OpenCloudOS-Kernel/net/mac80211/status.c

1000 lines
28 KiB
C
Raw Normal View History

/*
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
* Copyright 2008-2010 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2013-2014 Intel Mobile Communications GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/export.h>
#include <linux/etherdevice.h>
#include <linux/time.h>
#include <net/mac80211.h>
#include <asm/unaligned.h>
#include "ieee80211_i.h"
#include "rate.h"
#include "mesh.h"
#include "led.h"
#include "wme.h"
void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
struct sk_buff *skb)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
int tmp;
skb->pkt_type = IEEE80211_TX_STATUS_MSG;
skb_queue_tail(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS ?
&local->skb_queue : &local->skb_queue_unreliable, skb);
tmp = skb_queue_len(&local->skb_queue) +
skb_queue_len(&local->skb_queue_unreliable);
while (tmp > IEEE80211_IRQSAFE_QUEUE_LIMIT &&
(skb = skb_dequeue(&local->skb_queue_unreliable))) {
ieee80211_free_txskb(hw, skb);
tmp--;
I802_DEBUG_INC(local->tx_status_drop);
}
tasklet_schedule(&local->tasklet);
}
EXPORT_SYMBOL(ieee80211_tx_status_irqsafe);
static void ieee80211_handle_filtered_frame(struct ieee80211_local *local,
struct sta_info *sta,
struct sk_buff *skb)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (void *)skb->data;
int ac;
/*
* This skb 'survived' a round-trip through the driver, and
* hopefully the driver didn't mangle it too badly. However,
* we can definitely not rely on the control information
* being correct. Clear it so we don't get junk there, and
* indicate that it needs new processing, but must not be
* modified/encrypted again.
*/
memset(&info->control, 0, sizeof(info->control));
info->control.jiffies = jiffies;
info->control.vif = &sta->sdata->vif;
info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING |
IEEE80211_TX_INTFL_RETRANSMISSION;
info->flags &= ~IEEE80211_TX_TEMPORARY_FLAGS;
sta->tx_filtered_count++;
/*
* Clear more-data bit on filtered frames, it might be set
* but later frames might time out so it might have to be
* clear again ... It's all rather unlikely (this frame
* should time out first, right?) but let's not confuse
* peers unnecessarily.
*/
if (hdr->frame_control & cpu_to_le16(IEEE80211_FCTL_MOREDATA))
hdr->frame_control &= ~cpu_to_le16(IEEE80211_FCTL_MOREDATA);
if (ieee80211_is_data_qos(hdr->frame_control)) {
u8 *p = ieee80211_get_qos_ctl(hdr);
int tid = *p & IEEE80211_QOS_CTL_TID_MASK;
/*
* Clear EOSP if set, this could happen e.g.
* if an absence period (us being a P2P GO)
* shortens the SP.
*/
if (*p & IEEE80211_QOS_CTL_EOSP)
*p &= ~IEEE80211_QOS_CTL_EOSP;
ac = ieee802_1d_to_ac[tid & 7];
} else {
ac = IEEE80211_AC_BE;
}
/*
* Clear the TX filter mask for this STA when sending the next
* packet. If the STA went to power save mode, this will happen
* when it wakes up for the next time.
*/
set_sta_flag(sta, WLAN_STA_CLEAR_PS_FILT);
/*
* This code races in the following way:
*
* (1) STA sends frame indicating it will go to sleep and does so
* (2) hardware/firmware adds STA to filter list, passes frame up
* (3) hardware/firmware processes TX fifo and suppresses a frame
* (4) we get TX status before having processed the frame and
* knowing that the STA has gone to sleep.
*
* This is actually quite unlikely even when both those events are
* processed from interrupts coming in quickly after one another or
* even at the same time because we queue both TX status events and
* RX frames to be processed by a tasklet and process them in the
* same order that they were received or TX status last. Hence, there
* is no race as long as the frame RX is processed before the next TX
* status, which drivers can ensure, see below.
*
* Note that this can only happen if the hardware or firmware can
* actually add STAs to the filter list, if this is done by the
* driver in response to set_tim() (which will only reduce the race
* this whole filtering tries to solve, not completely solve it)
* this situation cannot happen.
*
* To completely solve this race drivers need to make sure that they
* (a) don't mix the irq-safe/not irq-safe TX status/RX processing
* functions and
* (b) always process RX events before TX status events if ordering
* can be unknown, for example with different interrupt status
* bits.
* (c) if PS mode transitions are manual (i.e. the flag
* %IEEE80211_HW_AP_LINK_PS is set), always process PS state
* changes before calling TX status events if ordering can be
* unknown.
*/
if (test_sta_flag(sta, WLAN_STA_PS_STA) &&
skb_queue_len(&sta->tx_filtered[ac]) < STA_MAX_TX_BUFFER) {
skb_queue_tail(&sta->tx_filtered[ac], skb);
sta_info_recalc_tim(sta);
if (!timer_pending(&local->sta_cleanup))
mod_timer(&local->sta_cleanup,
round_jiffies(jiffies +
STA_INFO_CLEANUP_INTERVAL));
return;
}
if (!test_sta_flag(sta, WLAN_STA_PS_STA) &&
!(info->flags & IEEE80211_TX_INTFL_RETRIED)) {
/* Software retry the packet once */
info->flags |= IEEE80211_TX_INTFL_RETRIED;
ieee80211_add_pending_skb(local, skb);
return;
}
ps_dbg_ratelimited(sta->sdata,
"dropped TX filtered frame, queue_len=%d PS=%d @%lu\n",
skb_queue_len(&sta->tx_filtered[ac]),
!!test_sta_flag(sta, WLAN_STA_PS_STA), jiffies);
ieee80211_free_txskb(&local->hw, skb);
}
static void ieee80211_check_pending_bar(struct sta_info *sta, u8 *addr, u8 tid)
{
struct tid_ampdu_tx *tid_tx;
tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]);
if (!tid_tx || !tid_tx->bar_pending)
return;
tid_tx->bar_pending = false;
ieee80211_send_bar(&sta->sdata->vif, addr, tid, tid_tx->failed_bar_ssn);
}
static void ieee80211_frame_acked(struct sta_info *sta, struct sk_buff *skb)
{
struct ieee80211_mgmt *mgmt = (void *) skb->data;
struct ieee80211_local *local = sta->local;
struct ieee80211_sub_if_data *sdata = sta->sdata;
if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
sta->last_rx = jiffies;
if (ieee80211_is_data_qos(mgmt->frame_control)) {
struct ieee80211_hdr *hdr = (void *) skb->data;
u8 *qc = ieee80211_get_qos_ctl(hdr);
u16 tid = qc[0] & 0xf;
ieee80211_check_pending_bar(sta, hdr->addr1, tid);
}
if (ieee80211_is_action(mgmt->frame_control) &&
mgmt->u.action.category == WLAN_CATEGORY_HT &&
mgmt->u.action.u.ht_smps.action == WLAN_HT_ACTION_SMPS &&
ieee80211_sdata_running(sdata)) {
enum ieee80211_smps_mode smps_mode;
switch (mgmt->u.action.u.ht_smps.smps_control) {
case WLAN_HT_SMPS_CONTROL_DYNAMIC:
smps_mode = IEEE80211_SMPS_DYNAMIC;
break;
case WLAN_HT_SMPS_CONTROL_STATIC:
smps_mode = IEEE80211_SMPS_STATIC;
break;
case WLAN_HT_SMPS_CONTROL_DISABLED:
default: /* shouldn't happen since we don't send that */
smps_mode = IEEE80211_SMPS_OFF;
break;
}
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
/*
* This update looks racy, but isn't -- if we come
* here we've definitely got a station that we're
* talking to, and on a managed interface that can
* only be the AP. And the only other place updating
* this variable in managed mode is before association.
*/
sdata->smps_mode = smps_mode;
ieee80211_queue_work(&local->hw, &sdata->recalc_smps);
} else if (sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
sta->known_smps_mode = smps_mode;
}
}
}
static void ieee80211_set_bar_pending(struct sta_info *sta, u8 tid, u16 ssn)
{
struct tid_ampdu_tx *tid_tx;
tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]);
if (!tid_tx)
return;
tid_tx->failed_bar_ssn = ssn;
tid_tx->bar_pending = true;
}
static int ieee80211_tx_radiotap_len(struct ieee80211_tx_info *info)
{
int len = sizeof(struct ieee80211_radiotap_header);
/* IEEE80211_RADIOTAP_RATE rate */
if (info->status.rates[0].idx >= 0 &&
!(info->status.rates[0].flags & (IEEE80211_TX_RC_MCS |
IEEE80211_TX_RC_VHT_MCS)))
len += 2;
/* IEEE80211_RADIOTAP_TX_FLAGS */
len += 2;
/* IEEE80211_RADIOTAP_DATA_RETRIES */
len += 1;
/* IEEE80211_RADIOTAP_MCS
* IEEE80211_RADIOTAP_VHT */
if (info->status.rates[0].idx >= 0) {
if (info->status.rates[0].flags & IEEE80211_TX_RC_MCS)
len += 3;
else if (info->status.rates[0].flags & IEEE80211_TX_RC_VHT_MCS)
len = ALIGN(len, 2) + 12;
}
return len;
}
static void
ieee80211_add_tx_radiotap_header(struct ieee80211_local *local,
struct ieee80211_supported_band *sband,
struct sk_buff *skb, int retry_count,
int rtap_len, int shift)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct ieee80211_radiotap_header *rthdr;
unsigned char *pos;
u16 txflags;
rthdr = (struct ieee80211_radiotap_header *) skb_push(skb, rtap_len);
memset(rthdr, 0, rtap_len);
rthdr->it_len = cpu_to_le16(rtap_len);
rthdr->it_present =
cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) |
(1 << IEEE80211_RADIOTAP_DATA_RETRIES));
pos = (unsigned char *)(rthdr + 1);
/*
* XXX: Once radiotap gets the bitmap reset thing the vendor
* extensions proposal contains, we can actually report
* the whole set of tries we did.
*/
/* IEEE80211_RADIOTAP_RATE */
if (info->status.rates[0].idx >= 0 &&
!(info->status.rates[0].flags & (IEEE80211_TX_RC_MCS |
IEEE80211_TX_RC_VHT_MCS))) {
u16 rate;
rthdr->it_present |= cpu_to_le32(1 << IEEE80211_RADIOTAP_RATE);
rate = sband->bitrates[info->status.rates[0].idx].bitrate;
*pos = DIV_ROUND_UP(rate, 5 * (1 << shift));
/* padding for tx flags */
pos += 2;
}
/* IEEE80211_RADIOTAP_TX_FLAGS */
txflags = 0;
if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
!is_multicast_ether_addr(hdr->addr1))
txflags |= IEEE80211_RADIOTAP_F_TX_FAIL;
if (info->status.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
txflags |= IEEE80211_RADIOTAP_F_TX_CTS;
if (info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
txflags |= IEEE80211_RADIOTAP_F_TX_RTS;
put_unaligned_le16(txflags, pos);
pos += 2;
/* IEEE80211_RADIOTAP_DATA_RETRIES */
/* for now report the total retry_count */
*pos = retry_count;
pos++;
if (info->status.rates[0].idx < 0)
return;
/* IEEE80211_RADIOTAP_MCS
* IEEE80211_RADIOTAP_VHT */
if (info->status.rates[0].flags & IEEE80211_TX_RC_MCS) {
rthdr->it_present |= cpu_to_le32(1 << IEEE80211_RADIOTAP_MCS);
pos[0] = IEEE80211_RADIOTAP_MCS_HAVE_MCS |
IEEE80211_RADIOTAP_MCS_HAVE_GI |
IEEE80211_RADIOTAP_MCS_HAVE_BW;
if (info->status.rates[0].flags & IEEE80211_TX_RC_SHORT_GI)
pos[1] |= IEEE80211_RADIOTAP_MCS_SGI;
if (info->status.rates[0].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
pos[1] |= IEEE80211_RADIOTAP_MCS_BW_40;
if (info->status.rates[0].flags & IEEE80211_TX_RC_GREEN_FIELD)
pos[1] |= IEEE80211_RADIOTAP_MCS_FMT_GF;
pos[2] = info->status.rates[0].idx;
pos += 3;
} else if (info->status.rates[0].flags & IEEE80211_TX_RC_VHT_MCS) {
u16 known = local->hw.radiotap_vht_details &
(IEEE80211_RADIOTAP_VHT_KNOWN_GI |
IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH);
rthdr->it_present |= cpu_to_le32(1 << IEEE80211_RADIOTAP_VHT);
/* required alignment from rthdr */
pos = (u8 *)rthdr + ALIGN(pos - (u8 *)rthdr, 2);
/* u16 known - IEEE80211_RADIOTAP_VHT_KNOWN_* */
put_unaligned_le16(known, pos);
pos += 2;
/* u8 flags - IEEE80211_RADIOTAP_VHT_FLAG_* */
if (info->status.rates[0].flags & IEEE80211_TX_RC_SHORT_GI)
*pos |= IEEE80211_RADIOTAP_VHT_FLAG_SGI;
pos++;
/* u8 bandwidth */
if (info->status.rates[0].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
*pos = 1;
else if (info->status.rates[0].flags & IEEE80211_TX_RC_80_MHZ_WIDTH)
*pos = 4;
else if (info->status.rates[0].flags & IEEE80211_TX_RC_160_MHZ_WIDTH)
*pos = 11;
else /* IEEE80211_TX_RC_{20_MHZ_WIDTH,FIXME:DUP_DATA} */
*pos = 0;
pos++;
/* u8 mcs_nss[4] */
*pos = (ieee80211_rate_get_vht_mcs(&info->status.rates[0]) << 4) |
ieee80211_rate_get_vht_nss(&info->status.rates[0]);
pos += 4;
/* u8 coding */
pos++;
/* u8 group_id */
pos++;
/* u16 partial_aid */
pos += 2;
}
}
/*
* Handles the tx for TDLS teardown frames.
* If the frame wasn't ACKed by the peer - it will be re-sent through the AP
*/
static void ieee80211_tdls_td_tx_handle(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb, u32 flags)
{
struct sk_buff *teardown_skb;
struct sk_buff *orig_teardown_skb;
bool is_teardown = false;
/* Get the teardown data we need and free the lock */
spin_lock(&sdata->u.mgd.teardown_lock);
teardown_skb = sdata->u.mgd.teardown_skb;
orig_teardown_skb = sdata->u.mgd.orig_teardown_skb;
if ((skb == orig_teardown_skb) && teardown_skb) {
sdata->u.mgd.teardown_skb = NULL;
sdata->u.mgd.orig_teardown_skb = NULL;
is_teardown = true;
}
spin_unlock(&sdata->u.mgd.teardown_lock);
if (is_teardown) {
/* This mechanism relies on being able to get ACKs */
WARN_ON(!(local->hw.flags &
IEEE80211_HW_REPORTS_TX_ACK_STATUS));
/* Check if peer has ACKed */
if (flags & IEEE80211_TX_STAT_ACK) {
dev_kfree_skb_any(teardown_skb);
} else {
tdls_dbg(sdata,
"TDLS Resending teardown through AP\n");
ieee80211_subif_start_xmit(teardown_skb, skb->dev);
}
}
}
static void ieee80211_report_used_skb(struct ieee80211_local *local,
struct sk_buff *skb, bool dropped)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (void *)skb->data;
bool acked = info->flags & IEEE80211_TX_STAT_ACK;
if (dropped)
acked = false;
if (info->flags & (IEEE80211_TX_INTFL_NL80211_FRAME_TX |
IEEE80211_TX_INTFL_MLME_CONN_TX)) {
struct ieee80211_sub_if_data *sdata = NULL;
struct ieee80211_sub_if_data *iter_sdata;
u64 cookie = (unsigned long)skb;
rcu_read_lock();
if (skb->dev) {
list_for_each_entry_rcu(iter_sdata, &local->interfaces,
list) {
if (!iter_sdata->dev)
continue;
if (skb->dev == iter_sdata->dev) {
sdata = iter_sdata;
break;
}
}
} else {
sdata = rcu_dereference(local->p2p_sdata);
}
if (!sdata) {
skb->dev = NULL;
} else if (info->flags & IEEE80211_TX_INTFL_MLME_CONN_TX) {
unsigned int hdr_size =
ieee80211_hdrlen(hdr->frame_control);
/* Check to see if packet is a TDLS teardown packet */
if (ieee80211_is_data(hdr->frame_control) &&
(ieee80211_get_tdls_action(skb, hdr_size) ==
WLAN_TDLS_TEARDOWN))
ieee80211_tdls_td_tx_handle(local, sdata, skb,
info->flags);
else
ieee80211_mgd_conn_tx_status(sdata,
hdr->frame_control,
acked);
} else if (ieee80211_is_nullfunc(hdr->frame_control) ||
ieee80211_is_qos_nullfunc(hdr->frame_control)) {
cfg80211_probe_status(sdata->dev, hdr->addr1,
cookie, acked, GFP_ATOMIC);
} else {
cfg80211_mgmt_tx_status(&sdata->wdev, cookie, skb->data,
skb->len, acked, GFP_ATOMIC);
}
rcu_read_unlock();
}
if (unlikely(info->ack_frame_id)) {
struct sk_buff *ack_skb;
unsigned long flags;
spin_lock_irqsave(&local->ack_status_lock, flags);
ack_skb = idr_find(&local->ack_status_frames,
info->ack_frame_id);
if (ack_skb)
idr_remove(&local->ack_status_frames,
info->ack_frame_id);
spin_unlock_irqrestore(&local->ack_status_lock, flags);
if (ack_skb) {
if (!dropped) {
/* consumes ack_skb */
skb_complete_wifi_ack(ack_skb, acked);
} else {
dev_kfree_skb_any(ack_skb);
}
}
}
}
/*
* Measure Tx frame completion and removal time for Tx latency statistics
* calculation. A single Tx frame latency should be measured from when it
* is entering the Kernel until we receive Tx complete confirmation indication
* and remove the skb.
*/
static void ieee80211_tx_latency_end_msrmnt(struct ieee80211_local *local,
struct sk_buff *skb,
struct sta_info *sta,
struct ieee80211_hdr *hdr)
{
u32 msrmnt;
u16 tid;
u8 *qc;
int i, bin_range_count;
u32 *bin_ranges;
__le16 fc;
struct ieee80211_tx_latency_stat *tx_lat;
struct ieee80211_tx_latency_bin_ranges *tx_latency;
ktime_t skb_arv = skb->tstamp;
tx_latency = rcu_dereference(local->tx_latency);
/* assert Tx latency stats are enabled & frame arrived when enabled */
if (!tx_latency || !ktime_to_ns(skb_arv))
return;
fc = hdr->frame_control;
if (!ieee80211_is_data(fc)) /* make sure it is a data frame */
return;
/* get frame tid */
if (ieee80211_is_data_qos(hdr->frame_control)) {
qc = ieee80211_get_qos_ctl(hdr);
tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
} else {
tid = 0;
}
tx_lat = &sta->tx_lat[tid];
/* Calculate the latency */
msrmnt = ktime_to_ms(ktime_sub(ktime_get(), skb_arv));
if (tx_lat->max < msrmnt) /* update stats */
tx_lat->max = msrmnt;
tx_lat->counter++;
tx_lat->sum += msrmnt;
if (!tx_lat->bins) /* bins not activated */
return;
/* count how many Tx frames transmitted with the appropriate latency */
bin_range_count = tx_latency->n_ranges;
bin_ranges = tx_latency->ranges;
for (i = 0; i < bin_range_count; i++) {
if (msrmnt <= bin_ranges[i]) {
tx_lat->bins[i]++;
break;
}
}
if (i == bin_range_count) /* msrmnt is bigger than the biggest range */
tx_lat->bins[i]++;
}
/*
* Use a static threshold for now, best value to be determined
* by testing ...
* Should it depend on:
* - on # of retransmissions
* - current throughput (higher value for higher tpt)?
*/
#define STA_LOST_PKT_THRESHOLD 50
#define STA_LOST_TDLS_PKT_THRESHOLD 10
#define STA_LOST_TDLS_PKT_TIME (10*HZ) /* 10secs since last ACK */
static void ieee80211_lost_packet(struct sta_info *sta,
struct ieee80211_tx_info *info)
{
/* This packet was aggregated but doesn't carry status info */
if ((info->flags & IEEE80211_TX_CTL_AMPDU) &&
!(info->flags & IEEE80211_TX_STAT_AMPDU))
return;
sta->lost_packets++;
if (!sta->sta.tdls && sta->lost_packets < STA_LOST_PKT_THRESHOLD)
return;
/*
* If we're in TDLS mode, make sure that all STA_LOST_TDLS_PKT_THRESHOLD
* of the last packets were lost, and that no ACK was received in the
* last STA_LOST_TDLS_PKT_TIME ms, before triggering the CQM packet-loss
* mechanism.
*/
if (sta->sta.tdls &&
(sta->lost_packets < STA_LOST_TDLS_PKT_THRESHOLD ||
time_before(jiffies,
sta->last_tdls_pkt_time + STA_LOST_TDLS_PKT_TIME)))
return;
cfg80211_cqm_pktloss_notify(sta->sdata->dev, sta->sta.addr,
sta->lost_packets, GFP_ATOMIC);
sta->lost_packets = 0;
}
static int ieee80211_tx_get_rates(struct ieee80211_hw *hw,
struct ieee80211_tx_info *info,
int *retry_count)
{
int rates_idx = -1;
int count = -1;
int i;
for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
if ((info->flags & IEEE80211_TX_CTL_AMPDU) &&
!(info->flags & IEEE80211_TX_STAT_AMPDU)) {
/* just the first aggr frame carry status info */
info->status.rates[i].idx = -1;
info->status.rates[i].count = 0;
break;
} else if (info->status.rates[i].idx < 0) {
break;
} else if (i >= hw->max_report_rates) {
/* the HW cannot have attempted that rate */
info->status.rates[i].idx = -1;
info->status.rates[i].count = 0;
break;
}
count += info->status.rates[i].count;
}
rates_idx = i - 1;
if (count < 0)
count = 0;
*retry_count = count;
return rates_idx;
}
void ieee80211_tx_status_noskb(struct ieee80211_hw *hw,
struct ieee80211_sta *pubsta,
struct ieee80211_tx_info *info)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_supported_band *sband;
int retry_count;
int rates_idx;
bool acked, noack_success;
rates_idx = ieee80211_tx_get_rates(hw, info, &retry_count);
sband = hw->wiphy->bands[info->band];
acked = !!(info->flags & IEEE80211_TX_STAT_ACK);
noack_success = !!(info->flags & IEEE80211_TX_STAT_NOACK_TRANSMITTED);
if (pubsta) {
struct sta_info *sta;
sta = container_of(pubsta, struct sta_info, sta);
if (!acked)
sta->tx_retry_failed++;
sta->tx_retry_count += retry_count;
if (acked) {
sta->last_rx = jiffies;
if (sta->lost_packets)
sta->lost_packets = 0;
/* Track when last TDLS packet was ACKed */
if (test_sta_flag(sta, WLAN_STA_TDLS_PEER_AUTH))
sta->last_tdls_pkt_time = jiffies;
} else {
ieee80211_lost_packet(sta, info);
}
rate_control_tx_status_noskb(local, sband, sta, info);
}
if (acked || noack_success) {
local->dot11TransmittedFrameCount++;
if (!pubsta)
local->dot11MulticastTransmittedFrameCount++;
if (retry_count > 0)
local->dot11RetryCount++;
if (retry_count > 1)
local->dot11MultipleRetryCount++;
} else {
local->dot11FailedCount++;
}
}
EXPORT_SYMBOL(ieee80211_tx_status_noskb);
void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct sk_buff *skb2;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
__le16 fc;
struct ieee80211_supported_band *sband;
struct ieee80211_sub_if_data *sdata;
struct net_device *prev_dev = NULL;
struct sta_info *sta, *tmp;
int retry_count;
int rates_idx;
bool send_to_cooked;
bool acked;
struct ieee80211_bar *bar;
int rtap_len;
int shift = 0;
int tid = IEEE80211_NUM_TIDS;;
rates_idx = ieee80211_tx_get_rates(hw, info, &retry_count);
rcu_read_lock();
sband = local->hw.wiphy->bands[info->band];
fc = hdr->frame_control;
for_each_sta_info(local, hdr->addr1, sta, tmp) {
/* skip wrong virtual interface */
if (!ether_addr_equal(hdr->addr2, sta->sdata->vif.addr))
continue;
shift = ieee80211_vif_get_shift(&sta->sdata->vif);
if (info->flags & IEEE80211_TX_STATUS_EOSP)
clear_sta_flag(sta, WLAN_STA_SP);
acked = !!(info->flags & IEEE80211_TX_STAT_ACK);
if (!acked && test_sta_flag(sta, WLAN_STA_PS_STA)) {
/*
* The STA is in power save mode, so assume
* that this TX packet failed because of that.
*/
ieee80211_handle_filtered_frame(local, sta, skb);
rcu_read_unlock();
return;
}
mac80211: mesh power save basics Add routines to - maintain a PS mode for each peer and a non-peer PS mode - indicate own PS mode in transmitted frames - track neighbor STAs power modes - buffer frames when neighbors are in PS mode - add TIM and Awake Window IE to beacons - release frames in Mesh Peer Service Periods Add local_pm to sta_info to represent the link-specific power mode at this station towards the remote station. When a peer link is established, use the default power mode stored in mesh config. Update the PS status if the peering status of a neighbor changes. Maintain a mesh power mode for non-peer mesh STAs. Set the non-peer power mode to active mode during peering. Authenticated mesh peering is currently not working when either node is configured to be in power save mode. Indicate the current power mode in transmitted frames. Use QoS Nulls to indicate mesh power mode transitions. For performance reasons, calls to the function setting the frame flags are placed in HWMP routing routines, as there the STA pointer is already available. Add peer_pm to sta_info to represent the peer's link-specific power mode towards the local station. Add nonpeer_pm to represent the peer's power mode towards all non-peer stations. Track power modes based on received frames. Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS neighbor counter and group-addressed frame buffer). Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame buffering routines in the tx path. Update num_sta_ps to buffer and release group-addressed frames after DTIM beacons. Announce the awake window duration in beacons if in light or deep sleep mode towards any peer or non-peer. Create a TIM IE similarly to AP mode and add it to mesh beacons. Parse received Awake Window IEs and check TIM IEs for buffered frames. Release frames towards peers in mesh Peer Service Periods. Use the corresponding trigger frames and monitor the MPSP status. Append a QoS Null as trigger frame if neccessary to properly end the MPSP. Currently, in HT channels MPSPs behave imperfectly and show large delay spikes and frame losses. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com> Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-31 01:14:08 +08:00
/* mesh Peer Service Period support */
if (ieee80211_vif_is_mesh(&sta->sdata->vif) &&
ieee80211_is_data_qos(fc))
ieee80211_mpsp_trigger_process(
ieee80211_get_qos_ctl(hdr),
sta, true, acked);
if ((local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) &&
(ieee80211_is_data(hdr->frame_control)) &&
(rates_idx != -1))
sta->last_tx_rate = info->status.rates[rates_idx];
if ((info->flags & IEEE80211_TX_STAT_AMPDU_NO_BACK) &&
(ieee80211_is_data_qos(fc))) {
u16 ssn;
u8 *qc;
qc = ieee80211_get_qos_ctl(hdr);
tid = qc[0] & 0xf;
ssn = ((le16_to_cpu(hdr->seq_ctrl) + 0x10)
& IEEE80211_SCTL_SEQ);
ieee80211_send_bar(&sta->sdata->vif, hdr->addr1,
tid, ssn);
} else if (ieee80211_is_data_qos(fc)) {
u8 *qc = ieee80211_get_qos_ctl(hdr);
tid = qc[0] & 0xf;
}
if (!acked && ieee80211_is_back_req(fc)) {
u16 control;
/*
* BAR failed, store the last SSN and retry sending
* the BAR when the next unicast transmission on the
* same TID succeeds.
*/
bar = (struct ieee80211_bar *) skb->data;
control = le16_to_cpu(bar->control);
if (!(control & IEEE80211_BAR_CTRL_MULTI_TID)) {
u16 ssn = le16_to_cpu(bar->start_seq_num);
tid = (control &
IEEE80211_BAR_CTRL_TID_INFO_MASK) >>
IEEE80211_BAR_CTRL_TID_INFO_SHIFT;
ieee80211_set_bar_pending(sta, tid, ssn);
}
}
if (info->flags & IEEE80211_TX_STAT_TX_FILTERED) {
ieee80211_handle_filtered_frame(local, sta, skb);
rcu_read_unlock();
return;
} else {
if (!acked)
sta->tx_retry_failed++;
sta->tx_retry_count += retry_count;
if (ieee80211_is_data_present(fc)) {
if (!acked)
sta->tx_msdu_failed[tid]++;
sta->tx_msdu_retries[tid] += retry_count;
}
}
rate_control_tx_status(local, sband, sta, skb);
if (ieee80211_vif_is_mesh(&sta->sdata->vif))
ieee80211s_update_metric(local, sta, skb);
if (!(info->flags & IEEE80211_TX_CTL_INJECTED) && acked)
ieee80211_frame_acked(sta, skb);
if ((sta->sdata->vif.type == NL80211_IFTYPE_STATION) &&
(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS))
ieee80211_sta_tx_notify(sta->sdata, (void *) skb->data,
acked, info->status.tx_time);
if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) {
if (info->flags & IEEE80211_TX_STAT_ACK) {
if (sta->lost_packets)
sta->lost_packets = 0;
/* Track when last TDLS packet was ACKed */
if (test_sta_flag(sta, WLAN_STA_TDLS_PEER_AUTH))
sta->last_tdls_pkt_time = jiffies;
} else {
ieee80211_lost_packet(sta, info);
}
}
if (acked)
sta->last_ack_signal = info->status.ack_signal;
/*
* Measure frame removal for tx latency
* statistics calculation
*/
ieee80211_tx_latency_end_msrmnt(local, skb, sta, hdr);
}
rcu_read_unlock();
ieee80211_led_tx(local);
/* SNMP counters
* Fragments are passed to low-level drivers as separate skbs, so these
* are actually fragments, not frames. Update frame counters only for
* the first fragment of the frame. */
if ((info->flags & IEEE80211_TX_STAT_ACK) ||
(info->flags & IEEE80211_TX_STAT_NOACK_TRANSMITTED)) {
if (ieee80211_is_first_frag(hdr->seq_ctrl)) {
local->dot11TransmittedFrameCount++;
if (is_multicast_ether_addr(ieee80211_get_DA(hdr)))
local->dot11MulticastTransmittedFrameCount++;
if (retry_count > 0)
local->dot11RetryCount++;
if (retry_count > 1)
local->dot11MultipleRetryCount++;
}
/* This counter shall be incremented for an acknowledged MPDU
* with an individual address in the address 1 field or an MPDU
* with a multicast address in the address 1 field of type Data
* or Management. */
if (!is_multicast_ether_addr(hdr->addr1) ||
ieee80211_is_data(fc) ||
ieee80211_is_mgmt(fc))
local->dot11TransmittedFragmentCount++;
} else {
if (ieee80211_is_first_frag(hdr->seq_ctrl))
local->dot11FailedCount++;
}
if (ieee80211_is_nullfunc(fc) && ieee80211_has_pm(fc) &&
(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) &&
!(info->flags & IEEE80211_TX_CTL_INJECTED) &&
local->ps_sdata && !(local->scanning)) {
if (info->flags & IEEE80211_TX_STAT_ACK) {
local->ps_sdata->u.mgd.flags |=
IEEE80211_STA_NULLFUNC_ACKED;
} else
mod_timer(&local->dynamic_ps_timer, jiffies +
msecs_to_jiffies(10));
}
ieee80211_report_used_skb(local, skb, false);
/* this was a transmitted frame, but now we want to reuse it */
skb_orphan(skb);
/* Need to make a copy before skb->cb gets cleared */
send_to_cooked = !!(info->flags & IEEE80211_TX_CTL_INJECTED) ||
!(ieee80211_is_data(fc));
/*
* This is a bit racy but we can avoid a lot of work
* with this test...
*/
if (!local->monitors && (!send_to_cooked || !local->cooked_mntrs)) {
dev_kfree_skb(skb);
return;
}
/* send frame to monitor interfaces now */
rtap_len = ieee80211_tx_radiotap_len(info);
if (WARN_ON_ONCE(skb_headroom(skb) < rtap_len)) {
pr_err("ieee80211_tx_status: headroom too small\n");
dev_kfree_skb(skb);
return;
}
ieee80211_add_tx_radiotap_header(local, sband, skb, retry_count,
rtap_len, shift);
/* XXX: is this sufficient for BPF? */
skb_set_mac_header(skb, 0);
skb->ip_summed = CHECKSUM_UNNECESSARY;
skb->pkt_type = PACKET_OTHERHOST;
skb->protocol = htons(ETH_P_802_2);
memset(skb->cb, 0, sizeof(skb->cb));
rcu_read_lock();
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
if (sdata->vif.type == NL80211_IFTYPE_MONITOR) {
if (!ieee80211_sdata_running(sdata))
continue;
if ((sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) &&
!send_to_cooked)
continue;
if (prev_dev) {
skb2 = skb_clone(skb, GFP_ATOMIC);
if (skb2) {
skb2->dev = prev_dev;
netif_rx(skb2);
}
}
prev_dev = sdata->dev;
}
}
if (prev_dev) {
skb->dev = prev_dev;
netif_rx(skb);
skb = NULL;
}
rcu_read_unlock();
dev_kfree_skb(skb);
}
EXPORT_SYMBOL(ieee80211_tx_status);
void ieee80211_report_low_ack(struct ieee80211_sta *pubsta, u32 num_packets)
{
struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
cfg80211_cqm_pktloss_notify(sta->sdata->dev, sta->sta.addr,
num_packets, GFP_ATOMIC);
}
EXPORT_SYMBOL(ieee80211_report_low_ack);
void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct ieee80211_local *local = hw_to_local(hw);
ieee80211_report_used_skb(local, skb, true);
dev_kfree_skb_any(skb);
}
EXPORT_SYMBOL(ieee80211_free_txskb);
void ieee80211_purge_tx_queue(struct ieee80211_hw *hw,
struct sk_buff_head *skbs)
{
struct sk_buff *skb;
while ((skb = __skb_dequeue(skbs)))
ieee80211_free_txskb(hw, skb);
}