OpenCloudOS-Kernel/drivers/thunderbolt/ctl.c

1084 lines
27 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* Thunderbolt driver - control channel and configuration commands
*
* Copyright (c) 2014 Andreas Noever <andreas.noever@gmail.com>
* Copyright (C) 2018, Intel Corporation
*/
#include <linux/crc32.h>
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/dmapool.h>
#include <linux/workqueue.h>
#include "ctl.h"
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
#define TB_CTL_RX_PKG_COUNT 10
#define TB_CTL_RETRIES 1
/**
* struct tb_ctl - Thunderbolt control channel
* @nhi: Pointer to the NHI structure
* @tx: Transmit ring
* @rx: Receive ring
* @frame_pool: DMA pool for control messages
* @rx_packets: Received control messages
* @request_queue_lock: Lock protecting @request_queue
* @request_queue: List of outstanding requests
* @running: Is the control channel running at the moment
* @timeout_msec: Default timeout for non-raw control messages
* @callback: Callback called when hotplug message is received
* @callback_data: Data passed to @callback
*/
struct tb_ctl {
struct tb_nhi *nhi;
struct tb_ring *tx;
struct tb_ring *rx;
struct dma_pool *frame_pool;
struct ctl_pkg *rx_packets[TB_CTL_RX_PKG_COUNT];
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
struct mutex request_queue_lock;
struct list_head request_queue;
bool running;
int timeout_msec;
event_cb callback;
void *callback_data;
};
#define tb_ctl_WARN(ctl, format, arg...) \
dev_WARN(&(ctl)->nhi->pdev->dev, format, ## arg)
#define tb_ctl_err(ctl, format, arg...) \
dev_err(&(ctl)->nhi->pdev->dev, format, ## arg)
#define tb_ctl_warn(ctl, format, arg...) \
dev_warn(&(ctl)->nhi->pdev->dev, format, ## arg)
#define tb_ctl_info(ctl, format, arg...) \
dev_info(&(ctl)->nhi->pdev->dev, format, ## arg)
#define tb_ctl_dbg(ctl, format, arg...) \
dev_dbg(&(ctl)->nhi->pdev->dev, format, ## arg)
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
static DECLARE_WAIT_QUEUE_HEAD(tb_cfg_request_cancel_queue);
/* Serializes access to request kref_get/put */
static DEFINE_MUTEX(tb_cfg_request_lock);
/**
* tb_cfg_request_alloc() - Allocates a new config request
*
* This is refcounted object so when you are done with this, call
* tb_cfg_request_put() to it.
*/
struct tb_cfg_request *tb_cfg_request_alloc(void)
{
struct tb_cfg_request *req;
req = kzalloc(sizeof(*req), GFP_KERNEL);
if (!req)
return NULL;
kref_init(&req->kref);
return req;
}
/**
* tb_cfg_request_get() - Increase refcount of a request
* @req: Request whose refcount is increased
*/
void tb_cfg_request_get(struct tb_cfg_request *req)
{
mutex_lock(&tb_cfg_request_lock);
kref_get(&req->kref);
mutex_unlock(&tb_cfg_request_lock);
}
static void tb_cfg_request_destroy(struct kref *kref)
{
struct tb_cfg_request *req = container_of(kref, typeof(*req), kref);
kfree(req);
}
/**
* tb_cfg_request_put() - Decrease refcount and possibly release the request
* @req: Request whose refcount is decreased
*
* Call this function when you are done with the request. When refcount
* goes to %0 the object is released.
*/
void tb_cfg_request_put(struct tb_cfg_request *req)
{
mutex_lock(&tb_cfg_request_lock);
kref_put(&req->kref, tb_cfg_request_destroy);
mutex_unlock(&tb_cfg_request_lock);
}
static int tb_cfg_request_enqueue(struct tb_ctl *ctl,
struct tb_cfg_request *req)
{
WARN_ON(test_bit(TB_CFG_REQUEST_ACTIVE, &req->flags));
WARN_ON(req->ctl);
mutex_lock(&ctl->request_queue_lock);
if (!ctl->running) {
mutex_unlock(&ctl->request_queue_lock);
return -ENOTCONN;
}
req->ctl = ctl;
list_add_tail(&req->list, &ctl->request_queue);
set_bit(TB_CFG_REQUEST_ACTIVE, &req->flags);
mutex_unlock(&ctl->request_queue_lock);
return 0;
}
static void tb_cfg_request_dequeue(struct tb_cfg_request *req)
{
struct tb_ctl *ctl = req->ctl;
mutex_lock(&ctl->request_queue_lock);
list_del(&req->list);
clear_bit(TB_CFG_REQUEST_ACTIVE, &req->flags);
if (test_bit(TB_CFG_REQUEST_CANCELED, &req->flags))
wake_up(&tb_cfg_request_cancel_queue);
mutex_unlock(&ctl->request_queue_lock);
}
static bool tb_cfg_request_is_active(struct tb_cfg_request *req)
{
return test_bit(TB_CFG_REQUEST_ACTIVE, &req->flags);
}
static struct tb_cfg_request *
tb_cfg_request_find(struct tb_ctl *ctl, struct ctl_pkg *pkg)
{
struct tb_cfg_request *req;
bool found = false;
mutex_lock(&pkg->ctl->request_queue_lock);
list_for_each_entry(req, &pkg->ctl->request_queue, list) {
tb_cfg_request_get(req);
if (req->match(req, pkg)) {
found = true;
break;
}
tb_cfg_request_put(req);
}
mutex_unlock(&pkg->ctl->request_queue_lock);
return found ? req : NULL;
}
/* utility functions */
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
static int check_header(const struct ctl_pkg *pkg, u32 len,
enum tb_cfg_pkg_type type, u64 route)
{
struct tb_cfg_header *header = pkg->buffer;
/* check frame, TODO: frame flags */
if (WARN(len != pkg->frame.size,
"wrong framesize (expected %#x, got %#x)\n",
len, pkg->frame.size))
return -EIO;
if (WARN(type != pkg->frame.eof, "wrong eof (expected %#x, got %#x)\n",
type, pkg->frame.eof))
return -EIO;
if (WARN(pkg->frame.sof, "wrong sof (expected 0x0, got %#x)\n",
pkg->frame.sof))
return -EIO;
/* check header */
if (WARN(header->unknown != 1 << 9,
"header->unknown is %#x\n", header->unknown))
return -EIO;
if (WARN(route != tb_cfg_get_route(header),
"wrong route (expected %llx, got %llx)",
route, tb_cfg_get_route(header)))
return -EIO;
return 0;
}
static int check_config_address(struct tb_cfg_address addr,
enum tb_cfg_space space, u32 offset,
u32 length)
{
if (WARN(addr.zero, "addr.zero is %#x\n", addr.zero))
return -EIO;
if (WARN(space != addr.space, "wrong space (expected %x, got %x\n)",
space, addr.space))
return -EIO;
if (WARN(offset != addr.offset, "wrong offset (expected %x, got %x\n)",
offset, addr.offset))
return -EIO;
if (WARN(length != addr.length, "wrong space (expected %x, got %x\n)",
length, addr.length))
return -EIO;
/*
* We cannot check addr->port as it is set to the upstream port of the
* sender.
*/
return 0;
}
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
static struct tb_cfg_result decode_error(const struct ctl_pkg *response)
{
struct cfg_error_pkg *pkg = response->buffer;
struct tb_ctl *ctl = response->ctl;
struct tb_cfg_result res = { 0 };
res.response_route = tb_cfg_get_route(&pkg->header);
res.response_port = 0;
res.err = check_header(response, sizeof(*pkg), TB_CFG_PKG_ERROR,
tb_cfg_get_route(&pkg->header));
if (res.err)
return res;
if (pkg->zero1)
tb_ctl_warn(ctl, "pkg->zero1 is %#x\n", pkg->zero1);
if (pkg->zero2)
tb_ctl_warn(ctl, "pkg->zero2 is %#x\n", pkg->zero2);
if (pkg->zero3)
tb_ctl_warn(ctl, "pkg->zero3 is %#x\n", pkg->zero3);
res.err = 1;
res.tb_error = pkg->error;
res.response_port = pkg->port;
return res;
}
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
static struct tb_cfg_result parse_header(const struct ctl_pkg *pkg, u32 len,
enum tb_cfg_pkg_type type, u64 route)
{
struct tb_cfg_header *header = pkg->buffer;
struct tb_cfg_result res = { 0 };
if (pkg->frame.eof == TB_CFG_PKG_ERROR)
return decode_error(pkg);
res.response_port = 0; /* will be updated later for cfg_read/write */
res.response_route = tb_cfg_get_route(header);
res.err = check_header(pkg, len, type, route);
return res;
}
static void tb_cfg_print_error(struct tb_ctl *ctl,
const struct tb_cfg_result *res)
{
WARN_ON(res->err != 1);
switch (res->tb_error) {
case TB_CFG_ERROR_PORT_NOT_CONNECTED:
/* Port is not connected. This can happen during surprise
* removal. Do not warn. */
return;
case TB_CFG_ERROR_INVALID_CONFIG_SPACE:
/*
* Invalid cfg_space/offset/length combination in
* cfg_read/cfg_write.
*/
tb_ctl_dbg(ctl, "%llx:%x: invalid config space or offset\n",
res->response_route, res->response_port);
return;
case TB_CFG_ERROR_NO_SUCH_PORT:
/*
* - The route contains a non-existent port.
* - The route contains a non-PHY port (e.g. PCIe).
* - The port in cfg_read/cfg_write does not exist.
*/
tb_ctl_WARN(ctl, "CFG_ERROR(%llx:%x): Invalid port\n",
res->response_route, res->response_port);
return;
case TB_CFG_ERROR_LOOP:
tb_ctl_WARN(ctl, "CFG_ERROR(%llx:%x): Route contains a loop\n",
res->response_route, res->response_port);
return;
case TB_CFG_ERROR_LOCK:
tb_ctl_warn(ctl, "%llx:%x: downstream port is locked\n",
res->response_route, res->response_port);
return;
default:
/* 5,6,7,9 and 11 are also valid error codes */
tb_ctl_WARN(ctl, "CFG_ERROR(%llx:%x): Unknown error\n",
res->response_route, res->response_port);
return;
}
}
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
static __be32 tb_crc(const void *data, size_t len)
{
return cpu_to_be32(~__crc32c_le(~0, data, len));
}
static void tb_ctl_pkg_free(struct ctl_pkg *pkg)
{
if (pkg) {
dma_pool_free(pkg->ctl->frame_pool,
pkg->buffer, pkg->frame.buffer_phy);
kfree(pkg);
}
}
static struct ctl_pkg *tb_ctl_pkg_alloc(struct tb_ctl *ctl)
{
struct ctl_pkg *pkg = kzalloc(sizeof(*pkg), GFP_KERNEL);
if (!pkg)
return NULL;
pkg->ctl = ctl;
pkg->buffer = dma_pool_alloc(ctl->frame_pool, GFP_KERNEL,
&pkg->frame.buffer_phy);
if (!pkg->buffer) {
kfree(pkg);
return NULL;
}
return pkg;
}
/* RX/TX handling */
static void tb_ctl_tx_callback(struct tb_ring *ring, struct ring_frame *frame,
bool canceled)
{
struct ctl_pkg *pkg = container_of(frame, typeof(*pkg), frame);
tb_ctl_pkg_free(pkg);
}
thunderbolt: ctl: Demote non-conformant kernel-doc headers Fixes the following W=1 kernel build warning(s): drivers/thunderbolt/ctl.c:38: warning: expecting prototype for struct tb_cfg. Prototype was for struct tb_ctl instead drivers/thunderbolt/ctl.c:350: warning: Function parameter or member 'ctl' not described in 'tb_ctl_tx' drivers/thunderbolt/ctl.c:350: warning: Function parameter or member 'data' not described in 'tb_ctl_tx' drivers/thunderbolt/ctl.c:350: warning: Function parameter or member 'len' not described in 'tb_ctl_tx' drivers/thunderbolt/ctl.c:350: warning: Function parameter or member 'type' not described in 'tb_ctl_tx' drivers/thunderbolt/ctl.c:350: warning: expecting prototype for tb_cfg_tx(). Prototype was for tb_ctl_tx() instead drivers/thunderbolt/ctl.c:383: warning: Function parameter or member 'ctl' not described in 'tb_ctl_handle_event' drivers/thunderbolt/ctl.c:383: warning: Function parameter or member 'type' not described in 'tb_ctl_handle_event' drivers/thunderbolt/ctl.c:383: warning: Function parameter or member 'pkg' not described in 'tb_ctl_handle_event' drivers/thunderbolt/ctl.c:383: warning: Function parameter or member 'size' not described in 'tb_ctl_handle_event' Cc: Andreas Noever <andreas.noever@gmail.com> Cc: Michael Jamet <michael.jamet@intel.com> Cc: Yehezkel Bernat <YehezkelShB@gmail.com> Cc: linux-usb@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> [ mw: Demote only static functions ] Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-01-27 19:25:45 +08:00
/*
* tb_cfg_tx() - transmit a packet on the control channel
*
* len must be a multiple of four.
*
* Return: Returns 0 on success or an error code on failure.
*/
static int tb_ctl_tx(struct tb_ctl *ctl, const void *data, size_t len,
enum tb_cfg_pkg_type type)
{
int res;
struct ctl_pkg *pkg;
if (len % 4 != 0) { /* required for le->be conversion */
tb_ctl_WARN(ctl, "TX: invalid size: %zu\n", len);
return -EINVAL;
}
if (len > TB_FRAME_SIZE - 4) { /* checksum is 4 bytes */
tb_ctl_WARN(ctl, "TX: packet too large: %zu/%d\n",
len, TB_FRAME_SIZE - 4);
return -EINVAL;
}
pkg = tb_ctl_pkg_alloc(ctl);
if (!pkg)
return -ENOMEM;
pkg->frame.callback = tb_ctl_tx_callback;
pkg->frame.size = len + 4;
pkg->frame.sof = type;
pkg->frame.eof = type;
cpu_to_be32_array(pkg->buffer, data, len / 4);
*(__be32 *) (pkg->buffer + len) = tb_crc(pkg->buffer, len);
res = tb_ring_tx(ctl->tx, &pkg->frame);
if (res) /* ring is stopped */
tb_ctl_pkg_free(pkg);
return res;
}
thunderbolt: ctl: Demote non-conformant kernel-doc headers Fixes the following W=1 kernel build warning(s): drivers/thunderbolt/ctl.c:38: warning: expecting prototype for struct tb_cfg. Prototype was for struct tb_ctl instead drivers/thunderbolt/ctl.c:350: warning: Function parameter or member 'ctl' not described in 'tb_ctl_tx' drivers/thunderbolt/ctl.c:350: warning: Function parameter or member 'data' not described in 'tb_ctl_tx' drivers/thunderbolt/ctl.c:350: warning: Function parameter or member 'len' not described in 'tb_ctl_tx' drivers/thunderbolt/ctl.c:350: warning: Function parameter or member 'type' not described in 'tb_ctl_tx' drivers/thunderbolt/ctl.c:350: warning: expecting prototype for tb_cfg_tx(). Prototype was for tb_ctl_tx() instead drivers/thunderbolt/ctl.c:383: warning: Function parameter or member 'ctl' not described in 'tb_ctl_handle_event' drivers/thunderbolt/ctl.c:383: warning: Function parameter or member 'type' not described in 'tb_ctl_handle_event' drivers/thunderbolt/ctl.c:383: warning: Function parameter or member 'pkg' not described in 'tb_ctl_handle_event' drivers/thunderbolt/ctl.c:383: warning: Function parameter or member 'size' not described in 'tb_ctl_handle_event' Cc: Andreas Noever <andreas.noever@gmail.com> Cc: Michael Jamet <michael.jamet@intel.com> Cc: Yehezkel Bernat <YehezkelShB@gmail.com> Cc: linux-usb@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> [ mw: Demote only static functions ] Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-01-27 19:25:45 +08:00
/*
* tb_ctl_handle_event() - acknowledge a plug event, invoke ctl->callback
*/
thunderbolt: Add support for XDomain discovery protocol When two hosts are connected over a Thunderbolt cable, there is a protocol they can use to communicate capabilities supported by the host. The discovery protocol uses automatically configured control channel (ring 0) and is build on top of request/response transactions using special XDomain primitives provided by the Thunderbolt base protocol. The capabilities consists of a root directory block of basic properties used for identification of the host, and then there can be zero or more directories each describing a Thunderbolt service and its capabilities. Once both sides have discovered what is supported the two hosts can setup high-speed DMA paths and transfer data to the other side using whatever protocol was agreed based on the properties. The software protocol used to communicate which DMA paths to enable is service specific. This patch adds support for the XDomain discovery protocol to the Thunderbolt bus. We model each remote host connection as a Linux XDomain device. For each Thunderbolt service found supported on the XDomain device, we create Linux Thunderbolt service device which Thunderbolt service drivers can then bind to based on the protocol identification information retrieved from the property directory describing the service. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02 18:38:34 +08:00
static bool tb_ctl_handle_event(struct tb_ctl *ctl, enum tb_cfg_pkg_type type,
struct ctl_pkg *pkg, size_t size)
{
thunderbolt: Add support for XDomain discovery protocol When two hosts are connected over a Thunderbolt cable, there is a protocol they can use to communicate capabilities supported by the host. The discovery protocol uses automatically configured control channel (ring 0) and is build on top of request/response transactions using special XDomain primitives provided by the Thunderbolt base protocol. The capabilities consists of a root directory block of basic properties used for identification of the host, and then there can be zero or more directories each describing a Thunderbolt service and its capabilities. Once both sides have discovered what is supported the two hosts can setup high-speed DMA paths and transfer data to the other side using whatever protocol was agreed based on the properties. The software protocol used to communicate which DMA paths to enable is service specific. This patch adds support for the XDomain discovery protocol to the Thunderbolt bus. We model each remote host connection as a Linux XDomain device. For each Thunderbolt service found supported on the XDomain device, we create Linux Thunderbolt service device which Thunderbolt service drivers can then bind to based on the protocol identification information retrieved from the property directory describing the service. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02 18:38:34 +08:00
return ctl->callback(ctl->callback_data, type, pkg->buffer, size);
}
static void tb_ctl_rx_submit(struct ctl_pkg *pkg)
{
tb_ring_rx(pkg->ctl->rx, &pkg->frame); /*
* We ignore failures during stop.
* All rx packets are referenced
* from ctl->rx_packets, so we do
* not loose them.
*/
}
static int tb_async_error(const struct ctl_pkg *pkg)
{
const struct cfg_error_pkg *error = (const struct cfg_error_pkg *)pkg;
if (pkg->frame.eof != TB_CFG_PKG_ERROR)
return false;
switch (error->error) {
case TB_CFG_ERROR_LINK_ERROR:
case TB_CFG_ERROR_HEC_ERROR_DETECTED:
case TB_CFG_ERROR_FLOW_CONTROL_ERROR:
return true;
default:
return false;
}
}
static void tb_ctl_rx_callback(struct tb_ring *ring, struct ring_frame *frame,
bool canceled)
{
struct ctl_pkg *pkg = container_of(frame, typeof(*pkg), frame);
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
struct tb_cfg_request *req;
__be32 crc32;
if (canceled)
return; /*
* ring is stopped, packet is referenced from
* ctl->rx_packets.
*/
if (frame->size < 4 || frame->size % 4 != 0) {
tb_ctl_err(pkg->ctl, "RX: invalid size %#x, dropping packet\n",
frame->size);
goto rx;
}
frame->size -= 4; /* remove checksum */
crc32 = tb_crc(pkg->buffer, frame->size);
be32_to_cpu_array(pkg->buffer, pkg->buffer, frame->size / 4);
switch (frame->eof) {
case TB_CFG_PKG_READ:
case TB_CFG_PKG_WRITE:
case TB_CFG_PKG_ERROR:
case TB_CFG_PKG_OVERRIDE:
case TB_CFG_PKG_RESET:
if (*(__be32 *)(pkg->buffer + frame->size) != crc32) {
tb_ctl_err(pkg->ctl,
"RX: checksum mismatch, dropping packet\n");
goto rx;
}
if (tb_async_error(pkg)) {
tb_ctl_handle_event(pkg->ctl, frame->eof,
pkg, frame->size);
goto rx;
}
break;
case TB_CFG_PKG_EVENT:
thunderbolt: Add support for XDomain discovery protocol When two hosts are connected over a Thunderbolt cable, there is a protocol they can use to communicate capabilities supported by the host. The discovery protocol uses automatically configured control channel (ring 0) and is build on top of request/response transactions using special XDomain primitives provided by the Thunderbolt base protocol. The capabilities consists of a root directory block of basic properties used for identification of the host, and then there can be zero or more directories each describing a Thunderbolt service and its capabilities. Once both sides have discovered what is supported the two hosts can setup high-speed DMA paths and transfer data to the other side using whatever protocol was agreed based on the properties. The software protocol used to communicate which DMA paths to enable is service specific. This patch adds support for the XDomain discovery protocol to the Thunderbolt bus. We model each remote host connection as a Linux XDomain device. For each Thunderbolt service found supported on the XDomain device, we create Linux Thunderbolt service device which Thunderbolt service drivers can then bind to based on the protocol identification information retrieved from the property directory describing the service. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02 18:38:34 +08:00
case TB_CFG_PKG_XDOMAIN_RESP:
case TB_CFG_PKG_XDOMAIN_REQ:
if (*(__be32 *)(pkg->buffer + frame->size) != crc32) {
tb_ctl_err(pkg->ctl,
"RX: checksum mismatch, dropping packet\n");
goto rx;
}
fallthrough;
thunderbolt: Add support for Internal Connection Manager (ICM) Starting from Intel Falcon Ridge the internal connection manager running on the Thunderbolt host controller has been supporting 4 security levels. One reason for this is to prevent DMA attacks and only allow connecting devices the user trusts. The internal connection manager (ICM) is the preferred way of connecting Thunderbolt devices over software only implementation typically used on Macs. The driver communicates with ICM using special Thunderbolt ring 0 (control channel) messages. In order to handle these messages we add support for the ICM messages to the control channel. The security levels are as follows: none - No security, all tunnels are created automatically user - User needs to approve the device before tunnels are created secure - User need to approve the device before tunnels are created. The device is sent a challenge on future connects to be able to verify it is actually the approved device. dponly - Only Display Port and USB tunnels can be created and those are created automatically. The security levels are typically configurable from the system BIOS and by default it is set to "user" on many systems. In this patch each Thunderbolt device will have either one or two new sysfs attributes: authorized and key. The latter appears for devices that support secure connect. In order to identify the device the user can read identication information, including UUID and name of the device from sysfs and based on that make a decision to authorize the device. The device is authorized by simply writing 1 to the "authorized" sysfs attribute. This is following the USB bus device authorization mechanism. The secure connect requires an additional challenge step (writing 2 to the "authorized" attribute) in future connects when the key has already been stored to the NVM of the device. Non-ICM systems (before Alpine Ridge) continue to use the existing functionality and the security level is set to none. For systems with Alpine Ridge, even on Apple hardware, we will use ICM. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:16 +08:00
case TB_CFG_PKG_ICM_EVENT:
thunderbolt: Add support for XDomain discovery protocol When two hosts are connected over a Thunderbolt cable, there is a protocol they can use to communicate capabilities supported by the host. The discovery protocol uses automatically configured control channel (ring 0) and is build on top of request/response transactions using special XDomain primitives provided by the Thunderbolt base protocol. The capabilities consists of a root directory block of basic properties used for identification of the host, and then there can be zero or more directories each describing a Thunderbolt service and its capabilities. Once both sides have discovered what is supported the two hosts can setup high-speed DMA paths and transfer data to the other side using whatever protocol was agreed based on the properties. The software protocol used to communicate which DMA paths to enable is service specific. This patch adds support for the XDomain discovery protocol to the Thunderbolt bus. We model each remote host connection as a Linux XDomain device. For each Thunderbolt service found supported on the XDomain device, we create Linux Thunderbolt service device which Thunderbolt service drivers can then bind to based on the protocol identification information retrieved from the property directory describing the service. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02 18:38:34 +08:00
if (tb_ctl_handle_event(pkg->ctl, frame->eof, pkg, frame->size))
goto rx;
break;
default:
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
break;
}
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
/*
* The received packet will be processed only if there is an
* active request and that the packet is what is expected. This
* prevents packets such as replies coming after timeout has
* triggered from messing with the active requests.
*/
req = tb_cfg_request_find(pkg->ctl, pkg);
if (req) {
if (req->copy(req, pkg))
schedule_work(&req->work);
tb_cfg_request_put(req);
}
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
rx:
tb_ctl_rx_submit(pkg);
}
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
static void tb_cfg_request_work(struct work_struct *work)
{
struct tb_cfg_request *req = container_of(work, typeof(*req), work);
if (!test_bit(TB_CFG_REQUEST_CANCELED, &req->flags))
req->callback(req->callback_data);
tb_cfg_request_dequeue(req);
tb_cfg_request_put(req);
}
/**
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
* tb_cfg_request() - Start control request not waiting for it to complete
* @ctl: Control channel to use
* @req: Request to start
* @callback: Callback called when the request is completed
* @callback_data: Data to be passed to @callback
*
* This queues @req on the given control channel without waiting for it
* to complete. When the request completes @callback is called.
*/
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
int tb_cfg_request(struct tb_ctl *ctl, struct tb_cfg_request *req,
void (*callback)(void *), void *callback_data)
{
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
int ret;
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
req->flags = 0;
req->callback = callback;
req->callback_data = callback_data;
INIT_WORK(&req->work, tb_cfg_request_work);
INIT_LIST_HEAD(&req->list);
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
tb_cfg_request_get(req);
ret = tb_cfg_request_enqueue(ctl, req);
if (ret)
goto err_put;
ret = tb_ctl_tx(ctl, req->request, req->request_size,
req->request_type);
if (ret)
goto err_dequeue;
if (!req->response)
schedule_work(&req->work);
return 0;
err_dequeue:
tb_cfg_request_dequeue(req);
err_put:
tb_cfg_request_put(req);
return ret;
}
/**
* tb_cfg_request_cancel() - Cancel a control request
* @req: Request to cancel
* @err: Error to assign to the request
*
* This function can be used to cancel ongoing request. It will wait
* until the request is not active anymore.
*/
void tb_cfg_request_cancel(struct tb_cfg_request *req, int err)
{
set_bit(TB_CFG_REQUEST_CANCELED, &req->flags);
schedule_work(&req->work);
wait_event(tb_cfg_request_cancel_queue, !tb_cfg_request_is_active(req));
req->result.err = err;
}
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
static void tb_cfg_request_complete(void *data)
{
complete(data);
}
/**
* tb_cfg_request_sync() - Start control request and wait until it completes
* @ctl: Control channel to use
* @req: Request to start
* @timeout_msec: Timeout how long to wait @req to complete
*
* Starts a control request and waits until it completes. If timeout
* triggers the request is canceled before function returns. Note the
* caller needs to make sure only one message for given switch is active
* at a time.
*/
struct tb_cfg_result tb_cfg_request_sync(struct tb_ctl *ctl,
struct tb_cfg_request *req,
int timeout_msec)
{
unsigned long timeout = msecs_to_jiffies(timeout_msec);
struct tb_cfg_result res = { 0 };
DECLARE_COMPLETION_ONSTACK(done);
int ret;
ret = tb_cfg_request(ctl, req, tb_cfg_request_complete, &done);
if (ret) {
res.err = ret;
return res;
}
if (!wait_for_completion_timeout(&done, timeout))
tb_cfg_request_cancel(req, -ETIMEDOUT);
flush_work(&req->work);
return req->result;
}
/* public interface, alloc/start/stop/free */
/**
* tb_ctl_alloc() - allocate a control channel
* @nhi: Pointer to NHI
* @timeout_msec: Default timeout used with non-raw control messages
* @cb: Callback called for plug events
* @cb_data: Data passed to @cb
*
* cb will be invoked once for every hot plug event.
*
* Return: Returns a pointer on success or NULL on failure.
*/
struct tb_ctl *tb_ctl_alloc(struct tb_nhi *nhi, int timeout_msec, event_cb cb,
void *cb_data)
{
int i;
struct tb_ctl *ctl = kzalloc(sizeof(*ctl), GFP_KERNEL);
if (!ctl)
return NULL;
ctl->nhi = nhi;
ctl->timeout_msec = timeout_msec;
ctl->callback = cb;
ctl->callback_data = cb_data;
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
mutex_init(&ctl->request_queue_lock);
INIT_LIST_HEAD(&ctl->request_queue);
ctl->frame_pool = dma_pool_create("thunderbolt_ctl", &nhi->pdev->dev,
TB_FRAME_SIZE, 4, 0);
if (!ctl->frame_pool)
goto err;
ctl->tx = tb_ring_alloc_tx(nhi, 0, 10, RING_FLAG_NO_SUSPEND);
if (!ctl->tx)
goto err;
ctl->rx = tb_ring_alloc_rx(nhi, 0, 10, RING_FLAG_NO_SUSPEND, 0, 0xffff,
0xffff, NULL, NULL);
if (!ctl->rx)
goto err;
for (i = 0; i < TB_CTL_RX_PKG_COUNT; i++) {
ctl->rx_packets[i] = tb_ctl_pkg_alloc(ctl);
if (!ctl->rx_packets[i])
goto err;
ctl->rx_packets[i]->frame.callback = tb_ctl_rx_callback;
}
tb_ctl_dbg(ctl, "control channel created\n");
return ctl;
err:
tb_ctl_free(ctl);
return NULL;
}
/**
* tb_ctl_free() - free a control channel
* @ctl: Control channel to free
*
* Must be called after tb_ctl_stop.
*
* Must NOT be called from ctl->callback.
*/
void tb_ctl_free(struct tb_ctl *ctl)
{
int i;
if (!ctl)
return;
if (ctl->rx)
tb_ring_free(ctl->rx);
if (ctl->tx)
tb_ring_free(ctl->tx);
/* free RX packets */
for (i = 0; i < TB_CTL_RX_PKG_COUNT; i++)
tb_ctl_pkg_free(ctl->rx_packets[i]);
dma_pool_destroy(ctl->frame_pool);
kfree(ctl);
}
/**
* tb_cfg_start() - start/resume the control channel
* @ctl: Control channel to start
*/
void tb_ctl_start(struct tb_ctl *ctl)
{
int i;
tb_ctl_dbg(ctl, "control channel starting...\n");
tb_ring_start(ctl->tx); /* is used to ack hotplug packets, start first */
tb_ring_start(ctl->rx);
for (i = 0; i < TB_CTL_RX_PKG_COUNT; i++)
tb_ctl_rx_submit(ctl->rx_packets[i]);
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
ctl->running = true;
}
/**
* tb_ctrl_stop() - pause the control channel
* @ctl: Control channel to stop
*
* All invocations of ctl->callback will have finished after this method
* returns.
*
* Must NOT be called from ctl->callback.
*/
void tb_ctl_stop(struct tb_ctl *ctl)
{
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
mutex_lock(&ctl->request_queue_lock);
ctl->running = false;
mutex_unlock(&ctl->request_queue_lock);
tb_ring_stop(ctl->rx);
tb_ring_stop(ctl->tx);
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
if (!list_empty(&ctl->request_queue))
tb_ctl_WARN(ctl, "dangling request in request_queue\n");
INIT_LIST_HEAD(&ctl->request_queue);
tb_ctl_dbg(ctl, "control channel stopped\n");
}
/* public interface, commands */
/**
* tb_cfg_ack_plug() - Ack hot plug/unplug event
* @ctl: Control channel to use
* @route: Router that originated the event
* @port: Port where the hot plug/unplug happened
* @unplug: Ack hot plug or unplug
*
* Call this as response for hot plug/unplug event to ack it.
* Returns %0 on success or an error code on failure.
*/
int tb_cfg_ack_plug(struct tb_ctl *ctl, u64 route, u32 port, bool unplug)
{
struct cfg_error_pkg pkg = {
.header = tb_cfg_make_header(route),
.port = port,
.error = TB_CFG_ERROR_ACK_PLUG_EVENT,
.pg = unplug ? TB_CFG_ERROR_PG_HOT_UNPLUG
: TB_CFG_ERROR_PG_HOT_PLUG,
};
tb_ctl_dbg(ctl, "acking hot %splug event on %llx:%x\n",
unplug ? "un" : "", route, port);
return tb_ctl_tx(ctl, &pkg, sizeof(pkg), TB_CFG_PKG_ERROR);
}
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
static bool tb_cfg_match(const struct tb_cfg_request *req,
const struct ctl_pkg *pkg)
{
u64 route = tb_cfg_get_route(pkg->buffer) & ~BIT_ULL(63);
if (pkg->frame.eof == TB_CFG_PKG_ERROR)
return true;
if (pkg->frame.eof != req->response_type)
return false;
if (route != tb_cfg_get_route(req->request))
return false;
if (pkg->frame.size != req->response_size)
return false;
if (pkg->frame.eof == TB_CFG_PKG_READ ||
pkg->frame.eof == TB_CFG_PKG_WRITE) {
const struct cfg_read_pkg *req_hdr = req->request;
const struct cfg_read_pkg *res_hdr = pkg->buffer;
if (req_hdr->addr.seq != res_hdr->addr.seq)
return false;
}
return true;
}
static bool tb_cfg_copy(struct tb_cfg_request *req, const struct ctl_pkg *pkg)
{
struct tb_cfg_result res;
/* Now make sure it is in expected format */
res = parse_header(pkg, req->response_size, req->response_type,
tb_cfg_get_route(req->request));
if (!res.err)
memcpy(req->response, pkg->buffer, req->response_size);
req->result = res;
/* Always complete when first response is received */
return true;
}
/**
* tb_cfg_reset() - send a reset packet and wait for a response
* @ctl: Control channel pointer
* @route: Router string for the router to send reset
*
* If the switch at route is incorrectly configured then we will not receive a
* reply (even though the switch will reset). The caller should check for
* -ETIMEDOUT and attempt to reconfigure the switch.
*/
struct tb_cfg_result tb_cfg_reset(struct tb_ctl *ctl, u64 route)
{
struct cfg_reset_pkg request = { .header = tb_cfg_make_header(route) };
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
struct tb_cfg_result res = { 0 };
struct tb_cfg_header reply;
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
struct tb_cfg_request *req;
req = tb_cfg_request_alloc();
if (!req) {
res.err = -ENOMEM;
return res;
}
req->match = tb_cfg_match;
req->copy = tb_cfg_copy;
req->request = &request;
req->request_size = sizeof(request);
req->request_type = TB_CFG_PKG_RESET;
req->response = &reply;
req->response_size = sizeof(reply);
req->response_type = TB_CFG_PKG_RESET;
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
res = tb_cfg_request_sync(ctl, req, ctl->timeout_msec);
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
tb_cfg_request_put(req);
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
return res;
}
/**
* tb_cfg_read_raw() - read from config space into buffer
* @ctl: Pointer to the control channel
* @buffer: Buffer where the data is read
* @route: Route string of the router
* @port: Port number when reading from %TB_CFG_PORT, %0 otherwise
* @space: Config space selector
* @offset: Dword word offset of the register to start reading
* @length: Number of dwords to read
* @timeout_msec: Timeout in ms how long to wait for the response
*
* Reads from router config space without translating the possible error.
*/
struct tb_cfg_result tb_cfg_read_raw(struct tb_ctl *ctl, void *buffer,
u64 route, u32 port, enum tb_cfg_space space,
u32 offset, u32 length, int timeout_msec)
{
struct tb_cfg_result res = { 0 };
struct cfg_read_pkg request = {
.header = tb_cfg_make_header(route),
.addr = {
.port = port,
.space = space,
.offset = offset,
.length = length,
},
};
struct cfg_write_pkg reply;
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
int retries = 0;
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
while (retries < TB_CTL_RETRIES) {
struct tb_cfg_request *req;
req = tb_cfg_request_alloc();
if (!req) {
res.err = -ENOMEM;
return res;
}
request.addr.seq = retries++;
req->match = tb_cfg_match;
req->copy = tb_cfg_copy;
req->request = &request;
req->request_size = sizeof(request);
req->request_type = TB_CFG_PKG_READ;
req->response = &reply;
req->response_size = 12 + 4 * length;
req->response_type = TB_CFG_PKG_READ;
res = tb_cfg_request_sync(ctl, req, timeout_msec);
tb_cfg_request_put(req);
if (res.err != -ETIMEDOUT)
break;
/* Wait a bit (arbitrary time) until we send a retry */
usleep_range(10, 100);
}
if (res.err)
return res;
res.response_port = reply.addr.port;
res.err = check_config_address(reply.addr, space, offset, length);
if (!res.err)
memcpy(buffer, &reply.data, 4 * length);
return res;
}
/**
* tb_cfg_write() - write from buffer into config space
* @ctl: Pointer to the control channel
* @buffer: Data to write
* @route: Route string of the router
* @port: Port number when writing to %TB_CFG_PORT, %0 otherwise
* @space: Config space selector
* @offset: Dword word offset of the register to start writing
* @length: Number of dwords to write
* @timeout_msec: Timeout in ms how long to wait for the response
*
* Writes to router config space without translating the possible error.
*/
struct tb_cfg_result tb_cfg_write_raw(struct tb_ctl *ctl, const void *buffer,
u64 route, u32 port, enum tb_cfg_space space,
u32 offset, u32 length, int timeout_msec)
{
struct tb_cfg_result res = { 0 };
struct cfg_write_pkg request = {
.header = tb_cfg_make_header(route),
.addr = {
.port = port,
.space = space,
.offset = offset,
.length = length,
},
};
struct cfg_read_pkg reply;
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
int retries = 0;
memcpy(&request.data, buffer, length * 4);
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
while (retries < TB_CTL_RETRIES) {
struct tb_cfg_request *req;
req = tb_cfg_request_alloc();
if (!req) {
res.err = -ENOMEM;
return res;
}
request.addr.seq = retries++;
req->match = tb_cfg_match;
req->copy = tb_cfg_copy;
req->request = &request;
req->request_size = 12 + 4 * length;
req->request_type = TB_CFG_PKG_WRITE;
req->response = &reply;
req->response_size = sizeof(reply);
req->response_type = TB_CFG_PKG_WRITE;
res = tb_cfg_request_sync(ctl, req, timeout_msec);
tb_cfg_request_put(req);
if (res.err != -ETIMEDOUT)
break;
/* Wait a bit (arbitrary time) until we send a retry */
usleep_range(10, 100);
}
if (res.err)
return res;
res.response_port = reply.addr.port;
res.err = check_config_address(reply.addr, space, offset, length);
return res;
}
static int tb_cfg_get_error(struct tb_ctl *ctl, enum tb_cfg_space space,
const struct tb_cfg_result *res)
{
/*
* For unimplemented ports access to port config space may return
* TB_CFG_ERROR_INVALID_CONFIG_SPACE (alternatively their type is
* set to TB_TYPE_INACTIVE). In the former case return -ENODEV so
* that the caller can mark the port as disabled.
*/
if (space == TB_CFG_PORT &&
res->tb_error == TB_CFG_ERROR_INVALID_CONFIG_SPACE)
return -ENODEV;
tb_cfg_print_error(ctl, res);
if (res->tb_error == TB_CFG_ERROR_LOCK)
return -EACCES;
else if (res->tb_error == TB_CFG_ERROR_PORT_NOT_CONNECTED)
return -ENOTCONN;
return -EIO;
}
int tb_cfg_read(struct tb_ctl *ctl, void *buffer, u64 route, u32 port,
enum tb_cfg_space space, u32 offset, u32 length)
{
struct tb_cfg_result res = tb_cfg_read_raw(ctl, buffer, route, port,
space, offset, length, ctl->timeout_msec);
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
switch (res.err) {
case 0:
/* Success */
break;
case 1:
/* Thunderbolt error, tb_error holds the actual number */
return tb_cfg_get_error(ctl, space, &res);
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
case -ETIMEDOUT:
tb_ctl_warn(ctl, "%llx: timeout reading config space %u from %#x\n",
route, space, offset);
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
break;
default:
WARN(1, "tb_cfg_read: %d\n", res.err);
break;
}
return res.err;
}
int tb_cfg_write(struct tb_ctl *ctl, const void *buffer, u64 route, u32 port,
enum tb_cfg_space space, u32 offset, u32 length)
{
struct tb_cfg_result res = tb_cfg_write_raw(ctl, buffer, route, port,
space, offset, length, ctl->timeout_msec);
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
switch (res.err) {
case 0:
/* Success */
break;
case 1:
/* Thunderbolt error, tb_error holds the actual number */
return tb_cfg_get_error(ctl, space, &res);
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
case -ETIMEDOUT:
tb_ctl_warn(ctl, "%llx: timeout writing config space %u to %#x\n",
route, space, offset);
thunderbolt: Rework control channel to be more reliable If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06 20:25:10 +08:00
break;
default:
WARN(1, "tb_cfg_write: %d\n", res.err);
break;
}
return res.err;
}
/**
* tb_cfg_get_upstream_port() - get upstream port number of switch at route
* @ctl: Pointer to the control channel
* @route: Route string of the router
*
* Reads the first dword from the switches TB_CFG_SWITCH config area and
* returns the port number from which the reply originated.
*
* Return: Returns the upstream port number on success or an error code on
* failure.
*/
int tb_cfg_get_upstream_port(struct tb_ctl *ctl, u64 route)
{
u32 dummy;
struct tb_cfg_result res = tb_cfg_read_raw(ctl, &dummy, route, 0,
TB_CFG_SWITCH, 0, 1,
ctl->timeout_msec);
if (res.err == 1)
return -EIO;
if (res.err)
return res.err;
return res.response_port;
}