OpenCloudOS-Kernel/drivers/scsi/megaraid/megaraid_sas_fusion.h

767 lines
24 KiB
C
Raw Normal View History

/*
* Linux MegaRAID driver for SAS based RAID controllers
*
* Copyright (c) 2009-2012 LSI Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* FILE: megaraid_sas_fusion.h
*
* Authors: LSI Corporation
* Manoj Jose
* Sumant Patro
*
* Send feedback to: <megaraidlinux@lsi.com>
*
* Mail to: LSI Corporation, 1621 Barber Lane, Milpitas, CA 95035
* ATTN: Linuxraid
*/
#ifndef _MEGARAID_SAS_FUSION_H_
#define _MEGARAID_SAS_FUSION_H_
/* Fusion defines */
#define MEGASAS_MAX_SZ_CHAIN_FRAME 1024
#define MFI_FUSION_ENABLE_INTERRUPT_MASK (0x00000009)
#define MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE 256
#define MEGASAS_MPI2_FUNCTION_PASSTHRU_IO_REQUEST 0xF0
#define MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST 0xF1
#define MEGASAS_LOAD_BALANCE_FLAG 0x1
#define MEGASAS_DCMD_MBOX_PEND_FLAG 0x1
#define HOST_DIAG_WRITE_ENABLE 0x80
#define HOST_DIAG_RESET_ADAPTER 0x4
#define MEGASAS_FUSION_MAX_RESET_TRIES 3
#define MAX_MSIX_QUEUES_FUSION 128
/* Invader defines */
#define MPI2_TYPE_CUDA 0x2
#define MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH 0x4000
#define MR_RL_FLAGS_GRANT_DESTINATION_CPU0 0x00
#define MR_RL_FLAGS_GRANT_DESTINATION_CPU1 0x10
#define MR_RL_FLAGS_GRANT_DESTINATION_CUDA 0x80
#define MR_RL_FLAGS_SEQ_NUM_ENABLE 0x8
/* T10 PI defines */
#define MR_PROT_INFO_TYPE_CONTROLLER 0x8
#define MEGASAS_SCSI_VARIABLE_LENGTH_CMD 0x7f
#define MEGASAS_SCSI_SERVICE_ACTION_READ32 0x9
#define MEGASAS_SCSI_SERVICE_ACTION_WRITE32 0xB
#define MEGASAS_SCSI_ADDL_CDB_LEN 0x18
#define MEGASAS_RD_WR_PROTECT_CHECK_ALL 0x20
#define MEGASAS_RD_WR_PROTECT_CHECK_NONE 0x60
#define MPI2_SUP_REPLY_POST_HOST_INDEX_OFFSET (0x0000030C)
#define MPI2_REPLY_POST_HOST_INDEX_OFFSET (0x0000006C)
/*
* Raid context flags
*/
#define MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT 0x4
#define MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_MASK 0x30
enum MR_RAID_FLAGS_IO_SUB_TYPE {
MR_RAID_FLAGS_IO_SUB_TYPE_NONE = 0,
MR_RAID_FLAGS_IO_SUB_TYPE_SYSTEM_PD = 1,
};
/*
* Request descriptor types
*/
#define MEGASAS_REQ_DESCRIPT_FLAGS_LD_IO 0x7
#define MEGASAS_REQ_DESCRIPT_FLAGS_MFA 0x1
#define MEGASAS_REQ_DESCRIPT_FLAGS_NO_LOCK 0x2
#define MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT 1
#define MEGASAS_FP_CMD_LEN 16
#define MEGASAS_FUSION_IN_RESET 0
/*
* Raid Context structure which describes MegaRAID specific IO Parameters
* This resides at offset 0x60 where the SGL normally starts in MPT IO Frames
*/
struct RAID_CONTEXT {
#if defined(__BIG_ENDIAN_BITFIELD)
u8 nseg:4;
u8 Type:4;
#else
u8 Type:4;
u8 nseg:4;
#endif
u8 resvd0;
u16 timeoutValue;
u8 regLockFlags;
u8 resvd1;
u16 VirtualDiskTgtId;
u64 regLockRowLBA;
u32 regLockLength;
u16 nextLMId;
u8 exStatus;
u8 status;
u8 RAIDFlags;
u8 numSGE;
u16 configSeqNum;
u8 spanArm;
u8 resvd2[3];
};
#define RAID_CTX_SPANARM_ARM_SHIFT (0)
#define RAID_CTX_SPANARM_ARM_MASK (0x1f)
#define RAID_CTX_SPANARM_SPAN_SHIFT (5)
#define RAID_CTX_SPANARM_SPAN_MASK (0xE0)
/*
* define region lock types
*/
enum REGION_TYPE {
REGION_TYPE_UNUSED = 0,
REGION_TYPE_SHARED_READ = 1,
REGION_TYPE_SHARED_WRITE = 2,
REGION_TYPE_EXCLUSIVE = 3,
};
/* MPI2 defines */
#define MPI2_FUNCTION_IOC_INIT (0x02) /* IOC Init */
#define MPI2_WHOINIT_HOST_DRIVER (0x04)
#define MPI2_VERSION_MAJOR (0x02)
#define MPI2_VERSION_MINOR (0x00)
#define MPI2_VERSION_MAJOR_MASK (0xFF00)
#define MPI2_VERSION_MAJOR_SHIFT (8)
#define MPI2_VERSION_MINOR_MASK (0x00FF)
#define MPI2_VERSION_MINOR_SHIFT (0)
#define MPI2_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \
MPI2_VERSION_MINOR)
#define MPI2_HEADER_VERSION_UNIT (0x10)
#define MPI2_HEADER_VERSION_DEV (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
#define MPI2_HEADER_VERSION_DEV_MASK (0x00FF)
#define MPI2_HEADER_VERSION_DEV_SHIFT (0)
#define MPI2_HEADER_VERSION ((MPI2_HEADER_VERSION_UNIT << 8) | \
MPI2_HEADER_VERSION_DEV)
#define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR (0x03)
#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG (0x8000)
#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG (0x0400)
#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP (0x0003)
#define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG (0x0200)
#define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD (0x0100)
#define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP (0x0004)
#define MPI2_FUNCTION_SCSI_IO_REQUEST (0x00) /* SCSI IO */
#define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY (0x06)
#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO (0x00)
#define MPI2_SGE_FLAGS_64_BIT_ADDRESSING (0x02)
#define MPI2_SCSIIO_CONTROL_WRITE (0x01000000)
#define MPI2_SCSIIO_CONTROL_READ (0x02000000)
#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK (0x0E)
#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F)
#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00)
#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK (0x0F)
#define MPI2_WRSEQ_FLUSH_KEY_VALUE (0x0)
#define MPI2_WRITE_SEQUENCE_OFFSET (0x00000004)
#define MPI2_WRSEQ_1ST_KEY_VALUE (0xF)
#define MPI2_WRSEQ_2ND_KEY_VALUE (0x4)
#define MPI2_WRSEQ_3RD_KEY_VALUE (0xB)
#define MPI2_WRSEQ_4TH_KEY_VALUE (0x2)
#define MPI2_WRSEQ_5TH_KEY_VALUE (0x7)
#define MPI2_WRSEQ_6TH_KEY_VALUE (0xD)
struct MPI25_IEEE_SGE_CHAIN64 {
u64 Address;
u32 Length;
u16 Reserved1;
u8 NextChainOffset;
u8 Flags;
};
struct MPI2_SGE_SIMPLE_UNION {
u32 FlagsLength;
union {
u32 Address32;
u64 Address64;
} u;
};
struct MPI2_SCSI_IO_CDB_EEDP32 {
u8 CDB[20]; /* 0x00 */
u32 PrimaryReferenceTag; /* 0x14 */
u16 PrimaryApplicationTag; /* 0x18 */
u16 PrimaryApplicationTagMask; /* 0x1A */
u32 TransferLength; /* 0x1C */
};
struct MPI2_SGE_CHAIN_UNION {
u16 Length;
u8 NextChainOffset;
u8 Flags;
union {
u32 Address32;
u64 Address64;
} u;
};
struct MPI2_IEEE_SGE_SIMPLE32 {
u32 Address;
u32 FlagsLength;
};
struct MPI2_IEEE_SGE_CHAIN32 {
u32 Address;
u32 FlagsLength;
};
struct MPI2_IEEE_SGE_SIMPLE64 {
u64 Address;
u32 Length;
u16 Reserved1;
u8 Reserved2;
u8 Flags;
};
struct MPI2_IEEE_SGE_CHAIN64 {
u64 Address;
u32 Length;
u16 Reserved1;
u8 Reserved2;
u8 Flags;
};
union MPI2_IEEE_SGE_SIMPLE_UNION {
struct MPI2_IEEE_SGE_SIMPLE32 Simple32;
struct MPI2_IEEE_SGE_SIMPLE64 Simple64;
};
union MPI2_IEEE_SGE_CHAIN_UNION {
struct MPI2_IEEE_SGE_CHAIN32 Chain32;
struct MPI2_IEEE_SGE_CHAIN64 Chain64;
};
union MPI2_SGE_IO_UNION {
struct MPI2_SGE_SIMPLE_UNION MpiSimple;
struct MPI2_SGE_CHAIN_UNION MpiChain;
union MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
union MPI2_IEEE_SGE_CHAIN_UNION IeeeChain;
};
union MPI2_SCSI_IO_CDB_UNION {
u8 CDB32[32];
struct MPI2_SCSI_IO_CDB_EEDP32 EEDP32;
struct MPI2_SGE_SIMPLE_UNION SGE;
};
/*
* RAID SCSI IO Request Message
* Total SGE count will be one less than _MPI2_SCSI_IO_REQUEST
*/
struct MPI2_RAID_SCSI_IO_REQUEST {
u16 DevHandle; /* 0x00 */
u8 ChainOffset; /* 0x02 */
u8 Function; /* 0x03 */
u16 Reserved1; /* 0x04 */
u8 Reserved2; /* 0x06 */
u8 MsgFlags; /* 0x07 */
u8 VP_ID; /* 0x08 */
u8 VF_ID; /* 0x09 */
u16 Reserved3; /* 0x0A */
u32 SenseBufferLowAddress; /* 0x0C */
u16 SGLFlags; /* 0x10 */
u8 SenseBufferLength; /* 0x12 */
u8 Reserved4; /* 0x13 */
u8 SGLOffset0; /* 0x14 */
u8 SGLOffset1; /* 0x15 */
u8 SGLOffset2; /* 0x16 */
u8 SGLOffset3; /* 0x17 */
u32 SkipCount; /* 0x18 */
u32 DataLength; /* 0x1C */
u32 BidirectionalDataLength; /* 0x20 */
u16 IoFlags; /* 0x24 */
u16 EEDPFlags; /* 0x26 */
u32 EEDPBlockSize; /* 0x28 */
u32 SecondaryReferenceTag; /* 0x2C */
u16 SecondaryApplicationTag; /* 0x30 */
u16 ApplicationTagTranslationMask; /* 0x32 */
u8 LUN[8]; /* 0x34 */
u32 Control; /* 0x3C */
union MPI2_SCSI_IO_CDB_UNION CDB; /* 0x40 */
struct RAID_CONTEXT RaidContext; /* 0x60 */
union MPI2_SGE_IO_UNION SGL; /* 0x80 */
};
/*
* MPT RAID MFA IO Descriptor.
*/
struct MEGASAS_RAID_MFA_IO_REQUEST_DESCRIPTOR {
#if defined(__BIG_ENDIAN_BITFIELD)
u32 MessageAddress1:24; /* bits 31:8*/
u32 RequestFlags:8;
#else
u32 RequestFlags:8;
u32 MessageAddress1:24; /* bits 31:8*/
#endif
u32 MessageAddress2; /* bits 61:32 */
};
/* Default Request Descriptor */
struct MPI2_DEFAULT_REQUEST_DESCRIPTOR {
u8 RequestFlags; /* 0x00 */
u8 MSIxIndex; /* 0x01 */
u16 SMID; /* 0x02 */
u16 LMID; /* 0x04 */
u16 DescriptorTypeDependent; /* 0x06 */
};
/* High Priority Request Descriptor */
struct MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR {
u8 RequestFlags; /* 0x00 */
u8 MSIxIndex; /* 0x01 */
u16 SMID; /* 0x02 */
u16 LMID; /* 0x04 */
u16 Reserved1; /* 0x06 */
};
/* SCSI IO Request Descriptor */
struct MPI2_SCSI_IO_REQUEST_DESCRIPTOR {
u8 RequestFlags; /* 0x00 */
u8 MSIxIndex; /* 0x01 */
u16 SMID; /* 0x02 */
u16 LMID; /* 0x04 */
u16 DevHandle; /* 0x06 */
};
/* SCSI Target Request Descriptor */
struct MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR {
u8 RequestFlags; /* 0x00 */
u8 MSIxIndex; /* 0x01 */
u16 SMID; /* 0x02 */
u16 LMID; /* 0x04 */
u16 IoIndex; /* 0x06 */
};
/* RAID Accelerator Request Descriptor */
struct MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR {
u8 RequestFlags; /* 0x00 */
u8 MSIxIndex; /* 0x01 */
u16 SMID; /* 0x02 */
u16 LMID; /* 0x04 */
u16 Reserved; /* 0x06 */
};
/* union of Request Descriptors */
union MEGASAS_REQUEST_DESCRIPTOR_UNION {
struct MPI2_DEFAULT_REQUEST_DESCRIPTOR Default;
struct MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR HighPriority;
struct MPI2_SCSI_IO_REQUEST_DESCRIPTOR SCSIIO;
struct MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget;
struct MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR RAIDAccelerator;
struct MEGASAS_RAID_MFA_IO_REQUEST_DESCRIPTOR MFAIo;
union {
struct {
u32 low;
u32 high;
} u;
u64 Words;
};
};
/* Default Reply Descriptor */
struct MPI2_DEFAULT_REPLY_DESCRIPTOR {
u8 ReplyFlags; /* 0x00 */
u8 MSIxIndex; /* 0x01 */
u16 DescriptorTypeDependent1; /* 0x02 */
u32 DescriptorTypeDependent2; /* 0x04 */
};
/* Address Reply Descriptor */
struct MPI2_ADDRESS_REPLY_DESCRIPTOR {
u8 ReplyFlags; /* 0x00 */
u8 MSIxIndex; /* 0x01 */
u16 SMID; /* 0x02 */
u32 ReplyFrameAddress; /* 0x04 */
};
/* SCSI IO Success Reply Descriptor */
struct MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR {
u8 ReplyFlags; /* 0x00 */
u8 MSIxIndex; /* 0x01 */
u16 SMID; /* 0x02 */
u16 TaskTag; /* 0x04 */
u16 Reserved1; /* 0x06 */
};
/* TargetAssist Success Reply Descriptor */
struct MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR {
u8 ReplyFlags; /* 0x00 */
u8 MSIxIndex; /* 0x01 */
u16 SMID; /* 0x02 */
u8 SequenceNumber; /* 0x04 */
u8 Reserved1; /* 0x05 */
u16 IoIndex; /* 0x06 */
};
/* Target Command Buffer Reply Descriptor */
struct MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR {
u8 ReplyFlags; /* 0x00 */
u8 MSIxIndex; /* 0x01 */
u8 VP_ID; /* 0x02 */
u8 Flags; /* 0x03 */
u16 InitiatorDevHandle; /* 0x04 */
u16 IoIndex; /* 0x06 */
};
/* RAID Accelerator Success Reply Descriptor */
struct MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR {
u8 ReplyFlags; /* 0x00 */
u8 MSIxIndex; /* 0x01 */
u16 SMID; /* 0x02 */
u32 Reserved; /* 0x04 */
};
/* union of Reply Descriptors */
union MPI2_REPLY_DESCRIPTORS_UNION {
struct MPI2_DEFAULT_REPLY_DESCRIPTOR Default;
struct MPI2_ADDRESS_REPLY_DESCRIPTOR AddressReply;
struct MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR SCSIIOSuccess;
struct MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess;
struct MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer;
struct MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR
RAIDAcceleratorSuccess;
u64 Words;
};
/* IOCInit Request message */
struct MPI2_IOC_INIT_REQUEST {
u8 WhoInit; /* 0x00 */
u8 Reserved1; /* 0x01 */
u8 ChainOffset; /* 0x02 */
u8 Function; /* 0x03 */
u16 Reserved2; /* 0x04 */
u8 Reserved3; /* 0x06 */
u8 MsgFlags; /* 0x07 */
u8 VP_ID; /* 0x08 */
u8 VF_ID; /* 0x09 */
u16 Reserved4; /* 0x0A */
u16 MsgVersion; /* 0x0C */
u16 HeaderVersion; /* 0x0E */
u32 Reserved5; /* 0x10 */
u16 Reserved6; /* 0x14 */
u8 Reserved7; /* 0x16 */
u8 HostMSIxVectors; /* 0x17 */
u16 Reserved8; /* 0x18 */
u16 SystemRequestFrameSize; /* 0x1A */
u16 ReplyDescriptorPostQueueDepth; /* 0x1C */
u16 ReplyFreeQueueDepth; /* 0x1E */
u32 SenseBufferAddressHigh; /* 0x20 */
u32 SystemReplyAddressHigh; /* 0x24 */
u64 SystemRequestFrameBaseAddress; /* 0x28 */
u64 ReplyDescriptorPostQueueAddress;/* 0x30 */
u64 ReplyFreeQueueAddress; /* 0x38 */
u64 TimeStamp; /* 0x40 */
};
/* mrpriv defines */
#define MR_PD_INVALID 0xFFFF
#define MAX_SPAN_DEPTH 8
[SCSI] megaraid_sas: Add support for Uneven Span PRL11 MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-22 15:05:04 +08:00
#define MAX_QUAD_DEPTH MAX_SPAN_DEPTH
#define MAX_RAIDMAP_SPAN_DEPTH (MAX_SPAN_DEPTH)
#define MAX_ROW_SIZE 32
#define MAX_RAIDMAP_ROW_SIZE (MAX_ROW_SIZE)
#define MAX_LOGICAL_DRIVES 64
#define MAX_RAIDMAP_LOGICAL_DRIVES (MAX_LOGICAL_DRIVES)
#define MAX_RAIDMAP_VIEWS (MAX_LOGICAL_DRIVES)
#define MAX_ARRAYS 128
#define MAX_RAIDMAP_ARRAYS (MAX_ARRAYS)
#define MAX_PHYSICAL_DEVICES 256
#define MAX_RAIDMAP_PHYSICAL_DEVICES (MAX_PHYSICAL_DEVICES)
#define MR_DCMD_LD_MAP_GET_INFO 0x0300e101
#define MR_DCMD_CTRL_SHARED_HOST_MEM_ALLOC 0x010e8485 /* SR-IOV HB alloc*/
#define MR_DCMD_LD_VF_MAP_GET_ALL_LDS_111 0x03200200
#define MR_DCMD_LD_VF_MAP_GET_ALL_LDS 0x03150200
struct MR_DEV_HANDLE_INFO {
u16 curDevHdl;
u8 validHandles;
u8 reserved;
u16 devHandle[2];
};
struct MR_ARRAY_INFO {
u16 pd[MAX_RAIDMAP_ROW_SIZE];
};
struct MR_QUAD_ELEMENT {
u64 logStart;
u64 logEnd;
u64 offsetInSpan;
u32 diff;
u32 reserved1;
};
struct MR_SPAN_INFO {
u32 noElements;
u32 reserved1;
struct MR_QUAD_ELEMENT quad[MAX_RAIDMAP_SPAN_DEPTH];
};
struct MR_LD_SPAN {
u64 startBlk;
u64 numBlks;
u16 arrayRef;
[SCSI] megaraid_sas: Add support for Uneven Span PRL11 MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-22 15:05:04 +08:00
u8 spanRowSize;
u8 spanRowDataSize;
u8 reserved[4];
};
struct MR_SPAN_BLOCK_INFO {
u64 num_rows;
struct MR_LD_SPAN span;
struct MR_SPAN_INFO block_span_info;
};
struct MR_LD_RAID {
struct {
#if defined(__BIG_ENDIAN_BITFIELD)
u32 reserved4:7;
u32 fpNonRWCapable:1;
u32 fpReadAcrossStripe:1;
u32 fpWriteAcrossStripe:1;
u32 fpReadCapable:1;
u32 fpWriteCapable:1;
u32 encryptionType:8;
u32 pdPiMode:4;
u32 ldPiMode:4;
u32 reserved5:3;
u32 fpCapable:1;
#else
u32 fpCapable:1;
u32 reserved5:3;
u32 ldPiMode:4;
u32 pdPiMode:4;
u32 encryptionType:8;
u32 fpWriteCapable:1;
u32 fpReadCapable:1;
u32 fpWriteAcrossStripe:1;
u32 fpReadAcrossStripe:1;
u32 fpNonRWCapable:1;
u32 reserved4:7;
#endif
} capability;
u32 reserved6;
u64 size;
u8 spanDepth;
u8 level;
u8 stripeShift;
u8 rowSize;
u8 rowDataSize;
u8 writeMode;
u8 PRL;
u8 SRL;
u16 targetId;
u8 ldState;
u8 regTypeReqOnWrite;
u8 modFactor;
u8 regTypeReqOnRead;
u16 seqNum;
struct {
u32 ldSyncRequired:1;
u32 reserved:31;
} flags;
u8 LUN[8]; /* 0x24 8 byte LUN field used for SCSI IO's */
u8 fpIoTimeoutForLd;/*0x2C timeout value used by driver in FP IO*/
u8 reserved3[0x80-0x2D]; /* 0x2D */
};
struct MR_LD_SPAN_MAP {
struct MR_LD_RAID ldRaid;
u8 dataArmMap[MAX_RAIDMAP_ROW_SIZE];
struct MR_SPAN_BLOCK_INFO spanBlock[MAX_RAIDMAP_SPAN_DEPTH];
};
struct MR_FW_RAID_MAP {
u32 totalSize;
union {
struct {
u32 maxLd;
u32 maxSpanDepth;
u32 maxRowSize;
u32 maxPdCount;
u32 maxArrays;
} validationInfo;
u32 version[5];
u32 reserved1[5];
};
u32 ldCount;
u32 Reserved1;
u8 ldTgtIdToLd[MAX_RAIDMAP_LOGICAL_DRIVES+
MAX_RAIDMAP_VIEWS];
u8 fpPdIoTimeoutSec;
u8 reserved2[7];
struct MR_ARRAY_INFO arMapInfo[MAX_RAIDMAP_ARRAYS];
struct MR_DEV_HANDLE_INFO devHndlInfo[MAX_RAIDMAP_PHYSICAL_DEVICES];
struct MR_LD_SPAN_MAP ldSpanMap[1];
};
struct IO_REQUEST_INFO {
u64 ldStartBlock;
u32 numBlocks;
u16 ldTgtId;
u8 isRead;
u16 devHandle;
u64 pdBlock;
u8 fpOkForIo;
[SCSI] megaraid_sas: Add support for Uneven Span PRL11 MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-22 15:05:04 +08:00
u8 IoforUnevenSpan;
u8 start_span;
u8 reserved;
u64 start_row;
};
struct MR_LD_TARGET_SYNC {
u8 targetId;
u8 reserved;
u16 seqNum;
};
#define IEEE_SGE_FLAGS_ADDR_MASK (0x03)
#define IEEE_SGE_FLAGS_SYSTEM_ADDR (0x00)
#define IEEE_SGE_FLAGS_IOCDDR_ADDR (0x01)
#define IEEE_SGE_FLAGS_IOCPLB_ADDR (0x02)
#define IEEE_SGE_FLAGS_IOCPLBNTA_ADDR (0x03)
#define IEEE_SGE_FLAGS_CHAIN_ELEMENT (0x80)
#define IEEE_SGE_FLAGS_END_OF_LIST (0x40)
struct megasas_register_set;
struct megasas_instance;
union desc_word {
u64 word;
struct {
u32 low;
u32 high;
} u;
};
struct megasas_cmd_fusion {
struct MPI2_RAID_SCSI_IO_REQUEST *io_request;
dma_addr_t io_request_phys_addr;
union MPI2_SGE_IO_UNION *sg_frame;
dma_addr_t sg_frame_phys_addr;
u8 *sense;
dma_addr_t sense_phys_addr;
struct list_head list;
struct scsi_cmnd *scmd;
struct megasas_instance *instance;
u8 retry_for_fw_reset;
union MEGASAS_REQUEST_DESCRIPTOR_UNION *request_desc;
/*
* Context for a MFI frame.
* Used to get the mfi cmd from list when a MFI cmd is completed
*/
u32 sync_cmd_idx;
u32 index;
u8 flags;
};
struct LD_LOAD_BALANCE_INFO {
u8 loadBalanceFlag;
u8 reserved1;
u16 raid1DevHandle[2];
atomic_t scsi_pending_cmds[2];
u64 last_accessed_block[2];
};
[SCSI] megaraid_sas: Add support for Uneven Span PRL11 MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-22 15:05:04 +08:00
/* SPAN_SET is info caclulated from span info from Raid map per LD */
typedef struct _LD_SPAN_SET {
u64 log_start_lba;
u64 log_end_lba;
u64 span_row_start;
u64 span_row_end;
u64 data_strip_start;
u64 data_strip_end;
u64 data_row_start;
u64 data_row_end;
u8 strip_offset[MAX_SPAN_DEPTH];
u32 span_row_data_width;
u32 diff;
u32 reserved[2];
} LD_SPAN_SET, *PLD_SPAN_SET;
typedef struct LOG_BLOCK_SPAN_INFO {
LD_SPAN_SET span_set[MAX_SPAN_DEPTH];
} LD_SPAN_INFO, *PLD_SPAN_INFO;
struct MR_FW_RAID_MAP_ALL {
struct MR_FW_RAID_MAP raidMap;
struct MR_LD_SPAN_MAP ldSpanMap[MAX_LOGICAL_DRIVES - 1];
} __attribute__ ((packed));
struct fusion_context {
struct megasas_cmd_fusion **cmd_list;
struct list_head cmd_pool;
spinlock_t cmd_pool_lock;
dma_addr_t req_frames_desc_phys;
u8 *req_frames_desc;
struct dma_pool *io_request_frames_pool;
dma_addr_t io_request_frames_phys;
u8 *io_request_frames;
struct dma_pool *sg_dma_pool;
struct dma_pool *sense_dma_pool;
dma_addr_t reply_frames_desc_phys;
union MPI2_REPLY_DESCRIPTORS_UNION *reply_frames_desc;
struct dma_pool *reply_frames_desc_pool;
u16 last_reply_idx[MAX_MSIX_QUEUES_FUSION];
u32 reply_q_depth;
u32 request_alloc_sz;
u32 reply_alloc_sz;
u32 io_frames_alloc_sz;
u16 max_sge_in_main_msg;
u16 max_sge_in_chain;
u8 chain_offset_io_request;
u8 chain_offset_mfi_pthru;
struct MR_FW_RAID_MAP_ALL *ld_map[2];
dma_addr_t ld_map_phys[2];
u32 map_sz;
u8 fast_path_io;
struct LD_LOAD_BALANCE_INFO load_balance_info[MAX_LOGICAL_DRIVES];
[SCSI] megaraid_sas: Add support for Uneven Span PRL11 MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-22 15:05:04 +08:00
LD_SPAN_INFO log_to_span[MAX_LOGICAL_DRIVES];
};
union desc_value {
u64 word;
struct {
u32 low;
u32 high;
} u;
};
#endif /* _MEGARAID_SAS_FUSION_H_ */