OpenCloudOS-Kernel/drivers/md/md-cluster.c

1419 lines
39 KiB
C
Raw Normal View History

/*
* Copyright (C) 2015, SUSE
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
*/
#include <linux/module.h>
md-cluster: introduce dlm_lock_sync_interruptible to fix tasks hang When some node leaves cluster, then it's bitmap need to be synced by another node, so "md*_recover" thread is triggered for the purpose. However, with below steps. we can find tasks hang happened either in B or C. 1. Node A create a resyncing cluster raid1, assemble it in other two nodes (B and C). 2. stop array in B and C. 3. stop array in A. linux44:~ # ps aux|grep md|grep D root 5938 0.0 0.1 19852 1964 pts/0 D+ 14:52 0:00 mdadm -S md0 root 5939 0.0 0.0 0 0 ? D 14:52 0:00 [md0_recover] linux44:~ # cat /proc/5939/stack [<ffffffffa04cf321>] dlm_lock_sync+0x71/0x90 [md_cluster] [<ffffffffa04d0705>] recover_bitmaps+0x125/0x220 [md_cluster] [<ffffffffa052105d>] md_thread+0x16d/0x180 [md_mod] [<ffffffff8107ad94>] kthread+0xb4/0xc0 [<ffffffff8152a518>] ret_from_fork+0x58/0x90 linux44:~ # cat /proc/5938/stack [<ffffffff8107afde>] kthread_stop+0x6e/0x120 [<ffffffffa0519da0>] md_unregister_thread+0x40/0x80 [md_mod] [<ffffffffa04cfd20>] leave+0x70/0x120 [md_cluster] [<ffffffffa0525e24>] md_cluster_stop+0x14/0x30 [md_mod] [<ffffffffa05269ab>] bitmap_free+0x14b/0x150 [md_mod] [<ffffffffa0523f3b>] do_md_stop+0x35b/0x5a0 [md_mod] [<ffffffffa0524e83>] md_ioctl+0x873/0x1590 [md_mod] [<ffffffff81288464>] blkdev_ioctl+0x214/0x7d0 [<ffffffff811dd3dd>] block_ioctl+0x3d/0x40 [<ffffffff811b92d4>] do_vfs_ioctl+0x2d4/0x4b0 [<ffffffff811b9538>] SyS_ioctl+0x88/0xa0 [<ffffffff8152a5c9>] system_call_fastpath+0x16/0x1b The problem is caused by recover_bitmaps can't reliably abort when the thread is unregistered. So dlm_lock_sync_interruptible is introduced to detect the thread's situation to fix the problem. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-08-12 13:42:42 +08:00
#include <linux/kthread.h>
#include <linux/dlm.h>
#include <linux/sched.h>
#include <linux/raid/md_p.h>
#include "md.h"
#include "bitmap.h"
#include "md-cluster.h"
#define LVB_SIZE 64
#define NEW_DEV_TIMEOUT 5000
struct dlm_lock_resource {
dlm_lockspace_t *ls;
struct dlm_lksb lksb;
char *name; /* lock name. */
uint32_t flags; /* flags to pass to dlm_lock() */
wait_queue_head_t sync_locking; /* wait queue for synchronized locking */
bool sync_locking_done;
void (*bast)(void *arg, int mode); /* blocking AST function pointer*/
struct mddev *mddev; /* pointing back to mddev. */
int mode;
};
struct suspend_info {
int slot;
sector_t lo;
sector_t hi;
struct list_head list;
};
struct resync_info {
__le64 lo;
__le64 hi;
};
/* md_cluster_info flags */
#define MD_CLUSTER_WAITING_FOR_NEWDISK 1
#define MD_CLUSTER_SUSPEND_READ_BALANCING 2
#define MD_CLUSTER_BEGIN_JOIN_CLUSTER 3
/* Lock the send communication. This is done through
* bit manipulation as opposed to a mutex in order to
* accomodate lock and hold. See next comment.
*/
#define MD_CLUSTER_SEND_LOCK 4
/* If cluster operations (such as adding a disk) must lock the
* communication channel, so as to perform extra operations
* (update metadata) and no other operation is allowed on the
* MD. Token needs to be locked and held until the operation
* completes witha md_update_sb(), which would eventually release
* the lock.
*/
#define MD_CLUSTER_SEND_LOCKED_ALREADY 5
/* We should receive message after node joined cluster and
* set up all the related infos such as bitmap and personality */
#define MD_CLUSTER_ALREADY_IN_CLUSTER 6
#define MD_CLUSTER_PENDING_RECV_EVENT 7
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
#define MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD 8
struct md_cluster_info {
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
struct mddev *mddev; /* the md device which md_cluster_info belongs to */
/* dlm lock space and resources for clustered raid. */
dlm_lockspace_t *lockspace;
int slot_number;
struct completion completion;
struct mutex recv_mutex;
struct dlm_lock_resource *bitmap_lockres;
struct dlm_lock_resource **other_bitmap_lockres;
struct dlm_lock_resource *resync_lockres;
struct list_head suspend_list;
spinlock_t suspend_lock;
struct md_thread *recovery_thread;
unsigned long recovery_map;
/* communication loc resources */
struct dlm_lock_resource *ack_lockres;
struct dlm_lock_resource *message_lockres;
struct dlm_lock_resource *token_lockres;
struct dlm_lock_resource *no_new_dev_lockres;
struct md_thread *recv_thread;
struct completion newdisk_completion;
wait_queue_head_t wait;
unsigned long state;
/* record the region in RESYNCING message */
sector_t sync_low;
sector_t sync_hi;
};
enum msg_type {
METADATA_UPDATED = 0,
RESYNCING,
NEWDISK,
REMOVE,
RE_ADD,
BITMAP_NEEDS_SYNC,
CHANGE_CAPACITY,
};
struct cluster_msg {
__le32 type;
__le32 slot;
/* TODO: Unionize this for smaller footprint */
__le64 low;
__le64 high;
char uuid[16];
__le32 raid_slot;
};
static void sync_ast(void *arg)
{
struct dlm_lock_resource *res;
res = arg;
res->sync_locking_done = true;
wake_up(&res->sync_locking);
}
static int dlm_lock_sync(struct dlm_lock_resource *res, int mode)
{
int ret = 0;
ret = dlm_lock(res->ls, mode, &res->lksb,
res->flags, res->name, strlen(res->name),
0, sync_ast, res, res->bast);
if (ret)
return ret;
wait_event(res->sync_locking, res->sync_locking_done);
res->sync_locking_done = false;
if (res->lksb.sb_status == 0)
res->mode = mode;
return res->lksb.sb_status;
}
static int dlm_unlock_sync(struct dlm_lock_resource *res)
{
return dlm_lock_sync(res, DLM_LOCK_NL);
}
md-cluster: introduce dlm_lock_sync_interruptible to fix tasks hang When some node leaves cluster, then it's bitmap need to be synced by another node, so "md*_recover" thread is triggered for the purpose. However, with below steps. we can find tasks hang happened either in B or C. 1. Node A create a resyncing cluster raid1, assemble it in other two nodes (B and C). 2. stop array in B and C. 3. stop array in A. linux44:~ # ps aux|grep md|grep D root 5938 0.0 0.1 19852 1964 pts/0 D+ 14:52 0:00 mdadm -S md0 root 5939 0.0 0.0 0 0 ? D 14:52 0:00 [md0_recover] linux44:~ # cat /proc/5939/stack [<ffffffffa04cf321>] dlm_lock_sync+0x71/0x90 [md_cluster] [<ffffffffa04d0705>] recover_bitmaps+0x125/0x220 [md_cluster] [<ffffffffa052105d>] md_thread+0x16d/0x180 [md_mod] [<ffffffff8107ad94>] kthread+0xb4/0xc0 [<ffffffff8152a518>] ret_from_fork+0x58/0x90 linux44:~ # cat /proc/5938/stack [<ffffffff8107afde>] kthread_stop+0x6e/0x120 [<ffffffffa0519da0>] md_unregister_thread+0x40/0x80 [md_mod] [<ffffffffa04cfd20>] leave+0x70/0x120 [md_cluster] [<ffffffffa0525e24>] md_cluster_stop+0x14/0x30 [md_mod] [<ffffffffa05269ab>] bitmap_free+0x14b/0x150 [md_mod] [<ffffffffa0523f3b>] do_md_stop+0x35b/0x5a0 [md_mod] [<ffffffffa0524e83>] md_ioctl+0x873/0x1590 [md_mod] [<ffffffff81288464>] blkdev_ioctl+0x214/0x7d0 [<ffffffff811dd3dd>] block_ioctl+0x3d/0x40 [<ffffffff811b92d4>] do_vfs_ioctl+0x2d4/0x4b0 [<ffffffff811b9538>] SyS_ioctl+0x88/0xa0 [<ffffffff8152a5c9>] system_call_fastpath+0x16/0x1b The problem is caused by recover_bitmaps can't reliably abort when the thread is unregistered. So dlm_lock_sync_interruptible is introduced to detect the thread's situation to fix the problem. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-08-12 13:42:42 +08:00
/*
* An variation of dlm_lock_sync, which make lock request could
* be interrupted
*/
static int dlm_lock_sync_interruptible(struct dlm_lock_resource *res, int mode,
struct mddev *mddev)
{
int ret = 0;
ret = dlm_lock(res->ls, mode, &res->lksb,
res->flags, res->name, strlen(res->name),
0, sync_ast, res, res->bast);
if (ret)
return ret;
wait_event(res->sync_locking, res->sync_locking_done
|| kthread_should_stop()
|| test_bit(MD_CLOSING, &mddev->flags));
md-cluster: introduce dlm_lock_sync_interruptible to fix tasks hang When some node leaves cluster, then it's bitmap need to be synced by another node, so "md*_recover" thread is triggered for the purpose. However, with below steps. we can find tasks hang happened either in B or C. 1. Node A create a resyncing cluster raid1, assemble it in other two nodes (B and C). 2. stop array in B and C. 3. stop array in A. linux44:~ # ps aux|grep md|grep D root 5938 0.0 0.1 19852 1964 pts/0 D+ 14:52 0:00 mdadm -S md0 root 5939 0.0 0.0 0 0 ? D 14:52 0:00 [md0_recover] linux44:~ # cat /proc/5939/stack [<ffffffffa04cf321>] dlm_lock_sync+0x71/0x90 [md_cluster] [<ffffffffa04d0705>] recover_bitmaps+0x125/0x220 [md_cluster] [<ffffffffa052105d>] md_thread+0x16d/0x180 [md_mod] [<ffffffff8107ad94>] kthread+0xb4/0xc0 [<ffffffff8152a518>] ret_from_fork+0x58/0x90 linux44:~ # cat /proc/5938/stack [<ffffffff8107afde>] kthread_stop+0x6e/0x120 [<ffffffffa0519da0>] md_unregister_thread+0x40/0x80 [md_mod] [<ffffffffa04cfd20>] leave+0x70/0x120 [md_cluster] [<ffffffffa0525e24>] md_cluster_stop+0x14/0x30 [md_mod] [<ffffffffa05269ab>] bitmap_free+0x14b/0x150 [md_mod] [<ffffffffa0523f3b>] do_md_stop+0x35b/0x5a0 [md_mod] [<ffffffffa0524e83>] md_ioctl+0x873/0x1590 [md_mod] [<ffffffff81288464>] blkdev_ioctl+0x214/0x7d0 [<ffffffff811dd3dd>] block_ioctl+0x3d/0x40 [<ffffffff811b92d4>] do_vfs_ioctl+0x2d4/0x4b0 [<ffffffff811b9538>] SyS_ioctl+0x88/0xa0 [<ffffffff8152a5c9>] system_call_fastpath+0x16/0x1b The problem is caused by recover_bitmaps can't reliably abort when the thread is unregistered. So dlm_lock_sync_interruptible is introduced to detect the thread's situation to fix the problem. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-08-12 13:42:42 +08:00
if (!res->sync_locking_done) {
/*
* the convert queue contains the lock request when request is
* interrupted, and sync_ast could still be run, so need to
* cancel the request and reset completion
*/
ret = dlm_unlock(res->ls, res->lksb.sb_lkid, DLM_LKF_CANCEL,
&res->lksb, res);
res->sync_locking_done = false;
if (unlikely(ret != 0))
pr_info("failed to cancel previous lock request "
"%s return %d\n", res->name, ret);
return -EPERM;
} else
res->sync_locking_done = false;
if (res->lksb.sb_status == 0)
res->mode = mode;
return res->lksb.sb_status;
}
static struct dlm_lock_resource *lockres_init(struct mddev *mddev,
char *name, void (*bastfn)(void *arg, int mode), int with_lvb)
{
struct dlm_lock_resource *res = NULL;
int ret, namelen;
struct md_cluster_info *cinfo = mddev->cluster_info;
res = kzalloc(sizeof(struct dlm_lock_resource), GFP_KERNEL);
if (!res)
return NULL;
init_waitqueue_head(&res->sync_locking);
res->sync_locking_done = false;
res->ls = cinfo->lockspace;
res->mddev = mddev;
res->mode = DLM_LOCK_IV;
namelen = strlen(name);
res->name = kzalloc(namelen + 1, GFP_KERNEL);
if (!res->name) {
pr_err("md-cluster: Unable to allocate resource name for resource %s\n", name);
goto out_err;
}
strlcpy(res->name, name, namelen + 1);
if (with_lvb) {
res->lksb.sb_lvbptr = kzalloc(LVB_SIZE, GFP_KERNEL);
if (!res->lksb.sb_lvbptr) {
pr_err("md-cluster: Unable to allocate LVB for resource %s\n", name);
goto out_err;
}
res->flags = DLM_LKF_VALBLK;
}
if (bastfn)
res->bast = bastfn;
res->flags |= DLM_LKF_EXPEDITE;
ret = dlm_lock_sync(res, DLM_LOCK_NL);
if (ret) {
pr_err("md-cluster: Unable to lock NL on new lock resource %s\n", name);
goto out_err;
}
res->flags &= ~DLM_LKF_EXPEDITE;
res->flags |= DLM_LKF_CONVERT;
return res;
out_err:
kfree(res->lksb.sb_lvbptr);
kfree(res->name);
kfree(res);
return NULL;
}
static void lockres_free(struct dlm_lock_resource *res)
{
int ret = 0;
if (!res)
return;
/*
* use FORCEUNLOCK flag, so we can unlock even the lock is on the
* waiting or convert queue
*/
ret = dlm_unlock(res->ls, res->lksb.sb_lkid, DLM_LKF_FORCEUNLOCK,
&res->lksb, res);
if (unlikely(ret != 0))
pr_err("failed to unlock %s return %d\n", res->name, ret);
else
wait_event(res->sync_locking, res->sync_locking_done);
kfree(res->name);
kfree(res->lksb.sb_lvbptr);
kfree(res);
}
static void add_resync_info(struct dlm_lock_resource *lockres,
sector_t lo, sector_t hi)
{
struct resync_info *ri;
ri = (struct resync_info *)lockres->lksb.sb_lvbptr;
ri->lo = cpu_to_le64(lo);
ri->hi = cpu_to_le64(hi);
}
static struct suspend_info *read_resync_info(struct mddev *mddev, struct dlm_lock_resource *lockres)
{
struct resync_info ri;
struct suspend_info *s = NULL;
sector_t hi = 0;
dlm_lock_sync(lockres, DLM_LOCK_CR);
memcpy(&ri, lockres->lksb.sb_lvbptr, sizeof(struct resync_info));
hi = le64_to_cpu(ri.hi);
if (hi > 0) {
s = kzalloc(sizeof(struct suspend_info), GFP_KERNEL);
if (!s)
goto out;
s->hi = hi;
s->lo = le64_to_cpu(ri.lo);
}
dlm_unlock_sync(lockres);
out:
return s;
}
static void recover_bitmaps(struct md_thread *thread)
{
struct mddev *mddev = thread->mddev;
struct md_cluster_info *cinfo = mddev->cluster_info;
struct dlm_lock_resource *bm_lockres;
char str[64];
int slot, ret;
struct suspend_info *s, *tmp;
sector_t lo, hi;
while (cinfo->recovery_map) {
slot = fls64((u64)cinfo->recovery_map) - 1;
/* Clear suspend_area associated with the bitmap */
spin_lock_irq(&cinfo->suspend_lock);
list_for_each_entry_safe(s, tmp, &cinfo->suspend_list, list)
if (slot == s->slot) {
list_del(&s->list);
kfree(s);
}
spin_unlock_irq(&cinfo->suspend_lock);
snprintf(str, 64, "bitmap%04d", slot);
bm_lockres = lockres_init(mddev, str, NULL, 1);
if (!bm_lockres) {
pr_err("md-cluster: Cannot initialize bitmaps\n");
goto clear_bit;
}
md-cluster: introduce dlm_lock_sync_interruptible to fix tasks hang When some node leaves cluster, then it's bitmap need to be synced by another node, so "md*_recover" thread is triggered for the purpose. However, with below steps. we can find tasks hang happened either in B or C. 1. Node A create a resyncing cluster raid1, assemble it in other two nodes (B and C). 2. stop array in B and C. 3. stop array in A. linux44:~ # ps aux|grep md|grep D root 5938 0.0 0.1 19852 1964 pts/0 D+ 14:52 0:00 mdadm -S md0 root 5939 0.0 0.0 0 0 ? D 14:52 0:00 [md0_recover] linux44:~ # cat /proc/5939/stack [<ffffffffa04cf321>] dlm_lock_sync+0x71/0x90 [md_cluster] [<ffffffffa04d0705>] recover_bitmaps+0x125/0x220 [md_cluster] [<ffffffffa052105d>] md_thread+0x16d/0x180 [md_mod] [<ffffffff8107ad94>] kthread+0xb4/0xc0 [<ffffffff8152a518>] ret_from_fork+0x58/0x90 linux44:~ # cat /proc/5938/stack [<ffffffff8107afde>] kthread_stop+0x6e/0x120 [<ffffffffa0519da0>] md_unregister_thread+0x40/0x80 [md_mod] [<ffffffffa04cfd20>] leave+0x70/0x120 [md_cluster] [<ffffffffa0525e24>] md_cluster_stop+0x14/0x30 [md_mod] [<ffffffffa05269ab>] bitmap_free+0x14b/0x150 [md_mod] [<ffffffffa0523f3b>] do_md_stop+0x35b/0x5a0 [md_mod] [<ffffffffa0524e83>] md_ioctl+0x873/0x1590 [md_mod] [<ffffffff81288464>] blkdev_ioctl+0x214/0x7d0 [<ffffffff811dd3dd>] block_ioctl+0x3d/0x40 [<ffffffff811b92d4>] do_vfs_ioctl+0x2d4/0x4b0 [<ffffffff811b9538>] SyS_ioctl+0x88/0xa0 [<ffffffff8152a5c9>] system_call_fastpath+0x16/0x1b The problem is caused by recover_bitmaps can't reliably abort when the thread is unregistered. So dlm_lock_sync_interruptible is introduced to detect the thread's situation to fix the problem. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-08-12 13:42:42 +08:00
ret = dlm_lock_sync_interruptible(bm_lockres, DLM_LOCK_PW, mddev);
if (ret) {
pr_err("md-cluster: Could not DLM lock %s: %d\n",
str, ret);
goto clear_bit;
}
ret = bitmap_copy_from_slot(mddev, slot, &lo, &hi, true);
if (ret) {
pr_err("md-cluster: Could not copy data from bitmap %d\n", slot);
goto clear_bit;
}
if (hi > 0) {
if (lo < mddev->recovery_cp)
mddev->recovery_cp = lo;
/* wake up thread to continue resync in case resync
* is not finished */
if (mddev->recovery_cp != MaxSector) {
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
}
}
clear_bit:
lockres_free(bm_lockres);
clear_bit(slot, &cinfo->recovery_map);
}
}
static void recover_prep(void *arg)
{
struct mddev *mddev = arg;
struct md_cluster_info *cinfo = mddev->cluster_info;
set_bit(MD_CLUSTER_SUSPEND_READ_BALANCING, &cinfo->state);
}
static void __recover_slot(struct mddev *mddev, int slot)
{
struct md_cluster_info *cinfo = mddev->cluster_info;
set_bit(slot, &cinfo->recovery_map);
if (!cinfo->recovery_thread) {
cinfo->recovery_thread = md_register_thread(recover_bitmaps,
mddev, "recover");
if (!cinfo->recovery_thread) {
pr_warn("md-cluster: Could not create recovery thread\n");
return;
}
}
md_wakeup_thread(cinfo->recovery_thread);
}
static void recover_slot(void *arg, struct dlm_slot *slot)
{
struct mddev *mddev = arg;
struct md_cluster_info *cinfo = mddev->cluster_info;
pr_info("md-cluster: %s Node %d/%d down. My slot: %d. Initiating recovery.\n",
mddev->bitmap_info.cluster_name,
slot->nodeid, slot->slot,
cinfo->slot_number);
/* deduct one since dlm slot starts from one while the num of
* cluster-md begins with 0 */
__recover_slot(mddev, slot->slot - 1);
}
static void recover_done(void *arg, struct dlm_slot *slots,
int num_slots, int our_slot,
uint32_t generation)
{
struct mddev *mddev = arg;
struct md_cluster_info *cinfo = mddev->cluster_info;
cinfo->slot_number = our_slot;
/* completion is only need to be complete when node join cluster,
* it doesn't need to run during another node's failure */
if (test_bit(MD_CLUSTER_BEGIN_JOIN_CLUSTER, &cinfo->state)) {
complete(&cinfo->completion);
clear_bit(MD_CLUSTER_BEGIN_JOIN_CLUSTER, &cinfo->state);
}
clear_bit(MD_CLUSTER_SUSPEND_READ_BALANCING, &cinfo->state);
}
/* the ops is called when node join the cluster, and do lock recovery
* if node failure occurs */
static const struct dlm_lockspace_ops md_ls_ops = {
.recover_prep = recover_prep,
.recover_slot = recover_slot,
.recover_done = recover_done,
};
/*
* The BAST function for the ack lock resource
* This function wakes up the receive thread in
* order to receive and process the message.
*/
static void ack_bast(void *arg, int mode)
{
struct dlm_lock_resource *res = arg;
struct md_cluster_info *cinfo = res->mddev->cluster_info;
if (mode == DLM_LOCK_EX) {
if (test_bit(MD_CLUSTER_ALREADY_IN_CLUSTER, &cinfo->state))
md_wakeup_thread(cinfo->recv_thread);
else
set_bit(MD_CLUSTER_PENDING_RECV_EVENT, &cinfo->state);
}
}
static void __remove_suspend_info(struct md_cluster_info *cinfo, int slot)
{
struct suspend_info *s, *tmp;
list_for_each_entry_safe(s, tmp, &cinfo->suspend_list, list)
if (slot == s->slot) {
list_del(&s->list);
kfree(s);
break;
}
}
static void remove_suspend_info(struct mddev *mddev, int slot)
{
struct md_cluster_info *cinfo = mddev->cluster_info;
spin_lock_irq(&cinfo->suspend_lock);
__remove_suspend_info(cinfo, slot);
spin_unlock_irq(&cinfo->suspend_lock);
mddev->pers->quiesce(mddev, 2);
}
static void process_suspend_info(struct mddev *mddev,
int slot, sector_t lo, sector_t hi)
{
struct md_cluster_info *cinfo = mddev->cluster_info;
struct suspend_info *s;
if (!hi) {
remove_suspend_info(mddev, slot);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
return;
}
/*
* The bitmaps are not same for different nodes
* if RESYNCING is happening in one node, then
* the node which received the RESYNCING message
* probably will perform resync with the region
* [lo, hi] again, so we could reduce resync time
* a lot if we can ensure that the bitmaps among
* different nodes are match up well.
*
* sync_low/hi is used to record the region which
* arrived in the previous RESYNCING message,
*
* Call bitmap_sync_with_cluster to clear
* NEEDED_MASK and set RESYNC_MASK since
* resync thread is running in another node,
* so we don't need to do the resync again
* with the same section */
bitmap_sync_with_cluster(mddev, cinfo->sync_low,
cinfo->sync_hi,
lo, hi);
cinfo->sync_low = lo;
cinfo->sync_hi = hi;
s = kzalloc(sizeof(struct suspend_info), GFP_KERNEL);
if (!s)
return;
s->slot = slot;
s->lo = lo;
s->hi = hi;
mddev->pers->quiesce(mddev, 1);
mddev->pers->quiesce(mddev, 0);
spin_lock_irq(&cinfo->suspend_lock);
/* Remove existing entry (if exists) before adding */
__remove_suspend_info(cinfo, slot);
list_add(&s->list, &cinfo->suspend_list);
spin_unlock_irq(&cinfo->suspend_lock);
mddev->pers->quiesce(mddev, 2);
}
static void process_add_new_disk(struct mddev *mddev, struct cluster_msg *cmsg)
{
char disk_uuid[64];
struct md_cluster_info *cinfo = mddev->cluster_info;
char event_name[] = "EVENT=ADD_DEVICE";
char raid_slot[16];
char *envp[] = {event_name, disk_uuid, raid_slot, NULL};
int len;
len = snprintf(disk_uuid, 64, "DEVICE_UUID=");
sprintf(disk_uuid + len, "%pU", cmsg->uuid);
snprintf(raid_slot, 16, "RAID_DISK=%d", le32_to_cpu(cmsg->raid_slot));
pr_info("%s:%d Sending kobject change with %s and %s\n", __func__, __LINE__, disk_uuid, raid_slot);
init_completion(&cinfo->newdisk_completion);
set_bit(MD_CLUSTER_WAITING_FOR_NEWDISK, &cinfo->state);
kobject_uevent_env(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE, envp);
wait_for_completion_timeout(&cinfo->newdisk_completion,
NEW_DEV_TIMEOUT);
clear_bit(MD_CLUSTER_WAITING_FOR_NEWDISK, &cinfo->state);
}
static void process_metadata_update(struct mddev *mddev, struct cluster_msg *msg)
{
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
int got_lock = 0;
struct md_cluster_info *cinfo = mddev->cluster_info;
mddev->good_device_nr = le32_to_cpu(msg->raid_slot);
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
dlm_lock_sync(cinfo->no_new_dev_lockres, DLM_LOCK_CR);
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
wait_event(mddev->thread->wqueue,
(got_lock = mddev_trylock(mddev)) ||
test_bit(MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD, &cinfo->state));
md_reload_sb(mddev, mddev->good_device_nr);
if (got_lock)
mddev_unlock(mddev);
}
static void process_remove_disk(struct mddev *mddev, struct cluster_msg *msg)
{
struct md_rdev *rdev;
rcu_read_lock();
rdev = md_find_rdev_nr_rcu(mddev, le32_to_cpu(msg->raid_slot));
if (rdev) {
set_bit(ClusterRemove, &rdev->flags);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
}
else
pr_warn("%s: %d Could not find disk(%d) to REMOVE\n",
__func__, __LINE__, le32_to_cpu(msg->raid_slot));
rcu_read_unlock();
}
static void process_readd_disk(struct mddev *mddev, struct cluster_msg *msg)
{
struct md_rdev *rdev;
rcu_read_lock();
rdev = md_find_rdev_nr_rcu(mddev, le32_to_cpu(msg->raid_slot));
if (rdev && test_bit(Faulty, &rdev->flags))
clear_bit(Faulty, &rdev->flags);
else
pr_warn("%s: %d Could not find disk(%d) which is faulty",
__func__, __LINE__, le32_to_cpu(msg->raid_slot));
rcu_read_unlock();
}
static int process_recvd_msg(struct mddev *mddev, struct cluster_msg *msg)
{
int ret = 0;
if (WARN(mddev->cluster_info->slot_number - 1 == le32_to_cpu(msg->slot),
"node %d received it's own msg\n", le32_to_cpu(msg->slot)))
return -1;
switch (le32_to_cpu(msg->type)) {
case METADATA_UPDATED:
process_metadata_update(mddev, msg);
break;
case CHANGE_CAPACITY:
set_capacity(mddev->gendisk, mddev->array_sectors);
revalidate_disk(mddev->gendisk);
break;
case RESYNCING:
process_suspend_info(mddev, le32_to_cpu(msg->slot),
le64_to_cpu(msg->low),
le64_to_cpu(msg->high));
break;
case NEWDISK:
process_add_new_disk(mddev, msg);
break;
case REMOVE:
process_remove_disk(mddev, msg);
break;
case RE_ADD:
process_readd_disk(mddev, msg);
break;
case BITMAP_NEEDS_SYNC:
__recover_slot(mddev, le32_to_cpu(msg->slot));
break;
default:
ret = -1;
pr_warn("%s:%d Received unknown message from %d\n",
__func__, __LINE__, msg->slot);
}
return ret;
}
/*
* thread for receiving message
*/
static void recv_daemon(struct md_thread *thread)
{
struct md_cluster_info *cinfo = thread->mddev->cluster_info;
struct dlm_lock_resource *ack_lockres = cinfo->ack_lockres;
struct dlm_lock_resource *message_lockres = cinfo->message_lockres;
struct cluster_msg msg;
int ret;
mutex_lock(&cinfo->recv_mutex);
/*get CR on Message*/
if (dlm_lock_sync(message_lockres, DLM_LOCK_CR)) {
pr_err("md/raid1:failed to get CR on MESSAGE\n");
mutex_unlock(&cinfo->recv_mutex);
return;
}
/* read lvb and wake up thread to process this message_lockres */
memcpy(&msg, message_lockres->lksb.sb_lvbptr, sizeof(struct cluster_msg));
ret = process_recvd_msg(thread->mddev, &msg);
if (ret)
goto out;
/*release CR on ack_lockres*/
ret = dlm_unlock_sync(ack_lockres);
if (unlikely(ret != 0))
pr_info("unlock ack failed return %d\n", ret);
/*up-convert to PR on message_lockres*/
ret = dlm_lock_sync(message_lockres, DLM_LOCK_PR);
if (unlikely(ret != 0))
pr_info("lock PR on msg failed return %d\n", ret);
/*get CR on ack_lockres again*/
ret = dlm_lock_sync(ack_lockres, DLM_LOCK_CR);
if (unlikely(ret != 0))
pr_info("lock CR on ack failed return %d\n", ret);
out:
/*release CR on message_lockres*/
ret = dlm_unlock_sync(message_lockres);
if (unlikely(ret != 0))
pr_info("unlock msg failed return %d\n", ret);
mutex_unlock(&cinfo->recv_mutex);
}
/* lock_token()
* Takes the lock on the TOKEN lock resource so no other
* node can communicate while the operation is underway.
*/
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
static int lock_token(struct md_cluster_info *cinfo, bool mddev_locked)
{
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
int error, set_bit = 0;
struct mddev *mddev = cinfo->mddev;
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
/*
* If resync thread run after raid1d thread, then process_metadata_update
* could not continue if raid1d held reconfig_mutex (and raid1d is blocked
* since another node already got EX on Token and waitting the EX of Ack),
* so let resync wake up thread in case flag is set.
*/
if (mddev_locked && !test_bit(MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD,
&cinfo->state)) {
error = test_and_set_bit_lock(MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD,
&cinfo->state);
WARN_ON_ONCE(error);
md_wakeup_thread(mddev->thread);
set_bit = 1;
}
error = dlm_lock_sync(cinfo->token_lockres, DLM_LOCK_EX);
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
if (set_bit)
clear_bit_unlock(MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD, &cinfo->state);
if (error)
pr_err("md-cluster(%s:%d): failed to get EX on TOKEN (%d)\n",
__func__, __LINE__, error);
/* Lock the receive sequence */
mutex_lock(&cinfo->recv_mutex);
return error;
}
/* lock_comm()
* Sets the MD_CLUSTER_SEND_LOCK bit to lock the send channel.
*/
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
static int lock_comm(struct md_cluster_info *cinfo, bool mddev_locked)
{
wait_event(cinfo->wait,
!test_and_set_bit(MD_CLUSTER_SEND_LOCK, &cinfo->state));
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
return lock_token(cinfo, mddev_locked);
}
static void unlock_comm(struct md_cluster_info *cinfo)
{
WARN_ON(cinfo->token_lockres->mode != DLM_LOCK_EX);
mutex_unlock(&cinfo->recv_mutex);
dlm_unlock_sync(cinfo->token_lockres);
clear_bit(MD_CLUSTER_SEND_LOCK, &cinfo->state);
wake_up(&cinfo->wait);
}
/* __sendmsg()
* This function performs the actual sending of the message. This function is
* usually called after performing the encompassing operation
* The function:
* 1. Grabs the message lockresource in EX mode
* 2. Copies the message to the message LVB
* 3. Downconverts message lockresource to CW
* 4. Upconverts ack lock resource from CR to EX. This forces the BAST on other nodes
* and the other nodes read the message. The thread will wait here until all other
* nodes have released ack lock resource.
* 5. Downconvert ack lockresource to CR
*/
static int __sendmsg(struct md_cluster_info *cinfo, struct cluster_msg *cmsg)
{
int error;
int slot = cinfo->slot_number - 1;
cmsg->slot = cpu_to_le32(slot);
/*get EX on Message*/
error = dlm_lock_sync(cinfo->message_lockres, DLM_LOCK_EX);
if (error) {
pr_err("md-cluster: failed to get EX on MESSAGE (%d)\n", error);
goto failed_message;
}
memcpy(cinfo->message_lockres->lksb.sb_lvbptr, (void *)cmsg,
sizeof(struct cluster_msg));
/*down-convert EX to CW on Message*/
error = dlm_lock_sync(cinfo->message_lockres, DLM_LOCK_CW);
if (error) {
pr_err("md-cluster: failed to convert EX to CW on MESSAGE(%d)\n",
error);
goto failed_ack;
}
/*up-convert CR to EX on Ack*/
error = dlm_lock_sync(cinfo->ack_lockres, DLM_LOCK_EX);
if (error) {
pr_err("md-cluster: failed to convert CR to EX on ACK(%d)\n",
error);
goto failed_ack;
}
/*down-convert EX to CR on Ack*/
error = dlm_lock_sync(cinfo->ack_lockres, DLM_LOCK_CR);
if (error) {
pr_err("md-cluster: failed to convert EX to CR on ACK(%d)\n",
error);
goto failed_ack;
}
failed_ack:
error = dlm_unlock_sync(cinfo->message_lockres);
if (unlikely(error != 0)) {
pr_err("md-cluster: failed convert to NL on MESSAGE(%d)\n",
error);
/* in case the message can't be released due to some reason */
goto failed_ack;
}
failed_message:
return error;
}
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
static int sendmsg(struct md_cluster_info *cinfo, struct cluster_msg *cmsg,
bool mddev_locked)
{
int ret;
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
lock_comm(cinfo, mddev_locked);
ret = __sendmsg(cinfo, cmsg);
unlock_comm(cinfo);
return ret;
}
static int gather_all_resync_info(struct mddev *mddev, int total_slots)
{
struct md_cluster_info *cinfo = mddev->cluster_info;
int i, ret = 0;
struct dlm_lock_resource *bm_lockres;
struct suspend_info *s;
char str[64];
sector_t lo, hi;
for (i = 0; i < total_slots; i++) {
memset(str, '\0', 64);
snprintf(str, 64, "bitmap%04d", i);
bm_lockres = lockres_init(mddev, str, NULL, 1);
if (!bm_lockres)
return -ENOMEM;
if (i == (cinfo->slot_number - 1)) {
lockres_free(bm_lockres);
continue;
}
bm_lockres->flags |= DLM_LKF_NOQUEUE;
ret = dlm_lock_sync(bm_lockres, DLM_LOCK_PW);
if (ret == -EAGAIN) {
s = read_resync_info(mddev, bm_lockres);
if (s) {
pr_info("%s:%d Resync[%llu..%llu] in progress on %d\n",
__func__, __LINE__,
(unsigned long long) s->lo,
(unsigned long long) s->hi, i);
spin_lock_irq(&cinfo->suspend_lock);
s->slot = i;
list_add(&s->list, &cinfo->suspend_list);
spin_unlock_irq(&cinfo->suspend_lock);
}
ret = 0;
lockres_free(bm_lockres);
continue;
}
if (ret) {
lockres_free(bm_lockres);
goto out;
}
/* Read the disk bitmap sb and check if it needs recovery */
ret = bitmap_copy_from_slot(mddev, i, &lo, &hi, false);
if (ret) {
pr_warn("md-cluster: Could not gather bitmaps from slot %d", i);
lockres_free(bm_lockres);
continue;
}
if ((hi > 0) && (lo < mddev->recovery_cp)) {
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
mddev->recovery_cp = lo;
md_check_recovery(mddev);
}
lockres_free(bm_lockres);
}
out:
return ret;
}
static int join(struct mddev *mddev, int nodes)
{
struct md_cluster_info *cinfo;
int ret, ops_rv;
char str[64];
cinfo = kzalloc(sizeof(struct md_cluster_info), GFP_KERNEL);
if (!cinfo)
return -ENOMEM;
INIT_LIST_HEAD(&cinfo->suspend_list);
spin_lock_init(&cinfo->suspend_lock);
init_completion(&cinfo->completion);
set_bit(MD_CLUSTER_BEGIN_JOIN_CLUSTER, &cinfo->state);
init_waitqueue_head(&cinfo->wait);
mutex_init(&cinfo->recv_mutex);
mddev->cluster_info = cinfo;
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
cinfo->mddev = mddev;
memset(str, 0, 64);
sprintf(str, "%pU", mddev->uuid);
ret = dlm_new_lockspace(str, mddev->bitmap_info.cluster_name,
DLM_LSFL_FS, LVB_SIZE,
&md_ls_ops, mddev, &ops_rv, &cinfo->lockspace);
if (ret)
goto err;
wait_for_completion(&cinfo->completion);
if (nodes < cinfo->slot_number) {
pr_err("md-cluster: Slot allotted(%d) is greater than available slots(%d).",
cinfo->slot_number, nodes);
ret = -ERANGE;
goto err;
}
/* Initiate the communication resources */
ret = -ENOMEM;
cinfo->recv_thread = md_register_thread(recv_daemon, mddev, "cluster_recv");
if (!cinfo->recv_thread) {
pr_err("md-cluster: cannot allocate memory for recv_thread!\n");
goto err;
}
cinfo->message_lockres = lockres_init(mddev, "message", NULL, 1);
if (!cinfo->message_lockres)
goto err;
cinfo->token_lockres = lockres_init(mddev, "token", NULL, 0);
if (!cinfo->token_lockres)
goto err;
cinfo->no_new_dev_lockres = lockres_init(mddev, "no-new-dev", NULL, 0);
if (!cinfo->no_new_dev_lockres)
goto err;
ret = dlm_lock_sync(cinfo->token_lockres, DLM_LOCK_EX);
if (ret) {
ret = -EAGAIN;
pr_err("md-cluster: can't join cluster to avoid lock issue\n");
goto err;
}
cinfo->ack_lockres = lockres_init(mddev, "ack", ack_bast, 0);
if (!cinfo->ack_lockres) {
ret = -ENOMEM;
goto err;
}
/* get sync CR lock on ACK. */
if (dlm_lock_sync(cinfo->ack_lockres, DLM_LOCK_CR))
pr_err("md-cluster: failed to get a sync CR lock on ACK!(%d)\n",
ret);
dlm_unlock_sync(cinfo->token_lockres);
/* get sync CR lock on no-new-dev. */
if (dlm_lock_sync(cinfo->no_new_dev_lockres, DLM_LOCK_CR))
pr_err("md-cluster: failed to get a sync CR lock on no-new-dev!(%d)\n", ret);
pr_info("md-cluster: Joined cluster %s slot %d\n", str, cinfo->slot_number);
snprintf(str, 64, "bitmap%04d", cinfo->slot_number - 1);
cinfo->bitmap_lockres = lockres_init(mddev, str, NULL, 1);
if (!cinfo->bitmap_lockres) {
ret = -ENOMEM;
goto err;
}
if (dlm_lock_sync(cinfo->bitmap_lockres, DLM_LOCK_PW)) {
pr_err("Failed to get bitmap lock\n");
ret = -EINVAL;
goto err;
}
cinfo->resync_lockres = lockres_init(mddev, "resync", NULL, 0);
if (!cinfo->resync_lockres) {
ret = -ENOMEM;
goto err;
}
return 0;
err:
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
set_bit(MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD, &cinfo->state);
md_unregister_thread(&cinfo->recovery_thread);
md_unregister_thread(&cinfo->recv_thread);
lockres_free(cinfo->message_lockres);
lockres_free(cinfo->token_lockres);
lockres_free(cinfo->ack_lockres);
lockres_free(cinfo->no_new_dev_lockres);
lockres_free(cinfo->resync_lockres);
lockres_free(cinfo->bitmap_lockres);
if (cinfo->lockspace)
dlm_release_lockspace(cinfo->lockspace, 2);
mddev->cluster_info = NULL;
kfree(cinfo);
return ret;
}
static void load_bitmaps(struct mddev *mddev, int total_slots)
{
struct md_cluster_info *cinfo = mddev->cluster_info;
/* load all the node's bitmap info for resync */
if (gather_all_resync_info(mddev, total_slots))
pr_err("md-cluster: failed to gather all resyn infos\n");
set_bit(MD_CLUSTER_ALREADY_IN_CLUSTER, &cinfo->state);
/* wake up recv thread in case something need to be handled */
if (test_and_clear_bit(MD_CLUSTER_PENDING_RECV_EVENT, &cinfo->state))
md_wakeup_thread(cinfo->recv_thread);
}
static void resync_bitmap(struct mddev *mddev)
{
struct md_cluster_info *cinfo = mddev->cluster_info;
struct cluster_msg cmsg = {0};
int err;
cmsg.type = cpu_to_le32(BITMAP_NEEDS_SYNC);
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
err = sendmsg(cinfo, &cmsg, 1);
if (err)
pr_err("%s:%d: failed to send BITMAP_NEEDS_SYNC message (%d)\n",
__func__, __LINE__, err);
}
static void unlock_all_bitmaps(struct mddev *mddev);
static int leave(struct mddev *mddev)
{
struct md_cluster_info *cinfo = mddev->cluster_info;
if (!cinfo)
return 0;
/* BITMAP_NEEDS_SYNC message should be sent when node
* is leaving the cluster with dirty bitmap, also we
* can only deliver it when dlm connection is available */
if (cinfo->slot_number > 0 && mddev->recovery_cp != MaxSector)
resync_bitmap(mddev);
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
set_bit(MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD, &cinfo->state);
md_unregister_thread(&cinfo->recovery_thread);
md_unregister_thread(&cinfo->recv_thread);
lockres_free(cinfo->message_lockres);
lockres_free(cinfo->token_lockres);
lockres_free(cinfo->ack_lockres);
lockres_free(cinfo->no_new_dev_lockres);
lockres_free(cinfo->resync_lockres);
lockres_free(cinfo->bitmap_lockres);
unlock_all_bitmaps(mddev);
dlm_release_lockspace(cinfo->lockspace, 2);
kfree(cinfo);
return 0;
}
/* slot_number(): Returns the MD slot number to use
* DLM starts the slot numbers from 1, wheras cluster-md
* wants the number to be from zero, so we deduct one
*/
static int slot_number(struct mddev *mddev)
{
struct md_cluster_info *cinfo = mddev->cluster_info;
return cinfo->slot_number - 1;
}
/*
* Check if the communication is already locked, else lock the communication
* channel.
* If it is already locked, token is in EX mode, and hence lock_token()
* should not be called.
*/
static int metadata_update_start(struct mddev *mddev)
{
struct md_cluster_info *cinfo = mddev->cluster_info;
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
int ret;
/*
* metadata_update_start is always called with the protection of
* reconfig_mutex, so set WAITING_FOR_TOKEN here.
*/
ret = test_and_set_bit_lock(MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD,
&cinfo->state);
WARN_ON_ONCE(ret);
md_wakeup_thread(mddev->thread);
wait_event(cinfo->wait,
!test_and_set_bit(MD_CLUSTER_SEND_LOCK, &cinfo->state) ||
test_and_clear_bit(MD_CLUSTER_SEND_LOCKED_ALREADY, &cinfo->state));
/* If token is already locked, return 0 */
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
if (cinfo->token_lockres->mode == DLM_LOCK_EX) {
clear_bit_unlock(MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD, &cinfo->state);
return 0;
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
}
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
ret = lock_token(cinfo, 1);
clear_bit_unlock(MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD, &cinfo->state);
return ret;
}
static int metadata_update_finish(struct mddev *mddev)
{
struct md_cluster_info *cinfo = mddev->cluster_info;
struct cluster_msg cmsg;
struct md_rdev *rdev;
int ret = 0;
int raid_slot = -1;
memset(&cmsg, 0, sizeof(cmsg));
cmsg.type = cpu_to_le32(METADATA_UPDATED);
/* Pick up a good active device number to send.
*/
rdev_for_each(rdev, mddev)
if (rdev->raid_disk > -1 && !test_bit(Faulty, &rdev->flags)) {
raid_slot = rdev->desc_nr;
break;
}
if (raid_slot >= 0) {
cmsg.raid_slot = cpu_to_le32(raid_slot);
ret = __sendmsg(cinfo, &cmsg);
} else
pr_warn("md-cluster: No good device id found to send\n");
clear_bit(MD_CLUSTER_SEND_LOCKED_ALREADY, &cinfo->state);
unlock_comm(cinfo);
return ret;
}
static void metadata_update_cancel(struct mddev *mddev)
{
struct md_cluster_info *cinfo = mddev->cluster_info;
clear_bit(MD_CLUSTER_SEND_LOCKED_ALREADY, &cinfo->state);
unlock_comm(cinfo);
}
/*
* return 0 if all the bitmaps have the same sync_size
*/
int cluster_check_sync_size(struct mddev *mddev)
{
int i, rv;
bitmap_super_t *sb;
unsigned long my_sync_size, sync_size = 0;
int node_num = mddev->bitmap_info.nodes;
int current_slot = md_cluster_ops->slot_number(mddev);
struct bitmap *bitmap = mddev->bitmap;
char str[64];
struct dlm_lock_resource *bm_lockres;
sb = kmap_atomic(bitmap->storage.sb_page);
my_sync_size = sb->sync_size;
kunmap_atomic(sb);
for (i = 0; i < node_num; i++) {
if (i == current_slot)
continue;
bitmap = get_bitmap_from_slot(mddev, i);
if (IS_ERR(bitmap)) {
pr_err("can't get bitmap from slot %d\n", i);
return -1;
}
/*
* If we can hold the bitmap lock of one node then
* the slot is not occupied, update the sb.
*/
snprintf(str, 64, "bitmap%04d", i);
bm_lockres = lockres_init(mddev, str, NULL, 1);
if (!bm_lockres) {
pr_err("md-cluster: Cannot initialize %s\n", str);
lockres_free(bm_lockres);
return -1;
}
bm_lockres->flags |= DLM_LKF_NOQUEUE;
rv = dlm_lock_sync(bm_lockres, DLM_LOCK_PW);
if (!rv)
bitmap_update_sb(bitmap);
lockres_free(bm_lockres);
sb = kmap_atomic(bitmap->storage.sb_page);
if (sync_size == 0)
sync_size = sb->sync_size;
else if (sync_size != sb->sync_size) {
kunmap_atomic(sb);
bitmap_free(bitmap);
return -1;
}
kunmap_atomic(sb);
bitmap_free(bitmap);
}
return (my_sync_size == sync_size) ? 0 : -1;
}
static int resync_start(struct mddev *mddev)
{
struct md_cluster_info *cinfo = mddev->cluster_info;
return dlm_lock_sync_interruptible(cinfo->resync_lockres, DLM_LOCK_EX, mddev);
}
static int resync_info_update(struct mddev *mddev, sector_t lo, sector_t hi)
{
struct md_cluster_info *cinfo = mddev->cluster_info;
struct resync_info ri;
struct cluster_msg cmsg = {0};
/* do not send zero again, if we have sent before */
if (hi == 0) {
memcpy(&ri, cinfo->bitmap_lockres->lksb.sb_lvbptr, sizeof(struct resync_info));
if (le64_to_cpu(ri.hi) == 0)
return 0;
}
add_resync_info(cinfo->bitmap_lockres, lo, hi);
/* Re-acquire the lock to refresh LVB */
dlm_lock_sync(cinfo->bitmap_lockres, DLM_LOCK_PW);
cmsg.type = cpu_to_le32(RESYNCING);
cmsg.low = cpu_to_le64(lo);
cmsg.high = cpu_to_le64(hi);
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
/*
* mddev_lock is held if resync_info_update is called from
* resync_finish (md_reap_sync_thread -> resync_finish)
*/
if (lo == 0 && hi == 0)
return sendmsg(cinfo, &cmsg, 1);
else
return sendmsg(cinfo, &cmsg, 0);
}
static int resync_finish(struct mddev *mddev)
{
struct md_cluster_info *cinfo = mddev->cluster_info;
dlm_unlock_sync(cinfo->resync_lockres);
return resync_info_update(mddev, 0, 0);
}
static int area_resyncing(struct mddev *mddev, int direction,
sector_t lo, sector_t hi)
{
struct md_cluster_info *cinfo = mddev->cluster_info;
int ret = 0;
struct suspend_info *s;
if ((direction == READ) &&
test_bit(MD_CLUSTER_SUSPEND_READ_BALANCING, &cinfo->state))
return 1;
spin_lock_irq(&cinfo->suspend_lock);
if (list_empty(&cinfo->suspend_list))
goto out;
list_for_each_entry(s, &cinfo->suspend_list, list)
if (hi > s->lo && lo < s->hi) {
ret = 1;
break;
}
out:
spin_unlock_irq(&cinfo->suspend_lock);
return ret;
}
/* add_new_disk() - initiates a disk add
* However, if this fails before writing md_update_sb(),
* add_new_disk_cancel() must be called to release token lock
*/
static int add_new_disk(struct mddev *mddev, struct md_rdev *rdev)
{
struct md_cluster_info *cinfo = mddev->cluster_info;
struct cluster_msg cmsg;
int ret = 0;
struct mdp_superblock_1 *sb = page_address(rdev->sb_page);
char *uuid = sb->device_uuid;
memset(&cmsg, 0, sizeof(cmsg));
cmsg.type = cpu_to_le32(NEWDISK);
memcpy(cmsg.uuid, uuid, 16);
cmsg.raid_slot = cpu_to_le32(rdev->desc_nr);
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
lock_comm(cinfo, 1);
ret = __sendmsg(cinfo, &cmsg);
if (ret)
return ret;
cinfo->no_new_dev_lockres->flags |= DLM_LKF_NOQUEUE;
ret = dlm_lock_sync(cinfo->no_new_dev_lockres, DLM_LOCK_EX);
cinfo->no_new_dev_lockres->flags &= ~DLM_LKF_NOQUEUE;
/* Some node does not "see" the device */
if (ret == -EAGAIN)
ret = -ENOENT;
if (ret)
unlock_comm(cinfo);
else {
dlm_lock_sync(cinfo->no_new_dev_lockres, DLM_LOCK_CR);
/* Since MD_CHANGE_DEVS will be set in add_bound_rdev which
* will run soon after add_new_disk, the below path will be
* invoked:
* md_wakeup_thread(mddev->thread)
* -> conf->thread (raid1d)
* -> md_check_recovery -> md_update_sb
* -> metadata_update_start/finish
* MD_CLUSTER_SEND_LOCKED_ALREADY will be cleared eventually.
*
* For other failure cases, metadata_update_cancel and
* add_new_disk_cancel also clear below bit as well.
* */
set_bit(MD_CLUSTER_SEND_LOCKED_ALREADY, &cinfo->state);
wake_up(&cinfo->wait);
}
return ret;
}
static void add_new_disk_cancel(struct mddev *mddev)
{
struct md_cluster_info *cinfo = mddev->cluster_info;
clear_bit(MD_CLUSTER_SEND_LOCKED_ALREADY, &cinfo->state);
unlock_comm(cinfo);
}
static int new_disk_ack(struct mddev *mddev, bool ack)
{
struct md_cluster_info *cinfo = mddev->cluster_info;
if (!test_bit(MD_CLUSTER_WAITING_FOR_NEWDISK, &cinfo->state)) {
pr_warn("md-cluster(%s): Spurious cluster confirmation\n", mdname(mddev));
return -EINVAL;
}
if (ack)
dlm_unlock_sync(cinfo->no_new_dev_lockres);
complete(&cinfo->newdisk_completion);
return 0;
}
static int remove_disk(struct mddev *mddev, struct md_rdev *rdev)
{
struct cluster_msg cmsg = {0};
struct md_cluster_info *cinfo = mddev->cluster_info;
cmsg.type = cpu_to_le32(REMOVE);
cmsg.raid_slot = cpu_to_le32(rdev->desc_nr);
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
return sendmsg(cinfo, &cmsg, 1);
}
static int lock_all_bitmaps(struct mddev *mddev)
{
int slot, my_slot, ret, held = 1, i = 0;
char str[64];
struct md_cluster_info *cinfo = mddev->cluster_info;
cinfo->other_bitmap_lockres = kzalloc((mddev->bitmap_info.nodes - 1) *
sizeof(struct dlm_lock_resource *),
GFP_KERNEL);
if (!cinfo->other_bitmap_lockres) {
pr_err("md: can't alloc mem for other bitmap locks\n");
return 0;
}
my_slot = slot_number(mddev);
for (slot = 0; slot < mddev->bitmap_info.nodes; slot++) {
if (slot == my_slot)
continue;
memset(str, '\0', 64);
snprintf(str, 64, "bitmap%04d", slot);
cinfo->other_bitmap_lockres[i] = lockres_init(mddev, str, NULL, 1);
if (!cinfo->other_bitmap_lockres[i])
return -ENOMEM;
cinfo->other_bitmap_lockres[i]->flags |= DLM_LKF_NOQUEUE;
ret = dlm_lock_sync(cinfo->other_bitmap_lockres[i], DLM_LOCK_PW);
if (ret)
held = -1;
i++;
}
return held;
}
static void unlock_all_bitmaps(struct mddev *mddev)
{
struct md_cluster_info *cinfo = mddev->cluster_info;
int i;
/* release other node's bitmap lock if they are existed */
if (cinfo->other_bitmap_lockres) {
for (i = 0; i < mddev->bitmap_info.nodes - 1; i++) {
if (cinfo->other_bitmap_lockres[i]) {
lockres_free(cinfo->other_bitmap_lockres[i]);
}
}
kfree(cinfo->other_bitmap_lockres);
}
}
static int gather_bitmaps(struct md_rdev *rdev)
{
int sn, err;
sector_t lo, hi;
struct cluster_msg cmsg = {0};
struct mddev *mddev = rdev->mddev;
struct md_cluster_info *cinfo = mddev->cluster_info;
cmsg.type = cpu_to_le32(RE_ADD);
cmsg.raid_slot = cpu_to_le32(rdev->desc_nr);
md-cluster: use sync way to handle METADATA_UPDATED msg Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-01 17:30:29 +08:00
err = sendmsg(cinfo, &cmsg, 1);
if (err)
goto out;
for (sn = 0; sn < mddev->bitmap_info.nodes; sn++) {
if (sn == (cinfo->slot_number - 1))
continue;
err = bitmap_copy_from_slot(mddev, sn, &lo, &hi, false);
if (err) {
pr_warn("md-cluster: Could not gather bitmaps from slot %d", sn);
goto out;
}
if ((hi > 0) && (lo < mddev->recovery_cp))
mddev->recovery_cp = lo;
}
out:
return err;
}
static struct md_cluster_operations cluster_ops = {
.join = join,
.leave = leave,
.slot_number = slot_number,
.resync_start = resync_start,
.resync_finish = resync_finish,
.resync_info_update = resync_info_update,
.metadata_update_start = metadata_update_start,
.metadata_update_finish = metadata_update_finish,
.metadata_update_cancel = metadata_update_cancel,
.area_resyncing = area_resyncing,
.add_new_disk = add_new_disk,
.add_new_disk_cancel = add_new_disk_cancel,
.new_disk_ack = new_disk_ack,
.remove_disk = remove_disk,
.load_bitmaps = load_bitmaps,
.gather_bitmaps = gather_bitmaps,
.lock_all_bitmaps = lock_all_bitmaps,
.unlock_all_bitmaps = unlock_all_bitmaps,
};
static int __init cluster_init(void)
{
pr_warn("md-cluster: EXPERIMENTAL. Use with caution\n");
pr_info("Registering Cluster MD functions\n");
register_md_cluster_operations(&cluster_ops, THIS_MODULE);
return 0;
}
static void cluster_exit(void)
{
unregister_md_cluster_operations();
}
module_init(cluster_init);
module_exit(cluster_exit);
MODULE_AUTHOR("SUSE");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Clustering support for MD");