OpenCloudOS-Kernel/net/ipv6/mcast.c

3023 lines
71 KiB
C
Raw Normal View History

/*
* Multicast support for IPv6
* Linux INET6 implementation
*
* Authors:
* Pedro Roque <roque@di.fc.ul.pt>
*
* Based on linux/ipv4/igmp.c and linux/ipv4/ip_sockglue.c
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
/* Changes:
*
* yoshfuji : fix format of router-alert option
* YOSHIFUJI Hideaki @USAGI:
* Fixed source address for MLD message based on
* <draft-ietf-magma-mld-source-05.txt>.
* YOSHIFUJI Hideaki @USAGI:
* - Ignore Queries for invalid addresses.
* - MLD for link-local addresses.
* David L Stevens <dlstevens@us.ibm.com>:
* - MLDv2 support
*/
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/socket.h>
#include <linux/sockios.h>
#include <linux/jiffies.h>
#include <linux/times.h>
#include <linux/net.h>
#include <linux/in.h>
#include <linux/in6.h>
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/route.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/pkt_sched.h>
#include <net/mld.h>
#include <linux/netfilter.h>
#include <linux/netfilter_ipv6.h>
#include <net/net_namespace.h>
#include <net/sock.h>
#include <net/snmp.h>
#include <net/ipv6.h>
#include <net/protocol.h>
#include <net/if_inet6.h>
#include <net/ndisc.h>
#include <net/addrconf.h>
#include <net/ip6_route.h>
#include <net/inet_common.h>
#include <net/ip6_checksum.h>
/* Ensure that we have struct in6_addr aligned on 32bit word. */
static void *__mld2_query_bugs[] __attribute__((__unused__)) = {
BUILD_BUG_ON_NULL(offsetof(struct mld2_query, mld2q_srcs) % 4),
BUILD_BUG_ON_NULL(offsetof(struct mld2_report, mld2r_grec) % 4),
BUILD_BUG_ON_NULL(offsetof(struct mld2_grec, grec_mca) % 4)
};
static struct in6_addr mld2_all_mcr = MLD2_ALL_MCR_INIT;
static void igmp6_join_group(struct ifmcaddr6 *ma);
static void igmp6_leave_group(struct ifmcaddr6 *ma);
static void igmp6_timer_handler(unsigned long data);
static void mld_gq_timer_expire(unsigned long data);
static void mld_ifc_timer_expire(unsigned long data);
static void mld_ifc_event(struct inet6_dev *idev);
static void mld_add_delrec(struct inet6_dev *idev, struct ifmcaddr6 *pmc);
static void mld_del_delrec(struct inet6_dev *idev, struct ifmcaddr6 *pmc);
static void mld_clear_delrec(struct inet6_dev *idev);
static bool mld_in_v1_mode(const struct inet6_dev *idev);
static int sf_setstate(struct ifmcaddr6 *pmc);
static void sf_markstate(struct ifmcaddr6 *pmc);
static void ip6_mc_clear_src(struct ifmcaddr6 *pmc);
static int ip6_mc_del_src(struct inet6_dev *idev, const struct in6_addr *pmca,
int sfmode, int sfcount, const struct in6_addr *psfsrc,
int delta);
static int ip6_mc_add_src(struct inet6_dev *idev, const struct in6_addr *pmca,
int sfmode, int sfcount, const struct in6_addr *psfsrc,
int delta);
static int ip6_mc_leave_src(struct sock *sk, struct ipv6_mc_socklist *iml,
struct inet6_dev *idev);
#define MLD_QRV_DEFAULT 2
net: ipv6: mld: fix v1/v2 switchback timeout to rfc3810, 9.12. i) RFC3810, 9.2. Query Interval [QI] says: The Query Interval variable denotes the interval between General Queries sent by the Querier. Default value: 125 seconds. [...] ii) RFC3810, 9.3. Query Response Interval [QRI] says: The Maximum Response Delay used to calculate the Maximum Response Code inserted into the periodic General Queries. Default value: 10000 (10 seconds) [...] The number of seconds represented by the [Query Response Interval] must be less than the [Query Interval]. iii) RFC3810, 9.12. Older Version Querier Present Timeout [OVQPT] says: The Older Version Querier Present Timeout is the time-out for transitioning a host back to MLDv2 Host Compatibility Mode. When an MLDv1 query is received, MLDv2 hosts set their Older Version Querier Present Timer to [Older Version Querier Present Timeout]. This value MUST be ([Robustness Variable] times (the [Query Interval] in the last Query received)) plus ([Query Response Interval]). Hence, on *default* the timeout results in: [RV] = 2, [QI] = 125sec, [QRI] = 10sec [OVQPT] = [RV] * [QI] + [QRI] = 260sec Having that said, we currently calculate [OVQPT] (here given as 'switchback' variable) as ... switchback = (idev->mc_qrv + 1) * max_delay RFC3810, 9.12. says "the [Query Interval] in the last Query received". In section "9.14. Configuring timers", it is said: This section is meant to provide advice to network administrators on how to tune these settings to their network. Ambitious router implementations might tune these settings dynamically based upon changing characteristics of the network. [...] iv) RFC38010, 9.14.2. Query Interval: The overall level of periodic MLD traffic is inversely proportional to the Query Interval. A longer Query Interval results in a lower overall level of MLD traffic. The value of the Query Interval MUST be equal to or greater than the Maximum Response Delay used to calculate the Maximum Response Code inserted in General Query messages. I assume that was why switchback is calculated as is (3 * max_delay), although this setting seems to be meant for routers only to configure their [QI] interval for non-default intervals. So usage here like this is clearly wrong. Concluding, the current behaviour in IPv6's multicast code is not conform to the RFC as switch back is calculated wrongly. That is, it has a too small value, so MLDv2 hosts switch back again to MLDv2 way too early, i.e. ~30secs instead of ~260secs on default. Hence, introduce necessary helper functions and fix this up properly as it should be. Introduced in 06da92283 ("[IPV6]: Add MLDv2 support."). Credits to Hannes Frederic Sowa who also had a hand in this as well. Also thanks to Hangbin Liu who did initial testing. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: David Stevens <dlstevens@us.ibm.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 06:19:37 +08:00
/* RFC3810, 9.2. Query Interval */
#define MLD_QI_DEFAULT (125 * HZ)
/* RFC3810, 9.3. Query Response Interval */
#define MLD_QRI_DEFAULT (10 * HZ)
/* RFC3810, 8.1 Query Version Distinctions */
#define MLD_V1_QUERY_LEN 24
#define MLD_V2_QUERY_LEN_MIN 28
#define IPV6_MLD_MAX_MSF 64
int sysctl_mld_max_msf __read_mostly = IPV6_MLD_MAX_MSF;
int sysctl_mld_qrv __read_mostly = MLD_QRV_DEFAULT;
/*
* socket join on multicast group
*/
#define for_each_pmc_rcu(np, pmc) \
for (pmc = rcu_dereference(np->ipv6_mc_list); \
pmc != NULL; \
pmc = rcu_dereference(pmc->next))
static int unsolicited_report_interval(struct inet6_dev *idev)
{
int iv;
if (mld_in_v1_mode(idev))
iv = idev->cnf.mldv1_unsolicited_report_interval;
else
iv = idev->cnf.mldv2_unsolicited_report_interval;
return iv > 0 ? iv : 1;
}
int ipv6_sock_mc_join(struct sock *sk, int ifindex, const struct in6_addr *addr)
{
struct net_device *dev = NULL;
struct ipv6_mc_socklist *mc_lst;
struct ipv6_pinfo *np = inet6_sk(sk);
struct net *net = sock_net(sk);
int err;
ASSERT_RTNL();
if (!ipv6_addr_is_multicast(addr))
return -EINVAL;
rcu_read_lock();
for_each_pmc_rcu(np, mc_lst) {
if ((ifindex == 0 || mc_lst->ifindex == ifindex) &&
ipv6_addr_equal(&mc_lst->addr, addr)) {
rcu_read_unlock();
return -EADDRINUSE;
}
}
rcu_read_unlock();
mc_lst = sock_kmalloc(sk, sizeof(struct ipv6_mc_socklist), GFP_KERNEL);
if (!mc_lst)
return -ENOMEM;
mc_lst->next = NULL;
mc_lst->addr = *addr;
if (ifindex == 0) {
struct rt6_info *rt;
rt = rt6_lookup(net, addr, NULL, 0, 0);
if (rt) {
dev = rt->dst.dev;
ip6_rt_put(rt);
}
} else
dev = __dev_get_by_index(net, ifindex);
if (!dev) {
sock_kfree_s(sk, mc_lst, sizeof(*mc_lst));
return -ENODEV;
}
mc_lst->ifindex = dev->ifindex;
mc_lst->sfmode = MCAST_EXCLUDE;
rwlock_init(&mc_lst->sflock);
mc_lst->sflist = NULL;
/*
* now add/increase the group membership on the device
*/
err = ipv6_dev_mc_inc(dev, addr);
if (err) {
sock_kfree_s(sk, mc_lst, sizeof(*mc_lst));
return err;
}
mc_lst->next = np->ipv6_mc_list;
rcu_assign_pointer(np->ipv6_mc_list, mc_lst);
return 0;
}
EXPORT_SYMBOL(ipv6_sock_mc_join);
/*
* socket leave on multicast group
*/
int ipv6_sock_mc_drop(struct sock *sk, int ifindex, const struct in6_addr *addr)
{
struct ipv6_pinfo *np = inet6_sk(sk);
struct ipv6_mc_socklist *mc_lst;
struct ipv6_mc_socklist __rcu **lnk;
struct net *net = sock_net(sk);
ASSERT_RTNL();
if (!ipv6_addr_is_multicast(addr))
return -EINVAL;
for (lnk = &np->ipv6_mc_list;
(mc_lst = rtnl_dereference(*lnk)) != NULL;
lnk = &mc_lst->next) {
if ((ifindex == 0 || mc_lst->ifindex == ifindex) &&
ipv6_addr_equal(&mc_lst->addr, addr)) {
struct net_device *dev;
*lnk = mc_lst->next;
dev = __dev_get_by_index(net, mc_lst->ifindex);
if (dev) {
struct inet6_dev *idev = __in6_dev_get(dev);
(void) ip6_mc_leave_src(sk, mc_lst, idev);
if (idev)
__ipv6_dev_mc_dec(idev, &mc_lst->addr);
} else
(void) ip6_mc_leave_src(sk, mc_lst, NULL);
atomic_sub(sizeof(*mc_lst), &sk->sk_omem_alloc);
kfree_rcu(mc_lst, rcu);
return 0;
}
}
return -EADDRNOTAVAIL;
}
EXPORT_SYMBOL(ipv6_sock_mc_drop);
/* called with rcu_read_lock() */
static struct inet6_dev *ip6_mc_find_dev_rcu(struct net *net,
const struct in6_addr *group,
int ifindex)
{
struct net_device *dev = NULL;
struct inet6_dev *idev = NULL;
if (ifindex == 0) {
struct rt6_info *rt = rt6_lookup(net, group, NULL, 0, 0);
if (rt) {
dev = rt->dst.dev;
ip6_rt_put(rt);
}
} else
dev = dev_get_by_index_rcu(net, ifindex);
if (!dev)
return NULL;
idev = __in6_dev_get(dev);
if (!idev)
return NULL;
read_lock_bh(&idev->lock);
if (idev->dead) {
read_unlock_bh(&idev->lock);
return NULL;
}
return idev;
}
void __ipv6_sock_mc_close(struct sock *sk)
{
struct ipv6_pinfo *np = inet6_sk(sk);
struct ipv6_mc_socklist *mc_lst;
struct net *net = sock_net(sk);
ASSERT_RTNL();
while ((mc_lst = rtnl_dereference(np->ipv6_mc_list)) != NULL) {
struct net_device *dev;
np->ipv6_mc_list = mc_lst->next;
dev = __dev_get_by_index(net, mc_lst->ifindex);
if (dev) {
struct inet6_dev *idev = __in6_dev_get(dev);
(void) ip6_mc_leave_src(sk, mc_lst, idev);
if (idev)
__ipv6_dev_mc_dec(idev, &mc_lst->addr);
} else
(void) ip6_mc_leave_src(sk, mc_lst, NULL);
atomic_sub(sizeof(*mc_lst), &sk->sk_omem_alloc);
kfree_rcu(mc_lst, rcu);
}
}
void ipv6_sock_mc_close(struct sock *sk)
{
struct ipv6_pinfo *np = inet6_sk(sk);
if (!rcu_access_pointer(np->ipv6_mc_list))
return;
rtnl_lock();
__ipv6_sock_mc_close(sk);
rtnl_unlock();
}
int ip6_mc_source(int add, int omode, struct sock *sk,
struct group_source_req *pgsr)
{
struct in6_addr *source, *group;
struct ipv6_mc_socklist *pmc;
struct inet6_dev *idev;
struct ipv6_pinfo *inet6 = inet6_sk(sk);
struct ip6_sf_socklist *psl;
struct net *net = sock_net(sk);
int i, j, rv;
int leavegroup = 0;
int pmclocked = 0;
int err;
source = &((struct sockaddr_in6 *)&pgsr->gsr_source)->sin6_addr;
group = &((struct sockaddr_in6 *)&pgsr->gsr_group)->sin6_addr;
if (!ipv6_addr_is_multicast(group))
return -EINVAL;
rcu_read_lock();
idev = ip6_mc_find_dev_rcu(net, group, pgsr->gsr_interface);
if (!idev) {
rcu_read_unlock();
return -ENODEV;
}
err = -EADDRNOTAVAIL;
for_each_pmc_rcu(inet6, pmc) {
if (pgsr->gsr_interface && pmc->ifindex != pgsr->gsr_interface)
continue;
if (ipv6_addr_equal(&pmc->addr, group))
break;
}
if (!pmc) { /* must have a prior join */
err = -EINVAL;
goto done;
}
/* if a source filter was set, must be the same mode as before */
if (pmc->sflist) {
if (pmc->sfmode != omode) {
err = -EINVAL;
goto done;
}
} else if (pmc->sfmode != omode) {
/* allow mode switches for empty-set filters */
ip6_mc_add_src(idev, group, omode, 0, NULL, 0);
ip6_mc_del_src(idev, group, pmc->sfmode, 0, NULL, 0);
pmc->sfmode = omode;
}
write_lock(&pmc->sflock);
pmclocked = 1;
psl = pmc->sflist;
if (!add) {
if (!psl)
goto done; /* err = -EADDRNOTAVAIL */
rv = !0;
for (i = 0; i < psl->sl_count; i++) {
rv = !ipv6_addr_equal(&psl->sl_addr[i], source);
if (rv == 0)
break;
}
if (rv) /* source not found */
goto done; /* err = -EADDRNOTAVAIL */
/* special case - (INCLUDE, empty) == LEAVE_GROUP */
if (psl->sl_count == 1 && omode == MCAST_INCLUDE) {
leavegroup = 1;
goto done;
}
/* update the interface filter */
ip6_mc_del_src(idev, group, omode, 1, source, 1);
for (j = i+1; j < psl->sl_count; j++)
psl->sl_addr[j-1] = psl->sl_addr[j];
psl->sl_count--;
err = 0;
goto done;
}
/* else, add a new source to the filter */
if (psl && psl->sl_count >= sysctl_mld_max_msf) {
err = -ENOBUFS;
goto done;
}
if (!psl || psl->sl_count == psl->sl_max) {
struct ip6_sf_socklist *newpsl;
int count = IP6_SFBLOCK;
if (psl)
count += psl->sl_max;
newpsl = sock_kmalloc(sk, IP6_SFLSIZE(count), GFP_ATOMIC);
if (!newpsl) {
err = -ENOBUFS;
goto done;
}
newpsl->sl_max = count;
newpsl->sl_count = count - IP6_SFBLOCK;
if (psl) {
for (i = 0; i < psl->sl_count; i++)
newpsl->sl_addr[i] = psl->sl_addr[i];
sock_kfree_s(sk, psl, IP6_SFLSIZE(psl->sl_max));
}
pmc->sflist = psl = newpsl;
}
rv = 1; /* > 0 for insert logic below if sl_count is 0 */
for (i = 0; i < psl->sl_count; i++) {
rv = !ipv6_addr_equal(&psl->sl_addr[i], source);
if (rv == 0) /* There is an error in the address. */
goto done;
}
for (j = psl->sl_count-1; j >= i; j--)
psl->sl_addr[j+1] = psl->sl_addr[j];
psl->sl_addr[i] = *source;
psl->sl_count++;
err = 0;
/* update the interface list */
ip6_mc_add_src(idev, group, omode, 1, source, 1);
done:
if (pmclocked)
write_unlock(&pmc->sflock);
read_unlock_bh(&idev->lock);
rcu_read_unlock();
if (leavegroup)
err = ipv6_sock_mc_drop(sk, pgsr->gsr_interface, group);
return err;
}
int ip6_mc_msfilter(struct sock *sk, struct group_filter *gsf)
{
const struct in6_addr *group;
struct ipv6_mc_socklist *pmc;
struct inet6_dev *idev;
struct ipv6_pinfo *inet6 = inet6_sk(sk);
struct ip6_sf_socklist *newpsl, *psl;
struct net *net = sock_net(sk);
int leavegroup = 0;
int i, err;
group = &((struct sockaddr_in6 *)&gsf->gf_group)->sin6_addr;
if (!ipv6_addr_is_multicast(group))
return -EINVAL;
if (gsf->gf_fmode != MCAST_INCLUDE &&
gsf->gf_fmode != MCAST_EXCLUDE)
return -EINVAL;
rcu_read_lock();
idev = ip6_mc_find_dev_rcu(net, group, gsf->gf_interface);
if (!idev) {
rcu_read_unlock();
return -ENODEV;
}
err = 0;
if (gsf->gf_fmode == MCAST_INCLUDE && gsf->gf_numsrc == 0) {
leavegroup = 1;
goto done;
}
for_each_pmc_rcu(inet6, pmc) {
if (pmc->ifindex != gsf->gf_interface)
continue;
if (ipv6_addr_equal(&pmc->addr, group))
break;
}
if (!pmc) { /* must have a prior join */
err = -EINVAL;
goto done;
}
if (gsf->gf_numsrc) {
newpsl = sock_kmalloc(sk, IP6_SFLSIZE(gsf->gf_numsrc),
GFP_ATOMIC);
if (!newpsl) {
err = -ENOBUFS;
goto done;
}
newpsl->sl_max = newpsl->sl_count = gsf->gf_numsrc;
for (i = 0; i < newpsl->sl_count; ++i) {
struct sockaddr_in6 *psin6;
psin6 = (struct sockaddr_in6 *)&gsf->gf_slist[i];
newpsl->sl_addr[i] = psin6->sin6_addr;
}
err = ip6_mc_add_src(idev, group, gsf->gf_fmode,
newpsl->sl_count, newpsl->sl_addr, 0);
if (err) {
sock_kfree_s(sk, newpsl, IP6_SFLSIZE(newpsl->sl_max));
goto done;
}
} else {
newpsl = NULL;
(void) ip6_mc_add_src(idev, group, gsf->gf_fmode, 0, NULL, 0);
}
write_lock(&pmc->sflock);
psl = pmc->sflist;
if (psl) {
(void) ip6_mc_del_src(idev, group, pmc->sfmode,
psl->sl_count, psl->sl_addr, 0);
sock_kfree_s(sk, psl, IP6_SFLSIZE(psl->sl_max));
} else
(void) ip6_mc_del_src(idev, group, pmc->sfmode, 0, NULL, 0);
pmc->sflist = newpsl;
pmc->sfmode = gsf->gf_fmode;
write_unlock(&pmc->sflock);
err = 0;
done:
read_unlock_bh(&idev->lock);
rcu_read_unlock();
if (leavegroup)
err = ipv6_sock_mc_drop(sk, gsf->gf_interface, group);
return err;
}
int ip6_mc_msfget(struct sock *sk, struct group_filter *gsf,
struct group_filter __user *optval, int __user *optlen)
{
int err, i, count, copycount;
const struct in6_addr *group;
struct ipv6_mc_socklist *pmc;
struct inet6_dev *idev;
struct ipv6_pinfo *inet6 = inet6_sk(sk);
struct ip6_sf_socklist *psl;
struct net *net = sock_net(sk);
group = &((struct sockaddr_in6 *)&gsf->gf_group)->sin6_addr;
if (!ipv6_addr_is_multicast(group))
return -EINVAL;
rcu_read_lock();
idev = ip6_mc_find_dev_rcu(net, group, gsf->gf_interface);
if (!idev) {
rcu_read_unlock();
return -ENODEV;
}
err = -EADDRNOTAVAIL;
/* changes to the ipv6_mc_list require the socket lock and
* rtnl lock. We have the socket lock and rcu read lock,
* so reading the list is safe.
*/
for_each_pmc_rcu(inet6, pmc) {
if (pmc->ifindex != gsf->gf_interface)
continue;
if (ipv6_addr_equal(group, &pmc->addr))
break;
}
if (!pmc) /* must have a prior join */
goto done;
gsf->gf_fmode = pmc->sfmode;
psl = pmc->sflist;
count = psl ? psl->sl_count : 0;
read_unlock_bh(&idev->lock);
rcu_read_unlock();
copycount = count < gsf->gf_numsrc ? count : gsf->gf_numsrc;
gsf->gf_numsrc = count;
if (put_user(GROUP_FILTER_SIZE(copycount), optlen) ||
copy_to_user(optval, gsf, GROUP_FILTER_SIZE(0))) {
return -EFAULT;
}
/* changes to psl require the socket lock, and a write lock
* on pmc->sflock. We have the socket lock so reading here is safe.
*/
for (i = 0; i < copycount; i++) {
struct sockaddr_in6 *psin6;
struct sockaddr_storage ss;
psin6 = (struct sockaddr_in6 *)&ss;
memset(&ss, 0, sizeof(ss));
psin6->sin6_family = AF_INET6;
psin6->sin6_addr = psl->sl_addr[i];
if (copy_to_user(&optval->gf_slist[i], &ss, sizeof(ss)))
return -EFAULT;
}
return 0;
done:
read_unlock_bh(&idev->lock);
rcu_read_unlock();
return err;
}
bool inet6_mc_check(struct sock *sk, const struct in6_addr *mc_addr,
const struct in6_addr *src_addr)
{
struct ipv6_pinfo *np = inet6_sk(sk);
struct ipv6_mc_socklist *mc;
struct ip6_sf_socklist *psl;
bool rv = true;
rcu_read_lock();
for_each_pmc_rcu(np, mc) {
if (ipv6_addr_equal(&mc->addr, mc_addr))
break;
}
if (!mc) {
rcu_read_unlock();
return true;
}
read_lock(&mc->sflock);
psl = mc->sflist;
if (!psl) {
rv = mc->sfmode == MCAST_EXCLUDE;
} else {
int i;
for (i = 0; i < psl->sl_count; i++) {
if (ipv6_addr_equal(&psl->sl_addr[i], src_addr))
break;
}
if (mc->sfmode == MCAST_INCLUDE && i >= psl->sl_count)
rv = false;
if (mc->sfmode == MCAST_EXCLUDE && i < psl->sl_count)
rv = false;
}
read_unlock(&mc->sflock);
rcu_read_unlock();
return rv;
}
static void igmp6_group_added(struct ifmcaddr6 *mc)
{
struct net_device *dev = mc->idev->dev;
char buf[MAX_ADDR_LEN];
if (IPV6_ADDR_MC_SCOPE(&mc->mca_addr) <
IPV6_ADDR_SCOPE_LINKLOCAL)
return;
spin_lock_bh(&mc->mca_lock);
if (!(mc->mca_flags&MAF_LOADED)) {
mc->mca_flags |= MAF_LOADED;
if (ndisc_mc_map(&mc->mca_addr, buf, dev, 0) == 0)
dev_mc_add(dev, buf);
}
spin_unlock_bh(&mc->mca_lock);
if (!(dev->flags & IFF_UP) || (mc->mca_flags & MAF_NOREPORT))
return;
if (mld_in_v1_mode(mc->idev)) {
igmp6_join_group(mc);
return;
}
/* else v2 */
mc->mca_crcount = mc->idev->mc_qrv;
mld_ifc_event(mc->idev);
}
static void igmp6_group_dropped(struct ifmcaddr6 *mc)
{
struct net_device *dev = mc->idev->dev;
char buf[MAX_ADDR_LEN];
if (IPV6_ADDR_MC_SCOPE(&mc->mca_addr) <
IPV6_ADDR_SCOPE_LINKLOCAL)
return;
spin_lock_bh(&mc->mca_lock);
if (mc->mca_flags&MAF_LOADED) {
mc->mca_flags &= ~MAF_LOADED;
if (ndisc_mc_map(&mc->mca_addr, buf, dev, 0) == 0)
dev_mc_del(dev, buf);
}
spin_unlock_bh(&mc->mca_lock);
if (mc->mca_flags & MAF_NOREPORT)
return;
if (!mc->idev->dead)
igmp6_leave_group(mc);
spin_lock_bh(&mc->mca_lock);
if (del_timer(&mc->mca_timer))
refcount_dec(&mc->mca_refcnt);
spin_unlock_bh(&mc->mca_lock);
}
/*
* deleted ifmcaddr6 manipulation
*/
static void mld_add_delrec(struct inet6_dev *idev, struct ifmcaddr6 *im)
{
struct ifmcaddr6 *pmc;
/* this is an "ifmcaddr6" for convenience; only the fields below
* are actually used. In particular, the refcnt and users are not
* used for management of the delete list. Using the same structure
* for deleted items allows change reports to use common code with
* non-deleted or query-response MCA's.
*/
pmc = kzalloc(sizeof(*pmc), GFP_ATOMIC);
if (!pmc)
return;
spin_lock_bh(&im->mca_lock);
spin_lock_init(&pmc->mca_lock);
pmc->idev = im->idev;
in6_dev_hold(idev);
pmc->mca_addr = im->mca_addr;
pmc->mca_crcount = idev->mc_qrv;
pmc->mca_sfmode = im->mca_sfmode;
if (pmc->mca_sfmode == MCAST_INCLUDE) {
struct ip6_sf_list *psf;
pmc->mca_tomb = im->mca_tomb;
pmc->mca_sources = im->mca_sources;
im->mca_tomb = im->mca_sources = NULL;
for (psf = pmc->mca_sources; psf; psf = psf->sf_next)
psf->sf_crcount = pmc->mca_crcount;
}
spin_unlock_bh(&im->mca_lock);
spin_lock_bh(&idev->mc_lock);
pmc->next = idev->mc_tomb;
idev->mc_tomb = pmc;
spin_unlock_bh(&idev->mc_lock);
}
static void mld_del_delrec(struct inet6_dev *idev, struct ifmcaddr6 *im)
{
struct ifmcaddr6 *pmc, *pmc_prev;
struct ip6_sf_list *psf;
struct in6_addr *pmca = &im->mca_addr;
spin_lock_bh(&idev->mc_lock);
pmc_prev = NULL;
for (pmc = idev->mc_tomb; pmc; pmc = pmc->next) {
if (ipv6_addr_equal(&pmc->mca_addr, pmca))
break;
pmc_prev = pmc;
}
if (pmc) {
if (pmc_prev)
pmc_prev->next = pmc->next;
else
idev->mc_tomb = pmc->next;
}
spin_unlock_bh(&idev->mc_lock);
spin_lock_bh(&im->mca_lock);
if (pmc) {
im->idev = pmc->idev;
im->mca_crcount = idev->mc_qrv;
im->mca_sfmode = pmc->mca_sfmode;
if (pmc->mca_sfmode == MCAST_INCLUDE) {
im->mca_tomb = pmc->mca_tomb;
im->mca_sources = pmc->mca_sources;
for (psf = im->mca_sources; psf; psf = psf->sf_next)
psf->sf_crcount = im->mca_crcount;
}
in6_dev_put(pmc->idev);
kfree(pmc);
}
spin_unlock_bh(&im->mca_lock);
}
static void mld_clear_delrec(struct inet6_dev *idev)
{
struct ifmcaddr6 *pmc, *nextpmc;
spin_lock_bh(&idev->mc_lock);
pmc = idev->mc_tomb;
idev->mc_tomb = NULL;
spin_unlock_bh(&idev->mc_lock);
for (; pmc; pmc = nextpmc) {
nextpmc = pmc->next;
ip6_mc_clear_src(pmc);
in6_dev_put(pmc->idev);
kfree(pmc);
}
/* clear dead sources, too */
read_lock_bh(&idev->lock);
for (pmc = idev->mc_list; pmc; pmc = pmc->next) {
struct ip6_sf_list *psf, *psf_next;
spin_lock_bh(&pmc->mca_lock);
psf = pmc->mca_tomb;
pmc->mca_tomb = NULL;
spin_unlock_bh(&pmc->mca_lock);
for (; psf; psf = psf_next) {
psf_next = psf->sf_next;
kfree(psf);
}
}
read_unlock_bh(&idev->lock);
}
static void mca_get(struct ifmcaddr6 *mc)
{
refcount_inc(&mc->mca_refcnt);
}
static void ma_put(struct ifmcaddr6 *mc)
{
if (refcount_dec_and_test(&mc->mca_refcnt)) {
in6_dev_put(mc->idev);
kfree(mc);
}
}
static struct ifmcaddr6 *mca_alloc(struct inet6_dev *idev,
const struct in6_addr *addr)
{
struct ifmcaddr6 *mc;
mc = kzalloc(sizeof(*mc), GFP_ATOMIC);
if (!mc)
return NULL;
setup_timer(&mc->mca_timer, igmp6_timer_handler, (unsigned long)mc);
mc->mca_addr = *addr;
mc->idev = idev; /* reference taken by caller */
mc->mca_users = 1;
/* mca_stamp should be updated upon changes */
mc->mca_cstamp = mc->mca_tstamp = jiffies;
refcount_set(&mc->mca_refcnt, 1);
spin_lock_init(&mc->mca_lock);
/* initial mode is (EX, empty) */
mc->mca_sfmode = MCAST_EXCLUDE;
mc->mca_sfcount[MCAST_EXCLUDE] = 1;
if (ipv6_addr_is_ll_all_nodes(&mc->mca_addr) ||
IPV6_ADDR_MC_SCOPE(&mc->mca_addr) < IPV6_ADDR_SCOPE_LINKLOCAL)
mc->mca_flags |= MAF_NOREPORT;
return mc;
}
/*
* device multicast group inc (add if not found)
*/
int ipv6_dev_mc_inc(struct net_device *dev, const struct in6_addr *addr)
{
struct ifmcaddr6 *mc;
struct inet6_dev *idev;
ASSERT_RTNL();
/* we need to take a reference on idev */
idev = in6_dev_get(dev);
if (!idev)
return -EINVAL;
write_lock_bh(&idev->lock);
if (idev->dead) {
write_unlock_bh(&idev->lock);
in6_dev_put(idev);
return -ENODEV;
}
for (mc = idev->mc_list; mc; mc = mc->next) {
if (ipv6_addr_equal(&mc->mca_addr, addr)) {
mc->mca_users++;
write_unlock_bh(&idev->lock);
ip6_mc_add_src(idev, &mc->mca_addr, MCAST_EXCLUDE, 0,
NULL, 0);
in6_dev_put(idev);
return 0;
}
}
mc = mca_alloc(idev, addr);
if (!mc) {
write_unlock_bh(&idev->lock);
in6_dev_put(idev);
return -ENOMEM;
}
mc->next = idev->mc_list;
idev->mc_list = mc;
/* Hold this for the code below before we unlock,
* it is already exposed via idev->mc_list.
*/
mca_get(mc);
write_unlock_bh(&idev->lock);
mld_del_delrec(idev, mc);
igmp6_group_added(mc);
ma_put(mc);
return 0;
}
/*
* device multicast group del
*/
int __ipv6_dev_mc_dec(struct inet6_dev *idev, const struct in6_addr *addr)
{
struct ifmcaddr6 *ma, **map;
ASSERT_RTNL();
write_lock_bh(&idev->lock);
for (map = &idev->mc_list; (ma = *map) != NULL; map = &ma->next) {
if (ipv6_addr_equal(&ma->mca_addr, addr)) {
if (--ma->mca_users == 0) {
*map = ma->next;
write_unlock_bh(&idev->lock);
igmp6_group_dropped(ma);
ip6_mc_clear_src(ma);
ma_put(ma);
return 0;
}
write_unlock_bh(&idev->lock);
return 0;
}
}
write_unlock_bh(&idev->lock);
return -ENOENT;
}
int ipv6_dev_mc_dec(struct net_device *dev, const struct in6_addr *addr)
{
struct inet6_dev *idev;
int err;
ASSERT_RTNL();
idev = __in6_dev_get(dev);
if (!idev)
err = -ENODEV;
else
err = __ipv6_dev_mc_dec(idev, addr);
return err;
}
/*
* check if the interface/address pair is valid
*/
bool ipv6_chk_mcast_addr(struct net_device *dev, const struct in6_addr *group,
const struct in6_addr *src_addr)
{
struct inet6_dev *idev;
struct ifmcaddr6 *mc;
bool rv = false;
rcu_read_lock();
idev = __in6_dev_get(dev);
if (idev) {
read_lock_bh(&idev->lock);
for (mc = idev->mc_list; mc; mc = mc->next) {
if (ipv6_addr_equal(&mc->mca_addr, group))
break;
}
if (mc) {
if (src_addr && !ipv6_addr_any(src_addr)) {
struct ip6_sf_list *psf;
spin_lock_bh(&mc->mca_lock);
for (psf = mc->mca_sources; psf; psf = psf->sf_next) {
if (ipv6_addr_equal(&psf->sf_addr, src_addr))
break;
}
if (psf)
rv = psf->sf_count[MCAST_INCLUDE] ||
psf->sf_count[MCAST_EXCLUDE] !=
mc->mca_sfcount[MCAST_EXCLUDE];
else
rv = mc->mca_sfcount[MCAST_EXCLUDE] != 0;
spin_unlock_bh(&mc->mca_lock);
} else
rv = true; /* don't filter unspecified source */
}
read_unlock_bh(&idev->lock);
}
rcu_read_unlock();
return rv;
}
static void mld_gq_start_timer(struct inet6_dev *idev)
{
unsigned long tv = prandom_u32() % idev->mc_maxdelay;
idev->mc_gq_running = 1;
if (!mod_timer(&idev->mc_gq_timer, jiffies+tv+2))
in6_dev_hold(idev);
}
static void mld_gq_stop_timer(struct inet6_dev *idev)
{
idev->mc_gq_running = 0;
if (del_timer(&idev->mc_gq_timer))
__in6_dev_put(idev);
}
static void mld_ifc_start_timer(struct inet6_dev *idev, unsigned long delay)
{
unsigned long tv = prandom_u32() % delay;
if (!mod_timer(&idev->mc_ifc_timer, jiffies+tv+2))
in6_dev_hold(idev);
}
static void mld_ifc_stop_timer(struct inet6_dev *idev)
{
idev->mc_ifc_count = 0;
if (del_timer(&idev->mc_ifc_timer))
__in6_dev_put(idev);
}
static void mld_dad_start_timer(struct inet6_dev *idev, unsigned long delay)
{
unsigned long tv = prandom_u32() % delay;
if (!mod_timer(&idev->mc_dad_timer, jiffies+tv+2))
in6_dev_hold(idev);
}
static void mld_dad_stop_timer(struct inet6_dev *idev)
{
if (del_timer(&idev->mc_dad_timer))
__in6_dev_put(idev);
}
/*
* IGMP handling (alias multicast ICMPv6 messages)
*/
static void igmp6_group_queried(struct ifmcaddr6 *ma, unsigned long resptime)
{
unsigned long delay = resptime;
/* Do not start timer for these addresses */
if (ipv6_addr_is_ll_all_nodes(&ma->mca_addr) ||
IPV6_ADDR_MC_SCOPE(&ma->mca_addr) < IPV6_ADDR_SCOPE_LINKLOCAL)
return;
if (del_timer(&ma->mca_timer)) {
refcount_dec(&ma->mca_refcnt);
delay = ma->mca_timer.expires - jiffies;
}
if (delay >= resptime)
delay = prandom_u32() % resptime;
ma->mca_timer.expires = jiffies + delay;
if (!mod_timer(&ma->mca_timer, jiffies + delay))
refcount_inc(&ma->mca_refcnt);
ma->mca_flags |= MAF_TIMER_RUNNING;
}
/* mark EXCLUDE-mode sources */
static bool mld_xmarksources(struct ifmcaddr6 *pmc, int nsrcs,
const struct in6_addr *srcs)
{
struct ip6_sf_list *psf;
int i, scount;
scount = 0;
for (psf = pmc->mca_sources; psf; psf = psf->sf_next) {
if (scount == nsrcs)
break;
for (i = 0; i < nsrcs; i++) {
/* skip inactive filters */
if (psf->sf_count[MCAST_INCLUDE] ||
pmc->mca_sfcount[MCAST_EXCLUDE] !=
psf->sf_count[MCAST_EXCLUDE])
break;
if (ipv6_addr_equal(&srcs[i], &psf->sf_addr)) {
scount++;
break;
}
}
}
pmc->mca_flags &= ~MAF_GSQUERY;
if (scount == nsrcs) /* all sources excluded */
return false;
return true;
}
static bool mld_marksources(struct ifmcaddr6 *pmc, int nsrcs,
const struct in6_addr *srcs)
{
struct ip6_sf_list *psf;
int i, scount;
if (pmc->mca_sfmode == MCAST_EXCLUDE)
return mld_xmarksources(pmc, nsrcs, srcs);
/* mark INCLUDE-mode sources */
scount = 0;
for (psf = pmc->mca_sources; psf; psf = psf->sf_next) {
if (scount == nsrcs)
break;
for (i = 0; i < nsrcs; i++) {
if (ipv6_addr_equal(&srcs[i], &psf->sf_addr)) {
psf->sf_gsresp = 1;
scount++;
break;
}
}
}
if (!scount) {
pmc->mca_flags &= ~MAF_GSQUERY;
return false;
}
pmc->mca_flags |= MAF_GSQUERY;
return true;
}
static int mld_force_mld_version(const struct inet6_dev *idev)
{
/* Normally, both are 0 here. If enforcement to a particular is
* being used, individual device enforcement will have a lower
* precedence over 'all' device (.../conf/all/force_mld_version).
*/
if (dev_net(idev->dev)->ipv6.devconf_all->force_mld_version != 0)
return dev_net(idev->dev)->ipv6.devconf_all->force_mld_version;
else
return idev->cnf.force_mld_version;
}
static bool mld_in_v2_mode_only(const struct inet6_dev *idev)
{
return mld_force_mld_version(idev) == 2;
}
static bool mld_in_v1_mode_only(const struct inet6_dev *idev)
{
return mld_force_mld_version(idev) == 1;
}
static bool mld_in_v1_mode(const struct inet6_dev *idev)
{
if (mld_in_v2_mode_only(idev))
return false;
if (mld_in_v1_mode_only(idev))
return true;
if (idev->mc_v1_seen && time_before(jiffies, idev->mc_v1_seen))
return true;
return false;
}
net: ipv6: mld: fix v1/v2 switchback timeout to rfc3810, 9.12. i) RFC3810, 9.2. Query Interval [QI] says: The Query Interval variable denotes the interval between General Queries sent by the Querier. Default value: 125 seconds. [...] ii) RFC3810, 9.3. Query Response Interval [QRI] says: The Maximum Response Delay used to calculate the Maximum Response Code inserted into the periodic General Queries. Default value: 10000 (10 seconds) [...] The number of seconds represented by the [Query Response Interval] must be less than the [Query Interval]. iii) RFC3810, 9.12. Older Version Querier Present Timeout [OVQPT] says: The Older Version Querier Present Timeout is the time-out for transitioning a host back to MLDv2 Host Compatibility Mode. When an MLDv1 query is received, MLDv2 hosts set their Older Version Querier Present Timer to [Older Version Querier Present Timeout]. This value MUST be ([Robustness Variable] times (the [Query Interval] in the last Query received)) plus ([Query Response Interval]). Hence, on *default* the timeout results in: [RV] = 2, [QI] = 125sec, [QRI] = 10sec [OVQPT] = [RV] * [QI] + [QRI] = 260sec Having that said, we currently calculate [OVQPT] (here given as 'switchback' variable) as ... switchback = (idev->mc_qrv + 1) * max_delay RFC3810, 9.12. says "the [Query Interval] in the last Query received". In section "9.14. Configuring timers", it is said: This section is meant to provide advice to network administrators on how to tune these settings to their network. Ambitious router implementations might tune these settings dynamically based upon changing characteristics of the network. [...] iv) RFC38010, 9.14.2. Query Interval: The overall level of periodic MLD traffic is inversely proportional to the Query Interval. A longer Query Interval results in a lower overall level of MLD traffic. The value of the Query Interval MUST be equal to or greater than the Maximum Response Delay used to calculate the Maximum Response Code inserted in General Query messages. I assume that was why switchback is calculated as is (3 * max_delay), although this setting seems to be meant for routers only to configure their [QI] interval for non-default intervals. So usage here like this is clearly wrong. Concluding, the current behaviour in IPv6's multicast code is not conform to the RFC as switch back is calculated wrongly. That is, it has a too small value, so MLDv2 hosts switch back again to MLDv2 way too early, i.e. ~30secs instead of ~260secs on default. Hence, introduce necessary helper functions and fix this up properly as it should be. Introduced in 06da92283 ("[IPV6]: Add MLDv2 support."). Credits to Hannes Frederic Sowa who also had a hand in this as well. Also thanks to Hangbin Liu who did initial testing. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: David Stevens <dlstevens@us.ibm.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 06:19:37 +08:00
static void mld_set_v1_mode(struct inet6_dev *idev)
{
/* RFC3810, relevant sections:
* - 9.1. Robustness Variable
* - 9.2. Query Interval
* - 9.3. Query Response Interval
* - 9.12. Older Version Querier Present Timeout
*/
unsigned long switchback;
switchback = (idev->mc_qrv * idev->mc_qi) + idev->mc_qri;
idev->mc_v1_seen = jiffies + switchback;
}
static void mld_update_qrv(struct inet6_dev *idev,
const struct mld2_query *mlh2)
{
/* RFC3810, relevant sections:
* - 5.1.8. QRV (Querier's Robustness Variable)
* - 9.1. Robustness Variable
*/
/* The value of the Robustness Variable MUST NOT be zero,
* and SHOULD NOT be one. Catch this here if we ever run
* into such a case in future.
*/
const int min_qrv = min(MLD_QRV_DEFAULT, sysctl_mld_qrv);
net: ipv6: mld: fix v1/v2 switchback timeout to rfc3810, 9.12. i) RFC3810, 9.2. Query Interval [QI] says: The Query Interval variable denotes the interval between General Queries sent by the Querier. Default value: 125 seconds. [...] ii) RFC3810, 9.3. Query Response Interval [QRI] says: The Maximum Response Delay used to calculate the Maximum Response Code inserted into the periodic General Queries. Default value: 10000 (10 seconds) [...] The number of seconds represented by the [Query Response Interval] must be less than the [Query Interval]. iii) RFC3810, 9.12. Older Version Querier Present Timeout [OVQPT] says: The Older Version Querier Present Timeout is the time-out for transitioning a host back to MLDv2 Host Compatibility Mode. When an MLDv1 query is received, MLDv2 hosts set their Older Version Querier Present Timer to [Older Version Querier Present Timeout]. This value MUST be ([Robustness Variable] times (the [Query Interval] in the last Query received)) plus ([Query Response Interval]). Hence, on *default* the timeout results in: [RV] = 2, [QI] = 125sec, [QRI] = 10sec [OVQPT] = [RV] * [QI] + [QRI] = 260sec Having that said, we currently calculate [OVQPT] (here given as 'switchback' variable) as ... switchback = (idev->mc_qrv + 1) * max_delay RFC3810, 9.12. says "the [Query Interval] in the last Query received". In section "9.14. Configuring timers", it is said: This section is meant to provide advice to network administrators on how to tune these settings to their network. Ambitious router implementations might tune these settings dynamically based upon changing characteristics of the network. [...] iv) RFC38010, 9.14.2. Query Interval: The overall level of periodic MLD traffic is inversely proportional to the Query Interval. A longer Query Interval results in a lower overall level of MLD traffic. The value of the Query Interval MUST be equal to or greater than the Maximum Response Delay used to calculate the Maximum Response Code inserted in General Query messages. I assume that was why switchback is calculated as is (3 * max_delay), although this setting seems to be meant for routers only to configure their [QI] interval for non-default intervals. So usage here like this is clearly wrong. Concluding, the current behaviour in IPv6's multicast code is not conform to the RFC as switch back is calculated wrongly. That is, it has a too small value, so MLDv2 hosts switch back again to MLDv2 way too early, i.e. ~30secs instead of ~260secs on default. Hence, introduce necessary helper functions and fix this up properly as it should be. Introduced in 06da92283 ("[IPV6]: Add MLDv2 support."). Credits to Hannes Frederic Sowa who also had a hand in this as well. Also thanks to Hangbin Liu who did initial testing. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: David Stevens <dlstevens@us.ibm.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 06:19:37 +08:00
WARN_ON(idev->mc_qrv == 0);
if (mlh2->mld2q_qrv > 0)
idev->mc_qrv = mlh2->mld2q_qrv;
if (unlikely(idev->mc_qrv < min_qrv)) {
net: ipv6: mld: fix v1/v2 switchback timeout to rfc3810, 9.12. i) RFC3810, 9.2. Query Interval [QI] says: The Query Interval variable denotes the interval between General Queries sent by the Querier. Default value: 125 seconds. [...] ii) RFC3810, 9.3. Query Response Interval [QRI] says: The Maximum Response Delay used to calculate the Maximum Response Code inserted into the periodic General Queries. Default value: 10000 (10 seconds) [...] The number of seconds represented by the [Query Response Interval] must be less than the [Query Interval]. iii) RFC3810, 9.12. Older Version Querier Present Timeout [OVQPT] says: The Older Version Querier Present Timeout is the time-out for transitioning a host back to MLDv2 Host Compatibility Mode. When an MLDv1 query is received, MLDv2 hosts set their Older Version Querier Present Timer to [Older Version Querier Present Timeout]. This value MUST be ([Robustness Variable] times (the [Query Interval] in the last Query received)) plus ([Query Response Interval]). Hence, on *default* the timeout results in: [RV] = 2, [QI] = 125sec, [QRI] = 10sec [OVQPT] = [RV] * [QI] + [QRI] = 260sec Having that said, we currently calculate [OVQPT] (here given as 'switchback' variable) as ... switchback = (idev->mc_qrv + 1) * max_delay RFC3810, 9.12. says "the [Query Interval] in the last Query received". In section "9.14. Configuring timers", it is said: This section is meant to provide advice to network administrators on how to tune these settings to their network. Ambitious router implementations might tune these settings dynamically based upon changing characteristics of the network. [...] iv) RFC38010, 9.14.2. Query Interval: The overall level of periodic MLD traffic is inversely proportional to the Query Interval. A longer Query Interval results in a lower overall level of MLD traffic. The value of the Query Interval MUST be equal to or greater than the Maximum Response Delay used to calculate the Maximum Response Code inserted in General Query messages. I assume that was why switchback is calculated as is (3 * max_delay), although this setting seems to be meant for routers only to configure their [QI] interval for non-default intervals. So usage here like this is clearly wrong. Concluding, the current behaviour in IPv6's multicast code is not conform to the RFC as switch back is calculated wrongly. That is, it has a too small value, so MLDv2 hosts switch back again to MLDv2 way too early, i.e. ~30secs instead of ~260secs on default. Hence, introduce necessary helper functions and fix this up properly as it should be. Introduced in 06da92283 ("[IPV6]: Add MLDv2 support."). Credits to Hannes Frederic Sowa who also had a hand in this as well. Also thanks to Hangbin Liu who did initial testing. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: David Stevens <dlstevens@us.ibm.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 06:19:37 +08:00
net_warn_ratelimited("IPv6: MLD: clamping QRV from %u to %u!\n",
idev->mc_qrv, min_qrv);
idev->mc_qrv = min_qrv;
net: ipv6: mld: fix v1/v2 switchback timeout to rfc3810, 9.12. i) RFC3810, 9.2. Query Interval [QI] says: The Query Interval variable denotes the interval between General Queries sent by the Querier. Default value: 125 seconds. [...] ii) RFC3810, 9.3. Query Response Interval [QRI] says: The Maximum Response Delay used to calculate the Maximum Response Code inserted into the periodic General Queries. Default value: 10000 (10 seconds) [...] The number of seconds represented by the [Query Response Interval] must be less than the [Query Interval]. iii) RFC3810, 9.12. Older Version Querier Present Timeout [OVQPT] says: The Older Version Querier Present Timeout is the time-out for transitioning a host back to MLDv2 Host Compatibility Mode. When an MLDv1 query is received, MLDv2 hosts set their Older Version Querier Present Timer to [Older Version Querier Present Timeout]. This value MUST be ([Robustness Variable] times (the [Query Interval] in the last Query received)) plus ([Query Response Interval]). Hence, on *default* the timeout results in: [RV] = 2, [QI] = 125sec, [QRI] = 10sec [OVQPT] = [RV] * [QI] + [QRI] = 260sec Having that said, we currently calculate [OVQPT] (here given as 'switchback' variable) as ... switchback = (idev->mc_qrv + 1) * max_delay RFC3810, 9.12. says "the [Query Interval] in the last Query received". In section "9.14. Configuring timers", it is said: This section is meant to provide advice to network administrators on how to tune these settings to their network. Ambitious router implementations might tune these settings dynamically based upon changing characteristics of the network. [...] iv) RFC38010, 9.14.2. Query Interval: The overall level of periodic MLD traffic is inversely proportional to the Query Interval. A longer Query Interval results in a lower overall level of MLD traffic. The value of the Query Interval MUST be equal to or greater than the Maximum Response Delay used to calculate the Maximum Response Code inserted in General Query messages. I assume that was why switchback is calculated as is (3 * max_delay), although this setting seems to be meant for routers only to configure their [QI] interval for non-default intervals. So usage here like this is clearly wrong. Concluding, the current behaviour in IPv6's multicast code is not conform to the RFC as switch back is calculated wrongly. That is, it has a too small value, so MLDv2 hosts switch back again to MLDv2 way too early, i.e. ~30secs instead of ~260secs on default. Hence, introduce necessary helper functions and fix this up properly as it should be. Introduced in 06da92283 ("[IPV6]: Add MLDv2 support."). Credits to Hannes Frederic Sowa who also had a hand in this as well. Also thanks to Hangbin Liu who did initial testing. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: David Stevens <dlstevens@us.ibm.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 06:19:37 +08:00
}
}
static void mld_update_qi(struct inet6_dev *idev,
const struct mld2_query *mlh2)
{
/* RFC3810, relevant sections:
* - 5.1.9. QQIC (Querier's Query Interval Code)
* - 9.2. Query Interval
* - 9.12. Older Version Querier Present Timeout
* (the [Query Interval] in the last Query received)
*/
unsigned long mc_qqi;
if (mlh2->mld2q_qqic < 128) {
mc_qqi = mlh2->mld2q_qqic;
} else {
unsigned long mc_man, mc_exp;
mc_exp = MLDV2_QQIC_EXP(mlh2->mld2q_qqic);
mc_man = MLDV2_QQIC_MAN(mlh2->mld2q_qqic);
mc_qqi = (mc_man | 0x10) << (mc_exp + 3);
}
idev->mc_qi = mc_qqi * HZ;
}
static void mld_update_qri(struct inet6_dev *idev,
const struct mld2_query *mlh2)
{
/* RFC3810, relevant sections:
* - 5.1.3. Maximum Response Code
* - 9.3. Query Response Interval
*/
idev->mc_qri = msecs_to_jiffies(mldv2_mrc(mlh2));
net: ipv6: mld: fix v1/v2 switchback timeout to rfc3810, 9.12. i) RFC3810, 9.2. Query Interval [QI] says: The Query Interval variable denotes the interval between General Queries sent by the Querier. Default value: 125 seconds. [...] ii) RFC3810, 9.3. Query Response Interval [QRI] says: The Maximum Response Delay used to calculate the Maximum Response Code inserted into the periodic General Queries. Default value: 10000 (10 seconds) [...] The number of seconds represented by the [Query Response Interval] must be less than the [Query Interval]. iii) RFC3810, 9.12. Older Version Querier Present Timeout [OVQPT] says: The Older Version Querier Present Timeout is the time-out for transitioning a host back to MLDv2 Host Compatibility Mode. When an MLDv1 query is received, MLDv2 hosts set their Older Version Querier Present Timer to [Older Version Querier Present Timeout]. This value MUST be ([Robustness Variable] times (the [Query Interval] in the last Query received)) plus ([Query Response Interval]). Hence, on *default* the timeout results in: [RV] = 2, [QI] = 125sec, [QRI] = 10sec [OVQPT] = [RV] * [QI] + [QRI] = 260sec Having that said, we currently calculate [OVQPT] (here given as 'switchback' variable) as ... switchback = (idev->mc_qrv + 1) * max_delay RFC3810, 9.12. says "the [Query Interval] in the last Query received". In section "9.14. Configuring timers", it is said: This section is meant to provide advice to network administrators on how to tune these settings to their network. Ambitious router implementations might tune these settings dynamically based upon changing characteristics of the network. [...] iv) RFC38010, 9.14.2. Query Interval: The overall level of periodic MLD traffic is inversely proportional to the Query Interval. A longer Query Interval results in a lower overall level of MLD traffic. The value of the Query Interval MUST be equal to or greater than the Maximum Response Delay used to calculate the Maximum Response Code inserted in General Query messages. I assume that was why switchback is calculated as is (3 * max_delay), although this setting seems to be meant for routers only to configure their [QI] interval for non-default intervals. So usage here like this is clearly wrong. Concluding, the current behaviour in IPv6's multicast code is not conform to the RFC as switch back is calculated wrongly. That is, it has a too small value, so MLDv2 hosts switch back again to MLDv2 way too early, i.e. ~30secs instead of ~260secs on default. Hence, introduce necessary helper functions and fix this up properly as it should be. Introduced in 06da92283 ("[IPV6]: Add MLDv2 support."). Credits to Hannes Frederic Sowa who also had a hand in this as well. Also thanks to Hangbin Liu who did initial testing. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: David Stevens <dlstevens@us.ibm.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 06:19:37 +08:00
}
static int mld_process_v1(struct inet6_dev *idev, struct mld_msg *mld,
ipv6: mld: answer mldv2 queries with mldv1 reports in mldv1 fallback RFC2710 (MLDv1), section 3.7. says: The length of a received MLD message is computed by taking the IPv6 Payload Length value and subtracting the length of any IPv6 extension headers present between the IPv6 header and the MLD message. If that length is greater than 24 octets, that indicates that there are other fields present *beyond* the fields described above, perhaps belonging to a *future backwards-compatible* version of MLD. An implementation of the version of MLD specified in this document *MUST NOT* send an MLD message longer than 24 octets and MUST ignore anything past the first 24 octets of a received MLD message. RFC3810 (MLDv2), section 8.2.1. states for *listeners* regarding presence of MLDv1 routers: In order to be compatible with MLDv1 routers, MLDv2 hosts MUST operate in version 1 compatibility mode. [...] When Host Compatibility Mode is MLDv2, a host acts using the MLDv2 protocol on that interface. When Host Compatibility Mode is MLDv1, a host acts in MLDv1 compatibility mode, using *only* the MLDv1 protocol, on that interface. [...] While section 8.3.1. specifies *router* behaviour regarding presence of MLDv1 routers: MLDv2 routers may be placed on a network where there is at least one MLDv1 router. The following requirements apply: If an MLDv1 router is present on the link, the Querier MUST use the *lowest* version of MLD present on the network. This must be administratively assured. Routers that desire to be compatible with MLDv1 MUST have a configuration option to act in MLDv1 mode; if an MLDv1 router is present on the link, the system administrator must explicitly configure all MLDv2 routers to act in MLDv1 mode. When in MLDv1 mode, the Querier MUST send periodic General Queries truncated at the Multicast Address field (i.e., 24 bytes long), and SHOULD also warn about receiving an MLDv2 Query (such warnings must be rate-limited). The Querier MUST also fill in the Maximum Response Delay in the Maximum Response Code field, i.e., the exponential algorithm described in section 5.1.3. is not used. [...] That means that we should not get queries from different versions of MLD. When there's a MLDv1 router present, MLDv2 enforces truncation and MRC == MRD (both fields are overlapping within the 24 octet range). Section 8.3.2. specifies behaviour in the presence of MLDv1 multicast address *listeners*: MLDv2 routers may be placed on a network where there are hosts that have not yet been upgraded to MLDv2. In order to be compatible with MLDv1 hosts, MLDv2 routers MUST operate in version 1 compatibility mode. MLDv2 routers keep a compatibility mode per multicast address record. The compatibility mode of a multicast address is determined from the Multicast Address Compatibility Mode variable, which can be in one of the two following states: MLDv1 or MLDv2. The Multicast Address Compatibility Mode of a multicast address record is set to MLDv1 whenever an MLDv1 Multicast Listener Report is *received* for that multicast address. At the same time, the Older Version Host Present timer for the multicast address is set to Older Version Host Present Timeout seconds. The timer is re-set whenever a new MLDv1 Report is received for that multicast address. If the Older Version Host Present timer expires, the router switches back to Multicast Address Compatibility Mode of MLDv2 for that multicast address. [...] That means, what can happen is the following scenario, that hosts can act in MLDv1 compatibility mode when they previously have received an MLDv1 query (or, simply operate in MLDv1 mode-only); and at the same time, an MLDv2 router could start up and transmits MLDv2 startup query messages while being unaware of the current operational mode. Given RFC2710, section 3.7 we would need to answer to that with an MLDv1 listener report, so that the router according to RFC3810, section 8.3.2. would receive that and internally switch to MLDv1 compatibility as well. Right now, I believe since the initial implementation of MLDv2, Linux hosts would just silently drop such MLDv2 queries instead of replying with an MLDv1 listener report, which would prevent a MLDv2 router going into fallback mode (until it receives other MLDv1 queries). Since the mapping of MRC to MRD in exactly such cases can make use of the exponential algorithm from 5.1.3, we cannot [strictly speaking] be aware in MLDv1 of the encoding in MRC, it seems also not mentioned by the RFC. Since encodings are the same up to 32767, assume in such a situation this value as a hard upper limit we would clamp. We have asked one of the RFC authors on that regard, and he mentioned that there seem not to be any implementations that make use of that exponential algorithm on startup messages. In any case, this patch fixes this MLD interoperability issue. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-20 20:03:55 +08:00
unsigned long *max_delay, bool v1_query)
{
unsigned long mldv1_md;
/* Ignore v1 queries */
if (mld_in_v2_mode_only(idev))
return -EINVAL;
mldv1_md = ntohs(mld->mld_maxdelay);
ipv6: mld: answer mldv2 queries with mldv1 reports in mldv1 fallback RFC2710 (MLDv1), section 3.7. says: The length of a received MLD message is computed by taking the IPv6 Payload Length value and subtracting the length of any IPv6 extension headers present between the IPv6 header and the MLD message. If that length is greater than 24 octets, that indicates that there are other fields present *beyond* the fields described above, perhaps belonging to a *future backwards-compatible* version of MLD. An implementation of the version of MLD specified in this document *MUST NOT* send an MLD message longer than 24 octets and MUST ignore anything past the first 24 octets of a received MLD message. RFC3810 (MLDv2), section 8.2.1. states for *listeners* regarding presence of MLDv1 routers: In order to be compatible with MLDv1 routers, MLDv2 hosts MUST operate in version 1 compatibility mode. [...] When Host Compatibility Mode is MLDv2, a host acts using the MLDv2 protocol on that interface. When Host Compatibility Mode is MLDv1, a host acts in MLDv1 compatibility mode, using *only* the MLDv1 protocol, on that interface. [...] While section 8.3.1. specifies *router* behaviour regarding presence of MLDv1 routers: MLDv2 routers may be placed on a network where there is at least one MLDv1 router. The following requirements apply: If an MLDv1 router is present on the link, the Querier MUST use the *lowest* version of MLD present on the network. This must be administratively assured. Routers that desire to be compatible with MLDv1 MUST have a configuration option to act in MLDv1 mode; if an MLDv1 router is present on the link, the system administrator must explicitly configure all MLDv2 routers to act in MLDv1 mode. When in MLDv1 mode, the Querier MUST send periodic General Queries truncated at the Multicast Address field (i.e., 24 bytes long), and SHOULD also warn about receiving an MLDv2 Query (such warnings must be rate-limited). The Querier MUST also fill in the Maximum Response Delay in the Maximum Response Code field, i.e., the exponential algorithm described in section 5.1.3. is not used. [...] That means that we should not get queries from different versions of MLD. When there's a MLDv1 router present, MLDv2 enforces truncation and MRC == MRD (both fields are overlapping within the 24 octet range). Section 8.3.2. specifies behaviour in the presence of MLDv1 multicast address *listeners*: MLDv2 routers may be placed on a network where there are hosts that have not yet been upgraded to MLDv2. In order to be compatible with MLDv1 hosts, MLDv2 routers MUST operate in version 1 compatibility mode. MLDv2 routers keep a compatibility mode per multicast address record. The compatibility mode of a multicast address is determined from the Multicast Address Compatibility Mode variable, which can be in one of the two following states: MLDv1 or MLDv2. The Multicast Address Compatibility Mode of a multicast address record is set to MLDv1 whenever an MLDv1 Multicast Listener Report is *received* for that multicast address. At the same time, the Older Version Host Present timer for the multicast address is set to Older Version Host Present Timeout seconds. The timer is re-set whenever a new MLDv1 Report is received for that multicast address. If the Older Version Host Present timer expires, the router switches back to Multicast Address Compatibility Mode of MLDv2 for that multicast address. [...] That means, what can happen is the following scenario, that hosts can act in MLDv1 compatibility mode when they previously have received an MLDv1 query (or, simply operate in MLDv1 mode-only); and at the same time, an MLDv2 router could start up and transmits MLDv2 startup query messages while being unaware of the current operational mode. Given RFC2710, section 3.7 we would need to answer to that with an MLDv1 listener report, so that the router according to RFC3810, section 8.3.2. would receive that and internally switch to MLDv1 compatibility as well. Right now, I believe since the initial implementation of MLDv2, Linux hosts would just silently drop such MLDv2 queries instead of replying with an MLDv1 listener report, which would prevent a MLDv2 router going into fallback mode (until it receives other MLDv1 queries). Since the mapping of MRC to MRD in exactly such cases can make use of the exponential algorithm from 5.1.3, we cannot [strictly speaking] be aware in MLDv1 of the encoding in MRC, it seems also not mentioned by the RFC. Since encodings are the same up to 32767, assume in such a situation this value as a hard upper limit we would clamp. We have asked one of the RFC authors on that regard, and he mentioned that there seem not to be any implementations that make use of that exponential algorithm on startup messages. In any case, this patch fixes this MLD interoperability issue. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-20 20:03:55 +08:00
/* When in MLDv1 fallback and a MLDv2 router start-up being
* unaware of current MLDv1 operation, the MRC == MRD mapping
* only works when the exponential algorithm is not being
* used (as MLDv1 is unaware of such things).
*
* According to the RFC author, the MLDv2 implementations
* he's aware of all use a MRC < 32768 on start up queries.
*
* Thus, should we *ever* encounter something else larger
* than that, just assume the maximum possible within our
* reach.
*/
if (!v1_query)
mldv1_md = min(mldv1_md, MLDV1_MRD_MAX_COMPAT);
*max_delay = max(msecs_to_jiffies(mldv1_md), 1UL);
ipv6: mld: answer mldv2 queries with mldv1 reports in mldv1 fallback RFC2710 (MLDv1), section 3.7. says: The length of a received MLD message is computed by taking the IPv6 Payload Length value and subtracting the length of any IPv6 extension headers present between the IPv6 header and the MLD message. If that length is greater than 24 octets, that indicates that there are other fields present *beyond* the fields described above, perhaps belonging to a *future backwards-compatible* version of MLD. An implementation of the version of MLD specified in this document *MUST NOT* send an MLD message longer than 24 octets and MUST ignore anything past the first 24 octets of a received MLD message. RFC3810 (MLDv2), section 8.2.1. states for *listeners* regarding presence of MLDv1 routers: In order to be compatible with MLDv1 routers, MLDv2 hosts MUST operate in version 1 compatibility mode. [...] When Host Compatibility Mode is MLDv2, a host acts using the MLDv2 protocol on that interface. When Host Compatibility Mode is MLDv1, a host acts in MLDv1 compatibility mode, using *only* the MLDv1 protocol, on that interface. [...] While section 8.3.1. specifies *router* behaviour regarding presence of MLDv1 routers: MLDv2 routers may be placed on a network where there is at least one MLDv1 router. The following requirements apply: If an MLDv1 router is present on the link, the Querier MUST use the *lowest* version of MLD present on the network. This must be administratively assured. Routers that desire to be compatible with MLDv1 MUST have a configuration option to act in MLDv1 mode; if an MLDv1 router is present on the link, the system administrator must explicitly configure all MLDv2 routers to act in MLDv1 mode. When in MLDv1 mode, the Querier MUST send periodic General Queries truncated at the Multicast Address field (i.e., 24 bytes long), and SHOULD also warn about receiving an MLDv2 Query (such warnings must be rate-limited). The Querier MUST also fill in the Maximum Response Delay in the Maximum Response Code field, i.e., the exponential algorithm described in section 5.1.3. is not used. [...] That means that we should not get queries from different versions of MLD. When there's a MLDv1 router present, MLDv2 enforces truncation and MRC == MRD (both fields are overlapping within the 24 octet range). Section 8.3.2. specifies behaviour in the presence of MLDv1 multicast address *listeners*: MLDv2 routers may be placed on a network where there are hosts that have not yet been upgraded to MLDv2. In order to be compatible with MLDv1 hosts, MLDv2 routers MUST operate in version 1 compatibility mode. MLDv2 routers keep a compatibility mode per multicast address record. The compatibility mode of a multicast address is determined from the Multicast Address Compatibility Mode variable, which can be in one of the two following states: MLDv1 or MLDv2. The Multicast Address Compatibility Mode of a multicast address record is set to MLDv1 whenever an MLDv1 Multicast Listener Report is *received* for that multicast address. At the same time, the Older Version Host Present timer for the multicast address is set to Older Version Host Present Timeout seconds. The timer is re-set whenever a new MLDv1 Report is received for that multicast address. If the Older Version Host Present timer expires, the router switches back to Multicast Address Compatibility Mode of MLDv2 for that multicast address. [...] That means, what can happen is the following scenario, that hosts can act in MLDv1 compatibility mode when they previously have received an MLDv1 query (or, simply operate in MLDv1 mode-only); and at the same time, an MLDv2 router could start up and transmits MLDv2 startup query messages while being unaware of the current operational mode. Given RFC2710, section 3.7 we would need to answer to that with an MLDv1 listener report, so that the router according to RFC3810, section 8.3.2. would receive that and internally switch to MLDv1 compatibility as well. Right now, I believe since the initial implementation of MLDv2, Linux hosts would just silently drop such MLDv2 queries instead of replying with an MLDv1 listener report, which would prevent a MLDv2 router going into fallback mode (until it receives other MLDv1 queries). Since the mapping of MRC to MRD in exactly such cases can make use of the exponential algorithm from 5.1.3, we cannot [strictly speaking] be aware in MLDv1 of the encoding in MRC, it seems also not mentioned by the RFC. Since encodings are the same up to 32767, assume in such a situation this value as a hard upper limit we would clamp. We have asked one of the RFC authors on that regard, and he mentioned that there seem not to be any implementations that make use of that exponential algorithm on startup messages. In any case, this patch fixes this MLD interoperability issue. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-20 20:03:55 +08:00
/* MLDv1 router present: we need to go into v1 mode *only*
* when an MLDv1 query is received as per section 9.12. of
* RFC3810! And we know from RFC2710 section 3.7 that MLDv1
* queries MUST be of exactly 24 octets.
*/
if (v1_query)
mld_set_v1_mode(idev);
/* cancel MLDv2 report timer */
mld_gq_stop_timer(idev);
/* cancel the interface change timer */
mld_ifc_stop_timer(idev);
/* clear deleted report items */
mld_clear_delrec(idev);
return 0;
}
static int mld_process_v2(struct inet6_dev *idev, struct mld2_query *mld,
unsigned long *max_delay)
{
*max_delay = max(msecs_to_jiffies(mldv2_mrc(mld)), 1UL);
mld_update_qrv(idev, mld);
mld_update_qi(idev, mld);
mld_update_qri(idev, mld);
idev->mc_maxdelay = *max_delay;
return 0;
}
/* called with rcu_read_lock() */
int igmp6_event_query(struct sk_buff *skb)
{
struct mld2_query *mlh2 = NULL;
struct ifmcaddr6 *ma;
const struct in6_addr *group;
unsigned long max_delay;
struct inet6_dev *idev;
struct mld_msg *mld;
int group_type;
int mark = 0;
int len, err;
if (!pskb_may_pull(skb, sizeof(struct in6_addr)))
return -EINVAL;
/* compute payload length excluding extension headers */
len = ntohs(ipv6_hdr(skb)->payload_len) + sizeof(struct ipv6hdr);
len -= skb_network_header_len(skb);
/* RFC3810 6.2
* Upon reception of an MLD message that contains a Query, the node
* checks if the source address of the message is a valid link-local
* address, if the Hop Limit is set to 1, and if the Router Alert
* option is present in the Hop-By-Hop Options header of the IPv6
* packet. If any of these checks fails, the packet is dropped.
*/
if (!(ipv6_addr_type(&ipv6_hdr(skb)->saddr) & IPV6_ADDR_LINKLOCAL) ||
ipv6_hdr(skb)->hop_limit != 1 ||
!(IP6CB(skb)->flags & IP6SKB_ROUTERALERT) ||
IP6CB(skb)->ra != htons(IPV6_OPT_ROUTERALERT_MLD))
return -EINVAL;
idev = __in6_dev_get(skb->dev);
if (!idev)
return 0;
mld = (struct mld_msg *)icmp6_hdr(skb);
group = &mld->mld_mca;
group_type = ipv6_addr_type(group);
if (group_type != IPV6_ADDR_ANY &&
!(group_type&IPV6_ADDR_MULTICAST))
return -EINVAL;
ipv6: mld: answer mldv2 queries with mldv1 reports in mldv1 fallback RFC2710 (MLDv1), section 3.7. says: The length of a received MLD message is computed by taking the IPv6 Payload Length value and subtracting the length of any IPv6 extension headers present between the IPv6 header and the MLD message. If that length is greater than 24 octets, that indicates that there are other fields present *beyond* the fields described above, perhaps belonging to a *future backwards-compatible* version of MLD. An implementation of the version of MLD specified in this document *MUST NOT* send an MLD message longer than 24 octets and MUST ignore anything past the first 24 octets of a received MLD message. RFC3810 (MLDv2), section 8.2.1. states for *listeners* regarding presence of MLDv1 routers: In order to be compatible with MLDv1 routers, MLDv2 hosts MUST operate in version 1 compatibility mode. [...] When Host Compatibility Mode is MLDv2, a host acts using the MLDv2 protocol on that interface. When Host Compatibility Mode is MLDv1, a host acts in MLDv1 compatibility mode, using *only* the MLDv1 protocol, on that interface. [...] While section 8.3.1. specifies *router* behaviour regarding presence of MLDv1 routers: MLDv2 routers may be placed on a network where there is at least one MLDv1 router. The following requirements apply: If an MLDv1 router is present on the link, the Querier MUST use the *lowest* version of MLD present on the network. This must be administratively assured. Routers that desire to be compatible with MLDv1 MUST have a configuration option to act in MLDv1 mode; if an MLDv1 router is present on the link, the system administrator must explicitly configure all MLDv2 routers to act in MLDv1 mode. When in MLDv1 mode, the Querier MUST send periodic General Queries truncated at the Multicast Address field (i.e., 24 bytes long), and SHOULD also warn about receiving an MLDv2 Query (such warnings must be rate-limited). The Querier MUST also fill in the Maximum Response Delay in the Maximum Response Code field, i.e., the exponential algorithm described in section 5.1.3. is not used. [...] That means that we should not get queries from different versions of MLD. When there's a MLDv1 router present, MLDv2 enforces truncation and MRC == MRD (both fields are overlapping within the 24 octet range). Section 8.3.2. specifies behaviour in the presence of MLDv1 multicast address *listeners*: MLDv2 routers may be placed on a network where there are hosts that have not yet been upgraded to MLDv2. In order to be compatible with MLDv1 hosts, MLDv2 routers MUST operate in version 1 compatibility mode. MLDv2 routers keep a compatibility mode per multicast address record. The compatibility mode of a multicast address is determined from the Multicast Address Compatibility Mode variable, which can be in one of the two following states: MLDv1 or MLDv2. The Multicast Address Compatibility Mode of a multicast address record is set to MLDv1 whenever an MLDv1 Multicast Listener Report is *received* for that multicast address. At the same time, the Older Version Host Present timer for the multicast address is set to Older Version Host Present Timeout seconds. The timer is re-set whenever a new MLDv1 Report is received for that multicast address. If the Older Version Host Present timer expires, the router switches back to Multicast Address Compatibility Mode of MLDv2 for that multicast address. [...] That means, what can happen is the following scenario, that hosts can act in MLDv1 compatibility mode when they previously have received an MLDv1 query (or, simply operate in MLDv1 mode-only); and at the same time, an MLDv2 router could start up and transmits MLDv2 startup query messages while being unaware of the current operational mode. Given RFC2710, section 3.7 we would need to answer to that with an MLDv1 listener report, so that the router according to RFC3810, section 8.3.2. would receive that and internally switch to MLDv1 compatibility as well. Right now, I believe since the initial implementation of MLDv2, Linux hosts would just silently drop such MLDv2 queries instead of replying with an MLDv1 listener report, which would prevent a MLDv2 router going into fallback mode (until it receives other MLDv1 queries). Since the mapping of MRC to MRD in exactly such cases can make use of the exponential algorithm from 5.1.3, we cannot [strictly speaking] be aware in MLDv1 of the encoding in MRC, it seems also not mentioned by the RFC. Since encodings are the same up to 32767, assume in such a situation this value as a hard upper limit we would clamp. We have asked one of the RFC authors on that regard, and he mentioned that there seem not to be any implementations that make use of that exponential algorithm on startup messages. In any case, this patch fixes this MLD interoperability issue. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-20 20:03:55 +08:00
if (len < MLD_V1_QUERY_LEN) {
return -EINVAL;
} else if (len == MLD_V1_QUERY_LEN || mld_in_v1_mode(idev)) {
err = mld_process_v1(idev, mld, &max_delay,
len == MLD_V1_QUERY_LEN);
if (err < 0)
return err;
} else if (len >= MLD_V2_QUERY_LEN_MIN) {
int srcs_offset = sizeof(struct mld2_query) -
sizeof(struct icmp6hdr);
net: ipv6: mld: fix v1/v2 switchback timeout to rfc3810, 9.12. i) RFC3810, 9.2. Query Interval [QI] says: The Query Interval variable denotes the interval between General Queries sent by the Querier. Default value: 125 seconds. [...] ii) RFC3810, 9.3. Query Response Interval [QRI] says: The Maximum Response Delay used to calculate the Maximum Response Code inserted into the periodic General Queries. Default value: 10000 (10 seconds) [...] The number of seconds represented by the [Query Response Interval] must be less than the [Query Interval]. iii) RFC3810, 9.12. Older Version Querier Present Timeout [OVQPT] says: The Older Version Querier Present Timeout is the time-out for transitioning a host back to MLDv2 Host Compatibility Mode. When an MLDv1 query is received, MLDv2 hosts set their Older Version Querier Present Timer to [Older Version Querier Present Timeout]. This value MUST be ([Robustness Variable] times (the [Query Interval] in the last Query received)) plus ([Query Response Interval]). Hence, on *default* the timeout results in: [RV] = 2, [QI] = 125sec, [QRI] = 10sec [OVQPT] = [RV] * [QI] + [QRI] = 260sec Having that said, we currently calculate [OVQPT] (here given as 'switchback' variable) as ... switchback = (idev->mc_qrv + 1) * max_delay RFC3810, 9.12. says "the [Query Interval] in the last Query received". In section "9.14. Configuring timers", it is said: This section is meant to provide advice to network administrators on how to tune these settings to their network. Ambitious router implementations might tune these settings dynamically based upon changing characteristics of the network. [...] iv) RFC38010, 9.14.2. Query Interval: The overall level of periodic MLD traffic is inversely proportional to the Query Interval. A longer Query Interval results in a lower overall level of MLD traffic. The value of the Query Interval MUST be equal to or greater than the Maximum Response Delay used to calculate the Maximum Response Code inserted in General Query messages. I assume that was why switchback is calculated as is (3 * max_delay), although this setting seems to be meant for routers only to configure their [QI] interval for non-default intervals. So usage here like this is clearly wrong. Concluding, the current behaviour in IPv6's multicast code is not conform to the RFC as switch back is calculated wrongly. That is, it has a too small value, so MLDv2 hosts switch back again to MLDv2 way too early, i.e. ~30secs instead of ~260secs on default. Hence, introduce necessary helper functions and fix this up properly as it should be. Introduced in 06da92283 ("[IPV6]: Add MLDv2 support."). Credits to Hannes Frederic Sowa who also had a hand in this as well. Also thanks to Hangbin Liu who did initial testing. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: David Stevens <dlstevens@us.ibm.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 06:19:37 +08:00
if (!pskb_may_pull(skb, srcs_offset))
return -EINVAL;
mlh2 = (struct mld2_query *)skb_transport_header(skb);
err = mld_process_v2(idev, mlh2, &max_delay);
if (err < 0)
return err;
net: ipv6: mld: fix v1/v2 switchback timeout to rfc3810, 9.12. i) RFC3810, 9.2. Query Interval [QI] says: The Query Interval variable denotes the interval between General Queries sent by the Querier. Default value: 125 seconds. [...] ii) RFC3810, 9.3. Query Response Interval [QRI] says: The Maximum Response Delay used to calculate the Maximum Response Code inserted into the periodic General Queries. Default value: 10000 (10 seconds) [...] The number of seconds represented by the [Query Response Interval] must be less than the [Query Interval]. iii) RFC3810, 9.12. Older Version Querier Present Timeout [OVQPT] says: The Older Version Querier Present Timeout is the time-out for transitioning a host back to MLDv2 Host Compatibility Mode. When an MLDv1 query is received, MLDv2 hosts set their Older Version Querier Present Timer to [Older Version Querier Present Timeout]. This value MUST be ([Robustness Variable] times (the [Query Interval] in the last Query received)) plus ([Query Response Interval]). Hence, on *default* the timeout results in: [RV] = 2, [QI] = 125sec, [QRI] = 10sec [OVQPT] = [RV] * [QI] + [QRI] = 260sec Having that said, we currently calculate [OVQPT] (here given as 'switchback' variable) as ... switchback = (idev->mc_qrv + 1) * max_delay RFC3810, 9.12. says "the [Query Interval] in the last Query received". In section "9.14. Configuring timers", it is said: This section is meant to provide advice to network administrators on how to tune these settings to their network. Ambitious router implementations might tune these settings dynamically based upon changing characteristics of the network. [...] iv) RFC38010, 9.14.2. Query Interval: The overall level of periodic MLD traffic is inversely proportional to the Query Interval. A longer Query Interval results in a lower overall level of MLD traffic. The value of the Query Interval MUST be equal to or greater than the Maximum Response Delay used to calculate the Maximum Response Code inserted in General Query messages. I assume that was why switchback is calculated as is (3 * max_delay), although this setting seems to be meant for routers only to configure their [QI] interval for non-default intervals. So usage here like this is clearly wrong. Concluding, the current behaviour in IPv6's multicast code is not conform to the RFC as switch back is calculated wrongly. That is, it has a too small value, so MLDv2 hosts switch back again to MLDv2 way too early, i.e. ~30secs instead of ~260secs on default. Hence, introduce necessary helper functions and fix this up properly as it should be. Introduced in 06da92283 ("[IPV6]: Add MLDv2 support."). Credits to Hannes Frederic Sowa who also had a hand in this as well. Also thanks to Hangbin Liu who did initial testing. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: David Stevens <dlstevens@us.ibm.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 06:19:37 +08:00
if (group_type == IPV6_ADDR_ANY) { /* general query */
if (mlh2->mld2q_nsrcs)
return -EINVAL; /* no sources allowed */
mld_gq_start_timer(idev);
return 0;
}
/* mark sources to include, if group & source-specific */
if (mlh2->mld2q_nsrcs != 0) {
if (!pskb_may_pull(skb, srcs_offset +
ntohs(mlh2->mld2q_nsrcs) * sizeof(struct in6_addr)))
return -EINVAL;
mlh2 = (struct mld2_query *)skb_transport_header(skb);
mark = 1;
}
ipv6: mld: answer mldv2 queries with mldv1 reports in mldv1 fallback RFC2710 (MLDv1), section 3.7. says: The length of a received MLD message is computed by taking the IPv6 Payload Length value and subtracting the length of any IPv6 extension headers present between the IPv6 header and the MLD message. If that length is greater than 24 octets, that indicates that there are other fields present *beyond* the fields described above, perhaps belonging to a *future backwards-compatible* version of MLD. An implementation of the version of MLD specified in this document *MUST NOT* send an MLD message longer than 24 octets and MUST ignore anything past the first 24 octets of a received MLD message. RFC3810 (MLDv2), section 8.2.1. states for *listeners* regarding presence of MLDv1 routers: In order to be compatible with MLDv1 routers, MLDv2 hosts MUST operate in version 1 compatibility mode. [...] When Host Compatibility Mode is MLDv2, a host acts using the MLDv2 protocol on that interface. When Host Compatibility Mode is MLDv1, a host acts in MLDv1 compatibility mode, using *only* the MLDv1 protocol, on that interface. [...] While section 8.3.1. specifies *router* behaviour regarding presence of MLDv1 routers: MLDv2 routers may be placed on a network where there is at least one MLDv1 router. The following requirements apply: If an MLDv1 router is present on the link, the Querier MUST use the *lowest* version of MLD present on the network. This must be administratively assured. Routers that desire to be compatible with MLDv1 MUST have a configuration option to act in MLDv1 mode; if an MLDv1 router is present on the link, the system administrator must explicitly configure all MLDv2 routers to act in MLDv1 mode. When in MLDv1 mode, the Querier MUST send periodic General Queries truncated at the Multicast Address field (i.e., 24 bytes long), and SHOULD also warn about receiving an MLDv2 Query (such warnings must be rate-limited). The Querier MUST also fill in the Maximum Response Delay in the Maximum Response Code field, i.e., the exponential algorithm described in section 5.1.3. is not used. [...] That means that we should not get queries from different versions of MLD. When there's a MLDv1 router present, MLDv2 enforces truncation and MRC == MRD (both fields are overlapping within the 24 octet range). Section 8.3.2. specifies behaviour in the presence of MLDv1 multicast address *listeners*: MLDv2 routers may be placed on a network where there are hosts that have not yet been upgraded to MLDv2. In order to be compatible with MLDv1 hosts, MLDv2 routers MUST operate in version 1 compatibility mode. MLDv2 routers keep a compatibility mode per multicast address record. The compatibility mode of a multicast address is determined from the Multicast Address Compatibility Mode variable, which can be in one of the two following states: MLDv1 or MLDv2. The Multicast Address Compatibility Mode of a multicast address record is set to MLDv1 whenever an MLDv1 Multicast Listener Report is *received* for that multicast address. At the same time, the Older Version Host Present timer for the multicast address is set to Older Version Host Present Timeout seconds. The timer is re-set whenever a new MLDv1 Report is received for that multicast address. If the Older Version Host Present timer expires, the router switches back to Multicast Address Compatibility Mode of MLDv2 for that multicast address. [...] That means, what can happen is the following scenario, that hosts can act in MLDv1 compatibility mode when they previously have received an MLDv1 query (or, simply operate in MLDv1 mode-only); and at the same time, an MLDv2 router could start up and transmits MLDv2 startup query messages while being unaware of the current operational mode. Given RFC2710, section 3.7 we would need to answer to that with an MLDv1 listener report, so that the router according to RFC3810, section 8.3.2. would receive that and internally switch to MLDv1 compatibility as well. Right now, I believe since the initial implementation of MLDv2, Linux hosts would just silently drop such MLDv2 queries instead of replying with an MLDv1 listener report, which would prevent a MLDv2 router going into fallback mode (until it receives other MLDv1 queries). Since the mapping of MRC to MRD in exactly such cases can make use of the exponential algorithm from 5.1.3, we cannot [strictly speaking] be aware in MLDv1 of the encoding in MRC, it seems also not mentioned by the RFC. Since encodings are the same up to 32767, assume in such a situation this value as a hard upper limit we would clamp. We have asked one of the RFC authors on that regard, and he mentioned that there seem not to be any implementations that make use of that exponential algorithm on startup messages. In any case, this patch fixes this MLD interoperability issue. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-20 20:03:55 +08:00
} else {
return -EINVAL;
ipv6: mld: answer mldv2 queries with mldv1 reports in mldv1 fallback RFC2710 (MLDv1), section 3.7. says: The length of a received MLD message is computed by taking the IPv6 Payload Length value and subtracting the length of any IPv6 extension headers present between the IPv6 header and the MLD message. If that length is greater than 24 octets, that indicates that there are other fields present *beyond* the fields described above, perhaps belonging to a *future backwards-compatible* version of MLD. An implementation of the version of MLD specified in this document *MUST NOT* send an MLD message longer than 24 octets and MUST ignore anything past the first 24 octets of a received MLD message. RFC3810 (MLDv2), section 8.2.1. states for *listeners* regarding presence of MLDv1 routers: In order to be compatible with MLDv1 routers, MLDv2 hosts MUST operate in version 1 compatibility mode. [...] When Host Compatibility Mode is MLDv2, a host acts using the MLDv2 protocol on that interface. When Host Compatibility Mode is MLDv1, a host acts in MLDv1 compatibility mode, using *only* the MLDv1 protocol, on that interface. [...] While section 8.3.1. specifies *router* behaviour regarding presence of MLDv1 routers: MLDv2 routers may be placed on a network where there is at least one MLDv1 router. The following requirements apply: If an MLDv1 router is present on the link, the Querier MUST use the *lowest* version of MLD present on the network. This must be administratively assured. Routers that desire to be compatible with MLDv1 MUST have a configuration option to act in MLDv1 mode; if an MLDv1 router is present on the link, the system administrator must explicitly configure all MLDv2 routers to act in MLDv1 mode. When in MLDv1 mode, the Querier MUST send periodic General Queries truncated at the Multicast Address field (i.e., 24 bytes long), and SHOULD also warn about receiving an MLDv2 Query (such warnings must be rate-limited). The Querier MUST also fill in the Maximum Response Delay in the Maximum Response Code field, i.e., the exponential algorithm described in section 5.1.3. is not used. [...] That means that we should not get queries from different versions of MLD. When there's a MLDv1 router present, MLDv2 enforces truncation and MRC == MRD (both fields are overlapping within the 24 octet range). Section 8.3.2. specifies behaviour in the presence of MLDv1 multicast address *listeners*: MLDv2 routers may be placed on a network where there are hosts that have not yet been upgraded to MLDv2. In order to be compatible with MLDv1 hosts, MLDv2 routers MUST operate in version 1 compatibility mode. MLDv2 routers keep a compatibility mode per multicast address record. The compatibility mode of a multicast address is determined from the Multicast Address Compatibility Mode variable, which can be in one of the two following states: MLDv1 or MLDv2. The Multicast Address Compatibility Mode of a multicast address record is set to MLDv1 whenever an MLDv1 Multicast Listener Report is *received* for that multicast address. At the same time, the Older Version Host Present timer for the multicast address is set to Older Version Host Present Timeout seconds. The timer is re-set whenever a new MLDv1 Report is received for that multicast address. If the Older Version Host Present timer expires, the router switches back to Multicast Address Compatibility Mode of MLDv2 for that multicast address. [...] That means, what can happen is the following scenario, that hosts can act in MLDv1 compatibility mode when they previously have received an MLDv1 query (or, simply operate in MLDv1 mode-only); and at the same time, an MLDv2 router could start up and transmits MLDv2 startup query messages while being unaware of the current operational mode. Given RFC2710, section 3.7 we would need to answer to that with an MLDv1 listener report, so that the router according to RFC3810, section 8.3.2. would receive that and internally switch to MLDv1 compatibility as well. Right now, I believe since the initial implementation of MLDv2, Linux hosts would just silently drop such MLDv2 queries instead of replying with an MLDv1 listener report, which would prevent a MLDv2 router going into fallback mode (until it receives other MLDv1 queries). Since the mapping of MRC to MRD in exactly such cases can make use of the exponential algorithm from 5.1.3, we cannot [strictly speaking] be aware in MLDv1 of the encoding in MRC, it seems also not mentioned by the RFC. Since encodings are the same up to 32767, assume in such a situation this value as a hard upper limit we would clamp. We have asked one of the RFC authors on that regard, and he mentioned that there seem not to be any implementations that make use of that exponential algorithm on startup messages. In any case, this patch fixes this MLD interoperability issue. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-20 20:03:55 +08:00
}
read_lock_bh(&idev->lock);
if (group_type == IPV6_ADDR_ANY) {
for (ma = idev->mc_list; ma; ma = ma->next) {
spin_lock_bh(&ma->mca_lock);
igmp6_group_queried(ma, max_delay);
spin_unlock_bh(&ma->mca_lock);
}
} else {
for (ma = idev->mc_list; ma; ma = ma->next) {
if (!ipv6_addr_equal(group, &ma->mca_addr))
continue;
spin_lock_bh(&ma->mca_lock);
if (ma->mca_flags & MAF_TIMER_RUNNING) {
/* gsquery <- gsquery && mark */
if (!mark)
ma->mca_flags &= ~MAF_GSQUERY;
} else {
/* gsquery <- mark */
if (mark)
ma->mca_flags |= MAF_GSQUERY;
else
ma->mca_flags &= ~MAF_GSQUERY;
}
if (!(ma->mca_flags & MAF_GSQUERY) ||
mld_marksources(ma, ntohs(mlh2->mld2q_nsrcs), mlh2->mld2q_srcs))
igmp6_group_queried(ma, max_delay);
spin_unlock_bh(&ma->mca_lock);
break;
}
}
read_unlock_bh(&idev->lock);
return 0;
}
/* called with rcu_read_lock() */
int igmp6_event_report(struct sk_buff *skb)
{
struct ifmcaddr6 *ma;
struct inet6_dev *idev;
struct mld_msg *mld;
int addr_type;
/* Our own report looped back. Ignore it. */
if (skb->pkt_type == PACKET_LOOPBACK)
return 0;
/* send our report if the MC router may not have heard this report */
if (skb->pkt_type != PACKET_MULTICAST &&
skb->pkt_type != PACKET_BROADCAST)
return 0;
if (!pskb_may_pull(skb, sizeof(*mld) - sizeof(struct icmp6hdr)))
return -EINVAL;
mld = (struct mld_msg *)icmp6_hdr(skb);
/* Drop reports with not link local source */
addr_type = ipv6_addr_type(&ipv6_hdr(skb)->saddr);
if (addr_type != IPV6_ADDR_ANY &&
!(addr_type&IPV6_ADDR_LINKLOCAL))
return -EINVAL;
idev = __in6_dev_get(skb->dev);
if (!idev)
return -ENODEV;
/*
* Cancel the timer for this group
*/
read_lock_bh(&idev->lock);
for (ma = idev->mc_list; ma; ma = ma->next) {
if (ipv6_addr_equal(&ma->mca_addr, &mld->mld_mca)) {
spin_lock(&ma->mca_lock);
if (del_timer(&ma->mca_timer))
refcount_dec(&ma->mca_refcnt);
ma->mca_flags &= ~(MAF_LAST_REPORTER|MAF_TIMER_RUNNING);
spin_unlock(&ma->mca_lock);
break;
}
}
read_unlock_bh(&idev->lock);
return 0;
}
static bool is_in(struct ifmcaddr6 *pmc, struct ip6_sf_list *psf, int type,
int gdeleted, int sdeleted)
{
switch (type) {
case MLD2_MODE_IS_INCLUDE:
case MLD2_MODE_IS_EXCLUDE:
if (gdeleted || sdeleted)
return false;
if (!((pmc->mca_flags & MAF_GSQUERY) && !psf->sf_gsresp)) {
if (pmc->mca_sfmode == MCAST_INCLUDE)
return true;
/* don't include if this source is excluded
* in all filters
*/
if (psf->sf_count[MCAST_INCLUDE])
return type == MLD2_MODE_IS_INCLUDE;
return pmc->mca_sfcount[MCAST_EXCLUDE] ==
psf->sf_count[MCAST_EXCLUDE];
}
return false;
case MLD2_CHANGE_TO_INCLUDE:
if (gdeleted || sdeleted)
return false;
return psf->sf_count[MCAST_INCLUDE] != 0;
case MLD2_CHANGE_TO_EXCLUDE:
if (gdeleted || sdeleted)
return false;
if (pmc->mca_sfcount[MCAST_EXCLUDE] == 0 ||
psf->sf_count[MCAST_INCLUDE])
return false;
return pmc->mca_sfcount[MCAST_EXCLUDE] ==
psf->sf_count[MCAST_EXCLUDE];
case MLD2_ALLOW_NEW_SOURCES:
if (gdeleted || !psf->sf_crcount)
return false;
return (pmc->mca_sfmode == MCAST_INCLUDE) ^ sdeleted;
case MLD2_BLOCK_OLD_SOURCES:
if (pmc->mca_sfmode == MCAST_INCLUDE)
return gdeleted || (psf->sf_crcount && sdeleted);
return psf->sf_crcount && !gdeleted && !sdeleted;
}
return false;
}
static int
mld_scount(struct ifmcaddr6 *pmc, int type, int gdeleted, int sdeleted)
{
struct ip6_sf_list *psf;
int scount = 0;
for (psf = pmc->mca_sources; psf; psf = psf->sf_next) {
if (!is_in(pmc, psf, type, gdeleted, sdeleted))
continue;
scount++;
}
return scount;
}
static void ip6_mc_hdr(struct sock *sk, struct sk_buff *skb,
struct net_device *dev,
const struct in6_addr *saddr,
const struct in6_addr *daddr,
int proto, int len)
{
struct ipv6hdr *hdr;
skb->protocol = htons(ETH_P_IPV6);
skb->dev = dev;
skb_reset_network_header(skb);
skb_put(skb, sizeof(struct ipv6hdr));
hdr = ipv6_hdr(skb);
ip6_flow_hdr(hdr, 0, 0);
hdr->payload_len = htons(len);
hdr->nexthdr = proto;
hdr->hop_limit = inet6_sk(sk)->hop_limit;
hdr->saddr = *saddr;
hdr->daddr = *daddr;
}
ipv6: mld: fix add_grhead skb_over_panic for devs with large MTUs It has been reported that generating an MLD listener report on devices with large MTUs (e.g. 9000) and a high number of IPv6 addresses can trigger a skb_over_panic(): skbuff: skb_over_panic: text:ffffffff80612a5d len:3776 put:20 head:ffff88046d751000 data:ffff88046d751010 tail:0xed0 end:0xec0 dev:port1 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:100! invalid opcode: 0000 [#1] SMP Modules linked in: ixgbe(O) CPU: 3 PID: 0 Comm: swapper/3 Tainted: G O 3.14.23+ #4 [...] Call Trace: <IRQ> [<ffffffff80578226>] ? skb_put+0x3a/0x3b [<ffffffff80612a5d>] ? add_grhead+0x45/0x8e [<ffffffff80612e3a>] ? add_grec+0x394/0x3d4 [<ffffffff80613222>] ? mld_ifc_timer_expire+0x195/0x20d [<ffffffff8061308d>] ? mld_dad_timer_expire+0x45/0x45 [<ffffffff80255b5d>] ? call_timer_fn.isra.29+0x12/0x68 [<ffffffff80255d16>] ? run_timer_softirq+0x163/0x182 [<ffffffff80250e6f>] ? __do_softirq+0xe0/0x21d [<ffffffff8025112b>] ? irq_exit+0x4e/0xd3 [<ffffffff802214bb>] ? smp_apic_timer_interrupt+0x3b/0x46 [<ffffffff8063f10a>] ? apic_timer_interrupt+0x6a/0x70 mld_newpack() skb allocations are usually requested with dev->mtu in size, since commit 72e09ad107e7 ("ipv6: avoid high order allocations") we have changed the limit in order to be less likely to fail. However, in MLD/IGMP code, we have some rather ugly AVAILABLE(skb) macros, which determine if we may end up doing an skb_put() for adding another record. To avoid possible fragmentation, we check the skb's tailroom as skb->dev->mtu - skb->len, which is a wrong assumption as the actual max allocation size can be much smaller. The IGMP case doesn't have this issue as commit 57e1ab6eaddc ("igmp: refine skb allocations") stores the allocation size in the cb[]. Set a reserved_tailroom to make it fit into the MTU and use skb_availroom() helper instead. This also allows to get rid of igmp_skb_size(). Reported-by: Wei Liu <lw1a2.jing@gmail.com> Fixes: 72e09ad107e7 ("ipv6: avoid high order allocations") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: David L Stevens <david.stevens@oracle.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06 03:27:38 +08:00
static struct sk_buff *mld_newpack(struct inet6_dev *idev, unsigned int mtu)
{
ipv6,mcast: always hold idev->lock before mca_lock dingtianhong reported the following deadlock detected by lockdep: ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.24.05-0.1-default #1 Not tainted ------------------------------------------------------- ksoftirqd/0/3 is trying to acquire lock: (&ndev->lock){+.+...}, at: [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 but task is already holding lock: (&mc->mca_lock){+.+...}, at: [<ffffffff8149d130>] mld_send_report+0x40/0x150 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&mc->mca_lock){+.+...}: [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f691a>] rt_spin_lock+0x4a/0x60 [<ffffffff8149e4bb>] igmp6_group_added+0x3b/0x120 [<ffffffff8149e5d8>] ipv6_mc_up+0x38/0x60 [<ffffffff81480a4d>] ipv6_find_idev+0x3d/0x80 [<ffffffff81483175>] addrconf_notify+0x3d5/0x4b0 [<ffffffff814fae3f>] notifier_call_chain+0x3f/0x80 [<ffffffff81073471>] raw_notifier_call_chain+0x11/0x20 [<ffffffff813d8722>] call_netdevice_notifiers+0x32/0x60 [<ffffffff813d92d4>] __dev_notify_flags+0x34/0x80 [<ffffffff813d9360>] dev_change_flags+0x40/0x70 [<ffffffff813ea627>] do_setlink+0x237/0x8a0 [<ffffffff813ebb6c>] rtnl_newlink+0x3ec/0x600 [<ffffffff813eb4d0>] rtnetlink_rcv_msg+0x160/0x310 [<ffffffff814040b9>] netlink_rcv_skb+0x89/0xb0 [<ffffffff813eb357>] rtnetlink_rcv+0x27/0x40 [<ffffffff81403e20>] netlink_unicast+0x140/0x180 [<ffffffff81404a9e>] netlink_sendmsg+0x33e/0x380 [<ffffffff813c4252>] sock_sendmsg+0x112/0x130 [<ffffffff813c537e>] __sys_sendmsg+0x44e/0x460 [<ffffffff813c5544>] sys_sendmsg+0x44/0x70 [<ffffffff814feab9>] system_call_fastpath+0x16/0x1b -> #0 (&ndev->lock){+.+...}: [<ffffffff810a798e>] check_prev_add+0x3de/0x440 [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f6c82>] rt_read_lock+0x42/0x60 [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 [<ffffffff8149b036>] mld_newpack+0xb6/0x160 [<ffffffff8149b18b>] add_grhead+0xab/0xc0 [<ffffffff8149d03b>] add_grec+0x3ab/0x460 [<ffffffff8149d14a>] mld_send_report+0x5a/0x150 [<ffffffff8149f99e>] igmp6_timer_handler+0x4e/0xb0 [<ffffffff8105705a>] call_timer_fn+0xca/0x1d0 [<ffffffff81057b9f>] run_timer_softirq+0x1df/0x2e0 [<ffffffff8104e8c7>] handle_pending_softirqs+0xf7/0x1f0 [<ffffffff8104ea3b>] __do_softirq_common+0x7b/0xf0 [<ffffffff8104f07f>] __thread_do_softirq+0x1af/0x210 [<ffffffff8104f1c1>] run_ksoftirqd+0xe1/0x1f0 [<ffffffff8106c7de>] kthread+0xae/0xc0 [<ffffffff814fff74>] kernel_thread_helper+0x4/0x10 actually we can just hold idev->lock before taking pmc->mca_lock, and avoid taking idev->lock again when iterating idev->addr_list, since the upper callers of mld_newpack() already take read_lock_bh(&idev->lock). Reported-by: dingtianhong <dingtianhong@huawei.com> Cc: dingtianhong <dingtianhong@huawei.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David S. Miller <davem@davemloft.net> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by: Ding Tianhong <dingtianhong@huawei.com> Tested-by: Chen Weilong <chenweilong@huawei.com> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-29 21:30:49 +08:00
struct net_device *dev = idev->dev;
struct net *net = dev_net(dev);
struct sock *sk = net->ipv6.igmp_sk;
struct sk_buff *skb;
struct mld2_report *pmr;
struct in6_addr addr_buf;
const struct in6_addr *saddr;
int hlen = LL_RESERVED_SPACE(dev);
int tlen = dev->needed_tailroom;
ipv6: mld: fix add_grhead skb_over_panic for devs with large MTUs It has been reported that generating an MLD listener report on devices with large MTUs (e.g. 9000) and a high number of IPv6 addresses can trigger a skb_over_panic(): skbuff: skb_over_panic: text:ffffffff80612a5d len:3776 put:20 head:ffff88046d751000 data:ffff88046d751010 tail:0xed0 end:0xec0 dev:port1 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:100! invalid opcode: 0000 [#1] SMP Modules linked in: ixgbe(O) CPU: 3 PID: 0 Comm: swapper/3 Tainted: G O 3.14.23+ #4 [...] Call Trace: <IRQ> [<ffffffff80578226>] ? skb_put+0x3a/0x3b [<ffffffff80612a5d>] ? add_grhead+0x45/0x8e [<ffffffff80612e3a>] ? add_grec+0x394/0x3d4 [<ffffffff80613222>] ? mld_ifc_timer_expire+0x195/0x20d [<ffffffff8061308d>] ? mld_dad_timer_expire+0x45/0x45 [<ffffffff80255b5d>] ? call_timer_fn.isra.29+0x12/0x68 [<ffffffff80255d16>] ? run_timer_softirq+0x163/0x182 [<ffffffff80250e6f>] ? __do_softirq+0xe0/0x21d [<ffffffff8025112b>] ? irq_exit+0x4e/0xd3 [<ffffffff802214bb>] ? smp_apic_timer_interrupt+0x3b/0x46 [<ffffffff8063f10a>] ? apic_timer_interrupt+0x6a/0x70 mld_newpack() skb allocations are usually requested with dev->mtu in size, since commit 72e09ad107e7 ("ipv6: avoid high order allocations") we have changed the limit in order to be less likely to fail. However, in MLD/IGMP code, we have some rather ugly AVAILABLE(skb) macros, which determine if we may end up doing an skb_put() for adding another record. To avoid possible fragmentation, we check the skb's tailroom as skb->dev->mtu - skb->len, which is a wrong assumption as the actual max allocation size can be much smaller. The IGMP case doesn't have this issue as commit 57e1ab6eaddc ("igmp: refine skb allocations") stores the allocation size in the cb[]. Set a reserved_tailroom to make it fit into the MTU and use skb_availroom() helper instead. This also allows to get rid of igmp_skb_size(). Reported-by: Wei Liu <lw1a2.jing@gmail.com> Fixes: 72e09ad107e7 ("ipv6: avoid high order allocations") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: David L Stevens <david.stevens@oracle.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06 03:27:38 +08:00
unsigned int size = mtu + hlen + tlen;
int err;
u8 ra[8] = { IPPROTO_ICMPV6, 0,
IPV6_TLV_ROUTERALERT, 2, 0, 0,
IPV6_TLV_PADN, 0 };
/* we assume size > sizeof(ra) here */
/* limit our allocations to order-0 page */
size = min_t(int, size, SKB_MAX_ORDER(0, 0));
skb = sock_alloc_send_skb(sk, size, 1, &err);
if (!skb)
return NULL;
skb->priority = TC_PRIO_CONTROL;
skb_reserve(skb, hlen);
mld, igmp: Fix reserved tailroom calculation The current reserved_tailroom calculation fails to take hlen and tlen into account. skb: [__hlen__|__data____________|__tlen___|__extra__] ^ ^ head skb_end_offset In this representation, hlen + data + tlen is the size passed to alloc_skb. "extra" is the extra space made available in __alloc_skb because of rounding up by kmalloc. We can reorder the representation like so: [__hlen__|__data____________|__extra__|__tlen___] ^ ^ head skb_end_offset The maximum space available for ip headers and payload without fragmentation is min(mtu, data + extra). Therefore, reserved_tailroom = data + extra + tlen - min(mtu, data + extra) = skb_end_offset - hlen - min(mtu, skb_end_offset - hlen - tlen) = skb_tailroom - min(mtu, skb_tailroom - tlen) ; after skb_reserve(hlen) Compare the second line to the current expression: reserved_tailroom = skb_end_offset - min(mtu, skb_end_offset) and we can see that hlen and tlen are not taken into account. The min() in the third line can be expanded into: if mtu < skb_tailroom - tlen: reserved_tailroom = skb_tailroom - mtu else: reserved_tailroom = tlen Depending on hlen, tlen, mtu and the number of multicast address records, the current code may output skbs that have less tailroom than dev->needed_tailroom or it may output more skbs than needed because not all space available is used. Fixes: 4c672e4b ("ipv6: mld: fix add_grhead skb_over_panic for devs with large MTUs") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01 07:03:33 +08:00
skb_tailroom_reserve(skb, mtu, tlen);
ipv6,mcast: always hold idev->lock before mca_lock dingtianhong reported the following deadlock detected by lockdep: ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.24.05-0.1-default #1 Not tainted ------------------------------------------------------- ksoftirqd/0/3 is trying to acquire lock: (&ndev->lock){+.+...}, at: [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 but task is already holding lock: (&mc->mca_lock){+.+...}, at: [<ffffffff8149d130>] mld_send_report+0x40/0x150 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&mc->mca_lock){+.+...}: [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f691a>] rt_spin_lock+0x4a/0x60 [<ffffffff8149e4bb>] igmp6_group_added+0x3b/0x120 [<ffffffff8149e5d8>] ipv6_mc_up+0x38/0x60 [<ffffffff81480a4d>] ipv6_find_idev+0x3d/0x80 [<ffffffff81483175>] addrconf_notify+0x3d5/0x4b0 [<ffffffff814fae3f>] notifier_call_chain+0x3f/0x80 [<ffffffff81073471>] raw_notifier_call_chain+0x11/0x20 [<ffffffff813d8722>] call_netdevice_notifiers+0x32/0x60 [<ffffffff813d92d4>] __dev_notify_flags+0x34/0x80 [<ffffffff813d9360>] dev_change_flags+0x40/0x70 [<ffffffff813ea627>] do_setlink+0x237/0x8a0 [<ffffffff813ebb6c>] rtnl_newlink+0x3ec/0x600 [<ffffffff813eb4d0>] rtnetlink_rcv_msg+0x160/0x310 [<ffffffff814040b9>] netlink_rcv_skb+0x89/0xb0 [<ffffffff813eb357>] rtnetlink_rcv+0x27/0x40 [<ffffffff81403e20>] netlink_unicast+0x140/0x180 [<ffffffff81404a9e>] netlink_sendmsg+0x33e/0x380 [<ffffffff813c4252>] sock_sendmsg+0x112/0x130 [<ffffffff813c537e>] __sys_sendmsg+0x44e/0x460 [<ffffffff813c5544>] sys_sendmsg+0x44/0x70 [<ffffffff814feab9>] system_call_fastpath+0x16/0x1b -> #0 (&ndev->lock){+.+...}: [<ffffffff810a798e>] check_prev_add+0x3de/0x440 [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f6c82>] rt_read_lock+0x42/0x60 [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 [<ffffffff8149b036>] mld_newpack+0xb6/0x160 [<ffffffff8149b18b>] add_grhead+0xab/0xc0 [<ffffffff8149d03b>] add_grec+0x3ab/0x460 [<ffffffff8149d14a>] mld_send_report+0x5a/0x150 [<ffffffff8149f99e>] igmp6_timer_handler+0x4e/0xb0 [<ffffffff8105705a>] call_timer_fn+0xca/0x1d0 [<ffffffff81057b9f>] run_timer_softirq+0x1df/0x2e0 [<ffffffff8104e8c7>] handle_pending_softirqs+0xf7/0x1f0 [<ffffffff8104ea3b>] __do_softirq_common+0x7b/0xf0 [<ffffffff8104f07f>] __thread_do_softirq+0x1af/0x210 [<ffffffff8104f1c1>] run_ksoftirqd+0xe1/0x1f0 [<ffffffff8106c7de>] kthread+0xae/0xc0 [<ffffffff814fff74>] kernel_thread_helper+0x4/0x10 actually we can just hold idev->lock before taking pmc->mca_lock, and avoid taking idev->lock again when iterating idev->addr_list, since the upper callers of mld_newpack() already take read_lock_bh(&idev->lock). Reported-by: dingtianhong <dingtianhong@huawei.com> Cc: dingtianhong <dingtianhong@huawei.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David S. Miller <davem@davemloft.net> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by: Ding Tianhong <dingtianhong@huawei.com> Tested-by: Chen Weilong <chenweilong@huawei.com> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-29 21:30:49 +08:00
if (__ipv6_get_lladdr(idev, &addr_buf, IFA_F_TENTATIVE)) {
/* <draft-ietf-magma-mld-source-05.txt>:
* use unspecified address as the source address
* when a valid link-local address is not available.
*/
saddr = &in6addr_any;
} else
saddr = &addr_buf;
ip6_mc_hdr(sk, skb, dev, saddr, &mld2_all_mcr, NEXTHDR_HOP, 0);
skb_put_data(skb, ra, sizeof(ra));
skb_set_transport_header(skb, skb_tail_pointer(skb) - skb->data);
skb_put(skb, sizeof(*pmr));
pmr = (struct mld2_report *)skb_transport_header(skb);
pmr->mld2r_type = ICMPV6_MLD2_REPORT;
pmr->mld2r_resv1 = 0;
pmr->mld2r_cksum = 0;
pmr->mld2r_resv2 = 0;
pmr->mld2r_ngrec = 0;
return skb;
}
static void mld_sendpack(struct sk_buff *skb)
{
struct ipv6hdr *pip6 = ipv6_hdr(skb);
struct mld2_report *pmr =
(struct mld2_report *)skb_transport_header(skb);
int payload_len, mldlen;
struct inet6_dev *idev;
struct net *net = dev_net(skb->dev);
int err;
struct flowi6 fl6;
struct dst_entry *dst;
rcu_read_lock();
idev = __in6_dev_get(skb->dev);
IP6_UPD_PO_STATS(net, idev, IPSTATS_MIB_OUT, skb->len);
payload_len = (skb_tail_pointer(skb) - skb_network_header(skb)) -
sizeof(*pip6);
mldlen = skb_tail_pointer(skb) - skb_transport_header(skb);
pip6->payload_len = htons(payload_len);
pmr->mld2r_cksum = csum_ipv6_magic(&pip6->saddr, &pip6->daddr, mldlen,
IPPROTO_ICMPV6,
csum_partial(skb_transport_header(skb),
mldlen, 0));
icmpv6_flow_init(net->ipv6.igmp_sk, &fl6, ICMPV6_MLD2_REPORT,
&ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr,
skb->dev->ifindex);
dst = icmp6_dst_alloc(skb->dev, &fl6);
err = 0;
if (IS_ERR(dst)) {
err = PTR_ERR(dst);
dst = NULL;
}
skb_dst_set(skb, dst);
if (err)
goto err_out;
payload_len = skb->len;
err = NF_HOOK(NFPROTO_IPV6, NF_INET_LOCAL_OUT,
2015-09-16 09:04:16 +08:00
net, net->ipv6.igmp_sk, skb, NULL, skb->dev,
dst_output);
out:
if (!err) {
ICMP6MSGOUT_INC_STATS(net, idev, ICMPV6_MLD2_REPORT);
ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTMSGS);
} else {
IP6_INC_STATS(net, idev, IPSTATS_MIB_OUTDISCARDS);
}
rcu_read_unlock();
return;
err_out:
kfree_skb(skb);
goto out;
}
static int grec_size(struct ifmcaddr6 *pmc, int type, int gdel, int sdel)
{
return sizeof(struct mld2_grec) + 16 * mld_scount(pmc,type,gdel,sdel);
}
static struct sk_buff *add_grhead(struct sk_buff *skb, struct ifmcaddr6 *pmc,
int type, struct mld2_grec **ppgr)
{
struct net_device *dev = pmc->idev->dev;
struct mld2_report *pmr;
struct mld2_grec *pgr;
if (!skb)
ipv6,mcast: always hold idev->lock before mca_lock dingtianhong reported the following deadlock detected by lockdep: ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.24.05-0.1-default #1 Not tainted ------------------------------------------------------- ksoftirqd/0/3 is trying to acquire lock: (&ndev->lock){+.+...}, at: [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 but task is already holding lock: (&mc->mca_lock){+.+...}, at: [<ffffffff8149d130>] mld_send_report+0x40/0x150 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&mc->mca_lock){+.+...}: [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f691a>] rt_spin_lock+0x4a/0x60 [<ffffffff8149e4bb>] igmp6_group_added+0x3b/0x120 [<ffffffff8149e5d8>] ipv6_mc_up+0x38/0x60 [<ffffffff81480a4d>] ipv6_find_idev+0x3d/0x80 [<ffffffff81483175>] addrconf_notify+0x3d5/0x4b0 [<ffffffff814fae3f>] notifier_call_chain+0x3f/0x80 [<ffffffff81073471>] raw_notifier_call_chain+0x11/0x20 [<ffffffff813d8722>] call_netdevice_notifiers+0x32/0x60 [<ffffffff813d92d4>] __dev_notify_flags+0x34/0x80 [<ffffffff813d9360>] dev_change_flags+0x40/0x70 [<ffffffff813ea627>] do_setlink+0x237/0x8a0 [<ffffffff813ebb6c>] rtnl_newlink+0x3ec/0x600 [<ffffffff813eb4d0>] rtnetlink_rcv_msg+0x160/0x310 [<ffffffff814040b9>] netlink_rcv_skb+0x89/0xb0 [<ffffffff813eb357>] rtnetlink_rcv+0x27/0x40 [<ffffffff81403e20>] netlink_unicast+0x140/0x180 [<ffffffff81404a9e>] netlink_sendmsg+0x33e/0x380 [<ffffffff813c4252>] sock_sendmsg+0x112/0x130 [<ffffffff813c537e>] __sys_sendmsg+0x44e/0x460 [<ffffffff813c5544>] sys_sendmsg+0x44/0x70 [<ffffffff814feab9>] system_call_fastpath+0x16/0x1b -> #0 (&ndev->lock){+.+...}: [<ffffffff810a798e>] check_prev_add+0x3de/0x440 [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f6c82>] rt_read_lock+0x42/0x60 [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 [<ffffffff8149b036>] mld_newpack+0xb6/0x160 [<ffffffff8149b18b>] add_grhead+0xab/0xc0 [<ffffffff8149d03b>] add_grec+0x3ab/0x460 [<ffffffff8149d14a>] mld_send_report+0x5a/0x150 [<ffffffff8149f99e>] igmp6_timer_handler+0x4e/0xb0 [<ffffffff8105705a>] call_timer_fn+0xca/0x1d0 [<ffffffff81057b9f>] run_timer_softirq+0x1df/0x2e0 [<ffffffff8104e8c7>] handle_pending_softirqs+0xf7/0x1f0 [<ffffffff8104ea3b>] __do_softirq_common+0x7b/0xf0 [<ffffffff8104f07f>] __thread_do_softirq+0x1af/0x210 [<ffffffff8104f1c1>] run_ksoftirqd+0xe1/0x1f0 [<ffffffff8106c7de>] kthread+0xae/0xc0 [<ffffffff814fff74>] kernel_thread_helper+0x4/0x10 actually we can just hold idev->lock before taking pmc->mca_lock, and avoid taking idev->lock again when iterating idev->addr_list, since the upper callers of mld_newpack() already take read_lock_bh(&idev->lock). Reported-by: dingtianhong <dingtianhong@huawei.com> Cc: dingtianhong <dingtianhong@huawei.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David S. Miller <davem@davemloft.net> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by: Ding Tianhong <dingtianhong@huawei.com> Tested-by: Chen Weilong <chenweilong@huawei.com> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-29 21:30:49 +08:00
skb = mld_newpack(pmc->idev, dev->mtu);
if (!skb)
return NULL;
pgr = skb_put(skb, sizeof(struct mld2_grec));
pgr->grec_type = type;
pgr->grec_auxwords = 0;
pgr->grec_nsrcs = 0;
pgr->grec_mca = pmc->mca_addr; /* structure copy */
pmr = (struct mld2_report *)skb_transport_header(skb);
pmr->mld2r_ngrec = htons(ntohs(pmr->mld2r_ngrec)+1);
*ppgr = pgr;
return skb;
}
ipv6: mld: fix add_grhead skb_over_panic for devs with large MTUs It has been reported that generating an MLD listener report on devices with large MTUs (e.g. 9000) and a high number of IPv6 addresses can trigger a skb_over_panic(): skbuff: skb_over_panic: text:ffffffff80612a5d len:3776 put:20 head:ffff88046d751000 data:ffff88046d751010 tail:0xed0 end:0xec0 dev:port1 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:100! invalid opcode: 0000 [#1] SMP Modules linked in: ixgbe(O) CPU: 3 PID: 0 Comm: swapper/3 Tainted: G O 3.14.23+ #4 [...] Call Trace: <IRQ> [<ffffffff80578226>] ? skb_put+0x3a/0x3b [<ffffffff80612a5d>] ? add_grhead+0x45/0x8e [<ffffffff80612e3a>] ? add_grec+0x394/0x3d4 [<ffffffff80613222>] ? mld_ifc_timer_expire+0x195/0x20d [<ffffffff8061308d>] ? mld_dad_timer_expire+0x45/0x45 [<ffffffff80255b5d>] ? call_timer_fn.isra.29+0x12/0x68 [<ffffffff80255d16>] ? run_timer_softirq+0x163/0x182 [<ffffffff80250e6f>] ? __do_softirq+0xe0/0x21d [<ffffffff8025112b>] ? irq_exit+0x4e/0xd3 [<ffffffff802214bb>] ? smp_apic_timer_interrupt+0x3b/0x46 [<ffffffff8063f10a>] ? apic_timer_interrupt+0x6a/0x70 mld_newpack() skb allocations are usually requested with dev->mtu in size, since commit 72e09ad107e7 ("ipv6: avoid high order allocations") we have changed the limit in order to be less likely to fail. However, in MLD/IGMP code, we have some rather ugly AVAILABLE(skb) macros, which determine if we may end up doing an skb_put() for adding another record. To avoid possible fragmentation, we check the skb's tailroom as skb->dev->mtu - skb->len, which is a wrong assumption as the actual max allocation size can be much smaller. The IGMP case doesn't have this issue as commit 57e1ab6eaddc ("igmp: refine skb allocations") stores the allocation size in the cb[]. Set a reserved_tailroom to make it fit into the MTU and use skb_availroom() helper instead. This also allows to get rid of igmp_skb_size(). Reported-by: Wei Liu <lw1a2.jing@gmail.com> Fixes: 72e09ad107e7 ("ipv6: avoid high order allocations") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: David L Stevens <david.stevens@oracle.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06 03:27:38 +08:00
#define AVAILABLE(skb) ((skb) ? skb_availroom(skb) : 0)
static struct sk_buff *add_grec(struct sk_buff *skb, struct ifmcaddr6 *pmc,
int type, int gdeleted, int sdeleted, int crsend)
{
ipv6,mcast: always hold idev->lock before mca_lock dingtianhong reported the following deadlock detected by lockdep: ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.24.05-0.1-default #1 Not tainted ------------------------------------------------------- ksoftirqd/0/3 is trying to acquire lock: (&ndev->lock){+.+...}, at: [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 but task is already holding lock: (&mc->mca_lock){+.+...}, at: [<ffffffff8149d130>] mld_send_report+0x40/0x150 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&mc->mca_lock){+.+...}: [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f691a>] rt_spin_lock+0x4a/0x60 [<ffffffff8149e4bb>] igmp6_group_added+0x3b/0x120 [<ffffffff8149e5d8>] ipv6_mc_up+0x38/0x60 [<ffffffff81480a4d>] ipv6_find_idev+0x3d/0x80 [<ffffffff81483175>] addrconf_notify+0x3d5/0x4b0 [<ffffffff814fae3f>] notifier_call_chain+0x3f/0x80 [<ffffffff81073471>] raw_notifier_call_chain+0x11/0x20 [<ffffffff813d8722>] call_netdevice_notifiers+0x32/0x60 [<ffffffff813d92d4>] __dev_notify_flags+0x34/0x80 [<ffffffff813d9360>] dev_change_flags+0x40/0x70 [<ffffffff813ea627>] do_setlink+0x237/0x8a0 [<ffffffff813ebb6c>] rtnl_newlink+0x3ec/0x600 [<ffffffff813eb4d0>] rtnetlink_rcv_msg+0x160/0x310 [<ffffffff814040b9>] netlink_rcv_skb+0x89/0xb0 [<ffffffff813eb357>] rtnetlink_rcv+0x27/0x40 [<ffffffff81403e20>] netlink_unicast+0x140/0x180 [<ffffffff81404a9e>] netlink_sendmsg+0x33e/0x380 [<ffffffff813c4252>] sock_sendmsg+0x112/0x130 [<ffffffff813c537e>] __sys_sendmsg+0x44e/0x460 [<ffffffff813c5544>] sys_sendmsg+0x44/0x70 [<ffffffff814feab9>] system_call_fastpath+0x16/0x1b -> #0 (&ndev->lock){+.+...}: [<ffffffff810a798e>] check_prev_add+0x3de/0x440 [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f6c82>] rt_read_lock+0x42/0x60 [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 [<ffffffff8149b036>] mld_newpack+0xb6/0x160 [<ffffffff8149b18b>] add_grhead+0xab/0xc0 [<ffffffff8149d03b>] add_grec+0x3ab/0x460 [<ffffffff8149d14a>] mld_send_report+0x5a/0x150 [<ffffffff8149f99e>] igmp6_timer_handler+0x4e/0xb0 [<ffffffff8105705a>] call_timer_fn+0xca/0x1d0 [<ffffffff81057b9f>] run_timer_softirq+0x1df/0x2e0 [<ffffffff8104e8c7>] handle_pending_softirqs+0xf7/0x1f0 [<ffffffff8104ea3b>] __do_softirq_common+0x7b/0xf0 [<ffffffff8104f07f>] __thread_do_softirq+0x1af/0x210 [<ffffffff8104f1c1>] run_ksoftirqd+0xe1/0x1f0 [<ffffffff8106c7de>] kthread+0xae/0xc0 [<ffffffff814fff74>] kernel_thread_helper+0x4/0x10 actually we can just hold idev->lock before taking pmc->mca_lock, and avoid taking idev->lock again when iterating idev->addr_list, since the upper callers of mld_newpack() already take read_lock_bh(&idev->lock). Reported-by: dingtianhong <dingtianhong@huawei.com> Cc: dingtianhong <dingtianhong@huawei.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David S. Miller <davem@davemloft.net> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by: Ding Tianhong <dingtianhong@huawei.com> Tested-by: Chen Weilong <chenweilong@huawei.com> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-29 21:30:49 +08:00
struct inet6_dev *idev = pmc->idev;
struct net_device *dev = idev->dev;
struct mld2_report *pmr;
struct mld2_grec *pgr = NULL;
struct ip6_sf_list *psf, *psf_next, *psf_prev, **psf_list;
int scount, stotal, first, isquery, truncate;
if (pmc->mca_flags & MAF_NOREPORT)
return skb;
isquery = type == MLD2_MODE_IS_INCLUDE ||
type == MLD2_MODE_IS_EXCLUDE;
truncate = type == MLD2_MODE_IS_EXCLUDE ||
type == MLD2_CHANGE_TO_EXCLUDE;
stotal = scount = 0;
psf_list = sdeleted ? &pmc->mca_tomb : &pmc->mca_sources;
if (!*psf_list)
goto empty_source;
pmr = skb ? (struct mld2_report *)skb_transport_header(skb) : NULL;
/* EX and TO_EX get a fresh packet, if needed */
if (truncate) {
if (pmr && pmr->mld2r_ngrec &&
AVAILABLE(skb) < grec_size(pmc, type, gdeleted, sdeleted)) {
if (skb)
mld_sendpack(skb);
ipv6,mcast: always hold idev->lock before mca_lock dingtianhong reported the following deadlock detected by lockdep: ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.24.05-0.1-default #1 Not tainted ------------------------------------------------------- ksoftirqd/0/3 is trying to acquire lock: (&ndev->lock){+.+...}, at: [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 but task is already holding lock: (&mc->mca_lock){+.+...}, at: [<ffffffff8149d130>] mld_send_report+0x40/0x150 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&mc->mca_lock){+.+...}: [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f691a>] rt_spin_lock+0x4a/0x60 [<ffffffff8149e4bb>] igmp6_group_added+0x3b/0x120 [<ffffffff8149e5d8>] ipv6_mc_up+0x38/0x60 [<ffffffff81480a4d>] ipv6_find_idev+0x3d/0x80 [<ffffffff81483175>] addrconf_notify+0x3d5/0x4b0 [<ffffffff814fae3f>] notifier_call_chain+0x3f/0x80 [<ffffffff81073471>] raw_notifier_call_chain+0x11/0x20 [<ffffffff813d8722>] call_netdevice_notifiers+0x32/0x60 [<ffffffff813d92d4>] __dev_notify_flags+0x34/0x80 [<ffffffff813d9360>] dev_change_flags+0x40/0x70 [<ffffffff813ea627>] do_setlink+0x237/0x8a0 [<ffffffff813ebb6c>] rtnl_newlink+0x3ec/0x600 [<ffffffff813eb4d0>] rtnetlink_rcv_msg+0x160/0x310 [<ffffffff814040b9>] netlink_rcv_skb+0x89/0xb0 [<ffffffff813eb357>] rtnetlink_rcv+0x27/0x40 [<ffffffff81403e20>] netlink_unicast+0x140/0x180 [<ffffffff81404a9e>] netlink_sendmsg+0x33e/0x380 [<ffffffff813c4252>] sock_sendmsg+0x112/0x130 [<ffffffff813c537e>] __sys_sendmsg+0x44e/0x460 [<ffffffff813c5544>] sys_sendmsg+0x44/0x70 [<ffffffff814feab9>] system_call_fastpath+0x16/0x1b -> #0 (&ndev->lock){+.+...}: [<ffffffff810a798e>] check_prev_add+0x3de/0x440 [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f6c82>] rt_read_lock+0x42/0x60 [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 [<ffffffff8149b036>] mld_newpack+0xb6/0x160 [<ffffffff8149b18b>] add_grhead+0xab/0xc0 [<ffffffff8149d03b>] add_grec+0x3ab/0x460 [<ffffffff8149d14a>] mld_send_report+0x5a/0x150 [<ffffffff8149f99e>] igmp6_timer_handler+0x4e/0xb0 [<ffffffff8105705a>] call_timer_fn+0xca/0x1d0 [<ffffffff81057b9f>] run_timer_softirq+0x1df/0x2e0 [<ffffffff8104e8c7>] handle_pending_softirqs+0xf7/0x1f0 [<ffffffff8104ea3b>] __do_softirq_common+0x7b/0xf0 [<ffffffff8104f07f>] __thread_do_softirq+0x1af/0x210 [<ffffffff8104f1c1>] run_ksoftirqd+0xe1/0x1f0 [<ffffffff8106c7de>] kthread+0xae/0xc0 [<ffffffff814fff74>] kernel_thread_helper+0x4/0x10 actually we can just hold idev->lock before taking pmc->mca_lock, and avoid taking idev->lock again when iterating idev->addr_list, since the upper callers of mld_newpack() already take read_lock_bh(&idev->lock). Reported-by: dingtianhong <dingtianhong@huawei.com> Cc: dingtianhong <dingtianhong@huawei.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David S. Miller <davem@davemloft.net> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by: Ding Tianhong <dingtianhong@huawei.com> Tested-by: Chen Weilong <chenweilong@huawei.com> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-29 21:30:49 +08:00
skb = mld_newpack(idev, dev->mtu);
}
}
first = 1;
psf_prev = NULL;
for (psf = *psf_list; psf; psf = psf_next) {
struct in6_addr *psrc;
psf_next = psf->sf_next;
if (!is_in(pmc, psf, type, gdeleted, sdeleted)) {
psf_prev = psf;
continue;
}
/* Based on RFC3810 6.1. Should not send source-list change
* records when there is a filter mode change.
*/
if (((gdeleted && pmc->mca_sfmode == MCAST_EXCLUDE) ||
(!gdeleted && pmc->mca_crcount)) &&
(type == MLD2_ALLOW_NEW_SOURCES ||
type == MLD2_BLOCK_OLD_SOURCES) && psf->sf_crcount)
goto decrease_sf_crcount;
/* clear marks on query responses */
if (isquery)
psf->sf_gsresp = 0;
if (AVAILABLE(skb) < sizeof(*psrc) +
first*sizeof(struct mld2_grec)) {
if (truncate && !first)
break; /* truncate these */
if (pgr)
pgr->grec_nsrcs = htons(scount);
if (skb)
mld_sendpack(skb);
ipv6,mcast: always hold idev->lock before mca_lock dingtianhong reported the following deadlock detected by lockdep: ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.24.05-0.1-default #1 Not tainted ------------------------------------------------------- ksoftirqd/0/3 is trying to acquire lock: (&ndev->lock){+.+...}, at: [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 but task is already holding lock: (&mc->mca_lock){+.+...}, at: [<ffffffff8149d130>] mld_send_report+0x40/0x150 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&mc->mca_lock){+.+...}: [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f691a>] rt_spin_lock+0x4a/0x60 [<ffffffff8149e4bb>] igmp6_group_added+0x3b/0x120 [<ffffffff8149e5d8>] ipv6_mc_up+0x38/0x60 [<ffffffff81480a4d>] ipv6_find_idev+0x3d/0x80 [<ffffffff81483175>] addrconf_notify+0x3d5/0x4b0 [<ffffffff814fae3f>] notifier_call_chain+0x3f/0x80 [<ffffffff81073471>] raw_notifier_call_chain+0x11/0x20 [<ffffffff813d8722>] call_netdevice_notifiers+0x32/0x60 [<ffffffff813d92d4>] __dev_notify_flags+0x34/0x80 [<ffffffff813d9360>] dev_change_flags+0x40/0x70 [<ffffffff813ea627>] do_setlink+0x237/0x8a0 [<ffffffff813ebb6c>] rtnl_newlink+0x3ec/0x600 [<ffffffff813eb4d0>] rtnetlink_rcv_msg+0x160/0x310 [<ffffffff814040b9>] netlink_rcv_skb+0x89/0xb0 [<ffffffff813eb357>] rtnetlink_rcv+0x27/0x40 [<ffffffff81403e20>] netlink_unicast+0x140/0x180 [<ffffffff81404a9e>] netlink_sendmsg+0x33e/0x380 [<ffffffff813c4252>] sock_sendmsg+0x112/0x130 [<ffffffff813c537e>] __sys_sendmsg+0x44e/0x460 [<ffffffff813c5544>] sys_sendmsg+0x44/0x70 [<ffffffff814feab9>] system_call_fastpath+0x16/0x1b -> #0 (&ndev->lock){+.+...}: [<ffffffff810a798e>] check_prev_add+0x3de/0x440 [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f6c82>] rt_read_lock+0x42/0x60 [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 [<ffffffff8149b036>] mld_newpack+0xb6/0x160 [<ffffffff8149b18b>] add_grhead+0xab/0xc0 [<ffffffff8149d03b>] add_grec+0x3ab/0x460 [<ffffffff8149d14a>] mld_send_report+0x5a/0x150 [<ffffffff8149f99e>] igmp6_timer_handler+0x4e/0xb0 [<ffffffff8105705a>] call_timer_fn+0xca/0x1d0 [<ffffffff81057b9f>] run_timer_softirq+0x1df/0x2e0 [<ffffffff8104e8c7>] handle_pending_softirqs+0xf7/0x1f0 [<ffffffff8104ea3b>] __do_softirq_common+0x7b/0xf0 [<ffffffff8104f07f>] __thread_do_softirq+0x1af/0x210 [<ffffffff8104f1c1>] run_ksoftirqd+0xe1/0x1f0 [<ffffffff8106c7de>] kthread+0xae/0xc0 [<ffffffff814fff74>] kernel_thread_helper+0x4/0x10 actually we can just hold idev->lock before taking pmc->mca_lock, and avoid taking idev->lock again when iterating idev->addr_list, since the upper callers of mld_newpack() already take read_lock_bh(&idev->lock). Reported-by: dingtianhong <dingtianhong@huawei.com> Cc: dingtianhong <dingtianhong@huawei.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David S. Miller <davem@davemloft.net> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by: Ding Tianhong <dingtianhong@huawei.com> Tested-by: Chen Weilong <chenweilong@huawei.com> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-29 21:30:49 +08:00
skb = mld_newpack(idev, dev->mtu);
first = 1;
scount = 0;
}
if (first) {
skb = add_grhead(skb, pmc, type, &pgr);
first = 0;
}
if (!skb)
return NULL;
psrc = skb_put(skb, sizeof(*psrc));
*psrc = psf->sf_addr;
scount++; stotal++;
if ((type == MLD2_ALLOW_NEW_SOURCES ||
type == MLD2_BLOCK_OLD_SOURCES) && psf->sf_crcount) {
decrease_sf_crcount:
psf->sf_crcount--;
if ((sdeleted || gdeleted) && psf->sf_crcount == 0) {
if (psf_prev)
psf_prev->sf_next = psf->sf_next;
else
*psf_list = psf->sf_next;
kfree(psf);
continue;
}
}
psf_prev = psf;
}
empty_source:
if (!stotal) {
if (type == MLD2_ALLOW_NEW_SOURCES ||
type == MLD2_BLOCK_OLD_SOURCES)
return skb;
if (pmc->mca_crcount || isquery || crsend) {
/* make sure we have room for group header */
if (skb && AVAILABLE(skb) < sizeof(struct mld2_grec)) {
mld_sendpack(skb);
skb = NULL; /* add_grhead will get a new one */
}
skb = add_grhead(skb, pmc, type, &pgr);
}
}
if (pgr)
pgr->grec_nsrcs = htons(scount);
if (isquery)
pmc->mca_flags &= ~MAF_GSQUERY; /* clear query state */
return skb;
}
static void mld_send_report(struct inet6_dev *idev, struct ifmcaddr6 *pmc)
{
struct sk_buff *skb = NULL;
int type;
ipv6,mcast: always hold idev->lock before mca_lock dingtianhong reported the following deadlock detected by lockdep: ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.24.05-0.1-default #1 Not tainted ------------------------------------------------------- ksoftirqd/0/3 is trying to acquire lock: (&ndev->lock){+.+...}, at: [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 but task is already holding lock: (&mc->mca_lock){+.+...}, at: [<ffffffff8149d130>] mld_send_report+0x40/0x150 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&mc->mca_lock){+.+...}: [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f691a>] rt_spin_lock+0x4a/0x60 [<ffffffff8149e4bb>] igmp6_group_added+0x3b/0x120 [<ffffffff8149e5d8>] ipv6_mc_up+0x38/0x60 [<ffffffff81480a4d>] ipv6_find_idev+0x3d/0x80 [<ffffffff81483175>] addrconf_notify+0x3d5/0x4b0 [<ffffffff814fae3f>] notifier_call_chain+0x3f/0x80 [<ffffffff81073471>] raw_notifier_call_chain+0x11/0x20 [<ffffffff813d8722>] call_netdevice_notifiers+0x32/0x60 [<ffffffff813d92d4>] __dev_notify_flags+0x34/0x80 [<ffffffff813d9360>] dev_change_flags+0x40/0x70 [<ffffffff813ea627>] do_setlink+0x237/0x8a0 [<ffffffff813ebb6c>] rtnl_newlink+0x3ec/0x600 [<ffffffff813eb4d0>] rtnetlink_rcv_msg+0x160/0x310 [<ffffffff814040b9>] netlink_rcv_skb+0x89/0xb0 [<ffffffff813eb357>] rtnetlink_rcv+0x27/0x40 [<ffffffff81403e20>] netlink_unicast+0x140/0x180 [<ffffffff81404a9e>] netlink_sendmsg+0x33e/0x380 [<ffffffff813c4252>] sock_sendmsg+0x112/0x130 [<ffffffff813c537e>] __sys_sendmsg+0x44e/0x460 [<ffffffff813c5544>] sys_sendmsg+0x44/0x70 [<ffffffff814feab9>] system_call_fastpath+0x16/0x1b -> #0 (&ndev->lock){+.+...}: [<ffffffff810a798e>] check_prev_add+0x3de/0x440 [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f6c82>] rt_read_lock+0x42/0x60 [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 [<ffffffff8149b036>] mld_newpack+0xb6/0x160 [<ffffffff8149b18b>] add_grhead+0xab/0xc0 [<ffffffff8149d03b>] add_grec+0x3ab/0x460 [<ffffffff8149d14a>] mld_send_report+0x5a/0x150 [<ffffffff8149f99e>] igmp6_timer_handler+0x4e/0xb0 [<ffffffff8105705a>] call_timer_fn+0xca/0x1d0 [<ffffffff81057b9f>] run_timer_softirq+0x1df/0x2e0 [<ffffffff8104e8c7>] handle_pending_softirqs+0xf7/0x1f0 [<ffffffff8104ea3b>] __do_softirq_common+0x7b/0xf0 [<ffffffff8104f07f>] __thread_do_softirq+0x1af/0x210 [<ffffffff8104f1c1>] run_ksoftirqd+0xe1/0x1f0 [<ffffffff8106c7de>] kthread+0xae/0xc0 [<ffffffff814fff74>] kernel_thread_helper+0x4/0x10 actually we can just hold idev->lock before taking pmc->mca_lock, and avoid taking idev->lock again when iterating idev->addr_list, since the upper callers of mld_newpack() already take read_lock_bh(&idev->lock). Reported-by: dingtianhong <dingtianhong@huawei.com> Cc: dingtianhong <dingtianhong@huawei.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David S. Miller <davem@davemloft.net> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by: Ding Tianhong <dingtianhong@huawei.com> Tested-by: Chen Weilong <chenweilong@huawei.com> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-29 21:30:49 +08:00
read_lock_bh(&idev->lock);
if (!pmc) {
for (pmc = idev->mc_list; pmc; pmc = pmc->next) {
if (pmc->mca_flags & MAF_NOREPORT)
continue;
spin_lock_bh(&pmc->mca_lock);
if (pmc->mca_sfcount[MCAST_EXCLUDE])
type = MLD2_MODE_IS_EXCLUDE;
else
type = MLD2_MODE_IS_INCLUDE;
skb = add_grec(skb, pmc, type, 0, 0, 0);
spin_unlock_bh(&pmc->mca_lock);
}
} else {
spin_lock_bh(&pmc->mca_lock);
if (pmc->mca_sfcount[MCAST_EXCLUDE])
type = MLD2_MODE_IS_EXCLUDE;
else
type = MLD2_MODE_IS_INCLUDE;
skb = add_grec(skb, pmc, type, 0, 0, 0);
spin_unlock_bh(&pmc->mca_lock);
}
ipv6,mcast: always hold idev->lock before mca_lock dingtianhong reported the following deadlock detected by lockdep: ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.24.05-0.1-default #1 Not tainted ------------------------------------------------------- ksoftirqd/0/3 is trying to acquire lock: (&ndev->lock){+.+...}, at: [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 but task is already holding lock: (&mc->mca_lock){+.+...}, at: [<ffffffff8149d130>] mld_send_report+0x40/0x150 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&mc->mca_lock){+.+...}: [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f691a>] rt_spin_lock+0x4a/0x60 [<ffffffff8149e4bb>] igmp6_group_added+0x3b/0x120 [<ffffffff8149e5d8>] ipv6_mc_up+0x38/0x60 [<ffffffff81480a4d>] ipv6_find_idev+0x3d/0x80 [<ffffffff81483175>] addrconf_notify+0x3d5/0x4b0 [<ffffffff814fae3f>] notifier_call_chain+0x3f/0x80 [<ffffffff81073471>] raw_notifier_call_chain+0x11/0x20 [<ffffffff813d8722>] call_netdevice_notifiers+0x32/0x60 [<ffffffff813d92d4>] __dev_notify_flags+0x34/0x80 [<ffffffff813d9360>] dev_change_flags+0x40/0x70 [<ffffffff813ea627>] do_setlink+0x237/0x8a0 [<ffffffff813ebb6c>] rtnl_newlink+0x3ec/0x600 [<ffffffff813eb4d0>] rtnetlink_rcv_msg+0x160/0x310 [<ffffffff814040b9>] netlink_rcv_skb+0x89/0xb0 [<ffffffff813eb357>] rtnetlink_rcv+0x27/0x40 [<ffffffff81403e20>] netlink_unicast+0x140/0x180 [<ffffffff81404a9e>] netlink_sendmsg+0x33e/0x380 [<ffffffff813c4252>] sock_sendmsg+0x112/0x130 [<ffffffff813c537e>] __sys_sendmsg+0x44e/0x460 [<ffffffff813c5544>] sys_sendmsg+0x44/0x70 [<ffffffff814feab9>] system_call_fastpath+0x16/0x1b -> #0 (&ndev->lock){+.+...}: [<ffffffff810a798e>] check_prev_add+0x3de/0x440 [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f6c82>] rt_read_lock+0x42/0x60 [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 [<ffffffff8149b036>] mld_newpack+0xb6/0x160 [<ffffffff8149b18b>] add_grhead+0xab/0xc0 [<ffffffff8149d03b>] add_grec+0x3ab/0x460 [<ffffffff8149d14a>] mld_send_report+0x5a/0x150 [<ffffffff8149f99e>] igmp6_timer_handler+0x4e/0xb0 [<ffffffff8105705a>] call_timer_fn+0xca/0x1d0 [<ffffffff81057b9f>] run_timer_softirq+0x1df/0x2e0 [<ffffffff8104e8c7>] handle_pending_softirqs+0xf7/0x1f0 [<ffffffff8104ea3b>] __do_softirq_common+0x7b/0xf0 [<ffffffff8104f07f>] __thread_do_softirq+0x1af/0x210 [<ffffffff8104f1c1>] run_ksoftirqd+0xe1/0x1f0 [<ffffffff8106c7de>] kthread+0xae/0xc0 [<ffffffff814fff74>] kernel_thread_helper+0x4/0x10 actually we can just hold idev->lock before taking pmc->mca_lock, and avoid taking idev->lock again when iterating idev->addr_list, since the upper callers of mld_newpack() already take read_lock_bh(&idev->lock). Reported-by: dingtianhong <dingtianhong@huawei.com> Cc: dingtianhong <dingtianhong@huawei.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David S. Miller <davem@davemloft.net> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by: Ding Tianhong <dingtianhong@huawei.com> Tested-by: Chen Weilong <chenweilong@huawei.com> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-29 21:30:49 +08:00
read_unlock_bh(&idev->lock);
if (skb)
mld_sendpack(skb);
}
/*
* remove zero-count source records from a source filter list
*/
static void mld_clear_zeros(struct ip6_sf_list **ppsf)
{
struct ip6_sf_list *psf_prev, *psf_next, *psf;
psf_prev = NULL;
for (psf = *ppsf; psf; psf = psf_next) {
psf_next = psf->sf_next;
if (psf->sf_crcount == 0) {
if (psf_prev)
psf_prev->sf_next = psf->sf_next;
else
*ppsf = psf->sf_next;
kfree(psf);
} else
psf_prev = psf;
}
}
static void mld_send_cr(struct inet6_dev *idev)
{
struct ifmcaddr6 *pmc, *pmc_prev, *pmc_next;
struct sk_buff *skb = NULL;
int type, dtype;
read_lock_bh(&idev->lock);
spin_lock(&idev->mc_lock);
/* deleted MCA's */
pmc_prev = NULL;
for (pmc = idev->mc_tomb; pmc; pmc = pmc_next) {
pmc_next = pmc->next;
if (pmc->mca_sfmode == MCAST_INCLUDE) {
type = MLD2_BLOCK_OLD_SOURCES;
dtype = MLD2_BLOCK_OLD_SOURCES;
skb = add_grec(skb, pmc, type, 1, 0, 0);
skb = add_grec(skb, pmc, dtype, 1, 1, 0);
}
if (pmc->mca_crcount) {
if (pmc->mca_sfmode == MCAST_EXCLUDE) {
type = MLD2_CHANGE_TO_INCLUDE;
skb = add_grec(skb, pmc, type, 1, 0, 0);
}
pmc->mca_crcount--;
if (pmc->mca_crcount == 0) {
mld_clear_zeros(&pmc->mca_tomb);
mld_clear_zeros(&pmc->mca_sources);
}
}
if (pmc->mca_crcount == 0 && !pmc->mca_tomb &&
!pmc->mca_sources) {
if (pmc_prev)
pmc_prev->next = pmc_next;
else
idev->mc_tomb = pmc_next;
in6_dev_put(pmc->idev);
kfree(pmc);
} else
pmc_prev = pmc;
}
spin_unlock(&idev->mc_lock);
/* change recs */
for (pmc = idev->mc_list; pmc; pmc = pmc->next) {
spin_lock_bh(&pmc->mca_lock);
if (pmc->mca_sfcount[MCAST_EXCLUDE]) {
type = MLD2_BLOCK_OLD_SOURCES;
dtype = MLD2_ALLOW_NEW_SOURCES;
} else {
type = MLD2_ALLOW_NEW_SOURCES;
dtype = MLD2_BLOCK_OLD_SOURCES;
}
skb = add_grec(skb, pmc, type, 0, 0, 0);
skb = add_grec(skb, pmc, dtype, 0, 1, 0); /* deleted sources */
/* filter mode changes */
if (pmc->mca_crcount) {
if (pmc->mca_sfmode == MCAST_EXCLUDE)
type = MLD2_CHANGE_TO_EXCLUDE;
else
type = MLD2_CHANGE_TO_INCLUDE;
skb = add_grec(skb, pmc, type, 0, 0, 0);
pmc->mca_crcount--;
}
spin_unlock_bh(&pmc->mca_lock);
}
read_unlock_bh(&idev->lock);
if (!skb)
return;
(void) mld_sendpack(skb);
}
static void igmp6_send(struct in6_addr *addr, struct net_device *dev, int type)
{
struct net *net = dev_net(dev);
struct sock *sk = net->ipv6.igmp_sk;
struct inet6_dev *idev;
struct sk_buff *skb;
struct mld_msg *hdr;
const struct in6_addr *snd_addr, *saddr;
struct in6_addr addr_buf;
int hlen = LL_RESERVED_SPACE(dev);
int tlen = dev->needed_tailroom;
int err, len, payload_len, full_len;
u8 ra[8] = { IPPROTO_ICMPV6, 0,
IPV6_TLV_ROUTERALERT, 2, 0, 0,
IPV6_TLV_PADN, 0 };
struct flowi6 fl6;
struct dst_entry *dst;
if (type == ICMPV6_MGM_REDUCTION)
snd_addr = &in6addr_linklocal_allrouters;
else
snd_addr = addr;
len = sizeof(struct icmp6hdr) + sizeof(struct in6_addr);
payload_len = len + sizeof(ra);
full_len = sizeof(struct ipv6hdr) + payload_len;
rcu_read_lock();
IP6_UPD_PO_STATS(net, __in6_dev_get(dev),
IPSTATS_MIB_OUT, full_len);
rcu_read_unlock();
skb = sock_alloc_send_skb(sk, hlen + tlen + full_len, 1, &err);
if (!skb) {
rcu_read_lock();
IP6_INC_STATS(net, __in6_dev_get(dev),
IPSTATS_MIB_OUTDISCARDS);
rcu_read_unlock();
return;
}
skb->priority = TC_PRIO_CONTROL;
skb_reserve(skb, hlen);
if (ipv6_get_lladdr(dev, &addr_buf, IFA_F_TENTATIVE)) {
/* <draft-ietf-magma-mld-source-05.txt>:
* use unspecified address as the source address
* when a valid link-local address is not available.
*/
saddr = &in6addr_any;
} else
saddr = &addr_buf;
ip6_mc_hdr(sk, skb, dev, saddr, snd_addr, NEXTHDR_HOP, payload_len);
skb_put_data(skb, ra, sizeof(ra));
hdr = skb_put_zero(skb, sizeof(struct mld_msg));
hdr->mld_type = type;
hdr->mld_mca = *addr;
hdr->mld_cksum = csum_ipv6_magic(saddr, snd_addr, len,
IPPROTO_ICMPV6,
csum_partial(hdr, len, 0));
rcu_read_lock();
idev = __in6_dev_get(skb->dev);
icmpv6_flow_init(sk, &fl6, type,
&ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr,
skb->dev->ifindex);
dst = icmp6_dst_alloc(skb->dev, &fl6);
if (IS_ERR(dst)) {
err = PTR_ERR(dst);
goto err_out;
}
skb_dst_set(skb, dst);
2015-09-16 09:04:16 +08:00
err = NF_HOOK(NFPROTO_IPV6, NF_INET_LOCAL_OUT,
net, sk, skb, NULL, skb->dev,
dst_output);
out:
if (!err) {
ICMP6MSGOUT_INC_STATS(net, idev, type);
ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTMSGS);
} else
IP6_INC_STATS(net, idev, IPSTATS_MIB_OUTDISCARDS);
rcu_read_unlock();
return;
err_out:
kfree_skb(skb);
goto out;
}
static void mld_send_initial_cr(struct inet6_dev *idev)
{
struct sk_buff *skb;
struct ifmcaddr6 *pmc;
int type;
if (mld_in_v1_mode(idev))
return;
skb = NULL;
read_lock_bh(&idev->lock);
for (pmc = idev->mc_list; pmc; pmc = pmc->next) {
spin_lock_bh(&pmc->mca_lock);
if (pmc->mca_sfcount[MCAST_EXCLUDE])
type = MLD2_CHANGE_TO_EXCLUDE;
else
type = MLD2_CHANGE_TO_INCLUDE;
skb = add_grec(skb, pmc, type, 0, 0, 1);
spin_unlock_bh(&pmc->mca_lock);
}
read_unlock_bh(&idev->lock);
if (skb)
mld_sendpack(skb);
}
void ipv6_mc_dad_complete(struct inet6_dev *idev)
{
idev->mc_dad_count = idev->mc_qrv;
if (idev->mc_dad_count) {
mld_send_initial_cr(idev);
idev->mc_dad_count--;
if (idev->mc_dad_count)
mld_dad_start_timer(idev, idev->mc_maxdelay);
}
}
static void mld_dad_timer_expire(unsigned long data)
{
struct inet6_dev *idev = (struct inet6_dev *)data;
mld_send_initial_cr(idev);
if (idev->mc_dad_count) {
idev->mc_dad_count--;
if (idev->mc_dad_count)
mld_dad_start_timer(idev, idev->mc_maxdelay);
}
in6_dev_put(idev);
}
static int ip6_mc_del1_src(struct ifmcaddr6 *pmc, int sfmode,
const struct in6_addr *psfsrc)
{
struct ip6_sf_list *psf, *psf_prev;
int rv = 0;
psf_prev = NULL;
for (psf = pmc->mca_sources; psf; psf = psf->sf_next) {
if (ipv6_addr_equal(&psf->sf_addr, psfsrc))
break;
psf_prev = psf;
}
if (!psf || psf->sf_count[sfmode] == 0) {
/* source filter not found, or count wrong => bug */
return -ESRCH;
}
psf->sf_count[sfmode]--;
if (!psf->sf_count[MCAST_INCLUDE] && !psf->sf_count[MCAST_EXCLUDE]) {
struct inet6_dev *idev = pmc->idev;
/* no more filters for this source */
if (psf_prev)
psf_prev->sf_next = psf->sf_next;
else
pmc->mca_sources = psf->sf_next;
if (psf->sf_oldin && !(pmc->mca_flags & MAF_NOREPORT) &&
!mld_in_v1_mode(idev)) {
psf->sf_crcount = idev->mc_qrv;
psf->sf_next = pmc->mca_tomb;
pmc->mca_tomb = psf;
rv = 1;
} else
kfree(psf);
}
return rv;
}
static int ip6_mc_del_src(struct inet6_dev *idev, const struct in6_addr *pmca,
int sfmode, int sfcount, const struct in6_addr *psfsrc,
int delta)
{
struct ifmcaddr6 *pmc;
int changerec = 0;
int i, err;
if (!idev)
return -ENODEV;
read_lock_bh(&idev->lock);
for (pmc = idev->mc_list; pmc; pmc = pmc->next) {
if (ipv6_addr_equal(pmca, &pmc->mca_addr))
break;
}
if (!pmc) {
/* MCA not found?? bug */
read_unlock_bh(&idev->lock);
return -ESRCH;
}
spin_lock_bh(&pmc->mca_lock);
sf_markstate(pmc);
if (!delta) {
if (!pmc->mca_sfcount[sfmode]) {
spin_unlock_bh(&pmc->mca_lock);
read_unlock_bh(&idev->lock);
return -EINVAL;
}
pmc->mca_sfcount[sfmode]--;
}
err = 0;
for (i = 0; i < sfcount; i++) {
int rv = ip6_mc_del1_src(pmc, sfmode, &psfsrc[i]);
changerec |= rv > 0;
if (!err && rv < 0)
err = rv;
}
if (pmc->mca_sfmode == MCAST_EXCLUDE &&
pmc->mca_sfcount[MCAST_EXCLUDE] == 0 &&
pmc->mca_sfcount[MCAST_INCLUDE]) {
struct ip6_sf_list *psf;
/* filter mode change */
pmc->mca_sfmode = MCAST_INCLUDE;
pmc->mca_crcount = idev->mc_qrv;
idev->mc_ifc_count = pmc->mca_crcount;
for (psf = pmc->mca_sources; psf; psf = psf->sf_next)
psf->sf_crcount = 0;
mld_ifc_event(pmc->idev);
} else if (sf_setstate(pmc) || changerec)
mld_ifc_event(pmc->idev);
spin_unlock_bh(&pmc->mca_lock);
read_unlock_bh(&idev->lock);
return err;
}
/*
* Add multicast single-source filter to the interface list
*/
static int ip6_mc_add1_src(struct ifmcaddr6 *pmc, int sfmode,
const struct in6_addr *psfsrc)
{
struct ip6_sf_list *psf, *psf_prev;
psf_prev = NULL;
for (psf = pmc->mca_sources; psf; psf = psf->sf_next) {
if (ipv6_addr_equal(&psf->sf_addr, psfsrc))
break;
psf_prev = psf;
}
if (!psf) {
psf = kzalloc(sizeof(*psf), GFP_ATOMIC);
if (!psf)
return -ENOBUFS;
psf->sf_addr = *psfsrc;
if (psf_prev) {
psf_prev->sf_next = psf;
} else
pmc->mca_sources = psf;
}
psf->sf_count[sfmode]++;
return 0;
}
static void sf_markstate(struct ifmcaddr6 *pmc)
{
struct ip6_sf_list *psf;
int mca_xcount = pmc->mca_sfcount[MCAST_EXCLUDE];
for (psf = pmc->mca_sources; psf; psf = psf->sf_next)
if (pmc->mca_sfcount[MCAST_EXCLUDE]) {
psf->sf_oldin = mca_xcount ==
psf->sf_count[MCAST_EXCLUDE] &&
!psf->sf_count[MCAST_INCLUDE];
} else
psf->sf_oldin = psf->sf_count[MCAST_INCLUDE] != 0;
}
static int sf_setstate(struct ifmcaddr6 *pmc)
{
struct ip6_sf_list *psf, *dpsf;
int mca_xcount = pmc->mca_sfcount[MCAST_EXCLUDE];
int qrv = pmc->idev->mc_qrv;
int new_in, rv;
rv = 0;
for (psf = pmc->mca_sources; psf; psf = psf->sf_next) {
if (pmc->mca_sfcount[MCAST_EXCLUDE]) {
new_in = mca_xcount == psf->sf_count[MCAST_EXCLUDE] &&
!psf->sf_count[MCAST_INCLUDE];
} else
new_in = psf->sf_count[MCAST_INCLUDE] != 0;
if (new_in) {
if (!psf->sf_oldin) {
struct ip6_sf_list *prev = NULL;
for (dpsf = pmc->mca_tomb; dpsf;
dpsf = dpsf->sf_next) {
if (ipv6_addr_equal(&dpsf->sf_addr,
&psf->sf_addr))
break;
prev = dpsf;
}
if (dpsf) {
if (prev)
prev->sf_next = dpsf->sf_next;
else
pmc->mca_tomb = dpsf->sf_next;
kfree(dpsf);
}
psf->sf_crcount = qrv;
rv++;
}
} else if (psf->sf_oldin) {
psf->sf_crcount = 0;
/*
* add or update "delete" records if an active filter
* is now inactive
*/
for (dpsf = pmc->mca_tomb; dpsf; dpsf = dpsf->sf_next)
if (ipv6_addr_equal(&dpsf->sf_addr,
&psf->sf_addr))
break;
if (!dpsf) {
dpsf = kmalloc(sizeof(*dpsf), GFP_ATOMIC);
if (!dpsf)
continue;
*dpsf = *psf;
/* pmc->mca_lock held by callers */
dpsf->sf_next = pmc->mca_tomb;
pmc->mca_tomb = dpsf;
}
dpsf->sf_crcount = qrv;
rv++;
}
}
return rv;
}
/*
* Add multicast source filter list to the interface list
*/
static int ip6_mc_add_src(struct inet6_dev *idev, const struct in6_addr *pmca,
int sfmode, int sfcount, const struct in6_addr *psfsrc,
int delta)
{
struct ifmcaddr6 *pmc;
int isexclude;
int i, err;
if (!idev)
return -ENODEV;
read_lock_bh(&idev->lock);
for (pmc = idev->mc_list; pmc; pmc = pmc->next) {
if (ipv6_addr_equal(pmca, &pmc->mca_addr))
break;
}
if (!pmc) {
/* MCA not found?? bug */
read_unlock_bh(&idev->lock);
return -ESRCH;
}
spin_lock_bh(&pmc->mca_lock);
sf_markstate(pmc);
isexclude = pmc->mca_sfmode == MCAST_EXCLUDE;
if (!delta)
pmc->mca_sfcount[sfmode]++;
err = 0;
for (i = 0; i < sfcount; i++) {
err = ip6_mc_add1_src(pmc, sfmode, &psfsrc[i]);
if (err)
break;
}
if (err) {
int j;
if (!delta)
pmc->mca_sfcount[sfmode]--;
for (j = 0; j < i; j++)
ip6_mc_del1_src(pmc, sfmode, &psfsrc[j]);
} else if (isexclude != (pmc->mca_sfcount[MCAST_EXCLUDE] != 0)) {
struct ip6_sf_list *psf;
/* filter mode change */
if (pmc->mca_sfcount[MCAST_EXCLUDE])
pmc->mca_sfmode = MCAST_EXCLUDE;
else if (pmc->mca_sfcount[MCAST_INCLUDE])
pmc->mca_sfmode = MCAST_INCLUDE;
/* else no filters; keep old mode for reports */
pmc->mca_crcount = idev->mc_qrv;
idev->mc_ifc_count = pmc->mca_crcount;
for (psf = pmc->mca_sources; psf; psf = psf->sf_next)
psf->sf_crcount = 0;
mld_ifc_event(idev);
} else if (sf_setstate(pmc))
mld_ifc_event(idev);
spin_unlock_bh(&pmc->mca_lock);
read_unlock_bh(&idev->lock);
return err;
}
static void ip6_mc_clear_src(struct ifmcaddr6 *pmc)
{
struct ip6_sf_list *psf, *nextpsf;
for (psf = pmc->mca_tomb; psf; psf = nextpsf) {
nextpsf = psf->sf_next;
kfree(psf);
}
pmc->mca_tomb = NULL;
for (psf = pmc->mca_sources; psf; psf = nextpsf) {
nextpsf = psf->sf_next;
kfree(psf);
}
pmc->mca_sources = NULL;
pmc->mca_sfmode = MCAST_EXCLUDE;
pmc->mca_sfcount[MCAST_INCLUDE] = 0;
pmc->mca_sfcount[MCAST_EXCLUDE] = 1;
}
static void igmp6_join_group(struct ifmcaddr6 *ma)
{
unsigned long delay;
if (ma->mca_flags & MAF_NOREPORT)
return;
igmp6_send(&ma->mca_addr, ma->idev->dev, ICMPV6_MGM_REPORT);
delay = prandom_u32() % unsolicited_report_interval(ma->idev);
spin_lock_bh(&ma->mca_lock);
if (del_timer(&ma->mca_timer)) {
refcount_dec(&ma->mca_refcnt);
delay = ma->mca_timer.expires - jiffies;
}
if (!mod_timer(&ma->mca_timer, jiffies + delay))
refcount_inc(&ma->mca_refcnt);
ma->mca_flags |= MAF_TIMER_RUNNING | MAF_LAST_REPORTER;
spin_unlock_bh(&ma->mca_lock);
}
static int ip6_mc_leave_src(struct sock *sk, struct ipv6_mc_socklist *iml,
struct inet6_dev *idev)
{
int err;
/* callers have the socket lock and rtnl lock
* so no other readers or writers of iml or its sflist
*/
if (!iml->sflist) {
/* any-source empty exclude case */
return ip6_mc_del_src(idev, &iml->addr, iml->sfmode, 0, NULL, 0);
}
err = ip6_mc_del_src(idev, &iml->addr, iml->sfmode,
iml->sflist->sl_count, iml->sflist->sl_addr, 0);
sock_kfree_s(sk, iml->sflist, IP6_SFLSIZE(iml->sflist->sl_max));
iml->sflist = NULL;
return err;
}
static void igmp6_leave_group(struct ifmcaddr6 *ma)
{
if (mld_in_v1_mode(ma->idev)) {
if (ma->mca_flags & MAF_LAST_REPORTER)
igmp6_send(&ma->mca_addr, ma->idev->dev,
ICMPV6_MGM_REDUCTION);
} else {
mld_add_delrec(ma->idev, ma);
mld_ifc_event(ma->idev);
}
}
static void mld_gq_timer_expire(unsigned long data)
{
struct inet6_dev *idev = (struct inet6_dev *)data;
idev->mc_gq_running = 0;
mld_send_report(idev, NULL);
in6_dev_put(idev);
}
static void mld_ifc_timer_expire(unsigned long data)
{
struct inet6_dev *idev = (struct inet6_dev *)data;
mld_send_cr(idev);
if (idev->mc_ifc_count) {
idev->mc_ifc_count--;
if (idev->mc_ifc_count)
mld_ifc_start_timer(idev, idev->mc_maxdelay);
}
in6_dev_put(idev);
}
static void mld_ifc_event(struct inet6_dev *idev)
{
if (mld_in_v1_mode(idev))
return;
idev->mc_ifc_count = idev->mc_qrv;
mld_ifc_start_timer(idev, 1);
}
static void igmp6_timer_handler(unsigned long data)
{
struct ifmcaddr6 *ma = (struct ifmcaddr6 *) data;
if (mld_in_v1_mode(ma->idev))
igmp6_send(&ma->mca_addr, ma->idev->dev, ICMPV6_MGM_REPORT);
else
mld_send_report(ma->idev, ma);
spin_lock(&ma->mca_lock);
ma->mca_flags |= MAF_LAST_REPORTER;
ma->mca_flags &= ~MAF_TIMER_RUNNING;
spin_unlock(&ma->mca_lock);
ma_put(ma);
}
/* Device changing type */
void ipv6_mc_unmap(struct inet6_dev *idev)
{
struct ifmcaddr6 *i;
/* Install multicast list, except for all-nodes (already installed) */
read_lock_bh(&idev->lock);
for (i = idev->mc_list; i; i = i->next)
igmp6_group_dropped(i);
read_unlock_bh(&idev->lock);
}
void ipv6_mc_remap(struct inet6_dev *idev)
{
ipv6_mc_up(idev);
}
/* Device going down */
void ipv6_mc_down(struct inet6_dev *idev)
{
struct ifmcaddr6 *i;
/* Withdraw multicast list */
read_lock_bh(&idev->lock);
for (i = idev->mc_list; i; i = i->next)
igmp6_group_dropped(i);
/* Should stop timer after group drop. or we will
* start timer again in mld_ifc_event()
*/
mld_ifc_stop_timer(idev);
mld_gq_stop_timer(idev);
mld_dad_stop_timer(idev);
read_unlock_bh(&idev->lock);
}
static void ipv6_mc_reset(struct inet6_dev *idev)
{
idev->mc_qrv = sysctl_mld_qrv;
idev->mc_qi = MLD_QI_DEFAULT;
idev->mc_qri = MLD_QRI_DEFAULT;
idev->mc_v1_seen = 0;
idev->mc_maxdelay = unsolicited_report_interval(idev);
}
/* Device going up */
void ipv6_mc_up(struct inet6_dev *idev)
{
struct ifmcaddr6 *i;
/* Install multicast list, except for all-nodes (already installed) */
read_lock_bh(&idev->lock);
ipv6_mc_reset(idev);
for (i = idev->mc_list; i; i = i->next) {
mld_del_delrec(idev, i);
igmp6_group_added(i);
}
read_unlock_bh(&idev->lock);
}
/* IPv6 device initialization. */
void ipv6_mc_init_dev(struct inet6_dev *idev)
{
write_lock_bh(&idev->lock);
spin_lock_init(&idev->mc_lock);
idev->mc_gq_running = 0;
setup_timer(&idev->mc_gq_timer, mld_gq_timer_expire,
(unsigned long)idev);
idev->mc_tomb = NULL;
idev->mc_ifc_count = 0;
setup_timer(&idev->mc_ifc_timer, mld_ifc_timer_expire,
(unsigned long)idev);
setup_timer(&idev->mc_dad_timer, mld_dad_timer_expire,
(unsigned long)idev);
ipv6_mc_reset(idev);
write_unlock_bh(&idev->lock);
}
/*
* Device is about to be destroyed: clean up.
*/
void ipv6_mc_destroy_dev(struct inet6_dev *idev)
{
struct ifmcaddr6 *i;
/* Deactivate timers */
ipv6_mc_down(idev);
mld_clear_delrec(idev);
/* Delete all-nodes address. */
/* We cannot call ipv6_dev_mc_dec() directly, our caller in
* addrconf.c has NULL'd out dev->ip6_ptr so in6_dev_get() will
* fail.
*/
__ipv6_dev_mc_dec(idev, &in6addr_linklocal_allnodes);
if (idev->cnf.forwarding)
__ipv6_dev_mc_dec(idev, &in6addr_linklocal_allrouters);
write_lock_bh(&idev->lock);
while ((i = idev->mc_list) != NULL) {
idev->mc_list = i->next;
write_unlock_bh(&idev->lock);
ma_put(i);
write_lock_bh(&idev->lock);
}
write_unlock_bh(&idev->lock);
}
static void ipv6_mc_rejoin_groups(struct inet6_dev *idev)
{
struct ifmcaddr6 *pmc;
ASSERT_RTNL();
if (mld_in_v1_mode(idev)) {
read_lock_bh(&idev->lock);
for (pmc = idev->mc_list; pmc; pmc = pmc->next)
igmp6_join_group(pmc);
read_unlock_bh(&idev->lock);
} else
mld_send_report(idev, NULL);
}
static int ipv6_mc_netdev_event(struct notifier_block *this,
unsigned long event,
void *ptr)
{
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
struct inet6_dev *idev = __in6_dev_get(dev);
switch (event) {
case NETDEV_RESEND_IGMP:
if (idev)
ipv6_mc_rejoin_groups(idev);
break;
default:
break;
}
return NOTIFY_DONE;
}
static struct notifier_block igmp6_netdev_notifier = {
.notifier_call = ipv6_mc_netdev_event,
};
#ifdef CONFIG_PROC_FS
struct igmp6_mc_iter_state {
struct seq_net_private p;
struct net_device *dev;
struct inet6_dev *idev;
};
#define igmp6_mc_seq_private(seq) ((struct igmp6_mc_iter_state *)(seq)->private)
static inline struct ifmcaddr6 *igmp6_mc_get_first(struct seq_file *seq)
{
struct ifmcaddr6 *im = NULL;
struct igmp6_mc_iter_state *state = igmp6_mc_seq_private(seq);
struct net *net = seq_file_net(seq);
state->idev = NULL;
for_each_netdev_rcu(net, state->dev) {
struct inet6_dev *idev;
idev = __in6_dev_get(state->dev);
if (!idev)
continue;
read_lock_bh(&idev->lock);
im = idev->mc_list;
if (im) {
state->idev = idev;
break;
}
read_unlock_bh(&idev->lock);
}
return im;
}
static struct ifmcaddr6 *igmp6_mc_get_next(struct seq_file *seq, struct ifmcaddr6 *im)
{
struct igmp6_mc_iter_state *state = igmp6_mc_seq_private(seq);
im = im->next;
while (!im) {
if (likely(state->idev))
read_unlock_bh(&state->idev->lock);
state->dev = next_net_device_rcu(state->dev);
if (!state->dev) {
state->idev = NULL;
break;
}
state->idev = __in6_dev_get(state->dev);
if (!state->idev)
continue;
read_lock_bh(&state->idev->lock);
im = state->idev->mc_list;
}
return im;
}
static struct ifmcaddr6 *igmp6_mc_get_idx(struct seq_file *seq, loff_t pos)
{
struct ifmcaddr6 *im = igmp6_mc_get_first(seq);
if (im)
while (pos && (im = igmp6_mc_get_next(seq, im)) != NULL)
--pos;
return pos ? NULL : im;
}
static void *igmp6_mc_seq_start(struct seq_file *seq, loff_t *pos)
__acquires(RCU)
{
rcu_read_lock();
return igmp6_mc_get_idx(seq, *pos);
}
static void *igmp6_mc_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
struct ifmcaddr6 *im = igmp6_mc_get_next(seq, v);
++*pos;
return im;
}
static void igmp6_mc_seq_stop(struct seq_file *seq, void *v)
__releases(RCU)
{
struct igmp6_mc_iter_state *state = igmp6_mc_seq_private(seq);
if (likely(state->idev)) {
read_unlock_bh(&state->idev->lock);
state->idev = NULL;
}
state->dev = NULL;
rcu_read_unlock();
}
static int igmp6_mc_seq_show(struct seq_file *seq, void *v)
{
struct ifmcaddr6 *im = (struct ifmcaddr6 *)v;
struct igmp6_mc_iter_state *state = igmp6_mc_seq_private(seq);
seq_printf(seq,
"%-4d %-15s %pi6 %5d %08X %ld\n",
state->dev->ifindex, state->dev->name,
&im->mca_addr,
im->mca_users, im->mca_flags,
(im->mca_flags&MAF_TIMER_RUNNING) ?
jiffies_to_clock_t(im->mca_timer.expires-jiffies) : 0);
return 0;
}
static const struct seq_operations igmp6_mc_seq_ops = {
.start = igmp6_mc_seq_start,
.next = igmp6_mc_seq_next,
.stop = igmp6_mc_seq_stop,
.show = igmp6_mc_seq_show,
};
static int igmp6_mc_seq_open(struct inode *inode, struct file *file)
{
return seq_open_net(inode, file, &igmp6_mc_seq_ops,
sizeof(struct igmp6_mc_iter_state));
}
static const struct file_operations igmp6_mc_seq_fops = {
.owner = THIS_MODULE,
.open = igmp6_mc_seq_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release_net,
};
struct igmp6_mcf_iter_state {
struct seq_net_private p;
struct net_device *dev;
struct inet6_dev *idev;
struct ifmcaddr6 *im;
};
#define igmp6_mcf_seq_private(seq) ((struct igmp6_mcf_iter_state *)(seq)->private)
static inline struct ip6_sf_list *igmp6_mcf_get_first(struct seq_file *seq)
{
struct ip6_sf_list *psf = NULL;
struct ifmcaddr6 *im = NULL;
struct igmp6_mcf_iter_state *state = igmp6_mcf_seq_private(seq);
struct net *net = seq_file_net(seq);
state->idev = NULL;
state->im = NULL;
for_each_netdev_rcu(net, state->dev) {
struct inet6_dev *idev;
idev = __in6_dev_get(state->dev);
if (unlikely(idev == NULL))
continue;
read_lock_bh(&idev->lock);
im = idev->mc_list;
if (likely(im)) {
spin_lock_bh(&im->mca_lock);
psf = im->mca_sources;
if (likely(psf)) {
state->im = im;
state->idev = idev;
break;
}
spin_unlock_bh(&im->mca_lock);
}
read_unlock_bh(&idev->lock);
}
return psf;
}
static struct ip6_sf_list *igmp6_mcf_get_next(struct seq_file *seq, struct ip6_sf_list *psf)
{
struct igmp6_mcf_iter_state *state = igmp6_mcf_seq_private(seq);
psf = psf->sf_next;
while (!psf) {
spin_unlock_bh(&state->im->mca_lock);
state->im = state->im->next;
while (!state->im) {
if (likely(state->idev))
read_unlock_bh(&state->idev->lock);
state->dev = next_net_device_rcu(state->dev);
if (!state->dev) {
state->idev = NULL;
goto out;
}
state->idev = __in6_dev_get(state->dev);
if (!state->idev)
continue;
read_lock_bh(&state->idev->lock);
state->im = state->idev->mc_list;
}
if (!state->im)
break;
spin_lock_bh(&state->im->mca_lock);
psf = state->im->mca_sources;
}
out:
return psf;
}
static struct ip6_sf_list *igmp6_mcf_get_idx(struct seq_file *seq, loff_t pos)
{
struct ip6_sf_list *psf = igmp6_mcf_get_first(seq);
if (psf)
while (pos && (psf = igmp6_mcf_get_next(seq, psf)) != NULL)
--pos;
return pos ? NULL : psf;
}
static void *igmp6_mcf_seq_start(struct seq_file *seq, loff_t *pos)
__acquires(RCU)
{
rcu_read_lock();
return *pos ? igmp6_mcf_get_idx(seq, *pos - 1) : SEQ_START_TOKEN;
}
static void *igmp6_mcf_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
struct ip6_sf_list *psf;
if (v == SEQ_START_TOKEN)
psf = igmp6_mcf_get_first(seq);
else
psf = igmp6_mcf_get_next(seq, v);
++*pos;
return psf;
}
static void igmp6_mcf_seq_stop(struct seq_file *seq, void *v)
__releases(RCU)
{
struct igmp6_mcf_iter_state *state = igmp6_mcf_seq_private(seq);
if (likely(state->im)) {
spin_unlock_bh(&state->im->mca_lock);
state->im = NULL;
}
if (likely(state->idev)) {
read_unlock_bh(&state->idev->lock);
state->idev = NULL;
}
state->dev = NULL;
rcu_read_unlock();
}
static int igmp6_mcf_seq_show(struct seq_file *seq, void *v)
{
struct ip6_sf_list *psf = (struct ip6_sf_list *)v;
struct igmp6_mcf_iter_state *state = igmp6_mcf_seq_private(seq);
if (v == SEQ_START_TOKEN) {
seq_puts(seq, "Idx Device Multicast Address Source Address INC EXC\n");
} else {
seq_printf(seq,
"%3d %6.6s %pi6 %pi6 %6lu %6lu\n",
state->dev->ifindex, state->dev->name,
&state->im->mca_addr,
&psf->sf_addr,
psf->sf_count[MCAST_INCLUDE],
psf->sf_count[MCAST_EXCLUDE]);
}
return 0;
}
static const struct seq_operations igmp6_mcf_seq_ops = {
.start = igmp6_mcf_seq_start,
.next = igmp6_mcf_seq_next,
.stop = igmp6_mcf_seq_stop,
.show = igmp6_mcf_seq_show,
};
static int igmp6_mcf_seq_open(struct inode *inode, struct file *file)
{
return seq_open_net(inode, file, &igmp6_mcf_seq_ops,
sizeof(struct igmp6_mcf_iter_state));
}
static const struct file_operations igmp6_mcf_seq_fops = {
.owner = THIS_MODULE,
.open = igmp6_mcf_seq_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release_net,
};
static int __net_init igmp6_proc_init(struct net *net)
{
int err;
err = -ENOMEM;
if (!proc_create("igmp6", S_IRUGO, net->proc_net, &igmp6_mc_seq_fops))
goto out;
if (!proc_create("mcfilter6", S_IRUGO, net->proc_net,
&igmp6_mcf_seq_fops))
goto out_proc_net_igmp6;
err = 0;
out:
return err;
out_proc_net_igmp6:
remove_proc_entry("igmp6", net->proc_net);
goto out;
}
static void __net_exit igmp6_proc_exit(struct net *net)
{
remove_proc_entry("mcfilter6", net->proc_net);
remove_proc_entry("igmp6", net->proc_net);
}
#else
static inline int igmp6_proc_init(struct net *net)
{
return 0;
}
static inline void igmp6_proc_exit(struct net *net)
{
}
#endif
static int __net_init igmp6_net_init(struct net *net)
{
int err;
err = inet_ctl_sock_create(&net->ipv6.igmp_sk, PF_INET6,
SOCK_RAW, IPPROTO_ICMPV6, net);
if (err < 0) {
pr_err("Failed to initialize the IGMP6 control socket (err %d)\n",
err);
goto out;
}
inet6_sk(net->ipv6.igmp_sk)->hop_limit = 1;
err = inet_ctl_sock_create(&net->ipv6.mc_autojoin_sk, PF_INET6,
SOCK_RAW, IPPROTO_ICMPV6, net);
if (err < 0) {
pr_err("Failed to initialize the IGMP6 autojoin socket (err %d)\n",
err);
goto out_sock_create;
}
err = igmp6_proc_init(net);
if (err)
goto out_sock_create_autojoin;
return 0;
out_sock_create_autojoin:
inet_ctl_sock_destroy(net->ipv6.mc_autojoin_sk);
out_sock_create:
inet_ctl_sock_destroy(net->ipv6.igmp_sk);
out:
return err;
}
static void __net_exit igmp6_net_exit(struct net *net)
{
inet_ctl_sock_destroy(net->ipv6.igmp_sk);
inet_ctl_sock_destroy(net->ipv6.mc_autojoin_sk);
igmp6_proc_exit(net);
}
static struct pernet_operations igmp6_net_ops = {
.init = igmp6_net_init,
.exit = igmp6_net_exit,
};
int __init igmp6_init(void)
{
return register_pernet_subsys(&igmp6_net_ops);
}
int __init igmp6_late_init(void)
{
return register_netdevice_notifier(&igmp6_netdev_notifier);
}
void igmp6_cleanup(void)
{
unregister_pernet_subsys(&igmp6_net_ops);
}
void igmp6_late_cleanup(void)
{
unregister_netdevice_notifier(&igmp6_netdev_notifier);
}