OpenCloudOS-Kernel/fs/xfs/libxfs/xfs_alloc.c

3820 lines
100 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2000-2002,2005 Silicon Graphics, Inc.
* All Rights Reserved.
*/
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_shared.h"
#include "xfs_trans_resv.h"
#include "xfs_bit.h"
#include "xfs_mount.h"
#include "xfs_defer.h"
#include "xfs_btree.h"
#include "xfs_rmap.h"
#include "xfs_alloc_btree.h"
#include "xfs_alloc.h"
#include "xfs_extent_busy.h"
#include "xfs_errortag.h"
#include "xfs_error.h"
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-15 07:14:59 +08:00
#include "xfs_trace.h"
#include "xfs_trans.h"
#include "xfs_buf_item.h"
#include "xfs_log.h"
#include "xfs_ag.h"
xfs: set up per-AG free space reservations One unfortunate quirk of the reference count and reverse mapping btrees -- they can expand in size when blocks are written to *other* allocation groups if, say, one large extent becomes a lot of tiny extents. Since we don't want to start throwing errors in the middle of CoWing, we need to reserve some blocks to handle future expansion. The transaction block reservation counters aren't sufficient here because we have to have a reserve of blocks in every AG, not just somewhere in the filesystem. Therefore, create two per-AG block reservation pools. One feeds the AGFL so that rmapbt expansion always succeeds, and the other feeds all other metadata so that refcountbt expansion never fails. Use the count of how many reserved blocks we need to have on hand to create a virtual reservation in the AG. Through selective clamping of the maximum length of allocation requests and of the length of the longest free extent, we can make it look like there's less free space in the AG unless the reservation owner is asking for blocks. In other words, play some accounting tricks in-core to make sure that we always have blocks available. On the plus side, there's nothing to clean up if we crash, which is contrast to the strategy that the rough draft used (actually removing extents from the freespace btrees). Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-09-19 08:30:52 +08:00
#include "xfs_ag_resv.h"
xfs: defer agfl block frees when dfops is available The AGFL fixup code executes before every block allocation/free and rectifies the AGFL based on the current, dynamic allocation requirements of the fs. The AGFL must hold a minimum number of blocks to satisfy a worst case split of the free space btrees caused by the impending allocation operation. The AGFL is also updated to maintain the implicit requirement for a minimum number of free slots to satisfy a worst case join of the free space btrees. Since the AGFL caches individual blocks, AGFL reduction typically involves multiple, single block frees. We've had reports of transaction overrun problems during certain workloads that boil down to AGFL reduction freeing multiple blocks and consuming more space in the log than was reserved for the transaction. Since the objective of freeing AGFL blocks is to ensure free AGFL free slots are available for the upcoming allocation, one way to address this problem is to release surplus blocks from the AGFL immediately but defer the free of those blocks (similar to how file-mapped blocks are unmapped from the file in one transaction and freed via a deferred operation) until the transaction is rolled. This turns AGFL reduction into an operation with predictable log reservation consumption. Add the capability to defer AGFL block frees when a deferred ops list is available to the AGFL fixup code. Add a dfops pointer to the transaction to carry dfops through various contexts to the allocator context. Deferring AGFL frees is conditional behavior based on whether the transaction pointer is populated. The long term objective is to reuse the transaction pointer to clean up all unrelated callchains that pass dfops on the stack along with a transaction and in doing so, consistently defer AGFL blocks from the allocator. A bit of customization is required to handle deferred completion processing because AGFL blocks are accounted against a per-ag reservation pool and AGFL blocks are not inserted into the extent busy list when freed (they are inserted when used and released back to the AGFL). Reuse the majority of the existing deferred extent free infrastructure and customize it appropriately to handle AGFL blocks. Note that this patch only adds infrastructure. It does not change behavior because no callers have been updated to pass ->t_agfl_dfops into the allocation code. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-08 08:38:47 +08:00
#include "xfs_bmap.h"
struct kmem_cache *xfs_extfree_item_cache;
struct workqueue_struct *xfs_alloc_wq;
#define XFS_ABSDIFF(a,b) (((a) <= (b)) ? ((b) - (a)) : ((a) - (b)))
#define XFSA_FIXUP_BNO_OK 1
#define XFSA_FIXUP_CNT_OK 2
/*
* Size of the AGFL. For CRC-enabled filesystes we steal a couple of slots in
* the beginning of the block for a proper header with the location information
* and CRC.
*/
unsigned int
xfs_agfl_size(
struct xfs_mount *mp)
{
unsigned int size = mp->m_sb.sb_sectsize;
if (xfs_has_crc(mp))
size -= sizeof(struct xfs_agfl);
return size / sizeof(xfs_agblock_t);
}
unsigned int
xfs_refc_block(
struct xfs_mount *mp)
{
if (xfs_has_rmapbt(mp))
return XFS_RMAP_BLOCK(mp) + 1;
if (xfs_has_finobt(mp))
return XFS_FIBT_BLOCK(mp) + 1;
return XFS_IBT_BLOCK(mp) + 1;
}
xfs_extlen_t
xfs_prealloc_blocks(
struct xfs_mount *mp)
{
if (xfs_has_reflink(mp))
return xfs_refc_block(mp) + 1;
if (xfs_has_rmapbt(mp))
return XFS_RMAP_BLOCK(mp) + 1;
if (xfs_has_finobt(mp))
return XFS_FIBT_BLOCK(mp) + 1;
return XFS_IBT_BLOCK(mp) + 1;
}
/*
* The number of blocks per AG that we withhold from xfs_mod_fdblocks to
* guarantee that we can refill the AGFL prior to allocating space in a nearly
* full AG. Although the space described by the free space btrees, the
* blocks used by the freesp btrees themselves, and the blocks owned by the
* AGFL are counted in the ondisk fdblocks, it's a mistake to let the ondisk
* free space in the AG drop so low that the free space btrees cannot refill an
* empty AGFL up to the minimum level. Rather than grind through empty AGs
* until the fs goes down, we subtract this many AG blocks from the incore
* fdblocks to ensure user allocation does not overcommit the space the
* filesystem needs for the AGFLs. The rmap btree uses a per-AG reservation to
* withhold space from xfs_mod_fdblocks, so we do not account for that here.
*/
#define XFS_ALLOCBT_AGFL_RESERVE 4
/*
* Compute the number of blocks that we set aside to guarantee the ability to
* refill the AGFL and handle a full bmap btree split.
*
* In order to avoid ENOSPC-related deadlock caused by out-of-order locking of
* AGF buffer (PV 947395), we place constraints on the relationship among
* actual allocations for data blocks, freelist blocks, and potential file data
* bmap btree blocks. However, these restrictions may result in no actual space
* allocated for a delayed extent, for example, a data block in a certain AG is
* allocated but there is no additional block for the additional bmap btree
* block due to a split of the bmap btree of the file. The result of this may
* lead to an infinite loop when the file gets flushed to disk and all delayed
* extents need to be actually allocated. To get around this, we explicitly set
* aside a few blocks which will not be reserved in delayed allocation.
*
* For each AG, we need to reserve enough blocks to replenish a totally empty
* AGFL and 4 more to handle a potential split of the file's bmap btree.
*/
unsigned int
xfs_alloc_set_aside(
struct xfs_mount *mp)
{
return mp->m_sb.sb_agcount * (XFS_ALLOCBT_AGFL_RESERVE + 4);
}
/*
* When deciding how much space to allocate out of an AG, we limit the
* allocation maximum size to the size the AG. However, we cannot use all the
* blocks in the AG - some are permanently used by metadata. These
* blocks are generally:
* - the AG superblock, AGF, AGI and AGFL
* - the AGF (bno and cnt) and AGI btree root blocks, and optionally
* the AGI free inode and rmap btree root blocks.
* - blocks on the AGFL according to xfs_alloc_set_aside() limits
* - the rmapbt root block
*
* The AG headers are sector sized, so the amount of space they take up is
* dependent on filesystem geometry. The others are all single blocks.
*/
unsigned int
xfs_alloc_ag_max_usable(
struct xfs_mount *mp)
{
unsigned int blocks;
blocks = XFS_BB_TO_FSB(mp, XFS_FSS_TO_BB(mp, 4)); /* ag headers */
blocks += XFS_ALLOCBT_AGFL_RESERVE;
blocks += 3; /* AGF, AGI btree root blocks */
if (xfs_has_finobt(mp))
blocks++; /* finobt root block */
if (xfs_has_rmapbt(mp))
blocks++; /* rmap root block */
if (xfs_has_reflink(mp))
blocks++; /* refcount root block */
return mp->m_sb.sb_agblocks - blocks;
}
/*
* Lookup the record equal to [bno, len] in the btree given by cur.
*/
STATIC int /* error */
xfs_alloc_lookup_eq(
struct xfs_btree_cur *cur, /* btree cursor */
xfs_agblock_t bno, /* starting block of extent */
xfs_extlen_t len, /* length of extent */
int *stat) /* success/failure */
{
int error;
cur->bc_rec.a.ar_startblock = bno;
cur->bc_rec.a.ar_blockcount = len;
error = xfs_btree_lookup(cur, XFS_LOOKUP_EQ, stat);
cur->bc_ag.abt.active = (*stat == 1);
return error;
}
/*
* Lookup the first record greater than or equal to [bno, len]
* in the btree given by cur.
*/
xfs: fix fstrim offset calculations xfs_ioc_fstrim() doesn't treat the incoming offset and length correctly. It treats them as a filesystem block address, rather than a disk address. This is wrong because the range passed in is a linear representation, while the filesystem block address notation is a sparse representation. Hence we cannot convert the range direct to filesystem block units and then use that for calculating the range to trim. While this sounds dangerous, the problem is limited to calculating what AGs need to be trimmed. The code that calcuates the actual ranges to trim gets the right result (i.e. only ever discards free space), even though it uses the wrong ranges to limit what is trimmed. Hence this is not a bug that endangers user data. Fix this by treating the range as a disk address range and use the appropriate functions to convert the range into the desired formats for calculations. Further, fix the first free extent lookup (the longest) to actually find the largest free extent. Currently this lookup uses a <= lookup, which results in finding the extent to the left of the largest because we can never get an exact match on the largest extent. This is due to the fact that while we know it's size, we don't know it's location and so the exact match fails and we move one record to the left to get the next largest extent. Instead, use a >= search so that the lookup returns the largest extent regardless of the fact we don't get an exact match on it. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-03-22 13:15:12 +08:00
int /* error */
xfs_alloc_lookup_ge(
struct xfs_btree_cur *cur, /* btree cursor */
xfs_agblock_t bno, /* starting block of extent */
xfs_extlen_t len, /* length of extent */
int *stat) /* success/failure */
{
int error;
cur->bc_rec.a.ar_startblock = bno;
cur->bc_rec.a.ar_blockcount = len;
error = xfs_btree_lookup(cur, XFS_LOOKUP_GE, stat);
cur->bc_ag.abt.active = (*stat == 1);
return error;
}
/*
* Lookup the first record less than or equal to [bno, len]
* in the btree given by cur.
*/
int /* error */
xfs_alloc_lookup_le(
struct xfs_btree_cur *cur, /* btree cursor */
xfs_agblock_t bno, /* starting block of extent */
xfs_extlen_t len, /* length of extent */
int *stat) /* success/failure */
{
int error;
cur->bc_rec.a.ar_startblock = bno;
cur->bc_rec.a.ar_blockcount = len;
error = xfs_btree_lookup(cur, XFS_LOOKUP_LE, stat);
cur->bc_ag.abt.active = (*stat == 1);
return error;
}
static inline bool
xfs_alloc_cur_active(
struct xfs_btree_cur *cur)
{
return cur && cur->bc_ag.abt.active;
}
/*
* Update the record referred to by cur to the value given
* by [bno, len].
* This either works (return 0) or gets an EFSCORRUPTED error.
*/
STATIC int /* error */
xfs_alloc_update(
struct xfs_btree_cur *cur, /* btree cursor */
xfs_agblock_t bno, /* starting block of extent */
xfs_extlen_t len) /* length of extent */
{
union xfs_btree_rec rec;
rec.alloc.ar_startblock = cpu_to_be32(bno);
rec.alloc.ar_blockcount = cpu_to_be32(len);
return xfs_btree_update(cur, &rec);
}
/* Convert the ondisk btree record to its incore representation. */
void
xfs_alloc_btrec_to_irec(
const union xfs_btree_rec *rec,
struct xfs_alloc_rec_incore *irec)
{
irec->ar_startblock = be32_to_cpu(rec->alloc.ar_startblock);
irec->ar_blockcount = be32_to_cpu(rec->alloc.ar_blockcount);
}
/* Simple checks for free space records. */
xfs_failaddr_t
xfs_alloc_check_irec(
struct xfs_btree_cur *cur,
const struct xfs_alloc_rec_incore *irec)
{
struct xfs_perag *pag = cur->bc_ag.pag;
if (irec->ar_blockcount == 0)
return __this_address;
/* check for valid extent range, including overflow */
if (!xfs_verify_agbext(pag, irec->ar_startblock, irec->ar_blockcount))
return __this_address;
return NULL;
}
static inline int
xfs_alloc_complain_bad_rec(
struct xfs_btree_cur *cur,
xfs_failaddr_t fa,
const struct xfs_alloc_rec_incore *irec)
{
struct xfs_mount *mp = cur->bc_mp;
xfs_warn(mp,
"%s Freespace BTree record corruption in AG %d detected at %pS!",
cur->bc_btnum == XFS_BTNUM_BNO ? "Block" : "Size",
cur->bc_ag.pag->pag_agno, fa);
xfs_warn(mp,
"start block 0x%x block count 0x%x", irec->ar_startblock,
irec->ar_blockcount);
return -EFSCORRUPTED;
}
/*
* Get the data from the pointed-to record.
*/
int /* error */
xfs_alloc_get_rec(
struct xfs_btree_cur *cur, /* btree cursor */
xfs_agblock_t *bno, /* output: starting block of extent */
xfs_extlen_t *len, /* output: length of extent */
int *stat) /* output: success/failure */
{
struct xfs_alloc_rec_incore irec;
union xfs_btree_rec *rec;
xfs_failaddr_t fa;
int error;
error = xfs_btree_get_rec(cur, &rec, stat);
if (error || !(*stat))
return error;
xfs_alloc_btrec_to_irec(rec, &irec);
fa = xfs_alloc_check_irec(cur, &irec);
if (fa)
return xfs_alloc_complain_bad_rec(cur, fa, &irec);
xfs: validate btree records on retrieval So we don't check the validity of records as we walk the btree. When there are corrupt records in the free space btree (e.g. zero startblock/length or beyond EOAG) we just blindly use it and things go bad from there. That leads to assert failures on debug kernels like this: XFS: Assertion failed: fs_is_ok, file: fs/xfs/libxfs/xfs_alloc.c, line: 450 .... Call Trace: xfs_alloc_fixup_trees+0x368/0x5c0 xfs_alloc_ag_vextent_near+0x79a/0xe20 xfs_alloc_ag_vextent+0x1d3/0x330 xfs_alloc_vextent+0x5e9/0x870 Or crashes like this: XFS (loop0): xfs_buf_find: daddr 0x7fb28 out of range, EOFS 0x8000 ..... BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8 .... Call Trace: xfs_bmap_add_extent_hole_real+0x67d/0x930 xfs_bmapi_write+0x934/0xc90 xfs_da_grow_inode_int+0x27e/0x2f0 xfs_dir2_grow_inode+0x55/0x130 xfs_dir2_sf_to_block+0x94/0x5d0 xfs_dir2_sf_addname+0xd0/0x590 xfs_dir_createname+0x168/0x1a0 xfs_rename+0x658/0x9b0 By checking that free space records pulled from the trees are within the valid range, we catch many of these corruptions before they can do damage. This is a generic btree record checking deficiency. We need to validate the records we fetch from all the different btrees before we use them to catch corruptions like this. This patch results in a corrupt record emitting an error message and returning -EFSCORRUPTED, and the higher layers catch that and abort: XFS (loop0): Size Freespace BTree record corruption in AG 0 detected! XFS (loop0): start block 0x0 block count 0x0 XFS (loop0): Internal error xfs_trans_cancel at line 1012 of file fs/xfs/xfs_trans.c. Caller xfs_create+0x42a/0x670 ..... Call Trace: dump_stack+0x85/0xcb xfs_trans_cancel+0x19f/0x1c0 xfs_create+0x42a/0x670 xfs_generic_create+0x1f6/0x2c0 vfs_create+0xf9/0x180 do_mknodat+0x1f9/0x210 do_syscall_64+0x5a/0x180 entry_SYSCALL_64_after_hwframe+0x49/0xbe ..... XFS (loop0): xfs_do_force_shutdown(0x8) called from line 1013 of file fs/xfs/xfs_trans.c. Return address = ffffffff81500868 XFS (loop0): Corruption of in-memory data detected. Shutting down filesystem Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-06 10:42:13 +08:00
*bno = irec.ar_startblock;
*len = irec.ar_blockcount;
xfs: validate btree records on retrieval So we don't check the validity of records as we walk the btree. When there are corrupt records in the free space btree (e.g. zero startblock/length or beyond EOAG) we just blindly use it and things go bad from there. That leads to assert failures on debug kernels like this: XFS: Assertion failed: fs_is_ok, file: fs/xfs/libxfs/xfs_alloc.c, line: 450 .... Call Trace: xfs_alloc_fixup_trees+0x368/0x5c0 xfs_alloc_ag_vextent_near+0x79a/0xe20 xfs_alloc_ag_vextent+0x1d3/0x330 xfs_alloc_vextent+0x5e9/0x870 Or crashes like this: XFS (loop0): xfs_buf_find: daddr 0x7fb28 out of range, EOFS 0x8000 ..... BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8 .... Call Trace: xfs_bmap_add_extent_hole_real+0x67d/0x930 xfs_bmapi_write+0x934/0xc90 xfs_da_grow_inode_int+0x27e/0x2f0 xfs_dir2_grow_inode+0x55/0x130 xfs_dir2_sf_to_block+0x94/0x5d0 xfs_dir2_sf_addname+0xd0/0x590 xfs_dir_createname+0x168/0x1a0 xfs_rename+0x658/0x9b0 By checking that free space records pulled from the trees are within the valid range, we catch many of these corruptions before they can do damage. This is a generic btree record checking deficiency. We need to validate the records we fetch from all the different btrees before we use them to catch corruptions like this. This patch results in a corrupt record emitting an error message and returning -EFSCORRUPTED, and the higher layers catch that and abort: XFS (loop0): Size Freespace BTree record corruption in AG 0 detected! XFS (loop0): start block 0x0 block count 0x0 XFS (loop0): Internal error xfs_trans_cancel at line 1012 of file fs/xfs/xfs_trans.c. Caller xfs_create+0x42a/0x670 ..... Call Trace: dump_stack+0x85/0xcb xfs_trans_cancel+0x19f/0x1c0 xfs_create+0x42a/0x670 xfs_generic_create+0x1f6/0x2c0 vfs_create+0xf9/0x180 do_mknodat+0x1f9/0x210 do_syscall_64+0x5a/0x180 entry_SYSCALL_64_after_hwframe+0x49/0xbe ..... XFS (loop0): xfs_do_force_shutdown(0x8) called from line 1013 of file fs/xfs/xfs_trans.c. Return address = ffffffff81500868 XFS (loop0): Corruption of in-memory data detected. Shutting down filesystem Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-06 10:42:13 +08:00
return 0;
}
/*
* Compute aligned version of the found extent.
* Takes alignment and min length into account.
*/
STATIC bool
xfs_alloc_compute_aligned(
xfs_alloc_arg_t *args, /* allocation argument structure */
xfs_agblock_t foundbno, /* starting block in found extent */
xfs_extlen_t foundlen, /* length in found extent */
xfs_agblock_t *resbno, /* result block number */
xfs_extlen_t *reslen, /* result length */
unsigned *busy_gen)
{
xfs_agblock_t bno = foundbno;
xfs_extlen_t len = foundlen;
xfs: support min/max agbno args in block allocator The block allocator supports various arguments to tweak block allocation behavior and set allocation requirements. The sparse inode chunk feature introduces a new requirement not supported by the current arguments. Sparse inode allocations must convert or merge into an inode record that describes a fixed length chunk (64 inodes x inodesize). Full inode chunk allocations by definition always result in valid inode records. Sparse chunk allocations are smaller and the associated records can refer to blocks not owned by the inode chunk. This model can result in invalid inode records in certain cases. For example, if a sparse allocation occurs near the start of an AG, the aligned inode record for that chunk might refer to agbno 0. If an allocation occurs towards the end of the AG and the AG size is not aligned, the inode record could refer to blocks beyond the end of the AG. While neither of these scenarios directly result in corruption, they both insert invalid inode records and at minimum cause repair to complain, are unlikely to merge into full chunks over time and set land mines for other areas of code. To guarantee sparse inode chunk allocation creates valid inode records, support the ability to specify an agbno range limit for XFS_ALLOCTYPE_NEAR_BNO block allocations. The min/max agbno's are specified in the allocation arguments and limit the block allocation algorithms to that range. The starting 'agbno' hint is clamped to the range if the specified agbno is out of range. If no sufficient extent is available within the range, the allocation fails. For backwards compatibility, the min/max fields can be initialized to 0 to disable range limiting (e.g., equivalent to min=0,max=agsize). Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-05-29 06:53:00 +08:00
xfs_extlen_t diff;
bool busy;
/* Trim busy sections out of found extent */
busy = xfs_extent_busy_trim(args, &bno, &len, busy_gen);
xfs: support min/max agbno args in block allocator The block allocator supports various arguments to tweak block allocation behavior and set allocation requirements. The sparse inode chunk feature introduces a new requirement not supported by the current arguments. Sparse inode allocations must convert or merge into an inode record that describes a fixed length chunk (64 inodes x inodesize). Full inode chunk allocations by definition always result in valid inode records. Sparse chunk allocations are smaller and the associated records can refer to blocks not owned by the inode chunk. This model can result in invalid inode records in certain cases. For example, if a sparse allocation occurs near the start of an AG, the aligned inode record for that chunk might refer to agbno 0. If an allocation occurs towards the end of the AG and the AG size is not aligned, the inode record could refer to blocks beyond the end of the AG. While neither of these scenarios directly result in corruption, they both insert invalid inode records and at minimum cause repair to complain, are unlikely to merge into full chunks over time and set land mines for other areas of code. To guarantee sparse inode chunk allocation creates valid inode records, support the ability to specify an agbno range limit for XFS_ALLOCTYPE_NEAR_BNO block allocations. The min/max agbno's are specified in the allocation arguments and limit the block allocation algorithms to that range. The starting 'agbno' hint is clamped to the range if the specified agbno is out of range. If no sufficient extent is available within the range, the allocation fails. For backwards compatibility, the min/max fields can be initialized to 0 to disable range limiting (e.g., equivalent to min=0,max=agsize). Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-05-29 06:53:00 +08:00
/*
* If we have a largish extent that happens to start before min_agbno,
* see if we can shift it into range...
*/
if (bno < args->min_agbno && bno + len > args->min_agbno) {
diff = args->min_agbno - bno;
if (len > diff) {
bno += diff;
len -= diff;
}
}
if (args->alignment > 1 && len >= args->minlen) {
xfs_agblock_t aligned_bno = roundup(bno, args->alignment);
xfs: support min/max agbno args in block allocator The block allocator supports various arguments to tweak block allocation behavior and set allocation requirements. The sparse inode chunk feature introduces a new requirement not supported by the current arguments. Sparse inode allocations must convert or merge into an inode record that describes a fixed length chunk (64 inodes x inodesize). Full inode chunk allocations by definition always result in valid inode records. Sparse chunk allocations are smaller and the associated records can refer to blocks not owned by the inode chunk. This model can result in invalid inode records in certain cases. For example, if a sparse allocation occurs near the start of an AG, the aligned inode record for that chunk might refer to agbno 0. If an allocation occurs towards the end of the AG and the AG size is not aligned, the inode record could refer to blocks beyond the end of the AG. While neither of these scenarios directly result in corruption, they both insert invalid inode records and at minimum cause repair to complain, are unlikely to merge into full chunks over time and set land mines for other areas of code. To guarantee sparse inode chunk allocation creates valid inode records, support the ability to specify an agbno range limit for XFS_ALLOCTYPE_NEAR_BNO block allocations. The min/max agbno's are specified in the allocation arguments and limit the block allocation algorithms to that range. The starting 'agbno' hint is clamped to the range if the specified agbno is out of range. If no sufficient extent is available within the range, the allocation fails. For backwards compatibility, the min/max fields can be initialized to 0 to disable range limiting (e.g., equivalent to min=0,max=agsize). Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-05-29 06:53:00 +08:00
diff = aligned_bno - bno;
*resbno = aligned_bno;
*reslen = diff >= len ? 0 : len - diff;
} else {
*resbno = bno;
*reslen = len;
}
return busy;
}
/*
* Compute best start block and diff for "near" allocations.
* freelen >= wantlen already checked by caller.
*/
STATIC xfs_extlen_t /* difference value (absolute) */
xfs_alloc_compute_diff(
xfs_agblock_t wantbno, /* target starting block */
xfs_extlen_t wantlen, /* target length */
xfs_extlen_t alignment, /* target alignment */
xfs: remote attribute blocks aren't really userdata When adding a new remote attribute, we write the attribute to the new extent before the allocation transaction is committed. This means we cannot reuse busy extents as that violates crash consistency semantics. Hence we currently treat remote attribute extent allocation like userdata because it has the same overwrite ordering constraints as userdata. Unfortunately, this also allows the allocator to incorrectly apply extent size hints to the remote attribute extent allocation. This results in interesting failures, such as transaction block reservation overruns and in-memory inode attribute fork corruption. To fix this, we need to separate the busy extent reuse configuration from the userdata configuration. This changes the definition of XFS_BMAPI_METADATA slightly - it now means that allocation is metadata and reuse of busy extents is acceptible due to the metadata ordering semantics of the journal. If this flag is not set, it means the allocation is that has unordered data writeback, and hence busy extent reuse is not allowed. It no longer implies the allocation is for user data, just that the data write will not be strictly ordered. This matches the semantics for both user data and remote attribute block allocation. As such, This patch changes the "userdata" field to a "datatype" field, and adds a "no busy reuse" flag to the field. When we detect an unordered data extent allocation, we immediately set the no reuse flag. We then set the "user data" flags based on the inode fork we are allocating the extent to. Hence we only set userdata flags on data fork allocations now and consider attribute fork remote extents to be an unordered metadata extent. The result is that remote attribute extents now have the expected allocation semantics, and the data fork allocation behaviour is completely unchanged. It should be noted that there may be other ways to fix this (e.g. use ordered metadata buffers for the remote attribute extent data write) but they are more invasive and difficult to validate both from a design and implementation POV. Hence this patch takes the simple, obvious route to fixing the problem... Reported-and-tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-09-26 06:21:28 +08:00
int datatype, /* are we allocating data? */
xfs_agblock_t freebno, /* freespace's starting block */
xfs_extlen_t freelen, /* freespace's length */
xfs_agblock_t *newbnop) /* result: best start block from free */
{
xfs_agblock_t freeend; /* end of freespace extent */
xfs_agblock_t newbno1; /* return block number */
xfs_agblock_t newbno2; /* other new block number */
xfs_extlen_t newlen1=0; /* length with newbno1 */
xfs_extlen_t newlen2=0; /* length with newbno2 */
xfs_agblock_t wantend; /* end of target extent */
bool userdata = datatype & XFS_ALLOC_USERDATA;
ASSERT(freelen >= wantlen);
freeend = freebno + freelen;
wantend = wantbno + wantlen;
xfs: Avoid pathological backwards allocation Writing a large file using direct IO in 16 MB chunks sometimes results in a pathological allocation pattern where 16 MB chunks of large free extent are allocated to a file in a reversed order. So extents of a file look for example as: ext logical physical expected length flags 0 0 13 4550656 1 4550656 188136807 4550668 12562432 2 17113088 200699240 200699238 622592 3 17735680 182046055 201321831 4096 4 17739776 182041959 182050150 4096 5 17743872 182037863 182046054 4096 6 17747968 182033767 182041958 4096 7 17752064 182029671 182037862 4096 ... 6757 45400064 154381644 154389835 4096 6758 45404160 154377548 154385739 4096 6759 45408256 252951571 154381643 73728 eof This happens because XFS_ALLOCTYPE_THIS_BNO allocation fails (the last extent in the file cannot be further extended) so we fall back to XFS_ALLOCTYPE_NEAR_BNO allocation which picks end of a large free extent as the best place to continue the file. Since the chunk at the end of the free extent again cannot be further extended, this behavior repeats until the whole free extent is consumed in a reversed order. For data allocations this backward allocation isn't beneficial so make xfs_alloc_compute_diff() pick start of a free extent instead of its end for them. That avoids the backward allocation pattern. See thread at http://oss.sgi.com/archives/xfs/2013-03/msg00144.html for more details about the reproduction case and why this solution was chosen. Based on idea by Dave Chinner <dchinner@redhat.com>. CC: Dave Chinner <dchinner@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-12 04:09:56 +08:00
/*
* We want to allocate from the start of a free extent if it is past
* the desired block or if we are allocating user data and the free
* extent is before desired block. The second case is there to allow
* for contiguous allocation from the remaining free space if the file
* grows in the short term.
*/
if (freebno >= wantbno || (userdata && freeend < wantend)) {
if ((newbno1 = roundup(freebno, alignment)) >= freeend)
newbno1 = NULLAGBLOCK;
} else if (freeend >= wantend && alignment > 1) {
newbno1 = roundup(wantbno, alignment);
newbno2 = newbno1 - alignment;
if (newbno1 >= freeend)
newbno1 = NULLAGBLOCK;
else
newlen1 = XFS_EXTLEN_MIN(wantlen, freeend - newbno1);
if (newbno2 < freebno)
newbno2 = NULLAGBLOCK;
else
newlen2 = XFS_EXTLEN_MIN(wantlen, freeend - newbno2);
if (newbno1 != NULLAGBLOCK && newbno2 != NULLAGBLOCK) {
if (newlen1 < newlen2 ||
(newlen1 == newlen2 &&
XFS_ABSDIFF(newbno1, wantbno) >
XFS_ABSDIFF(newbno2, wantbno)))
newbno1 = newbno2;
} else if (newbno2 != NULLAGBLOCK)
newbno1 = newbno2;
} else if (freeend >= wantend) {
newbno1 = wantbno;
} else if (alignment > 1) {
newbno1 = roundup(freeend - wantlen, alignment);
if (newbno1 > freeend - wantlen &&
newbno1 - alignment >= freebno)
newbno1 -= alignment;
else if (newbno1 >= freeend)
newbno1 = NULLAGBLOCK;
} else
newbno1 = freeend - wantlen;
*newbnop = newbno1;
return newbno1 == NULLAGBLOCK ? 0 : XFS_ABSDIFF(newbno1, wantbno);
}
/*
* Fix up the length, based on mod and prod.
* len should be k * prod + mod for some k.
* If len is too small it is returned unchanged.
* If len hits maxlen it is left alone.
*/
STATIC void
xfs_alloc_fix_len(
xfs_alloc_arg_t *args) /* allocation argument structure */
{
xfs_extlen_t k;
xfs_extlen_t rlen;
ASSERT(args->mod < args->prod);
rlen = args->len;
ASSERT(rlen >= args->minlen);
ASSERT(rlen <= args->maxlen);
if (args->prod <= 1 || rlen < args->mod || rlen == args->maxlen ||
(args->mod == 0 && rlen < args->prod))
return;
k = rlen % args->prod;
if (k == args->mod)
return;
if (k > args->mod)
rlen = rlen - (k - args->mod);
else
rlen = rlen - args->prod + (args->mod - k);
xfs: xfs_alloc_fix_minleft can underflow near ENOSPC Test generic/224 is failing with a corruption being detected on one of Michael's test boxes. Debug that Michael added is indicating that the minleft trimming is resulting in an underflow: ..... before fixup: rlen 1 args->len 0 after xfs_alloc_fix_len : rlen 1 args->len 1 before goto out_nominleft: rlen 1 args->len 0 before fixup: rlen 1 args->len 0 after xfs_alloc_fix_len : rlen 1 args->len 1 after fixup: rlen 1 args->len 1 before fixup: rlen 1 args->len 0 after xfs_alloc_fix_len : rlen 1 args->len 1 after fixup: rlen 4294967295 args->len 4294967295 XFS: Assertion failed: fs_is_ok, file: fs/xfs/libxfs/xfs_alloc.c, line: 1424 The "goto out_nominleft:" indicates that we are getting close to ENOSPC in the AG, and a couple of allocations later we underflow and the corruption check fires in xfs_alloc_ag_vextent_size(). The issue is that the extent length fixups comaprisons are done with variables of xfs_extlen_t types. These are unsigned so an underflow looks like a really big value and hence is not detected as being smaller than the minimum length allowed for the extent. Hence the corruption check fires as it is noticing that the returned length is longer than the original extent length passed in. This can be easily fixed by ensuring we do the underflow test on signed values, the same way xfs_alloc_fix_len() prevents underflow. So we realise in future that these casts prevent underflows from going undetected, add comments to the code indicating this. Reported-by: Michael L. Semon <mlsemon35@gmail.com> Tested-by: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-24 07:16:04 +08:00
/* casts to (int) catch length underflows */
if ((int)rlen < (int)args->minlen)
return;
ASSERT(rlen >= args->minlen && rlen <= args->maxlen);
ASSERT(rlen % args->prod == args->mod);
ASSERT(args->pag->pagf_freeblks + args->pag->pagf_flcount >=
rlen + args->minleft);
args->len = rlen;
}
/*
* Update the two btrees, logically removing from freespace the extent
* starting at rbno, rlen blocks. The extent is contained within the
* actual (current) free extent fbno for flen blocks.
* Flags are passed in indicating whether the cursors are set to the
* relevant records.
*/
STATIC int /* error code */
xfs_alloc_fixup_trees(
struct xfs_btree_cur *cnt_cur, /* cursor for by-size btree */
struct xfs_btree_cur *bno_cur, /* cursor for by-block btree */
xfs_agblock_t fbno, /* starting block of free extent */
xfs_extlen_t flen, /* length of free extent */
xfs_agblock_t rbno, /* starting block of returned extent */
xfs_extlen_t rlen, /* length of returned extent */
int flags) /* flags, XFSA_FIXUP_... */
{
int error; /* error code */
int i; /* operation results */
xfs_agblock_t nfbno1; /* first new free startblock */
xfs_agblock_t nfbno2; /* second new free startblock */
xfs_extlen_t nflen1=0; /* first new free length */
xfs_extlen_t nflen2=0; /* second new free length */
struct xfs_mount *mp;
mp = cnt_cur->bc_mp;
/*
* Look up the record in the by-size tree if necessary.
*/
if (flags & XFSA_FIXUP_CNT_OK) {
#ifdef DEBUG
if ((error = xfs_alloc_get_rec(cnt_cur, &nfbno1, &nflen1, &i)))
return error;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp,
i != 1 ||
nfbno1 != fbno ||
nflen1 != flen))
return -EFSCORRUPTED;
#endif
} else {
if ((error = xfs_alloc_lookup_eq(cnt_cur, fbno, flen, &i)))
return error;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 1))
return -EFSCORRUPTED;
}
/*
* Look up the record in the by-block tree if necessary.
*/
if (flags & XFSA_FIXUP_BNO_OK) {
#ifdef DEBUG
if ((error = xfs_alloc_get_rec(bno_cur, &nfbno1, &nflen1, &i)))
return error;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp,
i != 1 ||
nfbno1 != fbno ||
nflen1 != flen))
return -EFSCORRUPTED;
#endif
} else {
if ((error = xfs_alloc_lookup_eq(bno_cur, fbno, flen, &i)))
return error;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 1))
return -EFSCORRUPTED;
}
#ifdef DEBUG
if (bno_cur->bc_nlevels == 1 && cnt_cur->bc_nlevels == 1) {
struct xfs_btree_block *bnoblock;
struct xfs_btree_block *cntblock;
bnoblock = XFS_BUF_TO_BLOCK(bno_cur->bc_levels[0].bp);
cntblock = XFS_BUF_TO_BLOCK(cnt_cur->bc_levels[0].bp);
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp,
bnoblock->bb_numrecs !=
cntblock->bb_numrecs))
return -EFSCORRUPTED;
}
#endif
/*
* Deal with all four cases: the allocated record is contained
* within the freespace record, so we can have new freespace
* at either (or both) end, or no freespace remaining.
*/
if (rbno == fbno && rlen == flen)
nfbno1 = nfbno2 = NULLAGBLOCK;
else if (rbno == fbno) {
nfbno1 = rbno + rlen;
nflen1 = flen - rlen;
nfbno2 = NULLAGBLOCK;
} else if (rbno + rlen == fbno + flen) {
nfbno1 = fbno;
nflen1 = flen - rlen;
nfbno2 = NULLAGBLOCK;
} else {
nfbno1 = fbno;
nflen1 = rbno - fbno;
nfbno2 = rbno + rlen;
nflen2 = (fbno + flen) - nfbno2;
}
/*
* Delete the entry from the by-size btree.
*/
if ((error = xfs_btree_delete(cnt_cur, &i)))
return error;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 1))
return -EFSCORRUPTED;
/*
* Add new by-size btree entry(s).
*/
if (nfbno1 != NULLAGBLOCK) {
if ((error = xfs_alloc_lookup_eq(cnt_cur, nfbno1, nflen1, &i)))
return error;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 0))
return -EFSCORRUPTED;
if ((error = xfs_btree_insert(cnt_cur, &i)))
return error;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 1))
return -EFSCORRUPTED;
}
if (nfbno2 != NULLAGBLOCK) {
if ((error = xfs_alloc_lookup_eq(cnt_cur, nfbno2, nflen2, &i)))
return error;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 0))
return -EFSCORRUPTED;
if ((error = xfs_btree_insert(cnt_cur, &i)))
return error;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 1))
return -EFSCORRUPTED;
}
/*
* Fix up the by-block btree entry(s).
*/
if (nfbno1 == NULLAGBLOCK) {
/*
* No remaining freespace, just delete the by-block tree entry.
*/
if ((error = xfs_btree_delete(bno_cur, &i)))
return error;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 1))
return -EFSCORRUPTED;
} else {
/*
* Update the by-block entry to start later|be shorter.
*/
if ((error = xfs_alloc_update(bno_cur, nfbno1, nflen1)))
return error;
}
if (nfbno2 != NULLAGBLOCK) {
/*
* 2 resulting free entries, need to add one.
*/
if ((error = xfs_alloc_lookup_eq(bno_cur, nfbno2, nflen2, &i)))
return error;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 0))
return -EFSCORRUPTED;
if ((error = xfs_btree_insert(bno_cur, &i)))
return error;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 1))
return -EFSCORRUPTED;
}
return 0;
}
static xfs_failaddr_t
xfs_agfl_verify(
struct xfs_buf *bp)
{
struct xfs_mount *mp = bp->b_mount;
struct xfs_agfl *agfl = XFS_BUF_TO_AGFL(bp);
__be32 *agfl_bno = xfs_buf_to_agfl_bno(bp);
int i;
/*
* There is no verification of non-crc AGFLs because mkfs does not
* initialise the AGFL to zero or NULL. Hence the only valid part of the
* AGFL is what the AGF says is active. We can't get to the AGF, so we
* can't verify just those entries are valid.
*/
if (!xfs_has_crc(mp))
return NULL;
if (!xfs_verify_magic(bp, agfl->agfl_magicnum))
return __this_address;
if (!uuid_equal(&agfl->agfl_uuid, &mp->m_sb.sb_meta_uuid))
return __this_address;
/*
* during growfs operations, the perag is not fully initialised,
* so we can't use it for any useful checking. growfs ensures we can't
* use it by using uncached buffers that don't have the perag attached
* so we can detect and avoid this problem.
*/
if (bp->b_pag && be32_to_cpu(agfl->agfl_seqno) != bp->b_pag->pag_agno)
return __this_address;
for (i = 0; i < xfs_agfl_size(mp); i++) {
if (be32_to_cpu(agfl_bno[i]) != NULLAGBLOCK &&
be32_to_cpu(agfl_bno[i]) >= mp->m_sb.sb_agblocks)
return __this_address;
}
xfs: validate metadata LSNs against log on v5 superblocks Since the onset of v5 superblocks, the LSN of the last modification has been included in a variety of on-disk data structures. This LSN is used to provide log recovery ordering guarantees (e.g., to ensure an older log recovery item is not replayed over a newer target data structure). While this works correctly from the point a filesystem is formatted and mounted, userspace tools have some problematic behaviors that defeat this mechanism. For example, xfs_repair historically zeroes out the log unconditionally (regardless of whether corruption is detected). If this occurs, the LSN of the filesystem is reset and the log is now in a problematic state with respect to on-disk metadata structures that might have a larger LSN. Until either the log catches up to the highest previously used metadata LSN or each affected data structure is modified and written out without incident (which resets the metadata LSN), log recovery is susceptible to filesystem corruption. This problem is ultimately addressed and repaired in the associated userspace tools. The kernel is still responsible to detect the problem and notify the user that something is wrong. Check the superblock LSN at mount time and fail the mount if it is invalid. From that point on, trigger verifier failure on any metadata I/O where an invalid LSN is detected. This results in a filesystem shutdown and guarantees that we do not log metadata changes with invalid LSNs on disk. Since this is a known issue with a known recovery path, present a warning to instruct the user how to recover. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-10-12 12:59:25 +08:00
if (!xfs_log_check_lsn(mp, be64_to_cpu(XFS_BUF_TO_AGFL(bp)->agfl_lsn)))
return __this_address;
return NULL;
}
static void
xfs_agfl_read_verify(
struct xfs_buf *bp)
{
struct xfs_mount *mp = bp->b_mount;
xfs_failaddr_t fa;
/*
* There is no verification of non-crc AGFLs because mkfs does not
* initialise the AGFL to zero or NULL. Hence the only valid part of the
* AGFL is what the AGF says is active. We can't get to the AGF, so we
* can't verify just those entries are valid.
*/
if (!xfs_has_crc(mp))
return;
if (!xfs_buf_verify_cksum(bp, XFS_AGFL_CRC_OFF))
xfs_verifier_error(bp, -EFSBADCRC, __this_address);
else {
fa = xfs_agfl_verify(bp);
if (fa)
xfs_verifier_error(bp, -EFSCORRUPTED, fa);
}
}
static void
xfs_agfl_write_verify(
struct xfs_buf *bp)
{
struct xfs_mount *mp = bp->b_mount;
struct xfs_buf_log_item *bip = bp->b_log_item;
xfs_failaddr_t fa;
/* no verification of non-crc AGFLs */
if (!xfs_has_crc(mp))
return;
fa = xfs_agfl_verify(bp);
if (fa) {
xfs_verifier_error(bp, -EFSCORRUPTED, fa);
return;
}
if (bip)
XFS_BUF_TO_AGFL(bp)->agfl_lsn = cpu_to_be64(bip->bli_item.li_lsn);
xfs_buf_update_cksum(bp, XFS_AGFL_CRC_OFF);
}
const struct xfs_buf_ops xfs_agfl_buf_ops = {
.name = "xfs_agfl",
.magic = { cpu_to_be32(XFS_AGFL_MAGIC), cpu_to_be32(XFS_AGFL_MAGIC) },
.verify_read = xfs_agfl_read_verify,
.verify_write = xfs_agfl_write_verify,
.verify_struct = xfs_agfl_verify,
};
/*
* Read in the allocation group free block array.
*/
int
xfs_alloc_read_agfl(
struct xfs_perag *pag,
struct xfs_trans *tp,
struct xfs_buf **bpp)
{
struct xfs_mount *mp = pag->pag_mount;
struct xfs_buf *bp;
int error;
error = xfs_trans_read_buf(
mp, tp, mp->m_ddev_targp,
XFS_AG_DADDR(mp, pag->pag_agno, XFS_AGFL_DADDR(mp)),
XFS_FSS_TO_BB(mp, 1), 0, &bp, &xfs_agfl_buf_ops);
if (error)
return error;
xfs_buf_set_ref(bp, XFS_AGFL_REF);
*bpp = bp;
return 0;
}
STATIC int
xfs_alloc_update_counters(
struct xfs_trans *tp,
struct xfs_buf *agbp,
long len)
{
struct xfs_agf *agf = agbp->b_addr;
agbp->b_pag->pagf_freeblks += len;
be32_add_cpu(&agf->agf_freeblks, len);
if (unlikely(be32_to_cpu(agf->agf_freeblks) >
be32_to_cpu(agf->agf_length))) {
xfs_buf_mark_corrupt(agbp);
return -EFSCORRUPTED;
}
xfs_alloc_log_agf(tp, agbp, XFS_AGF_FREEBLKS);
return 0;
}
/*
* Block allocation algorithm and data structures.
*/
struct xfs_alloc_cur {
struct xfs_btree_cur *cnt; /* btree cursors */
struct xfs_btree_cur *bnolt;
struct xfs_btree_cur *bnogt;
xfs: optimize near mode bnobt scans with concurrent cntbt lookups The near mode fallback algorithm consists of a left/right scan of the bnobt. This algorithm has very poor breakdown characteristics under worst case free space fragmentation conditions. If a suitable extent is far enough from the locality hint, each allocation may scan most or all of the bnobt before it completes. This causes pathological behavior and extremely high allocation latencies. While locality is important to near mode allocations, it is not so important as to incur pathological allocation latency to provide the asolute best available locality for every allocation. If the allocation is large enough or far enough away, there is a point of diminishing returns. As such, we can bound the overall operation by including an iterative cntbt lookup in the broader search. The cntbt lookup is optimized to immediately find the extent with best locality for the given size on each iteration. Since the cntbt is indexed by extent size, the lookup repeats with a variably aggressive increasing search key size until it runs off the edge of the tree. This approach provides a natural balance between the two algorithms for various situations. For example, the bnobt scan is able to satisfy smaller allocations such as for inode chunks or btree blocks more quickly where the cntbt search may have to search through a large set of extent sizes when the search key starts off small relative to the largest extent in the tree. On the other hand, the cntbt search more deterministically covers the set of suitable extents for larger data extent allocation requests that the bnobt scan may have to search the entire tree to locate. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-14 08:10:36 +08:00
xfs_extlen_t cur_len;/* current search length */
xfs_agblock_t rec_bno;/* extent startblock */
xfs_extlen_t rec_len;/* extent length */
xfs_agblock_t bno; /* alloc bno */
xfs_extlen_t len; /* alloc len */
xfs_extlen_t diff; /* diff from search bno */
unsigned int busy_gen;/* busy state */
bool busy;
};
/*
* Set up cursors, etc. in the extent allocation cursor. This function can be
* called multiple times to reset an initialized structure without having to
* reallocate cursors.
*/
static int
xfs_alloc_cur_setup(
struct xfs_alloc_arg *args,
struct xfs_alloc_cur *acur)
{
int error;
int i;
xfs: optimize near mode bnobt scans with concurrent cntbt lookups The near mode fallback algorithm consists of a left/right scan of the bnobt. This algorithm has very poor breakdown characteristics under worst case free space fragmentation conditions. If a suitable extent is far enough from the locality hint, each allocation may scan most or all of the bnobt before it completes. This causes pathological behavior and extremely high allocation latencies. While locality is important to near mode allocations, it is not so important as to incur pathological allocation latency to provide the asolute best available locality for every allocation. If the allocation is large enough or far enough away, there is a point of diminishing returns. As such, we can bound the overall operation by including an iterative cntbt lookup in the broader search. The cntbt lookup is optimized to immediately find the extent with best locality for the given size on each iteration. Since the cntbt is indexed by extent size, the lookup repeats with a variably aggressive increasing search key size until it runs off the edge of the tree. This approach provides a natural balance between the two algorithms for various situations. For example, the bnobt scan is able to satisfy smaller allocations such as for inode chunks or btree blocks more quickly where the cntbt search may have to search through a large set of extent sizes when the search key starts off small relative to the largest extent in the tree. On the other hand, the cntbt search more deterministically covers the set of suitable extents for larger data extent allocation requests that the bnobt scan may have to search the entire tree to locate. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-14 08:10:36 +08:00
acur->cur_len = args->maxlen;
acur->rec_bno = 0;
acur->rec_len = 0;
acur->bno = 0;
acur->len = 0;
acur->diff = -1;
acur->busy = false;
acur->busy_gen = 0;
/*
* Perform an initial cntbt lookup to check for availability of maxlen
* extents. If this fails, we'll return -ENOSPC to signal the caller to
* attempt a small allocation.
*/
if (!acur->cnt)
acur->cnt = xfs_allocbt_init_cursor(args->mp, args->tp,
args->agbp, args->pag, XFS_BTNUM_CNT);
error = xfs_alloc_lookup_ge(acur->cnt, 0, args->maxlen, &i);
if (error)
return error;
/*
* Allocate the bnobt left and right search cursors.
*/
if (!acur->bnolt)
acur->bnolt = xfs_allocbt_init_cursor(args->mp, args->tp,
args->agbp, args->pag, XFS_BTNUM_BNO);
if (!acur->bnogt)
acur->bnogt = xfs_allocbt_init_cursor(args->mp, args->tp,
args->agbp, args->pag, XFS_BTNUM_BNO);
return i == 1 ? 0 : -ENOSPC;
}
static void
xfs_alloc_cur_close(
struct xfs_alloc_cur *acur,
bool error)
{
int cur_error = XFS_BTREE_NOERROR;
if (error)
cur_error = XFS_BTREE_ERROR;
if (acur->cnt)
xfs_btree_del_cursor(acur->cnt, cur_error);
if (acur->bnolt)
xfs_btree_del_cursor(acur->bnolt, cur_error);
if (acur->bnogt)
xfs_btree_del_cursor(acur->bnogt, cur_error);
acur->cnt = acur->bnolt = acur->bnogt = NULL;
}
/*
* Check an extent for allocation and track the best available candidate in the
* allocation structure. The cursor is deactivated if it has entered an out of
* range state based on allocation arguments. Optionally return the extent
* extent geometry and allocation status if requested by the caller.
*/
static int
xfs_alloc_cur_check(
struct xfs_alloc_arg *args,
struct xfs_alloc_cur *acur,
struct xfs_btree_cur *cur,
int *new)
{
int error, i;
xfs_agblock_t bno, bnoa, bnew;
xfs_extlen_t len, lena, diff = -1;
bool busy;
unsigned busy_gen = 0;
bool deactivate = false;
bool isbnobt = cur->bc_btnum == XFS_BTNUM_BNO;
*new = 0;
error = xfs_alloc_get_rec(cur, &bno, &len, &i);
if (error)
return error;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(args->mp, i != 1))
return -EFSCORRUPTED;
/*
* Check minlen and deactivate a cntbt cursor if out of acceptable size
* range (i.e., walking backwards looking for a minlen extent).
*/
if (len < args->minlen) {
deactivate = !isbnobt;
goto out;
}
busy = xfs_alloc_compute_aligned(args, bno, len, &bnoa, &lena,
&busy_gen);
acur->busy |= busy;
if (busy)
acur->busy_gen = busy_gen;
/* deactivate a bnobt cursor outside of locality range */
if (bnoa < args->min_agbno || bnoa > args->max_agbno) {
deactivate = isbnobt;
goto out;
}
if (lena < args->minlen)
goto out;
args->len = XFS_EXTLEN_MIN(lena, args->maxlen);
xfs_alloc_fix_len(args);
ASSERT(args->len >= args->minlen);
if (args->len < acur->len)
goto out;
/*
* We have an aligned record that satisfies minlen and beats or matches
* the candidate extent size. Compare locality for near allocation mode.
*/
diff = xfs_alloc_compute_diff(args->agbno, args->len,
args->alignment, args->datatype,
bnoa, lena, &bnew);
if (bnew == NULLAGBLOCK)
goto out;
/*
* Deactivate a bnobt cursor with worse locality than the current best.
*/
if (diff > acur->diff) {
deactivate = isbnobt;
goto out;
}
ASSERT(args->len > acur->len ||
(args->len == acur->len && diff <= acur->diff));
acur->rec_bno = bno;
acur->rec_len = len;
acur->bno = bnew;
acur->len = args->len;
acur->diff = diff;
*new = 1;
/*
* We're done if we found a perfect allocation. This only deactivates
* the current cursor, but this is just an optimization to terminate a
* cntbt search that otherwise runs to the edge of the tree.
*/
if (acur->diff == 0 && acur->len == args->maxlen)
deactivate = true;
out:
if (deactivate)
cur->bc_ag.abt.active = false;
trace_xfs_alloc_cur_check(args->mp, cur->bc_btnum, bno, len, diff,
*new);
return 0;
}
/*
* Complete an allocation of a candidate extent. Remove the extent from both
* trees and update the args structure.
*/
STATIC int
xfs_alloc_cur_finish(
struct xfs_alloc_arg *args,
struct xfs_alloc_cur *acur)
{
struct xfs_agf __maybe_unused *agf = args->agbp->b_addr;
int error;
ASSERT(acur->cnt && acur->bnolt);
ASSERT(acur->bno >= acur->rec_bno);
ASSERT(acur->bno + acur->len <= acur->rec_bno + acur->rec_len);
ASSERT(acur->rec_bno + acur->rec_len <= be32_to_cpu(agf->agf_length));
error = xfs_alloc_fixup_trees(acur->cnt, acur->bnolt, acur->rec_bno,
acur->rec_len, acur->bno, acur->len, 0);
if (error)
return error;
args->agbno = acur->bno;
args->len = acur->len;
args->wasfromfl = 0;
trace_xfs_alloc_cur(args);
return 0;
}
xfs: optimize near mode bnobt scans with concurrent cntbt lookups The near mode fallback algorithm consists of a left/right scan of the bnobt. This algorithm has very poor breakdown characteristics under worst case free space fragmentation conditions. If a suitable extent is far enough from the locality hint, each allocation may scan most or all of the bnobt before it completes. This causes pathological behavior and extremely high allocation latencies. While locality is important to near mode allocations, it is not so important as to incur pathological allocation latency to provide the asolute best available locality for every allocation. If the allocation is large enough or far enough away, there is a point of diminishing returns. As such, we can bound the overall operation by including an iterative cntbt lookup in the broader search. The cntbt lookup is optimized to immediately find the extent with best locality for the given size on each iteration. Since the cntbt is indexed by extent size, the lookup repeats with a variably aggressive increasing search key size until it runs off the edge of the tree. This approach provides a natural balance between the two algorithms for various situations. For example, the bnobt scan is able to satisfy smaller allocations such as for inode chunks or btree blocks more quickly where the cntbt search may have to search through a large set of extent sizes when the search key starts off small relative to the largest extent in the tree. On the other hand, the cntbt search more deterministically covers the set of suitable extents for larger data extent allocation requests that the bnobt scan may have to search the entire tree to locate. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-14 08:10:36 +08:00
/*
* Locality allocation lookup algorithm. This expects a cntbt cursor and uses
* bno optimized lookup to search for extents with ideal size and locality.
*/
STATIC int
xfs_alloc_cntbt_iter(
struct xfs_alloc_arg *args,
struct xfs_alloc_cur *acur)
{
struct xfs_btree_cur *cur = acur->cnt;
xfs_agblock_t bno;
xfs_extlen_t len, cur_len;
int error;
int i;
if (!xfs_alloc_cur_active(cur))
return 0;
/* locality optimized lookup */
cur_len = acur->cur_len;
error = xfs_alloc_lookup_ge(cur, args->agbno, cur_len, &i);
if (error)
return error;
if (i == 0)
return 0;
error = xfs_alloc_get_rec(cur, &bno, &len, &i);
if (error)
return error;
/* check the current record and update search length from it */
error = xfs_alloc_cur_check(args, acur, cur, &i);
if (error)
return error;
ASSERT(len >= acur->cur_len);
acur->cur_len = len;
/*
* We looked up the first record >= [agbno, len] above. The agbno is a
* secondary key and so the current record may lie just before or after
* agbno. If it is past agbno, check the previous record too so long as
* the length matches as it may be closer. Don't check a smaller record
* because that could deactivate our cursor.
*/
if (bno > args->agbno) {
error = xfs_btree_decrement(cur, 0, &i);
if (!error && i) {
error = xfs_alloc_get_rec(cur, &bno, &len, &i);
if (!error && i && len == acur->cur_len)
error = xfs_alloc_cur_check(args, acur, cur,
&i);
}
if (error)
return error;
}
/*
* Increment the search key until we find at least one allocation
* candidate or if the extent we found was larger. Otherwise, double the
* search key to optimize the search. Efficiency is more important here
* than absolute best locality.
*/
cur_len <<= 1;
if (!acur->len || acur->cur_len >= cur_len)
acur->cur_len++;
else
acur->cur_len = cur_len;
return error;
}
/*
* Deal with the case where only small freespaces remain. Either return the
* contents of the last freespace record, or allocate space from the freelist if
* there is nothing in the tree.
*/
STATIC int /* error */
xfs_alloc_ag_vextent_small(
struct xfs_alloc_arg *args, /* allocation argument structure */
struct xfs_btree_cur *ccur, /* optional by-size cursor */
xfs_agblock_t *fbnop, /* result block number */
xfs_extlen_t *flenp, /* result length */
int *stat) /* status: 0-freelist, 1-normal/none */
{
struct xfs_agf *agf = args->agbp->b_addr;
int error = 0;
xfs_agblock_t fbno = NULLAGBLOCK;
xfs_extlen_t flen = 0;
int i = 0;
/*
* If a cntbt cursor is provided, try to allocate the largest record in
* the tree. Try the AGFL if the cntbt is empty, otherwise fail the
* allocation. Make sure to respect minleft even when pulling from the
* freelist.
*/
if (ccur)
error = xfs_btree_decrement(ccur, 0, &i);
if (error)
goto error;
if (i) {
error = xfs_alloc_get_rec(ccur, &fbno, &flen, &i);
if (error)
goto error;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(args->mp, i != 1)) {
error = -EFSCORRUPTED;
goto error;
}
goto out;
}
if (args->minlen != 1 || args->alignment != 1 ||
args->resv == XFS_AG_RESV_AGFL ||
be32_to_cpu(agf->agf_flcount) <= args->minleft)
goto out;
error = xfs_alloc_get_freelist(args->pag, args->tp, args->agbp,
&fbno, 0);
if (error)
goto error;
if (fbno == NULLAGBLOCK)
goto out;
xfs_extent_busy_reuse(args->mp, args->pag, fbno, 1,
(args->datatype & XFS_ALLOC_NOBUSY));
if (args->datatype & XFS_ALLOC_USERDATA) {
struct xfs_buf *bp;
error = xfs_trans_get_buf(args->tp, args->mp->m_ddev_targp,
XFS_AGB_TO_DADDR(args->mp, args->agno, fbno),
args->mp->m_bsize, 0, &bp);
if (error)
goto error;
xfs_trans_binval(args->tp, bp);
}
*fbnop = args->agbno = fbno;
*flenp = args->len = 1;
if (XFS_IS_CORRUPT(args->mp, fbno >= be32_to_cpu(agf->agf_length))) {
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
error = -EFSCORRUPTED;
goto error;
}
args->wasfromfl = 1;
trace_xfs_alloc_small_freelist(args);
/*
* If we're feeding an AGFL block to something that doesn't live in the
* free space, we need to clear out the OWN_AG rmap.
*/
error = xfs_rmap_free(args->tp, args->agbp, args->pag, fbno, 1,
&XFS_RMAP_OINFO_AG);
if (error)
goto error;
*stat = 0;
return 0;
out:
/*
* Can't do the allocation, give up.
*/
if (flen < args->minlen) {
args->agbno = NULLAGBLOCK;
trace_xfs_alloc_small_notenough(args);
flen = 0;
}
*fbnop = fbno;
*flenp = flen;
*stat = 1;
trace_xfs_alloc_small_done(args);
return 0;
error:
trace_xfs_alloc_small_error(args);
return error;
}
/*
* Allocate a variable extent at exactly agno/bno.
* Extent's length (returned in *len) will be between minlen and maxlen,
* and of the form k * prod + mod unless there's nothing that large.
* Return the starting a.g. block (bno), or NULLAGBLOCK if we can't do it.
*/
STATIC int /* error */
xfs_alloc_ag_vextent_exact(
xfs_alloc_arg_t *args) /* allocation argument structure */
{
struct xfs_agf __maybe_unused *agf = args->agbp->b_addr;
struct xfs_btree_cur *bno_cur;/* by block-number btree cursor */
struct xfs_btree_cur *cnt_cur;/* by count btree cursor */
int error;
xfs_agblock_t fbno; /* start block of found extent */
xfs_extlen_t flen; /* length of found extent */
xfs_agblock_t tbno; /* start block of busy extent */
xfs_extlen_t tlen; /* length of busy extent */
xfs_agblock_t tend; /* end block of busy extent */
int i; /* success/failure of operation */
unsigned busy_gen;
ASSERT(args->alignment == 1);
/*
* Allocate/initialize a cursor for the by-number freespace btree.
*/
bno_cur = xfs_allocbt_init_cursor(args->mp, args->tp, args->agbp,
args->pag, XFS_BTNUM_BNO);
/*
* Lookup bno and minlen in the btree (minlen is irrelevant, really).
* Look for the closest free block <= bno, it must contain bno
* if any free block does.
*/
error = xfs_alloc_lookup_le(bno_cur, args->agbno, args->minlen, &i);
if (error)
goto error0;
if (!i)
goto not_found;
/*
* Grab the freespace record.
*/
error = xfs_alloc_get_rec(bno_cur, &fbno, &flen, &i);
if (error)
goto error0;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(args->mp, i != 1)) {
error = -EFSCORRUPTED;
goto error0;
}
ASSERT(fbno <= args->agbno);
/*
* Check for overlapping busy extents.
*/
tbno = fbno;
tlen = flen;
xfs_extent_busy_trim(args, &tbno, &tlen, &busy_gen);
/*
* Give up if the start of the extent is busy, or the freespace isn't
* long enough for the minimum request.
*/
if (tbno > args->agbno)
goto not_found;
if (tlen < args->minlen)
goto not_found;
tend = tbno + tlen;
if (tend < args->agbno + args->minlen)
goto not_found;
/*
* End of extent will be smaller of the freespace end and the
* maximal requested end.
*
* Fix the length according to mod and prod if given.
*/
args->len = XFS_AGBLOCK_MIN(tend, args->agbno + args->maxlen)
- args->agbno;
xfs_alloc_fix_len(args);
ASSERT(args->agbno + args->len <= tend);
/*
* We are allocating agbno for args->len
* Allocate/initialize a cursor for the by-size btree.
*/
cnt_cur = xfs_allocbt_init_cursor(args->mp, args->tp, args->agbp,
args->pag, XFS_BTNUM_CNT);
ASSERT(args->agbno + args->len <= be32_to_cpu(agf->agf_length));
error = xfs_alloc_fixup_trees(cnt_cur, bno_cur, fbno, flen, args->agbno,
args->len, XFSA_FIXUP_BNO_OK);
if (error) {
xfs_btree_del_cursor(cnt_cur, XFS_BTREE_ERROR);
goto error0;
}
xfs_btree_del_cursor(bno_cur, XFS_BTREE_NOERROR);
xfs_btree_del_cursor(cnt_cur, XFS_BTREE_NOERROR);
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-15 07:14:59 +08:00
args->wasfromfl = 0;
trace_xfs_alloc_exact_done(args);
return 0;
not_found:
/* Didn't find it, return null. */
xfs_btree_del_cursor(bno_cur, XFS_BTREE_NOERROR);
args->agbno = NULLAGBLOCK;
trace_xfs_alloc_exact_notfound(args);
return 0;
error0:
xfs_btree_del_cursor(bno_cur, XFS_BTREE_ERROR);
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-15 07:14:59 +08:00
trace_xfs_alloc_exact_error(args);
return error;
}
/*
* Search a given number of btree records in a given direction. Check each
* record against the good extent we've already found.
*/
STATIC int
xfs_alloc_walk_iter(
struct xfs_alloc_arg *args,
struct xfs_alloc_cur *acur,
struct xfs_btree_cur *cur,
bool increment,
bool find_one, /* quit on first candidate */
int count, /* rec count (-1 for infinite) */
int *stat)
{
int error;
int i;
*stat = 0;
/*
* Search so long as the cursor is active or we find a better extent.
* The cursor is deactivated if it extends beyond the range of the
* current allocation candidate.
*/
while (xfs_alloc_cur_active(cur) && count) {
error = xfs_alloc_cur_check(args, acur, cur, &i);
if (error)
return error;
if (i == 1) {
*stat = 1;
if (find_one)
break;
}
if (!xfs_alloc_cur_active(cur))
break;
if (increment)
error = xfs_btree_increment(cur, 0, &i);
else
error = xfs_btree_decrement(cur, 0, &i);
if (error)
return error;
if (i == 0)
cur->bc_ag.abt.active = false;
if (count > 0)
count--;
}
return 0;
}
/*
xfs: optimize near mode bnobt scans with concurrent cntbt lookups The near mode fallback algorithm consists of a left/right scan of the bnobt. This algorithm has very poor breakdown characteristics under worst case free space fragmentation conditions. If a suitable extent is far enough from the locality hint, each allocation may scan most or all of the bnobt before it completes. This causes pathological behavior and extremely high allocation latencies. While locality is important to near mode allocations, it is not so important as to incur pathological allocation latency to provide the asolute best available locality for every allocation. If the allocation is large enough or far enough away, there is a point of diminishing returns. As such, we can bound the overall operation by including an iterative cntbt lookup in the broader search. The cntbt lookup is optimized to immediately find the extent with best locality for the given size on each iteration. Since the cntbt is indexed by extent size, the lookup repeats with a variably aggressive increasing search key size until it runs off the edge of the tree. This approach provides a natural balance between the two algorithms for various situations. For example, the bnobt scan is able to satisfy smaller allocations such as for inode chunks or btree blocks more quickly where the cntbt search may have to search through a large set of extent sizes when the search key starts off small relative to the largest extent in the tree. On the other hand, the cntbt search more deterministically covers the set of suitable extents for larger data extent allocation requests that the bnobt scan may have to search the entire tree to locate. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-14 08:10:36 +08:00
* Search the by-bno and by-size btrees in parallel in search of an extent with
* ideal locality based on the NEAR mode ->agbno locality hint.
*/
STATIC int
xfs: optimize near mode bnobt scans with concurrent cntbt lookups The near mode fallback algorithm consists of a left/right scan of the bnobt. This algorithm has very poor breakdown characteristics under worst case free space fragmentation conditions. If a suitable extent is far enough from the locality hint, each allocation may scan most or all of the bnobt before it completes. This causes pathological behavior and extremely high allocation latencies. While locality is important to near mode allocations, it is not so important as to incur pathological allocation latency to provide the asolute best available locality for every allocation. If the allocation is large enough or far enough away, there is a point of diminishing returns. As such, we can bound the overall operation by including an iterative cntbt lookup in the broader search. The cntbt lookup is optimized to immediately find the extent with best locality for the given size on each iteration. Since the cntbt is indexed by extent size, the lookup repeats with a variably aggressive increasing search key size until it runs off the edge of the tree. This approach provides a natural balance between the two algorithms for various situations. For example, the bnobt scan is able to satisfy smaller allocations such as for inode chunks or btree blocks more quickly where the cntbt search may have to search through a large set of extent sizes when the search key starts off small relative to the largest extent in the tree. On the other hand, the cntbt search more deterministically covers the set of suitable extents for larger data extent allocation requests that the bnobt scan may have to search the entire tree to locate. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-14 08:10:36 +08:00
xfs_alloc_ag_vextent_locality(
struct xfs_alloc_arg *args,
struct xfs_alloc_cur *acur,
int *stat)
{
struct xfs_btree_cur *fbcur = NULL;
int error;
int i;
bool fbinc;
ASSERT(acur->len == 0);
*stat = 0;
xfs: optimize near mode bnobt scans with concurrent cntbt lookups The near mode fallback algorithm consists of a left/right scan of the bnobt. This algorithm has very poor breakdown characteristics under worst case free space fragmentation conditions. If a suitable extent is far enough from the locality hint, each allocation may scan most or all of the bnobt before it completes. This causes pathological behavior and extremely high allocation latencies. While locality is important to near mode allocations, it is not so important as to incur pathological allocation latency to provide the asolute best available locality for every allocation. If the allocation is large enough or far enough away, there is a point of diminishing returns. As such, we can bound the overall operation by including an iterative cntbt lookup in the broader search. The cntbt lookup is optimized to immediately find the extent with best locality for the given size on each iteration. Since the cntbt is indexed by extent size, the lookup repeats with a variably aggressive increasing search key size until it runs off the edge of the tree. This approach provides a natural balance between the two algorithms for various situations. For example, the bnobt scan is able to satisfy smaller allocations such as for inode chunks or btree blocks more quickly where the cntbt search may have to search through a large set of extent sizes when the search key starts off small relative to the largest extent in the tree. On the other hand, the cntbt search more deterministically covers the set of suitable extents for larger data extent allocation requests that the bnobt scan may have to search the entire tree to locate. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-14 08:10:36 +08:00
error = xfs_alloc_lookup_ge(acur->cnt, args->agbno, acur->cur_len, &i);
if (error)
return error;
error = xfs_alloc_lookup_le(acur->bnolt, args->agbno, 0, &i);
if (error)
return error;
error = xfs_alloc_lookup_ge(acur->bnogt, args->agbno, 0, &i);
if (error)
return error;
/*
xfs: optimize near mode bnobt scans with concurrent cntbt lookups The near mode fallback algorithm consists of a left/right scan of the bnobt. This algorithm has very poor breakdown characteristics under worst case free space fragmentation conditions. If a suitable extent is far enough from the locality hint, each allocation may scan most or all of the bnobt before it completes. This causes pathological behavior and extremely high allocation latencies. While locality is important to near mode allocations, it is not so important as to incur pathological allocation latency to provide the asolute best available locality for every allocation. If the allocation is large enough or far enough away, there is a point of diminishing returns. As such, we can bound the overall operation by including an iterative cntbt lookup in the broader search. The cntbt lookup is optimized to immediately find the extent with best locality for the given size on each iteration. Since the cntbt is indexed by extent size, the lookup repeats with a variably aggressive increasing search key size until it runs off the edge of the tree. This approach provides a natural balance between the two algorithms for various situations. For example, the bnobt scan is able to satisfy smaller allocations such as for inode chunks or btree blocks more quickly where the cntbt search may have to search through a large set of extent sizes when the search key starts off small relative to the largest extent in the tree. On the other hand, the cntbt search more deterministically covers the set of suitable extents for larger data extent allocation requests that the bnobt scan may have to search the entire tree to locate. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-14 08:10:36 +08:00
* Search the bnobt and cntbt in parallel. Search the bnobt left and
* right and lookup the closest extent to the locality hint for each
* extent size key in the cntbt. The entire search terminates
* immediately on a bnobt hit because that means we've found best case
* locality. Otherwise the search continues until the cntbt cursor runs
* off the end of the tree. If no allocation candidate is found at this
* point, give up on locality, walk backwards from the end of the cntbt
* and take the first available extent.
*
* The parallel tree searches balance each other out to provide fairly
* consistent performance for various situations. The bnobt search can
* have pathological behavior in the worst case scenario of larger
* allocation requests and fragmented free space. On the other hand, the
* bnobt is able to satisfy most smaller allocation requests much more
* quickly than the cntbt. The cntbt search can sift through fragmented
* free space and sets of free extents for larger allocation requests
* more quickly than the bnobt. Since the locality hint is just a hint
* and we don't want to scan the entire bnobt for perfect locality, the
* cntbt search essentially bounds the bnobt search such that we can
* find good enough locality at reasonable performance in most cases.
*/
while (xfs_alloc_cur_active(acur->bnolt) ||
xfs: optimize near mode bnobt scans with concurrent cntbt lookups The near mode fallback algorithm consists of a left/right scan of the bnobt. This algorithm has very poor breakdown characteristics under worst case free space fragmentation conditions. If a suitable extent is far enough from the locality hint, each allocation may scan most or all of the bnobt before it completes. This causes pathological behavior and extremely high allocation latencies. While locality is important to near mode allocations, it is not so important as to incur pathological allocation latency to provide the asolute best available locality for every allocation. If the allocation is large enough or far enough away, there is a point of diminishing returns. As such, we can bound the overall operation by including an iterative cntbt lookup in the broader search. The cntbt lookup is optimized to immediately find the extent with best locality for the given size on each iteration. Since the cntbt is indexed by extent size, the lookup repeats with a variably aggressive increasing search key size until it runs off the edge of the tree. This approach provides a natural balance between the two algorithms for various situations. For example, the bnobt scan is able to satisfy smaller allocations such as for inode chunks or btree blocks more quickly where the cntbt search may have to search through a large set of extent sizes when the search key starts off small relative to the largest extent in the tree. On the other hand, the cntbt search more deterministically covers the set of suitable extents for larger data extent allocation requests that the bnobt scan may have to search the entire tree to locate. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-14 08:10:36 +08:00
xfs_alloc_cur_active(acur->bnogt) ||
xfs_alloc_cur_active(acur->cnt)) {
trace_xfs_alloc_cur_lookup(args);
/*
* Search the bnobt left and right. In the case of a hit, finish
* the search in the opposite direction and we're done.
*/
error = xfs_alloc_walk_iter(args, acur, acur->bnolt, false,
true, 1, &i);
if (error)
return error;
if (i == 1) {
trace_xfs_alloc_cur_left(args);
fbcur = acur->bnogt;
fbinc = true;
break;
}
error = xfs_alloc_walk_iter(args, acur, acur->bnogt, true, true,
1, &i);
if (error)
return error;
if (i == 1) {
trace_xfs_alloc_cur_right(args);
fbcur = acur->bnolt;
fbinc = false;
break;
}
xfs: optimize near mode bnobt scans with concurrent cntbt lookups The near mode fallback algorithm consists of a left/right scan of the bnobt. This algorithm has very poor breakdown characteristics under worst case free space fragmentation conditions. If a suitable extent is far enough from the locality hint, each allocation may scan most or all of the bnobt before it completes. This causes pathological behavior and extremely high allocation latencies. While locality is important to near mode allocations, it is not so important as to incur pathological allocation latency to provide the asolute best available locality for every allocation. If the allocation is large enough or far enough away, there is a point of diminishing returns. As such, we can bound the overall operation by including an iterative cntbt lookup in the broader search. The cntbt lookup is optimized to immediately find the extent with best locality for the given size on each iteration. Since the cntbt is indexed by extent size, the lookup repeats with a variably aggressive increasing search key size until it runs off the edge of the tree. This approach provides a natural balance between the two algorithms for various situations. For example, the bnobt scan is able to satisfy smaller allocations such as for inode chunks or btree blocks more quickly where the cntbt search may have to search through a large set of extent sizes when the search key starts off small relative to the largest extent in the tree. On the other hand, the cntbt search more deterministically covers the set of suitable extents for larger data extent allocation requests that the bnobt scan may have to search the entire tree to locate. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-14 08:10:36 +08:00
/*
* Check the extent with best locality based on the current
* extent size search key and keep track of the best candidate.
*/
error = xfs_alloc_cntbt_iter(args, acur);
if (error)
return error;
if (!xfs_alloc_cur_active(acur->cnt)) {
trace_xfs_alloc_cur_lookup_done(args);
break;
}
}
/*
* If we failed to find anything due to busy extents, return empty
* handed so the caller can flush and retry. If no busy extents were
* found, walk backwards from the end of the cntbt as a last resort.
*/
if (!xfs_alloc_cur_active(acur->cnt) && !acur->len && !acur->busy) {
error = xfs_btree_decrement(acur->cnt, 0, &i);
if (error)
return error;
if (i) {
acur->cnt->bc_ag.abt.active = true;
xfs: optimize near mode bnobt scans with concurrent cntbt lookups The near mode fallback algorithm consists of a left/right scan of the bnobt. This algorithm has very poor breakdown characteristics under worst case free space fragmentation conditions. If a suitable extent is far enough from the locality hint, each allocation may scan most or all of the bnobt before it completes. This causes pathological behavior and extremely high allocation latencies. While locality is important to near mode allocations, it is not so important as to incur pathological allocation latency to provide the asolute best available locality for every allocation. If the allocation is large enough or far enough away, there is a point of diminishing returns. As such, we can bound the overall operation by including an iterative cntbt lookup in the broader search. The cntbt lookup is optimized to immediately find the extent with best locality for the given size on each iteration. Since the cntbt is indexed by extent size, the lookup repeats with a variably aggressive increasing search key size until it runs off the edge of the tree. This approach provides a natural balance between the two algorithms for various situations. For example, the bnobt scan is able to satisfy smaller allocations such as for inode chunks or btree blocks more quickly where the cntbt search may have to search through a large set of extent sizes when the search key starts off small relative to the largest extent in the tree. On the other hand, the cntbt search more deterministically covers the set of suitable extents for larger data extent allocation requests that the bnobt scan may have to search the entire tree to locate. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-14 08:10:36 +08:00
fbcur = acur->cnt;
fbinc = false;
}
}
xfs: optimize near mode bnobt scans with concurrent cntbt lookups The near mode fallback algorithm consists of a left/right scan of the bnobt. This algorithm has very poor breakdown characteristics under worst case free space fragmentation conditions. If a suitable extent is far enough from the locality hint, each allocation may scan most or all of the bnobt before it completes. This causes pathological behavior and extremely high allocation latencies. While locality is important to near mode allocations, it is not so important as to incur pathological allocation latency to provide the asolute best available locality for every allocation. If the allocation is large enough or far enough away, there is a point of diminishing returns. As such, we can bound the overall operation by including an iterative cntbt lookup in the broader search. The cntbt lookup is optimized to immediately find the extent with best locality for the given size on each iteration. Since the cntbt is indexed by extent size, the lookup repeats with a variably aggressive increasing search key size until it runs off the edge of the tree. This approach provides a natural balance between the two algorithms for various situations. For example, the bnobt scan is able to satisfy smaller allocations such as for inode chunks or btree blocks more quickly where the cntbt search may have to search through a large set of extent sizes when the search key starts off small relative to the largest extent in the tree. On the other hand, the cntbt search more deterministically covers the set of suitable extents for larger data extent allocation requests that the bnobt scan may have to search the entire tree to locate. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-14 08:10:36 +08:00
/*
* Search in the opposite direction for a better entry in the case of
* a bnobt hit or walk backwards from the end of the cntbt.
*/
if (fbcur) {
error = xfs_alloc_walk_iter(args, acur, fbcur, fbinc, true, -1,
&i);
if (error)
return error;
}
if (acur->len)
*stat = 1;
return 0;
}
/* Check the last block of the cnt btree for allocations. */
static int
xfs_alloc_ag_vextent_lastblock(
struct xfs_alloc_arg *args,
struct xfs_alloc_cur *acur,
xfs_agblock_t *bno,
xfs_extlen_t *len,
bool *allocated)
{
int error;
int i;
#ifdef DEBUG
/* Randomly don't execute the first algorithm. */
if (get_random_u32_below(2))
return 0;
#endif
/*
* Start from the entry that lookup found, sequence through all larger
* free blocks. If we're actually pointing at a record smaller than
* maxlen, go to the start of this block, and skip all those smaller
* than minlen.
*/
if (*len || args->alignment > 1) {
acur->cnt->bc_levels[0].ptr = 1;
do {
error = xfs_alloc_get_rec(acur->cnt, bno, len, &i);
if (error)
return error;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(args->mp, i != 1))
return -EFSCORRUPTED;
if (*len >= args->minlen)
break;
error = xfs_btree_increment(acur->cnt, 0, &i);
if (error)
return error;
} while (i);
ASSERT(*len >= args->minlen);
if (!i)
return 0;
}
error = xfs_alloc_walk_iter(args, acur, acur->cnt, true, false, -1, &i);
if (error)
return error;
/*
* It didn't work. We COULD be in a case where there's a good record
* somewhere, so try again.
*/
if (acur->len == 0)
return 0;
trace_xfs_alloc_near_first(args);
*allocated = true;
return 0;
}
/*
* Allocate a variable extent near bno in the allocation group agno.
* Extent's length (returned in len) will be between minlen and maxlen,
* and of the form k * prod + mod unless there's nothing that large.
* Return the starting a.g. block, or NULLAGBLOCK if we can't do it.
*/
STATIC int
xfs_alloc_ag_vextent_near(
struct xfs_alloc_arg *args)
{
struct xfs_alloc_cur acur = {};
int error; /* error code */
int i; /* result code, temporary */
xfs_agblock_t bno;
xfs_extlen_t len;
/* handle uninitialized agbno range so caller doesn't have to */
xfs: support min/max agbno args in block allocator The block allocator supports various arguments to tweak block allocation behavior and set allocation requirements. The sparse inode chunk feature introduces a new requirement not supported by the current arguments. Sparse inode allocations must convert or merge into an inode record that describes a fixed length chunk (64 inodes x inodesize). Full inode chunk allocations by definition always result in valid inode records. Sparse chunk allocations are smaller and the associated records can refer to blocks not owned by the inode chunk. This model can result in invalid inode records in certain cases. For example, if a sparse allocation occurs near the start of an AG, the aligned inode record for that chunk might refer to agbno 0. If an allocation occurs towards the end of the AG and the AG size is not aligned, the inode record could refer to blocks beyond the end of the AG. While neither of these scenarios directly result in corruption, they both insert invalid inode records and at minimum cause repair to complain, are unlikely to merge into full chunks over time and set land mines for other areas of code. To guarantee sparse inode chunk allocation creates valid inode records, support the ability to specify an agbno range limit for XFS_ALLOCTYPE_NEAR_BNO block allocations. The min/max agbno's are specified in the allocation arguments and limit the block allocation algorithms to that range. The starting 'agbno' hint is clamped to the range if the specified agbno is out of range. If no sufficient extent is available within the range, the allocation fails. For backwards compatibility, the min/max fields can be initialized to 0 to disable range limiting (e.g., equivalent to min=0,max=agsize). Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-05-29 06:53:00 +08:00
if (!args->min_agbno && !args->max_agbno)
args->max_agbno = args->mp->m_sb.sb_agblocks - 1;
ASSERT(args->min_agbno <= args->max_agbno);
/* clamp agbno to the range if it's outside */
if (args->agbno < args->min_agbno)
args->agbno = args->min_agbno;
if (args->agbno > args->max_agbno)
args->agbno = args->max_agbno;
restart:
len = 0;
/*
* Set up cursors and see if there are any free extents as big as
* maxlen. If not, pick the last entry in the tree unless the tree is
* empty.
*/
error = xfs_alloc_cur_setup(args, &acur);
if (error == -ENOSPC) {
error = xfs_alloc_ag_vextent_small(args, acur.cnt, &bno,
&len, &i);
if (error)
goto out;
if (i == 0 || len == 0) {
trace_xfs_alloc_near_noentry(args);
goto out;
}
ASSERT(i == 1);
} else if (error) {
goto out;
}
/*
* First algorithm.
* If the requested extent is large wrt the freespaces available
* in this a.g., then the cursor will be pointing to a btree entry
* near the right edge of the tree. If it's in the last btree leaf
* block, then we just examine all the entries in that block
* that are big enough, and pick the best one.
*/
if (xfs_btree_islastblock(acur.cnt, 0)) {
bool allocated = false;
error = xfs_alloc_ag_vextent_lastblock(args, &acur, &bno, &len,
&allocated);
if (error)
goto out;
if (allocated)
goto alloc_finish;
}
/*
xfs: optimize near mode bnobt scans with concurrent cntbt lookups The near mode fallback algorithm consists of a left/right scan of the bnobt. This algorithm has very poor breakdown characteristics under worst case free space fragmentation conditions. If a suitable extent is far enough from the locality hint, each allocation may scan most or all of the bnobt before it completes. This causes pathological behavior and extremely high allocation latencies. While locality is important to near mode allocations, it is not so important as to incur pathological allocation latency to provide the asolute best available locality for every allocation. If the allocation is large enough or far enough away, there is a point of diminishing returns. As such, we can bound the overall operation by including an iterative cntbt lookup in the broader search. The cntbt lookup is optimized to immediately find the extent with best locality for the given size on each iteration. Since the cntbt is indexed by extent size, the lookup repeats with a variably aggressive increasing search key size until it runs off the edge of the tree. This approach provides a natural balance between the two algorithms for various situations. For example, the bnobt scan is able to satisfy smaller allocations such as for inode chunks or btree blocks more quickly where the cntbt search may have to search through a large set of extent sizes when the search key starts off small relative to the largest extent in the tree. On the other hand, the cntbt search more deterministically covers the set of suitable extents for larger data extent allocation requests that the bnobt scan may have to search the entire tree to locate. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-14 08:10:36 +08:00
* Second algorithm. Combined cntbt and bnobt search to find ideal
* locality.
*/
xfs: optimize near mode bnobt scans with concurrent cntbt lookups The near mode fallback algorithm consists of a left/right scan of the bnobt. This algorithm has very poor breakdown characteristics under worst case free space fragmentation conditions. If a suitable extent is far enough from the locality hint, each allocation may scan most or all of the bnobt before it completes. This causes pathological behavior and extremely high allocation latencies. While locality is important to near mode allocations, it is not so important as to incur pathological allocation latency to provide the asolute best available locality for every allocation. If the allocation is large enough or far enough away, there is a point of diminishing returns. As such, we can bound the overall operation by including an iterative cntbt lookup in the broader search. The cntbt lookup is optimized to immediately find the extent with best locality for the given size on each iteration. Since the cntbt is indexed by extent size, the lookup repeats with a variably aggressive increasing search key size until it runs off the edge of the tree. This approach provides a natural balance between the two algorithms for various situations. For example, the bnobt scan is able to satisfy smaller allocations such as for inode chunks or btree blocks more quickly where the cntbt search may have to search through a large set of extent sizes when the search key starts off small relative to the largest extent in the tree. On the other hand, the cntbt search more deterministically covers the set of suitable extents for larger data extent allocation requests that the bnobt scan may have to search the entire tree to locate. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-14 08:10:36 +08:00
error = xfs_alloc_ag_vextent_locality(args, &acur, &i);
if (error)
goto out;
/*
* If we couldn't get anything, give up.
*/
if (!acur.len) {
if (acur.busy) {
trace_xfs_alloc_near_busy(args);
xfs_extent_busy_flush(args->mp, args->pag,
acur.busy_gen);
goto restart;
}
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-15 07:14:59 +08:00
trace_xfs_alloc_size_neither(args);
args->agbno = NULLAGBLOCK;
goto out;
}
alloc_finish:
/* fix up btrees on a successful allocation */
error = xfs_alloc_cur_finish(args, &acur);
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-15 07:14:59 +08:00
out:
xfs_alloc_cur_close(&acur, error);
return error;
}
/*
* Allocate a variable extent anywhere in the allocation group agno.
* Extent's length (returned in len) will be between minlen and maxlen,
* and of the form k * prod + mod unless there's nothing that large.
* Return the starting a.g. block, or NULLAGBLOCK if we can't do it.
*/
STATIC int /* error */
xfs_alloc_ag_vextent_size(
xfs_alloc_arg_t *args) /* allocation argument structure */
{
struct xfs_agf *agf = args->agbp->b_addr;
struct xfs_btree_cur *bno_cur; /* cursor for bno btree */
struct xfs_btree_cur *cnt_cur; /* cursor for cnt btree */
int error; /* error result */
xfs_agblock_t fbno; /* start of found freespace */
xfs_extlen_t flen; /* length of found freespace */
int i; /* temp status variable */
xfs_agblock_t rbno; /* returned block number */
xfs_extlen_t rlen; /* length of returned extent */
bool busy;
unsigned busy_gen;
restart:
/*
* Allocate and initialize a cursor for the by-size btree.
*/
cnt_cur = xfs_allocbt_init_cursor(args->mp, args->tp, args->agbp,
args->pag, XFS_BTNUM_CNT);
bno_cur = NULL;
/*
* Look for an entry >= maxlen+alignment-1 blocks.
*/
if ((error = xfs_alloc_lookup_ge(cnt_cur, 0,
args->maxlen + args->alignment - 1, &i)))
goto error0;
/*
* If none then we have to settle for a smaller extent. In the case that
* there are no large extents, this will return the last entry in the
* tree unless the tree is empty. In the case that there are only busy
* large extents, this will return the largest small extent unless there
* are no smaller extents available.
*/
if (!i) {
error = xfs_alloc_ag_vextent_small(args, cnt_cur,
&fbno, &flen, &i);
if (error)
goto error0;
if (i == 0 || flen == 0) {
xfs_btree_del_cursor(cnt_cur, XFS_BTREE_NOERROR);
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-15 07:14:59 +08:00
trace_xfs_alloc_size_noentry(args);
return 0;
}
ASSERT(i == 1);
busy = xfs_alloc_compute_aligned(args, fbno, flen, &rbno,
&rlen, &busy_gen);
} else {
/*
* Search for a non-busy extent that is large enough.
*/
for (;;) {
error = xfs_alloc_get_rec(cnt_cur, &fbno, &flen, &i);
if (error)
goto error0;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(args->mp, i != 1)) {
error = -EFSCORRUPTED;
goto error0;
}
busy = xfs_alloc_compute_aligned(args, fbno, flen,
&rbno, &rlen, &busy_gen);
if (rlen >= args->maxlen)
break;
error = xfs_btree_increment(cnt_cur, 0, &i);
if (error)
goto error0;
if (i == 0) {
/*
* Our only valid extents must have been busy.
* Make it unbusy by forcing the log out and
* retrying.
*/
xfs_btree_del_cursor(cnt_cur,
XFS_BTREE_NOERROR);
trace_xfs_alloc_size_busy(args);
xfs_extent_busy_flush(args->mp,
args->pag, busy_gen);
goto restart;
}
}
}
/*
* In the first case above, we got the last entry in the
* by-size btree. Now we check to see if the space hits maxlen
* once aligned; if not, we search left for something better.
* This can't happen in the second case above.
*/
rlen = XFS_EXTLEN_MIN(args->maxlen, rlen);
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(args->mp,
rlen != 0 &&
(rlen > flen ||
rbno + rlen > fbno + flen))) {
error = -EFSCORRUPTED;
goto error0;
}
if (rlen < args->maxlen) {
xfs_agblock_t bestfbno;
xfs_extlen_t bestflen;
xfs_agblock_t bestrbno;
xfs_extlen_t bestrlen;
bestrlen = rlen;
bestrbno = rbno;
bestflen = flen;
bestfbno = fbno;
for (;;) {
if ((error = xfs_btree_decrement(cnt_cur, 0, &i)))
goto error0;
if (i == 0)
break;
if ((error = xfs_alloc_get_rec(cnt_cur, &fbno, &flen,
&i)))
goto error0;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(args->mp, i != 1)) {
error = -EFSCORRUPTED;
goto error0;
}
if (flen < bestrlen)
break;
busy = xfs_alloc_compute_aligned(args, fbno, flen,
&rbno, &rlen, &busy_gen);
rlen = XFS_EXTLEN_MIN(args->maxlen, rlen);
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(args->mp,
rlen != 0 &&
(rlen > flen ||
rbno + rlen > fbno + flen))) {
error = -EFSCORRUPTED;
goto error0;
}
if (rlen > bestrlen) {
bestrlen = rlen;
bestrbno = rbno;
bestflen = flen;
bestfbno = fbno;
if (rlen == args->maxlen)
break;
}
}
if ((error = xfs_alloc_lookup_eq(cnt_cur, bestfbno, bestflen,
&i)))
goto error0;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(args->mp, i != 1)) {
error = -EFSCORRUPTED;
goto error0;
}
rlen = bestrlen;
rbno = bestrbno;
flen = bestflen;
fbno = bestfbno;
}
args->wasfromfl = 0;
/*
* Fix up the length.
*/
args->len = rlen;
if (rlen < args->minlen) {
if (busy) {
xfs_btree_del_cursor(cnt_cur, XFS_BTREE_NOERROR);
trace_xfs_alloc_size_busy(args);
xfs_extent_busy_flush(args->mp, args->pag, busy_gen);
goto restart;
}
goto out_nominleft;
}
xfs_alloc_fix_len(args);
rlen = args->len;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(args->mp, rlen > flen)) {
error = -EFSCORRUPTED;
goto error0;
}
/*
* Allocate and initialize a cursor for the by-block tree.
*/
bno_cur = xfs_allocbt_init_cursor(args->mp, args->tp, args->agbp,
args->pag, XFS_BTNUM_BNO);
if ((error = xfs_alloc_fixup_trees(cnt_cur, bno_cur, fbno, flen,
rbno, rlen, XFSA_FIXUP_CNT_OK)))
goto error0;
xfs_btree_del_cursor(cnt_cur, XFS_BTREE_NOERROR);
xfs_btree_del_cursor(bno_cur, XFS_BTREE_NOERROR);
cnt_cur = bno_cur = NULL;
args->len = rlen;
args->agbno = rbno;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(args->mp,
args->agbno + args->len >
be32_to_cpu(agf->agf_length))) {
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
error = -EFSCORRUPTED;
goto error0;
}
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-15 07:14:59 +08:00
trace_xfs_alloc_size_done(args);
return 0;
error0:
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-15 07:14:59 +08:00
trace_xfs_alloc_size_error(args);
if (cnt_cur)
xfs_btree_del_cursor(cnt_cur, XFS_BTREE_ERROR);
if (bno_cur)
xfs_btree_del_cursor(bno_cur, XFS_BTREE_ERROR);
return error;
out_nominleft:
xfs_btree_del_cursor(cnt_cur, XFS_BTREE_NOERROR);
trace_xfs_alloc_size_nominleft(args);
args->agbno = NULLAGBLOCK;
return 0;
}
/*
* Free the extent starting at agno/bno for length.
*/
xfs: add owner field to extent allocation and freeing For the rmap btree to work, we have to feed the extent owner information to the the allocation and freeing functions. This information is what will end up in the rmap btree that tracks allocated extents. While we technically don't need the owner information when freeing extents, passing it allows us to validate that the extent we are removing from the rmap btree actually belonged to the owner we expected it to belong to. We also define a special set of owner values for internal metadata that would otherwise have no owner. This allows us to tell the difference between metadata owned by different per-ag btrees, as well as static fs metadata (e.g. AG headers) and internal journal blocks. There are also a couple of special cases we need to take care of - during EFI recovery, we don't actually know who the original owner was, so we need to pass a wildcard to indicate that we aren't checking the owner for validity. We also need special handling in growfs, as we "free" the space in the last AG when extending it, but because it's new space it has no actual owner... While touching the xfs_bmap_add_free() function, re-order the parameters to put the struct xfs_mount first. Extend the owner field to include both the owner type and some sort of index within the owner. The index field will be used to support reverse mappings when reflink is enabled. When we're freeing extents from an EFI, we don't have the owner information available (rmap updates have their own redo items). xfs_free_extent therefore doesn't need to do an rmap update. Make sure that the log replay code signals this correctly. This is based upon a patch originally from Dave Chinner. It has been extended to add more owner information with the intent of helping recovery operations when things go wrong (e.g. offset of user data block in a file). [dchinner: de-shout the xfs_rmap_*_owner helpers] [darrick: minor style fixes suggested by Christoph Hellwig] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-03 09:33:42 +08:00
STATIC int
xfs_free_ag_extent(
struct xfs_trans *tp,
struct xfs_buf *agbp,
xfs_agnumber_t agno,
xfs_agblock_t bno,
xfs_extlen_t len,
const struct xfs_owner_info *oinfo,
enum xfs_ag_resv_type type)
{
struct xfs_mount *mp;
struct xfs_btree_cur *bno_cur;
struct xfs_btree_cur *cnt_cur;
xfs_agblock_t gtbno; /* start of right neighbor */
xfs_extlen_t gtlen; /* length of right neighbor */
xfs_agblock_t ltbno; /* start of left neighbor */
xfs_extlen_t ltlen; /* length of left neighbor */
xfs_agblock_t nbno; /* new starting block of freesp */
xfs_extlen_t nlen; /* new length of freespace */
int haveleft; /* have a left neighbor */
int haveright; /* have a right neighbor */
int i;
int error;
struct xfs_perag *pag = agbp->b_pag;
bno_cur = cnt_cur = NULL;
mp = tp->t_mountp;
if (!xfs_rmap_should_skip_owner_update(oinfo)) {
error = xfs_rmap_free(tp, agbp, pag, bno, len, oinfo);
if (error)
goto error0;
}
/*
* Allocate and initialize a cursor for the by-block btree.
*/
bno_cur = xfs_allocbt_init_cursor(mp, tp, agbp, pag, XFS_BTNUM_BNO);
/*
* Look for a neighboring block on the left (lower block numbers)
* that is contiguous with this space.
*/
if ((error = xfs_alloc_lookup_le(bno_cur, bno, len, &haveleft)))
goto error0;
if (haveleft) {
/*
* There is a block to our left.
*/
if ((error = xfs_alloc_get_rec(bno_cur, &ltbno, &ltlen, &i)))
goto error0;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 1)) {
error = -EFSCORRUPTED;
goto error0;
}
/*
* It's not contiguous, though.
*/
if (ltbno + ltlen < bno)
haveleft = 0;
else {
/*
* If this failure happens the request to free this
* space was invalid, it's (partly) already free.
* Very bad.
*/
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, ltbno + ltlen > bno)) {
error = -EFSCORRUPTED;
goto error0;
}
}
}
/*
* Look for a neighboring block on the right (higher block numbers)
* that is contiguous with this space.
*/
if ((error = xfs_btree_increment(bno_cur, 0, &haveright)))
goto error0;
if (haveright) {
/*
* There is a block to our right.
*/
if ((error = xfs_alloc_get_rec(bno_cur, &gtbno, &gtlen, &i)))
goto error0;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 1)) {
error = -EFSCORRUPTED;
goto error0;
}
/*
* It's not contiguous, though.
*/
if (bno + len < gtbno)
haveright = 0;
else {
/*
* If this failure happens the request to free this
* space was invalid, it's (partly) already free.
* Very bad.
*/
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, bno + len > gtbno)) {
error = -EFSCORRUPTED;
goto error0;
}
}
}
/*
* Now allocate and initialize a cursor for the by-size tree.
*/
cnt_cur = xfs_allocbt_init_cursor(mp, tp, agbp, pag, XFS_BTNUM_CNT);
/*
* Have both left and right contiguous neighbors.
* Merge all three into a single free block.
*/
if (haveleft && haveright) {
/*
* Delete the old by-size entry on the left.
*/
if ((error = xfs_alloc_lookup_eq(cnt_cur, ltbno, ltlen, &i)))
goto error0;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 1)) {
error = -EFSCORRUPTED;
goto error0;
}
if ((error = xfs_btree_delete(cnt_cur, &i)))
goto error0;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 1)) {
error = -EFSCORRUPTED;
goto error0;
}
/*
* Delete the old by-size entry on the right.
*/
if ((error = xfs_alloc_lookup_eq(cnt_cur, gtbno, gtlen, &i)))
goto error0;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 1)) {
error = -EFSCORRUPTED;
goto error0;
}
if ((error = xfs_btree_delete(cnt_cur, &i)))
goto error0;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 1)) {
error = -EFSCORRUPTED;
goto error0;
}
/*
* Delete the old by-block entry for the right block.
*/
if ((error = xfs_btree_delete(bno_cur, &i)))
goto error0;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 1)) {
error = -EFSCORRUPTED;
goto error0;
}
/*
* Move the by-block cursor back to the left neighbor.
*/
if ((error = xfs_btree_decrement(bno_cur, 0, &i)))
goto error0;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 1)) {
error = -EFSCORRUPTED;
goto error0;
}
#ifdef DEBUG
/*
* Check that this is the right record: delete didn't
* mangle the cursor.
*/
{
xfs_agblock_t xxbno;
xfs_extlen_t xxlen;
if ((error = xfs_alloc_get_rec(bno_cur, &xxbno, &xxlen,
&i)))
goto error0;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp,
i != 1 ||
xxbno != ltbno ||
xxlen != ltlen)) {
error = -EFSCORRUPTED;
goto error0;
}
}
#endif
/*
* Update remaining by-block entry to the new, joined block.
*/
nbno = ltbno;
nlen = len + ltlen + gtlen;
if ((error = xfs_alloc_update(bno_cur, nbno, nlen)))
goto error0;
}
/*
* Have only a left contiguous neighbor.
* Merge it together with the new freespace.
*/
else if (haveleft) {
/*
* Delete the old by-size entry on the left.
*/
if ((error = xfs_alloc_lookup_eq(cnt_cur, ltbno, ltlen, &i)))
goto error0;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 1)) {
error = -EFSCORRUPTED;
goto error0;
}
if ((error = xfs_btree_delete(cnt_cur, &i)))
goto error0;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 1)) {
error = -EFSCORRUPTED;
goto error0;
}
/*
* Back up the by-block cursor to the left neighbor, and
* update its length.
*/
if ((error = xfs_btree_decrement(bno_cur, 0, &i)))
goto error0;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 1)) {
error = -EFSCORRUPTED;
goto error0;
}
nbno = ltbno;
nlen = len + ltlen;
if ((error = xfs_alloc_update(bno_cur, nbno, nlen)))
goto error0;
}
/*
* Have only a right contiguous neighbor.
* Merge it together with the new freespace.
*/
else if (haveright) {
/*
* Delete the old by-size entry on the right.
*/
if ((error = xfs_alloc_lookup_eq(cnt_cur, gtbno, gtlen, &i)))
goto error0;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 1)) {
error = -EFSCORRUPTED;
goto error0;
}
if ((error = xfs_btree_delete(cnt_cur, &i)))
goto error0;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 1)) {
error = -EFSCORRUPTED;
goto error0;
}
/*
* Update the starting block and length of the right
* neighbor in the by-block tree.
*/
nbno = bno;
nlen = len + gtlen;
if ((error = xfs_alloc_update(bno_cur, nbno, nlen)))
goto error0;
}
/*
* No contiguous neighbors.
* Insert the new freespace into the by-block tree.
*/
else {
nbno = bno;
nlen = len;
if ((error = xfs_btree_insert(bno_cur, &i)))
goto error0;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 1)) {
error = -EFSCORRUPTED;
goto error0;
}
}
xfs_btree_del_cursor(bno_cur, XFS_BTREE_NOERROR);
bno_cur = NULL;
/*
* In all cases we need to insert the new freespace in the by-size tree.
*/
if ((error = xfs_alloc_lookup_eq(cnt_cur, nbno, nlen, &i)))
goto error0;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 0)) {
error = -EFSCORRUPTED;
goto error0;
}
if ((error = xfs_btree_insert(cnt_cur, &i)))
goto error0;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, i != 1)) {
error = -EFSCORRUPTED;
goto error0;
}
xfs_btree_del_cursor(cnt_cur, XFS_BTREE_NOERROR);
cnt_cur = NULL;
/*
* Update the freespace totals in the ag and superblock.
*/
error = xfs_alloc_update_counters(tp, agbp, len);
xfs_ag_resv_free_extent(agbp->b_pag, type, tp, len);
if (error)
goto error0;
XFS_STATS_INC(mp, xs_freex);
XFS_STATS_ADD(mp, xs_freeb, len);
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-15 07:14:59 +08:00
trace_xfs_free_extent(mp, agno, bno, len, type, haveleft, haveright);
return 0;
error0:
trace_xfs_free_extent(mp, agno, bno, len, type, -1, -1);
if (bno_cur)
xfs_btree_del_cursor(bno_cur, XFS_BTREE_ERROR);
if (cnt_cur)
xfs_btree_del_cursor(cnt_cur, XFS_BTREE_ERROR);
return error;
}
/*
* Visible (exported) allocation/free functions.
* Some of these are used just by xfs_alloc_btree.c and this file.
*/
/*
* Compute and fill in value of m_alloc_maxlevels.
*/
void
xfs_alloc_compute_maxlevels(
xfs_mount_t *mp) /* file system mount structure */
{
mp->m_alloc_maxlevels = xfs_btree_compute_maxlevels(mp->m_alloc_mnr,
(mp->m_sb.sb_agblocks + 1) / 2);
ASSERT(mp->m_alloc_maxlevels <= xfs_allocbt_maxlevels_ondisk());
}
/*
xfs: set up per-AG free space reservations One unfortunate quirk of the reference count and reverse mapping btrees -- they can expand in size when blocks are written to *other* allocation groups if, say, one large extent becomes a lot of tiny extents. Since we don't want to start throwing errors in the middle of CoWing, we need to reserve some blocks to handle future expansion. The transaction block reservation counters aren't sufficient here because we have to have a reserve of blocks in every AG, not just somewhere in the filesystem. Therefore, create two per-AG block reservation pools. One feeds the AGFL so that rmapbt expansion always succeeds, and the other feeds all other metadata so that refcountbt expansion never fails. Use the count of how many reserved blocks we need to have on hand to create a virtual reservation in the AG. Through selective clamping of the maximum length of allocation requests and of the length of the longest free extent, we can make it look like there's less free space in the AG unless the reservation owner is asking for blocks. In other words, play some accounting tricks in-core to make sure that we always have blocks available. On the plus side, there's nothing to clean up if we crash, which is contrast to the strategy that the rough draft used (actually removing extents from the freespace btrees). Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-09-19 08:30:52 +08:00
* Find the length of the longest extent in an AG. The 'need' parameter
* specifies how much space we're going to need for the AGFL and the
* 'reserved' parameter tells us how many blocks in this AG are reserved for
* other callers.
*/
xfs_extlen_t
xfs_alloc_longest_free_extent(
struct xfs_perag *pag,
xfs: set up per-AG free space reservations One unfortunate quirk of the reference count and reverse mapping btrees -- they can expand in size when blocks are written to *other* allocation groups if, say, one large extent becomes a lot of tiny extents. Since we don't want to start throwing errors in the middle of CoWing, we need to reserve some blocks to handle future expansion. The transaction block reservation counters aren't sufficient here because we have to have a reserve of blocks in every AG, not just somewhere in the filesystem. Therefore, create two per-AG block reservation pools. One feeds the AGFL so that rmapbt expansion always succeeds, and the other feeds all other metadata so that refcountbt expansion never fails. Use the count of how many reserved blocks we need to have on hand to create a virtual reservation in the AG. Through selective clamping of the maximum length of allocation requests and of the length of the longest free extent, we can make it look like there's less free space in the AG unless the reservation owner is asking for blocks. In other words, play some accounting tricks in-core to make sure that we always have blocks available. On the plus side, there's nothing to clean up if we crash, which is contrast to the strategy that the rough draft used (actually removing extents from the freespace btrees). Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-09-19 08:30:52 +08:00
xfs_extlen_t need,
xfs_extlen_t reserved)
{
xfs_extlen_t delta = 0;
xfs: set up per-AG free space reservations One unfortunate quirk of the reference count and reverse mapping btrees -- they can expand in size when blocks are written to *other* allocation groups if, say, one large extent becomes a lot of tiny extents. Since we don't want to start throwing errors in the middle of CoWing, we need to reserve some blocks to handle future expansion. The transaction block reservation counters aren't sufficient here because we have to have a reserve of blocks in every AG, not just somewhere in the filesystem. Therefore, create two per-AG block reservation pools. One feeds the AGFL so that rmapbt expansion always succeeds, and the other feeds all other metadata so that refcountbt expansion never fails. Use the count of how many reserved blocks we need to have on hand to create a virtual reservation in the AG. Through selective clamping of the maximum length of allocation requests and of the length of the longest free extent, we can make it look like there's less free space in the AG unless the reservation owner is asking for blocks. In other words, play some accounting tricks in-core to make sure that we always have blocks available. On the plus side, there's nothing to clean up if we crash, which is contrast to the strategy that the rough draft used (actually removing extents from the freespace btrees). Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-09-19 08:30:52 +08:00
/*
* If the AGFL needs a recharge, we'll have to subtract that from the
* longest extent.
*/
if (need > pag->pagf_flcount)
delta = need - pag->pagf_flcount;
xfs: set up per-AG free space reservations One unfortunate quirk of the reference count and reverse mapping btrees -- they can expand in size when blocks are written to *other* allocation groups if, say, one large extent becomes a lot of tiny extents. Since we don't want to start throwing errors in the middle of CoWing, we need to reserve some blocks to handle future expansion. The transaction block reservation counters aren't sufficient here because we have to have a reserve of blocks in every AG, not just somewhere in the filesystem. Therefore, create two per-AG block reservation pools. One feeds the AGFL so that rmapbt expansion always succeeds, and the other feeds all other metadata so that refcountbt expansion never fails. Use the count of how many reserved blocks we need to have on hand to create a virtual reservation in the AG. Through selective clamping of the maximum length of allocation requests and of the length of the longest free extent, we can make it look like there's less free space in the AG unless the reservation owner is asking for blocks. In other words, play some accounting tricks in-core to make sure that we always have blocks available. On the plus side, there's nothing to clean up if we crash, which is contrast to the strategy that the rough draft used (actually removing extents from the freespace btrees). Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-09-19 08:30:52 +08:00
/*
* If we cannot maintain others' reservations with space from the
* not-longest freesp extents, we'll have to subtract /that/ from
* the longest extent too.
*/
if (pag->pagf_freeblks - pag->pagf_longest < reserved)
delta += reserved - (pag->pagf_freeblks - pag->pagf_longest);
/*
* If the longest extent is long enough to satisfy all the
* reservations and AGFL rules in place, we can return this extent.
*/
if (pag->pagf_longest > delta)
return min_t(xfs_extlen_t, pag->pag_mount->m_ag_max_usable,
pag->pagf_longest - delta);
xfs: set up per-AG free space reservations One unfortunate quirk of the reference count and reverse mapping btrees -- they can expand in size when blocks are written to *other* allocation groups if, say, one large extent becomes a lot of tiny extents. Since we don't want to start throwing errors in the middle of CoWing, we need to reserve some blocks to handle future expansion. The transaction block reservation counters aren't sufficient here because we have to have a reserve of blocks in every AG, not just somewhere in the filesystem. Therefore, create two per-AG block reservation pools. One feeds the AGFL so that rmapbt expansion always succeeds, and the other feeds all other metadata so that refcountbt expansion never fails. Use the count of how many reserved blocks we need to have on hand to create a virtual reservation in the AG. Through selective clamping of the maximum length of allocation requests and of the length of the longest free extent, we can make it look like there's less free space in the AG unless the reservation owner is asking for blocks. In other words, play some accounting tricks in-core to make sure that we always have blocks available. On the plus side, there's nothing to clean up if we crash, which is contrast to the strategy that the rough draft used (actually removing extents from the freespace btrees). Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-09-19 08:30:52 +08:00
/* Otherwise, let the caller try for 1 block if there's space. */
return pag->pagf_flcount > 0 || pag->pagf_longest > 0;
}
/*
* Compute the minimum length of the AGFL in the given AG. If @pag is NULL,
* return the largest possible minimum length.
*/
unsigned int
xfs_alloc_min_freelist(
struct xfs_mount *mp,
struct xfs_perag *pag)
{
/* AG btrees have at least 1 level. */
static const uint8_t fake_levels[XFS_BTNUM_AGF] = {1, 1, 1};
const uint8_t *levels = pag ? pag->pagf_levels : fake_levels;
unsigned int min_free;
ASSERT(mp->m_alloc_maxlevels > 0);
/* space needed by-bno freespace btree */
min_free = min_t(unsigned int, levels[XFS_BTNUM_BNOi] + 1,
mp->m_alloc_maxlevels);
/* space needed by-size freespace btree */
min_free += min_t(unsigned int, levels[XFS_BTNUM_CNTi] + 1,
mp->m_alloc_maxlevels);
/* space needed reverse mapping used space btree */
if (xfs_has_rmapbt(mp))
min_free += min_t(unsigned int, levels[XFS_BTNUM_RMAPi] + 1,
mp->m_rmap_maxlevels);
return min_free;
}
/*
* Check if the operation we are fixing up the freelist for should go ahead or
* not. If we are freeing blocks, we always allow it, otherwise the allocation
* is dependent on whether the size and shape of free space available will
* permit the requested allocation to take place.
*/
static bool
xfs_alloc_space_available(
struct xfs_alloc_arg *args,
xfs_extlen_t min_free,
int flags)
{
struct xfs_perag *pag = args->pag;
xfs_extlen_t alloc_len, longest;
xfs: set up per-AG free space reservations One unfortunate quirk of the reference count and reverse mapping btrees -- they can expand in size when blocks are written to *other* allocation groups if, say, one large extent becomes a lot of tiny extents. Since we don't want to start throwing errors in the middle of CoWing, we need to reserve some blocks to handle future expansion. The transaction block reservation counters aren't sufficient here because we have to have a reserve of blocks in every AG, not just somewhere in the filesystem. Therefore, create two per-AG block reservation pools. One feeds the AGFL so that rmapbt expansion always succeeds, and the other feeds all other metadata so that refcountbt expansion never fails. Use the count of how many reserved blocks we need to have on hand to create a virtual reservation in the AG. Through selective clamping of the maximum length of allocation requests and of the length of the longest free extent, we can make it look like there's less free space in the AG unless the reservation owner is asking for blocks. In other words, play some accounting tricks in-core to make sure that we always have blocks available. On the plus side, there's nothing to clean up if we crash, which is contrast to the strategy that the rough draft used (actually removing extents from the freespace btrees). Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-09-19 08:30:52 +08:00
xfs_extlen_t reservation; /* blocks that are still reserved */
int available;
xfs: don't account extra agfl blocks as available The block allocation AG selection code has parameters that allow a caller to perform multiple allocations from a single AG and transaction (under certain conditions). The parameters specify the total block allocation count required by the transaction and the AG selection code selects and locks an AG that will be able to satisfy the overall requirement. If the available block accounting calculation turns out to be inaccurate and a subsequent allocation call fails with -ENOSPC, the resulting transaction cancel leads to filesystem shutdown because the transaction is dirty. This exact problem can be reproduced with a highly parallel space consumer and fsstress workload running long enough to a large filesystem against -ENOSPC conditions. A bmbt block allocation request made for inode extent to bmap format conversion after an extent allocation is expected to be satisfied by the same AG and the same transaction as the extent allocation. The bmbt block allocation fails, however, because the block availability of the AG has changed since the AG was selected (outside of the blocks used for the extent itself). The inconsistent block availability calculation is caused by the deferred block freeing behavior of the AGFL. This immediately removes extra blocks from the AGFL to free up AGFL slots, but rather than immediately freeing such blocks as was done in the past, the block free is deferred such that said blocks are not available for allocation until the current transaction commits. The AG selection logic currently considers all AGFL blocks as available and executes shortly before any extra AGFL blocks are freed. This means the block availability of the current AG can change before the first allocation even occurs, but in practice a failure is more likely to manifest via a subsequent allocation because extent allocation usually has a contiguity requirement larger than a single block that can't be satisfied from the AGFL. In general, XFS prefers operational robustness to absolute allocation efficiency. In other words, we prefer to return -ENOSPC slightly earlier at the expense of not being able to allocate every last block in an AG to avoid this kind of problem. As such, update the AG block availability calculation to consider extra AGFL blocks as unavailable since they are immediately removed following the calculation and will not become available until the current transaction commits. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-04-12 22:39:21 +08:00
xfs_extlen_t agflcount;
if (flags & XFS_ALLOC_FLAG_FREEING)
return true;
xfs: set up per-AG free space reservations One unfortunate quirk of the reference count and reverse mapping btrees -- they can expand in size when blocks are written to *other* allocation groups if, say, one large extent becomes a lot of tiny extents. Since we don't want to start throwing errors in the middle of CoWing, we need to reserve some blocks to handle future expansion. The transaction block reservation counters aren't sufficient here because we have to have a reserve of blocks in every AG, not just somewhere in the filesystem. Therefore, create two per-AG block reservation pools. One feeds the AGFL so that rmapbt expansion always succeeds, and the other feeds all other metadata so that refcountbt expansion never fails. Use the count of how many reserved blocks we need to have on hand to create a virtual reservation in the AG. Through selective clamping of the maximum length of allocation requests and of the length of the longest free extent, we can make it look like there's less free space in the AG unless the reservation owner is asking for blocks. In other words, play some accounting tricks in-core to make sure that we always have blocks available. On the plus side, there's nothing to clean up if we crash, which is contrast to the strategy that the rough draft used (actually removing extents from the freespace btrees). Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-09-19 08:30:52 +08:00
reservation = xfs_ag_resv_needed(pag, args->resv);
/* do we have enough contiguous free space for the allocation? */
alloc_len = args->minlen + (args->alignment - 1) + args->minalignslop;
longest = xfs_alloc_longest_free_extent(pag, min_free, reservation);
if (longest < alloc_len)
return false;
xfs: don't account extra agfl blocks as available The block allocation AG selection code has parameters that allow a caller to perform multiple allocations from a single AG and transaction (under certain conditions). The parameters specify the total block allocation count required by the transaction and the AG selection code selects and locks an AG that will be able to satisfy the overall requirement. If the available block accounting calculation turns out to be inaccurate and a subsequent allocation call fails with -ENOSPC, the resulting transaction cancel leads to filesystem shutdown because the transaction is dirty. This exact problem can be reproduced with a highly parallel space consumer and fsstress workload running long enough to a large filesystem against -ENOSPC conditions. A bmbt block allocation request made for inode extent to bmap format conversion after an extent allocation is expected to be satisfied by the same AG and the same transaction as the extent allocation. The bmbt block allocation fails, however, because the block availability of the AG has changed since the AG was selected (outside of the blocks used for the extent itself). The inconsistent block availability calculation is caused by the deferred block freeing behavior of the AGFL. This immediately removes extra blocks from the AGFL to free up AGFL slots, but rather than immediately freeing such blocks as was done in the past, the block free is deferred such that said blocks are not available for allocation until the current transaction commits. The AG selection logic currently considers all AGFL blocks as available and executes shortly before any extra AGFL blocks are freed. This means the block availability of the current AG can change before the first allocation even occurs, but in practice a failure is more likely to manifest via a subsequent allocation because extent allocation usually has a contiguity requirement larger than a single block that can't be satisfied from the AGFL. In general, XFS prefers operational robustness to absolute allocation efficiency. In other words, we prefer to return -ENOSPC slightly earlier at the expense of not being able to allocate every last block in an AG to avoid this kind of problem. As such, update the AG block availability calculation to consider extra AGFL blocks as unavailable since they are immediately removed following the calculation and will not become available until the current transaction commits. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-04-12 22:39:21 +08:00
/*
* Do we have enough free space remaining for the allocation? Don't
* account extra agfl blocks because we are about to defer free them,
* making them unavailable until the current transaction commits.
*/
agflcount = min_t(xfs_extlen_t, pag->pagf_flcount, min_free);
available = (int)(pag->pagf_freeblks + agflcount -
reservation - min_free - args->minleft);
if (available < (int)max(args->total, alloc_len))
return false;
/*
* Clamp maxlen to the amount of free space available for the actual
* extent allocation.
*/
if (available < (int)args->maxlen && !(flags & XFS_ALLOC_FLAG_CHECK)) {
args->maxlen = available;
ASSERT(args->maxlen > 0);
ASSERT(args->maxlen >= args->minlen);
}
return true;
}
int
xfs_free_agfl_block(
struct xfs_trans *tp,
xfs_agnumber_t agno,
xfs_agblock_t agbno,
struct xfs_buf *agbp,
struct xfs_owner_info *oinfo)
{
int error;
struct xfs_buf *bp;
error = xfs_free_ag_extent(tp, agbp, agno, agbno, 1, oinfo,
XFS_AG_RESV_AGFL);
if (error)
return error;
error = xfs_trans_get_buf(tp, tp->t_mountp->m_ddev_targp,
XFS_AGB_TO_DADDR(tp->t_mountp, agno, agbno),
tp->t_mountp->m_bsize, 0, &bp);
if (error)
return error;
xfs_trans_binval(tp, bp);
return 0;
}
xfs: detect agfl count corruption and reset agfl The struct xfs_agfl v5 header was originally introduced with unexpected padding that caused the AGFL to operate with one less slot than intended. The header has since been packed, but the fix left an incompatibility for users who upgrade from an old kernel with the unpacked header to a newer kernel with the packed header while the AGFL happens to wrap around the end. The newer kernel recognizes one extra slot at the physical end of the AGFL that the previous kernel did not. The new kernel will eventually attempt to allocate a block from that slot, which contains invalid data, and cause a crash. This condition can be detected by comparing the active range of the AGFL to the count. While this detects a padding mismatch, it can also trigger false positives for unrelated flcount corruption. Since we cannot distinguish a size mismatch due to padding from unrelated corruption, we can't trust the AGFL enough to simply repopulate the empty slot. Instead, avoid unnecessarily complex detection logic and and use a solution that can handle any form of flcount corruption that slips through read verifiers: distrust the entire AGFL and reset it to an empty state. Any valid blocks within the AGFL are intentionally leaked. This requires xfs_repair to rectify (which was already necessary based on the state the AGFL was found in). The reset mitigates the side effect of the padding mismatch problem from a filesystem crash to a free space accounting inconsistency. The generic approach also means that this patch can be safely backported to kernels with or without a packed struct xfs_agfl. Check the AGF for an invalid freelist count on initial read from disk. If detected, set a flag on the xfs_perag to indicate that a reset is required before the AGFL can be used. In the first transaction that attempts to use a flagged AGFL, reset it to empty, warn the user about the inconsistency and allow the freelist fixup code to repopulate the AGFL with new blocks. The xfs_perag flag is cleared to eliminate the need for repeated checks on each block allocation operation. This allows kernels that include the packing fix commit 96f859d52bcb ("libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct") to handle older unpacked AGFL formats without a filesystem crash. Suggested-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by Dave Chiluk <chiluk+linuxxfs@indeed.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-16 01:51:58 +08:00
/*
* Check the agfl fields of the agf for inconsistency or corruption. The purpose
* is to detect an agfl header padding mismatch between current and early v5
* kernels. This problem manifests as a 1-slot size difference between the
* on-disk flcount and the active [first, last] range of a wrapped agfl. This
* may also catch variants of agfl count corruption unrelated to padding. Either
* way, we'll reset the agfl and warn the user.
*
* Return true if a reset is required before the agfl can be used, false
* otherwise.
*/
static bool
xfs_agfl_needs_reset(
struct xfs_mount *mp,
struct xfs_agf *agf)
{
uint32_t f = be32_to_cpu(agf->agf_flfirst);
uint32_t l = be32_to_cpu(agf->agf_fllast);
uint32_t c = be32_to_cpu(agf->agf_flcount);
int agfl_size = xfs_agfl_size(mp);
int active;
/* no agfl header on v4 supers */
if (!xfs_has_crc(mp))
xfs: detect agfl count corruption and reset agfl The struct xfs_agfl v5 header was originally introduced with unexpected padding that caused the AGFL to operate with one less slot than intended. The header has since been packed, but the fix left an incompatibility for users who upgrade from an old kernel with the unpacked header to a newer kernel with the packed header while the AGFL happens to wrap around the end. The newer kernel recognizes one extra slot at the physical end of the AGFL that the previous kernel did not. The new kernel will eventually attempt to allocate a block from that slot, which contains invalid data, and cause a crash. This condition can be detected by comparing the active range of the AGFL to the count. While this detects a padding mismatch, it can also trigger false positives for unrelated flcount corruption. Since we cannot distinguish a size mismatch due to padding from unrelated corruption, we can't trust the AGFL enough to simply repopulate the empty slot. Instead, avoid unnecessarily complex detection logic and and use a solution that can handle any form of flcount corruption that slips through read verifiers: distrust the entire AGFL and reset it to an empty state. Any valid blocks within the AGFL are intentionally leaked. This requires xfs_repair to rectify (which was already necessary based on the state the AGFL was found in). The reset mitigates the side effect of the padding mismatch problem from a filesystem crash to a free space accounting inconsistency. The generic approach also means that this patch can be safely backported to kernels with or without a packed struct xfs_agfl. Check the AGF for an invalid freelist count on initial read from disk. If detected, set a flag on the xfs_perag to indicate that a reset is required before the AGFL can be used. In the first transaction that attempts to use a flagged AGFL, reset it to empty, warn the user about the inconsistency and allow the freelist fixup code to repopulate the AGFL with new blocks. The xfs_perag flag is cleared to eliminate the need for repeated checks on each block allocation operation. This allows kernels that include the packing fix commit 96f859d52bcb ("libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct") to handle older unpacked AGFL formats without a filesystem crash. Suggested-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by Dave Chiluk <chiluk+linuxxfs@indeed.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-16 01:51:58 +08:00
return false;
/*
* The agf read verifier catches severe corruption of these fields.
* Repeat some sanity checks to cover a packed -> unpacked mismatch if
* the verifier allows it.
*/
if (f >= agfl_size || l >= agfl_size)
return true;
if (c > agfl_size)
return true;
/*
* Check consistency between the on-disk count and the active range. An
* agfl padding mismatch manifests as an inconsistent flcount.
*/
if (c && l >= f)
active = l - f + 1;
else if (c)
active = agfl_size - f + l + 1;
else
active = 0;
return active != c;
}
/*
* Reset the agfl to an empty state. Ignore/drop any existing blocks since the
* agfl content cannot be trusted. Warn the user that a repair is required to
* recover leaked blocks.
*
* The purpose of this mechanism is to handle filesystems affected by the agfl
* header padding mismatch problem. A reset keeps the filesystem online with a
* relatively minor free space accounting inconsistency rather than suffer the
* inevitable crash from use of an invalid agfl block.
*/
static void
xfs_agfl_reset(
struct xfs_trans *tp,
struct xfs_buf *agbp,
struct xfs_perag *pag)
{
struct xfs_mount *mp = tp->t_mountp;
struct xfs_agf *agf = agbp->b_addr;
xfs: detect agfl count corruption and reset agfl The struct xfs_agfl v5 header was originally introduced with unexpected padding that caused the AGFL to operate with one less slot than intended. The header has since been packed, but the fix left an incompatibility for users who upgrade from an old kernel with the unpacked header to a newer kernel with the packed header while the AGFL happens to wrap around the end. The newer kernel recognizes one extra slot at the physical end of the AGFL that the previous kernel did not. The new kernel will eventually attempt to allocate a block from that slot, which contains invalid data, and cause a crash. This condition can be detected by comparing the active range of the AGFL to the count. While this detects a padding mismatch, it can also trigger false positives for unrelated flcount corruption. Since we cannot distinguish a size mismatch due to padding from unrelated corruption, we can't trust the AGFL enough to simply repopulate the empty slot. Instead, avoid unnecessarily complex detection logic and and use a solution that can handle any form of flcount corruption that slips through read verifiers: distrust the entire AGFL and reset it to an empty state. Any valid blocks within the AGFL are intentionally leaked. This requires xfs_repair to rectify (which was already necessary based on the state the AGFL was found in). The reset mitigates the side effect of the padding mismatch problem from a filesystem crash to a free space accounting inconsistency. The generic approach also means that this patch can be safely backported to kernels with or without a packed struct xfs_agfl. Check the AGF for an invalid freelist count on initial read from disk. If detected, set a flag on the xfs_perag to indicate that a reset is required before the AGFL can be used. In the first transaction that attempts to use a flagged AGFL, reset it to empty, warn the user about the inconsistency and allow the freelist fixup code to repopulate the AGFL with new blocks. The xfs_perag flag is cleared to eliminate the need for repeated checks on each block allocation operation. This allows kernels that include the packing fix commit 96f859d52bcb ("libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct") to handle older unpacked AGFL formats without a filesystem crash. Suggested-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by Dave Chiluk <chiluk+linuxxfs@indeed.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-16 01:51:58 +08:00
ASSERT(xfs_perag_agfl_needs_reset(pag));
xfs: detect agfl count corruption and reset agfl The struct xfs_agfl v5 header was originally introduced with unexpected padding that caused the AGFL to operate with one less slot than intended. The header has since been packed, but the fix left an incompatibility for users who upgrade from an old kernel with the unpacked header to a newer kernel with the packed header while the AGFL happens to wrap around the end. The newer kernel recognizes one extra slot at the physical end of the AGFL that the previous kernel did not. The new kernel will eventually attempt to allocate a block from that slot, which contains invalid data, and cause a crash. This condition can be detected by comparing the active range of the AGFL to the count. While this detects a padding mismatch, it can also trigger false positives for unrelated flcount corruption. Since we cannot distinguish a size mismatch due to padding from unrelated corruption, we can't trust the AGFL enough to simply repopulate the empty slot. Instead, avoid unnecessarily complex detection logic and and use a solution that can handle any form of flcount corruption that slips through read verifiers: distrust the entire AGFL and reset it to an empty state. Any valid blocks within the AGFL are intentionally leaked. This requires xfs_repair to rectify (which was already necessary based on the state the AGFL was found in). The reset mitigates the side effect of the padding mismatch problem from a filesystem crash to a free space accounting inconsistency. The generic approach also means that this patch can be safely backported to kernels with or without a packed struct xfs_agfl. Check the AGF for an invalid freelist count on initial read from disk. If detected, set a flag on the xfs_perag to indicate that a reset is required before the AGFL can be used. In the first transaction that attempts to use a flagged AGFL, reset it to empty, warn the user about the inconsistency and allow the freelist fixup code to repopulate the AGFL with new blocks. The xfs_perag flag is cleared to eliminate the need for repeated checks on each block allocation operation. This allows kernels that include the packing fix commit 96f859d52bcb ("libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct") to handle older unpacked AGFL formats without a filesystem crash. Suggested-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by Dave Chiluk <chiluk+linuxxfs@indeed.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-16 01:51:58 +08:00
trace_xfs_agfl_reset(mp, agf, 0, _RET_IP_);
xfs_warn(mp,
"WARNING: Reset corrupted AGFL on AG %u. %d blocks leaked. "
"Please unmount and run xfs_repair.",
pag->pag_agno, pag->pagf_flcount);
agf->agf_flfirst = 0;
agf->agf_fllast = cpu_to_be32(xfs_agfl_size(mp) - 1);
agf->agf_flcount = 0;
xfs_alloc_log_agf(tp, agbp, XFS_AGF_FLFIRST | XFS_AGF_FLLAST |
XFS_AGF_FLCOUNT);
pag->pagf_flcount = 0;
clear_bit(XFS_AGSTATE_AGFL_NEEDS_RESET, &pag->pag_opstate);
xfs: detect agfl count corruption and reset agfl The struct xfs_agfl v5 header was originally introduced with unexpected padding that caused the AGFL to operate with one less slot than intended. The header has since been packed, but the fix left an incompatibility for users who upgrade from an old kernel with the unpacked header to a newer kernel with the packed header while the AGFL happens to wrap around the end. The newer kernel recognizes one extra slot at the physical end of the AGFL that the previous kernel did not. The new kernel will eventually attempt to allocate a block from that slot, which contains invalid data, and cause a crash. This condition can be detected by comparing the active range of the AGFL to the count. While this detects a padding mismatch, it can also trigger false positives for unrelated flcount corruption. Since we cannot distinguish a size mismatch due to padding from unrelated corruption, we can't trust the AGFL enough to simply repopulate the empty slot. Instead, avoid unnecessarily complex detection logic and and use a solution that can handle any form of flcount corruption that slips through read verifiers: distrust the entire AGFL and reset it to an empty state. Any valid blocks within the AGFL are intentionally leaked. This requires xfs_repair to rectify (which was already necessary based on the state the AGFL was found in). The reset mitigates the side effect of the padding mismatch problem from a filesystem crash to a free space accounting inconsistency. The generic approach also means that this patch can be safely backported to kernels with or without a packed struct xfs_agfl. Check the AGF for an invalid freelist count on initial read from disk. If detected, set a flag on the xfs_perag to indicate that a reset is required before the AGFL can be used. In the first transaction that attempts to use a flagged AGFL, reset it to empty, warn the user about the inconsistency and allow the freelist fixup code to repopulate the AGFL with new blocks. The xfs_perag flag is cleared to eliminate the need for repeated checks on each block allocation operation. This allows kernels that include the packing fix commit 96f859d52bcb ("libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct") to handle older unpacked AGFL formats without a filesystem crash. Suggested-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by Dave Chiluk <chiluk+linuxxfs@indeed.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-16 01:51:58 +08:00
}
xfs: defer agfl block frees when dfops is available The AGFL fixup code executes before every block allocation/free and rectifies the AGFL based on the current, dynamic allocation requirements of the fs. The AGFL must hold a minimum number of blocks to satisfy a worst case split of the free space btrees caused by the impending allocation operation. The AGFL is also updated to maintain the implicit requirement for a minimum number of free slots to satisfy a worst case join of the free space btrees. Since the AGFL caches individual blocks, AGFL reduction typically involves multiple, single block frees. We've had reports of transaction overrun problems during certain workloads that boil down to AGFL reduction freeing multiple blocks and consuming more space in the log than was reserved for the transaction. Since the objective of freeing AGFL blocks is to ensure free AGFL free slots are available for the upcoming allocation, one way to address this problem is to release surplus blocks from the AGFL immediately but defer the free of those blocks (similar to how file-mapped blocks are unmapped from the file in one transaction and freed via a deferred operation) until the transaction is rolled. This turns AGFL reduction into an operation with predictable log reservation consumption. Add the capability to defer AGFL block frees when a deferred ops list is available to the AGFL fixup code. Add a dfops pointer to the transaction to carry dfops through various contexts to the allocator context. Deferring AGFL frees is conditional behavior based on whether the transaction pointer is populated. The long term objective is to reuse the transaction pointer to clean up all unrelated callchains that pass dfops on the stack along with a transaction and in doing so, consistently defer AGFL blocks from the allocator. A bit of customization is required to handle deferred completion processing because AGFL blocks are accounted against a per-ag reservation pool and AGFL blocks are not inserted into the extent busy list when freed (they are inserted when used and released back to the AGFL). Reuse the majority of the existing deferred extent free infrastructure and customize it appropriately to handle AGFL blocks. Note that this patch only adds infrastructure. It does not change behavior because no callers have been updated to pass ->t_agfl_dfops into the allocation code. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-08 08:38:47 +08:00
/*
* Defer an AGFL block free. This is effectively equivalent to
* xfs_free_extent_later() with some special handling particular to AGFL blocks.
xfs: defer agfl block frees when dfops is available The AGFL fixup code executes before every block allocation/free and rectifies the AGFL based on the current, dynamic allocation requirements of the fs. The AGFL must hold a minimum number of blocks to satisfy a worst case split of the free space btrees caused by the impending allocation operation. The AGFL is also updated to maintain the implicit requirement for a minimum number of free slots to satisfy a worst case join of the free space btrees. Since the AGFL caches individual blocks, AGFL reduction typically involves multiple, single block frees. We've had reports of transaction overrun problems during certain workloads that boil down to AGFL reduction freeing multiple blocks and consuming more space in the log than was reserved for the transaction. Since the objective of freeing AGFL blocks is to ensure free AGFL free slots are available for the upcoming allocation, one way to address this problem is to release surplus blocks from the AGFL immediately but defer the free of those blocks (similar to how file-mapped blocks are unmapped from the file in one transaction and freed via a deferred operation) until the transaction is rolled. This turns AGFL reduction into an operation with predictable log reservation consumption. Add the capability to defer AGFL block frees when a deferred ops list is available to the AGFL fixup code. Add a dfops pointer to the transaction to carry dfops through various contexts to the allocator context. Deferring AGFL frees is conditional behavior based on whether the transaction pointer is populated. The long term objective is to reuse the transaction pointer to clean up all unrelated callchains that pass dfops on the stack along with a transaction and in doing so, consistently defer AGFL blocks from the allocator. A bit of customization is required to handle deferred completion processing because AGFL blocks are accounted against a per-ag reservation pool and AGFL blocks are not inserted into the extent busy list when freed (they are inserted when used and released back to the AGFL). Reuse the majority of the existing deferred extent free infrastructure and customize it appropriately to handle AGFL blocks. Note that this patch only adds infrastructure. It does not change behavior because no callers have been updated to pass ->t_agfl_dfops into the allocation code. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-08 08:38:47 +08:00
*
* Deferring AGFL frees helps prevent log reservation overruns due to too many
* allocation operations in a transaction. AGFL frees are prone to this problem
* because for one they are always freed one at a time. Further, an immediate
* AGFL block free can cause a btree join and require another block free before
* the real allocation can proceed. Deferring the free disconnects freeing up
* the AGFL slot from freeing the block.
*/
STATIC void
xfs_defer_agfl_block(
struct xfs_trans *tp,
xfs: defer agfl block frees when dfops is available The AGFL fixup code executes before every block allocation/free and rectifies the AGFL based on the current, dynamic allocation requirements of the fs. The AGFL must hold a minimum number of blocks to satisfy a worst case split of the free space btrees caused by the impending allocation operation. The AGFL is also updated to maintain the implicit requirement for a minimum number of free slots to satisfy a worst case join of the free space btrees. Since the AGFL caches individual blocks, AGFL reduction typically involves multiple, single block frees. We've had reports of transaction overrun problems during certain workloads that boil down to AGFL reduction freeing multiple blocks and consuming more space in the log than was reserved for the transaction. Since the objective of freeing AGFL blocks is to ensure free AGFL free slots are available for the upcoming allocation, one way to address this problem is to release surplus blocks from the AGFL immediately but defer the free of those blocks (similar to how file-mapped blocks are unmapped from the file in one transaction and freed via a deferred operation) until the transaction is rolled. This turns AGFL reduction into an operation with predictable log reservation consumption. Add the capability to defer AGFL block frees when a deferred ops list is available to the AGFL fixup code. Add a dfops pointer to the transaction to carry dfops through various contexts to the allocator context. Deferring AGFL frees is conditional behavior based on whether the transaction pointer is populated. The long term objective is to reuse the transaction pointer to clean up all unrelated callchains that pass dfops on the stack along with a transaction and in doing so, consistently defer AGFL blocks from the allocator. A bit of customization is required to handle deferred completion processing because AGFL blocks are accounted against a per-ag reservation pool and AGFL blocks are not inserted into the extent busy list when freed (they are inserted when used and released back to the AGFL). Reuse the majority of the existing deferred extent free infrastructure and customize it appropriately to handle AGFL blocks. Note that this patch only adds infrastructure. It does not change behavior because no callers have been updated to pass ->t_agfl_dfops into the allocation code. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-08 08:38:47 +08:00
xfs_agnumber_t agno,
xfs_fsblock_t agbno,
struct xfs_owner_info *oinfo)
{
struct xfs_mount *mp = tp->t_mountp;
struct xfs_extent_free_item *xefi;
xfs: defer agfl block frees when dfops is available The AGFL fixup code executes before every block allocation/free and rectifies the AGFL based on the current, dynamic allocation requirements of the fs. The AGFL must hold a minimum number of blocks to satisfy a worst case split of the free space btrees caused by the impending allocation operation. The AGFL is also updated to maintain the implicit requirement for a minimum number of free slots to satisfy a worst case join of the free space btrees. Since the AGFL caches individual blocks, AGFL reduction typically involves multiple, single block frees. We've had reports of transaction overrun problems during certain workloads that boil down to AGFL reduction freeing multiple blocks and consuming more space in the log than was reserved for the transaction. Since the objective of freeing AGFL blocks is to ensure free AGFL free slots are available for the upcoming allocation, one way to address this problem is to release surplus blocks from the AGFL immediately but defer the free of those blocks (similar to how file-mapped blocks are unmapped from the file in one transaction and freed via a deferred operation) until the transaction is rolled. This turns AGFL reduction into an operation with predictable log reservation consumption. Add the capability to defer AGFL block frees when a deferred ops list is available to the AGFL fixup code. Add a dfops pointer to the transaction to carry dfops through various contexts to the allocator context. Deferring AGFL frees is conditional behavior based on whether the transaction pointer is populated. The long term objective is to reuse the transaction pointer to clean up all unrelated callchains that pass dfops on the stack along with a transaction and in doing so, consistently defer AGFL blocks from the allocator. A bit of customization is required to handle deferred completion processing because AGFL blocks are accounted against a per-ag reservation pool and AGFL blocks are not inserted into the extent busy list when freed (they are inserted when used and released back to the AGFL). Reuse the majority of the existing deferred extent free infrastructure and customize it appropriately to handle AGFL blocks. Note that this patch only adds infrastructure. It does not change behavior because no callers have been updated to pass ->t_agfl_dfops into the allocation code. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-08 08:38:47 +08:00
ASSERT(xfs_extfree_item_cache != NULL);
xfs: defer agfl block frees when dfops is available The AGFL fixup code executes before every block allocation/free and rectifies the AGFL based on the current, dynamic allocation requirements of the fs. The AGFL must hold a minimum number of blocks to satisfy a worst case split of the free space btrees caused by the impending allocation operation. The AGFL is also updated to maintain the implicit requirement for a minimum number of free slots to satisfy a worst case join of the free space btrees. Since the AGFL caches individual blocks, AGFL reduction typically involves multiple, single block frees. We've had reports of transaction overrun problems during certain workloads that boil down to AGFL reduction freeing multiple blocks and consuming more space in the log than was reserved for the transaction. Since the objective of freeing AGFL blocks is to ensure free AGFL free slots are available for the upcoming allocation, one way to address this problem is to release surplus blocks from the AGFL immediately but defer the free of those blocks (similar to how file-mapped blocks are unmapped from the file in one transaction and freed via a deferred operation) until the transaction is rolled. This turns AGFL reduction into an operation with predictable log reservation consumption. Add the capability to defer AGFL block frees when a deferred ops list is available to the AGFL fixup code. Add a dfops pointer to the transaction to carry dfops through various contexts to the allocator context. Deferring AGFL frees is conditional behavior based on whether the transaction pointer is populated. The long term objective is to reuse the transaction pointer to clean up all unrelated callchains that pass dfops on the stack along with a transaction and in doing so, consistently defer AGFL blocks from the allocator. A bit of customization is required to handle deferred completion processing because AGFL blocks are accounted against a per-ag reservation pool and AGFL blocks are not inserted into the extent busy list when freed (they are inserted when used and released back to the AGFL). Reuse the majority of the existing deferred extent free infrastructure and customize it appropriately to handle AGFL blocks. Note that this patch only adds infrastructure. It does not change behavior because no callers have been updated to pass ->t_agfl_dfops into the allocation code. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-08 08:38:47 +08:00
ASSERT(oinfo != NULL);
xefi = kmem_cache_zalloc(xfs_extfree_item_cache,
GFP_KERNEL | __GFP_NOFAIL);
xefi->xefi_startblock = XFS_AGB_TO_FSB(mp, agno, agbno);
xefi->xefi_blockcount = 1;
xefi->xefi_owner = oinfo->oi_owner;
xfs: defer agfl block frees when dfops is available The AGFL fixup code executes before every block allocation/free and rectifies the AGFL based on the current, dynamic allocation requirements of the fs. The AGFL must hold a minimum number of blocks to satisfy a worst case split of the free space btrees caused by the impending allocation operation. The AGFL is also updated to maintain the implicit requirement for a minimum number of free slots to satisfy a worst case join of the free space btrees. Since the AGFL caches individual blocks, AGFL reduction typically involves multiple, single block frees. We've had reports of transaction overrun problems during certain workloads that boil down to AGFL reduction freeing multiple blocks and consuming more space in the log than was reserved for the transaction. Since the objective of freeing AGFL blocks is to ensure free AGFL free slots are available for the upcoming allocation, one way to address this problem is to release surplus blocks from the AGFL immediately but defer the free of those blocks (similar to how file-mapped blocks are unmapped from the file in one transaction and freed via a deferred operation) until the transaction is rolled. This turns AGFL reduction into an operation with predictable log reservation consumption. Add the capability to defer AGFL block frees when a deferred ops list is available to the AGFL fixup code. Add a dfops pointer to the transaction to carry dfops through various contexts to the allocator context. Deferring AGFL frees is conditional behavior based on whether the transaction pointer is populated. The long term objective is to reuse the transaction pointer to clean up all unrelated callchains that pass dfops on the stack along with a transaction and in doing so, consistently defer AGFL blocks from the allocator. A bit of customization is required to handle deferred completion processing because AGFL blocks are accounted against a per-ag reservation pool and AGFL blocks are not inserted into the extent busy list when freed (they are inserted when used and released back to the AGFL). Reuse the majority of the existing deferred extent free infrastructure and customize it appropriately to handle AGFL blocks. Note that this patch only adds infrastructure. It does not change behavior because no callers have been updated to pass ->t_agfl_dfops into the allocation code. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-08 08:38:47 +08:00
trace_xfs_agfl_free_defer(mp, agno, 0, agbno, 1);
xfs_extent_free_get_group(mp, xefi);
xfs_defer_add(tp, XFS_DEFER_OPS_TYPE_AGFL_FREE, &xefi->xefi_list);
xfs: defer agfl block frees when dfops is available The AGFL fixup code executes before every block allocation/free and rectifies the AGFL based on the current, dynamic allocation requirements of the fs. The AGFL must hold a minimum number of blocks to satisfy a worst case split of the free space btrees caused by the impending allocation operation. The AGFL is also updated to maintain the implicit requirement for a minimum number of free slots to satisfy a worst case join of the free space btrees. Since the AGFL caches individual blocks, AGFL reduction typically involves multiple, single block frees. We've had reports of transaction overrun problems during certain workloads that boil down to AGFL reduction freeing multiple blocks and consuming more space in the log than was reserved for the transaction. Since the objective of freeing AGFL blocks is to ensure free AGFL free slots are available for the upcoming allocation, one way to address this problem is to release surplus blocks from the AGFL immediately but defer the free of those blocks (similar to how file-mapped blocks are unmapped from the file in one transaction and freed via a deferred operation) until the transaction is rolled. This turns AGFL reduction into an operation with predictable log reservation consumption. Add the capability to defer AGFL block frees when a deferred ops list is available to the AGFL fixup code. Add a dfops pointer to the transaction to carry dfops through various contexts to the allocator context. Deferring AGFL frees is conditional behavior based on whether the transaction pointer is populated. The long term objective is to reuse the transaction pointer to clean up all unrelated callchains that pass dfops on the stack along with a transaction and in doing so, consistently defer AGFL blocks from the allocator. A bit of customization is required to handle deferred completion processing because AGFL blocks are accounted against a per-ag reservation pool and AGFL blocks are not inserted into the extent busy list when freed (they are inserted when used and released back to the AGFL). Reuse the majority of the existing deferred extent free infrastructure and customize it appropriately to handle AGFL blocks. Note that this patch only adds infrastructure. It does not change behavior because no callers have been updated to pass ->t_agfl_dfops into the allocation code. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-08 08:38:47 +08:00
}
/*
* Add the extent to the list of extents to be free at transaction end.
* The list is maintained sorted (by block number).
*/
void
__xfs_free_extent_later(
struct xfs_trans *tp,
xfs_fsblock_t bno,
xfs_filblks_t len,
const struct xfs_owner_info *oinfo,
bool skip_discard)
{
struct xfs_extent_free_item *xefi;
struct xfs_mount *mp = tp->t_mountp;
#ifdef DEBUG
xfs_agnumber_t agno;
xfs_agblock_t agbno;
ASSERT(bno != NULLFSBLOCK);
ASSERT(len > 0);
ASSERT(len <= XFS_MAX_BMBT_EXTLEN);
ASSERT(!isnullstartblock(bno));
agno = XFS_FSB_TO_AGNO(mp, bno);
agbno = XFS_FSB_TO_AGBNO(mp, bno);
ASSERT(agno < mp->m_sb.sb_agcount);
ASSERT(agbno < mp->m_sb.sb_agblocks);
ASSERT(len < mp->m_sb.sb_agblocks);
ASSERT(agbno + len <= mp->m_sb.sb_agblocks);
#endif
ASSERT(xfs_extfree_item_cache != NULL);
xefi = kmem_cache_zalloc(xfs_extfree_item_cache,
GFP_KERNEL | __GFP_NOFAIL);
xefi->xefi_startblock = bno;
xefi->xefi_blockcount = (xfs_extlen_t)len;
if (skip_discard)
xefi->xefi_flags |= XFS_EFI_SKIP_DISCARD;
if (oinfo) {
ASSERT(oinfo->oi_offset == 0);
if (oinfo->oi_flags & XFS_OWNER_INFO_ATTR_FORK)
xefi->xefi_flags |= XFS_EFI_ATTR_FORK;
if (oinfo->oi_flags & XFS_OWNER_INFO_BMBT_BLOCK)
xefi->xefi_flags |= XFS_EFI_BMBT_BLOCK;
xefi->xefi_owner = oinfo->oi_owner;
} else {
xefi->xefi_owner = XFS_RMAP_OWN_NULL;
}
trace_xfs_bmap_free_defer(mp,
XFS_FSB_TO_AGNO(tp->t_mountp, bno), 0,
XFS_FSB_TO_AGBNO(tp->t_mountp, bno), len);
xfs_extent_free_get_group(mp, xefi);
xfs_defer_add(tp, XFS_DEFER_OPS_TYPE_FREE, &xefi->xefi_list);
}
#ifdef DEBUG
/*
* Check if an AGF has a free extent record whose length is equal to
* args->minlen.
*/
STATIC int
xfs_exact_minlen_extent_available(
struct xfs_alloc_arg *args,
struct xfs_buf *agbp,
int *stat)
{
struct xfs_btree_cur *cnt_cur;
xfs_agblock_t fbno;
xfs_extlen_t flen;
int error = 0;
cnt_cur = xfs_allocbt_init_cursor(args->mp, args->tp, agbp,
args->pag, XFS_BTNUM_CNT);
error = xfs_alloc_lookup_ge(cnt_cur, 0, args->minlen, stat);
if (error)
goto out;
if (*stat == 0) {
error = -EFSCORRUPTED;
goto out;
}
error = xfs_alloc_get_rec(cnt_cur, &fbno, &flen, stat);
if (error)
goto out;
if (*stat == 1 && flen != args->minlen)
*stat = 0;
out:
xfs_btree_del_cursor(cnt_cur, error);
return error;
}
#endif
/*
* Decide whether to use this allocation group for this allocation.
* If so, fix up the btree freelist's size.
*/
int /* error */
xfs_alloc_fix_freelist(
struct xfs_alloc_arg *args, /* allocation argument structure */
int flags) /* XFS_ALLOC_FLAG_... */
{
struct xfs_mount *mp = args->mp;
struct xfs_perag *pag = args->pag;
struct xfs_trans *tp = args->tp;
struct xfs_buf *agbp = NULL;
struct xfs_buf *agflbp = NULL;
struct xfs_alloc_arg targs; /* local allocation arguments */
xfs_agblock_t bno; /* freelist block */
xfs_extlen_t need; /* total blocks needed in freelist */
int error = 0;
/* deferred ops (AGFL block frees) require permanent transactions */
ASSERT(tp->t_flags & XFS_TRANS_PERM_LOG_RES);
if (!xfs_perag_initialised_agf(pag)) {
error = xfs_alloc_read_agf(pag, tp, flags, &agbp);
if (error) {
/* Couldn't lock the AGF so skip this AG. */
if (error == -EAGAIN)
error = 0;
goto out_no_agbp;
}
}
/*
* If this is a metadata preferred pag and we are user data then try
* somewhere else if we are not being asked to try harder at this
* point
*/
if (xfs_perag_prefers_metadata(pag) &&
(args->datatype & XFS_ALLOC_USERDATA) &&
(flags & XFS_ALLOC_FLAG_TRYLOCK)) {
ASSERT(!(flags & XFS_ALLOC_FLAG_FREEING));
goto out_agbp_relse;
}
need = xfs_alloc_min_freelist(mp, pag);
if (!xfs_alloc_space_available(args, need, flags |
XFS_ALLOC_FLAG_CHECK))
goto out_agbp_relse;
/*
* Get the a.g. freespace buffer.
* Can fail if we're not blocking on locks, and it's held.
*/
if (!agbp) {
error = xfs_alloc_read_agf(pag, tp, flags, &agbp);
if (error) {
/* Couldn't lock the AGF so skip this AG. */
if (error == -EAGAIN)
error = 0;
goto out_no_agbp;
}
}
xfs: detect agfl count corruption and reset agfl The struct xfs_agfl v5 header was originally introduced with unexpected padding that caused the AGFL to operate with one less slot than intended. The header has since been packed, but the fix left an incompatibility for users who upgrade from an old kernel with the unpacked header to a newer kernel with the packed header while the AGFL happens to wrap around the end. The newer kernel recognizes one extra slot at the physical end of the AGFL that the previous kernel did not. The new kernel will eventually attempt to allocate a block from that slot, which contains invalid data, and cause a crash. This condition can be detected by comparing the active range of the AGFL to the count. While this detects a padding mismatch, it can also trigger false positives for unrelated flcount corruption. Since we cannot distinguish a size mismatch due to padding from unrelated corruption, we can't trust the AGFL enough to simply repopulate the empty slot. Instead, avoid unnecessarily complex detection logic and and use a solution that can handle any form of flcount corruption that slips through read verifiers: distrust the entire AGFL and reset it to an empty state. Any valid blocks within the AGFL are intentionally leaked. This requires xfs_repair to rectify (which was already necessary based on the state the AGFL was found in). The reset mitigates the side effect of the padding mismatch problem from a filesystem crash to a free space accounting inconsistency. The generic approach also means that this patch can be safely backported to kernels with or without a packed struct xfs_agfl. Check the AGF for an invalid freelist count on initial read from disk. If detected, set a flag on the xfs_perag to indicate that a reset is required before the AGFL can be used. In the first transaction that attempts to use a flagged AGFL, reset it to empty, warn the user about the inconsistency and allow the freelist fixup code to repopulate the AGFL with new blocks. The xfs_perag flag is cleared to eliminate the need for repeated checks on each block allocation operation. This allows kernels that include the packing fix commit 96f859d52bcb ("libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct") to handle older unpacked AGFL formats without a filesystem crash. Suggested-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by Dave Chiluk <chiluk+linuxxfs@indeed.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-16 01:51:58 +08:00
/* reset a padding mismatched agfl before final free space check */
if (xfs_perag_agfl_needs_reset(pag))
xfs: detect agfl count corruption and reset agfl The struct xfs_agfl v5 header was originally introduced with unexpected padding that caused the AGFL to operate with one less slot than intended. The header has since been packed, but the fix left an incompatibility for users who upgrade from an old kernel with the unpacked header to a newer kernel with the packed header while the AGFL happens to wrap around the end. The newer kernel recognizes one extra slot at the physical end of the AGFL that the previous kernel did not. The new kernel will eventually attempt to allocate a block from that slot, which contains invalid data, and cause a crash. This condition can be detected by comparing the active range of the AGFL to the count. While this detects a padding mismatch, it can also trigger false positives for unrelated flcount corruption. Since we cannot distinguish a size mismatch due to padding from unrelated corruption, we can't trust the AGFL enough to simply repopulate the empty slot. Instead, avoid unnecessarily complex detection logic and and use a solution that can handle any form of flcount corruption that slips through read verifiers: distrust the entire AGFL and reset it to an empty state. Any valid blocks within the AGFL are intentionally leaked. This requires xfs_repair to rectify (which was already necessary based on the state the AGFL was found in). The reset mitigates the side effect of the padding mismatch problem from a filesystem crash to a free space accounting inconsistency. The generic approach also means that this patch can be safely backported to kernels with or without a packed struct xfs_agfl. Check the AGF for an invalid freelist count on initial read from disk. If detected, set a flag on the xfs_perag to indicate that a reset is required before the AGFL can be used. In the first transaction that attempts to use a flagged AGFL, reset it to empty, warn the user about the inconsistency and allow the freelist fixup code to repopulate the AGFL with new blocks. The xfs_perag flag is cleared to eliminate the need for repeated checks on each block allocation operation. This allows kernels that include the packing fix commit 96f859d52bcb ("libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct") to handle older unpacked AGFL formats without a filesystem crash. Suggested-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by Dave Chiluk <chiluk+linuxxfs@indeed.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-16 01:51:58 +08:00
xfs_agfl_reset(tp, agbp, pag);
/* If there isn't enough total space or single-extent, reject it. */
need = xfs_alloc_min_freelist(mp, pag);
if (!xfs_alloc_space_available(args, need, flags))
goto out_agbp_relse;
#ifdef DEBUG
if (args->alloc_minlen_only) {
int stat;
error = xfs_exact_minlen_extent_available(args, agbp, &stat);
if (error || !stat)
goto out_agbp_relse;
}
#endif
/*
* Make the freelist shorter if it's too long.
*
* Note that from this point onwards, we will always release the agf and
* agfl buffers on error. This handles the case where we error out and
* the buffers are clean or may not have been joined to the transaction
* and hence need to be released manually. If they have been joined to
* the transaction, then xfs_trans_brelse() will handle them
* appropriately based on the recursion count and dirty state of the
* buffer.
*
* XXX (dgc): When we have lots of free space, does this buy us
* anything other than extra overhead when we need to put more blocks
* back on the free list? Maybe we should only do this when space is
* getting low or the AGFL is more than half full?
*
* The NOSHRINK flag prevents the AGFL from being shrunk if it's too
* big; the NORMAP flag prevents AGFL expand/shrink operations from
* updating the rmapbt. Both flags are used in xfs_repair while we're
* rebuilding the rmapbt, and neither are used by the kernel. They're
* both required to ensure that rmaps are correctly recorded for the
* regenerated AGFL, bnobt, and cntbt. See repair/phase5.c and
* repair/rmap.c in xfsprogs for details.
*/
memset(&targs, 0, sizeof(targs));
/* struct copy below */
if (flags & XFS_ALLOC_FLAG_NORMAP)
targs.oinfo = XFS_RMAP_OINFO_SKIP_UPDATE;
else
targs.oinfo = XFS_RMAP_OINFO_AG;
while (!(flags & XFS_ALLOC_FLAG_NOSHRINK) && pag->pagf_flcount > need) {
error = xfs_alloc_get_freelist(pag, tp, agbp, &bno, 0);
[XFS] Lazy Superblock Counters When we have a couple of hundred transactions on the fly at once, they all typically modify the on disk superblock in some way. create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify free block counts. When these counts are modified in a transaction, they must eventually lock the superblock buffer and apply the mods. The buffer then remains locked until the transaction is committed into the incore log buffer. The result of this is that with enough transactions on the fly the incore superblock buffer becomes a bottleneck. The result of contention on the incore superblock buffer is that transaction rates fall - the more pressure that is put on the superblock buffer, the slower things go. The key to removing the contention is to not require the superblock fields in question to be locked. We do that by not marking the superblock dirty in the transaction. IOWs, we modify the incore superblock but do not modify the cached superblock buffer. In short, we do not log superblock modifications to critical fields in the superblock on every transaction. In fact we only do it just before we write the superblock to disk every sync period or just before unmount. This creates an interesting problem - if we don't log or write out the fields in every transaction, then how do the values get recovered after a crash? the answer is simple - we keep enough duplicate, logged information in other structures that we can reconstruct the correct count after log recovery has been performed. It is the AGF and AGI structures that contain the duplicate information; after recovery, we walk every AGI and AGF and sum their individual counters to get the correct value, and we do a transaction into the log to correct them. An optimisation of this is that if we have a clean unmount record, we know the value in the superblock is correct, so we can avoid the summation walk under normal conditions and so mount/recovery times do not change under normal operation. One wrinkle that was discovered during development was that the blocks used in the freespace btrees are never accounted for in the AGF counters. This was once a valid optimisation to make; when the filesystem is full, the free space btrees are empty and consume no space. Hence when it matters, the "accounting" is correct. But that means the when we do the AGF summations, we would not have a correct count and xfs_check would complain. Hence a new counter was added to track the number of blocks used by the free space btrees. This is an *on-disk format change*. As a result of this, lazy superblock counters are a mkfs option and at the moment on linux there is no way to convert an old filesystem. This is possible - xfs_db can be used to twiddle the right bits and then xfs_repair will do the format conversion for you. Similarly, you can convert backwards as well. At some point we'll add functionality to xfs_admin to do the bit twiddling easily.... SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28652a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-24 13:26:31 +08:00
if (error)
goto out_agbp_relse;
/* defer agfl frees */
xfs_defer_agfl_block(tp, args->agno, bno, &targs.oinfo);
}
targs.tp = tp;
targs.mp = mp;
targs.agbp = agbp;
targs.agno = args->agno;
xfs: set up per-AG free space reservations One unfortunate quirk of the reference count and reverse mapping btrees -- they can expand in size when blocks are written to *other* allocation groups if, say, one large extent becomes a lot of tiny extents. Since we don't want to start throwing errors in the middle of CoWing, we need to reserve some blocks to handle future expansion. The transaction block reservation counters aren't sufficient here because we have to have a reserve of blocks in every AG, not just somewhere in the filesystem. Therefore, create two per-AG block reservation pools. One feeds the AGFL so that rmapbt expansion always succeeds, and the other feeds all other metadata so that refcountbt expansion never fails. Use the count of how many reserved blocks we need to have on hand to create a virtual reservation in the AG. Through selective clamping of the maximum length of allocation requests and of the length of the longest free extent, we can make it look like there's less free space in the AG unless the reservation owner is asking for blocks. In other words, play some accounting tricks in-core to make sure that we always have blocks available. On the plus side, there's nothing to clean up if we crash, which is contrast to the strategy that the rough draft used (actually removing extents from the freespace btrees). Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-09-19 08:30:52 +08:00
targs.alignment = targs.minlen = targs.prod = 1;
targs.pag = pag;
error = xfs_alloc_read_agfl(pag, tp, &agflbp);
if (error)
goto out_agbp_relse;
/* Make the freelist longer if it's too short. */
while (pag->pagf_flcount < need) {
targs.agbno = 0;
targs.maxlen = need - pag->pagf_flcount;
xfs: account only rmapbt-used blocks against rmapbt perag res The rmapbt perag metadata reservation reserves blocks for the reverse mapping btree (rmapbt). Since the rmapbt uses blocks from the agfl and perag accounting is updated as blocks are allocated from the allocation btrees, the reservation actually accounts blocks as they are allocated to (or freed from) the agfl rather than the rmapbt itself. While this works for blocks that are eventually used for the rmapbt, not all agfl blocks are destined for the rmapbt. Blocks that are allocated to the agfl (and thus "reserved" for the rmapbt) but then used by another structure leads to a growing inconsistency over time between the runtime tracking of rmapbt usage vs. actual rmapbt usage. Since the runtime tracking thinks all agfl blocks are rmapbt blocks, it essentially believes that less future reservation is required to satisfy the rmapbt than what is actually necessary. The inconsistency is rectified across mount cycles because the perag reservation is initialized based on the actual rmapbt usage at mount time. The problem, however, is that the excessive drain of the reservation at runtime opens a window to allocate blocks for other purposes that might be required for the rmapbt on a subsequent mount. This problem can be demonstrated by a simple test that runs an allocation workload to consume agfl blocks over time and then observe the difference in the agfl reservation requirement across an unmount/mount cycle: mount ...: xfs_ag_resv_init: ... resv 3193 ask 3194 len 3194 ... ... : xfs_ag_resv_alloc_extent: ... resv 2957 ask 3194 len 1 umount...: xfs_ag_resv_free: ... resv 2956 ask 3194 len 0 mount ...: xfs_ag_resv_init: ... resv 3052 ask 3194 len 3194 As the above tracepoints show, the reservation requirement reduces from 3194 blocks to 2956 blocks as the workload runs. Without any other changes in the filesystem, the same reservation requirement jumps from 2956 to 3052 blocks over a umount/mount cycle. To address this divergence, update the RMAPBT reservation to account blocks used for the rmapbt only rather than all blocks filled into the agfl. This patch makes several high-level changes toward that end: 1.) Reintroduce an AGFL reservation type to serve as an accounting no-op for blocks allocated to (or freed from) the AGFL. 2.) Invoke RMAPBT usage accounting from the actual rmapbt block allocation path rather than the AGFL allocation path. The first change is required because agfl blocks are considered free blocks throughout their lifetime. The perag reservation subsystem is invoked unconditionally by the allocation subsystem, so we need a way to tell the perag subsystem (via the allocation subsystem) to not make any accounting changes for blocks filled into the AGFL. The second change causes the in-core RMAPBT reservation usage accounting to remain consistent with the on-disk state at all times and eliminates the risk of leaving the rmapbt reservation underfilled. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-10 06:02:32 +08:00
targs.resv = XFS_AG_RESV_AGFL;
/* Allocate as many blocks as possible at once. */
error = xfs_alloc_ag_vextent_size(&targs);
if (error)
goto out_agflbp_relse;
/*
* Stop if we run out. Won't happen if callers are obeying
* the restrictions correctly. Can happen for free calls
* on a completely full ag.
*/
if (targs.agbno == NULLAGBLOCK) {
if (flags & XFS_ALLOC_FLAG_FREEING)
break;
goto out_agflbp_relse;
}
if (!xfs_rmap_should_skip_owner_update(&targs.oinfo)) {
error = xfs_rmap_alloc(tp, agbp, pag,
targs.agbno, targs.len, &targs.oinfo);
if (error)
goto out_agflbp_relse;
}
error = xfs_alloc_update_counters(tp, agbp,
-((long)(targs.len)));
if (error)
goto out_agflbp_relse;
/*
* Put each allocated block on the list.
*/
for (bno = targs.agbno; bno < targs.agbno + targs.len; bno++) {
error = xfs_alloc_put_freelist(pag, tp, agbp,
[XFS] Lazy Superblock Counters When we have a couple of hundred transactions on the fly at once, they all typically modify the on disk superblock in some way. create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify free block counts. When these counts are modified in a transaction, they must eventually lock the superblock buffer and apply the mods. The buffer then remains locked until the transaction is committed into the incore log buffer. The result of this is that with enough transactions on the fly the incore superblock buffer becomes a bottleneck. The result of contention on the incore superblock buffer is that transaction rates fall - the more pressure that is put on the superblock buffer, the slower things go. The key to removing the contention is to not require the superblock fields in question to be locked. We do that by not marking the superblock dirty in the transaction. IOWs, we modify the incore superblock but do not modify the cached superblock buffer. In short, we do not log superblock modifications to critical fields in the superblock on every transaction. In fact we only do it just before we write the superblock to disk every sync period or just before unmount. This creates an interesting problem - if we don't log or write out the fields in every transaction, then how do the values get recovered after a crash? the answer is simple - we keep enough duplicate, logged information in other structures that we can reconstruct the correct count after log recovery has been performed. It is the AGF and AGI structures that contain the duplicate information; after recovery, we walk every AGI and AGF and sum their individual counters to get the correct value, and we do a transaction into the log to correct them. An optimisation of this is that if we have a clean unmount record, we know the value in the superblock is correct, so we can avoid the summation walk under normal conditions and so mount/recovery times do not change under normal operation. One wrinkle that was discovered during development was that the blocks used in the freespace btrees are never accounted for in the AGF counters. This was once a valid optimisation to make; when the filesystem is full, the free space btrees are empty and consume no space. Hence when it matters, the "accounting" is correct. But that means the when we do the AGF summations, we would not have a correct count and xfs_check would complain. Hence a new counter was added to track the number of blocks used by the free space btrees. This is an *on-disk format change*. As a result of this, lazy superblock counters are a mkfs option and at the moment on linux there is no way to convert an old filesystem. This is possible - xfs_db can be used to twiddle the right bits and then xfs_repair will do the format conversion for you. Similarly, you can convert backwards as well. At some point we'll add functionality to xfs_admin to do the bit twiddling easily.... SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28652a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-24 13:26:31 +08:00
agflbp, bno, 0);
if (error)
goto out_agflbp_relse;
}
}
xfs_trans_brelse(tp, agflbp);
args->agbp = agbp;
return 0;
out_agflbp_relse:
xfs_trans_brelse(tp, agflbp);
out_agbp_relse:
if (agbp)
xfs_trans_brelse(tp, agbp);
out_no_agbp:
args->agbp = NULL;
return error;
}
/*
* Get a block from the freelist.
* Returns with the buffer for the block gotten.
*/
int
xfs_alloc_get_freelist(
struct xfs_perag *pag,
struct xfs_trans *tp,
struct xfs_buf *agbp,
xfs_agblock_t *bnop,
int btreeblk)
{
struct xfs_agf *agf = agbp->b_addr;
struct xfs_buf *agflbp;
xfs_agblock_t bno;
__be32 *agfl_bno;
int error;
uint32_t logflags;
struct xfs_mount *mp = tp->t_mountp;
/*
* Freelist is empty, give up.
*/
if (!agf->agf_flcount) {
*bnop = NULLAGBLOCK;
return 0;
}
/*
* Read the array of free blocks.
*/
error = xfs_alloc_read_agfl(pag, tp, &agflbp);
if (error)
return error;
/*
* Get the block number and update the data structures.
*/
agfl_bno = xfs_buf_to_agfl_bno(agflbp);
bno = be32_to_cpu(agfl_bno[be32_to_cpu(agf->agf_flfirst)]);
be32_add_cpu(&agf->agf_flfirst, 1);
xfs_trans_brelse(tp, agflbp);
if (be32_to_cpu(agf->agf_flfirst) == xfs_agfl_size(mp))
agf->agf_flfirst = 0;
ASSERT(!xfs_perag_agfl_needs_reset(pag));
be32_add_cpu(&agf->agf_flcount, -1);
pag->pagf_flcount--;
[XFS] Lazy Superblock Counters When we have a couple of hundred transactions on the fly at once, they all typically modify the on disk superblock in some way. create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify free block counts. When these counts are modified in a transaction, they must eventually lock the superblock buffer and apply the mods. The buffer then remains locked until the transaction is committed into the incore log buffer. The result of this is that with enough transactions on the fly the incore superblock buffer becomes a bottleneck. The result of contention on the incore superblock buffer is that transaction rates fall - the more pressure that is put on the superblock buffer, the slower things go. The key to removing the contention is to not require the superblock fields in question to be locked. We do that by not marking the superblock dirty in the transaction. IOWs, we modify the incore superblock but do not modify the cached superblock buffer. In short, we do not log superblock modifications to critical fields in the superblock on every transaction. In fact we only do it just before we write the superblock to disk every sync period or just before unmount. This creates an interesting problem - if we don't log or write out the fields in every transaction, then how do the values get recovered after a crash? the answer is simple - we keep enough duplicate, logged information in other structures that we can reconstruct the correct count after log recovery has been performed. It is the AGF and AGI structures that contain the duplicate information; after recovery, we walk every AGI and AGF and sum their individual counters to get the correct value, and we do a transaction into the log to correct them. An optimisation of this is that if we have a clean unmount record, we know the value in the superblock is correct, so we can avoid the summation walk under normal conditions and so mount/recovery times do not change under normal operation. One wrinkle that was discovered during development was that the blocks used in the freespace btrees are never accounted for in the AGF counters. This was once a valid optimisation to make; when the filesystem is full, the free space btrees are empty and consume no space. Hence when it matters, the "accounting" is correct. But that means the when we do the AGF summations, we would not have a correct count and xfs_check would complain. Hence a new counter was added to track the number of blocks used by the free space btrees. This is an *on-disk format change*. As a result of this, lazy superblock counters are a mkfs option and at the moment on linux there is no way to convert an old filesystem. This is possible - xfs_db can be used to twiddle the right bits and then xfs_repair will do the format conversion for you. Similarly, you can convert backwards as well. At some point we'll add functionality to xfs_admin to do the bit twiddling easily.... SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28652a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-24 13:26:31 +08:00
logflags = XFS_AGF_FLFIRST | XFS_AGF_FLCOUNT;
if (btreeblk) {
be32_add_cpu(&agf->agf_btreeblks, 1);
[XFS] Lazy Superblock Counters When we have a couple of hundred transactions on the fly at once, they all typically modify the on disk superblock in some way. create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify free block counts. When these counts are modified in a transaction, they must eventually lock the superblock buffer and apply the mods. The buffer then remains locked until the transaction is committed into the incore log buffer. The result of this is that with enough transactions on the fly the incore superblock buffer becomes a bottleneck. The result of contention on the incore superblock buffer is that transaction rates fall - the more pressure that is put on the superblock buffer, the slower things go. The key to removing the contention is to not require the superblock fields in question to be locked. We do that by not marking the superblock dirty in the transaction. IOWs, we modify the incore superblock but do not modify the cached superblock buffer. In short, we do not log superblock modifications to critical fields in the superblock on every transaction. In fact we only do it just before we write the superblock to disk every sync period or just before unmount. This creates an interesting problem - if we don't log or write out the fields in every transaction, then how do the values get recovered after a crash? the answer is simple - we keep enough duplicate, logged information in other structures that we can reconstruct the correct count after log recovery has been performed. It is the AGF and AGI structures that contain the duplicate information; after recovery, we walk every AGI and AGF and sum their individual counters to get the correct value, and we do a transaction into the log to correct them. An optimisation of this is that if we have a clean unmount record, we know the value in the superblock is correct, so we can avoid the summation walk under normal conditions and so mount/recovery times do not change under normal operation. One wrinkle that was discovered during development was that the blocks used in the freespace btrees are never accounted for in the AGF counters. This was once a valid optimisation to make; when the filesystem is full, the free space btrees are empty and consume no space. Hence when it matters, the "accounting" is correct. But that means the when we do the AGF summations, we would not have a correct count and xfs_check would complain. Hence a new counter was added to track the number of blocks used by the free space btrees. This is an *on-disk format change*. As a result of this, lazy superblock counters are a mkfs option and at the moment on linux there is no way to convert an old filesystem. This is possible - xfs_db can be used to twiddle the right bits and then xfs_repair will do the format conversion for you. Similarly, you can convert backwards as well. At some point we'll add functionality to xfs_admin to do the bit twiddling easily.... SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28652a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-24 13:26:31 +08:00
pag->pagf_btreeblks++;
logflags |= XFS_AGF_BTREEBLKS;
}
xfs_alloc_log_agf(tp, agbp, logflags);
*bnop = bno;
return 0;
}
/*
* Log the given fields from the agf structure.
*/
void
xfs_alloc_log_agf(
struct xfs_trans *tp,
struct xfs_buf *bp,
uint32_t fields)
{
int first; /* first byte offset */
int last; /* last byte offset */
static const short offsets[] = {
offsetof(xfs_agf_t, agf_magicnum),
offsetof(xfs_agf_t, agf_versionnum),
offsetof(xfs_agf_t, agf_seqno),
offsetof(xfs_agf_t, agf_length),
offsetof(xfs_agf_t, agf_roots[0]),
offsetof(xfs_agf_t, agf_levels[0]),
offsetof(xfs_agf_t, agf_flfirst),
offsetof(xfs_agf_t, agf_fllast),
offsetof(xfs_agf_t, agf_flcount),
offsetof(xfs_agf_t, agf_freeblks),
offsetof(xfs_agf_t, agf_longest),
[XFS] Lazy Superblock Counters When we have a couple of hundred transactions on the fly at once, they all typically modify the on disk superblock in some way. create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify free block counts. When these counts are modified in a transaction, they must eventually lock the superblock buffer and apply the mods. The buffer then remains locked until the transaction is committed into the incore log buffer. The result of this is that with enough transactions on the fly the incore superblock buffer becomes a bottleneck. The result of contention on the incore superblock buffer is that transaction rates fall - the more pressure that is put on the superblock buffer, the slower things go. The key to removing the contention is to not require the superblock fields in question to be locked. We do that by not marking the superblock dirty in the transaction. IOWs, we modify the incore superblock but do not modify the cached superblock buffer. In short, we do not log superblock modifications to critical fields in the superblock on every transaction. In fact we only do it just before we write the superblock to disk every sync period or just before unmount. This creates an interesting problem - if we don't log or write out the fields in every transaction, then how do the values get recovered after a crash? the answer is simple - we keep enough duplicate, logged information in other structures that we can reconstruct the correct count after log recovery has been performed. It is the AGF and AGI structures that contain the duplicate information; after recovery, we walk every AGI and AGF and sum their individual counters to get the correct value, and we do a transaction into the log to correct them. An optimisation of this is that if we have a clean unmount record, we know the value in the superblock is correct, so we can avoid the summation walk under normal conditions and so mount/recovery times do not change under normal operation. One wrinkle that was discovered during development was that the blocks used in the freespace btrees are never accounted for in the AGF counters. This was once a valid optimisation to make; when the filesystem is full, the free space btrees are empty and consume no space. Hence when it matters, the "accounting" is correct. But that means the when we do the AGF summations, we would not have a correct count and xfs_check would complain. Hence a new counter was added to track the number of blocks used by the free space btrees. This is an *on-disk format change*. As a result of this, lazy superblock counters are a mkfs option and at the moment on linux there is no way to convert an old filesystem. This is possible - xfs_db can be used to twiddle the right bits and then xfs_repair will do the format conversion for you. Similarly, you can convert backwards as well. At some point we'll add functionality to xfs_admin to do the bit twiddling easily.... SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28652a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-24 13:26:31 +08:00
offsetof(xfs_agf_t, agf_btreeblks),
offsetof(xfs_agf_t, agf_uuid),
offsetof(xfs_agf_t, agf_rmap_blocks),
offsetof(xfs_agf_t, agf_refcount_blocks),
offsetof(xfs_agf_t, agf_refcount_root),
offsetof(xfs_agf_t, agf_refcount_level),
/* needed so that we don't log the whole rest of the structure: */
offsetof(xfs_agf_t, agf_spare64),
sizeof(xfs_agf_t)
};
trace_xfs_agf(tp->t_mountp, bp->b_addr, fields, _RET_IP_);
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-15 07:14:59 +08:00
xfs_trans_buf_set_type(tp, bp, XFS_BLFT_AGF_BUF);
xfs_btree_offsets(fields, offsets, XFS_AGF_NUM_BITS, &first, &last);
xfs_trans_log_buf(tp, bp, (uint)first, (uint)last);
}
/*
* Put the block on the freelist for the allocation group.
*/
int
xfs_alloc_put_freelist(
struct xfs_perag *pag,
struct xfs_trans *tp,
struct xfs_buf *agbp,
struct xfs_buf *agflbp,
xfs_agblock_t bno,
int btreeblk)
{
struct xfs_mount *mp = tp->t_mountp;
struct xfs_agf *agf = agbp->b_addr;
__be32 *blockp;
int error;
uint32_t logflags;
__be32 *agfl_bno;
int startoff;
if (!agflbp) {
error = xfs_alloc_read_agfl(pag, tp, &agflbp);
if (error)
return error;
}
be32_add_cpu(&agf->agf_fllast, 1);
if (be32_to_cpu(agf->agf_fllast) == xfs_agfl_size(mp))
agf->agf_fllast = 0;
ASSERT(!xfs_perag_agfl_needs_reset(pag));
be32_add_cpu(&agf->agf_flcount, 1);
pag->pagf_flcount++;
[XFS] Lazy Superblock Counters When we have a couple of hundred transactions on the fly at once, they all typically modify the on disk superblock in some way. create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify free block counts. When these counts are modified in a transaction, they must eventually lock the superblock buffer and apply the mods. The buffer then remains locked until the transaction is committed into the incore log buffer. The result of this is that with enough transactions on the fly the incore superblock buffer becomes a bottleneck. The result of contention on the incore superblock buffer is that transaction rates fall - the more pressure that is put on the superblock buffer, the slower things go. The key to removing the contention is to not require the superblock fields in question to be locked. We do that by not marking the superblock dirty in the transaction. IOWs, we modify the incore superblock but do not modify the cached superblock buffer. In short, we do not log superblock modifications to critical fields in the superblock on every transaction. In fact we only do it just before we write the superblock to disk every sync period or just before unmount. This creates an interesting problem - if we don't log or write out the fields in every transaction, then how do the values get recovered after a crash? the answer is simple - we keep enough duplicate, logged information in other structures that we can reconstruct the correct count after log recovery has been performed. It is the AGF and AGI structures that contain the duplicate information; after recovery, we walk every AGI and AGF and sum their individual counters to get the correct value, and we do a transaction into the log to correct them. An optimisation of this is that if we have a clean unmount record, we know the value in the superblock is correct, so we can avoid the summation walk under normal conditions and so mount/recovery times do not change under normal operation. One wrinkle that was discovered during development was that the blocks used in the freespace btrees are never accounted for in the AGF counters. This was once a valid optimisation to make; when the filesystem is full, the free space btrees are empty and consume no space. Hence when it matters, the "accounting" is correct. But that means the when we do the AGF summations, we would not have a correct count and xfs_check would complain. Hence a new counter was added to track the number of blocks used by the free space btrees. This is an *on-disk format change*. As a result of this, lazy superblock counters are a mkfs option and at the moment on linux there is no way to convert an old filesystem. This is possible - xfs_db can be used to twiddle the right bits and then xfs_repair will do the format conversion for you. Similarly, you can convert backwards as well. At some point we'll add functionality to xfs_admin to do the bit twiddling easily.... SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28652a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-24 13:26:31 +08:00
logflags = XFS_AGF_FLLAST | XFS_AGF_FLCOUNT;
if (btreeblk) {
be32_add_cpu(&agf->agf_btreeblks, -1);
[XFS] Lazy Superblock Counters When we have a couple of hundred transactions on the fly at once, they all typically modify the on disk superblock in some way. create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify free block counts. When these counts are modified in a transaction, they must eventually lock the superblock buffer and apply the mods. The buffer then remains locked until the transaction is committed into the incore log buffer. The result of this is that with enough transactions on the fly the incore superblock buffer becomes a bottleneck. The result of contention on the incore superblock buffer is that transaction rates fall - the more pressure that is put on the superblock buffer, the slower things go. The key to removing the contention is to not require the superblock fields in question to be locked. We do that by not marking the superblock dirty in the transaction. IOWs, we modify the incore superblock but do not modify the cached superblock buffer. In short, we do not log superblock modifications to critical fields in the superblock on every transaction. In fact we only do it just before we write the superblock to disk every sync period or just before unmount. This creates an interesting problem - if we don't log or write out the fields in every transaction, then how do the values get recovered after a crash? the answer is simple - we keep enough duplicate, logged information in other structures that we can reconstruct the correct count after log recovery has been performed. It is the AGF and AGI structures that contain the duplicate information; after recovery, we walk every AGI and AGF and sum their individual counters to get the correct value, and we do a transaction into the log to correct them. An optimisation of this is that if we have a clean unmount record, we know the value in the superblock is correct, so we can avoid the summation walk under normal conditions and so mount/recovery times do not change under normal operation. One wrinkle that was discovered during development was that the blocks used in the freespace btrees are never accounted for in the AGF counters. This was once a valid optimisation to make; when the filesystem is full, the free space btrees are empty and consume no space. Hence when it matters, the "accounting" is correct. But that means the when we do the AGF summations, we would not have a correct count and xfs_check would complain. Hence a new counter was added to track the number of blocks used by the free space btrees. This is an *on-disk format change*. As a result of this, lazy superblock counters are a mkfs option and at the moment on linux there is no way to convert an old filesystem. This is possible - xfs_db can be used to twiddle the right bits and then xfs_repair will do the format conversion for you. Similarly, you can convert backwards as well. At some point we'll add functionality to xfs_admin to do the bit twiddling easily.... SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28652a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-24 13:26:31 +08:00
pag->pagf_btreeblks--;
logflags |= XFS_AGF_BTREEBLKS;
}
xfs_alloc_log_agf(tp, agbp, logflags);
ASSERT(be32_to_cpu(agf->agf_flcount) <= xfs_agfl_size(mp));
agfl_bno = xfs_buf_to_agfl_bno(agflbp);
blockp = &agfl_bno[be32_to_cpu(agf->agf_fllast)];
*blockp = cpu_to_be32(bno);
startoff = (char *)blockp - (char *)agflbp->b_addr;
[XFS] Lazy Superblock Counters When we have a couple of hundred transactions on the fly at once, they all typically modify the on disk superblock in some way. create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify free block counts. When these counts are modified in a transaction, they must eventually lock the superblock buffer and apply the mods. The buffer then remains locked until the transaction is committed into the incore log buffer. The result of this is that with enough transactions on the fly the incore superblock buffer becomes a bottleneck. The result of contention on the incore superblock buffer is that transaction rates fall - the more pressure that is put on the superblock buffer, the slower things go. The key to removing the contention is to not require the superblock fields in question to be locked. We do that by not marking the superblock dirty in the transaction. IOWs, we modify the incore superblock but do not modify the cached superblock buffer. In short, we do not log superblock modifications to critical fields in the superblock on every transaction. In fact we only do it just before we write the superblock to disk every sync period or just before unmount. This creates an interesting problem - if we don't log or write out the fields in every transaction, then how do the values get recovered after a crash? the answer is simple - we keep enough duplicate, logged information in other structures that we can reconstruct the correct count after log recovery has been performed. It is the AGF and AGI structures that contain the duplicate information; after recovery, we walk every AGI and AGF and sum their individual counters to get the correct value, and we do a transaction into the log to correct them. An optimisation of this is that if we have a clean unmount record, we know the value in the superblock is correct, so we can avoid the summation walk under normal conditions and so mount/recovery times do not change under normal operation. One wrinkle that was discovered during development was that the blocks used in the freespace btrees are never accounted for in the AGF counters. This was once a valid optimisation to make; when the filesystem is full, the free space btrees are empty and consume no space. Hence when it matters, the "accounting" is correct. But that means the when we do the AGF summations, we would not have a correct count and xfs_check would complain. Hence a new counter was added to track the number of blocks used by the free space btrees. This is an *on-disk format change*. As a result of this, lazy superblock counters are a mkfs option and at the moment on linux there is no way to convert an old filesystem. This is possible - xfs_db can be used to twiddle the right bits and then xfs_repair will do the format conversion for you. Similarly, you can convert backwards as well. At some point we'll add functionality to xfs_admin to do the bit twiddling easily.... SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28652a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-24 13:26:31 +08:00
xfs_alloc_log_agf(tp, agbp, logflags);
xfs_trans_buf_set_type(tp, agflbp, XFS_BLFT_AGFL_BUF);
xfs_trans_log_buf(tp, agflbp, startoff,
startoff + sizeof(xfs_agblock_t) - 1);
return 0;
}
static xfs_failaddr_t
xfs_agf_verify(
struct xfs_buf *bp)
{
struct xfs_mount *mp = bp->b_mount;
struct xfs_agf *agf = bp->b_addr;
if (xfs_has_crc(mp)) {
xfs: validate metadata LSNs against log on v5 superblocks Since the onset of v5 superblocks, the LSN of the last modification has been included in a variety of on-disk data structures. This LSN is used to provide log recovery ordering guarantees (e.g., to ensure an older log recovery item is not replayed over a newer target data structure). While this works correctly from the point a filesystem is formatted and mounted, userspace tools have some problematic behaviors that defeat this mechanism. For example, xfs_repair historically zeroes out the log unconditionally (regardless of whether corruption is detected). If this occurs, the LSN of the filesystem is reset and the log is now in a problematic state with respect to on-disk metadata structures that might have a larger LSN. Until either the log catches up to the highest previously used metadata LSN or each affected data structure is modified and written out without incident (which resets the metadata LSN), log recovery is susceptible to filesystem corruption. This problem is ultimately addressed and repaired in the associated userspace tools. The kernel is still responsible to detect the problem and notify the user that something is wrong. Check the superblock LSN at mount time and fail the mount if it is invalid. From that point on, trigger verifier failure on any metadata I/O where an invalid LSN is detected. This results in a filesystem shutdown and guarantees that we do not log metadata changes with invalid LSNs on disk. Since this is a known issue with a known recovery path, present a warning to instruct the user how to recover. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-10-12 12:59:25 +08:00
if (!uuid_equal(&agf->agf_uuid, &mp->m_sb.sb_meta_uuid))
return __this_address;
if (!xfs_log_check_lsn(mp, be64_to_cpu(agf->agf_lsn)))
return __this_address;
xfs: validate metadata LSNs against log on v5 superblocks Since the onset of v5 superblocks, the LSN of the last modification has been included in a variety of on-disk data structures. This LSN is used to provide log recovery ordering guarantees (e.g., to ensure an older log recovery item is not replayed over a newer target data structure). While this works correctly from the point a filesystem is formatted and mounted, userspace tools have some problematic behaviors that defeat this mechanism. For example, xfs_repair historically zeroes out the log unconditionally (regardless of whether corruption is detected). If this occurs, the LSN of the filesystem is reset and the log is now in a problematic state with respect to on-disk metadata structures that might have a larger LSN. Until either the log catches up to the highest previously used metadata LSN or each affected data structure is modified and written out without incident (which resets the metadata LSN), log recovery is susceptible to filesystem corruption. This problem is ultimately addressed and repaired in the associated userspace tools. The kernel is still responsible to detect the problem and notify the user that something is wrong. Check the superblock LSN at mount time and fail the mount if it is invalid. From that point on, trigger verifier failure on any metadata I/O where an invalid LSN is detected. This results in a filesystem shutdown and guarantees that we do not log metadata changes with invalid LSNs on disk. Since this is a known issue with a known recovery path, present a warning to instruct the user how to recover. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-10-12 12:59:25 +08:00
}
if (!xfs_verify_magic(bp, agf->agf_magicnum))
return __this_address;
if (!(XFS_AGF_GOOD_VERSION(be32_to_cpu(agf->agf_versionnum)) &&
be32_to_cpu(agf->agf_freeblks) <= be32_to_cpu(agf->agf_length) &&
be32_to_cpu(agf->agf_flfirst) < xfs_agfl_size(mp) &&
be32_to_cpu(agf->agf_fllast) < xfs_agfl_size(mp) &&
be32_to_cpu(agf->agf_flcount) <= xfs_agfl_size(mp)))
return __this_address;
xfs: add agf freeblocks verify in xfs_agf_verify We recently used fuzz(hydra) to test XFS and automatically generate tmp.img(XFS v5 format, but some metadata is wrong) xfs_repair information(just one AG): agf_freeblks 0, counted 3224 in ag 0 agf_longest 536874136, counted 3224 in ag 0 sb_fdblocks 613, counted 3228 Test as follows: mount tmp.img tmpdir cp file1M tmpdir sync In 4.19-stable, sync will stuck, the reason is: xfs_mountfs xfs_check_summary_counts if ((!xfs_sb_version_haslazysbcount(&mp->m_sb) || XFS_LAST_UNMOUNT_WAS_CLEAN(mp)) && !xfs_fs_has_sickness(mp, XFS_SICK_FS_COUNTERS)) return 0; -->just return, incore sb_fdblocks still be 613 xfs_initialize_perag_data cp file1M tmpdir -->ok(write file to pagecache) sync -->stuck(write pagecache to disk) xfs_map_blocks xfs_iomap_write_allocate while (count_fsb != 0) { nimaps = 0; while (nimaps == 0) { --> endless loop nimaps = 1; xfs_bmapi_write(..., &nimaps) --> nimaps becomes 0 again xfs_bmapi_write xfs_bmap_alloc xfs_bmap_btalloc xfs_alloc_vextent xfs_alloc_fix_freelist xfs_alloc_space_available -->fail(agf_freeblks is 0) In linux-next, sync not stuck, cause commit c2b3164320b5 ("xfs: use the latest extent at writeback delalloc conversion time") remove the above while, dmesg is as follows: [ 55.250114] XFS (loop0): page discard on page ffffea0008bc7380, inode 0x1b0c, offset 0. Users do not know why this page is discard, the better soultion is: 1. Like xfs_repair, make sure sb_fdblocks is equal to counted (xfs_initialize_perag_data did this, who is not called at this mount) 2. Add agf verify, if fail, will tell users to repair This patch use the second soultion. Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Signed-off-by: Ren Xudong <renxudong1@huawei.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-02-21 23:38:20 +08:00
if (be32_to_cpu(agf->agf_length) > mp->m_sb.sb_dblocks)
return __this_address;
if (be32_to_cpu(agf->agf_freeblks) < be32_to_cpu(agf->agf_longest) ||
be32_to_cpu(agf->agf_freeblks) > be32_to_cpu(agf->agf_length))
return __this_address;
if (be32_to_cpu(agf->agf_levels[XFS_BTNUM_BNO]) < 1 ||
be32_to_cpu(agf->agf_levels[XFS_BTNUM_CNT]) < 1 ||
be32_to_cpu(agf->agf_levels[XFS_BTNUM_BNO]) >
mp->m_alloc_maxlevels ||
be32_to_cpu(agf->agf_levels[XFS_BTNUM_CNT]) >
mp->m_alloc_maxlevels)
return __this_address;
if (xfs_has_rmapbt(mp) &&
(be32_to_cpu(agf->agf_levels[XFS_BTNUM_RMAP]) < 1 ||
be32_to_cpu(agf->agf_levels[XFS_BTNUM_RMAP]) >
mp->m_rmap_maxlevels))
return __this_address;
if (xfs_has_rmapbt(mp) &&
xfs: add agf freeblocks verify in xfs_agf_verify We recently used fuzz(hydra) to test XFS and automatically generate tmp.img(XFS v5 format, but some metadata is wrong) xfs_repair information(just one AG): agf_freeblks 0, counted 3224 in ag 0 agf_longest 536874136, counted 3224 in ag 0 sb_fdblocks 613, counted 3228 Test as follows: mount tmp.img tmpdir cp file1M tmpdir sync In 4.19-stable, sync will stuck, the reason is: xfs_mountfs xfs_check_summary_counts if ((!xfs_sb_version_haslazysbcount(&mp->m_sb) || XFS_LAST_UNMOUNT_WAS_CLEAN(mp)) && !xfs_fs_has_sickness(mp, XFS_SICK_FS_COUNTERS)) return 0; -->just return, incore sb_fdblocks still be 613 xfs_initialize_perag_data cp file1M tmpdir -->ok(write file to pagecache) sync -->stuck(write pagecache to disk) xfs_map_blocks xfs_iomap_write_allocate while (count_fsb != 0) { nimaps = 0; while (nimaps == 0) { --> endless loop nimaps = 1; xfs_bmapi_write(..., &nimaps) --> nimaps becomes 0 again xfs_bmapi_write xfs_bmap_alloc xfs_bmap_btalloc xfs_alloc_vextent xfs_alloc_fix_freelist xfs_alloc_space_available -->fail(agf_freeblks is 0) In linux-next, sync not stuck, cause commit c2b3164320b5 ("xfs: use the latest extent at writeback delalloc conversion time") remove the above while, dmesg is as follows: [ 55.250114] XFS (loop0): page discard on page ffffea0008bc7380, inode 0x1b0c, offset 0. Users do not know why this page is discard, the better soultion is: 1. Like xfs_repair, make sure sb_fdblocks is equal to counted (xfs_initialize_perag_data did this, who is not called at this mount) 2. Add agf verify, if fail, will tell users to repair This patch use the second soultion. Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Signed-off-by: Ren Xudong <renxudong1@huawei.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-02-21 23:38:20 +08:00
be32_to_cpu(agf->agf_rmap_blocks) > be32_to_cpu(agf->agf_length))
return __this_address;
/*
* during growfs operations, the perag is not fully initialised,
* so we can't use it for any useful checking. growfs ensures we can't
* use it by using uncached buffers that don't have the perag attached
* so we can detect and avoid this problem.
*/
if (bp->b_pag && be32_to_cpu(agf->agf_seqno) != bp->b_pag->pag_agno)
return __this_address;
if (xfs_has_lazysbcount(mp) &&
be32_to_cpu(agf->agf_btreeblks) > be32_to_cpu(agf->agf_length))
return __this_address;
if (xfs_has_reflink(mp) &&
xfs: add agf freeblocks verify in xfs_agf_verify We recently used fuzz(hydra) to test XFS and automatically generate tmp.img(XFS v5 format, but some metadata is wrong) xfs_repair information(just one AG): agf_freeblks 0, counted 3224 in ag 0 agf_longest 536874136, counted 3224 in ag 0 sb_fdblocks 613, counted 3228 Test as follows: mount tmp.img tmpdir cp file1M tmpdir sync In 4.19-stable, sync will stuck, the reason is: xfs_mountfs xfs_check_summary_counts if ((!xfs_sb_version_haslazysbcount(&mp->m_sb) || XFS_LAST_UNMOUNT_WAS_CLEAN(mp)) && !xfs_fs_has_sickness(mp, XFS_SICK_FS_COUNTERS)) return 0; -->just return, incore sb_fdblocks still be 613 xfs_initialize_perag_data cp file1M tmpdir -->ok(write file to pagecache) sync -->stuck(write pagecache to disk) xfs_map_blocks xfs_iomap_write_allocate while (count_fsb != 0) { nimaps = 0; while (nimaps == 0) { --> endless loop nimaps = 1; xfs_bmapi_write(..., &nimaps) --> nimaps becomes 0 again xfs_bmapi_write xfs_bmap_alloc xfs_bmap_btalloc xfs_alloc_vextent xfs_alloc_fix_freelist xfs_alloc_space_available -->fail(agf_freeblks is 0) In linux-next, sync not stuck, cause commit c2b3164320b5 ("xfs: use the latest extent at writeback delalloc conversion time") remove the above while, dmesg is as follows: [ 55.250114] XFS (loop0): page discard on page ffffea0008bc7380, inode 0x1b0c, offset 0. Users do not know why this page is discard, the better soultion is: 1. Like xfs_repair, make sure sb_fdblocks is equal to counted (xfs_initialize_perag_data did this, who is not called at this mount) 2. Add agf verify, if fail, will tell users to repair This patch use the second soultion. Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Signed-off-by: Ren Xudong <renxudong1@huawei.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-02-21 23:38:20 +08:00
be32_to_cpu(agf->agf_refcount_blocks) >
be32_to_cpu(agf->agf_length))
return __this_address;
if (xfs_has_reflink(mp) &&
(be32_to_cpu(agf->agf_refcount_level) < 1 ||
be32_to_cpu(agf->agf_refcount_level) > mp->m_refc_maxlevels))
return __this_address;
return NULL;
}
static void
xfs_agf_read_verify(
struct xfs_buf *bp)
{
struct xfs_mount *mp = bp->b_mount;
xfs_failaddr_t fa;
if (xfs_has_crc(mp) &&
!xfs_buf_verify_cksum(bp, XFS_AGF_CRC_OFF))
xfs_verifier_error(bp, -EFSBADCRC, __this_address);
else {
fa = xfs_agf_verify(bp);
if (XFS_TEST_ERROR(fa, mp, XFS_ERRTAG_ALLOC_READ_AGF))
xfs_verifier_error(bp, -EFSCORRUPTED, fa);
}
}
static void
xfs_agf_write_verify(
struct xfs_buf *bp)
{
struct xfs_mount *mp = bp->b_mount;
struct xfs_buf_log_item *bip = bp->b_log_item;
struct xfs_agf *agf = bp->b_addr;
xfs_failaddr_t fa;
fa = xfs_agf_verify(bp);
if (fa) {
xfs_verifier_error(bp, -EFSCORRUPTED, fa);
return;
}
if (!xfs_has_crc(mp))
return;
if (bip)
agf->agf_lsn = cpu_to_be64(bip->bli_item.li_lsn);
xfs_buf_update_cksum(bp, XFS_AGF_CRC_OFF);
}
const struct xfs_buf_ops xfs_agf_buf_ops = {
.name = "xfs_agf",
.magic = { cpu_to_be32(XFS_AGF_MAGIC), cpu_to_be32(XFS_AGF_MAGIC) },
.verify_read = xfs_agf_read_verify,
.verify_write = xfs_agf_write_verify,
.verify_struct = xfs_agf_verify,
};
/*
* Read in the allocation group header (free/alloc section).
*/
int
xfs_read_agf(
struct xfs_perag *pag,
struct xfs_trans *tp,
int flags,
struct xfs_buf **agfbpp)
{
struct xfs_mount *mp = pag->pag_mount;
int error;
trace_xfs_read_agf(pag->pag_mount, pag->pag_agno);
error = xfs_trans_read_buf(mp, tp, mp->m_ddev_targp,
XFS_AG_DADDR(mp, pag->pag_agno, XFS_AGF_DADDR(mp)),
XFS_FSS_TO_BB(mp, 1), flags, agfbpp, &xfs_agf_buf_ops);
if (error)
return error;
xfs_buf_set_ref(*agfbpp, XFS_AGF_REF);
return 0;
}
/*
* Read in the allocation group header (free/alloc section) and initialise the
* perag structure if necessary. If the caller provides @agfbpp, then return the
* locked buffer to the caller, otherwise free it.
*/
int
xfs_alloc_read_agf(
struct xfs_perag *pag,
struct xfs_trans *tp,
int flags,
struct xfs_buf **agfbpp)
{
struct xfs_buf *agfbp;
struct xfs_agf *agf;
int error;
int allocbt_blks;
trace_xfs_alloc_read_agf(pag->pag_mount, pag->pag_agno);
/* We don't support trylock when freeing. */
ASSERT((flags & (XFS_ALLOC_FLAG_FREEING | XFS_ALLOC_FLAG_TRYLOCK)) !=
(XFS_ALLOC_FLAG_FREEING | XFS_ALLOC_FLAG_TRYLOCK));
error = xfs_read_agf(pag, tp,
(flags & XFS_ALLOC_FLAG_TRYLOCK) ? XBF_TRYLOCK : 0,
&agfbp);
if (error)
return error;
agf = agfbp->b_addr;
if (!xfs_perag_initialised_agf(pag)) {
pag->pagf_freeblks = be32_to_cpu(agf->agf_freeblks);
[XFS] Lazy Superblock Counters When we have a couple of hundred transactions on the fly at once, they all typically modify the on disk superblock in some way. create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify free block counts. When these counts are modified in a transaction, they must eventually lock the superblock buffer and apply the mods. The buffer then remains locked until the transaction is committed into the incore log buffer. The result of this is that with enough transactions on the fly the incore superblock buffer becomes a bottleneck. The result of contention on the incore superblock buffer is that transaction rates fall - the more pressure that is put on the superblock buffer, the slower things go. The key to removing the contention is to not require the superblock fields in question to be locked. We do that by not marking the superblock dirty in the transaction. IOWs, we modify the incore superblock but do not modify the cached superblock buffer. In short, we do not log superblock modifications to critical fields in the superblock on every transaction. In fact we only do it just before we write the superblock to disk every sync period or just before unmount. This creates an interesting problem - if we don't log or write out the fields in every transaction, then how do the values get recovered after a crash? the answer is simple - we keep enough duplicate, logged information in other structures that we can reconstruct the correct count after log recovery has been performed. It is the AGF and AGI structures that contain the duplicate information; after recovery, we walk every AGI and AGF and sum their individual counters to get the correct value, and we do a transaction into the log to correct them. An optimisation of this is that if we have a clean unmount record, we know the value in the superblock is correct, so we can avoid the summation walk under normal conditions and so mount/recovery times do not change under normal operation. One wrinkle that was discovered during development was that the blocks used in the freespace btrees are never accounted for in the AGF counters. This was once a valid optimisation to make; when the filesystem is full, the free space btrees are empty and consume no space. Hence when it matters, the "accounting" is correct. But that means the when we do the AGF summations, we would not have a correct count and xfs_check would complain. Hence a new counter was added to track the number of blocks used by the free space btrees. This is an *on-disk format change*. As a result of this, lazy superblock counters are a mkfs option and at the moment on linux there is no way to convert an old filesystem. This is possible - xfs_db can be used to twiddle the right bits and then xfs_repair will do the format conversion for you. Similarly, you can convert backwards as well. At some point we'll add functionality to xfs_admin to do the bit twiddling easily.... SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28652a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-24 13:26:31 +08:00
pag->pagf_btreeblks = be32_to_cpu(agf->agf_btreeblks);
pag->pagf_flcount = be32_to_cpu(agf->agf_flcount);
pag->pagf_longest = be32_to_cpu(agf->agf_longest);
pag->pagf_levels[XFS_BTNUM_BNOi] =
be32_to_cpu(agf->agf_levels[XFS_BTNUM_BNOi]);
pag->pagf_levels[XFS_BTNUM_CNTi] =
be32_to_cpu(agf->agf_levels[XFS_BTNUM_CNTi]);
pag->pagf_levels[XFS_BTNUM_RMAPi] =
be32_to_cpu(agf->agf_levels[XFS_BTNUM_RMAPi]);
pag->pagf_refcount_level = be32_to_cpu(agf->agf_refcount_level);
if (xfs_agfl_needs_reset(pag->pag_mount, agf))
set_bit(XFS_AGSTATE_AGFL_NEEDS_RESET, &pag->pag_opstate);
else
clear_bit(XFS_AGSTATE_AGFL_NEEDS_RESET, &pag->pag_opstate);
/*
* Update the in-core allocbt counter. Filter out the rmapbt
* subset of the btreeblks counter because the rmapbt is managed
* by perag reservation. Subtract one for the rmapbt root block
* because the rmap counter includes it while the btreeblks
* counter only tracks non-root blocks.
*/
allocbt_blks = pag->pagf_btreeblks;
if (xfs_has_rmapbt(pag->pag_mount))
allocbt_blks -= be32_to_cpu(agf->agf_rmap_blocks) - 1;
if (allocbt_blks > 0)
atomic64_add(allocbt_blks,
&pag->pag_mount->m_allocbt_blks);
set_bit(XFS_AGSTATE_AGF_INIT, &pag->pag_opstate);
}
#ifdef DEBUG
else if (!xfs_is_shutdown(pag->pag_mount)) {
ASSERT(pag->pagf_freeblks == be32_to_cpu(agf->agf_freeblks));
ASSERT(pag->pagf_btreeblks == be32_to_cpu(agf->agf_btreeblks));
ASSERT(pag->pagf_flcount == be32_to_cpu(agf->agf_flcount));
ASSERT(pag->pagf_longest == be32_to_cpu(agf->agf_longest));
ASSERT(pag->pagf_levels[XFS_BTNUM_BNOi] ==
be32_to_cpu(agf->agf_levels[XFS_BTNUM_BNOi]));
ASSERT(pag->pagf_levels[XFS_BTNUM_CNTi] ==
be32_to_cpu(agf->agf_levels[XFS_BTNUM_CNTi]));
}
#endif
if (agfbpp)
*agfbpp = agfbp;
else
xfs_trans_brelse(tp, agfbp);
return 0;
}
/*
* Pre-proces allocation arguments to set initial state that we don't require
* callers to set up correctly, as well as bounds check the allocation args
* that are set up.
*/
static int
xfs_alloc_vextent_check_args(
struct xfs_alloc_arg *args,
xfs_fsblock_t target,
xfs_agnumber_t *minimum_agno)
{
struct xfs_mount *mp = args->mp;
xfs_agblock_t agsize;
args->fsbno = NULLFSBLOCK;
*minimum_agno = 0;
if (args->tp->t_highest_agno != NULLAGNUMBER)
*minimum_agno = args->tp->t_highest_agno;
/*
* Just fix this up, for the case where the last a.g. is shorter
* (or there's only one a.g.) and the caller couldn't easily figure
* that out (xfs_bmap_alloc).
*/
agsize = mp->m_sb.sb_agblocks;
if (args->maxlen > agsize)
args->maxlen = agsize;
if (args->alignment == 0)
args->alignment = 1;
ASSERT(args->minlen > 0);
ASSERT(args->maxlen > 0);
ASSERT(args->alignment > 0);
ASSERT(args->resv != XFS_AG_RESV_AGFL);
ASSERT(XFS_FSB_TO_AGNO(mp, target) < mp->m_sb.sb_agcount);
ASSERT(XFS_FSB_TO_AGBNO(mp, target) < agsize);
ASSERT(args->minlen <= args->maxlen);
ASSERT(args->minlen <= agsize);
ASSERT(args->mod < args->prod);
if (XFS_FSB_TO_AGNO(mp, target) >= mp->m_sb.sb_agcount ||
XFS_FSB_TO_AGBNO(mp, target) >= agsize ||
args->minlen > args->maxlen || args->minlen > agsize ||
args->mod >= args->prod) {
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-15 07:14:59 +08:00
trace_xfs_alloc_vextent_badargs(args);
return -ENOSPC;
}
if (args->agno != NULLAGNUMBER && *minimum_agno > args->agno) {
trace_xfs_alloc_vextent_skip_deadlock(args);
return -ENOSPC;
}
return 0;
}
/*
* Prepare an AG for allocation. If the AG is not prepared to accept the
* allocation, return failure.
*
* XXX(dgc): The complexity of "need_pag" will go away as all caller paths are
* modified to hold their own perag references.
*/
static int
xfs_alloc_vextent_prepare_ag(
struct xfs_alloc_arg *args)
{
bool need_pag = !args->pag;
int error;
if (need_pag)
args->pag = xfs_perag_get(args->mp, args->agno);
args->agbp = NULL;
error = xfs_alloc_fix_freelist(args, 0);
if (error) {
trace_xfs_alloc_vextent_nofix(args);
if (need_pag)
xfs_perag_put(args->pag);
args->agbno = NULLAGBLOCK;
return error;
}
if (!args->agbp) {
/* cannot allocate in this AG at all */
trace_xfs_alloc_vextent_noagbp(args);
args->agbno = NULLAGBLOCK;
return 0;
}
args->wasfromfl = 0;
return 0;
}
/*
* Post-process allocation results to account for the allocation if it succeed
* and set the allocated block number correctly for the caller.
*
* XXX: we should really be returning ENOSPC for ENOSPC, not
* hiding it behind a "successful" NULLFSBLOCK allocation.
*/
static int
xfs_alloc_vextent_finish(
struct xfs_alloc_arg *args,
xfs_agnumber_t minimum_agno,
int alloc_error,
bool drop_perag)
{
struct xfs_mount *mp = args->mp;
int error = 0;
/*
* We can end up here with a locked AGF. If we failed, the caller is
* likely going to try to allocate again with different parameters, and
* that can widen the AGs that are searched for free space. If we have
* to do BMBT block allocation, we have to do a new allocation.
*
* Hence leaving this function with the AGF locked opens up potential
* ABBA AGF deadlocks because a future allocation attempt in this
* transaction may attempt to lock a lower number AGF.
*
* We can't release the AGF until the transaction is commited, so at
* this point we must update the "first allocation" tracker to point at
* this AG if the tracker is empty or points to a lower AG. This allows
* the next allocation attempt to be modified appropriately to avoid
* deadlocks.
*/
if (args->agbp &&
(args->tp->t_highest_agno == NULLAGNUMBER ||
args->agno > minimum_agno))
args->tp->t_highest_agno = args->agno;
/*
* If the allocation failed with an error or we had an ENOSPC result,
* preserve the returned error whilst also marking the allocation result
* as "no extent allocated". This ensures that callers that fail to
* capture the error will still treat it as a failed allocation.
*/
if (alloc_error || args->agbno == NULLAGBLOCK) {
args->fsbno = NULLFSBLOCK;
error = alloc_error;
goto out_drop_perag;
}
args->fsbno = XFS_AGB_TO_FSB(mp, args->agno, args->agbno);
ASSERT(args->len >= args->minlen);
ASSERT(args->len <= args->maxlen);
ASSERT(args->agbno % args->alignment == 0);
XFS_AG_CHECK_DADDR(mp, XFS_FSB_TO_DADDR(mp, args->fsbno), args->len);
/* if not file data, insert new block into the reverse map btree */
if (!xfs_rmap_should_skip_owner_update(&args->oinfo)) {
error = xfs_rmap_alloc(args->tp, args->agbp, args->pag,
args->agbno, args->len, &args->oinfo);
if (error)
goto out_drop_perag;
}
if (!args->wasfromfl) {
error = xfs_alloc_update_counters(args->tp, args->agbp,
-((long)(args->len)));
if (error)
goto out_drop_perag;
ASSERT(!xfs_extent_busy_search(mp, args->pag, args->agbno,
args->len));
}
xfs_ag_resv_alloc_extent(args->pag, args->resv, args);
XFS_STATS_INC(mp, xs_allocx);
XFS_STATS_ADD(mp, xs_allocb, args->len);
trace_xfs_alloc_vextent_finish(args);
out_drop_perag:
if (drop_perag && args->pag) {
xfs_perag_rele(args->pag);
args->pag = NULL;
}
return error;
}
/*
* Allocate within a single AG only. This uses a best-fit length algorithm so if
* you need an exact sized allocation without locality constraints, this is the
* fastest way to do it.
*
* Caller is expected to hold a perag reference in args->pag.
*/
int
xfs_alloc_vextent_this_ag(
struct xfs_alloc_arg *args,
xfs_agnumber_t agno)
{
struct xfs_mount *mp = args->mp;
xfs_agnumber_t minimum_agno;
int error;
ASSERT(args->pag != NULL);
ASSERT(args->pag->pag_agno == agno);
args->agno = agno;
args->agbno = 0;
trace_xfs_alloc_vextent_this_ag(args);
error = xfs_alloc_vextent_check_args(args, XFS_AGB_TO_FSB(mp, agno, 0),
&minimum_agno);
if (error) {
if (error == -ENOSPC)
return 0;
return error;
}
error = xfs_alloc_vextent_prepare_ag(args);
if (!error && args->agbp)
error = xfs_alloc_ag_vextent_size(args);
return xfs_alloc_vextent_finish(args, minimum_agno, error, false);
}
/*
* Iterate all AGs trying to allocate an extent starting from @start_ag.
*
* If the incoming allocation type is XFS_ALLOCTYPE_NEAR_BNO, it means the
* allocation attempts in @start_agno have locality information. If we fail to
* allocate in that AG, then we revert to anywhere-in-AG for all the other AGs
* we attempt to allocation in as there is no locality optimisation possible for
* those allocations.
*
* On return, args->pag may be left referenced if we finish before the "all
* failed" return point. The allocation finish still needs the perag, and
* so the caller will release it once they've finished the allocation.
*
* When we wrap the AG iteration at the end of the filesystem, we have to be
* careful not to wrap into AGs below ones we already have locked in the
* transaction if we are doing a blocking iteration. This will result in an
* out-of-order locking of AGFs and hence can cause deadlocks.
*/
static int
xfs_alloc_vextent_iterate_ags(
struct xfs_alloc_arg *args,
xfs_agnumber_t minimum_agno,
xfs_agnumber_t start_agno,
xfs_agblock_t target_agbno,
uint32_t flags)
{
struct xfs_mount *mp = args->mp;
xfs: walk all AGs if TRYLOCK passed to xfs_alloc_vextent_iterate_ags Callers of xfs_alloc_vextent_iterate_ags that pass in the TRYLOCK flag want us to perform a non-blocking scan of the AGs for free space. There are no ordering constraints for non-blocking AGF lock acquisition, so the scan can freely start over at AG 0 even when minimum_agno > 0. This manifests fairly reliably on xfs/294 on 6.3-rc2 with the parent pointer patchset applied and the realtime volume enabled. I observed the following sequence as part of an xfs_dir_createname call: 0. Fragment the free space, then allocate nearly all the free space in all AGs except AG 0. 1. Create a directory in AG 2 and let it grow for a while. 2. Try to allocate 2 blocks to expand the dirent part of a directory. The space will be allocated out of AG 0, but the allocation will not be contiguous. This (I think) activates the LOWMODE allocator. 3. The bmapi call decides to convert from extents to bmbt format and tries to allocate 1 block. This allocation request calls xfs_alloc_vextent_start_ag with the inode number, which starts the scan at AG 2. We ignore AG 0 (with all its free space) and instead scrape AG 2 and 3 for more space. We find one block, but this now kicks t_highest_agno to 3. 4. The createname call decides it needs to split the dabtree. It tries to allocate even more space with xfs_alloc_vextent_start_ag, but now we're constrained to AG 3, and we don't find the space. The createname returns ENOSPC and the filesystem shuts down. This change fixes the problem by making the trylock scan wrap around to AG 0 if it doesn't like the AGs that it finds. Since the current transaction itself holds AGF 0, the trylock of AGF 0 will succeed, and we take space from the AG that has plenty. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2023-03-16 08:30:33 +08:00
xfs_agnumber_t restart_agno = minimum_agno;
xfs_agnumber_t agno;
int error = 0;
xfs: fix low space alloc deadlock I've recently encountered an ABBA deadlock with g/476. The upcoming changes seem to make this much easier to hit, but the underlying problem is a pre-existing one. Essentially, if we select an AG for allocation, then lock the AGF and then fail to allocate for some reason (e.g. minimum length requirements cannot be satisfied), then we drop out of the allocation with the AGF still locked. The caller then modifies the allocation constraints - usually loosening them up - and tries again. This can result in trying to access AGFs that are lower than the AGF we already have locked from the failed attempt. e.g. the failed attempt skipped several AGs before failing, so we have locks an AG higher than the start AG. Retrying the allocation from the start AG then causes us to violate AGF lock ordering and this can lead to deadlocks. The deadlock exists even if allocation succeeds - we can do a followup allocations in the same transaction for BMBT blocks that aren't guaranteed to be in the same AG as the original, and can move into higher AGs. Hence we really need to move the tp->t_firstblock tracking down into xfs_alloc_vextent() where it can be set when we exit with a locked AG. xfs_alloc_vextent() can also check there if the requested allocation falls within the allow range of AGs set by tp->t_firstblock. If we can't allocate within the range set, we have to fail the allocation. If we are allowed to to non-blocking AGF locking, we can ignore the AG locking order limitations as we can use try-locks for the first iteration over requested AG range. This invalidates a set of post allocation asserts that check that the allocation is always above tp->t_firstblock if it is set. Because we can use try-locks to avoid the deadlock in some circumstances, having a pre-existing locked AGF doesn't always prevent allocation from lower order AGFs. Hence those ASSERTs need to be removed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2023-02-11 01:07:06 +08:00
xfs: walk all AGs if TRYLOCK passed to xfs_alloc_vextent_iterate_ags Callers of xfs_alloc_vextent_iterate_ags that pass in the TRYLOCK flag want us to perform a non-blocking scan of the AGs for free space. There are no ordering constraints for non-blocking AGF lock acquisition, so the scan can freely start over at AG 0 even when minimum_agno > 0. This manifests fairly reliably on xfs/294 on 6.3-rc2 with the parent pointer patchset applied and the realtime volume enabled. I observed the following sequence as part of an xfs_dir_createname call: 0. Fragment the free space, then allocate nearly all the free space in all AGs except AG 0. 1. Create a directory in AG 2 and let it grow for a while. 2. Try to allocate 2 blocks to expand the dirent part of a directory. The space will be allocated out of AG 0, but the allocation will not be contiguous. This (I think) activates the LOWMODE allocator. 3. The bmapi call decides to convert from extents to bmbt format and tries to allocate 1 block. This allocation request calls xfs_alloc_vextent_start_ag with the inode number, which starts the scan at AG 2. We ignore AG 0 (with all its free space) and instead scrape AG 2 and 3 for more space. We find one block, but this now kicks t_highest_agno to 3. 4. The createname call decides it needs to split the dabtree. It tries to allocate even more space with xfs_alloc_vextent_start_ag, but now we're constrained to AG 3, and we don't find the space. The createname returns ENOSPC and the filesystem shuts down. This change fixes the problem by making the trylock scan wrap around to AG 0 if it doesn't like the AGs that it finds. Since the current transaction itself holds AGF 0, the trylock of AGF 0 will succeed, and we take space from the AG that has plenty. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2023-03-16 08:30:33 +08:00
if (flags & XFS_ALLOC_FLAG_TRYLOCK)
restart_agno = 0;
restart:
xfs: walk all AGs if TRYLOCK passed to xfs_alloc_vextent_iterate_ags Callers of xfs_alloc_vextent_iterate_ags that pass in the TRYLOCK flag want us to perform a non-blocking scan of the AGs for free space. There are no ordering constraints for non-blocking AGF lock acquisition, so the scan can freely start over at AG 0 even when minimum_agno > 0. This manifests fairly reliably on xfs/294 on 6.3-rc2 with the parent pointer patchset applied and the realtime volume enabled. I observed the following sequence as part of an xfs_dir_createname call: 0. Fragment the free space, then allocate nearly all the free space in all AGs except AG 0. 1. Create a directory in AG 2 and let it grow for a while. 2. Try to allocate 2 blocks to expand the dirent part of a directory. The space will be allocated out of AG 0, but the allocation will not be contiguous. This (I think) activates the LOWMODE allocator. 3. The bmapi call decides to convert from extents to bmbt format and tries to allocate 1 block. This allocation request calls xfs_alloc_vextent_start_ag with the inode number, which starts the scan at AG 2. We ignore AG 0 (with all its free space) and instead scrape AG 2 and 3 for more space. We find one block, but this now kicks t_highest_agno to 3. 4. The createname call decides it needs to split the dabtree. It tries to allocate even more space with xfs_alloc_vextent_start_ag, but now we're constrained to AG 3, and we don't find the space. The createname returns ENOSPC and the filesystem shuts down. This change fixes the problem by making the trylock scan wrap around to AG 0 if it doesn't like the AGs that it finds. Since the current transaction itself holds AGF 0, the trylock of AGF 0 will succeed, and we take space from the AG that has plenty. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2023-03-16 08:30:33 +08:00
for_each_perag_wrap_range(mp, start_agno, restart_agno,
mp->m_sb.sb_agcount, agno, args->pag) {
args->agno = agno;
error = xfs_alloc_vextent_prepare_ag(args);
if (error)
break;
if (!args->agbp) {
trace_xfs_alloc_vextent_loopfailed(args);
continue;
}
/*
* Allocation is supposed to succeed now, so break out of the
* loop regardless of whether we succeed or not.
*/
if (args->agno == start_agno && target_agbno) {
args->agbno = target_agbno;
error = xfs_alloc_ag_vextent_near(args);
} else {
args->agbno = 0;
error = xfs_alloc_ag_vextent_size(args);
}
break;
}
if (error) {
xfs_perag_rele(args->pag);
args->pag = NULL;
return error;
}
if (args->agbp)
return 0;
/*
* We didn't find an AG we can alloation from. If we were given
* constraining flags by the caller, drop them and retry the allocation
* without any constraints being set.
*/
if (flags) {
flags = 0;
xfs: walk all AGs if TRYLOCK passed to xfs_alloc_vextent_iterate_ags Callers of xfs_alloc_vextent_iterate_ags that pass in the TRYLOCK flag want us to perform a non-blocking scan of the AGs for free space. There are no ordering constraints for non-blocking AGF lock acquisition, so the scan can freely start over at AG 0 even when minimum_agno > 0. This manifests fairly reliably on xfs/294 on 6.3-rc2 with the parent pointer patchset applied and the realtime volume enabled. I observed the following sequence as part of an xfs_dir_createname call: 0. Fragment the free space, then allocate nearly all the free space in all AGs except AG 0. 1. Create a directory in AG 2 and let it grow for a while. 2. Try to allocate 2 blocks to expand the dirent part of a directory. The space will be allocated out of AG 0, but the allocation will not be contiguous. This (I think) activates the LOWMODE allocator. 3. The bmapi call decides to convert from extents to bmbt format and tries to allocate 1 block. This allocation request calls xfs_alloc_vextent_start_ag with the inode number, which starts the scan at AG 2. We ignore AG 0 (with all its free space) and instead scrape AG 2 and 3 for more space. We find one block, but this now kicks t_highest_agno to 3. 4. The createname call decides it needs to split the dabtree. It tries to allocate even more space with xfs_alloc_vextent_start_ag, but now we're constrained to AG 3, and we don't find the space. The createname returns ENOSPC and the filesystem shuts down. This change fixes the problem by making the trylock scan wrap around to AG 0 if it doesn't like the AGs that it finds. Since the current transaction itself holds AGF 0, the trylock of AGF 0 will succeed, and we take space from the AG that has plenty. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2023-03-16 08:30:33 +08:00
restart_agno = minimum_agno;
goto restart;
}
ASSERT(args->pag == NULL);
trace_xfs_alloc_vextent_allfailed(args);
return 0;
}
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-15 07:14:59 +08:00
/*
* Iterate from the AGs from the start AG to the end of the filesystem, trying
* to allocate blocks. It starts with a near allocation attempt in the initial
* AG, then falls back to anywhere-in-ag after the first AG fails. It will wrap
* back to zero if allowed by previous allocations in this transaction,
* otherwise will wrap back to the start AG and run a second blocking pass to
* the end of the filesystem.
*/
int
xfs_alloc_vextent_start_ag(
struct xfs_alloc_arg *args,
xfs_fsblock_t target)
{
struct xfs_mount *mp = args->mp;
xfs_agnumber_t minimum_agno;
xfs_agnumber_t start_agno;
xfs_agnumber_t rotorstep = xfs_rotorstep;
bool bump_rotor = false;
int error;
xfs: fix low space alloc deadlock I've recently encountered an ABBA deadlock with g/476. The upcoming changes seem to make this much easier to hit, but the underlying problem is a pre-existing one. Essentially, if we select an AG for allocation, then lock the AGF and then fail to allocate for some reason (e.g. minimum length requirements cannot be satisfied), then we drop out of the allocation with the AGF still locked. The caller then modifies the allocation constraints - usually loosening them up - and tries again. This can result in trying to access AGFs that are lower than the AGF we already have locked from the failed attempt. e.g. the failed attempt skipped several AGs before failing, so we have locks an AG higher than the start AG. Retrying the allocation from the start AG then causes us to violate AGF lock ordering and this can lead to deadlocks. The deadlock exists even if allocation succeeds - we can do a followup allocations in the same transaction for BMBT blocks that aren't guaranteed to be in the same AG as the original, and can move into higher AGs. Hence we really need to move the tp->t_firstblock tracking down into xfs_alloc_vextent() where it can be set when we exit with a locked AG. xfs_alloc_vextent() can also check there if the requested allocation falls within the allow range of AGs set by tp->t_firstblock. If we can't allocate within the range set, we have to fail the allocation. If we are allowed to to non-blocking AGF locking, we can ignore the AG locking order limitations as we can use try-locks for the first iteration over requested AG range. This invalidates a set of post allocation asserts that check that the allocation is always above tp->t_firstblock if it is set. Because we can use try-locks to avoid the deadlock in some circumstances, having a pre-existing locked AGF doesn't always prevent allocation from lower order AGFs. Hence those ASSERTs need to be removed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2023-02-11 01:07:06 +08:00
ASSERT(args->pag == NULL);
args->agno = NULLAGNUMBER;
args->agbno = NULLAGBLOCK;
trace_xfs_alloc_vextent_start_ag(args);
error = xfs_alloc_vextent_check_args(args, target, &minimum_agno);
if (error) {
if (error == -ENOSPC)
return 0;
return error;
}
xfs: fix low space alloc deadlock I've recently encountered an ABBA deadlock with g/476. The upcoming changes seem to make this much easier to hit, but the underlying problem is a pre-existing one. Essentially, if we select an AG for allocation, then lock the AGF and then fail to allocate for some reason (e.g. minimum length requirements cannot be satisfied), then we drop out of the allocation with the AGF still locked. The caller then modifies the allocation constraints - usually loosening them up - and tries again. This can result in trying to access AGFs that are lower than the AGF we already have locked from the failed attempt. e.g. the failed attempt skipped several AGs before failing, so we have locks an AG higher than the start AG. Retrying the allocation from the start AG then causes us to violate AGF lock ordering and this can lead to deadlocks. The deadlock exists even if allocation succeeds - we can do a followup allocations in the same transaction for BMBT blocks that aren't guaranteed to be in the same AG as the original, and can move into higher AGs. Hence we really need to move the tp->t_firstblock tracking down into xfs_alloc_vextent() where it can be set when we exit with a locked AG. xfs_alloc_vextent() can also check there if the requested allocation falls within the allow range of AGs set by tp->t_firstblock. If we can't allocate within the range set, we have to fail the allocation. If we are allowed to to non-blocking AGF locking, we can ignore the AG locking order limitations as we can use try-locks for the first iteration over requested AG range. This invalidates a set of post allocation asserts that check that the allocation is always above tp->t_firstblock if it is set. Because we can use try-locks to avoid the deadlock in some circumstances, having a pre-existing locked AGF doesn't always prevent allocation from lower order AGFs. Hence those ASSERTs need to be removed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2023-02-11 01:07:06 +08:00
if ((args->datatype & XFS_ALLOC_INITIAL_USER_DATA) &&
xfs_is_inode32(mp)) {
target = XFS_AGB_TO_FSB(mp,
((mp->m_agfrotor / rotorstep) %
mp->m_sb.sb_agcount), 0);
bump_rotor = 1;
}
start_agno = max(minimum_agno, XFS_FSB_TO_AGNO(mp, target));
error = xfs_alloc_vextent_iterate_ags(args, minimum_agno, start_agno,
XFS_FSB_TO_AGBNO(mp, target), XFS_ALLOC_FLAG_TRYLOCK);
if (bump_rotor) {
if (args->agno == start_agno)
mp->m_agfrotor = (mp->m_agfrotor + 1) %
(mp->m_sb.sb_agcount * rotorstep);
else
mp->m_agfrotor = (args->agno * rotorstep + 1) %
(mp->m_sb.sb_agcount * rotorstep);
}
return xfs_alloc_vextent_finish(args, minimum_agno, error, true);
}
/*
* Iterate from the agno indicated via @target through to the end of the
* filesystem attempting blocking allocation. This does not wrap or try a second
* pass, so will not recurse into AGs lower than indicated by the target.
*/
int
xfs_alloc_vextent_first_ag(
struct xfs_alloc_arg *args,
xfs_fsblock_t target)
{
struct xfs_mount *mp = args->mp;
xfs_agnumber_t minimum_agno;
xfs_agnumber_t start_agno;
int error;
ASSERT(args->pag == NULL);
args->agno = NULLAGNUMBER;
args->agbno = NULLAGBLOCK;
trace_xfs_alloc_vextent_first_ag(args);
error = xfs_alloc_vextent_check_args(args, target, &minimum_agno);
if (error) {
if (error == -ENOSPC)
return 0;
return error;
}
xfs: fix low space alloc deadlock I've recently encountered an ABBA deadlock with g/476. The upcoming changes seem to make this much easier to hit, but the underlying problem is a pre-existing one. Essentially, if we select an AG for allocation, then lock the AGF and then fail to allocate for some reason (e.g. minimum length requirements cannot be satisfied), then we drop out of the allocation with the AGF still locked. The caller then modifies the allocation constraints - usually loosening them up - and tries again. This can result in trying to access AGFs that are lower than the AGF we already have locked from the failed attempt. e.g. the failed attempt skipped several AGs before failing, so we have locks an AG higher than the start AG. Retrying the allocation from the start AG then causes us to violate AGF lock ordering and this can lead to deadlocks. The deadlock exists even if allocation succeeds - we can do a followup allocations in the same transaction for BMBT blocks that aren't guaranteed to be in the same AG as the original, and can move into higher AGs. Hence we really need to move the tp->t_firstblock tracking down into xfs_alloc_vextent() where it can be set when we exit with a locked AG. xfs_alloc_vextent() can also check there if the requested allocation falls within the allow range of AGs set by tp->t_firstblock. If we can't allocate within the range set, we have to fail the allocation. If we are allowed to to non-blocking AGF locking, we can ignore the AG locking order limitations as we can use try-locks for the first iteration over requested AG range. This invalidates a set of post allocation asserts that check that the allocation is always above tp->t_firstblock if it is set. Because we can use try-locks to avoid the deadlock in some circumstances, having a pre-existing locked AGF doesn't always prevent allocation from lower order AGFs. Hence those ASSERTs need to be removed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2023-02-11 01:07:06 +08:00
start_agno = max(minimum_agno, XFS_FSB_TO_AGNO(mp, target));
error = xfs_alloc_vextent_iterate_ags(args, minimum_agno, start_agno,
XFS_FSB_TO_AGBNO(mp, target), 0);
return xfs_alloc_vextent_finish(args, minimum_agno, error, true);
}
/*
* Allocate at the exact block target or fail. Caller is expected to hold a
* perag reference in args->pag.
*/
int
xfs_alloc_vextent_exact_bno(
struct xfs_alloc_arg *args,
xfs_fsblock_t target)
{
struct xfs_mount *mp = args->mp;
xfs_agnumber_t minimum_agno;
int error;
ASSERT(args->pag != NULL);
ASSERT(args->pag->pag_agno == XFS_FSB_TO_AGNO(mp, target));
args->agno = XFS_FSB_TO_AGNO(mp, target);
args->agbno = XFS_FSB_TO_AGBNO(mp, target);
trace_xfs_alloc_vextent_exact_bno(args);
error = xfs_alloc_vextent_check_args(args, target, &minimum_agno);
if (error) {
if (error == -ENOSPC)
return 0;
return error;
}
error = xfs_alloc_vextent_prepare_ag(args);
if (!error && args->agbp)
error = xfs_alloc_ag_vextent_exact(args);
return xfs_alloc_vextent_finish(args, minimum_agno, error, false);
}
/*
* Allocate an extent as close to the target as possible. If there are not
* viable candidates in the AG, then fail the allocation.
*
* Caller may or may not have a per-ag reference in args->pag.
*/
int
xfs_alloc_vextent_near_bno(
struct xfs_alloc_arg *args,
xfs_fsblock_t target)
{
struct xfs_mount *mp = args->mp;
xfs_agnumber_t minimum_agno;
bool needs_perag = args->pag == NULL;
int error;
if (!needs_perag)
ASSERT(args->pag->pag_agno == XFS_FSB_TO_AGNO(mp, target));
args->agno = XFS_FSB_TO_AGNO(mp, target);
args->agbno = XFS_FSB_TO_AGBNO(mp, target);
trace_xfs_alloc_vextent_near_bno(args);
error = xfs_alloc_vextent_check_args(args, target, &minimum_agno);
if (error) {
if (error == -ENOSPC)
return 0;
return error;
}
if (needs_perag)
args->pag = xfs_perag_grab(mp, args->agno);
error = xfs_alloc_vextent_prepare_ag(args);
if (!error && args->agbp)
error = xfs_alloc_ag_vextent_near(args);
return xfs_alloc_vextent_finish(args, minimum_agno, error, needs_perag);
}
/* Ensure that the freelist is at full capacity. */
int
xfs_free_extent_fix_freelist(
struct xfs_trans *tp,
struct xfs_perag *pag,
struct xfs_buf **agbp)
{
struct xfs_alloc_arg args;
int error;
memset(&args, 0, sizeof(struct xfs_alloc_arg));
args.tp = tp;
args.mp = tp->t_mountp;
args.agno = pag->pag_agno;
args.pag = pag;
/*
* validate that the block number is legal - the enables us to detect
* and handle a silent filesystem corruption rather than crashing.
*/
if (args.agno >= args.mp->m_sb.sb_agcount)
return -EFSCORRUPTED;
error = xfs_alloc_fix_freelist(&args, XFS_ALLOC_FLAG_FREEING);
if (error)
return error;
*agbp = args.agbp;
return 0;
}
/*
* Free an extent.
* Just break up the extent address and hand off to xfs_free_ag_extent
* after fixing up the freelist.
*/
int
__xfs_free_extent(
struct xfs_trans *tp,
struct xfs_perag *pag,
xfs_agblock_t agbno,
xfs_extlen_t len,
const struct xfs_owner_info *oinfo,
enum xfs_ag_resv_type type,
bool skip_discard)
{
struct xfs_mount *mp = tp->t_mountp;
struct xfs_buf *agbp;
struct xfs_agf *agf;
int error;
unsigned int busy_flags = 0;
ASSERT(len != 0);
xfs: account only rmapbt-used blocks against rmapbt perag res The rmapbt perag metadata reservation reserves blocks for the reverse mapping btree (rmapbt). Since the rmapbt uses blocks from the agfl and perag accounting is updated as blocks are allocated from the allocation btrees, the reservation actually accounts blocks as they are allocated to (or freed from) the agfl rather than the rmapbt itself. While this works for blocks that are eventually used for the rmapbt, not all agfl blocks are destined for the rmapbt. Blocks that are allocated to the agfl (and thus "reserved" for the rmapbt) but then used by another structure leads to a growing inconsistency over time between the runtime tracking of rmapbt usage vs. actual rmapbt usage. Since the runtime tracking thinks all agfl blocks are rmapbt blocks, it essentially believes that less future reservation is required to satisfy the rmapbt than what is actually necessary. The inconsistency is rectified across mount cycles because the perag reservation is initialized based on the actual rmapbt usage at mount time. The problem, however, is that the excessive drain of the reservation at runtime opens a window to allocate blocks for other purposes that might be required for the rmapbt on a subsequent mount. This problem can be demonstrated by a simple test that runs an allocation workload to consume agfl blocks over time and then observe the difference in the agfl reservation requirement across an unmount/mount cycle: mount ...: xfs_ag_resv_init: ... resv 3193 ask 3194 len 3194 ... ... : xfs_ag_resv_alloc_extent: ... resv 2957 ask 3194 len 1 umount...: xfs_ag_resv_free: ... resv 2956 ask 3194 len 0 mount ...: xfs_ag_resv_init: ... resv 3052 ask 3194 len 3194 As the above tracepoints show, the reservation requirement reduces from 3194 blocks to 2956 blocks as the workload runs. Without any other changes in the filesystem, the same reservation requirement jumps from 2956 to 3052 blocks over a umount/mount cycle. To address this divergence, update the RMAPBT reservation to account blocks used for the rmapbt only rather than all blocks filled into the agfl. This patch makes several high-level changes toward that end: 1.) Reintroduce an AGFL reservation type to serve as an accounting no-op for blocks allocated to (or freed from) the AGFL. 2.) Invoke RMAPBT usage accounting from the actual rmapbt block allocation path rather than the AGFL allocation path. The first change is required because agfl blocks are considered free blocks throughout their lifetime. The perag reservation subsystem is invoked unconditionally by the allocation subsystem, so we need a way to tell the perag subsystem (via the allocation subsystem) to not make any accounting changes for blocks filled into the AGFL. The second change causes the in-core RMAPBT reservation usage accounting to remain consistent with the on-disk state at all times and eliminates the risk of leaving the rmapbt reservation underfilled. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-10 06:02:32 +08:00
ASSERT(type != XFS_AG_RESV_AGFL);
if (XFS_TEST_ERROR(false, mp,
XFS_ERRTAG_FREE_EXTENT))
return -EIO;
error = xfs_free_extent_fix_freelist(tp, pag, &agbp);
if (error)
return error;
agf = agbp->b_addr;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
if (XFS_IS_CORRUPT(mp, agbno >= mp->m_sb.sb_agblocks)) {
error = -EFSCORRUPTED;
goto err_release;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
}
/* validate the extent size is legal now we have the agf locked */
if (XFS_IS_CORRUPT(mp, agbno + len > be32_to_cpu(agf->agf_length))) {
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
error = -EFSCORRUPTED;
goto err_release;
xfs: kill the XFS_WANT_CORRUPT_* macros The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:52:18 +08:00
}
error = xfs_free_ag_extent(tp, agbp, pag->pag_agno, agbno, len, oinfo,
type);
if (error)
goto err_release;
if (skip_discard)
busy_flags |= XFS_EXTENT_BUSY_SKIP_DISCARD;
xfs_extent_busy_insert(tp, pag, agbno, len, busy_flags);
return 0;
err_release:
xfs_trans_brelse(tp, agbp);
return error;
}
struct xfs_alloc_query_range_info {
xfs_alloc_query_range_fn fn;
void *priv;
};
/* Format btree record and pass to our callback. */
STATIC int
xfs_alloc_query_range_helper(
struct xfs_btree_cur *cur,
const union xfs_btree_rec *rec,
void *priv)
{
struct xfs_alloc_query_range_info *query = priv;
struct xfs_alloc_rec_incore irec;
xfs_failaddr_t fa;
xfs_alloc_btrec_to_irec(rec, &irec);
fa = xfs_alloc_check_irec(cur, &irec);
if (fa)
return xfs_alloc_complain_bad_rec(cur, fa, &irec);
return query->fn(cur, &irec, query->priv);
}
/* Find all free space within a given range of blocks. */
int
xfs_alloc_query_range(
struct xfs_btree_cur *cur,
const struct xfs_alloc_rec_incore *low_rec,
const struct xfs_alloc_rec_incore *high_rec,
xfs_alloc_query_range_fn fn,
void *priv)
{
union xfs_btree_irec low_brec;
union xfs_btree_irec high_brec;
struct xfs_alloc_query_range_info query;
ASSERT(cur->bc_btnum == XFS_BTNUM_BNO);
low_brec.a = *low_rec;
high_brec.a = *high_rec;
query.priv = priv;
query.fn = fn;
return xfs_btree_query_range(cur, &low_brec, &high_brec,
xfs_alloc_query_range_helper, &query);
}
/* Find all free space records. */
int
xfs_alloc_query_all(
struct xfs_btree_cur *cur,
xfs_alloc_query_range_fn fn,
void *priv)
{
struct xfs_alloc_query_range_info query;
ASSERT(cur->bc_btnum == XFS_BTNUM_BNO);
query.priv = priv;
query.fn = fn;
return xfs_btree_query_all(cur, xfs_alloc_query_range_helper, &query);
}
/* Is there a record covering a given extent? */
int
xfs_alloc_has_record(
struct xfs_btree_cur *cur,
xfs_agblock_t bno,
xfs_extlen_t len,
bool *exists)
{
union xfs_btree_irec low;
union xfs_btree_irec high;
memset(&low, 0, sizeof(low));
low.a.ar_startblock = bno;
memset(&high, 0xFF, sizeof(high));
high.a.ar_startblock = bno + len - 1;
return xfs_btree_has_record(cur, &low, &high, exists);
}
/*
* Walk all the blocks in the AGFL. The @walk_fn can return any negative
* error code or XFS_ITER_*.
*/
int
xfs_agfl_walk(
struct xfs_mount *mp,
struct xfs_agf *agf,
struct xfs_buf *agflbp,
xfs_agfl_walk_fn walk_fn,
void *priv)
{
__be32 *agfl_bno;
unsigned int i;
int error;
agfl_bno = xfs_buf_to_agfl_bno(agflbp);
i = be32_to_cpu(agf->agf_flfirst);
/* Nothing to walk in an empty AGFL. */
if (agf->agf_flcount == cpu_to_be32(0))
return 0;
/* Otherwise, walk from first to last, wrapping as needed. */
for (;;) {
error = walk_fn(mp, be32_to_cpu(agfl_bno[i]), priv);
if (error)
return error;
if (i == be32_to_cpu(agf->agf_fllast))
break;
if (++i == xfs_agfl_size(mp))
i = 0;
}
return 0;
}
int __init
xfs_extfree_intent_init_cache(void)
{
xfs_extfree_item_cache = kmem_cache_create("xfs_extfree_intent",
sizeof(struct xfs_extent_free_item),
0, 0, NULL);
return xfs_extfree_item_cache != NULL ? 0 : -ENOMEM;
}
void
xfs_extfree_intent_destroy_cache(void)
{
kmem_cache_destroy(xfs_extfree_item_cache);
xfs_extfree_item_cache = NULL;
}