2012-05-21 20:18:06 +08:00
|
|
|
What: /sys/.../events/in_illuminance0_thresh_either_en
|
|
|
|
|
Date: April 2012
|
|
|
|
|
KernelVersion: 3.5
|
|
|
|
|
Contact: Johan Hovold <jhovold@gmail.com>
|
|
|
|
|
Description:
|
|
|
|
|
Event generated when channel passes one of the four thresholds
|
|
|
|
|
in each direction (rising|falling) and a zone change occurs.
|
|
|
|
|
The corresponding light zone can be read from
|
|
|
|
|
in_illuminance0_zone.
|
|
|
|
|
|
|
|
|
|
What: /sys/.../events/in_illuminance0_threshY_hysteresis
|
|
|
|
|
Date: May 2012
|
|
|
|
|
KernelVersion: 3.5
|
|
|
|
|
Contact: Johan Hovold <jhovold@gmail.com>
|
|
|
|
|
Description:
|
|
|
|
|
Get the hysteresis for thresholds Y, that is,
|
|
|
|
|
threshY_hysteresis = threshY_raising - threshY_falling
|
|
|
|
|
|
|
|
|
|
What: /sys/.../events/illuminance_threshY_falling_value
|
|
|
|
|
What: /sys/.../events/illuminance_threshY_raising_value
|
|
|
|
|
Date: April 2012
|
|
|
|
|
KernelVersion: 3.5
|
|
|
|
|
Contact: Johan Hovold <jhovold@gmail.com>
|
|
|
|
|
Description:
|
|
|
|
|
Specifies the value of threshold that the device is comparing
|
|
|
|
|
against for the events enabled by
|
|
|
|
|
in_illuminance0_thresh_either_en (0..255), where Y in 0..3.
|
|
|
|
|
|
|
|
|
|
Note that threshY_falling must be less than or equal to
|
|
|
|
|
threshY_raising.
|
|
|
|
|
|
|
|
|
|
These thresholds correspond to the eight zone-boundary
|
2012-06-16 01:25:24 +08:00
|
|
|
registers (boundaryY_{low,high}) and define the five light
|
2012-05-21 20:18:06 +08:00
|
|
|
zones.
|
|
|
|
|
|
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_zone
|
|
|
|
|
Date: April 2012
|
|
|
|
|
KernelVersion: 3.5
|
|
|
|
|
Contact: Johan Hovold <jhovold@gmail.com>
|
|
|
|
|
Description:
|
|
|
|
|
Get the current light zone (0..4) as defined by the
|
|
|
|
|
in_illuminance0_threshY_{falling,rising} thresholds.
|
|
|
|
|
|
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_currentY_raw
|
|
|
|
|
Date: May 2012
|
|
|
|
|
KernelVersion: 3.5
|
|
|
|
|
Contact: Johan Hovold <jhovold@gmail.com>
|
|
|
|
|
Description:
|
|
|
|
|
Get output current for channel Y (0..255), that is,
|
|
|
|
|
out_currentY_currentZ_raw, where Z is the current zone.
|
|
|
|
|
|
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_currentY_currentZ_raw
|
|
|
|
|
Date: May 2012
|
|
|
|
|
KernelVersion: 3.5
|
|
|
|
|
Contact: Johan Hovold <jhovold@gmail.com>
|
|
|
|
|
Description:
|
|
|
|
|
Set the output current for channel out_currentY when in zone
|
|
|
|
|
Z (0..255), where Y in 0..2 and Z in 0..4.
|
|
|
|
|
|
|
|
|
|
These values correspond to the ALS-mapper target registers for
|
|
|
|
|
ALS-mapper Y + 1.
|
