OpenCloudOS-Kernel/drivers/gpu/drm/i915/i915_irq.c

3279 lines
94 KiB
C
Raw Normal View History

/* i915_irq.c -- IRQ support for the I915 -*- linux-c -*-
*/
/*
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/sysrq.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <drm/drmP.h>
#include <drm/i915_drm.h>
#include "i915_drv.h"
#include "i915_trace.h"
#include "intel_drv.h"
static const u32 hpd_ibx[] = {
[HPD_CRT] = SDE_CRT_HOTPLUG,
[HPD_SDVO_B] = SDE_SDVOB_HOTPLUG,
[HPD_PORT_B] = SDE_PORTB_HOTPLUG,
[HPD_PORT_C] = SDE_PORTC_HOTPLUG,
[HPD_PORT_D] = SDE_PORTD_HOTPLUG
};
static const u32 hpd_cpt[] = {
[HPD_CRT] = SDE_CRT_HOTPLUG_CPT,
[HPD_SDVO_B] = SDE_SDVOB_HOTPLUG_CPT,
[HPD_PORT_B] = SDE_PORTB_HOTPLUG_CPT,
[HPD_PORT_C] = SDE_PORTC_HOTPLUG_CPT,
[HPD_PORT_D] = SDE_PORTD_HOTPLUG_CPT
};
static const u32 hpd_mask_i915[] = {
[HPD_CRT] = CRT_HOTPLUG_INT_EN,
[HPD_SDVO_B] = SDVOB_HOTPLUG_INT_EN,
[HPD_SDVO_C] = SDVOC_HOTPLUG_INT_EN,
[HPD_PORT_B] = PORTB_HOTPLUG_INT_EN,
[HPD_PORT_C] = PORTC_HOTPLUG_INT_EN,
[HPD_PORT_D] = PORTD_HOTPLUG_INT_EN
};
static const u32 hpd_status_gen4[] = {
[HPD_CRT] = CRT_HOTPLUG_INT_STATUS,
[HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_G4X,
[HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_G4X,
[HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS,
[HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS,
[HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS
};
static const u32 hpd_status_i915[] = { /* i915 and valleyview are the same */
[HPD_CRT] = CRT_HOTPLUG_INT_STATUS,
[HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_I915,
[HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_I915,
[HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS,
[HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS,
[HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS
};
/* For display hotplug interrupt */
static void
ironlake_enable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
{
assert_spin_locked(&dev_priv->irq_lock);
drm/i915: allow package C8+ states on Haswell (disabled) This patch allows PC8+ states on Haswell. These states can only be reached when all the display outputs are disabled, and they allow some more power savings. The fact that the graphics device is allowing PC8+ doesn't mean that the machine will actually enter PC8+: all the other devices also need to allow PC8+. For now this option is disabled by default. You need i915.allow_pc8=1 if you want it. This patch adds a big comment inside i915_drv.h explaining how it works and how it tracks things. Read it. v2: (this is not really v2, many previous versions were already sent, but they had different names) - Use the new functions to enable/disable GTIMR and GEN6_PMIMR - Rename almost all variables and functions to names suggested by Chris - More WARNs on the IRQ handling code - Also disable PC8 when there's GPU work to do (thanks to Ben for the help on this), so apps can run caster - Enable PC8 on a delayed work function that is delayed for 5 seconds. This makes sure we only enable PC8+ if we're really idle - Make sure we're not in PC8+ when suspending v3: - WARN if IRQs are disabled on __wait_seqno - Replace some DRM_ERRORs with WARNs - Fix calls to restore GT and PM interrupts - Use intel_mark_busy instead of intel_ring_advance to disable PC8 v4: - Use the force_wake, Luke! v5: - Remove the "IIR is not zero" WARNs - Move the force_wake chunk to its own patch - Only restore what's missing from RC6, not everything Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-20 00:18:09 +08:00
if (dev_priv->pc8.irqs_disabled) {
WARN(1, "IRQs disabled\n");
dev_priv->pc8.regsave.deimr &= ~mask;
return;
}
if ((dev_priv->irq_mask & mask) != 0) {
dev_priv->irq_mask &= ~mask;
I915_WRITE(DEIMR, dev_priv->irq_mask);
POSTING_READ(DEIMR);
}
}
static void
ironlake_disable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
{
assert_spin_locked(&dev_priv->irq_lock);
drm/i915: allow package C8+ states on Haswell (disabled) This patch allows PC8+ states on Haswell. These states can only be reached when all the display outputs are disabled, and they allow some more power savings. The fact that the graphics device is allowing PC8+ doesn't mean that the machine will actually enter PC8+: all the other devices also need to allow PC8+. For now this option is disabled by default. You need i915.allow_pc8=1 if you want it. This patch adds a big comment inside i915_drv.h explaining how it works and how it tracks things. Read it. v2: (this is not really v2, many previous versions were already sent, but they had different names) - Use the new functions to enable/disable GTIMR and GEN6_PMIMR - Rename almost all variables and functions to names suggested by Chris - More WARNs on the IRQ handling code - Also disable PC8 when there's GPU work to do (thanks to Ben for the help on this), so apps can run caster - Enable PC8 on a delayed work function that is delayed for 5 seconds. This makes sure we only enable PC8+ if we're really idle - Make sure we're not in PC8+ when suspending v3: - WARN if IRQs are disabled on __wait_seqno - Replace some DRM_ERRORs with WARNs - Fix calls to restore GT and PM interrupts - Use intel_mark_busy instead of intel_ring_advance to disable PC8 v4: - Use the force_wake, Luke! v5: - Remove the "IIR is not zero" WARNs - Move the force_wake chunk to its own patch - Only restore what's missing from RC6, not everything Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-20 00:18:09 +08:00
if (dev_priv->pc8.irqs_disabled) {
WARN(1, "IRQs disabled\n");
dev_priv->pc8.regsave.deimr |= mask;
return;
}
if ((dev_priv->irq_mask & mask) != mask) {
dev_priv->irq_mask |= mask;
I915_WRITE(DEIMR, dev_priv->irq_mask);
POSTING_READ(DEIMR);
}
}
/**
* ilk_update_gt_irq - update GTIMR
* @dev_priv: driver private
* @interrupt_mask: mask of interrupt bits to update
* @enabled_irq_mask: mask of interrupt bits to enable
*/
static void ilk_update_gt_irq(struct drm_i915_private *dev_priv,
uint32_t interrupt_mask,
uint32_t enabled_irq_mask)
{
assert_spin_locked(&dev_priv->irq_lock);
drm/i915: allow package C8+ states on Haswell (disabled) This patch allows PC8+ states on Haswell. These states can only be reached when all the display outputs are disabled, and they allow some more power savings. The fact that the graphics device is allowing PC8+ doesn't mean that the machine will actually enter PC8+: all the other devices also need to allow PC8+. For now this option is disabled by default. You need i915.allow_pc8=1 if you want it. This patch adds a big comment inside i915_drv.h explaining how it works and how it tracks things. Read it. v2: (this is not really v2, many previous versions were already sent, but they had different names) - Use the new functions to enable/disable GTIMR and GEN6_PMIMR - Rename almost all variables and functions to names suggested by Chris - More WARNs on the IRQ handling code - Also disable PC8 when there's GPU work to do (thanks to Ben for the help on this), so apps can run caster - Enable PC8 on a delayed work function that is delayed for 5 seconds. This makes sure we only enable PC8+ if we're really idle - Make sure we're not in PC8+ when suspending v3: - WARN if IRQs are disabled on __wait_seqno - Replace some DRM_ERRORs with WARNs - Fix calls to restore GT and PM interrupts - Use intel_mark_busy instead of intel_ring_advance to disable PC8 v4: - Use the force_wake, Luke! v5: - Remove the "IIR is not zero" WARNs - Move the force_wake chunk to its own patch - Only restore what's missing from RC6, not everything Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-20 00:18:09 +08:00
if (dev_priv->pc8.irqs_disabled) {
WARN(1, "IRQs disabled\n");
dev_priv->pc8.regsave.gtimr &= ~interrupt_mask;
dev_priv->pc8.regsave.gtimr |= (~enabled_irq_mask &
interrupt_mask);
return;
}
dev_priv->gt_irq_mask &= ~interrupt_mask;
dev_priv->gt_irq_mask |= (~enabled_irq_mask & interrupt_mask);
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
POSTING_READ(GTIMR);
}
void ilk_enable_gt_irq(struct drm_i915_private *dev_priv, uint32_t mask)
{
ilk_update_gt_irq(dev_priv, mask, mask);
}
void ilk_disable_gt_irq(struct drm_i915_private *dev_priv, uint32_t mask)
{
ilk_update_gt_irq(dev_priv, mask, 0);
}
/**
* snb_update_pm_irq - update GEN6_PMIMR
* @dev_priv: driver private
* @interrupt_mask: mask of interrupt bits to update
* @enabled_irq_mask: mask of interrupt bits to enable
*/
static void snb_update_pm_irq(struct drm_i915_private *dev_priv,
uint32_t interrupt_mask,
uint32_t enabled_irq_mask)
{
uint32_t new_val;
assert_spin_locked(&dev_priv->irq_lock);
drm/i915: allow package C8+ states on Haswell (disabled) This patch allows PC8+ states on Haswell. These states can only be reached when all the display outputs are disabled, and they allow some more power savings. The fact that the graphics device is allowing PC8+ doesn't mean that the machine will actually enter PC8+: all the other devices also need to allow PC8+. For now this option is disabled by default. You need i915.allow_pc8=1 if you want it. This patch adds a big comment inside i915_drv.h explaining how it works and how it tracks things. Read it. v2: (this is not really v2, many previous versions were already sent, but they had different names) - Use the new functions to enable/disable GTIMR and GEN6_PMIMR - Rename almost all variables and functions to names suggested by Chris - More WARNs on the IRQ handling code - Also disable PC8 when there's GPU work to do (thanks to Ben for the help on this), so apps can run caster - Enable PC8 on a delayed work function that is delayed for 5 seconds. This makes sure we only enable PC8+ if we're really idle - Make sure we're not in PC8+ when suspending v3: - WARN if IRQs are disabled on __wait_seqno - Replace some DRM_ERRORs with WARNs - Fix calls to restore GT and PM interrupts - Use intel_mark_busy instead of intel_ring_advance to disable PC8 v4: - Use the force_wake, Luke! v5: - Remove the "IIR is not zero" WARNs - Move the force_wake chunk to its own patch - Only restore what's missing from RC6, not everything Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-20 00:18:09 +08:00
if (dev_priv->pc8.irqs_disabled) {
WARN(1, "IRQs disabled\n");
dev_priv->pc8.regsave.gen6_pmimr &= ~interrupt_mask;
dev_priv->pc8.regsave.gen6_pmimr |= (~enabled_irq_mask &
interrupt_mask);
return;
}
new_val = dev_priv->pm_irq_mask;
new_val &= ~interrupt_mask;
new_val |= (~enabled_irq_mask & interrupt_mask);
if (new_val != dev_priv->pm_irq_mask) {
dev_priv->pm_irq_mask = new_val;
I915_WRITE(GEN6_PMIMR, dev_priv->pm_irq_mask);
POSTING_READ(GEN6_PMIMR);
}
}
void snb_enable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask)
{
snb_update_pm_irq(dev_priv, mask, mask);
}
void snb_disable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask)
{
snb_update_pm_irq(dev_priv, mask, 0);
}
static bool ivb_can_enable_err_int(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *crtc;
enum pipe pipe;
assert_spin_locked(&dev_priv->irq_lock);
for_each_pipe(pipe) {
crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
if (crtc->cpu_fifo_underrun_disabled)
return false;
}
return true;
}
static bool cpt_can_enable_serr_int(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
enum pipe pipe;
struct intel_crtc *crtc;
assert_spin_locked(&dev_priv->irq_lock);
for_each_pipe(pipe) {
crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
if (crtc->pch_fifo_underrun_disabled)
return false;
}
return true;
}
static void ironlake_set_fifo_underrun_reporting(struct drm_device *dev,
enum pipe pipe, bool enable)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t bit = (pipe == PIPE_A) ? DE_PIPEA_FIFO_UNDERRUN :
DE_PIPEB_FIFO_UNDERRUN;
if (enable)
ironlake_enable_display_irq(dev_priv, bit);
else
ironlake_disable_display_irq(dev_priv, bit);
}
static void ivybridge_set_fifo_underrun_reporting(struct drm_device *dev,
enum pipe pipe, bool enable)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (enable) {
I915_WRITE(GEN7_ERR_INT, ERR_INT_FIFO_UNDERRUN(pipe));
if (!ivb_can_enable_err_int(dev))
return;
ironlake_enable_display_irq(dev_priv, DE_ERR_INT_IVB);
} else {
bool was_enabled = !(I915_READ(DEIMR) & DE_ERR_INT_IVB);
/* Change the state _after_ we've read out the current one. */
ironlake_disable_display_irq(dev_priv, DE_ERR_INT_IVB);
if (!was_enabled &&
(I915_READ(GEN7_ERR_INT) & ERR_INT_FIFO_UNDERRUN(pipe))) {
DRM_DEBUG_KMS("uncleared fifo underrun on pipe %c\n",
pipe_name(pipe));
}
}
}
/**
* ibx_display_interrupt_update - update SDEIMR
* @dev_priv: driver private
* @interrupt_mask: mask of interrupt bits to update
* @enabled_irq_mask: mask of interrupt bits to enable
*/
static void ibx_display_interrupt_update(struct drm_i915_private *dev_priv,
uint32_t interrupt_mask,
uint32_t enabled_irq_mask)
{
uint32_t sdeimr = I915_READ(SDEIMR);
sdeimr &= ~interrupt_mask;
sdeimr |= (~enabled_irq_mask & interrupt_mask);
assert_spin_locked(&dev_priv->irq_lock);
drm/i915: allow package C8+ states on Haswell (disabled) This patch allows PC8+ states on Haswell. These states can only be reached when all the display outputs are disabled, and they allow some more power savings. The fact that the graphics device is allowing PC8+ doesn't mean that the machine will actually enter PC8+: all the other devices also need to allow PC8+. For now this option is disabled by default. You need i915.allow_pc8=1 if you want it. This patch adds a big comment inside i915_drv.h explaining how it works and how it tracks things. Read it. v2: (this is not really v2, many previous versions were already sent, but they had different names) - Use the new functions to enable/disable GTIMR and GEN6_PMIMR - Rename almost all variables and functions to names suggested by Chris - More WARNs on the IRQ handling code - Also disable PC8 when there's GPU work to do (thanks to Ben for the help on this), so apps can run caster - Enable PC8 on a delayed work function that is delayed for 5 seconds. This makes sure we only enable PC8+ if we're really idle - Make sure we're not in PC8+ when suspending v3: - WARN if IRQs are disabled on __wait_seqno - Replace some DRM_ERRORs with WARNs - Fix calls to restore GT and PM interrupts - Use intel_mark_busy instead of intel_ring_advance to disable PC8 v4: - Use the force_wake, Luke! v5: - Remove the "IIR is not zero" WARNs - Move the force_wake chunk to its own patch - Only restore what's missing from RC6, not everything Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-20 00:18:09 +08:00
if (dev_priv->pc8.irqs_disabled &&
(interrupt_mask & SDE_HOTPLUG_MASK_CPT)) {
WARN(1, "IRQs disabled\n");
dev_priv->pc8.regsave.sdeimr &= ~interrupt_mask;
dev_priv->pc8.regsave.sdeimr |= (~enabled_irq_mask &
interrupt_mask);
return;
}
I915_WRITE(SDEIMR, sdeimr);
POSTING_READ(SDEIMR);
}
#define ibx_enable_display_interrupt(dev_priv, bits) \
ibx_display_interrupt_update((dev_priv), (bits), (bits))
#define ibx_disable_display_interrupt(dev_priv, bits) \
ibx_display_interrupt_update((dev_priv), (bits), 0)
static void ibx_set_fifo_underrun_reporting(struct drm_device *dev,
enum transcoder pch_transcoder,
bool enable)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t bit = (pch_transcoder == TRANSCODER_A) ?
SDE_TRANSA_FIFO_UNDER : SDE_TRANSB_FIFO_UNDER;
if (enable)
ibx_enable_display_interrupt(dev_priv, bit);
else
ibx_disable_display_interrupt(dev_priv, bit);
}
static void cpt_set_fifo_underrun_reporting(struct drm_device *dev,
enum transcoder pch_transcoder,
bool enable)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (enable) {
drm/i915: improve SERR_INT clearing for fifo underrun reporting The current code won't report any fifo underruns on cpt if just one pipe has fifo underrun reporting disabled. We can't enable the interrupts, but we can still check the per-transcoder bits and so report the underrun delayed if: - We always clear the transcoder's bit (and none of the other bits) when enabling. - We check the transcoder's bit after disabling (to avoid racing with the interrupt handler). v2: I've forgotten to actually remove the old SERR_INT clearing. v3: Use transcoder_name as suggested by Paulo Zanoni. Paulo also noticed a logic bug: When an underrun interrupt fires we report it both in the interrupt handler and when checking for underruns when disabling it in cpt_set_fifo_underrun_reporting. But that second check is only required if the interrupt is disabled and we're switching of underrun reporting (e.g. because we're disabling the crtc). Hence check for that condition. At first I wanted to rework the code to pass that bit of information from the uppper functions down to cpt_set_fifo_underrun_reporting. But that turned out too messy. Hence the quick&dirty check whether the south error interrupt source is masked off or not. v4: Streamline the control flow a bit. v5: s/pipe/pch transcoder/ in the dmesg output, suggested by Paulo. v6: Review from Paulo: - Reorder the was_enabled assignment to only read the register when we need it. Also add a comment that we need to do that before updating the register. - s/%i/%c/ fix for the debug output. - Fix the checkpath complaint in the SERR_INT_TRANS_FIFO_UNDERRUN #define. v7: Hopefully put that elusive SERR hunk back into this patch, spotted by Paulo. Cc: Paulo Zanoni <przanoni@gmail.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-10 14:30:23 +08:00
I915_WRITE(SERR_INT,
SERR_INT_TRANS_FIFO_UNDERRUN(pch_transcoder));
if (!cpt_can_enable_serr_int(dev))
return;
ibx_enable_display_interrupt(dev_priv, SDE_ERROR_CPT);
} else {
drm/i915: improve SERR_INT clearing for fifo underrun reporting The current code won't report any fifo underruns on cpt if just one pipe has fifo underrun reporting disabled. We can't enable the interrupts, but we can still check the per-transcoder bits and so report the underrun delayed if: - We always clear the transcoder's bit (and none of the other bits) when enabling. - We check the transcoder's bit after disabling (to avoid racing with the interrupt handler). v2: I've forgotten to actually remove the old SERR_INT clearing. v3: Use transcoder_name as suggested by Paulo Zanoni. Paulo also noticed a logic bug: When an underrun interrupt fires we report it both in the interrupt handler and when checking for underruns when disabling it in cpt_set_fifo_underrun_reporting. But that second check is only required if the interrupt is disabled and we're switching of underrun reporting (e.g. because we're disabling the crtc). Hence check for that condition. At first I wanted to rework the code to pass that bit of information from the uppper functions down to cpt_set_fifo_underrun_reporting. But that turned out too messy. Hence the quick&dirty check whether the south error interrupt source is masked off or not. v4: Streamline the control flow a bit. v5: s/pipe/pch transcoder/ in the dmesg output, suggested by Paulo. v6: Review from Paulo: - Reorder the was_enabled assignment to only read the register when we need it. Also add a comment that we need to do that before updating the register. - s/%i/%c/ fix for the debug output. - Fix the checkpath complaint in the SERR_INT_TRANS_FIFO_UNDERRUN #define. v7: Hopefully put that elusive SERR hunk back into this patch, spotted by Paulo. Cc: Paulo Zanoni <przanoni@gmail.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-10 14:30:23 +08:00
uint32_t tmp = I915_READ(SERR_INT);
bool was_enabled = !(I915_READ(SDEIMR) & SDE_ERROR_CPT);
/* Change the state _after_ we've read out the current one. */
ibx_disable_display_interrupt(dev_priv, SDE_ERROR_CPT);
drm/i915: improve SERR_INT clearing for fifo underrun reporting The current code won't report any fifo underruns on cpt if just one pipe has fifo underrun reporting disabled. We can't enable the interrupts, but we can still check the per-transcoder bits and so report the underrun delayed if: - We always clear the transcoder's bit (and none of the other bits) when enabling. - We check the transcoder's bit after disabling (to avoid racing with the interrupt handler). v2: I've forgotten to actually remove the old SERR_INT clearing. v3: Use transcoder_name as suggested by Paulo Zanoni. Paulo also noticed a logic bug: When an underrun interrupt fires we report it both in the interrupt handler and when checking for underruns when disabling it in cpt_set_fifo_underrun_reporting. But that second check is only required if the interrupt is disabled and we're switching of underrun reporting (e.g. because we're disabling the crtc). Hence check for that condition. At first I wanted to rework the code to pass that bit of information from the uppper functions down to cpt_set_fifo_underrun_reporting. But that turned out too messy. Hence the quick&dirty check whether the south error interrupt source is masked off or not. v4: Streamline the control flow a bit. v5: s/pipe/pch transcoder/ in the dmesg output, suggested by Paulo. v6: Review from Paulo: - Reorder the was_enabled assignment to only read the register when we need it. Also add a comment that we need to do that before updating the register. - s/%i/%c/ fix for the debug output. - Fix the checkpath complaint in the SERR_INT_TRANS_FIFO_UNDERRUN #define. v7: Hopefully put that elusive SERR hunk back into this patch, spotted by Paulo. Cc: Paulo Zanoni <przanoni@gmail.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-10 14:30:23 +08:00
if (!was_enabled &&
(tmp & SERR_INT_TRANS_FIFO_UNDERRUN(pch_transcoder))) {
DRM_DEBUG_KMS("uncleared pch fifo underrun on pch transcoder %c\n",
transcoder_name(pch_transcoder));
}
}
}
/**
* intel_set_cpu_fifo_underrun_reporting - enable/disable FIFO underrun messages
* @dev: drm device
* @pipe: pipe
* @enable: true if we want to report FIFO underrun errors, false otherwise
*
* This function makes us disable or enable CPU fifo underruns for a specific
* pipe. Notice that on some Gens (e.g. IVB, HSW), disabling FIFO underrun
* reporting for one pipe may also disable all the other CPU error interruts for
* the other pipes, due to the fact that there's just one interrupt mask/enable
* bit for all the pipes.
*
* Returns the previous state of underrun reporting.
*/
bool intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
enum pipe pipe, bool enable)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
unsigned long flags;
bool ret;
spin_lock_irqsave(&dev_priv->irq_lock, flags);
ret = !intel_crtc->cpu_fifo_underrun_disabled;
if (enable == ret)
goto done;
intel_crtc->cpu_fifo_underrun_disabled = !enable;
if (IS_GEN5(dev) || IS_GEN6(dev))
ironlake_set_fifo_underrun_reporting(dev, pipe, enable);
else if (IS_GEN7(dev))
ivybridge_set_fifo_underrun_reporting(dev, pipe, enable);
done:
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
return ret;
}
/**
* intel_set_pch_fifo_underrun_reporting - enable/disable FIFO underrun messages
* @dev: drm device
* @pch_transcoder: the PCH transcoder (same as pipe on IVB and older)
* @enable: true if we want to report FIFO underrun errors, false otherwise
*
* This function makes us disable or enable PCH fifo underruns for a specific
* PCH transcoder. Notice that on some PCHs (e.g. CPT/PPT), disabling FIFO
* underrun reporting for one transcoder may also disable all the other PCH
* error interruts for the other transcoders, due to the fact that there's just
* one interrupt mask/enable bit for all the transcoders.
*
* Returns the previous state of underrun reporting.
*/
bool intel_set_pch_fifo_underrun_reporting(struct drm_device *dev,
enum transcoder pch_transcoder,
bool enable)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pch_transcoder];
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
unsigned long flags;
bool ret;
/*
* NOTE: Pre-LPT has a fixed cpu pipe -> pch transcoder mapping, but LPT
* has only one pch transcoder A that all pipes can use. To avoid racy
* pch transcoder -> pipe lookups from interrupt code simply store the
* underrun statistics in crtc A. Since we never expose this anywhere
* nor use it outside of the fifo underrun code here using the "wrong"
* crtc on LPT won't cause issues.
*/
spin_lock_irqsave(&dev_priv->irq_lock, flags);
ret = !intel_crtc->pch_fifo_underrun_disabled;
if (enable == ret)
goto done;
intel_crtc->pch_fifo_underrun_disabled = !enable;
if (HAS_PCH_IBX(dev))
ibx_set_fifo_underrun_reporting(dev, pch_transcoder, enable);
else
cpt_set_fifo_underrun_reporting(dev, pch_transcoder, enable);
done:
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
return ret;
}
void
i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
{
u32 reg = PIPESTAT(pipe);
u32 pipestat = I915_READ(reg) & 0x7fff0000;
assert_spin_locked(&dev_priv->irq_lock);
if ((pipestat & mask) == mask)
return;
/* Enable the interrupt, clear any pending status */
pipestat |= mask | (mask >> 16);
I915_WRITE(reg, pipestat);
POSTING_READ(reg);
}
void
i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
{
u32 reg = PIPESTAT(pipe);
u32 pipestat = I915_READ(reg) & 0x7fff0000;
assert_spin_locked(&dev_priv->irq_lock);
if ((pipestat & mask) == 0)
return;
pipestat &= ~mask;
I915_WRITE(reg, pipestat);
POSTING_READ(reg);
}
/**
* i915_enable_asle_pipestat - enable ASLE pipestat for OpRegion
*/
static void i915_enable_asle_pipestat(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
unsigned long irqflags;
if (!dev_priv->opregion.asle || !IS_MOBILE(dev))
return;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
i915_enable_pipestat(dev_priv, 1, PIPE_LEGACY_BLC_EVENT_ENABLE);
if (INTEL_INFO(dev)->gen >= 4)
i915_enable_pipestat(dev_priv, 0, PIPE_LEGACY_BLC_EVENT_ENABLE);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
/**
* i915_pipe_enabled - check if a pipe is enabled
* @dev: DRM device
* @pipe: pipe to check
*
* Reading certain registers when the pipe is disabled can hang the chip.
* Use this routine to make sure the PLL is running and the pipe is active
* before reading such registers if unsure.
*/
static int
i915_pipe_enabled(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
/* Locking is horribly broken here, but whatever. */
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
return intel_crtc->active;
} else {
return I915_READ(PIPECONF(pipe)) & PIPECONF_ENABLE;
}
}
/* Called from drm generic code, passed a 'crtc', which
* we use as a pipe index
*/
static u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long high_frame;
unsigned long low_frame;
u32 high1, high2, low;
if (!i915_pipe_enabled(dev, pipe)) {
DRM_DEBUG_DRIVER("trying to get vblank count for disabled "
"pipe %c\n", pipe_name(pipe));
return 0;
}
high_frame = PIPEFRAME(pipe);
low_frame = PIPEFRAMEPIXEL(pipe);
/*
* High & low register fields aren't synchronized, so make sure
* we get a low value that's stable across two reads of the high
* register.
*/
do {
high1 = I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK;
low = I915_READ(low_frame) & PIPE_FRAME_LOW_MASK;
high2 = I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK;
} while (high1 != high2);
high1 >>= PIPE_FRAME_HIGH_SHIFT;
low >>= PIPE_FRAME_LOW_SHIFT;
return (high1 << 8) | low;
}
static u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int reg = PIPE_FRMCOUNT_GM45(pipe);
if (!i915_pipe_enabled(dev, pipe)) {
DRM_DEBUG_DRIVER("trying to get vblank count for disabled "
"pipe %c\n", pipe_name(pipe));
return 0;
}
return I915_READ(reg);
}
static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
int *vpos, int *hpos)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 vbl = 0, position = 0;
int vbl_start, vbl_end, htotal, vtotal;
bool in_vbl = true;
int ret = 0;
enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
pipe);
if (!i915_pipe_enabled(dev, pipe)) {
DRM_DEBUG_DRIVER("trying to get scanoutpos for disabled "
"pipe %c\n", pipe_name(pipe));
return 0;
}
/* Get vtotal. */
vtotal = 1 + ((I915_READ(VTOTAL(cpu_transcoder)) >> 16) & 0x1fff);
if (INTEL_INFO(dev)->gen >= 4) {
/* No obvious pixelcount register. Only query vertical
* scanout position from Display scan line register.
*/
position = I915_READ(PIPEDSL(pipe));
/* Decode into vertical scanout position. Don't have
* horizontal scanout position.
*/
*vpos = position & 0x1fff;
*hpos = 0;
} else {
/* Have access to pixelcount since start of frame.
* We can split this into vertical and horizontal
* scanout position.
*/
position = (I915_READ(PIPEFRAMEPIXEL(pipe)) & PIPE_PIXEL_MASK) >> PIPE_PIXEL_SHIFT;
htotal = 1 + ((I915_READ(HTOTAL(cpu_transcoder)) >> 16) & 0x1fff);
*vpos = position / htotal;
*hpos = position - (*vpos * htotal);
}
/* Query vblank area. */
vbl = I915_READ(VBLANK(cpu_transcoder));
/* Test position against vblank region. */
vbl_start = vbl & 0x1fff;
vbl_end = (vbl >> 16) & 0x1fff;
if ((*vpos < vbl_start) || (*vpos > vbl_end))
in_vbl = false;
/* Inside "upper part" of vblank area? Apply corrective offset: */
if (in_vbl && (*vpos >= vbl_start))
*vpos = *vpos - vtotal;
/* Readouts valid? */
if (vbl > 0)
ret |= DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_ACCURATE;
/* In vblank? */
if (in_vbl)
ret |= DRM_SCANOUTPOS_INVBL;
return ret;
}
static int i915_get_vblank_timestamp(struct drm_device *dev, int pipe,
int *max_error,
struct timeval *vblank_time,
unsigned flags)
{
struct drm_crtc *crtc;
if (pipe < 0 || pipe >= INTEL_INFO(dev)->num_pipes) {
DRM_ERROR("Invalid crtc %d\n", pipe);
return -EINVAL;
}
/* Get drm_crtc to timestamp: */
crtc = intel_get_crtc_for_pipe(dev, pipe);
if (crtc == NULL) {
DRM_ERROR("Invalid crtc %d\n", pipe);
return -EINVAL;
}
if (!crtc->enabled) {
DRM_DEBUG_KMS("crtc %d is disabled\n", pipe);
return -EBUSY;
}
/* Helper routine in DRM core does all the work: */
return drm_calc_vbltimestamp_from_scanoutpos(dev, pipe, max_error,
vblank_time, flags,
crtc);
}
static bool intel_hpd_irq_event(struct drm_device *dev,
struct drm_connector *connector)
{
enum drm_connector_status old_status;
WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
old_status = connector->status;
connector->status = connector->funcs->detect(connector, false);
if (old_status == connector->status)
return false;
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n",
connector->base.id,
drm_get_connector_name(connector),
drm_get_connector_status_name(old_status),
drm_get_connector_status_name(connector->status));
return true;
}
/*
* Handle hotplug events outside the interrupt handler proper.
*/
#define I915_REENABLE_HOTPLUG_DELAY (2*60*1000)
static void i915_hotplug_work_func(struct work_struct *work)
{
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
hotplug_work);
struct drm_device *dev = dev_priv->dev;
struct drm_mode_config *mode_config = &dev->mode_config;
struct intel_connector *intel_connector;
struct intel_encoder *intel_encoder;
struct drm_connector *connector;
unsigned long irqflags;
bool hpd_disabled = false;
bool changed = false;
u32 hpd_event_bits;
/* HPD irq before everything is fully set up. */
if (!dev_priv->enable_hotplug_processing)
return;
mutex_lock(&mode_config->mutex);
DRM_DEBUG_KMS("running encoder hotplug functions\n");
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
hpd_event_bits = dev_priv->hpd_event_bits;
dev_priv->hpd_event_bits = 0;
list_for_each_entry(connector, &mode_config->connector_list, head) {
intel_connector = to_intel_connector(connector);
intel_encoder = intel_connector->encoder;
if (intel_encoder->hpd_pin > HPD_NONE &&
dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark == HPD_MARK_DISABLED &&
connector->polled == DRM_CONNECTOR_POLL_HPD) {
DRM_INFO("HPD interrupt storm detected on connector %s: "
"switching from hotplug detection to polling\n",
drm_get_connector_name(connector));
dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark = HPD_DISABLED;
connector->polled = DRM_CONNECTOR_POLL_CONNECT
| DRM_CONNECTOR_POLL_DISCONNECT;
hpd_disabled = true;
}
if (hpd_event_bits & (1 << intel_encoder->hpd_pin)) {
DRM_DEBUG_KMS("Connector %s (pin %i) received hotplug event.\n",
drm_get_connector_name(connector), intel_encoder->hpd_pin);
}
}
/* if there were no outputs to poll, poll was disabled,
* therefore make sure it's enabled when disabling HPD on
* some connectors */
if (hpd_disabled) {
drm_kms_helper_poll_enable(dev);
mod_timer(&dev_priv->hotplug_reenable_timer,
jiffies + msecs_to_jiffies(I915_REENABLE_HOTPLUG_DELAY));
}
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
list_for_each_entry(connector, &mode_config->connector_list, head) {
intel_connector = to_intel_connector(connector);
intel_encoder = intel_connector->encoder;
if (hpd_event_bits & (1 << intel_encoder->hpd_pin)) {
if (intel_encoder->hot_plug)
intel_encoder->hot_plug(intel_encoder);
if (intel_hpd_irq_event(dev, connector))
changed = true;
}
}
mutex_unlock(&mode_config->mutex);
if (changed)
drm_kms_helper_hotplug_event(dev);
}
static void ironlake_rps_change_irq_handler(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
u32 busy_up, busy_down, max_avg, min_avg;
u8 new_delay;
spin_lock(&mchdev_lock);
I915_WRITE16(MEMINTRSTS, I915_READ(MEMINTRSTS));
new_delay = dev_priv->ips.cur_delay;
I915_WRITE16(MEMINTRSTS, MEMINT_EVAL_CHG);
busy_up = I915_READ(RCPREVBSYTUPAVG);
busy_down = I915_READ(RCPREVBSYTDNAVG);
max_avg = I915_READ(RCBMAXAVG);
min_avg = I915_READ(RCBMINAVG);
/* Handle RCS change request from hw */
if (busy_up > max_avg) {
if (dev_priv->ips.cur_delay != dev_priv->ips.max_delay)
new_delay = dev_priv->ips.cur_delay - 1;
if (new_delay < dev_priv->ips.max_delay)
new_delay = dev_priv->ips.max_delay;
} else if (busy_down < min_avg) {
if (dev_priv->ips.cur_delay != dev_priv->ips.min_delay)
new_delay = dev_priv->ips.cur_delay + 1;
if (new_delay > dev_priv->ips.min_delay)
new_delay = dev_priv->ips.min_delay;
}
if (ironlake_set_drps(dev, new_delay))
dev_priv->ips.cur_delay = new_delay;
spin_unlock(&mchdev_lock);
return;
}
static void notify_ring(struct drm_device *dev,
struct intel_ring_buffer *ring)
{
if (ring->obj == NULL)
return;
trace_i915_gem_request_complete(ring);
wake_up_all(&ring->irq_queue);
i915_queue_hangcheck(dev);
}
static void gen6_pm_rps_work(struct work_struct *work)
{
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
rps.work);
u32 pm_iir;
u8 new_delay;
spin_lock_irq(&dev_priv->irq_lock);
pm_iir = dev_priv->rps.pm_iir;
dev_priv->rps.pm_iir = 0;
drm/i915: make PM interrupt writes non-destructive PM interrupts have an expanded role on HSW. It helps route the EBOX interrupts. This patch is necessary to make the existing code which touches the mask, and enable registers more friendly to other code paths that also will need these registers. To be more explicit: At preinstall all interrupts are masked and disabled. This implies that preinstall should always happen before any enabling/disabling of RPS or other interrupts. The PMIMR is touched by the workqueue, so enable/disable touch IER and IIR. Similarly, the code currently expects IMR has no use outside of the RPS related interrupts so they unconditionally set 0, or ~0. We could use IER in the workqueue, and IMR elsewhere, but since the workqueue use-case is more transient the existing usage makes sense. Disable RPS events: IER := IER & ~GEN6_PM_RPS_EVENTS // Disable RPS related interrupts IIR := GEN6_PM_RPS_EVENTS // Disable any outstanding interrupts Enable RPS events: IER := IER | GEN6_PM_RPS_EVENTS // Enable the RPS related interrupts IIR := GEN6_PM_RPS_EVENTS // Make sure there were no leftover events (really shouldn't happen) v2: Shouldn't destroy PMIIR or PMIMR VEBOX interrupt state in enable/disable rps functions (Haihao) v3: Bug found by Chris where we were clearing the wrong bits at rps disable. expanded commit message v4: v3 was based off the wrong branch v5: Added the setting of PMIMR because of previous patch update CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-29 10:22:27 +08:00
/* Make sure not to corrupt PMIMR state used by ringbuffer code */
snb_enable_pm_irq(dev_priv, GEN6_PM_RPS_EVENTS);
spin_unlock_irq(&dev_priv->irq_lock);
/* Make sure we didn't queue anything we're not going to process. */
WARN_ON(pm_iir & ~GEN6_PM_RPS_EVENTS);
drm/i915: make PM interrupt writes non-destructive PM interrupts have an expanded role on HSW. It helps route the EBOX interrupts. This patch is necessary to make the existing code which touches the mask, and enable registers more friendly to other code paths that also will need these registers. To be more explicit: At preinstall all interrupts are masked and disabled. This implies that preinstall should always happen before any enabling/disabling of RPS or other interrupts. The PMIMR is touched by the workqueue, so enable/disable touch IER and IIR. Similarly, the code currently expects IMR has no use outside of the RPS related interrupts so they unconditionally set 0, or ~0. We could use IER in the workqueue, and IMR elsewhere, but since the workqueue use-case is more transient the existing usage makes sense. Disable RPS events: IER := IER & ~GEN6_PM_RPS_EVENTS // Disable RPS related interrupts IIR := GEN6_PM_RPS_EVENTS // Disable any outstanding interrupts Enable RPS events: IER := IER | GEN6_PM_RPS_EVENTS // Enable the RPS related interrupts IIR := GEN6_PM_RPS_EVENTS // Make sure there were no leftover events (really shouldn't happen) v2: Shouldn't destroy PMIIR or PMIMR VEBOX interrupt state in enable/disable rps functions (Haihao) v3: Bug found by Chris where we were clearing the wrong bits at rps disable. expanded commit message v4: v3 was based off the wrong branch v5: Added the setting of PMIMR because of previous patch update CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-29 10:22:27 +08:00
if ((pm_iir & GEN6_PM_RPS_EVENTS) == 0)
return;
mutex_lock(&dev_priv->rps.hw_lock);
if (pm_iir & GEN6_PM_RP_UP_THRESHOLD) {
new_delay = dev_priv->rps.cur_delay + 1;
/*
* For better performance, jump directly
* to RPe if we're below it.
*/
if (IS_VALLEYVIEW(dev_priv->dev) &&
dev_priv->rps.cur_delay < dev_priv->rps.rpe_delay)
new_delay = dev_priv->rps.rpe_delay;
} else
new_delay = dev_priv->rps.cur_delay - 1;
/* sysfs frequency interfaces may have snuck in while servicing the
* interrupt
*/
if (new_delay >= dev_priv->rps.min_delay &&
new_delay <= dev_priv->rps.max_delay) {
if (IS_VALLEYVIEW(dev_priv->dev))
valleyview_set_rps(dev_priv->dev, new_delay);
else
gen6_set_rps(dev_priv->dev, new_delay);
}
mutex_unlock(&dev_priv->rps.hw_lock);
}
/**
* ivybridge_parity_work - Workqueue called when a parity error interrupt
* occurred.
* @work: workqueue struct
*
* Doesn't actually do anything except notify userspace. As a consequence of
* this event, userspace should try to remap the bad rows since statistically
* it is likely the same row is more likely to go bad again.
*/
static void ivybridge_parity_work(struct work_struct *work)
{
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
l3_parity.error_work);
u32 error_status, row, bank, subbank;
char *parity_event[6];
uint32_t misccpctl;
unsigned long flags;
uint8_t slice = 0;
/* We must turn off DOP level clock gating to access the L3 registers.
* In order to prevent a get/put style interface, acquire struct mutex
* any time we access those registers.
*/
mutex_lock(&dev_priv->dev->struct_mutex);
/* If we've screwed up tracking, just let the interrupt fire again */
if (WARN_ON(!dev_priv->l3_parity.which_slice))
goto out;
misccpctl = I915_READ(GEN7_MISCCPCTL);
I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE);
POSTING_READ(GEN7_MISCCPCTL);
while ((slice = ffs(dev_priv->l3_parity.which_slice)) != 0) {
u32 reg;
slice--;
if (WARN_ON_ONCE(slice >= NUM_L3_SLICES(dev_priv->dev)))
break;
dev_priv->l3_parity.which_slice &= ~(1<<slice);
reg = GEN7_L3CDERRST1 + (slice * 0x200);
error_status = I915_READ(reg);
row = GEN7_PARITY_ERROR_ROW(error_status);
bank = GEN7_PARITY_ERROR_BANK(error_status);
subbank = GEN7_PARITY_ERROR_SUBBANK(error_status);
I915_WRITE(reg, GEN7_PARITY_ERROR_VALID | GEN7_L3CDERRST1_ENABLE);
POSTING_READ(reg);
parity_event[0] = I915_L3_PARITY_UEVENT "=1";
parity_event[1] = kasprintf(GFP_KERNEL, "ROW=%d", row);
parity_event[2] = kasprintf(GFP_KERNEL, "BANK=%d", bank);
parity_event[3] = kasprintf(GFP_KERNEL, "SUBBANK=%d", subbank);
parity_event[4] = kasprintf(GFP_KERNEL, "SLICE=%d", slice);
parity_event[5] = NULL;
kobject_uevent_env(&dev_priv->dev->primary->kdev.kobj,
KOBJ_CHANGE, parity_event);
DRM_DEBUG("Parity error: Slice = %d, Row = %d, Bank = %d, Sub bank = %d.\n",
slice, row, bank, subbank);
kfree(parity_event[4]);
kfree(parity_event[3]);
kfree(parity_event[2]);
kfree(parity_event[1]);
}
I915_WRITE(GEN7_MISCCPCTL, misccpctl);
out:
WARN_ON(dev_priv->l3_parity.which_slice);
spin_lock_irqsave(&dev_priv->irq_lock, flags);
ilk_enable_gt_irq(dev_priv, GT_PARITY_ERROR(dev_priv->dev));
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
mutex_unlock(&dev_priv->dev->struct_mutex);
}
static void ivybridge_parity_error_irq_handler(struct drm_device *dev, u32 iir)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
if (!HAS_L3_DPF(dev))
return;
spin_lock(&dev_priv->irq_lock);
ilk_disable_gt_irq(dev_priv, GT_PARITY_ERROR(dev));
spin_unlock(&dev_priv->irq_lock);
iir &= GT_PARITY_ERROR(dev);
if (iir & GT_RENDER_L3_PARITY_ERROR_INTERRUPT_S1)
dev_priv->l3_parity.which_slice |= 1 << 1;
if (iir & GT_RENDER_L3_PARITY_ERROR_INTERRUPT)
dev_priv->l3_parity.which_slice |= 1 << 0;
queue_work(dev_priv->wq, &dev_priv->l3_parity.error_work);
}
static void ilk_gt_irq_handler(struct drm_device *dev,
struct drm_i915_private *dev_priv,
u32 gt_iir)
{
if (gt_iir &
(GT_RENDER_USER_INTERRUPT | GT_RENDER_PIPECTL_NOTIFY_INTERRUPT))
notify_ring(dev, &dev_priv->ring[RCS]);
if (gt_iir & ILK_BSD_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[VCS]);
}
static void snb_gt_irq_handler(struct drm_device *dev,
struct drm_i915_private *dev_priv,
u32 gt_iir)
{
if (gt_iir &
(GT_RENDER_USER_INTERRUPT | GT_RENDER_PIPECTL_NOTIFY_INTERRUPT))
notify_ring(dev, &dev_priv->ring[RCS]);
if (gt_iir & GT_BSD_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[VCS]);
if (gt_iir & GT_BLT_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[BCS]);
if (gt_iir & (GT_BLT_CS_ERROR_INTERRUPT |
GT_BSD_CS_ERROR_INTERRUPT |
GT_RENDER_CS_MASTER_ERROR_INTERRUPT)) {
DRM_ERROR("GT error interrupt 0x%08x\n", gt_iir);
i915_handle_error(dev, false);
}
if (gt_iir & GT_PARITY_ERROR(dev))
ivybridge_parity_error_irq_handler(dev, gt_iir);
}
2013-04-16 19:36:54 +08:00
#define HPD_STORM_DETECT_PERIOD 1000
#define HPD_STORM_THRESHOLD 5
static inline void intel_hpd_irq_handler(struct drm_device *dev,
u32 hotplug_trigger,
const u32 *hpd)
2013-04-16 19:36:54 +08:00
{
drm_i915_private_t *dev_priv = dev->dev_private;
int i;
bool storm_detected = false;
2013-04-16 19:36:54 +08:00
if (!hotplug_trigger)
return;
spin_lock(&dev_priv->irq_lock);
2013-04-16 19:36:54 +08:00
for (i = 1; i < HPD_NUM_PINS; i++) {
WARN(((hpd[i] & hotplug_trigger) &&
dev_priv->hpd_stats[i].hpd_mark != HPD_ENABLED),
"Received HPD interrupt although disabled\n");
2013-04-16 19:36:54 +08:00
if (!(hpd[i] & hotplug_trigger) ||
dev_priv->hpd_stats[i].hpd_mark != HPD_ENABLED)
continue;
dev_priv->hpd_event_bits |= (1 << i);
2013-04-16 19:36:54 +08:00
if (!time_in_range(jiffies, dev_priv->hpd_stats[i].hpd_last_jiffies,
dev_priv->hpd_stats[i].hpd_last_jiffies
+ msecs_to_jiffies(HPD_STORM_DETECT_PERIOD))) {
dev_priv->hpd_stats[i].hpd_last_jiffies = jiffies;
dev_priv->hpd_stats[i].hpd_cnt = 0;
DRM_DEBUG_KMS("Received HPD interrupt on PIN %d - cnt: 0\n", i);
2013-04-16 19:36:54 +08:00
} else if (dev_priv->hpd_stats[i].hpd_cnt > HPD_STORM_THRESHOLD) {
dev_priv->hpd_stats[i].hpd_mark = HPD_MARK_DISABLED;
dev_priv->hpd_event_bits &= ~(1 << i);
2013-04-16 19:36:54 +08:00
DRM_DEBUG_KMS("HPD interrupt storm detected on PIN %d\n", i);
storm_detected = true;
2013-04-16 19:36:54 +08:00
} else {
dev_priv->hpd_stats[i].hpd_cnt++;
DRM_DEBUG_KMS("Received HPD interrupt on PIN %d - cnt: %d\n", i,
dev_priv->hpd_stats[i].hpd_cnt);
2013-04-16 19:36:54 +08:00
}
}
if (storm_detected)
dev_priv->display.hpd_irq_setup(dev);
spin_unlock(&dev_priv->irq_lock);
drm/i915: fix hpd work vs. flush_work in the pageflip code deadlock Historically we've run our own driver hotplug handling in our own work-queue, which then launched the drm core hotplug handling in the system workqueue. This is important since we flush our own driver workqueue in the pageflip code while hodling modeset locks, and only the drm hotplug code grabbed these locks. But with commit 69787f7da6b2adc4054357a661aaa1701a9ca76f Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Oct 23 18:23:34 2012 +0000 drm: run the hpd irq event code directly this was changed and now we could deadlock in our flip handler if there's a hotplug work blocking the progress of the crucial unpin works. So this broke the careful deadlock avoidance implemented in commit b4a98e57fc27854b5938fc8b08b68e5e68b91e1f Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Nov 1 09:26:26 2012 +0000 drm/i915: Flush outstanding unpin tasks before pageflipping Since the rule thus far has been that work items on our own workqueue may never grab modeset locks simply restore that rule again. v2: Add a comment to the declaration of dev_priv->wq to warn readers about the tricky implications of using it. Suggested by Chris Wilson. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Stuart Abercrombie <sabercrombie@chromium.org> Reported-by: Stuart Abercrombie <sabercrombie@chromium.org> References: http://permalink.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/26239 Cc: stable@vger.kernel.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Squash in a comment at the place where we schedule the work. Requested after-the-fact by Chris on irc since the hpd work isn't the only place we botch this.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-02 22:22:25 +08:00
/*
* Our hotplug handler can grab modeset locks (by calling down into the
* fb helpers). Hence it must not be run on our own dev-priv->wq work
* queue for otherwise the flush_work in the pageflip code will
* deadlock.
*/
schedule_work(&dev_priv->hotplug_work);
2013-04-16 19:36:54 +08:00
}
static void gmbus_irq_handler(struct drm_device *dev)
{
drm/i915: use the gmbus irq for waits We need two special things to properly wire this up: - Add another argument to gmbus_wait_hw_status to pass in the correct interrupt bit in gmbus4. - Since we can only get an irq for one of the two events we want, hand-roll the wait_event_timeout code so that we wake up every jiffie and can check for NAKs. This way we also subsume gmbus support for platforms without interrupts (or where those are not yet enabled). The important bit really is to only enable one gmbus interrupt source at the same time - with that piece of lore figured out, this seems to work flawlessly. Ben Widawsky rightfully complained the lack of measurements for the claimed benefits (especially since the first version was actually broken and fell back to bit-banging). Previously reading the 256 byte hdmi EDID takes about 72 ms here. With this patch it's down to 33 ms. Given that transfering the 256 bytes over i2c at wire speed takes 20.5ms alone, the reduction in additional overhead is rather nice. v2: Chris Wilson wondered whether GMBUS4 might contain some set bits when booting up an hence result in some spurious interrupts. Since we clear GMBUS4 after every wait and we do gmbus transfer really early in the setup sequence to detect displays the window is small, but still be paranoid and clear it properly. v3: Clarify the comment that gmbus irq generation can only support one kind of event, why it bothers us and how we work around that limit. Cc: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-01 20:53:45 +08:00
struct drm_i915_private *dev_priv = (drm_i915_private_t *) dev->dev_private;
wake_up_all(&dev_priv->gmbus_wait_queue);
}
static void dp_aux_irq_handler(struct drm_device *dev)
{
drm/i915: irq-drive the dp aux communication At least on the platforms that have a dp aux irq and also have it enabled - vlvhsw should have one, too. But I don't have a machine to test this on. Judging from docs there's no dp aux interrupt for gm45. Also, I only have an ivb cpu edp machine, so the dp aux A code for snb/ilk is untested. For dpcd probing when nothing is connected it slashes about 5ms of cpu time (cpu time is now negligible), which agrees with 3 * 5 400 usec timeouts. A previous version of this patch increases the time required to go through the dp_detect cycle (which includes reading the edid) from around 33 ms to around 40 ms. Experiments indicated that this is purely due to the irq latency - the hw doesn't allow us to queue up dp aux transactions and hence irq latency directly affects throughput. gmbus is much better, there we have a 8 byte buffer, and we get the irq once another 4 bytes can be queued up. But by using the pm_qos interface to request the lowest possible cpu wake-up latency this slowdown completely disappeared. Since all our output detection logic is single-threaded with the mode_config mutex right now anyway, I've decide not ot play fancy and to just reuse the gmbus wait queue. But this would definitely prep the way to run dp detection on different ports in parallel v2: Add a timeout for dp aux transfers when using interrupts - the hw _does_ prevent this with the hw-based 400 usec timeout, but if the irq somehow doesn't arrive we're screwed. Lesson learned while developing this ;-) v3: While at it also convert the busy-loop to wait_for_atomic, so that we don't run the risk of an infinite loop any more. v4: Ensure we have the smallest possible irq latency by using the pm_qos interface. v5: Add a comment to the code to explain why we frob pm_qos. Suggested by Chris Wilson. v6: Disable dp irq for vlv, that's easier than trying to get at docs and hw. v7: Squash in a fix for Haswell that Paulo Zanoni tracked down - the dp aux registers aren't at a fixed offset any more, but can be on the PCH while the DP port is on the cpu die. Reviewed-by: Imre Deak <imre.deak@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-01 20:53:48 +08:00
struct drm_i915_private *dev_priv = (drm_i915_private_t *) dev->dev_private;
wake_up_all(&dev_priv->gmbus_wait_queue);
}
/* The RPS events need forcewake, so we add them to a work queue and mask their
* IMR bits until the work is done. Other interrupts can be processed without
* the work queue. */
static void gen6_rps_irq_handler(struct drm_i915_private *dev_priv, u32 pm_iir)
{
if (pm_iir & GEN6_PM_RPS_EVENTS) {
spin_lock(&dev_priv->irq_lock);
dev_priv->rps.pm_iir |= pm_iir & GEN6_PM_RPS_EVENTS;
drm/i915: fix how we mask PMIMR when adding work to the queue It seems we've been doing this ever since we started processing the RPS events on a work queue, on commit "drm/i915: move gen6 rps handling to workqueue", 4912d04193733a825216b926ffd290fada88ab07. The problem is: when we add work to the queue, instead of just masking the bits we queued and leaving all the others on their current state, we mask the bits we queued and unmask all the others. This basically means we'll be unmasking a bunch of interrupts we're not going to process. And if you look at gen6_pm_rps_work, we unmask back only GEN6_PM_RPS_EVENTS, which means the bits we unmasked when adding work to the queue will remain unmasked after we process the queue. Notice that even though we unmask those unrelated interrupts, we never enable them on IER, so they don't fire our interrupt handler, they just stay there on IIR waiting to be cleared when something else triggers the interrupt handler. So this patch does what seems to make more sense: mask only the bits we add to the queue, without unmasking anything else, and so we'll unmask them after we process the queue. As a side effect we also have to remove that WARN, because it is not only making sure we don't mask useful interrupts, it is also making sure we do unmask useless interrupts! That piece of code should not be responsible for knowing which bits should be unmasked, so just don't assert anything, and trust that snb_disable_pm_irq should be doing the right thing. With i915.enable_pc8=1 I was getting ocasional "GEN6_PMIIR is not 0" error messages due to the fact that we unmask those unrelated interrupts but don't enable them. Note: if bugs start bisecting to this patch, then it probably means someone was relying on the fact that we unmask everything by accident, then we should fix gen5_gt_irq_postinstall or whoever needs the accidentally unmasked interrupts. Or maybe I was just wrong and we need to revert this patch :) Note: This started to be a more real issue with the addition of the VEBOX support since now we do enable more than just the minimal set of RPS interrupts in the IER register. Which means after the first rps interrupt has happened we will never mask the VEBOX user interrupts again and so will blow through cpu time needlessly when running video workloads. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Add note that this started to matter with VEBOX much more.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-10 04:04:36 +08:00
snb_disable_pm_irq(dev_priv, pm_iir & GEN6_PM_RPS_EVENTS);
spin_unlock(&dev_priv->irq_lock);
queue_work(dev_priv->wq, &dev_priv->rps.work);
}
if (HAS_VEBOX(dev_priv->dev)) {
if (pm_iir & PM_VEBOX_USER_INTERRUPT)
notify_ring(dev_priv->dev, &dev_priv->ring[VECS]);
if (pm_iir & PM_VEBOX_CS_ERROR_INTERRUPT) {
DRM_ERROR("VEBOX CS error interrupt 0x%08x\n", pm_iir);
i915_handle_error(dev_priv->dev, false);
}
}
}
static irqreturn_t valleyview_irq_handler(int irq, void *arg)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 iir, gt_iir, pm_iir;
irqreturn_t ret = IRQ_NONE;
unsigned long irqflags;
int pipe;
u32 pipe_stats[I915_MAX_PIPES];
atomic_inc(&dev_priv->irq_received);
while (true) {
iir = I915_READ(VLV_IIR);
gt_iir = I915_READ(GTIIR);
pm_iir = I915_READ(GEN6_PMIIR);
if (gt_iir == 0 && pm_iir == 0 && iir == 0)
goto out;
ret = IRQ_HANDLED;
snb_gt_irq_handler(dev, dev_priv, gt_iir);
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
for_each_pipe(pipe) {
int reg = PIPESTAT(pipe);
pipe_stats[pipe] = I915_READ(reg);
/*
* Clear the PIPE*STAT regs before the IIR
*/
if (pipe_stats[pipe] & 0x8000ffff) {
if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS)
DRM_DEBUG_DRIVER("pipe %c underrun\n",
pipe_name(pipe));
I915_WRITE(reg, pipe_stats[pipe]);
}
}
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
for_each_pipe(pipe) {
if (pipe_stats[pipe] & PIPE_VBLANK_INTERRUPT_STATUS)
drm_handle_vblank(dev, pipe);
if (pipe_stats[pipe] & PLANE_FLIPDONE_INT_STATUS_VLV) {
intel_prepare_page_flip(dev, pipe);
intel_finish_page_flip(dev, pipe);
}
}
/* Consume port. Then clear IIR or we'll miss events */
if (iir & I915_DISPLAY_PORT_INTERRUPT) {
u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
2013-04-16 19:36:54 +08:00
u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_I915;
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
hotplug_status);
intel_hpd_irq_handler(dev, hotplug_trigger, hpd_status_i915);
I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
I915_READ(PORT_HOTPLUG_STAT);
}
if (pipe_stats[0] & PIPE_GMBUS_INTERRUPT_STATUS)
gmbus_irq_handler(dev);
if (pm_iir)
gen6_rps_irq_handler(dev_priv, pm_iir);
I915_WRITE(GTIIR, gt_iir);
I915_WRITE(GEN6_PMIIR, pm_iir);
I915_WRITE(VLV_IIR, iir);
}
out:
return ret;
}
static void ibx_irq_handler(struct drm_device *dev, u32 pch_iir)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
2013-04-16 19:36:54 +08:00
u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK;
intel_hpd_irq_handler(dev, hotplug_trigger, hpd_ibx);
if (pch_iir & SDE_AUDIO_POWER_MASK) {
int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK) >>
SDE_AUDIO_POWER_SHIFT);
DRM_DEBUG_DRIVER("PCH audio power change on port %d\n",
port_name(port));
}
if (pch_iir & SDE_AUX_MASK)
dp_aux_irq_handler(dev);
if (pch_iir & SDE_GMBUS)
gmbus_irq_handler(dev);
if (pch_iir & SDE_AUDIO_HDCP_MASK)
DRM_DEBUG_DRIVER("PCH HDCP audio interrupt\n");
if (pch_iir & SDE_AUDIO_TRANS_MASK)
DRM_DEBUG_DRIVER("PCH transcoder audio interrupt\n");
if (pch_iir & SDE_POISON)
DRM_ERROR("PCH poison interrupt\n");
if (pch_iir & SDE_FDI_MASK)
for_each_pipe(pipe)
DRM_DEBUG_DRIVER(" pipe %c FDI IIR: 0x%08x\n",
pipe_name(pipe),
I915_READ(FDI_RX_IIR(pipe)));
if (pch_iir & (SDE_TRANSB_CRC_DONE | SDE_TRANSA_CRC_DONE))
DRM_DEBUG_DRIVER("PCH transcoder CRC done interrupt\n");
if (pch_iir & (SDE_TRANSB_CRC_ERR | SDE_TRANSA_CRC_ERR))
DRM_DEBUG_DRIVER("PCH transcoder CRC error interrupt\n");
if (pch_iir & SDE_TRANSA_FIFO_UNDER)
if (intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A,
false))
DRM_DEBUG_DRIVER("PCH transcoder A FIFO underrun\n");
if (pch_iir & SDE_TRANSB_FIFO_UNDER)
if (intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_B,
false))
DRM_DEBUG_DRIVER("PCH transcoder B FIFO underrun\n");
}
static void ivb_err_int_handler(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 err_int = I915_READ(GEN7_ERR_INT);
if (err_int & ERR_INT_POISON)
DRM_ERROR("Poison interrupt\n");
if (err_int & ERR_INT_FIFO_UNDERRUN_A)
if (intel_set_cpu_fifo_underrun_reporting(dev, PIPE_A, false))
DRM_DEBUG_DRIVER("Pipe A FIFO underrun\n");
if (err_int & ERR_INT_FIFO_UNDERRUN_B)
if (intel_set_cpu_fifo_underrun_reporting(dev, PIPE_B, false))
DRM_DEBUG_DRIVER("Pipe B FIFO underrun\n");
if (err_int & ERR_INT_FIFO_UNDERRUN_C)
if (intel_set_cpu_fifo_underrun_reporting(dev, PIPE_C, false))
DRM_DEBUG_DRIVER("Pipe C FIFO underrun\n");
I915_WRITE(GEN7_ERR_INT, err_int);
}
static void cpt_serr_int_handler(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 serr_int = I915_READ(SERR_INT);
if (serr_int & SERR_INT_POISON)
DRM_ERROR("PCH poison interrupt\n");
if (serr_int & SERR_INT_TRANS_A_FIFO_UNDERRUN)
if (intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A,
false))
DRM_DEBUG_DRIVER("PCH transcoder A FIFO underrun\n");
if (serr_int & SERR_INT_TRANS_B_FIFO_UNDERRUN)
if (intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_B,
false))
DRM_DEBUG_DRIVER("PCH transcoder B FIFO underrun\n");
if (serr_int & SERR_INT_TRANS_C_FIFO_UNDERRUN)
if (intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_C,
false))
DRM_DEBUG_DRIVER("PCH transcoder C FIFO underrun\n");
I915_WRITE(SERR_INT, serr_int);
}
static void cpt_irq_handler(struct drm_device *dev, u32 pch_iir)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
2013-04-16 19:36:54 +08:00
u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK_CPT;
intel_hpd_irq_handler(dev, hotplug_trigger, hpd_cpt);
if (pch_iir & SDE_AUDIO_POWER_MASK_CPT) {
int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK_CPT) >>
SDE_AUDIO_POWER_SHIFT_CPT);
DRM_DEBUG_DRIVER("PCH audio power change on port %c\n",
port_name(port));
}
if (pch_iir & SDE_AUX_MASK_CPT)
dp_aux_irq_handler(dev);
if (pch_iir & SDE_GMBUS_CPT)
gmbus_irq_handler(dev);
if (pch_iir & SDE_AUDIO_CP_REQ_CPT)
DRM_DEBUG_DRIVER("Audio CP request interrupt\n");
if (pch_iir & SDE_AUDIO_CP_CHG_CPT)
DRM_DEBUG_DRIVER("Audio CP change interrupt\n");
if (pch_iir & SDE_FDI_MASK_CPT)
for_each_pipe(pipe)
DRM_DEBUG_DRIVER(" pipe %c FDI IIR: 0x%08x\n",
pipe_name(pipe),
I915_READ(FDI_RX_IIR(pipe)));
if (pch_iir & SDE_ERROR_CPT)
cpt_serr_int_handler(dev);
}
static void ilk_display_irq_handler(struct drm_device *dev, u32 de_iir)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (de_iir & DE_AUX_CHANNEL_A)
dp_aux_irq_handler(dev);
if (de_iir & DE_GSE)
intel_opregion_asle_intr(dev);
if (de_iir & DE_PIPEA_VBLANK)
drm_handle_vblank(dev, 0);
if (de_iir & DE_PIPEB_VBLANK)
drm_handle_vblank(dev, 1);
if (de_iir & DE_POISON)
DRM_ERROR("Poison interrupt\n");
if (de_iir & DE_PIPEA_FIFO_UNDERRUN)
if (intel_set_cpu_fifo_underrun_reporting(dev, PIPE_A, false))
DRM_DEBUG_DRIVER("Pipe A FIFO underrun\n");
if (de_iir & DE_PIPEB_FIFO_UNDERRUN)
if (intel_set_cpu_fifo_underrun_reporting(dev, PIPE_B, false))
DRM_DEBUG_DRIVER("Pipe B FIFO underrun\n");
if (de_iir & DE_PLANEA_FLIP_DONE) {
intel_prepare_page_flip(dev, 0);
intel_finish_page_flip_plane(dev, 0);
}
if (de_iir & DE_PLANEB_FLIP_DONE) {
intel_prepare_page_flip(dev, 1);
intel_finish_page_flip_plane(dev, 1);
}
/* check event from PCH */
if (de_iir & DE_PCH_EVENT) {
u32 pch_iir = I915_READ(SDEIIR);
if (HAS_PCH_CPT(dev))
cpt_irq_handler(dev, pch_iir);
else
ibx_irq_handler(dev, pch_iir);
/* should clear PCH hotplug event before clear CPU irq */
I915_WRITE(SDEIIR, pch_iir);
}
if (IS_GEN5(dev) && de_iir & DE_PCU_EVENT)
ironlake_rps_change_irq_handler(dev);
}
static void ivb_display_irq_handler(struct drm_device *dev, u32 de_iir)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int i;
if (de_iir & DE_ERR_INT_IVB)
ivb_err_int_handler(dev);
if (de_iir & DE_AUX_CHANNEL_A_IVB)
dp_aux_irq_handler(dev);
if (de_iir & DE_GSE_IVB)
intel_opregion_asle_intr(dev);
for (i = 0; i < 3; i++) {
if (de_iir & (DE_PIPEA_VBLANK_IVB << (5 * i)))
drm_handle_vblank(dev, i);
if (de_iir & (DE_PLANEA_FLIP_DONE_IVB << (5 * i))) {
intel_prepare_page_flip(dev, i);
intel_finish_page_flip_plane(dev, i);
}
}
/* check event from PCH */
if (!HAS_PCH_NOP(dev) && (de_iir & DE_PCH_EVENT_IVB)) {
u32 pch_iir = I915_READ(SDEIIR);
cpt_irq_handler(dev, pch_iir);
/* clear PCH hotplug event before clear CPU irq */
I915_WRITE(SDEIIR, pch_iir);
}
}
static irqreturn_t ironlake_irq_handler(int irq, void *arg)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 de_iir, gt_iir, de_ier, sde_ier = 0;
irqreturn_t ret = IRQ_NONE;
atomic_inc(&dev_priv->irq_received);
/* We get interrupts on unclaimed registers, so check for this before we
* do any I915_{READ,WRITE}. */
intel_uncore_check_errors(dev);
/* disable master interrupt before clearing iir */
de_ier = I915_READ(DEIER);
I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL);
POSTING_READ(DEIER);
drm/i915: also disable south interrupts when handling them From the docs: "IIR can queue up to two interrupt events. When the IIR is cleared, it will set itself again after one clock if a second event was stored." "Only the rising edge of the PCH Display interrupt will cause the North Display IIR (DEIIR) PCH Display Interrupt even bit to be set, so all PCH Display Interrupts, including back to back interrupts, must be cleared before a new PCH Display interrupt can cause DEIIR to be set". The current code works fine because we don't get many interrupts, but if we enable the PCH FIFO underrun interrupts we'll start getting so many interrupts that at some point new PCH interrupts won't cause DEIIR to be set. The initial implementation I tried was to turn the code that checks SDEIIR into a loop, but we can still get interrupts even after the loop is done (and before the irq handler finishes), so we have to either disable the interrupts or mask them. In the end I concluded that just disabling the PCH interrupts is enough, you don't even need the loop, so this is what this patch implements. I've tested it and it passes the 2 "PCH FIFO underrun interrupt storms" I can reproduce: the "ironlake_crtc_disable" case and the "wrong watermarks" case. In other words, here's how to reproduce the problem fixed by this patch: 1 - Enable PCH FIFO underrun interrupts (SERR_INT on SNB+) 2 - Boot the machine 3 - While booting we'll get tons of PCH FIFO underrun interrupts 4 - Plug a new monitor 5 - Run xrandr, notice it won't detect the new monitor 6 - Read SDEIIR and notice it's not 0 while DEIIR is 0 Q: Can't we just clear DEIIR before SDEIIR? A: It doesn't work. SDEIIR has to be completely cleared (including the interrupts stored on its back queue) before it can flip DEIIR's bit to 1 again, and even while you're clearing it you'll be getting more and more interrupts. Q: Why does it work by just disabling+enabling the south interrupts? A: Because when we re-enable them, if there's something on the SDEIIR register (maybe an interrupt stored on the queue), the re-enabling will make DEIIR's bit flip to 1, and since we'll already have interrupts enabled we'll get another interrupt, then run our irq handler again to process the "back" interrupts. v2: Even bigger commit message, added code comments. Note that this fixes missed dp aux irqs which have been reported for 3.9-rc1. This regression has been introduced by switching to irq-driven dp aux transactions with commit 9ee32fea5fe810ec06af3a15e4c65478de56d4f5 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 13:53:48 2012 +0100 drm/i915: irq-drive the dp aux communication References: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg18588.html References: https://lkml.org/lkml/2013/2/26/769 Tested-by: Imre Deak <imre.deak@intel.com> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Pimp commit message with references for the dp aux irq timeout regression this fixes.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-23 04:05:28 +08:00
/* Disable south interrupts. We'll only write to SDEIIR once, so further
* interrupts will will be stored on its back queue, and then we'll be
* able to process them after we restore SDEIER (as soon as we restore
* it, we'll get an interrupt if SDEIIR still has something to process
* due to its back queue). */
if (!HAS_PCH_NOP(dev)) {
sde_ier = I915_READ(SDEIER);
I915_WRITE(SDEIER, 0);
POSTING_READ(SDEIER);
}
drm/i915: also disable south interrupts when handling them From the docs: "IIR can queue up to two interrupt events. When the IIR is cleared, it will set itself again after one clock if a second event was stored." "Only the rising edge of the PCH Display interrupt will cause the North Display IIR (DEIIR) PCH Display Interrupt even bit to be set, so all PCH Display Interrupts, including back to back interrupts, must be cleared before a new PCH Display interrupt can cause DEIIR to be set". The current code works fine because we don't get many interrupts, but if we enable the PCH FIFO underrun interrupts we'll start getting so many interrupts that at some point new PCH interrupts won't cause DEIIR to be set. The initial implementation I tried was to turn the code that checks SDEIIR into a loop, but we can still get interrupts even after the loop is done (and before the irq handler finishes), so we have to either disable the interrupts or mask them. In the end I concluded that just disabling the PCH interrupts is enough, you don't even need the loop, so this is what this patch implements. I've tested it and it passes the 2 "PCH FIFO underrun interrupt storms" I can reproduce: the "ironlake_crtc_disable" case and the "wrong watermarks" case. In other words, here's how to reproduce the problem fixed by this patch: 1 - Enable PCH FIFO underrun interrupts (SERR_INT on SNB+) 2 - Boot the machine 3 - While booting we'll get tons of PCH FIFO underrun interrupts 4 - Plug a new monitor 5 - Run xrandr, notice it won't detect the new monitor 6 - Read SDEIIR and notice it's not 0 while DEIIR is 0 Q: Can't we just clear DEIIR before SDEIIR? A: It doesn't work. SDEIIR has to be completely cleared (including the interrupts stored on its back queue) before it can flip DEIIR's bit to 1 again, and even while you're clearing it you'll be getting more and more interrupts. Q: Why does it work by just disabling+enabling the south interrupts? A: Because when we re-enable them, if there's something on the SDEIIR register (maybe an interrupt stored on the queue), the re-enabling will make DEIIR's bit flip to 1, and since we'll already have interrupts enabled we'll get another interrupt, then run our irq handler again to process the "back" interrupts. v2: Even bigger commit message, added code comments. Note that this fixes missed dp aux irqs which have been reported for 3.9-rc1. This regression has been introduced by switching to irq-driven dp aux transactions with commit 9ee32fea5fe810ec06af3a15e4c65478de56d4f5 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 13:53:48 2012 +0100 drm/i915: irq-drive the dp aux communication References: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg18588.html References: https://lkml.org/lkml/2013/2/26/769 Tested-by: Imre Deak <imre.deak@intel.com> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Pimp commit message with references for the dp aux irq timeout regression this fixes.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-23 04:05:28 +08:00
gt_iir = I915_READ(GTIIR);
if (gt_iir) {
if (INTEL_INFO(dev)->gen >= 6)
snb_gt_irq_handler(dev, dev_priv, gt_iir);
else
ilk_gt_irq_handler(dev, dev_priv, gt_iir);
I915_WRITE(GTIIR, gt_iir);
ret = IRQ_HANDLED;
}
de_iir = I915_READ(DEIIR);
if (de_iir) {
if (INTEL_INFO(dev)->gen >= 7)
ivb_display_irq_handler(dev, de_iir);
else
ilk_display_irq_handler(dev, de_iir);
I915_WRITE(DEIIR, de_iir);
ret = IRQ_HANDLED;
}
if (INTEL_INFO(dev)->gen >= 6) {
u32 pm_iir = I915_READ(GEN6_PMIIR);
if (pm_iir) {
gen6_rps_irq_handler(dev_priv, pm_iir);
I915_WRITE(GEN6_PMIIR, pm_iir);
ret = IRQ_HANDLED;
}
}
I915_WRITE(DEIER, de_ier);
POSTING_READ(DEIER);
if (!HAS_PCH_NOP(dev)) {
I915_WRITE(SDEIER, sde_ier);
POSTING_READ(SDEIER);
}
return ret;
}
drm/i915: fix wait_for_pending_flips vs gpu hang deadlock My g33 here seems to be shockingly good at hitting them all. This time around kms_flip/flip-vs-panning-vs-hang blows up: intel_crtc_wait_for_pending_flips correctly checks for gpu hangs and if a gpu hang is pending aborts the wait for outstanding flips so that the setcrtc call will succeed and release the crtc mutex. And the gpu hang handler needs that lock in intel_display_handle_reset to be able to complete outstanding flips. The problem is that we can race in two ways: - Waiters on the dev_priv->pending_flip_queue aren't woken up after we've the reset as pending, but before we actually start the reset work. This means that the waiter doesn't notice the pending reset and hence will keep on hogging the locks. Like with dev->struct_mutex and the ring->irq_queue wait queues we there need to wake up everyone that potentially holds a lock which the reset handler needs. - intel_display_handle_reset was called _after_ we've already signalled the completion of the reset work. Which means a waiter could sneak in, grab the lock and never release it (since the pageflips won't ever get released). Similar to resetting the gem state all the reset work must complete before we update the reset counter. Contrary to the gem reset we don't need to have a second explicit wake up call since that will have happened already when completing the pageflips. We also don't have any issues that the completion happens while the reset state is still pending - wait_for_pending_flips is only there to ensure we display the right frame. After a gpu hang&reset events such guarantees are out the window anyway. This is in contrast to the gem code where too-early wake-up would result in unnecessary restarting of ioctls. Also, since we've gotten these various deadlocks and ordering constraints wrong so often throw copious amounts of comments at the code. This deadlock regression has been introduced in the commit which added the pageflip reset logic to the gpu hang work: commit 96a02917a0131e52efefde49c2784c0421d6c439 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Mon Feb 18 19:08:49 2013 +0200 drm/i915: Finish page flips and update primary planes after a GPU reset v2: - Add comments to explain how the wake_up serves as memory barriers for the atomic_t reset counter. - Improve the comments a bit as suggested by Chris Wilson. - Extract the wake_up calls before/after the reset into a little i915_error_wake_up and unconditionally wake up the pending_flip_queue waiters, again as suggested by Chris Wilson. v3: Throw copious amounts of comments at i915_error_wake_up as suggested by Chris Wilson. Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-09 03:57:13 +08:00
static void i915_error_wake_up(struct drm_i915_private *dev_priv,
bool reset_completed)
{
struct intel_ring_buffer *ring;
int i;
/*
* Notify all waiters for GPU completion events that reset state has
* been changed, and that they need to restart their wait after
* checking for potential errors (and bail out to drop locks if there is
* a gpu reset pending so that i915_error_work_func can acquire them).
*/
/* Wake up __wait_seqno, potentially holding dev->struct_mutex. */
for_each_ring(ring, dev_priv, i)
wake_up_all(&ring->irq_queue);
/* Wake up intel_crtc_wait_for_pending_flips, holding crtc->mutex. */
wake_up_all(&dev_priv->pending_flip_queue);
/*
* Signal tasks blocked in i915_gem_wait_for_error that the pending
* reset state is cleared.
*/
if (reset_completed)
wake_up_all(&dev_priv->gpu_error.reset_queue);
}
/**
* i915_error_work_func - do process context error handling work
* @work: work struct
*
* Fire an error uevent so userspace can see that a hang or error
* was detected.
*/
static void i915_error_work_func(struct work_struct *work)
{
drm/i915: clear up wedged transitions We have two important transitions of the wedged state in the current code: - 0 -> 1: This means a hang has been detected, and signals to everyone that they please get of any locks, so that the reset work item can do its job. - 1 -> 0: The reset handler has completed. Now the last transition mixes up two states: "Reset completed and successful" and "Reset failed". To distinguish these two we do some tricks with the reset completion, but I simply could not convince myself that this doesn't race under odd circumstances. Hence split this up, and add a new terminal state indicating that the hw is gone for good. Also add explicit #defines for both states, update comments. v2: Split out the reset handling bugfix for the throttle ioctl. v3: s/tmp/wedged/ sugested by Chris Wilson. Also fixup up a rebase error which prevented this patch from actually compiling. v4: To unify the wedged state with the reset counter, keep the reset-in-progress state just as a flag. The terminally-wedged state is now denoted with a big number. v5: Add a comment to the reset_counter special values explaining that WEDGED & RESET_IN_PROGRESS needs to be true for the code to be correct. v6: Fixup logic errors introduced with the wedged+reset_counter unification. Since WEDGED implies reset-in-progress (in a way we're terminally stuck in the dead-but-reset-not-completed state), we need ensure that we check for this everywhere. The specific bug was in wait_for_error, which would simply have timed out. v7: Extract an inline i915_reset_in_progress helper to make the code more readable. Also annote the reset-in-progress case with an unlikely, to help the compiler optimize the fastpath. Do the same for the terminally wedged case with i915_terminally_wedged. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-16 00:17:22 +08:00
struct i915_gpu_error *error = container_of(work, struct i915_gpu_error,
work);
drm_i915_private_t *dev_priv = container_of(error, drm_i915_private_t,
gpu_error);
struct drm_device *dev = dev_priv->dev;
char *error_event[] = { I915_ERROR_UEVENT "=1", NULL };
char *reset_event[] = { I915_RESET_UEVENT "=1", NULL };
char *reset_done_event[] = { I915_ERROR_UEVENT "=0", NULL };
drm/i915: fix wait_for_pending_flips vs gpu hang deadlock My g33 here seems to be shockingly good at hitting them all. This time around kms_flip/flip-vs-panning-vs-hang blows up: intel_crtc_wait_for_pending_flips correctly checks for gpu hangs and if a gpu hang is pending aborts the wait for outstanding flips so that the setcrtc call will succeed and release the crtc mutex. And the gpu hang handler needs that lock in intel_display_handle_reset to be able to complete outstanding flips. The problem is that we can race in two ways: - Waiters on the dev_priv->pending_flip_queue aren't woken up after we've the reset as pending, but before we actually start the reset work. This means that the waiter doesn't notice the pending reset and hence will keep on hogging the locks. Like with dev->struct_mutex and the ring->irq_queue wait queues we there need to wake up everyone that potentially holds a lock which the reset handler needs. - intel_display_handle_reset was called _after_ we've already signalled the completion of the reset work. Which means a waiter could sneak in, grab the lock and never release it (since the pageflips won't ever get released). Similar to resetting the gem state all the reset work must complete before we update the reset counter. Contrary to the gem reset we don't need to have a second explicit wake up call since that will have happened already when completing the pageflips. We also don't have any issues that the completion happens while the reset state is still pending - wait_for_pending_flips is only there to ensure we display the right frame. After a gpu hang&reset events such guarantees are out the window anyway. This is in contrast to the gem code where too-early wake-up would result in unnecessary restarting of ioctls. Also, since we've gotten these various deadlocks and ordering constraints wrong so often throw copious amounts of comments at the code. This deadlock regression has been introduced in the commit which added the pageflip reset logic to the gpu hang work: commit 96a02917a0131e52efefde49c2784c0421d6c439 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Mon Feb 18 19:08:49 2013 +0200 drm/i915: Finish page flips and update primary planes after a GPU reset v2: - Add comments to explain how the wake_up serves as memory barriers for the atomic_t reset counter. - Improve the comments a bit as suggested by Chris Wilson. - Extract the wake_up calls before/after the reset into a little i915_error_wake_up and unconditionally wake up the pending_flip_queue waiters, again as suggested by Chris Wilson. v3: Throw copious amounts of comments at i915_error_wake_up as suggested by Chris Wilson. Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-09 03:57:13 +08:00
int ret;
kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, error_event);
/*
* Note that there's only one work item which does gpu resets, so we
* need not worry about concurrent gpu resets potentially incrementing
* error->reset_counter twice. We only need to take care of another
* racing irq/hangcheck declaring the gpu dead for a second time. A
* quick check for that is good enough: schedule_work ensures the
* correct ordering between hang detection and this work item, and since
* the reset in-progress bit is only ever set by code outside of this
* work we don't need to worry about any other races.
*/
if (i915_reset_in_progress(error) && !i915_terminally_wedged(error)) {
DRM_DEBUG_DRIVER("resetting chip\n");
kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE,
reset_event);
drm/i915: clear up wedged transitions We have two important transitions of the wedged state in the current code: - 0 -> 1: This means a hang has been detected, and signals to everyone that they please get of any locks, so that the reset work item can do its job. - 1 -> 0: The reset handler has completed. Now the last transition mixes up two states: "Reset completed and successful" and "Reset failed". To distinguish these two we do some tricks with the reset completion, but I simply could not convince myself that this doesn't race under odd circumstances. Hence split this up, and add a new terminal state indicating that the hw is gone for good. Also add explicit #defines for both states, update comments. v2: Split out the reset handling bugfix for the throttle ioctl. v3: s/tmp/wedged/ sugested by Chris Wilson. Also fixup up a rebase error which prevented this patch from actually compiling. v4: To unify the wedged state with the reset counter, keep the reset-in-progress state just as a flag. The terminally-wedged state is now denoted with a big number. v5: Add a comment to the reset_counter special values explaining that WEDGED & RESET_IN_PROGRESS needs to be true for the code to be correct. v6: Fixup logic errors introduced with the wedged+reset_counter unification. Since WEDGED implies reset-in-progress (in a way we're terminally stuck in the dead-but-reset-not-completed state), we need ensure that we check for this everywhere. The specific bug was in wait_for_error, which would simply have timed out. v7: Extract an inline i915_reset_in_progress helper to make the code more readable. Also annote the reset-in-progress case with an unlikely, to help the compiler optimize the fastpath. Do the same for the terminally wedged case with i915_terminally_wedged. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-16 00:17:22 +08:00
drm/i915: fix wait_for_pending_flips vs gpu hang deadlock My g33 here seems to be shockingly good at hitting them all. This time around kms_flip/flip-vs-panning-vs-hang blows up: intel_crtc_wait_for_pending_flips correctly checks for gpu hangs and if a gpu hang is pending aborts the wait for outstanding flips so that the setcrtc call will succeed and release the crtc mutex. And the gpu hang handler needs that lock in intel_display_handle_reset to be able to complete outstanding flips. The problem is that we can race in two ways: - Waiters on the dev_priv->pending_flip_queue aren't woken up after we've the reset as pending, but before we actually start the reset work. This means that the waiter doesn't notice the pending reset and hence will keep on hogging the locks. Like with dev->struct_mutex and the ring->irq_queue wait queues we there need to wake up everyone that potentially holds a lock which the reset handler needs. - intel_display_handle_reset was called _after_ we've already signalled the completion of the reset work. Which means a waiter could sneak in, grab the lock and never release it (since the pageflips won't ever get released). Similar to resetting the gem state all the reset work must complete before we update the reset counter. Contrary to the gem reset we don't need to have a second explicit wake up call since that will have happened already when completing the pageflips. We also don't have any issues that the completion happens while the reset state is still pending - wait_for_pending_flips is only there to ensure we display the right frame. After a gpu hang&reset events such guarantees are out the window anyway. This is in contrast to the gem code where too-early wake-up would result in unnecessary restarting of ioctls. Also, since we've gotten these various deadlocks and ordering constraints wrong so often throw copious amounts of comments at the code. This deadlock regression has been introduced in the commit which added the pageflip reset logic to the gpu hang work: commit 96a02917a0131e52efefde49c2784c0421d6c439 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Mon Feb 18 19:08:49 2013 +0200 drm/i915: Finish page flips and update primary planes after a GPU reset v2: - Add comments to explain how the wake_up serves as memory barriers for the atomic_t reset counter. - Improve the comments a bit as suggested by Chris Wilson. - Extract the wake_up calls before/after the reset into a little i915_error_wake_up and unconditionally wake up the pending_flip_queue waiters, again as suggested by Chris Wilson. v3: Throw copious amounts of comments at i915_error_wake_up as suggested by Chris Wilson. Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-09 03:57:13 +08:00
/*
* All state reset _must_ be completed before we update the
* reset counter, for otherwise waiters might miss the reset
* pending state and not properly drop locks, resulting in
* deadlocks with the reset work.
*/
drm/i915: create a race-free reset detection With the previous patch the state transition handling of the reset code itself is now (hopefully) race free and solid. But that still leaves out everyone else - with the various lock-free wait paths we have there's the possibility that the reset happens between the point where we read the seqno we should wait on and the actual wait. And if __wait_seqno then never sees the RESET_IN_PROGRESS state, we'll happily wait for a seqno which will in all likelyhood never signal. In practice this is not a big problem since the X server gets constantly interrupted, and can then submit more work (hopefully) to unblock everyone else: As soon as a new seqno write lands, all waiters will unblock. But running the i-g-t reset testcase ZZ_hangman can expose this race, especially on slower hw with fewer cpu cores. Now looking forward to ARB_robustness and friends that's not the best possible behaviour, hence this patch adds a reset_counter to be able to detect any reset, even if a given thread never observed the in-progress state. The important part is to correctly order things: - The write side needs to increment the counter after any seqno gets reset. Hence we need to do that at the end of the reset work, and again wake everyone up. We also need to place a barrier in between any possible seqno changes and the counter increment, since any unlock operations only guarantee that nothing leaks out, but not that at later load operation gets moved ahead. - On the read side we need to ensure that no reset can sneak in and invalidate the seqno. In all cases we can use the one-sided barrier that unlock operations guarantee (of the lock protecting the respective seqno/ring pair) to ensure correct ordering. Hence it is sufficient to place the atomic read before the mutex/spin_unlock and no additional barriers are required. The end-result of all this is that we need to wake up everyone twice in a reset operation: - First, before the reset starts, to get any lockholders of the locks, so that the reset can proceed. - Second, after the reset is completed, to allow waiters to properly and reliably detect the reset condition and bail out. I admit that this entire reset_counter thing smells a bit like overkill, but I think it's justified since it makes it really explicit what the bail-out condition is. And we need a reset counter anyway to implement ARB_robustness, and imo with finer-grained locking on the horizont this is the most resilient scheme I could think of. v2: Drop spurious change in the wait_for_error EXIT_COND - we only need to wait until we leave the reset-in-progress wedged state. v3: Don't play tricks with barriers in the throttle ioctl, the spin_unlock is barrier enough. I've also considered using a little helper to grab the current reset_counter, but then decided that hiding the atomic_read isn't a great idea, since having it explicitly show up in the code is a nice remainder to reviews to check the memory barriers. v4: Add a comment to explain why we need to fall through in __wait_seqno in the end variable assignments. v5: Review from Damien: - s/smb/smp/ in a comment - don't increment the reset counter after we've set it to WEDGED. Now we (again) properly wedge the gpu when the reset fails. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-06 16:01:42 +08:00
ret = i915_reset(dev);
drm/i915: fix wait_for_pending_flips vs gpu hang deadlock My g33 here seems to be shockingly good at hitting them all. This time around kms_flip/flip-vs-panning-vs-hang blows up: intel_crtc_wait_for_pending_flips correctly checks for gpu hangs and if a gpu hang is pending aborts the wait for outstanding flips so that the setcrtc call will succeed and release the crtc mutex. And the gpu hang handler needs that lock in intel_display_handle_reset to be able to complete outstanding flips. The problem is that we can race in two ways: - Waiters on the dev_priv->pending_flip_queue aren't woken up after we've the reset as pending, but before we actually start the reset work. This means that the waiter doesn't notice the pending reset and hence will keep on hogging the locks. Like with dev->struct_mutex and the ring->irq_queue wait queues we there need to wake up everyone that potentially holds a lock which the reset handler needs. - intel_display_handle_reset was called _after_ we've already signalled the completion of the reset work. Which means a waiter could sneak in, grab the lock and never release it (since the pageflips won't ever get released). Similar to resetting the gem state all the reset work must complete before we update the reset counter. Contrary to the gem reset we don't need to have a second explicit wake up call since that will have happened already when completing the pageflips. We also don't have any issues that the completion happens while the reset state is still pending - wait_for_pending_flips is only there to ensure we display the right frame. After a gpu hang&reset events such guarantees are out the window anyway. This is in contrast to the gem code where too-early wake-up would result in unnecessary restarting of ioctls. Also, since we've gotten these various deadlocks and ordering constraints wrong so often throw copious amounts of comments at the code. This deadlock regression has been introduced in the commit which added the pageflip reset logic to the gpu hang work: commit 96a02917a0131e52efefde49c2784c0421d6c439 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Mon Feb 18 19:08:49 2013 +0200 drm/i915: Finish page flips and update primary planes after a GPU reset v2: - Add comments to explain how the wake_up serves as memory barriers for the atomic_t reset counter. - Improve the comments a bit as suggested by Chris Wilson. - Extract the wake_up calls before/after the reset into a little i915_error_wake_up and unconditionally wake up the pending_flip_queue waiters, again as suggested by Chris Wilson. v3: Throw copious amounts of comments at i915_error_wake_up as suggested by Chris Wilson. Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-09 03:57:13 +08:00
intel_display_handle_reset(dev);
drm/i915: create a race-free reset detection With the previous patch the state transition handling of the reset code itself is now (hopefully) race free and solid. But that still leaves out everyone else - with the various lock-free wait paths we have there's the possibility that the reset happens between the point where we read the seqno we should wait on and the actual wait. And if __wait_seqno then never sees the RESET_IN_PROGRESS state, we'll happily wait for a seqno which will in all likelyhood never signal. In practice this is not a big problem since the X server gets constantly interrupted, and can then submit more work (hopefully) to unblock everyone else: As soon as a new seqno write lands, all waiters will unblock. But running the i-g-t reset testcase ZZ_hangman can expose this race, especially on slower hw with fewer cpu cores. Now looking forward to ARB_robustness and friends that's not the best possible behaviour, hence this patch adds a reset_counter to be able to detect any reset, even if a given thread never observed the in-progress state. The important part is to correctly order things: - The write side needs to increment the counter after any seqno gets reset. Hence we need to do that at the end of the reset work, and again wake everyone up. We also need to place a barrier in between any possible seqno changes and the counter increment, since any unlock operations only guarantee that nothing leaks out, but not that at later load operation gets moved ahead. - On the read side we need to ensure that no reset can sneak in and invalidate the seqno. In all cases we can use the one-sided barrier that unlock operations guarantee (of the lock protecting the respective seqno/ring pair) to ensure correct ordering. Hence it is sufficient to place the atomic read before the mutex/spin_unlock and no additional barriers are required. The end-result of all this is that we need to wake up everyone twice in a reset operation: - First, before the reset starts, to get any lockholders of the locks, so that the reset can proceed. - Second, after the reset is completed, to allow waiters to properly and reliably detect the reset condition and bail out. I admit that this entire reset_counter thing smells a bit like overkill, but I think it's justified since it makes it really explicit what the bail-out condition is. And we need a reset counter anyway to implement ARB_robustness, and imo with finer-grained locking on the horizont this is the most resilient scheme I could think of. v2: Drop spurious change in the wait_for_error EXIT_COND - we only need to wait until we leave the reset-in-progress wedged state. v3: Don't play tricks with barriers in the throttle ioctl, the spin_unlock is barrier enough. I've also considered using a little helper to grab the current reset_counter, but then decided that hiding the atomic_read isn't a great idea, since having it explicitly show up in the code is a nice remainder to reviews to check the memory barriers. v4: Add a comment to explain why we need to fall through in __wait_seqno in the end variable assignments. v5: Review from Damien: - s/smb/smp/ in a comment - don't increment the reset counter after we've set it to WEDGED. Now we (again) properly wedge the gpu when the reset fails. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-06 16:01:42 +08:00
if (ret == 0) {
/*
* After all the gem state is reset, increment the reset
* counter and wake up everyone waiting for the reset to
* complete.
*
* Since unlock operations are a one-sided barrier only,
* we need to insert a barrier here to order any seqno
* updates before
* the counter increment.
*/
smp_mb__before_atomic_inc();
atomic_inc(&dev_priv->gpu_error.reset_counter);
kobject_uevent_env(&dev->primary->kdev.kobj,
KOBJ_CHANGE, reset_done_event);
drm/i915: clear up wedged transitions We have two important transitions of the wedged state in the current code: - 0 -> 1: This means a hang has been detected, and signals to everyone that they please get of any locks, so that the reset work item can do its job. - 1 -> 0: The reset handler has completed. Now the last transition mixes up two states: "Reset completed and successful" and "Reset failed". To distinguish these two we do some tricks with the reset completion, but I simply could not convince myself that this doesn't race under odd circumstances. Hence split this up, and add a new terminal state indicating that the hw is gone for good. Also add explicit #defines for both states, update comments. v2: Split out the reset handling bugfix for the throttle ioctl. v3: s/tmp/wedged/ sugested by Chris Wilson. Also fixup up a rebase error which prevented this patch from actually compiling. v4: To unify the wedged state with the reset counter, keep the reset-in-progress state just as a flag. The terminally-wedged state is now denoted with a big number. v5: Add a comment to the reset_counter special values explaining that WEDGED & RESET_IN_PROGRESS needs to be true for the code to be correct. v6: Fixup logic errors introduced with the wedged+reset_counter unification. Since WEDGED implies reset-in-progress (in a way we're terminally stuck in the dead-but-reset-not-completed state), we need ensure that we check for this everywhere. The specific bug was in wait_for_error, which would simply have timed out. v7: Extract an inline i915_reset_in_progress helper to make the code more readable. Also annote the reset-in-progress case with an unlikely, to help the compiler optimize the fastpath. Do the same for the terminally wedged case with i915_terminally_wedged. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-16 00:17:22 +08:00
} else {
atomic_set(&error->reset_counter, I915_WEDGED);
}
drm/i915: clear up wedged transitions We have two important transitions of the wedged state in the current code: - 0 -> 1: This means a hang has been detected, and signals to everyone that they please get of any locks, so that the reset work item can do its job. - 1 -> 0: The reset handler has completed. Now the last transition mixes up two states: "Reset completed and successful" and "Reset failed". To distinguish these two we do some tricks with the reset completion, but I simply could not convince myself that this doesn't race under odd circumstances. Hence split this up, and add a new terminal state indicating that the hw is gone for good. Also add explicit #defines for both states, update comments. v2: Split out the reset handling bugfix for the throttle ioctl. v3: s/tmp/wedged/ sugested by Chris Wilson. Also fixup up a rebase error which prevented this patch from actually compiling. v4: To unify the wedged state with the reset counter, keep the reset-in-progress state just as a flag. The terminally-wedged state is now denoted with a big number. v5: Add a comment to the reset_counter special values explaining that WEDGED & RESET_IN_PROGRESS needs to be true for the code to be correct. v6: Fixup logic errors introduced with the wedged+reset_counter unification. Since WEDGED implies reset-in-progress (in a way we're terminally stuck in the dead-but-reset-not-completed state), we need ensure that we check for this everywhere. The specific bug was in wait_for_error, which would simply have timed out. v7: Extract an inline i915_reset_in_progress helper to make the code more readable. Also annote the reset-in-progress case with an unlikely, to help the compiler optimize the fastpath. Do the same for the terminally wedged case with i915_terminally_wedged. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-16 00:17:22 +08:00
drm/i915: fix wait_for_pending_flips vs gpu hang deadlock My g33 here seems to be shockingly good at hitting them all. This time around kms_flip/flip-vs-panning-vs-hang blows up: intel_crtc_wait_for_pending_flips correctly checks for gpu hangs and if a gpu hang is pending aborts the wait for outstanding flips so that the setcrtc call will succeed and release the crtc mutex. And the gpu hang handler needs that lock in intel_display_handle_reset to be able to complete outstanding flips. The problem is that we can race in two ways: - Waiters on the dev_priv->pending_flip_queue aren't woken up after we've the reset as pending, but before we actually start the reset work. This means that the waiter doesn't notice the pending reset and hence will keep on hogging the locks. Like with dev->struct_mutex and the ring->irq_queue wait queues we there need to wake up everyone that potentially holds a lock which the reset handler needs. - intel_display_handle_reset was called _after_ we've already signalled the completion of the reset work. Which means a waiter could sneak in, grab the lock and never release it (since the pageflips won't ever get released). Similar to resetting the gem state all the reset work must complete before we update the reset counter. Contrary to the gem reset we don't need to have a second explicit wake up call since that will have happened already when completing the pageflips. We also don't have any issues that the completion happens while the reset state is still pending - wait_for_pending_flips is only there to ensure we display the right frame. After a gpu hang&reset events such guarantees are out the window anyway. This is in contrast to the gem code where too-early wake-up would result in unnecessary restarting of ioctls. Also, since we've gotten these various deadlocks and ordering constraints wrong so often throw copious amounts of comments at the code. This deadlock regression has been introduced in the commit which added the pageflip reset logic to the gpu hang work: commit 96a02917a0131e52efefde49c2784c0421d6c439 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Mon Feb 18 19:08:49 2013 +0200 drm/i915: Finish page flips and update primary planes after a GPU reset v2: - Add comments to explain how the wake_up serves as memory barriers for the atomic_t reset counter. - Improve the comments a bit as suggested by Chris Wilson. - Extract the wake_up calls before/after the reset into a little i915_error_wake_up and unconditionally wake up the pending_flip_queue waiters, again as suggested by Chris Wilson. v3: Throw copious amounts of comments at i915_error_wake_up as suggested by Chris Wilson. Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-09 03:57:13 +08:00
/*
* Note: The wake_up also serves as a memory barrier so that
* waiters see the update value of the reset counter atomic_t.
*/
i915_error_wake_up(dev_priv, true);
}
}
static void i915_report_and_clear_eir(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t instdone[I915_NUM_INSTDONE_REG];
u32 eir = I915_READ(EIR);
int pipe, i;
if (!eir)
return;
pr_err("render error detected, EIR: 0x%08x\n", eir);
i915_get_extra_instdone(dev, instdone);
if (IS_G4X(dev)) {
if (eir & (GM45_ERROR_MEM_PRIV | GM45_ERROR_CP_PRIV)) {
u32 ipeir = I915_READ(IPEIR_I965);
pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR_I965));
pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR_I965));
for (i = 0; i < ARRAY_SIZE(instdone); i++)
pr_err(" INSTDONE_%d: 0x%08x\n", i, instdone[i]);
pr_err(" INSTPS: 0x%08x\n", I915_READ(INSTPS));
pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD_I965));
I915_WRITE(IPEIR_I965, ipeir);
POSTING_READ(IPEIR_I965);
}
if (eir & GM45_ERROR_PAGE_TABLE) {
u32 pgtbl_err = I915_READ(PGTBL_ER);
pr_err("page table error\n");
pr_err(" PGTBL_ER: 0x%08x\n", pgtbl_err);
I915_WRITE(PGTBL_ER, pgtbl_err);
POSTING_READ(PGTBL_ER);
}
}
if (!IS_GEN2(dev)) {
if (eir & I915_ERROR_PAGE_TABLE) {
u32 pgtbl_err = I915_READ(PGTBL_ER);
pr_err("page table error\n");
pr_err(" PGTBL_ER: 0x%08x\n", pgtbl_err);
I915_WRITE(PGTBL_ER, pgtbl_err);
POSTING_READ(PGTBL_ER);
}
}
if (eir & I915_ERROR_MEMORY_REFRESH) {
pr_err("memory refresh error:\n");
for_each_pipe(pipe)
pr_err("pipe %c stat: 0x%08x\n",
pipe_name(pipe), I915_READ(PIPESTAT(pipe)));
/* pipestat has already been acked */
}
if (eir & I915_ERROR_INSTRUCTION) {
pr_err("instruction error\n");
pr_err(" INSTPM: 0x%08x\n", I915_READ(INSTPM));
for (i = 0; i < ARRAY_SIZE(instdone); i++)
pr_err(" INSTDONE_%d: 0x%08x\n", i, instdone[i]);
if (INTEL_INFO(dev)->gen < 4) {
u32 ipeir = I915_READ(IPEIR);
pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR));
pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR));
pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD));
I915_WRITE(IPEIR, ipeir);
POSTING_READ(IPEIR);
} else {
u32 ipeir = I915_READ(IPEIR_I965);
pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR_I965));
pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR_I965));
pr_err(" INSTPS: 0x%08x\n", I915_READ(INSTPS));
pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD_I965));
I915_WRITE(IPEIR_I965, ipeir);
POSTING_READ(IPEIR_I965);
}
}
I915_WRITE(EIR, eir);
POSTING_READ(EIR);
eir = I915_READ(EIR);
if (eir) {
/*
* some errors might have become stuck,
* mask them.
*/
DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir);
I915_WRITE(EMR, I915_READ(EMR) | eir);
I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
}
}
/**
* i915_handle_error - handle an error interrupt
* @dev: drm device
*
* Do some basic checking of regsiter state at error interrupt time and
* dump it to the syslog. Also call i915_capture_error_state() to make
* sure we get a record and make it available in debugfs. Fire a uevent
* so userspace knows something bad happened (should trigger collection
* of a ring dump etc.).
*/
void i915_handle_error(struct drm_device *dev, bool wedged)
{
struct drm_i915_private *dev_priv = dev->dev_private;
i915_capture_error_state(dev);
i915_report_and_clear_eir(dev);
if (wedged) {
drm/i915: create a race-free reset detection With the previous patch the state transition handling of the reset code itself is now (hopefully) race free and solid. But that still leaves out everyone else - with the various lock-free wait paths we have there's the possibility that the reset happens between the point where we read the seqno we should wait on and the actual wait. And if __wait_seqno then never sees the RESET_IN_PROGRESS state, we'll happily wait for a seqno which will in all likelyhood never signal. In practice this is not a big problem since the X server gets constantly interrupted, and can then submit more work (hopefully) to unblock everyone else: As soon as a new seqno write lands, all waiters will unblock. But running the i-g-t reset testcase ZZ_hangman can expose this race, especially on slower hw with fewer cpu cores. Now looking forward to ARB_robustness and friends that's not the best possible behaviour, hence this patch adds a reset_counter to be able to detect any reset, even if a given thread never observed the in-progress state. The important part is to correctly order things: - The write side needs to increment the counter after any seqno gets reset. Hence we need to do that at the end of the reset work, and again wake everyone up. We also need to place a barrier in between any possible seqno changes and the counter increment, since any unlock operations only guarantee that nothing leaks out, but not that at later load operation gets moved ahead. - On the read side we need to ensure that no reset can sneak in and invalidate the seqno. In all cases we can use the one-sided barrier that unlock operations guarantee (of the lock protecting the respective seqno/ring pair) to ensure correct ordering. Hence it is sufficient to place the atomic read before the mutex/spin_unlock and no additional barriers are required. The end-result of all this is that we need to wake up everyone twice in a reset operation: - First, before the reset starts, to get any lockholders of the locks, so that the reset can proceed. - Second, after the reset is completed, to allow waiters to properly and reliably detect the reset condition and bail out. I admit that this entire reset_counter thing smells a bit like overkill, but I think it's justified since it makes it really explicit what the bail-out condition is. And we need a reset counter anyway to implement ARB_robustness, and imo with finer-grained locking on the horizont this is the most resilient scheme I could think of. v2: Drop spurious change in the wait_for_error EXIT_COND - we only need to wait until we leave the reset-in-progress wedged state. v3: Don't play tricks with barriers in the throttle ioctl, the spin_unlock is barrier enough. I've also considered using a little helper to grab the current reset_counter, but then decided that hiding the atomic_read isn't a great idea, since having it explicitly show up in the code is a nice remainder to reviews to check the memory barriers. v4: Add a comment to explain why we need to fall through in __wait_seqno in the end variable assignments. v5: Review from Damien: - s/smb/smp/ in a comment - don't increment the reset counter after we've set it to WEDGED. Now we (again) properly wedge the gpu when the reset fails. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-06 16:01:42 +08:00
atomic_set_mask(I915_RESET_IN_PROGRESS_FLAG,
&dev_priv->gpu_error.reset_counter);
/*
drm/i915: fix wait_for_pending_flips vs gpu hang deadlock My g33 here seems to be shockingly good at hitting them all. This time around kms_flip/flip-vs-panning-vs-hang blows up: intel_crtc_wait_for_pending_flips correctly checks for gpu hangs and if a gpu hang is pending aborts the wait for outstanding flips so that the setcrtc call will succeed and release the crtc mutex. And the gpu hang handler needs that lock in intel_display_handle_reset to be able to complete outstanding flips. The problem is that we can race in two ways: - Waiters on the dev_priv->pending_flip_queue aren't woken up after we've the reset as pending, but before we actually start the reset work. This means that the waiter doesn't notice the pending reset and hence will keep on hogging the locks. Like with dev->struct_mutex and the ring->irq_queue wait queues we there need to wake up everyone that potentially holds a lock which the reset handler needs. - intel_display_handle_reset was called _after_ we've already signalled the completion of the reset work. Which means a waiter could sneak in, grab the lock and never release it (since the pageflips won't ever get released). Similar to resetting the gem state all the reset work must complete before we update the reset counter. Contrary to the gem reset we don't need to have a second explicit wake up call since that will have happened already when completing the pageflips. We also don't have any issues that the completion happens while the reset state is still pending - wait_for_pending_flips is only there to ensure we display the right frame. After a gpu hang&reset events such guarantees are out the window anyway. This is in contrast to the gem code where too-early wake-up would result in unnecessary restarting of ioctls. Also, since we've gotten these various deadlocks and ordering constraints wrong so often throw copious amounts of comments at the code. This deadlock regression has been introduced in the commit which added the pageflip reset logic to the gpu hang work: commit 96a02917a0131e52efefde49c2784c0421d6c439 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Mon Feb 18 19:08:49 2013 +0200 drm/i915: Finish page flips and update primary planes after a GPU reset v2: - Add comments to explain how the wake_up serves as memory barriers for the atomic_t reset counter. - Improve the comments a bit as suggested by Chris Wilson. - Extract the wake_up calls before/after the reset into a little i915_error_wake_up and unconditionally wake up the pending_flip_queue waiters, again as suggested by Chris Wilson. v3: Throw copious amounts of comments at i915_error_wake_up as suggested by Chris Wilson. Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-09 03:57:13 +08:00
* Wakeup waiting processes so that the reset work function
* i915_error_work_func doesn't deadlock trying to grab various
* locks. By bumping the reset counter first, the woken
* processes will see a reset in progress and back off,
* releasing their locks and then wait for the reset completion.
* We must do this for _all_ gpu waiters that might hold locks
* that the reset work needs to acquire.
*
* Note: The wake_up serves as the required memory barrier to
* ensure that the waiters see the updated value of the reset
* counter atomic_t.
*/
drm/i915: fix wait_for_pending_flips vs gpu hang deadlock My g33 here seems to be shockingly good at hitting them all. This time around kms_flip/flip-vs-panning-vs-hang blows up: intel_crtc_wait_for_pending_flips correctly checks for gpu hangs and if a gpu hang is pending aborts the wait for outstanding flips so that the setcrtc call will succeed and release the crtc mutex. And the gpu hang handler needs that lock in intel_display_handle_reset to be able to complete outstanding flips. The problem is that we can race in two ways: - Waiters on the dev_priv->pending_flip_queue aren't woken up after we've the reset as pending, but before we actually start the reset work. This means that the waiter doesn't notice the pending reset and hence will keep on hogging the locks. Like with dev->struct_mutex and the ring->irq_queue wait queues we there need to wake up everyone that potentially holds a lock which the reset handler needs. - intel_display_handle_reset was called _after_ we've already signalled the completion of the reset work. Which means a waiter could sneak in, grab the lock and never release it (since the pageflips won't ever get released). Similar to resetting the gem state all the reset work must complete before we update the reset counter. Contrary to the gem reset we don't need to have a second explicit wake up call since that will have happened already when completing the pageflips. We also don't have any issues that the completion happens while the reset state is still pending - wait_for_pending_flips is only there to ensure we display the right frame. After a gpu hang&reset events such guarantees are out the window anyway. This is in contrast to the gem code where too-early wake-up would result in unnecessary restarting of ioctls. Also, since we've gotten these various deadlocks and ordering constraints wrong so often throw copious amounts of comments at the code. This deadlock regression has been introduced in the commit which added the pageflip reset logic to the gpu hang work: commit 96a02917a0131e52efefde49c2784c0421d6c439 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Mon Feb 18 19:08:49 2013 +0200 drm/i915: Finish page flips and update primary planes after a GPU reset v2: - Add comments to explain how the wake_up serves as memory barriers for the atomic_t reset counter. - Improve the comments a bit as suggested by Chris Wilson. - Extract the wake_up calls before/after the reset into a little i915_error_wake_up and unconditionally wake up the pending_flip_queue waiters, again as suggested by Chris Wilson. v3: Throw copious amounts of comments at i915_error_wake_up as suggested by Chris Wilson. Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-09 03:57:13 +08:00
i915_error_wake_up(dev_priv, false);
}
drm/i915: fix gpu hang vs. flip stall deadlocks Since we've started to clean up pending flips when the gpu hangs in commit 96a02917a0131e52efefde49c2784c0421d6c439 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Mon Feb 18 19:08:49 2013 +0200 drm/i915: Finish page flips and update primary planes after a GPU reset the gpu reset work now also grabs modeset locks. But since work items on our private work queue are not allowed to do that due to the flush_workqueue from the pageflip code this results in a neat deadlock: INFO: task kms_flip:14676 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kms_flip D ffff88019283a5c0 0 14676 13344 0x00000004 ffff88018e62dbf8 0000000000000046 ffff88013bdb12e0 ffff88018e62dfd8 ffff88018e62dfd8 00000000001d3b00 ffff88019283a5c0 ffff88018ec21000 ffff88018f693f00 ffff88018eece000 ffff88018e62dd60 ffff88018eece898 Call Trace: [<ffffffff8138ee7b>] schedule+0x60/0x62 [<ffffffffa046c0dd>] intel_crtc_wait_for_pending_flips+0xb2/0x114 [i915] [<ffffffff81050ff4>] ? finish_wait+0x60/0x60 [<ffffffffa0478041>] intel_crtc_set_config+0x7f3/0x81e [i915] [<ffffffffa031780a>] drm_mode_set_config_internal+0x4f/0xc6 [drm] [<ffffffffa0319cf3>] drm_mode_setcrtc+0x44d/0x4f9 [drm] [<ffffffff810e44da>] ? might_fault+0x38/0x86 [<ffffffffa030d51f>] drm_ioctl+0x2f9/0x447 [drm] [<ffffffff8107a722>] ? trace_hardirqs_off+0xd/0xf [<ffffffffa03198a6>] ? drm_mode_setplane+0x343/0x343 [drm] [<ffffffff8112222f>] ? mntput_no_expire+0x3e/0x13d [<ffffffff81117f33>] vfs_ioctl+0x18/0x34 [<ffffffff81118776>] do_vfs_ioctl+0x396/0x454 [<ffffffff81396b37>] ? sysret_check+0x1b/0x56 [<ffffffff81118886>] SyS_ioctl+0x52/0x7d [<ffffffff81396b12>] system_call_fastpath+0x16/0x1b 2 locks held by kms_flip/14676: #0: (&dev->mode_config.mutex){+.+.+.}, at: [<ffffffffa0316545>] drm_modeset_lock_all+0x22/0x59 [drm] #1: (&crtc->mutex){+.+.+.}, at: [<ffffffffa031656b>] drm_modeset_lock_all+0x48/0x59 [drm] INFO: task kworker/u8:4:175 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/u8:4 D ffff88018de9a5c0 0 175 2 0x00000000 Workqueue: i915 i915_error_work_func [i915] ffff88018e37dc30 0000000000000046 ffff8801938ab8a0 ffff88018e37dfd8 ffff88018e37dfd8 00000000001d3b00 ffff88018de9a5c0 ffff88018ec21018 0000000000000246 ffff88018e37dca0 000000005a865a86 ffff88018de9a5c0 Call Trace: [<ffffffff8138ee7b>] schedule+0x60/0x62 [<ffffffff8138f23d>] schedule_preempt_disabled+0x9/0xb [<ffffffff8138d0cd>] mutex_lock_nested+0x205/0x3b1 [<ffffffffa0477094>] ? intel_display_handle_reset+0x7e/0xbd [i915] [<ffffffffa0477094>] ? intel_display_handle_reset+0x7e/0xbd [i915] [<ffffffffa0477094>] intel_display_handle_reset+0x7e/0xbd [i915] [<ffffffffa044e0a2>] i915_error_work_func+0x128/0x147 [i915] [<ffffffff8104a89a>] process_one_work+0x1d4/0x35a [<ffffffff8104a821>] ? process_one_work+0x15b/0x35a [<ffffffff8104b4a5>] worker_thread+0x144/0x1f0 [<ffffffff8104b361>] ? rescuer_thread+0x275/0x275 [<ffffffff8105076d>] kthread+0xac/0xb4 [<ffffffff81059d30>] ? finish_task_switch+0x3b/0xc0 [<ffffffff810506c1>] ? __kthread_parkme+0x60/0x60 [<ffffffff81396a6c>] ret_from_fork+0x7c/0xb0 [<ffffffff810506c1>] ? __kthread_parkme+0x60/0x60 3 locks held by kworker/u8:4/175: #0: (i915){.+.+.+}, at: [<ffffffff8104a821>] process_one_work+0x15b/0x35a #1: ((&dev_priv->gpu_error.work)){+.+.+.}, at: [<ffffffff8104a821>] process_one_work+0x15b/0x35a #2: (&crtc->mutex){+.+.+.}, at: [<ffffffffa0477094>] intel_display_handle_reset+0x7e/0xbd [i915] This blew up while running kms_flip/flip-vs-panning-vs-hang-interruptible on one of my older machines. Unfortunately (despite the proper lockdep annotations for flush_workqueue) lockdep still doesn't detect this correctly, so we need to rely on chance to discover these bugs. Apply the usual bugfix and schedule the reset work on the system workqueue to keep our own driver workqueue free of any modeset lock grabbing. Note that this is not a terribly serious regression since before the offending commit we'd simply have stalled userspace forever due to failing to abort all outstanding pageflips. v2: Add a comment as requested by Chris. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-04 23:36:14 +08:00
/*
* Our reset work can grab modeset locks (since it needs to reset the
* state of outstanding pagelips). Hence it must not be run on our own
* dev-priv->wq work queue for otherwise the flush_work in the pageflip
* code will deadlock.
*/
schedule_work(&dev_priv->gpu_error.work);
}
static void __always_unused i915_pageflip_stall_check(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct drm_i915_gem_object *obj;
struct intel_unpin_work *work;
unsigned long flags;
bool stall_detected;
/* Ignore early vblank irqs */
if (intel_crtc == NULL)
return;
spin_lock_irqsave(&dev->event_lock, flags);
work = intel_crtc->unpin_work;
if (work == NULL ||
atomic_read(&work->pending) >= INTEL_FLIP_COMPLETE ||
!work->enable_stall_check) {
/* Either the pending flip IRQ arrived, or we're too early. Don't check */
spin_unlock_irqrestore(&dev->event_lock, flags);
return;
}
/* Potential stall - if we see that the flip has happened, assume a missed interrupt */
obj = work->pending_flip_obj;
if (INTEL_INFO(dev)->gen >= 4) {
int dspsurf = DSPSURF(intel_crtc->plane);
stall_detected = I915_HI_DISPBASE(I915_READ(dspsurf)) ==
i915_gem_obj_ggtt_offset(obj);
} else {
int dspaddr = DSPADDR(intel_crtc->plane);
stall_detected = I915_READ(dspaddr) == (i915_gem_obj_ggtt_offset(obj) +
crtc->y * crtc->fb->pitches[0] +
crtc->x * crtc->fb->bits_per_pixel/8);
}
spin_unlock_irqrestore(&dev->event_lock, flags);
if (stall_detected) {
DRM_DEBUG_DRIVER("Pageflip stall detected\n");
intel_prepare_page_flip(dev, intel_crtc->plane);
}
}
/* Called from drm generic code, passed 'crtc' which
* we use as a pipe index
*/
static int i915_enable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
if (!i915_pipe_enabled(dev, pipe))
return -EINVAL;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
if (INTEL_INFO(dev)->gen >= 4)
i915_enable_pipestat(dev_priv, pipe,
PIPE_START_VBLANK_INTERRUPT_ENABLE);
else
i915_enable_pipestat(dev_priv, pipe,
PIPE_VBLANK_INTERRUPT_ENABLE);
/* maintain vblank delivery even in deep C-states */
if (dev_priv->info->gen == 3)
I915_WRITE(INSTPM, _MASKED_BIT_DISABLE(INSTPM_AGPBUSY_DIS));
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
return 0;
}
static int ironlake_enable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
uint32_t bit = (INTEL_INFO(dev)->gen >= 7) ? DE_PIPE_VBLANK_IVB(pipe) :
DE_PIPE_VBLANK_ILK(pipe);
if (!i915_pipe_enabled(dev, pipe))
return -EINVAL;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
ironlake_enable_display_irq(dev_priv, bit);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
return 0;
}
static int valleyview_enable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
u32 imr;
if (!i915_pipe_enabled(dev, pipe))
return -EINVAL;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
imr = I915_READ(VLV_IMR);
if (pipe == 0)
imr &= ~I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT;
else
imr &= ~I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
I915_WRITE(VLV_IMR, imr);
i915_enable_pipestat(dev_priv, pipe,
PIPE_START_VBLANK_INTERRUPT_ENABLE);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
return 0;
}
/* Called from drm generic code, passed 'crtc' which
* we use as a pipe index
*/
static void i915_disable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
if (dev_priv->info->gen == 3)
I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_AGPBUSY_DIS));
i915_disable_pipestat(dev_priv, pipe,
PIPE_VBLANK_INTERRUPT_ENABLE |
PIPE_START_VBLANK_INTERRUPT_ENABLE);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
static void ironlake_disable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
uint32_t bit = (INTEL_INFO(dev)->gen >= 7) ? DE_PIPE_VBLANK_IVB(pipe) :
DE_PIPE_VBLANK_ILK(pipe);
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
ironlake_disable_display_irq(dev_priv, bit);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
static void valleyview_disable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
u32 imr;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
i915_disable_pipestat(dev_priv, pipe,
PIPE_START_VBLANK_INTERRUPT_ENABLE);
imr = I915_READ(VLV_IMR);
if (pipe == 0)
imr |= I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT;
else
imr |= I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
I915_WRITE(VLV_IMR, imr);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
static u32
ring_last_seqno(struct intel_ring_buffer *ring)
{
return list_entry(ring->request_list.prev,
struct drm_i915_gem_request, list)->seqno;
}
static bool
ring_idle(struct intel_ring_buffer *ring, u32 seqno)
{
return (list_empty(&ring->request_list) ||
i915_seqno_passed(seqno, ring_last_seqno(ring)));
}
static struct intel_ring_buffer *
semaphore_waits_for(struct intel_ring_buffer *ring, u32 *seqno)
{
struct drm_i915_private *dev_priv = ring->dev->dev_private;
u32 cmd, ipehr, acthd, acthd_min;
ipehr = I915_READ(RING_IPEHR(ring->mmio_base));
if ((ipehr & ~(0x3 << 16)) !=
(MI_SEMAPHORE_MBOX | MI_SEMAPHORE_COMPARE | MI_SEMAPHORE_REGISTER))
return NULL;
/* ACTHD is likely pointing to the dword after the actual command,
* so scan backwards until we find the MBOX.
*/
acthd = intel_ring_get_active_head(ring) & HEAD_ADDR;
acthd_min = max((int)acthd - 3 * 4, 0);
do {
cmd = ioread32(ring->virtual_start + acthd);
if (cmd == ipehr)
break;
acthd -= 4;
if (acthd < acthd_min)
return NULL;
} while (1);
*seqno = ioread32(ring->virtual_start+acthd+4)+1;
return &dev_priv->ring[(ring->id + (((ipehr >> 17) & 1) + 1)) % 3];
}
static int semaphore_passed(struct intel_ring_buffer *ring)
{
struct drm_i915_private *dev_priv = ring->dev->dev_private;
struct intel_ring_buffer *signaller;
u32 seqno, ctl;
ring->hangcheck.deadlock = true;
signaller = semaphore_waits_for(ring, &seqno);
if (signaller == NULL || signaller->hangcheck.deadlock)
return -1;
/* cursory check for an unkickable deadlock */
ctl = I915_READ_CTL(signaller);
if (ctl & RING_WAIT_SEMAPHORE && semaphore_passed(signaller) < 0)
return -1;
return i915_seqno_passed(signaller->get_seqno(signaller, false), seqno);
}
static void semaphore_clear_deadlocks(struct drm_i915_private *dev_priv)
{
struct intel_ring_buffer *ring;
int i;
for_each_ring(ring, dev_priv, i)
ring->hangcheck.deadlock = false;
}
static enum intel_ring_hangcheck_action
ring_stuck(struct intel_ring_buffer *ring, u32 acthd)
{
struct drm_device *dev = ring->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 tmp;
if (ring->hangcheck.acthd != acthd)
return HANGCHECK_ACTIVE;
if (IS_GEN2(dev))
return HANGCHECK_HUNG;
/* Is the chip hanging on a WAIT_FOR_EVENT?
* If so we can simply poke the RB_WAIT bit
* and break the hang. This should work on
* all but the second generation chipsets.
*/
tmp = I915_READ_CTL(ring);
if (tmp & RING_WAIT) {
DRM_ERROR("Kicking stuck wait on %s\n",
ring->name);
I915_WRITE_CTL(ring, tmp);
return HANGCHECK_KICK;
}
if (INTEL_INFO(dev)->gen >= 6 && tmp & RING_WAIT_SEMAPHORE) {
switch (semaphore_passed(ring)) {
default:
return HANGCHECK_HUNG;
case 1:
DRM_ERROR("Kicking stuck semaphore on %s\n",
ring->name);
I915_WRITE_CTL(ring, tmp);
return HANGCHECK_KICK;
case 0:
return HANGCHECK_WAIT;
}
}
return HANGCHECK_HUNG;
}
/**
* This is called when the chip hasn't reported back with completed
drm/i915: detect hang using per ring hangcheck_score Keep track of ring seqno progress and if there are no progress detected, declare hang. Use actual head (acthd) to distinguish between ring stuck and batchbuffer looping situation. Stuck ring will be kicked to trigger progress. This commit adds a hard limit for batchbuffer completion time. If batchbuffer completion time is more than 4.5 seconds, the gpu will be declared hung. Review comment from Ben which nicely clarifies the semantic change: "Maybe I'm just stating the functional changes of the patch, but in case they were unintended here is what I see as potential issues: 1. "If ring B is waiting on ring A via semaphore, and ring A is making progress, albeit slowly - the hangcheck will fire. The check will determine that A is moving, however ring B will appear hung because the ACTHD doesn't move. I honestly can't say if that's actually a realistic problem to hit it probably implies the timeout value is too low. 2. "There's also another corner case on the kick. If the seqno = 2 (though not stuck), and on the 3rd hangcheck, the ring is stuck, and we try to kick it... we don't actually try to find out if the kick helped" v2: use atchd to detect stuck ring from loop (Ben Widawsky) v3: Use acthd to check when ring needs kicking. Declare hang on third time in order to give time for kick_ring to take effect. v4: Update commit msg Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Paste in Ben's review comment.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-30 14:04:29 +08:00
* batchbuffers in a long time. We keep track per ring seqno progress and
* if there are no progress, hangcheck score for that ring is increased.
* Further, acthd is inspected to see if the ring is stuck. On stuck case
* we kick the ring. If we see no progress on three subsequent calls
* we assume chip is wedged and try to fix it by resetting the chip.
*/
static void i915_hangcheck_elapsed(unsigned long data)
{
struct drm_device *dev = (struct drm_device *)data;
drm_i915_private_t *dev_priv = dev->dev_private;
struct intel_ring_buffer *ring;
int i;
drm/i915: detect hang using per ring hangcheck_score Keep track of ring seqno progress and if there are no progress detected, declare hang. Use actual head (acthd) to distinguish between ring stuck and batchbuffer looping situation. Stuck ring will be kicked to trigger progress. This commit adds a hard limit for batchbuffer completion time. If batchbuffer completion time is more than 4.5 seconds, the gpu will be declared hung. Review comment from Ben which nicely clarifies the semantic change: "Maybe I'm just stating the functional changes of the patch, but in case they were unintended here is what I see as potential issues: 1. "If ring B is waiting on ring A via semaphore, and ring A is making progress, albeit slowly - the hangcheck will fire. The check will determine that A is moving, however ring B will appear hung because the ACTHD doesn't move. I honestly can't say if that's actually a realistic problem to hit it probably implies the timeout value is too low. 2. "There's also another corner case on the kick. If the seqno = 2 (though not stuck), and on the 3rd hangcheck, the ring is stuck, and we try to kick it... we don't actually try to find out if the kick helped" v2: use atchd to detect stuck ring from loop (Ben Widawsky) v3: Use acthd to check when ring needs kicking. Declare hang on third time in order to give time for kick_ring to take effect. v4: Update commit msg Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Paste in Ben's review comment.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-30 14:04:29 +08:00
int busy_count = 0, rings_hung = 0;
bool stuck[I915_NUM_RINGS] = { 0 };
#define BUSY 1
#define KICK 5
#define HUNG 20
#define FIRE 30
if (!i915_enable_hangcheck)
return;
for_each_ring(ring, dev_priv, i) {
drm/i915: detect hang using per ring hangcheck_score Keep track of ring seqno progress and if there are no progress detected, declare hang. Use actual head (acthd) to distinguish between ring stuck and batchbuffer looping situation. Stuck ring will be kicked to trigger progress. This commit adds a hard limit for batchbuffer completion time. If batchbuffer completion time is more than 4.5 seconds, the gpu will be declared hung. Review comment from Ben which nicely clarifies the semantic change: "Maybe I'm just stating the functional changes of the patch, but in case they were unintended here is what I see as potential issues: 1. "If ring B is waiting on ring A via semaphore, and ring A is making progress, albeit slowly - the hangcheck will fire. The check will determine that A is moving, however ring B will appear hung because the ACTHD doesn't move. I honestly can't say if that's actually a realistic problem to hit it probably implies the timeout value is too low. 2. "There's also another corner case on the kick. If the seqno = 2 (though not stuck), and on the 3rd hangcheck, the ring is stuck, and we try to kick it... we don't actually try to find out if the kick helped" v2: use atchd to detect stuck ring from loop (Ben Widawsky) v3: Use acthd to check when ring needs kicking. Declare hang on third time in order to give time for kick_ring to take effect. v4: Update commit msg Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Paste in Ben's review comment.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-30 14:04:29 +08:00
u32 seqno, acthd;
bool busy = true;
drm/i915: detect hang using per ring hangcheck_score Keep track of ring seqno progress and if there are no progress detected, declare hang. Use actual head (acthd) to distinguish between ring stuck and batchbuffer looping situation. Stuck ring will be kicked to trigger progress. This commit adds a hard limit for batchbuffer completion time. If batchbuffer completion time is more than 4.5 seconds, the gpu will be declared hung. Review comment from Ben which nicely clarifies the semantic change: "Maybe I'm just stating the functional changes of the patch, but in case they were unintended here is what I see as potential issues: 1. "If ring B is waiting on ring A via semaphore, and ring A is making progress, albeit slowly - the hangcheck will fire. The check will determine that A is moving, however ring B will appear hung because the ACTHD doesn't move. I honestly can't say if that's actually a realistic problem to hit it probably implies the timeout value is too low. 2. "There's also another corner case on the kick. If the seqno = 2 (though not stuck), and on the 3rd hangcheck, the ring is stuck, and we try to kick it... we don't actually try to find out if the kick helped" v2: use atchd to detect stuck ring from loop (Ben Widawsky) v3: Use acthd to check when ring needs kicking. Declare hang on third time in order to give time for kick_ring to take effect. v4: Update commit msg Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Paste in Ben's review comment.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-30 14:04:29 +08:00
semaphore_clear_deadlocks(dev_priv);
drm/i915: detect hang using per ring hangcheck_score Keep track of ring seqno progress and if there are no progress detected, declare hang. Use actual head (acthd) to distinguish between ring stuck and batchbuffer looping situation. Stuck ring will be kicked to trigger progress. This commit adds a hard limit for batchbuffer completion time. If batchbuffer completion time is more than 4.5 seconds, the gpu will be declared hung. Review comment from Ben which nicely clarifies the semantic change: "Maybe I'm just stating the functional changes of the patch, but in case they were unintended here is what I see as potential issues: 1. "If ring B is waiting on ring A via semaphore, and ring A is making progress, albeit slowly - the hangcheck will fire. The check will determine that A is moving, however ring B will appear hung because the ACTHD doesn't move. I honestly can't say if that's actually a realistic problem to hit it probably implies the timeout value is too low. 2. "There's also another corner case on the kick. If the seqno = 2 (though not stuck), and on the 3rd hangcheck, the ring is stuck, and we try to kick it... we don't actually try to find out if the kick helped" v2: use atchd to detect stuck ring from loop (Ben Widawsky) v3: Use acthd to check when ring needs kicking. Declare hang on third time in order to give time for kick_ring to take effect. v4: Update commit msg Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Paste in Ben's review comment.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-30 14:04:29 +08:00
seqno = ring->get_seqno(ring, false);
acthd = intel_ring_get_active_head(ring);
if (ring->hangcheck.seqno == seqno) {
if (ring_idle(ring, seqno)) {
ring->hangcheck.action = HANGCHECK_IDLE;
if (waitqueue_active(&ring->irq_queue)) {
/* Issue a wake-up to catch stuck h/w. */
if (!test_and_set_bit(ring->id, &dev_priv->gpu_error.missed_irq_rings)) {
DRM_ERROR("Hangcheck timer elapsed... %s idle\n",
ring->name);
wake_up_all(&ring->irq_queue);
}
/* Safeguard against driver failure */
ring->hangcheck.score += BUSY;
} else
busy = false;
drm/i915: detect hang using per ring hangcheck_score Keep track of ring seqno progress and if there are no progress detected, declare hang. Use actual head (acthd) to distinguish between ring stuck and batchbuffer looping situation. Stuck ring will be kicked to trigger progress. This commit adds a hard limit for batchbuffer completion time. If batchbuffer completion time is more than 4.5 seconds, the gpu will be declared hung. Review comment from Ben which nicely clarifies the semantic change: "Maybe I'm just stating the functional changes of the patch, but in case they were unintended here is what I see as potential issues: 1. "If ring B is waiting on ring A via semaphore, and ring A is making progress, albeit slowly - the hangcheck will fire. The check will determine that A is moving, however ring B will appear hung because the ACTHD doesn't move. I honestly can't say if that's actually a realistic problem to hit it probably implies the timeout value is too low. 2. "There's also another corner case on the kick. If the seqno = 2 (though not stuck), and on the 3rd hangcheck, the ring is stuck, and we try to kick it... we don't actually try to find out if the kick helped" v2: use atchd to detect stuck ring from loop (Ben Widawsky) v3: Use acthd to check when ring needs kicking. Declare hang on third time in order to give time for kick_ring to take effect. v4: Update commit msg Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Paste in Ben's review comment.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-30 14:04:29 +08:00
} else {
/* We always increment the hangcheck score
* if the ring is busy and still processing
* the same request, so that no single request
* can run indefinitely (such as a chain of
* batches). The only time we do not increment
* the hangcheck score on this ring, if this
* ring is in a legitimate wait for another
* ring. In that case the waiting ring is a
* victim and we want to be sure we catch the
* right culprit. Then every time we do kick
* the ring, add a small increment to the
* score so that we can catch a batch that is
* being repeatedly kicked and so responsible
* for stalling the machine.
*/
ring->hangcheck.action = ring_stuck(ring,
acthd);
switch (ring->hangcheck.action) {
case HANGCHECK_IDLE:
case HANGCHECK_WAIT:
break;
case HANGCHECK_ACTIVE:
ring->hangcheck.score += BUSY;
break;
case HANGCHECK_KICK:
ring->hangcheck.score += KICK;
break;
case HANGCHECK_HUNG:
ring->hangcheck.score += HUNG;
stuck[i] = true;
break;
}
drm/i915: detect hang using per ring hangcheck_score Keep track of ring seqno progress and if there are no progress detected, declare hang. Use actual head (acthd) to distinguish between ring stuck and batchbuffer looping situation. Stuck ring will be kicked to trigger progress. This commit adds a hard limit for batchbuffer completion time. If batchbuffer completion time is more than 4.5 seconds, the gpu will be declared hung. Review comment from Ben which nicely clarifies the semantic change: "Maybe I'm just stating the functional changes of the patch, but in case they were unintended here is what I see as potential issues: 1. "If ring B is waiting on ring A via semaphore, and ring A is making progress, albeit slowly - the hangcheck will fire. The check will determine that A is moving, however ring B will appear hung because the ACTHD doesn't move. I honestly can't say if that's actually a realistic problem to hit it probably implies the timeout value is too low. 2. "There's also another corner case on the kick. If the seqno = 2 (though not stuck), and on the 3rd hangcheck, the ring is stuck, and we try to kick it... we don't actually try to find out if the kick helped" v2: use atchd to detect stuck ring from loop (Ben Widawsky) v3: Use acthd to check when ring needs kicking. Declare hang on third time in order to give time for kick_ring to take effect. v4: Update commit msg Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Paste in Ben's review comment.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-30 14:04:29 +08:00
}
} else {
ring->hangcheck.action = HANGCHECK_ACTIVE;
/* Gradually reduce the count so that we catch DoS
* attempts across multiple batches.
*/
if (ring->hangcheck.score > 0)
ring->hangcheck.score--;
}
drm/i915: detect hang using per ring hangcheck_score Keep track of ring seqno progress and if there are no progress detected, declare hang. Use actual head (acthd) to distinguish between ring stuck and batchbuffer looping situation. Stuck ring will be kicked to trigger progress. This commit adds a hard limit for batchbuffer completion time. If batchbuffer completion time is more than 4.5 seconds, the gpu will be declared hung. Review comment from Ben which nicely clarifies the semantic change: "Maybe I'm just stating the functional changes of the patch, but in case they were unintended here is what I see as potential issues: 1. "If ring B is waiting on ring A via semaphore, and ring A is making progress, albeit slowly - the hangcheck will fire. The check will determine that A is moving, however ring B will appear hung because the ACTHD doesn't move. I honestly can't say if that's actually a realistic problem to hit it probably implies the timeout value is too low. 2. "There's also another corner case on the kick. If the seqno = 2 (though not stuck), and on the 3rd hangcheck, the ring is stuck, and we try to kick it... we don't actually try to find out if the kick helped" v2: use atchd to detect stuck ring from loop (Ben Widawsky) v3: Use acthd to check when ring needs kicking. Declare hang on third time in order to give time for kick_ring to take effect. v4: Update commit msg Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Paste in Ben's review comment.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-30 14:04:29 +08:00
ring->hangcheck.seqno = seqno;
ring->hangcheck.acthd = acthd;
busy_count += busy;
}
for_each_ring(ring, dev_priv, i) {
if (ring->hangcheck.score > FIRE) {
DRM_INFO("%s on %s\n",
stuck[i] ? "stuck" : "no progress",
ring->name);
rings_hung++;
}
}
drm/i915: detect hang using per ring hangcheck_score Keep track of ring seqno progress and if there are no progress detected, declare hang. Use actual head (acthd) to distinguish between ring stuck and batchbuffer looping situation. Stuck ring will be kicked to trigger progress. This commit adds a hard limit for batchbuffer completion time. If batchbuffer completion time is more than 4.5 seconds, the gpu will be declared hung. Review comment from Ben which nicely clarifies the semantic change: "Maybe I'm just stating the functional changes of the patch, but in case they were unintended here is what I see as potential issues: 1. "If ring B is waiting on ring A via semaphore, and ring A is making progress, albeit slowly - the hangcheck will fire. The check will determine that A is moving, however ring B will appear hung because the ACTHD doesn't move. I honestly can't say if that's actually a realistic problem to hit it probably implies the timeout value is too low. 2. "There's also another corner case on the kick. If the seqno = 2 (though not stuck), and on the 3rd hangcheck, the ring is stuck, and we try to kick it... we don't actually try to find out if the kick helped" v2: use atchd to detect stuck ring from loop (Ben Widawsky) v3: Use acthd to check when ring needs kicking. Declare hang on third time in order to give time for kick_ring to take effect. v4: Update commit msg Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Paste in Ben's review comment.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-30 14:04:29 +08:00
if (rings_hung)
return i915_handle_error(dev, true);
drm/i915: detect hang using per ring hangcheck_score Keep track of ring seqno progress and if there are no progress detected, declare hang. Use actual head (acthd) to distinguish between ring stuck and batchbuffer looping situation. Stuck ring will be kicked to trigger progress. This commit adds a hard limit for batchbuffer completion time. If batchbuffer completion time is more than 4.5 seconds, the gpu will be declared hung. Review comment from Ben which nicely clarifies the semantic change: "Maybe I'm just stating the functional changes of the patch, but in case they were unintended here is what I see as potential issues: 1. "If ring B is waiting on ring A via semaphore, and ring A is making progress, albeit slowly - the hangcheck will fire. The check will determine that A is moving, however ring B will appear hung because the ACTHD doesn't move. I honestly can't say if that's actually a realistic problem to hit it probably implies the timeout value is too low. 2. "There's also another corner case on the kick. If the seqno = 2 (though not stuck), and on the 3rd hangcheck, the ring is stuck, and we try to kick it... we don't actually try to find out if the kick helped" v2: use atchd to detect stuck ring from loop (Ben Widawsky) v3: Use acthd to check when ring needs kicking. Declare hang on third time in order to give time for kick_ring to take effect. v4: Update commit msg Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Paste in Ben's review comment.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-30 14:04:29 +08:00
if (busy_count)
/* Reset timer case chip hangs without another request
* being added */
i915_queue_hangcheck(dev);
}
void i915_queue_hangcheck(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (!i915_enable_hangcheck)
return;
mod_timer(&dev_priv->gpu_error.hangcheck_timer,
round_jiffies_up(jiffies + DRM_I915_HANGCHECK_JIFFIES));
}
static void ibx_irq_preinstall(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (HAS_PCH_NOP(dev))
return;
/* south display irq */
I915_WRITE(SDEIMR, 0xffffffff);
/*
* SDEIER is also touched by the interrupt handler to work around missed
* PCH interrupts. Hence we can't update it after the interrupt handler
* is enabled - instead we unconditionally enable all PCH interrupt
* sources here, but then only unmask them as needed with SDEIMR.
*/
I915_WRITE(SDEIER, 0xffffffff);
POSTING_READ(SDEIER);
}
static void gen5_gt_irq_preinstall(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
/* and GT */
I915_WRITE(GTIMR, 0xffffffff);
I915_WRITE(GTIER, 0x0);
POSTING_READ(GTIER);
if (INTEL_INFO(dev)->gen >= 6) {
/* and PM */
I915_WRITE(GEN6_PMIMR, 0xffffffff);
I915_WRITE(GEN6_PMIER, 0x0);
POSTING_READ(GEN6_PMIER);
}
}
/* drm_dma.h hooks
*/
static void ironlake_irq_preinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
atomic_set(&dev_priv->irq_received, 0);
I915_WRITE(HWSTAM, 0xeffe);
I915_WRITE(DEIMR, 0xffffffff);
I915_WRITE(DEIER, 0x0);
POSTING_READ(DEIER);
gen5_gt_irq_preinstall(dev);
ibx_irq_preinstall(dev);
}
static void valleyview_irq_preinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
atomic_set(&dev_priv->irq_received, 0);
/* VLV magic */
I915_WRITE(VLV_IMR, 0);
I915_WRITE(RING_IMR(RENDER_RING_BASE), 0);
I915_WRITE(RING_IMR(GEN6_BSD_RING_BASE), 0);
I915_WRITE(RING_IMR(BLT_RING_BASE), 0);
/* and GT */
I915_WRITE(GTIIR, I915_READ(GTIIR));
I915_WRITE(GTIIR, I915_READ(GTIIR));
gen5_gt_irq_preinstall(dev);
I915_WRITE(DPINVGTT, 0xff);
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
for_each_pipe(pipe)
I915_WRITE(PIPESTAT(pipe), 0xffff);
I915_WRITE(VLV_IIR, 0xffffffff);
I915_WRITE(VLV_IMR, 0xffffffff);
I915_WRITE(VLV_IER, 0x0);
POSTING_READ(VLV_IER);
}
drm/i915: implement ibx_hpd_irq_setup This fixes a regression introduced in commit e5868a318d1ae28f760f77bb91ce5deb751733fd Author: Egbert Eich <eich@suse.de> Date: Thu Feb 28 04:17:12 2013 -0500 DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encode Due to the irq setup rework in 3.9, see commit 20afbda209d708be66944907966486d0c1331cb8 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Dec 11 14:05:07 2012 +0100 drm/i915: Fixup hpd irq register setup ordering Egbert Eich's hpd rework blows up on pch-split platforms - it walks the encoder list before that has been set up completely. The new init sequence is: 1. irq enabling 2. modeset init 3. hpd setup We need to move around the ibx setup a bit to fix this. Ville Syrjälä pointed out in his review that we can't touch SDEIER after the interrupt handler is set up, since that'll race with Paulo Zanoni's PCH interrupt race fix: commit 44498aea293b37af1d463acd9658cdce1ecdf427 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Feb 22 17:05:28 2013 -0300 drm/i915: also disable south interrupts when handling them We fix that by unconditionally enabling all interrupts in SDEIER, but masking them as-needed in SDEIMR. Since only the single-threaded setup/teardown (or suspend/resume) code touches that, no further locking is required. While at it also simplify the mask handling - we start out with all interrupts cleared in the postinstall hook, and never enable a hpd interrupt before hpd_irq_setup is called. And finally, for consistency rename the ibx hpd setup function to ibx_hpd_irq_setup. v2: Fix race around SDEIER writes (Ville). v3: Remove the superflous posting read for SDEIER, spotted by Ville. Ville also wondered whether we shouldn't clear SDEIIR, since now SDE interrupts are enabled before we have an irq handler installed. But the master interrupt control bit in DEIER is still cleared, so we should be fine. Cc: Egbert Eich <eich@suse.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62798 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-27 22:55:01 +08:00
static void ibx_hpd_irq_setup(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
drm/i915: implement ibx_hpd_irq_setup This fixes a regression introduced in commit e5868a318d1ae28f760f77bb91ce5deb751733fd Author: Egbert Eich <eich@suse.de> Date: Thu Feb 28 04:17:12 2013 -0500 DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encode Due to the irq setup rework in 3.9, see commit 20afbda209d708be66944907966486d0c1331cb8 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Dec 11 14:05:07 2012 +0100 drm/i915: Fixup hpd irq register setup ordering Egbert Eich's hpd rework blows up on pch-split platforms - it walks the encoder list before that has been set up completely. The new init sequence is: 1. irq enabling 2. modeset init 3. hpd setup We need to move around the ibx setup a bit to fix this. Ville Syrjälä pointed out in his review that we can't touch SDEIER after the interrupt handler is set up, since that'll race with Paulo Zanoni's PCH interrupt race fix: commit 44498aea293b37af1d463acd9658cdce1ecdf427 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Feb 22 17:05:28 2013 -0300 drm/i915: also disable south interrupts when handling them We fix that by unconditionally enabling all interrupts in SDEIER, but masking them as-needed in SDEIMR. Since only the single-threaded setup/teardown (or suspend/resume) code touches that, no further locking is required. While at it also simplify the mask handling - we start out with all interrupts cleared in the postinstall hook, and never enable a hpd interrupt before hpd_irq_setup is called. And finally, for consistency rename the ibx hpd setup function to ibx_hpd_irq_setup. v2: Fix race around SDEIER writes (Ville). v3: Remove the superflous posting read for SDEIER, spotted by Ville. Ville also wondered whether we shouldn't clear SDEIIR, since now SDE interrupts are enabled before we have an irq handler installed. But the master interrupt control bit in DEIER is still cleared, so we should be fine. Cc: Egbert Eich <eich@suse.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62798 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-27 22:55:01 +08:00
struct drm_mode_config *mode_config = &dev->mode_config;
struct intel_encoder *intel_encoder;
u32 hotplug_irqs, hotplug, enabled_irqs = 0;
drm/i915: implement ibx_hpd_irq_setup This fixes a regression introduced in commit e5868a318d1ae28f760f77bb91ce5deb751733fd Author: Egbert Eich <eich@suse.de> Date: Thu Feb 28 04:17:12 2013 -0500 DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encode Due to the irq setup rework in 3.9, see commit 20afbda209d708be66944907966486d0c1331cb8 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Dec 11 14:05:07 2012 +0100 drm/i915: Fixup hpd irq register setup ordering Egbert Eich's hpd rework blows up on pch-split platforms - it walks the encoder list before that has been set up completely. The new init sequence is: 1. irq enabling 2. modeset init 3. hpd setup We need to move around the ibx setup a bit to fix this. Ville Syrjälä pointed out in his review that we can't touch SDEIER after the interrupt handler is set up, since that'll race with Paulo Zanoni's PCH interrupt race fix: commit 44498aea293b37af1d463acd9658cdce1ecdf427 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Feb 22 17:05:28 2013 -0300 drm/i915: also disable south interrupts when handling them We fix that by unconditionally enabling all interrupts in SDEIER, but masking them as-needed in SDEIMR. Since only the single-threaded setup/teardown (or suspend/resume) code touches that, no further locking is required. While at it also simplify the mask handling - we start out with all interrupts cleared in the postinstall hook, and never enable a hpd interrupt before hpd_irq_setup is called. And finally, for consistency rename the ibx hpd setup function to ibx_hpd_irq_setup. v2: Fix race around SDEIER writes (Ville). v3: Remove the superflous posting read for SDEIER, spotted by Ville. Ville also wondered whether we shouldn't clear SDEIIR, since now SDE interrupts are enabled before we have an irq handler installed. But the master interrupt control bit in DEIER is still cleared, so we should be fine. Cc: Egbert Eich <eich@suse.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62798 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-27 22:55:01 +08:00
if (HAS_PCH_IBX(dev)) {
hotplug_irqs = SDE_HOTPLUG_MASK;
drm/i915: implement ibx_hpd_irq_setup This fixes a regression introduced in commit e5868a318d1ae28f760f77bb91ce5deb751733fd Author: Egbert Eich <eich@suse.de> Date: Thu Feb 28 04:17:12 2013 -0500 DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encode Due to the irq setup rework in 3.9, see commit 20afbda209d708be66944907966486d0c1331cb8 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Dec 11 14:05:07 2012 +0100 drm/i915: Fixup hpd irq register setup ordering Egbert Eich's hpd rework blows up on pch-split platforms - it walks the encoder list before that has been set up completely. The new init sequence is: 1. irq enabling 2. modeset init 3. hpd setup We need to move around the ibx setup a bit to fix this. Ville Syrjälä pointed out in his review that we can't touch SDEIER after the interrupt handler is set up, since that'll race with Paulo Zanoni's PCH interrupt race fix: commit 44498aea293b37af1d463acd9658cdce1ecdf427 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Feb 22 17:05:28 2013 -0300 drm/i915: also disable south interrupts when handling them We fix that by unconditionally enabling all interrupts in SDEIER, but masking them as-needed in SDEIMR. Since only the single-threaded setup/teardown (or suspend/resume) code touches that, no further locking is required. While at it also simplify the mask handling - we start out with all interrupts cleared in the postinstall hook, and never enable a hpd interrupt before hpd_irq_setup is called. And finally, for consistency rename the ibx hpd setup function to ibx_hpd_irq_setup. v2: Fix race around SDEIER writes (Ville). v3: Remove the superflous posting read for SDEIER, spotted by Ville. Ville also wondered whether we shouldn't clear SDEIIR, since now SDE interrupts are enabled before we have an irq handler installed. But the master interrupt control bit in DEIER is still cleared, so we should be fine. Cc: Egbert Eich <eich@suse.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62798 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-27 22:55:01 +08:00
list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head)
if (dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark == HPD_ENABLED)
enabled_irqs |= hpd_ibx[intel_encoder->hpd_pin];
drm/i915: implement ibx_hpd_irq_setup This fixes a regression introduced in commit e5868a318d1ae28f760f77bb91ce5deb751733fd Author: Egbert Eich <eich@suse.de> Date: Thu Feb 28 04:17:12 2013 -0500 DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encode Due to the irq setup rework in 3.9, see commit 20afbda209d708be66944907966486d0c1331cb8 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Dec 11 14:05:07 2012 +0100 drm/i915: Fixup hpd irq register setup ordering Egbert Eich's hpd rework blows up on pch-split platforms - it walks the encoder list before that has been set up completely. The new init sequence is: 1. irq enabling 2. modeset init 3. hpd setup We need to move around the ibx setup a bit to fix this. Ville Syrjälä pointed out in his review that we can't touch SDEIER after the interrupt handler is set up, since that'll race with Paulo Zanoni's PCH interrupt race fix: commit 44498aea293b37af1d463acd9658cdce1ecdf427 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Feb 22 17:05:28 2013 -0300 drm/i915: also disable south interrupts when handling them We fix that by unconditionally enabling all interrupts in SDEIER, but masking them as-needed in SDEIMR. Since only the single-threaded setup/teardown (or suspend/resume) code touches that, no further locking is required. While at it also simplify the mask handling - we start out with all interrupts cleared in the postinstall hook, and never enable a hpd interrupt before hpd_irq_setup is called. And finally, for consistency rename the ibx hpd setup function to ibx_hpd_irq_setup. v2: Fix race around SDEIER writes (Ville). v3: Remove the superflous posting read for SDEIER, spotted by Ville. Ville also wondered whether we shouldn't clear SDEIIR, since now SDE interrupts are enabled before we have an irq handler installed. But the master interrupt control bit in DEIER is still cleared, so we should be fine. Cc: Egbert Eich <eich@suse.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62798 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-27 22:55:01 +08:00
} else {
hotplug_irqs = SDE_HOTPLUG_MASK_CPT;
drm/i915: implement ibx_hpd_irq_setup This fixes a regression introduced in commit e5868a318d1ae28f760f77bb91ce5deb751733fd Author: Egbert Eich <eich@suse.de> Date: Thu Feb 28 04:17:12 2013 -0500 DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encode Due to the irq setup rework in 3.9, see commit 20afbda209d708be66944907966486d0c1331cb8 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Dec 11 14:05:07 2012 +0100 drm/i915: Fixup hpd irq register setup ordering Egbert Eich's hpd rework blows up on pch-split platforms - it walks the encoder list before that has been set up completely. The new init sequence is: 1. irq enabling 2. modeset init 3. hpd setup We need to move around the ibx setup a bit to fix this. Ville Syrjälä pointed out in his review that we can't touch SDEIER after the interrupt handler is set up, since that'll race with Paulo Zanoni's PCH interrupt race fix: commit 44498aea293b37af1d463acd9658cdce1ecdf427 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Feb 22 17:05:28 2013 -0300 drm/i915: also disable south interrupts when handling them We fix that by unconditionally enabling all interrupts in SDEIER, but masking them as-needed in SDEIMR. Since only the single-threaded setup/teardown (or suspend/resume) code touches that, no further locking is required. While at it also simplify the mask handling - we start out with all interrupts cleared in the postinstall hook, and never enable a hpd interrupt before hpd_irq_setup is called. And finally, for consistency rename the ibx hpd setup function to ibx_hpd_irq_setup. v2: Fix race around SDEIER writes (Ville). v3: Remove the superflous posting read for SDEIER, spotted by Ville. Ville also wondered whether we shouldn't clear SDEIIR, since now SDE interrupts are enabled before we have an irq handler installed. But the master interrupt control bit in DEIER is still cleared, so we should be fine. Cc: Egbert Eich <eich@suse.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62798 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-27 22:55:01 +08:00
list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head)
if (dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark == HPD_ENABLED)
enabled_irqs |= hpd_cpt[intel_encoder->hpd_pin];
drm/i915: implement ibx_hpd_irq_setup This fixes a regression introduced in commit e5868a318d1ae28f760f77bb91ce5deb751733fd Author: Egbert Eich <eich@suse.de> Date: Thu Feb 28 04:17:12 2013 -0500 DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encode Due to the irq setup rework in 3.9, see commit 20afbda209d708be66944907966486d0c1331cb8 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Dec 11 14:05:07 2012 +0100 drm/i915: Fixup hpd irq register setup ordering Egbert Eich's hpd rework blows up on pch-split platforms - it walks the encoder list before that has been set up completely. The new init sequence is: 1. irq enabling 2. modeset init 3. hpd setup We need to move around the ibx setup a bit to fix this. Ville Syrjälä pointed out in his review that we can't touch SDEIER after the interrupt handler is set up, since that'll race with Paulo Zanoni's PCH interrupt race fix: commit 44498aea293b37af1d463acd9658cdce1ecdf427 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Feb 22 17:05:28 2013 -0300 drm/i915: also disable south interrupts when handling them We fix that by unconditionally enabling all interrupts in SDEIER, but masking them as-needed in SDEIMR. Since only the single-threaded setup/teardown (or suspend/resume) code touches that, no further locking is required. While at it also simplify the mask handling - we start out with all interrupts cleared in the postinstall hook, and never enable a hpd interrupt before hpd_irq_setup is called. And finally, for consistency rename the ibx hpd setup function to ibx_hpd_irq_setup. v2: Fix race around SDEIER writes (Ville). v3: Remove the superflous posting read for SDEIER, spotted by Ville. Ville also wondered whether we shouldn't clear SDEIIR, since now SDE interrupts are enabled before we have an irq handler installed. But the master interrupt control bit in DEIER is still cleared, so we should be fine. Cc: Egbert Eich <eich@suse.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62798 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-27 22:55:01 +08:00
}
ibx_display_interrupt_update(dev_priv, hotplug_irqs, enabled_irqs);
drm/i915: implement ibx_hpd_irq_setup This fixes a regression introduced in commit e5868a318d1ae28f760f77bb91ce5deb751733fd Author: Egbert Eich <eich@suse.de> Date: Thu Feb 28 04:17:12 2013 -0500 DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encode Due to the irq setup rework in 3.9, see commit 20afbda209d708be66944907966486d0c1331cb8 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Dec 11 14:05:07 2012 +0100 drm/i915: Fixup hpd irq register setup ordering Egbert Eich's hpd rework blows up on pch-split platforms - it walks the encoder list before that has been set up completely. The new init sequence is: 1. irq enabling 2. modeset init 3. hpd setup We need to move around the ibx setup a bit to fix this. Ville Syrjälä pointed out in his review that we can't touch SDEIER after the interrupt handler is set up, since that'll race with Paulo Zanoni's PCH interrupt race fix: commit 44498aea293b37af1d463acd9658cdce1ecdf427 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Feb 22 17:05:28 2013 -0300 drm/i915: also disable south interrupts when handling them We fix that by unconditionally enabling all interrupts in SDEIER, but masking them as-needed in SDEIMR. Since only the single-threaded setup/teardown (or suspend/resume) code touches that, no further locking is required. While at it also simplify the mask handling - we start out with all interrupts cleared in the postinstall hook, and never enable a hpd interrupt before hpd_irq_setup is called. And finally, for consistency rename the ibx hpd setup function to ibx_hpd_irq_setup. v2: Fix race around SDEIER writes (Ville). v3: Remove the superflous posting read for SDEIER, spotted by Ville. Ville also wondered whether we shouldn't clear SDEIIR, since now SDE interrupts are enabled before we have an irq handler installed. But the master interrupt control bit in DEIER is still cleared, so we should be fine. Cc: Egbert Eich <eich@suse.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62798 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-27 22:55:01 +08:00
/*
* Enable digital hotplug on the PCH, and configure the DP short pulse
* duration to 2ms (which is the minimum in the Display Port spec)
*
* This register is the same on all known PCH chips.
*/
hotplug = I915_READ(PCH_PORT_HOTPLUG);
hotplug &= ~(PORTD_PULSE_DURATION_MASK|PORTC_PULSE_DURATION_MASK|PORTB_PULSE_DURATION_MASK);
hotplug |= PORTD_HOTPLUG_ENABLE | PORTD_PULSE_DURATION_2ms;
hotplug |= PORTC_HOTPLUG_ENABLE | PORTC_PULSE_DURATION_2ms;
hotplug |= PORTB_HOTPLUG_ENABLE | PORTB_PULSE_DURATION_2ms;
I915_WRITE(PCH_PORT_HOTPLUG, hotplug);
}
static void ibx_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
drm/i915: implement ibx_hpd_irq_setup This fixes a regression introduced in commit e5868a318d1ae28f760f77bb91ce5deb751733fd Author: Egbert Eich <eich@suse.de> Date: Thu Feb 28 04:17:12 2013 -0500 DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encode Due to the irq setup rework in 3.9, see commit 20afbda209d708be66944907966486d0c1331cb8 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Dec 11 14:05:07 2012 +0100 drm/i915: Fixup hpd irq register setup ordering Egbert Eich's hpd rework blows up on pch-split platforms - it walks the encoder list before that has been set up completely. The new init sequence is: 1. irq enabling 2. modeset init 3. hpd setup We need to move around the ibx setup a bit to fix this. Ville Syrjälä pointed out in his review that we can't touch SDEIER after the interrupt handler is set up, since that'll race with Paulo Zanoni's PCH interrupt race fix: commit 44498aea293b37af1d463acd9658cdce1ecdf427 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Feb 22 17:05:28 2013 -0300 drm/i915: also disable south interrupts when handling them We fix that by unconditionally enabling all interrupts in SDEIER, but masking them as-needed in SDEIMR. Since only the single-threaded setup/teardown (or suspend/resume) code touches that, no further locking is required. While at it also simplify the mask handling - we start out with all interrupts cleared in the postinstall hook, and never enable a hpd interrupt before hpd_irq_setup is called. And finally, for consistency rename the ibx hpd setup function to ibx_hpd_irq_setup. v2: Fix race around SDEIER writes (Ville). v3: Remove the superflous posting read for SDEIER, spotted by Ville. Ville also wondered whether we shouldn't clear SDEIIR, since now SDE interrupts are enabled before we have an irq handler installed. But the master interrupt control bit in DEIER is still cleared, so we should be fine. Cc: Egbert Eich <eich@suse.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62798 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-27 22:55:01 +08:00
u32 mask;
if (HAS_PCH_NOP(dev))
return;
if (HAS_PCH_IBX(dev)) {
mask = SDE_GMBUS | SDE_AUX_MASK | SDE_TRANSB_FIFO_UNDER |
SDE_TRANSA_FIFO_UNDER | SDE_POISON;
} else {
mask = SDE_GMBUS_CPT | SDE_AUX_MASK_CPT | SDE_ERROR_CPT;
I915_WRITE(SERR_INT, I915_READ(SERR_INT));
}
I915_WRITE(SDEIIR, I915_READ(SDEIIR));
I915_WRITE(SDEIMR, ~mask);
}
drm/i915: unify GT/PM irq postinstall code Again extract a common helper. For the postinstall hook things are a bit more complicated since we have more cases on ilk-hsw/vlv here. But since vlv was clearly broken by failing to initialize dev_priv->gt_irq_mask correctly the shared code is clearly justified. Also kill the PMIER setting in the async rps enable work. I should have been save, but also clearly looked rather fragile. PMIER setup is now all down in the irq pre/postinstall hooks. With this we now have the usual interrupt register sequence for GT/PM irq registers: - IER is setup once with all the interrupts we ever need in the postinstall hook and never touched again. Exceptions are SDEIER, which is touched in the preinstall hook (when the irq handler isn't enabled) and then only from the irq handler. And DEIER/VLV_IER with is used in the irq handler but also written to once in the postinstall hook. But since that write is essentially what enables the interrupt and we should always have MSI interrupts we should be save. In case we ever have non-MSI interrupts we'd be screwed. - IIR is cleared in the postinstall hook before we enable/unmask the respective interrupt sources. Hence we can't steal an interrupt event an accidentally trigger the spurious interrupt logic in the core kernel. Note that after some discussion with Ben Widawsky we think that we actually should clear the IIR registers in the preinstall hook. But doing that is a much larger patch series. - IMR regs are (usually) all masked off. Those are the only regs changed at runtime, which is all protected by dev_priv->irq_lock. This unification also kills the cargo-culted read-modify-write PM register setup for VECS. Interrupt setup is done without userspace being able to interfere, so we better know what values we want to put into those registers. RMW cycles otoh are really good at papering over races, until stuff magically blows up and no one has a clue why. v2: Touch the gen6+ PM interrupt registers only on gen6+. v3: Improve the commit message to more clearly spell out why we want to unify the code and what exactly changes. Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Paulo Zanoni <przanoni@gmail.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Add a comment to explain why the l3 parity interrupt is special.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-13 04:43:26 +08:00
static void gen5_gt_irq_postinstall(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pm_irqs, gt_irqs;
pm_irqs = gt_irqs = 0;
dev_priv->gt_irq_mask = ~0;
if (HAS_L3_DPF(dev)) {
drm/i915: unify GT/PM irq postinstall code Again extract a common helper. For the postinstall hook things are a bit more complicated since we have more cases on ilk-hsw/vlv here. But since vlv was clearly broken by failing to initialize dev_priv->gt_irq_mask correctly the shared code is clearly justified. Also kill the PMIER setting in the async rps enable work. I should have been save, but also clearly looked rather fragile. PMIER setup is now all down in the irq pre/postinstall hooks. With this we now have the usual interrupt register sequence for GT/PM irq registers: - IER is setup once with all the interrupts we ever need in the postinstall hook and never touched again. Exceptions are SDEIER, which is touched in the preinstall hook (when the irq handler isn't enabled) and then only from the irq handler. And DEIER/VLV_IER with is used in the irq handler but also written to once in the postinstall hook. But since that write is essentially what enables the interrupt and we should always have MSI interrupts we should be save. In case we ever have non-MSI interrupts we'd be screwed. - IIR is cleared in the postinstall hook before we enable/unmask the respective interrupt sources. Hence we can't steal an interrupt event an accidentally trigger the spurious interrupt logic in the core kernel. Note that after some discussion with Ben Widawsky we think that we actually should clear the IIR registers in the preinstall hook. But doing that is a much larger patch series. - IMR regs are (usually) all masked off. Those are the only regs changed at runtime, which is all protected by dev_priv->irq_lock. This unification also kills the cargo-culted read-modify-write PM register setup for VECS. Interrupt setup is done without userspace being able to interfere, so we better know what values we want to put into those registers. RMW cycles otoh are really good at papering over races, until stuff magically blows up and no one has a clue why. v2: Touch the gen6+ PM interrupt registers only on gen6+. v3: Improve the commit message to more clearly spell out why we want to unify the code and what exactly changes. Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Paulo Zanoni <przanoni@gmail.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Add a comment to explain why the l3 parity interrupt is special.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-13 04:43:26 +08:00
/* L3 parity interrupt is always unmasked. */
dev_priv->gt_irq_mask = ~GT_PARITY_ERROR(dev);
gt_irqs |= GT_PARITY_ERROR(dev);
drm/i915: unify GT/PM irq postinstall code Again extract a common helper. For the postinstall hook things are a bit more complicated since we have more cases on ilk-hsw/vlv here. But since vlv was clearly broken by failing to initialize dev_priv->gt_irq_mask correctly the shared code is clearly justified. Also kill the PMIER setting in the async rps enable work. I should have been save, but also clearly looked rather fragile. PMIER setup is now all down in the irq pre/postinstall hooks. With this we now have the usual interrupt register sequence for GT/PM irq registers: - IER is setup once with all the interrupts we ever need in the postinstall hook and never touched again. Exceptions are SDEIER, which is touched in the preinstall hook (when the irq handler isn't enabled) and then only from the irq handler. And DEIER/VLV_IER with is used in the irq handler but also written to once in the postinstall hook. But since that write is essentially what enables the interrupt and we should always have MSI interrupts we should be save. In case we ever have non-MSI interrupts we'd be screwed. - IIR is cleared in the postinstall hook before we enable/unmask the respective interrupt sources. Hence we can't steal an interrupt event an accidentally trigger the spurious interrupt logic in the core kernel. Note that after some discussion with Ben Widawsky we think that we actually should clear the IIR registers in the preinstall hook. But doing that is a much larger patch series. - IMR regs are (usually) all masked off. Those are the only regs changed at runtime, which is all protected by dev_priv->irq_lock. This unification also kills the cargo-culted read-modify-write PM register setup for VECS. Interrupt setup is done without userspace being able to interfere, so we better know what values we want to put into those registers. RMW cycles otoh are really good at papering over races, until stuff magically blows up and no one has a clue why. v2: Touch the gen6+ PM interrupt registers only on gen6+. v3: Improve the commit message to more clearly spell out why we want to unify the code and what exactly changes. Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Paulo Zanoni <przanoni@gmail.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Add a comment to explain why the l3 parity interrupt is special.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-13 04:43:26 +08:00
}
gt_irqs |= GT_RENDER_USER_INTERRUPT;
if (IS_GEN5(dev)) {
gt_irqs |= GT_RENDER_PIPECTL_NOTIFY_INTERRUPT |
ILK_BSD_USER_INTERRUPT;
} else {
gt_irqs |= GT_BLT_USER_INTERRUPT | GT_BSD_USER_INTERRUPT;
}
I915_WRITE(GTIIR, I915_READ(GTIIR));
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
I915_WRITE(GTIER, gt_irqs);
POSTING_READ(GTIER);
if (INTEL_INFO(dev)->gen >= 6) {
pm_irqs |= GEN6_PM_RPS_EVENTS;
if (HAS_VEBOX(dev))
pm_irqs |= PM_VEBOX_USER_INTERRUPT;
dev_priv->pm_irq_mask = 0xffffffff;
drm/i915: unify GT/PM irq postinstall code Again extract a common helper. For the postinstall hook things are a bit more complicated since we have more cases on ilk-hsw/vlv here. But since vlv was clearly broken by failing to initialize dev_priv->gt_irq_mask correctly the shared code is clearly justified. Also kill the PMIER setting in the async rps enable work. I should have been save, but also clearly looked rather fragile. PMIER setup is now all down in the irq pre/postinstall hooks. With this we now have the usual interrupt register sequence for GT/PM irq registers: - IER is setup once with all the interrupts we ever need in the postinstall hook and never touched again. Exceptions are SDEIER, which is touched in the preinstall hook (when the irq handler isn't enabled) and then only from the irq handler. And DEIER/VLV_IER with is used in the irq handler but also written to once in the postinstall hook. But since that write is essentially what enables the interrupt and we should always have MSI interrupts we should be save. In case we ever have non-MSI interrupts we'd be screwed. - IIR is cleared in the postinstall hook before we enable/unmask the respective interrupt sources. Hence we can't steal an interrupt event an accidentally trigger the spurious interrupt logic in the core kernel. Note that after some discussion with Ben Widawsky we think that we actually should clear the IIR registers in the preinstall hook. But doing that is a much larger patch series. - IMR regs are (usually) all masked off. Those are the only regs changed at runtime, which is all protected by dev_priv->irq_lock. This unification also kills the cargo-culted read-modify-write PM register setup for VECS. Interrupt setup is done without userspace being able to interfere, so we better know what values we want to put into those registers. RMW cycles otoh are really good at papering over races, until stuff magically blows up and no one has a clue why. v2: Touch the gen6+ PM interrupt registers only on gen6+. v3: Improve the commit message to more clearly spell out why we want to unify the code and what exactly changes. Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Paulo Zanoni <przanoni@gmail.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Add a comment to explain why the l3 parity interrupt is special.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-13 04:43:26 +08:00
I915_WRITE(GEN6_PMIIR, I915_READ(GEN6_PMIIR));
I915_WRITE(GEN6_PMIMR, dev_priv->pm_irq_mask);
drm/i915: unify GT/PM irq postinstall code Again extract a common helper. For the postinstall hook things are a bit more complicated since we have more cases on ilk-hsw/vlv here. But since vlv was clearly broken by failing to initialize dev_priv->gt_irq_mask correctly the shared code is clearly justified. Also kill the PMIER setting in the async rps enable work. I should have been save, but also clearly looked rather fragile. PMIER setup is now all down in the irq pre/postinstall hooks. With this we now have the usual interrupt register sequence for GT/PM irq registers: - IER is setup once with all the interrupts we ever need in the postinstall hook and never touched again. Exceptions are SDEIER, which is touched in the preinstall hook (when the irq handler isn't enabled) and then only from the irq handler. And DEIER/VLV_IER with is used in the irq handler but also written to once in the postinstall hook. But since that write is essentially what enables the interrupt and we should always have MSI interrupts we should be save. In case we ever have non-MSI interrupts we'd be screwed. - IIR is cleared in the postinstall hook before we enable/unmask the respective interrupt sources. Hence we can't steal an interrupt event an accidentally trigger the spurious interrupt logic in the core kernel. Note that after some discussion with Ben Widawsky we think that we actually should clear the IIR registers in the preinstall hook. But doing that is a much larger patch series. - IMR regs are (usually) all masked off. Those are the only regs changed at runtime, which is all protected by dev_priv->irq_lock. This unification also kills the cargo-culted read-modify-write PM register setup for VECS. Interrupt setup is done without userspace being able to interfere, so we better know what values we want to put into those registers. RMW cycles otoh are really good at papering over races, until stuff magically blows up and no one has a clue why. v2: Touch the gen6+ PM interrupt registers only on gen6+. v3: Improve the commit message to more clearly spell out why we want to unify the code and what exactly changes. Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Paulo Zanoni <przanoni@gmail.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Add a comment to explain why the l3 parity interrupt is special.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-13 04:43:26 +08:00
I915_WRITE(GEN6_PMIER, pm_irqs);
POSTING_READ(GEN6_PMIER);
}
}
static int ironlake_irq_postinstall(struct drm_device *dev)
{
unsigned long irqflags;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 display_mask, extra_mask;
if (INTEL_INFO(dev)->gen >= 7) {
display_mask = (DE_MASTER_IRQ_CONTROL | DE_GSE_IVB |
DE_PCH_EVENT_IVB | DE_PLANEC_FLIP_DONE_IVB |
DE_PLANEB_FLIP_DONE_IVB |
DE_PLANEA_FLIP_DONE_IVB | DE_AUX_CHANNEL_A_IVB |
DE_ERR_INT_IVB);
extra_mask = (DE_PIPEC_VBLANK_IVB | DE_PIPEB_VBLANK_IVB |
DE_PIPEA_VBLANK_IVB);
I915_WRITE(GEN7_ERR_INT, I915_READ(GEN7_ERR_INT));
} else {
display_mask = (DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT |
DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE |
DE_AUX_CHANNEL_A | DE_PIPEB_FIFO_UNDERRUN |
DE_PIPEA_FIFO_UNDERRUN | DE_POISON);
extra_mask = DE_PIPEA_VBLANK | DE_PIPEB_VBLANK | DE_PCU_EVENT;
}
dev_priv->irq_mask = ~display_mask;
/* should always can generate irq */
I915_WRITE(DEIIR, I915_READ(DEIIR));
I915_WRITE(DEIMR, dev_priv->irq_mask);
I915_WRITE(DEIER, display_mask | extra_mask);
POSTING_READ(DEIER);
drm/i915: unify GT/PM irq postinstall code Again extract a common helper. For the postinstall hook things are a bit more complicated since we have more cases on ilk-hsw/vlv here. But since vlv was clearly broken by failing to initialize dev_priv->gt_irq_mask correctly the shared code is clearly justified. Also kill the PMIER setting in the async rps enable work. I should have been save, but also clearly looked rather fragile. PMIER setup is now all down in the irq pre/postinstall hooks. With this we now have the usual interrupt register sequence for GT/PM irq registers: - IER is setup once with all the interrupts we ever need in the postinstall hook and never touched again. Exceptions are SDEIER, which is touched in the preinstall hook (when the irq handler isn't enabled) and then only from the irq handler. And DEIER/VLV_IER with is used in the irq handler but also written to once in the postinstall hook. But since that write is essentially what enables the interrupt and we should always have MSI interrupts we should be save. In case we ever have non-MSI interrupts we'd be screwed. - IIR is cleared in the postinstall hook before we enable/unmask the respective interrupt sources. Hence we can't steal an interrupt event an accidentally trigger the spurious interrupt logic in the core kernel. Note that after some discussion with Ben Widawsky we think that we actually should clear the IIR registers in the preinstall hook. But doing that is a much larger patch series. - IMR regs are (usually) all masked off. Those are the only regs changed at runtime, which is all protected by dev_priv->irq_lock. This unification also kills the cargo-culted read-modify-write PM register setup for VECS. Interrupt setup is done without userspace being able to interfere, so we better know what values we want to put into those registers. RMW cycles otoh are really good at papering over races, until stuff magically blows up and no one has a clue why. v2: Touch the gen6+ PM interrupt registers only on gen6+. v3: Improve the commit message to more clearly spell out why we want to unify the code and what exactly changes. Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Paulo Zanoni <przanoni@gmail.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Add a comment to explain why the l3 parity interrupt is special.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-13 04:43:26 +08:00
gen5_gt_irq_postinstall(dev);
ibx_irq_postinstall(dev);
if (IS_IRONLAKE_M(dev)) {
/* Enable PCU event interrupts
*
* spinlocking not required here for correctness since interrupt
* setup is guaranteed to run in single-threaded context. But we
* need it to make the assert_spin_locked happy. */
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
ironlake_enable_display_irq(dev_priv, DE_PCU_EVENT);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
return 0;
}
static int valleyview_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 enable_mask;
u32 pipestat_enable = PLANE_FLIP_DONE_INT_EN_VLV;
unsigned long irqflags;
enable_mask = I915_DISPLAY_PORT_INTERRUPT;
enable_mask |= I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT |
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
/*
*Leave vblank interrupts masked initially. enable/disable will
* toggle them based on usage.
*/
dev_priv->irq_mask = (~enable_mask) |
I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT |
I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
I915_WRITE(PORT_HOTPLUG_EN, 0);
POSTING_READ(PORT_HOTPLUG_EN);
I915_WRITE(VLV_IMR, dev_priv->irq_mask);
I915_WRITE(VLV_IER, enable_mask);
I915_WRITE(VLV_IIR, 0xffffffff);
I915_WRITE(PIPESTAT(0), 0xffff);
I915_WRITE(PIPESTAT(1), 0xffff);
POSTING_READ(VLV_IER);
/* Interrupt setup is already guaranteed to be single-threaded, this is
* just to make the assert_spin_locked check happy. */
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
i915_enable_pipestat(dev_priv, 0, pipestat_enable);
i915_enable_pipestat(dev_priv, 0, PIPE_GMBUS_EVENT_ENABLE);
i915_enable_pipestat(dev_priv, 1, pipestat_enable);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
I915_WRITE(VLV_IIR, 0xffffffff);
I915_WRITE(VLV_IIR, 0xffffffff);
drm/i915: unify GT/PM irq postinstall code Again extract a common helper. For the postinstall hook things are a bit more complicated since we have more cases on ilk-hsw/vlv here. But since vlv was clearly broken by failing to initialize dev_priv->gt_irq_mask correctly the shared code is clearly justified. Also kill the PMIER setting in the async rps enable work. I should have been save, but also clearly looked rather fragile. PMIER setup is now all down in the irq pre/postinstall hooks. With this we now have the usual interrupt register sequence for GT/PM irq registers: - IER is setup once with all the interrupts we ever need in the postinstall hook and never touched again. Exceptions are SDEIER, which is touched in the preinstall hook (when the irq handler isn't enabled) and then only from the irq handler. And DEIER/VLV_IER with is used in the irq handler but also written to once in the postinstall hook. But since that write is essentially what enables the interrupt and we should always have MSI interrupts we should be save. In case we ever have non-MSI interrupts we'd be screwed. - IIR is cleared in the postinstall hook before we enable/unmask the respective interrupt sources. Hence we can't steal an interrupt event an accidentally trigger the spurious interrupt logic in the core kernel. Note that after some discussion with Ben Widawsky we think that we actually should clear the IIR registers in the preinstall hook. But doing that is a much larger patch series. - IMR regs are (usually) all masked off. Those are the only regs changed at runtime, which is all protected by dev_priv->irq_lock. This unification also kills the cargo-culted read-modify-write PM register setup for VECS. Interrupt setup is done without userspace being able to interfere, so we better know what values we want to put into those registers. RMW cycles otoh are really good at papering over races, until stuff magically blows up and no one has a clue why. v2: Touch the gen6+ PM interrupt registers only on gen6+. v3: Improve the commit message to more clearly spell out why we want to unify the code and what exactly changes. Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Paulo Zanoni <przanoni@gmail.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Add a comment to explain why the l3 parity interrupt is special.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-13 04:43:26 +08:00
gen5_gt_irq_postinstall(dev);
/* ack & enable invalid PTE error interrupts */
#if 0 /* FIXME: add support to irq handler for checking these bits */
I915_WRITE(DPINVGTT, DPINVGTT_STATUS_MASK);
I915_WRITE(DPINVGTT, DPINVGTT_EN_MASK);
#endif
I915_WRITE(VLV_MASTER_IER, MASTER_INTERRUPT_ENABLE);
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
return 0;
}
static void valleyview_irq_uninstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
if (!dev_priv)
return;
del_timer_sync(&dev_priv->hotplug_reenable_timer);
for_each_pipe(pipe)
I915_WRITE(PIPESTAT(pipe), 0xffff);
I915_WRITE(HWSTAM, 0xffffffff);
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
for_each_pipe(pipe)
I915_WRITE(PIPESTAT(pipe), 0xffff);
I915_WRITE(VLV_IIR, 0xffffffff);
I915_WRITE(VLV_IMR, 0xffffffff);
I915_WRITE(VLV_IER, 0x0);
POSTING_READ(VLV_IER);
}
static void ironlake_irq_uninstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
if (!dev_priv)
return;
del_timer_sync(&dev_priv->hotplug_reenable_timer);
I915_WRITE(HWSTAM, 0xffffffff);
I915_WRITE(DEIMR, 0xffffffff);
I915_WRITE(DEIER, 0x0);
I915_WRITE(DEIIR, I915_READ(DEIIR));
if (IS_GEN7(dev))
I915_WRITE(GEN7_ERR_INT, I915_READ(GEN7_ERR_INT));
I915_WRITE(GTIMR, 0xffffffff);
I915_WRITE(GTIER, 0x0);
I915_WRITE(GTIIR, I915_READ(GTIIR));
if (HAS_PCH_NOP(dev))
return;
I915_WRITE(SDEIMR, 0xffffffff);
I915_WRITE(SDEIER, 0x0);
I915_WRITE(SDEIIR, I915_READ(SDEIIR));
if (HAS_PCH_CPT(dev) || HAS_PCH_LPT(dev))
I915_WRITE(SERR_INT, I915_READ(SERR_INT));
}
static void i8xx_irq_preinstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
atomic_set(&dev_priv->irq_received, 0);
for_each_pipe(pipe)
I915_WRITE(PIPESTAT(pipe), 0);
I915_WRITE16(IMR, 0xffff);
I915_WRITE16(IER, 0x0);
POSTING_READ16(IER);
}
static int i8xx_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
I915_WRITE16(EMR,
~(I915_ERROR_PAGE_TABLE | I915_ERROR_MEMORY_REFRESH));
/* Unmask the interrupts that we always want on. */
dev_priv->irq_mask =
~(I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT |
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
I915_WRITE16(IMR, dev_priv->irq_mask);
I915_WRITE16(IER,
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT |
I915_USER_INTERRUPT);
POSTING_READ16(IER);
return 0;
}
/*
* Returns true when a page flip has completed.
*/
static bool i8xx_handle_vblank(struct drm_device *dev,
int pipe, u16 iir)
{
drm_i915_private_t *dev_priv = dev->dev_private;
u16 flip_pending = DISPLAY_PLANE_FLIP_PENDING(pipe);
if (!drm_handle_vblank(dev, pipe))
return false;
if ((iir & flip_pending) == 0)
return false;
intel_prepare_page_flip(dev, pipe);
/* We detect FlipDone by looking for the change in PendingFlip from '1'
* to '0' on the following vblank, i.e. IIR has the Pendingflip
* asserted following the MI_DISPLAY_FLIP, but ISR is deasserted, hence
* the flip is completed (no longer pending). Since this doesn't raise
* an interrupt per se, we watch for the change at vblank.
*/
if (I915_READ16(ISR) & flip_pending)
return false;
intel_finish_page_flip(dev, pipe);
return true;
}
static irqreturn_t i8xx_irq_handler(int irq, void *arg)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u16 iir, new_iir;
u32 pipe_stats[2];
unsigned long irqflags;
int pipe;
u16 flip_mask =
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
atomic_inc(&dev_priv->irq_received);
iir = I915_READ16(IIR);
if (iir == 0)
return IRQ_NONE;
while (iir & ~flip_mask) {
/* Can't rely on pipestat interrupt bit in iir as it might
* have been cleared after the pipestat interrupt was received.
* It doesn't set the bit in iir again, but it still produces
* interrupts (for non-MSI).
*/
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
i915_handle_error(dev, false);
for_each_pipe(pipe) {
int reg = PIPESTAT(pipe);
pipe_stats[pipe] = I915_READ(reg);
/*
* Clear the PIPE*STAT regs before the IIR
*/
if (pipe_stats[pipe] & 0x8000ffff) {
if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS)
DRM_DEBUG_DRIVER("pipe %c underrun\n",
pipe_name(pipe));
I915_WRITE(reg, pipe_stats[pipe]);
}
}
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
I915_WRITE16(IIR, iir & ~flip_mask);
new_iir = I915_READ16(IIR); /* Flush posted writes */
i915_update_dri1_breadcrumb(dev);
if (iir & I915_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[RCS]);
if (pipe_stats[0] & PIPE_VBLANK_INTERRUPT_STATUS &&
i8xx_handle_vblank(dev, 0, iir))
flip_mask &= ~DISPLAY_PLANE_FLIP_PENDING(0);
if (pipe_stats[1] & PIPE_VBLANK_INTERRUPT_STATUS &&
i8xx_handle_vblank(dev, 1, iir))
flip_mask &= ~DISPLAY_PLANE_FLIP_PENDING(1);
iir = new_iir;
}
return IRQ_HANDLED;
}
static void i8xx_irq_uninstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
for_each_pipe(pipe) {
/* Clear enable bits; then clear status bits */
I915_WRITE(PIPESTAT(pipe), 0);
I915_WRITE(PIPESTAT(pipe), I915_READ(PIPESTAT(pipe)));
}
I915_WRITE16(IMR, 0xffff);
I915_WRITE16(IER, 0x0);
I915_WRITE16(IIR, I915_READ16(IIR));
}
static void i915_irq_preinstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
atomic_set(&dev_priv->irq_received, 0);
if (I915_HAS_HOTPLUG(dev)) {
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
}
I915_WRITE16(HWSTAM, 0xeffe);
for_each_pipe(pipe)
I915_WRITE(PIPESTAT(pipe), 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
POSTING_READ(IER);
}
static int i915_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 enable_mask;
I915_WRITE(EMR, ~(I915_ERROR_PAGE_TABLE | I915_ERROR_MEMORY_REFRESH));
/* Unmask the interrupts that we always want on. */
dev_priv->irq_mask =
~(I915_ASLE_INTERRUPT |
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT |
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
enable_mask =
I915_ASLE_INTERRUPT |
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT |
I915_USER_INTERRUPT;
if (I915_HAS_HOTPLUG(dev)) {
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
I915_WRITE(PORT_HOTPLUG_EN, 0);
POSTING_READ(PORT_HOTPLUG_EN);
/* Enable in IER... */
enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
/* and unmask in IMR */
dev_priv->irq_mask &= ~I915_DISPLAY_PORT_INTERRUPT;
}
I915_WRITE(IMR, dev_priv->irq_mask);
I915_WRITE(IER, enable_mask);
POSTING_READ(IER);
i915_enable_asle_pipestat(dev);
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
return 0;
}
/*
* Returns true when a page flip has completed.
*/
static bool i915_handle_vblank(struct drm_device *dev,
int plane, int pipe, u32 iir)
{
drm_i915_private_t *dev_priv = dev->dev_private;
u32 flip_pending = DISPLAY_PLANE_FLIP_PENDING(plane);
if (!drm_handle_vblank(dev, pipe))
return false;
if ((iir & flip_pending) == 0)
return false;
intel_prepare_page_flip(dev, plane);
/* We detect FlipDone by looking for the change in PendingFlip from '1'
* to '0' on the following vblank, i.e. IIR has the Pendingflip
* asserted following the MI_DISPLAY_FLIP, but ISR is deasserted, hence
* the flip is completed (no longer pending). Since this doesn't raise
* an interrupt per se, we watch for the change at vblank.
*/
if (I915_READ(ISR) & flip_pending)
return false;
intel_finish_page_flip(dev, pipe);
return true;
}
static irqreturn_t i915_irq_handler(int irq, void *arg)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 iir, new_iir, pipe_stats[I915_MAX_PIPES];
unsigned long irqflags;
u32 flip_mask =
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
int pipe, ret = IRQ_NONE;
atomic_inc(&dev_priv->irq_received);
iir = I915_READ(IIR);
do {
bool irq_received = (iir & ~flip_mask) != 0;
bool blc_event = false;
/* Can't rely on pipestat interrupt bit in iir as it might
* have been cleared after the pipestat interrupt was received.
* It doesn't set the bit in iir again, but it still produces
* interrupts (for non-MSI).
*/
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
i915_handle_error(dev, false);
for_each_pipe(pipe) {
int reg = PIPESTAT(pipe);
pipe_stats[pipe] = I915_READ(reg);
/* Clear the PIPE*STAT regs before the IIR */
if (pipe_stats[pipe] & 0x8000ffff) {
if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS)
DRM_DEBUG_DRIVER("pipe %c underrun\n",
pipe_name(pipe));
I915_WRITE(reg, pipe_stats[pipe]);
irq_received = true;
}
}
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
if (!irq_received)
break;
/* Consume port. Then clear IIR or we'll miss events */
if ((I915_HAS_HOTPLUG(dev)) &&
(iir & I915_DISPLAY_PORT_INTERRUPT)) {
u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
2013-04-16 19:36:54 +08:00
u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_I915;
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
hotplug_status);
intel_hpd_irq_handler(dev, hotplug_trigger, hpd_status_i915);
I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
POSTING_READ(PORT_HOTPLUG_STAT);
}
I915_WRITE(IIR, iir & ~flip_mask);
new_iir = I915_READ(IIR); /* Flush posted writes */
if (iir & I915_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[RCS]);
for_each_pipe(pipe) {
int plane = pipe;
if (IS_MOBILE(dev))
plane = !plane;
if (pipe_stats[pipe] & PIPE_VBLANK_INTERRUPT_STATUS &&
i915_handle_vblank(dev, plane, pipe, iir))
flip_mask &= ~DISPLAY_PLANE_FLIP_PENDING(plane);
if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS)
blc_event = true;
}
if (blc_event || (iir & I915_ASLE_INTERRUPT))
intel_opregion_asle_intr(dev);
/* With MSI, interrupts are only generated when iir
* transitions from zero to nonzero. If another bit got
* set while we were handling the existing iir bits, then
* we would never get another interrupt.
*
* This is fine on non-MSI as well, as if we hit this path
* we avoid exiting the interrupt handler only to generate
* another one.
*
* Note that for MSI this could cause a stray interrupt report
* if an interrupt landed in the time between writing IIR and
* the posting read. This should be rare enough to never
* trigger the 99% of 100,000 interrupts test for disabling
* stray interrupts.
*/
ret = IRQ_HANDLED;
iir = new_iir;
} while (iir & ~flip_mask);
i915_update_dri1_breadcrumb(dev);
return ret;
}
static void i915_irq_uninstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
del_timer_sync(&dev_priv->hotplug_reenable_timer);
if (I915_HAS_HOTPLUG(dev)) {
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
}
I915_WRITE16(HWSTAM, 0xffff);
for_each_pipe(pipe) {
/* Clear enable bits; then clear status bits */
I915_WRITE(PIPESTAT(pipe), 0);
I915_WRITE(PIPESTAT(pipe), I915_READ(PIPESTAT(pipe)));
}
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
I915_WRITE(IIR, I915_READ(IIR));
}
static void i965_irq_preinstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
atomic_set(&dev_priv->irq_received, 0);
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
I915_WRITE(HWSTAM, 0xeffe);
for_each_pipe(pipe)
I915_WRITE(PIPESTAT(pipe), 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
POSTING_READ(IER);
}
static int i965_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 enable_mask;
u32 error_mask;
unsigned long irqflags;
/* Unmask the interrupts that we always want on. */
dev_priv->irq_mask = ~(I915_ASLE_INTERRUPT |
I915_DISPLAY_PORT_INTERRUPT |
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT |
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
enable_mask = ~dev_priv->irq_mask;
enable_mask &= ~(I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT);
enable_mask |= I915_USER_INTERRUPT;
if (IS_G4X(dev))
enable_mask |= I915_BSD_USER_INTERRUPT;
/* Interrupt setup is already guaranteed to be single-threaded, this is
* just to make the assert_spin_locked check happy. */
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
i915_enable_pipestat(dev_priv, 0, PIPE_GMBUS_EVENT_ENABLE);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
/*
* Enable some error detection, note the instruction error mask
* bit is reserved, so we leave it masked.
*/
if (IS_G4X(dev)) {
error_mask = ~(GM45_ERROR_PAGE_TABLE |
GM45_ERROR_MEM_PRIV |
GM45_ERROR_CP_PRIV |
I915_ERROR_MEMORY_REFRESH);
} else {
error_mask = ~(I915_ERROR_PAGE_TABLE |
I915_ERROR_MEMORY_REFRESH);
}
I915_WRITE(EMR, error_mask);
I915_WRITE(IMR, dev_priv->irq_mask);
I915_WRITE(IER, enable_mask);
POSTING_READ(IER);
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
I915_WRITE(PORT_HOTPLUG_EN, 0);
POSTING_READ(PORT_HOTPLUG_EN);
i915_enable_asle_pipestat(dev);
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
return 0;
}
static void i915_hpd_irq_setup(struct drm_device *dev)
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
struct drm_mode_config *mode_config = &dev->mode_config;
struct intel_encoder *intel_encoder;
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
u32 hotplug_en;
assert_spin_locked(&dev_priv->irq_lock);
if (I915_HAS_HOTPLUG(dev)) {
hotplug_en = I915_READ(PORT_HOTPLUG_EN);
hotplug_en &= ~HOTPLUG_INT_EN_MASK;
/* Note HDMI and DP share hotplug bits */
/* enable bits are the same for all generations */
list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head)
if (dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark == HPD_ENABLED)
hotplug_en |= hpd_mask_i915[intel_encoder->hpd_pin];
/* Programming the CRT detection parameters tends
to generate a spurious hotplug event about three
seconds later. So just do it once.
*/
if (IS_G4X(dev))
hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
hotplug_en &= ~CRT_HOTPLUG_VOLTAGE_COMPARE_MASK;
hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
/* Ignore TV since it's buggy */
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
}
}
static irqreturn_t i965_irq_handler(int irq, void *arg)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 iir, new_iir;
u32 pipe_stats[I915_MAX_PIPES];
unsigned long irqflags;
int irq_received;
int ret = IRQ_NONE, pipe;
u32 flip_mask =
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
atomic_inc(&dev_priv->irq_received);
iir = I915_READ(IIR);
for (;;) {
bool blc_event = false;
irq_received = (iir & ~flip_mask) != 0;
/* Can't rely on pipestat interrupt bit in iir as it might
* have been cleared after the pipestat interrupt was received.
* It doesn't set the bit in iir again, but it still produces
* interrupts (for non-MSI).
*/
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
i915_handle_error(dev, false);
for_each_pipe(pipe) {
int reg = PIPESTAT(pipe);
pipe_stats[pipe] = I915_READ(reg);
/*
* Clear the PIPE*STAT regs before the IIR
*/
if (pipe_stats[pipe] & 0x8000ffff) {
if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS)
DRM_DEBUG_DRIVER("pipe %c underrun\n",
pipe_name(pipe));
I915_WRITE(reg, pipe_stats[pipe]);
irq_received = 1;
}
}
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
if (!irq_received)
break;
ret = IRQ_HANDLED;
/* Consume port. Then clear IIR or we'll miss events */
if (iir & I915_DISPLAY_PORT_INTERRUPT) {
u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
2013-04-16 19:36:54 +08:00
u32 hotplug_trigger = hotplug_status & (IS_G4X(dev) ?
HOTPLUG_INT_STATUS_G4X :
HOTPLUG_INT_STATUS_I915);
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
hotplug_status);
intel_hpd_irq_handler(dev, hotplug_trigger,
IS_G4X(dev) ? hpd_status_gen4 : hpd_status_i915);
I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
I915_READ(PORT_HOTPLUG_STAT);
}
I915_WRITE(IIR, iir & ~flip_mask);
new_iir = I915_READ(IIR); /* Flush posted writes */
if (iir & I915_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[RCS]);
if (iir & I915_BSD_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[VCS]);
for_each_pipe(pipe) {
if (pipe_stats[pipe] & PIPE_START_VBLANK_INTERRUPT_STATUS &&
i915_handle_vblank(dev, pipe, pipe, iir))
flip_mask &= ~DISPLAY_PLANE_FLIP_PENDING(pipe);
if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS)
blc_event = true;
}
if (blc_event || (iir & I915_ASLE_INTERRUPT))
intel_opregion_asle_intr(dev);
if (pipe_stats[0] & PIPE_GMBUS_INTERRUPT_STATUS)
gmbus_irq_handler(dev);
/* With MSI, interrupts are only generated when iir
* transitions from zero to nonzero. If another bit got
* set while we were handling the existing iir bits, then
* we would never get another interrupt.
*
* This is fine on non-MSI as well, as if we hit this path
* we avoid exiting the interrupt handler only to generate
* another one.
*
* Note that for MSI this could cause a stray interrupt report
* if an interrupt landed in the time between writing IIR and
* the posting read. This should be rare enough to never
* trigger the 99% of 100,000 interrupts test for disabling
* stray interrupts.
*/
iir = new_iir;
}
i915_update_dri1_breadcrumb(dev);
return ret;
}
static void i965_irq_uninstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
if (!dev_priv)
return;
del_timer_sync(&dev_priv->hotplug_reenable_timer);
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
I915_WRITE(HWSTAM, 0xffffffff);
for_each_pipe(pipe)
I915_WRITE(PIPESTAT(pipe), 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
for_each_pipe(pipe)
I915_WRITE(PIPESTAT(pipe),
I915_READ(PIPESTAT(pipe)) & 0x8000ffff);
I915_WRITE(IIR, I915_READ(IIR));
}
static void i915_reenable_hotplug_timer_func(unsigned long data)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *)data;
struct drm_device *dev = dev_priv->dev;
struct drm_mode_config *mode_config = &dev->mode_config;
unsigned long irqflags;
int i;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
for (i = (HPD_NONE + 1); i < HPD_NUM_PINS; i++) {
struct drm_connector *connector;
if (dev_priv->hpd_stats[i].hpd_mark != HPD_DISABLED)
continue;
dev_priv->hpd_stats[i].hpd_mark = HPD_ENABLED;
list_for_each_entry(connector, &mode_config->connector_list, head) {
struct intel_connector *intel_connector = to_intel_connector(connector);
if (intel_connector->encoder->hpd_pin == i) {
if (connector->polled != intel_connector->polled)
DRM_DEBUG_DRIVER("Reenabling HPD on connector %s\n",
drm_get_connector_name(connector));
connector->polled = intel_connector->polled;
if (!connector->polled)
connector->polled = DRM_CONNECTOR_POLL_HPD;
}
}
}
if (dev_priv->display.hpd_irq_setup)
dev_priv->display.hpd_irq_setup(dev);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
void intel_irq_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
INIT_WORK(&dev_priv->gpu_error.work, i915_error_work_func);
INIT_WORK(&dev_priv->rps.work, gen6_pm_rps_work);
INIT_WORK(&dev_priv->l3_parity.error_work, ivybridge_parity_work);
setup_timer(&dev_priv->gpu_error.hangcheck_timer,
i915_hangcheck_elapsed,
(unsigned long) dev);
setup_timer(&dev_priv->hotplug_reenable_timer, i915_reenable_hotplug_timer_func,
(unsigned long) dev_priv);
pm_qos_add_request(&dev_priv->pm_qos, PM_QOS_CPU_DMA_LATENCY, PM_QOS_DEFAULT_VALUE);
drm/i915: irq-drive the dp aux communication At least on the platforms that have a dp aux irq and also have it enabled - vlvhsw should have one, too. But I don't have a machine to test this on. Judging from docs there's no dp aux interrupt for gm45. Also, I only have an ivb cpu edp machine, so the dp aux A code for snb/ilk is untested. For dpcd probing when nothing is connected it slashes about 5ms of cpu time (cpu time is now negligible), which agrees with 3 * 5 400 usec timeouts. A previous version of this patch increases the time required to go through the dp_detect cycle (which includes reading the edid) from around 33 ms to around 40 ms. Experiments indicated that this is purely due to the irq latency - the hw doesn't allow us to queue up dp aux transactions and hence irq latency directly affects throughput. gmbus is much better, there we have a 8 byte buffer, and we get the irq once another 4 bytes can be queued up. But by using the pm_qos interface to request the lowest possible cpu wake-up latency this slowdown completely disappeared. Since all our output detection logic is single-threaded with the mode_config mutex right now anyway, I've decide not ot play fancy and to just reuse the gmbus wait queue. But this would definitely prep the way to run dp detection on different ports in parallel v2: Add a timeout for dp aux transfers when using interrupts - the hw _does_ prevent this with the hw-based 400 usec timeout, but if the irq somehow doesn't arrive we're screwed. Lesson learned while developing this ;-) v3: While at it also convert the busy-loop to wait_for_atomic, so that we don't run the risk of an infinite loop any more. v4: Ensure we have the smallest possible irq latency by using the pm_qos interface. v5: Add a comment to the code to explain why we frob pm_qos. Suggested by Chris Wilson. v6: Disable dp irq for vlv, that's easier than trying to get at docs and hw. v7: Squash in a fix for Haswell that Paulo Zanoni tracked down - the dp aux registers aren't at a fixed offset any more, but can be on the PCH while the DP port is on the cpu die. Reviewed-by: Imre Deak <imre.deak@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-01 20:53:48 +08:00
dev->driver->get_vblank_counter = i915_get_vblank_counter;
dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */
dev->driver->get_vblank_counter = gm45_get_vblank_counter;
}
if (drm_core_check_feature(dev, DRIVER_MODESET))
dev->driver->get_vblank_timestamp = i915_get_vblank_timestamp;
else
dev->driver->get_vblank_timestamp = NULL;
dev->driver->get_scanout_position = i915_get_crtc_scanoutpos;
if (IS_VALLEYVIEW(dev)) {
dev->driver->irq_handler = valleyview_irq_handler;
dev->driver->irq_preinstall = valleyview_irq_preinstall;
dev->driver->irq_postinstall = valleyview_irq_postinstall;
dev->driver->irq_uninstall = valleyview_irq_uninstall;
dev->driver->enable_vblank = valleyview_enable_vblank;
dev->driver->disable_vblank = valleyview_disable_vblank;
dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
} else if (HAS_PCH_SPLIT(dev)) {
dev->driver->irq_handler = ironlake_irq_handler;
dev->driver->irq_preinstall = ironlake_irq_preinstall;
dev->driver->irq_postinstall = ironlake_irq_postinstall;
dev->driver->irq_uninstall = ironlake_irq_uninstall;
dev->driver->enable_vblank = ironlake_enable_vblank;
dev->driver->disable_vblank = ironlake_disable_vblank;
drm/i915: implement ibx_hpd_irq_setup This fixes a regression introduced in commit e5868a318d1ae28f760f77bb91ce5deb751733fd Author: Egbert Eich <eich@suse.de> Date: Thu Feb 28 04:17:12 2013 -0500 DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encode Due to the irq setup rework in 3.9, see commit 20afbda209d708be66944907966486d0c1331cb8 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Dec 11 14:05:07 2012 +0100 drm/i915: Fixup hpd irq register setup ordering Egbert Eich's hpd rework blows up on pch-split platforms - it walks the encoder list before that has been set up completely. The new init sequence is: 1. irq enabling 2. modeset init 3. hpd setup We need to move around the ibx setup a bit to fix this. Ville Syrjälä pointed out in his review that we can't touch SDEIER after the interrupt handler is set up, since that'll race with Paulo Zanoni's PCH interrupt race fix: commit 44498aea293b37af1d463acd9658cdce1ecdf427 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Feb 22 17:05:28 2013 -0300 drm/i915: also disable south interrupts when handling them We fix that by unconditionally enabling all interrupts in SDEIER, but masking them as-needed in SDEIMR. Since only the single-threaded setup/teardown (or suspend/resume) code touches that, no further locking is required. While at it also simplify the mask handling - we start out with all interrupts cleared in the postinstall hook, and never enable a hpd interrupt before hpd_irq_setup is called. And finally, for consistency rename the ibx hpd setup function to ibx_hpd_irq_setup. v2: Fix race around SDEIER writes (Ville). v3: Remove the superflous posting read for SDEIER, spotted by Ville. Ville also wondered whether we shouldn't clear SDEIIR, since now SDE interrupts are enabled before we have an irq handler installed. But the master interrupt control bit in DEIER is still cleared, so we should be fine. Cc: Egbert Eich <eich@suse.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62798 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-27 22:55:01 +08:00
dev_priv->display.hpd_irq_setup = ibx_hpd_irq_setup;
} else {
if (INTEL_INFO(dev)->gen == 2) {
dev->driver->irq_preinstall = i8xx_irq_preinstall;
dev->driver->irq_postinstall = i8xx_irq_postinstall;
dev->driver->irq_handler = i8xx_irq_handler;
dev->driver->irq_uninstall = i8xx_irq_uninstall;
} else if (INTEL_INFO(dev)->gen == 3) {
dev->driver->irq_preinstall = i915_irq_preinstall;
dev->driver->irq_postinstall = i915_irq_postinstall;
dev->driver->irq_uninstall = i915_irq_uninstall;
dev->driver->irq_handler = i915_irq_handler;
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
} else {
dev->driver->irq_preinstall = i965_irq_preinstall;
dev->driver->irq_postinstall = i965_irq_postinstall;
dev->driver->irq_uninstall = i965_irq_uninstall;
dev->driver->irq_handler = i965_irq_handler;
dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
}
dev->driver->enable_vblank = i915_enable_vblank;
dev->driver->disable_vblank = i915_disable_vblank;
}
}
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
void intel_hpd_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_connector *connector;
unsigned long irqflags;
int i;
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
for (i = 1; i < HPD_NUM_PINS; i++) {
dev_priv->hpd_stats[i].hpd_cnt = 0;
dev_priv->hpd_stats[i].hpd_mark = HPD_ENABLED;
}
list_for_each_entry(connector, &mode_config->connector_list, head) {
struct intel_connector *intel_connector = to_intel_connector(connector);
connector->polled = intel_connector->polled;
if (!connector->polled && I915_HAS_HOTPLUG(dev) && intel_connector->encoder->hpd_pin > HPD_NONE)
connector->polled = DRM_CONNECTOR_POLL_HPD;
}
/* Interrupt setup is already guaranteed to be single-threaded, this is
* just to make the assert_spin_locked checks happy. */
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
if (dev_priv->display.hpd_irq_setup)
dev_priv->display.hpd_irq_setup(dev);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
}
drm/i915: allow package C8+ states on Haswell (disabled) This patch allows PC8+ states on Haswell. These states can only be reached when all the display outputs are disabled, and they allow some more power savings. The fact that the graphics device is allowing PC8+ doesn't mean that the machine will actually enter PC8+: all the other devices also need to allow PC8+. For now this option is disabled by default. You need i915.allow_pc8=1 if you want it. This patch adds a big comment inside i915_drv.h explaining how it works and how it tracks things. Read it. v2: (this is not really v2, many previous versions were already sent, but they had different names) - Use the new functions to enable/disable GTIMR and GEN6_PMIMR - Rename almost all variables and functions to names suggested by Chris - More WARNs on the IRQ handling code - Also disable PC8 when there's GPU work to do (thanks to Ben for the help on this), so apps can run caster - Enable PC8 on a delayed work function that is delayed for 5 seconds. This makes sure we only enable PC8+ if we're really idle - Make sure we're not in PC8+ when suspending v3: - WARN if IRQs are disabled on __wait_seqno - Replace some DRM_ERRORs with WARNs - Fix calls to restore GT and PM interrupts - Use intel_mark_busy instead of intel_ring_advance to disable PC8 v4: - Use the force_wake, Luke! v5: - Remove the "IIR is not zero" WARNs - Move the force_wake chunk to its own patch - Only restore what's missing from RC6, not everything Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-20 00:18:09 +08:00
/* Disable interrupts so we can allow Package C8+. */
void hsw_pc8_disable_interrupts(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long irqflags;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
dev_priv->pc8.regsave.deimr = I915_READ(DEIMR);
dev_priv->pc8.regsave.sdeimr = I915_READ(SDEIMR);
dev_priv->pc8.regsave.gtimr = I915_READ(GTIMR);
dev_priv->pc8.regsave.gtier = I915_READ(GTIER);
dev_priv->pc8.regsave.gen6_pmimr = I915_READ(GEN6_PMIMR);
ironlake_disable_display_irq(dev_priv, ~DE_PCH_EVENT_IVB);
ibx_disable_display_interrupt(dev_priv, ~SDE_HOTPLUG_MASK_CPT);
ilk_disable_gt_irq(dev_priv, 0xffffffff);
snb_disable_pm_irq(dev_priv, 0xffffffff);
dev_priv->pc8.irqs_disabled = true;
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
/* Restore interrupts so we can recover from Package C8+. */
void hsw_pc8_restore_interrupts(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long irqflags;
uint32_t val, expected;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
val = I915_READ(DEIMR);
expected = ~DE_PCH_EVENT_IVB;
WARN(val != expected, "DEIMR is 0x%08x, not 0x%08x\n", val, expected);
val = I915_READ(SDEIMR) & ~SDE_HOTPLUG_MASK_CPT;
expected = ~SDE_HOTPLUG_MASK_CPT;
WARN(val != expected, "SDEIMR non-HPD bits are 0x%08x, not 0x%08x\n",
val, expected);
val = I915_READ(GTIMR);
expected = 0xffffffff;
WARN(val != expected, "GTIMR is 0x%08x, not 0x%08x\n", val, expected);
val = I915_READ(GEN6_PMIMR);
expected = 0xffffffff;
WARN(val != expected, "GEN6_PMIMR is 0x%08x, not 0x%08x\n", val,
expected);
dev_priv->pc8.irqs_disabled = false;
ironlake_enable_display_irq(dev_priv, ~dev_priv->pc8.regsave.deimr);
ibx_enable_display_interrupt(dev_priv,
~dev_priv->pc8.regsave.sdeimr &
~SDE_HOTPLUG_MASK_CPT);
ilk_enable_gt_irq(dev_priv, ~dev_priv->pc8.regsave.gtimr);
snb_enable_pm_irq(dev_priv, ~dev_priv->pc8.regsave.gen6_pmimr);
I915_WRITE(GTIER, dev_priv->pc8.regsave.gtier);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}