OpenCloudOS-Kernel/drivers/net/vrf.c

1161 lines
26 KiB
C
Raw Normal View History

/*
* vrf.c: device driver to encapsulate a VRF space
*
* Copyright (c) 2015 Cumulus Networks. All rights reserved.
* Copyright (c) 2015 Shrijeet Mukherjee <shm@cumulusnetworks.com>
* Copyright (c) 2015 David Ahern <dsa@cumulusnetworks.com>
*
* Based on dummy, team and ipvlan drivers
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ip.h>
#include <linux/init.h>
#include <linux/moduleparam.h>
#include <linux/netfilter.h>
#include <linux/rtnetlink.h>
#include <net/rtnetlink.h>
#include <linux/u64_stats_sync.h>
#include <linux/hashtable.h>
#include <linux/inetdevice.h>
#include <net/arp.h>
#include <net/ip.h>
#include <net/ip_fib.h>
#include <net/ip6_fib.h>
#include <net/ip6_route.h>
#include <net/route.h>
#include <net/addrconf.h>
#include <net/l3mdev.h>
#include <net/fib_rules.h>
#define RT_FL_TOS(oldflp4) \
((oldflp4)->flowi4_tos & (IPTOS_RT_MASK | RTO_ONLINK))
#define DRV_NAME "vrf"
#define DRV_VERSION "1.0"
#define FIB_RULE_PREF 1000 /* default preference for FIB rules */
static bool add_fib_rules = true;
struct net_vrf {
struct rtable __rcu *rth;
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 11:50:39 +08:00
struct rtable __rcu *rth_local;
struct rt6_info __rcu *rt6;
struct rt6_info __rcu *rt6_local;
u32 tb_id;
};
struct pcpu_dstats {
u64 tx_pkts;
u64 tx_bytes;
u64 tx_drps;
u64 rx_pkts;
u64 rx_bytes;
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 11:50:39 +08:00
u64 rx_drps;
struct u64_stats_sync syncp;
};
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 11:50:39 +08:00
static void vrf_rx_stats(struct net_device *dev, int len)
{
struct pcpu_dstats *dstats = this_cpu_ptr(dev->dstats);
u64_stats_update_begin(&dstats->syncp);
dstats->rx_pkts++;
dstats->rx_bytes += len;
u64_stats_update_end(&dstats->syncp);
}
static void vrf_tx_error(struct net_device *vrf_dev, struct sk_buff *skb)
{
vrf_dev->stats.tx_errors++;
kfree_skb(skb);
}
static struct rtnl_link_stats64 *vrf_get_stats64(struct net_device *dev,
struct rtnl_link_stats64 *stats)
{
int i;
for_each_possible_cpu(i) {
const struct pcpu_dstats *dstats;
u64 tbytes, tpkts, tdrops, rbytes, rpkts;
unsigned int start;
dstats = per_cpu_ptr(dev->dstats, i);
do {
start = u64_stats_fetch_begin_irq(&dstats->syncp);
tbytes = dstats->tx_bytes;
tpkts = dstats->tx_pkts;
tdrops = dstats->tx_drps;
rbytes = dstats->rx_bytes;
rpkts = dstats->rx_pkts;
} while (u64_stats_fetch_retry_irq(&dstats->syncp, start));
stats->tx_bytes += tbytes;
stats->tx_packets += tpkts;
stats->tx_dropped += tdrops;
stats->rx_bytes += rbytes;
stats->rx_packets += rpkts;
}
return stats;
}
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 11:50:39 +08:00
/* Local traffic destined to local address. Reinsert the packet to rx
* path, similar to loopback handling.
*/
static int vrf_local_xmit(struct sk_buff *skb, struct net_device *dev,
struct dst_entry *dst)
{
int len = skb->len;
skb_orphan(skb);
skb_dst_set(skb, dst);
skb_dst_force(skb);
/* set pkt_type to avoid skb hitting packet taps twice -
* once on Tx and again in Rx processing
*/
skb->pkt_type = PACKET_LOOPBACK;
skb->protocol = eth_type_trans(skb, dev);
if (likely(netif_rx(skb) == NET_RX_SUCCESS))
vrf_rx_stats(dev, len);
else
this_cpu_inc(dev->dstats->rx_drps);
return NETDEV_TX_OK;
}
#if IS_ENABLED(CONFIG_IPV6)
static netdev_tx_t vrf_process_v6_outbound(struct sk_buff *skb,
struct net_device *dev)
{
const struct ipv6hdr *iph = ipv6_hdr(skb);
struct net *net = dev_net(skb->dev);
struct flowi6 fl6 = {
/* needed to match OIF rule */
.flowi6_oif = dev->ifindex,
.flowi6_iif = LOOPBACK_IFINDEX,
.daddr = iph->daddr,
.saddr = iph->saddr,
.flowlabel = ip6_flowinfo(iph),
.flowi6_mark = skb->mark,
.flowi6_proto = iph->nexthdr,
.flowi6_flags = FLOWI_FLAG_L3MDEV_SRC | FLOWI_FLAG_SKIP_NH_OIF,
};
int ret = NET_XMIT_DROP;
struct dst_entry *dst;
struct dst_entry *dst_null = &net->ipv6.ip6_null_entry->dst;
dst = ip6_route_output(net, NULL, &fl6);
if (dst == dst_null)
goto err;
skb_dst_drop(skb);
/* if dst.dev is loopback or the VRF device again this is locally
* originated traffic destined to a local address. Short circuit
* to Rx path using our local dst
*/
if (dst->dev == net->loopback_dev || dst->dev == dev) {
struct net_vrf *vrf = netdev_priv(dev);
struct rt6_info *rt6_local;
/* release looked up dst and use cached local dst */
dst_release(dst);
rcu_read_lock();
rt6_local = rcu_dereference(vrf->rt6_local);
if (unlikely(!rt6_local)) {
rcu_read_unlock();
goto err;
}
/* Ordering issue: cached local dst is created on newlink
* before the IPv6 initialization. Using the local dst
* requires rt6i_idev to be set so make sure it is.
*/
if (unlikely(!rt6_local->rt6i_idev)) {
rt6_local->rt6i_idev = in6_dev_get(dev);
if (!rt6_local->rt6i_idev) {
rcu_read_unlock();
goto err;
}
}
dst = &rt6_local->dst;
dst_hold(dst);
rcu_read_unlock();
return vrf_local_xmit(skb, dev, &rt6_local->dst);
}
skb_dst_set(skb, dst);
/* strip the ethernet header added for pass through VRF device */
__skb_pull(skb, skb_network_offset(skb));
ret = ip6_local_out(net, skb->sk, skb);
if (unlikely(net_xmit_eval(ret)))
dev->stats.tx_errors++;
else
ret = NET_XMIT_SUCCESS;
return ret;
err:
vrf_tx_error(dev, skb);
return NET_XMIT_DROP;
}
#else
static netdev_tx_t vrf_process_v6_outbound(struct sk_buff *skb,
struct net_device *dev)
{
vrf_tx_error(dev, skb);
return NET_XMIT_DROP;
}
#endif
static netdev_tx_t vrf_process_v4_outbound(struct sk_buff *skb,
struct net_device *vrf_dev)
{
struct iphdr *ip4h = ip_hdr(skb);
int ret = NET_XMIT_DROP;
struct flowi4 fl4 = {
/* needed to match OIF rule */
.flowi4_oif = vrf_dev->ifindex,
.flowi4_iif = LOOPBACK_IFINDEX,
.flowi4_tos = RT_TOS(ip4h->tos),
.flowi4_flags = FLOWI_FLAG_ANYSRC | FLOWI_FLAG_L3MDEV_SRC |
FLOWI_FLAG_SKIP_NH_OIF,
.daddr = ip4h->daddr,
};
struct net *net = dev_net(vrf_dev);
struct rtable *rt;
rt = ip_route_output_flow(net, &fl4, NULL);
if (IS_ERR(rt))
goto err;
if (rt->rt_type != RTN_UNICAST && rt->rt_type != RTN_LOCAL) {
ip_rt_put(rt);
goto err;
}
skb_dst_drop(skb);
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 11:50:39 +08:00
/* if dst.dev is loopback or the VRF device again this is locally
* originated traffic destined to a local address. Short circuit
* to Rx path using our local dst
*/
if (rt->dst.dev == net->loopback_dev || rt->dst.dev == vrf_dev) {
struct net_vrf *vrf = netdev_priv(vrf_dev);
struct rtable *rth_local;
struct dst_entry *dst = NULL;
ip_rt_put(rt);
rcu_read_lock();
rth_local = rcu_dereference(vrf->rth_local);
if (likely(rth_local)) {
dst = &rth_local->dst;
dst_hold(dst);
}
rcu_read_unlock();
if (unlikely(!dst))
goto err;
return vrf_local_xmit(skb, vrf_dev, dst);
}
skb_dst_set(skb, &rt->dst);
/* strip the ethernet header added for pass through VRF device */
__skb_pull(skb, skb_network_offset(skb));
if (!ip4h->saddr) {
ip4h->saddr = inet_select_addr(skb_dst(skb)->dev, 0,
RT_SCOPE_LINK);
}
ret = ip_local_out(dev_net(skb_dst(skb)->dev), skb->sk, skb);
if (unlikely(net_xmit_eval(ret)))
vrf_dev->stats.tx_errors++;
else
ret = NET_XMIT_SUCCESS;
out:
return ret;
err:
vrf_tx_error(vrf_dev, skb);
goto out;
}
static netdev_tx_t is_ip_tx_frame(struct sk_buff *skb, struct net_device *dev)
{
switch (skb->protocol) {
case htons(ETH_P_IP):
return vrf_process_v4_outbound(skb, dev);
case htons(ETH_P_IPV6):
return vrf_process_v6_outbound(skb, dev);
default:
vrf_tx_error(dev, skb);
return NET_XMIT_DROP;
}
}
static netdev_tx_t vrf_xmit(struct sk_buff *skb, struct net_device *dev)
{
netdev_tx_t ret = is_ip_tx_frame(skb, dev);
if (likely(ret == NET_XMIT_SUCCESS || ret == NET_XMIT_CN)) {
struct pcpu_dstats *dstats = this_cpu_ptr(dev->dstats);
u64_stats_update_begin(&dstats->syncp);
dstats->tx_pkts++;
dstats->tx_bytes += skb->len;
u64_stats_update_end(&dstats->syncp);
} else {
this_cpu_inc(dev->dstats->tx_drps);
}
return ret;
}
#if IS_ENABLED(CONFIG_IPV6)
/* modelled after ip6_finish_output2 */
static int vrf_finish_output6(struct net *net, struct sock *sk,
struct sk_buff *skb)
{
struct dst_entry *dst = skb_dst(skb);
struct net_device *dev = dst->dev;
struct neighbour *neigh;
struct in6_addr *nexthop;
int ret;
skb->protocol = htons(ETH_P_IPV6);
skb->dev = dev;
rcu_read_lock_bh();
nexthop = rt6_nexthop((struct rt6_info *)dst, &ipv6_hdr(skb)->daddr);
neigh = __ipv6_neigh_lookup_noref(dst->dev, nexthop);
if (unlikely(!neigh))
neigh = __neigh_create(&nd_tbl, nexthop, dst->dev, false);
if (!IS_ERR(neigh)) {
ret = dst_neigh_output(dst, neigh, skb);
rcu_read_unlock_bh();
return ret;
}
rcu_read_unlock_bh();
IP6_INC_STATS(dev_net(dst->dev),
ip6_dst_idev(dst), IPSTATS_MIB_OUTNOROUTES);
kfree_skb(skb);
return -EINVAL;
}
/* modelled after ip6_output */
static int vrf_output6(struct net *net, struct sock *sk, struct sk_buff *skb)
{
return NF_HOOK_COND(NFPROTO_IPV6, NF_INET_POST_ROUTING,
net, sk, skb, NULL, skb_dst(skb)->dev,
vrf_finish_output6,
!(IP6CB(skb)->flags & IP6SKB_REROUTED));
}
/* holding rtnl */
static void vrf_rt6_release(struct net_vrf *vrf)
{
struct rt6_info *rt6 = rtnl_dereference(vrf->rt6);
struct rt6_info *rt6_local = rtnl_dereference(vrf->rt6_local);
RCU_INIT_POINTER(vrf->rt6, NULL);
RCU_INIT_POINTER(vrf->rt6_local, NULL);
synchronize_rcu();
if (rt6)
dst_release(&rt6->dst);
if (rt6_local) {
if (rt6_local->rt6i_idev)
in6_dev_put(rt6_local->rt6i_idev);
dst_release(&rt6_local->dst);
}
}
static int vrf_rt6_create(struct net_device *dev)
{
int flags = DST_HOST | DST_NOPOLICY | DST_NOXFRM | DST_NOCACHE;
struct net_vrf *vrf = netdev_priv(dev);
struct net *net = dev_net(dev);
struct fib6_table *rt6i_table;
struct rt6_info *rt6, *rt6_local;
int rc = -ENOMEM;
net: vrf: Fix crash when IPv6 is disabled at boot time Frank Kellermann reported a kernel crash with 4.5.0 when IPv6 is disabled at boot using the kernel option ipv6.disable=1. Using current net-next with the boot option: $ ip link add red type vrf table 1001 Generates: [12210.919584] BUG: unable to handle kernel NULL pointer dereference at 0000000000000748 [12210.921341] IP: [<ffffffff814b30e3>] fib6_get_table+0x2c/0x5a [12210.922537] PGD b79e3067 PUD bb32b067 PMD 0 [12210.923479] Oops: 0000 [#1] SMP [12210.924001] Modules linked in: ipvlan 8021q garp mrp stp llc [12210.925130] CPU: 3 PID: 1177 Comm: ip Not tainted 4.7.0-rc1+ #235 [12210.926168] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [12210.928065] task: ffff8800b9ac4640 ti: ffff8800bacac000 task.ti: ffff8800bacac000 [12210.929328] RIP: 0010:[<ffffffff814b30e3>] [<ffffffff814b30e3>] fib6_get_table+0x2c/0x5a [12210.930697] RSP: 0018:ffff8800bacaf888 EFLAGS: 00010202 [12210.931563] RAX: 0000000000000748 RBX: ffffffff81a9e280 RCX: ffff8800b9ac4e28 [12210.932688] RDX: 00000000000000e9 RSI: 0000000000000002 RDI: 0000000000000286 [12210.933820] RBP: ffff8800bacaf898 R08: ffff8800b9ac4df0 R09: 000000000052001b [12210.934941] R10: 00000000657c0000 R11: 000000000000c649 R12: 00000000000003e9 [12210.936032] R13: 00000000000003e9 R14: ffff8800bace7800 R15: ffff8800bb3ec000 [12210.937103] FS: 00007faa1766c700(0000) GS:ffff88013ac00000(0000) knlGS:0000000000000000 [12210.938321] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12210.939166] CR2: 0000000000000748 CR3: 00000000b79d6000 CR4: 00000000000406e0 [12210.940278] Stack: [12210.940603] ffff8800bb3ec000 ffffffff81a9e280 ffff8800bacaf8c8 ffffffff814b3135 [12210.941818] ffff8800bb3ec000 ffffffff81a9e280 ffffffff81a9e280 ffff8800bace7800 [12210.943040] ffff8800bacaf8f0 ffffffff81397c88 ffff8800bb3ec000 ffffffff81a9e280 [12210.944288] Call Trace: [12210.944688] [<ffffffff814b3135>] fib6_new_table+0x24/0x8a [12210.945516] [<ffffffff81397c88>] vrf_dev_init+0xd4/0x162 [12210.946328] [<ffffffff814091e1>] register_netdevice+0x100/0x396 [12210.947209] [<ffffffff8139823d>] vrf_newlink+0x40/0xb3 [12210.948001] [<ffffffff814187f0>] rtnl_newlink+0x5d3/0x6d5 ... The problem above is due to the fact that the fib hash table is not allocated when IPv6 is disabled at boot. As for the VRF driver it should not do any IPv6 initializations if IPv6 is disabled, so it needs to know if IPv6 is disabled at boot. The disable parameter is private to the IPv6 module, so provide an accessor for modules to determine if IPv6 was disabled at boot time. Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10 01:21:00 +08:00
/* IPv6 can be CONFIG enabled and then disabled runtime */
if (!ipv6_mod_enabled())
return 0;
rt6i_table = fib6_new_table(net, vrf->tb_id);
if (!rt6i_table)
goto out;
/* create a dst for routing packets out a VRF device */
rt6 = ip6_dst_alloc(net, dev, flags);
if (!rt6)
goto out;
dst_hold(&rt6->dst);
rt6->rt6i_table = rt6i_table;
rt6->dst.output = vrf_output6;
/* create a dst for local routing - packets sent locally
* to local address via the VRF device as a loopback
*/
rt6_local = ip6_dst_alloc(net, dev, flags);
if (!rt6_local) {
dst_release(&rt6->dst);
goto out;
}
dst_hold(&rt6_local->dst);
rt6_local->rt6i_idev = in6_dev_get(dev);
rt6_local->rt6i_flags = RTF_UP | RTF_NONEXTHOP | RTF_LOCAL;
rt6_local->rt6i_table = rt6i_table;
rt6_local->dst.input = ip6_input;
rcu_assign_pointer(vrf->rt6, rt6);
rcu_assign_pointer(vrf->rt6_local, rt6_local);
rc = 0;
out:
return rc;
}
#else
static void vrf_rt6_release(struct net_vrf *vrf)
{
}
static int vrf_rt6_create(struct net_device *dev)
{
return 0;
}
#endif
/* modelled after ip_finish_output2 */
static int vrf_finish_output(struct net *net, struct sock *sk, struct sk_buff *skb)
{
struct dst_entry *dst = skb_dst(skb);
struct rtable *rt = (struct rtable *)dst;
struct net_device *dev = dst->dev;
unsigned int hh_len = LL_RESERVED_SPACE(dev);
struct neighbour *neigh;
u32 nexthop;
int ret = -EINVAL;
/* Be paranoid, rather than too clever. */
if (unlikely(skb_headroom(skb) < hh_len && dev->header_ops)) {
struct sk_buff *skb2;
skb2 = skb_realloc_headroom(skb, LL_RESERVED_SPACE(dev));
if (!skb2) {
ret = -ENOMEM;
goto err;
}
if (skb->sk)
skb_set_owner_w(skb2, skb->sk);
consume_skb(skb);
skb = skb2;
}
rcu_read_lock_bh();
nexthop = (__force u32)rt_nexthop(rt, ip_hdr(skb)->daddr);
neigh = __ipv4_neigh_lookup_noref(dev, nexthop);
if (unlikely(!neigh))
neigh = __neigh_create(&arp_tbl, &nexthop, dev, false);
if (!IS_ERR(neigh))
ret = dst_neigh_output(dst, neigh, skb);
rcu_read_unlock_bh();
err:
if (unlikely(ret < 0))
vrf_tx_error(skb->dev, skb);
return ret;
}
static int vrf_output(struct net *net, struct sock *sk, struct sk_buff *skb)
{
struct net_device *dev = skb_dst(skb)->dev;
2015-09-16 09:04:16 +08:00
IP_UPD_PO_STATS(net, IPSTATS_MIB_OUT, skb->len);
skb->dev = dev;
skb->protocol = htons(ETH_P_IP);
2015-09-16 09:04:16 +08:00
return NF_HOOK_COND(NFPROTO_IPV4, NF_INET_POST_ROUTING,
net, sk, skb, NULL, dev,
vrf_finish_output,
!(IPCB(skb)->flags & IPSKB_REROUTED));
}
/* holding rtnl */
static void vrf_rtable_release(struct net_vrf *vrf)
{
struct rtable *rth = rtnl_dereference(vrf->rth);
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 11:50:39 +08:00
struct rtable *rth_local = rtnl_dereference(vrf->rth_local);
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 11:50:39 +08:00
RCU_INIT_POINTER(vrf->rth, NULL);
RCU_INIT_POINTER(vrf->rth_local, NULL);
synchronize_rcu();
if (rth)
dst_release(&rth->dst);
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 11:50:39 +08:00
if (rth_local)
dst_release(&rth_local->dst);
}
static int vrf_rtable_create(struct net_device *dev)
{
struct net_vrf *vrf = netdev_priv(dev);
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 11:50:39 +08:00
struct rtable *rth, *rth_local;
if (!fib_new_table(dev_net(dev), vrf->tb_id))
return -ENOMEM;
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 11:50:39 +08:00
/* create a dst for routing packets out through a VRF device */
rth = rt_dst_alloc(dev, 0, RTN_UNICAST, 1, 1, 0);
if (!rth)
return -ENOMEM;
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 11:50:39 +08:00
/* create a dst for local ingress routing - packets sent locally
* to local address via the VRF device as a loopback
*/
rth_local = rt_dst_alloc(dev, RTCF_LOCAL, RTN_LOCAL, 1, 1, 0);
if (!rth_local) {
dst_release(&rth->dst);
return -ENOMEM;
}
rth->dst.output = vrf_output;
rth->rt_table_id = vrf->tb_id;
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 11:50:39 +08:00
rth_local->rt_table_id = vrf->tb_id;
rcu_assign_pointer(vrf->rth, rth);
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 11:50:39 +08:00
rcu_assign_pointer(vrf->rth_local, rth_local);
return 0;
}
/**************************** device handling ********************/
/* cycle interface to flush neighbor cache and move routes across tables */
static void cycle_netdev(struct net_device *dev)
{
unsigned int flags = dev->flags;
int ret;
if (!netif_running(dev))
return;
ret = dev_change_flags(dev, flags & ~IFF_UP);
if (ret >= 0)
ret = dev_change_flags(dev, flags);
if (ret < 0) {
netdev_err(dev,
"Failed to cycle device %s; route tables might be wrong!\n",
dev->name);
}
}
static int do_vrf_add_slave(struct net_device *dev, struct net_device *port_dev)
{
int ret;
ret = netdev_master_upper_dev_link(port_dev, dev, NULL, NULL);
if (ret < 0)
return ret;
port_dev->priv_flags |= IFF_L3MDEV_SLAVE;
cycle_netdev(port_dev);
return 0;
}
static int vrf_add_slave(struct net_device *dev, struct net_device *port_dev)
{
if (netif_is_l3_master(port_dev) || netif_is_l3_slave(port_dev))
return -EINVAL;
return do_vrf_add_slave(dev, port_dev);
}
/* inverse of do_vrf_add_slave */
static int do_vrf_del_slave(struct net_device *dev, struct net_device *port_dev)
{
netdev_upper_dev_unlink(port_dev, dev);
port_dev->priv_flags &= ~IFF_L3MDEV_SLAVE;
cycle_netdev(port_dev);
return 0;
}
static int vrf_del_slave(struct net_device *dev, struct net_device *port_dev)
{
return do_vrf_del_slave(dev, port_dev);
}
static void vrf_dev_uninit(struct net_device *dev)
{
struct net_vrf *vrf = netdev_priv(dev);
struct net_device *port_dev;
struct list_head *iter;
vrf_rtable_release(vrf);
vrf_rt6_release(vrf);
netdev_for_each_lower_dev(dev, port_dev, iter)
vrf_del_slave(dev, port_dev);
free_percpu(dev->dstats);
dev->dstats = NULL;
}
static int vrf_dev_init(struct net_device *dev)
{
struct net_vrf *vrf = netdev_priv(dev);
dev->dstats = netdev_alloc_pcpu_stats(struct pcpu_dstats);
if (!dev->dstats)
goto out_nomem;
/* create the default dst which points back to us */
if (vrf_rtable_create(dev) != 0)
goto out_stats;
if (vrf_rt6_create(dev) != 0)
goto out_rth;
dev->flags = IFF_MASTER | IFF_NOARP;
/* MTU is irrelevant for VRF device; set to 64k similar to lo */
dev->mtu = 64 * 1024;
/* similarly, oper state is irrelevant; set to up to avoid confusion */
dev->operstate = IF_OPER_UP;
netdev_lockdep_set_classes(dev);
return 0;
out_rth:
vrf_rtable_release(vrf);
out_stats:
free_percpu(dev->dstats);
dev->dstats = NULL;
out_nomem:
return -ENOMEM;
}
static const struct net_device_ops vrf_netdev_ops = {
.ndo_init = vrf_dev_init,
.ndo_uninit = vrf_dev_uninit,
.ndo_start_xmit = vrf_xmit,
.ndo_get_stats64 = vrf_get_stats64,
.ndo_add_slave = vrf_add_slave,
.ndo_del_slave = vrf_del_slave,
};
static u32 vrf_fib_table(const struct net_device *dev)
{
struct net_vrf *vrf = netdev_priv(dev);
return vrf->tb_id;
}
static struct rtable *vrf_get_rtable(const struct net_device *dev,
const struct flowi4 *fl4)
{
struct rtable *rth = NULL;
if (!(fl4->flowi4_flags & FLOWI_FLAG_L3MDEV_SRC)) {
struct net_vrf *vrf = netdev_priv(dev);
rcu_read_lock();
rth = rcu_dereference(vrf->rth);
if (likely(rth))
dst_hold(&rth->dst);
rcu_read_unlock();
}
return rth;
}
/* called under rcu_read_lock */
static int vrf_get_saddr(struct net_device *dev, struct flowi4 *fl4)
{
struct fib_result res = { .tclassid = 0 };
struct net *net = dev_net(dev);
u32 orig_tos = fl4->flowi4_tos;
u8 flags = fl4->flowi4_flags;
u8 scope = fl4->flowi4_scope;
u8 tos = RT_FL_TOS(fl4);
int rc;
if (unlikely(!fl4->daddr))
return 0;
fl4->flowi4_flags |= FLOWI_FLAG_SKIP_NH_OIF;
fl4->flowi4_iif = LOOPBACK_IFINDEX;
/* make sure oif is set to VRF device for lookup */
fl4->flowi4_oif = dev->ifindex;
fl4->flowi4_tos = tos & IPTOS_RT_MASK;
fl4->flowi4_scope = ((tos & RTO_ONLINK) ?
RT_SCOPE_LINK : RT_SCOPE_UNIVERSE);
rc = fib_lookup(net, fl4, &res, 0);
if (!rc) {
if (res.type == RTN_LOCAL)
fl4->saddr = res.fi->fib_prefsrc ? : fl4->daddr;
else
fib_select_path(net, &res, fl4, -1);
}
fl4->flowi4_flags = flags;
fl4->flowi4_tos = orig_tos;
fl4->flowi4_scope = scope;
return rc;
}
#if IS_ENABLED(CONFIG_IPV6)
/* neighbor handling is done with actual device; do not want
* to flip skb->dev for those ndisc packets. This really fails
* for multiple next protocols (e.g., NEXTHDR_HOP). But it is
* a start.
*/
static bool ipv6_ndisc_frame(const struct sk_buff *skb)
{
const struct ipv6hdr *iph = ipv6_hdr(skb);
bool rc = false;
if (iph->nexthdr == NEXTHDR_ICMP) {
const struct icmp6hdr *icmph;
struct icmp6hdr _icmph;
icmph = skb_header_pointer(skb, sizeof(*iph),
sizeof(_icmph), &_icmph);
if (!icmph)
goto out;
switch (icmph->icmp6_type) {
case NDISC_ROUTER_SOLICITATION:
case NDISC_ROUTER_ADVERTISEMENT:
case NDISC_NEIGHBOUR_SOLICITATION:
case NDISC_NEIGHBOUR_ADVERTISEMENT:
case NDISC_REDIRECT:
rc = true;
break;
}
}
out:
return rc;
}
static struct sk_buff *vrf_ip6_rcv(struct net_device *vrf_dev,
struct sk_buff *skb)
{
/* loopback traffic; do not push through packet taps again.
* Reset pkt_type for upper layers to process skb
*/
if (skb->pkt_type == PACKET_LOOPBACK) {
skb->dev = vrf_dev;
skb->skb_iif = vrf_dev->ifindex;
skb->pkt_type = PACKET_HOST;
goto out;
}
/* if packet is NDISC keep the ingress interface */
if (!ipv6_ndisc_frame(skb)) {
skb->dev = vrf_dev;
skb->skb_iif = vrf_dev->ifindex;
skb_push(skb, skb->mac_len);
dev_queue_xmit_nit(skb, vrf_dev);
skb_pull(skb, skb->mac_len);
IP6CB(skb)->flags |= IP6SKB_L3SLAVE;
}
out:
return skb;
}
#else
static struct sk_buff *vrf_ip6_rcv(struct net_device *vrf_dev,
struct sk_buff *skb)
{
return skb;
}
#endif
static struct sk_buff *vrf_ip_rcv(struct net_device *vrf_dev,
struct sk_buff *skb)
{
skb->dev = vrf_dev;
skb->skb_iif = vrf_dev->ifindex;
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 11:50:39 +08:00
/* loopback traffic; do not push through packet taps again.
* Reset pkt_type for upper layers to process skb
*/
if (skb->pkt_type == PACKET_LOOPBACK) {
skb->pkt_type = PACKET_HOST;
goto out;
}
skb_push(skb, skb->mac_len);
dev_queue_xmit_nit(skb, vrf_dev);
skb_pull(skb, skb->mac_len);
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 11:50:39 +08:00
out:
return skb;
}
/* called with rcu lock held */
static struct sk_buff *vrf_l3_rcv(struct net_device *vrf_dev,
struct sk_buff *skb,
u16 proto)
{
switch (proto) {
case AF_INET:
return vrf_ip_rcv(vrf_dev, skb);
case AF_INET6:
return vrf_ip6_rcv(vrf_dev, skb);
}
return skb;
}
#if IS_ENABLED(CONFIG_IPV6)
static struct dst_entry *vrf_get_rt6_dst(const struct net_device *dev,
struct flowi6 *fl6)
{
struct dst_entry *dst = NULL;
if (!(fl6->flowi6_flags & FLOWI_FLAG_L3MDEV_SRC)) {
struct net_vrf *vrf = netdev_priv(dev);
struct rt6_info *rt;
rcu_read_lock();
rt = rcu_dereference(vrf->rt6);
if (likely(rt)) {
dst = &rt->dst;
dst_hold(dst);
}
rcu_read_unlock();
}
return dst;
}
#endif
static const struct l3mdev_ops vrf_l3mdev_ops = {
.l3mdev_fib_table = vrf_fib_table,
.l3mdev_get_rtable = vrf_get_rtable,
.l3mdev_get_saddr = vrf_get_saddr,
.l3mdev_l3_rcv = vrf_l3_rcv,
#if IS_ENABLED(CONFIG_IPV6)
.l3mdev_get_rt6_dst = vrf_get_rt6_dst,
#endif
};
static void vrf_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
strlcpy(info->version, DRV_VERSION, sizeof(info->version));
}
static const struct ethtool_ops vrf_ethtool_ops = {
.get_drvinfo = vrf_get_drvinfo,
};
static inline size_t vrf_fib_rule_nl_size(void)
{
size_t sz;
sz = NLMSG_ALIGN(sizeof(struct fib_rule_hdr));
sz += nla_total_size(sizeof(u8)); /* FRA_L3MDEV */
sz += nla_total_size(sizeof(u32)); /* FRA_PRIORITY */
return sz;
}
static int vrf_fib_rule(const struct net_device *dev, __u8 family, bool add_it)
{
struct fib_rule_hdr *frh;
struct nlmsghdr *nlh;
struct sk_buff *skb;
int err;
net: vrf: Fix crash when IPv6 is disabled at boot time Frank Kellermann reported a kernel crash with 4.5.0 when IPv6 is disabled at boot using the kernel option ipv6.disable=1. Using current net-next with the boot option: $ ip link add red type vrf table 1001 Generates: [12210.919584] BUG: unable to handle kernel NULL pointer dereference at 0000000000000748 [12210.921341] IP: [<ffffffff814b30e3>] fib6_get_table+0x2c/0x5a [12210.922537] PGD b79e3067 PUD bb32b067 PMD 0 [12210.923479] Oops: 0000 [#1] SMP [12210.924001] Modules linked in: ipvlan 8021q garp mrp stp llc [12210.925130] CPU: 3 PID: 1177 Comm: ip Not tainted 4.7.0-rc1+ #235 [12210.926168] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [12210.928065] task: ffff8800b9ac4640 ti: ffff8800bacac000 task.ti: ffff8800bacac000 [12210.929328] RIP: 0010:[<ffffffff814b30e3>] [<ffffffff814b30e3>] fib6_get_table+0x2c/0x5a [12210.930697] RSP: 0018:ffff8800bacaf888 EFLAGS: 00010202 [12210.931563] RAX: 0000000000000748 RBX: ffffffff81a9e280 RCX: ffff8800b9ac4e28 [12210.932688] RDX: 00000000000000e9 RSI: 0000000000000002 RDI: 0000000000000286 [12210.933820] RBP: ffff8800bacaf898 R08: ffff8800b9ac4df0 R09: 000000000052001b [12210.934941] R10: 00000000657c0000 R11: 000000000000c649 R12: 00000000000003e9 [12210.936032] R13: 00000000000003e9 R14: ffff8800bace7800 R15: ffff8800bb3ec000 [12210.937103] FS: 00007faa1766c700(0000) GS:ffff88013ac00000(0000) knlGS:0000000000000000 [12210.938321] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12210.939166] CR2: 0000000000000748 CR3: 00000000b79d6000 CR4: 00000000000406e0 [12210.940278] Stack: [12210.940603] ffff8800bb3ec000 ffffffff81a9e280 ffff8800bacaf8c8 ffffffff814b3135 [12210.941818] ffff8800bb3ec000 ffffffff81a9e280 ffffffff81a9e280 ffff8800bace7800 [12210.943040] ffff8800bacaf8f0 ffffffff81397c88 ffff8800bb3ec000 ffffffff81a9e280 [12210.944288] Call Trace: [12210.944688] [<ffffffff814b3135>] fib6_new_table+0x24/0x8a [12210.945516] [<ffffffff81397c88>] vrf_dev_init+0xd4/0x162 [12210.946328] [<ffffffff814091e1>] register_netdevice+0x100/0x396 [12210.947209] [<ffffffff8139823d>] vrf_newlink+0x40/0xb3 [12210.948001] [<ffffffff814187f0>] rtnl_newlink+0x5d3/0x6d5 ... The problem above is due to the fact that the fib hash table is not allocated when IPv6 is disabled at boot. As for the VRF driver it should not do any IPv6 initializations if IPv6 is disabled, so it needs to know if IPv6 is disabled at boot. The disable parameter is private to the IPv6 module, so provide an accessor for modules to determine if IPv6 was disabled at boot time. Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10 01:21:00 +08:00
if (family == AF_INET6 && !ipv6_mod_enabled())
return 0;
skb = nlmsg_new(vrf_fib_rule_nl_size(), GFP_KERNEL);
if (!skb)
return -ENOMEM;
nlh = nlmsg_put(skb, 0, 0, 0, sizeof(*frh), 0);
if (!nlh)
goto nla_put_failure;
/* rule only needs to appear once */
nlh->nlmsg_flags &= NLM_F_EXCL;
frh = nlmsg_data(nlh);
memset(frh, 0, sizeof(*frh));
frh->family = family;
frh->action = FR_ACT_TO_TBL;
if (nla_put_u32(skb, FRA_L3MDEV, 1))
goto nla_put_failure;
if (nla_put_u32(skb, FRA_PRIORITY, FIB_RULE_PREF))
goto nla_put_failure;
nlmsg_end(skb, nlh);
/* fib_nl_{new,del}rule handling looks for net from skb->sk */
skb->sk = dev_net(dev)->rtnl;
if (add_it) {
err = fib_nl_newrule(skb, nlh);
if (err == -EEXIST)
err = 0;
} else {
err = fib_nl_delrule(skb, nlh);
if (err == -ENOENT)
err = 0;
}
nlmsg_free(skb);
return err;
nla_put_failure:
nlmsg_free(skb);
return -EMSGSIZE;
}
static int vrf_add_fib_rules(const struct net_device *dev)
{
int err;
err = vrf_fib_rule(dev, AF_INET, true);
if (err < 0)
goto out_err;
err = vrf_fib_rule(dev, AF_INET6, true);
if (err < 0)
goto ipv6_err;
return 0;
ipv6_err:
vrf_fib_rule(dev, AF_INET, false);
out_err:
netdev_err(dev, "Failed to add FIB rules.\n");
return err;
}
static void vrf_setup(struct net_device *dev)
{
ether_setup(dev);
/* Initialize the device structure. */
dev->netdev_ops = &vrf_netdev_ops;
dev->l3mdev_ops = &vrf_l3mdev_ops;
dev->ethtool_ops = &vrf_ethtool_ops;
dev->destructor = free_netdev;
/* Fill in device structure with ethernet-generic values. */
eth_hw_addr_random(dev);
/* don't acquire vrf device's netif_tx_lock when transmitting */
dev->features |= NETIF_F_LLTX;
/* don't allow vrf devices to change network namespaces. */
dev->features |= NETIF_F_NETNS_LOCAL;
}
static int vrf_validate(struct nlattr *tb[], struct nlattr *data[])
{
if (tb[IFLA_ADDRESS]) {
if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
return -EINVAL;
if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
return -EADDRNOTAVAIL;
}
return 0;
}
static void vrf_dellink(struct net_device *dev, struct list_head *head)
{
unregister_netdevice_queue(dev, head);
}
static int vrf_newlink(struct net *src_net, struct net_device *dev,
struct nlattr *tb[], struct nlattr *data[])
{
struct net_vrf *vrf = netdev_priv(dev);
int err;
if (!data || !data[IFLA_VRF_TABLE])
return -EINVAL;
vrf->tb_id = nla_get_u32(data[IFLA_VRF_TABLE]);
dev->priv_flags |= IFF_L3MDEV_MASTER;
err = register_netdevice(dev);
if (err)
goto out;
if (add_fib_rules) {
err = vrf_add_fib_rules(dev);
if (err) {
unregister_netdevice(dev);
goto out;
}
add_fib_rules = false;
}
out:
return err;
}
static size_t vrf_nl_getsize(const struct net_device *dev)
{
return nla_total_size(sizeof(u32)); /* IFLA_VRF_TABLE */
}
static int vrf_fillinfo(struct sk_buff *skb,
const struct net_device *dev)
{
struct net_vrf *vrf = netdev_priv(dev);
return nla_put_u32(skb, IFLA_VRF_TABLE, vrf->tb_id);
}
static size_t vrf_get_slave_size(const struct net_device *bond_dev,
const struct net_device *slave_dev)
{
return nla_total_size(sizeof(u32)); /* IFLA_VRF_PORT_TABLE */
}
static int vrf_fill_slave_info(struct sk_buff *skb,
const struct net_device *vrf_dev,
const struct net_device *slave_dev)
{
struct net_vrf *vrf = netdev_priv(vrf_dev);
if (nla_put_u32(skb, IFLA_VRF_PORT_TABLE, vrf->tb_id))
return -EMSGSIZE;
return 0;
}
static const struct nla_policy vrf_nl_policy[IFLA_VRF_MAX + 1] = {
[IFLA_VRF_TABLE] = { .type = NLA_U32 },
};
static struct rtnl_link_ops vrf_link_ops __read_mostly = {
.kind = DRV_NAME,
.priv_size = sizeof(struct net_vrf),
.get_size = vrf_nl_getsize,
.policy = vrf_nl_policy,
.validate = vrf_validate,
.fill_info = vrf_fillinfo,
.get_slave_size = vrf_get_slave_size,
.fill_slave_info = vrf_fill_slave_info,
.newlink = vrf_newlink,
.dellink = vrf_dellink,
.setup = vrf_setup,
.maxtype = IFLA_VRF_MAX,
};
static int vrf_device_event(struct notifier_block *unused,
unsigned long event, void *ptr)
{
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
/* only care about unregister events to drop slave references */
if (event == NETDEV_UNREGISTER) {
struct net_device *vrf_dev;
if (!netif_is_l3_slave(dev))
goto out;
vrf_dev = netdev_master_upper_dev_get(dev);
vrf_del_slave(vrf_dev, dev);
}
out:
return NOTIFY_DONE;
}
static struct notifier_block vrf_notifier_block __read_mostly = {
.notifier_call = vrf_device_event,
};
static int __init vrf_init_module(void)
{
int rc;
register_netdevice_notifier(&vrf_notifier_block);
rc = rtnl_link_register(&vrf_link_ops);
if (rc < 0)
goto error;
return 0;
error:
unregister_netdevice_notifier(&vrf_notifier_block);
return rc;
}
module_init(vrf_init_module);
MODULE_AUTHOR("Shrijeet Mukherjee, David Ahern");
MODULE_DESCRIPTION("Device driver to instantiate VRF domains");
MODULE_LICENSE("GPL");
MODULE_ALIAS_RTNL_LINK(DRV_NAME);
MODULE_VERSION(DRV_VERSION);