2005-04-17 06:20:36 +08:00
|
|
|
/*
|
|
|
|
* linux/drivers/char/serial167.c
|
|
|
|
*
|
|
|
|
* Driver for MVME166/7 board serial ports, which are via a CD2401.
|
|
|
|
* Based very much on cyclades.c.
|
|
|
|
*
|
|
|
|
* MVME166/7 work by Richard Hirst [richard@sleepie.demon.co.uk]
|
|
|
|
*
|
|
|
|
* ==============================================================
|
|
|
|
*
|
|
|
|
* static char rcsid[] =
|
|
|
|
* "$Revision: 1.36.1.4 $$Date: 1995/03/29 06:14:14 $";
|
|
|
|
*
|
|
|
|
* linux/kernel/cyclades.c
|
|
|
|
*
|
|
|
|
* Maintained by Marcio Saito (cyclades@netcom.com) and
|
|
|
|
* Randolph Bentson (bentson@grieg.seaslug.org)
|
|
|
|
*
|
|
|
|
* Much of the design and some of the code came from serial.c
|
|
|
|
* which was copyright (C) 1991, 1992 Linus Torvalds. It was
|
|
|
|
* extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92,
|
|
|
|
* and then fixed as suggested by Michael K. Johnson 12/12/92.
|
|
|
|
*
|
|
|
|
* This version does not support shared irq's.
|
|
|
|
*
|
|
|
|
* $Log: cyclades.c,v $
|
|
|
|
* Revision 1.36.1.4 1995/03/29 06:14:14 bentson
|
|
|
|
* disambiguate between Cyclom-16Y and Cyclom-32Ye;
|
|
|
|
*
|
|
|
|
* Changes:
|
|
|
|
*
|
|
|
|
* 200 lines of changes record removed - RGH 11-10-95, starting work on
|
|
|
|
* converting this to drive serial ports on mvme166 (cd2401).
|
|
|
|
*
|
|
|
|
* Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 2000/08/25
|
|
|
|
* - get rid of verify_area
|
|
|
|
* - use get_user to access memory from userspace in set_threshold,
|
|
|
|
* set_default_threshold and set_timeout
|
|
|
|
* - don't use the panic function in serial167_init
|
|
|
|
* - do resource release on failure on serial167_init
|
|
|
|
* - include missing restore_flags in mvme167_serial_console_setup
|
|
|
|
*
|
|
|
|
* Kars de Jong <jongk@linux-m68k.org> - 2004/09/06
|
|
|
|
* - replace bottom half handler with task queue handler
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/errno.h>
|
|
|
|
#include <linux/signal.h>
|
|
|
|
#include <linux/sched.h>
|
|
|
|
#include <linux/timer.h>
|
|
|
|
#include <linux/tty.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/serial.h>
|
|
|
|
#include <linux/serialP.h>
|
|
|
|
#include <linux/string.h>
|
|
|
|
#include <linux/fcntl.h>
|
|
|
|
#include <linux/ptrace.h>
|
|
|
|
#include <linux/serial167.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/major.h>
|
|
|
|
#include <linux/mm.h>
|
|
|
|
#include <linux/console.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/bitops.h>
|
2006-10-10 04:27:42 +08:00
|
|
|
#include <linux/tty_flip.h>
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#include <asm/system.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/mvme16xhw.h>
|
|
|
|
#include <asm/bootinfo.h>
|
|
|
|
#include <asm/setup.h>
|
|
|
|
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
|
|
|
|
#include <asm/uaccess.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
|
|
|
|
#define SERIAL_PARANOIA_CHECK
|
|
|
|
#undef SERIAL_DEBUG_OPEN
|
|
|
|
#undef SERIAL_DEBUG_THROTTLE
|
|
|
|
#undef SERIAL_DEBUG_OTHER
|
|
|
|
#undef SERIAL_DEBUG_IO
|
|
|
|
#undef SERIAL_DEBUG_COUNT
|
|
|
|
#undef SERIAL_DEBUG_DTR
|
|
|
|
#undef CYCLOM_16Y_HACK
|
|
|
|
#define CYCLOM_ENABLE_MONITORING
|
|
|
|
|
|
|
|
#define WAKEUP_CHARS 256
|
|
|
|
|
|
|
|
#define STD_COM_FLAGS (0)
|
|
|
|
|
|
|
|
static struct tty_driver *cy_serial_driver;
|
|
|
|
extern int serial_console;
|
|
|
|
static struct cyclades_port *serial_console_info = NULL;
|
|
|
|
static unsigned int serial_console_cflag = 0;
|
|
|
|
u_char initial_console_speed;
|
|
|
|
|
|
|
|
/* Base address of cd2401 chip on mvme166/7 */
|
|
|
|
|
|
|
|
#define BASE_ADDR (0xfff45000)
|
|
|
|
#define pcc2chip ((volatile u_char *)0xfff42000)
|
|
|
|
#define PccSCCMICR 0x1d
|
|
|
|
#define PccSCCTICR 0x1e
|
|
|
|
#define PccSCCRICR 0x1f
|
|
|
|
#define PccTPIACKR 0x25
|
|
|
|
#define PccRPIACKR 0x27
|
|
|
|
#define PccIMLR 0x3f
|
|
|
|
|
|
|
|
/* This is the per-port data structure */
|
|
|
|
struct cyclades_port cy_port[] = {
|
2007-02-10 17:45:08 +08:00
|
|
|
/* CARD# */
|
|
|
|
{-1}, /* ttyS0 */
|
|
|
|
{-1}, /* ttyS1 */
|
|
|
|
{-1}, /* ttyS2 */
|
|
|
|
{-1}, /* ttyS3 */
|
2005-04-17 06:20:36 +08:00
|
|
|
};
|
2007-02-10 17:45:08 +08:00
|
|
|
|
2006-01-10 12:54:02 +08:00
|
|
|
#define NR_PORTS ARRAY_SIZE(cy_port)
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* This is used to look up the divisor speeds and the timeouts
|
|
|
|
* We're normally limited to 15 distinct baud rates. The extra
|
|
|
|
* are accessed via settings in info->flags.
|
|
|
|
* 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
|
|
|
|
* 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
|
|
|
|
* HI VHI
|
|
|
|
*/
|
|
|
|
static int baud_table[] = {
|
2007-02-10 17:45:08 +08:00
|
|
|
0, 50, 75, 110, 134, 150, 200, 300, 600, 1200,
|
|
|
|
1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000,
|
|
|
|
0
|
|
|
|
};
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#if 0
|
2007-02-10 17:45:08 +08:00
|
|
|
static char baud_co[] = { /* 25 MHz clock option table */
|
|
|
|
/* value => 00 01 02 03 04 */
|
|
|
|
/* divide by 8 32 128 512 2048 */
|
|
|
|
0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02,
|
|
|
|
0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
|
|
|
};
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
static char baud_bpr[] = { /* 25 MHz baud rate period table */
|
|
|
|
0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3,
|
|
|
|
0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15
|
|
|
|
};
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
|
|
|
/* I think 166 brd clocks 2401 at 20MHz.... */
|
|
|
|
|
|
|
|
/* These values are written directly to tcor, and >> 5 for writing to rcor */
|
2007-02-10 17:45:08 +08:00
|
|
|
static u_char baud_co[] = { /* 20 MHz clock option table */
|
|
|
|
0x00, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x60, 0x60, 0x40,
|
|
|
|
0x40, 0x40, 0x20, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
|
|
|
};
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/* These values written directly to tbpr/rbpr */
|
2007-02-10 17:45:08 +08:00
|
|
|
static u_char baud_bpr[] = { /* 20 MHz baud rate period table */
|
|
|
|
0x00, 0xc0, 0x80, 0x58, 0x6c, 0x40, 0xc0, 0x81, 0x40, 0x81,
|
|
|
|
0x57, 0x40, 0x81, 0x40, 0x81, 0x40, 0x2b, 0x20, 0x15, 0x10
|
|
|
|
};
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
static u_char baud_cor4[] = { /* receive threshold */
|
|
|
|
0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
|
|
|
|
0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07
|
|
|
|
};
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
static void shutdown(struct cyclades_port *);
|
2007-02-10 17:45:08 +08:00
|
|
|
static int startup(struct cyclades_port *);
|
2005-04-17 06:20:36 +08:00
|
|
|
static void cy_throttle(struct tty_struct *);
|
|
|
|
static void cy_unthrottle(struct tty_struct *);
|
|
|
|
static void config_setup(struct cyclades_port *);
|
|
|
|
extern void console_print(const char *);
|
|
|
|
#ifdef CYCLOM_SHOW_STATUS
|
|
|
|
static void show_status(int);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef CONFIG_REMOTE_DEBUG
|
|
|
|
static void debug_setup(void);
|
2007-02-10 17:45:08 +08:00
|
|
|
void queueDebugChar(int c);
|
2005-04-17 06:20:36 +08:00
|
|
|
int getDebugChar(void);
|
|
|
|
|
|
|
|
#define DEBUG_PORT 1
|
|
|
|
#define DEBUG_LEN 256
|
|
|
|
|
|
|
|
typedef struct {
|
2007-02-10 17:45:08 +08:00
|
|
|
int in;
|
|
|
|
int out;
|
|
|
|
unsigned char buf[DEBUG_LEN];
|
2005-04-17 06:20:36 +08:00
|
|
|
} debugq;
|
|
|
|
|
|
|
|
debugq debugiq;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* I have my own version of udelay(), as it is needed when initialising
|
|
|
|
* the chip, before the delay loop has been calibrated. Should probably
|
|
|
|
* reference one of the vmechip2 or pccchip2 counter for an accurate
|
|
|
|
* delay, but this wild guess will do for now.
|
|
|
|
*/
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
void my_udelay(long us)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
u_char x;
|
|
|
|
volatile u_char *p = &x;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
while (us--)
|
|
|
|
for (i = 100; i; i--)
|
|
|
|
x |= *p;
|
|
|
|
}
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
static inline int serial_paranoia_check(struct cyclades_port *info, char *name,
|
|
|
|
const char *routine)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
#ifdef SERIAL_PARANOIA_CHECK
|
2007-02-10 17:45:08 +08:00
|
|
|
if (!info) {
|
|
|
|
printk("Warning: null cyclades_port for (%s) in %s\n", name,
|
|
|
|
routine);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((long)info < (long)(&cy_port[0])
|
|
|
|
|| (long)(&cy_port[NR_PORTS]) < (long)info) {
|
|
|
|
printk("Warning: cyclades_port out of range for (%s) in %s\n",
|
|
|
|
name, routine);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (info->magic != CYCLADES_MAGIC) {
|
|
|
|
printk("Warning: bad magic number for serial struct (%s) in "
|
|
|
|
"%s\n", name, routine);
|
|
|
|
return 1;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
return 0;
|
2007-02-10 17:45:08 +08:00
|
|
|
} /* serial_paranoia_check */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#if 0
|
|
|
|
/* The following diagnostic routines allow the driver to spew
|
|
|
|
information on the screen, even (especially!) during interrupts.
|
|
|
|
*/
|
2007-02-10 17:45:08 +08:00
|
|
|
void SP(char *data)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
console_print(data);
|
|
|
|
local_irq_restore(flags);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
2007-02-10 17:45:08 +08:00
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
char scrn[2];
|
2007-02-10 17:45:08 +08:00
|
|
|
void CP(char data)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
scrn[0] = data;
|
|
|
|
console_print(scrn);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
} /* CP */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
void CP1(int data)
|
|
|
|
{
|
|
|
|
(data < 10) ? CP(data + '0') : CP(data + 'A' - 10);
|
|
|
|
} /* CP1 */
|
|
|
|
void CP2(int data)
|
|
|
|
{
|
|
|
|
CP1((data >> 4) & 0x0f);
|
|
|
|
CP1(data & 0x0f);
|
|
|
|
} /* CP2 */
|
|
|
|
void CP4(int data)
|
|
|
|
{
|
|
|
|
CP2((data >> 8) & 0xff);
|
|
|
|
CP2(data & 0xff);
|
|
|
|
} /* CP4 */
|
|
|
|
void CP8(long data)
|
|
|
|
{
|
|
|
|
CP4((data >> 16) & 0xffff);
|
|
|
|
CP4(data & 0xffff);
|
|
|
|
} /* CP8 */
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
|
|
|
/* This routine waits up to 1000 micro-seconds for the previous
|
|
|
|
command to the Cirrus chip to complete and then issues the
|
|
|
|
new command. An error is returned if the previous command
|
|
|
|
didn't finish within the time limit.
|
|
|
|
*/
|
2007-02-10 17:45:08 +08:00
|
|
|
u_short write_cy_cmd(volatile u_char * base_addr, u_char cmd)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
unsigned long flags;
|
|
|
|
volatile int i;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_save(flags);
|
2005-04-17 06:20:36 +08:00
|
|
|
/* Check to see that the previous command has completed */
|
2007-02-10 17:45:08 +08:00
|
|
|
for (i = 0; i < 100; i++) {
|
|
|
|
if (base_addr[CyCCR] == 0) {
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
my_udelay(10L);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
/* if the CCR never cleared, the previous command
|
2007-02-10 17:45:08 +08:00
|
|
|
didn't finish within the "reasonable time" */
|
|
|
|
if (i == 10) {
|
|
|
|
local_irq_restore(flags);
|
|
|
|
return (-1);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Issue the new command */
|
|
|
|
base_addr[CyCCR] = cmd;
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_restore(flags);
|
|
|
|
return (0);
|
|
|
|
} /* write_cy_cmd */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/* cy_start and cy_stop provide software output flow control as a
|
|
|
|
function of XON/XOFF, software CTS, and other such stuff. */
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
static void cy_stop(struct tty_struct *tty)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
|
|
|
|
volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
|
|
|
|
int channel;
|
|
|
|
unsigned long flags;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#ifdef SERIAL_DEBUG_OTHER
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cy_stop %s\n", tty->name); /* */
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (serial_paranoia_check(info, tty->name, "cy_stop"))
|
|
|
|
return;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
channel = info->line;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_save(flags);
|
|
|
|
base_addr[CyCAR] = (u_char) (channel); /* index channel */
|
|
|
|
base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
} /* cy_stop */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
static void cy_start(struct tty_struct *tty)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
|
|
|
|
volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
|
|
|
|
int channel;
|
|
|
|
unsigned long flags;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#ifdef SERIAL_DEBUG_OTHER
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cy_start %s\n", tty->name); /* */
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (serial_paranoia_check(info, tty->name, "cy_start"))
|
|
|
|
return;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
channel = info->line;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_save(flags);
|
|
|
|
base_addr[CyCAR] = (u_char) (channel);
|
|
|
|
base_addr[CyIER] |= CyTxMpty;
|
|
|
|
local_irq_restore(flags);
|
|
|
|
} /* cy_start */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/* The real interrupt service routines are called
|
|
|
|
whenever the card wants its hand held--chars
|
|
|
|
received, out buffer empty, modem change, etc.
|
|
|
|
*/
|
2007-02-10 17:45:08 +08:00
|
|
|
static irqreturn_t cd2401_rxerr_interrupt(int irq, void *dev_id)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
struct tty_struct *tty;
|
|
|
|
struct cyclades_port *info;
|
|
|
|
volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
|
|
|
|
unsigned char err, rfoc;
|
|
|
|
int channel;
|
|
|
|
char data;
|
|
|
|
|
|
|
|
/* determine the channel and change to that context */
|
|
|
|
channel = (u_short) (base_addr[CyLICR] >> 2);
|
|
|
|
info = &cy_port[channel];
|
|
|
|
info->last_active = jiffies;
|
|
|
|
|
|
|
|
if ((err = base_addr[CyRISR]) & CyTIMEOUT) {
|
|
|
|
/* This is a receive timeout interrupt, ignore it */
|
|
|
|
base_addr[CyREOIR] = CyNOTRANS;
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
/* Read a byte of data if there is any - assume the error
|
|
|
|
* is associated with this character */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if ((rfoc = base_addr[CyRFOC]) != 0)
|
|
|
|
data = base_addr[CyRDR];
|
|
|
|
else
|
|
|
|
data = 0;
|
|
|
|
|
|
|
|
/* if there is nowhere to put the data, discard it */
|
|
|
|
if (info->tty == 0) {
|
|
|
|
base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS;
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
} else { /* there is an open port for this data */
|
|
|
|
tty = info->tty;
|
|
|
|
if (err & info->ignore_status_mask) {
|
|
|
|
base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS;
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
if (tty_buffer_request_room(tty, 1) != 0) {
|
|
|
|
if (err & info->read_status_mask) {
|
|
|
|
if (err & CyBREAK) {
|
|
|
|
tty_insert_flip_char(tty, data,
|
|
|
|
TTY_BREAK);
|
|
|
|
if (info->flags & ASYNC_SAK) {
|
|
|
|
do_SAK(tty);
|
|
|
|
}
|
|
|
|
} else if (err & CyFRAME) {
|
|
|
|
tty_insert_flip_char(tty, data,
|
|
|
|
TTY_FRAME);
|
|
|
|
} else if (err & CyPARITY) {
|
|
|
|
tty_insert_flip_char(tty, data,
|
|
|
|
TTY_PARITY);
|
|
|
|
} else if (err & CyOVERRUN) {
|
|
|
|
tty_insert_flip_char(tty, 0,
|
|
|
|
TTY_OVERRUN);
|
|
|
|
/*
|
|
|
|
If the flip buffer itself is
|
|
|
|
overflowing, we still loose
|
|
|
|
the next incoming character.
|
|
|
|
*/
|
|
|
|
if (tty_buffer_request_room(tty, 1) !=
|
|
|
|
0) {
|
|
|
|
tty_insert_flip_char(tty, data,
|
|
|
|
TTY_FRAME);
|
|
|
|
}
|
|
|
|
/* These two conditions may imply */
|
|
|
|
/* a normal read should be done. */
|
|
|
|
/* else if(data & CyTIMEOUT) */
|
|
|
|
/* else if(data & CySPECHAR) */
|
|
|
|
} else {
|
|
|
|
tty_insert_flip_char(tty, 0,
|
|
|
|
TTY_NORMAL);
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
tty_insert_flip_char(tty, data, TTY_NORMAL);
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
/* there was a software buffer overrun
|
|
|
|
and nothing could be done about it!!! */
|
|
|
|
}
|
|
|
|
}
|
|
|
|
tty_schedule_flip(tty);
|
|
|
|
/* end of service */
|
2005-04-17 06:20:36 +08:00
|
|
|
base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS;
|
|
|
|
return IRQ_HANDLED;
|
2007-02-10 17:45:08 +08:00
|
|
|
} /* cy_rxerr_interrupt */
|
|
|
|
|
|
|
|
static irqreturn_t cd2401_modem_interrupt(int irq, void *dev_id)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
struct cyclades_port *info;
|
|
|
|
volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
|
|
|
|
int channel;
|
|
|
|
int mdm_change;
|
|
|
|
int mdm_status;
|
|
|
|
|
|
|
|
/* determine the channel and change to that context */
|
|
|
|
channel = (u_short) (base_addr[CyLICR] >> 2);
|
|
|
|
info = &cy_port[channel];
|
|
|
|
info->last_active = jiffies;
|
|
|
|
|
|
|
|
mdm_change = base_addr[CyMISR];
|
|
|
|
mdm_status = base_addr[CyMSVR1];
|
|
|
|
|
|
|
|
if (info->tty == 0) { /* nowhere to put the data, ignore it */
|
|
|
|
;
|
|
|
|
} else {
|
|
|
|
if ((mdm_change & CyDCD)
|
|
|
|
&& (info->flags & ASYNC_CHECK_CD)) {
|
|
|
|
if (mdm_status & CyDCD) {
|
2005-04-17 06:20:36 +08:00
|
|
|
/* CP('!'); */
|
2008-02-07 16:16:40 +08:00
|
|
|
wake_up_interruptible(&info->open_wait);
|
2007-02-10 17:45:08 +08:00
|
|
|
} else {
|
2005-04-17 06:20:36 +08:00
|
|
|
/* CP('@'); */
|
2008-02-07 16:16:40 +08:00
|
|
|
tty_hangup(info->tty);
|
|
|
|
wake_up_interruptible(&info->open_wait);
|
|
|
|
info->flags &= ~ASYNC_NORMAL_ACTIVE;
|
2007-02-10 17:45:08 +08:00
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
2007-02-10 17:45:08 +08:00
|
|
|
if ((mdm_change & CyCTS)
|
|
|
|
&& (info->flags & ASYNC_CTS_FLOW)) {
|
|
|
|
if (info->tty->stopped) {
|
|
|
|
if (mdm_status & CyCTS) {
|
|
|
|
/* !!! cy_start isn't used because... */
|
|
|
|
info->tty->stopped = 0;
|
|
|
|
base_addr[CyIER] |= CyTxMpty;
|
2008-02-07 16:16:40 +08:00
|
|
|
tty_wakeup(info->tty);
|
2007-02-10 17:45:08 +08:00
|
|
|
}
|
|
|
|
} else {
|
|
|
|
if (!(mdm_status & CyCTS)) {
|
|
|
|
/* !!! cy_stop isn't used because... */
|
|
|
|
info->tty->stopped = 1;
|
|
|
|
base_addr[CyIER] &=
|
|
|
|
~(CyTxMpty | CyTxRdy);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (mdm_status & CyDSR) {
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
}
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyMEOIR] = 0;
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
} /* cy_modem_interrupt */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
static irqreturn_t cd2401_tx_interrupt(int irq, void *dev_id)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
struct cyclades_port *info;
|
|
|
|
volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
|
|
|
|
int channel;
|
|
|
|
int char_count, saved_cnt;
|
|
|
|
int outch;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
/* determine the channel and change to that context */
|
|
|
|
channel = (u_short) (base_addr[CyLICR] >> 2);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_REMOTE_DEBUG
|
2007-02-10 17:45:08 +08:00
|
|
|
if (channel == DEBUG_PORT) {
|
|
|
|
panic("TxInt on debug port!!!");
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
info = &cy_port[channel];
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
/* validate the port number (as configured and open) */
|
|
|
|
if ((channel < 0) || (NR_PORTS <= channel)) {
|
|
|
|
base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
|
|
|
|
base_addr[CyTEOIR] = CyNOTRANS;
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
info->last_active = jiffies;
|
|
|
|
if (info->tty == 0) {
|
|
|
|
base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
|
|
|
|
base_addr[CyTEOIR] = CyNOTRANS;
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* load the on-chip space available for outbound data */
|
|
|
|
saved_cnt = char_count = base_addr[CyTFTC];
|
|
|
|
|
|
|
|
if (info->x_char) { /* send special char */
|
|
|
|
outch = info->x_char;
|
2005-04-17 06:20:36 +08:00
|
|
|
base_addr[CyTDR] = outch;
|
|
|
|
char_count--;
|
2007-02-10 17:45:08 +08:00
|
|
|
info->x_char = 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (info->x_break) {
|
|
|
|
/* The Cirrus chip requires the "Embedded Transmit
|
|
|
|
Commands" of start break, delay, and end break
|
|
|
|
sequences to be sent. The duration of the
|
|
|
|
break is given in TICs, which runs at HZ
|
|
|
|
(typically 100) and the PPR runs at 200 Hz,
|
|
|
|
so the delay is duration * 200/HZ, and thus a
|
|
|
|
break can run from 1/100 sec to about 5/4 sec.
|
|
|
|
Need to check these values - RGH 141095.
|
|
|
|
*/
|
|
|
|
base_addr[CyTDR] = 0; /* start break */
|
|
|
|
base_addr[CyTDR] = 0x81;
|
|
|
|
base_addr[CyTDR] = 0; /* delay a bit */
|
|
|
|
base_addr[CyTDR] = 0x82;
|
|
|
|
base_addr[CyTDR] = info->x_break * 200 / HZ;
|
|
|
|
base_addr[CyTDR] = 0; /* terminate break */
|
|
|
|
base_addr[CyTDR] = 0x83;
|
|
|
|
char_count -= 7;
|
|
|
|
info->x_break = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
while (char_count > 0) {
|
|
|
|
if (!info->xmit_cnt) {
|
|
|
|
base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (info->xmit_buf == 0) {
|
|
|
|
base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (info->tty->stopped || info->tty->hw_stopped) {
|
|
|
|
base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
/* Because the Embedded Transmit Commands have been
|
|
|
|
enabled, we must check to see if the escape
|
|
|
|
character, NULL, is being sent. If it is, we
|
|
|
|
must ensure that there is room for it to be
|
|
|
|
doubled in the output stream. Therefore we
|
|
|
|
no longer advance the pointer when the character
|
|
|
|
is fetched, but rather wait until after the check
|
|
|
|
for a NULL output character. (This is necessary
|
|
|
|
because there may not be room for the two chars
|
|
|
|
needed to send a NULL.
|
|
|
|
*/
|
|
|
|
outch = info->xmit_buf[info->xmit_tail];
|
|
|
|
if (outch) {
|
|
|
|
info->xmit_cnt--;
|
|
|
|
info->xmit_tail = (info->xmit_tail + 1)
|
|
|
|
& (PAGE_SIZE - 1);
|
|
|
|
base_addr[CyTDR] = outch;
|
|
|
|
char_count--;
|
|
|
|
} else {
|
|
|
|
if (char_count > 1) {
|
|
|
|
info->xmit_cnt--;
|
|
|
|
info->xmit_tail = (info->xmit_tail + 1)
|
|
|
|
& (PAGE_SIZE - 1);
|
|
|
|
base_addr[CyTDR] = outch;
|
|
|
|
base_addr[CyTDR] = 0;
|
|
|
|
char_count--;
|
|
|
|
char_count--;
|
|
|
|
} else {
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2008-02-07 16:16:40 +08:00
|
|
|
if (info->xmit_cnt < WAKEUP_CHARS)
|
|
|
|
tty_wakeup(info->tty);
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyTEOIR] = (char_count != saved_cnt) ? 0 : CyNOTRANS;
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
} /* cy_tx_interrupt */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
static irqreturn_t cd2401_rx_interrupt(int irq, void *dev_id)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
struct tty_struct *tty;
|
|
|
|
struct cyclades_port *info;
|
|
|
|
volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
|
|
|
|
int channel;
|
|
|
|
char data;
|
|
|
|
int char_count;
|
|
|
|
int save_cnt;
|
|
|
|
int len;
|
|
|
|
|
|
|
|
/* determine the channel and change to that context */
|
|
|
|
channel = (u_short) (base_addr[CyLICR] >> 2);
|
|
|
|
info = &cy_port[channel];
|
|
|
|
info->last_active = jiffies;
|
|
|
|
save_cnt = char_count = base_addr[CyRFOC];
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_REMOTE_DEBUG
|
2007-02-10 17:45:08 +08:00
|
|
|
if (channel == DEBUG_PORT) {
|
|
|
|
while (char_count--) {
|
|
|
|
data = base_addr[CyRDR];
|
|
|
|
queueDebugChar(data);
|
|
|
|
}
|
|
|
|
} else
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
/* if there is nowhere to put the data, discard it */
|
|
|
|
if (info->tty == 0) {
|
|
|
|
while (char_count--) {
|
|
|
|
data = base_addr[CyRDR];
|
|
|
|
}
|
|
|
|
} else { /* there is an open port for this data */
|
|
|
|
tty = info->tty;
|
|
|
|
/* load # characters available from the chip */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#ifdef CYCLOM_ENABLE_MONITORING
|
2007-02-10 17:45:08 +08:00
|
|
|
++info->mon.int_count;
|
|
|
|
info->mon.char_count += char_count;
|
|
|
|
if (char_count > info->mon.char_max)
|
|
|
|
info->mon.char_max = char_count;
|
|
|
|
info->mon.char_last = char_count;
|
|
|
|
#endif
|
|
|
|
len = tty_buffer_request_room(tty, char_count);
|
|
|
|
while (len--) {
|
|
|
|
data = base_addr[CyRDR];
|
|
|
|
tty_insert_flip_char(tty, data, TTY_NORMAL);
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef CYCLOM_16Y_HACK
|
2007-02-10 17:45:08 +08:00
|
|
|
udelay(10L);
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
}
|
|
|
|
tty_schedule_flip(tty);
|
|
|
|
}
|
|
|
|
/* end of service */
|
|
|
|
base_addr[CyREOIR] = save_cnt ? 0 : CyNOTRANS;
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
} /* cy_rx_interrupt */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/* This is called whenever a port becomes active;
|
|
|
|
interrupts are enabled and DTR & RTS are turned on.
|
|
|
|
*/
|
2007-02-10 17:45:08 +08:00
|
|
|
static int startup(struct cyclades_port *info)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
unsigned long flags;
|
|
|
|
volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
|
|
|
|
int channel;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (info->flags & ASYNC_INITIALIZED) {
|
|
|
|
return 0;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (!info->type) {
|
|
|
|
if (info->tty) {
|
|
|
|
set_bit(TTY_IO_ERROR, &info->tty->flags);
|
|
|
|
}
|
|
|
|
return 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
2007-02-10 17:45:08 +08:00
|
|
|
if (!info->xmit_buf) {
|
|
|
|
info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
|
|
|
|
if (!info->xmit_buf) {
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
config_setup(info);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
channel = info->line;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#ifdef SERIAL_DEBUG_OPEN
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("startup channel %d\n", channel);
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_save(flags);
|
|
|
|
base_addr[CyCAR] = (u_char) channel;
|
|
|
|
write_cy_cmd(base_addr, CyENB_RCVR | CyENB_XMTR);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyCAR] = (u_char) channel; /* !!! Is this needed? */
|
2005-04-17 06:20:36 +08:00
|
|
|
base_addr[CyMSVR1] = CyRTS;
|
|
|
|
/* CP('S');CP('1'); */
|
|
|
|
base_addr[CyMSVR2] = CyDTR;
|
|
|
|
|
|
|
|
#ifdef SERIAL_DEBUG_DTR
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cyc: %d: raising DTR\n", __LINE__);
|
|
|
|
printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
|
|
|
|
base_addr[CyMSVR2]);
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
|
|
|
base_addr[CyIER] |= CyRxData;
|
|
|
|
info->flags |= ASYNC_INITIALIZED;
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (info->tty) {
|
|
|
|
clear_bit(TTY_IO_ERROR, &info->tty->flags);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_restore(flags);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#ifdef SERIAL_DEBUG_OPEN
|
2007-02-10 17:45:08 +08:00
|
|
|
printk(" done\n");
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
return 0;
|
|
|
|
} /* startup */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
void start_xmit(struct cyclades_port *info)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
unsigned long flags;
|
|
|
|
volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
|
|
|
|
int channel;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
channel = info->line;
|
|
|
|
local_irq_save(flags);
|
2005-04-17 06:20:36 +08:00
|
|
|
base_addr[CyCAR] = channel;
|
|
|
|
base_addr[CyIER] |= CyTxMpty;
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_restore(flags);
|
|
|
|
} /* start_xmit */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* This routine shuts down a serial port; interrupts are disabled,
|
|
|
|
* and DTR is dropped if the hangup on close termio flag is on.
|
|
|
|
*/
|
2007-02-10 17:45:08 +08:00
|
|
|
static void shutdown(struct cyclades_port *info)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
unsigned long flags;
|
|
|
|
volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
|
|
|
|
int channel;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (!(info->flags & ASYNC_INITIALIZED)) {
|
2005-04-17 06:20:36 +08:00
|
|
|
/* CP('$'); */
|
2007-02-10 17:45:08 +08:00
|
|
|
return;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
channel = info->line;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#ifdef SERIAL_DEBUG_OPEN
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("shutdown channel %d\n", channel);
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
/* !!! REALLY MUST WAIT FOR LAST CHARACTER TO BE
|
|
|
|
SENT BEFORE DROPPING THE LINE !!! (Perhaps
|
|
|
|
set some flag that is read when XMTY happens.)
|
|
|
|
Other choices are to delay some fixed interval
|
|
|
|
or schedule some later processing.
|
|
|
|
*/
|
|
|
|
local_irq_save(flags);
|
|
|
|
if (info->xmit_buf) {
|
|
|
|
free_page((unsigned long)info->xmit_buf);
|
|
|
|
info->xmit_buf = NULL;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyCAR] = (u_char) channel;
|
2005-04-17 06:20:36 +08:00
|
|
|
if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyMSVR1] = 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
/* CP('C');CP('1'); */
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyMSVR2] = 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_DTR
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cyc: %d: dropping DTR\n", __LINE__);
|
|
|
|
printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
|
|
|
|
base_addr[CyMSVR2]);
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
}
|
|
|
|
write_cy_cmd(base_addr, CyDIS_RCVR);
|
|
|
|
/* it may be appropriate to clear _XMIT at
|
|
|
|
some later date (after testing)!!! */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (info->tty) {
|
|
|
|
set_bit(TTY_IO_ERROR, &info->tty->flags);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
info->flags &= ~ASYNC_INITIALIZED;
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_restore(flags);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#ifdef SERIAL_DEBUG_OPEN
|
2007-02-10 17:45:08 +08:00
|
|
|
printk(" done\n");
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
} /* shutdown */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* This routine finds or computes the various line characteristics.
|
|
|
|
*/
|
2007-02-10 17:45:08 +08:00
|
|
|
static void config_setup(struct cyclades_port *info)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
unsigned long flags;
|
|
|
|
volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
|
|
|
|
int channel;
|
|
|
|
unsigned cflag;
|
|
|
|
int i;
|
|
|
|
unsigned char ti, need_init_chan = 0;
|
|
|
|
|
|
|
|
if (!info->tty || !info->tty->termios) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
if (info->line == -1) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
cflag = info->tty->termios->c_cflag;
|
|
|
|
|
|
|
|
/* baud rate */
|
|
|
|
i = cflag & CBAUD;
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef CBAUDEX
|
|
|
|
/* Starting with kernel 1.1.65, there is direct support for
|
|
|
|
higher baud rates. The following code supports those
|
|
|
|
changes. The conditional aspect allows this driver to be
|
|
|
|
used for earlier as well as later kernel versions. (The
|
|
|
|
mapping is slightly different from serial.c because there
|
|
|
|
is still the possibility of supporting 75 kbit/sec with
|
|
|
|
the Cyclades board.)
|
|
|
|
*/
|
2007-02-10 17:45:08 +08:00
|
|
|
if (i & CBAUDEX) {
|
|
|
|
if (i == B57600)
|
|
|
|
i = 16;
|
|
|
|
else if (i == B115200)
|
|
|
|
i = 18;
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef B78600
|
2007-02-10 17:45:08 +08:00
|
|
|
else if (i == B78600)
|
|
|
|
i = 17;
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
else
|
|
|
|
info->tty->termios->c_cflag &= ~CBAUDEX;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
if (i == 15) {
|
|
|
|
if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
|
|
|
|
i += 1;
|
|
|
|
if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
|
|
|
|
i += 3;
|
|
|
|
}
|
|
|
|
/* Don't ever change the speed of the console port. It will
|
|
|
|
* run at the speed specified in bootinfo, or at 19.2K */
|
|
|
|
/* Actually, it should run at whatever speed 166Bug was using */
|
|
|
|
/* Note info->timeout isn't used at present */
|
|
|
|
if (info != serial_console_info) {
|
|
|
|
info->tbpr = baud_bpr[i]; /* Tx BPR */
|
|
|
|
info->tco = baud_co[i]; /* Tx CO */
|
|
|
|
info->rbpr = baud_bpr[i]; /* Rx BPR */
|
|
|
|
info->rco = baud_co[i] >> 5; /* Rx CO */
|
|
|
|
if (baud_table[i] == 134) {
|
|
|
|
info->timeout =
|
|
|
|
(info->xmit_fifo_size * HZ * 30 / 269) + 2;
|
|
|
|
/* get it right for 134.5 baud */
|
|
|
|
} else if (baud_table[i]) {
|
|
|
|
info->timeout =
|
|
|
|
(info->xmit_fifo_size * HZ * 15 / baud_table[i]) +
|
|
|
|
2;
|
|
|
|
/* this needs to be propagated into the card info */
|
|
|
|
} else {
|
|
|
|
info->timeout = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/* By tradition (is it a standard?) a baud rate of zero
|
|
|
|
implies the line should be/has been closed. A bit
|
|
|
|
later in this routine such a test is performed. */
|
|
|
|
|
|
|
|
/* byte size and parity */
|
|
|
|
info->cor7 = 0;
|
|
|
|
info->cor6 = 0;
|
|
|
|
info->cor5 = 0;
|
|
|
|
info->cor4 = (info->default_threshold ? info->default_threshold : baud_cor4[i]); /* receive threshold */
|
|
|
|
/* Following two lines added 101295, RGH. */
|
|
|
|
/* It is obviously wrong to access CyCORx, and not info->corx here,
|
|
|
|
* try and remember to fix it later! */
|
|
|
|
channel = info->line;
|
|
|
|
base_addr[CyCAR] = (u_char) channel;
|
|
|
|
if (C_CLOCAL(info->tty)) {
|
|
|
|
if (base_addr[CyIER] & CyMdmCh)
|
|
|
|
base_addr[CyIER] &= ~CyMdmCh; /* without modem intr */
|
|
|
|
/* ignore 1->0 modem transitions */
|
|
|
|
if (base_addr[CyCOR4] & (CyDSR | CyCTS | CyDCD))
|
|
|
|
base_addr[CyCOR4] &= ~(CyDSR | CyCTS | CyDCD);
|
|
|
|
/* ignore 0->1 modem transitions */
|
|
|
|
if (base_addr[CyCOR5] & (CyDSR | CyCTS | CyDCD))
|
|
|
|
base_addr[CyCOR5] &= ~(CyDSR | CyCTS | CyDCD);
|
2005-04-17 06:20:36 +08:00
|
|
|
} else {
|
2007-02-10 17:45:08 +08:00
|
|
|
if ((base_addr[CyIER] & CyMdmCh) != CyMdmCh)
|
|
|
|
base_addr[CyIER] |= CyMdmCh; /* with modem intr */
|
|
|
|
/* act on 1->0 modem transitions */
|
|
|
|
if ((base_addr[CyCOR4] & (CyDSR | CyCTS | CyDCD)) !=
|
|
|
|
(CyDSR | CyCTS | CyDCD))
|
|
|
|
base_addr[CyCOR4] |= CyDSR | CyCTS | CyDCD;
|
|
|
|
/* act on 0->1 modem transitions */
|
|
|
|
if ((base_addr[CyCOR5] & (CyDSR | CyCTS | CyDCD)) !=
|
|
|
|
(CyDSR | CyCTS | CyDCD))
|
|
|
|
base_addr[CyCOR5] |= CyDSR | CyCTS | CyDCD;
|
|
|
|
}
|
|
|
|
info->cor3 = (cflag & CSTOPB) ? Cy_2_STOP : Cy_1_STOP;
|
|
|
|
info->cor2 = CyETC;
|
|
|
|
switch (cflag & CSIZE) {
|
|
|
|
case CS5:
|
|
|
|
info->cor1 = Cy_5_BITS;
|
|
|
|
break;
|
|
|
|
case CS6:
|
|
|
|
info->cor1 = Cy_6_BITS;
|
|
|
|
break;
|
|
|
|
case CS7:
|
|
|
|
info->cor1 = Cy_7_BITS;
|
|
|
|
break;
|
|
|
|
case CS8:
|
|
|
|
info->cor1 = Cy_8_BITS;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (cflag & PARENB) {
|
|
|
|
if (cflag & PARODD) {
|
|
|
|
info->cor1 |= CyPARITY_O;
|
|
|
|
} else {
|
|
|
|
info->cor1 |= CyPARITY_E;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
info->cor1 |= CyPARITY_NONE;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* CTS flow control flag */
|
2005-04-17 06:20:36 +08:00
|
|
|
#if 0
|
2007-02-10 17:45:08 +08:00
|
|
|
/* Don't complcate matters for now! RGH 141095 */
|
|
|
|
if (cflag & CRTSCTS) {
|
|
|
|
info->flags |= ASYNC_CTS_FLOW;
|
|
|
|
info->cor2 |= CyCtsAE;
|
|
|
|
} else {
|
|
|
|
info->flags &= ~ASYNC_CTS_FLOW;
|
|
|
|
info->cor2 &= ~CyCtsAE;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
if (cflag & CLOCAL)
|
|
|
|
info->flags &= ~ASYNC_CHECK_CD;
|
|
|
|
else
|
|
|
|
info->flags |= ASYNC_CHECK_CD;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/***********************************************
|
|
|
|
The hardware option, CyRtsAO, presents RTS when
|
|
|
|
the chip has characters to send. Since most modems
|
|
|
|
use RTS as reverse (inbound) flow control, this
|
|
|
|
option is not used. If inbound flow control is
|
|
|
|
necessary, DTR can be programmed to provide the
|
|
|
|
appropriate signals for use with a non-standard
|
|
|
|
cable. Contact Marcio Saito for details.
|
|
|
|
***********************************************/
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
channel = info->line;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_save(flags);
|
|
|
|
base_addr[CyCAR] = (u_char) channel;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/* CyCMR set once only in mvme167_init_serial() */
|
|
|
|
if (base_addr[CyLICR] != channel << 2)
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyLICR] = channel << 2;
|
2005-04-17 06:20:36 +08:00
|
|
|
if (base_addr[CyLIVR] != 0x5c)
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyLIVR] = 0x5c;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
/* tx and rx baud rate */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
if (base_addr[CyCOR1] != info->cor1)
|
2007-02-10 17:45:08 +08:00
|
|
|
need_init_chan = 1;
|
2005-04-17 06:20:36 +08:00
|
|
|
if (base_addr[CyTCOR] != info->tco)
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyTCOR] = info->tco;
|
2005-04-17 06:20:36 +08:00
|
|
|
if (base_addr[CyTBPR] != info->tbpr)
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyTBPR] = info->tbpr;
|
2005-04-17 06:20:36 +08:00
|
|
|
if (base_addr[CyRCOR] != info->rco)
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyRCOR] = info->rco;
|
2005-04-17 06:20:36 +08:00
|
|
|
if (base_addr[CyRBPR] != info->rbpr)
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyRBPR] = info->rbpr;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/* set line characteristics according configuration */
|
|
|
|
|
|
|
|
if (base_addr[CySCHR1] != START_CHAR(info->tty))
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CySCHR1] = START_CHAR(info->tty);
|
2005-04-17 06:20:36 +08:00
|
|
|
if (base_addr[CySCHR2] != STOP_CHAR(info->tty))
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CySCHR2] = STOP_CHAR(info->tty);
|
2005-04-17 06:20:36 +08:00
|
|
|
if (base_addr[CySCRL] != START_CHAR(info->tty))
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CySCRL] = START_CHAR(info->tty);
|
2005-04-17 06:20:36 +08:00
|
|
|
if (base_addr[CySCRH] != START_CHAR(info->tty))
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CySCRH] = START_CHAR(info->tty);
|
2005-04-17 06:20:36 +08:00
|
|
|
if (base_addr[CyCOR1] != info->cor1)
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyCOR1] = info->cor1;
|
2005-04-17 06:20:36 +08:00
|
|
|
if (base_addr[CyCOR2] != info->cor2)
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyCOR2] = info->cor2;
|
2005-04-17 06:20:36 +08:00
|
|
|
if (base_addr[CyCOR3] != info->cor3)
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyCOR3] = info->cor3;
|
2005-04-17 06:20:36 +08:00
|
|
|
if (base_addr[CyCOR4] != info->cor4)
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyCOR4] = info->cor4;
|
2005-04-17 06:20:36 +08:00
|
|
|
if (base_addr[CyCOR5] != info->cor5)
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyCOR5] = info->cor5;
|
2005-04-17 06:20:36 +08:00
|
|
|
if (base_addr[CyCOR6] != info->cor6)
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyCOR6] = info->cor6;
|
2005-04-17 06:20:36 +08:00
|
|
|
if (base_addr[CyCOR7] != info->cor7)
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyCOR7] = info->cor7;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
if (need_init_chan)
|
2007-02-10 17:45:08 +08:00
|
|
|
write_cy_cmd(base_addr, CyINIT_CHAN);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyCAR] = (u_char) channel; /* !!! Is this needed? */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/* 2ms default rx timeout */
|
|
|
|
ti = info->default_timeout ? info->default_timeout : 0x02;
|
|
|
|
if (base_addr[CyRTPRL] != ti)
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyRTPRL] = ti;
|
2005-04-17 06:20:36 +08:00
|
|
|
if (base_addr[CyRTPRH] != 0)
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyRTPRH] = 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/* Set up RTS here also ????? RGH 141095 */
|
2007-02-10 17:45:08 +08:00
|
|
|
if (i == 0) { /* baud rate is zero, turn off line */
|
|
|
|
if ((base_addr[CyMSVR2] & CyDTR) == CyDTR)
|
|
|
|
base_addr[CyMSVR2] = 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_DTR
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cyc: %d: dropping DTR\n", __LINE__);
|
|
|
|
printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
|
|
|
|
base_addr[CyMSVR2]);
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
} else {
|
|
|
|
if ((base_addr[CyMSVR2] & CyDTR) != CyDTR)
|
|
|
|
base_addr[CyMSVR2] = CyDTR;
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_DTR
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cyc: %d: raising DTR\n", __LINE__);
|
|
|
|
printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
|
|
|
|
base_addr[CyMSVR2]);
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (info->tty) {
|
|
|
|
clear_bit(TTY_IO_ERROR, &info->tty->flags);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_restore(flags);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
} /* config_setup */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
static void cy_put_char(struct tty_struct *tty, unsigned char ch)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
|
|
|
|
unsigned long flags;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#ifdef SERIAL_DEBUG_IO
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cy_put_char %s(0x%02x)\n", tty->name, ch);
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (serial_paranoia_check(info, tty->name, "cy_put_char"))
|
|
|
|
return;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (!info->xmit_buf)
|
|
|
|
return;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_save(flags);
|
2005-04-17 06:20:36 +08:00
|
|
|
if (info->xmit_cnt >= PAGE_SIZE - 1) {
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_restore(flags);
|
|
|
|
return;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
info->xmit_buf[info->xmit_head++] = ch;
|
|
|
|
info->xmit_head &= PAGE_SIZE - 1;
|
|
|
|
info->xmit_cnt++;
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_restore(flags);
|
|
|
|
} /* cy_put_char */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
static void cy_flush_chars(struct tty_struct *tty)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
|
|
|
|
unsigned long flags;
|
|
|
|
volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
|
|
|
|
int channel;
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_IO
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cy_flush_chars %s\n", tty->name); /* */
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (serial_paranoia_check(info, tty->name, "cy_flush_chars"))
|
|
|
|
return;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (info->xmit_cnt <= 0 || tty->stopped
|
|
|
|
|| tty->hw_stopped || !info->xmit_buf)
|
|
|
|
return;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
channel = info->line;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_save(flags);
|
2005-04-17 06:20:36 +08:00
|
|
|
base_addr[CyCAR] = channel;
|
|
|
|
base_addr[CyIER] |= CyTxMpty;
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_restore(flags);
|
|
|
|
} /* cy_flush_chars */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/* This routine gets called when tty_write has put something into
|
|
|
|
the write_queue. If the port is not already transmitting stuff,
|
|
|
|
start it off by enabling interrupts. The interrupt service
|
|
|
|
routine will then ensure that the characters are sent. If the
|
|
|
|
port is already active, there is no need to kick it.
|
|
|
|
*/
|
2007-02-10 17:45:08 +08:00
|
|
|
static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
|
|
|
|
unsigned long flags;
|
|
|
|
int c, total = 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#ifdef SERIAL_DEBUG_IO
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cy_write %s\n", tty->name); /* */
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (serial_paranoia_check(info, tty->name, "cy_write")) {
|
|
|
|
return 0;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (!info->xmit_buf) {
|
|
|
|
return 0;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
while (1) {
|
|
|
|
local_irq_save(flags);
|
|
|
|
c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
|
|
|
|
SERIAL_XMIT_SIZE - info->xmit_head));
|
|
|
|
if (c <= 0) {
|
|
|
|
local_irq_restore(flags);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
memcpy(info->xmit_buf + info->xmit_head, buf, c);
|
|
|
|
info->xmit_head =
|
|
|
|
(info->xmit_head + c) & (SERIAL_XMIT_SIZE - 1);
|
|
|
|
info->xmit_cnt += c;
|
|
|
|
local_irq_restore(flags);
|
|
|
|
|
|
|
|
buf += c;
|
|
|
|
count -= c;
|
|
|
|
total += c;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
|
|
|
|
start_xmit(info);
|
|
|
|
}
|
|
|
|
return total;
|
|
|
|
} /* cy_write */
|
|
|
|
|
|
|
|
static int cy_write_room(struct tty_struct *tty)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
|
|
|
|
int ret;
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_IO
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cy_write_room %s\n", tty->name); /* */
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (serial_paranoia_check(info, tty->name, "cy_write_room"))
|
|
|
|
return 0;
|
|
|
|
ret = PAGE_SIZE - info->xmit_cnt - 1;
|
|
|
|
if (ret < 0)
|
|
|
|
ret = 0;
|
|
|
|
return ret;
|
|
|
|
} /* cy_write_room */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
static int cy_chars_in_buffer(struct tty_struct *tty)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_IO
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cy_chars_in_buffer %s %d\n", tty->name, info->xmit_cnt); /* */
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer"))
|
|
|
|
return 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
return info->xmit_cnt;
|
|
|
|
} /* cy_chars_in_buffer */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
static void cy_flush_buffer(struct tty_struct *tty)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
|
|
|
|
unsigned long flags;
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_IO
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cy_flush_buffer %s\n", tty->name); /* */
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (serial_paranoia_check(info, tty->name, "cy_flush_buffer"))
|
|
|
|
return;
|
|
|
|
local_irq_save(flags);
|
2005-04-17 06:20:36 +08:00
|
|
|
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_restore(flags);
|
|
|
|
tty_wakeup(tty);
|
|
|
|
} /* cy_flush_buffer */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/* This routine is called by the upper-layer tty layer to signal
|
|
|
|
that incoming characters should be throttled or that the
|
|
|
|
throttle should be released.
|
|
|
|
*/
|
2007-02-10 17:45:08 +08:00
|
|
|
static void cy_throttle(struct tty_struct *tty)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
|
|
|
|
unsigned long flags;
|
|
|
|
volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
|
|
|
|
int channel;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#ifdef SERIAL_DEBUG_THROTTLE
|
2007-02-10 17:45:08 +08:00
|
|
|
char buf[64];
|
|
|
|
|
|
|
|
printk("throttle %s: %d....\n", tty_name(tty, buf),
|
|
|
|
tty->ldisc.chars_in_buffer(tty));
|
|
|
|
printk("cy_throttle %s\n", tty->name);
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (serial_paranoia_check(info, tty->name, "cy_nthrottle")) {
|
|
|
|
return;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (I_IXOFF(tty)) {
|
|
|
|
info->x_char = STOP_CHAR(tty);
|
|
|
|
/* Should use the "Send Special Character" feature!!! */
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
channel = info->line;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_save(flags);
|
|
|
|
base_addr[CyCAR] = (u_char) channel;
|
2005-04-17 06:20:36 +08:00
|
|
|
base_addr[CyMSVR1] = 0;
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_restore(flags);
|
|
|
|
} /* cy_throttle */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
static void cy_unthrottle(struct tty_struct *tty)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
|
|
|
|
unsigned long flags;
|
|
|
|
volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
|
|
|
|
int channel;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#ifdef SERIAL_DEBUG_THROTTLE
|
2007-02-10 17:45:08 +08:00
|
|
|
char buf[64];
|
|
|
|
|
|
|
|
printk("throttle %s: %d....\n", tty_name(tty, buf),
|
|
|
|
tty->ldisc.chars_in_buffer(tty));
|
|
|
|
printk("cy_unthrottle %s\n", tty->name);
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (serial_paranoia_check(info, tty->name, "cy_nthrottle")) {
|
|
|
|
return;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (I_IXOFF(tty)) {
|
|
|
|
info->x_char = START_CHAR(tty);
|
|
|
|
/* Should use the "Send Special Character" feature!!! */
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
channel = info->line;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_save(flags);
|
|
|
|
base_addr[CyCAR] = (u_char) channel;
|
2005-04-17 06:20:36 +08:00
|
|
|
base_addr[CyMSVR1] = CyRTS;
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_restore(flags);
|
|
|
|
} /* cy_unthrottle */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
static int
|
2007-02-10 17:45:08 +08:00
|
|
|
get_serial_info(struct cyclades_port *info,
|
|
|
|
struct serial_struct __user * retinfo)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
struct serial_struct tmp;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/* CP('g'); */
|
2007-02-10 17:45:08 +08:00
|
|
|
if (!retinfo)
|
|
|
|
return -EFAULT;
|
|
|
|
memset(&tmp, 0, sizeof(tmp));
|
|
|
|
tmp.type = info->type;
|
|
|
|
tmp.line = info->line;
|
|
|
|
tmp.port = info->line;
|
|
|
|
tmp.irq = 0;
|
|
|
|
tmp.flags = info->flags;
|
|
|
|
tmp.baud_base = 0; /*!!! */
|
|
|
|
tmp.close_delay = info->close_delay;
|
|
|
|
tmp.custom_divisor = 0; /*!!! */
|
|
|
|
tmp.hub6 = 0; /*!!! */
|
|
|
|
return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
|
|
|
|
} /* get_serial_info */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
static int
|
2007-02-10 17:45:08 +08:00
|
|
|
set_serial_info(struct cyclades_port *info,
|
|
|
|
struct serial_struct __user * new_info)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
struct serial_struct new_serial;
|
|
|
|
struct cyclades_port old_info;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/* CP('s'); */
|
2007-02-10 17:45:08 +08:00
|
|
|
if (!new_info)
|
|
|
|
return -EFAULT;
|
|
|
|
if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
|
|
|
|
return -EFAULT;
|
|
|
|
old_info = *info;
|
|
|
|
|
|
|
|
if (!capable(CAP_SYS_ADMIN)) {
|
|
|
|
if ((new_serial.close_delay != info->close_delay) ||
|
|
|
|
((new_serial.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK) !=
|
|
|
|
(info->flags & ASYNC_FLAGS & ~ASYNC_USR_MASK)))
|
|
|
|
return -EPERM;
|
|
|
|
info->flags = ((info->flags & ~ASYNC_USR_MASK) |
|
|
|
|
(new_serial.flags & ASYNC_USR_MASK));
|
|
|
|
goto check_and_exit;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
/*
|
|
|
|
* OK, past this point, all the error checking has been done.
|
|
|
|
* At this point, we start making changes.....
|
|
|
|
*/
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
info->flags = ((info->flags & ~ASYNC_FLAGS) |
|
|
|
|
(new_serial.flags & ASYNC_FLAGS));
|
|
|
|
info->close_delay = new_serial.close_delay;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
check_and_exit:
|
|
|
|
if (info->flags & ASYNC_INITIALIZED) {
|
|
|
|
config_setup(info);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
return startup(info);
|
|
|
|
} /* set_serial_info */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
static int cy_tiocmget(struct tty_struct *tty, struct file *file)
|
|
|
|
{
|
|
|
|
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
|
|
|
|
int channel;
|
|
|
|
volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
|
|
|
|
unsigned long flags;
|
|
|
|
unsigned char status;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
channel = info->line;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_save(flags);
|
|
|
|
base_addr[CyCAR] = (u_char) channel;
|
|
|
|
status = base_addr[CyMSVR1] | base_addr[CyMSVR2];
|
|
|
|
local_irq_restore(flags);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
return ((status & CyRTS) ? TIOCM_RTS : 0)
|
|
|
|
| ((status & CyDTR) ? TIOCM_DTR : 0)
|
|
|
|
| ((status & CyDCD) ? TIOCM_CAR : 0)
|
|
|
|
| ((status & CyDSR) ? TIOCM_DSR : 0)
|
|
|
|
| ((status & CyCTS) ? TIOCM_CTS : 0);
|
|
|
|
} /* cy_tiocmget */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
static int
|
|
|
|
cy_tiocmset(struct tty_struct *tty, struct file *file,
|
|
|
|
unsigned int set, unsigned int clear)
|
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
|
|
|
|
int channel;
|
|
|
|
volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
channel = info->line;
|
|
|
|
|
|
|
|
if (set & TIOCM_RTS) {
|
|
|
|
local_irq_save(flags);
|
|
|
|
base_addr[CyCAR] = (u_char) channel;
|
2005-04-17 06:20:36 +08:00
|
|
|
base_addr[CyMSVR1] = CyRTS;
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_restore(flags);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
2007-02-10 17:45:08 +08:00
|
|
|
if (set & TIOCM_DTR) {
|
|
|
|
local_irq_save(flags);
|
|
|
|
base_addr[CyCAR] = (u_char) channel;
|
2005-04-17 06:20:36 +08:00
|
|
|
/* CP('S');CP('2'); */
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyMSVR2] = CyDTR;
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_DTR
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cyc: %d: raising DTR\n", __LINE__);
|
|
|
|
printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
|
|
|
|
base_addr[CyMSVR2]);
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_restore(flags);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (clear & TIOCM_RTS) {
|
|
|
|
local_irq_save(flags);
|
|
|
|
base_addr[CyCAR] = (u_char) channel;
|
2005-04-17 06:20:36 +08:00
|
|
|
base_addr[CyMSVR1] = 0;
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_restore(flags);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
2007-02-10 17:45:08 +08:00
|
|
|
if (clear & TIOCM_DTR) {
|
|
|
|
local_irq_save(flags);
|
|
|
|
base_addr[CyCAR] = (u_char) channel;
|
2005-04-17 06:20:36 +08:00
|
|
|
/* CP('C');CP('2'); */
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyMSVR2] = 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_DTR
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cyc: %d: dropping DTR\n", __LINE__);
|
|
|
|
printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
|
|
|
|
base_addr[CyMSVR2]);
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_restore(flags);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
return 0;
|
|
|
|
} /* set_modem_info */
|
|
|
|
|
|
|
|
static void send_break(struct cyclades_port *info, int duration)
|
|
|
|
{ /* Let the transmit ISR take care of this (since it
|
|
|
|
requires stuffing characters into the output stream).
|
|
|
|
*/
|
|
|
|
info->x_break = duration;
|
|
|
|
if (!info->xmit_cnt) {
|
|
|
|
start_xmit(info);
|
|
|
|
}
|
|
|
|
} /* send_break */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
static int
|
2007-02-10 17:45:08 +08:00
|
|
|
get_mon_info(struct cyclades_port *info, struct cyclades_monitor __user * mon)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor)))
|
|
|
|
return -EFAULT;
|
|
|
|
info->mon.int_count = 0;
|
|
|
|
info->mon.char_count = 0;
|
|
|
|
info->mon.char_max = 0;
|
|
|
|
info->mon.char_last = 0;
|
|
|
|
return 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
static int set_threshold(struct cyclades_port *info, unsigned long __user * arg)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
|
|
|
|
unsigned long value;
|
|
|
|
int channel;
|
|
|
|
|
|
|
|
if (get_user(value, arg))
|
|
|
|
return -EFAULT;
|
|
|
|
|
|
|
|
channel = info->line;
|
|
|
|
info->cor4 &= ~CyREC_FIFO;
|
|
|
|
info->cor4 |= value & CyREC_FIFO;
|
|
|
|
base_addr[CyCOR4] = info->cor4;
|
|
|
|
return 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2007-02-10 17:45:08 +08:00
|
|
|
get_threshold(struct cyclades_port *info, unsigned long __user * value)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
|
|
|
|
int channel;
|
|
|
|
unsigned long tmp;
|
|
|
|
|
|
|
|
channel = info->line;
|
|
|
|
|
|
|
|
tmp = base_addr[CyCOR4] & CyREC_FIFO;
|
|
|
|
return put_user(tmp, value);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2007-02-10 17:45:08 +08:00
|
|
|
set_default_threshold(struct cyclades_port *info, unsigned long __user * arg)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
unsigned long value;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (get_user(value, arg))
|
|
|
|
return -EFAULT;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
info->default_threshold = value & 0x0f;
|
|
|
|
return 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2007-02-10 17:45:08 +08:00
|
|
|
get_default_threshold(struct cyclades_port *info, unsigned long __user * value)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
return put_user(info->default_threshold, value);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
static int set_timeout(struct cyclades_port *info, unsigned long __user * arg)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
|
|
|
|
int channel;
|
|
|
|
unsigned long value;
|
|
|
|
|
|
|
|
if (get_user(value, arg))
|
|
|
|
return -EFAULT;
|
|
|
|
|
|
|
|
channel = info->line;
|
|
|
|
|
|
|
|
base_addr[CyRTPRL] = value & 0xff;
|
|
|
|
base_addr[CyRTPRH] = (value >> 8) & 0xff;
|
|
|
|
return 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
static int get_timeout(struct cyclades_port *info, unsigned long __user * value)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
|
|
|
|
int channel;
|
|
|
|
unsigned long tmp;
|
|
|
|
|
|
|
|
channel = info->line;
|
|
|
|
|
|
|
|
tmp = base_addr[CyRTPRL];
|
|
|
|
return put_user(tmp, value);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
static int set_default_timeout(struct cyclades_port *info, unsigned long value)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
info->default_timeout = value & 0xff;
|
|
|
|
return 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2007-02-10 17:45:08 +08:00
|
|
|
get_default_timeout(struct cyclades_port *info, unsigned long __user * value)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
return put_user(info->default_timeout, value);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2007-02-10 17:45:08 +08:00
|
|
|
cy_ioctl(struct tty_struct *tty, struct file *file,
|
|
|
|
unsigned int cmd, unsigned long arg)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
unsigned long val;
|
|
|
|
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
|
|
|
|
int ret_val = 0;
|
|
|
|
void __user *argp = (void __user *)arg;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#ifdef SERIAL_DEBUG_OTHER
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cy_ioctl %s, cmd = %x arg = %lx\n", tty->name, cmd, arg); /* */
|
|
|
|
#endif
|
|
|
|
|
2008-04-30 15:53:22 +08:00
|
|
|
lock_kernel();
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
switch (cmd) {
|
|
|
|
case CYGETMON:
|
|
|
|
ret_val = get_mon_info(info, argp);
|
|
|
|
break;
|
|
|
|
case CYGETTHRESH:
|
|
|
|
ret_val = get_threshold(info, argp);
|
|
|
|
break;
|
|
|
|
case CYSETTHRESH:
|
|
|
|
ret_val = set_threshold(info, argp);
|
|
|
|
break;
|
|
|
|
case CYGETDEFTHRESH:
|
|
|
|
ret_val = get_default_threshold(info, argp);
|
|
|
|
break;
|
|
|
|
case CYSETDEFTHRESH:
|
|
|
|
ret_val = set_default_threshold(info, argp);
|
|
|
|
break;
|
|
|
|
case CYGETTIMEOUT:
|
|
|
|
ret_val = get_timeout(info, argp);
|
|
|
|
break;
|
|
|
|
case CYSETTIMEOUT:
|
|
|
|
ret_val = set_timeout(info, argp);
|
|
|
|
break;
|
|
|
|
case CYGETDEFTIMEOUT:
|
|
|
|
ret_val = get_default_timeout(info, argp);
|
|
|
|
break;
|
|
|
|
case CYSETDEFTIMEOUT:
|
|
|
|
ret_val = set_default_timeout(info, (unsigned long)arg);
|
|
|
|
break;
|
|
|
|
case TCSBRK: /* SVID version: non-zero arg --> no break */
|
|
|
|
ret_val = tty_check_change(tty);
|
|
|
|
if (ret_val)
|
|
|
|
break;
|
|
|
|
tty_wait_until_sent(tty, 0);
|
|
|
|
if (!arg)
|
|
|
|
send_break(info, HZ / 4); /* 1/4 second */
|
|
|
|
break;
|
|
|
|
case TCSBRKP: /* support for POSIX tcsendbreak() */
|
|
|
|
ret_val = tty_check_change(tty);
|
|
|
|
if (ret_val)
|
|
|
|
break;
|
|
|
|
tty_wait_until_sent(tty, 0);
|
|
|
|
send_break(info, arg ? arg * (HZ / 10) : HZ / 4);
|
2005-04-17 06:20:36 +08:00
|
|
|
break;
|
|
|
|
|
|
|
|
/* The following commands are incompletely implemented!!! */
|
2007-02-10 17:45:08 +08:00
|
|
|
case TIOCGSERIAL:
|
|
|
|
ret_val = get_serial_info(info, argp);
|
|
|
|
break;
|
|
|
|
case TIOCSSERIAL:
|
|
|
|
ret_val = set_serial_info(info, argp);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
ret_val = -ENOIOCTLCMD;
|
|
|
|
}
|
2008-04-30 15:53:22 +08:00
|
|
|
unlock_kernel();
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#ifdef SERIAL_DEBUG_OTHER
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cy_ioctl done\n");
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
return ret_val;
|
|
|
|
} /* cy_ioctl */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#ifdef SERIAL_DEBUG_OTHER
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cy_set_termios %s\n", tty->name);
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (tty->termios->c_cflag == old_termios->c_cflag)
|
|
|
|
return;
|
|
|
|
config_setup(info);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if ((old_termios->c_cflag & CRTSCTS) &&
|
|
|
|
!(tty->termios->c_cflag & CRTSCTS)) {
|
|
|
|
tty->stopped = 0;
|
|
|
|
cy_start(tty);
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef tytso_patch_94Nov25_1726
|
2007-02-10 17:45:08 +08:00
|
|
|
if (!(old_termios->c_cflag & CLOCAL) &&
|
|
|
|
(tty->termios->c_cflag & CLOCAL))
|
|
|
|
wake_up_interruptible(&info->open_wait);
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
} /* cy_set_termios */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
static void cy_close(struct tty_struct *tty, struct file *filp)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/* CP('C'); */
|
|
|
|
#ifdef SERIAL_DEBUG_OTHER
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cy_close %s\n", tty->name);
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (!info || serial_paranoia_check(info, tty->name, "cy_close")) {
|
|
|
|
return;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_OPEN
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cy_close %s, count = %d\n", tty->name, info->count);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
if ((tty->count == 1) && (info->count != 1)) {
|
|
|
|
/*
|
|
|
|
* Uh, oh. tty->count is 1, which means that the tty
|
|
|
|
* structure will be freed. Info->count should always
|
|
|
|
* be one in these conditions. If it's greater than
|
|
|
|
* one, we've got real problems, since it means the
|
|
|
|
* serial port won't be shutdown.
|
|
|
|
*/
|
|
|
|
printk("cy_close: bad serial port count; tty->count is 1, "
|
|
|
|
"info->count is %d\n", info->count);
|
|
|
|
info->count = 1;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_COUNT
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cyc: %d: decrementing count to %d\n", __LINE__,
|
|
|
|
info->count - 1);
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
if (--info->count < 0) {
|
|
|
|
printk("cy_close: bad serial port count for ttys%d: %d\n",
|
|
|
|
info->line, info->count);
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_COUNT
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cyc: %d: setting count to 0\n", __LINE__);
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
info->count = 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
2007-02-10 17:45:08 +08:00
|
|
|
if (info->count)
|
|
|
|
return;
|
|
|
|
info->flags |= ASYNC_CLOSING;
|
|
|
|
if (info->flags & ASYNC_INITIALIZED)
|
|
|
|
tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */
|
|
|
|
shutdown(info);
|
2008-04-30 15:53:59 +08:00
|
|
|
cy_flush_buffer(tty);
|
2007-02-10 17:45:08 +08:00
|
|
|
tty_ldisc_flush(tty);
|
|
|
|
info->tty = NULL;
|
|
|
|
if (info->blocked_open) {
|
|
|
|
if (info->close_delay) {
|
|
|
|
msleep_interruptible(jiffies_to_msecs
|
|
|
|
(info->close_delay));
|
|
|
|
}
|
|
|
|
wake_up_interruptible(&info->open_wait);
|
|
|
|
}
|
|
|
|
info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
|
|
|
|
wake_up_interruptible(&info->close_wait);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#ifdef SERIAL_DEBUG_OTHER
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cy_close done\n");
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
} /* cy_close */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* cy_hangup() --- called by tty_hangup() when a hangup is signaled.
|
|
|
|
*/
|
2007-02-10 17:45:08 +08:00
|
|
|
void cy_hangup(struct tty_struct *tty)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_OTHER
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cy_hangup %s\n", tty->name); /* */
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (serial_paranoia_check(info, tty->name, "cy_hangup"))
|
|
|
|
return;
|
|
|
|
|
|
|
|
shutdown(info);
|
2005-04-17 06:20:36 +08:00
|
|
|
#if 0
|
2007-02-10 17:45:08 +08:00
|
|
|
info->event = 0;
|
|
|
|
info->count = 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_COUNT
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cyc: %d: setting count to 0\n", __LINE__);
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
info->tty = 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
info->flags &= ~ASYNC_NORMAL_ACTIVE;
|
|
|
|
wake_up_interruptible(&info->open_wait);
|
|
|
|
} /* cy_hangup */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* ------------------------------------------------------------
|
|
|
|
* cy_open() and friends
|
|
|
|
* ------------------------------------------------------------
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int
|
2007-02-10 17:45:08 +08:00
|
|
|
block_til_ready(struct tty_struct *tty, struct file *filp,
|
|
|
|
struct cyclades_port *info)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
|
|
unsigned long flags;
|
|
|
|
int channel;
|
|
|
|
int retval;
|
|
|
|
volatile u_char *base_addr = (u_char *) BASE_ADDR;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If the device is in the middle of being closed, then block
|
|
|
|
* until it's done, and then try again.
|
|
|
|
*/
|
|
|
|
if (info->flags & ASYNC_CLOSING) {
|
|
|
|
interruptible_sleep_on(&info->close_wait);
|
|
|
|
if (info->flags & ASYNC_HUP_NOTIFY) {
|
|
|
|
return -EAGAIN;
|
|
|
|
} else {
|
|
|
|
return -ERESTARTSYS;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If non-blocking mode is set, then make the check up front
|
|
|
|
* and then exit.
|
|
|
|
*/
|
|
|
|
if (filp->f_flags & O_NONBLOCK) {
|
|
|
|
info->flags |= ASYNC_NORMAL_ACTIVE;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Block waiting for the carrier detect and the line to become
|
|
|
|
* free (i.e., not in use by the callout). While we are in
|
|
|
|
* this loop, info->count is dropped by one, so that
|
|
|
|
* cy_close() knows when to free things. We restore it upon
|
|
|
|
* exit, either normal or abnormal.
|
|
|
|
*/
|
|
|
|
retval = 0;
|
|
|
|
add_wait_queue(&info->open_wait, &wait);
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_OPEN
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("block_til_ready before block: %s, count = %d\n",
|
|
|
|
tty->name, info->count);
|
|
|
|
/**/
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
info->count--;
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_COUNT
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cyc: %d: decrementing count to %d\n", __LINE__, info->count);
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
info->blocked_open++;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
channel = info->line;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
while (1) {
|
|
|
|
local_irq_save(flags);
|
|
|
|
base_addr[CyCAR] = (u_char) channel;
|
|
|
|
base_addr[CyMSVR1] = CyRTS;
|
2005-04-17 06:20:36 +08:00
|
|
|
/* CP('S');CP('4'); */
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyMSVR2] = CyDTR;
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_DTR
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cyc: %d: raising DTR\n", __LINE__);
|
|
|
|
printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
|
|
|
|
base_addr[CyMSVR2]);
|
|
|
|
#endif
|
|
|
|
local_irq_restore(flags);
|
|
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
|
|
if (tty_hung_up_p(filp)
|
|
|
|
|| !(info->flags & ASYNC_INITIALIZED)) {
|
|
|
|
if (info->flags & ASYNC_HUP_NOTIFY) {
|
|
|
|
retval = -EAGAIN;
|
|
|
|
} else {
|
|
|
|
retval = -ERESTARTSYS;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
local_irq_save(flags);
|
|
|
|
base_addr[CyCAR] = (u_char) channel;
|
2005-04-17 06:20:36 +08:00
|
|
|
/* CP('L');CP1(1 && C_CLOCAL(tty)); CP1(1 && (base_addr[CyMSVR1] & CyDCD) ); */
|
2007-02-10 17:45:08 +08:00
|
|
|
if (!(info->flags & ASYNC_CLOSING)
|
|
|
|
&& (C_CLOCAL(tty)
|
|
|
|
|| (base_addr[CyMSVR1] & CyDCD))) {
|
|
|
|
local_irq_restore(flags);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
local_irq_restore(flags);
|
|
|
|
if (signal_pending(current)) {
|
|
|
|
retval = -ERESTARTSYS;
|
|
|
|
break;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_OPEN
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("block_til_ready blocking: %s, count = %d\n",
|
|
|
|
tty->name, info->count);
|
|
|
|
/**/
|
|
|
|
#endif
|
|
|
|
schedule();
|
|
|
|
}
|
2007-05-08 15:30:52 +08:00
|
|
|
__set_current_state(TASK_RUNNING);
|
2007-02-10 17:45:08 +08:00
|
|
|
remove_wait_queue(&info->open_wait, &wait);
|
|
|
|
if (!tty_hung_up_p(filp)) {
|
|
|
|
info->count++;
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_COUNT
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cyc: %d: incrementing count to %d\n", __LINE__,
|
|
|
|
info->count);
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
}
|
|
|
|
info->blocked_open--;
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_OPEN
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("block_til_ready after blocking: %s, count = %d\n",
|
|
|
|
tty->name, info->count);
|
|
|
|
/**/
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
if (retval)
|
|
|
|
return retval;
|
|
|
|
info->flags |= ASYNC_NORMAL_ACTIVE;
|
|
|
|
return 0;
|
|
|
|
} /* block_til_ready */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* This routine is called whenever a serial port is opened. It
|
|
|
|
* performs the serial-specific initialization for the tty structure.
|
|
|
|
*/
|
2007-02-10 17:45:08 +08:00
|
|
|
int cy_open(struct tty_struct *tty, struct file *filp)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
struct cyclades_port *info;
|
|
|
|
int retval, line;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/* CP('O'); */
|
2007-02-10 17:45:08 +08:00
|
|
|
line = tty->index;
|
|
|
|
if ((line < 0) || (NR_PORTS <= line)) {
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
info = &cy_port[line];
|
|
|
|
if (info->line < 0) {
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_OTHER
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cy_open %s\n", tty->name); /* */
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
if (serial_paranoia_check(info, tty->name, "cy_open")) {
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_OPEN
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cy_open %s, count = %d\n", tty->name, info->count);
|
|
|
|
/**/
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
info->count++;
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_COUNT
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cyc: %d: incrementing count to %d\n", __LINE__, info->count);
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
tty->driver_data = info;
|
|
|
|
info->tty = tty;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
/*
|
|
|
|
* Start up serial port
|
|
|
|
*/
|
|
|
|
retval = startup(info);
|
|
|
|
if (retval) {
|
|
|
|
return retval;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
retval = block_til_ready(tty, filp, info);
|
|
|
|
if (retval) {
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_OPEN
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cy_open returning after block_til_ready with %d\n",
|
|
|
|
retval);
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
return retval;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_OPEN
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cy_open done\n");
|
|
|
|
/**/
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-02-10 17:45:08 +08:00
|
|
|
return 0;
|
|
|
|
} /* cy_open */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* ---------------------------------------------------------------------
|
|
|
|
* serial167_init() and friends
|
|
|
|
*
|
|
|
|
* serial167_init() is called at boot-time to initialize the serial driver.
|
|
|
|
* ---------------------------------------------------------------------
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This routine prints out the appropriate serial driver version
|
|
|
|
* number, and identifies which options were configured into this
|
|
|
|
* driver.
|
|
|
|
*/
|
2007-02-10 17:45:08 +08:00
|
|
|
static void show_version(void)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("MVME166/167 cd2401 driver\n");
|
|
|
|
} /* show_version */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/* initialize chips on card -- return number of valid
|
|
|
|
chips (which is number of ports/4) */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This initialises the hardware to a reasonable state. It should
|
|
|
|
* probe the chip first so as to copy 166-Bug setup as a default for
|
|
|
|
* port 0. It initialises CMR to CyASYNC; that is never done again, so
|
|
|
|
* as to limit the number of CyINIT_CHAN commands in normal running.
|
|
|
|
*
|
|
|
|
* ... I wonder what I should do if this fails ...
|
|
|
|
*/
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
void mvme167_serial_console_setup(int cflag)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
|
2005-04-17 06:20:36 +08:00
|
|
|
int ch;
|
|
|
|
u_char spd;
|
|
|
|
u_char rcor, rbpr, badspeed = 0;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* First probe channel zero of the chip, to see what speed has
|
|
|
|
* been selected.
|
|
|
|
*/
|
|
|
|
|
|
|
|
base_addr[CyCAR] = 0;
|
|
|
|
|
|
|
|
rcor = base_addr[CyRCOR] << 5;
|
|
|
|
rbpr = base_addr[CyRBPR];
|
|
|
|
|
|
|
|
for (spd = 0; spd < sizeof(baud_bpr); spd++)
|
|
|
|
if (rbpr == baud_bpr[spd] && rcor == baud_co[spd])
|
|
|
|
break;
|
|
|
|
if (spd >= sizeof(baud_bpr)) {
|
|
|
|
spd = 14; /* 19200 */
|
|
|
|
badspeed = 1; /* Failed to identify speed */
|
|
|
|
}
|
|
|
|
initial_console_speed = spd;
|
|
|
|
|
|
|
|
/* OK, we have chosen a speed, now reset and reinitialise */
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
my_udelay(20000L); /* Allow time for any active o/p to complete */
|
|
|
|
if (base_addr[CyCCR] != 0x00) {
|
|
|
|
local_irq_restore(flags);
|
|
|
|
/* printk(" chip is never idle (CCR != 0)\n"); */
|
|
|
|
return;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyCCR] = CyCHIP_RESET; /* Reset the chip */
|
|
|
|
my_udelay(1000L);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (base_addr[CyGFRCR] == 0x00) {
|
|
|
|
local_irq_restore(flags);
|
|
|
|
/* printk(" chip is not responding (GFRCR stayed 0)\n"); */
|
|
|
|
return;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* System clock is 20Mhz, divided by 2048, so divide by 10 for a 1.0ms
|
|
|
|
* tick
|
|
|
|
*/
|
|
|
|
|
|
|
|
base_addr[CyTPR] = 10;
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyPILR1] = 0x01; /* Interrupt level for modem change */
|
|
|
|
base_addr[CyPILR2] = 0x02; /* Interrupt level for tx ints */
|
|
|
|
base_addr[CyPILR3] = 0x03; /* Interrupt level for rx ints */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Attempt to set up all channels to something reasonable, and
|
|
|
|
* bang out a INIT_CHAN command. We should then be able to limit
|
|
|
|
* the ammount of fiddling we have to do in normal running.
|
|
|
|
*/
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
for (ch = 3; ch >= 0; ch--) {
|
|
|
|
base_addr[CyCAR] = (u_char) ch;
|
2005-04-17 06:20:36 +08:00
|
|
|
base_addr[CyIER] = 0;
|
|
|
|
base_addr[CyCMR] = CyASYNC;
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyLICR] = (u_char) ch << 2;
|
2005-04-17 06:20:36 +08:00
|
|
|
base_addr[CyLIVR] = 0x5c;
|
|
|
|
base_addr[CyTCOR] = baud_co[spd];
|
|
|
|
base_addr[CyTBPR] = baud_bpr[spd];
|
|
|
|
base_addr[CyRCOR] = baud_co[spd] >> 5;
|
|
|
|
base_addr[CyRBPR] = baud_bpr[spd];
|
|
|
|
base_addr[CySCHR1] = 'Q' & 0x1f;
|
|
|
|
base_addr[CySCHR2] = 'X' & 0x1f;
|
|
|
|
base_addr[CySCRL] = 0;
|
|
|
|
base_addr[CySCRH] = 0;
|
|
|
|
base_addr[CyCOR1] = Cy_8_BITS | CyPARITY_NONE;
|
|
|
|
base_addr[CyCOR2] = 0;
|
|
|
|
base_addr[CyCOR3] = Cy_1_STOP;
|
|
|
|
base_addr[CyCOR4] = baud_cor4[spd];
|
|
|
|
base_addr[CyCOR5] = 0;
|
|
|
|
base_addr[CyCOR6] = 0;
|
|
|
|
base_addr[CyCOR7] = 0;
|
|
|
|
base_addr[CyRTPRL] = 2;
|
|
|
|
base_addr[CyRTPRH] = 0;
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyMSVR1] = 0;
|
|
|
|
base_addr[CyMSVR2] = 0;
|
|
|
|
write_cy_cmd(base_addr, CyINIT_CHAN | CyDIS_RCVR | CyDIS_XMTR);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Now do specials for channel zero....
|
|
|
|
*/
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyMSVR1] = CyRTS;
|
|
|
|
base_addr[CyMSVR2] = CyDTR;
|
2005-04-17 06:20:36 +08:00
|
|
|
base_addr[CyIER] = CyRxData;
|
2007-02-10 17:45:08 +08:00
|
|
|
write_cy_cmd(base_addr, CyENB_RCVR | CyENB_XMTR);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
local_irq_restore(flags);
|
|
|
|
|
|
|
|
my_udelay(20000L); /* Let it all settle down */
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("CD2401 initialised, chip is rev 0x%02x\n", base_addr[CyGFRCR]);
|
2005-04-17 06:20:36 +08:00
|
|
|
if (badspeed)
|
2007-02-10 17:45:08 +08:00
|
|
|
printk
|
|
|
|
(" WARNING: Failed to identify line speed, rcor=%02x,rbpr=%02x\n",
|
|
|
|
rcor >> 5, rbpr);
|
|
|
|
} /* serial_console_init */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2006-10-02 17:17:18 +08:00
|
|
|
static const struct tty_operations cy_ops = {
|
2005-04-17 06:20:36 +08:00
|
|
|
.open = cy_open,
|
|
|
|
.close = cy_close,
|
|
|
|
.write = cy_write,
|
|
|
|
.put_char = cy_put_char,
|
|
|
|
.flush_chars = cy_flush_chars,
|
|
|
|
.write_room = cy_write_room,
|
|
|
|
.chars_in_buffer = cy_chars_in_buffer,
|
|
|
|
.flush_buffer = cy_flush_buffer,
|
|
|
|
.ioctl = cy_ioctl,
|
|
|
|
.throttle = cy_throttle,
|
|
|
|
.unthrottle = cy_unthrottle,
|
|
|
|
.set_termios = cy_set_termios,
|
|
|
|
.stop = cy_stop,
|
|
|
|
.start = cy_start,
|
|
|
|
.hangup = cy_hangup,
|
|
|
|
.tiocmget = cy_tiocmget,
|
|
|
|
.tiocmset = cy_tiocmset,
|
|
|
|
};
|
2007-02-10 17:45:08 +08:00
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
/* The serial driver boot-time initialization code!
|
|
|
|
Hardware I/O ports are mapped to character special devices on a
|
|
|
|
first found, first allocated manner. That is, this code searches
|
|
|
|
for Cyclom cards in the system. As each is found, it is probed
|
|
|
|
to discover how many chips (and thus how many ports) are present.
|
|
|
|
These ports are mapped to the tty ports 64 and upward in monotonic
|
|
|
|
fashion. If an 8-port card is replaced with a 16-port card, the
|
|
|
|
port mapping on a following card will shift.
|
|
|
|
|
|
|
|
This approach is different from what is used in the other serial
|
|
|
|
device driver because the Cyclom is more properly a multiplexer,
|
|
|
|
not just an aggregation of serial ports on one card.
|
|
|
|
|
|
|
|
If there are more cards with more ports than have been statically
|
|
|
|
allocated above, a warning is printed and the extra ports are ignored.
|
|
|
|
*/
|
2007-02-10 17:45:08 +08:00
|
|
|
static int __init serial167_init(void)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
struct cyclades_port *info;
|
|
|
|
int ret = 0;
|
|
|
|
int good_ports = 0;
|
|
|
|
int port_num = 0;
|
|
|
|
int index;
|
|
|
|
int DefSpeed;
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef notyet
|
2007-02-10 17:45:08 +08:00
|
|
|
struct sigaction sa;
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
if (!(mvme16x_config & MVME16x_CONFIG_GOT_CD2401))
|
|
|
|
return 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
cy_serial_driver = alloc_tty_driver(NR_PORTS);
|
|
|
|
if (!cy_serial_driver)
|
|
|
|
return -ENOMEM;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#if 0
|
2007-02-10 17:45:08 +08:00
|
|
|
scrn[1] = '\0';
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
show_version();
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
/* Has "console=0,9600n8" been used in bootinfo to change speed? */
|
|
|
|
if (serial_console_cflag)
|
|
|
|
DefSpeed = serial_console_cflag & 0017;
|
|
|
|
else {
|
|
|
|
DefSpeed = initial_console_speed;
|
|
|
|
serial_console_info = &cy_port[0];
|
|
|
|
serial_console_cflag = DefSpeed | CS8;
|
2005-04-17 06:20:36 +08:00
|
|
|
#if 0
|
2007-02-10 17:45:08 +08:00
|
|
|
serial_console = 64; /*callout_driver.minor_start */
|
|
|
|
#endif
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
/* Initialize the tty_driver structure */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
cy_serial_driver->owner = THIS_MODULE;
|
|
|
|
cy_serial_driver->name = "ttyS";
|
|
|
|
cy_serial_driver->major = TTY_MAJOR;
|
|
|
|
cy_serial_driver->minor_start = 64;
|
|
|
|
cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
|
|
|
|
cy_serial_driver->subtype = SERIAL_TYPE_NORMAL;
|
|
|
|
cy_serial_driver->init_termios = tty_std_termios;
|
|
|
|
cy_serial_driver->init_termios.c_cflag =
|
|
|
|
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
|
|
|
|
cy_serial_driver->flags = TTY_DRIVER_REAL_RAW;
|
|
|
|
tty_set_operations(cy_serial_driver, &cy_ops);
|
|
|
|
|
|
|
|
ret = tty_register_driver(cy_serial_driver);
|
|
|
|
if (ret) {
|
|
|
|
printk(KERN_ERR "Couldn't register MVME166/7 serial driver\n");
|
|
|
|
put_tty_driver(cy_serial_driver);
|
|
|
|
return ret;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
port_num = 0;
|
|
|
|
info = cy_port;
|
|
|
|
for (index = 0; index < 1; index++) {
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
good_ports = 4;
|
|
|
|
|
|
|
|
if (port_num < NR_PORTS) {
|
|
|
|
while (good_ports-- && port_num < NR_PORTS) {
|
2005-04-17 06:20:36 +08:00
|
|
|
/*** initialize port ***/
|
2007-02-10 17:45:08 +08:00
|
|
|
info->magic = CYCLADES_MAGIC;
|
|
|
|
info->type = PORT_CIRRUS;
|
|
|
|
info->card = index;
|
|
|
|
info->line = port_num;
|
|
|
|
info->flags = STD_COM_FLAGS;
|
|
|
|
info->tty = NULL;
|
|
|
|
info->xmit_fifo_size = 12;
|
|
|
|
info->cor1 = CyPARITY_NONE | Cy_8_BITS;
|
|
|
|
info->cor2 = CyETC;
|
|
|
|
info->cor3 = Cy_1_STOP;
|
|
|
|
info->cor4 = 0x08; /* _very_ small receive threshold */
|
|
|
|
info->cor5 = 0;
|
|
|
|
info->cor6 = 0;
|
|
|
|
info->cor7 = 0;
|
|
|
|
info->tbpr = baud_bpr[DefSpeed]; /* Tx BPR */
|
|
|
|
info->tco = baud_co[DefSpeed]; /* Tx CO */
|
|
|
|
info->rbpr = baud_bpr[DefSpeed]; /* Rx BPR */
|
|
|
|
info->rco = baud_co[DefSpeed] >> 5; /* Rx CO */
|
|
|
|
info->close_delay = 0;
|
|
|
|
info->x_char = 0;
|
|
|
|
info->count = 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef SERIAL_DEBUG_COUNT
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("cyc: %d: setting count to 0\n",
|
|
|
|
__LINE__);
|
|
|
|
#endif
|
|
|
|
info->blocked_open = 0;
|
|
|
|
info->default_threshold = 0;
|
|
|
|
info->default_timeout = 0;
|
|
|
|
init_waitqueue_head(&info->open_wait);
|
|
|
|
init_waitqueue_head(&info->close_wait);
|
|
|
|
/* info->session */
|
|
|
|
/* info->pgrp */
|
2005-04-17 06:20:36 +08:00
|
|
|
/*** !!!!!!!! this may expose new bugs !!!!!!!!! *********/
|
2007-02-10 17:45:08 +08:00
|
|
|
info->read_status_mask =
|
|
|
|
CyTIMEOUT | CySPECHAR | CyBREAK | CyPARITY |
|
|
|
|
CyFRAME | CyOVERRUN;
|
|
|
|
/* info->timeout */
|
|
|
|
|
|
|
|
printk("ttyS%d ", info->line);
|
|
|
|
port_num++;
|
|
|
|
info++;
|
|
|
|
if (!(port_num & 7)) {
|
|
|
|
printk("\n ");
|
|
|
|
}
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
2007-02-10 17:45:08 +08:00
|
|
|
printk("\n");
|
|
|
|
}
|
|
|
|
while (port_num < NR_PORTS) {
|
|
|
|
info->line = -1;
|
|
|
|
port_num++;
|
|
|
|
info++;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifdef CONFIG_REMOTE_DEBUG
|
2007-02-10 17:45:08 +08:00
|
|
|
debug_setup();
|
|
|
|
#endif
|
|
|
|
ret = request_irq(MVME167_IRQ_SER_ERR, cd2401_rxerr_interrupt, 0,
|
|
|
|
"cd2401_errors", cd2401_rxerr_interrupt);
|
|
|
|
if (ret) {
|
|
|
|
printk(KERN_ERR "Could't get cd2401_errors IRQ");
|
|
|
|
goto cleanup_serial_driver;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = request_irq(MVME167_IRQ_SER_MODEM, cd2401_modem_interrupt, 0,
|
|
|
|
"cd2401_modem", cd2401_modem_interrupt);
|
|
|
|
if (ret) {
|
|
|
|
printk(KERN_ERR "Could't get cd2401_modem IRQ");
|
|
|
|
goto cleanup_irq_cd2401_errors;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = request_irq(MVME167_IRQ_SER_TX, cd2401_tx_interrupt, 0,
|
|
|
|
"cd2401_txints", cd2401_tx_interrupt);
|
|
|
|
if (ret) {
|
|
|
|
printk(KERN_ERR "Could't get cd2401_txints IRQ");
|
|
|
|
goto cleanup_irq_cd2401_modem;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = request_irq(MVME167_IRQ_SER_RX, cd2401_rx_interrupt, 0,
|
|
|
|
"cd2401_rxints", cd2401_rx_interrupt);
|
|
|
|
if (ret) {
|
|
|
|
printk(KERN_ERR "Could't get cd2401_rxints IRQ");
|
|
|
|
goto cleanup_irq_cd2401_txints;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Now we have registered the interrupt handlers, allow the interrupts */
|
|
|
|
|
|
|
|
pcc2chip[PccSCCMICR] = 0x15; /* Serial ints are level 5 */
|
|
|
|
pcc2chip[PccSCCTICR] = 0x15;
|
|
|
|
pcc2chip[PccSCCRICR] = 0x15;
|
|
|
|
|
|
|
|
pcc2chip[PccIMLR] = 3; /* Allow PCC2 ints above 3!? */
|
|
|
|
|
|
|
|
return 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
cleanup_irq_cd2401_txints:
|
2007-02-10 17:45:08 +08:00
|
|
|
free_irq(MVME167_IRQ_SER_TX, cd2401_tx_interrupt);
|
2005-04-17 06:20:36 +08:00
|
|
|
cleanup_irq_cd2401_modem:
|
2007-02-10 17:45:08 +08:00
|
|
|
free_irq(MVME167_IRQ_SER_MODEM, cd2401_modem_interrupt);
|
2005-04-17 06:20:36 +08:00
|
|
|
cleanup_irq_cd2401_errors:
|
2007-02-10 17:45:08 +08:00
|
|
|
free_irq(MVME167_IRQ_SER_ERR, cd2401_rxerr_interrupt);
|
2005-04-17 06:20:36 +08:00
|
|
|
cleanup_serial_driver:
|
2007-02-10 17:45:08 +08:00
|
|
|
if (tty_unregister_driver(cy_serial_driver))
|
|
|
|
printk(KERN_ERR
|
|
|
|
"Couldn't unregister MVME166/7 serial driver\n");
|
|
|
|
put_tty_driver(cy_serial_driver);
|
|
|
|
return ret;
|
|
|
|
} /* serial167_init */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
module_init(serial167_init);
|
|
|
|
|
|
|
|
#ifdef CYCLOM_SHOW_STATUS
|
2007-02-10 17:45:08 +08:00
|
|
|
static void show_status(int line_num)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
|
|
|
|
int channel;
|
|
|
|
struct cyclades_port *info;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
info = &cy_port[line_num];
|
|
|
|
channel = info->line;
|
|
|
|
printk(" channel %d\n", channel);
|
|
|
|
/**/ printk(" cy_port\n");
|
|
|
|
printk(" card line flags = %d %d %x\n",
|
|
|
|
info->card, info->line, info->flags);
|
|
|
|
printk
|
|
|
|
(" *tty read_status_mask timeout xmit_fifo_size = %lx %x %x %x\n",
|
|
|
|
(long)info->tty, info->read_status_mask, info->timeout,
|
|
|
|
info->xmit_fifo_size);
|
|
|
|
printk(" cor1,cor2,cor3,cor4,cor5,cor6,cor7 = %x %x %x %x %x %x %x\n",
|
|
|
|
info->cor1, info->cor2, info->cor3, info->cor4, info->cor5,
|
|
|
|
info->cor6, info->cor7);
|
|
|
|
printk(" tbpr,tco,rbpr,rco = %d %d %d %d\n", info->tbpr, info->tco,
|
|
|
|
info->rbpr, info->rco);
|
|
|
|
printk(" close_delay event count = %d %d %d\n", info->close_delay,
|
|
|
|
info->event, info->count);
|
|
|
|
printk(" x_char blocked_open = %x %x\n", info->x_char,
|
|
|
|
info->blocked_open);
|
|
|
|
printk(" open_wait = %lx %lx %lx\n", (long)info->open_wait);
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/* Global Registers */
|
|
|
|
|
|
|
|
printk(" CyGFRCR %x\n", base_addr[CyGFRCR]);
|
|
|
|
printk(" CyCAR %x\n", base_addr[CyCAR]);
|
|
|
|
printk(" CyRISR %x\n", base_addr[CyRISR]);
|
|
|
|
printk(" CyTISR %x\n", base_addr[CyTISR]);
|
|
|
|
printk(" CyMISR %x\n", base_addr[CyMISR]);
|
|
|
|
printk(" CyRIR %x\n", base_addr[CyRIR]);
|
|
|
|
printk(" CyTIR %x\n", base_addr[CyTIR]);
|
|
|
|
printk(" CyMIR %x\n", base_addr[CyMIR]);
|
|
|
|
printk(" CyTPR %x\n", base_addr[CyTPR]);
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyCAR] = (u_char) channel;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/* Virtual Registers */
|
|
|
|
|
|
|
|
#if 0
|
|
|
|
printk(" CyRIVR %x\n", base_addr[CyRIVR]);
|
|
|
|
printk(" CyTIVR %x\n", base_addr[CyTIVR]);
|
|
|
|
printk(" CyMIVR %x\n", base_addr[CyMIVR]);
|
|
|
|
printk(" CyMISR %x\n", base_addr[CyMISR]);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/* Channel Registers */
|
|
|
|
|
|
|
|
printk(" CyCCR %x\n", base_addr[CyCCR]);
|
|
|
|
printk(" CyIER %x\n", base_addr[CyIER]);
|
|
|
|
printk(" CyCOR1 %x\n", base_addr[CyCOR1]);
|
|
|
|
printk(" CyCOR2 %x\n", base_addr[CyCOR2]);
|
|
|
|
printk(" CyCOR3 %x\n", base_addr[CyCOR3]);
|
|
|
|
printk(" CyCOR4 %x\n", base_addr[CyCOR4]);
|
|
|
|
printk(" CyCOR5 %x\n", base_addr[CyCOR5]);
|
|
|
|
#if 0
|
|
|
|
printk(" CyCCSR %x\n", base_addr[CyCCSR]);
|
|
|
|
printk(" CyRDCR %x\n", base_addr[CyRDCR]);
|
|
|
|
#endif
|
|
|
|
printk(" CySCHR1 %x\n", base_addr[CySCHR1]);
|
|
|
|
printk(" CySCHR2 %x\n", base_addr[CySCHR2]);
|
|
|
|
#if 0
|
|
|
|
printk(" CySCHR3 %x\n", base_addr[CySCHR3]);
|
|
|
|
printk(" CySCHR4 %x\n", base_addr[CySCHR4]);
|
|
|
|
printk(" CySCRL %x\n", base_addr[CySCRL]);
|
|
|
|
printk(" CySCRH %x\n", base_addr[CySCRH]);
|
|
|
|
printk(" CyLNC %x\n", base_addr[CyLNC]);
|
|
|
|
printk(" CyMCOR1 %x\n", base_addr[CyMCOR1]);
|
|
|
|
printk(" CyMCOR2 %x\n", base_addr[CyMCOR2]);
|
|
|
|
#endif
|
|
|
|
printk(" CyRTPRL %x\n", base_addr[CyRTPRL]);
|
|
|
|
printk(" CyRTPRH %x\n", base_addr[CyRTPRH]);
|
|
|
|
printk(" CyMSVR1 %x\n", base_addr[CyMSVR1]);
|
|
|
|
printk(" CyMSVR2 %x\n", base_addr[CyMSVR2]);
|
|
|
|
printk(" CyRBPR %x\n", base_addr[CyRBPR]);
|
|
|
|
printk(" CyRCOR %x\n", base_addr[CyRCOR]);
|
|
|
|
printk(" CyTBPR %x\n", base_addr[CyTBPR]);
|
|
|
|
printk(" CyTCOR %x\n", base_addr[CyTCOR]);
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_restore(flags);
|
|
|
|
} /* show_status */
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
|
|
|
|
|
|
|
#if 0
|
|
|
|
/* Dummy routine in mvme16x/config.c for now */
|
|
|
|
|
|
|
|
/* Serial console setup. Called from linux/init/main.c */
|
|
|
|
|
|
|
|
void console_setup(char *str, int *ints)
|
|
|
|
{
|
|
|
|
char *s;
|
|
|
|
int baud, bits, parity;
|
|
|
|
int cflag = 0;
|
|
|
|
|
|
|
|
/* Sanity check. */
|
2007-02-10 17:45:08 +08:00
|
|
|
if (ints[0] > 3 || ints[1] > 3)
|
|
|
|
return;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/* Get baud, bits and parity */
|
|
|
|
baud = 2400;
|
|
|
|
bits = 8;
|
|
|
|
parity = 'n';
|
2007-02-10 17:45:08 +08:00
|
|
|
if (ints[2])
|
|
|
|
baud = ints[2];
|
2005-04-17 06:20:36 +08:00
|
|
|
if ((s = strchr(str, ','))) {
|
|
|
|
do {
|
|
|
|
s++;
|
2007-02-10 17:45:08 +08:00
|
|
|
} while (*s >= '0' && *s <= '9');
|
|
|
|
if (*s)
|
|
|
|
parity = *s++;
|
|
|
|
if (*s)
|
|
|
|
bits = *s - '0';
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Now construct a cflag setting. */
|
2007-02-10 17:45:08 +08:00
|
|
|
switch (baud) {
|
|
|
|
case 1200:
|
|
|
|
cflag |= B1200;
|
|
|
|
break;
|
|
|
|
case 9600:
|
|
|
|
cflag |= B9600;
|
|
|
|
break;
|
|
|
|
case 19200:
|
|
|
|
cflag |= B19200;
|
|
|
|
break;
|
|
|
|
case 38400:
|
|
|
|
cflag |= B38400;
|
|
|
|
break;
|
|
|
|
case 2400:
|
|
|
|
default:
|
|
|
|
cflag |= B2400;
|
|
|
|
break;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
2007-02-10 17:45:08 +08:00
|
|
|
switch (bits) {
|
|
|
|
case 7:
|
|
|
|
cflag |= CS7;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
case 8:
|
|
|
|
cflag |= CS8;
|
|
|
|
break;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
2007-02-10 17:45:08 +08:00
|
|
|
switch (parity) {
|
|
|
|
case 'o':
|
|
|
|
case 'O':
|
|
|
|
cflag |= PARODD;
|
|
|
|
break;
|
|
|
|
case 'e':
|
|
|
|
case 'E':
|
|
|
|
cflag |= PARENB;
|
|
|
|
break;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
serial_console_info = &cy_port[ints[1]];
|
|
|
|
serial_console_cflag = cflag;
|
2007-02-10 17:45:08 +08:00
|
|
|
serial_console = ints[1] + 64; /*callout_driver.minor_start */
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The following is probably out of date for 2.1.x serial console stuff.
|
|
|
|
*
|
|
|
|
* The console is registered early on from arch/m68k/kernel/setup.c, and
|
|
|
|
* it therefore relies on the chip being setup correctly by 166-Bug. This
|
|
|
|
* seems reasonable, as the serial port has been used to invoke the system
|
|
|
|
* boot. It also means that this function must not rely on any data
|
|
|
|
* initialisation performed by serial167_init() etc.
|
|
|
|
*
|
|
|
|
* Of course, once the console has been registered, we had better ensure
|
|
|
|
* that serial167_init() doesn't leave the chip non-functional.
|
|
|
|
*
|
|
|
|
* The console must be locked when we get here.
|
|
|
|
*/
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
void serial167_console_write(struct console *co, const char *str,
|
|
|
|
unsigned count)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
|
2005-04-17 06:20:36 +08:00
|
|
|
unsigned long flags;
|
|
|
|
volatile u_char sink;
|
|
|
|
u_char ier;
|
|
|
|
int port;
|
|
|
|
u_char do_lf = 0;
|
|
|
|
int i = 0;
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
|
|
|
|
/* Ensure transmitter is enabled! */
|
|
|
|
|
|
|
|
port = 0;
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyCAR] = (u_char) port;
|
2005-04-17 06:20:36 +08:00
|
|
|
while (base_addr[CyCCR])
|
|
|
|
;
|
|
|
|
base_addr[CyCCR] = CyENB_XMTR;
|
|
|
|
|
|
|
|
ier = base_addr[CyIER];
|
|
|
|
base_addr[CyIER] = CyTxMpty;
|
|
|
|
|
|
|
|
while (1) {
|
2007-02-10 17:45:08 +08:00
|
|
|
if (pcc2chip[PccSCCTICR] & 0x20) {
|
2005-04-17 06:20:36 +08:00
|
|
|
/* We have a Tx int. Acknowledge it */
|
|
|
|
sink = pcc2chip[PccTPIACKR];
|
|
|
|
if ((base_addr[CyLICR] >> 2) == port) {
|
|
|
|
if (i == count) {
|
|
|
|
/* Last char of string is now output */
|
|
|
|
base_addr[CyTEOIR] = CyNOTRANS;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (do_lf) {
|
|
|
|
base_addr[CyTDR] = '\n';
|
|
|
|
str++;
|
|
|
|
i++;
|
|
|
|
do_lf = 0;
|
2007-02-10 17:45:08 +08:00
|
|
|
} else if (*str == '\n') {
|
2005-04-17 06:20:36 +08:00
|
|
|
base_addr[CyTDR] = '\r';
|
|
|
|
do_lf = 1;
|
2007-02-10 17:45:08 +08:00
|
|
|
} else {
|
2005-04-17 06:20:36 +08:00
|
|
|
base_addr[CyTDR] = *str++;
|
|
|
|
i++;
|
|
|
|
}
|
|
|
|
base_addr[CyTEOIR] = 0;
|
2007-02-10 17:45:08 +08:00
|
|
|
} else
|
2005-04-17 06:20:36 +08:00
|
|
|
base_addr[CyTEOIR] = CyNOTRANS;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
base_addr[CyIER] = ier;
|
|
|
|
|
|
|
|
local_irq_restore(flags);
|
|
|
|
}
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
static struct tty_driver *serial167_console_device(struct console *c,
|
|
|
|
int *index)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
*index = c->index;
|
|
|
|
return cy_serial_driver;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct console sercons = {
|
2007-02-10 17:45:08 +08:00
|
|
|
.name = "ttyS",
|
|
|
|
.write = serial167_console_write,
|
|
|
|
.device = serial167_console_device,
|
|
|
|
.flags = CON_PRINTBUFFER,
|
|
|
|
.index = -1,
|
2005-04-17 06:20:36 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static int __init serial167_console_init(void)
|
|
|
|
{
|
|
|
|
if (vme_brdtype == VME_TYPE_MVME166 ||
|
2007-02-10 17:45:08 +08:00
|
|
|
vme_brdtype == VME_TYPE_MVME167 ||
|
|
|
|
vme_brdtype == VME_TYPE_MVME177) {
|
2005-04-17 06:20:36 +08:00
|
|
|
mvme167_serial_console_setup(0);
|
|
|
|
register_console(&sercons);
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
2007-02-10 17:45:08 +08:00
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
console_initcall(serial167_console_init);
|
|
|
|
|
|
|
|
#ifdef CONFIG_REMOTE_DEBUG
|
2007-02-10 17:45:08 +08:00
|
|
|
void putDebugChar(int c)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
|
2005-04-17 06:20:36 +08:00
|
|
|
unsigned long flags;
|
|
|
|
volatile u_char sink;
|
|
|
|
u_char ier;
|
|
|
|
int port;
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
|
|
|
|
/* Ensure transmitter is enabled! */
|
|
|
|
|
|
|
|
port = DEBUG_PORT;
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyCAR] = (u_char) port;
|
2005-04-17 06:20:36 +08:00
|
|
|
while (base_addr[CyCCR])
|
|
|
|
;
|
|
|
|
base_addr[CyCCR] = CyENB_XMTR;
|
|
|
|
|
|
|
|
ier = base_addr[CyIER];
|
|
|
|
base_addr[CyIER] = CyTxMpty;
|
|
|
|
|
|
|
|
while (1) {
|
2007-02-10 17:45:08 +08:00
|
|
|
if (pcc2chip[PccSCCTICR] & 0x20) {
|
2005-04-17 06:20:36 +08:00
|
|
|
/* We have a Tx int. Acknowledge it */
|
|
|
|
sink = pcc2chip[PccTPIACKR];
|
|
|
|
if ((base_addr[CyLICR] >> 2) == port) {
|
|
|
|
base_addr[CyTDR] = c;
|
|
|
|
base_addr[CyTEOIR] = 0;
|
|
|
|
break;
|
2007-02-10 17:45:08 +08:00
|
|
|
} else
|
2005-04-17 06:20:36 +08:00
|
|
|
base_addr[CyTEOIR] = CyNOTRANS;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
base_addr[CyIER] = ier;
|
|
|
|
|
|
|
|
local_irq_restore(flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
int getDebugChar()
|
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
|
2005-04-17 06:20:36 +08:00
|
|
|
unsigned long flags;
|
|
|
|
volatile u_char sink;
|
|
|
|
u_char ier;
|
|
|
|
int port;
|
|
|
|
int i, c;
|
|
|
|
|
|
|
|
i = debugiq.out;
|
|
|
|
if (i != debugiq.in) {
|
|
|
|
c = debugiq.buf[i];
|
|
|
|
if (++i == DEBUG_LEN)
|
|
|
|
i = 0;
|
|
|
|
debugiq.out = i;
|
|
|
|
return c;
|
|
|
|
}
|
|
|
|
/* OK, nothing in queue, wait in poll loop */
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
|
|
|
|
/* Ensure receiver is enabled! */
|
|
|
|
|
|
|
|
port = DEBUG_PORT;
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyCAR] = (u_char) port;
|
2005-04-17 06:20:36 +08:00
|
|
|
#if 0
|
|
|
|
while (base_addr[CyCCR])
|
|
|
|
;
|
|
|
|
base_addr[CyCCR] = CyENB_RCVR;
|
|
|
|
#endif
|
|
|
|
ier = base_addr[CyIER];
|
|
|
|
base_addr[CyIER] = CyRxData;
|
|
|
|
|
|
|
|
while (1) {
|
2007-02-10 17:45:08 +08:00
|
|
|
if (pcc2chip[PccSCCRICR] & 0x20) {
|
2005-04-17 06:20:36 +08:00
|
|
|
/* We have a Rx int. Acknowledge it */
|
|
|
|
sink = pcc2chip[PccRPIACKR];
|
|
|
|
if ((base_addr[CyLICR] >> 2) == port) {
|
|
|
|
int cnt = base_addr[CyRFOC];
|
2007-02-10 17:45:08 +08:00
|
|
|
while (cnt-- > 0) {
|
2005-04-17 06:20:36 +08:00
|
|
|
c = base_addr[CyRDR];
|
|
|
|
if (c == 0)
|
2007-02-10 17:45:08 +08:00
|
|
|
printk
|
|
|
|
("!! debug char is null (cnt=%d) !!",
|
|
|
|
cnt);
|
2005-04-17 06:20:36 +08:00
|
|
|
else
|
2007-02-10 17:45:08 +08:00
|
|
|
queueDebugChar(c);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
base_addr[CyREOIR] = 0;
|
|
|
|
i = debugiq.out;
|
|
|
|
if (i == debugiq.in)
|
2007-02-10 17:45:08 +08:00
|
|
|
panic("Debug input queue empty!");
|
2005-04-17 06:20:36 +08:00
|
|
|
c = debugiq.buf[i];
|
|
|
|
if (++i == DEBUG_LEN)
|
|
|
|
i = 0;
|
|
|
|
debugiq.out = i;
|
|
|
|
break;
|
2007-02-10 17:45:08 +08:00
|
|
|
} else
|
2005-04-17 06:20:36 +08:00
|
|
|
base_addr[CyREOIR] = CyNOTRANS;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
base_addr[CyIER] = ier;
|
|
|
|
|
|
|
|
local_irq_restore(flags);
|
|
|
|
|
|
|
|
return (c);
|
|
|
|
}
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
void queueDebugChar(int c)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
i = debugiq.in;
|
|
|
|
debugiq.buf[i] = c;
|
|
|
|
if (++i == DEBUG_LEN)
|
|
|
|
i = 0;
|
|
|
|
if (i != debugiq.out)
|
|
|
|
debugiq.in = i;
|
|
|
|
}
|
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
static void debug_setup()
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2007-02-10 17:45:08 +08:00
|
|
|
unsigned long flags;
|
|
|
|
volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
|
|
|
|
int i, cflag;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
cflag = B19200;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_save(flags);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
for (i = 0; i < 4; i++) {
|
|
|
|
base_addr[CyCAR] = i;
|
|
|
|
base_addr[CyLICR] = i << 2;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
debugiq.in = debugiq.out = 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyCAR] = DEBUG_PORT;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
/* baud rate */
|
|
|
|
i = cflag & CBAUD;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyIER] = 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyCMR] = CyASYNC;
|
|
|
|
base_addr[CyLICR] = DEBUG_PORT << 2;
|
|
|
|
base_addr[CyLIVR] = 0x5c;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
/* tx and rx baud rate */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyTCOR] = baud_co[i];
|
|
|
|
base_addr[CyTBPR] = baud_bpr[i];
|
|
|
|
base_addr[CyRCOR] = baud_co[i] >> 5;
|
|
|
|
base_addr[CyRBPR] = baud_bpr[i];
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
/* set line characteristics according configuration */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CySCHR1] = 0;
|
|
|
|
base_addr[CySCHR2] = 0;
|
|
|
|
base_addr[CySCRL] = 0;
|
|
|
|
base_addr[CySCRH] = 0;
|
|
|
|
base_addr[CyCOR1] = Cy_8_BITS | CyPARITY_NONE;
|
|
|
|
base_addr[CyCOR2] = 0;
|
|
|
|
base_addr[CyCOR3] = Cy_1_STOP;
|
|
|
|
base_addr[CyCOR4] = baud_cor4[i];
|
|
|
|
base_addr[CyCOR5] = 0;
|
|
|
|
base_addr[CyCOR6] = 0;
|
|
|
|
base_addr[CyCOR7] = 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
write_cy_cmd(base_addr, CyINIT_CHAN);
|
|
|
|
write_cy_cmd(base_addr, CyENB_RCVR);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyCAR] = DEBUG_PORT; /* !!! Is this needed? */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyRTPRL] = 2;
|
|
|
|
base_addr[CyRTPRH] = 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyMSVR1] = CyRTS;
|
|
|
|
base_addr[CyMSVR2] = CyDTR;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
base_addr[CyIER] = CyRxData;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
local_irq_restore(flags);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-10 17:45:08 +08:00
|
|
|
} /* debug_setup */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
MODULE_LICENSE("GPL");
|