OpenCloudOS-Kernel/sound/soc/sof/core.c

400 lines
11 KiB
C
Raw Normal View History

// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
//
// This file is provided under a dual BSD/GPLv2 license. When using or
// redistributing this file, you may do so under either license.
//
// Copyright(c) 2018 Intel Corporation. All rights reserved.
//
// Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
//
#include <linux/firmware.h>
#include <linux/module.h>
#include <sound/soc.h>
#include <sound/sof.h>
#include "sof-priv.h"
#include "ops.h"
#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_PROBES)
#include "probe.h"
#endif
/* see SOF_DBG_ flags */
int sof_core_debug;
module_param_named(sof_debug, sof_core_debug, int, 0444);
MODULE_PARM_DESC(sof_debug, "SOF core debug options (0x0 all off)");
/* SOF defaults if not provided by the platform in ms */
#define TIMEOUT_DEFAULT_IPC_MS 500
#define TIMEOUT_DEFAULT_BOOT_MS 2000
/*
* FW Panic/fault handling.
*/
struct sof_panic_msg {
u32 id;
const char *msg;
};
/* standard FW panic types */
static const struct sof_panic_msg panic_msg[] = {
{SOF_IPC_PANIC_MEM, "out of memory"},
{SOF_IPC_PANIC_WORK, "work subsystem init failed"},
{SOF_IPC_PANIC_IPC, "IPC subsystem init failed"},
{SOF_IPC_PANIC_ARCH, "arch init failed"},
{SOF_IPC_PANIC_PLATFORM, "platform init failed"},
{SOF_IPC_PANIC_TASK, "scheduler init failed"},
{SOF_IPC_PANIC_EXCEPTION, "runtime exception"},
{SOF_IPC_PANIC_DEADLOCK, "deadlock"},
{SOF_IPC_PANIC_STACK, "stack overflow"},
{SOF_IPC_PANIC_IDLE, "can't enter idle"},
{SOF_IPC_PANIC_WFI, "invalid wait state"},
{SOF_IPC_PANIC_ASSERT, "assertion failed"},
};
/*
* helper to be called from .dbg_dump callbacks. No error code is
* provided, it's left as an exercise for the caller of .dbg_dump
* (typically IPC or loader)
*/
void snd_sof_get_status(struct snd_sof_dev *sdev, u32 panic_code,
u32 tracep_code, void *oops,
struct sof_ipc_panic_info *panic_info,
void *stack, size_t stack_words)
{
u32 code;
int i;
/* is firmware dead ? */
if ((panic_code & SOF_IPC_PANIC_MAGIC_MASK) != SOF_IPC_PANIC_MAGIC) {
dev_err(sdev->dev, "error: unexpected fault 0x%8.8x trace 0x%8.8x\n",
panic_code, tracep_code);
return; /* no fault ? */
}
code = panic_code & (SOF_IPC_PANIC_MAGIC_MASK | SOF_IPC_PANIC_CODE_MASK);
for (i = 0; i < ARRAY_SIZE(panic_msg); i++) {
if (panic_msg[i].id == code) {
dev_err(sdev->dev, "error: %s\n", panic_msg[i].msg);
dev_err(sdev->dev, "error: trace point %8.8x\n",
tracep_code);
goto out;
}
}
/* unknown error */
dev_err(sdev->dev, "error: unknown reason %8.8x\n", panic_code);
dev_err(sdev->dev, "error: trace point %8.8x\n", tracep_code);
out:
dev_err(sdev->dev, "error: panic at %s:%d\n",
panic_info->filename, panic_info->linenum);
sof_oops(sdev, oops);
sof_stack(sdev, oops, stack, stack_words);
}
EXPORT_SYMBOL(snd_sof_get_status);
/*
* FW Boot State Transition Diagram
*
* +-----------------------------------------------------------------------+
* | |
* ------------------ ------------------ |
* | | | | |
* | BOOT_FAILED | | READY_FAILED |-------------------------+ |
* | | | | | |
* ------------------ ------------------ | |
* ^ ^ | |
* | | | |
* (FW Boot Timeout) (FW_READY FAIL) | |
* | | | |
* | | | |
* ------------------ | ------------------ | |
* | | | | | | |
* | IN_PROGRESS |---------------+------------->| COMPLETE | | |
* | | (FW Boot OK) (FW_READY OK) | | | |
* ------------------ ------------------ | |
* ^ | | |
* | | | |
* (FW Loading OK) (System Suspend/Runtime Suspend)
* | | | |
* | | | |
* ------------------ ------------------ | | |
* | | | |<-----+ | |
* | PREPARE | | NOT_STARTED |<---------------------+ |
* | | | |<---------------------------+
* ------------------ ------------------
* | ^ | ^
* | | | |
* | +-----------------------+ |
* | (DSP Probe OK) |
* | |
* | |
* +------------------------------------+
* (System Suspend/Runtime Suspend)
*/
static int sof_probe_continue(struct snd_sof_dev *sdev)
{
struct snd_sof_pdata *plat_data = sdev->pdata;
int ret;
/* probe the DSP hardware */
ret = snd_sof_probe(sdev);
if (ret < 0) {
dev_err(sdev->dev, "error: failed to probe DSP %d\n", ret);
return ret;
}
sdev->fw_state = SOF_FW_BOOT_PREPARE;
/* check machine info */
ret = sof_machine_check(sdev);
if (ret < 0) {
dev_err(sdev->dev, "error: failed to get machine info %d\n",
ret);
goto dbg_err;
}
/* set up platform component driver */
snd_sof_new_platform_drv(sdev);
/* register any debug/trace capabilities */
ret = snd_sof_dbg_init(sdev);
if (ret < 0) {
/*
* debugfs issues are suppressed in snd_sof_dbg_init() since
* we cannot rely on debugfs
* here we trap errors due to memory allocation only.
*/
dev_err(sdev->dev, "error: failed to init DSP trace/debug %d\n",
ret);
goto dbg_err;
}
/* init the IPC */
sdev->ipc = snd_sof_ipc_init(sdev);
if (!sdev->ipc) {
ret = -ENOMEM;
dev_err(sdev->dev, "error: failed to init DSP IPC %d\n", ret);
goto ipc_err;
}
/* load the firmware */
ret = snd_sof_load_firmware(sdev);
if (ret < 0) {
dev_err(sdev->dev, "error: failed to load DSP firmware %d\n",
ret);
goto fw_load_err;
}
sdev->fw_state = SOF_FW_BOOT_IN_PROGRESS;
/*
* Boot the firmware. The FW boot status will be modified
* in snd_sof_run_firmware() depending on the outcome.
*/
ret = snd_sof_run_firmware(sdev);
if (ret < 0) {
dev_err(sdev->dev, "error: failed to boot DSP firmware %d\n",
ret);
goto fw_run_err;
}
if (IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_FIRMWARE_TRACE) ||
(sof_core_debug & SOF_DBG_ENABLE_TRACE)) {
sdev->dtrace_is_supported = true;
/* init DMA trace */
ret = snd_sof_init_trace(sdev);
if (ret < 0) {
/* non fatal */
dev_warn(sdev->dev,
"warning: failed to initialize trace %d\n",
ret);
}
} else {
dev_dbg(sdev->dev, "SOF firmware trace disabled\n");
}
/* hereafter all FW boot flows are for PM reasons */
sdev->first_boot = false;
/* now register audio DSP platform driver and dai */
ret = devm_snd_soc_register_component(sdev->dev, &sdev->plat_drv,
sof_ops(sdev)->drv,
sof_ops(sdev)->num_drv);
if (ret < 0) {
dev_err(sdev->dev,
"error: failed to register DSP DAI driver %d\n", ret);
goto fw_trace_err;
}
ret = snd_sof_machine_register(sdev, plat_data);
if (ret < 0)
goto fw_trace_err;
/*
* Some platforms in SOF, ex: BYT, may not have their platform PM
* callbacks set. Increment the usage count so as to
* prevent the device from entering runtime suspend.
*/
if (!sof_ops(sdev)->runtime_suspend || !sof_ops(sdev)->runtime_resume)
pm_runtime_get_noresume(sdev->dev);
if (plat_data->sof_probe_complete)
plat_data->sof_probe_complete(sdev->dev);
return 0;
fw_trace_err:
snd_sof_free_trace(sdev);
fw_run_err:
snd_sof_fw_unload(sdev);
fw_load_err:
snd_sof_ipc_free(sdev);
ipc_err:
snd_sof_free_debug(sdev);
dbg_err:
snd_sof_remove(sdev);
/* all resources freed, update state to match */
sdev->fw_state = SOF_FW_BOOT_NOT_STARTED;
sdev->first_boot = true;
return ret;
}
static void sof_probe_work(struct work_struct *work)
{
struct snd_sof_dev *sdev =
container_of(work, struct snd_sof_dev, probe_work);
int ret;
ret = sof_probe_continue(sdev);
if (ret < 0) {
/* errors cannot be propagated, log */
dev_err(sdev->dev, "error: %s failed err: %d\n", __func__, ret);
}
}
int snd_sof_device_probe(struct device *dev, struct snd_sof_pdata *plat_data)
{
struct snd_sof_dev *sdev;
sdev = devm_kzalloc(dev, sizeof(*sdev), GFP_KERNEL);
if (!sdev)
return -ENOMEM;
/* initialize sof device */
sdev->dev = dev;
ASoC: SOF: Move DSP power state transitions to platform-specific ops The DSP device substates such as D0I0/D0I3 are platform-specific. Therefore, the d0_substate field of struct snd_sof_dev is replaced with the dsp_power_state field which represents the current state of the DSP. This field holds both the device state and the platform-specific substate values. With the DSP device substates being platform-specific, the DSP power state transitions need to be performed in the platform-specific suspend/resume ops as well. In order to achieve this, the ops signature has to be modified to pass the target device state as an argument. The target substate will be determined by the platform-specific ops before performing the transition. For example, in the case of the system suspending to S0IX, the top-level SOF device suspend callback needs to only determine if the DSP will be entering D3 or remain in D0. The target substate in case the device needs to remain in D0 (D0I0 or D0I3) will be determined by the platform-specific suspend op. With the addition of the extended set of power states for the DSP, the set_power_state op for HDA platforms has to be extended to handle only the appropriate state transitions. So, the implementation for the Intel HDA platforms is also modified. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200129220726.31792-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-30 06:07:22 +08:00
/* initialize default DSP power state */
sdev->dsp_power_state.state = SOF_DSP_PM_D0;
sdev->pdata = plat_data;
sdev->first_boot = true;
sdev->fw_state = SOF_FW_BOOT_NOT_STARTED;
#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_PROBES)
sdev->extractor_stream_tag = SOF_PROBE_INVALID_NODE_ID;
#endif
dev_set_drvdata(dev, sdev);
/* check all mandatory ops */
if (!sof_ops(sdev) || !sof_ops(sdev)->probe || !sof_ops(sdev)->run ||
!sof_ops(sdev)->block_read || !sof_ops(sdev)->block_write ||
!sof_ops(sdev)->send_msg || !sof_ops(sdev)->load_firmware ||
!sof_ops(sdev)->ipc_msg_data || !sof_ops(sdev)->ipc_pcm_params ||
!sof_ops(sdev)->fw_ready)
return -EINVAL;
INIT_LIST_HEAD(&sdev->pcm_list);
INIT_LIST_HEAD(&sdev->kcontrol_list);
INIT_LIST_HEAD(&sdev->widget_list);
INIT_LIST_HEAD(&sdev->dai_list);
INIT_LIST_HEAD(&sdev->route_list);
spin_lock_init(&sdev->ipc_lock);
spin_lock_init(&sdev->hw_lock);
mutex_init(&sdev->power_state_access);
if (IS_ENABLED(CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE))
INIT_WORK(&sdev->probe_work, sof_probe_work);
/* set default timeouts if none provided */
if (plat_data->desc->ipc_timeout == 0)
sdev->ipc_timeout = TIMEOUT_DEFAULT_IPC_MS;
else
sdev->ipc_timeout = plat_data->desc->ipc_timeout;
if (plat_data->desc->boot_timeout == 0)
sdev->boot_timeout = TIMEOUT_DEFAULT_BOOT_MS;
else
sdev->boot_timeout = plat_data->desc->boot_timeout;
if (IS_ENABLED(CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE)) {
schedule_work(&sdev->probe_work);
return 0;
}
return sof_probe_continue(sdev);
}
EXPORT_SYMBOL(snd_sof_device_probe);
int snd_sof_device_remove(struct device *dev)
{
struct snd_sof_dev *sdev = dev_get_drvdata(dev);
struct snd_sof_pdata *pdata = sdev->pdata;
int ret;
if (IS_ENABLED(CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE))
cancel_work_sync(&sdev->probe_work);
if (sdev->fw_state > SOF_FW_BOOT_NOT_STARTED) {
ret = snd_sof_dsp_power_down_notify(sdev);
if (ret < 0)
dev_warn(dev, "error: %d failed to prepare DSP for device removal",
ret);
snd_sof_fw_unload(sdev);
snd_sof_ipc_free(sdev);
snd_sof_free_debug(sdev);
snd_sof_free_trace(sdev);
}
/*
* Unregister machine driver. This will unbind the snd_card which
* will remove the component driver and unload the topology
* before freeing the snd_card.
*/
snd_sof_machine_unregister(sdev, pdata);
/*
* Unregistering the machine driver results in unloading the topology.
* Some widgets, ex: scheduler, attempt to power down the core they are
* scheduled on, when they are unloaded. Therefore, the DSP must be
* removed only after the topology has been unloaded.
*/
if (sdev->fw_state > SOF_FW_BOOT_NOT_STARTED)
snd_sof_remove(sdev);
/* release firmware */
release_firmware(pdata->fw);
pdata->fw = NULL;
return 0;
}
EXPORT_SYMBOL(snd_sof_device_remove);
int snd_sof_device_shutdown(struct device *dev)
{
struct snd_sof_dev *sdev = dev_get_drvdata(dev);
return snd_sof_shutdown(sdev);
}
EXPORT_SYMBOL(snd_sof_device_shutdown);
MODULE_AUTHOR("Liam Girdwood");
MODULE_DESCRIPTION("Sound Open Firmware (SOF) Core");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_ALIAS("platform:sof-audio");