OpenCloudOS-Kernel/drivers/s390/block/dasd_int.h

1277 lines
38 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
* Horst Hummel <Horst.Hummel@de.ibm.com>
* Martin Schwidefsky <schwidefsky@de.ibm.com>
* Bugreports.to..: <Linux390@de.ibm.com>
* Copyright IBM Corp. 1999, 2009
*/
#ifndef DASD_INT_H
#define DASD_INT_H
/* we keep old device allocation scheme; IOW, minors are still in 0..255 */
#define DASD_PER_MAJOR (1U << (MINORBITS - DASD_PARTN_BITS))
#define DASD_PARTN_MASK ((1 << DASD_PARTN_BITS) - 1)
/*
* States a dasd device can have:
* new: the dasd_device structure is allocated.
* known: the discipline for the device is identified.
* basic: the device can do basic i/o.
* unfmt: the device could not be analyzed (format is unknown).
* ready: partition detection is done and the device is can do block io.
* online: the device accepts requests from the block device queue.
*
* Things to do for startup state transitions:
* new -> known: find discipline for the device and create devfs entries.
* known -> basic: request irq line for the device.
* basic -> ready: do the initial analysis, e.g. format detection,
* do block device setup and detect partitions.
* ready -> online: schedule the device tasklet.
* Things to do for shutdown state transitions:
* online -> ready: just set the new device state.
* ready -> basic: flush requests from the block device layer, clear
* partition information and reset format information.
* basic -> known: terminate all requests and free irq.
* known -> new: remove devfs entries and forget discipline.
*/
#define DASD_STATE_NEW 0
#define DASD_STATE_KNOWN 1
#define DASD_STATE_BASIC 2
#define DASD_STATE_UNFMT 3
#define DASD_STATE_READY 4
#define DASD_STATE_ONLINE 5
#include <linux/module.h>
#include <linux/wait.h>
#include <linux/blkdev.h>
#include <linux/genhd.h>
#include <linux/hdreg.h>
#include <linux/interrupt.h>
#include <linux/log2.h>
#include <asm/ccwdev.h>
#include <linux/workqueue.h>
#include <asm/debug.h>
#include <asm/dasd.h>
#include <asm/idals.h>
#include <linux/bitops.h>
#include <linux/blk-mq.h>
/* DASD discipline magic */
#define DASD_ECKD_MAGIC 0xC5C3D2C4
#define DASD_DIAG_MAGIC 0xC4C9C1C7
#define DASD_FBA_MAGIC 0xC6C2C140
/*
* SECTION: Type definitions
*/
struct dasd_device;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
struct dasd_block;
/* BIT DEFINITIONS FOR SENSE DATA */
#define DASD_SENSE_BIT_0 0x80
#define DASD_SENSE_BIT_1 0x40
#define DASD_SENSE_BIT_2 0x20
#define DASD_SENSE_BIT_3 0x10
/* BIT DEFINITIONS FOR SIM SENSE */
#define DASD_SIM_SENSE 0x0F
#define DASD_SIM_MSG_TO_OP 0x03
#define DASD_SIM_LOG 0x0C
/* lock class for nested cdev lock */
#define CDEV_NESTED_FIRST 1
#define CDEV_NESTED_SECOND 2
/*
* SECTION: MACROs for klogd and s390 debug feature (dbf)
*/
#define DBF_DEV_EVENT(d_level, d_device, d_str, d_data...) \
do { \
debug_sprintf_event(d_device->debug_area, \
d_level, \
d_str "\n", \
d_data); \
} while(0)
#define DBF_EVENT(d_level, d_str, d_data...)\
do { \
debug_sprintf_event(dasd_debug_area, \
d_level,\
d_str "\n", \
d_data); \
} while(0)
#define DBF_EVENT_DEVID(d_level, d_cdev, d_str, d_data...) \
do { \
struct ccw_dev_id __dev_id; \
ccw_device_get_id(d_cdev, &__dev_id); \
debug_sprintf_event(dasd_debug_area, \
d_level, \
"0.%x.%04x " d_str "\n", \
__dev_id.ssid, __dev_id.devno, d_data); \
} while (0)
/* limit size for an errorstring */
#define ERRORLENGTH 30
/* definition of dbf debug levels */
#define DBF_EMERG 0 /* system is unusable */
#define DBF_ALERT 1 /* action must be taken immediately */
#define DBF_CRIT 2 /* critical conditions */
#define DBF_ERR 3 /* error conditions */
#define DBF_WARNING 4 /* warning conditions */
#define DBF_NOTICE 5 /* normal but significant condition */
#define DBF_INFO 6 /* informational */
#define DBF_DEBUG 6 /* debug-level messages */
/* messages to be written via klogd and dbf */
#define DEV_MESSAGE(d_loglevel,d_device,d_string,d_args...)\
do { \
printk(d_loglevel PRINTK_HEADER " %s: " d_string "\n", \
dev_name(&d_device->cdev->dev), d_args); \
DBF_DEV_EVENT(DBF_ALERT, d_device, d_string, d_args); \
} while(0)
#define MESSAGE(d_loglevel,d_string,d_args...)\
do { \
printk(d_loglevel PRINTK_HEADER " " d_string "\n", d_args); \
DBF_EVENT(DBF_ALERT, d_string, d_args); \
} while(0)
/* messages to be written via klogd only */
#define DEV_MESSAGE_LOG(d_loglevel,d_device,d_string,d_args...)\
do { \
printk(d_loglevel PRINTK_HEADER " %s: " d_string "\n", \
dev_name(&d_device->cdev->dev), d_args); \
} while(0)
#define MESSAGE_LOG(d_loglevel,d_string,d_args...)\
do { \
printk(d_loglevel PRINTK_HEADER " " d_string "\n", d_args); \
} while(0)
/* Macro to calculate number of blocks per page */
#define BLOCKS_PER_PAGE(blksize) (PAGE_SIZE / blksize)
struct dasd_ccw_req {
unsigned int magic; /* Eye catcher */
int intrc; /* internal error, e.g. from start_IO */
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
struct list_head devlist; /* for dasd_device request queue */
struct list_head blocklist; /* for dasd_block request queue */
struct dasd_block *block; /* the originating block device */
struct dasd_device *memdev; /* the device used to allocate this */
struct dasd_device *startdev; /* device the request is started on */
struct dasd_device *basedev; /* base device if no block->base */
void *cpaddr; /* address of ccw or tcw */
short retries; /* A retry counter */
unsigned char cpmode; /* 0 = cmd mode, 1 = itcw */
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
char status; /* status of this request */
char lpm; /* logical path mask */
unsigned long flags; /* flags of this request */
struct dasd_queue *dq;
unsigned long starttime; /* jiffies time of request start */
unsigned long expires; /* expiration period in jiffies */
void *data; /* pointer to data area */
struct irb irb; /* device status in case of an error */
struct dasd_ccw_req *refers; /* ERP-chain queueing. */
void *function; /* originating ERP action */
void *mem_chunk;
unsigned long buildclk; /* TOD-clock of request generation */
unsigned long startclk; /* TOD-clock of request start */
unsigned long stopclk; /* TOD-clock of request interrupt */
unsigned long endclk; /* TOD-clock of request termination */
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
void (*callback)(struct dasd_ccw_req *, void *data);
void *callback_data;
};
/*
* dasd_ccw_req -> status can be:
*/
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
#define DASD_CQR_FILLED 0x00 /* request is ready to be processed */
#define DASD_CQR_DONE 0x01 /* request is completed successfully */
#define DASD_CQR_NEED_ERP 0x02 /* request needs recovery action */
#define DASD_CQR_IN_ERP 0x03 /* request is in recovery */
#define DASD_CQR_FAILED 0x04 /* request is finally failed */
#define DASD_CQR_TERMINATED 0x05 /* request was stopped by driver */
#define DASD_CQR_QUEUED 0x80 /* request is queued to be processed */
#define DASD_CQR_IN_IO 0x81 /* request is currently in IO */
#define DASD_CQR_ERROR 0x82 /* request is completed with error */
#define DASD_CQR_CLEAR_PENDING 0x83 /* request is clear pending */
#define DASD_CQR_CLEARED 0x84 /* request was cleared */
#define DASD_CQR_SUCCESS 0x85 /* request was successful */
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
/* default expiration time*/
#define DASD_EXPIRES 300
#define DASD_EXPIRES_MAX 40000000
#define DASD_RETRIES 256
#define DASD_RETRIES_MAX 32768
/* per dasd_ccw_req flags */
#define DASD_CQR_FLAGS_USE_ERP 0 /* use ERP for this request */
#define DASD_CQR_FLAGS_FAILFAST 1 /* FAILFAST */
#define DASD_CQR_VERIFY_PATH 2 /* path verification request */
#define DASD_CQR_ALLOW_SLOCK 3 /* Try this request even when lock was
* stolen. Should not be combined with
* DASD_CQR_FLAGS_USE_ERP
*/
/*
* The following flags are used to suppress output of certain errors.
*/
#define DASD_CQR_SUPPRESS_NRF 4 /* Suppress 'No Record Found' error */
#define DASD_CQR_SUPPRESS_FP 5 /* Suppress 'File Protected' error*/
#define DASD_CQR_SUPPRESS_IL 6 /* Suppress 'Incorrect Length' error */
#define DASD_CQR_SUPPRESS_CR 7 /* Suppress 'Command Reject' error */
#define DASD_REQ_PER_DEV 4
/* Signature for error recovery functions. */
typedef struct dasd_ccw_req *(*dasd_erp_fn_t) (struct dasd_ccw_req *);
/*
* A single CQR can only contain a maximum of 255 CCWs. It is limited by
* the locate record and locate record extended count value which can only hold
* 1 Byte max.
*/
#define DASD_CQR_MAX_CCW 255
/*
* Unique identifier for dasd device.
*/
#define UA_NOT_CONFIGURED 0x00
#define UA_BASE_DEVICE 0x01
#define UA_BASE_PAV_ALIAS 0x02
#define UA_HYPER_PAV_ALIAS 0x03
struct dasd_uid {
__u8 type;
char vendor[4];
char serial[15];
__u16 ssid;
__u8 real_unit_addr;
__u8 base_unit_addr;
char vduit[33];
};
/*
* the struct dasd_discipline is
* sth like a table of virtual functions, if you think of dasd_eckd
* inheriting dasd...
* no, currently we are not planning to reimplement the driver in C++
*/
struct dasd_discipline {
struct module *owner;
char ebcname[8]; /* a name used for tagging and printks */
char name[8]; /* a name used for tagging and printks */
int max_blocks; /* maximum number of blocks to be chained */
struct list_head list; /* used for list of disciplines */
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
/*
* Device recognition functions. check_device is used to verify
* the sense data and the information returned by read device
* characteristics. It returns 0 if the discipline can be used
* for the device in question. uncheck_device is called during
* device shutdown to deregister a device from its discipline.
*/
int (*check_device) (struct dasd_device *);
void (*uncheck_device) (struct dasd_device *);
/*
* do_analysis is used in the step from device state "basic" to
* state "accept". It returns 0 if the device can be made ready,
* it returns -EMEDIUMTYPE if the device can't be made ready or
* -EAGAIN if do_analysis started a ccw that needs to complete
* before the analysis may be repeated.
*/
int (*do_analysis) (struct dasd_block *);
/*
* This function is called, when new paths become available.
* Disciplins may use this callback to do necessary setup work,
* e.g. verify that new path is compatible with the current
* configuration.
*/
int (*verify_path)(struct dasd_device *, __u8);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
/*
* Last things to do when a device is set online, and first things
* when it is set offline.
*/
int (*basic_to_ready) (struct dasd_device *);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
int (*online_to_ready) (struct dasd_device *);
int (*basic_to_known)(struct dasd_device *);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
/* (struct dasd_device *);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
* Device operation functions. build_cp creates a ccw chain for
* a block device request, start_io starts the request and
* term_IO cancels it (e.g. in case of a timeout). format_device
* formats the device and check_device_format compares the format of
* a device with the expected format_data.
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
* handle_terminated_request allows to examine a cqr and prepare
* it for retry.
*/
struct dasd_ccw_req *(*build_cp) (struct dasd_device *,
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
struct dasd_block *,
struct request *);
int (*start_IO) (struct dasd_ccw_req *);
int (*term_IO) (struct dasd_ccw_req *);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
void (*handle_terminated_request) (struct dasd_ccw_req *);
int (*format_device) (struct dasd_device *,
struct format_data_t *, int);
int (*check_device_format)(struct dasd_device *,
struct format_check_t *, int);
int (*free_cp) (struct dasd_ccw_req *, struct request *);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
/*
* Error recovery functions. examine_error() returns a value that
* indicates what to do for an error condition. If examine_error()
* returns 'dasd_era_recover' erp_action() is called to create a
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
* special error recovery ccw. erp_postaction() is called after
* an error recovery ccw has finished its execution. dump_sense
* is called for every error condition to print the sense data
* to the console.
*/
dasd_erp_fn_t(*erp_action) (struct dasd_ccw_req *);
dasd_erp_fn_t(*erp_postaction) (struct dasd_ccw_req *);
void (*dump_sense) (struct dasd_device *, struct dasd_ccw_req *,
struct irb *);
void (*dump_sense_dbf) (struct dasd_device *, struct irb *, char *);
void (*check_for_device_change) (struct dasd_device *,
struct dasd_ccw_req *,
struct irb *);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
/* i/o control functions. */
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
int (*fill_geometry) (struct dasd_block *, struct hd_geometry *);
int (*fill_info) (struct dasd_device *, struct dasd_information2_t *);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
int (*ioctl) (struct dasd_block *, unsigned int, void __user *);
/* suspend/resume functions */
int (*freeze) (struct dasd_device *);
int (*restore) (struct dasd_device *);
/* reload device after state change */
int (*reload) (struct dasd_device *);
int (*get_uid) (struct dasd_device *, struct dasd_uid *);
void (*kick_validate) (struct dasd_device *);
int (*check_attention)(struct dasd_device *, __u8);
int (*host_access_count)(struct dasd_device *);
int (*hosts_print)(struct dasd_device *, struct seq_file *);
void (*handle_hpf_error)(struct dasd_device *, struct irb *);
void (*disable_hpf)(struct dasd_device *);
int (*hpf_enabled)(struct dasd_device *);
void (*reset_path)(struct dasd_device *, __u8);
/*
* Extent Space Efficient (ESE) relevant functions
*/
int (*is_ese)(struct dasd_device *);
/* Capacity */
int (*space_allocated)(struct dasd_device *);
int (*space_configured)(struct dasd_device *);
int (*logical_capacity)(struct dasd_device *);
/* Extent Pool */
int (*ext_pool_id)(struct dasd_device *);
int (*ext_size)(struct dasd_device *);
int (*ext_pool_cap_at_warnlevel)(struct dasd_device *);
int (*ext_pool_warn_thrshld)(struct dasd_device *);
int (*ext_pool_oos)(struct dasd_device *);
struct dasd_ccw_req *(*ese_format)(struct dasd_device *, struct dasd_ccw_req *);
void (*ese_read)(struct dasd_ccw_req *);
};
extern struct dasd_discipline *dasd_diag_discipline_pointer;
/*
* Notification numbers for extended error reporting notifications:
* The DASD_EER_DISABLE notification is sent before a dasd_device (and it's
* eer pointer) is freed. The error reporting module needs to do all necessary
* cleanup steps.
* The DASD_EER_TRIGGER notification sends the actual error reports (triggers).
*/
#define DASD_EER_DISABLE 0
#define DASD_EER_TRIGGER 1
/* Trigger IDs for extended error reporting DASD_EER_TRIGGER notification */
#define DASD_EER_FATALERROR 1
#define DASD_EER_NOPATH 2
#define DASD_EER_STATECHANGE 3
#define DASD_EER_PPRCSUSPEND 4
/* DASD path handling */
#define DASD_PATH_OPERATIONAL 1
#define DASD_PATH_TBV 2
#define DASD_PATH_PP 3
#define DASD_PATH_NPP 4
#define DASD_PATH_MISCABLED 5
#define DASD_PATH_NOHPF 6
#define DASD_PATH_CUIR 7
#define DASD_PATH_IFCC 8
#define DASD_THRHLD_MAX 4294967295U
#define DASD_INTERVAL_MAX 4294967295U
struct dasd_path {
unsigned long flags;
u8 cssid;
u8 ssid;
u8 chpid;
struct dasd_conf_data *conf_data;
atomic_t error_count;
unsigned long errorclk;
};
struct dasd_profile_info {
/* legacy part of profile data, as in dasd_profile_info_t */
unsigned int dasd_io_reqs; /* number of requests processed */
unsigned int dasd_io_sects; /* number of sectors processed */
unsigned int dasd_io_secs[32]; /* histogram of request's sizes */
unsigned int dasd_io_times[32]; /* histogram of requests's times */
unsigned int dasd_io_timps[32]; /* h. of requests's times per sector */
unsigned int dasd_io_time1[32]; /* hist. of time from build to start */
unsigned int dasd_io_time2[32]; /* hist. of time from start to irq */
unsigned int dasd_io_time2ps[32]; /* hist. of time from start to irq */
unsigned int dasd_io_time3[32]; /* hist. of time from irq to end */
unsigned int dasd_io_nr_req[32]; /* hist. of # of requests in chanq */
/* new data */
struct timespec64 starttod; /* time of start or last reset */
unsigned int dasd_io_alias; /* requests using an alias */
unsigned int dasd_io_tpm; /* requests using transport mode */
unsigned int dasd_read_reqs; /* total number of read requests */
unsigned int dasd_read_sects; /* total number read sectors */
unsigned int dasd_read_alias; /* read request using an alias */
unsigned int dasd_read_tpm; /* read requests in transport mode */
unsigned int dasd_read_secs[32]; /* histogram of request's sizes */
unsigned int dasd_read_times[32]; /* histogram of requests's times */
unsigned int dasd_read_time1[32]; /* hist. time from build to start */
unsigned int dasd_read_time2[32]; /* hist. of time from start to irq */
unsigned int dasd_read_time3[32]; /* hist. of time from irq to end */
unsigned int dasd_read_nr_req[32]; /* hist. of # of requests in chanq */
unsigned long dasd_sum_times; /* sum of request times */
unsigned long dasd_sum_time_str; /* sum of time from build to start */
unsigned long dasd_sum_time_irq; /* sum of time from start to irq */
unsigned long dasd_sum_time_end; /* sum of time from irq to end */
};
struct dasd_profile {
struct dentry *dentry;
struct dasd_profile_info *data;
spinlock_t lock;
};
struct dasd_device {
/* Block device stuff. */
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
struct dasd_block *block;
unsigned int devindex;
unsigned long flags; /* per device flags */
unsigned short features; /* copy of devmap-features (read-only!) */
/* extended error reporting stuff (eer) */
struct dasd_ccw_req *eer_cqr;
/* Device discipline stuff. */
struct dasd_discipline *discipline;
struct dasd_discipline *base_discipline;
void *private;
struct dasd_path path[8];
__u8 opm;
/* Device state and target state. */
int state, target;
struct mutex state_mutex;
int stopped; /* device (ccw_device_start) was stopped */
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
/* reference count. */
atomic_t ref_count;
/* ccw queue and memory for static ccw/erp buffers. */
struct list_head ccw_queue;
spinlock_t mem_lock;
void *ccw_mem;
void *erp_mem;
void *ese_mem;
struct list_head ccw_chunks;
struct list_head erp_chunks;
struct list_head ese_chunks;
atomic_t tasklet_scheduled;
struct tasklet_struct tasklet;
struct work_struct kick_work;
struct work_struct restore_device;
struct work_struct reload_device;
struct work_struct kick_validate;
struct work_struct suc_work;
struct work_struct requeue_requests;
struct timer_list timer;
debug_info_t *debug_area;
struct ccw_device *cdev;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
/* hook for alias management */
struct list_head alias_list;
/* default expiration time in s */
unsigned long default_expires;
unsigned long default_retries;
unsigned long blk_timeout;
unsigned long path_thrhld;
unsigned long path_interval;
struct dentry *debugfs_dentry;
struct dentry *hosts_dentry;
struct dasd_profile profile;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
};
struct dasd_block {
/* Block device stuff. */
struct gendisk *gdp;
struct request_queue *request_queue;
spinlock_t request_queue_lock;
struct blk_mq_tag_set tag_set;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
struct block_device *bdev;
atomic_t open_count;
unsigned long blocks; /* size of volume in blocks */
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
unsigned int bp_block; /* bytes per block */
unsigned int s2b_shift; /* log2 (bp_block/512) */
struct dasd_device *base;
struct list_head ccw_queue;
spinlock_t queue_lock;
atomic_t tasklet_scheduled;
struct tasklet_struct tasklet;
struct timer_list timer;
struct dentry *debugfs_dentry;
struct dasd_profile profile;
};
struct dasd_attention_data {
struct dasd_device *device;
__u8 lpum;
};
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
struct dasd_queue {
spinlock_t lock;
};
/* reasons why device (ccw_device_start) was stopped */
#define DASD_STOPPED_NOT_ACC 1 /* not accessible */
#define DASD_STOPPED_QUIESCE 2 /* Quiesced */
#define DASD_STOPPED_PENDING 4 /* long busy */
#define DASD_STOPPED_DC_WAIT 8 /* disconnected, wait */
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
#define DASD_STOPPED_SU 16 /* summary unit check handling */
#define DASD_STOPPED_PM 32 /* pm state transition */
#define DASD_UNRESUMED_PM 64 /* pm resume failed state */
/* per device flags */
#define DASD_FLAG_OFFLINE 3 /* device is in offline processing */
#define DASD_FLAG_EER_SNSS 4 /* A SNSS is required */
#define DASD_FLAG_EER_IN_USE 5 /* A SNSS request is running */
#define DASD_FLAG_DEVICE_RO 6 /* The device itself is read-only. Don't
* confuse this with the user specified
* read-only feature.
*/
#define DASD_FLAG_IS_RESERVED 7 /* The device is reserved */
#define DASD_FLAG_LOCK_STOLEN 8 /* The device lock was stolen */
#define DASD_FLAG_SUSPENDED 9 /* The device was suspended */
#define DASD_FLAG_SAFE_OFFLINE 10 /* safe offline processing requested*/
#define DASD_FLAG_SAFE_OFFLINE_RUNNING 11 /* safe offline running */
#define DASD_FLAG_ABORTALL 12 /* Abort all noretry requests */
#define DASD_FLAG_PATH_VERIFY 13 /* Path verification worker running */
#define DASD_FLAG_SUC 14 /* unhandled summary unit check */
#define DASD_SLEEPON_START_TAG ((void *) 1)
#define DASD_SLEEPON_END_TAG ((void *) 2)
void dasd_put_device_wake(struct dasd_device *);
/*
* Reference count inliners
*/
static inline void
dasd_get_device(struct dasd_device *device)
{
atomic_inc(&device->ref_count);
}
static inline void
dasd_put_device(struct dasd_device *device)
{
if (atomic_dec_return(&device->ref_count) == 0)
dasd_put_device_wake(device);
}
/*
* The static memory in ccw_mem and erp_mem is managed by a sorted
* list of free memory chunks.
*/
struct dasd_mchunk
{
struct list_head list;
unsigned long size;
} __attribute__ ((aligned(8)));
static inline void
dasd_init_chunklist(struct list_head *chunk_list, void *mem,
unsigned long size)
{
struct dasd_mchunk *chunk;
INIT_LIST_HEAD(chunk_list);
chunk = (struct dasd_mchunk *) mem;
chunk->size = size - sizeof(struct dasd_mchunk);
list_add(&chunk->list, chunk_list);
}
static inline void *
dasd_alloc_chunk(struct list_head *chunk_list, unsigned long size)
{
struct dasd_mchunk *chunk, *tmp;
size = (size + 7L) & -8L;
list_for_each_entry(chunk, chunk_list, list) {
if (chunk->size < size)
continue;
if (chunk->size > size + sizeof(struct dasd_mchunk)) {
char *endaddr = (char *) (chunk + 1) + chunk->size;
tmp = (struct dasd_mchunk *) (endaddr - size) - 1;
tmp->size = size;
chunk->size -= size + sizeof(struct dasd_mchunk);
chunk = tmp;
} else
list_del(&chunk->list);
return (void *) (chunk + 1);
}
return NULL;
}
static inline void
dasd_free_chunk(struct list_head *chunk_list, void *mem)
{
struct dasd_mchunk *chunk, *tmp;
struct list_head *p, *left;
chunk = (struct dasd_mchunk *)
((char *) mem - sizeof(struct dasd_mchunk));
/* Find out the left neighbour in chunk_list. */
left = chunk_list;
list_for_each(p, chunk_list) {
if (list_entry(p, struct dasd_mchunk, list) > chunk)
break;
left = p;
}
/* Try to merge with right neighbour = next element from left. */
if (left->next != chunk_list) {
tmp = list_entry(left->next, struct dasd_mchunk, list);
if ((char *) (chunk + 1) + chunk->size == (char *) tmp) {
list_del(&tmp->list);
chunk->size += tmp->size + sizeof(struct dasd_mchunk);
}
}
/* Try to merge with left neighbour. */
if (left != chunk_list) {
tmp = list_entry(left, struct dasd_mchunk, list);
if ((char *) (tmp + 1) + tmp->size == (char *) chunk) {
tmp->size += chunk->size + sizeof(struct dasd_mchunk);
return;
}
}
__list_add(&chunk->list, left, left->next);
}
/*
* Check if bsize is in { 512, 1024, 2048, 4096 }
*/
static inline int
dasd_check_blocksize(int bsize)
{
if (bsize < 512 || bsize > 4096 || !is_power_of_2(bsize))
return -EMEDIUMTYPE;
return 0;
}
/* externals in dasd.c */
#define DASD_PROFILE_OFF 0
#define DASD_PROFILE_ON 1
#define DASD_PROFILE_GLOBAL_ONLY 2
extern debug_info_t *dasd_debug_area;
extern struct dasd_profile dasd_global_profile;
extern unsigned int dasd_global_profile_level;
extern const struct block_device_operations dasd_device_operations;
extern struct kmem_cache *dasd_page_cache;
struct dasd_ccw_req *
dasd_smalloc_request(int, int, int, struct dasd_device *, struct dasd_ccw_req *);
struct dasd_ccw_req *dasd_fmalloc_request(int, int, int, struct dasd_device *);
void dasd_sfree_request(struct dasd_ccw_req *, struct dasd_device *);
void dasd_ffree_request(struct dasd_ccw_req *, struct dasd_device *);
void dasd_wakeup_cb(struct dasd_ccw_req *, void *);
struct dasd_device *dasd_alloc_device(void);
void dasd_free_device(struct dasd_device *);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
struct dasd_block *dasd_alloc_block(void);
void dasd_free_block(struct dasd_block *);
enum blk_eh_timer_return dasd_times_out(struct request *req, bool reserved);
void dasd_enable_device(struct dasd_device *);
void dasd_set_target_state(struct dasd_device *, int);
void dasd_kick_device(struct dasd_device *);
void dasd_restore_device(struct dasd_device *);
void dasd_reload_device(struct dasd_device *);
void dasd_schedule_requeue(struct dasd_device *);
void dasd_add_request_head(struct dasd_ccw_req *);
void dasd_add_request_tail(struct dasd_ccw_req *);
int dasd_start_IO(struct dasd_ccw_req *);
int dasd_term_IO(struct dasd_ccw_req *);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
void dasd_schedule_device_bh(struct dasd_device *);
void dasd_schedule_block_bh(struct dasd_block *);
int dasd_sleep_on(struct dasd_ccw_req *);
int dasd_sleep_on_queue(struct list_head *);
int dasd_sleep_on_immediatly(struct dasd_ccw_req *);
int dasd_sleep_on_queue_interruptible(struct list_head *);
int dasd_sleep_on_interruptible(struct dasd_ccw_req *);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
void dasd_device_set_timer(struct dasd_device *, int);
void dasd_device_clear_timer(struct dasd_device *);
void dasd_block_set_timer(struct dasd_block *, int);
void dasd_block_clear_timer(struct dasd_block *);
int dasd_cancel_req(struct dasd_ccw_req *);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
int dasd_flush_device_queue(struct dasd_device *);
int dasd_generic_probe (struct ccw_device *, struct dasd_discipline *);
void dasd_generic_free_discipline(struct dasd_device *);
void dasd_generic_remove (struct ccw_device *cdev);
int dasd_generic_set_online(struct ccw_device *, struct dasd_discipline *);
int dasd_generic_set_offline (struct ccw_device *cdev);
int dasd_generic_notify(struct ccw_device *, int);
int dasd_generic_last_path_gone(struct dasd_device *);
int dasd_generic_path_operational(struct dasd_device *);
void dasd_generic_shutdown(struct ccw_device *);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
void dasd_generic_handle_state_change(struct dasd_device *);
int dasd_generic_pm_freeze(struct ccw_device *);
int dasd_generic_restore_device(struct ccw_device *);
enum uc_todo dasd_generic_uc_handler(struct ccw_device *, struct irb *);
void dasd_generic_path_event(struct ccw_device *, int *);
int dasd_generic_verify_path(struct dasd_device *, __u8);
int dasd_generic_read_dev_chars(struct dasd_device *, int, void *, int);
char *dasd_get_sense(struct irb *);
void dasd_device_set_stop_bits(struct dasd_device *, int);
void dasd_device_remove_stop_bits(struct dasd_device *, int);
int dasd_device_is_ro(struct dasd_device *);
void dasd_profile_reset(struct dasd_profile *);
int dasd_profile_on(struct dasd_profile *);
void dasd_profile_off(struct dasd_profile *);
char *dasd_get_user_string(const char __user *, size_t);
/* externals in dasd_devmap.c */
extern int dasd_max_devindex;
extern int dasd_probeonly;
extern int dasd_autodetect;
extern int dasd_nopav;
extern int dasd_nofcx;
int dasd_devmap_init(void);
void dasd_devmap_exit(void);
struct dasd_device *dasd_create_device(struct ccw_device *);
void dasd_delete_device(struct dasd_device *);
int dasd_get_feature(struct ccw_device *, int);
int dasd_set_feature(struct ccw_device *, int, int);
int dasd_add_sysfs_files(struct ccw_device *);
void dasd_remove_sysfs_files(struct ccw_device *);
struct dasd_device *dasd_device_from_cdev(struct ccw_device *);
struct dasd_device *dasd_device_from_cdev_locked(struct ccw_device *);
struct dasd_device *dasd_device_from_devindex(int);
void dasd_add_link_to_gendisk(struct gendisk *, struct dasd_device *);
struct dasd_device *dasd_device_from_gendisk(struct gendisk *);
int dasd_parse(void) __init;
int dasd_busid_known(const char *);
/* externals in dasd_gendisk.c */
int dasd_gendisk_init(void);
void dasd_gendisk_exit(void);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
int dasd_gendisk_alloc(struct dasd_block *);
void dasd_gendisk_free(struct dasd_block *);
int dasd_scan_partitions(struct dasd_block *);
void dasd_destroy_partitions(struct dasd_block *);
/* externals in dasd_ioctl.c */
int dasd_ioctl(struct block_device *, fmode_t, unsigned int, unsigned long);
/* externals in dasd_proc.c */
int dasd_proc_init(void);
void dasd_proc_exit(void);
/* externals in dasd_erp.c */
struct dasd_ccw_req *dasd_default_erp_action(struct dasd_ccw_req *);
struct dasd_ccw_req *dasd_default_erp_postaction(struct dasd_ccw_req *);
struct dasd_ccw_req *dasd_alloc_erp_request(char *, int, int,
struct dasd_device *);
void dasd_free_erp_request(struct dasd_ccw_req *, struct dasd_device *);
void dasd_log_sense(struct dasd_ccw_req *, struct irb *);
void dasd_log_sense_dbf(struct dasd_ccw_req *cqr, struct irb *irb);
/* externals in dasd_3990_erp.c */
struct dasd_ccw_req *dasd_3990_erp_action(struct dasd_ccw_req *);
void dasd_3990_erp_handle_sim(struct dasd_device *, char *);
/* externals in dasd_eer.c */
#ifdef CONFIG_DASD_EER
int dasd_eer_init(void);
void dasd_eer_exit(void);
int dasd_eer_enable(struct dasd_device *);
void dasd_eer_disable(struct dasd_device *);
void dasd_eer_write(struct dasd_device *, struct dasd_ccw_req *cqr,
unsigned int id);
void dasd_eer_snss(struct dasd_device *);
static inline int dasd_eer_enabled(struct dasd_device *device)
{
return device->eer_cqr != NULL;
}
#else
#define dasd_eer_init() (0)
#define dasd_eer_exit() do { } while (0)
#define dasd_eer_enable(d) (0)
#define dasd_eer_disable(d) do { } while (0)
#define dasd_eer_write(d,c,i) do { } while (0)
#define dasd_eer_snss(d) do { } while (0)
#define dasd_eer_enabled(d) (0)
#endif /* CONFIG_DASD_ERR */
/* DASD path handling functions */
/*
* helper functions to modify bit masks for a given channel path for a device
*/
static inline int dasd_path_is_operational(struct dasd_device *device, int chp)
{
return test_bit(DASD_PATH_OPERATIONAL, &device->path[chp].flags);
}
static inline int dasd_path_need_verify(struct dasd_device *device, int chp)
{
return test_bit(DASD_PATH_TBV, &device->path[chp].flags);
}
static inline void dasd_path_verify(struct dasd_device *device, int chp)
{
__set_bit(DASD_PATH_TBV, &device->path[chp].flags);
}
static inline void dasd_path_clear_verify(struct dasd_device *device, int chp)
{
__clear_bit(DASD_PATH_TBV, &device->path[chp].flags);
}
static inline void dasd_path_clear_all_verify(struct dasd_device *device)
{
int chp;
for (chp = 0; chp < 8; chp++)
dasd_path_clear_verify(device, chp);
}
static inline void dasd_path_operational(struct dasd_device *device, int chp)
{
__set_bit(DASD_PATH_OPERATIONAL, &device->path[chp].flags);
device->opm |= (0x80 >> chp);
}
static inline void dasd_path_nonpreferred(struct dasd_device *device, int chp)
{
__set_bit(DASD_PATH_NPP, &device->path[chp].flags);
}
static inline int dasd_path_is_nonpreferred(struct dasd_device *device, int chp)
{
return test_bit(DASD_PATH_NPP, &device->path[chp].flags);
}
static inline void dasd_path_clear_nonpreferred(struct dasd_device *device,
int chp)
{
__clear_bit(DASD_PATH_NPP, &device->path[chp].flags);
}
static inline void dasd_path_preferred(struct dasd_device *device, int chp)
{
__set_bit(DASD_PATH_PP, &device->path[chp].flags);
}
static inline int dasd_path_is_preferred(struct dasd_device *device, int chp)
{
return test_bit(DASD_PATH_PP, &device->path[chp].flags);
}
static inline void dasd_path_clear_preferred(struct dasd_device *device,
int chp)
{
__clear_bit(DASD_PATH_PP, &device->path[chp].flags);
}
static inline void dasd_path_clear_oper(struct dasd_device *device, int chp)
{
__clear_bit(DASD_PATH_OPERATIONAL, &device->path[chp].flags);
device->opm &= ~(0x80 >> chp);
}
static inline void dasd_path_clear_cable(struct dasd_device *device, int chp)
{
__clear_bit(DASD_PATH_MISCABLED, &device->path[chp].flags);
}
static inline void dasd_path_cuir(struct dasd_device *device, int chp)
{
__set_bit(DASD_PATH_CUIR, &device->path[chp].flags);
}
static inline int dasd_path_is_cuir(struct dasd_device *device, int chp)
{
return test_bit(DASD_PATH_CUIR, &device->path[chp].flags);
}
static inline void dasd_path_clear_cuir(struct dasd_device *device, int chp)
{
__clear_bit(DASD_PATH_CUIR, &device->path[chp].flags);
}
static inline void dasd_path_ifcc(struct dasd_device *device, int chp)
{
set_bit(DASD_PATH_IFCC, &device->path[chp].flags);
}
static inline int dasd_path_is_ifcc(struct dasd_device *device, int chp)
{
return test_bit(DASD_PATH_IFCC, &device->path[chp].flags);
}
static inline void dasd_path_clear_ifcc(struct dasd_device *device, int chp)
{
clear_bit(DASD_PATH_IFCC, &device->path[chp].flags);
}
static inline void dasd_path_clear_nohpf(struct dasd_device *device, int chp)
{
__clear_bit(DASD_PATH_NOHPF, &device->path[chp].flags);
}
static inline void dasd_path_miscabled(struct dasd_device *device, int chp)
{
__set_bit(DASD_PATH_MISCABLED, &device->path[chp].flags);
}
static inline int dasd_path_is_miscabled(struct dasd_device *device, int chp)
{
return test_bit(DASD_PATH_MISCABLED, &device->path[chp].flags);
}
static inline void dasd_path_nohpf(struct dasd_device *device, int chp)
{
__set_bit(DASD_PATH_NOHPF, &device->path[chp].flags);
}
static inline int dasd_path_is_nohpf(struct dasd_device *device, int chp)
{
return test_bit(DASD_PATH_NOHPF, &device->path[chp].flags);
}
/*
* get functions for path masks
* will return a path masks for the given device
*/
static inline __u8 dasd_path_get_opm(struct dasd_device *device)
{
return device->opm;
}
static inline __u8 dasd_path_get_tbvpm(struct dasd_device *device)
{
int chp;
__u8 tbvpm = 0x00;
for (chp = 0; chp < 8; chp++)
if (dasd_path_need_verify(device, chp))
tbvpm |= 0x80 >> chp;
return tbvpm;
}
static inline __u8 dasd_path_get_nppm(struct dasd_device *device)
{
int chp;
__u8 npm = 0x00;
for (chp = 0; chp < 8; chp++) {
if (dasd_path_is_nonpreferred(device, chp))
npm |= 0x80 >> chp;
}
return npm;
}
static inline __u8 dasd_path_get_ppm(struct dasd_device *device)
{
int chp;
__u8 ppm = 0x00;
for (chp = 0; chp < 8; chp++)
if (dasd_path_is_preferred(device, chp))
ppm |= 0x80 >> chp;
return ppm;
}
static inline __u8 dasd_path_get_cablepm(struct dasd_device *device)
{
int chp;
__u8 cablepm = 0x00;
for (chp = 0; chp < 8; chp++)
if (dasd_path_is_miscabled(device, chp))
cablepm |= 0x80 >> chp;
return cablepm;
}
static inline __u8 dasd_path_get_cuirpm(struct dasd_device *device)
{
int chp;
__u8 cuirpm = 0x00;
for (chp = 0; chp < 8; chp++)
if (dasd_path_is_cuir(device, chp))
cuirpm |= 0x80 >> chp;
return cuirpm;
}
static inline __u8 dasd_path_get_ifccpm(struct dasd_device *device)
{
int chp;
__u8 ifccpm = 0x00;
for (chp = 0; chp < 8; chp++)
if (dasd_path_is_ifcc(device, chp))
ifccpm |= 0x80 >> chp;
return ifccpm;
}
static inline __u8 dasd_path_get_hpfpm(struct dasd_device *device)
{
int chp;
__u8 hpfpm = 0x00;
for (chp = 0; chp < 8; chp++)
if (dasd_path_is_nohpf(device, chp))
hpfpm |= 0x80 >> chp;
return hpfpm;
}
/*
* add functions for path masks
* the existing path mask will be extended by the given path mask
*/
static inline void dasd_path_add_tbvpm(struct dasd_device *device, __u8 pm)
{
int chp;
for (chp = 0; chp < 8; chp++)
if (pm & (0x80 >> chp))
dasd_path_verify(device, chp);
}
static inline __u8 dasd_path_get_notoperpm(struct dasd_device *device)
{
int chp;
__u8 nopm = 0x00;
for (chp = 0; chp < 8; chp++)
if (dasd_path_is_nohpf(device, chp) ||
dasd_path_is_ifcc(device, chp) ||
dasd_path_is_cuir(device, chp) ||
dasd_path_is_miscabled(device, chp))
nopm |= 0x80 >> chp;
return nopm;
}
static inline void dasd_path_add_opm(struct dasd_device *device, __u8 pm)
{
int chp;
for (chp = 0; chp < 8; chp++)
if (pm & (0x80 >> chp)) {
dasd_path_operational(device, chp);
/*
* if the path is used
* it should not be in one of the negative lists
*/
dasd_path_clear_nohpf(device, chp);
dasd_path_clear_cuir(device, chp);
dasd_path_clear_cable(device, chp);
dasd_path_clear_ifcc(device, chp);
}
}
static inline void dasd_path_add_cablepm(struct dasd_device *device, __u8 pm)
{
int chp;
for (chp = 0; chp < 8; chp++)
if (pm & (0x80 >> chp))
dasd_path_miscabled(device, chp);
}
static inline void dasd_path_add_cuirpm(struct dasd_device *device, __u8 pm)
{
int chp;
for (chp = 0; chp < 8; chp++)
if (pm & (0x80 >> chp))
dasd_path_cuir(device, chp);
}
static inline void dasd_path_add_ifccpm(struct dasd_device *device, __u8 pm)
{
int chp;
for (chp = 0; chp < 8; chp++)
if (pm & (0x80 >> chp))
dasd_path_ifcc(device, chp);
}
static inline void dasd_path_add_nppm(struct dasd_device *device, __u8 pm)
{
int chp;
for (chp = 0; chp < 8; chp++)
if (pm & (0x80 >> chp))
dasd_path_nonpreferred(device, chp);
}
static inline void dasd_path_add_nohpfpm(struct dasd_device *device, __u8 pm)
{
int chp;
for (chp = 0; chp < 8; chp++)
if (pm & (0x80 >> chp))
dasd_path_nohpf(device, chp);
}
static inline void dasd_path_add_ppm(struct dasd_device *device, __u8 pm)
{
int chp;
for (chp = 0; chp < 8; chp++)
if (pm & (0x80 >> chp))
dasd_path_preferred(device, chp);
}
/*
* set functions for path masks
* the existing path mask will be replaced by the given path mask
*/
static inline void dasd_path_set_tbvpm(struct dasd_device *device, __u8 pm)
{
int chp;
for (chp = 0; chp < 8; chp++)
if (pm & (0x80 >> chp))
dasd_path_verify(device, chp);
else
dasd_path_clear_verify(device, chp);
}
static inline void dasd_path_set_opm(struct dasd_device *device, __u8 pm)
{
int chp;
for (chp = 0; chp < 8; chp++) {
dasd_path_clear_oper(device, chp);
if (pm & (0x80 >> chp)) {
dasd_path_operational(device, chp);
/*
* if the path is used
* it should not be in one of the negative lists
*/
dasd_path_clear_nohpf(device, chp);
dasd_path_clear_cuir(device, chp);
dasd_path_clear_cable(device, chp);
dasd_path_clear_ifcc(device, chp);
}
}
}
/*
* remove functions for path masks
* the existing path mask will be cleared with the given path mask
*/
static inline void dasd_path_remove_opm(struct dasd_device *device, __u8 pm)
{
int chp;
for (chp = 0; chp < 8; chp++) {
if (pm & (0x80 >> chp))
dasd_path_clear_oper(device, chp);
}
}
/*
* add the newly available path to the to be verified pm and remove it from
* normal operation until it is verified
*/
static inline void dasd_path_available(struct dasd_device *device, int chp)
{
dasd_path_clear_oper(device, chp);
dasd_path_verify(device, chp);
}
static inline void dasd_path_notoper(struct dasd_device *device, int chp)
{
dasd_path_clear_oper(device, chp);
dasd_path_clear_preferred(device, chp);
dasd_path_clear_nonpreferred(device, chp);
}
/*
* remove all paths from normal operation
*/
static inline void dasd_path_no_path(struct dasd_device *device)
{
int chp;
for (chp = 0; chp < 8; chp++)
dasd_path_notoper(device, chp);
dasd_path_clear_all_verify(device);
}
/* end - path handling */
#endif /* DASD_H */