OpenCloudOS-Kernel/drivers/phy/hisilicon/phy-hisi-inno-usb2.c

184 lines
4.5 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 21:51:43 +08:00
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* HiSilicon INNO USB2 PHY Driver.
*
* Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
#include <linux/reset.h>
#define INNO_PHY_PORT_NUM 2
#define REF_CLK_STABLE_TIME 100 /* unit:us */
#define UTMI_CLK_STABLE_TIME 200 /* unit:us */
#define TEST_CLK_STABLE_TIME 2 /* unit:ms */
#define PHY_CLK_STABLE_TIME 2 /* unit:ms */
#define UTMI_RST_COMPLETE_TIME 2 /* unit:ms */
#define POR_RST_COMPLETE_TIME 300 /* unit:us */
#define PHY_TEST_DATA GENMASK(7, 0)
#define PHY_TEST_ADDR GENMASK(15, 8)
#define PHY_TEST_PORT GENMASK(18, 16)
#define PHY_TEST_WREN BIT(21)
#define PHY_TEST_CLK BIT(22) /* rising edge active */
#define PHY_TEST_RST BIT(23) /* low active */
#define PHY_CLK_ENABLE BIT(2)
struct hisi_inno_phy_port {
struct reset_control *utmi_rst;
struct hisi_inno_phy_priv *priv;
};
struct hisi_inno_phy_priv {
void __iomem *mmio;
struct clk *ref_clk;
struct reset_control *por_rst;
struct hisi_inno_phy_port ports[INNO_PHY_PORT_NUM];
};
static void hisi_inno_phy_write_reg(struct hisi_inno_phy_priv *priv,
u8 port, u32 addr, u32 data)
{
void __iomem *reg = priv->mmio;
u32 val;
val = (data & PHY_TEST_DATA) |
((addr << 8) & PHY_TEST_ADDR) |
((port << 16) & PHY_TEST_PORT) |
PHY_TEST_WREN | PHY_TEST_RST;
writel(val, reg);
val |= PHY_TEST_CLK;
writel(val, reg);
val &= ~PHY_TEST_CLK;
writel(val, reg);
}
static void hisi_inno_phy_setup(struct hisi_inno_phy_priv *priv)
{
/* The phy clk is controlled by the port0 register 0x06. */
hisi_inno_phy_write_reg(priv, 0, 0x06, PHY_CLK_ENABLE);
msleep(PHY_CLK_STABLE_TIME);
}
static int hisi_inno_phy_init(struct phy *phy)
{
struct hisi_inno_phy_port *port = phy_get_drvdata(phy);
struct hisi_inno_phy_priv *priv = port->priv;
int ret;
ret = clk_prepare_enable(priv->ref_clk);
if (ret)
return ret;
udelay(REF_CLK_STABLE_TIME);
reset_control_deassert(priv->por_rst);
udelay(POR_RST_COMPLETE_TIME);
/* Set up phy registers */
hisi_inno_phy_setup(priv);
reset_control_deassert(port->utmi_rst);
udelay(UTMI_RST_COMPLETE_TIME);
return 0;
}
static int hisi_inno_phy_exit(struct phy *phy)
{
struct hisi_inno_phy_port *port = phy_get_drvdata(phy);
struct hisi_inno_phy_priv *priv = port->priv;
reset_control_assert(port->utmi_rst);
reset_control_assert(priv->por_rst);
clk_disable_unprepare(priv->ref_clk);
return 0;
}
static const struct phy_ops hisi_inno_phy_ops = {
.init = hisi_inno_phy_init,
.exit = hisi_inno_phy_exit,
.owner = THIS_MODULE,
};
static int hisi_inno_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct hisi_inno_phy_priv *priv;
struct phy_provider *provider;
struct device_node *child;
int i = 0;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->mmio = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(priv->mmio)) {
ret = PTR_ERR(priv->mmio);
return ret;
}
priv->ref_clk = devm_clk_get(dev, NULL);
if (IS_ERR(priv->ref_clk))
return PTR_ERR(priv->ref_clk);
priv->por_rst = devm_reset_control_get_exclusive(dev, NULL);
if (IS_ERR(priv->por_rst))
return PTR_ERR(priv->por_rst);
for_each_child_of_node(np, child) {
struct reset_control *rst;
struct phy *phy;
rst = of_reset_control_get_exclusive(child, NULL);
if (IS_ERR(rst))
return PTR_ERR(rst);
priv->ports[i].utmi_rst = rst;
priv->ports[i].priv = priv;
phy = devm_phy_create(dev, child, &hisi_inno_phy_ops);
if (IS_ERR(phy))
return PTR_ERR(phy);
phy_set_bus_width(phy, 8);
phy_set_drvdata(phy, &priv->ports[i]);
i++;
if (i > INNO_PHY_PORT_NUM) {
dev_warn(dev, "Support %d ports in maximum\n", i);
break;
}
}
provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(provider);
}
static const struct of_device_id hisi_inno_phy_of_match[] = {
{ .compatible = "hisilicon,inno-usb2-phy", },
{ .compatible = "hisilicon,hi3798cv200-usb2-phy", },
{ },
};
MODULE_DEVICE_TABLE(of, hisi_inno_phy_of_match);
static struct platform_driver hisi_inno_phy_driver = {
.probe = hisi_inno_phy_probe,
.driver = {
.name = "hisi-inno-phy",
.of_match_table = hisi_inno_phy_of_match,
}
};
module_platform_driver(hisi_inno_phy_driver);
MODULE_DESCRIPTION("HiSilicon INNO USB2 PHY Driver");
MODULE_LICENSE("GPL v2");