp_list[j + 1], &tp_list[j], (sizeof(*tp_list) *
|
|
|
|
(MAX_THR_RATES - (j + 1))));
|
|
|
|
}
|
|
|
|
if (j < MAX_THR_RATES)
|
|
|
|
tp_list[j] = index;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Find and set the topmost probability rate per sta and per group
|
|
|
|
*/
|
|
|
|
static void
|
2014-10-20 21:45:59 +08:00
|
|
|
minstrel_ht_set_best_prob_rate(struct minstrel_ht_sta *mi, u16 index)
|
2014-09-10 05:22:14 +08:00
|
|
|
{
|
|
|
|
struct minstrel_mcs_group_data *mg;
|
2015-03-25 04:09:39 +08:00
|
|
|
struct minstrel_rate_stats *mrs;
|
2015-03-25 04:09:40 +08:00
|
|
|
int tmp_group, tmp_idx, tmp_tp_avg, tmp_prob;
|
|
|
|
int max_tp_group, cur_tp_avg, cur_group, cur_idx;
|
2015-03-25 04:09:41 +08:00
|
|
|
int max_gpr_group, max_gpr_idx;
|
|
|
|
int max_gpr_tp_avg, max_gpr_prob;
|
2014-09-10 05:22:14 +08:00
|
|
|
|
2015-03-25 04:09:40 +08:00
|
|
|
cur_group = index / MCS_GROUP_RATES;
|
|
|
|
cur_idx = index % MCS_GROUP_RATES;
|
2014-09-10 05:22:14 +08:00
|
|
|
mg = &mi->groups[index / MCS_GROUP_RATES];
|
2015-03-25 04:09:39 +08:00
|
|
|
mrs = &mg->rates[index % MCS_GROUP_RATES];
|
2014-09-10 05:22:14 +08:00
|
|
|
|
|
|
|
tmp_group = mi->max_prob_rate / MCS_GROUP_RATES;
|
|
|
|
tmp_idx = mi->max_prob_rate % MCS_GROUP_RATES;
|
2015-03-25 04:09:39 +08:00
|
|
|
tmp_prob = mi->groups[tmp_group].rates[tmp_idx].prob_ewma;
|
2015-03-25 04:09:41 +08:00
|
|
|
tmp_tp_avg = minstrel_ht_get_tp_avg(mi, tmp_group, tmp_idx, tmp_prob);
|
2014-09-10 05:22:14 +08:00
|
|
|
|
|
|
|
/* if max_tp_rate[0] is from MCS_GROUP max_prob_rate get selected from
|
|
|
|
* MCS_GROUP as well as CCK_GROUP rates do not allow aggregation */
|
|
|
|
max_tp_group = mi->max_tp_rate[0] / MCS_GROUP_RATES;
|
|
|
|
if((index / MCS_GROUP_RATES == MINSTREL_CCK_GROUP) &&
|
|
|
|
(max_tp_group != MINSTREL_CCK_GROUP))
|
|
|
|
return;
|
|
|
|
|
2016-01-29 16:35:12 +08:00
|
|
|
max_gpr_group = mg->max_group_prob_rate / MCS_GROUP_RATES;
|
|
|
|
max_gpr_idx = mg->max_group_prob_rate % MCS_GROUP_RATES;
|
|
|
|
max_gpr_prob = mi->groups[max_gpr_group].rates[max_gpr_idx].prob_ewma;
|
|
|
|
|
2015-03-25 04:09:39 +08:00
|
|
|
if (mrs->prob_ewma > MINSTREL_FRAC(75, 100)) {
|
2015-03-25 04:09:41 +08:00
|
|
|
cur_tp_avg = minstrel_ht_get_tp_avg(mi, cur_group, cur_idx,
|
|
|
|
mrs->prob_ewma);
|
2015-03-25 04:09:40 +08:00
|
|
|
if (cur_tp_avg > tmp_tp_avg)
|
2014-09-10 05:22:14 +08:00
|
|
|
mi->max_prob_rate = index;
|
2015-03-25 04:09:40 +08:00
|
|
|
|
2015-03-25 04:09:41 +08:00
|
|
|
max_gpr_tp_avg = minstrel_ht_get_tp_avg(mi, max_gpr_group,
|
|
|
|
max_gpr_idx,
|
|
|
|
max_gpr_prob);
|
|
|
|
if (cur_tp_avg > max_gpr_tp_avg)
|
2014-09-10 05:22:14 +08:00
|
|
|
mg->max_group_prob_rate = index;
|
|
|
|
} else {
|
2015-03-25 04:09:39 +08:00
|
|
|
if (mrs->prob_ewma > tmp_prob)
|
2014-09-10 05:22:14 +08:00
|
|
|
mi->max_prob_rate = index;
|
2016-01-29 16:35:12 +08:00
|
|
|
if (mrs->prob_ewma > max_gpr_prob)
|
2014-09-10 05:22:14 +08:00
|
|
|
mg->max_group_prob_rate = index;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Assign new rate set per sta and use CCK rates only if the fastest
|
|
|
|
* rate (max_tp_rate[0]) is from CCK group. This prohibits such sorted
|
|
|
|
* rate sets where MCS and CCK rates are mixed, because CCK rates can
|
|
|
|
* not use aggregation.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
minstrel_ht_assign_best_tp_rates(struct minstrel_ht_sta *mi,
|
2014-10-20 21:45:59 +08:00
|
|
|
u16 tmp_mcs_tp_rate[MAX_THR_RATES],
|
|
|
|
u16 tmp_cck_tp_rate[MAX_THR_RATES])
|
2014-09-10 05:22:14 +08:00
|
|
|
{
|
2015-03-25 04:09:41 +08:00
|
|
|
unsigned int tmp_group, tmp_idx, tmp_cck_tp, tmp_mcs_tp, tmp_prob;
|
2014-09-10 05:22:14 +08:00
|
|
|
int i;
|
|
|
|
|
|
|
|
tmp_group = tmp_cck_tp_rate[0] / MCS_GROUP_RATES;
|
|
|
|
tmp_idx = tmp_cck_tp_rate[0] % MCS_GROUP_RATES;
|
2015-03-25 04:09:41 +08:00
|
|
|
tmp_prob = mi->groups[tmp_group].rates[tmp_idx].prob_ewma;
|
|
|
|
tmp_cck_tp = minstrel_ht_get_tp_avg(mi, tmp_group, tmp_idx, tmp_prob);
|
2014-09-10 05:22:14 +08:00
|
|
|
|
|
|
|
tmp_group = tmp_mcs_tp_rate[0] / MCS_GROUP_RATES;
|
|
|
|
tmp_idx = tmp_mcs_tp_rate[0] % MCS_GROUP_RATES;
|
2015-03-25 04:09:41 +08:00
|
|
|
tmp_prob = mi->groups[tmp_group].rates[tmp_idx].prob_ewma;
|
|
|
|
tmp_mcs_tp = minstrel_ht_get_tp_avg(mi, tmp_group, tmp_idx, tmp_prob);
|
2014-09-10 05:22:14 +08:00
|
|
|
|
2019-08-20 17:54:48 +08:00
|
|
|
if (tmp_cck_tp_rate && tmp_cck_tp > tmp_mcs_tp) {
|
2014-09-10 05:22:14 +08:00
|
|
|
for(i = 0; i < MAX_THR_RATES; i++) {
|
|
|
|
minstrel_ht_sort_best_tp_rates(mi, tmp_cck_tp_rate[i],
|
|
|
|
tmp_mcs_tp_rate);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Try to increase robustness of max_prob rate by decrease number of
|
|
|
|
* streams if possible.
|
|
|
|
*/
|
|
|
|
static inline void
|
|
|
|
minstrel_ht_prob_rate_reduce_streams(struct minstrel_ht_sta *mi)
|
|
|
|
{
|
|
|
|
struct minstrel_mcs_group_data *mg;
|
2015-03-25 04:09:41 +08:00
|
|
|
int tmp_max_streams, group, tmp_idx, tmp_prob;
|
2014-09-10 05:22:14 +08:00
|
|
|
int tmp_tp = 0;
|
|
|
|
|
|
|
|
tmp_max_streams = minstrel_mcs_groups[mi->max_tp_rate[0] /
|
|
|
|
MCS_GROUP_RATES].streams;
|
|
|
|
for (group = 0; group < ARRAY_SIZE(minstrel_mcs_groups); group++) {
|
|
|
|
mg = &mi->groups[group];
|
2016-12-15 03:46:54 +08:00
|
|
|
if (!mi->supported[group] || group == MINSTREL_CCK_GROUP)
|
2014-09-10 05:22:14 +08:00
|
|
|
continue;
|
2015-03-25 04:09:40 +08:00
|
|
|
|
|
|
|
tmp_idx = mg->max_group_prob_rate % MCS_GROUP_RATES;
|
2015-03-25 04:09:41 +08:00
|
|
|
tmp_prob = mi->groups[group].rates[tmp_idx].prob_ewma;
|
2015-03-25 04:09:40 +08:00
|
|
|
|
2015-03-25 04:09:41 +08:00
|
|
|
if (tmp_tp < minstrel_ht_get_tp_avg(mi, group, tmp_idx, tmp_prob) &&
|
2014-09-10 05:22:14 +08:00
|
|
|
(minstrel_mcs_groups[group].streams < tmp_max_streams)) {
|
|
|
|
mi->max_prob_rate = mg->max_group_prob_rate;
|
2015-03-25 04:09:40 +08:00
|
|
|
tmp_tp = minstrel_ht_get_tp_avg(mi, group,
|
2015-03-25 04:09:41 +08:00
|
|
|
tmp_idx,
|
|
|
|
tmp_prob);
|
2014-09-10 05:22:14 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
static inline int
|
|
|
|
minstrel_get_duration(int index)
|
|
|
|
{
|
|
|
|
const struct mcs_group *group = &minstrel_mcs_groups[index / MCS_GROUP_RATES];
|
|
|
|
unsigned int duration = group->duration[index % MCS_GROUP_RATES];
|
|
|
|
return duration << group->shift;
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool
|
|
|
|
minstrel_ht_probe_group(struct minstrel_ht_sta *mi, const struct mcs_group *tp_group,
|
|
|
|
int tp_idx, const struct mcs_group *group)
|
|
|
|
{
|
|
|
|
if (group->bw < tp_group->bw)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
if (group->streams == tp_group->streams)
|
|
|
|
return true;
|
|
|
|
|
|
|
|
if (tp_idx < 4 && group->streams == tp_group->streams - 1)
|
|
|
|
return true;
|
|
|
|
|
|
|
|
return group->streams == tp_group->streams + 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
minstrel_ht_find_probe_rates(struct minstrel_ht_sta *mi, u16 *rates, int *n_rates,
|
|
|
|
bool faster_rate)
|
|
|
|
{
|
|
|
|
const struct mcs_group *group, *tp_group;
|
|
|
|
int i, g, max_dur;
|
|
|
|
int tp_idx;
|
|
|
|
|
|
|
|
tp_group = &minstrel_mcs_groups[mi->max_tp_rate[0] / MCS_GROUP_RATES];
|
|
|
|
tp_idx = mi->max_tp_rate[0] % MCS_GROUP_RATES;
|
|
|
|
|
|
|
|
max_dur = minstrel_get_duration(mi->max_tp_rate[0]);
|
|
|
|
if (faster_rate)
|
|
|
|
max_dur -= max_dur / 16;
|
|
|
|
|
|
|
|
for (g = 0; g < MINSTREL_GROUPS_NB; g++) {
|
|
|
|
u16 supported = mi->supported[g];
|
|
|
|
|
|
|
|
if (!supported)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
group = &minstrel_mcs_groups[g];
|
|
|
|
if (!minstrel_ht_probe_group(mi, tp_group, tp_idx, group))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
for (i = 0; supported; supported >>= 1, i++) {
|
|
|
|
int idx;
|
|
|
|
|
|
|
|
if (!(supported & 1))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if ((group->duration[i] << group->shift) > max_dur)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
idx = g * MCS_GROUP_RATES + i;
|
|
|
|
if (idx == mi->max_tp_rate[0])
|
|
|
|
continue;
|
|
|
|
|
|
|
|
rates[(*n_rates)++] = idx;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
minstrel_ht_rate_sample_switch(struct minstrel_priv *mp,
|
|
|
|
struct minstrel_ht_sta *mi)
|
|
|
|
{
|
|
|
|
struct minstrel_rate_stats *mrs;
|
|
|
|
u16 rates[MINSTREL_GROUPS_NB];
|
|
|
|
int n_rates = 0;
|
|
|
|
int probe_rate = 0;
|
|
|
|
bool faster_rate;
|
|
|
|
int i;
|
|
|
|
u8 random;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Use rate switching instead of probing packets for devices with
|
|
|
|
* little control over retry fallback behavior
|
|
|
|
*/
|
|
|
|
if (mp->hw->max_rates > 1)
|
|
|
|
return;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If the current EWMA prob is >75%, look for a rate that's 6.25%
|
|
|
|
* faster than the max tp rate.
|
|
|
|
* If that fails, look again for a rate that is at least as fast
|
|
|
|
*/
|
|
|
|
mrs = minstrel_get_ratestats(mi, mi->max_tp_rate[0]);
|
|
|
|
faster_rate = mrs->prob_ewma > MINSTREL_FRAC(75, 100);
|
|
|
|
minstrel_ht_find_probe_rates(mi, rates, &n_rates, faster_rate);
|
|
|
|
if (!n_rates && faster_rate)
|
|
|
|
minstrel_ht_find_probe_rates(mi, rates, &n_rates, false);
|
|
|
|
|
|
|
|
/* If no suitable rate was found, try to pick the next one in the group */
|
|
|
|
if (!n_rates) {
|
|
|
|
int g_idx = mi->max_tp_rate[0] / MCS_GROUP_RATES;
|
|
|
|
u16 supported = mi->supported[g_idx];
|
|
|
|
|
|
|
|
supported >>= mi->max_tp_rate[0] % MCS_GROUP_RATES;
|
2019-08-22 20:20:34 +08:00
|
|
|
for (i = 0; supported; supported >>= 1, i++) {
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
if (!(supported & 1))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
probe_rate = mi->max_tp_rate[0] + i;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
i = 0;
|
|
|
|
if (n_rates > 1) {
|
|
|
|
random = prandom_u32();
|
|
|
|
i = random % n_rates;
|
|
|
|
}
|
|
|
|
probe_rate = rates[i];
|
|
|
|
|
|
|
|
out:
|
|
|
|
mi->sample_rate = probe_rate;
|
|
|
|
mi->sample_mode = MINSTREL_SAMPLE_ACTIVE;
|
|
|
|
}
|
|
|
|
|
2010-05-13 22:48:03 +08:00
|
|
|
/*
|
|
|
|
* Update rate statistics and select new primary rates
|
|
|
|
*
|
|
|
|
* Rules for rate selection:
|
|
|
|
* - max_prob_rate must use only one stream, as a tradeoff between delivery
|
|
|
|
* probability and throughput during strong fluctuations
|
2014-09-10 05:22:14 +08:00
|
|
|
* - as long as the max prob rate has a probability of more than 75%, pick
|
2010-05-13 22:48:03 +08:00
|
|
|
* higher throughput rates, even if the probablity is a bit lower
|
|
|
|
*/
|
|
|
|
static void
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
minstrel_ht_update_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi,
|
|
|
|
bool sample)
|
2010-05-13 22:48:03 +08:00
|
|
|
{
|
|
|
|
struct minstrel_mcs_group_data *mg;
|
2015-03-25 04:09:39 +08:00
|
|
|
struct minstrel_rate_stats *mrs;
|
2015-03-25 04:09:41 +08:00
|
|
|
int group, i, j, cur_prob;
|
2014-10-20 21:45:59 +08:00
|
|
|
u16 tmp_mcs_tp_rate[MAX_THR_RATES], tmp_group_tp_rate[MAX_THR_RATES];
|
|
|
|
u16 tmp_cck_tp_rate[MAX_THR_RATES], index;
|
2010-05-13 22:48:03 +08:00
|
|
|
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
mi->sample_mode = MINSTREL_SAMPLE_IDLE;
|
|
|
|
|
|
|
|
if (sample) {
|
|
|
|
mi->total_packets_cur = mi->total_packets -
|
|
|
|
mi->total_packets_last;
|
|
|
|
mi->total_packets_last = mi->total_packets;
|
|
|
|
}
|
|
|
|
if (!mp->sample_switch)
|
|
|
|
sample = false;
|
|
|
|
if (mi->total_packets_cur < SAMPLE_SWITCH_THR && mp->sample_switch != 1)
|
|
|
|
sample = false;
|
|
|
|
|
2010-05-13 22:48:03 +08:00
|
|
|
if (mi->ampdu_packets > 0) {
|
2019-01-17 05:32:12 +08:00
|
|
|
if (!ieee80211_hw_check(mp->hw, TX_STATUS_NO_AMPDU_LEN))
|
|
|
|
mi->avg_ampdu_len = minstrel_ewma(mi->avg_ampdu_len,
|
|
|
|
MINSTREL_FRAC(mi->ampdu_len, mi->ampdu_packets),
|
|
|
|
EWMA_LEVEL);
|
|
|
|
else
|
|
|
|
mi->avg_ampdu_len = 0;
|
2010-05-13 22:48:03 +08:00
|
|
|
mi->ampdu_len = 0;
|
|
|
|
mi->ampdu_packets = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
mi->sample_slow = 0;
|
|
|
|
mi->sample_count = 0;
|
|
|
|
|
2019-08-20 17:54:48 +08:00
|
|
|
memset(tmp_mcs_tp_rate, 0, sizeof(tmp_mcs_tp_rate));
|
|
|
|
memset(tmp_cck_tp_rate, 0, sizeof(tmp_cck_tp_rate));
|
|
|
|
if (mi->supported[MINSTREL_CCK_GROUP])
|
|
|
|
for (j = 0; j < ARRAY_SIZE(tmp_cck_tp_rate); j++)
|
|
|
|
tmp_cck_tp_rate[j] = MINSTREL_CCK_GROUP * MCS_GROUP_RATES;
|
|
|
|
|
|
|
|
if (mi->supported[MINSTREL_VHT_GROUP_0])
|
|
|
|
index = MINSTREL_VHT_GROUP_0 * MCS_GROUP_RATES;
|
|
|
|
else
|
|
|
|
index = MINSTREL_HT_GROUP_0 * MCS_GROUP_RATES;
|
|
|
|
|
|
|
|
for (j = 0; j < ARRAY_SIZE(tmp_mcs_tp_rate); j++)
|
|
|
|
tmp_mcs_tp_rate[j] = index;
|
2013-04-18 20:26:20 +08:00
|
|
|
|
2014-09-10 05:22:14 +08:00
|
|
|
/* Find best rate sets within all MCS groups*/
|
|
|
|
for (group = 0; group < ARRAY_SIZE(minstrel_mcs_groups); group++) {
|
2010-05-13 22:48:03 +08:00
|
|
|
|
|
|
|
mg = &mi->groups[group];
|
2016-12-15 03:46:54 +08:00
|
|
|
if (!mi->supported[group])
|
2010-05-13 22:48:03 +08:00
|
|
|
continue;
|
|
|
|
|
|
|
|
mi->sample_count++;
|
|
|
|
|
2014-09-10 05:22:14 +08:00
|
|
|
/* (re)Initialize group rate indexes */
|
|
|
|
for(j = 0; j < MAX_THR_RATES; j++)
|
2019-08-20 17:54:46 +08:00
|
|
|
tmp_group_tp_rate[j] = MCS_GROUP_RATES * group;
|
2014-09-10 05:22:14 +08:00
|
|
|
|
2010-05-13 22:48:03 +08:00
|
|
|
for (i = 0; i < MCS_GROUP_RATES; i++) {
|
2016-12-15 03:46:54 +08:00
|
|
|
if (!(mi->supported[group] & BIT(i)))
|
2010-05-13 22:48:03 +08:00
|
|
|
continue;
|
|
|
|
|
2013-11-14 06:07:07 +08:00
|
|
|
index = MCS_GROUP_RATES * group + i;
|
|
|
|
|
2015-03-25 04:09:39 +08:00
|
|
|
mrs = &mg->rates[i];
|
|
|
|
mrs->retry_updated = false;
|
|
|
|
minstrel_calc_rate_stats(mrs);
|
2015-03-25 04:09:41 +08:00
|
|
|
cur_prob = mrs->prob_ewma;
|
2010-05-13 22:48:03 +08:00
|
|
|
|
2015-03-25 04:09:41 +08:00
|
|
|
if (minstrel_ht_get_tp_avg(mi, group, i, cur_prob) == 0)
|
2010-05-13 22:48:03 +08:00
|
|
|
continue;
|
|
|
|
|
2014-09-10 05:22:14 +08:00
|
|
|
/* Find max throughput rate set */
|
|
|
|
if (group != MINSTREL_CCK_GROUP) {
|
|
|
|
minstrel_ht_sort_best_tp_rates(mi, index,
|
|
|
|
tmp_mcs_tp_rate);
|
|
|
|
} else if (group == MINSTREL_CCK_GROUP) {
|
|
|
|
minstrel_ht_sort_best_tp_rates(mi, index,
|
|
|
|
tmp_cck_tp_rate);
|
2010-05-13 22:48:03 +08:00
|
|
|
}
|
|
|
|
|
2014-09-10 05:22:14 +08:00
|
|
|
/* Find max throughput rate set within a group */
|
|
|
|
minstrel_ht_sort_best_tp_rates(mi, index,
|
|
|
|
tmp_group_tp_rate);
|
2010-05-13 22:48:03 +08:00
|
|
|
|
2014-09-10 05:22:14 +08:00
|
|
|
/* Find max probability rate per group and global */
|
|
|
|
minstrel_ht_set_best_prob_rate(mi, index);
|
2010-05-13 22:48:03 +08:00
|
|
|
}
|
|
|
|
|
2014-09-10 05:22:14 +08:00
|
|
|
memcpy(mg->max_group_tp_rate, tmp_group_tp_rate,
|
|
|
|
sizeof(mg->max_group_tp_rate));
|
2010-05-13 22:48:03 +08:00
|
|
|
}
|
|
|
|
|
2014-09-10 05:22:14 +08:00
|
|
|
/* Assign new rate set per sta */
|
|
|
|
minstrel_ht_assign_best_tp_rates(mi, tmp_mcs_tp_rate, tmp_cck_tp_rate);
|
|
|
|
memcpy(mi->max_tp_rate, tmp_mcs_tp_rate, sizeof(mi->max_tp_rate));
|
2013-03-03 04:20:13 +08:00
|
|
|
|
2014-09-10 05:22:14 +08:00
|
|
|
/* Try to increase robustness of max_prob_rate*/
|
|
|
|
minstrel_ht_prob_rate_reduce_streams(mi);
|
|
|
|
|
|
|
|
/* try to sample all available rates during each interval */
|
|
|
|
mi->sample_count *= 8;
|
2013-03-03 04:20:13 +08:00
|
|
|
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
if (sample)
|
|
|
|
minstrel_ht_rate_sample_switch(mp, mi);
|
|
|
|
|
2013-08-27 22:59:47 +08:00
|
|
|
#ifdef CONFIG_MAC80211_DEBUGFS
|
|
|
|
/* use fixed index if set */
|
|
|
|
if (mp->fixed_rate_idx != -1) {
|
2014-09-10 05:22:14 +08:00
|
|
|
for (i = 0; i < 4; i++)
|
|
|
|
mi->max_tp_rate[i] = mp->fixed_rate_idx;
|
2013-08-27 22:59:47 +08:00
|
|
|
mi->max_prob_rate = mp->fixed_rate_idx;
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
mi->sample_mode = MINSTREL_SAMPLE_IDLE;
|
2013-08-27 22:59:47 +08:00
|
|
|
}
|
|
|
|
#endif
|
2013-03-03 04:20:13 +08:00
|
|
|
|
2014-09-10 05:22:14 +08:00
|
|
|
/* Reset update timer */
|
2015-03-25 04:09:39 +08:00
|
|
|
mi->last_stats_update = jiffies;
|
2010-05-13 22:48:03 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static bool
|
2013-02-13 17:51:08 +08:00
|
|
|
minstrel_ht_txstat_valid(struct minstrel_priv *mp, struct ieee80211_tx_rate *rate)
|
2010-05-13 22:48:03 +08:00
|
|
|
{
|
2011-11-14 22:28:19 +08:00
|
|
|
if (rate->idx < 0)
|
2010-05-13 22:48:03 +08:00
|
|
|
return false;
|
|
|
|
|
2011-11-14 22:28:19 +08:00
|
|
|
if (!rate->count)
|
2010-05-13 22:48:03 +08:00
|
|
|
return false;
|
|
|
|
|
2014-10-21 16:38:38 +08:00
|
|
|
if (rate->flags & IEEE80211_TX_RC_MCS ||
|
|
|
|
rate->flags & IEEE80211_TX_RC_VHT_MCS)
|
2013-02-13 17:51:08 +08:00
|
|
|
return true;
|
|
|
|
|
|
|
|
return rate->idx == mp->cck_rates[0] ||
|
|
|
|
rate->idx == mp->cck_rates[1] ||
|
|
|
|
rate->idx == mp->cck_rates[2] ||
|
|
|
|
rate->idx == mp->cck_rates[3];
|
2010-05-13 22:48:03 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
2015-03-25 04:09:39 +08:00
|
|
|
minstrel_set_next_sample_idx(struct minstrel_ht_sta *mi)
|
2010-05-13 22:48:03 +08:00
|
|
|
{
|
|
|
|
struct minstrel_mcs_group_data *mg;
|
|
|
|
|
|
|
|
for (;;) {
|
|
|
|
mi->sample_group++;
|
|
|
|
mi->sample_group %= ARRAY_SIZE(minstrel_mcs_groups);
|
|
|
|
mg = &mi->groups[mi->sample_group];
|
|
|
|
|
2016-12-15 03:46:54 +08:00
|
|
|
if (!mi->supported[mi->sample_group])
|
2010-05-13 22:48:03 +08:00
|
|
|
continue;
|
|
|
|
|
|
|
|
if (++mg->index >= MCS_GROUP_RATES) {
|
|
|
|
mg->index = 0;
|
|
|
|
if (++mg->column >= ARRAY_SIZE(sample_table))
|
|
|
|
mg->column = 0;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
2014-10-20 21:45:59 +08:00
|
|
|
minstrel_downgrade_rate(struct minstrel_ht_sta *mi, u16 *idx, bool primary)
|
2010-05-13 22:48:03 +08:00
|
|
|
{
|
|
|
|
int group, orig_group;
|
|
|
|
|
|
|
|
orig_group = group = *idx / MCS_GROUP_RATES;
|
|
|
|
while (group > 0) {
|
|
|
|
group--;
|
|
|
|
|
2016-12-15 03:46:54 +08:00
|
|
|
if (!mi->supported[group])
|
2010-05-13 22:48:03 +08:00
|
|
|
continue;
|
|
|
|
|
|
|
|
if (minstrel_mcs_groups[group].streams >
|
|
|
|
minstrel_mcs_groups[orig_group].streams)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if (primary)
|
2014-09-10 05:22:14 +08:00
|
|
|
*idx = mi->groups[group].max_group_tp_rate[0];
|
2010-05-13 22:48:03 +08:00
|
|
|
else
|
2014-09-10 05:22:14 +08:00
|
|
|
*idx = mi->groups[group].max_group_tp_rate[1];
|
2010-05-13 22:48:03 +08:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
2011-11-15 23:44:48 +08:00
|
|
|
minstrel_aggr_check(struct ieee80211_sta *pubsta, struct sk_buff *skb)
|
2010-05-13 22:48:03 +08:00
|
|
|
{
|
|
|
|
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
|
|
|
|
struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
|
|
|
|
u16 tid;
|
|
|
|
|
2014-11-16 07:27:55 +08:00
|
|
|
if (skb_get_queue_mapping(skb) == IEEE80211_AC_VO)
|
|
|
|
return;
|
|
|
|
|
2010-05-13 22:48:03 +08:00
|
|
|
if (unlikely(!ieee80211_is_data_qos(hdr->frame_control)))
|
|
|
|
return;
|
|
|
|
|
2013-08-22 14:36:41 +08:00
|
|
|
if (unlikely(skb->protocol == cpu_to_be16(ETH_P_PAE)))
|
2010-05-13 22:48:03 +08:00
|
|
|
return;
|
|
|
|
|
2018-02-19 20:48:40 +08:00
|
|
|
tid = ieee80211_get_tid(hdr);
|
2010-06-10 16:21:39 +08:00
|
|
|
if (likely(sta->ampdu_mlme.tid_tx[tid]))
|
2010-05-13 22:48:03 +08:00
|
|
|
return;
|
|
|
|
|
2016-02-19 02:49:18 +08:00
|
|
|
ieee80211_start_tx_ba_session(pubsta, tid, 0);
|
2010-05-13 22:48:03 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
minstrel_ht_tx_status(void *priv, struct ieee80211_supported_band *sband,
|
2017-04-26 23:11:35 +08:00
|
|
|
void *priv_sta, struct ieee80211_tx_status *st)
|
2010-05-13 22:48:03 +08:00
|
|
|
{
|
2017-04-26 23:11:35 +08:00
|
|
|
struct ieee80211_tx_info *info = st->info;
|
2010-05-13 22:48:03 +08:00
|
|
|
struct minstrel_ht_sta_priv *msp = priv_sta;
|
|
|
|
struct minstrel_ht_sta *mi = &msp->ht;
|
|
|
|
struct ieee80211_tx_rate *ar = info->status.rates;
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
struct minstrel_rate_stats *rate, *rate2, *rate_sample = NULL;
|
2010-05-13 22:48:03 +08:00
|
|
|
struct minstrel_priv *mp = priv;
|
2013-04-22 22:14:42 +08:00
|
|
|
bool last, update = false;
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
bool sample_status = false;
|
2012-11-14 04:36:27 +08:00
|
|
|
int i;
|
2010-05-13 22:48:03 +08:00
|
|
|
|
|
|
|
if (!msp->is_ht)
|
2017-04-26 23:11:35 +08:00
|
|
|
return mac80211_minstrel.tx_status_ext(priv, sband,
|
|
|
|
&msp->legacy, st);
|
2010-05-13 22:48:03 +08:00
|
|
|
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
|
2010-05-13 22:48:03 +08:00
|
|
|
/* This packet was aggregated but doesn't carry status info */
|
|
|
|
if ((info->flags & IEEE80211_TX_CTL_AMPDU) &&
|
|
|
|
!(info->flags & IEEE80211_TX_STAT_AMPDU))
|
|
|
|
return;
|
|
|
|
|
2010-10-11 04:14:25 +08:00
|
|
|
if (!(info->flags & IEEE80211_TX_STAT_AMPDU)) {
|
|
|
|
info->status.ampdu_ack_len =
|
|
|
|
(info->flags & IEEE80211_TX_STAT_ACK ? 1 : 0);
|
2010-05-13 22:48:03 +08:00
|
|
|
info->status.ampdu_len = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
mi->ampdu_packets++;
|
|
|
|
mi->ampdu_len += info->status.ampdu_len;
|
|
|
|
|
|
|
|
if (!mi->sample_wait && !mi->sample_tries && mi->sample_count > 0) {
|
2019-01-17 05:32:12 +08:00
|
|
|
int avg_ampdu_len = minstrel_ht_avg_ampdu_len(mi);
|
|
|
|
|
|
|
|
mi->sample_wait = 16 + 2 * avg_ampdu_len;
|
2013-03-05 21:20:19 +08:00
|
|
|
mi->sample_tries = 1;
|
2010-05-13 22:48:03 +08:00
|
|
|
mi->sample_count--;
|
|
|
|
}
|
|
|
|
|
2011-03-09 19:10:18 +08:00
|
|
|
if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE)
|
2010-05-13 22:48:03 +08:00
|
|
|
mi->sample_packets += info->status.ampdu_len;
|
|
|
|
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
if (mi->sample_mode != MINSTREL_SAMPLE_IDLE)
|
|
|
|
rate_sample = minstrel_get_ratestats(mi, mi->sample_rate);
|
|
|
|
|
2013-02-13 17:51:08 +08:00
|
|
|
last = !minstrel_ht_txstat_valid(mp, &ar[0]);
|
2010-05-13 22:48:03 +08:00
|
|
|
for (i = 0; !last; i++) {
|
|
|
|
last = (i == IEEE80211_TX_MAX_RATES - 1) ||
|
2013-02-13 17:51:08 +08:00
|
|
|
!minstrel_ht_txstat_valid(mp, &ar[i + 1]);
|
2010-05-13 22:48:03 +08:00
|
|
|
|
2013-02-13 17:51:08 +08:00
|
|
|
rate = minstrel_ht_get_stats(mp, mi, &ar[i]);
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
if (rate == rate_sample)
|
|
|
|
sample_status = true;
|
2010-05-13 22:48:03 +08:00
|
|
|
|
2010-10-11 04:14:25 +08:00
|
|
|
if (last)
|
2010-05-13 22:48:03 +08:00
|
|
|
rate->success += info->status.ampdu_ack_len;
|
|
|
|
|
|
|
|
rate->attempts += ar[i].count * info->status.ampdu_len;
|
|
|
|
}
|
|
|
|
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
switch (mi->sample_mode) {
|
|
|
|
case MINSTREL_SAMPLE_IDLE:
|
|
|
|
break;
|
|
|
|
|
|
|
|
case MINSTREL_SAMPLE_ACTIVE:
|
|
|
|
if (!sample_status)
|
|
|
|
break;
|
|
|
|
|
|
|
|
mi->sample_mode = MINSTREL_SAMPLE_PENDING;
|
2013-04-22 22:14:42 +08:00
|
|
|
update = true;
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
break;
|
|
|
|
|
|
|
|
case MINSTREL_SAMPLE_PENDING:
|
|
|
|
if (sample_status)
|
|
|
|
break;
|
2010-05-13 22:48:03 +08:00
|
|
|
|
2013-04-22 22:14:42 +08:00
|
|
|
update = true;
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
minstrel_ht_update_stats(mp, mi, false);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
if (mp->hw->max_rates > 1) {
|
|
|
|
/*
|
|
|
|
* check for sudden death of spatial multiplexing,
|
|
|
|
* downgrade to a lower number of streams if necessary.
|
|
|
|
*/
|
|
|
|
rate = minstrel_get_ratestats(mi, mi->max_tp_rate[0]);
|
|
|
|
if (rate->attempts > 30 &&
|
|
|
|
MINSTREL_FRAC(rate->success, rate->attempts) <
|
|
|
|
MINSTREL_FRAC(20, 100)) {
|
|
|
|
minstrel_downgrade_rate(mi, &mi->max_tp_rate[0], true);
|
|
|
|
update = true;
|
|
|
|
}
|
|
|
|
|
|
|
|
rate2 = minstrel_get_ratestats(mi, mi->max_tp_rate[1]);
|
|
|
|
if (rate2->attempts > 30 &&
|
|
|
|
MINSTREL_FRAC(rate2->success, rate2->attempts) <
|
|
|
|
MINSTREL_FRAC(20, 100)) {
|
|
|
|
minstrel_downgrade_rate(mi, &mi->max_tp_rate[1], false);
|
|
|
|
update = true;
|
|
|
|
}
|
2013-04-22 22:14:42 +08:00
|
|
|
}
|
2010-05-13 22:48:03 +08:00
|
|
|
|
2015-03-25 04:09:39 +08:00
|
|
|
if (time_after(jiffies, mi->last_stats_update +
|
|
|
|
(mp->update_interval / 2 * HZ) / 1000)) {
|
2013-04-22 22:14:42 +08:00
|
|
|
update = true;
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
minstrel_ht_update_stats(mp, mi, true);
|
2010-05-13 22:48:03 +08:00
|
|
|
}
|
2013-04-22 22:14:42 +08:00
|
|
|
|
|
|
|
if (update)
|
|
|
|
minstrel_ht_update_rates(mp, mi);
|
2010-05-13 22:48:03 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
minstrel_calc_retransmit(struct minstrel_priv *mp, struct minstrel_ht_sta *mi,
|
|
|
|
int index)
|
|
|
|
{
|
2015-03-25 04:09:39 +08:00
|
|
|
struct minstrel_rate_stats *mrs;
|
2010-05-13 22:48:03 +08:00
|
|
|
unsigned int tx_time, tx_time_rtscts, tx_time_data;
|
|
|
|
unsigned int cw = mp->cw_min;
|
2011-05-11 10:00:45 +08:00
|
|
|
unsigned int ctime = 0;
|
2010-05-13 22:48:03 +08:00
|
|
|
unsigned int t_slot = 9; /* FIXME */
|
2019-01-17 05:32:12 +08:00
|
|
|
unsigned int ampdu_len = minstrel_ht_avg_ampdu_len(mi);
|
2013-02-13 17:51:08 +08:00
|
|
|
unsigned int overhead = 0, overhead_rtscts = 0;
|
2010-05-13 22:48:03 +08:00
|
|
|
|
2015-03-25 04:09:39 +08:00
|
|
|
mrs = minstrel_get_ratestats(mi, index);
|
|
|
|
if (mrs->prob_ewma < MINSTREL_FRAC(1, 10)) {
|
|
|
|
mrs->retry_count = 1;
|
|
|
|
mrs->retry_count_rtscts = 1;
|
2010-05-13 22:48:03 +08:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2015-03-25 04:09:39 +08:00
|
|
|
mrs->retry_count = 2;
|
|
|
|
mrs->retry_count_rtscts = 2;
|
|
|
|
mrs->retry_updated = true;
|
2010-05-13 22:48:03 +08:00
|
|
|
|
2018-10-07 01:35:02 +08:00
|
|
|
tx_time_data = minstrel_get_duration(index) * ampdu_len / 1000;
|
2011-05-11 10:00:45 +08:00
|
|
|
|
|
|
|
/* Contention time for first 2 tries */
|
|
|
|
ctime = (t_slot * cw) >> 1;
|
|
|
|
cw = min((cw << 1) | 1, mp->cw_max);
|
|
|
|
ctime += (t_slot * cw) >> 1;
|
|
|
|
cw = min((cw << 1) | 1, mp->cw_max);
|
|
|
|
|
2013-02-13 17:51:08 +08:00
|
|
|
if (index / MCS_GROUP_RATES != MINSTREL_CCK_GROUP) {
|
|
|
|
overhead = mi->overhead;
|
|
|
|
overhead_rtscts = mi->overhead_rtscts;
|
|
|
|
}
|
|
|
|
|
2011-05-11 10:00:45 +08:00
|
|
|
/* Total TX time for data and Contention after first 2 tries */
|
2013-02-13 17:51:08 +08:00
|
|
|
tx_time = ctime + 2 * (overhead + tx_time_data);
|
|
|
|
tx_time_rtscts = ctime + 2 * (overhead_rtscts + tx_time_data);
|
2011-05-11 10:00:45 +08:00
|
|
|
|
|
|
|
/* See how many more tries we can fit inside segment size */
|
2010-05-13 22:48:03 +08:00
|
|
|
do {
|
2011-05-11 10:00:45 +08:00
|
|
|
/* Contention time for this try */
|
|
|
|
ctime = (t_slot * cw) >> 1;
|
|
|
|
cw = min((cw << 1) | 1, mp->cw_max);
|
|
|
|
|
|
|
|
/* Total TX time after this try */
|
2013-02-13 17:51:08 +08:00
|
|
|
tx_time += ctime + overhead + tx_time_data;
|
|
|
|
tx_time_rtscts += ctime + overhead_rtscts + tx_time_data;
|
2011-05-11 10:00:45 +08:00
|
|
|
|
2010-05-13 22:48:03 +08:00
|
|
|
if (tx_time_rtscts < mp->segment_size)
|
2015-03-25 04:09:39 +08:00
|
|
|
mrs->retry_count_rtscts++;
|
2010-05-13 22:48:03 +08:00
|
|
|
} while ((tx_time < mp->segment_size) &&
|
2015-03-25 04:09:39 +08:00
|
|
|
(++mrs->retry_count < mp->max_retry));
|
2010-05-13 22:48:03 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
minstrel_ht_set_rate(struct minstrel_priv *mp, struct minstrel_ht_sta *mi,
|
2013-04-22 22:14:42 +08:00
|
|
|
struct ieee80211_sta_rates *ratetbl, int offset, int index)
|
2010-05-13 22:48:03 +08:00
|
|
|
{
|
|
|
|
const struct mcs_group *group = &minstrel_mcs_groups[index / MCS_GROUP_RATES];
|
2015-03-25 04:09:39 +08:00
|
|
|
struct minstrel_rate_stats *mrs;
|
2013-04-22 22:14:42 +08:00
|
|
|
u8 idx;
|
2014-10-20 21:46:01 +08:00
|
|
|
u16 flags = group->flags;
|
2010-05-13 22:48:03 +08:00
|
|
|
|
2015-03-25 04:09:39 +08:00
|
|
|
mrs = minstrel_get_ratestats(mi, index);
|
|
|
|
if (!mrs->retry_updated)
|
2010-05-13 22:48:03 +08:00
|
|
|
minstrel_calc_retransmit(mp, mi, index);
|
|
|
|
|
2015-03-25 04:09:39 +08:00
|
|
|
if (mrs->prob_ewma < MINSTREL_FRAC(20, 100) || !mrs->retry_count) {
|
2013-04-22 22:14:42 +08:00
|
|
|
ratetbl->rate[offset].count = 2;
|
|
|
|
ratetbl->rate[offset].count_rts = 2;
|
|
|
|
ratetbl->rate[offset].count_cts = 2;
|
|
|
|
} else {
|
2015-03-25 04:09:39 +08:00
|
|
|
ratetbl->rate[offset].count = mrs->retry_count;
|
|
|
|
ratetbl->rate[offset].count_cts = mrs->retry_count;
|
|
|
|
ratetbl->rate[offset].count_rts = mrs->retry_count_rtscts;
|
2013-04-22 22:14:42 +08:00
|
|
|
}
|
2013-02-13 17:51:08 +08:00
|
|
|
|
2014-10-20 21:46:01 +08:00
|
|
|
if (index / MCS_GROUP_RATES == MINSTREL_CCK_GROUP)
|
2013-04-22 22:14:42 +08:00
|
|
|
idx = mp->cck_rates[index % ARRAY_SIZE(mp->cck_rates)];
|
2014-10-21 16:38:38 +08:00
|
|
|
else if (flags & IEEE80211_TX_RC_VHT_MCS)
|
|
|
|
idx = ((group->streams - 1) << 4) |
|
|
|
|
((index % MCS_GROUP_RATES) & 0xF);
|
2014-10-20 21:46:01 +08:00
|
|
|
else
|
2013-11-11 20:12:55 +08:00
|
|
|
idx = index % MCS_GROUP_RATES + (group->streams - 1) * 8;
|
2013-04-22 22:14:42 +08:00
|
|
|
|
2015-06-12 05:04:52 +08:00
|
|
|
/* enable RTS/CTS if needed:
|
|
|
|
* - if station is in dynamic SMPS (and streams > 1)
|
|
|
|
* - for fallback rates, to increase chances of getting through
|
|
|
|
*/
|
2016-02-24 19:07:17 +08:00
|
|
|
if (offset > 0 ||
|
2015-06-12 05:04:52 +08:00
|
|
|
(mi->sta->smps_mode == IEEE80211_SMPS_DYNAMIC &&
|
|
|
|
group->streams > 1)) {
|
2013-04-22 22:14:42 +08:00
|
|
|
ratetbl->rate[offset].count = ratetbl->rate[offset].count_rts;
|
|
|
|
flags |= IEEE80211_TX_RC_USE_RTS_CTS;
|
|
|
|
}
|
|
|
|
|
|
|
|
ratetbl->rate[offset].idx = idx;
|
|
|
|
ratetbl->rate[offset].flags = flags;
|
|
|
|
}
|
|
|
|
|
2016-03-04 05:59:01 +08:00
|
|
|
static inline int
|
|
|
|
minstrel_ht_get_prob_ewma(struct minstrel_ht_sta *mi, int rate)
|
|
|
|
{
|
|
|
|
int group = rate / MCS_GROUP_RATES;
|
|
|
|
rate %= MCS_GROUP_RATES;
|
|
|
|
return mi->groups[group].rates[rate].prob_ewma;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
minstrel_ht_get_max_amsdu_len(struct minstrel_ht_sta *mi)
|
|
|
|
{
|
|
|
|
int group = mi->max_prob_rate / MCS_GROUP_RATES;
|
|
|
|
const struct mcs_group *g = &minstrel_mcs_groups[group];
|
|
|
|
int rate = mi->max_prob_rate % MCS_GROUP_RATES;
|
2018-10-07 01:35:02 +08:00
|
|
|
unsigned int duration;
|
2016-03-04 05:59:01 +08:00
|
|
|
|
|
|
|
/* Disable A-MSDU if max_prob_rate is bad */
|
|
|
|
if (mi->groups[group].rates[rate].prob_ewma < MINSTREL_FRAC(50, 100))
|
|
|
|
return 1;
|
|
|
|
|
2018-10-07 01:35:02 +08:00
|
|
|
duration = g->duration[rate];
|
|
|
|
duration <<= g->shift;
|
|
|
|
|
2016-03-04 05:59:01 +08:00
|
|
|
/* If the rate is slower than single-stream MCS1, make A-MSDU limit small */
|
2018-10-07 01:35:02 +08:00
|
|
|
if (duration > MCS_DURATION(1, 0, 52))
|
2016-03-04 05:59:01 +08:00
|
|
|
return 500;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If the rate is slower than single-stream MCS4, limit A-MSDU to usual
|
|
|
|
* data packet size
|
|
|
|
*/
|
2018-10-07 01:35:02 +08:00
|
|
|
if (duration > MCS_DURATION(1, 0, 104))
|
2016-03-04 05:59:01 +08:00
|
|
|
return 1600;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If the rate is slower than single-stream MCS7, or if the max throughput
|
|
|
|
* rate success probability is less than 75%, limit A-MSDU to twice the usual
|
|
|
|
* data packet size
|
|
|
|
*/
|
2018-10-07 01:35:02 +08:00
|
|
|
if (duration > MCS_DURATION(1, 0, 260) ||
|
2016-03-04 05:59:01 +08:00
|
|
|
(minstrel_ht_get_prob_ewma(mi, mi->max_tp_rate[0]) <
|
|
|
|
MINSTREL_FRAC(75, 100)))
|
|
|
|
return 3200;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* HT A-MPDU limits maximum MPDU size under BA agreement to 4095 bytes.
|
|
|
|
* Since aggregation sessions are started/stopped without txq flush, use
|
|
|
|
* the limit here to avoid the complexity of having to de-aggregate
|
|
|
|
* packets in the queue.
|
|
|
|
*/
|
|
|
|
if (!mi->sta->vht_cap.vht_supported)
|
|
|
|
return IEEE80211_MAX_MPDU_LEN_HT_BA;
|
|
|
|
|
|
|
|
/* unlimited */
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2013-04-22 22:14:42 +08:00
|
|
|
static void
|
|
|
|
minstrel_ht_update_rates(struct minstrel_priv *mp, struct minstrel_ht_sta *mi)
|
|
|
|
{
|
|
|
|
struct ieee80211_sta_rates *rates;
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
u16 first_rate = mi->max_tp_rate[0];
|
2013-04-22 22:14:42 +08:00
|
|
|
int i = 0;
|
|
|
|
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
if (mi->sample_mode == MINSTREL_SAMPLE_ACTIVE)
|
|
|
|
first_rate = mi->sample_rate;
|
|
|
|
|
2013-04-22 22:14:42 +08:00
|
|
|
rates = kzalloc(sizeof(*rates), GFP_ATOMIC);
|
|
|
|
if (!rates)
|
2013-02-13 17:51:08 +08:00
|
|
|
return;
|
2013-04-22 22:14:42 +08:00
|
|
|
|
2014-09-10 05:22:14 +08:00
|
|
|
/* Start with max_tp_rate[0] */
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
minstrel_ht_set_rate(mp, mi, rates, i++, first_rate);
|
2013-04-22 22:14:42 +08:00
|
|
|
|
|
|
|
if (mp->hw->max_rates >= 3) {
|
2014-09-10 05:22:14 +08:00
|
|
|
/* At least 3 tx rates supported, use max_tp_rate[1] next */
|
|
|
|
minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_tp_rate[1]);
|
2013-04-22 22:14:42 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
if (mp->hw->max_rates >= 2) {
|
|
|
|
minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_prob_rate);
|
2013-02-13 17:51:08 +08:00
|
|
|
}
|
|
|
|
|
2016-03-04 05:59:01 +08:00
|
|
|
mi->sta->max_rc_amsdu_len = minstrel_ht_get_max_amsdu_len(mi);
|
2013-04-22 22:14:42 +08:00
|
|
|
rates->rate[i].idx = -1;
|
|
|
|
rate_control_set_rates(mp->hw, mi->sta, rates);
|
2010-05-13 22:48:03 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
minstrel_get_sample_rate(struct minstrel_priv *mp, struct minstrel_ht_sta *mi)
|
|
|
|
{
|
2015-03-25 04:09:39 +08:00
|
|
|
struct minstrel_rate_stats *mrs;
|
2010-05-13 22:48:03 +08:00
|
|
|
struct minstrel_mcs_group_data *mg;
|
2014-09-10 05:22:14 +08:00
|
|
|
unsigned int sample_dur, sample_group, cur_max_tp_streams;
|
2016-03-04 06:25:42 +08:00
|
|
|
int tp_rate1, tp_rate2;
|
2010-05-13 22:48:03 +08:00
|
|
|
int sample_idx = 0;
|
|
|
|
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
if (mp->hw->max_rates == 1 && mp->sample_switch &&
|
|
|
|
(mi->total_packets_cur >= SAMPLE_SWITCH_THR ||
|
|
|
|
mp->sample_switch == 1))
|
|
|
|
return -1;
|
|
|
|
|
2010-05-13 22:48:03 +08:00
|
|
|
if (mi->sample_wait > 0) {
|
|
|
|
mi->sample_wait--;
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!mi->sample_tries)
|
|
|
|
return -1;
|
|
|
|
|
2013-11-11 20:10:49 +08:00
|
|
|
sample_group = mi->sample_group;
|
|
|
|
mg = &mi->groups[sample_group];
|
2010-05-13 22:48:03 +08:00
|
|
|
sample_idx = sample_table[mg->column][mg->index];
|
2015-03-25 04:09:39 +08:00
|
|
|
minstrel_set_next_sample_idx(mi);
|
2013-11-11 20:10:49 +08:00
|
|
|
|
2016-12-15 03:46:54 +08:00
|
|
|
if (!(mi->supported[sample_group] & BIT(sample_idx)))
|
2013-11-11 20:10:49 +08:00
|
|
|
return -1;
|
|
|
|
|
2015-03-25 04:09:39 +08:00
|
|
|
mrs = &mg->rates[sample_idx];
|
2013-03-03 19:49:51 +08:00
|
|
|
sample_idx += sample_group * MCS_GROUP_RATES;
|
2010-05-13 22:48:03 +08:00
|
|
|
|
2016-03-04 06:25:42 +08:00
|
|
|
/* Set tp_rate1, tp_rate2 to the highest / second highest max_tp_rate */
|
|
|
|
if (minstrel_get_duration(mi->max_tp_rate[0]) >
|
|
|
|
minstrel_get_duration(mi->max_tp_rate[1])) {
|
|
|
|
tp_rate1 = mi->max_tp_rate[1];
|
|
|
|
tp_rate2 = mi->max_tp_rate[0];
|
|
|
|
} else {
|
|
|
|
tp_rate1 = mi->max_tp_rate[0];
|
|
|
|
tp_rate2 = mi->max_tp_rate[1];
|
|
|
|
}
|
|
|
|
|
2012-03-14 20:31:11 +08:00
|
|
|
/*
|
|
|
|
* Sampling might add some overhead (RTS, no aggregation)
|
2016-03-04 06:25:42 +08:00
|
|
|
* to the frame. Hence, don't use sampling for the highest currently
|
|
|
|
* used highest throughput or probability rate.
|
2012-03-14 20:31:11 +08:00
|
|
|
*/
|
2016-03-04 06:25:42 +08:00
|
|
|
if (sample_idx == mi->max_tp_rate[0] || sample_idx == mi->max_prob_rate)
|
2012-03-14 20:31:11 +08:00
|
|
|
return -1;
|
2013-03-17 00:00:27 +08:00
|
|
|
|
2010-05-13 22:48:03 +08:00
|
|
|
/*
|
2018-10-07 01:35:06 +08:00
|
|
|
* Do not sample if the probability is already higher than 95%,
|
|
|
|
* or if the rate is 3 times slower than the current max probability
|
|
|
|
* rate, to avoid wasting airtime.
|
2010-05-13 22:48:03 +08:00
|
|
|
*/
|
2018-10-07 01:35:06 +08:00
|
|
|
sample_dur = minstrel_get_duration(sample_idx);
|
|
|
|
if (mrs->prob_ewma > MINSTREL_FRAC(95, 100) ||
|
|
|
|
minstrel_get_duration(mi->max_prob_rate) * 3 < sample_dur)
|
2011-03-09 19:10:18 +08:00
|
|
|
return -1;
|
2010-05-13 22:48:03 +08:00
|
|
|
|
2019-08-20 17:54:47 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* For devices with no configurable multi-rate retry, skip sampling
|
|
|
|
* below the per-group max throughput rate, and only use one sampling
|
|
|
|
* attempt per rate
|
|
|
|
*/
|
|
|
|
if (mp->hw->max_rates == 1 &&
|
|
|
|
(minstrel_get_duration(mg->max_group_tp_rate[0]) < sample_dur ||
|
|
|
|
mrs->attempts))
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
/* Skip already sampled slow rates */
|
|
|
|
if (sample_dur >= minstrel_get_duration(tp_rate1) && mrs->attempts)
|
|
|
|
return -1;
|
|
|
|
|
2010-05-13 22:48:03 +08:00
|
|
|
/*
|
|
|
|
* Make sure that lower rates get sampled only occasionally,
|
|
|
|
* if the link is working perfectly.
|
|
|
|
*/
|
2014-09-10 05:22:14 +08:00
|
|
|
|
2016-03-04 06:25:42 +08:00
|
|
|
cur_max_tp_streams = minstrel_mcs_groups[tp_rate1 /
|
2014-09-10 05:22:14 +08:00
|
|
|
MCS_GROUP_RATES].streams;
|
2016-03-04 06:25:42 +08:00
|
|
|
if (sample_dur >= minstrel_get_duration(tp_rate2) &&
|
2014-09-10 05:22:14 +08:00
|
|
|
(cur_max_tp_streams - 1 <
|
2013-03-03 19:49:51 +08:00
|
|
|
minstrel_mcs_groups[sample_group].streams ||
|
|
|
|
sample_dur >= minstrel_get_duration(mi->max_prob_rate))) {
|
2015-03-25 04:09:39 +08:00
|
|
|
if (mrs->sample_skipped < 20)
|
2011-03-09 19:10:18 +08:00
|
|
|
return -1;
|
2010-05-13 22:48:03 +08:00
|
|
|
|
|
|
|
if (mi->sample_slow++ > 2)
|
2011-03-09 19:10:18 +08:00
|
|
|
return -1;
|
2010-05-13 22:48:03 +08:00
|
|
|
}
|
2013-03-03 19:49:52 +08:00
|
|
|
mi->sample_tries--;
|
2010-05-13 22:48:03 +08:00
|
|
|
|
|
|
|
return sample_idx;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
minstrel_ht_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
|
|
|
|
struct ieee80211_tx_rate_control *txrc)
|
|
|
|
{
|
2013-04-22 22:14:42 +08:00
|
|
|
const struct mcs_group *sample_group;
|
2010-05-13 22:48:03 +08:00
|
|
|
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb);
|
2013-04-22 22:14:42 +08:00
|
|
|
struct ieee80211_tx_rate *rate = &info->status.rates[0];
|
2010-05-13 22:48:03 +08:00
|
|
|
struct minstrel_ht_sta_priv *msp = priv_sta;
|
|
|
|
struct minstrel_ht_sta *mi = &msp->ht;
|
|
|
|
struct minstrel_priv *mp = priv;
|
|
|
|
int sample_idx;
|
|
|
|
|
|
|
|
if (!msp->is_ht)
|
|
|
|
return mac80211_minstrel.get_rate(priv, sta, &msp->legacy, txrc);
|
|
|
|
|
2014-11-20 03:08:07 +08:00
|
|
|
if (!(info->flags & IEEE80211_TX_CTL_AMPDU) &&
|
|
|
|
mi->max_prob_rate / MCS_GROUP_RATES != MINSTREL_CCK_GROUP)
|
|
|
|
minstrel_aggr_check(sta, txrc->skb);
|
|
|
|
|
2010-05-13 22:48:03 +08:00
|
|
|
info->flags |= mi->tx_flags;
|
2011-08-01 17:32:53 +08:00
|
|
|
|
2013-08-27 22:59:47 +08:00
|
|
|
#ifdef CONFIG_MAC80211_DEBUGFS
|
|
|
|
if (mp->fixed_rate_idx != -1)
|
|
|
|
return;
|
|
|
|
#endif
|
|
|
|
|
2011-08-01 17:32:53 +08:00
|
|
|
/* Don't use EAPOL frames for sampling on non-mrr hw */
|
|
|
|
if (mp->hw->max_rates == 1 &&
|
2013-07-03 00:09:12 +08:00
|
|
|
(info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO))
|
2011-08-01 17:32:53 +08:00
|
|
|
sample_idx = -1;
|
|
|
|
else
|
|
|
|
sample_idx = minstrel_get_sample_rate(mp, mi);
|
2011-05-21 02:29:17 +08:00
|
|
|
|
2010-05-13 22:48:03 +08:00
|
|
|
mi->total_packets++;
|
|
|
|
|
|
|
|
/* wraparound */
|
|
|
|
if (mi->total_packets == ~0) {
|
|
|
|
mi->total_packets = 0;
|
|
|
|
mi->sample_packets = 0;
|
|
|
|
}
|
2013-04-22 22:14:42 +08:00
|
|
|
|
|
|
|
if (sample_idx < 0)
|
|
|
|
return;
|
|
|
|
|
|
|
|
sample_group = &minstrel_mcs_groups[sample_idx / MCS_GROUP_RATES];
|
2018-10-07 01:35:05 +08:00
|
|
|
sample_idx %= MCS_GROUP_RATES;
|
|
|
|
|
|
|
|
if (sample_group == &minstrel_mcs_groups[MINSTREL_CCK_GROUP] &&
|
|
|
|
(sample_idx >= 4) != txrc->short_preamble)
|
|
|
|
return;
|
|
|
|
|
2013-04-22 22:14:42 +08:00
|
|
|
info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
|
2013-06-29 03:04:35 +08:00
|
|
|
rate->count = 1;
|
|
|
|
|
2018-10-07 01:35:05 +08:00
|
|
|
if (sample_group == &minstrel_mcs_groups[MINSTREL_CCK_GROUP]) {
|
2013-06-29 03:04:35 +08:00
|
|
|
int idx = sample_idx % ARRAY_SIZE(mp->cck_rates);
|
|
|
|
rate->idx = mp->cck_rates[idx];
|
2014-10-21 16:38:38 +08:00
|
|
|
} else if (sample_group->flags & IEEE80211_TX_RC_VHT_MCS) {
|
|
|
|
ieee80211_rate_set_vht(rate, sample_idx % MCS_GROUP_RATES,
|
|
|
|
sample_group->streams);
|
2014-10-20 21:46:01 +08:00
|
|
|
} else {
|
2018-10-07 01:35:05 +08:00
|
|
|
rate->idx = sample_idx + (sample_group->streams - 1) * 8;
|
2013-06-29 03:04:35 +08:00
|
|
|
}
|
|
|
|
|
2014-10-20 21:46:01 +08:00
|
|
|
rate->flags = sample_group->flags;
|
2010-05-13 22:48:03 +08:00
|
|
|
}
|
|
|
|
|
2013-02-13 17:51:08 +08:00
|
|
|
static void
|
|
|
|
minstrel_ht_update_cck(struct minstrel_priv *mp, struct minstrel_ht_sta *mi,
|
|
|
|
struct ieee80211_supported_band *sband,
|
|
|
|
struct ieee80211_sta *sta)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
2016-04-12 21:56:15 +08:00
|
|
|
if (sband->band != NL80211_BAND_2GHZ)
|
2013-02-13 17:51:08 +08:00
|
|
|
return;
|
|
|
|
|
2015-06-03 03:39:54 +08:00
|
|
|
if (!ieee80211_hw_check(mp->hw, SUPPORTS_HT_CCK_RATES))
|
2013-08-21 01:43:54 +08:00
|
|
|
return;
|
|
|
|
|
2013-02-13 17:51:08 +08:00
|
|
|
mi->cck_supported = 0;
|
|
|
|
mi->cck_supported_short = 0;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
|
|
if (!rate_supported(sta, sband->band, mp->cck_rates[i]))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
mi->cck_supported |= BIT(i);
|
|
|
|
if (sband->bitrates[i].flags & IEEE80211_RATE_SHORT_PREAMBLE)
|
|
|
|
mi->cck_supported_short |= BIT(i);
|
|
|
|
}
|
|
|
|
|
2016-12-15 03:46:54 +08:00
|
|
|
mi->supported[MINSTREL_CCK_GROUP] = mi->cck_supported;
|
2013-02-13 17:51:08 +08:00
|
|
|
}
|
|
|
|
|
2010-05-13 22:48:03 +08:00
|
|
|
static void
|
|
|
|
minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband,
|
2013-07-08 22:55:50 +08:00
|
|
|
struct cfg80211_chan_def *chandef,
|
2012-03-28 16:58:37 +08:00
|
|
|
struct ieee80211_sta *sta, void *priv_sta)
|
2010-05-13 22:48:03 +08:00
|
|
|
{
|
|
|
|
struct minstrel_priv *mp = priv;
|
|
|
|
struct minstrel_ht_sta_priv *msp = priv_sta;
|
|
|
|
struct minstrel_ht_sta *mi = &msp->ht;
|
|
|
|
struct ieee80211_mcs_info *mcs = &sta->ht_cap.mcs;
|
2018-10-07 01:34:59 +08:00
|
|
|
u16 ht_cap = sta->ht_cap.cap;
|
2014-10-21 16:38:38 +08:00
|
|
|
struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap;
|
|
|
|
int use_vht;
|
2011-03-25 22:30:38 +08:00
|
|
|
int n_supported = 0;
|
2010-05-13 22:48:03 +08:00
|
|
|
int ack_dur;
|
|
|
|
int stbc;
|
|
|
|
int i;
|
2018-10-07 01:34:59 +08:00
|
|
|
bool ldpc;
|
2010-05-13 22:48:03 +08:00
|
|
|
|
|
|
|
/* fall back to the old minstrel for legacy stations */
|
2011-03-25 22:30:38 +08:00
|
|
|
if (!sta->ht_cap.ht_supported)
|
|
|
|
goto use_legacy;
|
2010-05-13 22:48:03 +08:00
|
|
|
|
2014-10-20 21:46:00 +08:00
|
|
|
BUILD_BUG_ON(ARRAY_SIZE(minstrel_mcs_groups) != MINSTREL_GROUPS_NB);
|
2010-05-13 22:48:03 +08:00
|
|
|
|
2014-10-21 16:38:38 +08:00
|
|
|
if (vht_cap->vht_supported)
|
|
|
|
use_vht = vht_cap->vht_mcs.tx_mcs_map != cpu_to_le16(~0);
|
|
|
|
else
|
2018-10-07 01:35:01 +08:00
|
|
|
use_vht = 0;
|
2014-10-21 16:38:38 +08:00
|
|
|
|
2010-05-13 22:48:03 +08:00
|
|
|
msp->is_ht = true;
|
|
|
|
memset(mi, 0, sizeof(*mi));
|
2013-04-22 22:14:42 +08:00
|
|
|
|
|
|
|
mi->sta = sta;
|
2015-03-25 04:09:39 +08:00
|
|
|
mi->last_stats_update = jiffies;
|
2010-05-13 22:48:03 +08:00
|
|
|
|
2013-07-08 22:55:51 +08:00
|
|
|
ack_dur = ieee80211_frame_duration(sband->band, 10, 60, 1, 1, 0);
|
|
|
|
mi->overhead = ieee80211_frame_duration(sband->band, 0, 60, 1, 1, 0);
|
|
|
|
mi->overhead += ack_dur;
|
2010-05-13 22:48:03 +08:00
|
|
|
mi->overhead_rtscts = mi->overhead + 2 * ack_dur;
|
|
|
|
|
|
|
|
mi->avg_ampdu_len = MINSTREL_FRAC(1, 1);
|
|
|
|
|
|
|
|
/* When using MRR, sample more on the first attempt, without delay */
|
|
|
|
if (mp->has_mrr) {
|
|
|
|
mi->sample_count = 16;
|
|
|
|
mi->sample_wait = 0;
|
|
|
|
} else {
|
|
|
|
mi->sample_count = 8;
|
|
|
|
mi->sample_wait = 8;
|
|
|
|
}
|
|
|
|
mi->sample_tries = 4;
|
|
|
|
|
2014-10-21 16:38:38 +08:00
|
|
|
if (!use_vht) {
|
2018-10-07 01:34:59 +08:00
|
|
|
stbc = (ht_cap & IEEE80211_HT_CAP_RX_STBC) >>
|
2014-10-21 16:38:38 +08:00
|
|
|
IEEE80211_HT_CAP_RX_STBC_SHIFT;
|
2010-05-13 22:48:03 +08:00
|
|
|
|
2018-10-07 01:34:59 +08:00
|
|
|
ldpc = ht_cap & IEEE80211_HT_CAP_LDPC_CODING;
|
|
|
|
} else {
|
|
|
|
stbc = (vht_cap->cap & IEEE80211_VHT_CAP_RXSTBC_MASK) >>
|
|
|
|
IEEE80211_VHT_CAP_RXSTBC_SHIFT;
|
|
|
|
|
|
|
|
ldpc = vht_cap->cap & IEEE80211_VHT_CAP_RXLDPC;
|
2014-10-21 16:38:38 +08:00
|
|
|
}
|
2010-05-13 22:48:03 +08:00
|
|
|
|
2018-10-07 01:34:59 +08:00
|
|
|
mi->tx_flags |= stbc << IEEE80211_TX_CTL_STBC_SHIFT;
|
|
|
|
if (ldpc)
|
|
|
|
mi->tx_flags |= IEEE80211_TX_CTL_LDPC;
|
|
|
|
|
2010-05-13 22:48:03 +08:00
|
|
|
for (i = 0; i < ARRAY_SIZE(mi->groups); i++) {
|
2014-10-20 21:46:01 +08:00
|
|
|
u32 gflags = minstrel_mcs_groups[i].flags;
|
2014-10-21 16:38:38 +08:00
|
|
|
int bw, nss;
|
2014-10-20 21:46:01 +08:00
|
|
|
|
2016-12-15 03:46:54 +08:00
|
|
|
mi->supported[i] = 0;
|
2013-02-13 17:51:08 +08:00
|
|
|
if (i == MINSTREL_CCK_GROUP) {
|
|
|
|
minstrel_ht_update_cck(mp, mi, sband, sta);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
2014-10-20 21:46:01 +08:00
|
|
|
if (gflags & IEEE80211_TX_RC_SHORT_GI) {
|
|
|
|
if (gflags & IEEE80211_TX_RC_40_MHZ_WIDTH) {
|
2018-10-07 01:34:59 +08:00
|
|
|
if (!(ht_cap & IEEE80211_HT_CAP_SGI_40))
|
2013-02-07 18:47:44 +08:00
|
|
|
continue;
|
|
|
|
} else {
|
2018-10-07 01:34:59 +08:00
|
|
|
if (!(ht_cap & IEEE80211_HT_CAP_SGI_20))
|
2013-02-07 18:47:44 +08:00
|
|
|
continue;
|
|
|
|
}
|
2010-05-13 22:48:03 +08:00
|
|
|
}
|
|
|
|
|
2014-10-20 21:46:01 +08:00
|
|
|
if (gflags & IEEE80211_TX_RC_40_MHZ_WIDTH &&
|
2013-02-07 18:47:44 +08:00
|
|
|
sta->bandwidth < IEEE80211_STA_RX_BW_40)
|
2010-05-13 22:48:03 +08:00
|
|
|
continue;
|
|
|
|
|
2014-10-21 16:38:38 +08:00
|
|
|
nss = minstrel_mcs_groups[i].streams;
|
|
|
|
|
2012-03-09 21:13:45 +08:00
|
|
|
/* Mark MCS > 7 as unsupported if STA is in static SMPS mode */
|
2014-10-21 16:38:38 +08:00
|
|
|
if (sta->smps_mode == IEEE80211_SMPS_STATIC && nss > 1)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/* HT rate */
|
|
|
|
if (gflags & IEEE80211_TX_RC_MCS) {
|
2014-10-24 20:34:49 +08:00
|
|
|
if (use_vht && minstrel_vht_only)
|
2014-10-21 16:38:38 +08:00
|
|
|
continue;
|
2018-10-07 01:35:01 +08:00
|
|
|
|
2016-12-15 03:46:54 +08:00
|
|
|
mi->supported[i] = mcs->rx_mask[nss - 1];
|
|
|
|
if (mi->supported[i])
|
2014-10-21 16:38:38 +08:00
|
|
|
n_supported++;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* VHT rate */
|
|
|
|
if (!vht_cap->vht_supported ||
|
|
|
|
WARN_ON(!(gflags & IEEE80211_TX_RC_VHT_MCS)) ||
|
|
|
|
WARN_ON(gflags & IEEE80211_TX_RC_160_MHZ_WIDTH))
|
2012-03-09 21:13:45 +08:00
|
|
|
continue;
|
|
|
|
|
2014-10-21 16:38:38 +08:00
|
|
|
if (gflags & IEEE80211_TX_RC_80_MHZ_WIDTH) {
|
|
|
|
if (sta->bandwidth < IEEE80211_STA_RX_BW_80 ||
|
|
|
|
((gflags & IEEE80211_TX_RC_SHORT_GI) &&
|
|
|
|
!(vht_cap->cap & IEEE80211_VHT_CAP_SHORT_GI_80))) {
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (gflags & IEEE80211_TX_RC_40_MHZ_WIDTH)
|
|
|
|
bw = BW_40;
|
|
|
|
else if (gflags & IEEE80211_TX_RC_80_MHZ_WIDTH)
|
|
|
|
bw = BW_80;
|
|
|
|
else
|
|
|
|
bw = BW_20;
|
|
|
|
|
2016-12-15 03:46:54 +08:00
|
|
|
mi->supported[i] = minstrel_get_valid_vht_rates(bw, nss,
|
2014-10-21 16:38:38 +08:00
|
|
|
vht_cap->vht_mcs.tx_mcs_map);
|
2011-03-25 22:30:38 +08:00
|
|
|
|
2016-12-15 03:46:54 +08:00
|
|
|
if (mi->supported[i])
|
2011-03-25 22:30:38 +08:00
|
|
|
n_supported++;
|
2010-05-13 22:48:03 +08:00
|
|
|
}
|
2011-03-25 22:30:38 +08:00
|
|
|
|
|
|
|
if (!n_supported)
|
|
|
|
goto use_legacy;
|
|
|
|
|
2018-10-07 01:35:03 +08:00
|
|
|
mi->supported[MINSTREL_CCK_GROUP] |= mi->cck_supported_short << 4;
|
2016-12-15 03:46:55 +08:00
|
|
|
|
2013-04-22 22:14:42 +08:00
|
|
|
/* create an initial rate table with the lowest supported rates */
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
minstrel_ht_update_stats(mp, mi, true);
|
2013-04-22 22:14:42 +08:00
|
|
|
minstrel_ht_update_rates(mp, mi);
|
2013-04-18 20:26:21 +08:00
|
|
|
|
2011-03-25 22:30:38 +08:00
|
|
|
return;
|
|
|
|
|
|
|
|
use_legacy:
|
|
|
|
msp->is_ht = false;
|
|
|
|
memset(&msp->legacy, 0, sizeof(msp->legacy));
|
|
|
|
msp->legacy.r = msp->ratelist;
|
|
|
|
msp->legacy.sample_table = msp->sample_table;
|
2013-07-08 22:55:50 +08:00
|
|
|
return mac80211_minstrel.rate_init(priv, sband, chandef, sta,
|
|
|
|
&msp->legacy);
|
2010-05-13 22:48:03 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
minstrel_ht_rate_init(void *priv, struct ieee80211_supported_band *sband,
|
2013-07-08 22:55:50 +08:00
|
|
|
struct cfg80211_chan_def *chandef,
|
2010-05-13 22:48:03 +08:00
|
|
|
struct ieee80211_sta *sta, void *priv_sta)
|
|
|
|
{
|
2013-07-08 22:55:50 +08:00
|
|
|
minstrel_ht_update_caps(priv, sband, chandef, sta, priv_sta);
|
2010-05-13 22:48:03 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
minstrel_ht_rate_update(void *priv, struct ieee80211_supported_band *sband,
|
2013-07-08 22:55:50 +08:00
|
|
|
struct cfg80211_chan_def *chandef,
|
2010-05-13 22:48:03 +08:00
|
|
|
struct ieee80211_sta *sta, void *priv_sta,
|
2012-03-28 16:58:37 +08:00
|
|
|
u32 changed)
|
2010-05-13 22:48:03 +08:00
|
|
|
{
|
2013-07-08 22:55:50 +08:00
|
|
|
minstrel_ht_update_caps(priv, sband, chandef, sta, priv_sta);
|
2010-05-13 22:48:03 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void *
|
|
|
|
minstrel_ht_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp)
|
|
|
|
{
|
|
|
|
struct ieee80211_supported_band *sband;
|
|
|
|
struct minstrel_ht_sta_priv *msp;
|
|
|
|
struct minstrel_priv *mp = priv;
|
|
|
|
struct ieee80211_hw *hw = mp->hw;
|
|
|
|
int max_rates = 0;
|
|
|
|
int i;
|
|
|
|
|
2016-04-12 21:56:15 +08:00
|
|
|
for (i = 0; i < NUM_NL80211_BANDS; i++) {
|
2010-05-13 22:48:03 +08:00
|
|
|
sband = hw->wiphy->bands[i];
|
|
|
|
if (sband && sband->n_bitrates > max_rates)
|
|
|
|
max_rates = sband->n_bitrates;
|
|
|
|
}
|
|
|
|
|
2012-06-29 21:26:27 +08:00
|
|
|
msp = kzalloc(sizeof(*msp), gfp);
|
2010-05-13 22:48:03 +08:00
|
|
|
if (!msp)
|
|
|
|
return NULL;
|
|
|
|
|
treewide: kzalloc() -> kcalloc()
The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:
kzalloc(a * b, gfp)
with:
kcalloc(a * b, gfp)
as well as handling cases of:
kzalloc(a * b * c, gfp)
with:
kzalloc(array3_size(a, b, c), gfp)
as it's slightly less ugly than:
kzalloc_array(array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
kzalloc(4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@
(
kzalloc(
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
kzalloc(
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@
(
kzalloc(
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(char) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@
- kzalloc
+ kcalloc
(
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
kzalloc(
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
kzalloc(
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc(
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@
(
kzalloc(
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
kzalloc(C1 * C2 * C3, ...)
|
kzalloc(
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
kzalloc(sizeof(THING) * C2, ...)
|
kzalloc(sizeof(TYPE) * C2, ...)
|
kzalloc(C1 * C2 * C3, ...)
|
kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- (E1) * E2
+ E1, E2
, ...)
|
- kzalloc
+ kcalloc
(
- (E1) * (E2)
+ E1, E2
, ...)
|
- kzalloc
+ kcalloc
(
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:03:40 +08:00
|
|
|
msp->ratelist = kcalloc(max_rates, sizeof(struct minstrel_rate), gfp);
|
2010-05-13 22:48:03 +08:00
|
|
|
if (!msp->ratelist)
|
|
|
|
goto error;
|
|
|
|
|
treewide: kmalloc() -> kmalloc_array()
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:
kmalloc(a * b, gfp)
with:
kmalloc_array(a * b, gfp)
as well as handling cases of:
kmalloc(a * b * c, gfp)
with:
kmalloc(array3_size(a, b, c), gfp)
as it's slightly less ugly than:
kmalloc_array(array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
kmalloc(4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@
(
kmalloc(
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
kmalloc(
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@
(
kmalloc(
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(char) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@
- kmalloc
+ kmalloc_array
(
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
kmalloc(
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
kmalloc(
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kmalloc(
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@
(
kmalloc(
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
kmalloc(C1 * C2 * C3, ...)
|
kmalloc(
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
kmalloc(sizeof(THING) * C2, ...)
|
kmalloc(sizeof(TYPE) * C2, ...)
|
kmalloc(C1 * C2 * C3, ...)
|
kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- (E1) * E2
+ E1, E2
, ...)
|
- kmalloc
+ kmalloc_array
(
- (E1) * (E2)
+ E1, E2
, ...)
|
- kmalloc
+ kmalloc_array
(
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 04:55:00 +08:00
|
|
|
msp->sample_table = kmalloc_array(max_rates, SAMPLE_COLUMNS, gfp);
|
2010-05-13 22:48:03 +08:00
|
|
|
if (!msp->sample_table)
|
|
|
|
goto error1;
|
|
|
|
|
|
|
|
return msp;
|
|
|
|
|
|
|
|
error1:
|
2010-07-22 19:14:19 +08:00
|
|
|
kfree(msp->ratelist);
|
2010-05-13 22:48:03 +08:00
|
|
|
error:
|
|
|
|
kfree(msp);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
minstrel_ht_free_sta(void *priv, struct ieee80211_sta *sta, void *priv_sta)
|
|
|
|
{
|
|
|
|
struct minstrel_ht_sta_priv *msp = priv_sta;
|
|
|
|
|
|
|
|
kfree(msp->sample_table);
|
|
|
|
kfree(msp->ratelist);
|
|
|
|
kfree(msp);
|
|
|
|
}
|
|
|
|
|
2018-10-07 01:35:01 +08:00
|
|
|
static void
|
|
|
|
minstrel_ht_init_cck_rates(struct minstrel_priv *mp)
|
|
|
|
{
|
|
|
|
static const int bitrates[4] = { 10, 20, 55, 110 };
|
|
|
|
struct ieee80211_supported_band *sband;
|
|
|
|
u32 rate_flags = ieee80211_chandef_rate_flags(&mp->hw->conf.chandef);
|
|
|
|
int i, j;
|
|
|
|
|
|
|
|
sband = mp->hw->wiphy->bands[NL80211_BAND_2GHZ];
|
|
|
|
if (!sband)
|
|
|
|
return;
|
|
|
|
|
|
|
|
for (i = 0; i < sband->n_bitrates; i++) {
|
|
|
|
struct ieee80211_rate *rate = &sband->bitrates[i];
|
|
|
|
|
|
|
|
if (rate->flags & IEEE80211_RATE_ERP_G)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if ((rate_flags & sband->bitrates[i].flags) != rate_flags)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
for (j = 0; j < ARRAY_SIZE(bitrates); j++) {
|
|
|
|
if (rate->bitrate != bitrates[j])
|
|
|
|
continue;
|
|
|
|
|
|
|
|
mp->cck_rates[j] = i;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2010-05-13 22:48:03 +08:00
|
|
|
static void *
|
|
|
|
minstrel_ht_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
|
|
|
|
{
|
2018-10-07 01:35:01 +08:00
|
|
|
struct minstrel_priv *mp;
|
|
|
|
|
|
|
|
mp = kzalloc(sizeof(struct minstrel_priv), GFP_ATOMIC);
|
|
|
|
if (!mp)
|
|
|
|
return NULL;
|
|
|
|
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
mp->sample_switch = -1;
|
|
|
|
|
2018-10-07 01:35:01 +08:00
|
|
|
/* contention window settings
|
|
|
|
* Just an approximation. Using the per-queue values would complicate
|
|
|
|
* the calculations and is probably unnecessary */
|
|
|
|
mp->cw_min = 15;
|
|
|
|
mp->cw_max = 1023;
|
|
|
|
|
|
|
|
/* number of packets (in %) to use for sampling other rates
|
|
|
|
* sample less often for non-mrr packets, because the overhead
|
|
|
|
* is much higher than with mrr */
|
|
|
|
mp->lookaround_rate = 5;
|
|
|
|
mp->lookaround_rate_mrr = 10;
|
|
|
|
|
|
|
|
/* maximum time that the hw is allowed to stay in one MRR segment */
|
|
|
|
mp->segment_size = 6000;
|
|
|
|
|
|
|
|
if (hw->max_rate_tries > 0)
|
|
|
|
mp->max_retry = hw->max_rate_tries;
|
|
|
|
else
|
|
|
|
/* safe default, does not necessarily have to match hw properties */
|
|
|
|
mp->max_retry = 7;
|
|
|
|
|
|
|
|
if (hw->max_rates >= 4)
|
|
|
|
mp->has_mrr = true;
|
|
|
|
|
|
|
|
mp->hw = hw;
|
|
|
|
mp->update_interval = 100;
|
|
|
|
|
|
|
|
#ifdef CONFIG_MAC80211_DEBUGFS
|
|
|
|
mp->fixed_rate_idx = (u32) -1;
|
|
|
|
debugfs_create_u32("fixed_rate_idx", S_IRUGO | S_IWUGO, debugfsdir,
|
|
|
|
&mp->fixed_rate_idx);
|
mac80211: minstrel_ht: improve rate probing for devices with static fallback
On some devices that only support static rate fallback tables sending rate
control probing packets can be really expensive.
Probing lower rates can already hurt throughput quite a bit. What hurts even
more is the fact that on mt76x0/mt76x2, single probing packets can only be
forced by directing packets at a different internal hardware queue, which
causes some heavy reordering and extra latency.
The reordering issue is mainly problematic while pushing lots of packets to
a particular station. If there is little activity, the overhead of probing is
neglegible.
The static fallback behavior is designed to pretty much only handle rate
control algorithms that use only a very limited set of rates on which the
algorithm switches up/down based on packet error rate.
In order to better support that kind of hardware, this patch implements a
different approach to rate probing where it switches to a slightly higher rate,
waits for tx status feedback, then updates the stats and switches back to
the new max throughput rate. This only triggers above a packet rate of 100
per stats interval (~50ms).
For that kind of probing, the code has to reduce the set of probing rates
a lot more compared to single packet probing, so it uses only one packet
per MCS group which is either slightly faster, or as close as possible to
the max throughput rate.
This allows switching between similar rates with different numbers of
streams. The algorithm assumes that the hardware will work its way lower
within an MCS group in case of retransmissions, so that lower rates don't
have to be probed by the high packets per second rate probing code.
To further reduce the search space, it also does not probe rates with lower
channel bandwidth than the max throughput rate.
At the moment, these changes will only affect mt76x0/mt76x2.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20 17:54:49 +08:00
|
|
|
debugfs_create_u32("sample_switch", S_IRUGO | S_IWUSR, debugfsdir,
|
|
|
|
&mp->sample_switch);
|
2018-10-07 01:35:01 +08:00
|
|
|
#endif
|
|
|
|
|
|
|
|
minstrel_ht_init_cck_rates(mp);
|
|
|
|
|
|
|
|
return mp;
|
2010-05-13 22:48:03 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
minstrel_ht_free(void *priv)
|
|
|
|
{
|
2018-10-07 01:35:01 +08:00
|
|
|
kfree(priv);
|
2010-05-13 22:48:03 +08:00
|
|
|
}
|
|
|
|
|
2014-05-20 03:53:20 +08:00
|
|
|
static u32 minstrel_ht_get_expected_throughput(void *priv_sta)
|
|
|
|
{
|
|
|
|
struct minstrel_ht_sta_priv *msp = priv_sta;
|
|
|
|
struct minstrel_ht_sta *mi = &msp->ht;
|
2015-03-25 04:09:41 +08:00
|
|
|
int i, j, prob, tp_avg;
|
2014-05-20 03:53:20 +08:00
|
|
|
|
|
|
|
if (!msp->is_ht)
|
|
|
|
return mac80211_minstrel.get_expected_throughput(priv_sta);
|
|
|
|
|
2014-09-10 05:22:14 +08:00
|
|
|
i = mi->max_tp_rate[0] / MCS_GROUP_RATES;
|
|
|
|
j = mi->max_tp_rate[0] % MCS_GROUP_RATES;
|
2015-03-25 04:09:41 +08:00
|
|
|
prob = mi->groups[i].rates[j].prob_ewma;
|
2014-05-20 03:53:20 +08:00
|
|
|
|
2015-03-25 04:09:40 +08:00
|
|
|
/* convert tp_avg from pkt per second in kbps */
|
2016-02-02 15:12:26 +08:00
|
|
|
tp_avg = minstrel_ht_get_tp_avg(mi, i, j, prob) * 10;
|
|
|
|
tp_avg = tp_avg * AVG_PKT_SIZE * 8 / 1024;
|
2015-03-25 04:09:40 +08:00
|
|
|
|
|
|
|
return tp_avg;
|
2014-05-20 03:53:20 +08:00
|
|
|
}
|
|
|
|
|
2014-01-21 06:29:34 +08:00
|
|
|
static const struct rate_control_ops mac80211_minstrel_ht = {
|
2010-05-13 22:48:03 +08:00
|
|
|
.name = "minstrel_ht",
|
2017-04-26 23:11:35 +08:00
|
|
|
.tx_status_ext = minstrel_ht_tx_status,
|
2010-05-13 22:48:03 +08:00
|
|
|
.get_rate = minstrel_ht_get_rate,
|
|
|
|
.rate_init = minstrel_ht_rate_init,
|
|
|
|
.rate_update = minstrel_ht_rate_update,
|
|
|
|
.alloc_sta = minstrel_ht_alloc_sta,
|
|
|
|
.free_sta = minstrel_ht_free_sta,
|
|
|
|
.alloc = minstrel_ht_alloc,
|
|
|
|
.free = minstrel_ht_free,
|
|
|
|
#ifdef CONFIG_MAC80211_DEBUGFS
|
|
|
|
.add_sta_debugfs = minstrel_ht_add_sta_debugfs,
|
|
|
|
#endif
|
2014-05-20 03:53:20 +08:00
|
|
|
.get_expected_throughput = minstrel_ht_get_expected_throughput,
|
2010-05-13 22:48:03 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
|
2014-01-21 07:32:52 +08:00
|
|
|
static void __init init_sample_table(void)
|
2010-05-13 22:48:03 +08:00
|
|
|
{
|
|
|
|
int col, i, new_idx;
|
|
|
|
u8 rnd[MCS_GROUP_RATES];
|
|
|
|
|
|
|
|
memset(sample_table, 0xff, sizeof(sample_table));
|
|
|
|
for (col = 0; col < SAMPLE_COLUMNS; col++) {
|
2013-11-13 17:54:19 +08:00
|
|
|
prandom_bytes(rnd, sizeof(rnd));
|
2010-05-13 22:48:03 +08:00
|
|
|
for (i = 0; i < MCS_GROUP_RATES; i++) {
|
|
|
|
new_idx = (i + rnd[i]) % MCS_GROUP_RATES;
|
|
|
|
while (sample_table[col][new_idx] != 0xff)
|
|
|
|
new_idx = (new_idx + 1) % MCS_GROUP_RATES;
|
|
|
|
|
|
|
|
sample_table[col][new_idx] = i;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
int __init
|
2018-10-07 01:35:01 +08:00
|
|
|
rc80211_minstrel_init(void)
|
2010-05-13 22:48:03 +08:00
|
|
|
{
|
|
|
|
init_sample_table();
|
|
|
|
return ieee80211_rate_control_register(&mac80211_minstrel_ht);
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
2018-10-07 01:35:01 +08:00
|
|
|
rc80211_minstrel_exit(void)
|
2010-05-13 22:48:03 +08:00
|
|
|
{
|
|
|
|
ieee80211_rate_control_unregister(&mac80211_minstrel_ht);
|
|
|
|
}
|