OpenCloudOS-Kernel/drivers/infiniband/hw/qib/qib_uc.c

537 lines
14 KiB
C
Raw Normal View History

/*
* Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation.
* All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include "qib.h"
/* cut down ridiculously long IB macro names */
#define OP(x) IB_OPCODE_UC_##x
/**
* qib_make_uc_req - construct a request packet (SEND, RDMA write)
* @qp: a pointer to the QP
*
* Return 1 if constructed; otherwise, return 0.
*/
int qib_make_uc_req(struct qib_qp *qp)
{
struct qib_other_headers *ohdr;
struct qib_swqe *wqe;
unsigned long flags;
u32 hwords;
u32 bth0;
u32 len;
u32 pmtu = qp->pmtu;
int ret = 0;
spin_lock_irqsave(&qp->s_lock, flags);
if (!(ib_qib_state_ops[qp->state] & QIB_PROCESS_SEND_OK)) {
if (!(ib_qib_state_ops[qp->state] & QIB_FLUSH_SEND))
goto bail;
/* We are in the error state, flush the work request. */
if (qp->s_last == qp->s_head)
goto bail;
/* If DMAs are in progress, we can't flush immediately. */
if (atomic_read(&qp->s_dma_busy)) {
qp->s_flags |= QIB_S_WAIT_DMA;
goto bail;
}
wqe = get_swqe_ptr(qp, qp->s_last);
qib_send_complete(qp, wqe, IB_WC_WR_FLUSH_ERR);
goto done;
}
ohdr = &qp->s_hdr->u.oth;
if (qp->remote_ah_attr.ah_flags & IB_AH_GRH)
ohdr = &qp->s_hdr->u.l.oth;
/* header size in 32-bit words LRH+BTH = (8+12)/4. */
hwords = 5;
bth0 = 0;
/* Get the next send request. */
wqe = get_swqe_ptr(qp, qp->s_cur);
qp->s_wqe = NULL;
switch (qp->s_state) {
default:
if (!(ib_qib_state_ops[qp->state] &
QIB_PROCESS_NEXT_SEND_OK))
goto bail;
/* Check if send work queue is empty. */
if (qp->s_cur == qp->s_head)
goto bail;
/*
* Start a new request.
*/
wqe->psn = qp->s_next_psn;
qp->s_psn = qp->s_next_psn;
qp->s_sge.sge = wqe->sg_list[0];
qp->s_sge.sg_list = wqe->sg_list + 1;
qp->s_sge.num_sge = wqe->wr.num_sge;
qp->s_sge.total_len = wqe->length;
len = wqe->length;
qp->s_len = len;
switch (wqe->wr.opcode) {
case IB_WR_SEND:
case IB_WR_SEND_WITH_IMM:
if (len > pmtu) {
qp->s_state = OP(SEND_FIRST);
len = pmtu;
break;
}
if (wqe->wr.opcode == IB_WR_SEND)
qp->s_state = OP(SEND_ONLY);
else {
qp->s_state =
OP(SEND_ONLY_WITH_IMMEDIATE);
/* Immediate data comes after the BTH */
ohdr->u.imm_data = wqe->wr.ex.imm_data;
hwords += 1;
}
if (wqe->wr.send_flags & IB_SEND_SOLICITED)
bth0 |= IB_BTH_SOLICITED;
qp->s_wqe = wqe;
if (++qp->s_cur >= qp->s_size)
qp->s_cur = 0;
break;
case IB_WR_RDMA_WRITE:
case IB_WR_RDMA_WRITE_WITH_IMM:
ohdr->u.rc.reth.vaddr =
cpu_to_be64(wqe->wr.wr.rdma.remote_addr);
ohdr->u.rc.reth.rkey =
cpu_to_be32(wqe->wr.wr.rdma.rkey);
ohdr->u.rc.reth.length = cpu_to_be32(len);
hwords += sizeof(struct ib_reth) / 4;
if (len > pmtu) {
qp->s_state = OP(RDMA_WRITE_FIRST);
len = pmtu;
break;
}
if (wqe->wr.opcode == IB_WR_RDMA_WRITE)
qp->s_state = OP(RDMA_WRITE_ONLY);
else {
qp->s_state =
OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE);
/* Immediate data comes after the RETH */
ohdr->u.rc.imm_data = wqe->wr.ex.imm_data;
hwords += 1;
if (wqe->wr.send_flags & IB_SEND_SOLICITED)
bth0 |= IB_BTH_SOLICITED;
}
qp->s_wqe = wqe;
if (++qp->s_cur >= qp->s_size)
qp->s_cur = 0;
break;
default:
goto bail;
}
break;
case OP(SEND_FIRST):
qp->s_state = OP(SEND_MIDDLE);
/* FALLTHROUGH */
case OP(SEND_MIDDLE):
len = qp->s_len;
if (len > pmtu) {
len = pmtu;
break;
}
if (wqe->wr.opcode == IB_WR_SEND)
qp->s_state = OP(SEND_LAST);
else {
qp->s_state = OP(SEND_LAST_WITH_IMMEDIATE);
/* Immediate data comes after the BTH */
ohdr->u.imm_data = wqe->wr.ex.imm_data;
hwords += 1;
}
if (wqe->wr.send_flags & IB_SEND_SOLICITED)
bth0 |= IB_BTH_SOLICITED;
qp->s_wqe = wqe;
if (++qp->s_cur >= qp->s_size)
qp->s_cur = 0;
break;
case OP(RDMA_WRITE_FIRST):
qp->s_state = OP(RDMA_WRITE_MIDDLE);
/* FALLTHROUGH */
case OP(RDMA_WRITE_MIDDLE):
len = qp->s_len;
if (len > pmtu) {
len = pmtu;
break;
}
if (wqe->wr.opcode == IB_WR_RDMA_WRITE)
qp->s_state = OP(RDMA_WRITE_LAST);
else {
qp->s_state =
OP(RDMA_WRITE_LAST_WITH_IMMEDIATE);
/* Immediate data comes after the BTH */
ohdr->u.imm_data = wqe->wr.ex.imm_data;
hwords += 1;
if (wqe->wr.send_flags & IB_SEND_SOLICITED)
bth0 |= IB_BTH_SOLICITED;
}
qp->s_wqe = wqe;
if (++qp->s_cur >= qp->s_size)
qp->s_cur = 0;
break;
}
qp->s_len -= len;
qp->s_hdrwords = hwords;
qp->s_cur_sge = &qp->s_sge;
qp->s_cur_size = len;
qib_make_ruc_header(qp, ohdr, bth0 | (qp->s_state << 24),
qp->s_next_psn++ & QIB_PSN_MASK);
done:
ret = 1;
goto unlock;
bail:
qp->s_flags &= ~QIB_S_BUSY;
unlock:
spin_unlock_irqrestore(&qp->s_lock, flags);
return ret;
}
/**
* qib_uc_rcv - handle an incoming UC packet
* @ibp: the port the packet came in on
* @hdr: the header of the packet
* @has_grh: true if the packet has a GRH
* @data: the packet data
* @tlen: the length of the packet
* @qp: the QP for this packet.
*
* This is called from qib_qp_rcv() to process an incoming UC packet
* for the given QP.
* Called at interrupt level.
*/
void qib_uc_rcv(struct qib_ibport *ibp, struct qib_ib_header *hdr,
int has_grh, void *data, u32 tlen, struct qib_qp *qp)
{
struct qib_other_headers *ohdr;
u32 opcode;
u32 hdrsize;
u32 psn;
u32 pad;
struct ib_wc wc;
u32 pmtu = qp->pmtu;
struct ib_reth *reth;
int ret;
/* Check for GRH */
if (!has_grh) {
ohdr = &hdr->u.oth;
hdrsize = 8 + 12; /* LRH + BTH */
} else {
ohdr = &hdr->u.l.oth;
hdrsize = 8 + 40 + 12; /* LRH + GRH + BTH */
}
opcode = be32_to_cpu(ohdr->bth[0]);
if (qib_ruc_check_hdr(ibp, hdr, has_grh, qp, opcode))
return;
psn = be32_to_cpu(ohdr->bth[2]);
opcode >>= 24;
/* Compare the PSN verses the expected PSN. */
if (unlikely(qib_cmp24(psn, qp->r_psn) != 0)) {
/*
* Handle a sequence error.
* Silently drop any current message.
*/
qp->r_psn = psn;
inv:
if (qp->r_state == OP(SEND_FIRST) ||
qp->r_state == OP(SEND_MIDDLE)) {
set_bit(QIB_R_REWIND_SGE, &qp->r_aflags);
qp->r_sge.num_sge = 0;
} else
IB/qib: Avoid returning EBUSY from MR deregister A timing issue can occur where qib_mr_dereg can return -EBUSY if the MR use count is not zero. This can occur if the MR is de-registered while RDMA read response packets are being progressed from the SDMA ring. The suspicion is that the peer sent an RDMA read request, which has already been copied across to the peer. The peer sees the completion of his request and then communicates to the responder that the MR is not needed any longer. The responder tries to de-register the MR, catching some responses remaining in the SDMA ring holding the MR use count. The code now uses a get/put paradigm to track MR use counts and coordinates with the MR de-registration process using a completion when the count has reached zero. A timeout on the delay is in place to catch other EBUSY issues. The reference count protocol is as follows: - The return to the user counts as 1 - A reference from the lk_table or the qib_ibdev counts as 1. - Transient I/O operations increase/decrease as necessary A lot of code duplication has been folded into the new routines init_qib_mregion() and deinit_qib_mregion(). Additionally, explicit initialization of fields to zero is now handled by kzalloc(). Also, duplicated code 'while.*num_sge' that decrements reference counts have been consolidated in qib_put_ss(). Reviewed-by: Ramkrishna Vepa <ramkrishna.vepa@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-28 06:33:12 +08:00
qib_put_ss(&qp->r_sge);
qp->r_state = OP(SEND_LAST);
switch (opcode) {
case OP(SEND_FIRST):
case OP(SEND_ONLY):
case OP(SEND_ONLY_WITH_IMMEDIATE):
goto send_first;
case OP(RDMA_WRITE_FIRST):
case OP(RDMA_WRITE_ONLY):
case OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE):
goto rdma_first;
default:
goto drop;
}
}
/* Check for opcode sequence errors. */
switch (qp->r_state) {
case OP(SEND_FIRST):
case OP(SEND_MIDDLE):
if (opcode == OP(SEND_MIDDLE) ||
opcode == OP(SEND_LAST) ||
opcode == OP(SEND_LAST_WITH_IMMEDIATE))
break;
goto inv;
case OP(RDMA_WRITE_FIRST):
case OP(RDMA_WRITE_MIDDLE):
if (opcode == OP(RDMA_WRITE_MIDDLE) ||
opcode == OP(RDMA_WRITE_LAST) ||
opcode == OP(RDMA_WRITE_LAST_WITH_IMMEDIATE))
break;
goto inv;
default:
if (opcode == OP(SEND_FIRST) ||
opcode == OP(SEND_ONLY) ||
opcode == OP(SEND_ONLY_WITH_IMMEDIATE) ||
opcode == OP(RDMA_WRITE_FIRST) ||
opcode == OP(RDMA_WRITE_ONLY) ||
opcode == OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE))
break;
goto inv;
}
if (qp->state == IB_QPS_RTR && !(qp->r_flags & QIB_R_COMM_EST)) {
qp->r_flags |= QIB_R_COMM_EST;
if (qp->ibqp.event_handler) {
struct ib_event ev;
ev.device = qp->ibqp.device;
ev.element.qp = &qp->ibqp;
ev.event = IB_EVENT_COMM_EST;
qp->ibqp.event_handler(&ev, qp->ibqp.qp_context);
}
}
/* OK, process the packet. */
switch (opcode) {
case OP(SEND_FIRST):
case OP(SEND_ONLY):
case OP(SEND_ONLY_WITH_IMMEDIATE):
send_first:
if (test_and_clear_bit(QIB_R_REWIND_SGE, &qp->r_aflags))
qp->r_sge = qp->s_rdma_read_sge;
else {
ret = qib_get_rwqe(qp, 0);
if (ret < 0)
goto op_err;
if (!ret)
goto drop;
/*
* qp->s_rdma_read_sge will be the owner
* of the mr references.
*/
qp->s_rdma_read_sge = qp->r_sge;
}
qp->r_rcv_len = 0;
if (opcode == OP(SEND_ONLY))
goto no_immediate_data;
else if (opcode == OP(SEND_ONLY_WITH_IMMEDIATE))
goto send_last_imm;
/* FALLTHROUGH */
case OP(SEND_MIDDLE):
/* Check for invalid length PMTU or posted rwqe len. */
if (unlikely(tlen != (hdrsize + pmtu + 4)))
goto rewind;
qp->r_rcv_len += pmtu;
if (unlikely(qp->r_rcv_len > qp->r_len))
goto rewind;
qib_copy_sge(&qp->r_sge, data, pmtu, 0);
break;
case OP(SEND_LAST_WITH_IMMEDIATE):
send_last_imm:
wc.ex.imm_data = ohdr->u.imm_data;
hdrsize += 4;
wc.wc_flags = IB_WC_WITH_IMM;
goto send_last;
case OP(SEND_LAST):
no_immediate_data:
wc.ex.imm_data = 0;
wc.wc_flags = 0;
send_last:
/* Get the number of bytes the message was padded by. */
pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
/* Check for invalid length. */
/* XXX LAST len should be >= 1 */
if (unlikely(tlen < (hdrsize + pad + 4)))
goto rewind;
/* Don't count the CRC. */
tlen -= (hdrsize + pad + 4);
wc.byte_len = tlen + qp->r_rcv_len;
if (unlikely(wc.byte_len > qp->r_len))
goto rewind;
wc.opcode = IB_WC_RECV;
qib_copy_sge(&qp->r_sge, data, tlen, 0);
IB/qib: Avoid returning EBUSY from MR deregister A timing issue can occur where qib_mr_dereg can return -EBUSY if the MR use count is not zero. This can occur if the MR is de-registered while RDMA read response packets are being progressed from the SDMA ring. The suspicion is that the peer sent an RDMA read request, which has already been copied across to the peer. The peer sees the completion of his request and then communicates to the responder that the MR is not needed any longer. The responder tries to de-register the MR, catching some responses remaining in the SDMA ring holding the MR use count. The code now uses a get/put paradigm to track MR use counts and coordinates with the MR de-registration process using a completion when the count has reached zero. A timeout on the delay is in place to catch other EBUSY issues. The reference count protocol is as follows: - The return to the user counts as 1 - A reference from the lk_table or the qib_ibdev counts as 1. - Transient I/O operations increase/decrease as necessary A lot of code duplication has been folded into the new routines init_qib_mregion() and deinit_qib_mregion(). Additionally, explicit initialization of fields to zero is now handled by kzalloc(). Also, duplicated code 'while.*num_sge' that decrements reference counts have been consolidated in qib_put_ss(). Reviewed-by: Ramkrishna Vepa <ramkrishna.vepa@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-28 06:33:12 +08:00
qib_put_ss(&qp->s_rdma_read_sge);
last_imm:
wc.wr_id = qp->r_wr_id;
wc.status = IB_WC_SUCCESS;
wc.qp = &qp->ibqp;
wc.src_qp = qp->remote_qpn;
wc.slid = qp->remote_ah_attr.dlid;
wc.sl = qp->remote_ah_attr.sl;
/* zero fields that are N/A */
wc.vendor_err = 0;
wc.pkey_index = 0;
wc.dlid_path_bits = 0;
wc.port_num = 0;
/* Signal completion event if the solicited bit is set. */
qib_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
(ohdr->bth[0] &
cpu_to_be32(IB_BTH_SOLICITED)) != 0);
break;
case OP(RDMA_WRITE_FIRST):
case OP(RDMA_WRITE_ONLY):
case OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE): /* consume RWQE */
rdma_first:
if (unlikely(!(qp->qp_access_flags &
IB_ACCESS_REMOTE_WRITE))) {
goto drop;
}
reth = &ohdr->u.rc.reth;
hdrsize += sizeof(*reth);
qp->r_len = be32_to_cpu(reth->length);
qp->r_rcv_len = 0;
qp->r_sge.sg_list = NULL;
if (qp->r_len != 0) {
u32 rkey = be32_to_cpu(reth->rkey);
u64 vaddr = be64_to_cpu(reth->vaddr);
int ok;
/* Check rkey */
ok = qib_rkey_ok(qp, &qp->r_sge.sge, qp->r_len,
vaddr, rkey, IB_ACCESS_REMOTE_WRITE);
if (unlikely(!ok))
goto drop;
qp->r_sge.num_sge = 1;
} else {
qp->r_sge.num_sge = 0;
qp->r_sge.sge.mr = NULL;
qp->r_sge.sge.vaddr = NULL;
qp->r_sge.sge.length = 0;
qp->r_sge.sge.sge_length = 0;
}
if (opcode == OP(RDMA_WRITE_ONLY))
goto rdma_last;
else if (opcode == OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE)) {
wc.ex.imm_data = ohdr->u.rc.imm_data;
goto rdma_last_imm;
}
/* FALLTHROUGH */
case OP(RDMA_WRITE_MIDDLE):
/* Check for invalid length PMTU or posted rwqe len. */
if (unlikely(tlen != (hdrsize + pmtu + 4)))
goto drop;
qp->r_rcv_len += pmtu;
if (unlikely(qp->r_rcv_len > qp->r_len))
goto drop;
qib_copy_sge(&qp->r_sge, data, pmtu, 1);
break;
case OP(RDMA_WRITE_LAST_WITH_IMMEDIATE):
wc.ex.imm_data = ohdr->u.imm_data;
rdma_last_imm:
hdrsize += 4;
wc.wc_flags = IB_WC_WITH_IMM;
/* Get the number of bytes the message was padded by. */
pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
/* Check for invalid length. */
/* XXX LAST len should be >= 1 */
if (unlikely(tlen < (hdrsize + pad + 4)))
goto drop;
/* Don't count the CRC. */
tlen -= (hdrsize + pad + 4);
if (unlikely(tlen + qp->r_rcv_len != qp->r_len))
goto drop;
if (test_and_clear_bit(QIB_R_REWIND_SGE, &qp->r_aflags))
IB/qib: Avoid returning EBUSY from MR deregister A timing issue can occur where qib_mr_dereg can return -EBUSY if the MR use count is not zero. This can occur if the MR is de-registered while RDMA read response packets are being progressed from the SDMA ring. The suspicion is that the peer sent an RDMA read request, which has already been copied across to the peer. The peer sees the completion of his request and then communicates to the responder that the MR is not needed any longer. The responder tries to de-register the MR, catching some responses remaining in the SDMA ring holding the MR use count. The code now uses a get/put paradigm to track MR use counts and coordinates with the MR de-registration process using a completion when the count has reached zero. A timeout on the delay is in place to catch other EBUSY issues. The reference count protocol is as follows: - The return to the user counts as 1 - A reference from the lk_table or the qib_ibdev counts as 1. - Transient I/O operations increase/decrease as necessary A lot of code duplication has been folded into the new routines init_qib_mregion() and deinit_qib_mregion(). Additionally, explicit initialization of fields to zero is now handled by kzalloc(). Also, duplicated code 'while.*num_sge' that decrements reference counts have been consolidated in qib_put_ss(). Reviewed-by: Ramkrishna Vepa <ramkrishna.vepa@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-28 06:33:12 +08:00
qib_put_ss(&qp->s_rdma_read_sge);
else {
ret = qib_get_rwqe(qp, 1);
if (ret < 0)
goto op_err;
if (!ret)
goto drop;
}
wc.byte_len = qp->r_len;
wc.opcode = IB_WC_RECV_RDMA_WITH_IMM;
qib_copy_sge(&qp->r_sge, data, tlen, 1);
IB/qib: Avoid returning EBUSY from MR deregister A timing issue can occur where qib_mr_dereg can return -EBUSY if the MR use count is not zero. This can occur if the MR is de-registered while RDMA read response packets are being progressed from the SDMA ring. The suspicion is that the peer sent an RDMA read request, which has already been copied across to the peer. The peer sees the completion of his request and then communicates to the responder that the MR is not needed any longer. The responder tries to de-register the MR, catching some responses remaining in the SDMA ring holding the MR use count. The code now uses a get/put paradigm to track MR use counts and coordinates with the MR de-registration process using a completion when the count has reached zero. A timeout on the delay is in place to catch other EBUSY issues. The reference count protocol is as follows: - The return to the user counts as 1 - A reference from the lk_table or the qib_ibdev counts as 1. - Transient I/O operations increase/decrease as necessary A lot of code duplication has been folded into the new routines init_qib_mregion() and deinit_qib_mregion(). Additionally, explicit initialization of fields to zero is now handled by kzalloc(). Also, duplicated code 'while.*num_sge' that decrements reference counts have been consolidated in qib_put_ss(). Reviewed-by: Ramkrishna Vepa <ramkrishna.vepa@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-28 06:33:12 +08:00
qib_put_ss(&qp->r_sge);
goto last_imm;
case OP(RDMA_WRITE_LAST):
rdma_last:
/* Get the number of bytes the message was padded by. */
pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
/* Check for invalid length. */
/* XXX LAST len should be >= 1 */
if (unlikely(tlen < (hdrsize + pad + 4)))
goto drop;
/* Don't count the CRC. */
tlen -= (hdrsize + pad + 4);
if (unlikely(tlen + qp->r_rcv_len != qp->r_len))
goto drop;
qib_copy_sge(&qp->r_sge, data, tlen, 1);
IB/qib: Avoid returning EBUSY from MR deregister A timing issue can occur where qib_mr_dereg can return -EBUSY if the MR use count is not zero. This can occur if the MR is de-registered while RDMA read response packets are being progressed from the SDMA ring. The suspicion is that the peer sent an RDMA read request, which has already been copied across to the peer. The peer sees the completion of his request and then communicates to the responder that the MR is not needed any longer. The responder tries to de-register the MR, catching some responses remaining in the SDMA ring holding the MR use count. The code now uses a get/put paradigm to track MR use counts and coordinates with the MR de-registration process using a completion when the count has reached zero. A timeout on the delay is in place to catch other EBUSY issues. The reference count protocol is as follows: - The return to the user counts as 1 - A reference from the lk_table or the qib_ibdev counts as 1. - Transient I/O operations increase/decrease as necessary A lot of code duplication has been folded into the new routines init_qib_mregion() and deinit_qib_mregion(). Additionally, explicit initialization of fields to zero is now handled by kzalloc(). Also, duplicated code 'while.*num_sge' that decrements reference counts have been consolidated in qib_put_ss(). Reviewed-by: Ramkrishna Vepa <ramkrishna.vepa@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-28 06:33:12 +08:00
qib_put_ss(&qp->r_sge);
break;
default:
/* Drop packet for unknown opcodes. */
goto drop;
}
qp->r_psn++;
qp->r_state = opcode;
return;
rewind:
set_bit(QIB_R_REWIND_SGE, &qp->r_aflags);
qp->r_sge.num_sge = 0;
drop:
ibp->n_pkt_drops++;
return;
op_err:
qib_rc_error(qp, IB_WC_LOC_QP_OP_ERR);
return;
}