OpenCloudOS-Kernel/drivers/md/dm-ima.c

749 lines
21 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
dm ima: measure data on table load DM configures a block device with various target specific attributes passed to it as a table. DM loads the table, and calls each target’s respective constructors with the attributes as input parameters. Some of these attributes are critical to ensure the device meets certain security bar. Thus, IMA should measure these attributes, to ensure they are not tampered with, during the lifetime of the device. So that the external services can have high confidence in the configuration of the block-devices on a given system. Some devices may have large tables. And a given device may change its state (table-load, suspend, resume, rename, remove, table-clear etc.) many times. Measuring these attributes each time when the device changes its state will significantly increase the size of the IMA logs. Further, once configured, these attributes are not expected to change unless a new table is loaded, or a device is removed and recreated. Therefore the clear-text of the attributes should only be measured during table load, and the hash of the active/inactive table should be measured for the remaining device state changes. Export IMA function ima_measure_critical_data() to allow measurement of DM device parameters, as well as target specific attributes, during table load. Compute the hash of the inactive table and store it for measurements during future state change. If a load is called multiple times, update the inactive table hash with the hash of the latest populated table. So that the correct inactive table hash is measured when the device transitions to different states like resume, remove, rename, etc. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 08:48:58 +08:00
/*
* Copyright (C) 2021 Microsoft Corporation
*
* Author: Tushar Sugandhi <tusharsu@linux.microsoft.com>
*
* Enables IMA measurements for DM targets
dm ima: measure data on table load DM configures a block device with various target specific attributes passed to it as a table. DM loads the table, and calls each target’s respective constructors with the attributes as input parameters. Some of these attributes are critical to ensure the device meets certain security bar. Thus, IMA should measure these attributes, to ensure they are not tampered with, during the lifetime of the device. So that the external services can have high confidence in the configuration of the block-devices on a given system. Some devices may have large tables. And a given device may change its state (table-load, suspend, resume, rename, remove, table-clear etc.) many times. Measuring these attributes each time when the device changes its state will significantly increase the size of the IMA logs. Further, once configured, these attributes are not expected to change unless a new table is loaded, or a device is removed and recreated. Therefore the clear-text of the attributes should only be measured during table load, and the hash of the active/inactive table should be measured for the remaining device state changes. Export IMA function ima_measure_critical_data() to allow measurement of DM device parameters, as well as target specific attributes, during table load. Compute the hash of the inactive table and store it for measurements during future state change. If a load is called multiple times, update the inactive table hash with the hash of the latest populated table. So that the correct inactive table hash is measured when the device transitions to different states like resume, remove, rename, etc. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 08:48:58 +08:00
*/
#include "dm-core.h"
#include "dm-ima.h"
#include <linux/ima.h>
#include <linux/sched/mm.h>
dm ima: measure data on table load DM configures a block device with various target specific attributes passed to it as a table. DM loads the table, and calls each target’s respective constructors with the attributes as input parameters. Some of these attributes are critical to ensure the device meets certain security bar. Thus, IMA should measure these attributes, to ensure they are not tampered with, during the lifetime of the device. So that the external services can have high confidence in the configuration of the block-devices on a given system. Some devices may have large tables. And a given device may change its state (table-load, suspend, resume, rename, remove, table-clear etc.) many times. Measuring these attributes each time when the device changes its state will significantly increase the size of the IMA logs. Further, once configured, these attributes are not expected to change unless a new table is loaded, or a device is removed and recreated. Therefore the clear-text of the attributes should only be measured during table load, and the hash of the active/inactive table should be measured for the remaining device state changes. Export IMA function ima_measure_critical_data() to allow measurement of DM device parameters, as well as target specific attributes, during table load. Compute the hash of the inactive table and store it for measurements during future state change. If a load is called multiple times, update the inactive table hash with the hash of the latest populated table. So that the correct inactive table hash is measured when the device transitions to different states like resume, remove, rename, etc. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 08:48:58 +08:00
#include <crypto/hash.h>
#include <linux/crypto.h>
#include <crypto/hash_info.h>
#define DM_MSG_PREFIX "ima"
/*
* Internal function to prefix separator characters in input buffer with escape
* character, so that they don't interfere with the construction of key-value pairs,
* and clients can split the key1=val1,key2=val2,key3=val3; pairs properly.
*/
static void fix_separator_chars(char **buf)
{
int l = strlen(*buf);
int i, j, sp = 0;
for (i = 0; i < l; i++)
if ((*buf)[i] == '\\' || (*buf)[i] == ';' || (*buf)[i] == '=' || (*buf)[i] == ',')
sp++;
if (!sp)
return;
for (i = l-1, j = i+sp; i >= 0; i--) {
(*buf)[j--] = (*buf)[i];
if ((*buf)[i] == '\\' || (*buf)[i] == ';' || (*buf)[i] == '=' || (*buf)[i] == ',')
(*buf)[j--] = '\\';
}
}
/*
* Internal function to allocate memory for IMA measurements.
*/
static void *dm_ima_alloc(size_t len, gfp_t flags, bool noio)
{
unsigned int noio_flag;
void *ptr;
if (noio)
noio_flag = memalloc_noio_save();
ptr = kzalloc(len, flags);
if (noio)
memalloc_noio_restore(noio_flag);
return ptr;
}
/*
* Internal function to allocate and copy name and uuid for IMA measurements.
*/
static int dm_ima_alloc_and_copy_name_uuid(struct mapped_device *md, char **dev_name,
char **dev_uuid, bool noio)
{
int r;
*dev_name = dm_ima_alloc(DM_NAME_LEN*2, GFP_KERNEL, noio);
if (!(*dev_name)) {
r = -ENOMEM;
goto error;
}
*dev_uuid = dm_ima_alloc(DM_UUID_LEN*2, GFP_KERNEL, noio);
if (!(*dev_uuid)) {
r = -ENOMEM;
goto error;
}
r = dm_copy_name_and_uuid(md, *dev_name, *dev_uuid);
if (r)
goto error;
fix_separator_chars(dev_name);
fix_separator_chars(dev_uuid);
return 0;
error:
kfree(*dev_name);
kfree(*dev_uuid);
*dev_name = NULL;
*dev_uuid = NULL;
return r;
}
/*
* Internal function to allocate and copy device data for IMA measurements.
*/
static int dm_ima_alloc_and_copy_device_data(struct mapped_device *md, char **device_data,
unsigned int num_targets, bool noio)
{
char *dev_name = NULL, *dev_uuid = NULL;
int r;
r = dm_ima_alloc_and_copy_name_uuid(md, &dev_name, &dev_uuid, noio);
if (r)
return r;
*device_data = dm_ima_alloc(DM_IMA_DEVICE_BUF_LEN, GFP_KERNEL, noio);
if (!(*device_data)) {
r = -ENOMEM;
goto error;
}
scnprintf(*device_data, DM_IMA_DEVICE_BUF_LEN,
"name=%s,uuid=%s,major=%d,minor=%d,minor_count=%d,num_targets=%u;",
dev_name, dev_uuid, md->disk->major, md->disk->first_minor,
md->disk->minors, num_targets);
error:
kfree(dev_name);
kfree(dev_uuid);
return r;
}
/*
* Internal wrapper function to call IMA to measure DM data.
*/
static void dm_ima_measure_data(const char *event_name, const void *buf, size_t buf_len,
bool noio)
{
unsigned int noio_flag;
if (noio)
noio_flag = memalloc_noio_save();
integrity-v5.15 -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYS4c6hQcem9oYXJAbGlu dXguaWJtLmNvbQAKCRDLwZzRsCrn5b4OAP9l7cnpkOzVUtjoNIIYdIiKTDp+Kb8v 3o08lxtyzALfKgEAlrizzLfphqLa2yCdxbyaTjkx19J7tav27xVti8uVGgs= =hIxY -----END PGP SIGNATURE----- Merge tag 'integrity-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity subsystem updates from Mimi Zohar: - Limit the allowed hash algorithms when writing security.ima xattrs or verifying them, based on the IMA policy and the configured hash algorithms. - Return the calculated "critical data" measurement hash and size to avoid code duplication. (Preparatory change for a proposed LSM.) - and a single patch to address a compiler warning. * tag 'integrity-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: IMA: reject unknown hash algorithms in ima_get_hash_algo IMA: prevent SETXATTR_CHECK policy rules with unavailable algorithms IMA: introduce a new policy option func=SETXATTR_CHECK IMA: add a policy option to restrict xattr hash algorithms on appraisal IMA: add support to restrict the hash algorithms used for file appraisal IMA: block writes of the security.ima xattr with unsupported algorithms IMA: remove the dependency on CRYPTO_MD5 ima: Add digest and digest_len params to the functions to measure a buffer ima: Return int in the functions to measure a buffer ima: Introduce ima_get_current_hash_algo() IMA: remove -Wmissing-prototypes warning
2021-09-03 03:51:41 +08:00
ima_measure_critical_data(DM_NAME, event_name, buf, buf_len,
false, NULL, 0);
dm ima: measure data on table load DM configures a block device with various target specific attributes passed to it as a table. DM loads the table, and calls each target’s respective constructors with the attributes as input parameters. Some of these attributes are critical to ensure the device meets certain security bar. Thus, IMA should measure these attributes, to ensure they are not tampered with, during the lifetime of the device. So that the external services can have high confidence in the configuration of the block-devices on a given system. Some devices may have large tables. And a given device may change its state (table-load, suspend, resume, rename, remove, table-clear etc.) many times. Measuring these attributes each time when the device changes its state will significantly increase the size of the IMA logs. Further, once configured, these attributes are not expected to change unless a new table is loaded, or a device is removed and recreated. Therefore the clear-text of the attributes should only be measured during table load, and the hash of the active/inactive table should be measured for the remaining device state changes. Export IMA function ima_measure_critical_data() to allow measurement of DM device parameters, as well as target specific attributes, during table load. Compute the hash of the inactive table and store it for measurements during future state change. If a load is called multiple times, update the inactive table hash with the hash of the latest populated table. So that the correct inactive table hash is measured when the device transitions to different states like resume, remove, rename, etc. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 08:48:58 +08:00
if (noio)
memalloc_noio_restore(noio_flag);
}
/*
* Internal function to allocate and copy current device capacity for IMA measurements.
*/
static int dm_ima_alloc_and_copy_capacity_str(struct mapped_device *md, char **capacity_str,
bool noio)
{
sector_t capacity;
capacity = get_capacity(md->disk);
*capacity_str = dm_ima_alloc(DM_IMA_DEVICE_CAPACITY_BUF_LEN, GFP_KERNEL, noio);
if (!(*capacity_str))
return -ENOMEM;
scnprintf(*capacity_str, DM_IMA_DEVICE_BUF_LEN, "current_device_capacity=%llu;",
capacity);
return 0;
}
dm ima: measure data on table load DM configures a block device with various target specific attributes passed to it as a table. DM loads the table, and calls each target’s respective constructors with the attributes as input parameters. Some of these attributes are critical to ensure the device meets certain security bar. Thus, IMA should measure these attributes, to ensure they are not tampered with, during the lifetime of the device. So that the external services can have high confidence in the configuration of the block-devices on a given system. Some devices may have large tables. And a given device may change its state (table-load, suspend, resume, rename, remove, table-clear etc.) many times. Measuring these attributes each time when the device changes its state will significantly increase the size of the IMA logs. Further, once configured, these attributes are not expected to change unless a new table is loaded, or a device is removed and recreated. Therefore the clear-text of the attributes should only be measured during table load, and the hash of the active/inactive table should be measured for the remaining device state changes. Export IMA function ima_measure_critical_data() to allow measurement of DM device parameters, as well as target specific attributes, during table load. Compute the hash of the inactive table and store it for measurements during future state change. If a load is called multiple times, update the inactive table hash with the hash of the latest populated table. So that the correct inactive table hash is measured when the device transitions to different states like resume, remove, rename, etc. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 08:48:58 +08:00
/*
* Initialize/reset the dm ima related data structure variables.
*/
void dm_ima_reset_data(struct mapped_device *md)
{
memset(&(md->ima), 0, sizeof(md->ima));
md->ima.dm_version_str_len = strlen(DM_IMA_VERSION_STR);
dm ima: measure data on table load DM configures a block device with various target specific attributes passed to it as a table. DM loads the table, and calls each target’s respective constructors with the attributes as input parameters. Some of these attributes are critical to ensure the device meets certain security bar. Thus, IMA should measure these attributes, to ensure they are not tampered with, during the lifetime of the device. So that the external services can have high confidence in the configuration of the block-devices on a given system. Some devices may have large tables. And a given device may change its state (table-load, suspend, resume, rename, remove, table-clear etc.) many times. Measuring these attributes each time when the device changes its state will significantly increase the size of the IMA logs. Further, once configured, these attributes are not expected to change unless a new table is loaded, or a device is removed and recreated. Therefore the clear-text of the attributes should only be measured during table load, and the hash of the active/inactive table should be measured for the remaining device state changes. Export IMA function ima_measure_critical_data() to allow measurement of DM device parameters, as well as target specific attributes, during table load. Compute the hash of the inactive table and store it for measurements during future state change. If a load is called multiple times, update the inactive table hash with the hash of the latest populated table. So that the correct inactive table hash is measured when the device transitions to different states like resume, remove, rename, etc. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 08:48:58 +08:00
}
/*
* Build up the IMA data for each target, and finally measure.
*/
void dm_ima_measure_on_table_load(struct dm_table *table, unsigned int status_flags)
{
size_t device_data_buf_len, target_metadata_buf_len, target_data_buf_len, l = 0;
char *target_metadata_buf = NULL, *target_data_buf = NULL, *digest_buf = NULL;
char *ima_buf = NULL, *device_data_buf = NULL;
int digest_size, last_target_measured = -1, r;
status_type_t type = STATUSTYPE_IMA;
size_t cur_total_buf_len = 0;
unsigned int num_targets, i;
SHASH_DESC_ON_STACK(shash, NULL);
struct crypto_shash *tfm = NULL;
u8 *digest = NULL;
bool noio = false;
/*
* In below hash_alg_prefix_len assignment +1 is for the additional char (':'),
* when prefixing the hash value with the hash algorithm name. e.g. sha256:<hash_value>.
*/
const size_t hash_alg_prefix_len = strlen(DM_IMA_TABLE_HASH_ALG) + 1;
char table_load_event_name[] = "dm_table_load";
dm ima: measure data on table load DM configures a block device with various target specific attributes passed to it as a table. DM loads the table, and calls each target’s respective constructors with the attributes as input parameters. Some of these attributes are critical to ensure the device meets certain security bar. Thus, IMA should measure these attributes, to ensure they are not tampered with, during the lifetime of the device. So that the external services can have high confidence in the configuration of the block-devices on a given system. Some devices may have large tables. And a given device may change its state (table-load, suspend, resume, rename, remove, table-clear etc.) many times. Measuring these attributes each time when the device changes its state will significantly increase the size of the IMA logs. Further, once configured, these attributes are not expected to change unless a new table is loaded, or a device is removed and recreated. Therefore the clear-text of the attributes should only be measured during table load, and the hash of the active/inactive table should be measured for the remaining device state changes. Export IMA function ima_measure_critical_data() to allow measurement of DM device parameters, as well as target specific attributes, during table load. Compute the hash of the inactive table and store it for measurements during future state change. If a load is called multiple times, update the inactive table hash with the hash of the latest populated table. So that the correct inactive table hash is measured when the device transitions to different states like resume, remove, rename, etc. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 08:48:58 +08:00
ima_buf = dm_ima_alloc(DM_IMA_MEASUREMENT_BUF_LEN, GFP_KERNEL, noio);
if (!ima_buf)
return;
target_metadata_buf = dm_ima_alloc(DM_IMA_TARGET_METADATA_BUF_LEN, GFP_KERNEL, noio);
if (!target_metadata_buf)
goto error;
target_data_buf = dm_ima_alloc(DM_IMA_TARGET_DATA_BUF_LEN, GFP_KERNEL, noio);
if (!target_data_buf)
goto error;
num_targets = table->num_targets;
dm ima: measure data on table load DM configures a block device with various target specific attributes passed to it as a table. DM loads the table, and calls each target’s respective constructors with the attributes as input parameters. Some of these attributes are critical to ensure the device meets certain security bar. Thus, IMA should measure these attributes, to ensure they are not tampered with, during the lifetime of the device. So that the external services can have high confidence in the configuration of the block-devices on a given system. Some devices may have large tables. And a given device may change its state (table-load, suspend, resume, rename, remove, table-clear etc.) many times. Measuring these attributes each time when the device changes its state will significantly increase the size of the IMA logs. Further, once configured, these attributes are not expected to change unless a new table is loaded, or a device is removed and recreated. Therefore the clear-text of the attributes should only be measured during table load, and the hash of the active/inactive table should be measured for the remaining device state changes. Export IMA function ima_measure_critical_data() to allow measurement of DM device parameters, as well as target specific attributes, during table load. Compute the hash of the inactive table and store it for measurements during future state change. If a load is called multiple times, update the inactive table hash with the hash of the latest populated table. So that the correct inactive table hash is measured when the device transitions to different states like resume, remove, rename, etc. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 08:48:58 +08:00
if (dm_ima_alloc_and_copy_device_data(table->md, &device_data_buf, num_targets, noio))
goto error;
tfm = crypto_alloc_shash(DM_IMA_TABLE_HASH_ALG, 0, 0);
dm ima: measure data on table load DM configures a block device with various target specific attributes passed to it as a table. DM loads the table, and calls each target’s respective constructors with the attributes as input parameters. Some of these attributes are critical to ensure the device meets certain security bar. Thus, IMA should measure these attributes, to ensure they are not tampered with, during the lifetime of the device. So that the external services can have high confidence in the configuration of the block-devices on a given system. Some devices may have large tables. And a given device may change its state (table-load, suspend, resume, rename, remove, table-clear etc.) many times. Measuring these attributes each time when the device changes its state will significantly increase the size of the IMA logs. Further, once configured, these attributes are not expected to change unless a new table is loaded, or a device is removed and recreated. Therefore the clear-text of the attributes should only be measured during table load, and the hash of the active/inactive table should be measured for the remaining device state changes. Export IMA function ima_measure_critical_data() to allow measurement of DM device parameters, as well as target specific attributes, during table load. Compute the hash of the inactive table and store it for measurements during future state change. If a load is called multiple times, update the inactive table hash with the hash of the latest populated table. So that the correct inactive table hash is measured when the device transitions to different states like resume, remove, rename, etc. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 08:48:58 +08:00
if (IS_ERR(tfm))
goto error;
shash->tfm = tfm;
digest_size = crypto_shash_digestsize(tfm);
digest = dm_ima_alloc(digest_size, GFP_KERNEL, noio);
if (!digest)
goto error;
r = crypto_shash_init(shash);
if (r)
goto error;
memcpy(ima_buf + l, DM_IMA_VERSION_STR, table->md->ima.dm_version_str_len);
l += table->md->ima.dm_version_str_len;
dm ima: measure data on table load DM configures a block device with various target specific attributes passed to it as a table. DM loads the table, and calls each target’s respective constructors with the attributes as input parameters. Some of these attributes are critical to ensure the device meets certain security bar. Thus, IMA should measure these attributes, to ensure they are not tampered with, during the lifetime of the device. So that the external services can have high confidence in the configuration of the block-devices on a given system. Some devices may have large tables. And a given device may change its state (table-load, suspend, resume, rename, remove, table-clear etc.) many times. Measuring these attributes each time when the device changes its state will significantly increase the size of the IMA logs. Further, once configured, these attributes are not expected to change unless a new table is loaded, or a device is removed and recreated. Therefore the clear-text of the attributes should only be measured during table load, and the hash of the active/inactive table should be measured for the remaining device state changes. Export IMA function ima_measure_critical_data() to allow measurement of DM device parameters, as well as target specific attributes, during table load. Compute the hash of the inactive table and store it for measurements during future state change. If a load is called multiple times, update the inactive table hash with the hash of the latest populated table. So that the correct inactive table hash is measured when the device transitions to different states like resume, remove, rename, etc. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 08:48:58 +08:00
device_data_buf_len = strlen(device_data_buf);
memcpy(ima_buf + l, device_data_buf, device_data_buf_len);
l += device_data_buf_len;
for (i = 0; i < num_targets; i++) {
struct dm_target *ti = dm_table_get_target(table, i);
last_target_measured = 0;
/*
* First retrieve the target metadata.
*/
scnprintf(target_metadata_buf, DM_IMA_TARGET_METADATA_BUF_LEN,
"target_index=%d,target_begin=%llu,target_len=%llu,",
i, ti->begin, ti->len);
target_metadata_buf_len = strlen(target_metadata_buf);
/*
* Then retrieve the actual target data.
*/
if (ti->type->status)
ti->type->status(ti, type, status_flags, target_data_buf,
DM_IMA_TARGET_DATA_BUF_LEN);
else
target_data_buf[0] = '\0';
target_data_buf_len = strlen(target_data_buf);
/*
* Check if the total data can fit into the IMA buffer.
*/
cur_total_buf_len = l + target_metadata_buf_len + target_data_buf_len;
/*
* IMA measurements for DM targets are best-effort.
* If the total data buffered so far, including the current target,
* is too large to fit into DM_IMA_MEASUREMENT_BUF_LEN, measure what
* we have in the current buffer, and continue measuring the remaining
* targets by prefixing the device metadata again.
*/
if (unlikely(cur_total_buf_len >= DM_IMA_MEASUREMENT_BUF_LEN)) {
dm_ima_measure_data(table_load_event_name, ima_buf, l, noio);
dm ima: measure data on table load DM configures a block device with various target specific attributes passed to it as a table. DM loads the table, and calls each target’s respective constructors with the attributes as input parameters. Some of these attributes are critical to ensure the device meets certain security bar. Thus, IMA should measure these attributes, to ensure they are not tampered with, during the lifetime of the device. So that the external services can have high confidence in the configuration of the block-devices on a given system. Some devices may have large tables. And a given device may change its state (table-load, suspend, resume, rename, remove, table-clear etc.) many times. Measuring these attributes each time when the device changes its state will significantly increase the size of the IMA logs. Further, once configured, these attributes are not expected to change unless a new table is loaded, or a device is removed and recreated. Therefore the clear-text of the attributes should only be measured during table load, and the hash of the active/inactive table should be measured for the remaining device state changes. Export IMA function ima_measure_critical_data() to allow measurement of DM device parameters, as well as target specific attributes, during table load. Compute the hash of the inactive table and store it for measurements during future state change. If a load is called multiple times, update the inactive table hash with the hash of the latest populated table. So that the correct inactive table hash is measured when the device transitions to different states like resume, remove, rename, etc. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 08:48:58 +08:00
r = crypto_shash_update(shash, (const u8 *)ima_buf, l);
if (r < 0)
goto error;
memset(ima_buf, 0, DM_IMA_MEASUREMENT_BUF_LEN);
l = 0;
/*
* Each new "dm_table_load" entry in IMA log should have device data
* prefix, so that multiple records from the same "dm_table_load" for
dm ima: measure data on table load DM configures a block device with various target specific attributes passed to it as a table. DM loads the table, and calls each target’s respective constructors with the attributes as input parameters. Some of these attributes are critical to ensure the device meets certain security bar. Thus, IMA should measure these attributes, to ensure they are not tampered with, during the lifetime of the device. So that the external services can have high confidence in the configuration of the block-devices on a given system. Some devices may have large tables. And a given device may change its state (table-load, suspend, resume, rename, remove, table-clear etc.) many times. Measuring these attributes each time when the device changes its state will significantly increase the size of the IMA logs. Further, once configured, these attributes are not expected to change unless a new table is loaded, or a device is removed and recreated. Therefore the clear-text of the attributes should only be measured during table load, and the hash of the active/inactive table should be measured for the remaining device state changes. Export IMA function ima_measure_critical_data() to allow measurement of DM device parameters, as well as target specific attributes, during table load. Compute the hash of the inactive table and store it for measurements during future state change. If a load is called multiple times, update the inactive table hash with the hash of the latest populated table. So that the correct inactive table hash is measured when the device transitions to different states like resume, remove, rename, etc. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 08:48:58 +08:00
* a given device can be linked together.
*/
memcpy(ima_buf + l, DM_IMA_VERSION_STR, table->md->ima.dm_version_str_len);
l += table->md->ima.dm_version_str_len;
dm ima: measure data on table load DM configures a block device with various target specific attributes passed to it as a table. DM loads the table, and calls each target’s respective constructors with the attributes as input parameters. Some of these attributes are critical to ensure the device meets certain security bar. Thus, IMA should measure these attributes, to ensure they are not tampered with, during the lifetime of the device. So that the external services can have high confidence in the configuration of the block-devices on a given system. Some devices may have large tables. And a given device may change its state (table-load, suspend, resume, rename, remove, table-clear etc.) many times. Measuring these attributes each time when the device changes its state will significantly increase the size of the IMA logs. Further, once configured, these attributes are not expected to change unless a new table is loaded, or a device is removed and recreated. Therefore the clear-text of the attributes should only be measured during table load, and the hash of the active/inactive table should be measured for the remaining device state changes. Export IMA function ima_measure_critical_data() to allow measurement of DM device parameters, as well as target specific attributes, during table load. Compute the hash of the inactive table and store it for measurements during future state change. If a load is called multiple times, update the inactive table hash with the hash of the latest populated table. So that the correct inactive table hash is measured when the device transitions to different states like resume, remove, rename, etc. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 08:48:58 +08:00
memcpy(ima_buf + l, device_data_buf, device_data_buf_len);
l += device_data_buf_len;
/*
* If this iteration of the for loop turns out to be the last target
* in the table, dm_ima_measure_data("dm_table_load", ...) doesn't need
dm ima: measure data on table load DM configures a block device with various target specific attributes passed to it as a table. DM loads the table, and calls each target’s respective constructors with the attributes as input parameters. Some of these attributes are critical to ensure the device meets certain security bar. Thus, IMA should measure these attributes, to ensure they are not tampered with, during the lifetime of the device. So that the external services can have high confidence in the configuration of the block-devices on a given system. Some devices may have large tables. And a given device may change its state (table-load, suspend, resume, rename, remove, table-clear etc.) many times. Measuring these attributes each time when the device changes its state will significantly increase the size of the IMA logs. Further, once configured, these attributes are not expected to change unless a new table is loaded, or a device is removed and recreated. Therefore the clear-text of the attributes should only be measured during table load, and the hash of the active/inactive table should be measured for the remaining device state changes. Export IMA function ima_measure_critical_data() to allow measurement of DM device parameters, as well as target specific attributes, during table load. Compute the hash of the inactive table and store it for measurements during future state change. If a load is called multiple times, update the inactive table hash with the hash of the latest populated table. So that the correct inactive table hash is measured when the device transitions to different states like resume, remove, rename, etc. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 08:48:58 +08:00
* to be called again, just the hash needs to be finalized.
* "last_target_measured" tracks this state.
*/
last_target_measured = 1;
}
/*
* Fill-in all the target metadata, so that multiple targets for the same
* device can be linked together.
*/
memcpy(ima_buf + l, target_metadata_buf, target_metadata_buf_len);
l += target_metadata_buf_len;
memcpy(ima_buf + l, target_data_buf, target_data_buf_len);
l += target_data_buf_len;
}
if (!last_target_measured) {
dm_ima_measure_data(table_load_event_name, ima_buf, l, noio);
dm ima: measure data on table load DM configures a block device with various target specific attributes passed to it as a table. DM loads the table, and calls each target’s respective constructors with the attributes as input parameters. Some of these attributes are critical to ensure the device meets certain security bar. Thus, IMA should measure these attributes, to ensure they are not tampered with, during the lifetime of the device. So that the external services can have high confidence in the configuration of the block-devices on a given system. Some devices may have large tables. And a given device may change its state (table-load, suspend, resume, rename, remove, table-clear etc.) many times. Measuring these attributes each time when the device changes its state will significantly increase the size of the IMA logs. Further, once configured, these attributes are not expected to change unless a new table is loaded, or a device is removed and recreated. Therefore the clear-text of the attributes should only be measured during table load, and the hash of the active/inactive table should be measured for the remaining device state changes. Export IMA function ima_measure_critical_data() to allow measurement of DM device parameters, as well as target specific attributes, during table load. Compute the hash of the inactive table and store it for measurements during future state change. If a load is called multiple times, update the inactive table hash with the hash of the latest populated table. So that the correct inactive table hash is measured when the device transitions to different states like resume, remove, rename, etc. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 08:48:58 +08:00
r = crypto_shash_update(shash, (const u8 *)ima_buf, l);
if (r < 0)
goto error;
}
/*
* Finalize the table hash, and store it in table->md->ima.inactive_table.hash,
* so that the table data can be verified against the future device state change
* events, e.g. resume, rename, remove, table-clear etc.
*/
r = crypto_shash_final(shash, digest);
if (r < 0)
goto error;
digest_buf = dm_ima_alloc((digest_size*2) + hash_alg_prefix_len + 1, GFP_KERNEL, noio);
dm ima: measure data on table load DM configures a block device with various target specific attributes passed to it as a table. DM loads the table, and calls each target’s respective constructors with the attributes as input parameters. Some of these attributes are critical to ensure the device meets certain security bar. Thus, IMA should measure these attributes, to ensure they are not tampered with, during the lifetime of the device. So that the external services can have high confidence in the configuration of the block-devices on a given system. Some devices may have large tables. And a given device may change its state (table-load, suspend, resume, rename, remove, table-clear etc.) many times. Measuring these attributes each time when the device changes its state will significantly increase the size of the IMA logs. Further, once configured, these attributes are not expected to change unless a new table is loaded, or a device is removed and recreated. Therefore the clear-text of the attributes should only be measured during table load, and the hash of the active/inactive table should be measured for the remaining device state changes. Export IMA function ima_measure_critical_data() to allow measurement of DM device parameters, as well as target specific attributes, during table load. Compute the hash of the inactive table and store it for measurements during future state change. If a load is called multiple times, update the inactive table hash with the hash of the latest populated table. So that the correct inactive table hash is measured when the device transitions to different states like resume, remove, rename, etc. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 08:48:58 +08:00
if (!digest_buf)
goto error;
snprintf(digest_buf, hash_alg_prefix_len + 1, "%s:", DM_IMA_TABLE_HASH_ALG);
dm ima: measure data on table load DM configures a block device with various target specific attributes passed to it as a table. DM loads the table, and calls each target’s respective constructors with the attributes as input parameters. Some of these attributes are critical to ensure the device meets certain security bar. Thus, IMA should measure these attributes, to ensure they are not tampered with, during the lifetime of the device. So that the external services can have high confidence in the configuration of the block-devices on a given system. Some devices may have large tables. And a given device may change its state (table-load, suspend, resume, rename, remove, table-clear etc.) many times. Measuring these attributes each time when the device changes its state will significantly increase the size of the IMA logs. Further, once configured, these attributes are not expected to change unless a new table is loaded, or a device is removed and recreated. Therefore the clear-text of the attributes should only be measured during table load, and the hash of the active/inactive table should be measured for the remaining device state changes. Export IMA function ima_measure_critical_data() to allow measurement of DM device parameters, as well as target specific attributes, during table load. Compute the hash of the inactive table and store it for measurements during future state change. If a load is called multiple times, update the inactive table hash with the hash of the latest populated table. So that the correct inactive table hash is measured when the device transitions to different states like resume, remove, rename, etc. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 08:48:58 +08:00
for (i = 0; i < digest_size; i++)
snprintf((digest_buf + hash_alg_prefix_len + (i*2)), 3, "%02x", digest[i]);
dm ima: measure data on table load DM configures a block device with various target specific attributes passed to it as a table. DM loads the table, and calls each target’s respective constructors with the attributes as input parameters. Some of these attributes are critical to ensure the device meets certain security bar. Thus, IMA should measure these attributes, to ensure they are not tampered with, during the lifetime of the device. So that the external services can have high confidence in the configuration of the block-devices on a given system. Some devices may have large tables. And a given device may change its state (table-load, suspend, resume, rename, remove, table-clear etc.) many times. Measuring these attributes each time when the device changes its state will significantly increase the size of the IMA logs. Further, once configured, these attributes are not expected to change unless a new table is loaded, or a device is removed and recreated. Therefore the clear-text of the attributes should only be measured during table load, and the hash of the active/inactive table should be measured for the remaining device state changes. Export IMA function ima_measure_critical_data() to allow measurement of DM device parameters, as well as target specific attributes, during table load. Compute the hash of the inactive table and store it for measurements during future state change. If a load is called multiple times, update the inactive table hash with the hash of the latest populated table. So that the correct inactive table hash is measured when the device transitions to different states like resume, remove, rename, etc. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 08:48:58 +08:00
if (table->md->ima.active_table.hash != table->md->ima.inactive_table.hash)
kfree(table->md->ima.inactive_table.hash);
table->md->ima.inactive_table.hash = digest_buf;
table->md->ima.inactive_table.hash_len = strlen(digest_buf);
table->md->ima.inactive_table.num_targets = num_targets;
if (table->md->ima.active_table.device_metadata !=
table->md->ima.inactive_table.device_metadata)
kfree(table->md->ima.inactive_table.device_metadata);
table->md->ima.inactive_table.device_metadata = device_data_buf;
table->md->ima.inactive_table.device_metadata_len = device_data_buf_len;
goto exit;
error:
kfree(digest_buf);
kfree(device_data_buf);
exit:
kfree(digest);
if (tfm)
crypto_free_shash(tfm);
kfree(ima_buf);
kfree(target_metadata_buf);
kfree(target_data_buf);
}
/*
* Measure IMA data on device resume.
*/
void dm_ima_measure_on_device_resume(struct mapped_device *md, bool swap)
{
char *device_table_data, *dev_name = NULL, *dev_uuid = NULL, *capacity_str = NULL;
char active[] = "active_table_hash=";
unsigned int active_len = strlen(active), capacity_len = 0;
unsigned int l = 0;
bool noio = true;
bool nodata = true;
int r;
device_table_data = dm_ima_alloc(DM_IMA_DEVICE_BUF_LEN, GFP_KERNEL, noio);
if (!device_table_data)
return;
r = dm_ima_alloc_and_copy_capacity_str(md, &capacity_str, noio);
if (r)
goto error;
memcpy(device_table_data + l, DM_IMA_VERSION_STR, md->ima.dm_version_str_len);
l += md->ima.dm_version_str_len;
if (swap) {
if (md->ima.active_table.hash != md->ima.inactive_table.hash)
kfree(md->ima.active_table.hash);
md->ima.active_table.hash = NULL;
md->ima.active_table.hash_len = 0;
if (md->ima.active_table.device_metadata !=
md->ima.inactive_table.device_metadata)
kfree(md->ima.active_table.device_metadata);
md->ima.active_table.device_metadata = NULL;
md->ima.active_table.device_metadata_len = 0;
md->ima.active_table.num_targets = 0;
if (md->ima.inactive_table.hash) {
md->ima.active_table.hash = md->ima.inactive_table.hash;
md->ima.active_table.hash_len = md->ima.inactive_table.hash_len;
md->ima.inactive_table.hash = NULL;
md->ima.inactive_table.hash_len = 0;
}
if (md->ima.inactive_table.device_metadata) {
md->ima.active_table.device_metadata =
md->ima.inactive_table.device_metadata;
md->ima.active_table.device_metadata_len =
md->ima.inactive_table.device_metadata_len;
md->ima.active_table.num_targets = md->ima.inactive_table.num_targets;
md->ima.inactive_table.device_metadata = NULL;
md->ima.inactive_table.device_metadata_len = 0;
md->ima.inactive_table.num_targets = 0;
}
}
if (md->ima.active_table.device_metadata) {
memcpy(device_table_data + l, md->ima.active_table.device_metadata,
md->ima.active_table.device_metadata_len);
l += md->ima.active_table.device_metadata_len;
nodata = false;
}
if (md->ima.active_table.hash) {
memcpy(device_table_data + l, active, active_len);
l += active_len;
memcpy(device_table_data + l, md->ima.active_table.hash,
md->ima.active_table.hash_len);
l += md->ima.active_table.hash_len;
memcpy(device_table_data + l, ";", 1);
l++;
nodata = false;
}
if (nodata) {
r = dm_ima_alloc_and_copy_name_uuid(md, &dev_name, &dev_uuid, noio);
if (r)
goto error;
scnprintf(device_table_data, DM_IMA_DEVICE_BUF_LEN,
"%sname=%s,uuid=%s;device_resume=no_data;",
DM_IMA_VERSION_STR, dev_name, dev_uuid);
l = strlen(device_table_data);
}
capacity_len = strlen(capacity_str);
memcpy(device_table_data + l, capacity_str, capacity_len);
l += capacity_len;
dm_ima_measure_data("dm_device_resume", device_table_data, l, noio);
kfree(dev_name);
kfree(dev_uuid);
error:
kfree(capacity_str);
kfree(device_table_data);
}
/*
* Measure IMA data on remove.
*/
void dm_ima_measure_on_device_remove(struct mapped_device *md, bool remove_all)
{
char *device_table_data, *dev_name = NULL, *dev_uuid = NULL, *capacity_str = NULL;
char active_table_str[] = "active_table_hash=";
char inactive_table_str[] = "inactive_table_hash=";
char device_active_str[] = "device_active_metadata=";
char device_inactive_str[] = "device_inactive_metadata=";
char remove_all_str[] = "remove_all=";
unsigned int active_table_len = strlen(active_table_str);
unsigned int inactive_table_len = strlen(inactive_table_str);
unsigned int device_active_len = strlen(device_active_str);
unsigned int device_inactive_len = strlen(device_inactive_str);
unsigned int remove_all_len = strlen(remove_all_str);
unsigned int capacity_len = 0;
unsigned int l = 0;
bool noio = true;
bool nodata = true;
int r;
device_table_data = dm_ima_alloc(DM_IMA_DEVICE_BUF_LEN*2, GFP_KERNEL, noio);
if (!device_table_data)
goto exit;
r = dm_ima_alloc_and_copy_capacity_str(md, &capacity_str, noio);
if (r) {
kfree(device_table_data);
goto exit;
}
memcpy(device_table_data + l, DM_IMA_VERSION_STR, md->ima.dm_version_str_len);
l += md->ima.dm_version_str_len;
if (md->ima.active_table.device_metadata) {
memcpy(device_table_data + l, device_active_str, device_active_len);
l += device_active_len;
memcpy(device_table_data + l, md->ima.active_table.device_metadata,
md->ima.active_table.device_metadata_len);
l += md->ima.active_table.device_metadata_len;
nodata = false;
}
if (md->ima.inactive_table.device_metadata) {
memcpy(device_table_data + l, device_inactive_str, device_inactive_len);
l += device_inactive_len;
memcpy(device_table_data + l, md->ima.inactive_table.device_metadata,
md->ima.inactive_table.device_metadata_len);
l += md->ima.inactive_table.device_metadata_len;
nodata = false;
}
if (md->ima.active_table.hash) {
memcpy(device_table_data + l, active_table_str, active_table_len);
l += active_table_len;
memcpy(device_table_data + l, md->ima.active_table.hash,
md->ima.active_table.hash_len);
l += md->ima.active_table.hash_len;
memcpy(device_table_data + l, ",", 1);
l++;
nodata = false;
}
if (md->ima.inactive_table.hash) {
memcpy(device_table_data + l, inactive_table_str, inactive_table_len);
l += inactive_table_len;
memcpy(device_table_data + l, md->ima.inactive_table.hash,
md->ima.inactive_table.hash_len);
l += md->ima.inactive_table.hash_len;
memcpy(device_table_data + l, ",", 1);
l++;
nodata = false;
}
/*
* In case both active and inactive tables, and corresponding
* device metadata is cleared/missing - record the name and uuid
* in IMA measurements.
*/
if (nodata) {
if (dm_ima_alloc_and_copy_name_uuid(md, &dev_name, &dev_uuid, noio))
goto error;
scnprintf(device_table_data, DM_IMA_DEVICE_BUF_LEN,
"%sname=%s,uuid=%s;device_remove=no_data;",
DM_IMA_VERSION_STR, dev_name, dev_uuid);
l = strlen(device_table_data);
}
memcpy(device_table_data + l, remove_all_str, remove_all_len);
l += remove_all_len;
memcpy(device_table_data + l, remove_all ? "y;" : "n;", 2);
l += 2;
capacity_len = strlen(capacity_str);
memcpy(device_table_data + l, capacity_str, capacity_len);
l += capacity_len;
dm_ima_measure_data("dm_device_remove", device_table_data, l, noio);
error:
kfree(device_table_data);
kfree(capacity_str);
exit:
kfree(md->ima.active_table.device_metadata);
if (md->ima.active_table.device_metadata !=
md->ima.inactive_table.device_metadata)
kfree(md->ima.inactive_table.device_metadata);
kfree(md->ima.active_table.hash);
if (md->ima.active_table.hash != md->ima.inactive_table.hash)
kfree(md->ima.inactive_table.hash);
dm_ima_reset_data(md);
kfree(dev_name);
kfree(dev_uuid);
}
/*
* Measure ima data on table clear.
*/
void dm_ima_measure_on_table_clear(struct mapped_device *md, bool new_map)
{
unsigned int l = 0, capacity_len = 0;
char *device_table_data = NULL, *dev_name = NULL, *dev_uuid = NULL, *capacity_str = NULL;
char inactive_str[] = "inactive_table_hash=";
unsigned int inactive_len = strlen(inactive_str);
bool noio = true;
bool nodata = true;
int r;
device_table_data = dm_ima_alloc(DM_IMA_DEVICE_BUF_LEN, GFP_KERNEL, noio);
if (!device_table_data)
return;
r = dm_ima_alloc_and_copy_capacity_str(md, &capacity_str, noio);
if (r)
goto error1;
memcpy(device_table_data + l, DM_IMA_VERSION_STR, md->ima.dm_version_str_len);
l += md->ima.dm_version_str_len;
if (md->ima.inactive_table.device_metadata_len &&
md->ima.inactive_table.hash_len) {
memcpy(device_table_data + l, md->ima.inactive_table.device_metadata,
md->ima.inactive_table.device_metadata_len);
l += md->ima.inactive_table.device_metadata_len;
memcpy(device_table_data + l, inactive_str, inactive_len);
l += inactive_len;
memcpy(device_table_data + l, md->ima.inactive_table.hash,
md->ima.inactive_table.hash_len);
l += md->ima.inactive_table.hash_len;
memcpy(device_table_data + l, ";", 1);
l++;
nodata = false;
}
if (nodata) {
if (dm_ima_alloc_and_copy_name_uuid(md, &dev_name, &dev_uuid, noio))
goto error2;
scnprintf(device_table_data, DM_IMA_DEVICE_BUF_LEN,
"%sname=%s,uuid=%s;table_clear=no_data;",
DM_IMA_VERSION_STR, dev_name, dev_uuid);
l = strlen(device_table_data);
}
capacity_len = strlen(capacity_str);
memcpy(device_table_data + l, capacity_str, capacity_len);
l += capacity_len;
dm_ima_measure_data("dm_table_clear", device_table_data, l, noio);
if (new_map) {
if (md->ima.inactive_table.hash &&
md->ima.inactive_table.hash != md->ima.active_table.hash)
kfree(md->ima.inactive_table.hash);
md->ima.inactive_table.hash = NULL;
md->ima.inactive_table.hash_len = 0;
if (md->ima.inactive_table.device_metadata &&
md->ima.inactive_table.device_metadata != md->ima.active_table.device_metadata)
kfree(md->ima.inactive_table.device_metadata);
md->ima.inactive_table.device_metadata = NULL;
md->ima.inactive_table.device_metadata_len = 0;
md->ima.inactive_table.num_targets = 0;
if (md->ima.active_table.hash) {
md->ima.inactive_table.hash = md->ima.active_table.hash;
md->ima.inactive_table.hash_len = md->ima.active_table.hash_len;
}
if (md->ima.active_table.device_metadata) {
md->ima.inactive_table.device_metadata =
md->ima.active_table.device_metadata;
md->ima.inactive_table.device_metadata_len =
md->ima.active_table.device_metadata_len;
md->ima.inactive_table.num_targets =
md->ima.active_table.num_targets;
}
}
kfree(dev_name);
kfree(dev_uuid);
error2:
kfree(capacity_str);
error1:
kfree(device_table_data);
}
/*
* Measure IMA data on device rename.
*/
void dm_ima_measure_on_device_rename(struct mapped_device *md)
{
char *old_device_data = NULL, *new_device_data = NULL, *combined_device_data = NULL;
char *new_dev_name = NULL, *new_dev_uuid = NULL, *capacity_str = NULL;
bool noio = true;
int r;
if (dm_ima_alloc_and_copy_device_data(md, &new_device_data,
md->ima.active_table.num_targets, noio))
return;
if (dm_ima_alloc_and_copy_name_uuid(md, &new_dev_name, &new_dev_uuid, noio))
goto error;
combined_device_data = dm_ima_alloc(DM_IMA_DEVICE_BUF_LEN * 2, GFP_KERNEL, noio);
if (!combined_device_data)
goto error;
r = dm_ima_alloc_and_copy_capacity_str(md, &capacity_str, noio);
if (r)
goto error;
old_device_data = md->ima.active_table.device_metadata;
md->ima.active_table.device_metadata = new_device_data;
md->ima.active_table.device_metadata_len = strlen(new_device_data);
scnprintf(combined_device_data, DM_IMA_DEVICE_BUF_LEN * 2,
"%s%snew_name=%s,new_uuid=%s;%s", DM_IMA_VERSION_STR, old_device_data,
new_dev_name, new_dev_uuid, capacity_str);
dm_ima_measure_data("dm_device_rename", combined_device_data, strlen(combined_device_data),
noio);
goto exit;
error:
kfree(new_device_data);
exit:
kfree(capacity_str);
kfree(combined_device_data);
kfree(old_device_data);
kfree(new_dev_name);
kfree(new_dev_uuid);
}