UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/infiniband/core/multicast.c

899 lines
23 KiB
C
Raw Normal View History

IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
/*
IB: Remove garbage non-ASCII characters from comments A few files had 0xa0 characters in comments. Remove them so that the files are clean ASCII text. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-10 07:17:32 +08:00
* Copyright (c) 2006 Intel Corporation. All rights reserved.
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/completion.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/interrupt.h>
infiniband: add in export.h for files using EXPORT_SYMBOL/THIS_MODULE These were getting it implicitly via device.h --> module.h but we are going to stop that when we clean up the headers. Fix these in advance so the tree remains biscect-clean. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-28 03:29:33 +08:00
#include <linux/export.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
#include <linux/bitops.h>
#include <linux/random.h>
#include <rdma/ib_cache.h>
#include "sa.h"
static void mcast_add_one(struct ib_device *device);
IB/core: lock client data with lists_rwsem An ib_client callback that is called with the lists_rwsem locked only for read is protected from changes to the IB client lists, but not from ib_unregister_device() freeing its client data. This is because ib_unregister_device() will remove the device from the device list with lists_rwsem locked for write, but perform the rest of the cleanup, including the call to remove() without that lock. Mark client data that is undergoing de-registration with a new going_down flag in the client data context. Lock the client data list with lists_rwsem for write in addition to using the spinlock, so that functions calling the callback would be able to lock only lists_rwsem for read and let callbacks sleep. Since ib_unregister_client() now marks the client data context, no need for remove() to search the context again, so pass the client data directly to remove() callbacks. Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 22:50:14 +08:00
static void mcast_remove_one(struct ib_device *device, void *client_data);
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
static struct ib_client mcast_client = {
.name = "ib_multicast",
.add = mcast_add_one,
.remove = mcast_remove_one
};
static struct ib_sa_client sa_client;
static struct workqueue_struct *mcast_wq;
static union ib_gid mgid0;
struct mcast_device;
struct mcast_port {
struct mcast_device *dev;
spinlock_t lock;
struct rb_root table;
atomic_t refcount;
struct completion comp;
u8 port_num;
};
struct mcast_device {
struct ib_device *device;
struct ib_event_handler event_handler;
int start_port;
int end_port;
struct mcast_port port[0];
};
enum mcast_state {
MCAST_JOINING,
MCAST_MEMBER,
IB/multicast: Report errors on multicast groups if P_key changes P_key changes can invalidate multicast groups. Report errors on all multicast groups affected by a pkey change. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-23 12:52:54 +08:00
MCAST_ERROR,
};
enum mcast_group_state {
MCAST_IDLE,
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
MCAST_BUSY,
IB/multicast: Report errors on multicast groups if P_key changes P_key changes can invalidate multicast groups. Report errors on all multicast groups affected by a pkey change. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-23 12:52:54 +08:00
MCAST_GROUP_ERROR,
MCAST_PKEY_EVENT
};
enum {
MCAST_INVALID_PKEY_INDEX = 0xFFFF
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
};
struct mcast_member;
struct mcast_group {
struct ib_sa_mcmember_rec rec;
struct rb_node node;
struct mcast_port *port;
spinlock_t lock;
struct work_struct work;
struct list_head pending_list;
struct list_head active_list;
struct mcast_member *last_join;
IB/core: Support new type of join-state for multicast There are four types for MCG, FullMember, NonMember, SendOnlyNonMember, and the new added type: SendOnlyFullMember. Add support for the new SendOnlyFullMember join state. The new type allows host to send join request as sendonly, it will cause the group to be created but without getting packets from this multicast back to the host. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Christoph Lameter <cl@linux.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-26 03:02:06 +08:00
int members[NUM_JOIN_MEMBERSHIP_TYPES];
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
atomic_t refcount;
IB/multicast: Report errors on multicast groups if P_key changes P_key changes can invalidate multicast groups. Report errors on all multicast groups affected by a pkey change. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-23 12:52:54 +08:00
enum mcast_group_state state;
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
struct ib_sa_query *query;
IB/multicast: Report errors on multicast groups if P_key changes P_key changes can invalidate multicast groups. Report errors on all multicast groups affected by a pkey change. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-23 12:52:54 +08:00
u16 pkey_index;
IB/core: Fix send multicast group leave retry Until now, retries were only sent when joining a multicast group. This patch will adds retries when leaving a multicast group as well. Signed-off-by: Ron Livne <ronli@voltaire.com> Signed-off-by: Yossi Etigin <yosefe@voltaire.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-06 11:24:24 +08:00
u8 leave_state;
int retries;
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
};
struct mcast_member {
struct ib_sa_multicast multicast;
struct ib_sa_client *client;
struct mcast_group *group;
struct list_head list;
enum mcast_state state;
atomic_t refcount;
struct completion comp;
};
static void join_handler(int status, struct ib_sa_mcmember_rec *rec,
void *context);
static void leave_handler(int status, struct ib_sa_mcmember_rec *rec,
void *context);
static struct mcast_group *mcast_find(struct mcast_port *port,
union ib_gid *mgid)
{
struct rb_node *node = port->table.rb_node;
struct mcast_group *group;
int ret;
while (node) {
group = rb_entry(node, struct mcast_group, node);
ret = memcmp(mgid->raw, group->rec.mgid.raw, sizeof *mgid);
if (!ret)
return group;
if (ret < 0)
node = node->rb_left;
else
node = node->rb_right;
}
return NULL;
}
static struct mcast_group *mcast_insert(struct mcast_port *port,
struct mcast_group *group,
int allow_duplicates)
{
struct rb_node **link = &port->table.rb_node;
struct rb_node *parent = NULL;
struct mcast_group *cur_group;
int ret;
while (*link) {
parent = *link;
cur_group = rb_entry(parent, struct mcast_group, node);
ret = memcmp(group->rec.mgid.raw, cur_group->rec.mgid.raw,
sizeof group->rec.mgid);
if (ret < 0)
link = &(*link)->rb_left;
else if (ret > 0)
link = &(*link)->rb_right;
else if (allow_duplicates)
link = &(*link)->rb_left;
else
return cur_group;
}
rb_link_node(&group->node, parent, link);
rb_insert_color(&group->node, &port->table);
return NULL;
}
static void deref_port(struct mcast_port *port)
{
if (atomic_dec_and_test(&port->refcount))
complete(&port->comp);
}
static void release_group(struct mcast_group *group)
{
struct mcast_port *port = group->port;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
if (atomic_dec_and_test(&group->refcount)) {
rb_erase(&group->node, &port->table);
spin_unlock_irqrestore(&port->lock, flags);
kfree(group);
deref_port(port);
} else
spin_unlock_irqrestore(&port->lock, flags);
}
static void deref_member(struct mcast_member *member)
{
if (atomic_dec_and_test(&member->refcount))
complete(&member->comp);
}
static void queue_join(struct mcast_member *member)
{
struct mcast_group *group = member->group;
unsigned long flags;
spin_lock_irqsave(&group->lock, flags);
IB/core: Fix handling of multicast response failures I was looking at the code for multicast.c and noticed that ib_sa_join_multicast() calls queue_join() which puts the request at the front of the group->pending_list. If this is a second request, it seems like it would interfere with process_join_error() since group->last_join won't point to the member at the head of the pending_list. The sequence would thus be: 1. ib_sa_join_multicast() puts member1 on head of pending_list and starts work thread 2. mcast_work_handler() calls send_join() which sets group->last_join to member1 3. ib_sa_join_multicast() puts member2 on head of pending_list 4. join operation for member1 receives failures response from SA. 5. join_handler() is called with error status 6. process_join_error() fails to process member1 since it doesn't match the first entry in the group->pending_list. The impact is that the failed join request is tossed. The second request is processed, and after it completes, the original request ends up being retried. This change also results in join requests being processed in FIFO order. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-09-21 07:33:44 +08:00
list_add_tail(&member->list, &group->pending_list);
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
if (group->state == MCAST_IDLE) {
group->state = MCAST_BUSY;
atomic_inc(&group->refcount);
queue_work(mcast_wq, &group->work);
}
spin_unlock_irqrestore(&group->lock, flags);
}
/*
IB/core: Support new type of join-state for multicast There are four types for MCG, FullMember, NonMember, SendOnlyNonMember, and the new added type: SendOnlyFullMember. Add support for the new SendOnlyFullMember join state. The new type allows host to send join request as sendonly, it will cause the group to be created but without getting packets from this multicast back to the host. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Christoph Lameter <cl@linux.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-26 03:02:06 +08:00
* A multicast group has four types of members: full member, non member,
* sendonly non member and sendonly full member.
* We need to keep track of the number of members of each
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
* type based on their join state. Adjust the number of members the belong to
* the specified join states.
*/
static void adjust_membership(struct mcast_group *group, u8 join_state, int inc)
{
int i;
IB/core: Support new type of join-state for multicast There are four types for MCG, FullMember, NonMember, SendOnlyNonMember, and the new added type: SendOnlyFullMember. Add support for the new SendOnlyFullMember join state. The new type allows host to send join request as sendonly, it will cause the group to be created but without getting packets from this multicast back to the host. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Christoph Lameter <cl@linux.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-26 03:02:06 +08:00
for (i = 0; i < NUM_JOIN_MEMBERSHIP_TYPES; i++, join_state >>= 1)
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
if (join_state & 0x1)
group->members[i] += inc;
}
/*
* If a multicast group has zero members left for a particular join state, but
* the group is still a member with the SA, we need to leave that join state.
* Determine which join states we still belong to, but that do not have any
* active members.
*/
static u8 get_leave_state(struct mcast_group *group)
{
u8 leave_state = 0;
int i;
IB/core: Support new type of join-state for multicast There are four types for MCG, FullMember, NonMember, SendOnlyNonMember, and the new added type: SendOnlyFullMember. Add support for the new SendOnlyFullMember join state. The new type allows host to send join request as sendonly, it will cause the group to be created but without getting packets from this multicast back to the host. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Christoph Lameter <cl@linux.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-26 03:02:06 +08:00
for (i = 0; i < NUM_JOIN_MEMBERSHIP_TYPES; i++)
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
if (!group->members[i])
leave_state |= (0x1 << i);
return leave_state & group->rec.join_state;
}
static int check_selector(ib_sa_comp_mask comp_mask,
ib_sa_comp_mask selector_mask,
ib_sa_comp_mask value_mask,
u8 selector, u8 src_value, u8 dst_value)
{
int err;
if (!(comp_mask & selector_mask) || !(comp_mask & value_mask))
return 0;
switch (selector) {
case IB_SA_GT:
err = (src_value <= dst_value);
break;
case IB_SA_LT:
err = (src_value >= dst_value);
break;
case IB_SA_EQ:
err = (src_value != dst_value);
break;
default:
err = 0;
break;
}
return err;
}
static int cmp_rec(struct ib_sa_mcmember_rec *src,
struct ib_sa_mcmember_rec *dst, ib_sa_comp_mask comp_mask)
{
/* MGID must already match */
if (comp_mask & IB_SA_MCMEMBER_REC_PORT_GID &&
memcmp(&src->port_gid, &dst->port_gid, sizeof src->port_gid))
return -EINVAL;
if (comp_mask & IB_SA_MCMEMBER_REC_QKEY && src->qkey != dst->qkey)
return -EINVAL;
if (comp_mask & IB_SA_MCMEMBER_REC_MLID && src->mlid != dst->mlid)
return -EINVAL;
if (check_selector(comp_mask, IB_SA_MCMEMBER_REC_MTU_SELECTOR,
IB_SA_MCMEMBER_REC_MTU, dst->mtu_selector,
src->mtu, dst->mtu))
return -EINVAL;
if (comp_mask & IB_SA_MCMEMBER_REC_TRAFFIC_CLASS &&
src->traffic_class != dst->traffic_class)
return -EINVAL;
if (comp_mask & IB_SA_MCMEMBER_REC_PKEY && src->pkey != dst->pkey)
return -EINVAL;
if (check_selector(comp_mask, IB_SA_MCMEMBER_REC_RATE_SELECTOR,
IB_SA_MCMEMBER_REC_RATE, dst->rate_selector,
src->rate, dst->rate))
return -EINVAL;
if (check_selector(comp_mask,
IB_SA_MCMEMBER_REC_PACKET_LIFE_TIME_SELECTOR,
IB_SA_MCMEMBER_REC_PACKET_LIFE_TIME,
dst->packet_life_time_selector,
src->packet_life_time, dst->packet_life_time))
return -EINVAL;
if (comp_mask & IB_SA_MCMEMBER_REC_SL && src->sl != dst->sl)
return -EINVAL;
if (comp_mask & IB_SA_MCMEMBER_REC_FLOW_LABEL &&
src->flow_label != dst->flow_label)
return -EINVAL;
if (comp_mask & IB_SA_MCMEMBER_REC_HOP_LIMIT &&
src->hop_limit != dst->hop_limit)
return -EINVAL;
if (comp_mask & IB_SA_MCMEMBER_REC_SCOPE && src->scope != dst->scope)
return -EINVAL;
/* join_state checked separately, proxy_join ignored */
return 0;
}
static int send_join(struct mcast_group *group, struct mcast_member *member)
{
struct mcast_port *port = group->port;
int ret;
group->last_join = member;
ret = ib_sa_mcmember_rec_query(&sa_client, port->dev->device,
port->port_num, IB_MGMT_METHOD_SET,
&member->multicast.rec,
member->multicast.comp_mask,
3000, GFP_KERNEL, join_handler, group,
&group->query);
IB/core: Fix use after free in send_leave function The function send_leave sets the member: group->query_id (group->query_id = ret) after calling the sa_query, but leave_handler can be executed before the setting and it might delete the group object, and will get a memory corruption. Additionally, this patch gets rid of group->query_id variable which is not used. Fixes: faec2f7b96b5 ('IB/sa: Track multicast join/leave requests') Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-28 15:58:30 +08:00
return (ret > 0) ? 0 : ret;
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
}
static int send_leave(struct mcast_group *group, u8 leave_state)
{
struct mcast_port *port = group->port;
struct ib_sa_mcmember_rec rec;
int ret;
rec = group->rec;
rec.join_state = leave_state;
IB/core: Fix send multicast group leave retry Until now, retries were only sent when joining a multicast group. This patch will adds retries when leaving a multicast group as well. Signed-off-by: Ron Livne <ronli@voltaire.com> Signed-off-by: Yossi Etigin <yosefe@voltaire.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-06 11:24:24 +08:00
group->leave_state = leave_state;
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
ret = ib_sa_mcmember_rec_query(&sa_client, port->dev->device,
port->port_num, IB_SA_METHOD_DELETE, &rec,
IB_SA_MCMEMBER_REC_MGID |
IB_SA_MCMEMBER_REC_PORT_GID |
IB_SA_MCMEMBER_REC_JOIN_STATE,
3000, GFP_KERNEL, leave_handler,
group, &group->query);
IB/core: Fix use after free in send_leave function The function send_leave sets the member: group->query_id (group->query_id = ret) after calling the sa_query, but leave_handler can be executed before the setting and it might delete the group object, and will get a memory corruption. Additionally, this patch gets rid of group->query_id variable which is not used. Fixes: faec2f7b96b5 ('IB/sa: Track multicast join/leave requests') Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-28 15:58:30 +08:00
return (ret > 0) ? 0 : ret;
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
}
static void join_group(struct mcast_group *group, struct mcast_member *member,
u8 join_state)
{
member->state = MCAST_MEMBER;
adjust_membership(group, join_state, 1);
group->rec.join_state |= join_state;
member->multicast.rec = group->rec;
member->multicast.rec.join_state = join_state;
list_move(&member->list, &group->active_list);
}
static int fail_join(struct mcast_group *group, struct mcast_member *member,
int status)
{
spin_lock_irq(&group->lock);
list_del_init(&member->list);
spin_unlock_irq(&group->lock);
return member->multicast.callback(status, &member->multicast);
}
static void process_group_error(struct mcast_group *group)
{
struct mcast_member *member;
IB/multicast: Report errors on multicast groups if P_key changes P_key changes can invalidate multicast groups. Report errors on all multicast groups affected by a pkey change. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-23 12:52:54 +08:00
int ret = 0;
u16 pkey_index;
if (group->state == MCAST_PKEY_EVENT)
ret = ib_find_pkey(group->port->dev->device,
group->port->port_num,
be16_to_cpu(group->rec.pkey), &pkey_index);
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
spin_lock_irq(&group->lock);
IB/multicast: Report errors on multicast groups if P_key changes P_key changes can invalidate multicast groups. Report errors on all multicast groups affected by a pkey change. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-23 12:52:54 +08:00
if (group->state == MCAST_PKEY_EVENT && !ret &&
group->pkey_index == pkey_index)
goto out;
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
while (!list_empty(&group->active_list)) {
member = list_entry(group->active_list.next,
struct mcast_member, list);
atomic_inc(&member->refcount);
list_del_init(&member->list);
adjust_membership(group, member->multicast.rec.join_state, -1);
member->state = MCAST_ERROR;
spin_unlock_irq(&group->lock);
ret = member->multicast.callback(-ENETRESET,
&member->multicast);
deref_member(member);
if (ret)
ib_sa_free_multicast(&member->multicast);
spin_lock_irq(&group->lock);
}
group->rec.join_state = 0;
IB/multicast: Report errors on multicast groups if P_key changes P_key changes can invalidate multicast groups. Report errors on all multicast groups affected by a pkey change. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-23 12:52:54 +08:00
out:
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
group->state = MCAST_BUSY;
spin_unlock_irq(&group->lock);
}
static void mcast_work_handler(struct work_struct *work)
{
struct mcast_group *group;
struct mcast_member *member;
struct ib_sa_multicast *multicast;
int status, ret;
u8 join_state;
group = container_of(work, typeof(*group), work);
retest:
spin_lock_irq(&group->lock);
while (!list_empty(&group->pending_list) ||
IB/multicast: Report errors on multicast groups if P_key changes P_key changes can invalidate multicast groups. Report errors on all multicast groups affected by a pkey change. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-23 12:52:54 +08:00
(group->state != MCAST_BUSY)) {
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
IB/multicast: Report errors on multicast groups if P_key changes P_key changes can invalidate multicast groups. Report errors on all multicast groups affected by a pkey change. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-23 12:52:54 +08:00
if (group->state != MCAST_BUSY) {
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
spin_unlock_irq(&group->lock);
process_group_error(group);
goto retest;
}
member = list_entry(group->pending_list.next,
struct mcast_member, list);
multicast = &member->multicast;
join_state = multicast->rec.join_state;
atomic_inc(&member->refcount);
if (join_state == (group->rec.join_state & join_state)) {
status = cmp_rec(&group->rec, &multicast->rec,
multicast->comp_mask);
if (!status)
join_group(group, member, join_state);
else
list_del_init(&member->list);
spin_unlock_irq(&group->lock);
ret = multicast->callback(status, multicast);
} else {
spin_unlock_irq(&group->lock);
status = send_join(group, member);
if (!status) {
deref_member(member);
return;
}
ret = fail_join(group, member, status);
}
deref_member(member);
if (ret)
ib_sa_free_multicast(&member->multicast);
spin_lock_irq(&group->lock);
}
join_state = get_leave_state(group);
if (join_state) {
group->rec.join_state &= ~join_state;
spin_unlock_irq(&group->lock);
if (send_leave(group, join_state))
goto retest;
} else {
group->state = MCAST_IDLE;
spin_unlock_irq(&group->lock);
release_group(group);
}
}
/*
* Fail a join request if it is still active - at the head of the pending queue.
*/
static void process_join_error(struct mcast_group *group, int status)
{
struct mcast_member *member;
int ret;
spin_lock_irq(&group->lock);
member = list_entry(group->pending_list.next,
struct mcast_member, list);
if (group->last_join == member) {
atomic_inc(&member->refcount);
list_del_init(&member->list);
spin_unlock_irq(&group->lock);
ret = member->multicast.callback(status, &member->multicast);
deref_member(member);
if (ret)
ib_sa_free_multicast(&member->multicast);
} else
spin_unlock_irq(&group->lock);
}
static void join_handler(int status, struct ib_sa_mcmember_rec *rec,
void *context)
{
struct mcast_group *group = context;
IB/multicast: Report errors on multicast groups if P_key changes P_key changes can invalidate multicast groups. Report errors on all multicast groups affected by a pkey change. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-23 12:52:54 +08:00
u16 pkey_index = MCAST_INVALID_PKEY_INDEX;
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
if (status)
process_join_error(group, status);
else {
IB/core: Fix mgid key handling in SA agent multicast data-base Applications can request that the SM assign an MGID by passing a mcast member request containing MGID = 0. When the SM responds by sending the allocated MGID, this MGID replaces the 0-MGID in the multicast group. However, the MGID field in the group is also the key field in the IB core multicast code rbtree containing the multicast groups for the port. Since this is a key field, correct handling requires that the group entry be deleted from the rbtree and then re-inserted with the new key, so that the table structure is properly maintained. The current code does not do this correctly. Correct operation requires that if the key-field gid has changed at all, it should be deleted and re-inserted. Note that when inserting, if the new MGID is zero (not the case here but the code should handle this correctly), we allow duplicate entries for 0-MGIDs. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-11-19 17:08:58 +08:00
int mgids_changed, is_mgid0;
IB/multicast: Check ib_find_pkey() return value This patch avoids that Coverity complains about not checking the ib_find_pkey() return value. Fixes: commit 547af76521b3 ("IB/multicast: Report errors on multicast groups if P_key changes") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-22 02:22:17 +08:00
if (ib_find_pkey(group->port->dev->device,
group->port->port_num, be16_to_cpu(rec->pkey),
&pkey_index))
pkey_index = MCAST_INVALID_PKEY_INDEX;
IB/multicast: Report errors on multicast groups if P_key changes P_key changes can invalidate multicast groups. Report errors on all multicast groups affected by a pkey change. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-23 12:52:54 +08:00
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
spin_lock_irq(&group->port->lock);
IB/multicast: Report errors on multicast groups if P_key changes P_key changes can invalidate multicast groups. Report errors on all multicast groups affected by a pkey change. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-23 12:52:54 +08:00
if (group->state == MCAST_BUSY &&
group->pkey_index == MCAST_INVALID_PKEY_INDEX)
group->pkey_index = pkey_index;
IB/core: Fix mgid key handling in SA agent multicast data-base Applications can request that the SM assign an MGID by passing a mcast member request containing MGID = 0. When the SM responds by sending the allocated MGID, this MGID replaces the 0-MGID in the multicast group. However, the MGID field in the group is also the key field in the IB core multicast code rbtree containing the multicast groups for the port. Since this is a key field, correct handling requires that the group entry be deleted from the rbtree and then re-inserted with the new key, so that the table structure is properly maintained. The current code does not do this correctly. Correct operation requires that if the key-field gid has changed at all, it should be deleted and re-inserted. Note that when inserting, if the new MGID is zero (not the case here but the code should handle this correctly), we allow duplicate entries for 0-MGIDs. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-11-19 17:08:58 +08:00
mgids_changed = memcmp(&rec->mgid, &group->rec.mgid,
sizeof(group->rec.mgid));
group->rec = *rec;
if (mgids_changed) {
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
rb_erase(&group->node, &group->port->table);
IB/core: Fix mgid key handling in SA agent multicast data-base Applications can request that the SM assign an MGID by passing a mcast member request containing MGID = 0. When the SM responds by sending the allocated MGID, this MGID replaces the 0-MGID in the multicast group. However, the MGID field in the group is also the key field in the IB core multicast code rbtree containing the multicast groups for the port. Since this is a key field, correct handling requires that the group entry be deleted from the rbtree and then re-inserted with the new key, so that the table structure is properly maintained. The current code does not do this correctly. Correct operation requires that if the key-field gid has changed at all, it should be deleted and re-inserted. Note that when inserting, if the new MGID is zero (not the case here but the code should handle this correctly), we allow duplicate entries for 0-MGIDs. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-11-19 17:08:58 +08:00
is_mgid0 = !memcmp(&mgid0, &group->rec.mgid,
sizeof(mgid0));
mcast_insert(group->port, group, is_mgid0);
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
}
spin_unlock_irq(&group->port->lock);
}
mcast_work_handler(&group->work);
}
static void leave_handler(int status, struct ib_sa_mcmember_rec *rec,
void *context)
{
struct mcast_group *group = context;
IB/core: Fix send multicast group leave retry Until now, retries were only sent when joining a multicast group. This patch will adds retries when leaving a multicast group as well. Signed-off-by: Ron Livne <ronli@voltaire.com> Signed-off-by: Yossi Etigin <yosefe@voltaire.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-06 11:24:24 +08:00
if (status && group->retries > 0 &&
!send_leave(group, group->leave_state))
group->retries--;
else
mcast_work_handler(&group->work);
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
}
static struct mcast_group *acquire_group(struct mcast_port *port,
union ib_gid *mgid, gfp_t gfp_mask)
{
struct mcast_group *group, *cur_group;
unsigned long flags;
int is_mgid0;
is_mgid0 = !memcmp(&mgid0, mgid, sizeof mgid0);
if (!is_mgid0) {
spin_lock_irqsave(&port->lock, flags);
group = mcast_find(port, mgid);
if (group)
goto found;
spin_unlock_irqrestore(&port->lock, flags);
}
group = kzalloc(sizeof *group, gfp_mask);
if (!group)
return NULL;
IB/core: Fix send multicast group leave retry Until now, retries were only sent when joining a multicast group. This patch will adds retries when leaving a multicast group as well. Signed-off-by: Ron Livne <ronli@voltaire.com> Signed-off-by: Yossi Etigin <yosefe@voltaire.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-06 11:24:24 +08:00
group->retries = 3;
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
group->port = port;
group->rec.mgid = *mgid;
IB/multicast: Report errors on multicast groups if P_key changes P_key changes can invalidate multicast groups. Report errors on all multicast groups affected by a pkey change. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-23 12:52:54 +08:00
group->pkey_index = MCAST_INVALID_PKEY_INDEX;
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
INIT_LIST_HEAD(&group->pending_list);
INIT_LIST_HEAD(&group->active_list);
INIT_WORK(&group->work, mcast_work_handler);
spin_lock_init(&group->lock);
spin_lock_irqsave(&port->lock, flags);
cur_group = mcast_insert(port, group, is_mgid0);
if (cur_group) {
kfree(group);
group = cur_group;
} else
atomic_inc(&port->refcount);
found:
atomic_inc(&group->refcount);
spin_unlock_irqrestore(&port->lock, flags);
return group;
}
/*
* We serialize all join requests to a single group to make our lives much
* easier. Otherwise, two users could try to join the same group
* simultaneously, with different configurations, one could leave while the
* join is in progress, etc., which makes locking around error recovery
* difficult.
*/
struct ib_sa_multicast *
ib_sa_join_multicast(struct ib_sa_client *client,
struct ib_device *device, u8 port_num,
struct ib_sa_mcmember_rec *rec,
ib_sa_comp_mask comp_mask, gfp_t gfp_mask,
int (*callback)(int status,
struct ib_sa_multicast *multicast),
void *context)
{
struct mcast_device *dev;
struct mcast_member *member;
struct ib_sa_multicast *multicast;
int ret;
dev = ib_get_client_data(device, &mcast_client);
if (!dev)
return ERR_PTR(-ENODEV);
member = kmalloc(sizeof *member, gfp_mask);
if (!member)
return ERR_PTR(-ENOMEM);
ib_sa_client_get(client);
member->client = client;
member->multicast.rec = *rec;
member->multicast.comp_mask = comp_mask;
member->multicast.callback = callback;
member->multicast.context = context;
init_completion(&member->comp);
atomic_set(&member->refcount, 1);
member->state = MCAST_JOINING;
member->group = acquire_group(&dev->port[port_num - dev->start_port],
&rec->mgid, gfp_mask);
if (!member->group) {
ret = -ENOMEM;
goto err;
}
/*
* The user will get the multicast structure in their callback. They
* could then free the multicast structure before we can return from
* this routine. So we save the pointer to return before queuing
* any callback.
*/
multicast = &member->multicast;
queue_join(member);
return multicast;
err:
ib_sa_client_put(client);
kfree(member);
return ERR_PTR(ret);
}
EXPORT_SYMBOL(ib_sa_join_multicast);
void ib_sa_free_multicast(struct ib_sa_multicast *multicast)
{
struct mcast_member *member;
struct mcast_group *group;
member = container_of(multicast, struct mcast_member, multicast);
group = member->group;
spin_lock_irq(&group->lock);
if (member->state == MCAST_MEMBER)
adjust_membership(group, multicast->rec.join_state, -1);
list_del_init(&member->list);
if (group->state == MCAST_IDLE) {
group->state = MCAST_BUSY;
spin_unlock_irq(&group->lock);
/* Continue to hold reference on group until callback */
queue_work(mcast_wq, &group->work);
} else {
spin_unlock_irq(&group->lock);
release_group(group);
}
deref_member(member);
wait_for_completion(&member->comp);
ib_sa_client_put(member->client);
kfree(member);
}
EXPORT_SYMBOL(ib_sa_free_multicast);
int ib_sa_get_mcmember_rec(struct ib_device *device, u8 port_num,
union ib_gid *mgid, struct ib_sa_mcmember_rec *rec)
{
struct mcast_device *dev;
struct mcast_port *port;
struct mcast_group *group;
unsigned long flags;
int ret = 0;
dev = ib_get_client_data(device, &mcast_client);
if (!dev)
return -ENODEV;
port = &dev->port[port_num - dev->start_port];
spin_lock_irqsave(&port->lock, flags);
group = mcast_find(port, mgid);
if (group)
*rec = group->rec;
else
ret = -EADDRNOTAVAIL;
spin_unlock_irqrestore(&port->lock, flags);
return ret;
}
EXPORT_SYMBOL(ib_sa_get_mcmember_rec);
int ib_init_ah_from_mcmember(struct ib_device *device, u8 port_num,
struct ib_sa_mcmember_rec *rec,
IB/cma: Join and leave multicast groups with IGMP Since RoCEv2 is a protocol over IP header it is required to send IGMP join and leave requests to the network when joining and leaving multicast groups. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23 20:56:57 +08:00
struct net_device *ndev,
enum ib_gid_type gid_type,
IB/core: Rename struct ib_ah_attr to rdma_ah_attr This patch simply renames struct ib_ah_attr to rdma_ah_attr as these fields specify attributes that are not necessarily specific to IB. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-30 02:41:18 +08:00
struct rdma_ah_attr *ah_attr)
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
{
int ret;
u16 gid_index;
IB/cma: Join and leave multicast groups with IGMP Since RoCEv2 is a protocol over IP header it is required to send IGMP join and leave requests to the network when joining and leaving multicast groups. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23 20:56:57 +08:00
IB/core: Honor port_num while resolving GID for IB link layer ah_attr contains the port number to which cm_id is bound. However, while searching for GID table for matching GID entry, the port number is ignored. This could cause the wrong GID to be used when the ah_attr is converted to an AH. Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-13 22:06:14 +08:00
/* GID table is not based on the netdevice for IB link layer,
* so ignore ndev during search.
*/
if (rdma_protocol_ib(device, port_num))
ndev = NULL;
else if (!rdma_protocol_roce(device, port_num))
return -EINVAL;
ret = ib_find_cached_gid_by_port(device, &rec->port_gid,
gid_type, port_num,
ndev,
&gid_index);
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
if (ret)
return ret;
memset(ah_attr, 0, sizeof *ah_attr);
IB/core: Define 'ib' and 'roce' rdma_ah_attr types rdma_ah_attr can now be either ib or roce allowing core components to use one type or the other and also to define attributes unique to a specific type. struct ib_ah is also initialized with the type when its first created. This ensures that calls such as modify_ah dont modify the type of the address handle attribute. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-30 02:41:29 +08:00
ah_attr->type = rdma_ah_find_type(device, port_num);
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
IB/core: Use rdma_ah_attr accessor functions Modify core and driver components to use accessor functions introduced to access individual fields of rdma_ah_attr Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-30 02:41:28 +08:00
rdma_ah_set_dlid(ah_attr, be16_to_cpu(rec->mlid));
rdma_ah_set_sl(ah_attr, rec->sl);
rdma_ah_set_port_num(ah_attr, port_num);
rdma_ah_set_static_rate(ah_attr, rec->rate);
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
IB/core: Use rdma_ah_attr accessor functions Modify core and driver components to use accessor functions introduced to access individual fields of rdma_ah_attr Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-30 02:41:28 +08:00
rdma_ah_set_grh(ah_attr, &rec->mgid,
be32_to_cpu(rec->flow_label),
(u8)gid_index,
rec->hop_limit,
rec->traffic_class);
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
return 0;
}
EXPORT_SYMBOL(ib_init_ah_from_mcmember);
IB/multicast: Report errors on multicast groups if P_key changes P_key changes can invalidate multicast groups. Report errors on all multicast groups affected by a pkey change. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-23 12:52:54 +08:00
static void mcast_groups_event(struct mcast_port *port,
enum mcast_group_state state)
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
{
struct mcast_group *group;
struct rb_node *node;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
for (node = rb_first(&port->table); node; node = rb_next(node)) {
group = rb_entry(node, struct mcast_group, node);
spin_lock(&group->lock);
if (group->state == MCAST_IDLE) {
atomic_inc(&group->refcount);
queue_work(mcast_wq, &group->work);
}
IB/multicast: Report errors on multicast groups if P_key changes P_key changes can invalidate multicast groups. Report errors on all multicast groups affected by a pkey change. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-23 12:52:54 +08:00
if (group->state != MCAST_GROUP_ERROR)
group->state = state;
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
spin_unlock(&group->lock);
}
spin_unlock_irqrestore(&port->lock, flags);
}
static void mcast_event_handler(struct ib_event_handler *handler,
struct ib_event *event)
{
struct mcast_device *dev;
IB/multicast: Report errors on multicast groups if P_key changes P_key changes can invalidate multicast groups. Report errors on all multicast groups affected by a pkey change. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-23 12:52:54 +08:00
int index;
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
dev = container_of(handler, struct mcast_device, event_handler);
IB/core: Don't warn on no SA support in event handler Registering an event handler is done for a device. This device may have one RoCE port (no SA cap) and one InfiniBand port (has SA cap). Therefore, warning from the event handler about a specific port that doesn't have SA cap is correct but pollutes the kernel log without a need. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-10 17:13:32 +08:00
if (!rdma_cap_ib_mcast(dev->device, event->element.port_num))
IB/mad: IBoE supports only QP1 (no QP0) Since IBoE is using Ethernet as its link layer, there is no central management entity so there is need for QP0. QP1 is still needed since it handles communications between CM agents. This patch will skip QP0 and create only QP1 for IBoE ports. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-28 08:51:11 +08:00
return;
IB/multicast: Report errors on multicast groups if P_key changes P_key changes can invalidate multicast groups. Report errors on all multicast groups affected by a pkey change. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-23 12:52:54 +08:00
index = event->element.port_num - dev->start_port;
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
switch (event->event) {
case IB_EVENT_PORT_ERR:
case IB_EVENT_LID_CHANGE:
case IB_EVENT_SM_CHANGE:
case IB_EVENT_CLIENT_REREGISTER:
IB/multicast: Report errors on multicast groups if P_key changes P_key changes can invalidate multicast groups. Report errors on all multicast groups affected by a pkey change. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-23 12:52:54 +08:00
mcast_groups_event(&dev->port[index], MCAST_GROUP_ERROR);
break;
case IB_EVENT_PKEY_CHANGE:
mcast_groups_event(&dev->port[index], MCAST_PKEY_EVENT);
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
break;
default:
break;
}
}
static void mcast_add_one(struct ib_device *device)
{
struct mcast_device *dev;
struct mcast_port *port;
int i;
IB/mad: IBoE supports only QP1 (no QP0) Since IBoE is using Ethernet as its link layer, there is no central management entity so there is need for QP0. QP1 is still needed since it handles communications between CM agents. This patch will skip QP0 and create only QP1 for IBoE ports. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-28 08:51:11 +08:00
int count = 0;
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
treewide: Use struct_size() for kmalloc()-family One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This patch makes the changes for kmalloc()-family (and kvmalloc()-family) uses. It was done via automatic conversion with manual review for the "CHECKME" non-standard cases noted below, using the following Coccinelle script: // pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len * // sizeof *pkey_cache->table, GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-09 04:45:50 +08:00
dev = kmalloc(struct_size(dev, port, device->phys_port_cnt),
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
GFP_KERNEL);
if (!dev)
return;
IB: Add rdma_cap_ib_switch helper and use where appropriate Persuant to Liran's comments on node_type on linux-rdma mailing list: In an effort to reform the RDMA core and ULPs to minimize use of node_type in struct ib_device, an additional bit is added to struct ib_device for is_switch (IB switch). This is needed to be initialized by any IB switch device driver. This is a NEW requirement on such device drivers which are all "out of tree". In addition, an ib_switch helper was added to ib_verbs.h based on the is_switch device bit rather than node_type (although those should be consistent). The RDMA core (MAD, SMI, agent, sa_query, multicast, sysfs) as well as (IPoIB and SRP) ULPs are updated where appropriate to use this new helper. In some cases, the helper is now used under the covers of using rdma_[start end]_port rather than the open coding previously used. Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-29 21:57:00 +08:00
dev->start_port = rdma_start_port(device);
dev->end_port = rdma_end_port(device);
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
for (i = 0; i <= dev->end_port - dev->start_port; i++) {
IB/Verbs: Use management helper rdma_cap_ib_mcast() Introduce helper rdma_cap_ib_mcast() to help us check if the port of an IB device support Infiniband Multicast. Signed-off-by: Michael Wang <yun.wang@profitbricks.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05 20:50:37 +08:00
if (!rdma_cap_ib_mcast(device, dev->start_port + i))
IB/mad: IBoE supports only QP1 (no QP0) Since IBoE is using Ethernet as its link layer, there is no central management entity so there is need for QP0. QP1 is still needed since it handles communications between CM agents. This patch will skip QP0 and create only QP1 for IBoE ports. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-28 08:51:11 +08:00
continue;
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
port = &dev->port[i];
port->dev = dev;
port->port_num = dev->start_port + i;
spin_lock_init(&port->lock);
port->table = RB_ROOT;
init_completion(&port->comp);
atomic_set(&port->refcount, 1);
IB/mad: IBoE supports only QP1 (no QP0) Since IBoE is using Ethernet as its link layer, there is no central management entity so there is need for QP0. QP1 is still needed since it handles communications between CM agents. This patch will skip QP0 and create only QP1 for IBoE ports. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-28 08:51:11 +08:00
++count;
}
if (!count) {
kfree(dev);
return;
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
}
dev->device = device;
ib_set_client_data(device, &mcast_client, dev);
INIT_IB_EVENT_HANDLER(&dev->event_handler, device, mcast_event_handler);
ib_register_event_handler(&dev->event_handler);
}
IB/core: lock client data with lists_rwsem An ib_client callback that is called with the lists_rwsem locked only for read is protected from changes to the IB client lists, but not from ib_unregister_device() freeing its client data. This is because ib_unregister_device() will remove the device from the device list with lists_rwsem locked for write, but perform the rest of the cleanup, including the call to remove() without that lock. Mark client data that is undergoing de-registration with a new going_down flag in the client data context. Lock the client data list with lists_rwsem for write in addition to using the spinlock, so that functions calling the callback would be able to lock only lists_rwsem for read and let callbacks sleep. Since ib_unregister_client() now marks the client data context, no need for remove() to search the context again, so pass the client data directly to remove() callbacks. Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 22:50:14 +08:00
static void mcast_remove_one(struct ib_device *device, void *client_data)
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
{
IB/core: lock client data with lists_rwsem An ib_client callback that is called with the lists_rwsem locked only for read is protected from changes to the IB client lists, but not from ib_unregister_device() freeing its client data. This is because ib_unregister_device() will remove the device from the device list with lists_rwsem locked for write, but perform the rest of the cleanup, including the call to remove() without that lock. Mark client data that is undergoing de-registration with a new going_down flag in the client data context. Lock the client data list with lists_rwsem for write in addition to using the spinlock, so that functions calling the callback would be able to lock only lists_rwsem for read and let callbacks sleep. Since ib_unregister_client() now marks the client data context, no need for remove() to search the context again, so pass the client data directly to remove() callbacks. Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 22:50:14 +08:00
struct mcast_device *dev = client_data;
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
struct mcast_port *port;
int i;
if (!dev)
return;
ib_unregister_event_handler(&dev->event_handler);
flush_workqueue(mcast_wq);
for (i = 0; i <= dev->end_port - dev->start_port; i++) {
IB/Verbs: Use management helper rdma_cap_ib_mcast() Introduce helper rdma_cap_ib_mcast() to help us check if the port of an IB device support Infiniband Multicast. Signed-off-by: Michael Wang <yun.wang@profitbricks.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05 20:50:37 +08:00
if (rdma_cap_ib_mcast(device, dev->start_port + i)) {
IB/mad: IBoE supports only QP1 (no QP0) Since IBoE is using Ethernet as its link layer, there is no central management entity so there is need for QP0. QP1 is still needed since it handles communications between CM agents. This patch will skip QP0 and create only QP1 for IBoE ports. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-28 08:51:11 +08:00
port = &dev->port[i];
deref_port(port);
wait_for_completion(&port->comp);
}
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
}
kfree(dev);
}
int mcast_init(void)
{
int ret;
IB/multicast: Remove deprecated create_singlethread_workqueue alloc_ordered_workqueue() with WQ_MEM_RECLAIM set, replaces deprecated create_singlethread_workqueue(). This is the identity conversion. The workqueue "mcast_wq" queues work item &group->work. It has been identity converted. WQ_MEM_RECLAIM has been set to ensure forward progress under memory pressure. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-16 01:58:36 +08:00
mcast_wq = alloc_ordered_workqueue("ib_mcast", WQ_MEM_RECLAIM);
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
if (!mcast_wq)
return -ENOMEM;
ib_sa_register_client(&sa_client);
ret = ib_register_client(&mcast_client);
if (ret)
goto err;
return 0;
err:
ib_sa_unregister_client(&sa_client);
destroy_workqueue(mcast_wq);
return ret;
}
void mcast_cleanup(void)
{
ib_unregister_client(&mcast_client);
ib_sa_unregister_client(&sa_client);
destroy_workqueue(mcast_wq);
}