OpenCloudOS-Kernel/drivers/macintosh/macio_asic.c

793 lines
20 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Bus & driver management routines for devices within
* a MacIO ASIC. Interface to new driver model mostly
* stolen from the PCI version.
*
* Copyright (C) 2005 Ben. Herrenschmidt (benh@kernel.crashing.org)
*
* TODO:
*
* - Don't probe below media bay by default, but instead provide
* some hooks for media bay to dynamically add/remove it's own
* sub-devices.
*/
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <asm/machdep.h>
#include <asm/macio.h>
#include <asm/pmac_feature.h>
#undef DEBUG
#define MAX_NODE_NAME_SIZE (20 - 12)
static struct macio_chip *macio_on_hold;
static int macio_bus_match(struct device *dev, struct device_driver *drv)
{
const struct of_device_id * matches = drv->of_match_table;
if (!matches)
return 0;
return of_match_device(matches, dev) != NULL;
}
struct macio_dev *macio_dev_get(struct macio_dev *dev)
{
struct device *tmp;
if (!dev)
return NULL;
tmp = get_device(&dev->ofdev.dev);
if (tmp)
return to_macio_device(tmp);
else
return NULL;
}
void macio_dev_put(struct macio_dev *dev)
{
if (dev)
put_device(&dev->ofdev.dev);
}
static int macio_device_probe(struct device *dev)
{
int error = -ENODEV;
struct macio_driver *drv;
struct macio_dev *macio_dev;
const struct of_device_id *match;
drv = to_macio_driver(dev->driver);
macio_dev = to_macio_device(dev);
if (!drv->probe)
return error;
macio_dev_get(macio_dev);
match = of_match_device(drv->driver.of_match_table, dev);
if (match)
error = drv->probe(macio_dev, match);
if (error)
macio_dev_put(macio_dev);
return error;
}
bus: Make remove callback return void The driver core ignores the return value of this callback because there is only little it can do when a device disappears. This is the final bit of a long lasting cleanup quest where several buses were converted to also return void from their remove callback. Additionally some resource leaks were fixed that were caused by drivers returning an error code in the expectation that the driver won't go away. With struct bus_type::remove returning void it's prevented that newly implemented buses return an ignored error code and so don't anticipate wrong expectations for driver authors. Reviewed-by: Tom Rix <trix@redhat.com> (For fpga) Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio) Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts) Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb) Acked-by: Pali Rohár <pali@kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media) Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform) Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> (For xen) Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd) Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb) Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus) Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio) Acked-by: Maximilian Luz <luzmaximilian@gmail.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec) Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack) Acked-by: Geoff Levand <geoff@infradead.org> (For ps3) Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt) Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th) Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia) Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI) Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr) Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid) Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM) Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa) Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire) Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid) Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox) Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC) Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-14 03:35:22 +08:00
static void macio_device_remove(struct device *dev)
{
struct macio_dev * macio_dev = to_macio_device(dev);
struct macio_driver * drv = to_macio_driver(dev->driver);
if (dev->driver && drv->remove)
drv->remove(macio_dev);
macio_dev_put(macio_dev);
}
static void macio_device_shutdown(struct device *dev)
{
struct macio_dev * macio_dev = to_macio_device(dev);
struct macio_driver * drv = to_macio_driver(dev->driver);
if (dev->driver && drv->shutdown)
drv->shutdown(macio_dev);
}
static int macio_device_suspend(struct device *dev, pm_message_t state)
{
struct macio_dev * macio_dev = to_macio_device(dev);
struct macio_driver * drv = to_macio_driver(dev->driver);
if (dev->driver && drv->suspend)
return drv->suspend(macio_dev, state);
return 0;
}
static int macio_device_resume(struct device * dev)
{
struct macio_dev * macio_dev = to_macio_device(dev);
struct macio_driver * drv = to_macio_driver(dev->driver);
if (dev->driver && drv->resume)
return drv->resume(macio_dev);
return 0;
}
extern const struct attribute_group *macio_dev_groups[];
struct bus_type macio_bus_type = {
.name = "macio",
.match = macio_bus_match,
.uevent = of_device_uevent_modalias,
.probe = macio_device_probe,
.remove = macio_device_remove,
.shutdown = macio_device_shutdown,
.suspend = macio_device_suspend,
.resume = macio_device_resume,
.dev_groups = macio_dev_groups,
};
static int __init macio_bus_driver_init(void)
{
return bus_register(&macio_bus_type);
}
postcore_initcall(macio_bus_driver_init);
/**
* macio_release_dev - free a macio device structure when all users of it are
* finished.
* @dev: device that's been disconnected
*
* Will be called only by the device core when all users of this macio device
* are done. This currently means never as we don't hot remove any macio
* device yet, though that will happen with mediabay based devices in a later
* implementation.
*/
static void macio_release_dev(struct device *dev)
{
struct macio_dev *mdev;
mdev = to_macio_device(dev);
kfree(mdev);
}
/**
* macio_resource_quirks - tweak or skip some resources for a device
* @np: pointer to the device node
* @res: resulting resource
* @index: index of resource in node
*
* If this routine returns non-null, then the resource is completely
* skipped.
*/
static int macio_resource_quirks(struct device_node *np, struct resource *res,
int index)
{
2006-07-03 19:36:01 +08:00
/* Only quirks for memory resources for now */
if ((res->flags & IORESOURCE_MEM) == 0)
return 0;
/* Grand Central has too large resource 0 on some machines */
if (index == 0 && of_node_name_eq(np, "gc"))
2006-07-03 19:36:01 +08:00
res->end = res->start + 0x1ffff;
2006-07-03 19:36:01 +08:00
/* Airport has bogus resource 2 */
if (index >= 2 && of_node_name_eq(np, "radio"))
2006-07-03 19:36:01 +08:00
return 1;
#ifndef CONFIG_PPC64
2006-07-03 19:36:01 +08:00
/* DBDMAs may have bogus sizes */
if ((res->start & 0x0001f000) == 0x00008000)
res->end = res->start + 0xff;
#endif /* CONFIG_PPC64 */
2006-07-03 19:36:01 +08:00
/* ESCC parent eats child resources. We could have added a
* level of hierarchy, but I don't really feel the need
* for it
*/
if (of_node_name_eq(np, "escc"))
2006-07-03 19:36:01 +08:00
return 1;
/* ESCC has bogus resources >= 3 */
if (index >= 3 && (of_node_name_eq(np, "ch-a") ||
of_node_name_eq(np, "ch-b")))
2006-07-03 19:36:01 +08:00
return 1;
/* Media bay has too many resources, keep only first one */
if (index > 0 && of_node_name_eq(np, "media-bay"))
2006-07-03 19:36:01 +08:00
return 1;
/* Some older IDE resources have bogus sizes */
if (of_node_name_eq(np, "IDE") || of_node_name_eq(np, "ATA") ||
of_node_is_type(np, "ide") || of_node_is_type(np, "ata")) {
2006-07-03 19:36:01 +08:00
if (index == 0 && (res->end - res->start) > 0xfff)
res->end = res->start + 0xfff;
if (index == 1 && (res->end - res->start) > 0xff)
res->end = res->start + 0xff;
}
return 0;
}
2006-07-03 19:36:01 +08:00
static void macio_create_fixup_irq(struct macio_dev *dev, int index,
unsigned int line)
{
unsigned int irq;
[PATCH] powerpc: fix trigger handling in the new irq code This patch slightly reworks the new irq code to fix a small design error. I removed the passing of the trigger to the map() calls entirely, it was not a good idea to have one call do two different things. It also fixes a couple of corner cases. Mapping a linux virtual irq to a physical irq now does only that. Setting the trigger is a different action which has a different call. The main changes are: - I no longer call host->ops->map() for an already mapped irq, I just return the virtual number that was already mapped. It was called before to give an opportunity to change the trigger, but that was causing issues as that could happen while the interrupt was in use by a device, and because of the trigger change, map would potentially muck around with things in a racy way. That was causing much burden on a given's controller implementation of map() to get it right. This is much simpler now. map() is only called on the initial mapping of an irq, meaning that you know that this irq is _not_ being used. You can initialize the hardware if you want (though you don't have to). - Controllers that can handle different type of triggers (level/edge/etc...) now implement the standard irq_chip->set_type() call as defined by the generic code. That means that you can use the standard set_irq_type() to configure an irq line manually if you wish or (though I don't like that interface), pass explicit trigger flags to request_irq() as defined by the generic kernel interfaces. Also, using those interfaces guarantees that your controller set_type callback is called with the descriptor lock held, thus providing locking against activity on the same interrupt (including mask/unmask/etc...) automatically. A result is that, for example, MPIC's own map() implementation calls irq_set_type(NONE) to configure the hardware to the default triggers. - To allow the above, the irq_map array entry for the new mapped interrupt is now set before map() callback is called for the controller. - The irq_create_of_mapping() (also used by irq_of_parse_and_map()) function for mapping interrupts from the device-tree now also call the separate set_irq_type(), and only does so if there is a change in the trigger type. - While I was at it, I changed pci_read_irq_line() (which is the helper I would expect most archs to use in their pcibios_fixup() to get the PCI interrupt routing from the device tree) to also handle a fallback when the DT mapping fails consisting of reading the PCI_INTERRUPT_PIN to know wether the device has an interrupt at all, and the the PCI_INTERRUPT_LINE to get an interrupt number from the device. That number is then mapped using the default controller, and the trigger is set to level low. That default behaviour works for several platforms that don't have a proper interrupt tree like Pegasos. If it doesn't work for your platform, then either provide a proper interrupt tree from the firmware so that fallback isn't needed, or don't call pci_read_irq_line() - Add back a bit that got dropped by my main rework patch for properly clearing pending IPIs on pSeries when using a kexec Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 19:44:42 +08:00
irq = irq_create_mapping(NULL, line);
if (!irq) {
2006-07-03 19:36:01 +08:00
dev->interrupt[index].start = irq;
dev->interrupt[index].flags = IORESOURCE_IRQ;
dev->interrupt[index].name = dev_name(&dev->ofdev.dev);
2006-07-03 19:36:01 +08:00
}
if (dev->n_interrupts <= index)
dev->n_interrupts = index + 1;
}
static void macio_add_missing_resources(struct macio_dev *dev)
{
struct device_node *np = dev->ofdev.dev.of_node;
2006-07-03 19:36:01 +08:00
unsigned int irq_base;
/* Gatwick has some missing interrupts on child nodes */
if (dev->bus->chip->type != macio_gatwick)
return;
2006-07-03 19:36:01 +08:00
/* irq_base is always 64 on gatwick. I have no cleaner way to get
* that value from here at this point
*/
2006-07-03 19:36:01 +08:00
irq_base = 64;
/* Fix SCC */
if (of_node_name_eq(np, "ch-a")) {
2006-07-03 19:36:01 +08:00
macio_create_fixup_irq(dev, 0, 15 + irq_base);
macio_create_fixup_irq(dev, 1, 4 + irq_base);
macio_create_fixup_irq(dev, 2, 5 + irq_base);
printk(KERN_INFO "macio: fixed SCC irqs on gatwick\n");
}
/* Fix media-bay */
if (of_node_name_eq(np, "media-bay")) {
2006-07-03 19:36:01 +08:00
macio_create_fixup_irq(dev, 0, 29 + irq_base);
printk(KERN_INFO "macio: fixed media-bay irq on gatwick\n");
}
/* Fix left media bay childs */
if (dev->media_bay != NULL && of_node_name_eq(np, "floppy")) {
2006-07-03 19:36:01 +08:00
macio_create_fixup_irq(dev, 0, 19 + irq_base);
macio_create_fixup_irq(dev, 1, 1 + irq_base);
printk(KERN_INFO "macio: fixed left floppy irqs\n");
}
if (dev->media_bay != NULL && of_node_name_eq(np, "ata4")) {
2006-07-03 19:36:01 +08:00
macio_create_fixup_irq(dev, 0, 14 + irq_base);
macio_create_fixup_irq(dev, 0, 3 + irq_base);
printk(KERN_INFO "macio: fixed left ide irqs\n");
}
}
static void macio_setup_interrupts(struct macio_dev *dev)
{
struct device_node *np = dev->ofdev.dev.of_node;
2006-07-03 19:36:01 +08:00
unsigned int irq;
int i = 0, j = 0;
for (;;) {
struct resource *res;
if (j >= MACIO_DEV_COUNT_IRQS)
break;
res = &dev->interrupt[j];
2006-07-03 19:36:01 +08:00
irq = irq_of_parse_and_map(np, i++);
if (!irq)
2006-07-03 19:36:01 +08:00
break;
res->start = irq;
res->flags = IORESOURCE_IRQ;
res->name = dev_name(&dev->ofdev.dev);
2006-07-03 19:36:01 +08:00
if (macio_resource_quirks(np, res, i - 1)) {
memset(res, 0, sizeof(struct resource));
2006-07-03 19:36:01 +08:00
continue;
} else
j++;
}
dev->n_interrupts = j;
}
static void macio_setup_resources(struct macio_dev *dev,
struct resource *parent_res)
{
struct device_node *np = dev->ofdev.dev.of_node;
struct resource r;
int index;
for (index = 0; of_address_to_resource(np, index, &r) == 0; index++) {
struct resource *res;
if (index >= MACIO_DEV_COUNT_RESOURCES)
break;
res = &dev->resource[index];
*res = r;
res->name = dev_name(&dev->ofdev.dev);
if (macio_resource_quirks(np, res, index)) {
memset(res, 0, sizeof(struct resource));
continue;
}
/* Currently, we consider failure as harmless, this may
* change in the future, once I've found all the device
* tree bugs in older machines & worked around them
*/
if (insert_resource(parent_res, res)) {
printk(KERN_WARNING "Can't request resource "
"%d for MacIO device %s\n",
index, dev_name(&dev->ofdev.dev));
}
}
dev->n_resources = index;
}
/**
* macio_add_one_device - Add one device from OF node to the device tree
* @chip: pointer to the macio_chip holding the device
* @np: pointer to the device node in the OF tree
* @in_bay: set to 1 if device is part of a media-bay
*
* When media-bay is changed to hotswap drivers, this function will
* be exposed to the bay driver some way...
*/
static struct macio_dev * macio_add_one_device(struct macio_chip *chip,
struct device *parent,
struct device_node *np,
struct macio_dev *in_bay,
struct resource *parent_res)
{
char name[MAX_NODE_NAME_SIZE + 1];
struct macio_dev *dev;
const u32 *reg;
if (np == NULL)
return NULL;
2007-07-19 16:49:03 +08:00
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return NULL;
dev->bus = &chip->lbus;
dev->media_bay = in_bay;
dev->ofdev.dev.of_node = np;
dev->ofdev.archdata.dma_mask = 0xffffffffUL;
dev->ofdev.dev.dma_mask = &dev->ofdev.archdata.dma_mask;
dev->ofdev.dev.coherent_dma_mask = dev->ofdev.archdata.dma_mask;
dev->ofdev.dev.parent = parent;
dev->ofdev.dev.bus = &macio_bus_type;
dev->ofdev.dev.release = macio_release_dev;
dev->ofdev.dev.dma_parms = &dev->dma_parms;
/* Standard DMA paremeters */
dma_set_max_seg_size(&dev->ofdev.dev, 65536);
dma_set_seg_boundary(&dev->ofdev.dev, 0xffffffff);
#if defined(CONFIG_PCI) && defined(CONFIG_DMA_OPS)
/* Set the DMA ops to the ones from the PCI device, this could be
* fishy if we didn't know that on PowerMac it's always direct ops
* or iommu ops that will work fine
*
* To get all the fields, copy all archdata
*/
dev->ofdev.dev.archdata = chip->lbus.pdev->dev.archdata;
powerpc/pmac: Fix crash in dma-mapping.h with NULL dma_ops Commit 5657933dbb6e ("treewide: Move dma_ops from struct dev_archdata into struct device") introduced a crash for macio devices, an example backtrace being: kernel BUG at ./include/linux/dma-mapping.h:465! Oops: Exception in kernel mode, sig: 5 [#1] ... NIP [c031ddb0] dmam_alloc_coherent+0x74/0x140 LR [c031de70] dmam_alloc_coherent+0x134/0x140 Call Trace: dmam_alloc_coherent+0x134/0x140 (unreliable) pata_macio_port_start+0x3c/0x8c ata_host_start.part.5+0xfc/0x208 ata_host_activate+0x128/0x154 pata_macio_common_init+0x2f0/0x538 pata_macio_attach+0xd8/0x180 macio_device_probe+0x5c/0xec driver_probe_device+0x21c/0x314 __driver_attach+0xcc/0xd0 bus_for_each_dev+0x68/0xb4 bus_add_driver+0x1dc/0x244 driver_register+0x88/0x130 pata_macio_init+0x5c/0x88 do_one_initcall+0x40/0x170 kernel_init_freeable+0x134/0x1d0 kernel_init+0x18/0x110 ret_from_kernel_thread+0x5c/0x64 This was caused by the device having NULL dma_ops, triggering the BUG_ON(). Previously the device inherited its dma_ops via the assignment to dev->ofdev.dev.archdata. However after commit 5657933dbb6e the dma_ops are moved into dev->ofdev.dev, and so they need to be explicitly copied. Fixes: 5657933dbb6e ("treewide: Move dma_ops from struct dev_archdata into struct device") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Rewrite change log, add backtrace] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-10 10:33:51 +08:00
dev->ofdev.dev.dma_ops = chip->lbus.pdev->dev.dma_ops;
#endif /* CONFIG_PCI && CONFIG_DMA_OPS */
#ifdef DEBUG
printk("preparing mdev @%p, ofdev @%p, dev @%p, kobj @%p\n",
dev, &dev->ofdev, &dev->ofdev.dev, &dev->ofdev.dev.kobj);
#endif
/* MacIO itself has a different reg, we use it's PCI base */
snprintf(name, sizeof(name), "%pOFn", np);
if (np == chip->of_node) {
dev_set_name(&dev->ofdev.dev, "%1d.%08x:%.*s",
chip->lbus.index,
#ifdef CONFIG_PCI
(unsigned int)pci_resource_start(chip->lbus.pdev, 0),
#else
0, /* NuBus may want to do something better here */
#endif
MAX_NODE_NAME_SIZE, name);
} else {
reg = of_get_property(np, "reg", NULL);
dev_set_name(&dev->ofdev.dev, "%1d.%08x:%.*s",
chip->lbus.index,
reg ? *reg : 0, MAX_NODE_NAME_SIZE, name);
}
/* Setup interrupts & resources */
macio_setup_interrupts(dev);
macio_setup_resources(dev, parent_res);
2006-07-03 19:36:01 +08:00
macio_add_missing_resources(dev);
/* Register with core */
if (of_device_register(&dev->ofdev) != 0) {
printk(KERN_DEBUG"macio: device registration error for %s!\n",
dev_name(&dev->ofdev.dev));
kfree(dev);
return NULL;
}
return dev;
}
static int macio_skip_device(struct device_node *np)
{
return of_node_name_prefix(np, "battery") ||
of_node_name_prefix(np, "escc-legacy");
}
/**
* macio_pci_add_devices - Adds sub-devices of mac-io to the device tree
* @chip: pointer to the macio_chip holding the devices
*
* This function will do the job of extracting devices from the
* Open Firmware device tree, build macio_dev structures and add
* them to the Linux device tree.
*
* For now, childs of media-bay are added now as well. This will
* change rsn though.
*/
static void macio_pci_add_devices(struct macio_chip *chip)
{
struct device_node *np, *pnode;
struct macio_dev *rdev, *mdev, *mbdev = NULL, *sdev = NULL;
struct device *parent = NULL;
struct resource *root_res = &iomem_resource;
/* Add a node for the macio bus itself */
#ifdef CONFIG_PCI
if (chip->lbus.pdev) {
parent = &chip->lbus.pdev->dev;
root_res = &chip->lbus.pdev->resource[0];
}
#endif
pnode = of_node_get(chip->of_node);
if (pnode == NULL)
return;
/* Add macio itself to hierarchy */
rdev = macio_add_one_device(chip, parent, pnode, NULL, root_res);
if (rdev == NULL)
return;
root_res = &rdev->resource[0];
/* First scan 1st level */
for_each_child_of_node(pnode, np) {
if (macio_skip_device(np))
continue;
of_node_get(np);
mdev = macio_add_one_device(chip, &rdev->ofdev.dev, np, NULL,
root_res);
if (mdev == NULL)
of_node_put(np);
else if (of_node_name_prefix(np, "media-bay"))
mbdev = mdev;
else if (of_node_name_prefix(np, "escc"))
sdev = mdev;
}
/* Add media bay devices if any */
if (mbdev) {
pnode = mbdev->ofdev.dev.of_node;
for_each_child_of_node(pnode, np) {
if (macio_skip_device(np))
continue;
of_node_get(np);
if (macio_add_one_device(chip, &mbdev->ofdev.dev, np,
mbdev, root_res) == NULL)
of_node_put(np);
}
}
/* Add serial ports if any */
if (sdev) {
pnode = sdev->ofdev.dev.of_node;
for_each_child_of_node(pnode, np) {
if (macio_skip_device(np))
continue;
of_node_get(np);
if (macio_add_one_device(chip, &sdev->ofdev.dev, np,
NULL, root_res) == NULL)
of_node_put(np);
}
}
}
/**
* macio_register_driver - Registers a new MacIO device driver
* @drv: pointer to the driver definition structure
*/
int macio_register_driver(struct macio_driver *drv)
{
/* initialize common driver fields */
drv->driver.bus = &macio_bus_type;
/* register with core */
return driver_register(&drv->driver);
}
/**
* macio_unregister_driver - Unregisters a new MacIO device driver
* @drv: pointer to the driver definition structure
*/
void macio_unregister_driver(struct macio_driver *drv)
{
driver_unregister(&drv->driver);
}
/* Managed MacIO resources */
struct macio_devres {
u32 res_mask;
};
static void maciom_release(struct device *gendev, void *res)
{
struct macio_dev *dev = to_macio_device(gendev);
struct macio_devres *dr = res;
int i, max;
max = min(dev->n_resources, 32);
for (i = 0; i < max; i++) {
if (dr->res_mask & (1 << i))
macio_release_resource(dev, i);
}
}
int macio_enable_devres(struct macio_dev *dev)
{
struct macio_devres *dr;
dr = devres_find(&dev->ofdev.dev, maciom_release, NULL, NULL);
if (!dr) {
dr = devres_alloc(maciom_release, sizeof(*dr), GFP_KERNEL);
if (!dr)
return -ENOMEM;
}
return devres_get(&dev->ofdev.dev, dr, NULL, NULL) != NULL;
}
static struct macio_devres * find_macio_dr(struct macio_dev *dev)
{
return devres_find(&dev->ofdev.dev, maciom_release, NULL, NULL);
}
/**
* macio_request_resource - Request an MMIO resource
* @dev: pointer to the device holding the resource
* @resource_no: resource number to request
* @name: resource name
*
* Mark memory region number @resource_no associated with MacIO
* device @dev as being reserved by owner @name. Do not access
* any address inside the memory regions unless this call returns
* successfully.
*
* Returns 0 on success, or %EBUSY on error. A warning
* message is also printed on failure.
*/
int macio_request_resource(struct macio_dev *dev, int resource_no,
const char *name)
{
struct macio_devres *dr = find_macio_dr(dev);
if (macio_resource_len(dev, resource_no) == 0)
return 0;
if (!request_mem_region(macio_resource_start(dev, resource_no),
macio_resource_len(dev, resource_no),
name))
goto err_out;
if (dr && resource_no < 32)
dr->res_mask |= 1 << resource_no;
return 0;
err_out:
printk (KERN_WARNING "MacIO: Unable to reserve resource #%d:%lx@%lx"
" for device %s\n",
resource_no,
macio_resource_len(dev, resource_no),
macio_resource_start(dev, resource_no),
dev_name(&dev->ofdev.dev));
return -EBUSY;
}
/**
* macio_release_resource - Release an MMIO resource
* @dev: pointer to the device holding the resource
* @resource_no: resource number to release
*/
void macio_release_resource(struct macio_dev *dev, int resource_no)
{
struct macio_devres *dr = find_macio_dr(dev);
if (macio_resource_len(dev, resource_no) == 0)
return;
release_mem_region(macio_resource_start(dev, resource_no),
macio_resource_len(dev, resource_no));
if (dr && resource_no < 32)
dr->res_mask &= ~(1 << resource_no);
}
/**
* macio_request_resources - Reserve all memory resources
* @dev: MacIO device whose resources are to be reserved
* @name: Name to be associated with resource.
*
* Mark all memory regions associated with MacIO device @dev as
* being reserved by owner @name. Do not access any address inside
* the memory regions unless this call returns successfully.
*
* Returns 0 on success, or %EBUSY on error. A warning
* message is also printed on failure.
*/
int macio_request_resources(struct macio_dev *dev, const char *name)
{
int i;
for (i = 0; i < dev->n_resources; i++)
if (macio_request_resource(dev, i, name))
goto err_out;
return 0;
err_out:
while(--i >= 0)
macio_release_resource(dev, i);
return -EBUSY;
}
/**
* macio_release_resources - Release reserved memory resources
* @dev: MacIO device whose resources were previously reserved
*/
void macio_release_resources(struct macio_dev *dev)
{
int i;
for (i = 0; i < dev->n_resources; i++)
macio_release_resource(dev, i);
}
#ifdef CONFIG_PCI
static int macio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct device_node* np;
struct macio_chip* chip;
if (ent->vendor != PCI_VENDOR_ID_APPLE)
return -ENODEV;
/* Note regarding refcounting: We assume pci_device_to_OF_node() is
* ported to new OF APIs and returns a node with refcount incremented.
*/
np = pci_device_to_OF_node(pdev);
if (np == NULL)
return -ENODEV;
/* The above assumption is wrong !!!
* fix that here for now until I fix the arch code
*/
of_node_get(np);
/* We also assume that pmac_feature will have done a get() on nodes
* stored in the macio chips array
*/
chip = macio_find(np, macio_unknown);
of_node_put(np);
if (chip == NULL)
return -ENODEV;
/* XXX Need locking ??? */
if (chip->lbus.pdev == NULL) {
chip->lbus.pdev = pdev;
chip->lbus.chip = chip;
pci_set_drvdata(pdev, &chip->lbus);
pci_set_master(pdev);
}
printk(KERN_INFO "MacIO PCI driver attached to %s chipset\n",
chip->name);
/*
* HACK ALERT: The WallStreet PowerBook and some OHare based machines
* have 2 macio ASICs. I must probe the "main" one first or IDE
* ordering will be incorrect. So I put on "hold" the second one since
* it seem to appear first on PCI
*/
if (chip->type == macio_gatwick || chip->type == macio_ohareII)
if (macio_chips[0].lbus.pdev == NULL) {
macio_on_hold = chip;
return 0;
}
macio_pci_add_devices(chip);
if (macio_on_hold && macio_chips[0].lbus.pdev != NULL) {
macio_pci_add_devices(macio_on_hold);
macio_on_hold = NULL;
}
return 0;
}
static void macio_pci_remove(struct pci_dev* pdev)
{
panic("removing of macio-asic not supported !\n");
}
/*
* MacIO is matched against any Apple ID, it's probe() function
* will then decide wether it applies or not
*/
static const struct pci_device_id pci_ids[] = { {
.vendor = PCI_VENDOR_ID_APPLE,
.device = PCI_ANY_ID,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
}, { /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE (pci, pci_ids);
/* pci driver glue; this is a "new style" PCI driver module */
static struct pci_driver macio_pci_driver = {
.name = "macio",
.id_table = pci_ids,
.probe = macio_pci_probe,
.remove = macio_pci_remove,
};
#endif /* CONFIG_PCI */
static int __init macio_module_init (void)
{
#ifdef CONFIG_PCI
int rc;
rc = pci_register_driver(&macio_pci_driver);
if (rc)
return rc;
#endif /* CONFIG_PCI */
return 0;
}
module_init(macio_module_init);
EXPORT_SYMBOL(macio_register_driver);
EXPORT_SYMBOL(macio_unregister_driver);
EXPORT_SYMBOL(macio_dev_get);
EXPORT_SYMBOL(macio_dev_put);
EXPORT_SYMBOL(macio_request_resource);
EXPORT_SYMBOL(macio_release_resource);
EXPORT_SYMBOL(macio_request_resources);
EXPORT_SYMBOL(macio_release_resources);
EXPORT_SYMBOL(macio_enable_devres);