OpenCloudOS-Kernel/drivers/s390/scsi/zfcp_scsi.c

713 lines
20 KiB
C
Raw Normal View History

/*
* zfcp device driver
*
* Interface to Linux SCSI midlayer.
*
[SCSI] zfcp: block queue limits with data router Commit 86a9668a8d29ea711613e1cb37efa68e7c4db564 "[SCSI] zfcp: support for hardware data router" reduced the initial block queue limits in the scsi_host_template to the absolute minimum and adjusted them later on. However, the adjustment was too late for the BSG devices of Scsi_Host and fc_host. Therefore, ioctl(..., SG_IO, ...) with request or response size > 4kB to a BSG device of an fc_host or a Scsi_Host fails with EINVAL. As a result, users of such ioctl such as HBA_SendCTPassThru() in libzfcphbaapi return with error HBA_STATUS_ERROR. Initialize the block queue limits in zfcp_scsi_host_template to the greatest common denominator (GCD). While we cannot exploit the slightly enlarged maximum request size with data router, this should be neglectible. Doing so also avoids running into trouble after live guest relocation (LGR) / migration from a data router FCP device to an FCP device that does not support data router. In that case, zfcp would figure out the new limits on adapter recovery, but the fc_host and Scsi_Host (plus in fact all sdevs) still exist with the old and now too large queue limits. It should also OK, not to use half the size as in the DIX case, because fc_host and Scsi_Host do not transport FCP requests including SCSI commands using protection data. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> #3.2+ Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-26 23:33:45 +08:00
* Copyright IBM Corp. 2002, 2013
*/
#define KMSG_COMPONENT "zfcp"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/module.h>
#include <linux/types.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <scsi/fc/fc_fcp.h>
#include <scsi/scsi_eh.h>
#include <linux/atomic.h>
#include "zfcp_ext.h"
#include "zfcp_dbf.h"
#include "zfcp_fc.h"
#include "zfcp_reqlist.h"
static unsigned int default_depth = 32;
module_param_named(queue_depth, default_depth, uint, 0600);
MODULE_PARM_DESC(queue_depth, "Default queue depth for new SCSI devices");
static bool enable_dif;
module_param_named(dif, enable_dif, bool, 0400);
MODULE_PARM_DESC(dif, "Enable DIF/DIX data integrity support");
static bool allow_lun_scan = 1;
module_param(allow_lun_scan, bool, 0600);
MODULE_PARM_DESC(allow_lun_scan, "For NPIV, scan and attach all storage LUNs");
static void zfcp_scsi_slave_destroy(struct scsi_device *sdev)
{
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev);
/* if previous slave_alloc returned early, there is nothing to do */
if (!zfcp_sdev->port)
return;
zfcp_erp_lun_shutdown_wait(sdev, "scssd_1");
put_device(&zfcp_sdev->port->dev);
}
static int zfcp_scsi_slave_configure(struct scsi_device *sdp)
{
if (sdp->tagged_supported)
scsi_change_queue_depth(sdp, default_depth);
return 0;
}
static void zfcp_scsi_command_fail(struct scsi_cmnd *scpnt, int result)
{
set_host_byte(scpnt, result);
zfcp_dbf_scsi_fail_send(scpnt);
scpnt->scsi_done(scpnt);
}
[SCSI] zfcp: Issue FCP command without holding SCSI host_lock Interrupting the connection to the FCP channel while I/O requests are being issued can lead to this deadlock. scsi_dispatch_cmd already holds the host_lock while the recovery trigger tries to acquire the host_lock again when iterating through the scsi_devices. INFO: lockdep is turned off. BUG: spinlock lockup on CPU#1, blast/9660, 0000000078f38878 CPU: 1 Not tainted 2.6.35.7SWEN2 #2 Process blast (pid: 9660, task: 0000000071f75940, ksp: 0000000074393ac0) 0000000074393640 00000000743935c0 0000000000000002 0000000000000000 0000000074393660 00000000743935d8 00000000743935d8 00000000005590c2 0000000000000000 0000000078f38878 0000000026ede800 0000000078f38878 000000000000000d 040000000000000c 0000000074393628 0000000000000000 0000000000000000 0000000000100b2a 00000000743935c0 0000000074393600 Call Trace: ([<0000000000100a32>] show_trace+0xee/0x144) [<00000000003be202>] do_raw_spin_lock+0x112/0x178 [<000000000055d408>] _raw_spin_lock_irqsave+0x90/0xb0 [<00000000003f1514>] __scsi_iterate_devices+0x38/0xbc [<00000000004849b0>] zfcp_erp_clear_adapter_status+0xd0/0x16c [<000000000048587a>] zfcp_erp_adapter_reopen+0x3a/0xb4 [<0000000000489812>] zfcp_fsf_req_send+0x166/0x180 [<000000000048c8d6>] zfcp_fsf_fcp_cmnd+0x272/0x408 [<000000000048f864>] zfcp_scsi_queuecommand+0x11c/0x1e0 [<00000000003f1f2a>] scsi_dispatch_cmd+0x1d6/0x324 [<00000000003f9910>] scsi_request_fn+0x42c/0x56c [<00000000003828ae>] __blk_run_queue+0x86/0x140 [<000000000037f742>] elv_insert+0x11a/0x208 [<000000000038104c>] blk_insert_cloned_request+0x84/0xe4 [<000003c0032b7c64>] dm_dispatch_request+0x6c/0x94 [dm_mod] [<000003c0032b7d5c>] map_request+0xd0/0x100 [dm_mod] [<000003c0032b9a78>] dm_request_fn+0xec/0x1bc [dm_mod] [<0000000000382c0e>] generic_unplug_device+0x5a/0x6c [<000003c0032b7f98>] dm_unplug_all+0x74/0x9c [dm_mod] [<00000000001d1272>] sync_page+0x76/0x9c [<00000000001d12ba>] sync_page_killable+0x22/0x60 [<000000000055a768>] __wait_on_bit_lock+0xc0/0x124 [<00000000001d1140>] __lock_page_killable+0x78/0x84 [<00000000001d351c>] generic_file_aio_read+0x5a4/0x7e8 [<0000000000228ec0>] do_sync_read+0xc8/0x12c [<0000000000229edc>] vfs_read+0xac/0x1ac [<000000000022a0d8>] SyS_read+0x58/0xa8 [<00000000001146de>] sysc_noemu+0x10/0x16 [<00000200000493c4>] 0x200000493c4 INFO: lockdep is turned off. Call zfcp_fsf_fcp_cmnd without the host_lock and disable the interrupts when acquiring the req_q_lock. According to the patch description in "[PATCH] Eliminate error handler overload of the SCSI serial number", the serial_number is not used, so simply drop the queuecommand wrapper function and run zfcp_scsi_queuecommand without holding the host_lock. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-11-18 21:53:18 +08:00
static
int zfcp_scsi_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scpnt)
{
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(scpnt->device);
struct fc_rport *rport = starget_to_rport(scsi_target(scpnt->device));
int status, scsi_result, ret;
/* reset the status for this request */
scpnt->result = 0;
scpnt->host_scribble = NULL;
scsi_result = fc_remote_port_chkready(rport);
if (unlikely(scsi_result)) {
scpnt->result = scsi_result;
zfcp_dbf_scsi_fail_send(scpnt);
scpnt->scsi_done(scpnt);
return 0;
}
status = atomic_read(&zfcp_sdev->status);
if (unlikely(status & ZFCP_STATUS_COMMON_ERP_FAILED) &&
!(atomic_read(&zfcp_sdev->port->status) &
ZFCP_STATUS_COMMON_ERP_FAILED)) {
/* only LUN access denied, but port is good
* not covered by FC transport, have to fail here */
zfcp_scsi_command_fail(scpnt, DID_ERROR);
return 0;
}
if (unlikely(!(status & ZFCP_STATUS_COMMON_UNBLOCKED))) {
/* This could be either
* open LUN pending: this is temporary, will result in
* open LUN or ERP_FAILED, so retry command
* call to rport_delete pending: mimic retry from
* fc_remote_port_chkready until rport is BLOCKED
*/
zfcp_scsi_command_fail(scpnt, DID_IMM_RETRY);
return 0;
}
ret = zfcp_fsf_fcp_cmnd(scpnt);
if (unlikely(ret == -EBUSY))
return SCSI_MLQUEUE_DEVICE_BUSY;
else if (unlikely(ret < 0))
return SCSI_MLQUEUE_HOST_BUSY;
return ret;
}
static int zfcp_scsi_slave_alloc(struct scsi_device *sdev)
{
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
struct zfcp_adapter *adapter =
(struct zfcp_adapter *) sdev->host->hostdata[0];
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev);
struct zfcp_port *port;
struct zfcp_unit *unit;
int npiv = adapter->connection_features & FSF_FEATURE_NPIV_MODE;
port = zfcp_get_port_by_wwpn(adapter, rport->port_name);
if (!port)
return -ENXIO;
unit = zfcp_unit_find(port, zfcp_scsi_dev_lun(sdev));
if (unit)
put_device(&unit->dev);
if (!unit && !(allow_lun_scan && npiv)) {
put_device(&port->dev);
return -ENXIO;
}
zfcp_sdev->port = port;
zfcp_sdev->latencies.write.channel.min = 0xFFFFFFFF;
zfcp_sdev->latencies.write.fabric.min = 0xFFFFFFFF;
zfcp_sdev->latencies.read.channel.min = 0xFFFFFFFF;
zfcp_sdev->latencies.read.fabric.min = 0xFFFFFFFF;
zfcp_sdev->latencies.cmd.channel.min = 0xFFFFFFFF;
zfcp_sdev->latencies.cmd.fabric.min = 0xFFFFFFFF;
spin_lock_init(&zfcp_sdev->latencies.lock);
zfcp_erp_set_lun_status(sdev, ZFCP_STATUS_COMMON_RUNNING);
zfcp_erp_lun_reopen(sdev, 0, "scsla_1");
zfcp_erp_wait(port->adapter);
return 0;
}
static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt)
{
struct Scsi_Host *scsi_host = scpnt->device->host;
struct zfcp_adapter *adapter =
(struct zfcp_adapter *) scsi_host->hostdata[0];
struct zfcp_fsf_req *old_req, *abrt_req;
unsigned long flags;
unsigned long old_reqid = (unsigned long) scpnt->host_scribble;
int retval = SUCCESS, ret;
int retry = 3;
char *dbf_tag;
/* avoid race condition between late normal completion and abort */
write_lock_irqsave(&adapter->abort_lock, flags);
old_req = zfcp_reqlist_find(adapter->req_list, old_reqid);
if (!old_req) {
write_unlock_irqrestore(&adapter->abort_lock, flags);
zfcp_dbf_scsi_abort("abrt_or", scpnt, NULL);
return FAILED; /* completion could be in progress */
}
old_req->data = NULL;
/* don't access old fsf_req after releasing the abort_lock */
write_unlock_irqrestore(&adapter->abort_lock, flags);
while (retry--) {
abrt_req = zfcp_fsf_abort_fcp_cmnd(scpnt);
if (abrt_req)
break;
zfcp_erp_wait(adapter);
ret = fc_block_scsi_eh(scpnt);
if (ret) {
zfcp_dbf_scsi_abort("abrt_bl", scpnt, NULL);
return ret;
}
if (!(atomic_read(&adapter->status) &
ZFCP_STATUS_COMMON_RUNNING)) {
zfcp_dbf_scsi_abort("abrt_ru", scpnt, NULL);
return SUCCESS;
}
}
if (!abrt_req) {
zfcp_dbf_scsi_abort("abrt_ar", scpnt, NULL);
return FAILED;
}
wait_for_completion(&abrt_req->completion);
if (abrt_req->status & ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED)
dbf_tag = "abrt_ok";
else if (abrt_req->status & ZFCP_STATUS_FSFREQ_ABORTNOTNEEDED)
dbf_tag = "abrt_nn";
else {
dbf_tag = "abrt_fa";
retval = FAILED;
}
zfcp_dbf_scsi_abort(dbf_tag, scpnt, abrt_req);
zfcp_fsf_req_free(abrt_req);
return retval;
}
static int zfcp_task_mgmt_function(struct scsi_cmnd *scpnt, u8 tm_flags)
{
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(scpnt->device);
struct zfcp_adapter *adapter = zfcp_sdev->port->adapter;
struct zfcp_fsf_req *fsf_req = NULL;
int retval = SUCCESS, ret;
int retry = 3;
while (retry--) {
fsf_req = zfcp_fsf_fcp_task_mgmt(scpnt, tm_flags);
if (fsf_req)
break;
zfcp_erp_wait(adapter);
ret = fc_block_scsi_eh(scpnt);
if (ret)
return ret;
if (!(atomic_read(&adapter->status) &
ZFCP_STATUS_COMMON_RUNNING)) {
zfcp_dbf_scsi_devreset("nres", scpnt, tm_flags);
return SUCCESS;
}
}
if (!fsf_req)
return FAILED;
wait_for_completion(&fsf_req->completion);
if (fsf_req->status & ZFCP_STATUS_FSFREQ_TMFUNCFAILED) {
zfcp_dbf_scsi_devreset("fail", scpnt, tm_flags);
retval = FAILED;
} else
zfcp_dbf_scsi_devreset("okay", scpnt, tm_flags);
zfcp_fsf_req_free(fsf_req);
return retval;
}
static int zfcp_scsi_eh_device_reset_handler(struct scsi_cmnd *scpnt)
{
return zfcp_task_mgmt_function(scpnt, FCP_TMF_LUN_RESET);
}
static int zfcp_scsi_eh_target_reset_handler(struct scsi_cmnd *scpnt)
{
return zfcp_task_mgmt_function(scpnt, FCP_TMF_TGT_RESET);
}
static int zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt)
{
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(scpnt->device);
struct zfcp_adapter *adapter = zfcp_sdev->port->adapter;
int ret;
zfcp_erp_adapter_reopen(adapter, 0, "schrh_1");
zfcp_erp_wait(adapter);
ret = fc_block_scsi_eh(scpnt);
if (ret)
return ret;
return SUCCESS;
}
struct scsi_transport_template *zfcp_scsi_transport_template;
static struct scsi_host_template zfcp_scsi_host_template = {
.module = THIS_MODULE,
.name = "zfcp",
.queuecommand = zfcp_scsi_queuecommand,
.eh_abort_handler = zfcp_scsi_eh_abort_handler,
.eh_device_reset_handler = zfcp_scsi_eh_device_reset_handler,
.eh_target_reset_handler = zfcp_scsi_eh_target_reset_handler,
.eh_host_reset_handler = zfcp_scsi_eh_host_reset_handler,
.slave_alloc = zfcp_scsi_slave_alloc,
.slave_configure = zfcp_scsi_slave_configure,
.slave_destroy = zfcp_scsi_slave_destroy,
.change_queue_depth = scsi_change_queue_depth,
.proc_name = "zfcp",
.can_queue = 4096,
.this_id = -1,
[SCSI] zfcp: block queue limits with data router Commit 86a9668a8d29ea711613e1cb37efa68e7c4db564 "[SCSI] zfcp: support for hardware data router" reduced the initial block queue limits in the scsi_host_template to the absolute minimum and adjusted them later on. However, the adjustment was too late for the BSG devices of Scsi_Host and fc_host. Therefore, ioctl(..., SG_IO, ...) with request or response size > 4kB to a BSG device of an fc_host or a Scsi_Host fails with EINVAL. As a result, users of such ioctl such as HBA_SendCTPassThru() in libzfcphbaapi return with error HBA_STATUS_ERROR. Initialize the block queue limits in zfcp_scsi_host_template to the greatest common denominator (GCD). While we cannot exploit the slightly enlarged maximum request size with data router, this should be neglectible. Doing so also avoids running into trouble after live guest relocation (LGR) / migration from a data router FCP device to an FCP device that does not support data router. In that case, zfcp would figure out the new limits on adapter recovery, but the fc_host and Scsi_Host (plus in fact all sdevs) still exist with the old and now too large queue limits. It should also OK, not to use half the size as in the DIX case, because fc_host and Scsi_Host do not transport FCP requests including SCSI commands using protection data. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> #3.2+ Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-26 23:33:45 +08:00
.sg_tablesize = (((QDIO_MAX_ELEMENTS_PER_BUFFER - 1)
* ZFCP_QDIO_MAX_SBALS_PER_REQ) - 2),
/* GCD, adjusted later */
.max_sectors = (((QDIO_MAX_ELEMENTS_PER_BUFFER - 1)
* ZFCP_QDIO_MAX_SBALS_PER_REQ) - 2) * 8,
/* GCD, adjusted later */
.dma_boundary = ZFCP_QDIO_SBALE_LEN - 1,
.use_clustering = 1,
.shost_attrs = zfcp_sysfs_shost_attrs,
.sdev_attrs = zfcp_sysfs_sdev_attrs,
.track_queue_depth = 1,
};
/**
* zfcp_scsi_adapter_register - Register SCSI and FC host with SCSI midlayer
* @adapter: The zfcp adapter to register with the SCSI midlayer
*/
int zfcp_scsi_adapter_register(struct zfcp_adapter *adapter)
{
struct ccw_dev_id dev_id;
if (adapter->scsi_host)
return 0;
ccw_device_get_id(adapter->ccw_device, &dev_id);
/* register adapter as SCSI host with mid layer of SCSI stack */
adapter->scsi_host = scsi_host_alloc(&zfcp_scsi_host_template,
sizeof (struct zfcp_adapter *));
if (!adapter->scsi_host) {
dev_err(&adapter->ccw_device->dev,
"Registering the FCP device with the "
"SCSI stack failed\n");
return -EIO;
}
/* tell the SCSI stack some characteristics of this adapter */
adapter->scsi_host->max_id = 511;
adapter->scsi_host->max_lun = 0xFFFFFFFF;
adapter->scsi_host->max_channel = 0;
adapter->scsi_host->unique_id = dev_id.devno;
adapter->scsi_host->max_cmd_len = 16; /* in struct fcp_cmnd */
adapter->scsi_host->transportt = zfcp_scsi_transport_template;
adapter->scsi_host->hostdata[0] = (unsigned long) adapter;
if (scsi_add_host(adapter->scsi_host, &adapter->ccw_device->dev)) {
scsi_host_put(adapter->scsi_host);
return -EIO;
}
return 0;
}
/**
* zfcp_scsi_adapter_unregister - Unregister SCSI and FC host from SCSI midlayer
* @adapter: The zfcp adapter to unregister.
*/
void zfcp_scsi_adapter_unregister(struct zfcp_adapter *adapter)
{
struct Scsi_Host *shost;
struct zfcp_port *port;
shost = adapter->scsi_host;
if (!shost)
return;
read_lock_irq(&adapter->port_list_lock);
list_for_each_entry(port, &adapter->port_list, list)
port->rport = NULL;
read_unlock_irq(&adapter->port_list_lock);
fc_remove_host(shost);
scsi_remove_host(shost);
scsi_host_put(shost);
adapter->scsi_host = NULL;
}
static struct fc_host_statistics*
zfcp_init_fc_host_stats(struct zfcp_adapter *adapter)
{
struct fc_host_statistics *fc_stats;
if (!adapter->fc_stats) {
fc_stats = kmalloc(sizeof(*fc_stats), GFP_KERNEL);
if (!fc_stats)
return NULL;
adapter->fc_stats = fc_stats; /* freed in adapter_release */
}
memset(adapter->fc_stats, 0, sizeof(*adapter->fc_stats));
return adapter->fc_stats;
}
static void zfcp_adjust_fc_host_stats(struct fc_host_statistics *fc_stats,
struct fsf_qtcb_bottom_port *data,
struct fsf_qtcb_bottom_port *old)
{
fc_stats->seconds_since_last_reset =
data->seconds_since_last_reset - old->seconds_since_last_reset;
fc_stats->tx_frames = data->tx_frames - old->tx_frames;
fc_stats->tx_words = data->tx_words - old->tx_words;
fc_stats->rx_frames = data->rx_frames - old->rx_frames;
fc_stats->rx_words = data->rx_words - old->rx_words;
fc_stats->lip_count = data->lip - old->lip;
fc_stats->nos_count = data->nos - old->nos;
fc_stats->error_frames = data->error_frames - old->error_frames;
fc_stats->dumped_frames = data->dumped_frames - old->dumped_frames;
fc_stats->link_failure_count = data->link_failure - old->link_failure;
fc_stats->loss_of_sync_count = data->loss_of_sync - old->loss_of_sync;
fc_stats->loss_of_signal_count =
data->loss_of_signal - old->loss_of_signal;
fc_stats->prim_seq_protocol_err_count =
data->psp_error_counts - old->psp_error_counts;
fc_stats->invalid_tx_word_count =
data->invalid_tx_words - old->invalid_tx_words;
fc_stats->invalid_crc_count = data->invalid_crcs - old->invalid_crcs;
fc_stats->fcp_input_requests =
data->input_requests - old->input_requests;
fc_stats->fcp_output_requests =
data->output_requests - old->output_requests;
fc_stats->fcp_control_requests =
data->control_requests - old->control_requests;
fc_stats->fcp_input_megabytes = data->input_mb - old->input_mb;
fc_stats->fcp_output_megabytes = data->output_mb - old->output_mb;
}
static void zfcp_set_fc_host_stats(struct fc_host_statistics *fc_stats,
struct fsf_qtcb_bottom_port *data)
{
fc_stats->seconds_since_last_reset = data->seconds_since_last_reset;
fc_stats->tx_frames = data->tx_frames;
fc_stats->tx_words = data->tx_words;
fc_stats->rx_frames = data->rx_frames;
fc_stats->rx_words = data->rx_words;
fc_stats->lip_count = data->lip;
fc_stats->nos_count = data->nos;
fc_stats->error_frames = data->error_frames;
fc_stats->dumped_frames = data->dumped_frames;
fc_stats->link_failure_count = data->link_failure;
fc_stats->loss_of_sync_count = data->loss_of_sync;
fc_stats->loss_of_signal_count = data->loss_of_signal;
fc_stats->prim_seq_protocol_err_count = data->psp_error_counts;
fc_stats->invalid_tx_word_count = data->invalid_tx_words;
fc_stats->invalid_crc_count = data->invalid_crcs;
fc_stats->fcp_input_requests = data->input_requests;
fc_stats->fcp_output_requests = data->output_requests;
fc_stats->fcp_control_requests = data->control_requests;
fc_stats->fcp_input_megabytes = data->input_mb;
fc_stats->fcp_output_megabytes = data->output_mb;
}
static struct fc_host_statistics *zfcp_get_fc_host_stats(struct Scsi_Host *host)
{
struct zfcp_adapter *adapter;
struct fc_host_statistics *fc_stats;
struct fsf_qtcb_bottom_port *data;
int ret;
adapter = (struct zfcp_adapter *)host->hostdata[0];
fc_stats = zfcp_init_fc_host_stats(adapter);
if (!fc_stats)
return NULL;
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
return NULL;
ret = zfcp_fsf_exchange_port_data_sync(adapter->qdio, data);
if (ret) {
kfree(data);
return NULL;
}
if (adapter->stats_reset &&
((jiffies/HZ - adapter->stats_reset) <
data->seconds_since_last_reset))
zfcp_adjust_fc_host_stats(fc_stats, data,
adapter->stats_reset_data);
else
zfcp_set_fc_host_stats(fc_stats, data);
kfree(data);
return fc_stats;
}
static void zfcp_reset_fc_host_stats(struct Scsi_Host *shost)
{
struct zfcp_adapter *adapter;
struct fsf_qtcb_bottom_port *data;
int ret;
adapter = (struct zfcp_adapter *)shost->hostdata[0];
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
return;
ret = zfcp_fsf_exchange_port_data_sync(adapter->qdio, data);
if (ret)
kfree(data);
else {
adapter->stats_reset = jiffies/HZ;
kfree(adapter->stats_reset_data);
adapter->stats_reset_data = data; /* finally freed in
adapter_release */
}
}
static void zfcp_get_host_port_state(struct Scsi_Host *shost)
{
struct zfcp_adapter *adapter =
(struct zfcp_adapter *)shost->hostdata[0];
int status = atomic_read(&adapter->status);
if ((status & ZFCP_STATUS_COMMON_RUNNING) &&
!(status & ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED))
fc_host_port_state(shost) = FC_PORTSTATE_ONLINE;
else if (status & ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED)
fc_host_port_state(shost) = FC_PORTSTATE_LINKDOWN;
else if (status & ZFCP_STATUS_COMMON_ERP_FAILED)
fc_host_port_state(shost) = FC_PORTSTATE_ERROR;
else
fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN;
}
static void zfcp_set_rport_dev_loss_tmo(struct fc_rport *rport, u32 timeout)
{
rport->dev_loss_tmo = timeout;
}
/**
* zfcp_scsi_terminate_rport_io - Terminate all I/O on a rport
* @rport: The FC rport where to teminate I/O
*
* Abort all pending SCSI commands for a port by closing the
* port. Using a reopen avoids a conflict with a shutdown
* overwriting a reopen. The "forced" ensures that a disappeared port
* is not opened again as valid due to the cached plogi data in
* non-NPIV mode.
*/
static void zfcp_scsi_terminate_rport_io(struct fc_rport *rport)
{
struct zfcp_port *port;
struct Scsi_Host *shost = rport_to_shost(rport);
struct zfcp_adapter *adapter =
(struct zfcp_adapter *)shost->hostdata[0];
port = zfcp_get_port_by_wwpn(adapter, rport->port_name);
if (port) {
zfcp_erp_port_forced_reopen(port, 0, "sctrpi1");
put_device(&port->dev);
}
}
static void zfcp_scsi_rport_register(struct zfcp_port *port)
{
struct fc_rport_identifiers ids;
struct fc_rport *rport;
if (port->rport)
return;
ids.node_name = port->wwnn;
ids.port_name = port->wwpn;
ids.port_id = port->d_id;
ids.roles = FC_RPORT_ROLE_FCP_TARGET;
rport = fc_remote_port_add(port->adapter->scsi_host, 0, &ids);
if (!rport) {
dev_err(&port->adapter->ccw_device->dev,
"Registering port 0x%016Lx failed\n",
(unsigned long long)port->wwpn);
return;
}
rport->maxframe_size = port->maxframe_size;
rport->supported_classes = port->supported_classes;
port->rport = rport;
port->starget_id = rport->scsi_target_id;
zfcp_unit_queue_scsi_scan(port);
}
static void zfcp_scsi_rport_block(struct zfcp_port *port)
{
struct fc_rport *rport = port->rport;
if (rport) {
fc_remote_port_delete(rport);
port->rport = NULL;
}
}
void zfcp_scsi_schedule_rport_register(struct zfcp_port *port)
{
get_device(&port->dev);
port->rport_task = RPORT_ADD;
if (!queue_work(port->adapter->work_queue, &port->rport_work))
put_device(&port->dev);
}
void zfcp_scsi_schedule_rport_block(struct zfcp_port *port)
{
get_device(&port->dev);
port->rport_task = RPORT_DEL;
if (port->rport && queue_work(port->adapter->work_queue,
&port->rport_work))
return;
put_device(&port->dev);
}
void zfcp_scsi_schedule_rports_block(struct zfcp_adapter *adapter)
{
unsigned long flags;
struct zfcp_port *port;
read_lock_irqsave(&adapter->port_list_lock, flags);
list_for_each_entry(port, &adapter->port_list, list)
zfcp_scsi_schedule_rport_block(port);
read_unlock_irqrestore(&adapter->port_list_lock, flags);
}
void zfcp_scsi_rport_work(struct work_struct *work)
{
struct zfcp_port *port = container_of(work, struct zfcp_port,
rport_work);
while (port->rport_task) {
if (port->rport_task == RPORT_ADD) {
port->rport_task = RPORT_NONE;
zfcp_scsi_rport_register(port);
} else {
port->rport_task = RPORT_NONE;
zfcp_scsi_rport_block(port);
}
}
put_device(&port->dev);
}
/**
* zfcp_scsi_set_prot - Configure DIF/DIX support in scsi_host
* @adapter: The adapter where to configure DIF/DIX for the SCSI host
*/
void zfcp_scsi_set_prot(struct zfcp_adapter *adapter)
{
unsigned int mask = 0;
unsigned int data_div;
struct Scsi_Host *shost = adapter->scsi_host;
data_div = atomic_read(&adapter->status) &
ZFCP_STATUS_ADAPTER_DATA_DIV_ENABLED;
if (enable_dif &&
adapter->adapter_features & FSF_FEATURE_DIF_PROT_TYPE1)
mask |= SHOST_DIF_TYPE1_PROTECTION;
if (enable_dif && data_div &&
adapter->adapter_features & FSF_FEATURE_DIX_PROT_TCPIP) {
mask |= SHOST_DIX_TYPE1_PROTECTION;
scsi_host_set_guard(shost, SHOST_DIX_GUARD_IP);
shost->sg_prot_tablesize = adapter->qdio->max_sbale_per_req / 2;
shost->sg_tablesize = adapter->qdio->max_sbale_per_req / 2;
shost->max_sectors = shost->sg_tablesize * 8;
}
scsi_host_set_prot(shost, mask);
}
/**
* zfcp_scsi_dif_sense_error - Report DIF/DIX error as driver sense error
* @scmd: The SCSI command to report the error for
* @ascq: The ASCQ to put in the sense buffer
*
* See the error handling in sd_done for the sense codes used here.
* Set DID_SOFT_ERROR to retry the request, if possible.
*/
void zfcp_scsi_dif_sense_error(struct scsi_cmnd *scmd, int ascq)
{
scsi_build_sense_buffer(1, scmd->sense_buffer,
ILLEGAL_REQUEST, 0x10, ascq);
set_driver_byte(scmd, DRIVER_SENSE);
scmd->result |= SAM_STAT_CHECK_CONDITION;
set_host_byte(scmd, DID_SOFT_ERROR);
}
struct fc_function_template zfcp_transport_functions = {
.show_starget_port_id = 1,
.show_starget_port_name = 1,
.show_starget_node_name = 1,
.show_rport_supported_classes = 1,
.show_rport_maxframe_size = 1,
.show_rport_dev_loss_tmo = 1,
.show_host_node_name = 1,
.show_host_port_name = 1,
.show_host_permanent_port_name = 1,
.show_host_supported_classes = 1,
.show_host_supported_fc4s = 1,
.show_host_supported_speeds = 1,
.show_host_maxframe_size = 1,
.show_host_serial_number = 1,
.get_fc_host_stats = zfcp_get_fc_host_stats,
.reset_fc_host_stats = zfcp_reset_fc_host_stats,
.set_rport_dev_loss_tmo = zfcp_set_rport_dev_loss_tmo,
.get_host_port_state = zfcp_get_host_port_state,
.terminate_rport_io = zfcp_scsi_terminate_rport_io,
.show_host_port_state = 1,
.show_host_active_fc4s = 1,
.bsg_request = zfcp_fc_exec_bsg_job,
.bsg_timeout = zfcp_fc_timeout_bsg_job,
/* no functions registered for following dynamic attributes but
directly set by LLDD */
.show_host_port_type = 1,
.show_host_symbolic_name = 1,
.show_host_speed = 1,
.show_host_port_id = 1,
.dd_bsg_size = sizeof(struct zfcp_fsf_ct_els),
};