2019-07-31 23:57:31 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-only
|
2018-07-26 20:21:58 +08:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2018 HUAWEI, Inc.
|
2020-07-13 21:09:44 +08:00
|
|
|
* https://www.huawei.com/
|
2018-07-26 20:21:58 +08:00
|
|
|
*/
|
2019-07-31 23:57:32 +08:00
|
|
|
#include "zdata.h"
|
2019-06-24 15:22:54 +08:00
|
|
|
#include "compress.h"
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
#include <linux/prefetch.h>
|
|
|
|
|
2018-09-18 22:27:27 +08:00
|
|
|
#include <trace/events/erofs.h>
|
|
|
|
|
2021-04-07 12:39:20 +08:00
|
|
|
/*
|
|
|
|
* since pclustersize is variable for big pcluster feature, introduce slab
|
|
|
|
* pools implementation for different pcluster sizes.
|
|
|
|
*/
|
|
|
|
struct z_erofs_pcluster_slab {
|
|
|
|
struct kmem_cache *slab;
|
|
|
|
unsigned int maxpages;
|
|
|
|
char name[48];
|
|
|
|
};
|
|
|
|
|
|
|
|
#define _PCLP(n) { .maxpages = n }
|
|
|
|
|
|
|
|
static struct z_erofs_pcluster_slab pcluster_pool[] __read_mostly = {
|
|
|
|
_PCLP(1), _PCLP(4), _PCLP(16), _PCLP(64), _PCLP(128),
|
|
|
|
_PCLP(Z_EROFS_PCLUSTER_MAX_PAGES)
|
|
|
|
};
|
|
|
|
|
|
|
|
static void z_erofs_destroy_pcluster_pool(void)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(pcluster_pool); ++i) {
|
|
|
|
if (!pcluster_pool[i].slab)
|
|
|
|
continue;
|
|
|
|
kmem_cache_destroy(pcluster_pool[i].slab);
|
|
|
|
pcluster_pool[i].slab = NULL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int z_erofs_create_pcluster_pool(void)
|
|
|
|
{
|
|
|
|
struct z_erofs_pcluster_slab *pcs;
|
|
|
|
struct z_erofs_pcluster *a;
|
|
|
|
unsigned int size;
|
|
|
|
|
|
|
|
for (pcs = pcluster_pool;
|
|
|
|
pcs < pcluster_pool + ARRAY_SIZE(pcluster_pool); ++pcs) {
|
|
|
|
size = struct_size(a, compressed_pages, pcs->maxpages);
|
|
|
|
|
|
|
|
sprintf(pcs->name, "erofs_pcluster-%u", pcs->maxpages);
|
|
|
|
pcs->slab = kmem_cache_create(pcs->name, size, 0,
|
|
|
|
SLAB_RECLAIM_ACCOUNT, NULL);
|
|
|
|
if (pcs->slab)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
z_erofs_destroy_pcluster_pool();
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct z_erofs_pcluster *z_erofs_alloc_pcluster(unsigned int nrpages)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(pcluster_pool); ++i) {
|
|
|
|
struct z_erofs_pcluster_slab *pcs = pcluster_pool + i;
|
|
|
|
struct z_erofs_pcluster *pcl;
|
|
|
|
|
|
|
|
if (nrpages > pcs->maxpages)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
pcl = kmem_cache_zalloc(pcs->slab, GFP_NOFS);
|
|
|
|
if (!pcl)
|
|
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
pcl->pclusterpages = nrpages;
|
|
|
|
return pcl;
|
|
|
|
}
|
|
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void z_erofs_free_pcluster(struct z_erofs_pcluster *pcl)
|
|
|
|
{
|
2021-12-29 07:29:19 +08:00
|
|
|
unsigned int pclusterpages = z_erofs_pclusterpages(pcl);
|
2021-04-07 12:39:20 +08:00
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(pcluster_pool); ++i) {
|
|
|
|
struct z_erofs_pcluster_slab *pcs = pcluster_pool + i;
|
|
|
|
|
2021-12-29 07:29:19 +08:00
|
|
|
if (pclusterpages > pcs->maxpages)
|
2021-04-07 12:39:20 +08:00
|
|
|
continue;
|
|
|
|
|
|
|
|
kmem_cache_free(pcs->slab, pcl);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
DBG_BUGON(1);
|
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
/* how to allocate cached pages for a pcluster */
|
2018-12-08 00:19:16 +08:00
|
|
|
enum z_erofs_cache_alloctype {
|
|
|
|
DONTALLOC, /* don't allocate any cached pages */
|
2020-12-09 20:37:17 +08:00
|
|
|
/*
|
|
|
|
* try to use cached I/O if page allocation succeeds or fallback
|
|
|
|
* to in-place I/O instead to avoid any direct reclaim.
|
|
|
|
*/
|
|
|
|
TRYALLOC,
|
2018-12-08 00:19:16 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* tagged pointer with 1-bit tag for all compressed pages
|
|
|
|
* tag 0 - the page is just found with an extra page reference
|
|
|
|
*/
|
|
|
|
typedef tagptr1_t compressed_page_t;
|
|
|
|
|
|
|
|
#define tag_compressed_page_justfound(page) \
|
|
|
|
tagptr_fold(compressed_page_t, page, 1)
|
|
|
|
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
static struct workqueue_struct *z_erofs_workqueue __read_mostly;
|
|
|
|
|
|
|
|
void z_erofs_exit_zip_subsystem(void)
|
|
|
|
{
|
|
|
|
destroy_workqueue(z_erofs_workqueue);
|
2021-04-07 12:39:20 +08:00
|
|
|
z_erofs_destroy_pcluster_pool();
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2019-09-04 10:09:05 +08:00
|
|
|
static inline int z_erofs_init_workqueue(void)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2018-09-11 03:41:14 +08:00
|
|
|
const unsigned int onlinecpus = num_possible_cpus();
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/*
|
2019-07-31 23:57:47 +08:00
|
|
|
* no need to spawn too many threads, limiting threads could minimum
|
|
|
|
* scheduling overhead, perhaps per-CPU threads should be better?
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
*/
|
2020-07-31 10:40:49 +08:00
|
|
|
z_erofs_workqueue = alloc_workqueue("erofs_unzipd",
|
|
|
|
WQ_UNBOUND | WQ_HIGHPRI,
|
2019-07-31 23:57:47 +08:00
|
|
|
onlinecpus + onlinecpus / 4);
|
2018-11-13 04:43:57 +08:00
|
|
|
return z_erofs_workqueue ? 0 : -ENOMEM;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2018-10-09 21:43:53 +08:00
|
|
|
int __init z_erofs_init_zip_subsystem(void)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2021-04-07 12:39:20 +08:00
|
|
|
int err = z_erofs_create_pcluster_pool();
|
|
|
|
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
err = z_erofs_init_workqueue();
|
|
|
|
if (err)
|
|
|
|
z_erofs_destroy_pcluster_pool();
|
|
|
|
return err;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
enum z_erofs_collectmode {
|
|
|
|
COLLECT_SECONDARY,
|
|
|
|
COLLECT_PRIMARY,
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
/*
|
2019-07-31 23:57:47 +08:00
|
|
|
* The current collection was the tail of an exist chain, in addition
|
|
|
|
* that the previous processed chained collections are all decided to
|
|
|
|
* be hooked up to it.
|
|
|
|
* A new chain will be created for the remaining collections which are
|
|
|
|
* not processed yet, therefore different from COLLECT_PRIMARY_FOLLOWED,
|
|
|
|
* the next collection cannot reuse the whole page safely in
|
|
|
|
* the following scenario:
|
2019-02-27 13:33:32 +08:00
|
|
|
* ________________________________________________________________
|
|
|
|
* | tail (partial) page | head (partial) page |
|
2019-07-31 23:57:47 +08:00
|
|
|
* | (belongs to the next cl) | (belongs to the current cl) |
|
2019-02-27 13:33:32 +08:00
|
|
|
* |_______PRIMARY_FOLLOWED_______|________PRIMARY_HOOKED___________|
|
|
|
|
*/
|
2019-07-31 23:57:47 +08:00
|
|
|
COLLECT_PRIMARY_HOOKED,
|
erofs: complete a missing case for inplace I/O
Add a missing case which could cause unnecessary page allocation but
not directly use inplace I/O instead, which increases runtime extra
memory footprint.
The detail is, considering an online file-backed page, the right half
of the page is chosen to be cached (e.g. the end page of a readahead
request) and some of its data doesn't exist in managed cache, so the
pcluster will be definitely kept in the submission chain. (IOWs, it
cannot be decompressed without I/O, e.g., due to the bypass queue).
Currently, DELAYEDALLOC/TRYALLOC cases can be downgraded as NOINPLACE,
and stop online pages from inplace I/O. After this patch, unneeded page
allocations won't be observed in pickup_page_for_submission() then.
Link: https://lore.kernel.org/r/20210321183227.5182-1-hsiangkao@aol.com
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
2021-03-22 02:32:27 +08:00
|
|
|
/*
|
|
|
|
* a weak form of COLLECT_PRIMARY_FOLLOWED, the difference is that it
|
|
|
|
* could be dispatched into bypass queue later due to uptodated managed
|
|
|
|
* pages. All related online pages cannot be reused for inplace I/O (or
|
|
|
|
* pagevec) since it can be directly decoded without I/O submission.
|
|
|
|
*/
|
2019-07-31 23:57:47 +08:00
|
|
|
COLLECT_PRIMARY_FOLLOWED_NOINPLACE,
|
2019-02-27 13:33:32 +08:00
|
|
|
/*
|
2019-07-31 23:57:47 +08:00
|
|
|
* The current collection has been linked with the owned chain, and
|
|
|
|
* could also be linked with the remaining collections, which means
|
|
|
|
* if the processing page is the tail page of the collection, thus
|
|
|
|
* the current collection can safely use the whole page (since
|
|
|
|
* the previous collection is under control) for in-place I/O, as
|
|
|
|
* illustrated below:
|
2019-02-27 13:33:32 +08:00
|
|
|
* ________________________________________________________________
|
2019-07-31 23:57:47 +08:00
|
|
|
* | tail (partial) page | head (partial) page |
|
|
|
|
* | (of the current cl) | (of the previous collection) |
|
|
|
|
* | PRIMARY_FOLLOWED or | |
|
|
|
|
* |_____PRIMARY_HOOKED___|____________PRIMARY_FOLLOWED____________|
|
2019-02-27 13:33:32 +08:00
|
|
|
*
|
2019-07-31 23:57:47 +08:00
|
|
|
* [ (*) the above page can be used as inplace I/O. ]
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
*/
|
2019-07-31 23:57:47 +08:00
|
|
|
COLLECT_PRIMARY_FOLLOWED,
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
};
|
|
|
|
|
2022-03-02 03:49:50 +08:00
|
|
|
struct z_erofs_decompress_frontend {
|
|
|
|
struct inode *const inode;
|
|
|
|
struct erofs_map_blocks map;
|
|
|
|
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
struct z_erofs_pagevec_ctor vector;
|
|
|
|
|
2019-08-21 11:09:08 +08:00
|
|
|
struct z_erofs_pcluster *pcl, *tailpcl;
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_collection *cl;
|
2021-04-07 12:39:21 +08:00
|
|
|
/* a pointer used to pick up inplace I/O pages */
|
|
|
|
struct page **icpage_ptr;
|
2019-07-31 23:57:47 +08:00
|
|
|
z_erofs_next_pcluster_t owned_head;
|
|
|
|
|
|
|
|
enum z_erofs_collectmode mode;
|
|
|
|
|
2020-09-19 15:27:30 +08:00
|
|
|
bool readahead;
|
2019-07-31 23:57:47 +08:00
|
|
|
/* used for applying cache strategy on the fly */
|
|
|
|
bool backmost;
|
|
|
|
erofs_off_t headoffset;
|
|
|
|
};
|
|
|
|
|
|
|
|
#define DECOMPRESS_FRONTEND_INIT(__i) { \
|
2022-03-02 03:49:50 +08:00
|
|
|
.inode = __i, .owned_head = Z_EROFS_PCLUSTER_TAIL, \
|
|
|
|
.mode = COLLECT_PRIMARY_FOLLOWED }
|
2019-07-31 23:57:47 +08:00
|
|
|
|
|
|
|
static struct page *z_pagemap_global[Z_EROFS_VMAP_GLOBAL_PAGES];
|
|
|
|
static DEFINE_MUTEX(z_pagemap_global_lock);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2022-03-02 03:49:51 +08:00
|
|
|
static void z_erofs_bind_cache(struct z_erofs_decompress_frontend *fe,
|
|
|
|
enum z_erofs_cache_alloctype type,
|
|
|
|
struct page **pagepool)
|
2018-07-26 20:22:07 +08:00
|
|
|
{
|
2022-03-02 03:49:51 +08:00
|
|
|
struct address_space *mc = MNGD_MAPPING(EROFS_I_SB(fe->inode));
|
2022-03-02 03:49:50 +08:00
|
|
|
struct z_erofs_pcluster *pcl = fe->pcl;
|
2018-12-08 00:19:16 +08:00
|
|
|
bool standalone = true;
|
2022-03-02 03:49:51 +08:00
|
|
|
/*
|
|
|
|
* optimistic allocation without direct reclaim since inplace I/O
|
|
|
|
* can be used if low memory otherwise.
|
|
|
|
*/
|
2020-12-09 20:37:17 +08:00
|
|
|
gfp_t gfp = (mapping_gfp_mask(mc) & ~__GFP_DIRECT_RECLAIM) |
|
|
|
|
__GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN;
|
2021-04-07 12:39:21 +08:00
|
|
|
struct page **pages;
|
|
|
|
pgoff_t index;
|
2018-12-08 00:19:16 +08:00
|
|
|
|
2022-03-02 03:49:50 +08:00
|
|
|
if (fe->mode < COLLECT_PRIMARY_FOLLOWED)
|
2018-12-08 00:19:16 +08:00
|
|
|
return;
|
|
|
|
|
2021-04-07 12:39:21 +08:00
|
|
|
pages = pcl->compressed_pages;
|
|
|
|
index = pcl->obj.index;
|
|
|
|
for (; index < pcl->obj.index + pcl->pclusterpages; ++index, ++pages) {
|
2018-12-08 00:19:16 +08:00
|
|
|
struct page *page;
|
|
|
|
compressed_page_t t;
|
2020-12-09 20:37:17 +08:00
|
|
|
struct page *newpage = NULL;
|
2018-12-08 00:19:16 +08:00
|
|
|
|
|
|
|
/* the compressed page was loaded before */
|
2019-07-31 23:57:47 +08:00
|
|
|
if (READ_ONCE(*pages))
|
2018-07-26 20:22:07 +08:00
|
|
|
continue;
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
page = find_get_page(mc, index);
|
2018-12-08 00:19:16 +08:00
|
|
|
|
|
|
|
if (page) {
|
|
|
|
t = tag_compressed_page_justfound(page);
|
erofs: complete a missing case for inplace I/O
Add a missing case which could cause unnecessary page allocation but
not directly use inplace I/O instead, which increases runtime extra
memory footprint.
The detail is, considering an online file-backed page, the right half
of the page is chosen to be cached (e.g. the end page of a readahead
request) and some of its data doesn't exist in managed cache, so the
pcluster will be definitely kept in the submission chain. (IOWs, it
cannot be decompressed without I/O, e.g., due to the bypass queue).
Currently, DELAYEDALLOC/TRYALLOC cases can be downgraded as NOINPLACE,
and stop online pages from inplace I/O. After this patch, unneeded page
allocations won't be observed in pickup_page_for_submission() then.
Link: https://lore.kernel.org/r/20210321183227.5182-1-hsiangkao@aol.com
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
2021-03-22 02:32:27 +08:00
|
|
|
} else {
|
|
|
|
/* I/O is needed, no possible to decompress directly */
|
2018-12-08 00:19:16 +08:00
|
|
|
standalone = false;
|
erofs: complete a missing case for inplace I/O
Add a missing case which could cause unnecessary page allocation but
not directly use inplace I/O instead, which increases runtime extra
memory footprint.
The detail is, considering an online file-backed page, the right half
of the page is chosen to be cached (e.g. the end page of a readahead
request) and some of its data doesn't exist in managed cache, so the
pcluster will be definitely kept in the submission chain. (IOWs, it
cannot be decompressed without I/O, e.g., due to the bypass queue).
Currently, DELAYEDALLOC/TRYALLOC cases can be downgraded as NOINPLACE,
and stop online pages from inplace I/O. After this patch, unneeded page
allocations won't be observed in pickup_page_for_submission() then.
Link: https://lore.kernel.org/r/20210321183227.5182-1-hsiangkao@aol.com
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
2021-03-22 02:32:27 +08:00
|
|
|
switch (type) {
|
|
|
|
case TRYALLOC:
|
|
|
|
newpage = erofs_allocpage(pagepool, gfp);
|
|
|
|
if (!newpage)
|
|
|
|
continue;
|
|
|
|
set_page_private(newpage,
|
|
|
|
Z_EROFS_PREALLOCATED_PAGE);
|
|
|
|
t = tag_compressed_page_justfound(newpage);
|
|
|
|
break;
|
|
|
|
default: /* DONTALLOC */
|
|
|
|
continue;
|
|
|
|
}
|
2018-07-26 20:22:07 +08:00
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
if (!cmpxchg_relaxed(pages, NULL, tagptr_cast_ptr(t)))
|
2018-07-26 20:22:07 +08:00
|
|
|
continue;
|
|
|
|
|
2021-10-22 17:01:20 +08:00
|
|
|
if (page)
|
2018-12-08 00:19:16 +08:00
|
|
|
put_page(page);
|
2021-10-22 17:01:20 +08:00
|
|
|
else if (newpage)
|
|
|
|
erofs_pagepool_add(pagepool, newpage);
|
2018-07-26 20:22:07 +08:00
|
|
|
}
|
2018-12-08 00:19:16 +08:00
|
|
|
|
erofs: complete a missing case for inplace I/O
Add a missing case which could cause unnecessary page allocation but
not directly use inplace I/O instead, which increases runtime extra
memory footprint.
The detail is, considering an online file-backed page, the right half
of the page is chosen to be cached (e.g. the end page of a readahead
request) and some of its data doesn't exist in managed cache, so the
pcluster will be definitely kept in the submission chain. (IOWs, it
cannot be decompressed without I/O, e.g., due to the bypass queue).
Currently, DELAYEDALLOC/TRYALLOC cases can be downgraded as NOINPLACE,
and stop online pages from inplace I/O. After this patch, unneeded page
allocations won't be observed in pickup_page_for_submission() then.
Link: https://lore.kernel.org/r/20210321183227.5182-1-hsiangkao@aol.com
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
2021-03-22 02:32:27 +08:00
|
|
|
/*
|
|
|
|
* don't do inplace I/O if all compressed pages are available in
|
|
|
|
* managed cache since it can be moved to the bypass queue instead.
|
|
|
|
*/
|
|
|
|
if (standalone)
|
2022-03-02 03:49:50 +08:00
|
|
|
fe->mode = COLLECT_PRIMARY_FOLLOWED_NOINPLACE;
|
2018-07-26 20:22:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* called by erofs_shrinker to get rid of all compressed_pages */
|
2018-07-29 13:34:58 +08:00
|
|
|
int erofs_try_to_free_all_cached_pages(struct erofs_sb_info *sbi,
|
2019-07-31 23:57:47 +08:00
|
|
|
struct erofs_workgroup *grp)
|
2018-07-26 20:22:07 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_pcluster *const pcl =
|
|
|
|
container_of(grp, struct z_erofs_pcluster, obj);
|
2018-07-26 20:22:07 +08:00
|
|
|
int i;
|
|
|
|
|
2021-12-29 07:29:19 +08:00
|
|
|
DBG_BUGON(z_erofs_is_inline_pcluster(pcl));
|
2018-07-26 20:22:07 +08:00
|
|
|
/*
|
|
|
|
* refcount of workgroup is now freezed as 1,
|
|
|
|
* therefore no need to worry about available decompression users.
|
|
|
|
*/
|
2021-04-07 12:39:20 +08:00
|
|
|
for (i = 0; i < pcl->pclusterpages; ++i) {
|
2019-07-31 23:57:47 +08:00
|
|
|
struct page *page = pcl->compressed_pages[i];
|
2018-07-26 20:22:07 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
if (!page)
|
2018-07-26 20:22:07 +08:00
|
|
|
continue;
|
|
|
|
|
|
|
|
/* block other users from reclaiming or migrating the page */
|
|
|
|
if (!trylock_page(page))
|
|
|
|
return -EBUSY;
|
|
|
|
|
2021-08-10 14:54:50 +08:00
|
|
|
if (!erofs_page_is_managed(sbi, page))
|
2019-07-31 23:57:47 +08:00
|
|
|
continue;
|
2018-07-26 20:22:07 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
/* barrier is implied in the following 'unlock_page' */
|
|
|
|
WRITE_ONCE(pcl->compressed_pages[i], NULL);
|
2020-12-08 17:58:32 +08:00
|
|
|
detach_page_private(page);
|
2018-07-26 20:22:07 +08:00
|
|
|
unlock_page(page);
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2021-08-10 15:24:16 +08:00
|
|
|
int erofs_try_to_free_cached_page(struct page *page)
|
2018-07-26 20:22:07 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_pcluster *const pcl = (void *)page_private(page);
|
2018-07-26 20:22:07 +08:00
|
|
|
int ret = 0; /* 0 - busy */
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
if (erofs_workgroup_try_to_freeze(&pcl->obj, 1)) {
|
2018-07-26 20:22:07 +08:00
|
|
|
unsigned int i;
|
|
|
|
|
2021-12-29 07:29:19 +08:00
|
|
|
DBG_BUGON(z_erofs_is_inline_pcluster(pcl));
|
2021-04-07 12:39:20 +08:00
|
|
|
for (i = 0; i < pcl->pclusterpages; ++i) {
|
2019-07-31 23:57:47 +08:00
|
|
|
if (pcl->compressed_pages[i] == page) {
|
|
|
|
WRITE_ONCE(pcl->compressed_pages[i], NULL);
|
2018-07-26 20:22:07 +08:00
|
|
|
ret = 1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
2019-07-31 23:57:47 +08:00
|
|
|
erofs_workgroup_unfreeze(&pcl->obj, 1);
|
2018-07-26 20:22:07 +08:00
|
|
|
|
2020-12-08 17:58:32 +08:00
|
|
|
if (ret)
|
|
|
|
detach_page_private(page);
|
2018-07-26 20:22:07 +08:00
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
/* page_type must be Z_EROFS_PAGE_TYPE_EXCLUSIVE */
|
2022-03-02 03:49:50 +08:00
|
|
|
static bool z_erofs_try_inplace_io(struct z_erofs_decompress_frontend *fe,
|
2021-04-07 12:39:21 +08:00
|
|
|
struct page *page)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2022-03-02 03:49:50 +08:00
|
|
|
struct z_erofs_pcluster *const pcl = fe->pcl;
|
2019-07-31 23:57:47 +08:00
|
|
|
|
2022-03-02 03:49:50 +08:00
|
|
|
while (fe->icpage_ptr > pcl->compressed_pages)
|
|
|
|
if (!cmpxchg(--fe->icpage_ptr, NULL, page))
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
return true;
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
/* callers must be with collection lock held */
|
2022-03-02 03:49:50 +08:00
|
|
|
static int z_erofs_attach_page(struct z_erofs_decompress_frontend *fe,
|
2021-11-04 02:20:06 +08:00
|
|
|
struct page *page, enum z_erofs_page_type type,
|
|
|
|
bool pvec_safereuse)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
/* give priority for inplaceio */
|
2022-03-02 03:49:50 +08:00
|
|
|
if (fe->mode >= COLLECT_PRIMARY &&
|
2019-03-19 07:58:41 +08:00
|
|
|
type == Z_EROFS_PAGE_TYPE_EXCLUSIVE &&
|
2022-03-02 03:49:50 +08:00
|
|
|
z_erofs_try_inplace_io(fe, page))
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
return 0;
|
|
|
|
|
2022-03-02 03:49:50 +08:00
|
|
|
ret = z_erofs_pagevec_enqueue(&fe->vector, page, type,
|
2021-11-04 02:20:06 +08:00
|
|
|
pvec_safereuse);
|
2022-03-02 03:49:50 +08:00
|
|
|
fe->cl->vcnt += (unsigned int)ret;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
return ret ? 0 : -EAGAIN;
|
|
|
|
}
|
|
|
|
|
2022-03-02 03:49:50 +08:00
|
|
|
static void z_erofs_try_to_claim_pcluster(struct z_erofs_decompress_frontend *f)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2022-03-02 03:49:50 +08:00
|
|
|
struct z_erofs_pcluster *pcl = f->pcl;
|
|
|
|
z_erofs_next_pcluster_t *owned_head = &f->owned_head;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2020-12-08 17:58:34 +08:00
|
|
|
/* type 1, nil pcluster (this pcluster doesn't belong to any chain.) */
|
|
|
|
if (cmpxchg(&pcl->next, Z_EROFS_PCLUSTER_NIL,
|
|
|
|
*owned_head) == Z_EROFS_PCLUSTER_NIL) {
|
2019-07-31 23:57:47 +08:00
|
|
|
*owned_head = &pcl->next;
|
2020-12-08 17:58:34 +08:00
|
|
|
/* so we can attach this pcluster to our submission chain. */
|
2022-03-02 03:49:50 +08:00
|
|
|
f->mode = COLLECT_PRIMARY_FOLLOWED;
|
2020-12-08 17:58:34 +08:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* type 2, link to the end of an existing open chain, be careful
|
|
|
|
* that its submission is controlled by the original attached chain.
|
|
|
|
*/
|
|
|
|
if (cmpxchg(&pcl->next, Z_EROFS_PCLUSTER_TAIL,
|
|
|
|
*owned_head) == Z_EROFS_PCLUSTER_TAIL) {
|
2019-07-31 23:57:47 +08:00
|
|
|
*owned_head = Z_EROFS_PCLUSTER_TAIL;
|
2022-03-02 03:49:50 +08:00
|
|
|
f->mode = COLLECT_PRIMARY_HOOKED;
|
|
|
|
f->tailpcl = NULL;
|
2020-12-08 17:58:34 +08:00
|
|
|
return;
|
2019-02-27 13:33:32 +08:00
|
|
|
}
|
2020-12-08 17:58:34 +08:00
|
|
|
/* type 3, it belongs to a chain, but it isn't the end of the chain */
|
2022-03-02 03:49:50 +08:00
|
|
|
f->mode = COLLECT_PRIMARY;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2022-03-02 03:49:50 +08:00
|
|
|
static int z_erofs_lookup_collection(struct z_erofs_decompress_frontend *fe,
|
2019-10-08 20:56:12 +08:00
|
|
|
struct inode *inode,
|
|
|
|
struct erofs_map_blocks *map)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2022-03-02 03:49:50 +08:00
|
|
|
struct z_erofs_pcluster *pcl = fe->pcl;
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_collection *cl;
|
|
|
|
unsigned int length;
|
|
|
|
|
2020-02-20 10:46:42 +08:00
|
|
|
/* to avoid unexpected loop formed by corrupted images */
|
2022-03-02 03:49:50 +08:00
|
|
|
if (fe->owned_head == &pcl->next || pcl == fe->tailpcl) {
|
2019-08-21 11:09:08 +08:00
|
|
|
DBG_BUGON(1);
|
2019-10-08 20:56:12 +08:00
|
|
|
return -EFSCORRUPTED;
|
2019-08-21 11:09:08 +08:00
|
|
|
}
|
2019-07-31 23:57:47 +08:00
|
|
|
|
|
|
|
cl = z_erofs_primarycollection(pcl);
|
2019-08-30 00:38:27 +08:00
|
|
|
if (cl->pageofs != (map->m_la & ~PAGE_MASK)) {
|
2019-07-31 23:57:47 +08:00
|
|
|
DBG_BUGON(1);
|
2019-10-08 20:56:12 +08:00
|
|
|
return -EFSCORRUPTED;
|
2019-07-31 23:57:47 +08:00
|
|
|
}
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
length = READ_ONCE(pcl->length);
|
|
|
|
if (length & Z_EROFS_PCLUSTER_FULL_LENGTH) {
|
|
|
|
if ((map->m_llen << Z_EROFS_PCLUSTER_LENGTH_BIT) > length) {
|
|
|
|
DBG_BUGON(1);
|
2019-10-08 20:56:12 +08:00
|
|
|
return -EFSCORRUPTED;
|
2019-07-31 23:57:47 +08:00
|
|
|
}
|
|
|
|
} else {
|
|
|
|
unsigned int llen = map->m_llen << Z_EROFS_PCLUSTER_LENGTH_BIT;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
if (map->m_flags & EROFS_MAP_FULL_MAPPED)
|
|
|
|
llen |= Z_EROFS_PCLUSTER_FULL_LENGTH;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
while (llen > length &&
|
|
|
|
length != cmpxchg_relaxed(&pcl->length, length, llen)) {
|
|
|
|
cpu_relax();
|
|
|
|
length = READ_ONCE(pcl->length);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
mutex_lock(&cl->lock);
|
2019-08-21 11:09:08 +08:00
|
|
|
/* used to check tail merging loop due to corrupted images */
|
2022-03-02 03:49:50 +08:00
|
|
|
if (fe->owned_head == Z_EROFS_PCLUSTER_TAIL)
|
|
|
|
fe->tailpcl = pcl;
|
2020-12-08 17:58:34 +08:00
|
|
|
|
2022-03-02 03:49:50 +08:00
|
|
|
z_erofs_try_to_claim_pcluster(fe);
|
|
|
|
fe->cl = cl;
|
2019-10-08 20:56:12 +08:00
|
|
|
return 0;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2022-03-02 03:49:50 +08:00
|
|
|
static int z_erofs_register_collection(struct z_erofs_decompress_frontend *fe,
|
2019-10-08 20:56:12 +08:00
|
|
|
struct inode *inode,
|
|
|
|
struct erofs_map_blocks *map)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2021-12-29 07:29:19 +08:00
|
|
|
bool ztailpacking = map->m_flags & EROFS_MAP_META;
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_pcluster *pcl;
|
|
|
|
struct z_erofs_collection *cl;
|
2020-02-20 10:46:42 +08:00
|
|
|
struct erofs_workgroup *grp;
|
2019-07-31 23:57:47 +08:00
|
|
|
int err;
|
2018-09-19 13:49:07 +08:00
|
|
|
|
2021-10-09 04:08:37 +08:00
|
|
|
if (!(map->m_flags & EROFS_MAP_ENCODED)) {
|
|
|
|
DBG_BUGON(1);
|
|
|
|
return -EFSCORRUPTED;
|
|
|
|
}
|
|
|
|
|
2021-04-07 12:39:20 +08:00
|
|
|
/* no available pcluster, let's allocate one */
|
2021-12-29 07:29:19 +08:00
|
|
|
pcl = z_erofs_alloc_pcluster(ztailpacking ? 1 :
|
|
|
|
map->m_plen >> PAGE_SHIFT);
|
2021-04-07 12:39:20 +08:00
|
|
|
if (IS_ERR(pcl))
|
|
|
|
return PTR_ERR(pcl);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2020-02-20 10:46:42 +08:00
|
|
|
atomic_set(&pcl->obj.refcount, 1);
|
2021-10-09 04:08:37 +08:00
|
|
|
pcl->algorithmformat = map->m_algorithmformat;
|
2019-07-31 23:57:47 +08:00
|
|
|
pcl->length = (map->m_llen << Z_EROFS_PCLUSTER_LENGTH_BIT) |
|
|
|
|
(map->m_flags & EROFS_MAP_FULL_MAPPED ?
|
|
|
|
Z_EROFS_PCLUSTER_FULL_LENGTH : 0);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
/* new pclusters should be claimed as type 1, primary and followed */
|
2022-03-02 03:49:50 +08:00
|
|
|
pcl->next = fe->owned_head;
|
|
|
|
fe->mode = COLLECT_PRIMARY_FOLLOWED;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
cl = z_erofs_primarycollection(pcl);
|
|
|
|
cl->pageofs = map->m_la & ~PAGE_MASK;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2018-11-23 01:21:47 +08:00
|
|
|
/*
|
|
|
|
* lock all primary followed works before visible to others
|
2019-07-31 23:57:47 +08:00
|
|
|
* and mutex_trylock *never* fails for a new pcluster.
|
2018-11-23 01:21:47 +08:00
|
|
|
*/
|
2021-04-07 12:39:20 +08:00
|
|
|
mutex_init(&cl->lock);
|
2020-02-20 10:46:42 +08:00
|
|
|
DBG_BUGON(!mutex_trylock(&cl->lock));
|
|
|
|
|
2021-12-29 07:29:19 +08:00
|
|
|
if (ztailpacking) {
|
|
|
|
pcl->obj.index = 0; /* which indicates ztailpacking */
|
|
|
|
pcl->pageofs_in = erofs_blkoff(map->m_pa);
|
|
|
|
pcl->tailpacking_size = map->m_plen;
|
|
|
|
} else {
|
|
|
|
pcl->obj.index = map->m_pa >> PAGE_SHIFT;
|
2018-11-23 01:21:47 +08:00
|
|
|
|
2021-12-29 07:29:19 +08:00
|
|
|
grp = erofs_insert_workgroup(inode->i_sb, &pcl->obj);
|
|
|
|
if (IS_ERR(grp)) {
|
|
|
|
err = PTR_ERR(grp);
|
|
|
|
goto err_out;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (grp != &pcl->obj) {
|
2022-03-02 03:49:50 +08:00
|
|
|
fe->pcl = container_of(grp,
|
2021-12-29 07:29:19 +08:00
|
|
|
struct z_erofs_pcluster, obj);
|
|
|
|
err = -EEXIST;
|
|
|
|
goto err_out;
|
|
|
|
}
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
2019-08-21 11:09:08 +08:00
|
|
|
/* used to check tail merging loop due to corrupted images */
|
2022-03-02 03:49:50 +08:00
|
|
|
if (fe->owned_head == Z_EROFS_PCLUSTER_TAIL)
|
|
|
|
fe->tailpcl = pcl;
|
|
|
|
fe->owned_head = &pcl->next;
|
|
|
|
fe->pcl = pcl;
|
|
|
|
fe->cl = cl;
|
2019-10-08 20:56:12 +08:00
|
|
|
return 0;
|
2020-02-20 10:46:42 +08:00
|
|
|
|
|
|
|
err_out:
|
|
|
|
mutex_unlock(&cl->lock);
|
2021-04-07 12:39:20 +08:00
|
|
|
z_erofs_free_pcluster(pcl);
|
2020-02-20 10:46:42 +08:00
|
|
|
return err;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2022-03-02 03:49:50 +08:00
|
|
|
static int z_erofs_collector_begin(struct z_erofs_decompress_frontend *fe,
|
2019-07-31 23:57:47 +08:00
|
|
|
struct inode *inode,
|
|
|
|
struct erofs_map_blocks *map)
|
|
|
|
{
|
2020-02-20 10:46:42 +08:00
|
|
|
struct erofs_workgroup *grp;
|
2019-10-08 20:56:12 +08:00
|
|
|
int ret;
|
2019-02-27 13:33:32 +08:00
|
|
|
|
2022-03-02 03:49:50 +08:00
|
|
|
DBG_BUGON(fe->cl);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
/* must be Z_EROFS_PCLUSTER_TAIL or pointed to previous collection */
|
2022-03-02 03:49:50 +08:00
|
|
|
DBG_BUGON(fe->owned_head == Z_EROFS_PCLUSTER_NIL);
|
|
|
|
DBG_BUGON(fe->owned_head == Z_EROFS_PCLUSTER_TAIL_CLOSED);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2021-12-29 07:29:19 +08:00
|
|
|
if (map->m_flags & EROFS_MAP_META) {
|
|
|
|
if ((map->m_pa & ~PAGE_MASK) + map->m_plen > PAGE_SIZE) {
|
|
|
|
DBG_BUGON(1);
|
|
|
|
return -EFSCORRUPTED;
|
|
|
|
}
|
|
|
|
goto tailpacking;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2020-02-20 10:46:42 +08:00
|
|
|
grp = erofs_find_workgroup(inode->i_sb, map->m_pa >> PAGE_SHIFT);
|
|
|
|
if (grp) {
|
2022-03-02 03:49:50 +08:00
|
|
|
fe->pcl = container_of(grp, struct z_erofs_pcluster, obj);
|
2020-02-20 10:46:42 +08:00
|
|
|
} else {
|
2021-12-29 07:29:19 +08:00
|
|
|
tailpacking:
|
2022-03-02 03:49:50 +08:00
|
|
|
ret = z_erofs_register_collection(fe, inode, map);
|
2020-02-20 10:46:42 +08:00
|
|
|
if (!ret)
|
|
|
|
goto out;
|
|
|
|
if (ret != -EEXIST)
|
|
|
|
return ret;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2022-03-02 03:49:50 +08:00
|
|
|
ret = z_erofs_lookup_collection(fe, inode, map);
|
2020-02-20 10:46:42 +08:00
|
|
|
if (ret) {
|
2022-03-02 03:49:50 +08:00
|
|
|
erofs_workgroup_put(&fe->pcl->obj);
|
2019-10-08 20:56:12 +08:00
|
|
|
return ret;
|
2020-02-20 10:46:42 +08:00
|
|
|
}
|
2019-07-31 23:57:47 +08:00
|
|
|
|
2020-02-20 10:46:42 +08:00
|
|
|
out:
|
2022-03-02 03:49:50 +08:00
|
|
|
z_erofs_pagevec_ctor_init(&fe->vector, Z_EROFS_NR_INLINE_PAGEVECS,
|
|
|
|
fe->cl->pagevec, fe->cl->vcnt);
|
2021-04-07 12:39:21 +08:00
|
|
|
/* since file-backed online pages are traversed in reverse order */
|
2022-03-02 03:49:50 +08:00
|
|
|
fe->icpage_ptr = fe->pcl->compressed_pages +
|
|
|
|
z_erofs_pclusterpages(fe->pcl);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2019-07-31 23:57:47 +08:00
|
|
|
* keep in mind that no referenced pclusters will be freed
|
|
|
|
* only after a RCU grace period.
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
*/
|
|
|
|
static void z_erofs_rcu_callback(struct rcu_head *head)
|
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_collection *const cl =
|
|
|
|
container_of(head, struct z_erofs_collection, rcu);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2021-04-07 12:39:20 +08:00
|
|
|
z_erofs_free_pcluster(container_of(cl, struct z_erofs_pcluster,
|
|
|
|
primary_collection));
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
void erofs_workgroup_free_rcu(struct erofs_workgroup *grp)
|
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_pcluster *const pcl =
|
|
|
|
container_of(grp, struct z_erofs_pcluster, obj);
|
|
|
|
struct z_erofs_collection *const cl = z_erofs_primarycollection(pcl);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
call_rcu(&cl->rcu, z_erofs_rcu_callback);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
static void z_erofs_collection_put(struct z_erofs_collection *cl)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_pcluster *const pcl =
|
|
|
|
container_of(cl, struct z_erofs_pcluster, primary_collection);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
erofs_workgroup_put(&pcl->obj);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2022-03-02 03:49:50 +08:00
|
|
|
static bool z_erofs_collector_end(struct z_erofs_decompress_frontend *fe)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2022-03-02 03:49:50 +08:00
|
|
|
struct z_erofs_collection *cl = fe->cl;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
if (!cl)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
return false;
|
|
|
|
|
2022-03-02 03:49:50 +08:00
|
|
|
z_erofs_pagevec_ctor_exit(&fe->vector, false);
|
2019-07-31 23:57:47 +08:00
|
|
|
mutex_unlock(&cl->lock);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/*
|
2019-07-31 23:57:47 +08:00
|
|
|
* if all pending pages are added, don't hold its reference
|
|
|
|
* any longer if the pcluster isn't hosted by ourselves.
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
*/
|
2022-03-02 03:49:50 +08:00
|
|
|
if (fe->mode < COLLECT_PRIMARY_FOLLOWED_NOINPLACE)
|
2019-07-31 23:57:47 +08:00
|
|
|
z_erofs_collection_put(cl);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2022-03-02 03:49:50 +08:00
|
|
|
fe->cl = NULL;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
static bool should_alloc_managed_pages(struct z_erofs_decompress_frontend *fe,
|
2019-07-31 23:57:49 +08:00
|
|
|
unsigned int cachestrategy,
|
2019-07-31 23:57:47 +08:00
|
|
|
erofs_off_t la)
|
2018-12-08 00:19:16 +08:00
|
|
|
{
|
2019-07-31 23:57:49 +08:00
|
|
|
if (cachestrategy <= EROFS_ZIP_CACHE_DISABLED)
|
|
|
|
return false;
|
|
|
|
|
2018-12-08 00:19:16 +08:00
|
|
|
if (fe->backmost)
|
|
|
|
return true;
|
|
|
|
|
2019-07-31 23:57:49 +08:00
|
|
|
return cachestrategy >= EROFS_ZIP_CACHE_READAROUND &&
|
|
|
|
la < fe->headoffset;
|
2018-12-08 00:19:16 +08:00
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
static int z_erofs_do_read_page(struct z_erofs_decompress_frontend *fe,
|
2021-10-22 17:01:20 +08:00
|
|
|
struct page *page, struct page **pagepool)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
struct inode *const inode = fe->inode;
|
2019-10-08 20:56:13 +08:00
|
|
|
struct erofs_sb_info *const sbi = EROFS_I_SB(inode);
|
2019-01-15 09:42:21 +08:00
|
|
|
struct erofs_map_blocks *const map = &fe->map;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
const loff_t offset = page_offset(page);
|
2019-09-22 18:04:34 +08:00
|
|
|
bool tight = true;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2018-12-08 00:19:16 +08:00
|
|
|
enum z_erofs_cache_alloctype cache_strategy;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
enum z_erofs_page_type page_type;
|
2018-09-11 03:41:14 +08:00
|
|
|
unsigned int cur, end, spiltted, index;
|
2018-09-18 22:27:25 +08:00
|
|
|
int err = 0;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/* register locked file pages as online pages in pack */
|
|
|
|
z_erofs_onlinepage_init(page);
|
|
|
|
|
|
|
|
spiltted = 0;
|
|
|
|
end = PAGE_SIZE;
|
|
|
|
repeat:
|
|
|
|
cur = end - 1;
|
|
|
|
|
|
|
|
/* lucky, within the range of the current map_blocks */
|
|
|
|
if (offset + cur >= map->m_la &&
|
2019-03-19 07:58:41 +08:00
|
|
|
offset + cur < map->m_la + map->m_llen) {
|
2019-07-31 23:57:47 +08:00
|
|
|
/* didn't get a valid collection previously (very rare) */
|
2022-03-02 03:49:50 +08:00
|
|
|
if (!fe->cl)
|
staging: erofs: fix illegal address access under memory pressure
Considering a read request with two decompressed file pages,
If a decompression work cannot be started on the previous page
due to memory pressure but in-memory LTP map lookup is done,
builder->work should be still NULL.
Moreover, if the current page also belongs to the same map,
it won't try to start the decompression work again and then
run into trouble.
This patch aims to solve the above issue only with little changes
as much as possible in order to make the fix backport easier.
kernel message is:
<4>[1051408.015930s]SLUB: Unable to allocate memory on node -1, gfp=0x2408040(GFP_NOFS|__GFP_ZERO)
<4>[1051408.015930s] cache: erofs_compress, object size: 144, buffer size: 144, default order: 0, min order: 0
<4>[1051408.015930s] node 0: slabs: 98, objs: 2744, free: 0
* Cannot allocate the decompression work
<3>[1051408.015960s]erofs: z_erofs_vle_normalaccess_readpages, readahead error at page 1008 of nid 5391488
* Note that the previous page was failed to read
<0>[1051408.015960s]Internal error: Accessing user space memory outside uaccess.h routines: 96000005 [#1] PREEMPT SMP
...
<4>[1051408.015991s]Hardware name: kirin710 (DT)
...
<4>[1051408.016021s]PC is at z_erofs_vle_work_add_page+0xa0/0x17c
<4>[1051408.016021s]LR is at z_erofs_do_read_page+0x12c/0xcf0
...
<4>[1051408.018096s][<ffffff80c6fb0fd4>] z_erofs_vle_work_add_page+0xa0/0x17c
<4>[1051408.018096s][<ffffff80c6fb3814>] z_erofs_vle_normalaccess_readpages+0x1a0/0x37c
<4>[1051408.018096s][<ffffff80c6d670b8>] read_pages+0x70/0x190
<4>[1051408.018127s][<ffffff80c6d6736c>] __do_page_cache_readahead+0x194/0x1a8
<4>[1051408.018127s][<ffffff80c6d59318>] filemap_fault+0x398/0x684
<4>[1051408.018127s][<ffffff80c6d8a9e0>] __do_fault+0x8c/0x138
<4>[1051408.018127s][<ffffff80c6d8f90c>] handle_pte_fault+0x730/0xb7c
<4>[1051408.018127s][<ffffff80c6d8fe04>] __handle_mm_fault+0xac/0xf4
<4>[1051408.018157s][<ffffff80c6d8fec8>] handle_mm_fault+0x7c/0x118
<4>[1051408.018157s][<ffffff80c8c52998>] do_page_fault+0x354/0x474
<4>[1051408.018157s][<ffffff80c8c52af8>] do_translation_fault+0x40/0x48
<4>[1051408.018157s][<ffffff80c6c002f4>] do_mem_abort+0x80/0x100
<4>[1051408.018310s]---[ end trace 9f4009a3283bd78b ]---
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27 13:33:31 +08:00
|
|
|
goto restart_now;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
goto hitted;
|
staging: erofs: fix illegal address access under memory pressure
Considering a read request with two decompressed file pages,
If a decompression work cannot be started on the previous page
due to memory pressure but in-memory LTP map lookup is done,
builder->work should be still NULL.
Moreover, if the current page also belongs to the same map,
it won't try to start the decompression work again and then
run into trouble.
This patch aims to solve the above issue only with little changes
as much as possible in order to make the fix backport easier.
kernel message is:
<4>[1051408.015930s]SLUB: Unable to allocate memory on node -1, gfp=0x2408040(GFP_NOFS|__GFP_ZERO)
<4>[1051408.015930s] cache: erofs_compress, object size: 144, buffer size: 144, default order: 0, min order: 0
<4>[1051408.015930s] node 0: slabs: 98, objs: 2744, free: 0
* Cannot allocate the decompression work
<3>[1051408.015960s]erofs: z_erofs_vle_normalaccess_readpages, readahead error at page 1008 of nid 5391488
* Note that the previous page was failed to read
<0>[1051408.015960s]Internal error: Accessing user space memory outside uaccess.h routines: 96000005 [#1] PREEMPT SMP
...
<4>[1051408.015991s]Hardware name: kirin710 (DT)
...
<4>[1051408.016021s]PC is at z_erofs_vle_work_add_page+0xa0/0x17c
<4>[1051408.016021s]LR is at z_erofs_do_read_page+0x12c/0xcf0
...
<4>[1051408.018096s][<ffffff80c6fb0fd4>] z_erofs_vle_work_add_page+0xa0/0x17c
<4>[1051408.018096s][<ffffff80c6fb3814>] z_erofs_vle_normalaccess_readpages+0x1a0/0x37c
<4>[1051408.018096s][<ffffff80c6d670b8>] read_pages+0x70/0x190
<4>[1051408.018127s][<ffffff80c6d6736c>] __do_page_cache_readahead+0x194/0x1a8
<4>[1051408.018127s][<ffffff80c6d59318>] filemap_fault+0x398/0x684
<4>[1051408.018127s][<ffffff80c6d8a9e0>] __do_fault+0x8c/0x138
<4>[1051408.018127s][<ffffff80c6d8f90c>] handle_pte_fault+0x730/0xb7c
<4>[1051408.018127s][<ffffff80c6d8fe04>] __handle_mm_fault+0xac/0xf4
<4>[1051408.018157s][<ffffff80c6d8fec8>] handle_mm_fault+0x7c/0x118
<4>[1051408.018157s][<ffffff80c8c52998>] do_page_fault+0x354/0x474
<4>[1051408.018157s][<ffffff80c8c52af8>] do_translation_fault+0x40/0x48
<4>[1051408.018157s][<ffffff80c6c002f4>] do_mem_abort+0x80/0x100
<4>[1051408.018310s]---[ end trace 9f4009a3283bd78b ]---
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27 13:33:31 +08:00
|
|
|
}
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/* go ahead the next map_blocks */
|
2019-09-04 10:09:09 +08:00
|
|
|
erofs_dbg("%s: [out-of-range] pos %llu", __func__, offset + cur);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2022-03-02 03:49:50 +08:00
|
|
|
if (z_erofs_collector_end(fe))
|
2018-11-23 01:21:49 +08:00
|
|
|
fe->backmost = false;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
map->m_la = offset + cur;
|
|
|
|
map->m_llen = 0;
|
2019-07-31 23:57:47 +08:00
|
|
|
err = z_erofs_map_blocks_iter(inode, map, 0);
|
2019-08-30 00:38:27 +08:00
|
|
|
if (err)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
goto err_out;
|
|
|
|
|
staging: erofs: fix illegal address access under memory pressure
Considering a read request with two decompressed file pages,
If a decompression work cannot be started on the previous page
due to memory pressure but in-memory LTP map lookup is done,
builder->work should be still NULL.
Moreover, if the current page also belongs to the same map,
it won't try to start the decompression work again and then
run into trouble.
This patch aims to solve the above issue only with little changes
as much as possible in order to make the fix backport easier.
kernel message is:
<4>[1051408.015930s]SLUB: Unable to allocate memory on node -1, gfp=0x2408040(GFP_NOFS|__GFP_ZERO)
<4>[1051408.015930s] cache: erofs_compress, object size: 144, buffer size: 144, default order: 0, min order: 0
<4>[1051408.015930s] node 0: slabs: 98, objs: 2744, free: 0
* Cannot allocate the decompression work
<3>[1051408.015960s]erofs: z_erofs_vle_normalaccess_readpages, readahead error at page 1008 of nid 5391488
* Note that the previous page was failed to read
<0>[1051408.015960s]Internal error: Accessing user space memory outside uaccess.h routines: 96000005 [#1] PREEMPT SMP
...
<4>[1051408.015991s]Hardware name: kirin710 (DT)
...
<4>[1051408.016021s]PC is at z_erofs_vle_work_add_page+0xa0/0x17c
<4>[1051408.016021s]LR is at z_erofs_do_read_page+0x12c/0xcf0
...
<4>[1051408.018096s][<ffffff80c6fb0fd4>] z_erofs_vle_work_add_page+0xa0/0x17c
<4>[1051408.018096s][<ffffff80c6fb3814>] z_erofs_vle_normalaccess_readpages+0x1a0/0x37c
<4>[1051408.018096s][<ffffff80c6d670b8>] read_pages+0x70/0x190
<4>[1051408.018127s][<ffffff80c6d6736c>] __do_page_cache_readahead+0x194/0x1a8
<4>[1051408.018127s][<ffffff80c6d59318>] filemap_fault+0x398/0x684
<4>[1051408.018127s][<ffffff80c6d8a9e0>] __do_fault+0x8c/0x138
<4>[1051408.018127s][<ffffff80c6d8f90c>] handle_pte_fault+0x730/0xb7c
<4>[1051408.018127s][<ffffff80c6d8fe04>] __handle_mm_fault+0xac/0xf4
<4>[1051408.018157s][<ffffff80c6d8fec8>] handle_mm_fault+0x7c/0x118
<4>[1051408.018157s][<ffffff80c8c52998>] do_page_fault+0x354/0x474
<4>[1051408.018157s][<ffffff80c8c52af8>] do_translation_fault+0x40/0x48
<4>[1051408.018157s][<ffffff80c6c002f4>] do_mem_abort+0x80/0x100
<4>[1051408.018310s]---[ end trace 9f4009a3283bd78b ]---
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27 13:33:31 +08:00
|
|
|
restart_now:
|
2019-08-30 00:38:27 +08:00
|
|
|
if (!(map->m_flags & EROFS_MAP_MAPPED))
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
goto hitted;
|
|
|
|
|
2022-03-02 03:49:50 +08:00
|
|
|
err = z_erofs_collector_begin(fe, inode, map);
|
2019-08-30 00:38:27 +08:00
|
|
|
if (err)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
goto err_out;
|
|
|
|
|
2022-03-02 03:49:50 +08:00
|
|
|
if (z_erofs_is_inline_pcluster(fe->pcl)) {
|
2022-01-02 12:00:17 +08:00
|
|
|
void *mp;
|
2021-12-29 07:29:19 +08:00
|
|
|
|
2022-01-02 12:00:17 +08:00
|
|
|
mp = erofs_read_metabuf(&fe->map.buf, inode->i_sb,
|
|
|
|
erofs_blknr(map->m_pa), EROFS_NO_KMAP);
|
|
|
|
if (IS_ERR(mp)) {
|
|
|
|
err = PTR_ERR(mp);
|
2021-12-29 07:29:19 +08:00
|
|
|
erofs_err(inode->i_sb,
|
|
|
|
"failed to get inline page, err %d", err);
|
|
|
|
goto err_out;
|
|
|
|
}
|
2022-01-02 12:00:17 +08:00
|
|
|
get_page(fe->map.buf.page);
|
2022-03-02 03:49:50 +08:00
|
|
|
WRITE_ONCE(fe->pcl->compressed_pages[0], fe->map.buf.page);
|
|
|
|
fe->mode = COLLECT_PRIMARY_FOLLOWED_NOINPLACE;
|
2021-12-29 07:29:19 +08:00
|
|
|
} else {
|
2022-03-02 03:49:51 +08:00
|
|
|
/* bind cache first when cached decompression is preferred */
|
2021-12-29 07:29:19 +08:00
|
|
|
if (should_alloc_managed_pages(fe, sbi->opt.cache_strategy,
|
|
|
|
map->m_la))
|
|
|
|
cache_strategy = TRYALLOC;
|
|
|
|
else
|
|
|
|
cache_strategy = DONTALLOC;
|
2018-12-08 00:19:16 +08:00
|
|
|
|
2022-03-02 03:49:51 +08:00
|
|
|
z_erofs_bind_cache(fe, cache_strategy, pagepool);
|
2021-12-29 07:29:19 +08:00
|
|
|
}
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
hitted:
|
2019-09-22 18:04:34 +08:00
|
|
|
/*
|
|
|
|
* Ensure the current partial page belongs to this submit chain rather
|
|
|
|
* than other concurrent submit chains or the noio(bypass) chain since
|
|
|
|
* those chains are handled asynchronously thus the page cannot be used
|
|
|
|
* for inplace I/O or pagevec (should be processed in strict order.)
|
|
|
|
*/
|
2022-03-02 03:49:50 +08:00
|
|
|
tight &= (fe->mode >= COLLECT_PRIMARY_HOOKED &&
|
|
|
|
fe->mode != COLLECT_PRIMARY_FOLLOWED_NOINPLACE);
|
2019-09-22 18:04:34 +08:00
|
|
|
|
2018-09-11 03:41:14 +08:00
|
|
|
cur = end - min_t(unsigned int, offset + end - map->m_la, end);
|
2019-08-30 00:38:27 +08:00
|
|
|
if (!(map->m_flags & EROFS_MAP_MAPPED)) {
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
zero_user_segment(page, cur, end);
|
|
|
|
goto next_part;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* let's derive page type */
|
|
|
|
page_type = cur ? Z_EROFS_VLE_PAGE_TYPE_HEAD :
|
|
|
|
(!spiltted ? Z_EROFS_PAGE_TYPE_EXCLUSIVE :
|
|
|
|
(tight ? Z_EROFS_PAGE_TYPE_EXCLUSIVE :
|
|
|
|
Z_EROFS_VLE_PAGE_TYPE_TAIL_SHARED));
|
|
|
|
|
2019-02-27 13:33:32 +08:00
|
|
|
if (cur)
|
2022-03-02 03:49:50 +08:00
|
|
|
tight &= (fe->mode >= COLLECT_PRIMARY_FOLLOWED);
|
2019-02-27 13:33:32 +08:00
|
|
|
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
retry:
|
2022-03-02 03:49:50 +08:00
|
|
|
err = z_erofs_attach_page(fe, page, page_type,
|
|
|
|
fe->mode >= COLLECT_PRIMARY_FOLLOWED);
|
2020-12-08 17:58:32 +08:00
|
|
|
/* should allocate an additional short-lived page for pagevec */
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
if (err == -EAGAIN) {
|
|
|
|
struct page *const newpage =
|
2020-09-17 09:18:21 +08:00
|
|
|
alloc_page(GFP_NOFS | __GFP_NOFAIL);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2020-12-08 17:58:32 +08:00
|
|
|
set_page_private(newpage, Z_EROFS_SHORTLIVED_PAGE);
|
2022-03-02 03:49:50 +08:00
|
|
|
err = z_erofs_attach_page(fe, newpage,
|
2021-11-04 02:20:06 +08:00
|
|
|
Z_EROFS_PAGE_TYPE_EXCLUSIVE, true);
|
2019-08-30 00:38:27 +08:00
|
|
|
if (!err)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
goto retry;
|
|
|
|
}
|
|
|
|
|
2019-08-30 00:38:27 +08:00
|
|
|
if (err)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
goto err_out;
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
index = page->index - (map->m_la >> PAGE_SHIFT);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
z_erofs_onlinepage_fixup(page, index, true);
|
|
|
|
|
2018-09-18 22:27:25 +08:00
|
|
|
/* bump up the number of spiltted parts of a page */
|
|
|
|
++spiltted;
|
|
|
|
/* also update nr_pages */
|
2022-03-02 03:49:50 +08:00
|
|
|
fe->cl->nr_pages = max_t(pgoff_t, fe->cl->nr_pages, index + 1);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
next_part:
|
|
|
|
/* can be used for verification */
|
|
|
|
map->m_llen = offset + cur - map->m_la;
|
|
|
|
|
2018-08-05 23:21:01 +08:00
|
|
|
end = cur;
|
|
|
|
if (end > 0)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
goto repeat;
|
|
|
|
|
2018-09-18 22:27:25 +08:00
|
|
|
out:
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
z_erofs_onlinepage_endio(page);
|
|
|
|
|
2019-09-04 10:09:09 +08:00
|
|
|
erofs_dbg("%s, finish page: %pK spiltted: %u map->m_llen %llu",
|
|
|
|
__func__, page, spiltted, map->m_llen);
|
2018-09-18 22:27:25 +08:00
|
|
|
return err;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2018-09-18 22:27:25 +08:00
|
|
|
/* if some error occurred while processing this page */
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
err_out:
|
2018-09-18 22:27:25 +08:00
|
|
|
SetPageError(page);
|
|
|
|
goto out;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2021-12-06 22:35:52 +08:00
|
|
|
static bool z_erofs_get_sync_decompress_policy(struct erofs_sb_info *sbi,
|
|
|
|
unsigned int readahead_pages)
|
|
|
|
{
|
|
|
|
/* auto: enable for readpage, disable for readahead */
|
|
|
|
if ((sbi->opt.sync_decompress == EROFS_SYNC_DECOMPRESS_AUTO) &&
|
|
|
|
!readahead_pages)
|
|
|
|
return true;
|
|
|
|
|
|
|
|
if ((sbi->opt.sync_decompress == EROFS_SYNC_DECOMPRESS_FORCE_ON) &&
|
|
|
|
(readahead_pages <= sbi->opt.max_sync_decompress_pages))
|
|
|
|
return true;
|
|
|
|
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2020-12-08 17:58:32 +08:00
|
|
|
static bool z_erofs_page_is_invalidated(struct page *page)
|
|
|
|
{
|
|
|
|
return !page->mapping && !z_erofs_is_shortlived_page(page);
|
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
static int z_erofs_decompress_pcluster(struct super_block *sb,
|
|
|
|
struct z_erofs_pcluster *pcl,
|
2021-10-22 17:01:20 +08:00
|
|
|
struct page **pagepool)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
|
|
|
struct erofs_sb_info *const sbi = EROFS_SB(sb);
|
2021-12-29 07:29:19 +08:00
|
|
|
unsigned int pclusterpages = z_erofs_pclusterpages(pcl);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
struct z_erofs_pagevec_ctor ctor;
|
2021-04-07 12:39:20 +08:00
|
|
|
unsigned int i, inputsize, outputsize, llen, nr_pages;
|
2019-07-31 23:57:47 +08:00
|
|
|
struct page *pages_onstack[Z_EROFS_VMAP_ONSTACK_PAGES];
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
struct page **pages, **compressed_pages, *page;
|
|
|
|
|
|
|
|
enum z_erofs_page_type page_type;
|
2019-06-24 15:22:58 +08:00
|
|
|
bool overlapped, partial;
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_collection *cl;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
int err;
|
|
|
|
|
|
|
|
might_sleep();
|
2019-07-31 23:57:47 +08:00
|
|
|
cl = z_erofs_primarycollection(pcl);
|
|
|
|
DBG_BUGON(!READ_ONCE(cl->nr_pages));
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
mutex_lock(&cl->lock);
|
|
|
|
nr_pages = cl->nr_pages;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-08-30 00:38:27 +08:00
|
|
|
if (nr_pages <= Z_EROFS_VMAP_ONSTACK_PAGES) {
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
pages = pages_onstack;
|
2019-07-31 23:57:47 +08:00
|
|
|
} else if (nr_pages <= Z_EROFS_VMAP_GLOBAL_PAGES &&
|
|
|
|
mutex_trylock(&z_pagemap_global_lock)) {
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
pages = z_pagemap_global;
|
2019-07-31 23:57:47 +08:00
|
|
|
} else {
|
2019-07-16 17:44:22 +08:00
|
|
|
gfp_t gfp_flags = GFP_KERNEL;
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
if (nr_pages > Z_EROFS_VMAP_GLOBAL_PAGES)
|
2019-07-16 17:44:22 +08:00
|
|
|
gfp_flags |= __GFP_NOFAIL;
|
|
|
|
|
2019-03-19 07:58:41 +08:00
|
|
|
pages = kvmalloc_array(nr_pages, sizeof(struct page *),
|
2019-07-16 17:44:22 +08:00
|
|
|
gfp_flags);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/* fallback to global pagemap for the lowmem scenario */
|
2019-08-30 00:38:27 +08:00
|
|
|
if (!pages) {
|
2019-07-16 17:44:22 +08:00
|
|
|
mutex_lock(&z_pagemap_global_lock);
|
|
|
|
pages = z_pagemap_global;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < nr_pages; ++i)
|
|
|
|
pages[i] = NULL;
|
|
|
|
|
2019-08-21 22:01:52 +08:00
|
|
|
err = 0;
|
2019-06-24 15:22:53 +08:00
|
|
|
z_erofs_pagevec_ctor_init(&ctor, Z_EROFS_NR_INLINE_PAGEVECS,
|
2019-07-31 23:57:47 +08:00
|
|
|
cl->pagevec, 0);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
for (i = 0; i < cl->vcnt; ++i) {
|
2018-09-11 03:41:14 +08:00
|
|
|
unsigned int pagenr;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:45 +08:00
|
|
|
page = z_erofs_pagevec_dequeue(&ctor, &page_type);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/* all pages in pagevec ought to be valid */
|
2018-11-13 04:43:57 +08:00
|
|
|
DBG_BUGON(!page);
|
2020-12-08 17:58:32 +08:00
|
|
|
DBG_BUGON(z_erofs_page_is_invalidated(page));
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2020-12-08 17:58:32 +08:00
|
|
|
if (z_erofs_put_shortlivedpage(pagepool, page))
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
continue;
|
|
|
|
|
|
|
|
if (page_type == Z_EROFS_VLE_PAGE_TYPE_HEAD)
|
|
|
|
pagenr = 0;
|
|
|
|
else
|
|
|
|
pagenr = z_erofs_onlinepage_index(page);
|
|
|
|
|
2018-12-11 15:17:49 +08:00
|
|
|
DBG_BUGON(pagenr >= nr_pages);
|
2018-09-19 13:49:07 +08:00
|
|
|
|
2019-08-21 22:01:52 +08:00
|
|
|
/*
|
|
|
|
* currently EROFS doesn't support multiref(dedup),
|
|
|
|
* so here erroring out one multiref page.
|
|
|
|
*/
|
2019-08-30 00:38:27 +08:00
|
|
|
if (pages[pagenr]) {
|
2019-08-21 22:01:52 +08:00
|
|
|
DBG_BUGON(1);
|
|
|
|
SetPageError(pages[pagenr]);
|
|
|
|
z_erofs_onlinepage_endio(pages[pagenr]);
|
|
|
|
err = -EFSCORRUPTED;
|
|
|
|
}
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
pages[pagenr] = page;
|
|
|
|
}
|
|
|
|
z_erofs_pagevec_ctor_exit(&ctor, true);
|
|
|
|
|
|
|
|
overlapped = false;
|
2019-07-31 23:57:47 +08:00
|
|
|
compressed_pages = pcl->compressed_pages;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2021-12-29 07:29:19 +08:00
|
|
|
for (i = 0; i < pclusterpages; ++i) {
|
2018-09-11 03:41:14 +08:00
|
|
|
unsigned int pagenr;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
page = compressed_pages[i];
|
|
|
|
/* all compressed pages ought to be valid */
|
2018-11-13 04:43:57 +08:00
|
|
|
DBG_BUGON(!page);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2021-12-29 07:29:19 +08:00
|
|
|
if (z_erofs_is_inline_pcluster(pcl)) {
|
|
|
|
if (!PageUptodate(page))
|
|
|
|
err = -EIO;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
DBG_BUGON(z_erofs_page_is_invalidated(page));
|
2020-12-08 17:58:32 +08:00
|
|
|
if (!z_erofs_is_shortlived_page(page)) {
|
2019-03-25 11:40:08 +08:00
|
|
|
if (erofs_page_is_managed(sbi, page)) {
|
2019-08-30 00:38:27 +08:00
|
|
|
if (!PageUptodate(page))
|
2019-03-25 11:40:07 +08:00
|
|
|
err = -EIO;
|
|
|
|
continue;
|
|
|
|
}
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-03-25 11:40:07 +08:00
|
|
|
/*
|
|
|
|
* only if non-head page can be selected
|
|
|
|
* for inplace decompression
|
|
|
|
*/
|
|
|
|
pagenr = z_erofs_onlinepage_index(page);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-03-25 11:40:07 +08:00
|
|
|
DBG_BUGON(pagenr >= nr_pages);
|
2019-08-30 00:38:27 +08:00
|
|
|
if (pages[pagenr]) {
|
2019-08-21 22:01:52 +08:00
|
|
|
DBG_BUGON(1);
|
|
|
|
SetPageError(pages[pagenr]);
|
|
|
|
z_erofs_onlinepage_endio(pages[pagenr]);
|
|
|
|
err = -EFSCORRUPTED;
|
|
|
|
}
|
2019-03-25 11:40:07 +08:00
|
|
|
pages[pagenr] = page;
|
|
|
|
|
|
|
|
overlapped = true;
|
|
|
|
}
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2020-12-08 17:58:32 +08:00
|
|
|
/* PG_error needs checking for all non-managed pages */
|
2019-08-30 00:38:27 +08:00
|
|
|
if (PageError(page)) {
|
2019-03-25 11:40:07 +08:00
|
|
|
DBG_BUGON(PageUptodate(page));
|
|
|
|
err = -EIO;
|
|
|
|
}
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2019-08-30 00:38:27 +08:00
|
|
|
if (err)
|
2019-03-25 11:40:07 +08:00
|
|
|
goto out;
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
llen = pcl->length >> Z_EROFS_PCLUSTER_LENGTH_BIT;
|
|
|
|
if (nr_pages << PAGE_SHIFT >= cl->pageofs + llen) {
|
|
|
|
outputsize = llen;
|
|
|
|
partial = !(pcl->length & Z_EROFS_PCLUSTER_FULL_LENGTH);
|
2019-06-24 15:22:58 +08:00
|
|
|
} else {
|
2019-07-31 23:57:47 +08:00
|
|
|
outputsize = (nr_pages << PAGE_SHIFT) - cl->pageofs;
|
2019-06-24 15:22:58 +08:00
|
|
|
partial = true;
|
|
|
|
}
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2021-12-29 07:29:19 +08:00
|
|
|
if (z_erofs_is_inline_pcluster(pcl))
|
|
|
|
inputsize = pcl->tailpacking_size;
|
|
|
|
else
|
|
|
|
inputsize = pclusterpages * PAGE_SIZE;
|
|
|
|
|
2019-06-24 15:22:57 +08:00
|
|
|
err = z_erofs_decompress(&(struct z_erofs_decompress_req) {
|
|
|
|
.sb = sb,
|
|
|
|
.in = compressed_pages,
|
|
|
|
.out = pages,
|
2021-12-29 07:29:19 +08:00
|
|
|
.pageofs_in = pcl->pageofs_in,
|
2019-07-31 23:57:47 +08:00
|
|
|
.pageofs_out = cl->pageofs,
|
2021-04-07 12:39:20 +08:00
|
|
|
.inputsize = inputsize,
|
2019-06-24 15:22:57 +08:00
|
|
|
.outputsize = outputsize,
|
2019-07-31 23:57:47 +08:00
|
|
|
.alg = pcl->algorithmformat,
|
2019-06-24 15:22:57 +08:00
|
|
|
.inplace_io = overlapped,
|
2019-06-24 15:22:58 +08:00
|
|
|
.partial_decoding = partial
|
2019-07-31 23:57:47 +08:00
|
|
|
}, pagepool);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
out:
|
2021-12-29 07:29:19 +08:00
|
|
|
/* must handle all compressed pages before actual file pages */
|
|
|
|
if (z_erofs_is_inline_pcluster(pcl)) {
|
|
|
|
page = compressed_pages[0];
|
|
|
|
WRITE_ONCE(compressed_pages[0], NULL);
|
|
|
|
put_page(page);
|
|
|
|
} else {
|
|
|
|
for (i = 0; i < pclusterpages; ++i) {
|
|
|
|
page = compressed_pages[i];
|
2019-03-25 11:40:08 +08:00
|
|
|
|
2021-12-29 07:29:19 +08:00
|
|
|
if (erofs_page_is_managed(sbi, page))
|
|
|
|
continue;
|
2019-02-27 13:33:30 +08:00
|
|
|
|
2021-12-29 07:29:19 +08:00
|
|
|
/* recycle all individual short-lived pages */
|
|
|
|
(void)z_erofs_put_shortlivedpage(pagepool, page);
|
|
|
|
WRITE_ONCE(compressed_pages[i], NULL);
|
|
|
|
}
|
2019-02-27 13:33:30 +08:00
|
|
|
}
|
|
|
|
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
for (i = 0; i < nr_pages; ++i) {
|
|
|
|
page = pages[i];
|
2019-02-27 13:33:30 +08:00
|
|
|
if (!page)
|
|
|
|
continue;
|
|
|
|
|
2020-12-08 17:58:32 +08:00
|
|
|
DBG_BUGON(z_erofs_page_is_invalidated(page));
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2020-12-08 17:58:32 +08:00
|
|
|
/* recycle all individual short-lived pages */
|
|
|
|
if (z_erofs_put_shortlivedpage(pagepool, page))
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
continue;
|
|
|
|
|
2019-08-30 00:38:27 +08:00
|
|
|
if (err < 0)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
SetPageError(page);
|
|
|
|
|
|
|
|
z_erofs_onlinepage_endio(page);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (pages == z_pagemap_global)
|
|
|
|
mutex_unlock(&z_pagemap_global_lock);
|
2019-08-30 00:38:27 +08:00
|
|
|
else if (pages != pages_onstack)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
kvfree(pages);
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
cl->nr_pages = 0;
|
|
|
|
cl->vcnt = 0;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
/* all cl locks MUST be taken before the following line */
|
|
|
|
WRITE_ONCE(pcl->next, Z_EROFS_PCLUSTER_NIL);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
/* all cl locks SHOULD be released right now */
|
|
|
|
mutex_unlock(&cl->lock);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
z_erofs_collection_put(cl);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2019-11-08 11:37:33 +08:00
|
|
|
static void z_erofs_decompress_queue(const struct z_erofs_decompressqueue *io,
|
2021-10-22 17:01:20 +08:00
|
|
|
struct page **pagepool)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
z_erofs_next_pcluster_t owned = io->head;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
while (owned != Z_EROFS_PCLUSTER_TAIL_CLOSED) {
|
|
|
|
struct z_erofs_pcluster *pcl;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/* no possible that 'owned' equals Z_EROFS_WORK_TPTR_TAIL */
|
2019-07-31 23:57:47 +08:00
|
|
|
DBG_BUGON(owned == Z_EROFS_PCLUSTER_TAIL);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/* no possible that 'owned' equals NULL */
|
2019-07-31 23:57:47 +08:00
|
|
|
DBG_BUGON(owned == Z_EROFS_PCLUSTER_NIL);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
pcl = container_of(owned, struct z_erofs_pcluster, next);
|
|
|
|
owned = READ_ONCE(pcl->next);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-10-08 20:56:15 +08:00
|
|
|
z_erofs_decompress_pcluster(io->sb, pcl, pagepool);
|
2018-08-06 11:27:53 +08:00
|
|
|
}
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2019-11-08 11:37:33 +08:00
|
|
|
static void z_erofs_decompressqueue_work(struct work_struct *work)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2019-10-08 20:56:15 +08:00
|
|
|
struct z_erofs_decompressqueue *bgq =
|
|
|
|
container_of(work, struct z_erofs_decompressqueue, u.work);
|
2021-10-22 17:01:20 +08:00
|
|
|
struct page *pagepool = NULL;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-10-08 20:56:15 +08:00
|
|
|
DBG_BUGON(bgq->head == Z_EROFS_PCLUSTER_TAIL_CLOSED);
|
2019-11-08 11:37:33 +08:00
|
|
|
z_erofs_decompress_queue(bgq, &pagepool);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2021-10-22 17:01:20 +08:00
|
|
|
erofs_release_pages(&pagepool);
|
2019-10-08 20:56:15 +08:00
|
|
|
kvfree(bgq);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2022-01-21 17:14:12 +08:00
|
|
|
static void z_erofs_decompress_kickoff(struct z_erofs_decompressqueue *io,
|
|
|
|
bool sync, int bios)
|
|
|
|
{
|
|
|
|
struct erofs_sb_info *const sbi = EROFS_SB(io->sb);
|
|
|
|
|
|
|
|
/* wake up the caller thread for sync decompression */
|
|
|
|
if (sync) {
|
|
|
|
if (!atomic_add_return(bios, &io->pending_bios))
|
2022-04-01 19:55:27 +08:00
|
|
|
complete(&io->u.done);
|
|
|
|
|
2022-01-21 17:14:12 +08:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (atomic_add_return(bios, &io->pending_bios))
|
|
|
|
return;
|
|
|
|
/* Use workqueue and sync decompression for atomic contexts only */
|
|
|
|
if (in_atomic() || irqs_disabled()) {
|
|
|
|
queue_work(z_erofs_workqueue, &io->u.work);
|
|
|
|
/* enable sync decompression for readahead */
|
|
|
|
if (sbi->opt.sync_decompress == EROFS_SYNC_DECOMPRESS_AUTO)
|
|
|
|
sbi->opt.sync_decompress = EROFS_SYNC_DECOMPRESS_FORCE_ON;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
z_erofs_decompressqueue_work(&io->u.work);
|
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
static struct page *pickup_page_for_submission(struct z_erofs_pcluster *pcl,
|
|
|
|
unsigned int nr,
|
2021-10-22 17:01:20 +08:00
|
|
|
struct page **pagepool,
|
2022-03-11 02:27:43 +08:00
|
|
|
struct address_space *mc)
|
2018-12-08 00:19:15 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
const pgoff_t index = pcl->obj.index;
|
2022-03-11 02:27:43 +08:00
|
|
|
gfp_t gfp = mapping_gfp_mask(mc);
|
2018-12-08 00:19:15 +08:00
|
|
|
bool tocache = false;
|
|
|
|
|
|
|
|
struct address_space *mapping;
|
|
|
|
struct page *oldpage, *page;
|
|
|
|
|
2018-12-08 00:19:16 +08:00
|
|
|
compressed_page_t t;
|
|
|
|
int justfound;
|
|
|
|
|
2018-12-08 00:19:15 +08:00
|
|
|
repeat:
|
2019-07-31 23:57:47 +08:00
|
|
|
page = READ_ONCE(pcl->compressed_pages[nr]);
|
2018-12-08 00:19:15 +08:00
|
|
|
oldpage = page;
|
|
|
|
|
|
|
|
if (!page)
|
|
|
|
goto out_allocpage;
|
|
|
|
|
2018-12-08 00:19:16 +08:00
|
|
|
/* process the target tagged pointer */
|
|
|
|
t = tagptr_init(compressed_page_t, page);
|
|
|
|
justfound = tagptr_unfold_tags(t);
|
|
|
|
page = tagptr_unfold_ptr(t);
|
|
|
|
|
2020-12-09 20:37:17 +08:00
|
|
|
/*
|
|
|
|
* preallocated cached pages, which is used to avoid direct reclaim
|
|
|
|
* otherwise, it will go inplace I/O path instead.
|
|
|
|
*/
|
|
|
|
if (page->private == Z_EROFS_PREALLOCATED_PAGE) {
|
|
|
|
WRITE_ONCE(pcl->compressed_pages[nr], page);
|
|
|
|
set_page_private(page, 0);
|
|
|
|
tocache = true;
|
|
|
|
goto out_tocache;
|
|
|
|
}
|
2018-12-08 00:19:15 +08:00
|
|
|
mapping = READ_ONCE(page->mapping);
|
|
|
|
|
|
|
|
/*
|
2020-12-08 17:58:32 +08:00
|
|
|
* file-backed online pages in plcuster are all locked steady,
|
2018-12-08 00:19:15 +08:00
|
|
|
* therefore it is impossible for `mapping' to be NULL.
|
|
|
|
*/
|
|
|
|
if (mapping && mapping != mc)
|
|
|
|
/* ought to be unmanaged pages */
|
|
|
|
goto out;
|
|
|
|
|
2020-12-08 17:58:32 +08:00
|
|
|
/* directly return for shortlived page as well */
|
|
|
|
if (z_erofs_is_shortlived_page(page))
|
|
|
|
goto out;
|
|
|
|
|
2018-12-08 00:19:15 +08:00
|
|
|
lock_page(page);
|
|
|
|
|
2018-12-08 00:19:16 +08:00
|
|
|
/* only true if page reclaim goes wrong, should never happen */
|
|
|
|
DBG_BUGON(justfound && PagePrivate(page));
|
|
|
|
|
2018-12-08 00:19:15 +08:00
|
|
|
/* the page is still in manage cache */
|
|
|
|
if (page->mapping == mc) {
|
2019-07-31 23:57:47 +08:00
|
|
|
WRITE_ONCE(pcl->compressed_pages[nr], page);
|
2018-12-08 00:19:15 +08:00
|
|
|
|
2019-03-25 11:40:07 +08:00
|
|
|
ClearPageError(page);
|
2018-12-08 00:19:15 +08:00
|
|
|
if (!PagePrivate(page)) {
|
2018-12-08 00:19:16 +08:00
|
|
|
/*
|
|
|
|
* impossible to be !PagePrivate(page) for
|
|
|
|
* the current restriction as well if
|
|
|
|
* the page is already in compressed_pages[].
|
|
|
|
*/
|
|
|
|
DBG_BUGON(!justfound);
|
|
|
|
|
|
|
|
justfound = 0;
|
2019-07-31 23:57:47 +08:00
|
|
|
set_page_private(page, (unsigned long)pcl);
|
2018-12-08 00:19:15 +08:00
|
|
|
SetPagePrivate(page);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* no need to submit io if it is already up-to-date */
|
|
|
|
if (PageUptodate(page)) {
|
|
|
|
unlock_page(page);
|
|
|
|
page = NULL;
|
|
|
|
}
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* the managed page has been truncated, it's unsafe to
|
|
|
|
* reuse this one, let's allocate a new cache-managed page.
|
|
|
|
*/
|
|
|
|
DBG_BUGON(page->mapping);
|
2018-12-08 00:19:16 +08:00
|
|
|
DBG_BUGON(!justfound);
|
2018-12-08 00:19:15 +08:00
|
|
|
|
|
|
|
tocache = true;
|
|
|
|
unlock_page(page);
|
|
|
|
put_page(page);
|
|
|
|
out_allocpage:
|
2019-11-21 21:59:54 +08:00
|
|
|
page = erofs_allocpage(pagepool, gfp | __GFP_NOFAIL);
|
|
|
|
if (oldpage != cmpxchg(&pcl->compressed_pages[nr], oldpage, page)) {
|
2021-10-22 17:01:20 +08:00
|
|
|
erofs_pagepool_add(pagepool, page);
|
2019-11-21 21:59:54 +08:00
|
|
|
cond_resched();
|
|
|
|
goto repeat;
|
|
|
|
}
|
2020-12-09 20:37:17 +08:00
|
|
|
out_tocache:
|
2020-12-08 17:58:33 +08:00
|
|
|
if (!tocache || add_to_page_cache_lru(page, mc, index + nr, gfp)) {
|
|
|
|
/* turn into temporary page if fails (1 ref) */
|
|
|
|
set_page_private(page, Z_EROFS_SHORTLIVED_PAGE);
|
|
|
|
goto out;
|
2020-10-22 22:57:21 +08:00
|
|
|
}
|
2020-12-08 17:58:33 +08:00
|
|
|
attach_page_private(page, pcl);
|
|
|
|
/* drop a refcount added by allocpage (then we have 2 refs here) */
|
|
|
|
put_page(page);
|
|
|
|
|
2018-12-08 00:19:15 +08:00
|
|
|
out: /* the only exit (for tracing and debugging) */
|
|
|
|
return page;
|
|
|
|
}
|
|
|
|
|
2019-10-08 20:56:15 +08:00
|
|
|
static struct z_erofs_decompressqueue *
|
|
|
|
jobqueue_init(struct super_block *sb,
|
|
|
|
struct z_erofs_decompressqueue *fgq, bool *fg)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2019-10-08 20:56:15 +08:00
|
|
|
struct z_erofs_decompressqueue *q;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-10-08 20:56:15 +08:00
|
|
|
if (fg && !*fg) {
|
|
|
|
q = kvzalloc(sizeof(*q), GFP_KERNEL | __GFP_NOWARN);
|
|
|
|
if (!q) {
|
|
|
|
*fg = true;
|
|
|
|
goto fg_out;
|
|
|
|
}
|
2019-11-08 11:37:33 +08:00
|
|
|
INIT_WORK(&q->u.work, z_erofs_decompressqueue_work);
|
2019-10-08 20:56:15 +08:00
|
|
|
} else {
|
|
|
|
fg_out:
|
|
|
|
q = fgq;
|
2022-04-01 19:55:27 +08:00
|
|
|
init_completion(&fgq->u.done);
|
2019-10-08 20:56:15 +08:00
|
|
|
atomic_set(&fgq->pending_bios, 0);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
2019-10-08 20:56:15 +08:00
|
|
|
q->sb = sb;
|
|
|
|
q->head = Z_EROFS_PCLUSTER_TAIL_CLOSED;
|
|
|
|
return q;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
/* define decompression jobqueue types */
|
2018-12-08 00:19:18 +08:00
|
|
|
enum {
|
|
|
|
JQ_BYPASS,
|
|
|
|
JQ_SUBMIT,
|
|
|
|
NR_JOBQUEUES,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void *jobqueueset_init(struct super_block *sb,
|
2019-10-08 20:56:15 +08:00
|
|
|
struct z_erofs_decompressqueue *q[],
|
|
|
|
struct z_erofs_decompressqueue *fgq, bool *fg)
|
2018-12-08 00:19:18 +08:00
|
|
|
{
|
|
|
|
/*
|
|
|
|
* if managed cache is enabled, bypass jobqueue is needed,
|
2019-07-31 23:57:47 +08:00
|
|
|
* no need to read from device for all pclusters in this queue.
|
2018-12-08 00:19:18 +08:00
|
|
|
*/
|
2019-10-08 20:56:15 +08:00
|
|
|
q[JQ_BYPASS] = jobqueue_init(sb, fgq + JQ_BYPASS, NULL);
|
|
|
|
q[JQ_SUBMIT] = jobqueue_init(sb, fgq + JQ_SUBMIT, fg);
|
2018-12-08 00:19:18 +08:00
|
|
|
|
2019-10-08 20:56:15 +08:00
|
|
|
return tagptr_cast_ptr(tagptr_fold(tagptr1_t, q[JQ_SUBMIT], *fg));
|
2018-12-08 00:19:18 +08:00
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
static void move_to_bypass_jobqueue(struct z_erofs_pcluster *pcl,
|
|
|
|
z_erofs_next_pcluster_t qtail[],
|
|
|
|
z_erofs_next_pcluster_t owned_head)
|
2018-12-08 00:19:18 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
z_erofs_next_pcluster_t *const submit_qtail = qtail[JQ_SUBMIT];
|
|
|
|
z_erofs_next_pcluster_t *const bypass_qtail = qtail[JQ_BYPASS];
|
2018-12-08 00:19:18 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
DBG_BUGON(owned_head == Z_EROFS_PCLUSTER_TAIL_CLOSED);
|
|
|
|
if (owned_head == Z_EROFS_PCLUSTER_TAIL)
|
|
|
|
owned_head = Z_EROFS_PCLUSTER_TAIL_CLOSED;
|
2018-12-08 00:19:18 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
WRITE_ONCE(pcl->next, Z_EROFS_PCLUSTER_TAIL_CLOSED);
|
2018-12-08 00:19:18 +08:00
|
|
|
|
|
|
|
WRITE_ONCE(*submit_qtail, owned_head);
|
2019-07-31 23:57:47 +08:00
|
|
|
WRITE_ONCE(*bypass_qtail, &pcl->next);
|
2018-12-08 00:19:18 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
qtail[JQ_BYPASS] = &pcl->next;
|
2018-12-08 00:19:18 +08:00
|
|
|
}
|
|
|
|
|
2022-01-21 17:14:12 +08:00
|
|
|
static void z_erofs_decompressqueue_endio(struct bio *bio)
|
|
|
|
{
|
|
|
|
tagptr1_t t = tagptr_init(tagptr1_t, bio->bi_private);
|
|
|
|
struct z_erofs_decompressqueue *q = tagptr_unfold_ptr(t);
|
|
|
|
blk_status_t err = bio->bi_status;
|
|
|
|
struct bio_vec *bvec;
|
|
|
|
struct bvec_iter_all iter_all;
|
|
|
|
|
|
|
|
bio_for_each_segment_all(bvec, bio, iter_all) {
|
|
|
|
struct page *page = bvec->bv_page;
|
|
|
|
|
|
|
|
DBG_BUGON(PageUptodate(page));
|
|
|
|
DBG_BUGON(z_erofs_page_is_invalidated(page));
|
|
|
|
|
|
|
|
if (err)
|
|
|
|
SetPageError(page);
|
|
|
|
|
|
|
|
if (erofs_page_is_managed(EROFS_SB(q->sb), page)) {
|
|
|
|
if (!err)
|
|
|
|
SetPageUptodate(page);
|
|
|
|
unlock_page(page);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
z_erofs_decompress_kickoff(q, tagptr_unfold_tags(t), -1);
|
|
|
|
bio_put(bio);
|
|
|
|
}
|
|
|
|
|
2020-01-21 14:48:19 +08:00
|
|
|
static void z_erofs_submit_queue(struct super_block *sb,
|
2020-09-19 15:27:30 +08:00
|
|
|
struct z_erofs_decompress_frontend *f,
|
2021-10-22 17:01:20 +08:00
|
|
|
struct page **pagepool,
|
2019-11-08 11:37:33 +08:00
|
|
|
struct z_erofs_decompressqueue *fgq,
|
|
|
|
bool *force_fg)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2019-10-08 20:56:13 +08:00
|
|
|
struct erofs_sb_info *const sbi = EROFS_SB(sb);
|
2019-07-31 23:57:47 +08:00
|
|
|
z_erofs_next_pcluster_t qtail[NR_JOBQUEUES];
|
2019-10-08 20:56:15 +08:00
|
|
|
struct z_erofs_decompressqueue *q[NR_JOBQUEUES];
|
2018-12-08 00:19:18 +08:00
|
|
|
void *bi_private;
|
2022-03-02 03:49:50 +08:00
|
|
|
z_erofs_next_pcluster_t owned_head = f->owned_head;
|
2021-10-14 16:10:10 +08:00
|
|
|
/* bio is NULL initially, so no need to initialize last_{index,bdev} */
|
treewide: Remove uninitialized_var() usage
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-04 04:09:38 +08:00
|
|
|
pgoff_t last_index;
|
2021-10-14 16:10:10 +08:00
|
|
|
struct block_device *last_bdev;
|
2020-01-21 14:48:19 +08:00
|
|
|
unsigned int nr_bios = 0;
|
|
|
|
struct bio *bio = NULL;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-10-08 20:56:15 +08:00
|
|
|
bi_private = jobqueueset_init(sb, q, fgq, force_fg);
|
|
|
|
qtail[JQ_BYPASS] = &q[JQ_BYPASS]->head;
|
|
|
|
qtail[JQ_SUBMIT] = &q[JQ_SUBMIT]->head;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/* by default, all need io submission */
|
2018-12-08 00:19:18 +08:00
|
|
|
q[JQ_SUBMIT]->head = owned_head;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
do {
|
2021-10-14 16:10:10 +08:00
|
|
|
struct erofs_map_dev mdev;
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_pcluster *pcl;
|
2020-01-21 14:48:19 +08:00
|
|
|
pgoff_t cur, end;
|
|
|
|
unsigned int i = 0;
|
|
|
|
bool bypass = true;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/* no possible 'owned_head' equals the following */
|
2019-07-31 23:57:47 +08:00
|
|
|
DBG_BUGON(owned_head == Z_EROFS_PCLUSTER_TAIL_CLOSED);
|
|
|
|
DBG_BUGON(owned_head == Z_EROFS_PCLUSTER_NIL);
|
|
|
|
|
|
|
|
pcl = container_of(owned_head, struct z_erofs_pcluster, next);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2021-12-29 07:29:19 +08:00
|
|
|
/* close the main owned chain at first */
|
|
|
|
owned_head = cmpxchg(&pcl->next, Z_EROFS_PCLUSTER_TAIL,
|
|
|
|
Z_EROFS_PCLUSTER_TAIL_CLOSED);
|
|
|
|
if (z_erofs_is_inline_pcluster(pcl)) {
|
|
|
|
move_to_bypass_jobqueue(pcl, qtail, owned_head);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
2021-10-14 16:10:10 +08:00
|
|
|
/* no device id here, thus it will always succeed */
|
|
|
|
mdev = (struct erofs_map_dev) {
|
|
|
|
.m_pa = blknr_to_addr(pcl->obj.index),
|
|
|
|
};
|
|
|
|
(void)erofs_map_dev(sb, &mdev);
|
|
|
|
|
|
|
|
cur = erofs_blknr(mdev.m_pa);
|
2021-04-07 12:39:20 +08:00
|
|
|
end = cur + pcl->pclusterpages;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2020-01-21 14:48:19 +08:00
|
|
|
do {
|
|
|
|
struct page *page;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2020-01-21 14:48:19 +08:00
|
|
|
page = pickup_page_for_submission(pcl, i++, pagepool,
|
2022-03-11 02:27:43 +08:00
|
|
|
MNGD_MAPPING(sbi));
|
2020-01-21 14:48:19 +08:00
|
|
|
if (!page)
|
|
|
|
continue;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2021-10-14 16:10:10 +08:00
|
|
|
if (bio && (cur != last_index + 1 ||
|
|
|
|
last_bdev != mdev.m_bdev)) {
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
submit_bio_retry:
|
2020-01-21 14:48:19 +08:00
|
|
|
submit_bio(bio);
|
|
|
|
bio = NULL;
|
|
|
|
}
|
2019-09-04 10:09:02 +08:00
|
|
|
|
2020-01-21 14:48:19 +08:00
|
|
|
if (!bio) {
|
2022-01-24 17:11:05 +08:00
|
|
|
bio = bio_alloc(mdev.m_bdev, BIO_MAX_VECS,
|
|
|
|
REQ_OP_READ, GFP_NOIO);
|
2020-01-21 14:48:19 +08:00
|
|
|
bio->bi_end_io = z_erofs_decompressqueue_endio;
|
2021-10-14 16:10:10 +08:00
|
|
|
|
|
|
|
last_bdev = mdev.m_bdev;
|
2020-01-21 14:48:19 +08:00
|
|
|
bio->bi_iter.bi_sector = (sector_t)cur <<
|
|
|
|
LOG_SECTORS_PER_BLOCK;
|
|
|
|
bio->bi_private = bi_private;
|
2020-09-19 15:27:30 +08:00
|
|
|
if (f->readahead)
|
|
|
|
bio->bi_opf |= REQ_RAHEAD;
|
2020-01-21 14:48:19 +08:00
|
|
|
++nr_bios;
|
|
|
|
}
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2020-09-19 15:27:28 +08:00
|
|
|
if (bio_add_page(bio, page, PAGE_SIZE, 0) < PAGE_SIZE)
|
2020-01-21 14:48:19 +08:00
|
|
|
goto submit_bio_retry;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2020-01-21 14:48:19 +08:00
|
|
|
last_index = cur;
|
|
|
|
bypass = false;
|
|
|
|
} while (++cur < end);
|
2018-07-26 20:22:07 +08:00
|
|
|
|
2020-01-21 14:48:19 +08:00
|
|
|
if (!bypass)
|
2019-07-31 23:57:47 +08:00
|
|
|
qtail[JQ_SUBMIT] = &pcl->next;
|
2018-12-08 00:19:18 +08:00
|
|
|
else
|
2019-07-31 23:57:47 +08:00
|
|
|
move_to_bypass_jobqueue(pcl, qtail, owned_head);
|
|
|
|
} while (owned_head != Z_EROFS_PCLUSTER_TAIL);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2018-11-13 04:43:57 +08:00
|
|
|
if (bio)
|
2019-09-04 10:09:04 +08:00
|
|
|
submit_bio(bio);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2020-01-21 14:47:47 +08:00
|
|
|
/*
|
|
|
|
* although background is preferred, no one is pending for submission.
|
|
|
|
* don't issue workqueue for decompression but drop it directly instead.
|
|
|
|
*/
|
|
|
|
if (!*force_fg && !nr_bios) {
|
|
|
|
kvfree(q[JQ_SUBMIT]);
|
2020-01-21 14:48:19 +08:00
|
|
|
return;
|
2020-01-21 14:47:47 +08:00
|
|
|
}
|
2019-10-08 20:56:15 +08:00
|
|
|
z_erofs_decompress_kickoff(q[JQ_SUBMIT], *force_fg, nr_bios);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2019-11-08 11:37:33 +08:00
|
|
|
static void z_erofs_runqueue(struct super_block *sb,
|
2020-09-19 15:27:30 +08:00
|
|
|
struct z_erofs_decompress_frontend *f,
|
2021-10-22 17:01:20 +08:00
|
|
|
struct page **pagepool, bool force_fg)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2019-10-08 20:56:15 +08:00
|
|
|
struct z_erofs_decompressqueue io[NR_JOBQUEUES];
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2022-03-02 03:49:50 +08:00
|
|
|
if (f->owned_head == Z_EROFS_PCLUSTER_TAIL)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
return;
|
2020-09-19 15:27:30 +08:00
|
|
|
z_erofs_submit_queue(sb, f, pagepool, io, &force_fg);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-11-08 11:37:33 +08:00
|
|
|
/* handle bypass queue (no i/o pclusters) immediately */
|
|
|
|
z_erofs_decompress_queue(&io[JQ_BYPASS], pagepool);
|
2019-07-31 23:57:49 +08:00
|
|
|
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
if (!force_fg)
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* wait until all bios are completed */
|
2022-04-01 19:55:27 +08:00
|
|
|
wait_for_completion_io(&io[JQ_SUBMIT].u.done);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-11-08 11:37:33 +08:00
|
|
|
/* handle synchronous decompress queue in the caller context */
|
|
|
|
z_erofs_decompress_queue(&io[JQ_SUBMIT], pagepool);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2021-10-09 04:08:39 +08:00
|
|
|
/*
|
|
|
|
* Since partial uptodate is still unimplemented for now, we have to use
|
|
|
|
* approximate readmore strategies as a start.
|
|
|
|
*/
|
|
|
|
static void z_erofs_pcluster_readmore(struct z_erofs_decompress_frontend *f,
|
|
|
|
struct readahead_control *rac,
|
|
|
|
erofs_off_t end,
|
2021-10-22 17:01:20 +08:00
|
|
|
struct page **pagepool,
|
2021-10-09 04:08:39 +08:00
|
|
|
bool backmost)
|
|
|
|
{
|
|
|
|
struct inode *inode = f->inode;
|
|
|
|
struct erofs_map_blocks *map = &f->map;
|
|
|
|
erofs_off_t cur;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
if (backmost) {
|
|
|
|
map->m_la = end;
|
2021-10-11 05:31:45 +08:00
|
|
|
err = z_erofs_map_blocks_iter(inode, map,
|
|
|
|
EROFS_GET_BLOCKS_READMORE);
|
2021-10-09 04:08:39 +08:00
|
|
|
if (err)
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* expend ra for the trailing edge if readahead */
|
|
|
|
if (rac) {
|
|
|
|
loff_t newstart = readahead_pos(rac);
|
|
|
|
|
|
|
|
cur = round_up(map->m_la + map->m_llen, PAGE_SIZE);
|
|
|
|
readahead_expand(rac, newstart, cur - newstart);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
end = round_up(end, PAGE_SIZE);
|
|
|
|
} else {
|
|
|
|
end = round_up(map->m_la, PAGE_SIZE);
|
|
|
|
|
|
|
|
if (!map->m_llen)
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
cur = map->m_la + map->m_llen - 1;
|
|
|
|
while (cur >= end) {
|
|
|
|
pgoff_t index = cur >> PAGE_SHIFT;
|
|
|
|
struct page *page;
|
|
|
|
|
|
|
|
page = erofs_grab_cache_page_nowait(inode->i_mapping, index);
|
|
|
|
if (!page)
|
|
|
|
goto skip;
|
|
|
|
|
|
|
|
if (PageUptodate(page)) {
|
|
|
|
unlock_page(page);
|
|
|
|
put_page(page);
|
|
|
|
goto skip;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = z_erofs_do_read_page(f, page, pagepool);
|
|
|
|
if (err)
|
|
|
|
erofs_err(inode->i_sb,
|
|
|
|
"readmore error at page %lu @ nid %llu",
|
|
|
|
index, EROFS_I(inode)->nid);
|
|
|
|
put_page(page);
|
|
|
|
skip:
|
|
|
|
if (cur < PAGE_SIZE)
|
|
|
|
break;
|
|
|
|
cur = (index << PAGE_SHIFT) - 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2019-11-08 11:37:33 +08:00
|
|
|
static int z_erofs_readpage(struct file *file, struct page *page)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
|
|
|
struct inode *const inode = page->mapping->host;
|
2021-12-06 22:35:52 +08:00
|
|
|
struct erofs_sb_info *const sbi = EROFS_I_SB(inode);
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_decompress_frontend f = DECOMPRESS_FRONTEND_INIT(inode);
|
2021-10-22 17:01:20 +08:00
|
|
|
struct page *pagepool = NULL;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
int err;
|
|
|
|
|
2018-11-23 01:15:58 +08:00
|
|
|
trace_erofs_readpage(page, false);
|
2018-11-23 01:21:49 +08:00
|
|
|
f.headoffset = (erofs_off_t)page->index << PAGE_SHIFT;
|
|
|
|
|
2021-10-09 04:08:39 +08:00
|
|
|
z_erofs_pcluster_readmore(&f, NULL, f.headoffset + PAGE_SIZE - 1,
|
|
|
|
&pagepool, true);
|
2020-12-09 20:37:17 +08:00
|
|
|
err = z_erofs_do_read_page(&f, page, &pagepool);
|
2021-10-09 04:08:39 +08:00
|
|
|
z_erofs_pcluster_readmore(&f, NULL, 0, &pagepool, false);
|
|
|
|
|
2022-03-02 03:49:50 +08:00
|
|
|
(void)z_erofs_collector_end(&f);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-08-19 18:34:21 +08:00
|
|
|
/* if some compressed cluster ready, need submit them anyway */
|
2021-12-06 22:35:52 +08:00
|
|
|
z_erofs_runqueue(inode->i_sb, &f, &pagepool,
|
|
|
|
z_erofs_get_sync_decompress_policy(sbi, 0));
|
2019-08-19 18:34:21 +08:00
|
|
|
|
|
|
|
if (err)
|
2019-09-04 10:09:09 +08:00
|
|
|
erofs_err(inode->i_sb, "failed to read, err [%d]", err);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2022-01-02 12:00:17 +08:00
|
|
|
erofs_put_metabuf(&f.map.buf);
|
2021-10-22 17:01:20 +08:00
|
|
|
erofs_release_pages(&pagepool);
|
2019-08-19 18:34:21 +08:00
|
|
|
return err;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2020-06-02 12:47:13 +08:00
|
|
|
static void z_erofs_readahead(struct readahead_control *rac)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2020-06-02 12:47:13 +08:00
|
|
|
struct inode *const inode = rac->mapping->host;
|
2018-09-20 00:06:56 +08:00
|
|
|
struct erofs_sb_info *const sbi = EROFS_I_SB(inode);
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_decompress_frontend f = DECOMPRESS_FRONTEND_INIT(inode);
|
2021-10-22 17:01:20 +08:00
|
|
|
struct page *pagepool = NULL, *head = NULL, *page;
|
2021-10-09 04:08:39 +08:00
|
|
|
unsigned int nr_pages;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2020-09-19 15:27:30 +08:00
|
|
|
f.readahead = true;
|
2020-06-02 12:47:13 +08:00
|
|
|
f.headoffset = readahead_pos(rac);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2021-10-09 04:08:39 +08:00
|
|
|
z_erofs_pcluster_readmore(&f, rac, f.headoffset +
|
|
|
|
readahead_length(rac) - 1, &pagepool, true);
|
|
|
|
nr_pages = readahead_count(rac);
|
|
|
|
trace_erofs_readpages(inode, readahead_index(rac), nr_pages, false);
|
2018-11-23 01:21:48 +08:00
|
|
|
|
2021-10-09 04:08:39 +08:00
|
|
|
while ((page = readahead_page(rac))) {
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
set_page_private(page, (unsigned long)head);
|
|
|
|
head = page;
|
|
|
|
}
|
|
|
|
|
2018-11-13 04:43:57 +08:00
|
|
|
while (head) {
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
struct page *page = head;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
/* traversal in reverse order */
|
|
|
|
head = (void *)page_private(page);
|
|
|
|
|
2020-12-09 20:37:17 +08:00
|
|
|
err = z_erofs_do_read_page(&f, page, &pagepool);
|
2019-09-04 10:08:56 +08:00
|
|
|
if (err)
|
2019-09-04 10:09:09 +08:00
|
|
|
erofs_err(inode->i_sb,
|
|
|
|
"readahead error at page %lu @ nid %llu",
|
|
|
|
page->index, EROFS_I(inode)->nid);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
put_page(page);
|
|
|
|
}
|
2021-10-09 04:08:39 +08:00
|
|
|
z_erofs_pcluster_readmore(&f, rac, 0, &pagepool, false);
|
2022-03-02 03:49:50 +08:00
|
|
|
(void)z_erofs_collector_end(&f);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2021-10-09 04:08:39 +08:00
|
|
|
z_erofs_runqueue(inode->i_sb, &f, &pagepool,
|
2021-12-06 22:35:52 +08:00
|
|
|
z_erofs_get_sync_decompress_policy(sbi, nr_pages));
|
2022-01-02 12:00:17 +08:00
|
|
|
erofs_put_metabuf(&f.map.buf);
|
2021-10-22 17:01:20 +08:00
|
|
|
erofs_release_pages(&pagepool);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2019-11-08 11:37:33 +08:00
|
|
|
const struct address_space_operations z_erofs_aops = {
|
|
|
|
.readpage = z_erofs_readpage,
|
2020-06-02 12:47:13 +08:00
|
|
|
.readahead = z_erofs_readahead,
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
};
|