OpenCloudOS-Kernel/drivers/gpu/drm/i915/intel_drv.h

1492 lines
49 KiB
C
Raw Normal View History

/*
* Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
* Copyright (c) 2007-2008 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*/
#ifndef __INTEL_DRV_H__
#define __INTEL_DRV_H__
#include <linux/async.h>
#include <linux/i2c.h>
#include <linux/hdmi.h>
#include <drm/i915_drm.h>
#include "i915_drv.h"
#include <drm/drm_crtc.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_fb_helper.h>
2014-05-02 12:02:48 +08:00
#include <drm/drm_dp_mst_helper.h>
#include <drm/drm_rect.h>
#include <drm/drm_atomic.h>
/**
* _wait_for - magic (register) wait macro
*
* Does the right thing for modeset paths when run under kdgb or similar atomic
* contexts. Note that it's important that we check the condition again after
* having timed out, since the timeout could be due to preemption or similar and
* we've never had a chance to check the condition before the timeout.
*/
#define _wait_for(COND, MS, W) ({ \
unsigned long timeout__ = jiffies + msecs_to_jiffies(MS) + 1; \
int ret__ = 0; \
while (!(COND)) { \
if (time_after(jiffies, timeout__)) { \
if (!(COND)) \
ret__ = -ETIMEDOUT; \
break; \
} \
if ((W) && drm_can_sleep()) { \
usleep_range((W)*1000, (W)*2000); \
} else { \
cpu_relax(); \
} \
} \
ret__; \
})
#define wait_for(COND, MS) _wait_for(COND, MS, 1)
#define wait_for_atomic(COND, MS) _wait_for(COND, MS, 0)
#define wait_for_atomic_us(COND, US) _wait_for((COND), \
DIV_ROUND_UP((US), 1000), 0)
#define KHz(x) (1000 * (x))
#define MHz(x) KHz(1000 * (x))
/*
* Display related stuff
*/
/* store information about an Ixxx DVO */
/* The i830->i865 use multiple DVOs with multiple i2cs */
/* the i915, i945 have a single sDVO i2c bus - which is different */
#define MAX_OUTPUTS 6
/* maximum connectors per crtcs in the mode set */
/* Maximum cursor sizes */
#define GEN2_CURSOR_WIDTH 64
#define GEN2_CURSOR_HEIGHT 64
#define MAX_CURSOR_WIDTH 256
#define MAX_CURSOR_HEIGHT 256
#define INTEL_I2C_BUS_DVO 1
#define INTEL_I2C_BUS_SDVO 2
/* these are outputs from the chip - integrated only
external chips are via DVO or SDVO output */
enum intel_output_type {
INTEL_OUTPUT_UNUSED = 0,
INTEL_OUTPUT_ANALOG = 1,
INTEL_OUTPUT_DVO = 2,
INTEL_OUTPUT_SDVO = 3,
INTEL_OUTPUT_LVDS = 4,
INTEL_OUTPUT_TVOUT = 5,
INTEL_OUTPUT_HDMI = 6,
INTEL_OUTPUT_DISPLAYPORT = 7,
INTEL_OUTPUT_EDP = 8,
INTEL_OUTPUT_DSI = 9,
INTEL_OUTPUT_UNKNOWN = 10,
INTEL_OUTPUT_DP_MST = 11,
};
#define INTEL_DVO_CHIP_NONE 0
#define INTEL_DVO_CHIP_LVDS 1
#define INTEL_DVO_CHIP_TMDS 2
#define INTEL_DVO_CHIP_TVOUT 4
#define INTEL_DSI_VIDEO_MODE 0
#define INTEL_DSI_COMMAND_MODE 1
struct intel_framebuffer {
struct drm_framebuffer base;
struct drm_i915_gem_object *obj;
};
struct intel_fbdev {
struct drm_fb_helper helper;
struct intel_framebuffer *fb;
struct list_head fbdev_list;
struct drm_display_mode *our_mode;
drm/i915: Wrap the preallocated BIOS framebuffer and preserve for KMS fbcon v12 Retrieve current framebuffer config info from the regs and create an fb object for the buffer the BIOS or boot loader left us. This should allow for smooth transitions to userspace apps once we finish the initial configuration construction. v2: check for non-native modes and adjust (Jesse) fixup aperture and cmap frees (Imre) use unlocked unref if init_bios fails (Jesse) fix curly brace around DSPADDR check (Imre) comment failure path for pin_and_fence (Imre) v3: fixup fixup of aperture frees (Chris) v4: update to current bits (locking & pin_and_fence hack) (Jesse) v5: move fb config fetch to display code (Jesse) re-order hw state readout on initial load to suit fb inherit (Jesse) re-add pin_and_fence in fbdev code to make sure we refcount properly (Je v6: rename to plane_config (Daniel) check for valid object when initializing BIOS fb (Jesse) split from plane_config readout and other display changes (Jesse) drop use_bios_fb option (Chris) update comments (Jesse) rework fbdev_init_bios for clarity (Jesse) drop fb obj ref under lock (Chris) v7: use fb object from plane_config instead (Ville) take ref on fb object (Jesse) v8: put under i915_fastboot option (Jesse) fix fb ptr checking (Jesse) inform drm_fb_helper if we fail to enable a connector (Jesse) drop unnecessary enabled[] modifications in failure cases (Chris) split from BIOS connector config readout (Daniel) don't memset the fb buffer if preallocated (Chris) alloc ifbdev up front and pass to init_bios (Chris) check for bad ifbdev in restore_mode too (Chris) v9: fix up !fastboot bpp setting (Jesse) fix up !fastboot helper alloc (Jesse) make sure BIOS fb is sufficient for biggest active pipe (Jesse) v10:fix up size calculation for proposed fbs (Chris) go back to two pass pipe fb assignment (Chris) add warning for active pipes w/o fbs (Chris) clean up num_pipes checks in fbdev_init and fbdev_restore_mode (Chris) move i915.fastboot into fbdev_init (Chris) v11:make BIOS connector config usage unconditional (Daniel) v12:fix up fb vs pipe size checking (Chris) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-08 00:57:51 +08:00
int preferred_bpp;
};
struct intel_encoder {
struct drm_encoder base;
drm/i915: stage modeset output changes This is the core of the new modeset logic. The current code which is based upon the crtc helper code first updates all the link of the new display pipeline and then calls the lower-level set_mode function to execute the required callbacks to get there. The issue with this approach is that for disabling we need to know the _current_ display pipe state, not the new one. Hence we need to stage the new state of the display pipe and only update it once we have disabled the current configuration and before we start to update the hw registers with the new configuration. This patch here just prepares the ground by switching the new output state computation to these staging pointers. To make it clearer, rename the old update_output_state function to stage_output_state. A few peculiarities: - We're also calling the set_mode function at various places to update properties. Hence after a successfule modeset we need to stage the current configuration (for otherwise we might fall back again). This happens automatically because as part of the (successful) modeset we need to copy the staged state to the real one. But for the hw readout code we need to make sure that this happens, too. - Teach the new staged output state computation code the required smarts to handle the disabling of outputs. The current code handles this in a special case, but to better handle global modeset changes covering more than one crtc, we want to do this all in the same low-level modeset code. - The actual modeset code is still a bit ugly and wants to know the new crtc->enabled state a bit early. Follow-on patches will clean that up, for now we have to apply the staged output configuration early, outside of the set_mode functions. - Improve/add comments in stage_output_state. Essentially all that is left to do now is move the disabling code into set_mode and then move the staged state update code also into set_mode, at the right place between disabling things and calling the mode_set callbacks for the new configuration. v2: Disabling a crtc works by passing in a NULL mode or fb, userspace doesn't hand in the list of connectors. We therefore need to detect this case manually and tear down all the output links. v3: Properly update the output staging pointers after having read out the hw state. v4: Simplify the code, add more DRM_DEBUG_KMS output and check a few assumptions with WARN_ON. Essentially all things that I've noticed while debugging issues in other places of the code. v4: Correctly disable the old set of connectors when enabling an already enabled crtc on a new set of crtc. Reported by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-06 04:34:27 +08:00
enum intel_output_type type;
unsigned int cloneable;
void (*hot_plug)(struct intel_encoder *);
bool (*compute_config)(struct intel_encoder *,
struct intel_crtc_state *);
void (*pre_pll_enable)(struct intel_encoder *);
void (*pre_enable)(struct intel_encoder *);
void (*enable)(struct intel_encoder *);
void (*mode_set)(struct intel_encoder *intel_encoder);
void (*disable)(struct intel_encoder *);
void (*post_disable)(struct intel_encoder *);
void (*post_pll_disable)(struct intel_encoder *);
/* Read out the current hw state of this connector, returning true if
* the encoder is active. If the encoder is enabled it also set the pipe
* it is connected to in the pipe parameter. */
bool (*get_hw_state)(struct intel_encoder *, enum pipe *pipe);
/* Reconstructs the equivalent mode flags for the current hardware
* state. This must be called _after_ display->get_pipe_config has
* pre-filled the pipe config. Note that intel_encoder->base.crtc must
* be set correctly before calling this function. */
void (*get_config)(struct intel_encoder *,
struct intel_crtc_state *pipe_config);
/*
* Called during system suspend after all pending requests for the
* encoder are flushed (for example for DP AUX transactions) and
* device interrupts are disabled.
*/
void (*suspend)(struct intel_encoder *);
int crtc_mask;
enum hpd_pin hpd_pin;
};
struct intel_panel {
struct drm_display_mode *fixed_mode;
struct drm_display_mode *downclock_mode;
int fitting_mode;
/* backlight */
struct {
bool present;
u32 level;
u32 min;
u32 max;
bool enabled;
bool combination_mode; /* gen 2/4 only */
bool active_low_pwm;
/* PWM chip */
drm/i915/bxt: Modify BXT BLC according to VBT changes Latest VBT mentions which set of registers will be used for BLC, as controller number field. Making use of this field in BXT BLC implementation. Also, the registers are used in case control pin indicates display DDI. Adding a check for this. According to Bspec, BLC_PWM_*_2 uses the display utility pin for output. To use backlight 2, enable the utility pin with mode = PWM v2: Jani's review comments addressed - Add a prefix _ to BXT BLC registers definitions. - Add "bxt only" comment for u8 controller - Remove control_pin check for DDI controller - Check for valid controller values - Set pipe bits in UTIL_PIN_CTL - Enable/Disable UTIL_PIN_CTL in enable/disable_backlight() - If BLC 2 is used, read active_low_pwm from UTIL_PIN polarity Satheesh's review comment addressed - If UTIL PIN is already enabled, BIOS would have programmed it. No need to disable and enable again. v3: Jani's review comments - add UTIL_PIN_PIPE_MASK and UTIL_PIN_MODE_MASK - Disable UTIL_PIN if controller 1 is used - Mask out UTIL_PIN_PIPE_MASK and UTIL_PIN_MODE_MASK before enabling UTIL_PIN - check valid controller value in intel_bios.c - add backlight.util_pin_active_low - disable util pin before enabling v4: Change for BXT-PO branch: Stubbed unwanted definition which was existing before because of DC6 patch. UTIL_PIN_MODE_PWM (0x1b << 24) v2: Fixed Jani's review comment. v3: Split the backight PWM frequency programming into separate patch, in cases BIOS doesn't initializes it. v4: Starting afresh and not modifying existing state for backlight, as per Jani's recommendation. v5: Fixed Jani's review comment wrt util pin enable Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Signed-off-by: Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-01 01:04:57 +08:00
bool util_pin_active_low; /* bxt+ */
u8 controller; /* bxt+ only */
struct pwm_device *pwm;
struct backlight_device *device;
/* Connector and platform specific backlight functions */
int (*setup)(struct intel_connector *connector, enum pipe pipe);
uint32_t (*get)(struct intel_connector *connector);
void (*set)(struct intel_connector *connector, uint32_t level);
void (*disable)(struct intel_connector *connector);
void (*enable)(struct intel_connector *connector);
uint32_t (*hz_to_pwm)(struct intel_connector *connector,
uint32_t hz);
void (*power)(struct intel_connector *, bool enable);
} backlight;
};
struct intel_connector {
struct drm_connector base;
drm/i915: stage modeset output changes This is the core of the new modeset logic. The current code which is based upon the crtc helper code first updates all the link of the new display pipeline and then calls the lower-level set_mode function to execute the required callbacks to get there. The issue with this approach is that for disabling we need to know the _current_ display pipe state, not the new one. Hence we need to stage the new state of the display pipe and only update it once we have disabled the current configuration and before we start to update the hw registers with the new configuration. This patch here just prepares the ground by switching the new output state computation to these staging pointers. To make it clearer, rename the old update_output_state function to stage_output_state. A few peculiarities: - We're also calling the set_mode function at various places to update properties. Hence after a successfule modeset we need to stage the current configuration (for otherwise we might fall back again). This happens automatically because as part of the (successful) modeset we need to copy the staged state to the real one. But for the hw readout code we need to make sure that this happens, too. - Teach the new staged output state computation code the required smarts to handle the disabling of outputs. The current code handles this in a special case, but to better handle global modeset changes covering more than one crtc, we want to do this all in the same low-level modeset code. - The actual modeset code is still a bit ugly and wants to know the new crtc->enabled state a bit early. Follow-on patches will clean that up, for now we have to apply the staged output configuration early, outside of the set_mode functions. - Improve/add comments in stage_output_state. Essentially all that is left to do now is move the disabling code into set_mode and then move the staged state update code also into set_mode, at the right place between disabling things and calling the mode_set callbacks for the new configuration. v2: Disabling a crtc works by passing in a NULL mode or fb, userspace doesn't hand in the list of connectors. We therefore need to detect this case manually and tear down all the output links. v3: Properly update the output staging pointers after having read out the hw state. v4: Simplify the code, add more DRM_DEBUG_KMS output and check a few assumptions with WARN_ON. Essentially all things that I've noticed while debugging issues in other places of the code. v4: Correctly disable the old set of connectors when enabling an already enabled crtc on a new set of crtc. Reported by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-06 04:34:27 +08:00
/*
* The fixed encoder this connector is connected to.
*/
struct intel_encoder *encoder;
drm/i915: stage modeset output changes This is the core of the new modeset logic. The current code which is based upon the crtc helper code first updates all the link of the new display pipeline and then calls the lower-level set_mode function to execute the required callbacks to get there. The issue with this approach is that for disabling we need to know the _current_ display pipe state, not the new one. Hence we need to stage the new state of the display pipe and only update it once we have disabled the current configuration and before we start to update the hw registers with the new configuration. This patch here just prepares the ground by switching the new output state computation to these staging pointers. To make it clearer, rename the old update_output_state function to stage_output_state. A few peculiarities: - We're also calling the set_mode function at various places to update properties. Hence after a successfule modeset we need to stage the current configuration (for otherwise we might fall back again). This happens automatically because as part of the (successful) modeset we need to copy the staged state to the real one. But for the hw readout code we need to make sure that this happens, too. - Teach the new staged output state computation code the required smarts to handle the disabling of outputs. The current code handles this in a special case, but to better handle global modeset changes covering more than one crtc, we want to do this all in the same low-level modeset code. - The actual modeset code is still a bit ugly and wants to know the new crtc->enabled state a bit early. Follow-on patches will clean that up, for now we have to apply the staged output configuration early, outside of the set_mode functions. - Improve/add comments in stage_output_state. Essentially all that is left to do now is move the disabling code into set_mode and then move the staged state update code also into set_mode, at the right place between disabling things and calling the mode_set callbacks for the new configuration. v2: Disabling a crtc works by passing in a NULL mode or fb, userspace doesn't hand in the list of connectors. We therefore need to detect this case manually and tear down all the output links. v3: Properly update the output staging pointers after having read out the hw state. v4: Simplify the code, add more DRM_DEBUG_KMS output and check a few assumptions with WARN_ON. Essentially all things that I've noticed while debugging issues in other places of the code. v4: Correctly disable the old set of connectors when enabling an already enabled crtc on a new set of crtc. Reported by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-06 04:34:27 +08:00
/* Reads out the current hw, returning true if the connector is enabled
* and active (i.e. dpms ON state). */
bool (*get_hw_state)(struct intel_connector *);
/*
* Removes all interfaces through which the connector is accessible
* - like sysfs, debugfs entries -, so that no new operations can be
* started on the connector. Also makes sure all currently pending
* operations finish before returing.
*/
void (*unregister)(struct intel_connector *);
/* Panel info for eDP and LVDS */
struct intel_panel panel;
/* Cached EDID for eDP and LVDS. May hold ERR_PTR for invalid EDID. */
struct edid *edid;
struct edid *detect_edid;
/* since POLL and HPD connectors may use the same HPD line keep the native
state of connector->polled in case hotplug storm detection changes it */
u8 polled;
2014-05-02 12:02:48 +08:00
void *port; /* store this opaque as its illegal to dereference it */
struct intel_dp *mst_port;
};
typedef struct dpll {
/* given values */
int n;
int m1, m2;
int p1, p2;
/* derived values */
int dot;
int vco;
int m;
int p;
} intel_clock_t;
struct intel_atomic_state {
struct drm_atomic_state base;
unsigned int cdclk;
bool dpll_set;
struct intel_shared_dpll_config shared_dpll[I915_NUM_PLLS];
struct intel_wm_config wm_config;
};
struct intel_plane_state {
struct drm_plane_state base;
struct drm_rect src;
struct drm_rect dst;
struct drm_rect clip;
bool visible;
drm/i915: Refactor work that can sleep out of commit (v7) Once we integrate our work into the atomic pipeline, plane commit operations will need to happen with interrupts disabled, due to vblank evasion. Our commit functions today include sleepable work, so those operations need to be split out and run either before or after the atomic register programming. The solution here calculates which of those operations will need to be performed during the 'check' phase and sets flags in an intel_crtc sub-struct. New intel_begin_crtc_commit() and intel_finish_crtc_commit() functions are added before and after the actual register programming; these will eventually be called from the atomic plane helper's .atomic_begin() and .atomic_end() entrypoints. v2: Fix broken sprite code split v3: Make the pre/post commit work crtc-based to match how we eventually want this to be called from the atomic plane helpers. v4: Some platforms that haven't had their watermark code reworked were waiting for vblank, then calling update_sprite_watermarks in their platform-specific disable code. These also need to be flagged out of the critical section. v5: Sprite plane test for primary show/hide should just set the flag to wait for pending flips, not actually perform the wait. (Ander) v6: - Rebase onto latest di-nightly; picks up an important runtime PM fix. - Handle 'wait_for_flips' flag in intel_begin_crtc_commit(). (Ander) - Use wait_for_flips flag for primary plane update rather than performing the wait in the check routine. - Added kerneldoc to pre_disable/post_enable functions that are no longer static. (Ander) - Replace assert_pipe_enabled() in intel_disable_primary_hw_plane() with an intel_crtc->active test; it turns out assert_pipe_enabled() grabs some mutexes and can sleep, which we can't do with interrupts disabled. v7: - Check for fb != NULL when deciding whether the sprite plane hides the primary plane during a sprite update. (PRTS) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-24 23:59:06 +08:00
/*
* scaler_id
* = -1 : not using a scaler
* >= 0 : using a scalers
*
* plane requiring a scaler:
* - During check_plane, its bit is set in
* crtc_state->scaler_state.scaler_users by calling helper function
* update_scaler_plane.
* - scaler_id indicates the scaler it got assigned.
*
* plane doesn't require a scaler:
* - this can happen when scaling is no more required or plane simply
* got disabled.
* - During check_plane, corresponding bit is reset in
* crtc_state->scaler_state.scaler_users by calling helper function
* update_scaler_plane.
*/
int scaler_id;
struct drm_intel_sprite_colorkey ckey;
/* async flip related structures */
struct drm_i915_gem_request *wait_req;
};
struct intel_initial_plane_config {
struct intel_framebuffer *fb;
unsigned int tiling;
int size;
u32 base;
};
#define SKL_MIN_SRC_W 8
#define SKL_MAX_SRC_W 4096
#define SKL_MIN_SRC_H 8
#define SKL_MAX_SRC_H 4096
#define SKL_MIN_DST_W 8
#define SKL_MAX_DST_W 4096
#define SKL_MIN_DST_H 8
#define SKL_MAX_DST_H 4096
struct intel_scaler {
int in_use;
uint32_t mode;
};
struct intel_crtc_scaler_state {
#define SKL_NUM_SCALERS 2
struct intel_scaler scalers[SKL_NUM_SCALERS];
/*
* scaler_users: keeps track of users requesting scalers on this crtc.
*
* If a bit is set, a user is using a scaler.
* Here user can be a plane or crtc as defined below:
* bits 0-30 - plane (bit position is index from drm_plane_index)
* bit 31 - crtc
*
* Instead of creating a new index to cover planes and crtc, using
* existing drm_plane_index for planes which is well less than 31
* planes and bit 31 for crtc. This should be fine to cover all
* our platforms.
*
* intel_atomic_setup_scalers will setup available scalers to users
* requesting scalers. It will gracefully fail if request exceeds
* avilability.
*/
#define SKL_CRTC_INDEX 31
unsigned scaler_users;
/* scaler used by crtc for panel fitting purpose */
int scaler_id;
};
/* drm_mode->private_flags */
#define I915_MODE_FLAG_INHERITED 1
struct intel_pipe_wm {
struct intel_wm_level wm[5];
uint32_t linetime;
bool fbc_wm_enabled;
bool pipe_enabled;
bool sprites_enabled;
bool sprites_scaled;
};
struct skl_pipe_wm {
struct skl_wm_level wm[8];
struct skl_wm_level trans_wm;
uint32_t linetime;
};
struct intel_crtc_state {
struct drm_crtc_state base;
/**
* quirks - bitfield with hw state readout quirks
*
* For various reasons the hw state readout code might not be able to
* completely faithfully read out the current state. These cases are
* tracked with quirk flags so that fastboot and state checker can act
* accordingly.
*/
#define PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS (1<<0) /* unreliable sync mode.flags */
unsigned long quirks;
bool update_pipe;
/* Pipe source size (ie. panel fitter input size)
* All planes will be positioned inside this space,
* and get clipped at the edges. */
int pipe_src_w, pipe_src_h;
/* Whether to set up the PCH/FDI. Note that we never allow sharing
* between pch encoders and cpu encoders. */
bool has_pch_encoder;
/* Are we sending infoframes on the attached port */
bool has_infoframe;
/* CPU Transcoder for the pipe. Currently this can only differ from the
* pipe on Haswell (where we have a special eDP transcoder). */
enum transcoder cpu_transcoder;
/*
* Use reduced/limited/broadcast rbg range, compressing from the full
* range fed into the crtcs.
*/
bool limited_color_range;
/* DP has a bunch of special case unfortunately, so mark the pipe
* accordingly. */
bool has_dp_encoder;
/* Whether we should send NULL infoframes. Required for audio. */
bool has_hdmi_sink;
/* Audio enabled on this pipe. Only valid if either has_hdmi_sink or
* has_dp_encoder is set. */
bool has_audio;
/*
* Enable dithering, used when the selected pipe bpp doesn't match the
* plane bpp.
*/
bool dither;
/* Controls for the clock computation, to override various stages. */
bool clock_set;
/* SDVO TV has a bunch of special case. To make multifunction encoders
* work correctly, we need to track this at runtime.*/
bool sdvo_tv_clock;
drm/i915: implement fdi auto-dithering So on a bunch of setups we only have 2 fdi lanes available, e.g. hsw VGA or 3 pipes on ivb. And seemingly a lot of modes don't quite fit into this, among them the default 1080p mode. The solution is to dither down the pipe a bit so that everything fits, which this patch implements. But ports compute their state under the assumption that the bpp they pick will be the one selected, e.g. the display port bw computations won't work otherwise. Now we could adjust our code to again up-dither to the computed DP link parameters, but that's pointless. So instead when the pipe needs to adjust parameters we need to retry the pipe_config computation at the encoder stage. Furthermore we need to inform encoders that they should not increase bandwidth requirements if possible. This is required for the hdmi code, which prefers the pipe to up-dither to either of the two possible hdmi bpc values. LVDS has a similar requirement, although that's probably only theoretical in nature: It's unlikely that we'll ever see an 8bpc high-res lvds panel (which is required to hit the 2 fdi lane limit). eDP is the only thing which could increase the pipe_bpp setting again, even when in the retry-loop. This could hit the WARN. Two reasons for not bothering: - On many eDP panels we'll get a black screen if the bpp settings don't match vbt. So failing the modeset is the right thing to do. But since that also means it's the only way to light up the panel, it should work. So we shouldn't be able to hit this WARN. - There are still opens around the eDP panel handling, and maybe we need additional tricks. Before that happens it's imo no use trying to be too clever. Worst case we just need to kill that WARN or maybe fail the compute config stage if the eDP connector can't get the bpp setting it wants. And since this can only happen with an fdi link in between and so for pch eDP panels it's rather unlikely to blow up, if ever. v2: Rebased on top of a bikeshed from Paulo. v3: Improve commit message around eDP handling with the stuff things with Imre. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-21 07:00:16 +08:00
/*
* crtc bandwidth limit, don't increase pipe bpp or clock if not really
* required. This is set in the 2nd loop of calling encoder's
* ->compute_config if the first pick doesn't work out.
*/
bool bw_constrained;
/* Settings for the intel dpll used on pretty much everything but
* haswell. */
struct dpll dpll;
/* Selected dpll when shared or DPLL_ID_PRIVATE. */
enum intel_dpll_id shared_dpll;
/*
* - PORT_CLK_SEL for DDI ports on HSW/BDW.
* - enum skl_dpll on SKL
*/
uint32_t ddi_pll_sel;
/* Actual register state of the dpll, for shared dpll cross-checking. */
struct intel_dpll_hw_state dpll_hw_state;
int pipe_bpp;
drm/i915: clear up the fdi/dp set_m_n confusion There's a rather decent confusion going on around transcoder m_n values. So let's clarify: - All dp encoders need this, either on the pch transcoder if it's a pch port, or on the cpu transcoder/pipe if it's a cpu port. - fdi links need to have the right m_n values for the fdi link set in the cpu transcoder. To handle the pch vs transcoder stuff a bit better, extract transcoder set_m_n helpers. To make them simpler, set intel_crtc->cpu_transcoder als in ironlake_crtc_mode_set, so that gen5+ (where the cpu m_n registers are all at the same offset) can use it. Haswell modeset is decently confused about dp vs. edp vs. fdi. dp vs. edp works exactly the same as dp (since there's no pch dp any more), so use that as a check. And only set up the fdi m_n values if we really have a pch encoder present (which means we have a VGA encoder). On ilk+ we've called ironlake_set_m_n both for cpu_edp and for pch encoders. Now that dp_set_m_n handles all dp links (thanks to the pch encoder check), we can ditch the cpu_edp stuff from the fdi_set_m_n function. Since the dp_m_n values are not readily available, we need to carefully coax the edp values out of the encoder. Hence we can't (yet) kill this superflous complexity. v2: Rebase on top of the ivb fdi B/C check patch - we need to properly clear intel_crtc->fdi_lane, otherwise those checks will misfire. v3: Rebased on top of a s/IS_HASWELL/HAS_DDI/ patch from Paulo Zanoni. v4: Drop the addition of has_dp_encoder, it's in the wrong patch (Jesse). Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-03 05:38:10 +08:00
struct intel_link_m_n dp_m_n;
drm/i915: store adjusted dotclock in adjusted_mode->clock ... not the port clock. This allows us to kill the funny semantics around pixel_target_clock. Since the dpll code still needs the real port clock, add a new port_clock field to the pipe configuration. Handling the default case for that one is a bit tricky, since encoders might not consistently overwrite it when retrying the crtc/encoder bw arbitrage step in the compute config stage. Hence we need to always clear port_clock and update it again if the encoder hasn't put in something more specific. This can't be done in one step since the encoder might want to adjust the mode first. I was a bit on the fence whether I should subsume the pixel multiplier handling into the port_clock, too. But then I decided against this since it's on an abstract level still the dotclock of the adjusted mode, and only our hw makes it a bit special due to the separate pixel mulitplier setting (which requires that the dpll runs at the non-multiplied dotclock). So after this patch the adjusted_mode accurately describes the mode we feed into the port, after the panel fitter and pixel multiplier (or line doubling, if we ever bother with that) have done their job. Since the fdi link is between the pfit and the pixel multiplier steps we need to be careful with calculating the fdi link config. v2: Fix up ilk cpu pll handling. v3: Introduce an fdi_dotclock variable in ironlake_fdi_compute_config to make it clearer that we transmit the adjusted_mode without the pixel multiplier taken into account. The old code multiplied the the available link bw with the pixel multiplier, which results in the same fdi configuration, but is much more confusing. v4: Rebase on top of Imre's is_cpu_edp removal. v5: Rebase on top of Paulo's haswell watermark fixes, which introduce a new place which looked at the pixel_clock and so needed conversion. v6: Split out prep patches as requested by Paulo Zanoni. Also rebase on top of the fdi dotclock handling fix in the fdi lanes/bw computation code. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-01 23:16:21 +08:00
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
/* m2_n2 for eDP downclock */
struct intel_link_m_n dp_m2_n2;
bool has_drrs;
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
drm/i915: store adjusted dotclock in adjusted_mode->clock ... not the port clock. This allows us to kill the funny semantics around pixel_target_clock. Since the dpll code still needs the real port clock, add a new port_clock field to the pipe configuration. Handling the default case for that one is a bit tricky, since encoders might not consistently overwrite it when retrying the crtc/encoder bw arbitrage step in the compute config stage. Hence we need to always clear port_clock and update it again if the encoder hasn't put in something more specific. This can't be done in one step since the encoder might want to adjust the mode first. I was a bit on the fence whether I should subsume the pixel multiplier handling into the port_clock, too. But then I decided against this since it's on an abstract level still the dotclock of the adjusted mode, and only our hw makes it a bit special due to the separate pixel mulitplier setting (which requires that the dpll runs at the non-multiplied dotclock). So after this patch the adjusted_mode accurately describes the mode we feed into the port, after the panel fitter and pixel multiplier (or line doubling, if we ever bother with that) have done their job. Since the fdi link is between the pfit and the pixel multiplier steps we need to be careful with calculating the fdi link config. v2: Fix up ilk cpu pll handling. v3: Introduce an fdi_dotclock variable in ironlake_fdi_compute_config to make it clearer that we transmit the adjusted_mode without the pixel multiplier taken into account. The old code multiplied the the available link bw with the pixel multiplier, which results in the same fdi configuration, but is much more confusing. v4: Rebase on top of Imre's is_cpu_edp removal. v5: Rebase on top of Paulo's haswell watermark fixes, which introduce a new place which looked at the pixel_clock and so needed conversion. v6: Split out prep patches as requested by Paulo Zanoni. Also rebase on top of the fdi dotclock handling fix in the fdi lanes/bw computation code. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-01 23:16:21 +08:00
/*
* Frequence the dpll for the port should run at. Differs from the
* adjusted dotclock e.g. for DP or 12bpc hdmi mode. This is also
* already multiplied by pixel_multiplier.
*/
drm/i915: store adjusted dotclock in adjusted_mode->clock ... not the port clock. This allows us to kill the funny semantics around pixel_target_clock. Since the dpll code still needs the real port clock, add a new port_clock field to the pipe configuration. Handling the default case for that one is a bit tricky, since encoders might not consistently overwrite it when retrying the crtc/encoder bw arbitrage step in the compute config stage. Hence we need to always clear port_clock and update it again if the encoder hasn't put in something more specific. This can't be done in one step since the encoder might want to adjust the mode first. I was a bit on the fence whether I should subsume the pixel multiplier handling into the port_clock, too. But then I decided against this since it's on an abstract level still the dotclock of the adjusted mode, and only our hw makes it a bit special due to the separate pixel mulitplier setting (which requires that the dpll runs at the non-multiplied dotclock). So after this patch the adjusted_mode accurately describes the mode we feed into the port, after the panel fitter and pixel multiplier (or line doubling, if we ever bother with that) have done their job. Since the fdi link is between the pfit and the pixel multiplier steps we need to be careful with calculating the fdi link config. v2: Fix up ilk cpu pll handling. v3: Introduce an fdi_dotclock variable in ironlake_fdi_compute_config to make it clearer that we transmit the adjusted_mode without the pixel multiplier taken into account. The old code multiplied the the available link bw with the pixel multiplier, which results in the same fdi configuration, but is much more confusing. v4: Rebase on top of Imre's is_cpu_edp removal. v5: Rebase on top of Paulo's haswell watermark fixes, which introduce a new place which looked at the pixel_clock and so needed conversion. v6: Split out prep patches as requested by Paulo Zanoni. Also rebase on top of the fdi dotclock handling fix in the fdi lanes/bw computation code. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-01 23:16:21 +08:00
int port_clock;
/* Used by SDVO (and if we ever fix it, HDMI). */
unsigned pixel_multiplier;
uint8_t lane_count;
/* Panel fitter controls for gen2-gen4 + VLV */
struct {
u32 control;
u32 pgm_ratios;
u32 lvds_border_bits;
} gmch_pfit;
/* Panel fitter placement and size for Ironlake+ */
struct {
u32 pos;
u32 size;
bool enabled;
bool force_thru;
} pch_pfit;
/* FDI configuration, only valid if has_pch_encoder is set. */
int fdi_lanes;
struct intel_link_m_n fdi_m_n;
bool ips_enabled;
bool double_wide;
2014-05-02 12:02:48 +08:00
bool dp_encoder_is_mst;
int pbn;
struct intel_crtc_scaler_state scaler_state;
/* w/a for waiting 2 vblanks during crtc enable */
enum pipe hsw_workaround_pipe;
/* IVB sprite scaling w/a (WaCxSRDisabledForSpriteScaling:ivb) */
bool disable_lp_wm;
struct {
/*
* optimal watermarks, programmed post-vblank when this state
* is committed
*/
union {
struct intel_pipe_wm ilk;
struct skl_pipe_wm skl;
} optimal;
} wm;
};
struct vlv_wm_state {
struct vlv_pipe_wm wm[3];
struct vlv_sr_wm sr[3];
uint8_t num_active_planes;
uint8_t num_levels;
uint8_t level;
bool cxsr;
};
drm/i915: Replaced Blitter ring based flips with MMIO flips This patch enables the framework for using MMIO based flip calls, in contrast with the CS based flip calls which are being used currently. MMIO based flip calls can be enabled on architectures where Render and Blitter engines reside in different power wells. The decision to use MMIO flips can be made based on workloads to give 100% residency for Media power well. v2: The MMIO flips now use the interrupt driven mechanism for issuing the flips when target seqno is reached. (Incorporating Ville's idea) v3: Rebasing on latest code. Code restructuring after incorporating Damien's comments v4: Addressing Ville's review comments -general cleanup -updating only base addr instead of calling update_primary_plane -extending patch for gen5+ platforms v5: Addressed Ville's review comments -Making mmio flip vs cs flip selection based on module parameter -Adding check for DRIVER_MODESET feature in notify_ring before calling notify mmio flip. -Other changes mostly in function arguments v6: -Having a seperate function to check condition for using mmio flips (Ville) -propogating error code from i915_gem_check_olr (Ville) v7: -Adding __must_check with i915_gem_check_olr (Chris) -Renaming mmio_flip_data to mmio_flip (Chris) -Rebasing on latest nightly v8: -Rebasing on latest code -squash 3rd patch in series(mmio setbase vs page flip race) with this patch -Added new tiling mode update in intel_do_mmio_flip (Chris) v9: -check for obj->last_write_seqno being 0 instead of obj->ring being NULL in intel_postpone_flip, as this is a more restrictive condition (Chris) v10: -Applied Chris's suggestions for squashing patches 2,3 into this patch. These patches make the selection of CS vs MMIO flip at the page flip time, and make the module parameter for using mmio flips as tristate, the states being 'force CS flips', 'force mmio flips', 'driver discretion'. Changed the logic for driver discretion (Chris) v11: Minor code cleanup(better readability, fixing whitespace errors, using lockdep to check mutex locked status in postpone_flip, removal of __must_check in function definition) (Chris) Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Sourab Gupta <sourab.gupta@intel.com> Signed-off-by: Akash Goel <akash.goel@intel.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> # snb, ivb [danvet: Fix up parameter alignement checkpatch spotted.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-02 19:17:17 +08:00
struct intel_mmio_flip {
struct work_struct work;
struct drm_i915_private *i915;
struct drm_i915_gem_request *req;
struct intel_crtc *crtc;
unsigned int rotation;
drm/i915: Replaced Blitter ring based flips with MMIO flips This patch enables the framework for using MMIO based flip calls, in contrast with the CS based flip calls which are being used currently. MMIO based flip calls can be enabled on architectures where Render and Blitter engines reside in different power wells. The decision to use MMIO flips can be made based on workloads to give 100% residency for Media power well. v2: The MMIO flips now use the interrupt driven mechanism for issuing the flips when target seqno is reached. (Incorporating Ville's idea) v3: Rebasing on latest code. Code restructuring after incorporating Damien's comments v4: Addressing Ville's review comments -general cleanup -updating only base addr instead of calling update_primary_plane -extending patch for gen5+ platforms v5: Addressed Ville's review comments -Making mmio flip vs cs flip selection based on module parameter -Adding check for DRIVER_MODESET feature in notify_ring before calling notify mmio flip. -Other changes mostly in function arguments v6: -Having a seperate function to check condition for using mmio flips (Ville) -propogating error code from i915_gem_check_olr (Ville) v7: -Adding __must_check with i915_gem_check_olr (Chris) -Renaming mmio_flip_data to mmio_flip (Chris) -Rebasing on latest nightly v8: -Rebasing on latest code -squash 3rd patch in series(mmio setbase vs page flip race) with this patch -Added new tiling mode update in intel_do_mmio_flip (Chris) v9: -check for obj->last_write_seqno being 0 instead of obj->ring being NULL in intel_postpone_flip, as this is a more restrictive condition (Chris) v10: -Applied Chris's suggestions for squashing patches 2,3 into this patch. These patches make the selection of CS vs MMIO flip at the page flip time, and make the module parameter for using mmio flips as tristate, the states being 'force CS flips', 'force mmio flips', 'driver discretion'. Changed the logic for driver discretion (Chris) v11: Minor code cleanup(better readability, fixing whitespace errors, using lockdep to check mutex locked status in postpone_flip, removal of __must_check in function definition) (Chris) Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Sourab Gupta <sourab.gupta@intel.com> Signed-off-by: Akash Goel <akash.goel@intel.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> # snb, ivb [danvet: Fix up parameter alignement checkpatch spotted.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-02 19:17:17 +08:00
};
drm/i915: Refactor work that can sleep out of commit (v7) Once we integrate our work into the atomic pipeline, plane commit operations will need to happen with interrupts disabled, due to vblank evasion. Our commit functions today include sleepable work, so those operations need to be split out and run either before or after the atomic register programming. The solution here calculates which of those operations will need to be performed during the 'check' phase and sets flags in an intel_crtc sub-struct. New intel_begin_crtc_commit() and intel_finish_crtc_commit() functions are added before and after the actual register programming; these will eventually be called from the atomic plane helper's .atomic_begin() and .atomic_end() entrypoints. v2: Fix broken sprite code split v3: Make the pre/post commit work crtc-based to match how we eventually want this to be called from the atomic plane helpers. v4: Some platforms that haven't had their watermark code reworked were waiting for vblank, then calling update_sprite_watermarks in their platform-specific disable code. These also need to be flagged out of the critical section. v5: Sprite plane test for primary show/hide should just set the flag to wait for pending flips, not actually perform the wait. (Ander) v6: - Rebase onto latest di-nightly; picks up an important runtime PM fix. - Handle 'wait_for_flips' flag in intel_begin_crtc_commit(). (Ander) - Use wait_for_flips flag for primary plane update rather than performing the wait in the check routine. - Added kerneldoc to pre_disable/post_enable functions that are no longer static. (Ander) - Replace assert_pipe_enabled() in intel_disable_primary_hw_plane() with an intel_crtc->active test; it turns out assert_pipe_enabled() grabs some mutexes and can sleep, which we can't do with interrupts disabled. v7: - Check for fb != NULL when deciding whether the sprite plane hides the primary plane during a sprite update. (PRTS) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-24 23:59:06 +08:00
/*
* Tracking of operations that need to be performed at the beginning/end of an
* atomic commit, outside the atomic section where interrupts are disabled.
* These are generally operations that grab mutexes or might otherwise sleep
* and thus can't be run with interrupts disabled.
*/
struct intel_crtc_atomic_commit {
/* Sleepable operations to perform before commit */
bool disable_fbc;
bool disable_ips;
bool disable_cxsr;
drm/i915: Refactor work that can sleep out of commit (v7) Once we integrate our work into the atomic pipeline, plane commit operations will need to happen with interrupts disabled, due to vblank evasion. Our commit functions today include sleepable work, so those operations need to be split out and run either before or after the atomic register programming. The solution here calculates which of those operations will need to be performed during the 'check' phase and sets flags in an intel_crtc sub-struct. New intel_begin_crtc_commit() and intel_finish_crtc_commit() functions are added before and after the actual register programming; these will eventually be called from the atomic plane helper's .atomic_begin() and .atomic_end() entrypoints. v2: Fix broken sprite code split v3: Make the pre/post commit work crtc-based to match how we eventually want this to be called from the atomic plane helpers. v4: Some platforms that haven't had their watermark code reworked were waiting for vblank, then calling update_sprite_watermarks in their platform-specific disable code. These also need to be flagged out of the critical section. v5: Sprite plane test for primary show/hide should just set the flag to wait for pending flips, not actually perform the wait. (Ander) v6: - Rebase onto latest di-nightly; picks up an important runtime PM fix. - Handle 'wait_for_flips' flag in intel_begin_crtc_commit(). (Ander) - Use wait_for_flips flag for primary plane update rather than performing the wait in the check routine. - Added kerneldoc to pre_disable/post_enable functions that are no longer static. (Ander) - Replace assert_pipe_enabled() in intel_disable_primary_hw_plane() with an intel_crtc->active test; it turns out assert_pipe_enabled() grabs some mutexes and can sleep, which we can't do with interrupts disabled. v7: - Check for fb != NULL when deciding whether the sprite plane hides the primary plane during a sprite update. (PRTS) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-24 23:59:06 +08:00
bool pre_disable_primary;
bool update_wm_pre, update_wm_post;
drm/i915: Refactor work that can sleep out of commit (v7) Once we integrate our work into the atomic pipeline, plane commit operations will need to happen with interrupts disabled, due to vblank evasion. Our commit functions today include sleepable work, so those operations need to be split out and run either before or after the atomic register programming. The solution here calculates which of those operations will need to be performed during the 'check' phase and sets flags in an intel_crtc sub-struct. New intel_begin_crtc_commit() and intel_finish_crtc_commit() functions are added before and after the actual register programming; these will eventually be called from the atomic plane helper's .atomic_begin() and .atomic_end() entrypoints. v2: Fix broken sprite code split v3: Make the pre/post commit work crtc-based to match how we eventually want this to be called from the atomic plane helpers. v4: Some platforms that haven't had their watermark code reworked were waiting for vblank, then calling update_sprite_watermarks in their platform-specific disable code. These also need to be flagged out of the critical section. v5: Sprite plane test for primary show/hide should just set the flag to wait for pending flips, not actually perform the wait. (Ander) v6: - Rebase onto latest di-nightly; picks up an important runtime PM fix. - Handle 'wait_for_flips' flag in intel_begin_crtc_commit(). (Ander) - Use wait_for_flips flag for primary plane update rather than performing the wait in the check routine. - Added kerneldoc to pre_disable/post_enable functions that are no longer static. (Ander) - Replace assert_pipe_enabled() in intel_disable_primary_hw_plane() with an intel_crtc->active test; it turns out assert_pipe_enabled() grabs some mutexes and can sleep, which we can't do with interrupts disabled. v7: - Check for fb != NULL when deciding whether the sprite plane hides the primary plane during a sprite update. (PRTS) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-24 23:59:06 +08:00
/* Sleepable operations to perform after commit */
unsigned fb_bits;
bool wait_vblank;
bool update_fbc;
bool post_enable_primary;
unsigned update_sprite_watermarks;
};
struct intel_crtc {
struct drm_crtc base;
enum pipe pipe;
enum plane plane;
u8 lut_r[256], lut_g[256], lut_b[256];
/*
* Whether the crtc and the connected output pipeline is active. Implies
* that crtc->enabled is set, i.e. the current mode configuration has
* some outputs connected to this crtc.
*/
bool active;
unsigned long enabled_power_domains;
bool lowfreq_avail;
struct intel_overlay *overlay;
struct intel_unpin_work *unpin_work;
atomic_t unpin_work_count;
/* Display surface base address adjustement for pageflips. Note that on
* gen4+ this only adjusts up to a tile, offsets within a tile are
* handled in the hw itself (with the TILEOFF register). */
unsigned long dspaddr_offset;
int adjusted_x;
int adjusted_y;
struct drm_i915_gem_object *cursor_bo;
uint32_t cursor_addr;
uint32_t cursor_cntl;
uint32_t cursor_size;
uint32_t cursor_base;
drm/i915: Make intel_crtc->config a pointer To match the semantics of drm_crtc->state, which this will eventually become. The allocation of the memory for config will be fixed in a followup patch. By adding the extra _config field to intel_crtc it was possible to generate this entire patch with the cocci script below. @@ @@ struct intel_crtc { ... -struct intel_crtc_state config; +struct intel_crtc_state _config; +struct intel_crtc_state *config; ... } @@ struct intel_crtc *crtc; @@ -memset(&crtc->config, 0, sizeof(crtc->config)); +memset(crtc->config, 0, sizeof(*crtc->config)); @@ @@ __intel_set_mode(...) { <... -to_intel_crtc(crtc)->config = *pipe_config; +(*(to_intel_crtc(crtc)->config)) = *pipe_config; ...> } @@ @@ intel_crtc_init(...) { ... WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe); +intel_crtc->config = &intel_crtc->_config; return; ... } @@ struct intel_crtc *crtc; @@ -&crtc->config +crtc->config @@ struct intel_crtc *crtc; identifier member; @@ -crtc->config.member +crtc->config->member @@ expression E; @@ -&(to_intel_crtc(E)->config) +to_intel_crtc(E)->config @@ expression E; identifier member; @@ -to_intel_crtc(E)->config.member +to_intel_crtc(E)->config->member v2: Clarify manual changes by splitting them into another patch. (Matt) Improve cocci script to generate even more of the changes. (Ander) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-15 20:55:25 +08:00
struct intel_crtc_state *config;
/* reset counter value when the last flip was submitted */
unsigned int reset_counter;
/* Access to these should be protected by dev_priv->irq_lock. */
bool cpu_fifo_underrun_disabled;
bool pch_fifo_underrun_disabled;
/* per-pipe watermark state */
struct {
/* watermarks currently being used */
union {
struct intel_pipe_wm ilk;
struct skl_pipe_wm skl;
} active;
/* allow CxSR on this pipe */
bool cxsr_allowed;
} wm;
drm/i915: Make sprite updates atomic Add a mechanism by which we can evade the leading edge of vblank. This guarantees that no two sprite register writes will straddle on either side of the vblank start, and that means all the writes will be latched together in one atomic operation. We do the vblank evade by checking the scanline counter, and if it's too close to the start of vblank (too close has been hardcoded to 100usec for now), we will wait for the vblank start to pass. In order to eliminate random delayes from the rest of the system, we operate with interrupts disabled, except when waiting for the vblank obviously. Note that we now go digging through pipe_to_crtc_mapping[] in the vblank interrupt handler, which is a bit dangerous since we set up interrupts before the crtcs. However in this case since it's the vblank interrupt, we don't actually unmask it until some piece of code requests it. v2: preempt_check_resched() calls after local_irq_enable() (Jesse) Hook up the vblank irq stuff on BDW as well v3: Pass intel_crtc instead of drm_crtc (Daniel) Warn if crtc.mutex isn't locked (Daniel) Add an explicit compiler barrier and document the barriers (Daniel) Note the irq vs. modeset setup madness in the commit message (Daniel) v4: Use prepare_to_wait() & co. directly and eliminate vbl_received v5: Refactor intel_pipe_handle_vblank() vs. drm_handle_vblank() (Chris) Check for min/max scanline <= 0 (Chris) Don't call intel_pipe_update_end() if start failed totally (Chris) Check that the vblank counters match on both sides of the critical section (Chris) v6: Fix atomic update for interlaced modes v7: Reorder code for better readability (Chris) v8: Drop preempt_check_resched(). It's not available to modules anymore and isn't even needed unless we ourselves cause a wakeup needing reschedule while interrupts are off Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Sourab Gupta <sourabgupta@gmail.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-29 18:35:46 +08:00
int scanline_offset;
drm/i915: Refactor work that can sleep out of commit (v7) Once we integrate our work into the atomic pipeline, plane commit operations will need to happen with interrupts disabled, due to vblank evasion. Our commit functions today include sleepable work, so those operations need to be split out and run either before or after the atomic register programming. The solution here calculates which of those operations will need to be performed during the 'check' phase and sets flags in an intel_crtc sub-struct. New intel_begin_crtc_commit() and intel_finish_crtc_commit() functions are added before and after the actual register programming; these will eventually be called from the atomic plane helper's .atomic_begin() and .atomic_end() entrypoints. v2: Fix broken sprite code split v3: Make the pre/post commit work crtc-based to match how we eventually want this to be called from the atomic plane helpers. v4: Some platforms that haven't had their watermark code reworked were waiting for vblank, then calling update_sprite_watermarks in their platform-specific disable code. These also need to be flagged out of the critical section. v5: Sprite plane test for primary show/hide should just set the flag to wait for pending flips, not actually perform the wait. (Ander) v6: - Rebase onto latest di-nightly; picks up an important runtime PM fix. - Handle 'wait_for_flips' flag in intel_begin_crtc_commit(). (Ander) - Use wait_for_flips flag for primary plane update rather than performing the wait in the check routine. - Added kerneldoc to pre_disable/post_enable functions that are no longer static. (Ander) - Replace assert_pipe_enabled() in intel_disable_primary_hw_plane() with an intel_crtc->active test; it turns out assert_pipe_enabled() grabs some mutexes and can sleep, which we can't do with interrupts disabled. v7: - Check for fb != NULL when deciding whether the sprite plane hides the primary plane during a sprite update. (PRTS) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-24 23:59:06 +08:00
struct {
unsigned start_vbl_count;
ktime_t start_vbl_time;
int min_vbl, max_vbl;
int scanline_start;
} debug;
drm/i915: Refactor work that can sleep out of commit (v7) Once we integrate our work into the atomic pipeline, plane commit operations will need to happen with interrupts disabled, due to vblank evasion. Our commit functions today include sleepable work, so those operations need to be split out and run either before or after the atomic register programming. The solution here calculates which of those operations will need to be performed during the 'check' phase and sets flags in an intel_crtc sub-struct. New intel_begin_crtc_commit() and intel_finish_crtc_commit() functions are added before and after the actual register programming; these will eventually be called from the atomic plane helper's .atomic_begin() and .atomic_end() entrypoints. v2: Fix broken sprite code split v3: Make the pre/post commit work crtc-based to match how we eventually want this to be called from the atomic plane helpers. v4: Some platforms that haven't had their watermark code reworked were waiting for vblank, then calling update_sprite_watermarks in their platform-specific disable code. These also need to be flagged out of the critical section. v5: Sprite plane test for primary show/hide should just set the flag to wait for pending flips, not actually perform the wait. (Ander) v6: - Rebase onto latest di-nightly; picks up an important runtime PM fix. - Handle 'wait_for_flips' flag in intel_begin_crtc_commit(). (Ander) - Use wait_for_flips flag for primary plane update rather than performing the wait in the check routine. - Added kerneldoc to pre_disable/post_enable functions that are no longer static. (Ander) - Replace assert_pipe_enabled() in intel_disable_primary_hw_plane() with an intel_crtc->active test; it turns out assert_pipe_enabled() grabs some mutexes and can sleep, which we can't do with interrupts disabled. v7: - Check for fb != NULL when deciding whether the sprite plane hides the primary plane during a sprite update. (PRTS) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-24 23:59:06 +08:00
struct intel_crtc_atomic_commit atomic;
/* scalers available on this crtc */
int num_scalers;
struct vlv_wm_state wm_state;
};
struct intel_plane_wm_parameters {
uint32_t horiz_pixels;
uint32_t vert_pixels;
/*
* For packed pixel formats:
* bytes_per_pixel - holds bytes per pixel
* For planar pixel formats:
* bytes_per_pixel - holds bytes per pixel for uv-plane
* y_bytes_per_pixel - holds bytes per pixel for y-plane
*/
uint8_t bytes_per_pixel;
uint8_t y_bytes_per_pixel;
bool enabled;
bool scaled;
u64 tiling;
unsigned int rotation;
uint16_t fifo_size;
};
drm/i915: add SNB and IVB video sprite support v6 The video sprites support various video surface formats natively and can handle scaling as well. So add support for them using the new DRM core sprite support functions. v2: use drm specific fourcc header and defines v3: address Daniel's comments: - don't take struct mutex around register access (only needed for regs in the GT power well) - don't hold struct mutex across vblank waits - fix up update_plane API (pass obj instead of GTT offset) - add interlaced defines for sprite regs - drop unnecessary 'reg' variables - comment double buffered reg flushing Also fix w/h confusion when writing the scaling reg. v4: more fixes, address more comments from Daniel, and include Hai's fix - prevent divide by zero in scaling calculation (Hai Lan) - update to Ville's new DRM_FORMAT_* types - fix sprite watermark handling (calc based on CRTC size, separate from normal display wm) - remove private refcounts now that the fb cleanups handles things v5: add linear surface support v6: remove color key clearing & setting from update_plane For this version, I tested DPMS since it came up in the last review; DPMS off/on works ok when a video player is working under X, but for power saving we'll probably want to do something smarter. I'll leave that for a separate patch on top. Likewise with the refcounting/fb layer handling, which are really separate cleanups. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-12-14 05:19:38 +08:00
struct intel_plane {
struct drm_plane base;
int plane;
drm/i915: add SNB and IVB video sprite support v6 The video sprites support various video surface formats natively and can handle scaling as well. So add support for them using the new DRM core sprite support functions. v2: use drm specific fourcc header and defines v3: address Daniel's comments: - don't take struct mutex around register access (only needed for regs in the GT power well) - don't hold struct mutex across vblank waits - fix up update_plane API (pass obj instead of GTT offset) - add interlaced defines for sprite regs - drop unnecessary 'reg' variables - comment double buffered reg flushing Also fix w/h confusion when writing the scaling reg. v4: more fixes, address more comments from Daniel, and include Hai's fix - prevent divide by zero in scaling calculation (Hai Lan) - update to Ville's new DRM_FORMAT_* types - fix sprite watermark handling (calc based on CRTC size, separate from normal display wm) - remove private refcounts now that the fb cleanups handles things v5: add linear surface support v6: remove color key clearing & setting from update_plane For this version, I tested DPMS since it came up in the last review; DPMS off/on works ok when a video player is working under X, but for power saving we'll probably want to do something smarter. I'll leave that for a separate patch on top. Likewise with the refcounting/fb layer handling, which are really separate cleanups. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-12-14 05:19:38 +08:00
enum pipe pipe;
bool can_scale;
drm/i915: add SNB and IVB video sprite support v6 The video sprites support various video surface formats natively and can handle scaling as well. So add support for them using the new DRM core sprite support functions. v2: use drm specific fourcc header and defines v3: address Daniel's comments: - don't take struct mutex around register access (only needed for regs in the GT power well) - don't hold struct mutex across vblank waits - fix up update_plane API (pass obj instead of GTT offset) - add interlaced defines for sprite regs - drop unnecessary 'reg' variables - comment double buffered reg flushing Also fix w/h confusion when writing the scaling reg. v4: more fixes, address more comments from Daniel, and include Hai's fix - prevent divide by zero in scaling calculation (Hai Lan) - update to Ville's new DRM_FORMAT_* types - fix sprite watermark handling (calc based on CRTC size, separate from normal display wm) - remove private refcounts now that the fb cleanups handles things v5: add linear surface support v6: remove color key clearing & setting from update_plane For this version, I tested DPMS since it came up in the last review; DPMS off/on works ok when a video player is working under X, but for power saving we'll probably want to do something smarter. I'll leave that for a separate patch on top. Likewise with the refcounting/fb layer handling, which are really separate cleanups. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-12-14 05:19:38 +08:00
int max_downscale;
uint32_t frontbuffer_bit;
/* Since we need to change the watermarks before/after
* enabling/disabling the planes, we need to store the parameters here
* as the other pieces of the struct may not reflect the values we want
* for the watermark calculations. Currently only Haswell uses this.
*/
struct intel_plane_wm_parameters wm;
/*
* NOTE: Do not place new plane state fields here (e.g., when adding
* new plane properties). New runtime state should now be placed in
* the intel_plane_state structure and accessed via drm_plane->state.
*/
drm/i915: add SNB and IVB video sprite support v6 The video sprites support various video surface formats natively and can handle scaling as well. So add support for them using the new DRM core sprite support functions. v2: use drm specific fourcc header and defines v3: address Daniel's comments: - don't take struct mutex around register access (only needed for regs in the GT power well) - don't hold struct mutex across vblank waits - fix up update_plane API (pass obj instead of GTT offset) - add interlaced defines for sprite regs - drop unnecessary 'reg' variables - comment double buffered reg flushing Also fix w/h confusion when writing the scaling reg. v4: more fixes, address more comments from Daniel, and include Hai's fix - prevent divide by zero in scaling calculation (Hai Lan) - update to Ville's new DRM_FORMAT_* types - fix sprite watermark handling (calc based on CRTC size, separate from normal display wm) - remove private refcounts now that the fb cleanups handles things v5: add linear surface support v6: remove color key clearing & setting from update_plane For this version, I tested DPMS since it came up in the last review; DPMS off/on works ok when a video player is working under X, but for power saving we'll probably want to do something smarter. I'll leave that for a separate patch on top. Likewise with the refcounting/fb layer handling, which are really separate cleanups. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-12-14 05:19:38 +08:00
void (*update_plane)(struct drm_plane *plane,
struct drm_crtc *crtc,
drm/i915: add SNB and IVB video sprite support v6 The video sprites support various video surface formats natively and can handle scaling as well. So add support for them using the new DRM core sprite support functions. v2: use drm specific fourcc header and defines v3: address Daniel's comments: - don't take struct mutex around register access (only needed for regs in the GT power well) - don't hold struct mutex across vblank waits - fix up update_plane API (pass obj instead of GTT offset) - add interlaced defines for sprite regs - drop unnecessary 'reg' variables - comment double buffered reg flushing Also fix w/h confusion when writing the scaling reg. v4: more fixes, address more comments from Daniel, and include Hai's fix - prevent divide by zero in scaling calculation (Hai Lan) - update to Ville's new DRM_FORMAT_* types - fix sprite watermark handling (calc based on CRTC size, separate from normal display wm) - remove private refcounts now that the fb cleanups handles things v5: add linear surface support v6: remove color key clearing & setting from update_plane For this version, I tested DPMS since it came up in the last review; DPMS off/on works ok when a video player is working under X, but for power saving we'll probably want to do something smarter. I'll leave that for a separate patch on top. Likewise with the refcounting/fb layer handling, which are really separate cleanups. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-12-14 05:19:38 +08:00
struct drm_framebuffer *fb,
int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t x, uint32_t y,
uint32_t src_w, uint32_t src_h);
void (*disable_plane)(struct drm_plane *plane,
struct drm_crtc *crtc);
int (*check_plane)(struct drm_plane *plane,
struct intel_crtc_state *crtc_state,
struct intel_plane_state *state);
void (*commit_plane)(struct drm_plane *plane,
struct intel_plane_state *state);
drm/i915: add SNB and IVB video sprite support v6 The video sprites support various video surface formats natively and can handle scaling as well. So add support for them using the new DRM core sprite support functions. v2: use drm specific fourcc header and defines v3: address Daniel's comments: - don't take struct mutex around register access (only needed for regs in the GT power well) - don't hold struct mutex across vblank waits - fix up update_plane API (pass obj instead of GTT offset) - add interlaced defines for sprite regs - drop unnecessary 'reg' variables - comment double buffered reg flushing Also fix w/h confusion when writing the scaling reg. v4: more fixes, address more comments from Daniel, and include Hai's fix - prevent divide by zero in scaling calculation (Hai Lan) - update to Ville's new DRM_FORMAT_* types - fix sprite watermark handling (calc based on CRTC size, separate from normal display wm) - remove private refcounts now that the fb cleanups handles things v5: add linear surface support v6: remove color key clearing & setting from update_plane For this version, I tested DPMS since it came up in the last review; DPMS off/on works ok when a video player is working under X, but for power saving we'll probably want to do something smarter. I'll leave that for a separate patch on top. Likewise with the refcounting/fb layer handling, which are really separate cleanups. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-12-14 05:19:38 +08:00
};
struct intel_watermark_params {
unsigned long fifo_size;
unsigned long max_wm;
unsigned long default_wm;
unsigned long guard_size;
unsigned long cacheline_size;
};
struct cxsr_latency {
int is_desktop;
int is_ddr3;
unsigned long fsb_freq;
unsigned long mem_freq;
unsigned long display_sr;
unsigned long display_hpll_disable;
unsigned long cursor_sr;
unsigned long cursor_hpll_disable;
};
#define to_intel_atomic_state(x) container_of(x, struct intel_atomic_state, base)
#define to_intel_crtc(x) container_of(x, struct intel_crtc, base)
#define to_intel_crtc_state(x) container_of(x, struct intel_crtc_state, base)
#define to_intel_connector(x) container_of(x, struct intel_connector, base)
#define to_intel_encoder(x) container_of(x, struct intel_encoder, base)
#define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base)
drm/i915: add SNB and IVB video sprite support v6 The video sprites support various video surface formats natively and can handle scaling as well. So add support for them using the new DRM core sprite support functions. v2: use drm specific fourcc header and defines v3: address Daniel's comments: - don't take struct mutex around register access (only needed for regs in the GT power well) - don't hold struct mutex across vblank waits - fix up update_plane API (pass obj instead of GTT offset) - add interlaced defines for sprite regs - drop unnecessary 'reg' variables - comment double buffered reg flushing Also fix w/h confusion when writing the scaling reg. v4: more fixes, address more comments from Daniel, and include Hai's fix - prevent divide by zero in scaling calculation (Hai Lan) - update to Ville's new DRM_FORMAT_* types - fix sprite watermark handling (calc based on CRTC size, separate from normal display wm) - remove private refcounts now that the fb cleanups handles things v5: add linear surface support v6: remove color key clearing & setting from update_plane For this version, I tested DPMS since it came up in the last review; DPMS off/on works ok when a video player is working under X, but for power saving we'll probably want to do something smarter. I'll leave that for a separate patch on top. Likewise with the refcounting/fb layer handling, which are really separate cleanups. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-12-14 05:19:38 +08:00
#define to_intel_plane(x) container_of(x, struct intel_plane, base)
drm/i915: Move to atomic plane helpers (v9) Switch plane handling to use the atomic plane helpers. This means that rather than provide our own implementations of .update_plane() and .disable_plane(), we expose the lower-level check/prepare/commit/cleanup entrypoints and let the DRM core implement update/disable for us using those entrypoints. The other main change that falls out of this patch is that our drm_plane's will now always have a valid plane->state that contains the relevant plane state (initial state is allocated at plane creation). The base drm_plane_state pointed to holds the requested source/dest coordinates, and the subclassed intel_plane_state holds the adjusted values that our driver actually uses. v2: - Renamed file from intel_atomic.c to intel_atomic_plane.c (Daniel) - Fix a copy/paste comment mistake (Bob) v3: - Use prepare/cleanup functions that we've already factored out - Use newly refactored pre_commit/commit/post_commit to avoid sleeping during vblank evasion v4: - Rebase to latest di-nightly requires adding an 'old_state' parameter to atomic_update; v5: - Must have botched a rebase somewhere and lost some work. Restore state 'dirty' flag to let begin/end code know which planes to run the pre_commit/post_commit hooks for. This would have actually shown up as broken in the next commit rather than this one. v6: - Squash kerneldoc patch into this one. - Previous patches have now already taken care of most of the infrastructure that used to be in this patch. All we're adding here now is some thin wrappers. v7: - Check return of intel_plane_duplicate_state() for allocation failures. v8: - Drop unused drm_plane_state -> intel_plane_state cast. (Ander) - Squash in actual transition to plane helpers. Significant refactoring earlier in the patchset has made the combined prep+transition much easier to swallow than it was in earlier iterations. (Ander) v9: - s/track_fbs/disabled_planes/ in the atomic crtc flags. The only fb's we need to update frontbuffer tracking for are those on a plane about to be disabled (since the atomic helpers never call prepare_fb() when disabling a plane), so the new name more accurately describes what we're actually tracking. Testcase: igt/kms_plane Testcase: igt/kms_universal_plane Testcase: igt/kms_cursor_crc Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-24 02:41:52 +08:00
#define to_intel_plane_state(x) container_of(x, struct intel_plane_state, base)
#define intel_fb_obj(x) (x ? to_intel_framebuffer(x)->obj : NULL)
struct intel_hdmi {
u32 hdmi_reg;
int ddc_bus;
bool limited_color_range;
bool color_range_auto;
bool has_hdmi_sink;
bool has_audio;
enum hdmi_force_audio force_audio;
bool rgb_quant_range_selectable;
enum hdmi_picture_aspect aspect_ratio;
struct intel_connector *attached_connector;
void (*write_infoframe)(struct drm_encoder *encoder,
enum hdmi_infoframe_type type,
const void *frame, ssize_t len);
void (*set_infoframes)(struct drm_encoder *encoder,
bool enable,
const struct drm_display_mode *adjusted_mode);
bool (*infoframe_enabled)(struct drm_encoder *encoder);
};
2014-05-02 12:02:48 +08:00
struct intel_dp_mst_encoder;
#define DP_MAX_DOWNSTREAM_PORTS 0x10
/*
* enum link_m_n_set:
* When platform provides two set of M_N registers for dp, we can
* program them and switch between them incase of DRRS.
* But When only one such register is provided, we have to program the
* required divider value on that registers itself based on the DRRS state.
*
* M1_N1 : Program dp_m_n on M1_N1 registers
* dp_m2_n2 on M2_N2 registers (If supported)
*
* M2_N2 : Program dp_m2_n2 on M1_N1 registers
* M2_N2 registers are not supported
*/
enum link_m_n_set {
/* Sets the m1_n1 and m2_n2 */
M1_N1 = 0,
M2_N2
};
struct sink_crc {
bool started;
u8 last_crc[6];
int last_count;
};
struct intel_dp {
uint32_t output_reg;
uint32_t aux_ch_ctl_reg;
uint32_t DP;
int link_rate;
uint8_t lane_count;
bool has_audio;
enum hdmi_force_audio force_audio;
bool limited_color_range;
bool color_range_auto;
uint8_t dpcd[DP_RECEIVER_CAP_SIZE];
uint8_t psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE];
uint8_t downstream_ports[DP_MAX_DOWNSTREAM_PORTS];
/* sink rates as reported by DP_SUPPORTED_LINK_RATES */
uint8_t num_sink_rates;
int sink_rates[DP_MAX_SUPPORTED_RATES];
struct sink_crc sink_crc;
struct drm_dp_aux aux;
uint8_t train_set[4];
int panel_power_up_delay;
int panel_power_down_delay;
int panel_power_cycle_delay;
int backlight_on_delay;
int backlight_off_delay;
struct delayed_work panel_vdd_work;
bool want_panel_vdd;
unsigned long last_power_cycle;
unsigned long last_power_on;
unsigned long last_backlight_off;
struct notifier_block edp_notifier;
/*
* Pipe whose power sequencer is currently locked into
* this port. Only relevant on VLV/CHV.
*/
enum pipe pps_pipe;
struct edp_power_seq pps_delays;
2014-05-02 12:02:48 +08:00
bool can_mst; /* this port supports mst */
bool is_mst;
int active_mst_links;
/* connector directly attached - won't be use for modeset in mst world */
struct intel_connector *attached_connector;
2014-05-02 12:02:48 +08:00
/* mst connector list */
struct intel_dp_mst_encoder *mst_encoders[I915_MAX_PIPES];
struct drm_dp_mst_topology_mgr mst_mgr;
uint32_t (*get_aux_clock_divider)(struct intel_dp *dp, int index);
/*
* This function returns the value we have to program the AUX_CTL
* register with to kick off an AUX transaction.
*/
uint32_t (*get_aux_send_ctl)(struct intel_dp *dp,
bool has_aux_irq,
int send_bytes,
uint32_t aux_clock_divider);
bool train_set_valid;
drm/i915: Add automated testing support for Displayport compliance testing Add the skeleton framework for supporting automation for Displayport compliance testing. This patch adds the necessary framework for the source device to appropriately respond to test automation requests from a sink device. V2: - Addressed previous mailing list feedback - Fixed compilation issue (struct members declared in a later patch) - Updated debug messages to be more accurate - Added status checks for the DPCD read/write calls - Removed excess comments and debug messages - Fixed debug message compilation warnings - Fixed compilation issue with missing variables - Updated link training autotest to ACK V3: - Fixed the checks on the DPCD return code to be <= 0 rather than != 0 - Removed extraneous assignment of a NAK return code in the DPCD read failure case - Changed the return in the DPCD read failure case to a goto to the exit point where the status code is written to the sink - Removed FAUX test case since it's deprecated now - Removed the compliance flag assignment in handle_test_request V4: - Moved declaration of type_type here - Removed declaration of test_data (moved to a later patch) - Added reset to 0 for compliance test variables V5: - Moved test_active variable declaration and initialization out of this patch and into the patch where it's used - Changed variable name compliance_testing_active to compliance_test_active to unify the naming convention - Added initialization for compliance_test_type variable Signed-off-by: Todd Previte <tprevite@gmail.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-15 23:38:38 +08:00
/* Displayport compliance testing */
unsigned long compliance_test_type;
drm/i915: Implement the intel_dp_autotest_edid function for DP EDID complaince tests Updates the EDID compliance test function to perform the analyze and react to the EDID data read as a result of a hot plug event. The results of this analysis are handed off to userspace so that the userspace app can set the display mode appropriately for the test result/response. The compliance_test_active flag now appears at the end of the individual test handling functions. This is so that the kernel-side operations can be completed without the risk of interruption from the userspace app that is polling on that flag. V2: - Addressed mailing list feedback - Removed excess debug messages - Removed extraneous comments - Fixed formatting issues (line length > 80) - Updated the debug message in compute_edid_checksum to output hex values instead of decimal V3: - Addressed more list feedback - Added the test_active flag to the autotest function - Removed test_active flag from handler - Added failsafe check on the compliance test active flag at the end of the test handler - Fixed checkpatch.pl issues V4: - Removed the checksum computation function and its use as it has been rendered superfluous by changes to the core DRM EDID functions - Updated to use the raw header corruption detection mechanism - Moved the declaration of the test_data variable here V5: - Update test active flag variable name to match the change in the first patch of the series. - Relocated the test active flag declaration and initialization to this patch V6: - Updated to use the new flag for raw EDID header corruption - Removed the extra EDID read from the autotest function - Added the edid_checksum variable to struct intel_dp so that the autotest function can write it to the sink device - Moved the update to the hpd_pulse function to another patch - Removed extraneous constants V7: - Fixed erroneous placement of the checksum assignment. In some cases such as when the EDID read fails and is NULL, this causes a NULL ptr dereference in the kernel. Bad news. Fixed now. V8: - Updated to support the kfree() on the EDID data added previously V9: - Updated for the long_hpd flag propagation V10: - Updated to use actual checksum from the EDID read that occurs during normal hot plug path execution - Removed variables from intel_dp struct that are no longer needed - Updated the patch subject to more closely match the nature and contents of the patch - Fixed formatting problem (long line) V11: - Removed extra debug messages - Updated comments to be more informative - Removed extra variable V12: - Removed the 4 bit offset of the resolution setting in compliance data - Changed to DRM_DEBUG_KMS instead of DRM_DEBUG_DRIVER Signed-off-by: Todd Previte <tprevite@gmail.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 22:48:20 +08:00
unsigned long compliance_test_data;
bool compliance_test_active;
};
struct intel_digital_port {
struct intel_encoder base;
enum port port;
u32 saved_port_bits;
struct intel_dp dp;
struct intel_hdmi hdmi;
enum irqreturn (*hpd_pulse)(struct intel_digital_port *, bool);
drm/i915: Trick CL2 into life on CHV when using pipe B with port B Normmally the common lane in a PHY channel gets powered up when some of the data lanes get powered up. But when we're driving port B with pipe B we don't want to enabled any of the data lanes, and just want the DPLL in the common lane to be active. To make that happens we have to temporarily enable some data lanes after which we can access the DPLL registers in the common lane. Once the pipe is up and running we can drop the power override on the data lanes allowing them to shut down. From this point forward the common lane will in fact stay powered on until the data lanes in the other channel get powered down. Ville's extended explanation from the review thread: On Wed, Aug 19, 2015 at 07:47:41AM +0530, Deepak wrote: > One Q, why only for port B? Port C is also in same common lane right? Port B is in the first PHY channel which also houses CL1. CL1 always powers up whenever any lanes in either PHY channel are powered up. CL2 only powers up if lanes in the second channel (ie. the one with port C) powers up. So in this scenario (pipe B->port B) we want the DPLL from CL2, but ideally we only want to power up the lanes for port B. Powering up port B lanes will only power up CL1, but as we need CL2 instead we need to, temporarily, power up some lanes in port C as well. Crossing the streams the other way (pipe A->port C) is not a problem since CL1 powers up whenever anything else powers up. So powering up some port C lanes is enough on its own to make the CL1 DPLL operational, even though CL1 and the lanes live in separate channels. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> [danvet: Amend commit message with extended explanation.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-09 04:45:55 +08:00
bool release_cl2_override;
};
2014-05-02 12:02:48 +08:00
struct intel_dp_mst_encoder {
struct intel_encoder base;
enum pipe pipe;
struct intel_digital_port *primary;
void *port; /* store this opaque as its illegal to dereference it */
};
static inline enum dpio_channel
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 05:51:36 +08:00
vlv_dport_to_channel(struct intel_digital_port *dport)
{
switch (dport->port) {
case PORT_B:
case PORT_D:
return DPIO_CH0;
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 05:51:36 +08:00
case PORT_C:
return DPIO_CH1;
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 05:51:36 +08:00
default:
BUG();
}
}
static inline enum dpio_phy
vlv_dport_to_phy(struct intel_digital_port *dport)
{
switch (dport->port) {
case PORT_B:
case PORT_C:
return DPIO_PHY0;
case PORT_D:
return DPIO_PHY1;
default:
BUG();
}
}
static inline enum dpio_channel
vlv_pipe_to_channel(enum pipe pipe)
{
switch (pipe) {
case PIPE_A:
case PIPE_C:
return DPIO_CH0;
case PIPE_B:
return DPIO_CH1;
default:
BUG();
}
}
static inline struct drm_crtc *
intel_get_crtc_for_pipe(struct drm_device *dev, int pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
return dev_priv->pipe_to_crtc_mapping[pipe];
}
static inline struct drm_crtc *
intel_get_crtc_for_plane(struct drm_device *dev, int plane)
{
struct drm_i915_private *dev_priv = dev->dev_private;
return dev_priv->plane_to_crtc_mapping[plane];
}
struct intel_unpin_work {
struct work_struct work;
struct drm_crtc *crtc;
struct drm_framebuffer *old_fb;
struct drm_i915_gem_object *pending_flip_obj;
struct drm_pending_vblank_event *event;
atomic_t pending;
#define INTEL_FLIP_INACTIVE 0
#define INTEL_FLIP_PENDING 1
#define INTEL_FLIP_COMPLETE 2
drm/i915: Fix mmio vs. CS flip race on ILK+ Starting from ILK, mmio flips also cause a flip done interrupt to be signalled. This means if we first do a set_base and follow it immediately with the CS flip, we might mistake the flip done interrupt caused by the set_base as the flip done interrupt caused by the CS flip. The hardware has a flip counter which increments every time a mmio or CS flip is issued. It basically counts the number of DSPSURF register writes. This means we can sample the counter before we put the CS flip into the ring, and then when we get a flip done interrupt we can check whether the CS flip has actually performed the surface address update, or if the interrupt was caused by a previous but yet unfinished mmio flip. Even with the flip counter we still have a race condition of the CS flip base address update happens after the mmio flip done interrupt was raised but not yet processed by the driver. When the interrupt is eventually processed, the flip counter will already indicate that the CS flip has been executed, but it would not actually complete until the next start of vblank. We can use the DSPSURFLIVE register to check whether the hardware is actually scanning out of the buffer we expect, or if we managed hit this race window. This covers all the cases where the CS flip actually changes the base address. If the base address remains unchanged, we might still complete the CS flip before it has actually completed. But since the address didn't change anyway, the premature flip completion can't result in userspace overwriting data that's still being scanned out. CTG already has the flip counter and DSPSURFLIVE registers, and although the flip done interrupt is still limited to CS flips alone, the code now also checks the flip counter on CTG as well. v2: s/dspsurf/gtt_offset/ (Chris) Testcase: igt/kms_mmio_vs_cs_flip/setcrtc_vs_cs_flip Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73027 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> [danvet: Add g4x_ prefix to flip_count_after_eq.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-16 02:41:34 +08:00
u32 flip_count;
u32 gtt_offset;
struct drm_i915_gem_request *flip_queued_req;
u32 flip_queued_vblank;
u32 flip_ready_vblank;
bool enable_stall_check;
};
struct intel_load_detect_pipe {
struct drm_framebuffer *release_fb;
bool load_detect_temp;
int dpms_mode;
};
static inline struct intel_encoder *
intel_attached_encoder(struct drm_connector *connector)
{
return to_intel_connector(connector)->encoder;
}
static inline struct intel_digital_port *
enc_to_dig_port(struct drm_encoder *encoder)
{
return container_of(encoder, struct intel_digital_port, base.base);
}
2014-05-02 12:02:48 +08:00
static inline struct intel_dp_mst_encoder *
enc_to_mst(struct drm_encoder *encoder)
{
return container_of(encoder, struct intel_dp_mst_encoder, base.base);
}
static inline struct intel_dp *enc_to_intel_dp(struct drm_encoder *encoder)
{
return &enc_to_dig_port(encoder)->dp;
}
static inline struct intel_digital_port *
dp_to_dig_port(struct intel_dp *intel_dp)
{
return container_of(intel_dp, struct intel_digital_port, dp);
}
static inline struct intel_digital_port *
hdmi_to_dig_port(struct intel_hdmi *intel_hdmi)
{
return container_of(intel_hdmi, struct intel_digital_port, hdmi);
}
/*
* Returns the number of planes for this pipe, ie the number of sprites + 1
* (primary plane). This doesn't count the cursor plane then.
*/
static inline unsigned int intel_num_planes(struct intel_crtc *crtc)
{
return INTEL_INFO(crtc->base.dev)->num_sprites[crtc->pipe] + 1;
}
/* intel_fifo_underrun.c */
bool intel_set_cpu_fifo_underrun_reporting(struct drm_i915_private *dev_priv,
enum pipe pipe, bool enable);
bool intel_set_pch_fifo_underrun_reporting(struct drm_i915_private *dev_priv,
enum transcoder pch_transcoder,
bool enable);
void intel_cpu_fifo_underrun_irq_handler(struct drm_i915_private *dev_priv,
enum pipe pipe);
void intel_pch_fifo_underrun_irq_handler(struct drm_i915_private *dev_priv,
enum transcoder pch_transcoder);
void i9xx_check_fifo_underruns(struct drm_i915_private *dev_priv);
/* i915_irq.c */
void gen5_enable_gt_irq(struct drm_i915_private *dev_priv, uint32_t mask);
void gen5_disable_gt_irq(struct drm_i915_private *dev_priv, uint32_t mask);
void gen6_enable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask);
void gen6_disable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask);
void gen6_reset_rps_interrupts(struct drm_device *dev);
void gen6_enable_rps_interrupts(struct drm_device *dev);
void gen6_disable_rps_interrupts(struct drm_device *dev);
u32 gen6_sanitize_rps_pm_mask(struct drm_i915_private *dev_priv, u32 mask);
void intel_runtime_pm_disable_interrupts(struct drm_i915_private *dev_priv);
void intel_runtime_pm_enable_interrupts(struct drm_i915_private *dev_priv);
static inline bool intel_irqs_enabled(struct drm_i915_private *dev_priv)
{
/*
* We only use drm_irq_uninstall() at unload and VT switch, so
* this is the only thing we need to check.
*/
return dev_priv->pm.irqs_enabled;
}
int intel_get_crtc_scanline(struct intel_crtc *crtc);
void gen8_irq_power_well_post_enable(struct drm_i915_private *dev_priv,
unsigned int pipe_mask);
/* intel_crt.c */
void intel_crt_init(struct drm_device *dev);
/* intel_ddi.c */
void intel_prepare_ddi(struct drm_device *dev);
void hsw_fdi_link_train(struct drm_crtc *crtc);
void intel_ddi_init(struct drm_device *dev, enum port port);
enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder);
bool intel_ddi_get_hw_state(struct intel_encoder *encoder, enum pipe *pipe);
void intel_ddi_pll_init(struct drm_device *dev);
void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc);
void intel_ddi_disable_transcoder_func(struct drm_i915_private *dev_priv,
enum transcoder cpu_transcoder);
void intel_ddi_enable_pipe_clock(struct intel_crtc *intel_crtc);
void intel_ddi_disable_pipe_clock(struct intel_crtc *intel_crtc);
bool intel_ddi_pll_select(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state);
void intel_ddi_set_pipe_settings(struct drm_crtc *crtc);
void intel_ddi_prepare_link_retrain(struct drm_encoder *encoder);
bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector);
void intel_ddi_fdi_disable(struct drm_crtc *crtc);
void intel_ddi_get_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config);
struct intel_encoder *
intel_ddi_get_crtc_new_encoder(struct intel_crtc_state *crtc_state);
void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder);
2014-05-02 12:02:48 +08:00
void intel_ddi_clock_get(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config);
2014-05-02 12:02:48 +08:00
void intel_ddi_set_vc_payload_alloc(struct drm_crtc *crtc, bool state);
uint32_t ddi_signal_levels(struct intel_dp *intel_dp);
/* intel_frontbuffer.c */
drm/i915: Track frontbuffer invalidation/flushing So these are the guts of the new beast. This tracks when a frontbuffer gets invalidated (due to frontbuffer rendering) and hence should be constantly scaned out, and when it's flushed again and can be compressed/one-shot-upload. Rules for flushing are simple: The frontbuffer needs one more full upload starting from the next vblank. Which means that the flushing can _only_ be called once the frontbuffer update has been latched. But this poses a problem for pageflips: We can't just delay the flushing until the pageflip is latched, since that would pose the risk that we override frontbuffer rendering that has been scheduled in-between the pageflip ioctl and the actual latching. To handle this track asynchronous invalidations (and also pageflip) state per-ring and delay any in-between flushing until the rendering has completed. And also cancel any delayed flushing if we get a new invalidation request (whether delayed or not). Also call intel_mark_fb_busy in both cases in all cases to make sure that we keep the screen at the highest refresh rate both on flips, synchronous plane updates and for frontbuffer rendering. v2: Lots of improvements Suggestions from Chris: - Move invalidate/flush in flush_*_domain and set_to_*_domain. - Drop the flush in busy_ioctl since it's redundant. Was a leftover from an earlier concept to track flips/delayed flushes. - Don't forget about the initial modeset enable/final disable. Suggested by Chris. Track flips accurately, too. Since flips complete independently of rendering we need to track pending flips in a separate mask. Again if an invalidate happens we need to cancel the evenutal flush to avoid races. v3: Provide correct header declarations for flip functions. Currently not needed outside of intel_display.c, but part of the proper interface. v4: Add proper domain management to fbcon so that the fbcon buffer is also tracked correctly. v5: Fixup locking around the fbcon set_to_gtt_domain call. v6: More comments from Chris: - Split out fbcon changes. - Drop superflous checks for potential scanout before calling intel_fb functions - we can micro-optimize this later. - s/intel_fb_/intel_fb_obj_/ to make it clear that this deals in gem object. We already have precedence for fb_obj in the pin_and_fence functions. v7: Clarify the semantics of the flip flush handling by renaming things a bit: - Don't go through a gem object but take the relevant frontbuffer bits directly. These functions center on the plane, the actual object is irrelevant - even a flip to the same object as already active should cause a flush. - Add a new intel_frontbuffer_flip for synchronous plane updates. It currently just calls intel_frontbuffer_flush since the implemenation differs. This way we achieve a clear split between one-shot update events on one side and frontbuffer rendering with potentially a very long delay between the invalidate and flush. Chris and I also had some discussions about mark_busy and whether it is appropriate to call from flush. But mark busy is a state which should be derived from the 3 events (invalidate, flush, flip) we now have by the users, like psr does by tracking relevant information in psr.busy_frontbuffer_bits. DRRS (the only real use of mark_busy for frontbuffer) needs to have similar logic. With that the overall mark_busy in the core could be removed. v8: Only when retiring gpu buffers only flush frontbuffer bits we actually invalidated in a batch. Just for safety since before any additional usage/invalidate we should always retire current rendering. Suggested by Chris Wilson. v9: Actually use intel_frontbuffer_flip in all appropriate places. Spotted by Chris. v10: Address more comments from Chris: - Don't call _flip in set_base when the crtc is inactive, avoids redunancy in the modeset case with the initial enabling of all planes. - Add comments explaining that the initial/final plane enable/disable still has work left to do before it's fully generic. v11: Only invalidate for gtt/cpu access when writing. Spotted by Chris. v12: s/_flush/_flip/ in intel_overlay.c per Chris' comment. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-19 22:01:59 +08:00
void intel_fb_obj_invalidate(struct drm_i915_gem_object *obj,
enum fb_op_origin origin);
drm/i915: Track frontbuffer invalidation/flushing So these are the guts of the new beast. This tracks when a frontbuffer gets invalidated (due to frontbuffer rendering) and hence should be constantly scaned out, and when it's flushed again and can be compressed/one-shot-upload. Rules for flushing are simple: The frontbuffer needs one more full upload starting from the next vblank. Which means that the flushing can _only_ be called once the frontbuffer update has been latched. But this poses a problem for pageflips: We can't just delay the flushing until the pageflip is latched, since that would pose the risk that we override frontbuffer rendering that has been scheduled in-between the pageflip ioctl and the actual latching. To handle this track asynchronous invalidations (and also pageflip) state per-ring and delay any in-between flushing until the rendering has completed. And also cancel any delayed flushing if we get a new invalidation request (whether delayed or not). Also call intel_mark_fb_busy in both cases in all cases to make sure that we keep the screen at the highest refresh rate both on flips, synchronous plane updates and for frontbuffer rendering. v2: Lots of improvements Suggestions from Chris: - Move invalidate/flush in flush_*_domain and set_to_*_domain. - Drop the flush in busy_ioctl since it's redundant. Was a leftover from an earlier concept to track flips/delayed flushes. - Don't forget about the initial modeset enable/final disable. Suggested by Chris. Track flips accurately, too. Since flips complete independently of rendering we need to track pending flips in a separate mask. Again if an invalidate happens we need to cancel the evenutal flush to avoid races. v3: Provide correct header declarations for flip functions. Currently not needed outside of intel_display.c, but part of the proper interface. v4: Add proper domain management to fbcon so that the fbcon buffer is also tracked correctly. v5: Fixup locking around the fbcon set_to_gtt_domain call. v6: More comments from Chris: - Split out fbcon changes. - Drop superflous checks for potential scanout before calling intel_fb functions - we can micro-optimize this later. - s/intel_fb_/intel_fb_obj_/ to make it clear that this deals in gem object. We already have precedence for fb_obj in the pin_and_fence functions. v7: Clarify the semantics of the flip flush handling by renaming things a bit: - Don't go through a gem object but take the relevant frontbuffer bits directly. These functions center on the plane, the actual object is irrelevant - even a flip to the same object as already active should cause a flush. - Add a new intel_frontbuffer_flip for synchronous plane updates. It currently just calls intel_frontbuffer_flush since the implemenation differs. This way we achieve a clear split between one-shot update events on one side and frontbuffer rendering with potentially a very long delay between the invalidate and flush. Chris and I also had some discussions about mark_busy and whether it is appropriate to call from flush. But mark busy is a state which should be derived from the 3 events (invalidate, flush, flip) we now have by the users, like psr does by tracking relevant information in psr.busy_frontbuffer_bits. DRRS (the only real use of mark_busy for frontbuffer) needs to have similar logic. With that the overall mark_busy in the core could be removed. v8: Only when retiring gpu buffers only flush frontbuffer bits we actually invalidated in a batch. Just for safety since before any additional usage/invalidate we should always retire current rendering. Suggested by Chris Wilson. v9: Actually use intel_frontbuffer_flip in all appropriate places. Spotted by Chris. v10: Address more comments from Chris: - Don't call _flip in set_base when the crtc is inactive, avoids redunancy in the modeset case with the initial enabling of all planes. - Add comments explaining that the initial/final plane enable/disable still has work left to do before it's fully generic. v11: Only invalidate for gtt/cpu access when writing. Spotted by Chris. v12: s/_flush/_flip/ in intel_overlay.c per Chris' comment. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-19 22:01:59 +08:00
void intel_frontbuffer_flip_prepare(struct drm_device *dev,
unsigned frontbuffer_bits);
void intel_frontbuffer_flip_complete(struct drm_device *dev,
unsigned frontbuffer_bits);
void intel_frontbuffer_flip(struct drm_device *dev,
unsigned frontbuffer_bits);
unsigned int intel_fb_align_height(struct drm_device *dev,
unsigned int height,
uint32_t pixel_format,
uint64_t fb_format_modifier);
void intel_fb_obj_flush(struct drm_i915_gem_object *obj, bool retire,
enum fb_op_origin origin);
u32 intel_fb_stride_alignment(struct drm_device *dev, uint64_t fb_modifier,
uint32_t pixel_format);
/* intel_audio.c */
void intel_init_audio(struct drm_device *dev);
void intel_audio_codec_enable(struct intel_encoder *encoder);
void intel_audio_codec_disable(struct intel_encoder *encoder);
void i915_audio_component_init(struct drm_i915_private *dev_priv);
void i915_audio_component_cleanup(struct drm_i915_private *dev_priv);
/* intel_display.c */
extern const struct drm_plane_funcs intel_plane_funcs;
bool intel_has_pending_fb_unpin(struct drm_device *dev);
int intel_pch_rawclk(struct drm_device *dev);
int intel_hrawclk(struct drm_device *dev);
void intel_mark_busy(struct drm_device *dev);
void intel_mark_idle(struct drm_device *dev);
void intel_crtc_restore_mode(struct drm_crtc *crtc);
int intel_display_suspend(struct drm_device *dev);
void intel_encoder_destroy(struct drm_encoder *encoder);
int intel_connector_init(struct intel_connector *);
struct intel_connector *intel_connector_alloc(void);
bool intel_connector_get_hw_state(struct intel_connector *connector);
void intel_connector_attach_encoder(struct intel_connector *connector,
struct intel_encoder *encoder);
struct drm_encoder *intel_best_encoder(struct drm_connector *connector);
struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
struct drm_crtc *crtc);
enum pipe intel_get_pipe_from_connector(struct intel_connector *connector);
int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
struct drm_file *file_priv);
enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
enum pipe pipe);
bool intel_pipe_has_type(struct intel_crtc *crtc, enum intel_output_type type);
static inline void
intel_wait_for_vblank(struct drm_device *dev, int pipe)
{
drm_wait_one_vblank(dev, pipe);
}
int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp);
void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
struct intel_digital_port *dport,
unsigned int expected_mask);
bool intel_get_load_detect_pipe(struct drm_connector *connector,
struct drm_display_mode *mode,
struct intel_load_detect_pipe *old,
struct drm_modeset_acquire_ctx *ctx);
void intel_release_load_detect_pipe(struct drm_connector *connector,
struct intel_load_detect_pipe *old,
struct drm_modeset_acquire_ctx *ctx);
int intel_pin_and_fence_fb_obj(struct drm_plane *plane,
struct drm_framebuffer *fb,
const struct drm_plane_state *plane_state);
struct drm_framebuffer *
__intel_framebuffer_create(struct drm_device *dev,
struct drm_mode_fb_cmd2 *mode_cmd,
struct drm_i915_gem_object *obj);
void intel_prepare_page_flip(struct drm_device *dev, int plane);
void intel_finish_page_flip(struct drm_device *dev, int pipe);
void intel_finish_page_flip_plane(struct drm_device *dev, int plane);
drm/i915: Check for a stalled page flip after each vblank Long ago, back in the racy haydays of 915gm interrupt handling, page flips would occasionally go astray and leave the hardware stuck, and the display not updating. This annoyed people who relied on their systems being able to display continuously updating information 24/7, and so some code to detect when the driver missed the page flip completion signal was added. Until recently, it was presumed that the interrupt handling was now flawless, but once again Simon Farnsworth has found a system whose display will stall. Reinstate the pageflip stall detection, which works by checking to see if the hardware has been updated to the new framebuffer address following each vblank. If the hardware is scanning out from the new framebuffer, but we still think the flip is pending, then we kick our driver into submision. This is a continuation of the effort started with commit 4e5359cd053bfb7d8dabe4a63624a5726848ffbc Author: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Date: Wed Sep 1 17:47:52 2010 +0100 drm/i915: Avoid pageflipping freeze when we miss the flip prepare interrupt This now includes a belt-and-braces approach to make sure the driver (or the hardware) doesn't miss an interrupt and cause us to stop updating the display should the unthinkable happen and the pageflip fail - i.e. that the user is able to continue submitting flips. v2: Cleanup, refactor, and rename v3: Only start counting vblanks after the flip command has been seen by the hardware. v4: Record the seqno after we touch the ring, or else there may be no seqno allocated yet. v5: Rebase on mmio-flip. v6: Rebase, rebase. Reported-by: Simon Farnsworth <simon@farnz.org.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75502 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [v4] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-05 14:13:24 +08:00
void intel_check_page_flip(struct drm_device *dev, int pipe);
int intel_prepare_plane_fb(struct drm_plane *plane,
const struct drm_plane_state *new_state);
void intel_cleanup_plane_fb(struct drm_plane *plane,
const struct drm_plane_state *old_state);
int intel_plane_atomic_get_property(struct drm_plane *plane,
const struct drm_plane_state *state,
struct drm_property *property,
uint64_t *val);
int intel_plane_atomic_set_property(struct drm_plane *plane,
struct drm_plane_state *state,
struct drm_property *property,
uint64_t val);
int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
struct drm_plane_state *plane_state);
drm/i915/skl: Support secondary (rotated) frame buffer mapping 90/270 rotated scanout needs a rotated GTT view of the framebuffer. This is put in a separate VMA with a dedicated ggtt view and wired such that it is created when a framebuffer is pinned to a 90/270 rotated plane. Rotation is only possible with Yb/Yf buffers and error is propagated to user space in case of a mismatch. Special rotated page view is constructed at the VMA creation time by borrowing the DMA addresses from obj->pages. v2: * Do not bother with pages for rotated sg list, just populate the DMA addresses. (Daniel Vetter) * Checkpatch cleanup. v3: * Rebased on top of new plane handling (create rotated mapping when setting the rotation property). * Unpin rotated VMA on unpinning from display plane. * Simplify rotation check using bitwise AND. (Chris Wilson) v4: * Fix unpinning of optional rotated mapping so it is really considered to be optional. v5: * Rebased for fb modifier changes. * Rebased for atomic commit. * Only pin needed view for display. (Ville Syrjälä, Daniel Vetter) v6: * Rebased after preparatory work has been extracted out. (Daniel Vetter) v7: * Slightly simplified tiling geometry calculation. * Moved rotated GGTT view implementation into i915_gem_gtt.c (Daniel Vetter) v8: * Do not use i915_gem_obj_size to get object size since that actually returns the size of an VMA which may not exist. * Rebased for ggtt view changes. v9: * Rebased after code review changes on the preceding patches. * Tidy function definitions. (Joonas Lahtinen) For: VIZ-4726 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v4) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-23 19:10:36 +08:00
unsigned int
intel_tile_height(struct drm_device *dev, uint32_t pixel_format,
uint64_t fb_format_modifier, unsigned int plane);
drm/i915/skl: Support secondary (rotated) frame buffer mapping 90/270 rotated scanout needs a rotated GTT view of the framebuffer. This is put in a separate VMA with a dedicated ggtt view and wired such that it is created when a framebuffer is pinned to a 90/270 rotated plane. Rotation is only possible with Yb/Yf buffers and error is propagated to user space in case of a mismatch. Special rotated page view is constructed at the VMA creation time by borrowing the DMA addresses from obj->pages. v2: * Do not bother with pages for rotated sg list, just populate the DMA addresses. (Daniel Vetter) * Checkpatch cleanup. v3: * Rebased on top of new plane handling (create rotated mapping when setting the rotation property). * Unpin rotated VMA on unpinning from display plane. * Simplify rotation check using bitwise AND. (Chris Wilson) v4: * Fix unpinning of optional rotated mapping so it is really considered to be optional. v5: * Rebased for fb modifier changes. * Rebased for atomic commit. * Only pin needed view for display. (Ville Syrjälä, Daniel Vetter) v6: * Rebased after preparatory work has been extracted out. (Daniel Vetter) v7: * Slightly simplified tiling geometry calculation. * Moved rotated GGTT view implementation into i915_gem_gtt.c (Daniel Vetter) v8: * Do not use i915_gem_obj_size to get object size since that actually returns the size of an VMA which may not exist. * Rebased for ggtt view changes. v9: * Rebased after code review changes on the preceding patches. * Tidy function definitions. (Joonas Lahtinen) For: VIZ-4726 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v4) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-23 19:10:36 +08:00
static inline bool
intel_rotation_90_or_270(unsigned int rotation)
{
return rotation & (BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_270));
}
void intel_create_rotation_property(struct drm_device *dev,
struct intel_plane *plane);
/* shared dpll functions */
struct intel_shared_dpll *intel_crtc_to_shared_dpll(struct intel_crtc *crtc);
void assert_shared_dpll(struct drm_i915_private *dev_priv,
struct intel_shared_dpll *pll,
bool state);
#define assert_shared_dpll_enabled(d, p) assert_shared_dpll(d, p, true)
#define assert_shared_dpll_disabled(d, p) assert_shared_dpll(d, p, false)
struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc,
struct intel_crtc_state *state);
void vlv_force_pll_on(struct drm_device *dev, enum pipe pipe,
const struct dpll *dpll);
void vlv_force_pll_off(struct drm_device *dev, enum pipe pipe);
/* modesetting asserts */
void assert_panel_unlocked(struct drm_i915_private *dev_priv,
enum pipe pipe);
void assert_pll(struct drm_i915_private *dev_priv,
enum pipe pipe, bool state);
#define assert_pll_enabled(d, p) assert_pll(d, p, true)
#define assert_pll_disabled(d, p) assert_pll(d, p, false)
void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
enum pipe pipe, bool state);
#define assert_fdi_rx_pll_enabled(d, p) assert_fdi_rx_pll(d, p, true)
#define assert_fdi_rx_pll_disabled(d, p) assert_fdi_rx_pll(d, p, false)
void assert_pipe(struct drm_i915_private *dev_priv, enum pipe pipe, bool state);
drm/i915: add SNB and IVB video sprite support v6 The video sprites support various video surface formats natively and can handle scaling as well. So add support for them using the new DRM core sprite support functions. v2: use drm specific fourcc header and defines v3: address Daniel's comments: - don't take struct mutex around register access (only needed for regs in the GT power well) - don't hold struct mutex across vblank waits - fix up update_plane API (pass obj instead of GTT offset) - add interlaced defines for sprite regs - drop unnecessary 'reg' variables - comment double buffered reg flushing Also fix w/h confusion when writing the scaling reg. v4: more fixes, address more comments from Daniel, and include Hai's fix - prevent divide by zero in scaling calculation (Hai Lan) - update to Ville's new DRM_FORMAT_* types - fix sprite watermark handling (calc based on CRTC size, separate from normal display wm) - remove private refcounts now that the fb cleanups handles things v5: add linear surface support v6: remove color key clearing & setting from update_plane For this version, I tested DPMS since it came up in the last review; DPMS off/on works ok when a video player is working under X, but for power saving we'll probably want to do something smarter. I'll leave that for a separate patch on top. Likewise with the refcounting/fb layer handling, which are really separate cleanups. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-12-14 05:19:38 +08:00
#define assert_pipe_enabled(d, p) assert_pipe(d, p, true)
#define assert_pipe_disabled(d, p) assert_pipe(d, p, false)
unsigned long intel_gen4_compute_page_offset(struct drm_i915_private *dev_priv,
int *x, int *y,
unsigned int tiling_mode,
unsigned int bpp,
unsigned int pitch);
void intel_prepare_reset(struct drm_device *dev);
void intel_finish_reset(struct drm_device *dev);
void hsw_enable_pc8(struct drm_i915_private *dev_priv);
void hsw_disable_pc8(struct drm_i915_private *dev_priv);
drm/i915/bxt: add display initialize/uninitialize sequence (CDCLK) Add CDCLK specific display clock initialization sequence as per BSpec. Note that the CDCLK initialization/uninitialization are done at their current place only for simplicity, in a future patch - when more of the runtime PM features will be enabled - these will be moved to power well#1 and modeset encoder enabling/disabling hooks respectively. This also means that atm dynamic power gating power well #1 is effectively disabled. The call to uninitialize CDCLK during system/runtime suspend will be added later in this patchset. v1: Added function definitions in header files v2: Imre's review comments addressed - Moved CDCLK related definitions to i915_reg.h - Removed defintions for CDCLK frequency - Split uninit_cdclk() by adding a phy_uninit function - Calculate freq and decimal based on input frequency - Program SSA precharge based on input frequency - Use wait_for 1ms instead 200us udelay for DE PLL locking - Removed initial value for divider, freq, decimal, ratio. - Replaced polling loops with wait_for - Parameterized latency optim setting - Fix the parts where DE PLL has to be disabled. - Call CDCLK selection from mode set v3: (imre) - add note about the plan to move the cdclk/phy init to a better place - take rps.hw_lock around pcode access - move DE PLL register macros here from another patch since they are used here first - add BXT_ prefix to CDCLK flags - add missing masking when programming CDCLK_FREQ_DECIMAL v4: (ville) - split the CDCLK/PHY parts into two patches, update commit message accordingly - s/DISPLAY_PCU_CONTROL/HSW_PCODE_DE_WRITE_FREQ_REQ/ - simplify BXT_DE_PLL_RATIO macros - fix BXT_DE_PLL_RATIO_MASK - s/bxt_select_cdclk_freq/broxton_set_cdclk_freq/ - move cdclk init/uninit/set code from intel_ddi.c to intel_display.c - remove redundant code comments for broxton_set_cdclk_freq() - sanitize fixed point<->integer frequency value conversion - use DRM_ERROR instead of WARN - do RMW when programming BXT_DE_PLL_CTL for safety - add note about PLL lock timeout being exactly 200us - make PCU error messages more descriptive - instead of using 0 freq to mean PLL off/bypass freq use 19200 for clarity, as the latter one is the actual rate - simplify pcode programming, removing duplicated sandybridge_pcode_write() call - sanitize code flow, remove unnecessary scratch vars in broxton_set_cdclk() (imre) - Remove bound check for maxmimum freq to match current code. This check will be added later at a more proper platform independent place once atomic support lands. - add note to remove freq guard band which isn't needed on BXT - add note to reduce freq to minimum if no pipe is enabled - combine broxton_modeset_global_pipes() with valleyview_modeset_global_pipes() Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> (v2) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-24 16:07:39 +08:00
void broxton_init_cdclk(struct drm_device *dev);
void broxton_uninit_cdclk(struct drm_device *dev);
drm/i915/bxt: add display initialize/uninitialize sequence (PHY) Add PHY specific display initialization sequence as per BSpec. Note that the PHY initialization/uninitialization are done at their current place only for simplicity, in a future patch - when more of the runtime PM features will be enabled - these will be moved to power well#1 and modeset encoder enabling/disabling hooks respectively. The call to uninitialize the PHY during system/runtime suspend will be added later in this patchset. v1: Added function definitions in header files v2: Imre's review comments addressed - Moved CDCLK related definitions to i915_reg.h - Removed defintions for CDCLK frequency - Split uninit_cdclk() by adding a phy_uninit function - Calculate freq and decimal based on input frequency - Program SSA precharge based on input frequency - Use wait_for 1ms instead 200us udelay for DE PLL locking - Removed initial value for divider, freq, decimal, ratio. - Replaced polling loops with wait_for - Parameterized latency optim setting - Fix the parts where DE PLL has to be disabled. - Call CDCLK selection from mode set v3: (imre) - add note about the plan to move the cdclk/phy init to a better place - take rps.hw_lock around pcode access - fix DDI PHY timeout value - squash in Vandana's "PORT_CL2CM_DW6_A BUN fix", "DDI PHY programming register defn", "Do ddi_phy_init always", - move PHY register macros next to the corresponding CHV/VLV macros - move DE PLL register macros here from another patch since they are used here first - add BXT_ prefix to CDCLK flags - s/COMMON_RESET/COMMON_RESET_DIS/ and clarify related code comments - fix incorrect read value for the RMW of BXT_PHY_CTL_FAMILY_DDI - fix using GT_DISPLAY_EDP_POWER_ON vs. GT_DISPLAY_DDI_POWER_ON when powering on DDI ports - fix incorrect port when setting BXT_PORT_TX_DW14_LN for DDI ports - add missing masking when programming CDCLK_FREQ_DECIMAL - add missing powering on for DDI-C port, rename OCL2_LDOFUSE_PWR_EN to OCL2_LDOFUSE_PWR_DIS to reduce confusion - add note about mismatch with bspec in the PORT_REF_DW6 fields - factor out PHY init code to a new function, so we can call it for PHY1 and PHY0, instead of open-coding the same v4: (ville) - split the CDCLK/PHY parts into two patches, update commit message accordingly - use the existing dpio_phy enum instead of adding a new one for the same purpose - flip the meaning of PHYs so that PHY_A is PHY1 and PHY_BC is PHY0 to better match CHV - s/BXT_PHY/_BXT_PHY/ - use _PIPE for _BXT_PHY instead of open-coding it - drop _0_2_0_GTTMMADR suffix from BXT_P_CR_GT_DISP_PWRON - define GT_DISPLAY_POWER_ON in a more standard way - make a note that the CHV ConfigDB also disagrees about GRC_CODE field definitions - fix lane optimization refactoring fumble from v3 - add per PHY uninit functions to match the init counterparts Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> (v2) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-24 16:07:39 +08:00
void broxton_ddi_phy_init(struct drm_device *dev);
void broxton_ddi_phy_uninit(struct drm_device *dev);
void bxt_enable_dc9(struct drm_i915_private *dev_priv);
void bxt_disable_dc9(struct drm_i915_private *dev_priv);
drm/i915/skl: Deinit/init the display at suspend/resume We need to re-init the display hardware when going out of suspend. This includes: - Hooking the PCH to the reset logic - Restoring CDCDLK - Enabling the DDB power Among those, only the CDCDLK one is a bit tricky. There's some complexity in that: - DPLL0 (which is the source for CDCLK) has two VCOs, each with a set of supported frequencies. As eDP also uses DPLL0 for its link rate, once DPLL0 is on, we restrict the possible eDP link rates the chosen VCO. - CDCLK also limits the bandwidth available to push pixels. So, as a first step, this commit restore what the BIOS set, until I can do more testing. In case that's of interest for the reviewer, I've unit tested the function that derives the decimal frequency field: #include <stdio.h> #include <stdint.h> #include <assert.h> #define ARRAY_SIZE(x) (sizeof(x) / sizeof(*(x))) static const struct dpll_freq { unsigned int freq; unsigned int decimal; } freqs[] = { { .freq = 308570, .decimal = 0b01001100111}, { .freq = 337500, .decimal = 0b01010100001}, { .freq = 432000, .decimal = 0b01101011110}, { .freq = 450000, .decimal = 0b01110000010}, { .freq = 540000, .decimal = 0b10000110110}, { .freq = 617140, .decimal = 0b10011010000}, { .freq = 675000, .decimal = 0b10101000100}, }; static void intbits(unsigned int v) { int i; for(i = 10; i >= 0; i--) putchar('0' + ((v >> i) & 1)); } static unsigned int freq_decimal(unsigned int freq /* in kHz */) { return (freq - 1000) / 500; } static void test_freq(const struct dpll_freq *entry) { unsigned int decimal = freq_decimal(entry->freq); printf("freq: %d, expected: ", entry->freq); intbits(entry->decimal); printf(", got: "); intbits(decimal); putchar('\n'); assert(decimal == entry->decimal); } int main(int argc, char **argv) { int i; for (i = 0; i < ARRAY_SIZE(freqs); i++) test_freq(&freqs[i]); return 0; } v2: - Rebase on top of -nightly - Use (freq - 1000) / 500 for the decimal frequency (Ville) - Fix setting the enable bit of HSW_NDE_RSTWRN_OPT (Ville) - Rename skl_display_{resume,suspend} to skl_{init,uninit}_cdclk to be consistent with the BXT code (Ville) - Store boot CDCLK in ddi_pll_init (Ville) - Merge dev_priv's skl_boot_cdclk into cdclk_freq - Use LCPLL_PLL_LOCK instead of (1 << 30) (Ville) - Replace various '0' by SKL_DPLL0 to be a bit more explicit that we're programming DPLL0 - Busy poll the PCU before doing the frequency change. It takes about 3/4 cycles, each separated by 10us, to get the ACK from the CPU (Ville) v3: - Restore dev_priv->skl_boot_cdclk, leaving unification with dev_priv->cdclk_freq for a later patch (Daniel, Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-21 23:37:48 +08:00
void skl_init_cdclk(struct drm_i915_private *dev_priv);
int skl_sanitize_cdclk(struct drm_i915_private *dev_priv);
drm/i915/skl: Deinit/init the display at suspend/resume We need to re-init the display hardware when going out of suspend. This includes: - Hooking the PCH to the reset logic - Restoring CDCDLK - Enabling the DDB power Among those, only the CDCDLK one is a bit tricky. There's some complexity in that: - DPLL0 (which is the source for CDCLK) has two VCOs, each with a set of supported frequencies. As eDP also uses DPLL0 for its link rate, once DPLL0 is on, we restrict the possible eDP link rates the chosen VCO. - CDCLK also limits the bandwidth available to push pixels. So, as a first step, this commit restore what the BIOS set, until I can do more testing. In case that's of interest for the reviewer, I've unit tested the function that derives the decimal frequency field: #include <stdio.h> #include <stdint.h> #include <assert.h> #define ARRAY_SIZE(x) (sizeof(x) / sizeof(*(x))) static const struct dpll_freq { unsigned int freq; unsigned int decimal; } freqs[] = { { .freq = 308570, .decimal = 0b01001100111}, { .freq = 337500, .decimal = 0b01010100001}, { .freq = 432000, .decimal = 0b01101011110}, { .freq = 450000, .decimal = 0b01110000010}, { .freq = 540000, .decimal = 0b10000110110}, { .freq = 617140, .decimal = 0b10011010000}, { .freq = 675000, .decimal = 0b10101000100}, }; static void intbits(unsigned int v) { int i; for(i = 10; i >= 0; i--) putchar('0' + ((v >> i) & 1)); } static unsigned int freq_decimal(unsigned int freq /* in kHz */) { return (freq - 1000) / 500; } static void test_freq(const struct dpll_freq *entry) { unsigned int decimal = freq_decimal(entry->freq); printf("freq: %d, expected: ", entry->freq); intbits(entry->decimal); printf(", got: "); intbits(decimal); putchar('\n'); assert(decimal == entry->decimal); } int main(int argc, char **argv) { int i; for (i = 0; i < ARRAY_SIZE(freqs); i++) test_freq(&freqs[i]); return 0; } v2: - Rebase on top of -nightly - Use (freq - 1000) / 500 for the decimal frequency (Ville) - Fix setting the enable bit of HSW_NDE_RSTWRN_OPT (Ville) - Rename skl_display_{resume,suspend} to skl_{init,uninit}_cdclk to be consistent with the BXT code (Ville) - Store boot CDCLK in ddi_pll_init (Ville) - Merge dev_priv's skl_boot_cdclk into cdclk_freq - Use LCPLL_PLL_LOCK instead of (1 << 30) (Ville) - Replace various '0' by SKL_DPLL0 to be a bit more explicit that we're programming DPLL0 - Busy poll the PCU before doing the frequency change. It takes about 3/4 cycles, each separated by 10us, to get the ACK from the CPU (Ville) v3: - Restore dev_priv->skl_boot_cdclk, leaving unification with dev_priv->cdclk_freq for a later patch (Daniel, Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-21 23:37:48 +08:00
void skl_uninit_cdclk(struct drm_i915_private *dev_priv);
2015-09-29 13:31:59 +08:00
void skl_enable_dc6(struct drm_i915_private *dev_priv);
void skl_disable_dc6(struct drm_i915_private *dev_priv);
void intel_dp_get_m_n(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config);
void intel_dp_set_m_n(struct intel_crtc *crtc, enum link_m_n_set m_n);
int intel_dotclock_calculate(int link_freq, const struct intel_link_m_n *m_n);
void
ironlake_check_encoder_dotclock(const struct intel_crtc_state *pipe_config,
int dotclock);
bool bxt_find_best_dpll(struct intel_crtc_state *crtc_state, int target_clock,
intel_clock_t *best_clock);
int chv_calc_dpll_params(int refclk, intel_clock_t *pll_clock);
bool intel_crtc_active(struct drm_crtc *crtc);
void hsw_enable_ips(struct intel_crtc *crtc);
void hsw_disable_ips(struct intel_crtc *crtc);
enum intel_display_power_domain
intel_display_port_power_domain(struct intel_encoder *intel_encoder);
void intel_mode_from_pipe_config(struct drm_display_mode *mode,
struct intel_crtc_state *pipe_config);
void intel_modeset_preclose(struct drm_device *dev, struct drm_file *file);
int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state);
int skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state);
unsigned long intel_plane_obj_offset(struct intel_plane *intel_plane,
struct drm_i915_gem_object *obj,
unsigned int plane);
u32 skl_plane_ctl_format(uint32_t pixel_format);
u32 skl_plane_ctl_tiling(uint64_t fb_modifier);
u32 skl_plane_ctl_rotation(unsigned int rotation);
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
/* intel_csr.c */
void intel_csr_ucode_init(struct drm_device *dev);
drm/i915/skl: Add DC5 Trigger Sequence Add triggers as per expectations mentioned in gen9_enable_dc5 and gen9_disable_dc5 patch. Also call POSTING_READ for every write to a register to ensure that its written immediately. v1: Remove POSTING_READ calls as they've already been added in previous patches. v2: Rebase to move all runtime pm specific changes to intel_runtime_pm.c file. Modified as per review comments from Imre: 1] Change variable name 'dc5_allowed' to 'dc5_enabled' to correspond to relevant functions. 2] Move the check dc5_enabled in skl_set_power_well() to disable DC5 into gen9_disable_DC5 which is a more appropriate place. 3] Convert checks for 'pm.dc5_enabled' and 'pm.suspended' in skl_set_power_well() to warnings. However, removing them for now as they'll be included in a future patch asserting DC-state entry/exit criteria. 4] Enable DC5, only when CSR firmware is verified to be loaded. Create new structure to track 'enabled' and 'deferred' status of DC5. 5] Ensure runtime PM reference is obtained, if CSR is not loaded, to avoid entering runtime-suspend and release it when it's loaded. 6] Protect necessary CSR-related code with locks. 7] Move CSR-loading call to runtime PM initialization, as power domains needed to be accessed during deferred DC5-enabling, are not initialized earlier. v3: Rebase to latest. Modified as per review comments from Imre: 1] Use blocking wait for CSR-loading to finish to enable DC5 for simplicity, instead of deferring enabling DC5 until CSR is loaded. 2] Obtain runtime PM reference during CSR-loading initialization itself as deferred DC5- enabling is removed and release it at the end of CSR-loading functionality. 3] Revert calling CSR-loading functionality to the beginning of i915 driver-load functionality to avoid any delay in loading. 4] Define another variable to track whether CSR-loading failed and use it to avoid enabling DC5 if it's true. 5] Define CSR-load-status accessor functions for use later. v4: 1] Disable DC5 before enabling PG2 instead of after it. 2] DC5 was being mistaken enabled even when CSR-loading timed-out. Fix that. 3] Enable DC5-related functionality using a macro. 4] Remove dc5_enabled tracking variable and its use as it's not needed now. v5: 1] Mark CSR failed to load where necessary in finish_csr_load function. 2] Use mutex-protected accessor function to check if CSR loaded instead of directly accessing the variable. 3] Prefix csr_load_status_get/set function names with intel_. v6: rebase to latest. v7: Rebase on top of nightly (Damien) v8: Squashed the patch from Imre - added csr helper pointers to simplify the code. (Imre) v9: After adding dmc ver 1.0 support rebased on top of nightly. (Animesh) v10: Added a enum for different csr states, suggested by Imre. (Animesh) v11: Based on review comments from Imre, Damien and Daniel following changes done - enum name chnaged to csr_state (singular form). - FW_UNINITIALIZED used as zeroth element in enum csr_state. - Prototype changed for helper function(set/get csr status), using enum csr_state instead of bool. v12: Based on review comment from Imre, introduced bool fw_loaded local to finish_csr_load() which helps calling once to set the csr status. The same flag used to fail RPM if find any issue during firmware loading. Issue: VIZ-2819 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Suketu Shah <suketu.j.shah@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-17 22:16:16 +08:00
enum csr_state intel_csr_load_status_get(struct drm_i915_private *dev_priv);
void intel_csr_load_status_set(struct drm_i915_private *dev_priv,
enum csr_state state);
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
void intel_csr_load_program(struct drm_device *dev);
void intel_csr_ucode_fini(struct drm_device *dev);
drm/i915/skl: Assert the requirements to enter or exit DC5. Warn if the conditions to enter or exit DC5 are not satisfied such as support for runtime PM, state of power well, CSR loading etc. v2: Removed camelcase in functions and variables. v3: Do some minimal check to assert if CSR program is not loaded. v4: 1] Used an appropriate function lookup_power_well() to identify power well, instead of using a magic number which can change in future. 2] Split the conditions further in assert_can_enable_DC5() and added more checks. 3] Removed all WARNs from assert_can_disable_DC5 as they were unnecessary and added two new ones. 4] Changed variable names as updated in earlier patches. v5: 1] Change lookup_power_well function to take an int power well id. 2] Define a new intel_display_power_well_is_enabled helper function to check whether a particular power well is enabled. 3] Use CSR-related mutex in assert_csr_loaded function. v6: Remove use of dc5_enabled variable as it's no longer needed. v7: 1] Rebase to latest. 2] Move all DC5-related functions from intel_display.c to intel_runtime_pm.c. v8: After adding dmc ver 1.0 support rebased on top of nightly. (Animesh) v9: Modified below changes based on review comments from Imre. - Moved intel_display_power_well_is_enabled() to intel_runtime_pm.c. - Removed mutex lock from assert_csr_loaded(). (Animesh) Issue: VIZ-2819 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Suketu Shah <suketu.j.shah@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-16 16:52:10 +08:00
void assert_csr_loaded(struct drm_i915_private *dev_priv);
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
/* intel_dp.c */
void intel_dp_init(struct drm_device *dev, int output_reg, enum port port);
bool intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
struct intel_connector *intel_connector);
void intel_dp_set_link_params(struct intel_dp *intel_dp,
const struct intel_crtc_state *pipe_config);
void intel_dp_start_link_train(struct intel_dp *intel_dp);
void intel_dp_stop_link_train(struct intel_dp *intel_dp);
void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode);
void intel_dp_encoder_destroy(struct drm_encoder *encoder);
int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc);
bool intel_dp_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config);
bool intel_dp_is_edp(struct drm_device *dev, enum port port);
enum irqreturn intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port,
bool long_hpd);
void intel_edp_backlight_on(struct intel_dp *intel_dp);
void intel_edp_backlight_off(struct intel_dp *intel_dp);
drm/i915: finish off reverting eDP VDD changes This is a small follow-up fix to the series of eDP VDD back and forth we've had recently. This is effectively a combined revert of three commits: commit 2c2894f698fffd8ff53e1e1d3834f9e1035b1f39 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Mar 7 20:05:20 2014 -0300 drm/i915: properly disable the VDD when disabling the panel commit b3064154dfd37deb386b1e459c54e1ca2460b3d5 Author: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Date: Tue Mar 4 00:42:44 2014 +0100 drm/i915: Don't just say it, actually force edp vdd commit dff392dbd258381a6c3164f38420593f2d291e3b Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Dec 6 17:32:41 2013 -0200 drm/i915: don't touch the VDD when disabling the panel which shows that we're pretty close back to where we started already. The first two were basically reverting the last, but missing the WARN. Add that back. We also OCD the intel_ prefix back to intel_edp_panel_vdd_on() which was lost somewhere in between. The circle closes. For future reference, "drm/i915: don't touch the VDD when disabling the panel" failed to take into account commit 6cb49835da0426f69a2931bc2a0a8156344b0e41 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun May 20 17:14:50 2012 +0200 drm/i915: enable vdd when switching off the eDP panel and commit 35a38556d900b9cb5dfa2529c93944b847f8a8a4 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun Aug 12 22:17:14 2012 +0200 drm/i915: reorder edp disabling to fix ivb MacBook Air Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-17 22:43:36 +08:00
void intel_edp_panel_vdd_on(struct intel_dp *intel_dp);
void intel_edp_panel_on(struct intel_dp *intel_dp);
void intel_edp_panel_off(struct intel_dp *intel_dp);
2014-05-02 12:02:48 +08:00
void intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connector);
void intel_dp_mst_suspend(struct drm_device *dev);
void intel_dp_mst_resume(struct drm_device *dev);
int intel_dp_max_link_rate(struct intel_dp *intel_dp);
int intel_dp_rate_select(struct intel_dp *intel_dp, int rate);
2014-05-02 12:02:48 +08:00
void intel_dp_hot_plug(struct intel_encoder *intel_encoder);
void vlv_power_sequencer_reset(struct drm_i915_private *dev_priv);
uint32_t intel_dp_pack_aux(const uint8_t *src, int src_bytes);
void intel_plane_destroy(struct drm_plane *plane);
void intel_edp_drrs_enable(struct intel_dp *intel_dp);
void intel_edp_drrs_disable(struct intel_dp *intel_dp);
void intel_edp_drrs_invalidate(struct drm_device *dev,
unsigned frontbuffer_bits);
void intel_edp_drrs_flush(struct drm_device *dev, unsigned frontbuffer_bits);
drm/i915: Check live status before reading edid The Bspec is very clear that Live status must be checked about before trying to read EDID over DDC channel. This patch makes sure that HDMI EDID is read only when live status is up. The live status doesn't seem to perform very consistent across various platforms when tested with different monitors. The reason behind that is some monitors are late to provide right voltage to set live_status up. So, after getting the interrupt, for a small duration, live status reg fluctuates, and then settles down showing the correct staus. This is explained here in, in a rough way: HPD line ________________ |\ T1 = Monitor Hotplug causing IRQ | \______________________________________ | | | | | | T2 = Live status is stable | | _____________________________________ | | /| Live status _____________|_|/ | | | | | | | | | | T0 T1 T2 (Between T1 and T2 Live status fluctuates or can be even low, depending on the monitor) After several experiments, we have concluded that a max delay of 30ms is enough to allow the live status to settle down with most of the monitors. This total delay of 30ms has been split into a resolution of 3 retries of 10ms each, for the better cases. This delay is kept at 30ms, keeping in consideration that, HDCP compliance expect the HPD handler to respond a plug out in 100ms, by disabling port. v2: Adding checks for VLV/CHV as well. Reusing old ibx and g4x functions to check digital port status. Adding a separate function to get bxt live status (Daniel) v3: Using intel_encoder->hpd_pin to check the live status (Siva) Moving the live status read to intel_hdmi_probe and passing parameter to read/not to read the edid. (me) v4: * Added live status check for all platforms using intel_digital_port_connected. * Rebased on top of Jani's DP cleanup series * Some monitors take time in setting the live status. So retry for few times if this is a connect HPD v5: Removed extra "drm/i915" from commit message. Adding Shashank's sob which was missed. v6: Drop the (!detect_edid && !live_status check) check because for DDI ports which are enumerated as hdmi as well as DP, we don't have a mechanism to differentiate between DP and hdmi inside the encoder's hot_plug. This leads to call to the hdmi's hot_plug hook for DP as well as hdmi which leads to issues during unplug because of the above check. v7: Make intel_digital_port_connected global in this patch, some reformatting of while loop, adding a print when live status is not up. (Rodrigo) v8: Rebase it on nightly which involved skipping the hot_plug hook for now and letting the live_status check happen in detect until the hpd handling part is finalized (Daniel) Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Sonika Jindal <sonika.jindal@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-15 12:14:20 +08:00
bool intel_digital_port_connected(struct drm_i915_private *dev_priv,
struct intel_digital_port *port);
void hsw_dp_set_ddi_pll_sel(struct intel_crtc_state *pipe_config);
2014-05-02 12:02:48 +08:00
/* intel_dp_mst.c */
int intel_dp_mst_encoder_init(struct intel_digital_port *intel_dig_port, int conn_id);
void intel_dp_mst_encoder_cleanup(struct intel_digital_port *intel_dig_port);
/* intel_dsi.c */
void intel_dsi_init(struct drm_device *dev);
/* intel_dvo.c */
void intel_dvo_init(struct drm_device *dev);
/* legacy fbdev emulation in intel_fbdev.c */
#ifdef CONFIG_DRM_FBDEV_EMULATION
extern int intel_fbdev_init(struct drm_device *dev);
extern void intel_fbdev_initial_config(void *data, async_cookie_t cookie);
extern void intel_fbdev_fini(struct drm_device *dev);
extern void intel_fbdev_set_suspend(struct drm_device *dev, int state, bool synchronous);
extern void intel_fbdev_output_poll_changed(struct drm_device *dev);
extern void intel_fbdev_restore_mode(struct drm_device *dev);
#else
static inline int intel_fbdev_init(struct drm_device *dev)
{
return 0;
}
static inline void intel_fbdev_initial_config(void *data, async_cookie_t cookie)
{
}
static inline void intel_fbdev_fini(struct drm_device *dev)
{
}
static inline void intel_fbdev_set_suspend(struct drm_device *dev, int state, bool synchronous)
{
}
static inline void intel_fbdev_restore_mode(struct drm_device *dev)
{
}
#endif
/* intel_fbc.c */
bool intel_fbc_enabled(struct drm_i915_private *dev_priv);
void intel_fbc_update(struct drm_i915_private *dev_priv);
void intel_fbc_init(struct drm_i915_private *dev_priv);
void intel_fbc_disable(struct drm_i915_private *dev_priv);
void intel_fbc_disable_crtc(struct intel_crtc *crtc);
void intel_fbc_invalidate(struct drm_i915_private *dev_priv,
unsigned int frontbuffer_bits,
enum fb_op_origin origin);
void intel_fbc_flush(struct drm_i915_private *dev_priv,
unsigned int frontbuffer_bits, enum fb_op_origin origin);
void intel_fbc_cleanup_cfb(struct drm_i915_private *dev_priv);
/* intel_hdmi.c */
void intel_hdmi_init(struct drm_device *dev, int hdmi_reg, enum port port);
void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
struct intel_connector *intel_connector);
struct intel_hdmi *enc_to_intel_hdmi(struct drm_encoder *encoder);
bool intel_hdmi_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config);
/* intel_lvds.c */
void intel_lvds_init(struct drm_device *dev);
bool intel_is_dual_link_lvds(struct drm_device *dev);
/* intel_modes.c */
int intel_connector_update_modes(struct drm_connector *connector,
struct edid *edid);
int intel_ddc_get_modes(struct drm_connector *c, struct i2c_adapter *adapter);
void intel_attach_force_audio_property(struct drm_connector *connector);
void intel_attach_broadcast_rgb_property(struct drm_connector *connector);
void intel_attach_aspect_ratio_property(struct drm_connector *connector);
/* intel_overlay.c */
void intel_setup_overlay(struct drm_device *dev);
void intel_cleanup_overlay(struct drm_device *dev);
int intel_overlay_switch_off(struct intel_overlay *overlay);
int intel_overlay_put_image(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int intel_overlay_attrs(struct drm_device *dev, void *data,
struct drm_file *file_priv);
void intel_overlay_reset(struct drm_i915_private *dev_priv);
/* intel_panel.c */
int intel_panel_init(struct intel_panel *panel,
struct drm_display_mode *fixed_mode,
struct drm_display_mode *downclock_mode);
void intel_panel_fini(struct intel_panel *panel);
void intel_fixed_panel_mode(const struct drm_display_mode *fixed_mode,
struct drm_display_mode *adjusted_mode);
void intel_pch_panel_fitting(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config,
int fitting_mode);
void intel_gmch_panel_fitting(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config,
int fitting_mode);
void intel_panel_set_backlight_acpi(struct intel_connector *connector,
u32 level, u32 max);
int intel_panel_setup_backlight(struct drm_connector *connector, enum pipe pipe);
void intel_panel_enable_backlight(struct intel_connector *connector);
void intel_panel_disable_backlight(struct intel_connector *connector);
void intel_panel_destroy_backlight(struct drm_connector *connector);
enum drm_connector_status intel_panel_detect(struct drm_device *dev);
extern struct drm_display_mode *intel_find_panel_downclock(
struct drm_device *dev,
struct drm_display_mode *fixed_mode,
struct drm_connector *connector);
drm/i915: Register the backlight device after the modeset init Currently we register the backlight device as soon as we register the connector. That means we can get backlight requests from userspace already before reading out the current modeset hardware state. That means we don't yet know the current crtc->encoder->connector mapping, which causes problems for VLV/CHV which need to know the current pipe in order to figure out which BLC registers to poke. Currently we just ignore such requests fairly deep in the backlight code which means the backlight device brightness property will get out of sync with our backlight.level and the actual hardware state. Fix the problem by delaying the backlight device registration until the entire modeset init has been performed. And we also move the backlight unregisteration to happen as the first thing during the modeset cleanup so that we also won't be bothered with userspace backlight requested during teardown. This is a real world problem on machines using systemd, because systemd, for some reason, wants to restore the backlight to the level it used last time. And that happens as soon as it sees the backlight device appearing in the system. Sometimes the userspace access makes it through before the modeset init, sometimes not. v2: Do not lie to the user in the debug prints (Jani) Include connector name in the prints (Jani) Fix a typo in the commit message (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-07 21:19:46 +08:00
void intel_backlight_register(struct drm_device *dev);
void intel_backlight_unregister(struct drm_device *dev);
/* intel_psr.c */
void intel_psr_enable(struct intel_dp *intel_dp);
void intel_psr_disable(struct intel_dp *intel_dp);
void intel_psr_invalidate(struct drm_device *dev,
unsigned frontbuffer_bits);
void intel_psr_flush(struct drm_device *dev,
unsigned frontbuffer_bits,
enum fb_op_origin origin);
void intel_psr_init(struct drm_device *dev);
void intel_psr_single_frame_update(struct drm_device *dev,
unsigned frontbuffer_bits);
/* intel_runtime_pm.c */
int intel_power_domains_init(struct drm_i915_private *);
void intel_power_domains_fini(struct drm_i915_private *);
void intel_power_domains_init_hw(struct drm_i915_private *dev_priv);
void intel_runtime_pm_enable(struct drm_i915_private *dev_priv);
bool intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
enum intel_display_power_domain domain);
bool __intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
enum intel_display_power_domain domain);
void intel_display_power_get(struct drm_i915_private *dev_priv,
enum intel_display_power_domain domain);
void intel_display_power_put(struct drm_i915_private *dev_priv,
enum intel_display_power_domain domain);
void intel_aux_display_runtime_get(struct drm_i915_private *dev_priv);
void intel_aux_display_runtime_put(struct drm_i915_private *dev_priv);
void intel_runtime_pm_get(struct drm_i915_private *dev_priv);
void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv);
void intel_runtime_pm_put(struct drm_i915_private *dev_priv);
void intel_display_set_init_power(struct drm_i915_private *dev, bool enable);
drm/i915: Implement PHY lane power gating for CHV Powergate the PHY lanes when they're not needed. For HDMI all four lanes are needed always, but for DP we can enable only the needed lanes. To power down the unused lanes we use some power down override bits in the DISPLAY_PHY_CONTROL register. Without the overrides it appears that the hardware always powers on all the lanes. When the port is disabled the power down override is not needed and the lanes will shut off on their own. That also means the override is critical to actually be able to access the DPIO registers before the port is actually enabled. Additionally the common lanes will power down when not needed. CL1 remains on as long as anything else is on, CL2 will shut down when all the lanes in the same channel will shut down. There is one exception for CL2 that will be dealt in a separate patch for clarity. With potentially some lanes powered down, the DP code now has to check the number of active lanes before accessing PCS/TX registers. All registers in powered down blocks will reads as 0xffffffff, and soe we would drown in warnings from vlv_dpio_read() if we allowed the code to access all those registers. Another important detail in the DP code is the "TX latency optimal" setting. Normally the second TX lane acts as some kind of reset master, with the other lanes as slaves. But when only a single lane is enabled, that single lane obviously has to be the master. A bit of extra care is needed to reconstruct the initial state of the DISPLAY_PHY_CONTROL register since it can't be read safely. So instead read the actual lane status from the DPLL/PHY_STATUS registers and use that to determine which lanes ought to be powergated initially. We also need to switch the PHY power modes to "deep PSR" to avoid a hard system hang when powering down the single channel PHY. Also sprinkle a few debug prints around so that we can monitor the DISPLAY_PHY_STATUS changes without having to read it and risk corrupting it. v2: Add locking to chv_powergate_phy_lanes() v3: Actually enable dynamic powerdown in the PHY and deal with the fallout Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-09 04:45:54 +08:00
void chv_phy_powergate_lanes(struct intel_encoder *encoder,
bool override, unsigned int mask);
drm/i915: Trick CL2 into life on CHV when using pipe B with port B Normmally the common lane in a PHY channel gets powered up when some of the data lanes get powered up. But when we're driving port B with pipe B we don't want to enabled any of the data lanes, and just want the DPLL in the common lane to be active. To make that happens we have to temporarily enable some data lanes after which we can access the DPLL registers in the common lane. Once the pipe is up and running we can drop the power override on the data lanes allowing them to shut down. From this point forward the common lane will in fact stay powered on until the data lanes in the other channel get powered down. Ville's extended explanation from the review thread: On Wed, Aug 19, 2015 at 07:47:41AM +0530, Deepak wrote: > One Q, why only for port B? Port C is also in same common lane right? Port B is in the first PHY channel which also houses CL1. CL1 always powers up whenever any lanes in either PHY channel are powered up. CL2 only powers up if lanes in the second channel (ie. the one with port C) powers up. So in this scenario (pipe B->port B) we want the DPLL from CL2, but ideally we only want to power up the lanes for port B. Powering up port B lanes will only power up CL1, but as we need CL2 instead we need to, temporarily, power up some lanes in port C as well. Crossing the streams the other way (pipe A->port C) is not a problem since CL1 powers up whenever anything else powers up. So powering up some port C lanes is enough on its own to make the CL1 DPLL operational, even though CL1 and the lanes live in separate channels. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> [danvet: Amend commit message with extended explanation.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-09 04:45:55 +08:00
bool chv_phy_powergate_ch(struct drm_i915_private *dev_priv, enum dpio_phy phy,
enum dpio_channel ch, bool override);
drm/i915: Implement PHY lane power gating for CHV Powergate the PHY lanes when they're not needed. For HDMI all four lanes are needed always, but for DP we can enable only the needed lanes. To power down the unused lanes we use some power down override bits in the DISPLAY_PHY_CONTROL register. Without the overrides it appears that the hardware always powers on all the lanes. When the port is disabled the power down override is not needed and the lanes will shut off on their own. That also means the override is critical to actually be able to access the DPIO registers before the port is actually enabled. Additionally the common lanes will power down when not needed. CL1 remains on as long as anything else is on, CL2 will shut down when all the lanes in the same channel will shut down. There is one exception for CL2 that will be dealt in a separate patch for clarity. With potentially some lanes powered down, the DP code now has to check the number of active lanes before accessing PCS/TX registers. All registers in powered down blocks will reads as 0xffffffff, and soe we would drown in warnings from vlv_dpio_read() if we allowed the code to access all those registers. Another important detail in the DP code is the "TX latency optimal" setting. Normally the second TX lane acts as some kind of reset master, with the other lanes as slaves. But when only a single lane is enabled, that single lane obviously has to be the master. A bit of extra care is needed to reconstruct the initial state of the DISPLAY_PHY_CONTROL register since it can't be read safely. So instead read the actual lane status from the DPLL/PHY_STATUS registers and use that to determine which lanes ought to be powergated initially. We also need to switch the PHY power modes to "deep PSR" to avoid a hard system hang when powering down the single channel PHY. Also sprinkle a few debug prints around so that we can monitor the DISPLAY_PHY_STATUS changes without having to read it and risk corrupting it. v2: Add locking to chv_powergate_phy_lanes() v3: Actually enable dynamic powerdown in the PHY and deal with the fallout Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-09 04:45:54 +08:00
/* intel_pm.c */
void intel_init_clock_gating(struct drm_device *dev);
void intel_suspend_hw(struct drm_device *dev);
int ilk_wm_max_level(const struct drm_device *dev);
void intel_update_watermarks(struct drm_crtc *crtc);
void intel_init_pm(struct drm_device *dev);
void intel_pm_setup(struct drm_device *dev);
void intel_gpu_ips_init(struct drm_i915_private *dev_priv);
void intel_gpu_ips_teardown(void);
void intel_init_gt_powersave(struct drm_device *dev);
void intel_cleanup_gt_powersave(struct drm_device *dev);
void intel_enable_gt_powersave(struct drm_device *dev);
void intel_disable_gt_powersave(struct drm_device *dev);
void intel_suspend_gt_powersave(struct drm_device *dev);
void intel_reset_gt_powersave(struct drm_device *dev);
drm/i915: allow package C8+ states on Haswell (disabled) This patch allows PC8+ states on Haswell. These states can only be reached when all the display outputs are disabled, and they allow some more power savings. The fact that the graphics device is allowing PC8+ doesn't mean that the machine will actually enter PC8+: all the other devices also need to allow PC8+. For now this option is disabled by default. You need i915.allow_pc8=1 if you want it. This patch adds a big comment inside i915_drv.h explaining how it works and how it tracks things. Read it. v2: (this is not really v2, many previous versions were already sent, but they had different names) - Use the new functions to enable/disable GTIMR and GEN6_PMIMR - Rename almost all variables and functions to names suggested by Chris - More WARNs on the IRQ handling code - Also disable PC8 when there's GPU work to do (thanks to Ben for the help on this), so apps can run caster - Enable PC8 on a delayed work function that is delayed for 5 seconds. This makes sure we only enable PC8+ if we're really idle - Make sure we're not in PC8+ when suspending v3: - WARN if IRQs are disabled on __wait_seqno - Replace some DRM_ERRORs with WARNs - Fix calls to restore GT and PM interrupts - Use intel_mark_busy instead of intel_ring_advance to disable PC8 v4: - Use the force_wake, Luke! v5: - Remove the "IIR is not zero" WARNs - Move the force_wake chunk to its own patch - Only restore what's missing from RC6, not everything Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-20 00:18:09 +08:00
void gen6_update_ring_freq(struct drm_device *dev);
void gen6_rps_busy(struct drm_i915_private *dev_priv);
void gen6_rps_reset_ei(struct drm_i915_private *dev_priv);
void gen6_rps_idle(struct drm_i915_private *dev_priv);
void gen6_rps_boost(struct drm_i915_private *dev_priv,
struct intel_rps_client *rps,
unsigned long submitted);
void intel_queue_rps_boost_for_request(struct drm_device *dev,
struct drm_i915_gem_request *req);
void vlv_wm_get_hw_state(struct drm_device *dev);
void ilk_wm_get_hw_state(struct drm_device *dev);
void skl_wm_get_hw_state(struct drm_device *dev);
void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv,
struct skl_ddb_allocation *ddb /* out */);
uint32_t ilk_pipe_pixel_rate(const struct intel_crtc_state *pipe_config);
/* intel_sdvo.c */
bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob);
drm/i915: Enable/Disable PSR Adding Enable and Disable PSR functionalities. This includes setting the PSR configuration over AUX, sending SDP VSC DIP over the eDP PIPE config, enabling PSR in the sink via DPCD register and finally enabling PSR on the host. This patch is based on initial PSR code by Sateesh Kavuri and Kumar Shobhit but in a different implementation. v2: * moved functions around and changed its names. * removed VSC DIP unset from disable. * remove FBC wa. * don't mask LSPS anymore. * incorporate new crtc usage after a rebase. v3: Make a clear separation between Sink (Panel) and Source (HW) enabling. v4: Fix identation and other style issues raised by checkpatch (by Paulo). v5: Changes according to Paulo's review: static on write_vsc; avoid using dp_to_dev when already calling dp_to_dig_port; remove unecessary TP default time setting; remove unecessary interrupts disabling; remove unecessary wait_for_vblank when disabling psr; v6: remove unecessary wait_for_vblank when writing vsc; v7: adding setup once function to avoid unnecessarily write to vsc and set debug_ctl every time we enable or disable psr. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Credits-by: Sateesh Kavuri <sateesh.kavuri@intel.com> Credits-by: Shobhit Kumar <shobhit.kumar@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Shobhit Kumar <shobhit.kumar@intel.com> [danvet: Apply Paulo's suggestion for unconditionally clearing the control register when writing the DIP.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-12 05:44:58 +08:00
/* intel_sprite.c */
int intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane);
int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
struct drm_file *file_priv);
void intel_pipe_update_start(struct intel_crtc *crtc);
void intel_pipe_update_end(struct intel_crtc *crtc);
/* intel_tv.c */
void intel_tv_init(struct drm_device *dev);
drm/i915: Move to atomic plane helpers (v9) Switch plane handling to use the atomic plane helpers. This means that rather than provide our own implementations of .update_plane() and .disable_plane(), we expose the lower-level check/prepare/commit/cleanup entrypoints and let the DRM core implement update/disable for us using those entrypoints. The other main change that falls out of this patch is that our drm_plane's will now always have a valid plane->state that contains the relevant plane state (initial state is allocated at plane creation). The base drm_plane_state pointed to holds the requested source/dest coordinates, and the subclassed intel_plane_state holds the adjusted values that our driver actually uses. v2: - Renamed file from intel_atomic.c to intel_atomic_plane.c (Daniel) - Fix a copy/paste comment mistake (Bob) v3: - Use prepare/cleanup functions that we've already factored out - Use newly refactored pre_commit/commit/post_commit to avoid sleeping during vblank evasion v4: - Rebase to latest di-nightly requires adding an 'old_state' parameter to atomic_update; v5: - Must have botched a rebase somewhere and lost some work. Restore state 'dirty' flag to let begin/end code know which planes to run the pre_commit/post_commit hooks for. This would have actually shown up as broken in the next commit rather than this one. v6: - Squash kerneldoc patch into this one. - Previous patches have now already taken care of most of the infrastructure that used to be in this patch. All we're adding here now is some thin wrappers. v7: - Check return of intel_plane_duplicate_state() for allocation failures. v8: - Drop unused drm_plane_state -> intel_plane_state cast. (Ander) - Squash in actual transition to plane helpers. Significant refactoring earlier in the patchset has made the combined prep+transition much easier to swallow than it was in earlier iterations. (Ander) v9: - s/track_fbs/disabled_planes/ in the atomic crtc flags. The only fb's we need to update frontbuffer tracking for are those on a plane about to be disabled (since the atomic helpers never call prepare_fb() when disabling a plane), so the new name more accurately describes what we're actually tracking. Testcase: igt/kms_plane Testcase: igt/kms_universal_plane Testcase: igt/kms_cursor_crc Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-24 02:41:52 +08:00
/* intel_atomic.c */
int intel_connector_atomic_get_property(struct drm_connector *connector,
const struct drm_connector_state *state,
struct drm_property *property,
uint64_t *val);
struct drm_crtc_state *intel_crtc_duplicate_state(struct drm_crtc *crtc);
void intel_crtc_destroy_state(struct drm_crtc *crtc,
struct drm_crtc_state *state);
struct drm_atomic_state *intel_atomic_state_alloc(struct drm_device *dev);
void intel_atomic_state_clear(struct drm_atomic_state *);
struct intel_shared_dpll_config *
intel_atomic_get_shared_dpll_state(struct drm_atomic_state *s);
static inline struct intel_crtc_state *
intel_atomic_get_crtc_state(struct drm_atomic_state *state,
struct intel_crtc *crtc)
{
struct drm_crtc_state *crtc_state;
crtc_state = drm_atomic_get_crtc_state(state, &crtc->base);
if (IS_ERR(crtc_state))
return ERR_CAST(crtc_state);
return to_intel_crtc_state(crtc_state);
}
drm/i915: setup scalers for crtc_compute_config Added intel_atomic_setup_scalers to setup scalers based on staged scaling requests from a crtc and its planes. If staged requests are supportable, this function assigns scalers to requested planes and crtc. Note that the scaler assignement itself is staged into crtc_state and respective plane_states for later commit after all checks have been done. overall high level flow: - scaler requests are staged into crtc_state by planes/crtc - check whether staged scaling requests can be supported - add planes using scalers that aren't in current transaction - assign scalers to requested users - as part of plane commit, scalers will be committed (i.e., either attached or detached) to respective planes in hw - as part of crtc_commit, scaler will be either attached or detached to crtc in hw crtc_compute_config calls intel_atomic_setup_scalers() to start scaler assignments as per scaler state in crtc config. This call should be moved to atomic crtc once it is available. v2: -removed a log message (me) -changed input parameter to crtc_state (me) v3: -remove assigning plane_state returned by drm_atomic_get_plane_state (Matt) -fail if there is an error from drm_atomic_get_plane_state (Matt) v4: -changes to align with updated scaler structure (Matt, me) v5: -added addtional checks before enabling HQ mode (me) -added comments to enable HQ mode (Matt) Signed-off-by: Chandra Konduru <chandra.konduru@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-10 07:42:46 +08:00
int intel_atomic_setup_scalers(struct drm_device *dev,
struct intel_crtc *intel_crtc,
struct intel_crtc_state *crtc_state);
/* intel_atomic_plane.c */
struct intel_plane_state *intel_create_plane_state(struct drm_plane *plane);
drm/i915: Move to atomic plane helpers (v9) Switch plane handling to use the atomic plane helpers. This means that rather than provide our own implementations of .update_plane() and .disable_plane(), we expose the lower-level check/prepare/commit/cleanup entrypoints and let the DRM core implement update/disable for us using those entrypoints. The other main change that falls out of this patch is that our drm_plane's will now always have a valid plane->state that contains the relevant plane state (initial state is allocated at plane creation). The base drm_plane_state pointed to holds the requested source/dest coordinates, and the subclassed intel_plane_state holds the adjusted values that our driver actually uses. v2: - Renamed file from intel_atomic.c to intel_atomic_plane.c (Daniel) - Fix a copy/paste comment mistake (Bob) v3: - Use prepare/cleanup functions that we've already factored out - Use newly refactored pre_commit/commit/post_commit to avoid sleeping during vblank evasion v4: - Rebase to latest di-nightly requires adding an 'old_state' parameter to atomic_update; v5: - Must have botched a rebase somewhere and lost some work. Restore state 'dirty' flag to let begin/end code know which planes to run the pre_commit/post_commit hooks for. This would have actually shown up as broken in the next commit rather than this one. v6: - Squash kerneldoc patch into this one. - Previous patches have now already taken care of most of the infrastructure that used to be in this patch. All we're adding here now is some thin wrappers. v7: - Check return of intel_plane_duplicate_state() for allocation failures. v8: - Drop unused drm_plane_state -> intel_plane_state cast. (Ander) - Squash in actual transition to plane helpers. Significant refactoring earlier in the patchset has made the combined prep+transition much easier to swallow than it was in earlier iterations. (Ander) v9: - s/track_fbs/disabled_planes/ in the atomic crtc flags. The only fb's we need to update frontbuffer tracking for are those on a plane about to be disabled (since the atomic helpers never call prepare_fb() when disabling a plane), so the new name more accurately describes what we're actually tracking. Testcase: igt/kms_plane Testcase: igt/kms_universal_plane Testcase: igt/kms_cursor_crc Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-24 02:41:52 +08:00
struct drm_plane_state *intel_plane_duplicate_state(struct drm_plane *plane);
void intel_plane_destroy_state(struct drm_plane *plane,
struct drm_plane_state *state);
extern const struct drm_plane_helper_funcs intel_plane_helper_funcs;
#endif /* __INTEL_DRV_H__ */