OpenCloudOS-Kernel/include/linux/msi.h

602 lines
20 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef LINUX_MSI_H
#define LINUX_MSI_H
/*
* This header file contains MSI data structures and functions which are
* only relevant for:
* - Interrupt core code
* - PCI/MSI core code
* - MSI interrupt domain implementations
* - IOMMU, low level VFIO, NTB and other justified exceptions
* dealing with low level MSI details.
*
* Regular device drivers have no business with any of these functions and
* especially storing MSI descriptor pointers in random code is considered
* abuse.
*
* Device driver relevant functions are available in <linux/msi_api.h>
*/
#include <linux/irqdomain_defs.h>
#include <linux/cpumask.h>
#include <linux/msi_api.h>
#include <linux/xarray.h>
#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/bits.h>
#include <asm/msi.h>
/* Dummy shadow structures if an architecture does not define them */
#ifndef arch_msi_msg_addr_lo
typedef struct arch_msi_msg_addr_lo {
u32 address_lo;
} __attribute__ ((packed)) arch_msi_msg_addr_lo_t;
#endif
#ifndef arch_msi_msg_addr_hi
typedef struct arch_msi_msg_addr_hi {
u32 address_hi;
} __attribute__ ((packed)) arch_msi_msg_addr_hi_t;
#endif
#ifndef arch_msi_msg_data
typedef struct arch_msi_msg_data {
u32 data;
} __attribute__ ((packed)) arch_msi_msg_data_t;
#endif
/**
* msi_msg - Representation of a MSI message
* @address_lo: Low 32 bits of msi message address
* @arch_addrlo: Architecture specific shadow of @address_lo
* @address_hi: High 32 bits of msi message address
* (only used when device supports it)
* @arch_addrhi: Architecture specific shadow of @address_hi
* @data: MSI message data (usually 16 bits)
* @arch_data: Architecture specific shadow of @data
*/
struct msi_msg {
union {
u32 address_lo;
arch_msi_msg_addr_lo_t arch_addr_lo;
};
union {
u32 address_hi;
arch_msi_msg_addr_hi_t arch_addr_hi;
};
union {
u32 data;
arch_msi_msg_data_t arch_data;
};
};
extern int pci_msi_ignore_mask;
/* Helper functions */
struct irq_data;
struct msi_desc;
struct pci_dev;
drivers/base: Add MSI domain support for non-PCI devices With the msi_list and the msi_domain properties now being at the generic device level, it is starting to be relatively easy to offer a generic way of providing non-PCI MSIs. The two major hurdles with this idea are: - Lack of global ID that identifies a device: this is worked around by having a global ID allocator for each device that gets enrolled in the platform MSI subsystem - Lack of standard way to write the message in the generating device. This is solved by mandating driver code to provide a write_msg callback, so that everyone can have their own square wheel Apart from that, the API is fairly straightforward: - platform_msi_create_irq_domain creates an MSI domain that gets tagged with DOMAIN_BUS_PLATFORM_MSI - platform_msi_domain_alloc_irqs allocate MSIs for a given device, populating the msi_list - platform_msi_domain_free_irqs does what is written on the tin [ tglx: Created a seperate struct platform_msi_desc and added kerneldoc entries ] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-10-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-28 21:46:16 +08:00
struct platform_msi_priv_data;
struct device_attribute;
genirq/msi: Add pointers for per device irq domains With the upcoming per device MSI interrupt domain support it is necessary to store the domain pointers per device. Instead of delegating that storage to device drivers or subsystems add a domain pointer to the msi_dev_domain array in struct msi_device_data. This pointer is also used to take care of tearing down the irq domains when msi_device_data is cleaned up via devres. The interfaces into the MSI core will be changed from irqdomain pointer based interfaces to domain id based interfaces to support multiple MSI domains on a single device (e.g. PCI/MSI[-X] and PCI/IMS. Once the per device domain support is complete the irq domain pointer in struct device::msi.domain will not longer contain a pointer to the "global" MSI domain. It will contain a pointer to the MSI parent domain instead. It would be a horrible maze of conditionals to evaluate all over the place which domain pointer should be used, i.e. the "global" one in device::msi::domain or one from the internal pointer array. To avoid this evaluate in msi_setup_device_data() whether the irq domain which is associated to a device is a "global" or a parent MSI domain. If it is global then copy the pointer into the first entry of the msi_dev_domain array. This allows to convert interfaces and implementation to domain ids while keeping everything existing working. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221124230313.923860399@linutronix.de
2022-11-25 07:24:22 +08:00
struct irq_domain;
void __get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
#ifdef CONFIG_GENERIC_MSI_IRQ
void get_cached_msi_msg(unsigned int irq, struct msi_msg *msg);
#else
static inline void get_cached_msi_msg(unsigned int irq, struct msi_msg *msg) { }
#endif
drivers/base: Add MSI domain support for non-PCI devices With the msi_list and the msi_domain properties now being at the generic device level, it is starting to be relatively easy to offer a generic way of providing non-PCI MSIs. The two major hurdles with this idea are: - Lack of global ID that identifies a device: this is worked around by having a global ID allocator for each device that gets enrolled in the platform MSI subsystem - Lack of standard way to write the message in the generating device. This is solved by mandating driver code to provide a write_msg callback, so that everyone can have their own square wheel Apart from that, the API is fairly straightforward: - platform_msi_create_irq_domain creates an MSI domain that gets tagged with DOMAIN_BUS_PLATFORM_MSI - platform_msi_domain_alloc_irqs allocate MSIs for a given device, populating the msi_list - platform_msi_domain_free_irqs does what is written on the tin [ tglx: Created a seperate struct platform_msi_desc and added kerneldoc entries ] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-10-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-28 21:46:16 +08:00
typedef void (*irq_write_msi_msg_t)(struct msi_desc *desc,
struct msi_msg *msg);
/**
* pci_msi_desc - PCI/MSI specific MSI descriptor data
*
* @msi_mask: [PCI MSI] MSI cached mask bits
* @msix_ctrl: [PCI MSI-X] MSI-X cached per vector control bits
* @is_msix: [PCI MSI/X] True if MSI-X
* @multiple: [PCI MSI/X] log2 num of messages allocated
* @multi_cap: [PCI MSI/X] log2 num of messages supported
* @can_mask: [PCI MSI/X] Masking supported?
* @is_64: [PCI MSI/X] Address size: 0=32bit 1=64bit
* @default_irq:[PCI MSI/X] The default pre-assigned non-MSI irq
* @mask_pos: [PCI MSI] Mask register position
* @mask_base: [PCI MSI-X] Mask register base address
*/
struct pci_msi_desc {
union {
u32 msi_mask;
u32 msix_ctrl;
};
struct {
u8 is_msix : 1;
u8 multiple : 3;
u8 multi_cap : 3;
u8 can_mask : 1;
u8 is_64 : 1;
u8 is_virtual : 1;
unsigned default_irq;
} msi_attrib;
union {
u8 mask_pos;
void __iomem *mask_base;
};
};
#define MSI_MAX_INDEX ((unsigned int)USHRT_MAX)
/**
* struct msi_desc - Descriptor structure for MSI based interrupts
* @irq: The base interrupt number
* @nvec_used: The number of vectors used
* @dev: Pointer to the device which uses this descriptor
* @msg: The last set MSI message cached for reuse
* @affinity: Optional pointer to a cpu affinity mask for this descriptor
* @sysfs_attr: Pointer to sysfs device attribute
*
* @write_msi_msg: Callback that may be called when the MSI message
* address or data changes
* @write_msi_msg_data: Data parameter for the callback.
*
* @msi_index: Index of the msi descriptor
* @pci: PCI specific msi descriptor data
*/
struct msi_desc {
/* Shared device/bus type independent data */
unsigned int irq;
unsigned int nvec_used;
struct device *dev;
struct msi_msg msg;
genirq/core: Introduce struct irq_affinity_desc The interrupt affinity management uses straight cpumask pointers to convey the automatically assigned affinity masks for managed interrupts. The core interrupt descriptor allocation also decides based on the pointer being non NULL whether an interrupt is managed or not. Devices which use managed interrupts usually have two classes of interrupts: - Interrupts for multiple device queues - Interrupts for general device management Currently both classes are treated the same way, i.e. as managed interrupts. The general interrupts get the default affinity mask assigned while the device queue interrupts are spread out over the possible CPUs. Treating the general interrupts as managed is both a limitation and under certain circumstances a bug. Assume the following situation: default_irq_affinity = 4..7 So if CPUs 4-7 are offlined, then the core code will shut down the device management interrupts because the last CPU in their affinity mask went offline. It's also a limitation because it's desired to allow manual placement of the general device interrupts for various reasons. If they are marked managed then the interrupt affinity setting from both user and kernel space is disabled. To remedy that situation it's required to convey more information than the cpumasks through various interfaces related to interrupt descriptor allocation. Instead of adding yet another argument, create a new data structure 'irq_affinity_desc' which for now just contains the cpumask. This struct can be expanded to convey auxilliary information in the next step. No functional change, just preparatory work. [ tglx: Simplified logic and clarified changelog ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Dou Liyang <douliyangs@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-pci@vger.kernel.org Cc: kashyap.desai@broadcom.com Cc: shivasharan.srikanteshwara@broadcom.com Cc: sumit.saxena@broadcom.com Cc: ming.lei@redhat.com Cc: hch@lst.de Cc: douliyang1@huawei.com Link: https://lkml.kernel.org/r/20181204155122.6327-2-douliyangs@gmail.com
2018-12-04 23:51:20 +08:00
struct irq_affinity_desc *affinity;
#ifdef CONFIG_IRQ_MSI_IOMMU
const void *iommu_cookie;
#endif
#ifdef CONFIG_SYSFS
struct device_attribute *sysfs_attrs;
#endif
void (*write_msi_msg)(struct msi_desc *entry, void *data);
void *write_msi_msg_data;
u16 msi_index;
struct pci_msi_desc pci;
};
/*
* Filter values for the MSI descriptor iterators and accessor functions.
*/
enum msi_desc_filter {
/* All descriptors */
MSI_DESC_ALL,
/* Descriptors which have no interrupt associated */
MSI_DESC_NOTASSOCIATED,
/* Descriptors which have an interrupt associated */
MSI_DESC_ASSOCIATED,
};
/**
* struct msi_dev_domain - The internals of MSI domain info per device
* @store: Xarray for storing MSI descriptor pointers
genirq/msi: Add pointers for per device irq domains With the upcoming per device MSI interrupt domain support it is necessary to store the domain pointers per device. Instead of delegating that storage to device drivers or subsystems add a domain pointer to the msi_dev_domain array in struct msi_device_data. This pointer is also used to take care of tearing down the irq domains when msi_device_data is cleaned up via devres. The interfaces into the MSI core will be changed from irqdomain pointer based interfaces to domain id based interfaces to support multiple MSI domains on a single device (e.g. PCI/MSI[-X] and PCI/IMS. Once the per device domain support is complete the irq domain pointer in struct device::msi.domain will not longer contain a pointer to the "global" MSI domain. It will contain a pointer to the MSI parent domain instead. It would be a horrible maze of conditionals to evaluate all over the place which domain pointer should be used, i.e. the "global" one in device::msi::domain or one from the internal pointer array. To avoid this evaluate in msi_setup_device_data() whether the irq domain which is associated to a device is a "global" or a parent MSI domain. If it is global then copy the pointer into the first entry of the msi_dev_domain array. This allows to convert interfaces and implementation to domain ids while keeping everything existing working. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221124230313.923860399@linutronix.de
2022-11-25 07:24:22 +08:00
* @irqdomain: Pointer to a per device interrupt domain
*/
struct msi_dev_domain {
struct xarray store;
genirq/msi: Add pointers for per device irq domains With the upcoming per device MSI interrupt domain support it is necessary to store the domain pointers per device. Instead of delegating that storage to device drivers or subsystems add a domain pointer to the msi_dev_domain array in struct msi_device_data. This pointer is also used to take care of tearing down the irq domains when msi_device_data is cleaned up via devres. The interfaces into the MSI core will be changed from irqdomain pointer based interfaces to domain id based interfaces to support multiple MSI domains on a single device (e.g. PCI/MSI[-X] and PCI/IMS. Once the per device domain support is complete the irq domain pointer in struct device::msi.domain will not longer contain a pointer to the "global" MSI domain. It will contain a pointer to the MSI parent domain instead. It would be a horrible maze of conditionals to evaluate all over the place which domain pointer should be used, i.e. the "global" one in device::msi::domain or one from the internal pointer array. To avoid this evaluate in msi_setup_device_data() whether the irq domain which is associated to a device is a "global" or a parent MSI domain. If it is global then copy the pointer into the first entry of the msi_dev_domain array. This allows to convert interfaces and implementation to domain ids while keeping everything existing working. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221124230313.923860399@linutronix.de
2022-11-25 07:24:22 +08:00
struct irq_domain *domain;
};
/**
* msi_device_data - MSI per device data
* @properties: MSI properties which are interesting to drivers
* @platform_data: Platform-MSI specific data
* @mutex: Mutex protecting the MSI descriptor store
* @__domains: Internal data for per device MSI domains
* @__iter_idx: Index to search the next entry for iterators
*/
struct msi_device_data {
unsigned long properties;
struct platform_msi_priv_data *platform_data;
struct mutex mutex;
struct msi_dev_domain __domains[MSI_MAX_DEVICE_IRQDOMAINS];
unsigned long __iter_idx;
};
int msi_setup_device_data(struct device *dev);
void msi_lock_descs(struct device *dev);
void msi_unlock_descs(struct device *dev);
struct msi_desc *msi_domain_first_desc(struct device *dev, unsigned int domid,
enum msi_desc_filter filter);
/**
* msi_first_desc - Get the first MSI descriptor of the default irqdomain
* @dev: Device to operate on
* @filter: Descriptor state filter
*
* Must be called with the MSI descriptor mutex held, i.e. msi_lock_descs()
* must be invoked before the call.
*
* Return: Pointer to the first MSI descriptor matching the search
* criteria, NULL if none found.
*/
static inline struct msi_desc *msi_first_desc(struct device *dev,
enum msi_desc_filter filter)
{
return msi_domain_first_desc(dev, MSI_DEFAULT_DOMAIN, filter);
}
struct msi_desc *msi_next_desc(struct device *dev, unsigned int domid,
enum msi_desc_filter filter);
/**
* msi_domain_for_each_desc - Iterate the MSI descriptors in a specific domain
*
* @desc: struct msi_desc pointer used as iterator
* @dev: struct device pointer - device to iterate
* @domid: The id of the interrupt domain which should be walked.
* @filter: Filter for descriptor selection
*
* Notes:
* - The loop must be protected with a msi_lock_descs()/msi_unlock_descs()
* pair.
* - It is safe to remove a retrieved MSI descriptor in the loop.
*/
#define msi_domain_for_each_desc(desc, dev, domid, filter) \
for ((desc) = msi_domain_first_desc((dev), (domid), (filter)); (desc); \
(desc) = msi_next_desc((dev), (domid), (filter)))
/**
* msi_for_each_desc - Iterate the MSI descriptors in the default irqdomain
*
* @desc: struct msi_desc pointer used as iterator
* @dev: struct device pointer - device to iterate
* @filter: Filter for descriptor selection
*
* Notes:
* - The loop must be protected with a msi_lock_descs()/msi_unlock_descs()
* pair.
* - It is safe to remove a retrieved MSI descriptor in the loop.
*/
#define msi_for_each_desc(desc, dev, filter) \
msi_domain_for_each_desc((desc), (dev), MSI_DEFAULT_DOMAIN, (filter))
#define msi_desc_to_dev(desc) ((desc)->dev)
#ifdef CONFIG_IRQ_MSI_IOMMU
static inline const void *msi_desc_get_iommu_cookie(struct msi_desc *desc)
{
return desc->iommu_cookie;
}
static inline void msi_desc_set_iommu_cookie(struct msi_desc *desc,
const void *iommu_cookie)
{
desc->iommu_cookie = iommu_cookie;
}
#else
static inline const void *msi_desc_get_iommu_cookie(struct msi_desc *desc)
{
return NULL;
}
static inline void msi_desc_set_iommu_cookie(struct msi_desc *desc,
const void *iommu_cookie)
{
}
#endif
int msi_domain_insert_msi_desc(struct device *dev, unsigned int domid,
struct msi_desc *init_desc);
/**
* msi_insert_msi_desc - Allocate and initialize a MSI descriptor in the
* default irqdomain and insert it at @init_desc->msi_index
* @dev: Pointer to the device for which the descriptor is allocated
* @init_desc: Pointer to an MSI descriptor to initialize the new descriptor
*
* Return: 0 on success or an appropriate failure code.
*/
static inline int msi_insert_msi_desc(struct device *dev, struct msi_desc *init_desc)
{
return msi_domain_insert_msi_desc(dev, MSI_DEFAULT_DOMAIN, init_desc);
}
void msi_domain_free_msi_descs_range(struct device *dev, unsigned int domid,
unsigned int first, unsigned int last);
/**
* msi_free_msi_descs_range - Free a range of MSI descriptors of a device
* in the default irqdomain
*
* @dev: Device for which to free the descriptors
* @first: Index to start freeing from (inclusive)
* @last: Last index to be freed (inclusive)
*/
static inline void msi_free_msi_descs_range(struct device *dev, unsigned int first,
unsigned int last)
{
msi_domain_free_msi_descs_range(dev, MSI_DEFAULT_DOMAIN, first, last);
}
/**
* msi_free_msi_descs - Free all MSI descriptors of a device in the default irqdomain
* @dev: Device to free the descriptors
*/
static inline void msi_free_msi_descs(struct device *dev)
{
msi_free_msi_descs_range(dev, 0, MSI_MAX_INDEX);
}
/*
* The arch hooks to setup up msi irqs. Default functions are implemented
* as weak symbols so that they /can/ be overriden by architecture specific
* code if needed. These hooks can only be enabled by the architecture.
*
* If CONFIG_PCI_MSI_ARCH_FALLBACKS is not selected they are replaced by
* stubs with warnings.
*/
#ifdef CONFIG_PCI_MSI_ARCH_FALLBACKS
int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc);
void arch_teardown_msi_irq(unsigned int irq);
int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
void arch_teardown_msi_irqs(struct pci_dev *dev);
#ifdef CONFIG_SYSFS
int msi_device_populate_sysfs(struct device *dev);
void msi_device_destroy_sysfs(struct device *dev);
#else /* CONFIG_SYSFS */
static inline int msi_device_populate_sysfs(struct device *dev) { return 0; }
static inline void msi_device_destroy_sysfs(struct device *dev) { }
#endif /* !CONFIG_SYSFS */
#endif /* CONFIG_PCI_MSI_ARCH_FALLBACKS */
/*
* The restore hook is still available even for fully irq domain based
* setups. Courtesy to XEN/X86.
*/
bool arch_restore_msi_irqs(struct pci_dev *dev);
#ifdef CONFIG_GENERIC_MSI_IRQ
#include <linux/irqhandler.h>
struct irq_domain;
struct irq_domain_ops;
struct irq_chip;
struct device_node;
struct fwnode_handle;
struct msi_domain_info;
/**
* struct msi_domain_ops - MSI interrupt domain callbacks
* @get_hwirq: Retrieve the resulting hw irq number
* @msi_init: Domain specific init function for MSI interrupts
* @msi_free: Domain specific function to free a MSI interrupts
* @msi_prepare: Prepare the allocation of the interrupts in the domain
* @set_desc: Set the msi descriptor for an interrupt
* @domain_alloc_irqs: Optional function to override the default allocation
* function.
* @domain_free_irqs: Optional function to override the default free
* function.
* @msi_post_free: Optional function which is invoked after freeing
* all interrupts.
*
* @get_hwirq, @msi_init and @msi_free are callbacks used by the underlying
* irqdomain.
*
* @msi_check, @msi_prepare and @set_desc are callbacks used by the
* msi_domain_alloc/free_irqs*() variants.
*
* @domain_alloc_irqs, @domain_free_irqs can be used to override the
* default allocation/free functions (__msi_domain_alloc/free_irqs). This
* is initially for a wrapper around XENs seperate MSI universe which can't
* be wrapped into the regular irq domains concepts by mere mortals. This
* allows to universally use msi_domain_alloc/free_irqs without having to
* special case XEN all over the place.
*/
struct msi_domain_ops {
irq_hw_number_t (*get_hwirq)(struct msi_domain_info *info,
msi_alloc_info_t *arg);
int (*msi_init)(struct irq_domain *domain,
struct msi_domain_info *info,
unsigned int virq, irq_hw_number_t hwirq,
msi_alloc_info_t *arg);
void (*msi_free)(struct irq_domain *domain,
struct msi_domain_info *info,
unsigned int virq);
int (*msi_prepare)(struct irq_domain *domain,
struct device *dev, int nvec,
msi_alloc_info_t *arg);
void (*set_desc)(msi_alloc_info_t *arg,
struct msi_desc *desc);
int (*domain_alloc_irqs)(struct irq_domain *domain,
struct device *dev, int nvec);
void (*domain_free_irqs)(struct irq_domain *domain,
struct device *dev);
void (*msi_post_free)(struct irq_domain *domain,
struct device *dev);
};
/**
* struct msi_domain_info - MSI interrupt domain data
* @flags: Flags to decribe features and capabilities
* @bus_token: The domain bus token
* @ops: The callback data structure
* @chip: Optional: associated interrupt chip
* @chip_data: Optional: associated interrupt chip data
* @handler: Optional: associated interrupt flow handler
* @handler_data: Optional: associated interrupt flow handler data
* @handler_name: Optional: associated interrupt flow handler name
* @data: Optional: domain specific data
*/
struct msi_domain_info {
u32 flags;
enum irq_domain_bus_token bus_token;
struct msi_domain_ops *ops;
struct irq_chip *chip;
void *chip_data;
irq_flow_handler_t handler;
void *handler_data;
const char *handler_name;
void *data;
};
/*
* Flags for msi_domain_info
*
* Bit 0-15: Generic MSI functionality which is not subject to restriction
* by parent domains
*
* Bit 16-31: Functionality which depends on the underlying parent domain and
* can be masked out by msi_parent_ops::init_dev_msi_info() when
* a device MSI domain is initialized.
*/
enum {
/*
* Init non implemented ops callbacks with default MSI domain
* callbacks.
*/
MSI_FLAG_USE_DEF_DOM_OPS = (1 << 0),
/*
* Init non implemented chip callbacks with default MSI chip
* callbacks.
*/
MSI_FLAG_USE_DEF_CHIP_OPS = (1 << 1),
genirq/msi: Make sure PCI MSIs are activated early Bharat Kumar Gogada reported issues with the generic MSI code, where the end-point ended up with garbage in its MSI configuration (both for the vector and the message). It turns out that the two MSI paths in the kernel are doing slightly different things: generic MSI: disable MSI -> allocate MSI -> enable MSI -> setup EP PCI MSI: disable MSI -> allocate MSI -> setup EP -> enable MSI And it turns out that end-points are allowed to latch the content of the MSI configuration registers as soon as MSIs are enabled. In Bharat's case, the end-point ends up using whatever was there already, which is not what you want. In order to make things converge, we introduce a new MSI domain flag (MSI_FLAG_ACTIVATE_EARLY) that is unconditionally set for PCI/MSI. When set, this flag forces the programming of the end-point as soon as the MSIs are allocated. A consequence of this is that we have an extra activate in irq_startup, but that should be without much consequence. tglx: - Several people reported a VMWare regression with PCI/MSI-X passthrough. It turns out that the patch also cures that issue. - We need to have a look at the MSI disable interrupt path, where we write the msg to all zeros without disabling MSI in the PCI device. Is that correct? Fixes: 52f518a3a7c2 "x86/MSI: Use hierarchical irqdomains to manage MSI interrupts" Reported-and-tested-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> Reported-and-tested-by: Foster Snowhill <forst@forstwoof.ru> Reported-by: Matthias Prager <linux@matthiasprager.de> Reported-by: Jason Taylor <jason.taylor@simplivity.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1468426713-31431-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-14 00:18:33 +08:00
/* Needs early activate, required for PCI */
MSI_FLAG_ACTIVATE_EARLY = (1 << 2),
/*
* Must reactivate when irq is started even when
* MSI_FLAG_ACTIVATE_EARLY has been set.
*/
MSI_FLAG_MUST_REACTIVATE = (1 << 3),
/* Populate sysfs on alloc() and destroy it on free() */
MSI_FLAG_DEV_SYSFS = (1 << 4),
/* Allocate simple MSI descriptors */
MSI_FLAG_ALLOC_SIMPLE_MSI_DESCS = (1 << 5),
/* Free MSI descriptors */
MSI_FLAG_FREE_MSI_DESCS = (1 << 6),
/*
* Quirk to handle MSI implementations which do not provide
* masking. Currently known to affect x86, but has to be partially
* handled in the core MSI code.
*/
MSI_FLAG_NOMASK_QUIRK = (1 << 7),
/* Mask for the generic functionality */
MSI_GENERIC_FLAGS_MASK = GENMASK(15, 0),
/* Mask for the domain specific functionality */
MSI_DOMAIN_FLAGS_MASK = GENMASK(31, 16),
/* Support multiple PCI MSI interrupts */
MSI_FLAG_MULTI_PCI_MSI = (1 << 16),
/* Support PCI MSIX interrupts */
MSI_FLAG_PCI_MSIX = (1 << 17),
/* Is level-triggered capable, using two messages */
MSI_FLAG_LEVEL_CAPABLE = (1 << 18),
/* MSI-X entries must be contiguous */
MSI_FLAG_MSIX_CONTIGUOUS = (1 << 19),
};
genirq/msi: Provide struct msi_parent_ops MSI parent domains must have some control over the MSI domains which are built on top. On domain creation they need to fill in e.g. architecture specific chip callbacks or msi domain ops to make the outermost domain parent agnostic which is obviously required for architecture independence etc. The structure contains: 1) A bitfield which exposes the supported functional features. This allows to check for features and is also used in the initialization callback to mask out unsupported features when the actual domain implementation requests a broader range, e.g. on x86 PCI multi-MSI is only supported by remapping domains but not by the underlying vector domain. The PCI/MSI code can then always request multi-MSI support, but the resulting feature set after creation might not have it set. 2) An optional string prefix which is put in front of domain and chip names during creation of the MSI domain. That allows to keep the naming schemes e.g. on x86 where PCI-MSI domains have a IR- prefix when interrupt remapping is enabled. 3) An initialization callback to sanity check the domain info of the to be created MSI domain, to restrict features and to apply changes in MSI ops and interrupt chip callbacks to accomodate to the particular MSI parent implementation and/or the underlying hierarchy. Add a conveniance function to delegate the initialization from the MSI parent domain to an underlying domain in the hierarchy. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221124232325.382485843@linutronix.de
2022-11-25 07:25:48 +08:00
/**
* struct msi_parent_ops - MSI parent domain callbacks and configuration info
*
* @supported_flags: Required: The supported MSI flags of the parent domain
* @prefix: Optional: Prefix for the domain and chip name
* @init_dev_msi_info: Required: Callback for MSI parent domains to setup parent
* domain specific domain flags, domain ops and interrupt chip
* callbacks when a per device domain is created.
*/
struct msi_parent_ops {
u32 supported_flags;
const char *prefix;
bool (*init_dev_msi_info)(struct device *dev, struct irq_domain *domain,
struct irq_domain *msi_parent_domain,
struct msi_domain_info *msi_child_info);
};
bool msi_parent_init_dev_msi_info(struct device *dev, struct irq_domain *domain,
struct irq_domain *msi_parent_domain,
struct msi_domain_info *msi_child_info);
int msi_domain_set_affinity(struct irq_data *data, const struct cpumask *mask,
bool force);
struct irq_domain *msi_create_irq_domain(struct fwnode_handle *fwnode,
struct msi_domain_info *info,
struct irq_domain *parent);
int msi_domain_alloc_irqs_range_locked(struct device *dev, unsigned int domid,
unsigned int first, unsigned int last);
int msi_domain_alloc_irqs_range(struct device *dev, unsigned int domid,
unsigned int first, unsigned int last);
int msi_domain_alloc_irqs_all_locked(struct device *dev, unsigned int domid, int nirqs);
void msi_domain_free_irqs_range_locked(struct device *dev, unsigned int domid,
unsigned int first, unsigned int last);
void msi_domain_free_irqs_range(struct device *dev, unsigned int domid,
unsigned int first, unsigned int last);
void msi_domain_free_irqs_all_locked(struct device *dev, unsigned int domid);
void msi_domain_free_irqs_all(struct device *dev, unsigned int domid);
struct msi_domain_info *msi_get_domain_info(struct irq_domain *domain);
struct irq_domain *platform_msi_create_irq_domain(struct fwnode_handle *fwnode,
drivers/base: Add MSI domain support for non-PCI devices With the msi_list and the msi_domain properties now being at the generic device level, it is starting to be relatively easy to offer a generic way of providing non-PCI MSIs. The two major hurdles with this idea are: - Lack of global ID that identifies a device: this is worked around by having a global ID allocator for each device that gets enrolled in the platform MSI subsystem - Lack of standard way to write the message in the generating device. This is solved by mandating driver code to provide a write_msg callback, so that everyone can have their own square wheel Apart from that, the API is fairly straightforward: - platform_msi_create_irq_domain creates an MSI domain that gets tagged with DOMAIN_BUS_PLATFORM_MSI - platform_msi_domain_alloc_irqs allocate MSIs for a given device, populating the msi_list - platform_msi_domain_free_irqs does what is written on the tin [ tglx: Created a seperate struct platform_msi_desc and added kerneldoc entries ] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-10-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-28 21:46:16 +08:00
struct msi_domain_info *info,
struct irq_domain *parent);
int platform_msi_domain_alloc_irqs(struct device *dev, unsigned int nvec,
irq_write_msi_msg_t write_msi_msg);
void platform_msi_domain_free_irqs(struct device *dev);
/* When an MSI domain is used as an intermediate domain */
int msi_domain_prepare_irqs(struct irq_domain *domain, struct device *dev,
int nvec, msi_alloc_info_t *args);
int msi_domain_populate_irqs(struct irq_domain *domain, struct device *dev,
int virq, int nvec, msi_alloc_info_t *args);
struct irq_domain *
__platform_msi_create_device_domain(struct device *dev,
unsigned int nvec,
bool is_tree,
irq_write_msi_msg_t write_msi_msg,
const struct irq_domain_ops *ops,
void *host_data);
#define platform_msi_create_device_domain(dev, nvec, write, ops, data) \
__platform_msi_create_device_domain(dev, nvec, false, write, ops, data)
#define platform_msi_create_device_tree_domain(dev, nvec, write, ops, data) \
__platform_msi_create_device_domain(dev, nvec, true, write, ops, data)
int platform_msi_device_domain_alloc(struct irq_domain *domain, unsigned int virq,
unsigned int nr_irqs);
void platform_msi_device_domain_free(struct irq_domain *domain, unsigned int virq,
unsigned int nvec);
void *platform_msi_get_host_data(struct irq_domain *domain);
#endif /* CONFIG_GENERIC_MSI_IRQ */
/* PCI specific interfaces */
#ifdef CONFIG_PCI_MSI
struct pci_dev *msi_desc_to_pci_dev(struct msi_desc *desc);
void pci_write_msi_msg(unsigned int irq, struct msi_msg *msg);
void __pci_read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
void __pci_write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
void pci_msi_mask_irq(struct irq_data *data);
void pci_msi_unmask_irq(struct irq_data *data);
struct irq_domain *pci_msi_create_irq_domain(struct fwnode_handle *fwnode,
struct msi_domain_info *info,
struct irq_domain *parent);
u32 pci_msi_domain_get_msi_rid(struct irq_domain *domain, struct pci_dev *pdev);
struct irq_domain *pci_msi_get_device_domain(struct pci_dev *pdev);
bool pci_dev_has_special_msi_domain(struct pci_dev *pdev);
#else /* CONFIG_PCI_MSI */
static inline struct irq_domain *pci_msi_get_device_domain(struct pci_dev *pdev)
{
return NULL;
}
static inline void pci_write_msi_msg(unsigned int irq, struct msi_msg *msg) { }
#endif /* !CONFIG_PCI_MSI */
#endif /* LINUX_MSI_H */