OpenCloudOS-Kernel/arch/powerpc/kernel/hw_breakpoint.c

782 lines
17 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* HW_breakpoint: a unified kernel/user-space hardware breakpoint facility,
* using the CPU's debug registers. Derived from
* "arch/x86/kernel/hw_breakpoint.c"
*
* Copyright 2010 IBM Corporation
* Author: K.Prasad <prasad@linux.vnet.ibm.com>
*/
#include <linux/hw_breakpoint.h>
#include <linux/notifier.h>
#include <linux/kprobes.h>
#include <linux/percpu.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/smp.h>
powerpc: Add force enable of DAWR on P9 option This adds a flag so that the DAWR can be enabled on P9 via: echo Y > /sys/kernel/debug/powerpc/dawr_enable_dangerous The DAWR was previously force disabled on POWER9 in: 9654153158 powerpc: Disable DAWR in the base POWER9 CPU features Also see Documentation/powerpc/DAWR-POWER9.txt This is a dangerous setting, USE AT YOUR OWN RISK. Some users may not care about a bad user crashing their box (ie. single user/desktop systems) and really want the DAWR. This allows them to force enable DAWR. This flag can also be used to disable DAWR access. Once this is cleared, all DAWR access should be cleared immediately and your machine once again safe from crashing. Userspace may get confused by toggling this. If DAWR is force enabled/disabled between getting the number of breakpoints (via PTRACE_GETHWDBGINFO) and setting the breakpoint, userspace will get an inconsistent view of what's available. Similarly for guests. For the DAWR to be enabled in a KVM guest, the DAWR needs to be force enabled in the host AND the guest. For this reason, this won't work on POWERVM as it doesn't allow the HCALL to work. Writes of 'Y' to the dawr_enable_dangerous file will fail if the hypervisor doesn't support writing the DAWR. To double check the DAWR is working, run this kernel selftest: tools/testing/selftests/powerpc/ptrace/ptrace-hwbreak.c Any errors/failures/skips mean something is wrong. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-01 14:03:12 +08:00
#include <linux/debugfs.h>
#include <linux/init.h>
#include <asm/hw_breakpoint.h>
#include <asm/processor.h>
#include <asm/sstep.h>
#include <asm/debug.h>
powerpc: Add force enable of DAWR on P9 option This adds a flag so that the DAWR can be enabled on P9 via: echo Y > /sys/kernel/debug/powerpc/dawr_enable_dangerous The DAWR was previously force disabled on POWER9 in: 9654153158 powerpc: Disable DAWR in the base POWER9 CPU features Also see Documentation/powerpc/DAWR-POWER9.txt This is a dangerous setting, USE AT YOUR OWN RISK. Some users may not care about a bad user crashing their box (ie. single user/desktop systems) and really want the DAWR. This allows them to force enable DAWR. This flag can also be used to disable DAWR access. Once this is cleared, all DAWR access should be cleared immediately and your machine once again safe from crashing. Userspace may get confused by toggling this. If DAWR is force enabled/disabled between getting the number of breakpoints (via PTRACE_GETHWDBGINFO) and setting the breakpoint, userspace will get an inconsistent view of what's available. Similarly for guests. For the DAWR to be enabled in a KVM guest, the DAWR needs to be force enabled in the host AND the guest. For this reason, this won't work on POWERVM as it doesn't allow the HCALL to work. Writes of 'Y' to the dawr_enable_dangerous file will fail if the hypervisor doesn't support writing the DAWR. To double check the DAWR is working, run this kernel selftest: tools/testing/selftests/powerpc/ptrace/ptrace-hwbreak.c Any errors/failures/skips mean something is wrong. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-01 14:03:12 +08:00
#include <asm/debugfs.h>
#include <asm/hvcall.h>
#include <asm/inst.h>
#include <linux/uaccess.h>
/*
* Stores the breakpoints currently in use on each breakpoint address
* register for every cpu
*/
static DEFINE_PER_CPU(struct perf_event *, bp_per_reg[HBP_NUM_MAX]);
/*
* Returns total number of data or instruction breakpoints available.
*/
int hw_breakpoint_slots(int type)
{
if (type == TYPE_DATA)
return nr_wp_slots();
return 0; /* no instruction breakpoints available */
}
static bool single_step_pending(void)
{
int i;
for (i = 0; i < nr_wp_slots(); i++) {
if (current->thread.last_hit_ubp[i])
return true;
}
return false;
}
/*
* Install a perf counter breakpoint.
*
* We seek a free debug address register and use it for this
* breakpoint.
*
* Atomic: we hold the counter->ctx->lock and we only handle variables
* and registers local to this cpu.
*/
int arch_install_hw_breakpoint(struct perf_event *bp)
{
struct arch_hw_breakpoint *info = counter_arch_bp(bp);
struct perf_event **slot;
int i;
for (i = 0; i < nr_wp_slots(); i++) {
slot = this_cpu_ptr(&bp_per_reg[i]);
if (!*slot) {
*slot = bp;
break;
}
}
if (WARN_ONCE(i == nr_wp_slots(), "Can't find any breakpoint slot"))
return -EBUSY;
/*
* Do not install DABR values if the instruction must be single-stepped.
* If so, DABR will be populated in single_step_dabr_instruction().
*/
if (!single_step_pending())
__set_breakpoint(i, info);
return 0;
}
/*
* Uninstall the breakpoint contained in the given counter.
*
* First we search the debug address register it uses and then we disable
* it.
*
* Atomic: we hold the counter->ctx->lock and we only handle variables
* and registers local to this cpu.
*/
void arch_uninstall_hw_breakpoint(struct perf_event *bp)
{
struct arch_hw_breakpoint null_brk = {0};
struct perf_event **slot;
int i;
for (i = 0; i < nr_wp_slots(); i++) {
slot = this_cpu_ptr(&bp_per_reg[i]);
if (*slot == bp) {
*slot = NULL;
break;
}
}
if (WARN_ONCE(i == nr_wp_slots(), "Can't find any breakpoint slot"))
return;
__set_breakpoint(i, &null_brk);
}
static bool is_ptrace_bp(struct perf_event *bp)
{
return bp->overflow_handler == ptrace_triggered;
}
struct breakpoint {
struct list_head list;
struct perf_event *bp;
bool ptrace_bp;
};
static DEFINE_PER_CPU(struct breakpoint *, cpu_bps[HBP_NUM_MAX]);
static LIST_HEAD(task_bps);
static struct breakpoint *alloc_breakpoint(struct perf_event *bp)
{
struct breakpoint *tmp;
tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
if (!tmp)
return ERR_PTR(-ENOMEM);
tmp->bp = bp;
tmp->ptrace_bp = is_ptrace_bp(bp);
return tmp;
}
static bool bp_addr_range_overlap(struct perf_event *bp1, struct perf_event *bp2)
{
__u64 bp1_saddr, bp1_eaddr, bp2_saddr, bp2_eaddr;
bp1_saddr = ALIGN_DOWN(bp1->attr.bp_addr, HW_BREAKPOINT_SIZE);
bp1_eaddr = ALIGN(bp1->attr.bp_addr + bp1->attr.bp_len, HW_BREAKPOINT_SIZE);
bp2_saddr = ALIGN_DOWN(bp2->attr.bp_addr, HW_BREAKPOINT_SIZE);
bp2_eaddr = ALIGN(bp2->attr.bp_addr + bp2->attr.bp_len, HW_BREAKPOINT_SIZE);
return (bp1_saddr < bp2_eaddr && bp1_eaddr > bp2_saddr);
}
static bool alternate_infra_bp(struct breakpoint *b, struct perf_event *bp)
{
return is_ptrace_bp(bp) ? !b->ptrace_bp : b->ptrace_bp;
}
static bool can_co_exist(struct breakpoint *b, struct perf_event *bp)
{
return !(alternate_infra_bp(b, bp) && bp_addr_range_overlap(b->bp, bp));
}
static int task_bps_add(struct perf_event *bp)
{
struct breakpoint *tmp;
tmp = alloc_breakpoint(bp);
if (IS_ERR(tmp))
return PTR_ERR(tmp);
list_add(&tmp->list, &task_bps);
return 0;
}
static void task_bps_remove(struct perf_event *bp)
{
struct list_head *pos, *q;
list_for_each_safe(pos, q, &task_bps) {
struct breakpoint *tmp = list_entry(pos, struct breakpoint, list);
if (tmp->bp == bp) {
list_del(&tmp->list);
kfree(tmp);
break;
}
}
}
/*
* If any task has breakpoint from alternate infrastructure,
* return true. Otherwise return false.
*/
static bool all_task_bps_check(struct perf_event *bp)
{
struct breakpoint *tmp;
list_for_each_entry(tmp, &task_bps, list) {
if (!can_co_exist(tmp, bp))
return true;
}
return false;
}
/*
* If same task has breakpoint from alternate infrastructure,
* return true. Otherwise return false.
*/
static bool same_task_bps_check(struct perf_event *bp)
{
struct breakpoint *tmp;
list_for_each_entry(tmp, &task_bps, list) {
if (tmp->bp->hw.target == bp->hw.target &&
!can_co_exist(tmp, bp))
return true;
}
return false;
}
static int cpu_bps_add(struct perf_event *bp)
{
struct breakpoint **cpu_bp;
struct breakpoint *tmp;
int i = 0;
tmp = alloc_breakpoint(bp);
if (IS_ERR(tmp))
return PTR_ERR(tmp);
cpu_bp = per_cpu_ptr(cpu_bps, bp->cpu);
for (i = 0; i < nr_wp_slots(); i++) {
if (!cpu_bp[i]) {
cpu_bp[i] = tmp;
break;
}
}
return 0;
}
static void cpu_bps_remove(struct perf_event *bp)
{
struct breakpoint **cpu_bp;
int i = 0;
cpu_bp = per_cpu_ptr(cpu_bps, bp->cpu);
for (i = 0; i < nr_wp_slots(); i++) {
if (!cpu_bp[i])
continue;
if (cpu_bp[i]->bp == bp) {
kfree(cpu_bp[i]);
cpu_bp[i] = NULL;
break;
}
}
}
static bool cpu_bps_check(int cpu, struct perf_event *bp)
{
struct breakpoint **cpu_bp;
int i;
cpu_bp = per_cpu_ptr(cpu_bps, cpu);
for (i = 0; i < nr_wp_slots(); i++) {
if (cpu_bp[i] && !can_co_exist(cpu_bp[i], bp))
return true;
}
return false;
}
static bool all_cpu_bps_check(struct perf_event *bp)
{
int cpu;
for_each_online_cpu(cpu) {
if (cpu_bps_check(cpu, bp))
return true;
}
return false;
}
/*
* We don't use any locks to serialize accesses to cpu_bps or task_bps
* because are already inside nr_bp_mutex.
*/
int arch_reserve_bp_slot(struct perf_event *bp)
{
int ret;
/* ptrace breakpoint */
if (is_ptrace_bp(bp)) {
if (all_cpu_bps_check(bp))
return -ENOSPC;
if (same_task_bps_check(bp))
return -ENOSPC;
return task_bps_add(bp);
}
/* perf breakpoint */
if (is_kernel_addr(bp->attr.bp_addr))
return 0;
if (bp->hw.target && bp->cpu == -1) {
if (same_task_bps_check(bp))
return -ENOSPC;
return task_bps_add(bp);
} else if (!bp->hw.target && bp->cpu != -1) {
if (all_task_bps_check(bp))
return -ENOSPC;
return cpu_bps_add(bp);
}
if (same_task_bps_check(bp))
return -ENOSPC;
ret = cpu_bps_add(bp);
if (ret)
return ret;
ret = task_bps_add(bp);
if (ret)
cpu_bps_remove(bp);
return ret;
}
void arch_release_bp_slot(struct perf_event *bp)
{
if (!is_kernel_addr(bp->attr.bp_addr)) {
if (bp->hw.target)
task_bps_remove(bp);
if (bp->cpu != -1)
cpu_bps_remove(bp);
}
}
/*
* Perform cleanup of arch-specific counters during unregistration
* of the perf-event
*/
void arch_unregister_hw_breakpoint(struct perf_event *bp)
{
/*
* If the breakpoint is unregistered between a hw_breakpoint_handler()
* and the single_step_dabr_instruction(), then cleanup the breakpoint
* restoration variables to prevent dangling pointers.
* FIXME, this should not be using bp->ctx at all! Sayeth peterz.
*/
if (bp->ctx && bp->ctx->task && bp->ctx->task != ((void *)-1L)) {
int i;
for (i = 0; i < nr_wp_slots(); i++) {
if (bp->ctx->task->thread.last_hit_ubp[i] == bp)
bp->ctx->task->thread.last_hit_ubp[i] = NULL;
}
}
}
/*
* Check for virtual address in kernel space.
*/
int arch_check_bp_in_kernelspace(struct arch_hw_breakpoint *hw)
{
return is_kernel_addr(hw->address);
}
int arch_bp_generic_fields(int type, int *gen_bp_type)
{
*gen_bp_type = 0;
if (type & HW_BRK_TYPE_READ)
*gen_bp_type |= HW_BREAKPOINT_R;
if (type & HW_BRK_TYPE_WRITE)
*gen_bp_type |= HW_BREAKPOINT_W;
if (*gen_bp_type == 0)
return -EINVAL;
return 0;
}
/*
* Watchpoint match range is always doubleword(8 bytes) aligned on
* powerpc. If the given range is crossing doubleword boundary, we
* need to increase the length such that next doubleword also get
* covered. Ex,
*
* address len = 6 bytes
* |=========.
* |------------v--|------v--------|
* | | | | | | | | | | | | | | | | |
* |---------------|---------------|
* <---8 bytes--->
*
* In this case, we should configure hw as:
* start_addr = address & ~(HW_BREAKPOINT_SIZE - 1)
* len = 16 bytes
*
* @start_addr is inclusive but @end_addr is exclusive.
*/
static int hw_breakpoint_validate_len(struct arch_hw_breakpoint *hw)
{
u16 max_len = DABR_MAX_LEN;
u16 hw_len;
unsigned long start_addr, end_addr;
start_addr = ALIGN_DOWN(hw->address, HW_BREAKPOINT_SIZE);
end_addr = ALIGN(hw->address + hw->len, HW_BREAKPOINT_SIZE);
hw_len = end_addr - start_addr;
if (dawr_enabled()) {
max_len = DAWR_MAX_LEN;
/* DAWR region can't cross 512 bytes boundary on p10 predecessors */
if (!cpu_has_feature(CPU_FTR_ARCH_31) &&
(ALIGN_DOWN(start_addr, SZ_512) != ALIGN_DOWN(end_addr - 1, SZ_512)))
return -EINVAL;
} else if (IS_ENABLED(CONFIG_PPC_8xx)) {
/* 8xx can setup a range without limitation */
max_len = U16_MAX;
}
if (hw_len > max_len)
return -EINVAL;
hw->hw_len = hw_len;
return 0;
}
/*
* Validate the arch-specific HW Breakpoint register settings
*/
int hw_breakpoint_arch_parse(struct perf_event *bp,
const struct perf_event_attr *attr,
struct arch_hw_breakpoint *hw)
{
int ret = -EINVAL;
if (!bp || !attr->bp_len)
return ret;
hw->type = HW_BRK_TYPE_TRANSLATE;
if (attr->bp_type & HW_BREAKPOINT_R)
hw->type |= HW_BRK_TYPE_READ;
if (attr->bp_type & HW_BREAKPOINT_W)
hw->type |= HW_BRK_TYPE_WRITE;
if (hw->type == HW_BRK_TYPE_TRANSLATE)
/* must set alteast read or write */
return ret;
if (!attr->exclude_user)
hw->type |= HW_BRK_TYPE_USER;
if (!attr->exclude_kernel)
hw->type |= HW_BRK_TYPE_KERNEL;
if (!attr->exclude_hv)
hw->type |= HW_BRK_TYPE_HYP;
hw->address = attr->bp_addr;
hw->len = attr->bp_len;
if (!ppc_breakpoint_available())
return -ENODEV;
return hw_breakpoint_validate_len(hw);
}
/*
* Restores the breakpoint on the debug registers.
* Invoke this function if it is known that the execution context is
* about to change to cause loss of MSR_SE settings.
*/
void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs)
{
struct arch_hw_breakpoint *info;
int i;
for (i = 0; i < nr_wp_slots(); i++) {
if (unlikely(tsk->thread.last_hit_ubp[i]))
goto reset;
}
return;
reset:
regs->msr &= ~MSR_SE;
for (i = 0; i < nr_wp_slots(); i++) {
info = counter_arch_bp(__this_cpu_read(bp_per_reg[i]));
__set_breakpoint(i, info);
tsk->thread.last_hit_ubp[i] = NULL;
}
}
static bool is_larx_stcx_instr(int type)
{
return type == LARX || type == STCX;
}
/*
* We've failed in reliably handling the hw-breakpoint. Unregister
* it and throw a warning message to let the user know about it.
*/
static void handler_error(struct perf_event *bp, struct arch_hw_breakpoint *info)
{
WARN(1, "Unable to handle hardware breakpoint. Breakpoint at 0x%lx will be disabled.",
info->address);
perf_event_disable_inatomic(bp);
}
static void larx_stcx_err(struct perf_event *bp, struct arch_hw_breakpoint *info)
{
printk_ratelimited("Breakpoint hit on instruction that can't be emulated. Breakpoint at 0x%lx will be disabled.\n",
info->address);
perf_event_disable_inatomic(bp);
}
static bool stepping_handler(struct pt_regs *regs, struct perf_event **bp,
struct arch_hw_breakpoint **info, int *hit,
struct ppc_inst instr)
{
int i;
int stepped;
/* Do not emulate user-space instructions, instead single-step them */
if (user_mode(regs)) {
for (i = 0; i < nr_wp_slots(); i++) {
if (!hit[i])
continue;
current->thread.last_hit_ubp[i] = bp[i];
info[i] = NULL;
}
regs->msr |= MSR_SE;
return false;
}
stepped = emulate_step(regs, instr);
if (!stepped) {
for (i = 0; i < nr_wp_slots(); i++) {
if (!hit[i])
continue;
handler_error(bp[i], info[i]);
info[i] = NULL;
}
return false;
}
return true;
}
int hw_breakpoint_handler(struct die_args *args)
{
bool err = false;
int rc = NOTIFY_STOP;
struct perf_event *bp[HBP_NUM_MAX] = { NULL };
struct pt_regs *regs = args->regs;
struct arch_hw_breakpoint *info[HBP_NUM_MAX] = { NULL };
int i;
int hit[HBP_NUM_MAX] = {0};
int nr_hit = 0;
bool ptrace_bp = false;
struct ppc_inst instr = ppc_inst(0);
int type = 0;
int size = 0;
unsigned long ea;
/* Disable breakpoints during exception handling */
hw_breakpoint_disable();
/*
* The counter may be concurrently released but that can only
* occur from a call_rcu() path. We can then safely fetch
* the breakpoint, use its callback, touch its counter
* while we are in an rcu_read_lock() path.
*/
rcu_read_lock();
if (!IS_ENABLED(CONFIG_PPC_8xx))
wp_get_instr_detail(regs, &instr, &type, &size, &ea);
for (i = 0; i < nr_wp_slots(); i++) {
bp[i] = __this_cpu_read(bp_per_reg[i]);
if (!bp[i])
continue;
info[i] = counter_arch_bp(bp[i]);
info[i]->type &= ~HW_BRK_TYPE_EXTRANEOUS_IRQ;
if (wp_check_constraints(regs, instr, ea, type, size, info[i])) {
if (!IS_ENABLED(CONFIG_PPC_8xx) &&
ppc_inst_equal(instr, ppc_inst(0))) {
handler_error(bp[i], info[i]);
info[i] = NULL;
err = 1;
continue;
}
if (is_ptrace_bp(bp[i]))
ptrace_bp = true;
hit[i] = 1;
nr_hit++;
}
}
if (err)
goto reset;
if (!nr_hit) {
rc = NOTIFY_DONE;
goto out;
}
/*
* Return early after invoking user-callback function without restoring
* DABR if the breakpoint is from ptrace which always operates in
* one-shot mode. The ptrace-ed process will receive the SIGTRAP signal
* generated in do_dabr().
*/
if (ptrace_bp) {
for (i = 0; i < nr_wp_slots(); i++) {
if (!hit[i])
continue;
perf_bp_event(bp[i], regs);
info[i] = NULL;
}
rc = NOTIFY_DONE;
goto reset;
}
if (!IS_ENABLED(CONFIG_PPC_8xx)) {
if (is_larx_stcx_instr(type)) {
for (i = 0; i < nr_wp_slots(); i++) {
if (!hit[i])
continue;
larx_stcx_err(bp[i], info[i]);
info[i] = NULL;
}
goto reset;
}
if (!stepping_handler(regs, bp, info, hit, instr))
goto reset;
}
/*
* As a policy, the callback is invoked in a 'trigger-after-execute'
* fashion
*/
for (i = 0; i < nr_wp_slots(); i++) {
if (!hit[i])
continue;
if (!(info[i]->type & HW_BRK_TYPE_EXTRANEOUS_IRQ))
perf_bp_event(bp[i], regs);
}
reset:
for (i = 0; i < nr_wp_slots(); i++) {
if (!info[i])
continue;
__set_breakpoint(i, info[i]);
}
out:
rcu_read_unlock();
return rc;
}
NOKPROBE_SYMBOL(hw_breakpoint_handler);
/*
* Handle single-step exceptions following a DABR hit.
*/
static int single_step_dabr_instruction(struct die_args *args)
{
struct pt_regs *regs = args->regs;
struct perf_event *bp = NULL;
struct arch_hw_breakpoint *info;
int i;
bool found = false;
/*
* Check if we are single-stepping as a result of a
* previous HW Breakpoint exception
*/
for (i = 0; i < nr_wp_slots(); i++) {
bp = current->thread.last_hit_ubp[i];
if (!bp)
continue;
found = true;
info = counter_arch_bp(bp);
/*
* We shall invoke the user-defined callback function in the
* single stepping handler to confirm to 'trigger-after-execute'
* semantics
*/
if (!(info->type & HW_BRK_TYPE_EXTRANEOUS_IRQ))
perf_bp_event(bp, regs);
current->thread.last_hit_ubp[i] = NULL;
}
if (!found)
return NOTIFY_DONE;
for (i = 0; i < nr_wp_slots(); i++) {
bp = __this_cpu_read(bp_per_reg[i]);
if (!bp)
continue;
info = counter_arch_bp(bp);
__set_breakpoint(i, info);
}
/*
* If the process was being single-stepped by ptrace, let the
* other single-step actions occur (e.g. generate SIGTRAP).
*/
if (test_thread_flag(TIF_SINGLESTEP))
return NOTIFY_DONE;
return NOTIFY_STOP;
}
NOKPROBE_SYMBOL(single_step_dabr_instruction);
/*
* Handle debug exception notifications.
*/
int hw_breakpoint_exceptions_notify(
struct notifier_block *unused, unsigned long val, void *data)
{
int ret = NOTIFY_DONE;
switch (val) {
case DIE_DABR_MATCH:
ret = hw_breakpoint_handler(data);
break;
case DIE_SSTEP:
ret = single_step_dabr_instruction(data);
break;
}
return ret;
}
NOKPROBE_SYMBOL(hw_breakpoint_exceptions_notify);
/*
* Release the user breakpoints used by ptrace
*/
void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
{
int i;
struct thread_struct *t = &tsk->thread;
for (i = 0; i < nr_wp_slots(); i++) {
unregister_hw_breakpoint(t->ptrace_bps[i]);
t->ptrace_bps[i] = NULL;
}
}
void hw_breakpoint_pmu_read(struct perf_event *bp)
{
/* TODO */
}
void ptrace_triggered(struct perf_event *bp,
struct perf_sample_data *data, struct pt_regs *regs)
{
struct perf_event_attr attr;
/*
* Disable the breakpoint request here since ptrace has defined a
* one-shot behaviour for breakpoint exceptions in PPC64.
* The SIGTRAP signal is generated automatically for us in do_dabr().
* We don't have to do anything about that here
*/
attr = bp->attr;
attr.disabled = true;
modify_user_hw_breakpoint(bp, &attr);
}