OpenCloudOS-Kernel/drivers/gpu/drm/i915/i915_gem.c

4769 lines
122 KiB
C
Raw Normal View History

/*
* Copyright © 2008-2015 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
* Authors:
* Eric Anholt <eric@anholt.net>
*
*/
#include <drm/drmP.h>
#include <drm/drm_vma_manager.h>
#include <drm/i915_drm.h>
#include "i915_drv.h"
drm/i915: Wait on external rendering for GEM objects When transitioning to the GTT or CPU domain we wait on all rendering from i915 to complete (with the optimisation of allowing concurrent read access by both the GPU and client). We don't yet ensure all rendering from third parties (tracked by implicit fences on the dma-buf) is complete. Since implicitly tracked rendering by third parties will ignore our cache-domain tracking, we have to always wait upon rendering from third-parties when transitioning to direct access to the backing store. We still rely on clients notifying us of cache domain changes (i.e. they need to move to the GTT read or write domain after doing a CPU access before letting the third party render again). v2: This introduces a potential WARN_ON into i915_gem_object_free() as the current i915_vma_unbind() calls i915_gem_object_wait_rendering(). To hit this path we first need to render with the GPU, have a dma-buf attached with an unsignaled fence and then interrupt the wait. It does get fixed later in the series (when i915_vma_unbind() only waits on the active VMA and not all, including third-party, rendering. To offset that risk, use the __i915_vma_unbind_no_wait hack. Testcase: igt/prime_vgem/basic-fence-read Testcase: igt/prime_vgem/basic-fence-mmap Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-8-git-send-email-chris@chris-wilson.co.uk
2016-07-20 16:21:15 +08:00
#include "i915_gem_dmabuf.h"
#include "i915_vgpu.h"
#include "i915_trace.h"
#include "intel_drv.h"
#include "intel_mocs.h"
drm/i915: Wait on external rendering for GEM objects When transitioning to the GTT or CPU domain we wait on all rendering from i915 to complete (with the optimisation of allowing concurrent read access by both the GPU and client). We don't yet ensure all rendering from third parties (tracked by implicit fences on the dma-buf) is complete. Since implicitly tracked rendering by third parties will ignore our cache-domain tracking, we have to always wait upon rendering from third-parties when transitioning to direct access to the backing store. We still rely on clients notifying us of cache domain changes (i.e. they need to move to the GTT read or write domain after doing a CPU access before letting the third party render again). v2: This introduces a potential WARN_ON into i915_gem_object_free() as the current i915_vma_unbind() calls i915_gem_object_wait_rendering(). To hit this path we first need to render with the GPU, have a dma-buf attached with an unsignaled fence and then interrupt the wait. It does get fixed later in the series (when i915_vma_unbind() only waits on the active VMA and not all, including third-party, rendering. To offset that risk, use the __i915_vma_unbind_no_wait hack. Testcase: igt/prime_vgem/basic-fence-read Testcase: igt/prime_vgem/basic-fence-mmap Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-8-git-send-email-chris@chris-wilson.co.uk
2016-07-20 16:21:15 +08:00
#include <linux/reservation.h>
#include <linux/shmem_fs.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/swap.h>
#include <linux/pci.h>
i915: add dmabuf/prime buffer sharing support. This adds handle->fd and fd->handle support to i915, this is to allow for offloading of rendering in one direction and outputs in the other. v2 from Daniel Vetter: - fixup conflicts with the prepare/finish gtt prep work. - implement ppgtt binding support. Note that we have squat i-g-t testcoverage for any of the lifetime and access rules dma_buf/prime support brings along. And there are quite a few intricate situations here. Also note that the integration with the existing code is a bit hackish, especially around get_gtt_pages and put_gtt_pages. It imo would be easier with the prep code from Chris Wilson's unbound series, but that is for 3.6. Also note that I didn't bother to put the new prepare/finish gtt hooks to good use by moving the dma_buf_map/unmap_attachment calls in there (like we've originally planned for). Last but not least this patch is only compile-tested, but I've changed very little compared to Dave Airlie's version. So there's a decent chance v2 on drm-next works as well as v1 on 3.4-rc. v3: Right when I've hit sent I've noticed that I've screwed up one obj->sg_list (for dmar support) and obj->sg_table (for prime support) disdinction. We should be able to merge these 2 paths, but that's material for another patch. v4: fix the error reporting bugs pointed out by ickle. v5: fix another error, and stop non-gtt mmaps on shared objects stop pread/pwrite on imported objects, add fake kmap Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-10 21:25:09 +08:00
#include <linux/dma-buf.h>
static void i915_gem_object_flush_gtt_write_domain(struct drm_i915_gem_object *obj);
drm/i915: Simplify flush_cpu_write_domain We can push down the decision whether to force flushing into the implementation since in all places that matter obj->pin_display is accurate already. The only place where the optimization really matters is the sw_finish_ioctl, and that already checks for obj->pin_display on its own. I suspect that this was simply an artifact of how commit 2c22569bba8af6c2976d5f9479fe54a53a39966b Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Aug 9 12:26:45 2013 +0100 drm/i915: Update rules for writing through the LLC with the cpu evolved - only v2 added the pin_display tracking. Note that we still retain the gist of this logic from the above commit with the explicit force argument for the low-level clflush function. Ville noted in his review that there's a slight behavioural change in the set_to_gtt_domain function, which now also will flush display plane data. This opens-open the potential for userspace to start doing buggy things by omitting the sw_finish_ioctl, which is why I've rejected a functional equivalent patch from Ville a while ago: http://lists.freedesktop.org/archives/intel-gfx/2013-November/036421.html But on second consideration it's not that evil, and in any case the justification here is more clarity, not allowing crazy userspace. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-21 21:53:48 +08:00
static void i915_gem_object_flush_cpu_write_domain(struct drm_i915_gem_object *obj);
drm/i915: Update rules for reading cache lines through the LLC The LLC is a fun device. The cache is a distinct functional block within the SA that arbitrates access from both the CPU and GPU cores. As such all writes to memory land first in the LLC before further action is taken. For example, an uncached write from either the CPU or GPU will then proceed to memory and evict the cacheline from the LLC. This means that a read from the LLC always returns the correct information even if the PTE bit in the GPU differs from the PAT bit in the CPU. For the older snooping architecture on non-LLC, the fundamental principle still holds except that some coordination is required between the CPU and GPU to explicitly perform the snooping (which is handled by our request tracking). The upshot of this is that we know that we can issue a read from either LLC devices or snoopable memory and trust the contents of the cache - i.e. we can forgo a clflush before a read in these circumstances. Writing to memory from the CPU is a little more tricky as we have to consider that the scanout does not read from the CPU cache at all, but from main memory. So we have to currently treat all requests to write to uncached memory as having to be flushed to main memory for coherency with all consumers. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-08 21:41:03 +08:00
static bool cpu_cache_is_coherent(struct drm_device *dev,
enum i915_cache_level level)
{
return HAS_LLC(dev) || level != I915_CACHE_NONE;
}
static bool cpu_write_needs_clflush(struct drm_i915_gem_object *obj)
{
drm/i915: Support for pread/pwrite from/to non shmem backed objects This patch adds support for extending the pread/pwrite functionality for objects not backed by shmem. The access will be made through gtt interface. This will cover objects backed by stolen memory as well as other non-shmem backed objects. v2: Drop locks around slow_user_access, prefault the pages before access (Chris) v3: Rebased to the latest drm-intel-nightly (Ankit) v4: Moved page base & offset calculations outside the copy loop, corrected data types for size and offset variables, corrected if-else braces format (Tvrtko/kerneldocs) v5: Enabled pread/pwrite for all non-shmem backed objects including without tiling restrictions (Ankit) v6: Using pwrite_fast for non-shmem backed objects as well (Chris) v7: Updated commit message, Renamed i915_gem_gtt_read to i915_gem_gtt_copy, added pwrite slow path for non-shmem backed objects (Chris/Tvrtko) v8: Updated v7 commit message, mutex unlock around pwrite slow path for non-shmem backed objects (Tvrtko) v9: Corrected check during pread_ioctl, to avoid shmem_pread being called for non-shmem backed objects (Tvrtko) v10: Moved the write_domain check to needs_clflush and tiling mode check to pwrite_fast (Chris) v11: Use pwrite_fast fallback for all objects (shmem and non-shmem backed), call fast_user_write regardless of pagefault in previous iteration v12: Use page-by-page copy for slow user access too (Chris) v13: Handled EFAULT, Avoid use of WARN_ON, put_fence only if whole obj pinned (Chris) v14: Corrected datatypes/initializations (Tvrtko) Testcase: igt/gem_stolen, igt/gem_pread, igt/gem_pwrite Signed-off-by: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465548783-19712-1-git-send-email-ankitprasad.r.sharma@intel.com
2016-06-10 16:53:03 +08:00
if (obj->base.write_domain == I915_GEM_DOMAIN_CPU)
return false;
if (!cpu_cache_is_coherent(obj->base.dev, obj->cache_level))
return true;
return obj->pin_display;
}
static int
insert_mappable_node(struct drm_i915_private *i915,
struct drm_mm_node *node, u32 size)
{
memset(node, 0, sizeof(*node));
return drm_mm_insert_node_in_range_generic(&i915->ggtt.base.mm, node,
size, 0, 0, 0,
i915->ggtt.mappable_end,
DRM_MM_SEARCH_DEFAULT,
DRM_MM_CREATE_DEFAULT);
}
static void
remove_mappable_node(struct drm_mm_node *node)
{
drm_mm_remove_node(node);
}
/* some bookkeeping */
static void i915_gem_info_add_obj(struct drm_i915_private *dev_priv,
size_t size)
{
spin_lock(&dev_priv->mm.object_stat_lock);
dev_priv->mm.object_count++;
dev_priv->mm.object_memory += size;
spin_unlock(&dev_priv->mm.object_stat_lock);
}
static void i915_gem_info_remove_obj(struct drm_i915_private *dev_priv,
size_t size)
{
spin_lock(&dev_priv->mm.object_stat_lock);
dev_priv->mm.object_count--;
dev_priv->mm.object_memory -= size;
spin_unlock(&dev_priv->mm.object_stat_lock);
}
static int
i915_gem_wait_for_error(struct i915_gpu_error *error)
{
int ret;
if (!i915_reset_in_progress(error))
return 0;
/*
* Only wait 10 seconds for the gpu reset to complete to avoid hanging
* userspace. If it takes that long something really bad is going on and
* we should simply try to bail out and fail as gracefully as possible.
*/
drm/i915: clear up wedged transitions We have two important transitions of the wedged state in the current code: - 0 -> 1: This means a hang has been detected, and signals to everyone that they please get of any locks, so that the reset work item can do its job. - 1 -> 0: The reset handler has completed. Now the last transition mixes up two states: "Reset completed and successful" and "Reset failed". To distinguish these two we do some tricks with the reset completion, but I simply could not convince myself that this doesn't race under odd circumstances. Hence split this up, and add a new terminal state indicating that the hw is gone for good. Also add explicit #defines for both states, update comments. v2: Split out the reset handling bugfix for the throttle ioctl. v3: s/tmp/wedged/ sugested by Chris Wilson. Also fixup up a rebase error which prevented this patch from actually compiling. v4: To unify the wedged state with the reset counter, keep the reset-in-progress state just as a flag. The terminally-wedged state is now denoted with a big number. v5: Add a comment to the reset_counter special values explaining that WEDGED & RESET_IN_PROGRESS needs to be true for the code to be correct. v6: Fixup logic errors introduced with the wedged+reset_counter unification. Since WEDGED implies reset-in-progress (in a way we're terminally stuck in the dead-but-reset-not-completed state), we need ensure that we check for this everywhere. The specific bug was in wait_for_error, which would simply have timed out. v7: Extract an inline i915_reset_in_progress helper to make the code more readable. Also annote the reset-in-progress case with an unlikely, to help the compiler optimize the fastpath. Do the same for the terminally wedged case with i915_terminally_wedged. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-16 00:17:22 +08:00
ret = wait_event_interruptible_timeout(error->reset_queue,
!i915_reset_in_progress(error),
drm/i915: clear up wedged transitions We have two important transitions of the wedged state in the current code: - 0 -> 1: This means a hang has been detected, and signals to everyone that they please get of any locks, so that the reset work item can do its job. - 1 -> 0: The reset handler has completed. Now the last transition mixes up two states: "Reset completed and successful" and "Reset failed". To distinguish these two we do some tricks with the reset completion, but I simply could not convince myself that this doesn't race under odd circumstances. Hence split this up, and add a new terminal state indicating that the hw is gone for good. Also add explicit #defines for both states, update comments. v2: Split out the reset handling bugfix for the throttle ioctl. v3: s/tmp/wedged/ sugested by Chris Wilson. Also fixup up a rebase error which prevented this patch from actually compiling. v4: To unify the wedged state with the reset counter, keep the reset-in-progress state just as a flag. The terminally-wedged state is now denoted with a big number. v5: Add a comment to the reset_counter special values explaining that WEDGED & RESET_IN_PROGRESS needs to be true for the code to be correct. v6: Fixup logic errors introduced with the wedged+reset_counter unification. Since WEDGED implies reset-in-progress (in a way we're terminally stuck in the dead-but-reset-not-completed state), we need ensure that we check for this everywhere. The specific bug was in wait_for_error, which would simply have timed out. v7: Extract an inline i915_reset_in_progress helper to make the code more readable. Also annote the reset-in-progress case with an unlikely, to help the compiler optimize the fastpath. Do the same for the terminally wedged case with i915_terminally_wedged. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-16 00:17:22 +08:00
10*HZ);
if (ret == 0) {
DRM_ERROR("Timed out waiting for the gpu reset to complete\n");
return -EIO;
} else if (ret < 0) {
return ret;
} else {
return 0;
}
}
int i915_mutex_lock_interruptible(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
int ret;
ret = i915_gem_wait_for_error(&dev_priv->gpu_error);
if (ret)
return ret;
ret = mutex_lock_interruptible(&dev->struct_mutex);
if (ret)
return ret;
return 0;
}
int
i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct i915_ggtt *ggtt = &dev_priv->ggtt;
struct drm_i915_gem_get_aperture *args = data;
struct i915_vma *vma;
size_t pinned;
pinned = 0;
mutex_lock(&dev->struct_mutex);
list_for_each_entry(vma, &ggtt->base.active_list, vm_link)
if (vma->pin_count)
pinned += vma->node.size;
list_for_each_entry(vma, &ggtt->base.inactive_list, vm_link)
if (vma->pin_count)
pinned += vma->node.size;
mutex_unlock(&dev->struct_mutex);
args->aper_size = ggtt->base.total;
args->aper_available_size = args->aper_size - pinned;
return 0;
}
static int
i915_gem_object_get_pages_phys(struct drm_i915_gem_object *obj)
{
struct address_space *mapping = file_inode(obj->base.filp)->i_mapping;
char *vaddr = obj->phys_handle->vaddr;
struct sg_table *st;
struct scatterlist *sg;
int i;
if (WARN_ON(i915_gem_object_needs_bit17_swizzle(obj)))
return -EINVAL;
for (i = 0; i < obj->base.size / PAGE_SIZE; i++) {
struct page *page;
char *src;
page = shmem_read_mapping_page(mapping, i);
if (IS_ERR(page))
return PTR_ERR(page);
src = kmap_atomic(page);
memcpy(vaddr, src, PAGE_SIZE);
drm_clflush_virt_range(vaddr, PAGE_SIZE);
kunmap_atomic(src);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
vaddr += PAGE_SIZE;
}
i915_gem_chipset_flush(to_i915(obj->base.dev));
st = kmalloc(sizeof(*st), GFP_KERNEL);
if (st == NULL)
return -ENOMEM;
if (sg_alloc_table(st, 1, GFP_KERNEL)) {
kfree(st);
return -ENOMEM;
}
sg = st->sgl;
sg->offset = 0;
sg->length = obj->base.size;
sg_dma_address(sg) = obj->phys_handle->busaddr;
sg_dma_len(sg) = obj->base.size;
obj->pages = st;
return 0;
}
static void
i915_gem_object_put_pages_phys(struct drm_i915_gem_object *obj)
{
int ret;
BUG_ON(obj->madv == __I915_MADV_PURGED);
ret = i915_gem_object_set_to_cpu_domain(obj, true);
drm/i915: Prevent leaking of -EIO from i915_wait_request() Reporting -EIO from i915_wait_request() has proven very troublematic over the years, with numerous hard-to-reproduce bugs cropping up in the corner case of where a reset occurs and the code wasn't expecting such an error. If the we reset the GPU or have detected a hang and wish to reset the GPU, the request is forcibly complete and the wait broken. Currently, we report either -EAGAIN or -EIO in order for the caller to retreat and restart the wait (if appropriate) after dropping and then reacquiring the struct_mutex (essential to allow the GPU reset to proceed). However, if we take the view that the request is complete (no further work will be done on it by the GPU because it is dead and soon to be reset), then we can proceed with the task at hand and then drop the struct_mutex allowing the reset to occur. This transfers the burden of checking whether it is safe to proceed to the caller, which in all but one instance it is safe - completely eliminating the source of all spurious -EIO. Of note, we only have two API entry points where we expect that userspace can observe an EIO. First is when submitting an execbuf, if the GPU is terminally wedged, then the operation cannot succeed and an -EIO is reported. Secondly, existing userspace uses the throttle ioctl to detect an already wedged GPU before starting using HW acceleration (or to confirm that the GPU is wedged after an error condition). So if the GPU is wedged when the user calls throttle, also report -EIO. v2: Split more carefully the change to i915_wait_request() and assorted ABI from the reset handling. v3: Add a couple of WARN_ON(EIO) to the interruptible modesetting code so that we don't start to leak EIO there in future (and break our hang resistant modesetting). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1460565315-7748-9-git-send-email-chris@chris-wilson.co.uk Link: http://patchwork.freedesktop.org/patch/msgid/1460565315-7748-1-git-send-email-chris@chris-wilson.co.uk
2016-04-14 00:35:08 +08:00
if (WARN_ON(ret)) {
/* In the event of a disaster, abandon all caches and
* hope for the best.
*/
obj->base.read_domains = obj->base.write_domain = I915_GEM_DOMAIN_CPU;
}
if (obj->madv == I915_MADV_DONTNEED)
obj->dirty = 0;
if (obj->dirty) {
struct address_space *mapping = file_inode(obj->base.filp)->i_mapping;
char *vaddr = obj->phys_handle->vaddr;
int i;
for (i = 0; i < obj->base.size / PAGE_SIZE; i++) {
struct page *page;
char *dst;
page = shmem_read_mapping_page(mapping, i);
if (IS_ERR(page))
continue;
dst = kmap_atomic(page);
drm_clflush_virt_range(vaddr, PAGE_SIZE);
memcpy(dst, vaddr, PAGE_SIZE);
kunmap_atomic(dst);
set_page_dirty(page);
if (obj->madv == I915_MADV_WILLNEED)
mark_page_accessed(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
vaddr += PAGE_SIZE;
}
obj->dirty = 0;
}
sg_free_table(obj->pages);
kfree(obj->pages);
}
static void
i915_gem_object_release_phys(struct drm_i915_gem_object *obj)
{
drm_pci_free(obj->base.dev, obj->phys_handle);
}
static const struct drm_i915_gem_object_ops i915_gem_phys_ops = {
.get_pages = i915_gem_object_get_pages_phys,
.put_pages = i915_gem_object_put_pages_phys,
.release = i915_gem_object_release_phys,
};
int
i915_gem_object_unbind(struct drm_i915_gem_object *obj)
{
struct i915_vma *vma;
LIST_HEAD(still_in_list);
int ret;
/* The vma will only be freed if it is marked as closed, and if we wait
* upon rendering to the vma, we may unbind anything in the list.
*/
while ((vma = list_first_entry_or_null(&obj->vma_list,
struct i915_vma,
obj_link))) {
list_move_tail(&vma->obj_link, &still_in_list);
ret = i915_vma_unbind(vma);
if (ret)
break;
}
list_splice(&still_in_list, &obj->vma_list);
return ret;
}
int
i915_gem_object_attach_phys(struct drm_i915_gem_object *obj,
int align)
{
drm_dma_handle_t *phys;
int ret;
if (obj->phys_handle) {
if ((unsigned long)obj->phys_handle->vaddr & (align -1))
return -EBUSY;
return 0;
}
if (obj->madv != I915_MADV_WILLNEED)
return -EFAULT;
if (obj->base.filp == NULL)
return -EINVAL;
ret = i915_gem_object_unbind(obj);
if (ret)
return ret;
ret = i915_gem_object_put_pages(obj);
if (ret)
return ret;
/* create a new object */
phys = drm_pci_alloc(obj->base.dev, obj->base.size, align);
if (!phys)
return -ENOMEM;
obj->phys_handle = phys;
obj->ops = &i915_gem_phys_ops;
return i915_gem_object_get_pages(obj);
}
static int
i915_gem_phys_pwrite(struct drm_i915_gem_object *obj,
struct drm_i915_gem_pwrite *args,
struct drm_file *file_priv)
{
struct drm_device *dev = obj->base.dev;
void *vaddr = obj->phys_handle->vaddr + args->offset;
char __user *user_data = u64_to_user_ptr(args->data_ptr);
int ret = 0;
/* We manually control the domain here and pretend that it
* remains coherent i.e. in the GTT domain, like shmem_pwrite.
*/
ret = i915_gem_object_wait_rendering(obj, false);
if (ret)
return ret;
intel_fb_obj_invalidate(obj, ORIGIN_CPU);
if (__copy_from_user_inatomic_nocache(vaddr, user_data, args->size)) {
unsigned long unwritten;
/* The physical object once assigned is fixed for the lifetime
* of the obj, so we can safely drop the lock and continue
* to access vaddr.
*/
mutex_unlock(&dev->struct_mutex);
unwritten = copy_from_user(vaddr, user_data, args->size);
mutex_lock(&dev->struct_mutex);
if (unwritten) {
ret = -EFAULT;
goto out;
}
}
drm_clflush_virt_range(vaddr, args->size);
i915_gem_chipset_flush(to_i915(dev));
out:
intel_fb_obj_flush(obj, false, ORIGIN_CPU);
return ret;
}
void *i915_gem_object_alloc(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
return kmem_cache_zalloc(dev_priv->objects, GFP_KERNEL);
}
void i915_gem_object_free(struct drm_i915_gem_object *obj)
{
struct drm_i915_private *dev_priv = to_i915(obj->base.dev);
kmem_cache_free(dev_priv->objects, obj);
}
static int
i915_gem_create(struct drm_file *file,
struct drm_device *dev,
uint64_t size,
uint32_t *handle_p)
{
struct drm_i915_gem_object *obj;
int ret;
u32 handle;
size = roundup(size, PAGE_SIZE);
if (size == 0)
return -EINVAL;
/* Allocate the new object */
obj = i915_gem_object_create(dev, size);
if (IS_ERR(obj))
return PTR_ERR(obj);
ret = drm_gem_handle_create(file, &obj->base, &handle);
/* drop reference from allocate - handle holds it now */
i915_gem_object_put_unlocked(obj);
if (ret)
return ret;
*handle_p = handle;
return 0;
}
int
i915_gem_dumb_create(struct drm_file *file,
struct drm_device *dev,
struct drm_mode_create_dumb *args)
{
/* have to work out size/pitch and return them */
args->pitch = ALIGN(args->width * DIV_ROUND_UP(args->bpp, 8), 64);
args->size = args->pitch * args->height;
return i915_gem_create(file, dev,
args->size, &args->handle);
}
/**
* Creates a new mm object and returns a handle to it.
* @dev: drm device pointer
* @data: ioctl data blob
* @file: drm file pointer
*/
int
i915_gem_create_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_create *args = data;
return i915_gem_create(file, dev,
args->size, &args->handle);
}
static inline int
__copy_to_user_swizzled(char __user *cpu_vaddr,
const char *gpu_vaddr, int gpu_offset,
int length)
{
int ret, cpu_offset = 0;
while (length > 0) {
int cacheline_end = ALIGN(gpu_offset + 1, 64);
int this_length = min(cacheline_end - gpu_offset, length);
int swizzled_gpu_offset = gpu_offset ^ 64;
ret = __copy_to_user(cpu_vaddr + cpu_offset,
gpu_vaddr + swizzled_gpu_offset,
this_length);
if (ret)
return ret + length;
cpu_offset += this_length;
gpu_offset += this_length;
length -= this_length;
}
return 0;
}
drm/i915: rewrite shmem_pwrite_slow to use copy_from_user ... instead of get_user_pages, because that fails on non page-backed user addresses like e.g. a gtt mapping of a bo. To get there essentially copy the vfs read path into pagecache. We can't call that right away because we have to take care of bit17 swizzling. To not deadlock with our own pagefault handler we need to completely drop struct_mutex, reducing the atomicty-guarantees of our userspace abi. Implications for racing with other gem ioctl: - execbuf, pwrite, pread: Due to -EFAULT fallback to slow paths there's already the risk of the pwrite call not being atomic, no degration. - read/write access to mmaps: already fully racy, no degration. - set_tiling: Calling set_tiling while reading/writing is already pretty much undefined, now it just got a bit worse. set_tiling is only called by libdrm on unused/new bos, so no problem. - set_domain: When changing to the gtt domain while copying (without any read/write access, e.g. for synchronization), we might leave unflushed data in the cpu caches. The clflush_object at the end of pwrite_slow takes care of this problem. - truncating of purgeable objects: the shmem_read_mapping_page call could reinstate backing storage for truncated objects. The check at the end of pwrite_slow takes care of this. v2: - add missing intel_gtt_chipset_flush - add __ to copy_from_user_swizzled as suggest by Chris Wilson. v3: Fixup bit17 swizzling, it swizzled the wrong pages. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-12-14 20:57:31 +08:00
static inline int
__copy_from_user_swizzled(char *gpu_vaddr, int gpu_offset,
const char __user *cpu_vaddr,
drm/i915: rewrite shmem_pwrite_slow to use copy_from_user ... instead of get_user_pages, because that fails on non page-backed user addresses like e.g. a gtt mapping of a bo. To get there essentially copy the vfs read path into pagecache. We can't call that right away because we have to take care of bit17 swizzling. To not deadlock with our own pagefault handler we need to completely drop struct_mutex, reducing the atomicty-guarantees of our userspace abi. Implications for racing with other gem ioctl: - execbuf, pwrite, pread: Due to -EFAULT fallback to slow paths there's already the risk of the pwrite call not being atomic, no degration. - read/write access to mmaps: already fully racy, no degration. - set_tiling: Calling set_tiling while reading/writing is already pretty much undefined, now it just got a bit worse. set_tiling is only called by libdrm on unused/new bos, so no problem. - set_domain: When changing to the gtt domain while copying (without any read/write access, e.g. for synchronization), we might leave unflushed data in the cpu caches. The clflush_object at the end of pwrite_slow takes care of this problem. - truncating of purgeable objects: the shmem_read_mapping_page call could reinstate backing storage for truncated objects. The check at the end of pwrite_slow takes care of this. v2: - add missing intel_gtt_chipset_flush - add __ to copy_from_user_swizzled as suggest by Chris Wilson. v3: Fixup bit17 swizzling, it swizzled the wrong pages. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-12-14 20:57:31 +08:00
int length)
{
int ret, cpu_offset = 0;
while (length > 0) {
int cacheline_end = ALIGN(gpu_offset + 1, 64);
int this_length = min(cacheline_end - gpu_offset, length);
int swizzled_gpu_offset = gpu_offset ^ 64;
ret = __copy_from_user(gpu_vaddr + swizzled_gpu_offset,
cpu_vaddr + cpu_offset,
this_length);
if (ret)
return ret + length;
cpu_offset += this_length;
gpu_offset += this_length;
length -= this_length;
}
return 0;
}
/*
* Pins the specified object's pages and synchronizes the object with
* GPU accesses. Sets needs_clflush to non-zero if the caller should
* flush the object from the CPU cache.
*/
int i915_gem_obj_prepare_shmem_read(struct drm_i915_gem_object *obj,
int *needs_clflush)
{
int ret;
*needs_clflush = 0;
if (WARN_ON(!i915_gem_object_has_struct_page(obj)))
return -EINVAL;
drm/i915: Wait on external rendering for GEM objects When transitioning to the GTT or CPU domain we wait on all rendering from i915 to complete (with the optimisation of allowing concurrent read access by both the GPU and client). We don't yet ensure all rendering from third parties (tracked by implicit fences on the dma-buf) is complete. Since implicitly tracked rendering by third parties will ignore our cache-domain tracking, we have to always wait upon rendering from third-parties when transitioning to direct access to the backing store. We still rely on clients notifying us of cache domain changes (i.e. they need to move to the GTT read or write domain after doing a CPU access before letting the third party render again). v2: This introduces a potential WARN_ON into i915_gem_object_free() as the current i915_vma_unbind() calls i915_gem_object_wait_rendering(). To hit this path we first need to render with the GPU, have a dma-buf attached with an unsignaled fence and then interrupt the wait. It does get fixed later in the series (when i915_vma_unbind() only waits on the active VMA and not all, including third-party, rendering. To offset that risk, use the __i915_vma_unbind_no_wait hack. Testcase: igt/prime_vgem/basic-fence-read Testcase: igt/prime_vgem/basic-fence-mmap Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-8-git-send-email-chris@chris-wilson.co.uk
2016-07-20 16:21:15 +08:00
ret = i915_gem_object_wait_rendering(obj, true);
if (ret)
return ret;
if (!(obj->base.read_domains & I915_GEM_DOMAIN_CPU)) {
/* If we're not in the cpu read domain, set ourself into the gtt
* read domain and manually flush cachelines (if required). This
* optimizes for the case when the gpu will dirty the data
* anyway again before the next pread happens. */
*needs_clflush = !cpu_cache_is_coherent(obj->base.dev,
obj->cache_level);
}
ret = i915_gem_object_get_pages(obj);
if (ret)
return ret;
i915_gem_object_pin_pages(obj);
return ret;
}
/* Per-page copy function for the shmem pread fastpath.
* Flushes invalid cachelines before reading the target if
* needs_clflush is set. */
static int
shmem_pread_fast(struct page *page, int shmem_page_offset, int page_length,
char __user *user_data,
bool page_do_bit17_swizzling, bool needs_clflush)
{
char *vaddr;
int ret;
if (unlikely(page_do_bit17_swizzling))
return -EINVAL;
vaddr = kmap_atomic(page);
if (needs_clflush)
drm_clflush_virt_range(vaddr + shmem_page_offset,
page_length);
ret = __copy_to_user_inatomic(user_data,
vaddr + shmem_page_offset,
page_length);
kunmap_atomic(vaddr);
return ret ? -EFAULT : 0;
}
static void
shmem_clflush_swizzled_range(char *addr, unsigned long length,
bool swizzled)
{
if (unlikely(swizzled)) {
unsigned long start = (unsigned long) addr;
unsigned long end = (unsigned long) addr + length;
/* For swizzling simply ensure that we always flush both
* channels. Lame, but simple and it works. Swizzled
* pwrite/pread is far from a hotpath - current userspace
* doesn't use it at all. */
start = round_down(start, 128);
end = round_up(end, 128);
drm_clflush_virt_range((void *)start, end - start);
} else {
drm_clflush_virt_range(addr, length);
}
}
/* Only difference to the fast-path function is that this can handle bit17
* and uses non-atomic copy and kmap functions. */
static int
shmem_pread_slow(struct page *page, int shmem_page_offset, int page_length,
char __user *user_data,
bool page_do_bit17_swizzling, bool needs_clflush)
{
char *vaddr;
int ret;
vaddr = kmap(page);
if (needs_clflush)
shmem_clflush_swizzled_range(vaddr + shmem_page_offset,
page_length,
page_do_bit17_swizzling);
if (page_do_bit17_swizzling)
ret = __copy_to_user_swizzled(user_data,
vaddr, shmem_page_offset,
page_length);
else
ret = __copy_to_user(user_data,
vaddr + shmem_page_offset,
page_length);
kunmap(page);
return ret ? - EFAULT : 0;
}
drm/i915: Support for pread/pwrite from/to non shmem backed objects This patch adds support for extending the pread/pwrite functionality for objects not backed by shmem. The access will be made through gtt interface. This will cover objects backed by stolen memory as well as other non-shmem backed objects. v2: Drop locks around slow_user_access, prefault the pages before access (Chris) v3: Rebased to the latest drm-intel-nightly (Ankit) v4: Moved page base & offset calculations outside the copy loop, corrected data types for size and offset variables, corrected if-else braces format (Tvrtko/kerneldocs) v5: Enabled pread/pwrite for all non-shmem backed objects including without tiling restrictions (Ankit) v6: Using pwrite_fast for non-shmem backed objects as well (Chris) v7: Updated commit message, Renamed i915_gem_gtt_read to i915_gem_gtt_copy, added pwrite slow path for non-shmem backed objects (Chris/Tvrtko) v8: Updated v7 commit message, mutex unlock around pwrite slow path for non-shmem backed objects (Tvrtko) v9: Corrected check during pread_ioctl, to avoid shmem_pread being called for non-shmem backed objects (Tvrtko) v10: Moved the write_domain check to needs_clflush and tiling mode check to pwrite_fast (Chris) v11: Use pwrite_fast fallback for all objects (shmem and non-shmem backed), call fast_user_write regardless of pagefault in previous iteration v12: Use page-by-page copy for slow user access too (Chris) v13: Handled EFAULT, Avoid use of WARN_ON, put_fence only if whole obj pinned (Chris) v14: Corrected datatypes/initializations (Tvrtko) Testcase: igt/gem_stolen, igt/gem_pread, igt/gem_pwrite Signed-off-by: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465548783-19712-1-git-send-email-ankitprasad.r.sharma@intel.com
2016-06-10 16:53:03 +08:00
static inline unsigned long
slow_user_access(struct io_mapping *mapping,
uint64_t page_base, int page_offset,
char __user *user_data,
unsigned long length, bool pwrite)
{
void __iomem *ioaddr;
void *vaddr;
uint64_t unwritten;
ioaddr = io_mapping_map_wc(mapping, page_base, PAGE_SIZE);
/* We can use the cpu mem copy function because this is X86. */
vaddr = (void __force *)ioaddr + page_offset;
if (pwrite)
unwritten = __copy_from_user(vaddr, user_data, length);
else
unwritten = __copy_to_user(user_data, vaddr, length);
io_mapping_unmap(ioaddr);
return unwritten;
}
static int
i915_gem_gtt_pread(struct drm_device *dev,
struct drm_i915_gem_object *obj, uint64_t size,
uint64_t data_offset, uint64_t data_ptr)
{
struct drm_i915_private *dev_priv = to_i915(dev);
drm/i915: Support for pread/pwrite from/to non shmem backed objects This patch adds support for extending the pread/pwrite functionality for objects not backed by shmem. The access will be made through gtt interface. This will cover objects backed by stolen memory as well as other non-shmem backed objects. v2: Drop locks around slow_user_access, prefault the pages before access (Chris) v3: Rebased to the latest drm-intel-nightly (Ankit) v4: Moved page base & offset calculations outside the copy loop, corrected data types for size and offset variables, corrected if-else braces format (Tvrtko/kerneldocs) v5: Enabled pread/pwrite for all non-shmem backed objects including without tiling restrictions (Ankit) v6: Using pwrite_fast for non-shmem backed objects as well (Chris) v7: Updated commit message, Renamed i915_gem_gtt_read to i915_gem_gtt_copy, added pwrite slow path for non-shmem backed objects (Chris/Tvrtko) v8: Updated v7 commit message, mutex unlock around pwrite slow path for non-shmem backed objects (Tvrtko) v9: Corrected check during pread_ioctl, to avoid shmem_pread being called for non-shmem backed objects (Tvrtko) v10: Moved the write_domain check to needs_clflush and tiling mode check to pwrite_fast (Chris) v11: Use pwrite_fast fallback for all objects (shmem and non-shmem backed), call fast_user_write regardless of pagefault in previous iteration v12: Use page-by-page copy for slow user access too (Chris) v13: Handled EFAULT, Avoid use of WARN_ON, put_fence only if whole obj pinned (Chris) v14: Corrected datatypes/initializations (Tvrtko) Testcase: igt/gem_stolen, igt/gem_pread, igt/gem_pwrite Signed-off-by: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465548783-19712-1-git-send-email-ankitprasad.r.sharma@intel.com
2016-06-10 16:53:03 +08:00
struct i915_ggtt *ggtt = &dev_priv->ggtt;
struct drm_mm_node node;
char __user *user_data;
uint64_t remain;
uint64_t offset;
int ret;
ret = i915_gem_obj_ggtt_pin(obj, 0, PIN_MAPPABLE);
if (ret) {
ret = insert_mappable_node(dev_priv, &node, PAGE_SIZE);
if (ret)
goto out;
ret = i915_gem_object_get_pages(obj);
if (ret) {
remove_mappable_node(&node);
goto out;
}
i915_gem_object_pin_pages(obj);
} else {
node.start = i915_gem_obj_ggtt_offset(obj);
node.allocated = false;
ret = i915_gem_object_put_fence(obj);
if (ret)
goto out_unpin;
}
ret = i915_gem_object_set_to_gtt_domain(obj, false);
if (ret)
goto out_unpin;
user_data = u64_to_user_ptr(data_ptr);
remain = size;
offset = data_offset;
mutex_unlock(&dev->struct_mutex);
if (likely(!i915.prefault_disable)) {
ret = fault_in_multipages_writeable(user_data, remain);
if (ret) {
mutex_lock(&dev->struct_mutex);
goto out_unpin;
}
}
while (remain > 0) {
/* Operation in this page
*
* page_base = page offset within aperture
* page_offset = offset within page
* page_length = bytes to copy for this page
*/
u32 page_base = node.start;
unsigned page_offset = offset_in_page(offset);
unsigned page_length = PAGE_SIZE - page_offset;
page_length = remain < page_length ? remain : page_length;
if (node.allocated) {
wmb();
ggtt->base.insert_page(&ggtt->base,
i915_gem_object_get_dma_address(obj, offset >> PAGE_SHIFT),
node.start,
I915_CACHE_NONE, 0);
wmb();
} else {
page_base += offset & PAGE_MASK;
}
/* This is a slow read/write as it tries to read from
* and write to user memory which may result into page
* faults, and so we cannot perform this under struct_mutex.
*/
if (slow_user_access(ggtt->mappable, page_base,
page_offset, user_data,
page_length, false)) {
ret = -EFAULT;
break;
}
remain -= page_length;
user_data += page_length;
offset += page_length;
}
mutex_lock(&dev->struct_mutex);
if (ret == 0 && (obj->base.read_domains & I915_GEM_DOMAIN_GTT) == 0) {
/* The user has modified the object whilst we tried
* reading from it, and we now have no idea what domain
* the pages should be in. As we have just been touching
* them directly, flush everything back to the GTT
* domain.
*/
ret = i915_gem_object_set_to_gtt_domain(obj, false);
}
out_unpin:
if (node.allocated) {
wmb();
ggtt->base.clear_range(&ggtt->base,
node.start, node.size,
true);
i915_gem_object_unpin_pages(obj);
remove_mappable_node(&node);
} else {
i915_gem_object_ggtt_unpin(obj);
}
out:
return ret;
}
static int
i915_gem_shmem_pread(struct drm_device *dev,
struct drm_i915_gem_object *obj,
struct drm_i915_gem_pread *args,
struct drm_file *file)
{
char __user *user_data;
ssize_t remain;
loff_t offset;
int shmem_page_offset, page_length, ret = 0;
int obj_do_bit17_swizzling, page_do_bit17_swizzling;
int prefaulted = 0;
int needs_clflush = 0;
struct sg_page_iter sg_iter;
if (!i915_gem_object_has_struct_page(obj))
drm/i915: Support for pread/pwrite from/to non shmem backed objects This patch adds support for extending the pread/pwrite functionality for objects not backed by shmem. The access will be made through gtt interface. This will cover objects backed by stolen memory as well as other non-shmem backed objects. v2: Drop locks around slow_user_access, prefault the pages before access (Chris) v3: Rebased to the latest drm-intel-nightly (Ankit) v4: Moved page base & offset calculations outside the copy loop, corrected data types for size and offset variables, corrected if-else braces format (Tvrtko/kerneldocs) v5: Enabled pread/pwrite for all non-shmem backed objects including without tiling restrictions (Ankit) v6: Using pwrite_fast for non-shmem backed objects as well (Chris) v7: Updated commit message, Renamed i915_gem_gtt_read to i915_gem_gtt_copy, added pwrite slow path for non-shmem backed objects (Chris/Tvrtko) v8: Updated v7 commit message, mutex unlock around pwrite slow path for non-shmem backed objects (Tvrtko) v9: Corrected check during pread_ioctl, to avoid shmem_pread being called for non-shmem backed objects (Tvrtko) v10: Moved the write_domain check to needs_clflush and tiling mode check to pwrite_fast (Chris) v11: Use pwrite_fast fallback for all objects (shmem and non-shmem backed), call fast_user_write regardless of pagefault in previous iteration v12: Use page-by-page copy for slow user access too (Chris) v13: Handled EFAULT, Avoid use of WARN_ON, put_fence only if whole obj pinned (Chris) v14: Corrected datatypes/initializations (Tvrtko) Testcase: igt/gem_stolen, igt/gem_pread, igt/gem_pwrite Signed-off-by: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465548783-19712-1-git-send-email-ankitprasad.r.sharma@intel.com
2016-06-10 16:53:03 +08:00
return -ENODEV;
user_data = u64_to_user_ptr(args->data_ptr);
remain = args->size;
obj_do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj);
ret = i915_gem_obj_prepare_shmem_read(obj, &needs_clflush);
if (ret)
return ret;
offset = args->offset;
for_each_sg_page(obj->pages->sgl, &sg_iter, obj->pages->nents,
offset >> PAGE_SHIFT) {
struct page *page = sg_page_iter_page(&sg_iter);
if (remain <= 0)
break;
/* Operation in this page
*
* shmem_page_offset = offset within page in shmem file
* page_length = bytes to copy for this page
*/
shmem_page_offset = offset_in_page(offset);
page_length = remain;
if ((shmem_page_offset + page_length) > PAGE_SIZE)
page_length = PAGE_SIZE - shmem_page_offset;
page_do_bit17_swizzling = obj_do_bit17_swizzling &&
(page_to_phys(page) & (1 << 17)) != 0;
ret = shmem_pread_fast(page, shmem_page_offset, page_length,
user_data, page_do_bit17_swizzling,
needs_clflush);
if (ret == 0)
goto next_page;
mutex_unlock(&dev->struct_mutex);
if (likely(!i915.prefault_disable) && !prefaulted) {
ret = fault_in_multipages_writeable(user_data, remain);
/* Userspace is tricking us, but we've already clobbered
* its pages with the prefault and promised to write the
* data up to the first fault. Hence ignore any errors
* and just continue. */
(void)ret;
prefaulted = 1;
}
ret = shmem_pread_slow(page, shmem_page_offset, page_length,
user_data, page_do_bit17_swizzling,
needs_clflush);
mutex_lock(&dev->struct_mutex);
if (ret)
goto out;
next_page:
remain -= page_length;
user_data += page_length;
offset += page_length;
}
out:
i915_gem_object_unpin_pages(obj);
return ret;
}
/**
* Reads data from the object referenced by handle.
* @dev: drm device pointer
* @data: ioctl data blob
* @file: drm file pointer
*
* On error, the contents of *data are undefined.
*/
int
i915_gem_pread_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_pread *args = data;
struct drm_i915_gem_object *obj;
int ret = 0;
drm/i915: Do not hold mutex when faulting in user addresses Linus Torvalds found that it was rather trivial to trigger a system freeze: In fact, with lockdep, I don't even need to do the sysrq-d thing: it shows the bug as it happens. It's the X server taking the same lock recursively. Here's the problem: ============================================= [ INFO: possible recursive locking detected ] 2.6.37-rc2-00012-gbdbd01a #7 --------------------------------------------- Xorg/2816 is trying to acquire lock: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c626c>] i915_gem_fault+0x50/0x17e but task is already holding lock: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c403b>] i915_mutex_lock_interruptible+0x28/0x4a other info that might help us debug this: 2 locks held by Xorg/2816: #0: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c403b>] i915_mutex_lock_interruptible+0x28/0x4a #1: (&mm->mmap_sem){++++++}, at: [<ffffffff81022d4f>] page_fault+0x156/0x37b This recursion was introduced by rearranging the locking to avoid the double locking on the fast path (4f27b5d and fbd5a26d) and the introduction of the prefault to encourage the fast paths (b5e4f2b). In order to undo the problem, we rearrange the code to perform the access validation upfront, attempt to prefault and then fight for control of the mutex. the best case scenario where the mutex is uncontended the prefaulting is not wasted. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-17 17:10:42 +08:00
if (args->size == 0)
return 0;
if (!access_ok(VERIFY_WRITE,
u64_to_user_ptr(args->data_ptr),
drm/i915: Do not hold mutex when faulting in user addresses Linus Torvalds found that it was rather trivial to trigger a system freeze: In fact, with lockdep, I don't even need to do the sysrq-d thing: it shows the bug as it happens. It's the X server taking the same lock recursively. Here's the problem: ============================================= [ INFO: possible recursive locking detected ] 2.6.37-rc2-00012-gbdbd01a #7 --------------------------------------------- Xorg/2816 is trying to acquire lock: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c626c>] i915_gem_fault+0x50/0x17e but task is already holding lock: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c403b>] i915_mutex_lock_interruptible+0x28/0x4a other info that might help us debug this: 2 locks held by Xorg/2816: #0: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c403b>] i915_mutex_lock_interruptible+0x28/0x4a #1: (&mm->mmap_sem){++++++}, at: [<ffffffff81022d4f>] page_fault+0x156/0x37b This recursion was introduced by rearranging the locking to avoid the double locking on the fast path (4f27b5d and fbd5a26d) and the introduction of the prefault to encourage the fast paths (b5e4f2b). In order to undo the problem, we rearrange the code to perform the access validation upfront, attempt to prefault and then fight for control of the mutex. the best case scenario where the mutex is uncontended the prefaulting is not wasted. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-17 17:10:42 +08:00
args->size))
return -EFAULT;
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
obj = i915_gem_object_lookup(file, args->handle);
if (!obj) {
ret = -ENOENT;
goto unlock;
}
/* Bounds check source. */
if (args->offset > obj->base.size ||
args->size > obj->base.size - args->offset) {
ret = -EINVAL;
goto out;
}
trace_i915_gem_object_pread(obj, args->offset, args->size);
ret = i915_gem_shmem_pread(dev, obj, args, file);
drm/i915: Support for pread/pwrite from/to non shmem backed objects This patch adds support for extending the pread/pwrite functionality for objects not backed by shmem. The access will be made through gtt interface. This will cover objects backed by stolen memory as well as other non-shmem backed objects. v2: Drop locks around slow_user_access, prefault the pages before access (Chris) v3: Rebased to the latest drm-intel-nightly (Ankit) v4: Moved page base & offset calculations outside the copy loop, corrected data types for size and offset variables, corrected if-else braces format (Tvrtko/kerneldocs) v5: Enabled pread/pwrite for all non-shmem backed objects including without tiling restrictions (Ankit) v6: Using pwrite_fast for non-shmem backed objects as well (Chris) v7: Updated commit message, Renamed i915_gem_gtt_read to i915_gem_gtt_copy, added pwrite slow path for non-shmem backed objects (Chris/Tvrtko) v8: Updated v7 commit message, mutex unlock around pwrite slow path for non-shmem backed objects (Tvrtko) v9: Corrected check during pread_ioctl, to avoid shmem_pread being called for non-shmem backed objects (Tvrtko) v10: Moved the write_domain check to needs_clflush and tiling mode check to pwrite_fast (Chris) v11: Use pwrite_fast fallback for all objects (shmem and non-shmem backed), call fast_user_write regardless of pagefault in previous iteration v12: Use page-by-page copy for slow user access too (Chris) v13: Handled EFAULT, Avoid use of WARN_ON, put_fence only if whole obj pinned (Chris) v14: Corrected datatypes/initializations (Tvrtko) Testcase: igt/gem_stolen, igt/gem_pread, igt/gem_pwrite Signed-off-by: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465548783-19712-1-git-send-email-ankitprasad.r.sharma@intel.com
2016-06-10 16:53:03 +08:00
/* pread for non shmem backed objects */
if (ret == -EFAULT || ret == -ENODEV)
ret = i915_gem_gtt_pread(dev, obj, args->size,
args->offset, args->data_ptr);
out:
i915_gem_object_put(obj);
unlock:
mutex_unlock(&dev->struct_mutex);
return ret;
}
/* This is the fast write path which cannot handle
* page faults in the source data
*/
static inline int
fast_user_write(struct io_mapping *mapping,
loff_t page_base, int page_offset,
char __user *user_data,
int length)
{
void __iomem *vaddr_atomic;
void *vaddr;
unsigned long unwritten;
mm: stack based kmap_atomic() Keep the current interface but ignore the KM_type and use a stack based approach. The advantage is that we get rid of crappy code like: #define __KM_PTE \ (in_nmi() ? KM_NMI_PTE : \ in_irq() ? KM_IRQ_PTE : \ KM_PTE0) and in general can stop worrying about what context we're in and what kmap slots might be appropriate for that. The downside is that FRV kmap_atomic() gets more expensive. For now we use a CPP trick suggested by Andrew: #define kmap_atomic(page, args...) __kmap_atomic(page) to avoid having to touch all kmap_atomic() users in a single patch. [ not compiled on: - mn10300: the arch doesn't actually build with highmem to begin with ] [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix up drivers/gpu/drm/i915/intel_overlay.c] Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@linux.ie> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 05:21:51 +08:00
vaddr_atomic = io_mapping_map_atomic_wc(mapping, page_base);
/* We can use the cpu mem copy function because this is X86. */
vaddr = (void __force*)vaddr_atomic + page_offset;
unwritten = __copy_from_user_inatomic_nocache(vaddr,
user_data, length);
mm: stack based kmap_atomic() Keep the current interface but ignore the KM_type and use a stack based approach. The advantage is that we get rid of crappy code like: #define __KM_PTE \ (in_nmi() ? KM_NMI_PTE : \ in_irq() ? KM_IRQ_PTE : \ KM_PTE0) and in general can stop worrying about what context we're in and what kmap slots might be appropriate for that. The downside is that FRV kmap_atomic() gets more expensive. For now we use a CPP trick suggested by Andrew: #define kmap_atomic(page, args...) __kmap_atomic(page) to avoid having to touch all kmap_atomic() users in a single patch. [ not compiled on: - mn10300: the arch doesn't actually build with highmem to begin with ] [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix up drivers/gpu/drm/i915/intel_overlay.c] Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@linux.ie> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 05:21:51 +08:00
io_mapping_unmap_atomic(vaddr_atomic);
return unwritten;
}
/**
* This is the fast pwrite path, where we copy the data directly from the
* user into the GTT, uncached.
* @i915: i915 device private data
* @obj: i915 gem object
* @args: pwrite arguments structure
* @file: drm file pointer
*/
static int
i915_gem_gtt_pwrite_fast(struct drm_i915_private *i915,
struct drm_i915_gem_object *obj,
struct drm_i915_gem_pwrite *args,
struct drm_file *file)
{
struct i915_ggtt *ggtt = &i915->ggtt;
drm/i915: Support for pread/pwrite from/to non shmem backed objects This patch adds support for extending the pread/pwrite functionality for objects not backed by shmem. The access will be made through gtt interface. This will cover objects backed by stolen memory as well as other non-shmem backed objects. v2: Drop locks around slow_user_access, prefault the pages before access (Chris) v3: Rebased to the latest drm-intel-nightly (Ankit) v4: Moved page base & offset calculations outside the copy loop, corrected data types for size and offset variables, corrected if-else braces format (Tvrtko/kerneldocs) v5: Enabled pread/pwrite for all non-shmem backed objects including without tiling restrictions (Ankit) v6: Using pwrite_fast for non-shmem backed objects as well (Chris) v7: Updated commit message, Renamed i915_gem_gtt_read to i915_gem_gtt_copy, added pwrite slow path for non-shmem backed objects (Chris/Tvrtko) v8: Updated v7 commit message, mutex unlock around pwrite slow path for non-shmem backed objects (Tvrtko) v9: Corrected check during pread_ioctl, to avoid shmem_pread being called for non-shmem backed objects (Tvrtko) v10: Moved the write_domain check to needs_clflush and tiling mode check to pwrite_fast (Chris) v11: Use pwrite_fast fallback for all objects (shmem and non-shmem backed), call fast_user_write regardless of pagefault in previous iteration v12: Use page-by-page copy for slow user access too (Chris) v13: Handled EFAULT, Avoid use of WARN_ON, put_fence only if whole obj pinned (Chris) v14: Corrected datatypes/initializations (Tvrtko) Testcase: igt/gem_stolen, igt/gem_pread, igt/gem_pwrite Signed-off-by: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465548783-19712-1-git-send-email-ankitprasad.r.sharma@intel.com
2016-06-10 16:53:03 +08:00
struct drm_device *dev = obj->base.dev;
struct drm_mm_node node;
uint64_t remain, offset;
char __user *user_data;
int ret;
drm/i915: Support for pread/pwrite from/to non shmem backed objects This patch adds support for extending the pread/pwrite functionality for objects not backed by shmem. The access will be made through gtt interface. This will cover objects backed by stolen memory as well as other non-shmem backed objects. v2: Drop locks around slow_user_access, prefault the pages before access (Chris) v3: Rebased to the latest drm-intel-nightly (Ankit) v4: Moved page base & offset calculations outside the copy loop, corrected data types for size and offset variables, corrected if-else braces format (Tvrtko/kerneldocs) v5: Enabled pread/pwrite for all non-shmem backed objects including without tiling restrictions (Ankit) v6: Using pwrite_fast for non-shmem backed objects as well (Chris) v7: Updated commit message, Renamed i915_gem_gtt_read to i915_gem_gtt_copy, added pwrite slow path for non-shmem backed objects (Chris/Tvrtko) v8: Updated v7 commit message, mutex unlock around pwrite slow path for non-shmem backed objects (Tvrtko) v9: Corrected check during pread_ioctl, to avoid shmem_pread being called for non-shmem backed objects (Tvrtko) v10: Moved the write_domain check to needs_clflush and tiling mode check to pwrite_fast (Chris) v11: Use pwrite_fast fallback for all objects (shmem and non-shmem backed), call fast_user_write regardless of pagefault in previous iteration v12: Use page-by-page copy for slow user access too (Chris) v13: Handled EFAULT, Avoid use of WARN_ON, put_fence only if whole obj pinned (Chris) v14: Corrected datatypes/initializations (Tvrtko) Testcase: igt/gem_stolen, igt/gem_pread, igt/gem_pwrite Signed-off-by: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465548783-19712-1-git-send-email-ankitprasad.r.sharma@intel.com
2016-06-10 16:53:03 +08:00
bool hit_slow_path = false;
if (obj->tiling_mode != I915_TILING_NONE)
return -EFAULT;
ret = i915_gem_obj_ggtt_pin(obj, 0, PIN_MAPPABLE | PIN_NONBLOCK);
if (ret) {
ret = insert_mappable_node(i915, &node, PAGE_SIZE);
if (ret)
goto out;
ret = i915_gem_object_get_pages(obj);
if (ret) {
remove_mappable_node(&node);
goto out;
}
i915_gem_object_pin_pages(obj);
} else {
node.start = i915_gem_obj_ggtt_offset(obj);
node.allocated = false;
drm/i915: Support for pread/pwrite from/to non shmem backed objects This patch adds support for extending the pread/pwrite functionality for objects not backed by shmem. The access will be made through gtt interface. This will cover objects backed by stolen memory as well as other non-shmem backed objects. v2: Drop locks around slow_user_access, prefault the pages before access (Chris) v3: Rebased to the latest drm-intel-nightly (Ankit) v4: Moved page base & offset calculations outside the copy loop, corrected data types for size and offset variables, corrected if-else braces format (Tvrtko/kerneldocs) v5: Enabled pread/pwrite for all non-shmem backed objects including without tiling restrictions (Ankit) v6: Using pwrite_fast for non-shmem backed objects as well (Chris) v7: Updated commit message, Renamed i915_gem_gtt_read to i915_gem_gtt_copy, added pwrite slow path for non-shmem backed objects (Chris/Tvrtko) v8: Updated v7 commit message, mutex unlock around pwrite slow path for non-shmem backed objects (Tvrtko) v9: Corrected check during pread_ioctl, to avoid shmem_pread being called for non-shmem backed objects (Tvrtko) v10: Moved the write_domain check to needs_clflush and tiling mode check to pwrite_fast (Chris) v11: Use pwrite_fast fallback for all objects (shmem and non-shmem backed), call fast_user_write regardless of pagefault in previous iteration v12: Use page-by-page copy for slow user access too (Chris) v13: Handled EFAULT, Avoid use of WARN_ON, put_fence only if whole obj pinned (Chris) v14: Corrected datatypes/initializations (Tvrtko) Testcase: igt/gem_stolen, igt/gem_pread, igt/gem_pwrite Signed-off-by: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465548783-19712-1-git-send-email-ankitprasad.r.sharma@intel.com
2016-06-10 16:53:03 +08:00
ret = i915_gem_object_put_fence(obj);
if (ret)
goto out_unpin;
}
ret = i915_gem_object_set_to_gtt_domain(obj, true);
if (ret)
goto out_unpin;
intel_fb_obj_invalidate(obj, ORIGIN_GTT);
obj->dirty = true;
user_data = u64_to_user_ptr(args->data_ptr);
offset = args->offset;
remain = args->size;
while (remain) {
/* Operation in this page
*
* page_base = page offset within aperture
* page_offset = offset within page
* page_length = bytes to copy for this page
*/
u32 page_base = node.start;
unsigned page_offset = offset_in_page(offset);
unsigned page_length = PAGE_SIZE - page_offset;
page_length = remain < page_length ? remain : page_length;
if (node.allocated) {
wmb(); /* flush the write before we modify the GGTT */
ggtt->base.insert_page(&ggtt->base,
i915_gem_object_get_dma_address(obj, offset >> PAGE_SHIFT),
node.start, I915_CACHE_NONE, 0);
wmb(); /* flush modifications to the GGTT (insert_page) */
} else {
page_base += offset & PAGE_MASK;
}
/* If we get a fault while copying data, then (presumably) our
* source page isn't available. Return the error and we'll
* retry in the slow path.
drm/i915: Support for pread/pwrite from/to non shmem backed objects This patch adds support for extending the pread/pwrite functionality for objects not backed by shmem. The access will be made through gtt interface. This will cover objects backed by stolen memory as well as other non-shmem backed objects. v2: Drop locks around slow_user_access, prefault the pages before access (Chris) v3: Rebased to the latest drm-intel-nightly (Ankit) v4: Moved page base & offset calculations outside the copy loop, corrected data types for size and offset variables, corrected if-else braces format (Tvrtko/kerneldocs) v5: Enabled pread/pwrite for all non-shmem backed objects including without tiling restrictions (Ankit) v6: Using pwrite_fast for non-shmem backed objects as well (Chris) v7: Updated commit message, Renamed i915_gem_gtt_read to i915_gem_gtt_copy, added pwrite slow path for non-shmem backed objects (Chris/Tvrtko) v8: Updated v7 commit message, mutex unlock around pwrite slow path for non-shmem backed objects (Tvrtko) v9: Corrected check during pread_ioctl, to avoid shmem_pread being called for non-shmem backed objects (Tvrtko) v10: Moved the write_domain check to needs_clflush and tiling mode check to pwrite_fast (Chris) v11: Use pwrite_fast fallback for all objects (shmem and non-shmem backed), call fast_user_write regardless of pagefault in previous iteration v12: Use page-by-page copy for slow user access too (Chris) v13: Handled EFAULT, Avoid use of WARN_ON, put_fence only if whole obj pinned (Chris) v14: Corrected datatypes/initializations (Tvrtko) Testcase: igt/gem_stolen, igt/gem_pread, igt/gem_pwrite Signed-off-by: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465548783-19712-1-git-send-email-ankitprasad.r.sharma@intel.com
2016-06-10 16:53:03 +08:00
* If the object is non-shmem backed, we retry again with the
* path that handles page fault.
*/
if (fast_user_write(ggtt->mappable, page_base,
page_offset, user_data, page_length)) {
drm/i915: Support for pread/pwrite from/to non shmem backed objects This patch adds support for extending the pread/pwrite functionality for objects not backed by shmem. The access will be made through gtt interface. This will cover objects backed by stolen memory as well as other non-shmem backed objects. v2: Drop locks around slow_user_access, prefault the pages before access (Chris) v3: Rebased to the latest drm-intel-nightly (Ankit) v4: Moved page base & offset calculations outside the copy loop, corrected data types for size and offset variables, corrected if-else braces format (Tvrtko/kerneldocs) v5: Enabled pread/pwrite for all non-shmem backed objects including without tiling restrictions (Ankit) v6: Using pwrite_fast for non-shmem backed objects as well (Chris) v7: Updated commit message, Renamed i915_gem_gtt_read to i915_gem_gtt_copy, added pwrite slow path for non-shmem backed objects (Chris/Tvrtko) v8: Updated v7 commit message, mutex unlock around pwrite slow path for non-shmem backed objects (Tvrtko) v9: Corrected check during pread_ioctl, to avoid shmem_pread being called for non-shmem backed objects (Tvrtko) v10: Moved the write_domain check to needs_clflush and tiling mode check to pwrite_fast (Chris) v11: Use pwrite_fast fallback for all objects (shmem and non-shmem backed), call fast_user_write regardless of pagefault in previous iteration v12: Use page-by-page copy for slow user access too (Chris) v13: Handled EFAULT, Avoid use of WARN_ON, put_fence only if whole obj pinned (Chris) v14: Corrected datatypes/initializations (Tvrtko) Testcase: igt/gem_stolen, igt/gem_pread, igt/gem_pwrite Signed-off-by: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465548783-19712-1-git-send-email-ankitprasad.r.sharma@intel.com
2016-06-10 16:53:03 +08:00
hit_slow_path = true;
mutex_unlock(&dev->struct_mutex);
if (slow_user_access(ggtt->mappable,
page_base,
page_offset, user_data,
page_length, true)) {
ret = -EFAULT;
mutex_lock(&dev->struct_mutex);
goto out_flush;
}
mutex_lock(&dev->struct_mutex);
}
remain -= page_length;
user_data += page_length;
offset += page_length;
}
out_flush:
drm/i915: Support for pread/pwrite from/to non shmem backed objects This patch adds support for extending the pread/pwrite functionality for objects not backed by shmem. The access will be made through gtt interface. This will cover objects backed by stolen memory as well as other non-shmem backed objects. v2: Drop locks around slow_user_access, prefault the pages before access (Chris) v3: Rebased to the latest drm-intel-nightly (Ankit) v4: Moved page base & offset calculations outside the copy loop, corrected data types for size and offset variables, corrected if-else braces format (Tvrtko/kerneldocs) v5: Enabled pread/pwrite for all non-shmem backed objects including without tiling restrictions (Ankit) v6: Using pwrite_fast for non-shmem backed objects as well (Chris) v7: Updated commit message, Renamed i915_gem_gtt_read to i915_gem_gtt_copy, added pwrite slow path for non-shmem backed objects (Chris/Tvrtko) v8: Updated v7 commit message, mutex unlock around pwrite slow path for non-shmem backed objects (Tvrtko) v9: Corrected check during pread_ioctl, to avoid shmem_pread being called for non-shmem backed objects (Tvrtko) v10: Moved the write_domain check to needs_clflush and tiling mode check to pwrite_fast (Chris) v11: Use pwrite_fast fallback for all objects (shmem and non-shmem backed), call fast_user_write regardless of pagefault in previous iteration v12: Use page-by-page copy for slow user access too (Chris) v13: Handled EFAULT, Avoid use of WARN_ON, put_fence only if whole obj pinned (Chris) v14: Corrected datatypes/initializations (Tvrtko) Testcase: igt/gem_stolen, igt/gem_pread, igt/gem_pwrite Signed-off-by: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465548783-19712-1-git-send-email-ankitprasad.r.sharma@intel.com
2016-06-10 16:53:03 +08:00
if (hit_slow_path) {
if (ret == 0 &&
(obj->base.read_domains & I915_GEM_DOMAIN_GTT) == 0) {
/* The user has modified the object whilst we tried
* reading from it, and we now have no idea what domain
* the pages should be in. As we have just been touching
* them directly, flush everything back to the GTT
* domain.
*/
ret = i915_gem_object_set_to_gtt_domain(obj, false);
}
}
intel_fb_obj_flush(obj, false, ORIGIN_GTT);
out_unpin:
if (node.allocated) {
wmb();
ggtt->base.clear_range(&ggtt->base,
node.start, node.size,
true);
i915_gem_object_unpin_pages(obj);
remove_mappable_node(&node);
} else {
i915_gem_object_ggtt_unpin(obj);
}
out:
return ret;
}
/* Per-page copy function for the shmem pwrite fastpath.
* Flushes invalid cachelines before writing to the target if
* needs_clflush_before is set and flushes out any written cachelines after
* writing if needs_clflush is set. */
static int
shmem_pwrite_fast(struct page *page, int shmem_page_offset, int page_length,
char __user *user_data,
bool page_do_bit17_swizzling,
bool needs_clflush_before,
bool needs_clflush_after)
{
char *vaddr;
int ret;
if (unlikely(page_do_bit17_swizzling))
return -EINVAL;
vaddr = kmap_atomic(page);
if (needs_clflush_before)
drm_clflush_virt_range(vaddr + shmem_page_offset,
page_length);
ret = __copy_from_user_inatomic(vaddr + shmem_page_offset,
user_data, page_length);
if (needs_clflush_after)
drm_clflush_virt_range(vaddr + shmem_page_offset,
page_length);
kunmap_atomic(vaddr);
return ret ? -EFAULT : 0;
}
/* Only difference to the fast-path function is that this can handle bit17
* and uses non-atomic copy and kmap functions. */
static int
shmem_pwrite_slow(struct page *page, int shmem_page_offset, int page_length,
char __user *user_data,
bool page_do_bit17_swizzling,
bool needs_clflush_before,
bool needs_clflush_after)
{
char *vaddr;
int ret;
vaddr = kmap(page);
if (unlikely(needs_clflush_before || page_do_bit17_swizzling))
shmem_clflush_swizzled_range(vaddr + shmem_page_offset,
page_length,
page_do_bit17_swizzling);
if (page_do_bit17_swizzling)
ret = __copy_from_user_swizzled(vaddr, shmem_page_offset,
user_data,
page_length);
else
ret = __copy_from_user(vaddr + shmem_page_offset,
user_data,
page_length);
if (needs_clflush_after)
shmem_clflush_swizzled_range(vaddr + shmem_page_offset,
page_length,
page_do_bit17_swizzling);
kunmap(page);
return ret ? -EFAULT : 0;
}
static int
i915_gem_shmem_pwrite(struct drm_device *dev,
struct drm_i915_gem_object *obj,
struct drm_i915_gem_pwrite *args,
struct drm_file *file)
{
ssize_t remain;
drm/i915: rewrite shmem_pwrite_slow to use copy_from_user ... instead of get_user_pages, because that fails on non page-backed user addresses like e.g. a gtt mapping of a bo. To get there essentially copy the vfs read path into pagecache. We can't call that right away because we have to take care of bit17 swizzling. To not deadlock with our own pagefault handler we need to completely drop struct_mutex, reducing the atomicty-guarantees of our userspace abi. Implications for racing with other gem ioctl: - execbuf, pwrite, pread: Due to -EFAULT fallback to slow paths there's already the risk of the pwrite call not being atomic, no degration. - read/write access to mmaps: already fully racy, no degration. - set_tiling: Calling set_tiling while reading/writing is already pretty much undefined, now it just got a bit worse. set_tiling is only called by libdrm on unused/new bos, so no problem. - set_domain: When changing to the gtt domain while copying (without any read/write access, e.g. for synchronization), we might leave unflushed data in the cpu caches. The clflush_object at the end of pwrite_slow takes care of this problem. - truncating of purgeable objects: the shmem_read_mapping_page call could reinstate backing storage for truncated objects. The check at the end of pwrite_slow takes care of this. v2: - add missing intel_gtt_chipset_flush - add __ to copy_from_user_swizzled as suggest by Chris Wilson. v3: Fixup bit17 swizzling, it swizzled the wrong pages. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-12-14 20:57:31 +08:00
loff_t offset;
char __user *user_data;
int shmem_page_offset, page_length, ret = 0;
drm/i915: rewrite shmem_pwrite_slow to use copy_from_user ... instead of get_user_pages, because that fails on non page-backed user addresses like e.g. a gtt mapping of a bo. To get there essentially copy the vfs read path into pagecache. We can't call that right away because we have to take care of bit17 swizzling. To not deadlock with our own pagefault handler we need to completely drop struct_mutex, reducing the atomicty-guarantees of our userspace abi. Implications for racing with other gem ioctl: - execbuf, pwrite, pread: Due to -EFAULT fallback to slow paths there's already the risk of the pwrite call not being atomic, no degration. - read/write access to mmaps: already fully racy, no degration. - set_tiling: Calling set_tiling while reading/writing is already pretty much undefined, now it just got a bit worse. set_tiling is only called by libdrm on unused/new bos, so no problem. - set_domain: When changing to the gtt domain while copying (without any read/write access, e.g. for synchronization), we might leave unflushed data in the cpu caches. The clflush_object at the end of pwrite_slow takes care of this problem. - truncating of purgeable objects: the shmem_read_mapping_page call could reinstate backing storage for truncated objects. The check at the end of pwrite_slow takes care of this. v2: - add missing intel_gtt_chipset_flush - add __ to copy_from_user_swizzled as suggest by Chris Wilson. v3: Fixup bit17 swizzling, it swizzled the wrong pages. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-12-14 20:57:31 +08:00
int obj_do_bit17_swizzling, page_do_bit17_swizzling;
int hit_slowpath = 0;
int needs_clflush_after = 0;
int needs_clflush_before = 0;
struct sg_page_iter sg_iter;
user_data = u64_to_user_ptr(args->data_ptr);
remain = args->size;
drm/i915: rewrite shmem_pwrite_slow to use copy_from_user ... instead of get_user_pages, because that fails on non page-backed user addresses like e.g. a gtt mapping of a bo. To get there essentially copy the vfs read path into pagecache. We can't call that right away because we have to take care of bit17 swizzling. To not deadlock with our own pagefault handler we need to completely drop struct_mutex, reducing the atomicty-guarantees of our userspace abi. Implications for racing with other gem ioctl: - execbuf, pwrite, pread: Due to -EFAULT fallback to slow paths there's already the risk of the pwrite call not being atomic, no degration. - read/write access to mmaps: already fully racy, no degration. - set_tiling: Calling set_tiling while reading/writing is already pretty much undefined, now it just got a bit worse. set_tiling is only called by libdrm on unused/new bos, so no problem. - set_domain: When changing to the gtt domain while copying (without any read/write access, e.g. for synchronization), we might leave unflushed data in the cpu caches. The clflush_object at the end of pwrite_slow takes care of this problem. - truncating of purgeable objects: the shmem_read_mapping_page call could reinstate backing storage for truncated objects. The check at the end of pwrite_slow takes care of this. v2: - add missing intel_gtt_chipset_flush - add __ to copy_from_user_swizzled as suggest by Chris Wilson. v3: Fixup bit17 swizzling, it swizzled the wrong pages. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-12-14 20:57:31 +08:00
obj_do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj);
drm/i915: Wait on external rendering for GEM objects When transitioning to the GTT or CPU domain we wait on all rendering from i915 to complete (with the optimisation of allowing concurrent read access by both the GPU and client). We don't yet ensure all rendering from third parties (tracked by implicit fences on the dma-buf) is complete. Since implicitly tracked rendering by third parties will ignore our cache-domain tracking, we have to always wait upon rendering from third-parties when transitioning to direct access to the backing store. We still rely on clients notifying us of cache domain changes (i.e. they need to move to the GTT read or write domain after doing a CPU access before letting the third party render again). v2: This introduces a potential WARN_ON into i915_gem_object_free() as the current i915_vma_unbind() calls i915_gem_object_wait_rendering(). To hit this path we first need to render with the GPU, have a dma-buf attached with an unsignaled fence and then interrupt the wait. It does get fixed later in the series (when i915_vma_unbind() only waits on the active VMA and not all, including third-party, rendering. To offset that risk, use the __i915_vma_unbind_no_wait hack. Testcase: igt/prime_vgem/basic-fence-read Testcase: igt/prime_vgem/basic-fence-mmap Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-8-git-send-email-chris@chris-wilson.co.uk
2016-07-20 16:21:15 +08:00
ret = i915_gem_object_wait_rendering(obj, false);
if (ret)
return ret;
if (obj->base.write_domain != I915_GEM_DOMAIN_CPU) {
/* If we're not in the cpu write domain, set ourself into the gtt
* write domain and manually flush cachelines (if required). This
* optimizes for the case when the gpu will use the data
* right away and we therefore have to clflush anyway. */
needs_clflush_after = cpu_write_needs_clflush(obj);
}
drm/i915: Update rules for reading cache lines through the LLC The LLC is a fun device. The cache is a distinct functional block within the SA that arbitrates access from both the CPU and GPU cores. As such all writes to memory land first in the LLC before further action is taken. For example, an uncached write from either the CPU or GPU will then proceed to memory and evict the cacheline from the LLC. This means that a read from the LLC always returns the correct information even if the PTE bit in the GPU differs from the PAT bit in the CPU. For the older snooping architecture on non-LLC, the fundamental principle still holds except that some coordination is required between the CPU and GPU to explicitly perform the snooping (which is handled by our request tracking). The upshot of this is that we know that we can issue a read from either LLC devices or snoopable memory and trust the contents of the cache - i.e. we can forgo a clflush before a read in these circumstances. Writing to memory from the CPU is a little more tricky as we have to consider that the scanout does not read from the CPU cache at all, but from main memory. So we have to currently treat all requests to write to uncached memory as having to be flushed to main memory for coherency with all consumers. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-08 21:41:03 +08:00
/* Same trick applies to invalidate partially written cachelines read
* before writing. */
if ((obj->base.read_domains & I915_GEM_DOMAIN_CPU) == 0)
needs_clflush_before =
!cpu_cache_is_coherent(dev, obj->cache_level);
ret = i915_gem_object_get_pages(obj);
if (ret)
return ret;
intel_fb_obj_invalidate(obj, ORIGIN_CPU);
i915_gem_object_pin_pages(obj);
offset = args->offset;
obj->dirty = 1;
for_each_sg_page(obj->pages->sgl, &sg_iter, obj->pages->nents,
offset >> PAGE_SHIFT) {
struct page *page = sg_page_iter_page(&sg_iter);
int partial_cacheline_write;
if (remain <= 0)
break;
/* Operation in this page
*
* shmem_page_offset = offset within page in shmem file
* page_length = bytes to copy for this page
*/
shmem_page_offset = offset_in_page(offset);
page_length = remain;
if ((shmem_page_offset + page_length) > PAGE_SIZE)
page_length = PAGE_SIZE - shmem_page_offset;
/* If we don't overwrite a cacheline completely we need to be
* careful to have up-to-date data by first clflushing. Don't
* overcomplicate things and flush the entire patch. */
partial_cacheline_write = needs_clflush_before &&
((shmem_page_offset | page_length)
& (boot_cpu_data.x86_clflush_size - 1));
drm/i915: rewrite shmem_pwrite_slow to use copy_from_user ... instead of get_user_pages, because that fails on non page-backed user addresses like e.g. a gtt mapping of a bo. To get there essentially copy the vfs read path into pagecache. We can't call that right away because we have to take care of bit17 swizzling. To not deadlock with our own pagefault handler we need to completely drop struct_mutex, reducing the atomicty-guarantees of our userspace abi. Implications for racing with other gem ioctl: - execbuf, pwrite, pread: Due to -EFAULT fallback to slow paths there's already the risk of the pwrite call not being atomic, no degration. - read/write access to mmaps: already fully racy, no degration. - set_tiling: Calling set_tiling while reading/writing is already pretty much undefined, now it just got a bit worse. set_tiling is only called by libdrm on unused/new bos, so no problem. - set_domain: When changing to the gtt domain while copying (without any read/write access, e.g. for synchronization), we might leave unflushed data in the cpu caches. The clflush_object at the end of pwrite_slow takes care of this problem. - truncating of purgeable objects: the shmem_read_mapping_page call could reinstate backing storage for truncated objects. The check at the end of pwrite_slow takes care of this. v2: - add missing intel_gtt_chipset_flush - add __ to copy_from_user_swizzled as suggest by Chris Wilson. v3: Fixup bit17 swizzling, it swizzled the wrong pages. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-12-14 20:57:31 +08:00
page_do_bit17_swizzling = obj_do_bit17_swizzling &&
(page_to_phys(page) & (1 << 17)) != 0;
ret = shmem_pwrite_fast(page, shmem_page_offset, page_length,
user_data, page_do_bit17_swizzling,
partial_cacheline_write,
needs_clflush_after);
if (ret == 0)
goto next_page;
hit_slowpath = 1;
mutex_unlock(&dev->struct_mutex);
ret = shmem_pwrite_slow(page, shmem_page_offset, page_length,
user_data, page_do_bit17_swizzling,
partial_cacheline_write,
needs_clflush_after);
mutex_lock(&dev->struct_mutex);
if (ret)
drm/i915: rewrite shmem_pwrite_slow to use copy_from_user ... instead of get_user_pages, because that fails on non page-backed user addresses like e.g. a gtt mapping of a bo. To get there essentially copy the vfs read path into pagecache. We can't call that right away because we have to take care of bit17 swizzling. To not deadlock with our own pagefault handler we need to completely drop struct_mutex, reducing the atomicty-guarantees of our userspace abi. Implications for racing with other gem ioctl: - execbuf, pwrite, pread: Due to -EFAULT fallback to slow paths there's already the risk of the pwrite call not being atomic, no degration. - read/write access to mmaps: already fully racy, no degration. - set_tiling: Calling set_tiling while reading/writing is already pretty much undefined, now it just got a bit worse. set_tiling is only called by libdrm on unused/new bos, so no problem. - set_domain: When changing to the gtt domain while copying (without any read/write access, e.g. for synchronization), we might leave unflushed data in the cpu caches. The clflush_object at the end of pwrite_slow takes care of this problem. - truncating of purgeable objects: the shmem_read_mapping_page call could reinstate backing storage for truncated objects. The check at the end of pwrite_slow takes care of this. v2: - add missing intel_gtt_chipset_flush - add __ to copy_from_user_swizzled as suggest by Chris Wilson. v3: Fixup bit17 swizzling, it swizzled the wrong pages. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-12-14 20:57:31 +08:00
goto out;
next_page:
remain -= page_length;
drm/i915: rewrite shmem_pwrite_slow to use copy_from_user ... instead of get_user_pages, because that fails on non page-backed user addresses like e.g. a gtt mapping of a bo. To get there essentially copy the vfs read path into pagecache. We can't call that right away because we have to take care of bit17 swizzling. To not deadlock with our own pagefault handler we need to completely drop struct_mutex, reducing the atomicty-guarantees of our userspace abi. Implications for racing with other gem ioctl: - execbuf, pwrite, pread: Due to -EFAULT fallback to slow paths there's already the risk of the pwrite call not being atomic, no degration. - read/write access to mmaps: already fully racy, no degration. - set_tiling: Calling set_tiling while reading/writing is already pretty much undefined, now it just got a bit worse. set_tiling is only called by libdrm on unused/new bos, so no problem. - set_domain: When changing to the gtt domain while copying (without any read/write access, e.g. for synchronization), we might leave unflushed data in the cpu caches. The clflush_object at the end of pwrite_slow takes care of this problem. - truncating of purgeable objects: the shmem_read_mapping_page call could reinstate backing storage for truncated objects. The check at the end of pwrite_slow takes care of this. v2: - add missing intel_gtt_chipset_flush - add __ to copy_from_user_swizzled as suggest by Chris Wilson. v3: Fixup bit17 swizzling, it swizzled the wrong pages. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-12-14 20:57:31 +08:00
user_data += page_length;
offset += page_length;
}
out:
i915_gem_object_unpin_pages(obj);
if (hit_slowpath) {
/*
* Fixup: Flush cpu caches in case we didn't flush the dirty
* cachelines in-line while writing and the object moved
* out of the cpu write domain while we've dropped the lock.
*/
if (!needs_clflush_after &&
obj->base.write_domain != I915_GEM_DOMAIN_CPU) {
if (i915_gem_clflush_object(obj, obj->pin_display))
needs_clflush_after = true;
}
drm/i915: rewrite shmem_pwrite_slow to use copy_from_user ... instead of get_user_pages, because that fails on non page-backed user addresses like e.g. a gtt mapping of a bo. To get there essentially copy the vfs read path into pagecache. We can't call that right away because we have to take care of bit17 swizzling. To not deadlock with our own pagefault handler we need to completely drop struct_mutex, reducing the atomicty-guarantees of our userspace abi. Implications for racing with other gem ioctl: - execbuf, pwrite, pread: Due to -EFAULT fallback to slow paths there's already the risk of the pwrite call not being atomic, no degration. - read/write access to mmaps: already fully racy, no degration. - set_tiling: Calling set_tiling while reading/writing is already pretty much undefined, now it just got a bit worse. set_tiling is only called by libdrm on unused/new bos, so no problem. - set_domain: When changing to the gtt domain while copying (without any read/write access, e.g. for synchronization), we might leave unflushed data in the cpu caches. The clflush_object at the end of pwrite_slow takes care of this problem. - truncating of purgeable objects: the shmem_read_mapping_page call could reinstate backing storage for truncated objects. The check at the end of pwrite_slow takes care of this. v2: - add missing intel_gtt_chipset_flush - add __ to copy_from_user_swizzled as suggest by Chris Wilson. v3: Fixup bit17 swizzling, it swizzled the wrong pages. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-12-14 20:57:31 +08:00
}
if (needs_clflush_after)
i915_gem_chipset_flush(to_i915(dev));
else
obj->cache_dirty = true;
intel_fb_obj_flush(obj, false, ORIGIN_CPU);
return ret;
}
/**
* Writes data to the object referenced by handle.
* @dev: drm device
* @data: ioctl data blob
* @file: drm file
*
* On error, the contents of the buffer that were to be modified are undefined.
*/
int
i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct drm_i915_gem_pwrite *args = data;
struct drm_i915_gem_object *obj;
drm/i915: Do not hold mutex when faulting in user addresses Linus Torvalds found that it was rather trivial to trigger a system freeze: In fact, with lockdep, I don't even need to do the sysrq-d thing: it shows the bug as it happens. It's the X server taking the same lock recursively. Here's the problem: ============================================= [ INFO: possible recursive locking detected ] 2.6.37-rc2-00012-gbdbd01a #7 --------------------------------------------- Xorg/2816 is trying to acquire lock: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c626c>] i915_gem_fault+0x50/0x17e but task is already holding lock: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c403b>] i915_mutex_lock_interruptible+0x28/0x4a other info that might help us debug this: 2 locks held by Xorg/2816: #0: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c403b>] i915_mutex_lock_interruptible+0x28/0x4a #1: (&mm->mmap_sem){++++++}, at: [<ffffffff81022d4f>] page_fault+0x156/0x37b This recursion was introduced by rearranging the locking to avoid the double locking on the fast path (4f27b5d and fbd5a26d) and the introduction of the prefault to encourage the fast paths (b5e4f2b). In order to undo the problem, we rearrange the code to perform the access validation upfront, attempt to prefault and then fight for control of the mutex. the best case scenario where the mutex is uncontended the prefaulting is not wasted. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-17 17:10:42 +08:00
int ret;
if (args->size == 0)
return 0;
if (!access_ok(VERIFY_READ,
u64_to_user_ptr(args->data_ptr),
drm/i915: Do not hold mutex when faulting in user addresses Linus Torvalds found that it was rather trivial to trigger a system freeze: In fact, with lockdep, I don't even need to do the sysrq-d thing: it shows the bug as it happens. It's the X server taking the same lock recursively. Here's the problem: ============================================= [ INFO: possible recursive locking detected ] 2.6.37-rc2-00012-gbdbd01a #7 --------------------------------------------- Xorg/2816 is trying to acquire lock: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c626c>] i915_gem_fault+0x50/0x17e but task is already holding lock: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c403b>] i915_mutex_lock_interruptible+0x28/0x4a other info that might help us debug this: 2 locks held by Xorg/2816: #0: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c403b>] i915_mutex_lock_interruptible+0x28/0x4a #1: (&mm->mmap_sem){++++++}, at: [<ffffffff81022d4f>] page_fault+0x156/0x37b This recursion was introduced by rearranging the locking to avoid the double locking on the fast path (4f27b5d and fbd5a26d) and the introduction of the prefault to encourage the fast paths (b5e4f2b). In order to undo the problem, we rearrange the code to perform the access validation upfront, attempt to prefault and then fight for control of the mutex. the best case scenario where the mutex is uncontended the prefaulting is not wasted. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-17 17:10:42 +08:00
args->size))
return -EFAULT;
if (likely(!i915.prefault_disable)) {
ret = fault_in_multipages_readable(u64_to_user_ptr(args->data_ptr),
args->size);
if (ret)
return -EFAULT;
}
intel_runtime_pm_get(dev_priv);
ret = i915_mutex_lock_interruptible(dev);
if (ret)
goto put_rpm;
obj = i915_gem_object_lookup(file, args->handle);
if (!obj) {
ret = -ENOENT;
goto unlock;
}
/* Bounds check destination. */
if (args->offset > obj->base.size ||
args->size > obj->base.size - args->offset) {
ret = -EINVAL;
goto out;
}
trace_i915_gem_object_pwrite(obj, args->offset, args->size);
ret = -EFAULT;
/* We can only do the GTT pwrite on untiled buffers, as otherwise
* it would end up going through the fenced access, and we'll get
* different detiling behavior between reading and writing.
* pread/pwrite currently are reading and writing from the CPU
* perspective, requiring manual detiling by the client.
*/
if (!i915_gem_object_has_struct_page(obj) ||
cpu_write_needs_clflush(obj)) {
ret = i915_gem_gtt_pwrite_fast(dev_priv, obj, args, file);
/* Note that the gtt paths might fail with non-page-backed user
* pointers (e.g. gtt mappings when moving data between
* textures). Fallback to the shmem path in that case. */
}
if (ret == -EFAULT || ret == -ENOSPC) {
if (obj->phys_handle)
ret = i915_gem_phys_pwrite(obj, args, file);
else if (i915_gem_object_has_struct_page(obj))
ret = i915_gem_shmem_pwrite(dev, obj, args, file);
drm/i915: Support for pread/pwrite from/to non shmem backed objects This patch adds support for extending the pread/pwrite functionality for objects not backed by shmem. The access will be made through gtt interface. This will cover objects backed by stolen memory as well as other non-shmem backed objects. v2: Drop locks around slow_user_access, prefault the pages before access (Chris) v3: Rebased to the latest drm-intel-nightly (Ankit) v4: Moved page base & offset calculations outside the copy loop, corrected data types for size and offset variables, corrected if-else braces format (Tvrtko/kerneldocs) v5: Enabled pread/pwrite for all non-shmem backed objects including without tiling restrictions (Ankit) v6: Using pwrite_fast for non-shmem backed objects as well (Chris) v7: Updated commit message, Renamed i915_gem_gtt_read to i915_gem_gtt_copy, added pwrite slow path for non-shmem backed objects (Chris/Tvrtko) v8: Updated v7 commit message, mutex unlock around pwrite slow path for non-shmem backed objects (Tvrtko) v9: Corrected check during pread_ioctl, to avoid shmem_pread being called for non-shmem backed objects (Tvrtko) v10: Moved the write_domain check to needs_clflush and tiling mode check to pwrite_fast (Chris) v11: Use pwrite_fast fallback for all objects (shmem and non-shmem backed), call fast_user_write regardless of pagefault in previous iteration v12: Use page-by-page copy for slow user access too (Chris) v13: Handled EFAULT, Avoid use of WARN_ON, put_fence only if whole obj pinned (Chris) v14: Corrected datatypes/initializations (Tvrtko) Testcase: igt/gem_stolen, igt/gem_pread, igt/gem_pwrite Signed-off-by: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465548783-19712-1-git-send-email-ankitprasad.r.sharma@intel.com
2016-06-10 16:53:03 +08:00
else
ret = -ENODEV;
}
out:
i915_gem_object_put(obj);
unlock:
mutex_unlock(&dev->struct_mutex);
put_rpm:
intel_runtime_pm_put(dev_priv);
return ret;
}
/**
* Ensures that all rendering to the object has completed and the object is
* safe to unbind from the GTT or access from the CPU.
* @obj: i915 gem object
* @readonly: waiting for read access or write
*/
int
i915_gem_object_wait_rendering(struct drm_i915_gem_object *obj,
bool readonly)
{
drm/i915: Wait on external rendering for GEM objects When transitioning to the GTT or CPU domain we wait on all rendering from i915 to complete (with the optimisation of allowing concurrent read access by both the GPU and client). We don't yet ensure all rendering from third parties (tracked by implicit fences on the dma-buf) is complete. Since implicitly tracked rendering by third parties will ignore our cache-domain tracking, we have to always wait upon rendering from third-parties when transitioning to direct access to the backing store. We still rely on clients notifying us of cache domain changes (i.e. they need to move to the GTT read or write domain after doing a CPU access before letting the third party render again). v2: This introduces a potential WARN_ON into i915_gem_object_free() as the current i915_vma_unbind() calls i915_gem_object_wait_rendering(). To hit this path we first need to render with the GPU, have a dma-buf attached with an unsignaled fence and then interrupt the wait. It does get fixed later in the series (when i915_vma_unbind() only waits on the active VMA and not all, including third-party, rendering. To offset that risk, use the __i915_vma_unbind_no_wait hack. Testcase: igt/prime_vgem/basic-fence-read Testcase: igt/prime_vgem/basic-fence-mmap Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-8-git-send-email-chris@chris-wilson.co.uk
2016-07-20 16:21:15 +08:00
struct reservation_object *resv;
struct i915_gem_active *active;
unsigned long active_mask;
int idx, ret;
lockdep_assert_held(&obj->base.dev->struct_mutex);
if (!readonly) {
active = obj->last_read;
active_mask = obj->active;
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
} else {
active_mask = 1;
active = &obj->last_write;
}
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
for_each_active(active_mask, idx) {
drm/i915: Refactor activity tracking for requests With the introduction of requests, we amplified the number of atomic refcounted objects we use and update every execbuffer; from none to several references, and a set of references that need to be changed. We also introduced interesting side-effects in the order of retiring requests and objects. Instead of independently tracking the last request for an object, track the active objects for each request. The object will reside in the buffer list of its most recent active request and so we reduce the kref interchange to a list_move. Now retirements are entirely driven by the request, dramatically simplifying activity tracking on the object themselves, and removing the ambiguity between retiring objects and retiring requests. Furthermore with the consolidation of managing the activity tracking centrally, we can look forward to using RCU to enable lockless lookup of the current active requests for an object. In the future, we will be able to query the status or wait upon rendering to an object without even touching the struct_mutex BKL. All told, less code, simpler and faster, and more extensible. v2: Add a typedef for the function pointer for convenience later. v3: Make the noop retirement callback explicit. Allow passing NULL to the init_request_active() which is expanded to a common noop function. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-16-git-send-email-chris@chris-wilson.co.uk
2016-08-04 14:52:35 +08:00
ret = i915_gem_active_wait(&active[idx],
&obj->base.dev->struct_mutex);
if (ret)
return ret;
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
}
drm/i915: Wait on external rendering for GEM objects When transitioning to the GTT or CPU domain we wait on all rendering from i915 to complete (with the optimisation of allowing concurrent read access by both the GPU and client). We don't yet ensure all rendering from third parties (tracked by implicit fences on the dma-buf) is complete. Since implicitly tracked rendering by third parties will ignore our cache-domain tracking, we have to always wait upon rendering from third-parties when transitioning to direct access to the backing store. We still rely on clients notifying us of cache domain changes (i.e. they need to move to the GTT read or write domain after doing a CPU access before letting the third party render again). v2: This introduces a potential WARN_ON into i915_gem_object_free() as the current i915_vma_unbind() calls i915_gem_object_wait_rendering(). To hit this path we first need to render with the GPU, have a dma-buf attached with an unsignaled fence and then interrupt the wait. It does get fixed later in the series (when i915_vma_unbind() only waits on the active VMA and not all, including third-party, rendering. To offset that risk, use the __i915_vma_unbind_no_wait hack. Testcase: igt/prime_vgem/basic-fence-read Testcase: igt/prime_vgem/basic-fence-mmap Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-8-git-send-email-chris@chris-wilson.co.uk
2016-07-20 16:21:15 +08:00
resv = i915_gem_object_get_dmabuf_resv(obj);
if (resv) {
long err;
err = reservation_object_wait_timeout_rcu(resv, !readonly, true,
MAX_SCHEDULE_TIMEOUT);
if (err < 0)
return err;
}
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
return 0;
}
/* A nonblocking variant of the above wait. This is a highly dangerous routine
* as the object state may change during this call.
*/
static __must_check int
i915_gem_object_wait_rendering__nonblocking(struct drm_i915_gem_object *obj,
struct intel_rps_client *rps,
bool readonly)
{
struct drm_device *dev = obj->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct drm_i915_gem_request *requests[I915_NUM_ENGINES];
struct i915_gem_active *active;
unsigned long active_mask;
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
int ret, i, n = 0;
BUG_ON(!mutex_is_locked(&dev->struct_mutex));
BUG_ON(!dev_priv->mm.interruptible);
active_mask = obj->active;
if (!active_mask)
return 0;
if (!readonly) {
active = obj->last_read;
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
} else {
active_mask = 1;
active = &obj->last_write;
}
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
for_each_active(active_mask, i) {
struct drm_i915_gem_request *req;
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
req = i915_gem_active_get(&active[i],
&obj->base.dev->struct_mutex);
if (req)
requests[n++] = req;
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
}
mutex_unlock(&dev->struct_mutex);
ret = 0;
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
for (i = 0; ret == 0 && i < n; i++)
ret = i915_wait_request(requests[i], true, NULL, rps);
mutex_lock(&dev->struct_mutex);
drm/i915: Refactor activity tracking for requests With the introduction of requests, we amplified the number of atomic refcounted objects we use and update every execbuffer; from none to several references, and a set of references that need to be changed. We also introduced interesting side-effects in the order of retiring requests and objects. Instead of independently tracking the last request for an object, track the active objects for each request. The object will reside in the buffer list of its most recent active request and so we reduce the kref interchange to a list_move. Now retirements are entirely driven by the request, dramatically simplifying activity tracking on the object themselves, and removing the ambiguity between retiring objects and retiring requests. Furthermore with the consolidation of managing the activity tracking centrally, we can look forward to using RCU to enable lockless lookup of the current active requests for an object. In the future, we will be able to query the status or wait upon rendering to an object without even touching the struct_mutex BKL. All told, less code, simpler and faster, and more extensible. v2: Add a typedef for the function pointer for convenience later. v3: Make the noop retirement callback explicit. Allow passing NULL to the init_request_active() which is expanded to a common noop function. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-16-git-send-email-chris@chris-wilson.co.uk
2016-08-04 14:52:35 +08:00
for (i = 0; i < n; i++)
i915_gem_request_put(requests[i]);
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
return ret;
}
static struct intel_rps_client *to_rps_client(struct drm_file *file)
{
struct drm_i915_file_private *fpriv = file->driver_priv;
return &fpriv->rps;
}
static enum fb_op_origin
write_origin(struct drm_i915_gem_object *obj, unsigned domain)
{
return domain == I915_GEM_DOMAIN_GTT && !obj->has_wc_mmap ?
ORIGIN_GTT : ORIGIN_CPU;
}
/**
* Called when user space prepares to use an object with the CPU, either
* through the mmap ioctl's mapping or a GTT mapping.
* @dev: drm device
* @data: ioctl data blob
* @file: drm file
*/
int
i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_set_domain *args = data;
struct drm_i915_gem_object *obj;
uint32_t read_domains = args->read_domains;
uint32_t write_domain = args->write_domain;
int ret;
/* Only handle setting domains to types used by the CPU. */
if (write_domain & I915_GEM_GPU_DOMAINS)
return -EINVAL;
if (read_domains & I915_GEM_GPU_DOMAINS)
return -EINVAL;
/* Having something in the write domain implies it's in the read
* domain, and only that read domain. Enforce that in the request.
*/
if (write_domain != 0 && read_domains != write_domain)
return -EINVAL;
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
obj = i915_gem_object_lookup(file, args->handle);
if (!obj) {
ret = -ENOENT;
goto unlock;
}
/* Try to flush the object off the GPU without holding the lock.
* We will repeat the flush holding the lock in the normal manner
* to catch cases where we are gazumped.
*/
drm/i915: Flush GPU rendering with a lockless wait during a pagefault Arjan van de Ven reported that on his test machine that he was seeing stalls of greater than 1 frame greatly impacting the user experience. He tracked this down to being the locked flush during a pagefault as being the culprit hogging the struct_mutex and so blocking any other user from proceeding. Stalling on a pagefault is bad behaviour on userspace's part, for one it means that they are ignoring the coherency rules on pointer access through the GTT, but fortunately we can apply the same trick as the set-to-domain ioctl to do a lightweight, nonblocking flush of outstanding rendering first. "Prior to the patch it looks like this (this one testrun does not show the 20ms+ I've seen occasionally) 4.99 ms 2.36 ms 31360 __wait_seqno i915_wait_seqno i915_gem_object_wait_rendering i915_gem_object_set_to_gtt_domain i915_gem_fault __do_fault handle_ +pte_fault handle_mm_fault __do_page_fault do_page_fault page_fault 4.99 ms 2.75 ms 107751 __wait_seqno i915_gem_wait_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 4.99 ms 1.63 ms 1666 i915_mutex_lock_interruptible i915_gem_fault __do_fault handle_pte_fault handle_mm_fault __do_page_fault do_page_fault page_fa +ult 4.93 ms 2.45 ms 980 i915_mutex_lock_interruptible intel_crtc_page_flip drm_mode_page_flip_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_ +sysret 4.89 ms 2.20 ms 3283 i915_mutex_lock_interruptible i915_gem_wait_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 4.34 ms 1.66 ms 1715 i915_mutex_lock_interruptible i915_gem_pwrite_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 3.73 ms 3.73 ms 49 i915_mutex_lock_interruptible i915_gem_set_domain_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 3.17 ms 0.33 ms 931 i915_mutex_lock_interruptible i915_gem_madvise_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 2.97 ms 0.43 ms 1029 i915_mutex_lock_interruptible i915_gem_busy_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 2.55 ms 0.51 ms 735 i915_gem_get_tiling drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret After the patch it looks like this: 4.99 ms 2.14 ms 22212 __wait_seqno i915_gem_wait_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 4.86 ms 0.99 ms 14170 __wait_seqno i915_gem_object_wait_rendering__nonblocking i915_gem_fault __do_fault handle_pte_fault handle_mm_fault __do_page_ +fault do_page_fault page_fault 3.59 ms 1.31 ms 325 i915_gem_get_tiling drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 3.37 ms 3.37 ms 65 i915_mutex_lock_interruptible i915_gem_wait_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 2.58 ms 2.58 ms 65 i915_mutex_lock_interruptible i915_gem_do_execbuffer.isra.23 i915_gem_execbuffer2 drm_ioctl i915_compat_ioctl compat_sys_ioctl +ia32_sysret 2.19 ms 2.19 ms 65 i915_mutex_lock_interruptible intel_crtc_page_flip drm_mode_page_flip_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_ +sysret 2.18 ms 2.18 ms 65 i915_mutex_lock_interruptible i915_gem_busy_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 1.66 ms 1.66 ms 65 i915_gem_set_tiling drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret It may not look like it, but this is quite a large difference, and I've been unable to reproduce > 5 msec delays at all, while before they do happen (just not in the trace above)." gem_gtt_hog on an old Pineview (GMA3150), before: 4969.119ms after: 4122.749ms Reported-by: Arjan van de Ven <arjan.van.de.ven@intel.com> Testcase: igt/gem_gtt_hog Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-08 04:37:06 +08:00
ret = i915_gem_object_wait_rendering__nonblocking(obj,
to_rps_client(file),
drm/i915: Flush GPU rendering with a lockless wait during a pagefault Arjan van de Ven reported that on his test machine that he was seeing stalls of greater than 1 frame greatly impacting the user experience. He tracked this down to being the locked flush during a pagefault as being the culprit hogging the struct_mutex and so blocking any other user from proceeding. Stalling on a pagefault is bad behaviour on userspace's part, for one it means that they are ignoring the coherency rules on pointer access through the GTT, but fortunately we can apply the same trick as the set-to-domain ioctl to do a lightweight, nonblocking flush of outstanding rendering first. "Prior to the patch it looks like this (this one testrun does not show the 20ms+ I've seen occasionally) 4.99 ms 2.36 ms 31360 __wait_seqno i915_wait_seqno i915_gem_object_wait_rendering i915_gem_object_set_to_gtt_domain i915_gem_fault __do_fault handle_ +pte_fault handle_mm_fault __do_page_fault do_page_fault page_fault 4.99 ms 2.75 ms 107751 __wait_seqno i915_gem_wait_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 4.99 ms 1.63 ms 1666 i915_mutex_lock_interruptible i915_gem_fault __do_fault handle_pte_fault handle_mm_fault __do_page_fault do_page_fault page_fa +ult 4.93 ms 2.45 ms 980 i915_mutex_lock_interruptible intel_crtc_page_flip drm_mode_page_flip_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_ +sysret 4.89 ms 2.20 ms 3283 i915_mutex_lock_interruptible i915_gem_wait_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 4.34 ms 1.66 ms 1715 i915_mutex_lock_interruptible i915_gem_pwrite_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 3.73 ms 3.73 ms 49 i915_mutex_lock_interruptible i915_gem_set_domain_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 3.17 ms 0.33 ms 931 i915_mutex_lock_interruptible i915_gem_madvise_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 2.97 ms 0.43 ms 1029 i915_mutex_lock_interruptible i915_gem_busy_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 2.55 ms 0.51 ms 735 i915_gem_get_tiling drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret After the patch it looks like this: 4.99 ms 2.14 ms 22212 __wait_seqno i915_gem_wait_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 4.86 ms 0.99 ms 14170 __wait_seqno i915_gem_object_wait_rendering__nonblocking i915_gem_fault __do_fault handle_pte_fault handle_mm_fault __do_page_ +fault do_page_fault page_fault 3.59 ms 1.31 ms 325 i915_gem_get_tiling drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 3.37 ms 3.37 ms 65 i915_mutex_lock_interruptible i915_gem_wait_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 2.58 ms 2.58 ms 65 i915_mutex_lock_interruptible i915_gem_do_execbuffer.isra.23 i915_gem_execbuffer2 drm_ioctl i915_compat_ioctl compat_sys_ioctl +ia32_sysret 2.19 ms 2.19 ms 65 i915_mutex_lock_interruptible intel_crtc_page_flip drm_mode_page_flip_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_ +sysret 2.18 ms 2.18 ms 65 i915_mutex_lock_interruptible i915_gem_busy_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 1.66 ms 1.66 ms 65 i915_gem_set_tiling drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret It may not look like it, but this is quite a large difference, and I've been unable to reproduce > 5 msec delays at all, while before they do happen (just not in the trace above)." gem_gtt_hog on an old Pineview (GMA3150), before: 4969.119ms after: 4122.749ms Reported-by: Arjan van de Ven <arjan.van.de.ven@intel.com> Testcase: igt/gem_gtt_hog Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-08 04:37:06 +08:00
!write_domain);
if (ret)
goto unref;
if (read_domains & I915_GEM_DOMAIN_GTT)
ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0);
else
ret = i915_gem_object_set_to_cpu_domain(obj, write_domain != 0);
if (write_domain != 0)
intel_fb_obj_invalidate(obj, write_origin(obj, write_domain));
unref:
i915_gem_object_put(obj);
unlock:
mutex_unlock(&dev->struct_mutex);
return ret;
}
/**
* Called when user space has done writes to this buffer
* @dev: drm device
* @data: ioctl data blob
* @file: drm file
*/
int
i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_sw_finish *args = data;
struct drm_i915_gem_object *obj;
int ret = 0;
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
obj = i915_gem_object_lookup(file, args->handle);
if (!obj) {
ret = -ENOENT;
goto unlock;
}
/* Pinned buffers may be scanout, so flush the cache */
if (obj->pin_display)
drm/i915: Simplify flush_cpu_write_domain We can push down the decision whether to force flushing into the implementation since in all places that matter obj->pin_display is accurate already. The only place where the optimization really matters is the sw_finish_ioctl, and that already checks for obj->pin_display on its own. I suspect that this was simply an artifact of how commit 2c22569bba8af6c2976d5f9479fe54a53a39966b Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Aug 9 12:26:45 2013 +0100 drm/i915: Update rules for writing through the LLC with the cpu evolved - only v2 added the pin_display tracking. Note that we still retain the gist of this logic from the above commit with the explicit force argument for the low-level clflush function. Ville noted in his review that there's a slight behavioural change in the set_to_gtt_domain function, which now also will flush display plane data. This opens-open the potential for userspace to start doing buggy things by omitting the sw_finish_ioctl, which is why I've rejected a functional equivalent patch from Ville a while ago: http://lists.freedesktop.org/archives/intel-gfx/2013-November/036421.html But on second consideration it's not that evil, and in any case the justification here is more clarity, not allowing crazy userspace. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-21 21:53:48 +08:00
i915_gem_object_flush_cpu_write_domain(obj);
i915_gem_object_put(obj);
unlock:
mutex_unlock(&dev->struct_mutex);
return ret;
}
/**
* i915_gem_mmap_ioctl - Maps the contents of an object, returning the address
* it is mapped to.
* @dev: drm device
* @data: ioctl data blob
* @file: drm file
*
* While the mapping holds a reference on the contents of the object, it doesn't
* imply a ref on the object itself.
*
* IMPORTANT:
*
* DRM driver writers who look a this function as an example for how to do GEM
* mmap support, please don't implement mmap support like here. The modern way
* to implement DRM mmap support is with an mmap offset ioctl (like
* i915_gem_mmap_gtt) and then using the mmap syscall on the DRM fd directly.
* That way debug tooling like valgrind will understand what's going on, hiding
* the mmap call in a driver private ioctl will break that. The i915 driver only
* does cpu mmaps this way because we didn't know better.
*/
int
i915_gem_mmap_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_mmap *args = data;
struct drm_i915_gem_object *obj;
unsigned long addr;
drm/i915: Support creation of unbound wc user mappings for objects This patch provides support to create write-combining virtual mappings of GEM object. It intends to provide the same funtionality of 'mmap_gtt' interface without the constraints and contention of a limited aperture space, but requires clients handles the linear to tile conversion on their own. This is for improving the CPU write operation performance, as with such mapping, writes and reads are almost 50% faster than with mmap_gtt. Similar to the GTT mmapping, unlike the regular CPU mmapping, it avoids the cache flush after update from CPU side, when object is passed onto GPU. This type of mapping is specially useful in case of sub-region update, i.e. when only a portion of the object is to be updated. Using a CPU mmap in such cases would normally incur a clflush of the whole object, and using a GTT mmapping would likely require eviction of an active object or fence and thus stall. The write-combining CPU mmap avoids both. To ensure the cache coherency, before using this mapping, the GTT domain has been reused here. This provides the required cache flush if the object is in CPU domain or synchronization against the concurrent rendering. Although the access through an uncached mmap should automatically invalidate the cache lines, this may not be true for non-temporal write instructions and also not all pages of the object may be updated at any given point of time through this mapping. Having a call to get_pages in set_to_gtt_domain function, as added in the earlier patch 'drm/i915: Broaden application of set-domain(GTT)', would guarantee the clflush and so there will be no cachelines holding the data for the object before it is accessed through this map. The drm_i915_gem_mmap structure (for the DRM_I915_GEM_MMAP_IOCTL) has been extended with a new flags field (defaulting to 0 for existent users). In order for userspace to detect the extended ioctl, a new parameter I915_PARAM_MMAP_VERSION has been added for versioning the ioctl interface. v2: Fix error handling, invalid flag detection, renaming (ickle) v3: Rebase to latest drm-intel-nightly codebase The new mmapping is exercised by igt/gem_mmap_wc, igt/gem_concurrent_blit and igt/gem_gtt_speed. Change-Id: Ie883942f9e689525f72fe9a8d3780c3a9faa769a Signed-off-by: Akash Goel <akash.goel@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-02 18:59:30 +08:00
if (args->flags & ~(I915_MMAP_WC))
return -EINVAL;
if (args->flags & I915_MMAP_WC && !boot_cpu_has(X86_FEATURE_PAT))
drm/i915: Support creation of unbound wc user mappings for objects This patch provides support to create write-combining virtual mappings of GEM object. It intends to provide the same funtionality of 'mmap_gtt' interface without the constraints and contention of a limited aperture space, but requires clients handles the linear to tile conversion on their own. This is for improving the CPU write operation performance, as with such mapping, writes and reads are almost 50% faster than with mmap_gtt. Similar to the GTT mmapping, unlike the regular CPU mmapping, it avoids the cache flush after update from CPU side, when object is passed onto GPU. This type of mapping is specially useful in case of sub-region update, i.e. when only a portion of the object is to be updated. Using a CPU mmap in such cases would normally incur a clflush of the whole object, and using a GTT mmapping would likely require eviction of an active object or fence and thus stall. The write-combining CPU mmap avoids both. To ensure the cache coherency, before using this mapping, the GTT domain has been reused here. This provides the required cache flush if the object is in CPU domain or synchronization against the concurrent rendering. Although the access through an uncached mmap should automatically invalidate the cache lines, this may not be true for non-temporal write instructions and also not all pages of the object may be updated at any given point of time through this mapping. Having a call to get_pages in set_to_gtt_domain function, as added in the earlier patch 'drm/i915: Broaden application of set-domain(GTT)', would guarantee the clflush and so there will be no cachelines holding the data for the object before it is accessed through this map. The drm_i915_gem_mmap structure (for the DRM_I915_GEM_MMAP_IOCTL) has been extended with a new flags field (defaulting to 0 for existent users). In order for userspace to detect the extended ioctl, a new parameter I915_PARAM_MMAP_VERSION has been added for versioning the ioctl interface. v2: Fix error handling, invalid flag detection, renaming (ickle) v3: Rebase to latest drm-intel-nightly codebase The new mmapping is exercised by igt/gem_mmap_wc, igt/gem_concurrent_blit and igt/gem_gtt_speed. Change-Id: Ie883942f9e689525f72fe9a8d3780c3a9faa769a Signed-off-by: Akash Goel <akash.goel@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-02 18:59:30 +08:00
return -ENODEV;
obj = i915_gem_object_lookup(file, args->handle);
if (!obj)
return -ENOENT;
i915: add dmabuf/prime buffer sharing support. This adds handle->fd and fd->handle support to i915, this is to allow for offloading of rendering in one direction and outputs in the other. v2 from Daniel Vetter: - fixup conflicts with the prepare/finish gtt prep work. - implement ppgtt binding support. Note that we have squat i-g-t testcoverage for any of the lifetime and access rules dma_buf/prime support brings along. And there are quite a few intricate situations here. Also note that the integration with the existing code is a bit hackish, especially around get_gtt_pages and put_gtt_pages. It imo would be easier with the prep code from Chris Wilson's unbound series, but that is for 3.6. Also note that I didn't bother to put the new prepare/finish gtt hooks to good use by moving the dma_buf_map/unmap_attachment calls in there (like we've originally planned for). Last but not least this patch is only compile-tested, but I've changed very little compared to Dave Airlie's version. So there's a decent chance v2 on drm-next works as well as v1 on 3.4-rc. v3: Right when I've hit sent I've noticed that I've screwed up one obj->sg_list (for dmar support) and obj->sg_table (for prime support) disdinction. We should be able to merge these 2 paths, but that's material for another patch. v4: fix the error reporting bugs pointed out by ickle. v5: fix another error, and stop non-gtt mmaps on shared objects stop pread/pwrite on imported objects, add fake kmap Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-10 21:25:09 +08:00
/* prime objects have no backing filp to GEM mmap
* pages from.
*/
if (!obj->base.filp) {
i915_gem_object_put_unlocked(obj);
i915: add dmabuf/prime buffer sharing support. This adds handle->fd and fd->handle support to i915, this is to allow for offloading of rendering in one direction and outputs in the other. v2 from Daniel Vetter: - fixup conflicts with the prepare/finish gtt prep work. - implement ppgtt binding support. Note that we have squat i-g-t testcoverage for any of the lifetime and access rules dma_buf/prime support brings along. And there are quite a few intricate situations here. Also note that the integration with the existing code is a bit hackish, especially around get_gtt_pages and put_gtt_pages. It imo would be easier with the prep code from Chris Wilson's unbound series, but that is for 3.6. Also note that I didn't bother to put the new prepare/finish gtt hooks to good use by moving the dma_buf_map/unmap_attachment calls in there (like we've originally planned for). Last but not least this patch is only compile-tested, but I've changed very little compared to Dave Airlie's version. So there's a decent chance v2 on drm-next works as well as v1 on 3.4-rc. v3: Right when I've hit sent I've noticed that I've screwed up one obj->sg_list (for dmar support) and obj->sg_table (for prime support) disdinction. We should be able to merge these 2 paths, but that's material for another patch. v4: fix the error reporting bugs pointed out by ickle. v5: fix another error, and stop non-gtt mmaps on shared objects stop pread/pwrite on imported objects, add fake kmap Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-10 21:25:09 +08:00
return -EINVAL;
}
addr = vm_mmap(obj->base.filp, 0, args->size,
PROT_READ | PROT_WRITE, MAP_SHARED,
args->offset);
drm/i915: Support creation of unbound wc user mappings for objects This patch provides support to create write-combining virtual mappings of GEM object. It intends to provide the same funtionality of 'mmap_gtt' interface without the constraints and contention of a limited aperture space, but requires clients handles the linear to tile conversion on their own. This is for improving the CPU write operation performance, as with such mapping, writes and reads are almost 50% faster than with mmap_gtt. Similar to the GTT mmapping, unlike the regular CPU mmapping, it avoids the cache flush after update from CPU side, when object is passed onto GPU. This type of mapping is specially useful in case of sub-region update, i.e. when only a portion of the object is to be updated. Using a CPU mmap in such cases would normally incur a clflush of the whole object, and using a GTT mmapping would likely require eviction of an active object or fence and thus stall. The write-combining CPU mmap avoids both. To ensure the cache coherency, before using this mapping, the GTT domain has been reused here. This provides the required cache flush if the object is in CPU domain or synchronization against the concurrent rendering. Although the access through an uncached mmap should automatically invalidate the cache lines, this may not be true for non-temporal write instructions and also not all pages of the object may be updated at any given point of time through this mapping. Having a call to get_pages in set_to_gtt_domain function, as added in the earlier patch 'drm/i915: Broaden application of set-domain(GTT)', would guarantee the clflush and so there will be no cachelines holding the data for the object before it is accessed through this map. The drm_i915_gem_mmap structure (for the DRM_I915_GEM_MMAP_IOCTL) has been extended with a new flags field (defaulting to 0 for existent users). In order for userspace to detect the extended ioctl, a new parameter I915_PARAM_MMAP_VERSION has been added for versioning the ioctl interface. v2: Fix error handling, invalid flag detection, renaming (ickle) v3: Rebase to latest drm-intel-nightly codebase The new mmapping is exercised by igt/gem_mmap_wc, igt/gem_concurrent_blit and igt/gem_gtt_speed. Change-Id: Ie883942f9e689525f72fe9a8d3780c3a9faa769a Signed-off-by: Akash Goel <akash.goel@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-02 18:59:30 +08:00
if (args->flags & I915_MMAP_WC) {
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
if (down_write_killable(&mm->mmap_sem)) {
i915_gem_object_put_unlocked(obj);
return -EINTR;
}
drm/i915: Support creation of unbound wc user mappings for objects This patch provides support to create write-combining virtual mappings of GEM object. It intends to provide the same funtionality of 'mmap_gtt' interface without the constraints and contention of a limited aperture space, but requires clients handles the linear to tile conversion on their own. This is for improving the CPU write operation performance, as with such mapping, writes and reads are almost 50% faster than with mmap_gtt. Similar to the GTT mmapping, unlike the regular CPU mmapping, it avoids the cache flush after update from CPU side, when object is passed onto GPU. This type of mapping is specially useful in case of sub-region update, i.e. when only a portion of the object is to be updated. Using a CPU mmap in such cases would normally incur a clflush of the whole object, and using a GTT mmapping would likely require eviction of an active object or fence and thus stall. The write-combining CPU mmap avoids both. To ensure the cache coherency, before using this mapping, the GTT domain has been reused here. This provides the required cache flush if the object is in CPU domain or synchronization against the concurrent rendering. Although the access through an uncached mmap should automatically invalidate the cache lines, this may not be true for non-temporal write instructions and also not all pages of the object may be updated at any given point of time through this mapping. Having a call to get_pages in set_to_gtt_domain function, as added in the earlier patch 'drm/i915: Broaden application of set-domain(GTT)', would guarantee the clflush and so there will be no cachelines holding the data for the object before it is accessed through this map. The drm_i915_gem_mmap structure (for the DRM_I915_GEM_MMAP_IOCTL) has been extended with a new flags field (defaulting to 0 for existent users). In order for userspace to detect the extended ioctl, a new parameter I915_PARAM_MMAP_VERSION has been added for versioning the ioctl interface. v2: Fix error handling, invalid flag detection, renaming (ickle) v3: Rebase to latest drm-intel-nightly codebase The new mmapping is exercised by igt/gem_mmap_wc, igt/gem_concurrent_blit and igt/gem_gtt_speed. Change-Id: Ie883942f9e689525f72fe9a8d3780c3a9faa769a Signed-off-by: Akash Goel <akash.goel@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-02 18:59:30 +08:00
vma = find_vma(mm, addr);
if (vma)
vma->vm_page_prot =
pgprot_writecombine(vm_get_page_prot(vma->vm_flags));
else
addr = -ENOMEM;
up_write(&mm->mmap_sem);
/* This may race, but that's ok, it only gets set */
WRITE_ONCE(obj->has_wc_mmap, true);
drm/i915: Support creation of unbound wc user mappings for objects This patch provides support to create write-combining virtual mappings of GEM object. It intends to provide the same funtionality of 'mmap_gtt' interface without the constraints and contention of a limited aperture space, but requires clients handles the linear to tile conversion on their own. This is for improving the CPU write operation performance, as with such mapping, writes and reads are almost 50% faster than with mmap_gtt. Similar to the GTT mmapping, unlike the regular CPU mmapping, it avoids the cache flush after update from CPU side, when object is passed onto GPU. This type of mapping is specially useful in case of sub-region update, i.e. when only a portion of the object is to be updated. Using a CPU mmap in such cases would normally incur a clflush of the whole object, and using a GTT mmapping would likely require eviction of an active object or fence and thus stall. The write-combining CPU mmap avoids both. To ensure the cache coherency, before using this mapping, the GTT domain has been reused here. This provides the required cache flush if the object is in CPU domain or synchronization against the concurrent rendering. Although the access through an uncached mmap should automatically invalidate the cache lines, this may not be true for non-temporal write instructions and also not all pages of the object may be updated at any given point of time through this mapping. Having a call to get_pages in set_to_gtt_domain function, as added in the earlier patch 'drm/i915: Broaden application of set-domain(GTT)', would guarantee the clflush and so there will be no cachelines holding the data for the object before it is accessed through this map. The drm_i915_gem_mmap structure (for the DRM_I915_GEM_MMAP_IOCTL) has been extended with a new flags field (defaulting to 0 for existent users). In order for userspace to detect the extended ioctl, a new parameter I915_PARAM_MMAP_VERSION has been added for versioning the ioctl interface. v2: Fix error handling, invalid flag detection, renaming (ickle) v3: Rebase to latest drm-intel-nightly codebase The new mmapping is exercised by igt/gem_mmap_wc, igt/gem_concurrent_blit and igt/gem_gtt_speed. Change-Id: Ie883942f9e689525f72fe9a8d3780c3a9faa769a Signed-off-by: Akash Goel <akash.goel@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-02 18:59:30 +08:00
}
i915_gem_object_put_unlocked(obj);
if (IS_ERR((void *)addr))
return addr;
args->addr_ptr = (uint64_t) addr;
return 0;
}
/**
* i915_gem_fault - fault a page into the GTT
* @vma: VMA in question
* @vmf: fault info
*
* The fault handler is set up by drm_gem_mmap() when a object is GTT mapped
* from userspace. The fault handler takes care of binding the object to
* the GTT (if needed), allocating and programming a fence register (again,
* only if needed based on whether the old reg is still valid or the object
* is tiled) and inserting a new PTE into the faulting process.
*
* Note that the faulting process may involve evicting existing objects
* from the GTT and/or fence registers to make room. So performance may
* suffer if the GTT working set is large or there are few fence registers
* left.
*/
int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
{
struct drm_i915_gem_object *obj = to_intel_bo(vma->vm_private_data);
struct drm_device *dev = obj->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct i915_ggtt *ggtt = &dev_priv->ggtt;
struct i915_ggtt_view view = i915_ggtt_view_normal;
pgoff_t page_offset;
unsigned long pfn;
int ret = 0;
bool write = !!(vmf->flags & FAULT_FLAG_WRITE);
intel_runtime_pm_get(dev_priv);
/* We don't use vmf->pgoff since that has the fake offset */
page_offset = ((unsigned long)vmf->virtual_address - vma->vm_start) >>
PAGE_SHIFT;
ret = i915_mutex_lock_interruptible(dev);
if (ret)
goto out;
trace_i915_gem_object_fault(obj, page_offset, true, write);
drm/i915: Flush GPU rendering with a lockless wait during a pagefault Arjan van de Ven reported that on his test machine that he was seeing stalls of greater than 1 frame greatly impacting the user experience. He tracked this down to being the locked flush during a pagefault as being the culprit hogging the struct_mutex and so blocking any other user from proceeding. Stalling on a pagefault is bad behaviour on userspace's part, for one it means that they are ignoring the coherency rules on pointer access through the GTT, but fortunately we can apply the same trick as the set-to-domain ioctl to do a lightweight, nonblocking flush of outstanding rendering first. "Prior to the patch it looks like this (this one testrun does not show the 20ms+ I've seen occasionally) 4.99 ms 2.36 ms 31360 __wait_seqno i915_wait_seqno i915_gem_object_wait_rendering i915_gem_object_set_to_gtt_domain i915_gem_fault __do_fault handle_ +pte_fault handle_mm_fault __do_page_fault do_page_fault page_fault 4.99 ms 2.75 ms 107751 __wait_seqno i915_gem_wait_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 4.99 ms 1.63 ms 1666 i915_mutex_lock_interruptible i915_gem_fault __do_fault handle_pte_fault handle_mm_fault __do_page_fault do_page_fault page_fa +ult 4.93 ms 2.45 ms 980 i915_mutex_lock_interruptible intel_crtc_page_flip drm_mode_page_flip_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_ +sysret 4.89 ms 2.20 ms 3283 i915_mutex_lock_interruptible i915_gem_wait_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 4.34 ms 1.66 ms 1715 i915_mutex_lock_interruptible i915_gem_pwrite_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 3.73 ms 3.73 ms 49 i915_mutex_lock_interruptible i915_gem_set_domain_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 3.17 ms 0.33 ms 931 i915_mutex_lock_interruptible i915_gem_madvise_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 2.97 ms 0.43 ms 1029 i915_mutex_lock_interruptible i915_gem_busy_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 2.55 ms 0.51 ms 735 i915_gem_get_tiling drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret After the patch it looks like this: 4.99 ms 2.14 ms 22212 __wait_seqno i915_gem_wait_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 4.86 ms 0.99 ms 14170 __wait_seqno i915_gem_object_wait_rendering__nonblocking i915_gem_fault __do_fault handle_pte_fault handle_mm_fault __do_page_ +fault do_page_fault page_fault 3.59 ms 1.31 ms 325 i915_gem_get_tiling drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 3.37 ms 3.37 ms 65 i915_mutex_lock_interruptible i915_gem_wait_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 2.58 ms 2.58 ms 65 i915_mutex_lock_interruptible i915_gem_do_execbuffer.isra.23 i915_gem_execbuffer2 drm_ioctl i915_compat_ioctl compat_sys_ioctl +ia32_sysret 2.19 ms 2.19 ms 65 i915_mutex_lock_interruptible intel_crtc_page_flip drm_mode_page_flip_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_ +sysret 2.18 ms 2.18 ms 65 i915_mutex_lock_interruptible i915_gem_busy_ioctl drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret 1.66 ms 1.66 ms 65 i915_gem_set_tiling drm_ioctl i915_compat_ioctl compat_sys_ioctl ia32_sysret It may not look like it, but this is quite a large difference, and I've been unable to reproduce > 5 msec delays at all, while before they do happen (just not in the trace above)." gem_gtt_hog on an old Pineview (GMA3150), before: 4969.119ms after: 4122.749ms Reported-by: Arjan van de Ven <arjan.van.de.ven@intel.com> Testcase: igt/gem_gtt_hog Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-08 04:37:06 +08:00
/* Try to flush the object off the GPU first without holding the lock.
* Upon reacquiring the lock, we will perform our sanity checks and then
* repeat the flush holding the lock in the normal manner to catch cases
* where we are gazumped.
*/
ret = i915_gem_object_wait_rendering__nonblocking(obj, NULL, !write);
if (ret)
goto unlock;
/* Access to snoopable pages through the GTT is incoherent. */
if (obj->cache_level != I915_CACHE_NONE && !HAS_LLC(dev)) {
ret = -EFAULT;
goto unlock;
}
/* Use a partial view if the object is bigger than the aperture. */
if (obj->base.size >= ggtt->mappable_end &&
obj->tiling_mode == I915_TILING_NONE) {
static const unsigned int chunk_size = 256; // 1 MiB
memset(&view, 0, sizeof(view));
view.type = I915_GGTT_VIEW_PARTIAL;
view.params.partial.offset = rounddown(page_offset, chunk_size);
view.params.partial.size =
min_t(unsigned int,
chunk_size,
(vma->vm_end - vma->vm_start)/PAGE_SIZE -
view.params.partial.offset);
}
/* Now pin it into the GTT if needed */
ret = i915_gem_object_ggtt_pin(obj, &view, 0, PIN_MAPPABLE);
if (ret)
goto unlock;
ret = i915_gem_object_set_to_gtt_domain(obj, write);
if (ret)
goto unpin;
ret = i915_gem_object_get_fence(obj);
if (ret)
goto unpin;
/* Finally, remap it using the new GTT offset */
pfn = ggtt->mappable_base +
i915_gem_obj_ggtt_offset_view(obj, &view);
pfn >>= PAGE_SHIFT;
if (unlikely(view.type == I915_GGTT_VIEW_PARTIAL)) {
/* Overriding existing pages in partial view does not cause
* us any trouble as TLBs are still valid because the fault
* is due to userspace losing part of the mapping or never
* having accessed it before (at this partials' range).
*/
unsigned long base = vma->vm_start +
(view.params.partial.offset << PAGE_SHIFT);
unsigned int i;
for (i = 0; i < view.params.partial.size; i++) {
ret = vm_insert_pfn(vma, base + i * PAGE_SIZE, pfn + i);
if (ret)
break;
}
obj->fault_mappable = true;
} else {
if (!obj->fault_mappable) {
unsigned long size = min_t(unsigned long,
vma->vm_end - vma->vm_start,
obj->base.size);
int i;
for (i = 0; i < size >> PAGE_SHIFT; i++) {
ret = vm_insert_pfn(vma,
(unsigned long)vma->vm_start + i * PAGE_SIZE,
pfn + i);
if (ret)
break;
}
obj->fault_mappable = true;
} else
ret = vm_insert_pfn(vma,
(unsigned long)vmf->virtual_address,
pfn + page_offset);
}
unpin:
i915_gem_object_ggtt_unpin_view(obj, &view);
unlock:
mutex_unlock(&dev->struct_mutex);
out:
switch (ret) {
case -EIO:
/*
* We eat errors when the gpu is terminally wedged to avoid
* userspace unduly crashing (gl has no provisions for mmaps to
* fail). But any other -EIO isn't ours (e.g. swap in failure)
* and so needs to be reported.
*/
if (!i915_terminally_wedged(&dev_priv->gpu_error)) {
ret = VM_FAULT_SIGBUS;
break;
}
case -EAGAIN:
/*
* EAGAIN means the gpu is hung and we'll wait for the error
* handler to reset everything when re-faulting in
* i915_mutex_lock_interruptible.
*/
case 0:
case -ERESTARTSYS:
case -EINTR:
case -EBUSY:
/*
* EBUSY is ok: this just means that another thread
* already did the job.
*/
ret = VM_FAULT_NOPAGE;
break;
case -ENOMEM:
ret = VM_FAULT_OOM;
break;
case -ENOSPC:
case -EFAULT:
ret = VM_FAULT_SIGBUS;
break;
default:
WARN_ONCE(ret, "unhandled error in i915_gem_fault: %i\n", ret);
ret = VM_FAULT_SIGBUS;
break;
}
intel_runtime_pm_put(dev_priv);
return ret;
}
/**
* i915_gem_release_mmap - remove physical page mappings
* @obj: obj in question
*
* Preserve the reservation of the mmapping with the DRM core code, but
* relinquish ownership of the pages back to the system.
*
* It is vital that we remove the page mapping if we have mapped a tiled
* object through the GTT and then lose the fence register due to
* resource pressure. Similarly if the object has been moved out of the
* aperture, than pages mapped into userspace must be revoked. Removing the
* mapping will then trigger a page fault on the next user access, allowing
* fixup by i915_gem_fault().
*/
void
i915_gem_release_mmap(struct drm_i915_gem_object *obj)
{
/* Serialisation between user GTT access and our code depends upon
* revoking the CPU's PTE whilst the mutex is held. The next user
* pagefault then has to wait until we release the mutex.
*/
lockdep_assert_held(&obj->base.dev->struct_mutex);
if (!obj->fault_mappable)
return;
drm_vma_node_unmap(&obj->base.vma_node,
obj->base.dev->anon_inode->i_mapping);
/* Ensure that the CPU's PTE are revoked and there are not outstanding
* memory transactions from userspace before we return. The TLB
* flushing implied above by changing the PTE above *should* be
* sufficient, an extra barrier here just provides us with a bit
* of paranoid documentation about our requirement to serialise
* memory writes before touching registers / GSM.
*/
wmb();
obj->fault_mappable = false;
}
void
i915_gem_release_all_mmaps(struct drm_i915_private *dev_priv)
{
struct drm_i915_gem_object *obj;
list_for_each_entry(obj, &dev_priv->mm.bound_list, global_list)
i915_gem_release_mmap(obj);
}
uint32_t
i915_gem_get_gtt_size(struct drm_device *dev, uint32_t size, int tiling_mode)
{
uint32_t gtt_size;
if (INTEL_INFO(dev)->gen >= 4 ||
tiling_mode == I915_TILING_NONE)
return size;
/* Previous chips need a power-of-two fence region when tiling */
if (IS_GEN3(dev))
gtt_size = 1024*1024;
else
gtt_size = 512*1024;
while (gtt_size < size)
gtt_size <<= 1;
return gtt_size;
}
/**
* i915_gem_get_gtt_alignment - return required GTT alignment for an object
* @dev: drm device
* @size: object size
* @tiling_mode: tiling mode
* @fenced: is fenced alignemned required or not
*
* Return the required GTT alignment for an object, taking into account
* potential fence register mapping.
*/
uint32_t
i915_gem_get_gtt_alignment(struct drm_device *dev, uint32_t size,
int tiling_mode, bool fenced)
{
/*
* Minimum alignment is 4k (GTT page size), but might be greater
* if a fence register is needed for the object.
*/
if (INTEL_INFO(dev)->gen >= 4 || (!fenced && IS_G33(dev)) ||
tiling_mode == I915_TILING_NONE)
return 4096;
/*
* Previous chips need to be aligned to the size of the smallest
* fence register that can contain the object.
*/
return i915_gem_get_gtt_size(dev, size, tiling_mode);
}
static int i915_gem_object_create_mmap_offset(struct drm_i915_gem_object *obj)
{
struct drm_i915_private *dev_priv = to_i915(obj->base.dev);
int ret;
dev_priv->mm.shrinker_no_lock_stealing = true;
ret = drm_gem_create_mmap_offset(&obj->base);
if (ret != -ENOSPC)
goto out;
/* Badly fragmented mmap space? The only way we can recover
* space is by destroying unwanted objects. We can't randomly release
* mmap_offsets as userspace expects them to be persistent for the
* lifetime of the objects. The closest we can is to release the
* offsets on purgeable objects by truncating it and marking it purged,
* which prevents userspace from ever using that object again.
*/
i915_gem_shrink(dev_priv,
obj->base.size >> PAGE_SHIFT,
I915_SHRINK_BOUND |
I915_SHRINK_UNBOUND |
I915_SHRINK_PURGEABLE);
ret = drm_gem_create_mmap_offset(&obj->base);
if (ret != -ENOSPC)
goto out;
i915_gem_shrink_all(dev_priv);
ret = drm_gem_create_mmap_offset(&obj->base);
out:
dev_priv->mm.shrinker_no_lock_stealing = false;
return ret;
}
static void i915_gem_object_free_mmap_offset(struct drm_i915_gem_object *obj)
{
drm_gem_free_mmap_offset(&obj->base);
}
int
i915_gem_mmap_gtt(struct drm_file *file,
struct drm_device *dev,
uint32_t handle,
uint64_t *offset)
{
struct drm_i915_gem_object *obj;
int ret;
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
obj = i915_gem_object_lookup(file, handle);
if (!obj) {
ret = -ENOENT;
goto unlock;
}
if (obj->madv != I915_MADV_WILLNEED) {
DRM_DEBUG("Attempting to mmap a purgeable buffer\n");
ret = -EFAULT;
goto out;
}
ret = i915_gem_object_create_mmap_offset(obj);
if (ret)
goto out;
*offset = drm_vma_node_offset_addr(&obj->base.vma_node);
out:
i915_gem_object_put(obj);
unlock:
mutex_unlock(&dev->struct_mutex);
return ret;
}
/**
* i915_gem_mmap_gtt_ioctl - prepare an object for GTT mmap'ing
* @dev: DRM device
* @data: GTT mapping ioctl data
* @file: GEM object info
*
* Simply returns the fake offset to userspace so it can mmap it.
* The mmap call will end up in drm_gem_mmap(), which will set things
* up so we can get faults in the handler above.
*
* The fault handler will take care of binding the object into the GTT
* (since it may have been evicted to make room for something), allocating
* a fence register, and mapping the appropriate aperture address into
* userspace.
*/
int
i915_gem_mmap_gtt_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_mmap_gtt *args = data;
return i915_gem_mmap_gtt(file, dev, args->handle, &args->offset);
}
/* Immediately discard the backing storage */
static void
i915_gem_object_truncate(struct drm_i915_gem_object *obj)
{
i915_gem_object_free_mmap_offset(obj);
i915: add dmabuf/prime buffer sharing support. This adds handle->fd and fd->handle support to i915, this is to allow for offloading of rendering in one direction and outputs in the other. v2 from Daniel Vetter: - fixup conflicts with the prepare/finish gtt prep work. - implement ppgtt binding support. Note that we have squat i-g-t testcoverage for any of the lifetime and access rules dma_buf/prime support brings along. And there are quite a few intricate situations here. Also note that the integration with the existing code is a bit hackish, especially around get_gtt_pages and put_gtt_pages. It imo would be easier with the prep code from Chris Wilson's unbound series, but that is for 3.6. Also note that I didn't bother to put the new prepare/finish gtt hooks to good use by moving the dma_buf_map/unmap_attachment calls in there (like we've originally planned for). Last but not least this patch is only compile-tested, but I've changed very little compared to Dave Airlie's version. So there's a decent chance v2 on drm-next works as well as v1 on 3.4-rc. v3: Right when I've hit sent I've noticed that I've screwed up one obj->sg_list (for dmar support) and obj->sg_table (for prime support) disdinction. We should be able to merge these 2 paths, but that's material for another patch. v4: fix the error reporting bugs pointed out by ickle. v5: fix another error, and stop non-gtt mmaps on shared objects stop pread/pwrite on imported objects, add fake kmap Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-10 21:25:09 +08:00
if (obj->base.filp == NULL)
return;
/* Our goal here is to return as much of the memory as
* is possible back to the system as we are called from OOM.
* To do this we must instruct the shmfs to drop all of its
* backing pages, *now*.
*/
shmem_truncate_range(file_inode(obj->base.filp), 0, (loff_t)-1);
obj->madv = __I915_MADV_PURGED;
}
/* Try to discard unwanted pages */
static void
i915_gem_object_invalidate(struct drm_i915_gem_object *obj)
{
struct address_space *mapping;
switch (obj->madv) {
case I915_MADV_DONTNEED:
i915_gem_object_truncate(obj);
case __I915_MADV_PURGED:
return;
}
if (obj->base.filp == NULL)
return;
mapping = file_inode(obj->base.filp)->i_mapping,
invalidate_mapping_pages(mapping, 0, (loff_t)-1);
}
static void
i915_gem_object_put_pages_gtt(struct drm_i915_gem_object *obj)
{
struct sgt_iter sgt_iter;
struct page *page;
int ret;
i915: add dmabuf/prime buffer sharing support. This adds handle->fd and fd->handle support to i915, this is to allow for offloading of rendering in one direction and outputs in the other. v2 from Daniel Vetter: - fixup conflicts with the prepare/finish gtt prep work. - implement ppgtt binding support. Note that we have squat i-g-t testcoverage for any of the lifetime and access rules dma_buf/prime support brings along. And there are quite a few intricate situations here. Also note that the integration with the existing code is a bit hackish, especially around get_gtt_pages and put_gtt_pages. It imo would be easier with the prep code from Chris Wilson's unbound series, but that is for 3.6. Also note that I didn't bother to put the new prepare/finish gtt hooks to good use by moving the dma_buf_map/unmap_attachment calls in there (like we've originally planned for). Last but not least this patch is only compile-tested, but I've changed very little compared to Dave Airlie's version. So there's a decent chance v2 on drm-next works as well as v1 on 3.4-rc. v3: Right when I've hit sent I've noticed that I've screwed up one obj->sg_list (for dmar support) and obj->sg_table (for prime support) disdinction. We should be able to merge these 2 paths, but that's material for another patch. v4: fix the error reporting bugs pointed out by ickle. v5: fix another error, and stop non-gtt mmaps on shared objects stop pread/pwrite on imported objects, add fake kmap Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-10 21:25:09 +08:00
BUG_ON(obj->madv == __I915_MADV_PURGED);
drm/i915: Track unbound pages When dealing with a working set larger than the GATT, or even the mappable aperture when touching through the GTT, we end up with evicting objects only to rebind them at a new offset again later. Moving an object into and out of the GTT requires clflushing the pages, thus causing a double-clflush penalty for rebinding. To avoid having to clflush on rebinding, we can track the pages as they are evicted from the GTT and only relinquish those pages on memory pressure. As usual, if it were not for the handling of out-of-memory condition and having to manually shrink our own bo caches, it would be a net reduction of code. Alas. Note: The patch also contains a few changes to the last-hope evict_everything logic in i916_gem_execbuffer.c - we no longer try to only evict the purgeable stuff in a first try (since that's superflous and only helps in OOM corner-cases, not fragmented-gtt trashing situations). Also, the extraction of the get_pages retry loop from bind_to_gtt (and other callsites) to get_pages should imo have been a separate patch. v2: Ditch the newly added put_pages (for unbound objects only) in i915_gem_reset. A quick irc discussion hasn't revealed any important reason for this, so if we need this, I'd like to have a git blame'able explanation for it. v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Split out code movements and rant a bit in the commit message with a few Notes. Done v2] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20 17:40:46 +08:00
ret = i915_gem_object_set_to_cpu_domain(obj, true);
drm/i915: Prevent leaking of -EIO from i915_wait_request() Reporting -EIO from i915_wait_request() has proven very troublematic over the years, with numerous hard-to-reproduce bugs cropping up in the corner case of where a reset occurs and the code wasn't expecting such an error. If the we reset the GPU or have detected a hang and wish to reset the GPU, the request is forcibly complete and the wait broken. Currently, we report either -EAGAIN or -EIO in order for the caller to retreat and restart the wait (if appropriate) after dropping and then reacquiring the struct_mutex (essential to allow the GPU reset to proceed). However, if we take the view that the request is complete (no further work will be done on it by the GPU because it is dead and soon to be reset), then we can proceed with the task at hand and then drop the struct_mutex allowing the reset to occur. This transfers the burden of checking whether it is safe to proceed to the caller, which in all but one instance it is safe - completely eliminating the source of all spurious -EIO. Of note, we only have two API entry points where we expect that userspace can observe an EIO. First is when submitting an execbuf, if the GPU is terminally wedged, then the operation cannot succeed and an -EIO is reported. Secondly, existing userspace uses the throttle ioctl to detect an already wedged GPU before starting using HW acceleration (or to confirm that the GPU is wedged after an error condition). So if the GPU is wedged when the user calls throttle, also report -EIO. v2: Split more carefully the change to i915_wait_request() and assorted ABI from the reset handling. v3: Add a couple of WARN_ON(EIO) to the interruptible modesetting code so that we don't start to leak EIO there in future (and break our hang resistant modesetting). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1460565315-7748-9-git-send-email-chris@chris-wilson.co.uk Link: http://patchwork.freedesktop.org/patch/msgid/1460565315-7748-1-git-send-email-chris@chris-wilson.co.uk
2016-04-14 00:35:08 +08:00
if (WARN_ON(ret)) {
drm/i915: Track unbound pages When dealing with a working set larger than the GATT, or even the mappable aperture when touching through the GTT, we end up with evicting objects only to rebind them at a new offset again later. Moving an object into and out of the GTT requires clflushing the pages, thus causing a double-clflush penalty for rebinding. To avoid having to clflush on rebinding, we can track the pages as they are evicted from the GTT and only relinquish those pages on memory pressure. As usual, if it were not for the handling of out-of-memory condition and having to manually shrink our own bo caches, it would be a net reduction of code. Alas. Note: The patch also contains a few changes to the last-hope evict_everything logic in i916_gem_execbuffer.c - we no longer try to only evict the purgeable stuff in a first try (since that's superflous and only helps in OOM corner-cases, not fragmented-gtt trashing situations). Also, the extraction of the get_pages retry loop from bind_to_gtt (and other callsites) to get_pages should imo have been a separate patch. v2: Ditch the newly added put_pages (for unbound objects only) in i915_gem_reset. A quick irc discussion hasn't revealed any important reason for this, so if we need this, I'd like to have a git blame'able explanation for it. v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Split out code movements and rant a bit in the commit message with a few Notes. Done v2] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20 17:40:46 +08:00
/* In the event of a disaster, abandon all caches and
* hope for the best.
*/
i915_gem_clflush_object(obj, true);
drm/i915: Track unbound pages When dealing with a working set larger than the GATT, or even the mappable aperture when touching through the GTT, we end up with evicting objects only to rebind them at a new offset again later. Moving an object into and out of the GTT requires clflushing the pages, thus causing a double-clflush penalty for rebinding. To avoid having to clflush on rebinding, we can track the pages as they are evicted from the GTT and only relinquish those pages on memory pressure. As usual, if it were not for the handling of out-of-memory condition and having to manually shrink our own bo caches, it would be a net reduction of code. Alas. Note: The patch also contains a few changes to the last-hope evict_everything logic in i916_gem_execbuffer.c - we no longer try to only evict the purgeable stuff in a first try (since that's superflous and only helps in OOM corner-cases, not fragmented-gtt trashing situations). Also, the extraction of the get_pages retry loop from bind_to_gtt (and other callsites) to get_pages should imo have been a separate patch. v2: Ditch the newly added put_pages (for unbound objects only) in i915_gem_reset. A quick irc discussion hasn't revealed any important reason for this, so if we need this, I'd like to have a git blame'able explanation for it. v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Split out code movements and rant a bit in the commit message with a few Notes. Done v2] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20 17:40:46 +08:00
obj->base.read_domains = obj->base.write_domain = I915_GEM_DOMAIN_CPU;
}
drm/i915: avoid leaking DMA mappings We have 3 types of DMA mappings for GEM objects: 1. physically contiguous for stolen and for objects needing contiguous memory 2. DMA-buf mappings imported via a DMA-buf attach operation 3. SG DMA mappings for shmem backed and userptr objects For 1. and 2. the lifetime of the DMA mapping matches the lifetime of the corresponding backing pages and so in practice we create/release the mapping in the object's get_pages/put_pages callback. For 3. the lifetime of the mapping matches that of any existing GPU binding of the object, so we'll create the mapping when the object is bound to the first vma and release the mapping when the object is unbound from its last vma. Since the object can be bound to multiple vmas, we can end up creating a new DMA mapping in the 3. case even if the object already had one. This is not allowed by the DMA API and can lead to leaked mapping data and IOMMU memory space starvation in certain cases. For example HW IOMMU drivers (intel_iommu) allocate a new range from their memory space whenever a mapping is created, silently overriding a pre-existing mapping. Fix this by moving the creation/removal of DMA mappings to the object's get_pages/put_pages callbacks. These callbacks already check for and do an early return in case of any nested calls. This way objects of the 3. case also become more like the other object types. I noticed this issue by enabling DMA debugging, which got disabled after a while due to its internal mapping tables getting full. It also reported errors in connection to random other drivers that did a DMA mapping for an address that was previously mapped by i915 but was never released. Besides these diagnostic messages and the memory space starvation problem for IOMMUs, I'm not aware of this causing a real issue. The fix is based on a patch from Chris. v2: - move the DMA mapping create/remove calls to the get_pages/put_pages callbacks instead of adding new callbacks for these (Chris) v3: - also fix the get_page cache logic on the userptr async path (Chris) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-09 17:59:05 +08:00
i915_gem_gtt_finish_object(obj);
if (i915_gem_object_needs_bit17_swizzle(obj))
i915_gem_object_save_bit_17_swizzle(obj);
if (obj->madv == I915_MADV_DONTNEED)
obj->dirty = 0;
for_each_sgt_page(page, sgt_iter, obj->pages) {
if (obj->dirty)
set_page_dirty(page);
if (obj->madv == I915_MADV_WILLNEED)
mark_page_accessed(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
}
obj->dirty = 0;
sg_free_table(obj->pages);
kfree(obj->pages);
}
drm/i915: Track unbound pages When dealing with a working set larger than the GATT, or even the mappable aperture when touching through the GTT, we end up with evicting objects only to rebind them at a new offset again later. Moving an object into and out of the GTT requires clflushing the pages, thus causing a double-clflush penalty for rebinding. To avoid having to clflush on rebinding, we can track the pages as they are evicted from the GTT and only relinquish those pages on memory pressure. As usual, if it were not for the handling of out-of-memory condition and having to manually shrink our own bo caches, it would be a net reduction of code. Alas. Note: The patch also contains a few changes to the last-hope evict_everything logic in i916_gem_execbuffer.c - we no longer try to only evict the purgeable stuff in a first try (since that's superflous and only helps in OOM corner-cases, not fragmented-gtt trashing situations). Also, the extraction of the get_pages retry loop from bind_to_gtt (and other callsites) to get_pages should imo have been a separate patch. v2: Ditch the newly added put_pages (for unbound objects only) in i915_gem_reset. A quick irc discussion hasn't revealed any important reason for this, so if we need this, I'd like to have a git blame'able explanation for it. v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Split out code movements and rant a bit in the commit message with a few Notes. Done v2] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20 17:40:46 +08:00
int
i915_gem_object_put_pages(struct drm_i915_gem_object *obj)
{
const struct drm_i915_gem_object_ops *ops = obj->ops;
if (obj->pages == NULL)
return 0;
if (obj->pages_pin_count)
return -EBUSY;
GEM_BUG_ON(obj->bind_count);
/* ->put_pages might need to allocate memory for the bit17 swizzle
* array, hence protect them from being reaped by removing them from gtt
* lists early. */
list_del(&obj->global_list);
if (obj->mapping) {
if (is_vmalloc_addr(obj->mapping))
vunmap(obj->mapping);
else
kunmap(kmap_to_page(obj->mapping));
obj->mapping = NULL;
}
ops->put_pages(obj);
obj->pages = NULL;
i915_gem_object_invalidate(obj);
drm/i915: Track unbound pages When dealing with a working set larger than the GATT, or even the mappable aperture when touching through the GTT, we end up with evicting objects only to rebind them at a new offset again later. Moving an object into and out of the GTT requires clflushing the pages, thus causing a double-clflush penalty for rebinding. To avoid having to clflush on rebinding, we can track the pages as they are evicted from the GTT and only relinquish those pages on memory pressure. As usual, if it were not for the handling of out-of-memory condition and having to manually shrink our own bo caches, it would be a net reduction of code. Alas. Note: The patch also contains a few changes to the last-hope evict_everything logic in i916_gem_execbuffer.c - we no longer try to only evict the purgeable stuff in a first try (since that's superflous and only helps in OOM corner-cases, not fragmented-gtt trashing situations). Also, the extraction of the get_pages retry loop from bind_to_gtt (and other callsites) to get_pages should imo have been a separate patch. v2: Ditch the newly added put_pages (for unbound objects only) in i915_gem_reset. A quick irc discussion hasn't revealed any important reason for this, so if we need this, I'd like to have a git blame'able explanation for it. v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Split out code movements and rant a bit in the commit message with a few Notes. Done v2] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20 17:40:46 +08:00
return 0;
}
static int
drm/i915: Track unbound pages When dealing with a working set larger than the GATT, or even the mappable aperture when touching through the GTT, we end up with evicting objects only to rebind them at a new offset again later. Moving an object into and out of the GTT requires clflushing the pages, thus causing a double-clflush penalty for rebinding. To avoid having to clflush on rebinding, we can track the pages as they are evicted from the GTT and only relinquish those pages on memory pressure. As usual, if it were not for the handling of out-of-memory condition and having to manually shrink our own bo caches, it would be a net reduction of code. Alas. Note: The patch also contains a few changes to the last-hope evict_everything logic in i916_gem_execbuffer.c - we no longer try to only evict the purgeable stuff in a first try (since that's superflous and only helps in OOM corner-cases, not fragmented-gtt trashing situations). Also, the extraction of the get_pages retry loop from bind_to_gtt (and other callsites) to get_pages should imo have been a separate patch. v2: Ditch the newly added put_pages (for unbound objects only) in i915_gem_reset. A quick irc discussion hasn't revealed any important reason for this, so if we need this, I'd like to have a git blame'able explanation for it. v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Split out code movements and rant a bit in the commit message with a few Notes. Done v2] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20 17:40:46 +08:00
i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj)
{
struct drm_i915_private *dev_priv = to_i915(obj->base.dev);
int page_count, i;
struct address_space *mapping;
struct sg_table *st;
struct scatterlist *sg;
struct sgt_iter sgt_iter;
struct page *page;
unsigned long last_pfn = 0; /* suppress gcc warning */
drm/i915: avoid leaking DMA mappings We have 3 types of DMA mappings for GEM objects: 1. physically contiguous for stolen and for objects needing contiguous memory 2. DMA-buf mappings imported via a DMA-buf attach operation 3. SG DMA mappings for shmem backed and userptr objects For 1. and 2. the lifetime of the DMA mapping matches the lifetime of the corresponding backing pages and so in practice we create/release the mapping in the object's get_pages/put_pages callback. For 3. the lifetime of the mapping matches that of any existing GPU binding of the object, so we'll create the mapping when the object is bound to the first vma and release the mapping when the object is unbound from its last vma. Since the object can be bound to multiple vmas, we can end up creating a new DMA mapping in the 3. case even if the object already had one. This is not allowed by the DMA API and can lead to leaked mapping data and IOMMU memory space starvation in certain cases. For example HW IOMMU drivers (intel_iommu) allocate a new range from their memory space whenever a mapping is created, silently overriding a pre-existing mapping. Fix this by moving the creation/removal of DMA mappings to the object's get_pages/put_pages callbacks. These callbacks already check for and do an early return in case of any nested calls. This way objects of the 3. case also become more like the other object types. I noticed this issue by enabling DMA debugging, which got disabled after a while due to its internal mapping tables getting full. It also reported errors in connection to random other drivers that did a DMA mapping for an address that was previously mapped by i915 but was never released. Besides these diagnostic messages and the memory space starvation problem for IOMMUs, I'm not aware of this causing a real issue. The fix is based on a patch from Chris. v2: - move the DMA mapping create/remove calls to the get_pages/put_pages callbacks instead of adding new callbacks for these (Chris) v3: - also fix the get_page cache logic on the userptr async path (Chris) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-09 17:59:05 +08:00
int ret;
drm/i915: Track unbound pages When dealing with a working set larger than the GATT, or even the mappable aperture when touching through the GTT, we end up with evicting objects only to rebind them at a new offset again later. Moving an object into and out of the GTT requires clflushing the pages, thus causing a double-clflush penalty for rebinding. To avoid having to clflush on rebinding, we can track the pages as they are evicted from the GTT and only relinquish those pages on memory pressure. As usual, if it were not for the handling of out-of-memory condition and having to manually shrink our own bo caches, it would be a net reduction of code. Alas. Note: The patch also contains a few changes to the last-hope evict_everything logic in i916_gem_execbuffer.c - we no longer try to only evict the purgeable stuff in a first try (since that's superflous and only helps in OOM corner-cases, not fragmented-gtt trashing situations). Also, the extraction of the get_pages retry loop from bind_to_gtt (and other callsites) to get_pages should imo have been a separate patch. v2: Ditch the newly added put_pages (for unbound objects only) in i915_gem_reset. A quick irc discussion hasn't revealed any important reason for this, so if we need this, I'd like to have a git blame'able explanation for it. v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Split out code movements and rant a bit in the commit message with a few Notes. Done v2] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20 17:40:46 +08:00
gfp_t gfp;
drm/i915: Track unbound pages When dealing with a working set larger than the GATT, or even the mappable aperture when touching through the GTT, we end up with evicting objects only to rebind them at a new offset again later. Moving an object into and out of the GTT requires clflushing the pages, thus causing a double-clflush penalty for rebinding. To avoid having to clflush on rebinding, we can track the pages as they are evicted from the GTT and only relinquish those pages on memory pressure. As usual, if it were not for the handling of out-of-memory condition and having to manually shrink our own bo caches, it would be a net reduction of code. Alas. Note: The patch also contains a few changes to the last-hope evict_everything logic in i916_gem_execbuffer.c - we no longer try to only evict the purgeable stuff in a first try (since that's superflous and only helps in OOM corner-cases, not fragmented-gtt trashing situations). Also, the extraction of the get_pages retry loop from bind_to_gtt (and other callsites) to get_pages should imo have been a separate patch. v2: Ditch the newly added put_pages (for unbound objects only) in i915_gem_reset. A quick irc discussion hasn't revealed any important reason for this, so if we need this, I'd like to have a git blame'able explanation for it. v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Split out code movements and rant a bit in the commit message with a few Notes. Done v2] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20 17:40:46 +08:00
/* Assert that the object is not currently in any GPU domain. As it
* wasn't in the GTT, there shouldn't be any way it could have been in
* a GPU cache
*/
BUG_ON(obj->base.read_domains & I915_GEM_GPU_DOMAINS);
BUG_ON(obj->base.write_domain & I915_GEM_GPU_DOMAINS);
st = kmalloc(sizeof(*st), GFP_KERNEL);
if (st == NULL)
return -ENOMEM;
page_count = obj->base.size / PAGE_SIZE;
if (sg_alloc_table(st, page_count, GFP_KERNEL)) {
kfree(st);
return -ENOMEM;
}
/* Get the list of pages out of our struct file. They'll be pinned
* at this point until we release them.
*
* Fail silently without starting the shrinker
*/
mapping = file_inode(obj->base.filp)->i_mapping;
gfp = mapping_gfp_constraint(mapping, ~(__GFP_IO | __GFP_RECLAIM));
mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07 08:28:21 +08:00
gfp |= __GFP_NORETRY | __GFP_NOWARN;
sg = st->sgl;
st->nents = 0;
for (i = 0; i < page_count; i++) {
drm/i915: Track unbound pages When dealing with a working set larger than the GATT, or even the mappable aperture when touching through the GTT, we end up with evicting objects only to rebind them at a new offset again later. Moving an object into and out of the GTT requires clflushing the pages, thus causing a double-clflush penalty for rebinding. To avoid having to clflush on rebinding, we can track the pages as they are evicted from the GTT and only relinquish those pages on memory pressure. As usual, if it were not for the handling of out-of-memory condition and having to manually shrink our own bo caches, it would be a net reduction of code. Alas. Note: The patch also contains a few changes to the last-hope evict_everything logic in i916_gem_execbuffer.c - we no longer try to only evict the purgeable stuff in a first try (since that's superflous and only helps in OOM corner-cases, not fragmented-gtt trashing situations). Also, the extraction of the get_pages retry loop from bind_to_gtt (and other callsites) to get_pages should imo have been a separate patch. v2: Ditch the newly added put_pages (for unbound objects only) in i915_gem_reset. A quick irc discussion hasn't revealed any important reason for this, so if we need this, I'd like to have a git blame'able explanation for it. v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Split out code movements and rant a bit in the commit message with a few Notes. Done v2] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20 17:40:46 +08:00
page = shmem_read_mapping_page_gfp(mapping, i, gfp);
if (IS_ERR(page)) {
i915_gem_shrink(dev_priv,
page_count,
I915_SHRINK_BOUND |
I915_SHRINK_UNBOUND |
I915_SHRINK_PURGEABLE);
drm/i915: Track unbound pages When dealing with a working set larger than the GATT, or even the mappable aperture when touching through the GTT, we end up with evicting objects only to rebind them at a new offset again later. Moving an object into and out of the GTT requires clflushing the pages, thus causing a double-clflush penalty for rebinding. To avoid having to clflush on rebinding, we can track the pages as they are evicted from the GTT and only relinquish those pages on memory pressure. As usual, if it were not for the handling of out-of-memory condition and having to manually shrink our own bo caches, it would be a net reduction of code. Alas. Note: The patch also contains a few changes to the last-hope evict_everything logic in i916_gem_execbuffer.c - we no longer try to only evict the purgeable stuff in a first try (since that's superflous and only helps in OOM corner-cases, not fragmented-gtt trashing situations). Also, the extraction of the get_pages retry loop from bind_to_gtt (and other callsites) to get_pages should imo have been a separate patch. v2: Ditch the newly added put_pages (for unbound objects only) in i915_gem_reset. A quick irc discussion hasn't revealed any important reason for this, so if we need this, I'd like to have a git blame'able explanation for it. v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Split out code movements and rant a bit in the commit message with a few Notes. Done v2] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20 17:40:46 +08:00
page = shmem_read_mapping_page_gfp(mapping, i, gfp);
}
if (IS_ERR(page)) {
/* We've tried hard to allocate the memory by reaping
* our own buffer, now let the real VM do its job and
* go down in flames if truly OOM.
*/
i915_gem_shrink_all(dev_priv);
page = shmem_read_mapping_page(mapping, i);
drm/i915: avoid leaking DMA mappings We have 3 types of DMA mappings for GEM objects: 1. physically contiguous for stolen and for objects needing contiguous memory 2. DMA-buf mappings imported via a DMA-buf attach operation 3. SG DMA mappings for shmem backed and userptr objects For 1. and 2. the lifetime of the DMA mapping matches the lifetime of the corresponding backing pages and so in practice we create/release the mapping in the object's get_pages/put_pages callback. For 3. the lifetime of the mapping matches that of any existing GPU binding of the object, so we'll create the mapping when the object is bound to the first vma and release the mapping when the object is unbound from its last vma. Since the object can be bound to multiple vmas, we can end up creating a new DMA mapping in the 3. case even if the object already had one. This is not allowed by the DMA API and can lead to leaked mapping data and IOMMU memory space starvation in certain cases. For example HW IOMMU drivers (intel_iommu) allocate a new range from their memory space whenever a mapping is created, silently overriding a pre-existing mapping. Fix this by moving the creation/removal of DMA mappings to the object's get_pages/put_pages callbacks. These callbacks already check for and do an early return in case of any nested calls. This way objects of the 3. case also become more like the other object types. I noticed this issue by enabling DMA debugging, which got disabled after a while due to its internal mapping tables getting full. It also reported errors in connection to random other drivers that did a DMA mapping for an address that was previously mapped by i915 but was never released. Besides these diagnostic messages and the memory space starvation problem for IOMMUs, I'm not aware of this causing a real issue. The fix is based on a patch from Chris. v2: - move the DMA mapping create/remove calls to the get_pages/put_pages callbacks instead of adding new callbacks for these (Chris) v3: - also fix the get_page cache logic on the userptr async path (Chris) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-09 17:59:05 +08:00
if (IS_ERR(page)) {
ret = PTR_ERR(page);
drm/i915: Track unbound pages When dealing with a working set larger than the GATT, or even the mappable aperture when touching through the GTT, we end up with evicting objects only to rebind them at a new offset again later. Moving an object into and out of the GTT requires clflushing the pages, thus causing a double-clflush penalty for rebinding. To avoid having to clflush on rebinding, we can track the pages as they are evicted from the GTT and only relinquish those pages on memory pressure. As usual, if it were not for the handling of out-of-memory condition and having to manually shrink our own bo caches, it would be a net reduction of code. Alas. Note: The patch also contains a few changes to the last-hope evict_everything logic in i916_gem_execbuffer.c - we no longer try to only evict the purgeable stuff in a first try (since that's superflous and only helps in OOM corner-cases, not fragmented-gtt trashing situations). Also, the extraction of the get_pages retry loop from bind_to_gtt (and other callsites) to get_pages should imo have been a separate patch. v2: Ditch the newly added put_pages (for unbound objects only) in i915_gem_reset. A quick irc discussion hasn't revealed any important reason for this, so if we need this, I'd like to have a git blame'able explanation for it. v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Split out code movements and rant a bit in the commit message with a few Notes. Done v2] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20 17:40:46 +08:00
goto err_pages;
drm/i915: avoid leaking DMA mappings We have 3 types of DMA mappings for GEM objects: 1. physically contiguous for stolen and for objects needing contiguous memory 2. DMA-buf mappings imported via a DMA-buf attach operation 3. SG DMA mappings for shmem backed and userptr objects For 1. and 2. the lifetime of the DMA mapping matches the lifetime of the corresponding backing pages and so in practice we create/release the mapping in the object's get_pages/put_pages callback. For 3. the lifetime of the mapping matches that of any existing GPU binding of the object, so we'll create the mapping when the object is bound to the first vma and release the mapping when the object is unbound from its last vma. Since the object can be bound to multiple vmas, we can end up creating a new DMA mapping in the 3. case even if the object already had one. This is not allowed by the DMA API and can lead to leaked mapping data and IOMMU memory space starvation in certain cases. For example HW IOMMU drivers (intel_iommu) allocate a new range from their memory space whenever a mapping is created, silently overriding a pre-existing mapping. Fix this by moving the creation/removal of DMA mappings to the object's get_pages/put_pages callbacks. These callbacks already check for and do an early return in case of any nested calls. This way objects of the 3. case also become more like the other object types. I noticed this issue by enabling DMA debugging, which got disabled after a while due to its internal mapping tables getting full. It also reported errors in connection to random other drivers that did a DMA mapping for an address that was previously mapped by i915 but was never released. Besides these diagnostic messages and the memory space starvation problem for IOMMUs, I'm not aware of this causing a real issue. The fix is based on a patch from Chris. v2: - move the DMA mapping create/remove calls to the get_pages/put_pages callbacks instead of adding new callbacks for these (Chris) v3: - also fix the get_page cache logic on the userptr async path (Chris) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-09 17:59:05 +08:00
}
drm/i915: Track unbound pages When dealing with a working set larger than the GATT, or even the mappable aperture when touching through the GTT, we end up with evicting objects only to rebind them at a new offset again later. Moving an object into and out of the GTT requires clflushing the pages, thus causing a double-clflush penalty for rebinding. To avoid having to clflush on rebinding, we can track the pages as they are evicted from the GTT and only relinquish those pages on memory pressure. As usual, if it were not for the handling of out-of-memory condition and having to manually shrink our own bo caches, it would be a net reduction of code. Alas. Note: The patch also contains a few changes to the last-hope evict_everything logic in i916_gem_execbuffer.c - we no longer try to only evict the purgeable stuff in a first try (since that's superflous and only helps in OOM corner-cases, not fragmented-gtt trashing situations). Also, the extraction of the get_pages retry loop from bind_to_gtt (and other callsites) to get_pages should imo have been a separate patch. v2: Ditch the newly added put_pages (for unbound objects only) in i915_gem_reset. A quick irc discussion hasn't revealed any important reason for this, so if we need this, I'd like to have a git blame'able explanation for it. v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Split out code movements and rant a bit in the commit message with a few Notes. Done v2] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20 17:40:46 +08:00
}
drm/i915: make compact dma scatter lists creation work with SWIOTLB backend. Git commit 90797e6d1ec0dfde6ba62a48b9ee3803887d6ed4 ("drm/i915: create compact dma scatter lists for gem objects") makes certain assumptions about the under laying DMA API that are not always correct. On a ThinkPad X230 with an Intel HD 4000 with Xen during the bootup I see: [drm:intel_pipe_set_base] *ERROR* pin & fence failed [drm:intel_crtc_set_config] *ERROR* failed to set mode on [CRTC:3], err = -28 Bit of debugging traced it down to dma_map_sg failing (in i915_gem_gtt_prepare_object) as some of the SG entries were huge (3MB). That unfortunately are sizes that the SWIOTLB is incapable of handling - the maximum it can handle is a an entry of 512KB of virtual contiguous memory for its bounce buffer. (See IO_TLB_SEGSIZE). Previous to the above mention git commit the SG entries were of 4KB, and the code introduced by above git commit squashed the CPU contiguous PFNs in one big virtual address provided to DMA API. This patch is a simple semi-revert - were we emulate the old behavior if we detect that SWIOTLB is online. If it is not online then we continue on with the new compact scatter gather mechanism. An alternative solution would be for the the '.get_pages' and the i915_gem_gtt_prepare_object to retry with smaller max gap of the amount of PFNs that can be combined together - but with this issue discovered during rc7 that might be too risky. Reported-and-Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: Chris Wilson <chris@chris-wilson.co.uk> CC: Imre Deak <imre.deak@intel.com> CC: Daniel Vetter <daniel.vetter@ffwll.ch> CC: David Airlie <airlied@linux.ie> CC: <dri-devel@lists.freedesktop.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-24 23:47:48 +08:00
#ifdef CONFIG_SWIOTLB
if (swiotlb_nr_tbl()) {
st->nents++;
sg_set_page(sg, page, PAGE_SIZE, 0);
sg = sg_next(sg);
continue;
}
#endif
if (!i || page_to_pfn(page) != last_pfn + 1) {
if (i)
sg = sg_next(sg);
st->nents++;
sg_set_page(sg, page, PAGE_SIZE, 0);
} else {
sg->length += PAGE_SIZE;
}
last_pfn = page_to_pfn(page);
/* Check that the i965g/gm workaround works. */
WARN_ON((gfp & __GFP_DMA32) && (last_pfn >= 0x00100000UL));
}
drm/i915: make compact dma scatter lists creation work with SWIOTLB backend. Git commit 90797e6d1ec0dfde6ba62a48b9ee3803887d6ed4 ("drm/i915: create compact dma scatter lists for gem objects") makes certain assumptions about the under laying DMA API that are not always correct. On a ThinkPad X230 with an Intel HD 4000 with Xen during the bootup I see: [drm:intel_pipe_set_base] *ERROR* pin & fence failed [drm:intel_crtc_set_config] *ERROR* failed to set mode on [CRTC:3], err = -28 Bit of debugging traced it down to dma_map_sg failing (in i915_gem_gtt_prepare_object) as some of the SG entries were huge (3MB). That unfortunately are sizes that the SWIOTLB is incapable of handling - the maximum it can handle is a an entry of 512KB of virtual contiguous memory for its bounce buffer. (See IO_TLB_SEGSIZE). Previous to the above mention git commit the SG entries were of 4KB, and the code introduced by above git commit squashed the CPU contiguous PFNs in one big virtual address provided to DMA API. This patch is a simple semi-revert - were we emulate the old behavior if we detect that SWIOTLB is online. If it is not online then we continue on with the new compact scatter gather mechanism. An alternative solution would be for the the '.get_pages' and the i915_gem_gtt_prepare_object to retry with smaller max gap of the amount of PFNs that can be combined together - but with this issue discovered during rc7 that might be too risky. Reported-and-Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: Chris Wilson <chris@chris-wilson.co.uk> CC: Imre Deak <imre.deak@intel.com> CC: Daniel Vetter <daniel.vetter@ffwll.ch> CC: David Airlie <airlied@linux.ie> CC: <dri-devel@lists.freedesktop.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-24 23:47:48 +08:00
#ifdef CONFIG_SWIOTLB
if (!swiotlb_nr_tbl())
#endif
sg_mark_end(sg);
obj->pages = st;
drm/i915: avoid leaking DMA mappings We have 3 types of DMA mappings for GEM objects: 1. physically contiguous for stolen and for objects needing contiguous memory 2. DMA-buf mappings imported via a DMA-buf attach operation 3. SG DMA mappings for shmem backed and userptr objects For 1. and 2. the lifetime of the DMA mapping matches the lifetime of the corresponding backing pages and so in practice we create/release the mapping in the object's get_pages/put_pages callback. For 3. the lifetime of the mapping matches that of any existing GPU binding of the object, so we'll create the mapping when the object is bound to the first vma and release the mapping when the object is unbound from its last vma. Since the object can be bound to multiple vmas, we can end up creating a new DMA mapping in the 3. case even if the object already had one. This is not allowed by the DMA API and can lead to leaked mapping data and IOMMU memory space starvation in certain cases. For example HW IOMMU drivers (intel_iommu) allocate a new range from their memory space whenever a mapping is created, silently overriding a pre-existing mapping. Fix this by moving the creation/removal of DMA mappings to the object's get_pages/put_pages callbacks. These callbacks already check for and do an early return in case of any nested calls. This way objects of the 3. case also become more like the other object types. I noticed this issue by enabling DMA debugging, which got disabled after a while due to its internal mapping tables getting full. It also reported errors in connection to random other drivers that did a DMA mapping for an address that was previously mapped by i915 but was never released. Besides these diagnostic messages and the memory space starvation problem for IOMMUs, I'm not aware of this causing a real issue. The fix is based on a patch from Chris. v2: - move the DMA mapping create/remove calls to the get_pages/put_pages callbacks instead of adding new callbacks for these (Chris) v3: - also fix the get_page cache logic on the userptr async path (Chris) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-09 17:59:05 +08:00
ret = i915_gem_gtt_prepare_object(obj);
if (ret)
goto err_pages;
if (i915_gem_object_needs_bit17_swizzle(obj))
i915_gem_object_do_bit_17_swizzle(obj);
if (obj->tiling_mode != I915_TILING_NONE &&
dev_priv->quirks & QUIRK_PIN_SWIZZLED_PAGES)
i915_gem_object_pin_pages(obj);
return 0;
err_pages:
sg_mark_end(sg);
for_each_sgt_page(page, sgt_iter, st)
put_page(page);
sg_free_table(st);
kfree(st);
/* shmemfs first checks if there is enough memory to allocate the page
* and reports ENOSPC should there be insufficient, along with the usual
* ENOMEM for a genuine allocation failure.
*
* We use ENOSPC in our driver to mean that we have run out of aperture
* space and so want to translate the error from shmemfs back to our
* usual understanding of ENOMEM.
*/
drm/i915: avoid leaking DMA mappings We have 3 types of DMA mappings for GEM objects: 1. physically contiguous for stolen and for objects needing contiguous memory 2. DMA-buf mappings imported via a DMA-buf attach operation 3. SG DMA mappings for shmem backed and userptr objects For 1. and 2. the lifetime of the DMA mapping matches the lifetime of the corresponding backing pages and so in practice we create/release the mapping in the object's get_pages/put_pages callback. For 3. the lifetime of the mapping matches that of any existing GPU binding of the object, so we'll create the mapping when the object is bound to the first vma and release the mapping when the object is unbound from its last vma. Since the object can be bound to multiple vmas, we can end up creating a new DMA mapping in the 3. case even if the object already had one. This is not allowed by the DMA API and can lead to leaked mapping data and IOMMU memory space starvation in certain cases. For example HW IOMMU drivers (intel_iommu) allocate a new range from their memory space whenever a mapping is created, silently overriding a pre-existing mapping. Fix this by moving the creation/removal of DMA mappings to the object's get_pages/put_pages callbacks. These callbacks already check for and do an early return in case of any nested calls. This way objects of the 3. case also become more like the other object types. I noticed this issue by enabling DMA debugging, which got disabled after a while due to its internal mapping tables getting full. It also reported errors in connection to random other drivers that did a DMA mapping for an address that was previously mapped by i915 but was never released. Besides these diagnostic messages and the memory space starvation problem for IOMMUs, I'm not aware of this causing a real issue. The fix is based on a patch from Chris. v2: - move the DMA mapping create/remove calls to the get_pages/put_pages callbacks instead of adding new callbacks for these (Chris) v3: - also fix the get_page cache logic on the userptr async path (Chris) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-09 17:59:05 +08:00
if (ret == -ENOSPC)
ret = -ENOMEM;
return ret;
}
/* Ensure that the associated pages are gathered from the backing storage
* and pinned into our object. i915_gem_object_get_pages() may be called
* multiple times before they are released by a single call to
* i915_gem_object_put_pages() - once the pages are no longer referenced
* either as a result of memory pressure (reaping pages under the shrinker)
* or as the object is itself released.
*/
int
i915_gem_object_get_pages(struct drm_i915_gem_object *obj)
{
struct drm_i915_private *dev_priv = to_i915(obj->base.dev);
const struct drm_i915_gem_object_ops *ops = obj->ops;
int ret;
if (obj->pages)
return 0;
if (obj->madv != I915_MADV_WILLNEED) {
DRM_DEBUG("Attempting to obtain a purgeable object\n");
return -EFAULT;
}
BUG_ON(obj->pages_pin_count);
ret = ops->get_pages(obj);
if (ret)
return ret;
list_add_tail(&obj->global_list, &dev_priv->mm.unbound_list);
obj->get_page.sg = obj->pages->sgl;
obj->get_page.last = 0;
return 0;
}
/* The 'mapping' part of i915_gem_object_pin_map() below */
static void *i915_gem_object_map(const struct drm_i915_gem_object *obj)
{
unsigned long n_pages = obj->base.size >> PAGE_SHIFT;
struct sg_table *sgt = obj->pages;
struct sgt_iter sgt_iter;
struct page *page;
struct page *stack_pages[32];
struct page **pages = stack_pages;
unsigned long i = 0;
void *addr;
/* A single page can always be kmapped */
if (n_pages == 1)
return kmap(sg_page(sgt->sgl));
if (n_pages > ARRAY_SIZE(stack_pages)) {
/* Too big for stack -- allocate temporary array instead */
pages = drm_malloc_gfp(n_pages, sizeof(*pages), GFP_TEMPORARY);
if (!pages)
return NULL;
}
for_each_sgt_page(page, sgt_iter, sgt)
pages[i++] = page;
/* Check that we have the expected number of pages */
GEM_BUG_ON(i != n_pages);
addr = vmap(pages, n_pages, 0, PAGE_KERNEL);
if (pages != stack_pages)
drm_free_large(pages);
return addr;
}
/* get, pin, and map the pages of the object into kernel space */
void *i915_gem_object_pin_map(struct drm_i915_gem_object *obj)
{
int ret;
lockdep_assert_held(&obj->base.dev->struct_mutex);
ret = i915_gem_object_get_pages(obj);
if (ret)
return ERR_PTR(ret);
i915_gem_object_pin_pages(obj);
if (!obj->mapping) {
obj->mapping = i915_gem_object_map(obj);
if (!obj->mapping) {
i915_gem_object_unpin_pages(obj);
return ERR_PTR(-ENOMEM);
}
}
return obj->mapping;
}
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
static void
drm/i915: Refactor activity tracking for requests With the introduction of requests, we amplified the number of atomic refcounted objects we use and update every execbuffer; from none to several references, and a set of references that need to be changed. We also introduced interesting side-effects in the order of retiring requests and objects. Instead of independently tracking the last request for an object, track the active objects for each request. The object will reside in the buffer list of its most recent active request and so we reduce the kref interchange to a list_move. Now retirements are entirely driven by the request, dramatically simplifying activity tracking on the object themselves, and removing the ambiguity between retiring objects and retiring requests. Furthermore with the consolidation of managing the activity tracking centrally, we can look forward to using RCU to enable lockless lookup of the current active requests for an object. In the future, we will be able to query the status or wait upon rendering to an object without even touching the struct_mutex BKL. All told, less code, simpler and faster, and more extensible. v2: Add a typedef for the function pointer for convenience later. v3: Make the noop retirement callback explicit. Allow passing NULL to the init_request_active() which is expanded to a common noop function. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-16-git-send-email-chris@chris-wilson.co.uk
2016-08-04 14:52:35 +08:00
i915_gem_object_retire__write(struct i915_gem_active *active,
struct drm_i915_gem_request *request)
{
drm/i915: Refactor activity tracking for requests With the introduction of requests, we amplified the number of atomic refcounted objects we use and update every execbuffer; from none to several references, and a set of references that need to be changed. We also introduced interesting side-effects in the order of retiring requests and objects. Instead of independently tracking the last request for an object, track the active objects for each request. The object will reside in the buffer list of its most recent active request and so we reduce the kref interchange to a list_move. Now retirements are entirely driven by the request, dramatically simplifying activity tracking on the object themselves, and removing the ambiguity between retiring objects and retiring requests. Furthermore with the consolidation of managing the activity tracking centrally, we can look forward to using RCU to enable lockless lookup of the current active requests for an object. In the future, we will be able to query the status or wait upon rendering to an object without even touching the struct_mutex BKL. All told, less code, simpler and faster, and more extensible. v2: Add a typedef for the function pointer for convenience later. v3: Make the noop retirement callback explicit. Allow passing NULL to the init_request_active() which is expanded to a common noop function. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-16-git-send-email-chris@chris-wilson.co.uk
2016-08-04 14:52:35 +08:00
struct drm_i915_gem_object *obj =
container_of(active, struct drm_i915_gem_object, last_write);
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
intel_fb_obj_flush(obj, true, ORIGIN_CS);
}
static void
drm/i915: Refactor activity tracking for requests With the introduction of requests, we amplified the number of atomic refcounted objects we use and update every execbuffer; from none to several references, and a set of references that need to be changed. We also introduced interesting side-effects in the order of retiring requests and objects. Instead of independently tracking the last request for an object, track the active objects for each request. The object will reside in the buffer list of its most recent active request and so we reduce the kref interchange to a list_move. Now retirements are entirely driven by the request, dramatically simplifying activity tracking on the object themselves, and removing the ambiguity between retiring objects and retiring requests. Furthermore with the consolidation of managing the activity tracking centrally, we can look forward to using RCU to enable lockless lookup of the current active requests for an object. In the future, we will be able to query the status or wait upon rendering to an object without even touching the struct_mutex BKL. All told, less code, simpler and faster, and more extensible. v2: Add a typedef for the function pointer for convenience later. v3: Make the noop retirement callback explicit. Allow passing NULL to the init_request_active() which is expanded to a common noop function. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-16-git-send-email-chris@chris-wilson.co.uk
2016-08-04 14:52:35 +08:00
i915_gem_object_retire__read(struct i915_gem_active *active,
struct drm_i915_gem_request *request)
{
drm/i915: Refactor activity tracking for requests With the introduction of requests, we amplified the number of atomic refcounted objects we use and update every execbuffer; from none to several references, and a set of references that need to be changed. We also introduced interesting side-effects in the order of retiring requests and objects. Instead of independently tracking the last request for an object, track the active objects for each request. The object will reside in the buffer list of its most recent active request and so we reduce the kref interchange to a list_move. Now retirements are entirely driven by the request, dramatically simplifying activity tracking on the object themselves, and removing the ambiguity between retiring objects and retiring requests. Furthermore with the consolidation of managing the activity tracking centrally, we can look forward to using RCU to enable lockless lookup of the current active requests for an object. In the future, we will be able to query the status or wait upon rendering to an object without even touching the struct_mutex BKL. All told, less code, simpler and faster, and more extensible. v2: Add a typedef for the function pointer for convenience later. v3: Make the noop retirement callback explicit. Allow passing NULL to the init_request_active() which is expanded to a common noop function. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-16-git-send-email-chris@chris-wilson.co.uk
2016-08-04 14:52:35 +08:00
int idx = request->engine->id;
struct drm_i915_gem_object *obj =
container_of(active, struct drm_i915_gem_object, last_read[idx]);
drm/i915: Refactor activity tracking for requests With the introduction of requests, we amplified the number of atomic refcounted objects we use and update every execbuffer; from none to several references, and a set of references that need to be changed. We also introduced interesting side-effects in the order of retiring requests and objects. Instead of independently tracking the last request for an object, track the active objects for each request. The object will reside in the buffer list of its most recent active request and so we reduce the kref interchange to a list_move. Now retirements are entirely driven by the request, dramatically simplifying activity tracking on the object themselves, and removing the ambiguity between retiring objects and retiring requests. Furthermore with the consolidation of managing the activity tracking centrally, we can look forward to using RCU to enable lockless lookup of the current active requests for an object. In the future, we will be able to query the status or wait upon rendering to an object without even touching the struct_mutex BKL. All told, less code, simpler and faster, and more extensible. v2: Add a typedef for the function pointer for convenience later. v3: Make the noop retirement callback explicit. Allow passing NULL to the init_request_active() which is expanded to a common noop function. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-16-git-send-email-chris@chris-wilson.co.uk
2016-08-04 14:52:35 +08:00
GEM_BUG_ON((obj->active & (1 << idx)) == 0);
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
obj->active &= ~(1 << idx);
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
if (obj->active)
return;
/* Bump our place on the bound list to keep it roughly in LRU order
* so that we don't steal from recently used but inactive objects
* (unless we are forced to ofc!)
*/
if (obj->bind_count)
list_move_tail(&obj->global_list,
&request->i915->mm.bound_list);
i915_gem_object_put(obj);
}
static bool i915_context_is_banned(const struct i915_gem_context *ctx)
{
unsigned long elapsed;
if (ctx->hang_stats.banned)
return true;
elapsed = get_seconds() - ctx->hang_stats.guilty_ts;
if (ctx->hang_stats.ban_period_seconds &&
elapsed <= ctx->hang_stats.ban_period_seconds) {
DRM_DEBUG("context hanging too fast, banning!\n");
return true;
}
return false;
}
static void i915_set_reset_status(struct i915_gem_context *ctx,
const bool guilty)
{
struct i915_ctx_hang_stats *hs = &ctx->hang_stats;
if (guilty) {
hs->banned = i915_context_is_banned(ctx);
hs->batch_active++;
hs->guilty_ts = get_seconds();
} else {
hs->batch_pending++;
}
}
drm/i915: Rely on accurate request tracking for finding hung batches In the past, it was possible to have multiple batches per request due to a stray signal or ENOMEM. As a result we had to scan each active object (filtered by those having the COMMAND domain) for the one that contained the ACTHD pointer. This was then made more complicated by the introduction of ppgtt, whereby ACTHD then pointed into the address space of the context and so also needed to be taken into account. This is a fairly robust approach (though the implementation is a little fragile and depends upon the per-generation setup, registers and parameters). However, due to the requirements for hangstats, we needed a robust method for associating batches with a particular request and having that we can rely upon it for finding the associated batch object for error capture. If the batch buffer tracking is not robust enough, that should become apparent quite quickly through an erroneous error capture. That should also help to make sure that the runtime reporting to userspace is robust. It also means that we then report the oldest incomplete batch on each ring, which can be useful for determining the state of userspace at the time of a hang. v2: Use i915_gem_find_active_request (Mika) v3: remove check for ring->get_seqno, split long lines (Ben) v4: check that context is available (Chris) checkpatch warnings fixed Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> (v3) Cc: Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (v3) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-25 23:11:23 +08:00
struct drm_i915_gem_request *
i915_gem_find_active_request(struct intel_engine_cs *engine)
{
struct drm_i915_gem_request *request;
/* We are called by the error capture and reset at a random
* point in time. In particular, note that neither is crucially
* ordered with an interrupt. After a hang, the GPU is dead and we
* assume that no more writes can happen (we waited long enough for
* all writes that were in transaction to be flushed) - adding an
* extra delay for a recent interrupt is pointless. Hence, we do
* not need an engine->irq_seqno_barrier() before the seqno reads.
*/
list_for_each_entry(request, &engine->request_list, link) {
if (i915_gem_request_completed(request))
continue;
return request;
}
return NULL;
}
static void i915_gem_reset_engine_status(struct intel_engine_cs *engine)
{
struct drm_i915_gem_request *request;
bool ring_hung;
request = i915_gem_find_active_request(engine);
if (request == NULL)
return;
ring_hung = engine->hangcheck.score >= HANGCHECK_SCORE_RING_HUNG;
i915_set_reset_status(request->ctx, ring_hung);
list_for_each_entry_continue(request, &engine->request_list, link)
i915_set_reset_status(request->ctx, false);
}
static void i915_gem_reset_engine_cleanup(struct intel_engine_cs *engine)
{
struct intel_ring *ring;
/* Mark all pending requests as complete so that any concurrent
* (lockless) lookup doesn't try and wait upon the request as we
* reset it.
*/
intel_engine_init_seqno(engine, engine->last_submitted_seqno);
drm/i915/bdw: Pin the context backing objects to GGTT on-demand Up until now, we have pinned every logical ring context backing object during creation, and left it pinned until destruction. This made my life easier, but it's a harmful thing to do, because we cause fragmentation of the GGTT (and, eventually, we would run out of space). This patch makes the pinning on-demand: the backing objects of the two contexts that are written to the ELSP are pinned right before submission and unpinned once the hardware is done with them. The only context that is still pinned regardless is the global default one, so that the HWS can still be accessed in the same way (ring->status_page). v2: In the early version of this patch, we were pinning the context as we put it into the ELSP: on the one hand, this is very efficient because only a maximum two contexts are pinned at any given time, but on the other hand, we cannot really pin in interrupt time :( v3: Use a mutex rather than atomic_t to protect pin count to avoid races. Do not unpin default context in free_request. v4: Break out pin and unpin into functions. Fix style problems reported by checkpatch v5: Remove unpin_lock as all pinning and unpinning is done with the struct mutex already locked. Add WARN_ONs to make sure this is the case in future. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:10 +08:00
/*
* Clear the execlists queue up before freeing the requests, as those
* are the ones that keep the context and ringbuffer backing objects
* pinned in place.
*/
if (i915.enable_execlists) {
drm/i915: Move execlists irq handler to a bottom half Doing a lot of work in the interrupt handler introduces huge latencies to the system as a whole. Most dramatic effect can be seen by running an all engine stress test like igt/gem_exec_nop/all where, when the kernel config is lean enough, the whole system can be brought into multi-second periods of complete non-interactivty. That can look for example like this: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/u8:3:143] Modules linked in: [redacted for brevity] CPU: 0 PID: 143 Comm: kworker/u8:3 Tainted: G U L 4.5.0-160321+ #183 Hardware name: Intel Corporation Broadwell Client platform/WhiteTip Mountain 1 Workqueue: i915 gen6_pm_rps_work [i915] task: ffff8800aae88000 ti: ffff8800aae90000 task.ti: ffff8800aae90000 RIP: 0010:[<ffffffff8104a3c2>] [<ffffffff8104a3c2>] __do_softirq+0x72/0x1d0 RSP: 0000:ffff88014f403f38 EFLAGS: 00000206 RAX: ffff8800aae94000 RBX: 0000000000000000 RCX: 00000000000006e0 RDX: 0000000000000020 RSI: 0000000004208060 RDI: 0000000000215d80 RBP: ffff88014f403f80 R08: 0000000b1b42c180 R09: 0000000000000022 R10: 0000000000000004 R11: 00000000ffffffff R12: 000000000000a030 R13: 0000000000000082 R14: ffff8800aa4d0080 R15: 0000000000000082 FS: 0000000000000000(0000) GS:ffff88014f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa53b90c000 CR3: 0000000001a0a000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: 042080601b33869f ffff8800aae94000 00000000fffc2678 ffff88010000000a 0000000000000000 000000000000a030 0000000000005302 ffff8800aa4d0080 0000000000000206 ffff88014f403f90 ffffffff8104a716 ffff88014f403fa8 Call Trace: <IRQ> [<ffffffff8104a716>] irq_exit+0x86/0x90 [<ffffffff81031e7d>] smp_apic_timer_interrupt+0x3d/0x50 [<ffffffff814f3eac>] apic_timer_interrupt+0x7c/0x90 <EOI> [<ffffffffa01c5b40>] ? gen8_write64+0x1a0/0x1a0 [i915] [<ffffffff814f2b39>] ? _raw_spin_unlock_irqrestore+0x9/0x20 [<ffffffffa01c5c44>] gen8_write32+0x104/0x1a0 [i915] [<ffffffff8132c6a2>] ? n_tty_receive_buf_common+0x372/0xae0 [<ffffffffa017cc9e>] gen6_set_rps_thresholds+0x1be/0x330 [i915] [<ffffffffa017eaf0>] gen6_set_rps+0x70/0x200 [i915] [<ffffffffa0185375>] intel_set_rps+0x25/0x30 [i915] [<ffffffffa01768fd>] gen6_pm_rps_work+0x10d/0x2e0 [i915] [<ffffffff81063852>] ? finish_task_switch+0x72/0x1c0 [<ffffffff8105ab29>] process_one_work+0x139/0x350 [<ffffffff8105b186>] worker_thread+0x126/0x490 [<ffffffff8105b060>] ? rescuer_thread+0x320/0x320 [<ffffffff8105fa64>] kthread+0xc4/0xe0 [<ffffffff8105f9a0>] ? kthread_create_on_node+0x170/0x170 [<ffffffff814f351f>] ret_from_fork+0x3f/0x70 [<ffffffff8105f9a0>] ? kthread_create_on_node+0x170/0x170 I could not explain, or find a code path, which would explain a +20 second lockup, but from some instrumentation it was apparent the interrupts off proportion of time was between 10-25% under heavy load which is quite bad. When a interrupt "cliff" is reached, which was >~320k irq/s on my machine, the whole system goes into a terrible state of the above described multi-second lockups. By moving the GT interrupt handling to a tasklet in a most simple way, the problem above disappears completely. Testing the effect on sytem-wide latencies using igt/gem_syslatency shows the following before this patch: gem_syslatency: cycles=1532739, latency mean=416531.829us max=2499237us gem_syslatency: cycles=1839434, latency mean=1458099.157us max=4998944us gem_syslatency: cycles=1432570, latency mean=2688.451us max=1201185us gem_syslatency: cycles=1533543, latency mean=416520.499us max=2498886us This shows that the unrelated process is experiencing huge delays in its wake-up latency. After the patch the results look like this: gem_syslatency: cycles=808907, latency mean=53.133us max=1640us gem_syslatency: cycles=862154, latency mean=62.778us max=2117us gem_syslatency: cycles=856039, latency mean=58.079us max=2123us gem_syslatency: cycles=841683, latency mean=56.914us max=1667us Showing a huge improvement in the unrelated process wake-up latency. It also shows an approximate halving in the number of total empty batches submitted during the test. This may not be worrying since the test puts the driver under a very unrealistic load with ncpu threads doing empty batch submission to all GPU engines each. Another benefit compared to the hard-irq handling is that now work on all engines can be dispatched in parallel since we can have up to number of CPUs active tasklets. (While previously a single hard-irq would serially dispatch on one engine after another.) More interesting scenario with regards to throughput is "gem_latency -n 100" which shows 25% better throughput and CPU usage, and 14% better dispatch latencies. I did not find any gains or regressions with Synmark2 or GLbench under light testing. More benchmarking is certainly required. v2: * execlists_lock should be taken as spin_lock_bh when queuing work from userspace now. (Chris Wilson) * uncore.lock must be taken with spin_lock_irq when submitting requests since that now runs from either softirq or process context. v3: * Expanded commit message with more testing data; * converted missed locking sites to _bh; * added execlist_lock comment. (Chris Wilson) v4: * Mention dispatch parallelism in commit. (Chris Wilson) * Do not hold uncore.lock over MMIO reads since the block is already serialised per-engine via the tasklet itself. (Chris Wilson) * intel_lrc_irq_handler should be static. (Chris Wilson) * Cancel/sync the tasklet on GPU reset. (Chris Wilson) * Document and WARN that tasklet cannot be active/pending on engine cleanup. (Chris Wilson/Imre Deak) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Testcase: igt/gem_exec_nop/all Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94350 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1459768316-6670-1-git-send-email-tvrtko.ursulin@linux.intel.com
2016-04-04 19:11:56 +08:00
/* Ensure irq handler finishes or is cancelled. */
tasklet_kill(&engine->irq_tasklet);
intel_execlists_cancel_requests(engine);
drm/i915/bdw: Pin the context backing objects to GGTT on-demand Up until now, we have pinned every logical ring context backing object during creation, and left it pinned until destruction. This made my life easier, but it's a harmful thing to do, because we cause fragmentation of the GGTT (and, eventually, we would run out of space). This patch makes the pinning on-demand: the backing objects of the two contexts that are written to the ELSP are pinned right before submission and unpinned once the hardware is done with them. The only context that is still pinned regardless is the global default one, so that the HWS can still be accessed in the same way (ring->status_page). v2: In the early version of this patch, we were pinning the context as we put it into the ELSP: on the one hand, this is very efficient because only a maximum two contexts are pinned at any given time, but on the other hand, we cannot really pin in interrupt time :( v3: Use a mutex rather than atomic_t to protect pin count to avoid races. Do not unpin default context in free_request. v4: Break out pin and unpin into functions. Fix style problems reported by checkpatch v5: Remove unpin_lock as all pinning and unpinning is done with the struct mutex already locked. Add WARN_ONs to make sure this is the case in future. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:10 +08:00
}
drm/i915/ppgtt: Defer request freeing on reset We need to defer the free request until the object/vma is capable of being freed - or else we have a problem when we try to destroy the context. The exact same issue is described and fixed here: commit e20780439b26ba95aeb29d3e27cd8cc32bc82a4c Author: Ben Widawsky <ben@bwidawsk.net> Date: Fri Dec 6 14:11:22 2013 -0800 drm/i915: Defer request freeing I had this fix previously, but decided not to keep it for some reason I can no longer remember. gem_reset_stats is a really good test at hitting the problem. For the inquisitive: [ 170.516392] ------------[ cut here ]------------ [ 170.517227] WARNING: CPU: 1 PID: 105 at drivers/gpu/drm/drm_mm.c:578 drm_mm_takedown+0x2e/0x30 [drm]() [ 170.518064] Memory manager not clean during takedown. [ 170.518941] CPU: 1 PID: 105 Comm: kworker/1:1 Not tainted 3.13.0-rc4-BEN+ #28 [ 170.519787] Hardware name: Hewlett-Packard HP EliteBook 8470p/179B, BIOS 68ICF Ver. F.02 04/27/2012 [ 170.520662] Call Trace: [ 170.521517] [<ffffffff814f0589>] dump_stack+0x4e/0x7a [ 170.522373] [<ffffffff81049e6d>] warn_slowpath_common+0x7d/0xa0 [ 170.523227] [<ffffffff81049edc>] warn_slowpath_fmt+0x4c/0x50 [ 170.524079] [<ffffffffa06c414e>] drm_mm_takedown+0x2e/0x30 [drm] [ 170.524934] [<ffffffffa07213f3>] gen6_ppgtt_cleanup+0x23/0x110 [i915] [ 170.525777] [<ffffffffa07837ed>] ppgtt_release.part.5+0x24/0x29 [i915] [ 170.526603] [<ffffffffa071aaa5>] i915_gem_context_free+0x195/0x1a0 [i915] [ 170.527423] [<ffffffffa071189d>] i915_gem_free_request+0x9d/0xb0 [i915] [ 170.528247] [<ffffffffa0718af9>] i915_gem_reset+0x1f9/0x3f0 [i915] [ 170.529065] [<ffffffffa0700cce>] i915_reset+0x4e/0x180 [i915] [ 170.529870] [<ffffffffa070829d>] i915_error_work_func+0xcd/0x120 [i915] [ 170.530666] [<ffffffff8106c13a>] process_one_work+0x1fa/0x6d0 [ 170.531453] [<ffffffff8106c0d8>] ? process_one_work+0x198/0x6d0 [ 170.532230] [<ffffffff8106c72b>] worker_thread+0x11b/0x3a0 [ 170.532996] [<ffffffff8106c610>] ? process_one_work+0x6d0/0x6d0 [ 170.533771] [<ffffffff810743ef>] kthread+0xff/0x120 [ 170.534548] [<ffffffff810742f0>] ? insert_kthread_work+0x80/0x80 [ 170.535322] [<ffffffff814f97ac>] ret_from_fork+0x7c/0xb0 [ 170.536089] [<ffffffff810742f0>] ? insert_kthread_work+0x80/0x80 [ 170.536847] ---[ end trace 3d4c12892e42d58f ]--- v2: Whitespace fix. (Chris) Note: This is a bug that only hits the ppgtt topic branch but I've figured that doing the request cleanup in this order is generally the right thing to do. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Add a code comment to clarify what's actually going on since the lifetime rules aroung ppgtt cleanup are ... fuzzy a best atm. Also add a note about why we need this.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-02 02:15:13 +08:00
/*
* We must free the requests after all the corresponding objects have
* been moved off active lists. Which is the same order as the normal
* retire_requests function does. This is important if object hold
* implicit references on things like e.g. ppgtt address spaces through
* the request.
*/
if (!list_empty(&engine->request_list)) {
drm/i915/ppgtt: Defer request freeing on reset We need to defer the free request until the object/vma is capable of being freed - or else we have a problem when we try to destroy the context. The exact same issue is described and fixed here: commit e20780439b26ba95aeb29d3e27cd8cc32bc82a4c Author: Ben Widawsky <ben@bwidawsk.net> Date: Fri Dec 6 14:11:22 2013 -0800 drm/i915: Defer request freeing I had this fix previously, but decided not to keep it for some reason I can no longer remember. gem_reset_stats is a really good test at hitting the problem. For the inquisitive: [ 170.516392] ------------[ cut here ]------------ [ 170.517227] WARNING: CPU: 1 PID: 105 at drivers/gpu/drm/drm_mm.c:578 drm_mm_takedown+0x2e/0x30 [drm]() [ 170.518064] Memory manager not clean during takedown. [ 170.518941] CPU: 1 PID: 105 Comm: kworker/1:1 Not tainted 3.13.0-rc4-BEN+ #28 [ 170.519787] Hardware name: Hewlett-Packard HP EliteBook 8470p/179B, BIOS 68ICF Ver. F.02 04/27/2012 [ 170.520662] Call Trace: [ 170.521517] [<ffffffff814f0589>] dump_stack+0x4e/0x7a [ 170.522373] [<ffffffff81049e6d>] warn_slowpath_common+0x7d/0xa0 [ 170.523227] [<ffffffff81049edc>] warn_slowpath_fmt+0x4c/0x50 [ 170.524079] [<ffffffffa06c414e>] drm_mm_takedown+0x2e/0x30 [drm] [ 170.524934] [<ffffffffa07213f3>] gen6_ppgtt_cleanup+0x23/0x110 [i915] [ 170.525777] [<ffffffffa07837ed>] ppgtt_release.part.5+0x24/0x29 [i915] [ 170.526603] [<ffffffffa071aaa5>] i915_gem_context_free+0x195/0x1a0 [i915] [ 170.527423] [<ffffffffa071189d>] i915_gem_free_request+0x9d/0xb0 [i915] [ 170.528247] [<ffffffffa0718af9>] i915_gem_reset+0x1f9/0x3f0 [i915] [ 170.529065] [<ffffffffa0700cce>] i915_reset+0x4e/0x180 [i915] [ 170.529870] [<ffffffffa070829d>] i915_error_work_func+0xcd/0x120 [i915] [ 170.530666] [<ffffffff8106c13a>] process_one_work+0x1fa/0x6d0 [ 170.531453] [<ffffffff8106c0d8>] ? process_one_work+0x198/0x6d0 [ 170.532230] [<ffffffff8106c72b>] worker_thread+0x11b/0x3a0 [ 170.532996] [<ffffffff8106c610>] ? process_one_work+0x6d0/0x6d0 [ 170.533771] [<ffffffff810743ef>] kthread+0xff/0x120 [ 170.534548] [<ffffffff810742f0>] ? insert_kthread_work+0x80/0x80 [ 170.535322] [<ffffffff814f97ac>] ret_from_fork+0x7c/0xb0 [ 170.536089] [<ffffffff810742f0>] ? insert_kthread_work+0x80/0x80 [ 170.536847] ---[ end trace 3d4c12892e42d58f ]--- v2: Whitespace fix. (Chris) Note: This is a bug that only hits the ppgtt topic branch but I've figured that doing the request cleanup in this order is generally the right thing to do. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Add a code comment to clarify what's actually going on since the lifetime rules aroung ppgtt cleanup are ... fuzzy a best atm. Also add a note about why we need this.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-02 02:15:13 +08:00
struct drm_i915_gem_request *request;
request = list_last_entry(&engine->request_list,
struct drm_i915_gem_request,
link);
drm/i915/ppgtt: Defer request freeing on reset We need to defer the free request until the object/vma is capable of being freed - or else we have a problem when we try to destroy the context. The exact same issue is described and fixed here: commit e20780439b26ba95aeb29d3e27cd8cc32bc82a4c Author: Ben Widawsky <ben@bwidawsk.net> Date: Fri Dec 6 14:11:22 2013 -0800 drm/i915: Defer request freeing I had this fix previously, but decided not to keep it for some reason I can no longer remember. gem_reset_stats is a really good test at hitting the problem. For the inquisitive: [ 170.516392] ------------[ cut here ]------------ [ 170.517227] WARNING: CPU: 1 PID: 105 at drivers/gpu/drm/drm_mm.c:578 drm_mm_takedown+0x2e/0x30 [drm]() [ 170.518064] Memory manager not clean during takedown. [ 170.518941] CPU: 1 PID: 105 Comm: kworker/1:1 Not tainted 3.13.0-rc4-BEN+ #28 [ 170.519787] Hardware name: Hewlett-Packard HP EliteBook 8470p/179B, BIOS 68ICF Ver. F.02 04/27/2012 [ 170.520662] Call Trace: [ 170.521517] [<ffffffff814f0589>] dump_stack+0x4e/0x7a [ 170.522373] [<ffffffff81049e6d>] warn_slowpath_common+0x7d/0xa0 [ 170.523227] [<ffffffff81049edc>] warn_slowpath_fmt+0x4c/0x50 [ 170.524079] [<ffffffffa06c414e>] drm_mm_takedown+0x2e/0x30 [drm] [ 170.524934] [<ffffffffa07213f3>] gen6_ppgtt_cleanup+0x23/0x110 [i915] [ 170.525777] [<ffffffffa07837ed>] ppgtt_release.part.5+0x24/0x29 [i915] [ 170.526603] [<ffffffffa071aaa5>] i915_gem_context_free+0x195/0x1a0 [i915] [ 170.527423] [<ffffffffa071189d>] i915_gem_free_request+0x9d/0xb0 [i915] [ 170.528247] [<ffffffffa0718af9>] i915_gem_reset+0x1f9/0x3f0 [i915] [ 170.529065] [<ffffffffa0700cce>] i915_reset+0x4e/0x180 [i915] [ 170.529870] [<ffffffffa070829d>] i915_error_work_func+0xcd/0x120 [i915] [ 170.530666] [<ffffffff8106c13a>] process_one_work+0x1fa/0x6d0 [ 170.531453] [<ffffffff8106c0d8>] ? process_one_work+0x198/0x6d0 [ 170.532230] [<ffffffff8106c72b>] worker_thread+0x11b/0x3a0 [ 170.532996] [<ffffffff8106c610>] ? process_one_work+0x6d0/0x6d0 [ 170.533771] [<ffffffff810743ef>] kthread+0xff/0x120 [ 170.534548] [<ffffffff810742f0>] ? insert_kthread_work+0x80/0x80 [ 170.535322] [<ffffffff814f97ac>] ret_from_fork+0x7c/0xb0 [ 170.536089] [<ffffffff810742f0>] ? insert_kthread_work+0x80/0x80 [ 170.536847] ---[ end trace 3d4c12892e42d58f ]--- v2: Whitespace fix. (Chris) Note: This is a bug that only hits the ppgtt topic branch but I've figured that doing the request cleanup in this order is generally the right thing to do. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Add a code comment to clarify what's actually going on since the lifetime rules aroung ppgtt cleanup are ... fuzzy a best atm. Also add a note about why we need this.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-02 02:15:13 +08:00
i915_gem_request_retire_upto(request);
drm/i915/ppgtt: Defer request freeing on reset We need to defer the free request until the object/vma is capable of being freed - or else we have a problem when we try to destroy the context. The exact same issue is described and fixed here: commit e20780439b26ba95aeb29d3e27cd8cc32bc82a4c Author: Ben Widawsky <ben@bwidawsk.net> Date: Fri Dec 6 14:11:22 2013 -0800 drm/i915: Defer request freeing I had this fix previously, but decided not to keep it for some reason I can no longer remember. gem_reset_stats is a really good test at hitting the problem. For the inquisitive: [ 170.516392] ------------[ cut here ]------------ [ 170.517227] WARNING: CPU: 1 PID: 105 at drivers/gpu/drm/drm_mm.c:578 drm_mm_takedown+0x2e/0x30 [drm]() [ 170.518064] Memory manager not clean during takedown. [ 170.518941] CPU: 1 PID: 105 Comm: kworker/1:1 Not tainted 3.13.0-rc4-BEN+ #28 [ 170.519787] Hardware name: Hewlett-Packard HP EliteBook 8470p/179B, BIOS 68ICF Ver. F.02 04/27/2012 [ 170.520662] Call Trace: [ 170.521517] [<ffffffff814f0589>] dump_stack+0x4e/0x7a [ 170.522373] [<ffffffff81049e6d>] warn_slowpath_common+0x7d/0xa0 [ 170.523227] [<ffffffff81049edc>] warn_slowpath_fmt+0x4c/0x50 [ 170.524079] [<ffffffffa06c414e>] drm_mm_takedown+0x2e/0x30 [drm] [ 170.524934] [<ffffffffa07213f3>] gen6_ppgtt_cleanup+0x23/0x110 [i915] [ 170.525777] [<ffffffffa07837ed>] ppgtt_release.part.5+0x24/0x29 [i915] [ 170.526603] [<ffffffffa071aaa5>] i915_gem_context_free+0x195/0x1a0 [i915] [ 170.527423] [<ffffffffa071189d>] i915_gem_free_request+0x9d/0xb0 [i915] [ 170.528247] [<ffffffffa0718af9>] i915_gem_reset+0x1f9/0x3f0 [i915] [ 170.529065] [<ffffffffa0700cce>] i915_reset+0x4e/0x180 [i915] [ 170.529870] [<ffffffffa070829d>] i915_error_work_func+0xcd/0x120 [i915] [ 170.530666] [<ffffffff8106c13a>] process_one_work+0x1fa/0x6d0 [ 170.531453] [<ffffffff8106c0d8>] ? process_one_work+0x198/0x6d0 [ 170.532230] [<ffffffff8106c72b>] worker_thread+0x11b/0x3a0 [ 170.532996] [<ffffffff8106c610>] ? process_one_work+0x6d0/0x6d0 [ 170.533771] [<ffffffff810743ef>] kthread+0xff/0x120 [ 170.534548] [<ffffffff810742f0>] ? insert_kthread_work+0x80/0x80 [ 170.535322] [<ffffffff814f97ac>] ret_from_fork+0x7c/0xb0 [ 170.536089] [<ffffffff810742f0>] ? insert_kthread_work+0x80/0x80 [ 170.536847] ---[ end trace 3d4c12892e42d58f ]--- v2: Whitespace fix. (Chris) Note: This is a bug that only hits the ppgtt topic branch but I've figured that doing the request cleanup in this order is generally the right thing to do. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Add a code comment to clarify what's actually going on since the lifetime rules aroung ppgtt cleanup are ... fuzzy a best atm. Also add a note about why we need this.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-02 02:15:13 +08:00
}
/* Having flushed all requests from all queues, we know that all
* ringbuffers must now be empty. However, since we do not reclaim
* all space when retiring the request (to prevent HEADs colliding
* with rapid ringbuffer wraparound) the amount of available space
* upon reset is less than when we start. Do one more pass over
* all the ringbuffers to reset last_retired_head.
*/
list_for_each_entry(ring, &engine->buffers, link) {
ring->last_retired_head = ring->tail;
intel_ring_update_space(ring);
}
engine->i915->gt.active_engines &= ~intel_engine_flag(engine);
}
void i915_gem_reset(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_engine_cs *engine;
/*
* Before we free the objects from the requests, we need to inspect
* them for finding the guilty party. As the requests only borrow
* their reference to the objects, the inspection must be done first.
*/
for_each_engine(engine, dev_priv)
i915_gem_reset_engine_status(engine);
for_each_engine(engine, dev_priv)
i915_gem_reset_engine_cleanup(engine);
mod_delayed_work(dev_priv->wq, &dev_priv->gt.idle_work, 0);
i915_gem_context_reset(dev);
i915_gem_restore_fences(dev);
}
static void
i915_gem_retire_work_handler(struct work_struct *work)
{
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-26 00:34:56 +08:00
struct drm_i915_private *dev_priv =
container_of(work, typeof(*dev_priv), gt.retire_work.work);
struct drm_device *dev = &dev_priv->drm;
/* Come back later if the device is busy... */
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-26 00:34:56 +08:00
if (mutex_trylock(&dev->struct_mutex)) {
i915_gem_retire_requests(dev_priv);
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-26 00:34:56 +08:00
mutex_unlock(&dev->struct_mutex);
}
/* Keep the retire handler running until we are finally idle.
* We do not need to do this test under locking as in the worst-case
* we queue the retire worker once too often.
*/
if (READ_ONCE(dev_priv->gt.awake)) {
i915_queue_hangcheck(dev_priv);
queue_delayed_work(dev_priv->wq,
&dev_priv->gt.retire_work,
round_jiffies_up_relative(HZ));
}
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-26 00:34:56 +08:00
}
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-26 00:34:56 +08:00
static void
i915_gem_idle_work_handler(struct work_struct *work)
{
struct drm_i915_private *dev_priv =
container_of(work, typeof(*dev_priv), gt.idle_work.work);
struct drm_device *dev = &dev_priv->drm;
struct intel_engine_cs *engine;
unsigned int stuck_engines;
bool rearm_hangcheck;
if (!READ_ONCE(dev_priv->gt.awake))
return;
if (READ_ONCE(dev_priv->gt.active_engines))
return;
rearm_hangcheck =
cancel_delayed_work_sync(&dev_priv->gpu_error.hangcheck_work);
if (!mutex_trylock(&dev->struct_mutex)) {
/* Currently busy, come back later */
mod_delayed_work(dev_priv->wq,
&dev_priv->gt.idle_work,
msecs_to_jiffies(50));
goto out_rearm;
}
if (dev_priv->gt.active_engines)
goto out_unlock;
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-26 00:34:56 +08:00
for_each_engine(engine, dev_priv)
i915_gem_batch_pool_fini(&engine->batch_pool);
GEM_BUG_ON(!dev_priv->gt.awake);
dev_priv->gt.awake = false;
rearm_hangcheck = false;
/* As we have disabled hangcheck, we need to unstick any waiters still
* hanging around. However, as we may be racing against the interrupt
* handler or the waiters themselves, we skip enabling the fake-irq.
*/
stuck_engines = intel_kick_waiters(dev_priv);
if (unlikely(stuck_engines))
DRM_DEBUG_DRIVER("kicked stuck waiters (%x)...missed irq?\n",
stuck_engines);
if (INTEL_GEN(dev_priv) >= 6)
gen6_rps_idle(dev_priv);
intel_runtime_pm_put(dev_priv);
out_unlock:
mutex_unlock(&dev->struct_mutex);
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-26 00:34:56 +08:00
out_rearm:
if (rearm_hangcheck) {
GEM_BUG_ON(!dev_priv->gt.awake);
i915_queue_hangcheck(dev_priv);
}
}
void i915_gem_close_object(struct drm_gem_object *gem, struct drm_file *file)
{
struct drm_i915_gem_object *obj = to_intel_bo(gem);
struct drm_i915_file_private *fpriv = file->driver_priv;
struct i915_vma *vma, *vn;
mutex_lock(&obj->base.dev->struct_mutex);
list_for_each_entry_safe(vma, vn, &obj->vma_list, obj_link)
if (vma->vm->file == fpriv)
i915_vma_close(vma);
mutex_unlock(&obj->base.dev->struct_mutex);
}
drm/i915: wait render timeout ioctl This helps implement GL_ARB_sync but stops short of allowing full blown sync objects. Finally we can use the new timed seqno waiting function to allow userspace to wait on a buffer object with a timeout. This implements that interface. The IOCTL will take as input a buffer object handle, and a timeout in nanoseconds (flags is currently optional but will likely be used for permutations of flush operations). Users may specify 0 nanoseconds to instantly check. The wait ioctl with a timeout of 0 reimplements the busy ioctl. With any non-zero timeout parameter the wait ioctl will wait for the given number of nanoseconds on an object becoming unbusy. Since the wait itself does so holding struct_mutex the object may become re-busied before this completes. A similar but shorter race condition exists in the busy ioctl. v2: ETIME/ERESTARTSYS instead of changing to EBUSY, and EGAIN (Chris) Flush the object from the gpu write domain (Chris + Daniel) Fix leaked refcount in good case (Chris) Naturally align ioctl struct (Chris) v3: Drop lock after getting seqno to avoid ugly dance (Chris) v4: check for 0 timeout after olr check to allow polling (Chris) v5: Updated the comment. (Chris) v6: Return -ETIME instead of -EBUSY when timeout_ns is 0 (Daniel) Fix the commit message comment to be less ugly (Ben) Add a warning to check the return timespec (Ben) v7: Use DRM_AUTH for the ioctl. (Eugeni) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-25 06:03:10 +08:00
/**
* i915_gem_wait_ioctl - implements DRM_IOCTL_I915_GEM_WAIT
* @dev: drm device pointer
* @data: ioctl data blob
* @file: drm file pointer
drm/i915: wait render timeout ioctl This helps implement GL_ARB_sync but stops short of allowing full blown sync objects. Finally we can use the new timed seqno waiting function to allow userspace to wait on a buffer object with a timeout. This implements that interface. The IOCTL will take as input a buffer object handle, and a timeout in nanoseconds (flags is currently optional but will likely be used for permutations of flush operations). Users may specify 0 nanoseconds to instantly check. The wait ioctl with a timeout of 0 reimplements the busy ioctl. With any non-zero timeout parameter the wait ioctl will wait for the given number of nanoseconds on an object becoming unbusy. Since the wait itself does so holding struct_mutex the object may become re-busied before this completes. A similar but shorter race condition exists in the busy ioctl. v2: ETIME/ERESTARTSYS instead of changing to EBUSY, and EGAIN (Chris) Flush the object from the gpu write domain (Chris + Daniel) Fix leaked refcount in good case (Chris) Naturally align ioctl struct (Chris) v3: Drop lock after getting seqno to avoid ugly dance (Chris) v4: check for 0 timeout after olr check to allow polling (Chris) v5: Updated the comment. (Chris) v6: Return -ETIME instead of -EBUSY when timeout_ns is 0 (Daniel) Fix the commit message comment to be less ugly (Ben) Add a warning to check the return timespec (Ben) v7: Use DRM_AUTH for the ioctl. (Eugeni) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-25 06:03:10 +08:00
*
* Returns 0 if successful, else an error is returned with the remaining time in
* the timeout parameter.
* -ETIME: object is still busy after timeout
* -ERESTARTSYS: signal interrupted the wait
* -ENONENT: object doesn't exist
* Also possible, but rare:
* -EAGAIN: GPU wedged
* -ENOMEM: damn
* -ENODEV: Internal IRQ fail
* -E?: The add request failed
*
* The wait ioctl with a timeout of 0 reimplements the busy ioctl. With any
* non-zero timeout parameter the wait ioctl will wait for the given number of
* nanoseconds on an object becoming unbusy. Since the wait itself does so
* without holding struct_mutex the object may become re-busied before this
* function completes. A similar but shorter * race condition exists in the busy
* ioctl
*/
int
i915_gem_wait_ioctl(struct drm_device *dev, void *data, struct drm_file *file)
{
struct drm_i915_gem_wait *args = data;
struct drm_i915_gem_object *obj;
struct drm_i915_gem_request *requests[I915_NUM_ENGINES];
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
int i, n = 0;
int ret;
drm/i915: wait render timeout ioctl This helps implement GL_ARB_sync but stops short of allowing full blown sync objects. Finally we can use the new timed seqno waiting function to allow userspace to wait on a buffer object with a timeout. This implements that interface. The IOCTL will take as input a buffer object handle, and a timeout in nanoseconds (flags is currently optional but will likely be used for permutations of flush operations). Users may specify 0 nanoseconds to instantly check. The wait ioctl with a timeout of 0 reimplements the busy ioctl. With any non-zero timeout parameter the wait ioctl will wait for the given number of nanoseconds on an object becoming unbusy. Since the wait itself does so holding struct_mutex the object may become re-busied before this completes. A similar but shorter race condition exists in the busy ioctl. v2: ETIME/ERESTARTSYS instead of changing to EBUSY, and EGAIN (Chris) Flush the object from the gpu write domain (Chris + Daniel) Fix leaked refcount in good case (Chris) Naturally align ioctl struct (Chris) v3: Drop lock after getting seqno to avoid ugly dance (Chris) v4: check for 0 timeout after olr check to allow polling (Chris) v5: Updated the comment. (Chris) v6: Return -ETIME instead of -EBUSY when timeout_ns is 0 (Daniel) Fix the commit message comment to be less ugly (Ben) Add a warning to check the return timespec (Ben) v7: Use DRM_AUTH for the ioctl. (Eugeni) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-25 06:03:10 +08:00
if (args->flags != 0)
return -EINVAL;
drm/i915: wait render timeout ioctl This helps implement GL_ARB_sync but stops short of allowing full blown sync objects. Finally we can use the new timed seqno waiting function to allow userspace to wait on a buffer object with a timeout. This implements that interface. The IOCTL will take as input a buffer object handle, and a timeout in nanoseconds (flags is currently optional but will likely be used for permutations of flush operations). Users may specify 0 nanoseconds to instantly check. The wait ioctl with a timeout of 0 reimplements the busy ioctl. With any non-zero timeout parameter the wait ioctl will wait for the given number of nanoseconds on an object becoming unbusy. Since the wait itself does so holding struct_mutex the object may become re-busied before this completes. A similar but shorter race condition exists in the busy ioctl. v2: ETIME/ERESTARTSYS instead of changing to EBUSY, and EGAIN (Chris) Flush the object from the gpu write domain (Chris + Daniel) Fix leaked refcount in good case (Chris) Naturally align ioctl struct (Chris) v3: Drop lock after getting seqno to avoid ugly dance (Chris) v4: check for 0 timeout after olr check to allow polling (Chris) v5: Updated the comment. (Chris) v6: Return -ETIME instead of -EBUSY when timeout_ns is 0 (Daniel) Fix the commit message comment to be less ugly (Ben) Add a warning to check the return timespec (Ben) v7: Use DRM_AUTH for the ioctl. (Eugeni) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-25 06:03:10 +08:00
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
obj = i915_gem_object_lookup(file, args->bo_handle);
if (!obj) {
drm/i915: wait render timeout ioctl This helps implement GL_ARB_sync but stops short of allowing full blown sync objects. Finally we can use the new timed seqno waiting function to allow userspace to wait on a buffer object with a timeout. This implements that interface. The IOCTL will take as input a buffer object handle, and a timeout in nanoseconds (flags is currently optional but will likely be used for permutations of flush operations). Users may specify 0 nanoseconds to instantly check. The wait ioctl with a timeout of 0 reimplements the busy ioctl. With any non-zero timeout parameter the wait ioctl will wait for the given number of nanoseconds on an object becoming unbusy. Since the wait itself does so holding struct_mutex the object may become re-busied before this completes. A similar but shorter race condition exists in the busy ioctl. v2: ETIME/ERESTARTSYS instead of changing to EBUSY, and EGAIN (Chris) Flush the object from the gpu write domain (Chris + Daniel) Fix leaked refcount in good case (Chris) Naturally align ioctl struct (Chris) v3: Drop lock after getting seqno to avoid ugly dance (Chris) v4: check for 0 timeout after olr check to allow polling (Chris) v5: Updated the comment. (Chris) v6: Return -ETIME instead of -EBUSY when timeout_ns is 0 (Daniel) Fix the commit message comment to be less ugly (Ben) Add a warning to check the return timespec (Ben) v7: Use DRM_AUTH for the ioctl. (Eugeni) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-25 06:03:10 +08:00
mutex_unlock(&dev->struct_mutex);
return -ENOENT;
}
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
if (!obj->active)
goto out;
drm/i915: wait render timeout ioctl This helps implement GL_ARB_sync but stops short of allowing full blown sync objects. Finally we can use the new timed seqno waiting function to allow userspace to wait on a buffer object with a timeout. This implements that interface. The IOCTL will take as input a buffer object handle, and a timeout in nanoseconds (flags is currently optional but will likely be used for permutations of flush operations). Users may specify 0 nanoseconds to instantly check. The wait ioctl with a timeout of 0 reimplements the busy ioctl. With any non-zero timeout parameter the wait ioctl will wait for the given number of nanoseconds on an object becoming unbusy. Since the wait itself does so holding struct_mutex the object may become re-busied before this completes. A similar but shorter race condition exists in the busy ioctl. v2: ETIME/ERESTARTSYS instead of changing to EBUSY, and EGAIN (Chris) Flush the object from the gpu write domain (Chris + Daniel) Fix leaked refcount in good case (Chris) Naturally align ioctl struct (Chris) v3: Drop lock after getting seqno to avoid ugly dance (Chris) v4: check for 0 timeout after olr check to allow polling (Chris) v5: Updated the comment. (Chris) v6: Return -ETIME instead of -EBUSY when timeout_ns is 0 (Daniel) Fix the commit message comment to be less ugly (Ben) Add a warning to check the return timespec (Ben) v7: Use DRM_AUTH for the ioctl. (Eugeni) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-25 06:03:10 +08:00
for (i = 0; i < I915_NUM_ENGINES; i++) {
struct drm_i915_gem_request *req;
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
req = i915_gem_active_get(&obj->last_read[i],
&obj->base.dev->struct_mutex);
if (req)
requests[n++] = req;
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
}
out:
i915_gem_object_put(obj);
drm/i915: wait render timeout ioctl This helps implement GL_ARB_sync but stops short of allowing full blown sync objects. Finally we can use the new timed seqno waiting function to allow userspace to wait on a buffer object with a timeout. This implements that interface. The IOCTL will take as input a buffer object handle, and a timeout in nanoseconds (flags is currently optional but will likely be used for permutations of flush operations). Users may specify 0 nanoseconds to instantly check. The wait ioctl with a timeout of 0 reimplements the busy ioctl. With any non-zero timeout parameter the wait ioctl will wait for the given number of nanoseconds on an object becoming unbusy. Since the wait itself does so holding struct_mutex the object may become re-busied before this completes. A similar but shorter race condition exists in the busy ioctl. v2: ETIME/ERESTARTSYS instead of changing to EBUSY, and EGAIN (Chris) Flush the object from the gpu write domain (Chris + Daniel) Fix leaked refcount in good case (Chris) Naturally align ioctl struct (Chris) v3: Drop lock after getting seqno to avoid ugly dance (Chris) v4: check for 0 timeout after olr check to allow polling (Chris) v5: Updated the comment. (Chris) v6: Return -ETIME instead of -EBUSY when timeout_ns is 0 (Daniel) Fix the commit message comment to be less ugly (Ben) Add a warning to check the return timespec (Ben) v7: Use DRM_AUTH for the ioctl. (Eugeni) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-25 06:03:10 +08:00
mutex_unlock(&dev->struct_mutex);
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
for (i = 0; i < n; i++) {
if (ret == 0)
ret = i915_wait_request(requests[i], true,
args->timeout_ns > 0 ? &args->timeout_ns : NULL,
to_rps_client(file));
i915_gem_request_put(requests[i]);
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
}
return ret;
drm/i915: wait render timeout ioctl This helps implement GL_ARB_sync but stops short of allowing full blown sync objects. Finally we can use the new timed seqno waiting function to allow userspace to wait on a buffer object with a timeout. This implements that interface. The IOCTL will take as input a buffer object handle, and a timeout in nanoseconds (flags is currently optional but will likely be used for permutations of flush operations). Users may specify 0 nanoseconds to instantly check. The wait ioctl with a timeout of 0 reimplements the busy ioctl. With any non-zero timeout parameter the wait ioctl will wait for the given number of nanoseconds on an object becoming unbusy. Since the wait itself does so holding struct_mutex the object may become re-busied before this completes. A similar but shorter race condition exists in the busy ioctl. v2: ETIME/ERESTARTSYS instead of changing to EBUSY, and EGAIN (Chris) Flush the object from the gpu write domain (Chris + Daniel) Fix leaked refcount in good case (Chris) Naturally align ioctl struct (Chris) v3: Drop lock after getting seqno to avoid ugly dance (Chris) v4: check for 0 timeout after olr check to allow polling (Chris) v5: Updated the comment. (Chris) v6: Return -ETIME instead of -EBUSY when timeout_ns is 0 (Daniel) Fix the commit message comment to be less ugly (Ben) Add a warning to check the return timespec (Ben) v7: Use DRM_AUTH for the ioctl. (Eugeni) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-25 06:03:10 +08:00
}
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
static int
drm/i915: Refactor activity tracking for requests With the introduction of requests, we amplified the number of atomic refcounted objects we use and update every execbuffer; from none to several references, and a set of references that need to be changed. We also introduced interesting side-effects in the order of retiring requests and objects. Instead of independently tracking the last request for an object, track the active objects for each request. The object will reside in the buffer list of its most recent active request and so we reduce the kref interchange to a list_move. Now retirements are entirely driven by the request, dramatically simplifying activity tracking on the object themselves, and removing the ambiguity between retiring objects and retiring requests. Furthermore with the consolidation of managing the activity tracking centrally, we can look forward to using RCU to enable lockless lookup of the current active requests for an object. In the future, we will be able to query the status or wait upon rendering to an object without even touching the struct_mutex BKL. All told, less code, simpler and faster, and more extensible. v2: Add a typedef for the function pointer for convenience later. v3: Make the noop retirement callback explicit. Allow passing NULL to the init_request_active() which is expanded to a common noop function. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-16-git-send-email-chris@chris-wilson.co.uk
2016-08-04 14:52:35 +08:00
__i915_gem_object_sync(struct drm_i915_gem_request *to,
struct drm_i915_gem_request *from)
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
{
int ret;
if (to->engine == from->engine)
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
return 0;
if (!i915.semaphores) {
ret = i915_wait_request(from,
from->i915->mm.interruptible,
NULL,
NO_WAITBOOST);
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
if (ret)
return ret;
} else {
int idx = intel_engine_sync_index(from->engine, to->engine);
if (from->fence.seqno <= from->engine->semaphore.sync_seqno[idx])
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
return 0;
trace_i915_gem_ring_sync_to(to, from);
ret = to->engine->semaphore.sync_to(to, from);
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
if (ret)
return ret;
from->engine->semaphore.sync_seqno[idx] = from->fence.seqno;
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
}
return 0;
}
/**
* i915_gem_object_sync - sync an object to a ring.
*
* @obj: object which may be in use on another ring.
* @to: request we are wishing to use
*
* This code is meant to abstract object synchronization with the GPU.
* Conceptually we serialise writes between engines inside the GPU.
* We only allow one engine to write into a buffer at any time, but
* multiple readers. To ensure each has a coherent view of memory, we must:
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
*
* - If there is an outstanding write request to the object, the new
* request must wait for it to complete (either CPU or in hw, requests
* on the same ring will be naturally ordered).
*
* - If we are a write request (pending_write_domain is set), the new
* request must wait for outstanding read requests to complete.
*
* Returns 0 if successful, else propagates up the lower layer error.
*/
int
i915_gem_object_sync(struct drm_i915_gem_object *obj,
struct drm_i915_gem_request *to)
{
struct i915_gem_active *active;
unsigned long active_mask;
int idx;
lockdep_assert_held(&obj->base.dev->struct_mutex);
active_mask = obj->active;
if (!active_mask)
return 0;
if (obj->base.pending_write_domain) {
active = obj->last_read;
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
} else {
active_mask = 1;
active = &obj->last_write;
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
}
for_each_active(active_mask, idx) {
struct drm_i915_gem_request *request;
int ret;
request = i915_gem_active_peek(&active[idx],
&obj->base.dev->struct_mutex);
if (!request)
continue;
drm/i915: Refactor activity tracking for requests With the introduction of requests, we amplified the number of atomic refcounted objects we use and update every execbuffer; from none to several references, and a set of references that need to be changed. We also introduced interesting side-effects in the order of retiring requests and objects. Instead of independently tracking the last request for an object, track the active objects for each request. The object will reside in the buffer list of its most recent active request and so we reduce the kref interchange to a list_move. Now retirements are entirely driven by the request, dramatically simplifying activity tracking on the object themselves, and removing the ambiguity between retiring objects and retiring requests. Furthermore with the consolidation of managing the activity tracking centrally, we can look forward to using RCU to enable lockless lookup of the current active requests for an object. In the future, we will be able to query the status or wait upon rendering to an object without even touching the struct_mutex BKL. All told, less code, simpler and faster, and more extensible. v2: Add a typedef for the function pointer for convenience later. v3: Make the noop retirement callback explicit. Allow passing NULL to the init_request_active() which is expanded to a common noop function. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-16-git-send-email-chris@chris-wilson.co.uk
2016-08-04 14:52:35 +08:00
ret = __i915_gem_object_sync(to, request);
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
if (ret)
return ret;
}
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
return 0;
}
static void i915_gem_object_finish_gtt(struct drm_i915_gem_object *obj)
{
u32 old_write_domain, old_read_domains;
/* Force a pagefault for domain tracking on next user access */
i915_gem_release_mmap(obj);
if ((obj->base.read_domains & I915_GEM_DOMAIN_GTT) == 0)
return;
old_read_domains = obj->base.read_domains;
old_write_domain = obj->base.write_domain;
obj->base.read_domains &= ~I915_GEM_DOMAIN_GTT;
obj->base.write_domain &= ~I915_GEM_DOMAIN_GTT;
trace_i915_gem_object_change_domain(obj,
old_read_domains,
old_write_domain);
}
static void __i915_vma_iounmap(struct i915_vma *vma)
{
GEM_BUG_ON(vma->pin_count);
if (vma->iomap == NULL)
return;
io_mapping_unmap(vma->iomap);
vma->iomap = NULL;
}
drm/i915: Clean up associated VMAs on context destruction Prevent leaking VMAs and PPGTT VMs when objects are imported via flink. Scenario is that any VMAs created by the importer will be left dangling after the importer exits, or destroys the PPGTT context with which they are associated. This is caused by object destruction not running when the importer closes the buffer object handle due the reference held by the exporter. This also leaks the VM since the VMA has a reference on it. In practice these leaks can be observed by stopping and starting the X server on a kernel with fbcon compiled in. Every time X server exits another VMA will be leaked against the fbcon's frame buffer object. Also on systems where flink buffer sharing is used extensively, like Android, this leak has even more serious consequences. This version is takes a general approach from the earlier work by Rafael Barbalho (drm/i915: Clean-up PPGTT on context destruction) and tries to incorporate the subsequent discussion between Chris Wilson and Daniel Vetter. v2: Removed immediate cleanup on object retire - it was causing a recursive VMA unbind via i915_gem_object_wait_rendering. And it is in fact not even needed since by definition context cleanup worker runs only after the last context reference has been dropped, hence all VMAs against the VM belonging to the context are already on the inactive list. v3: Previous version could deadlock since VMA unbind waits on any rendering on an object to complete. Objects can be busy in a different VM which would mean that the cleanup loop would do the wait with the struct mutex held. This is an even simpler approach where we just unbind VMAs without waiting since we know all VMAs belonging to this VM are idle, and there is nothing in flight, at the point context destructor runs. v4: Double underscore prefix for __915_vma_unbind_no_wait and a commit message typo fix. (Michel Thierry) Note that this is just a partial/interim fix since we have a bit a fundamental issue with cleaning up, e.g. https://bugs.freedesktop.org/show_bug.cgi?id=87729 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Testcase: igt/gem_ppgtt.c/flink-and-exit-vma-leak Reviewed-by: Michel Thierry <michel.thierry@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rafael Barbalho <rafael.barbalho@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> [danvet: Add a note that this isn't everything.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-05 20:26:36 +08:00
static int __i915_vma_unbind(struct i915_vma *vma, bool wait)
{
drm/i915: plumb VM into bind/unbind code As alluded to in several patches, and it will be reiterated later... A VMA is an abstraction for a GEM BO bound into an address space. Therefore it stands to reason, that the existing bind, and unbind are the ones which will be the most impacted. This patch implements this, and updates all callers which weren't already updated in the series (because it was too messy). This patch represents the bulk of an earlier, larger patch. I've pulled out a bunch of things by the request of Daniel. The history is preserved for posterity with the email convention of ">" One big change from the original patch aside from a bunch of cropping is I've created an i915_vma_unbind() function. That is because we always have the VMA anyway, and doing an extra lookup is useful. There is a caveat, we retain an i915_gem_object_ggtt_unbind, for the global cases which might not talk in VMAs. > drm/i915: plumb VM into object operations > > This patch was formerly known as: > "drm/i915: Create VMAs (part 3) - plumbing" > > This patch adds a VM argument, bind/unbind, and the object > offset/size/color getters/setters. It preserves the old ggtt helper > functions because things still need, and will continue to need them. > > Some code will still need to be ported over after this. > > v2: Fix purge to pick an object and unbind all vmas > This was doable because of the global bound list change. > > v3: With the commit to actually pin/unpin pages in place, there is no > longer a need to check if unbind succeeded before calling put_pages(). > Make put_pages only BUG() after checking pin count. > > v4: Rebased on top of the new hangcheck work by Mika > plumbed eb_destroy also > Many checkpatch related fixes > > v5: Very large rebase > > v6: > Change BUG_ON to WARN_ON (Daniel) > Rename vm to ggtt in preallocate stolen, since it is always ggtt when > dealing with stolen memory. (Daniel) > list_for_each will short-circuit already (Daniel) > remove superflous space (Daniel) > Use per object list of vmas (Daniel) > Make obj_bound_any() use obj_bound for each vm (Ben) > s/bind_to_gtt/bind_to_vm/ (Ben) > > Fixed up the inactive shrinker. As Daniel noticed the code could > potentially count the same object multiple times. While it's not > possible in the current case, since 1 object can only ever be bound into > 1 address space thus far - we may as well try to get something more > future proof in place now. With a prep patch before this to switch over > to using the bound list + inactive check, we're now able to carry that > forward for every address space an object is bound into. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Rebase on top of the loss of "drm/i915: Cleanup more of VMA in destroy".] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-01 08:00:10 +08:00
struct drm_i915_gem_object *obj = vma->obj;
unsigned long active;
int ret;
/* First wait upon any activity as retiring the request may
* have side-effects such as unpinning or even unbinding this vma.
*/
active = i915_vma_get_active(vma);
if (active && wait) {
int idx;
/* When a closed VMA is retired, it is unbound - eek.
* In order to prevent it from being recursively closed,
* take a pin on the vma so that the second unbind is
* aborted.
*/
vma->pin_count++;
for_each_active(active, idx) {
ret = i915_gem_active_retire(&vma->last_read[idx],
&vma->vm->dev->struct_mutex);
if (ret)
break;
}
vma->pin_count--;
if (ret)
return ret;
GEM_BUG_ON(i915_vma_is_active(vma));
}
if (vma->pin_count)
return -EBUSY;
if (!drm_mm_node_allocated(&vma->node))
goto destroy;
GEM_BUG_ON(obj->bind_count == 0);
GEM_BUG_ON(!obj->pages);
if (vma->is_ggtt && vma->ggtt_view.type == I915_GGTT_VIEW_NORMAL) {
i915_gem_object_finish_gtt(obj);
/* release the fence reg _after_ flushing */
ret = i915_gem_object_put_fence(obj);
if (ret)
return ret;
__i915_vma_iounmap(vma);
}
drm/i915: plumb VM into bind/unbind code As alluded to in several patches, and it will be reiterated later... A VMA is an abstraction for a GEM BO bound into an address space. Therefore it stands to reason, that the existing bind, and unbind are the ones which will be the most impacted. This patch implements this, and updates all callers which weren't already updated in the series (because it was too messy). This patch represents the bulk of an earlier, larger patch. I've pulled out a bunch of things by the request of Daniel. The history is preserved for posterity with the email convention of ">" One big change from the original patch aside from a bunch of cropping is I've created an i915_vma_unbind() function. That is because we always have the VMA anyway, and doing an extra lookup is useful. There is a caveat, we retain an i915_gem_object_ggtt_unbind, for the global cases which might not talk in VMAs. > drm/i915: plumb VM into object operations > > This patch was formerly known as: > "drm/i915: Create VMAs (part 3) - plumbing" > > This patch adds a VM argument, bind/unbind, and the object > offset/size/color getters/setters. It preserves the old ggtt helper > functions because things still need, and will continue to need them. > > Some code will still need to be ported over after this. > > v2: Fix purge to pick an object and unbind all vmas > This was doable because of the global bound list change. > > v3: With the commit to actually pin/unpin pages in place, there is no > longer a need to check if unbind succeeded before calling put_pages(). > Make put_pages only BUG() after checking pin count. > > v4: Rebased on top of the new hangcheck work by Mika > plumbed eb_destroy also > Many checkpatch related fixes > > v5: Very large rebase > > v6: > Change BUG_ON to WARN_ON (Daniel) > Rename vm to ggtt in preallocate stolen, since it is always ggtt when > dealing with stolen memory. (Daniel) > list_for_each will short-circuit already (Daniel) > remove superflous space (Daniel) > Use per object list of vmas (Daniel) > Make obj_bound_any() use obj_bound for each vm (Ben) > s/bind_to_gtt/bind_to_vm/ (Ben) > > Fixed up the inactive shrinker. As Daniel noticed the code could > potentially count the same object multiple times. While it's not > possible in the current case, since 1 object can only ever be bound into > 1 address space thus far - we may as well try to get something more > future proof in place now. With a prep patch before this to switch over > to using the bound list + inactive check, we're now able to carry that > forward for every address space an object is bound into. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Rebase on top of the loss of "drm/i915: Cleanup more of VMA in destroy".] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-01 08:00:10 +08:00
trace_i915_vma_unbind(vma);
vma->vm->unbind_vma(vma);
vma->bound = 0;
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:10:56 +08:00
list_del_init(&vma->vm_link);
if (vma->is_ggtt) {
drm/i915: Infrastructure for supporting different GGTT views per object Things like reliable GGTT mappings and mirrored 2d-on-3d display will need to map objects into the same address space multiple times. Added a GGTT view concept and linked it with the VMA to distinguish between multiple instances per address space. New objects and GEM functions which do not take this new view as a parameter assume the default of zero (I915_GGTT_VIEW_NORMAL) which preserves the previous behaviour. This now means that objects can have multiple VMA entries so the code which assumed there will only be one also had to be modified. Alternative GGTT views are supposed to borrow DMA addresses from obj->pages which is DMA mapped on first VMA instantiation and unmapped on the last one going away. v2: * Removed per view special casing in i915_gem_ggtt_prepare / finish_object in favour of creating and destroying DMA mappings on first VMA instantiation and last VMA destruction. (Daniel Vetter) * Simplified i915_vma_unbind which does not need to count the GGTT views. (Daniel Vetter) * Also moved obj->map_and_fenceable reset under the same check. * Checkpatch cleanups. v3: * Only retire objects once the last VMA is unbound. v4: * Keep scatter-gather table for alternative views persistent for the lifetime of the VMA. * Propagate binding errors to callers and handle appropriately. v5: * Explicitly look for normal GGTT view in i915_gem_obj_bound to align usage in i915_gem_object_ggtt_unpin. (Michel Thierry) * Change to single if statement in i915_gem_obj_to_ggtt. (Michel Thierry) * Removed stray semi-colon in i915_gem_object_set_cache_level. For: VIZ-4544 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Michel Thierry <michel.thierry@intel.com> [danvet: Drop hunk from i915_gem_shrink since it's just prettification but upsets a __must_check warning.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-11 01:27:58 +08:00
if (vma->ggtt_view.type == I915_GGTT_VIEW_NORMAL) {
obj->map_and_fenceable = false;
} else if (vma->ggtt_view.pages) {
sg_free_table(vma->ggtt_view.pages);
kfree(vma->ggtt_view.pages);
}
drm/i915: Always reset vma->ggtt_view.pages cache on unbinding With the introduction of multiple views of an obj in the same vm, each vma was taught to cache its copy of the pages (so that different views could have different page arrangements). However, this missed decoupling those vma->ggtt_view.pages when the vma released its reference on the obj->pages. As we don't always free the vma, this leads to a possible scenario (e.g. execbuffer interrupted by the shrinker) where the vma points to a stale obj->pages, and explodes. Fixes regression from commit fe14d5f4e5468c5b80a24f1a64abcbe116143670 Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Date: Wed Dec 10 17:27:58 2014 +0000 drm/i915: Infrastructure for supporting different GGTT views per object Tvrtko says, if someone else will be confused how this can happen, key is the reservation execbuffer path. That puts the VMA on the exec_list which prevents i915_vma_unbind and i915_gem_vma_destroy from fully destroying the VMA. So the VMA is left existing as an empty object in the list - unbound and disassociated with the backing store. Kind of a cached memory object. And then re-using it needs to clear the cached pages pointer which is fixed above. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1227892 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Michel Thierry <michel.thierry@intel.com> Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [Jani: Added Tvrtko's explanation to commit message.] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-11 15:06:08 +08:00
vma->ggtt_view.pages = NULL;
drm/i915: Infrastructure for supporting different GGTT views per object Things like reliable GGTT mappings and mirrored 2d-on-3d display will need to map objects into the same address space multiple times. Added a GGTT view concept and linked it with the VMA to distinguish between multiple instances per address space. New objects and GEM functions which do not take this new view as a parameter assume the default of zero (I915_GGTT_VIEW_NORMAL) which preserves the previous behaviour. This now means that objects can have multiple VMA entries so the code which assumed there will only be one also had to be modified. Alternative GGTT views are supposed to borrow DMA addresses from obj->pages which is DMA mapped on first VMA instantiation and unmapped on the last one going away. v2: * Removed per view special casing in i915_gem_ggtt_prepare / finish_object in favour of creating and destroying DMA mappings on first VMA instantiation and last VMA destruction. (Daniel Vetter) * Simplified i915_vma_unbind which does not need to count the GGTT views. (Daniel Vetter) * Also moved obj->map_and_fenceable reset under the same check. * Checkpatch cleanups. v3: * Only retire objects once the last VMA is unbound. v4: * Keep scatter-gather table for alternative views persistent for the lifetime of the VMA. * Propagate binding errors to callers and handle appropriately. v5: * Explicitly look for normal GGTT view in i915_gem_obj_bound to align usage in i915_gem_object_ggtt_unpin. (Michel Thierry) * Change to single if statement in i915_gem_obj_to_ggtt. (Michel Thierry) * Removed stray semi-colon in i915_gem_object_set_cache_level. For: VIZ-4544 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Michel Thierry <michel.thierry@intel.com> [danvet: Drop hunk from i915_gem_shrink since it's just prettification but upsets a __must_check warning.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-11 01:27:58 +08:00
}
drm_mm_remove_node(&vma->node);
/* Since the unbound list is global, only move to that list if
drm/i915: More vma fixups around unbind/destroy The important bugfix here is that we must not unlink the vma when we keep it around as a placeholder for the execbuf code. Since then we won't find it again when execbuf gets interrupt and restarted and create a 2nd vma. And since the code as-is isn't fit yet to deal with more than one vma, hilarity ensues. Specifically the dma map/unmap of the sg table isn't adjusted for multiple vmas yet and will blow up like this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffffa008fb37>] i915_gem_gtt_finish_object+0x73/0xc8 [i915] PGD 56bb5067 PUD ad3dd067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: tcp_lp ppdev parport_pc lp parport ipv6 dm_mod dcdbas snd_hda_codec_hdmi pcspkr snd_hda_codec_realtek serio_raw i2c_i801 iTCO_wdt iTCO_vendor_support snd_hda_intel snd_hda_codec lpc_ich snd_hwdep mfd_core snd_pcm snd_page_alloc snd_timer snd soundcore acpi_cpufreq i915 video button drm_kms_helper drm mperf freq_table CPU: 1 PID: 16650 Comm: fbo-maxsize Not tainted 3.11.0-rc4_nightlytop_d93f59_debug_20130814_+ #6957 Hardware name: Dell Inc. OptiPlex 9010/03JR84, BIOS A01 05/04/2012 task: ffff8800563b3f00 ti: ffff88004bdf4000 task.ti: ffff88004bdf4000 RIP: 0010:[<ffffffffa008fb37>] [<ffffffffa008fb37>] i915_gem_gtt_finish_object+0x73/0xc8 [i915] RSP: 0018:ffff88004bdf5958 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8801135e0000 RCX: ffff8800ad3bf8e0 RDX: ffff8800ad3bf8e0 RSI: 0000000000000000 RDI: ffff8801007ee780 RBP: ffff88004bdf5978 R08: ffff8800ad3bf8e0 R09: 0000000000000000 R10: ffffffff86ca1810 R11: ffff880036a17101 R12: ffff8801007ee780 R13: 0000000000018001 R14: ffff880118c4e000 R15: ffff8801007ee780 FS: 00007f401a0ce740(0000) GS:ffff88011e280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000005635c000 CR4: 00000000001407e0 Stack: ffff8801007ee780 ffff88005c253180 0000000000018000 ffff8801135e0000 ffff88004bdf59a8 ffffffffa0088e55 0000000000000011 ffff8801007eec00 0000000000018000 ffff880036a17101 ffff88004bdf5a08 ffffffffa0089026 Call Trace: [<ffffffffa0088e55>] i915_vma_unbind+0xdf/0x1ab [i915] [<ffffffffa0089026>] __i915_gem_shrink+0x105/0x177 [i915] [<ffffffffa0089452>] i915_gem_object_get_pages_gtt+0x108/0x309 [i915] [<ffffffffa0085ba9>] i915_gem_object_get_pages+0x61/0x90 [i915] [<ffffffffa008f22b>] ? gen6_ppgtt_insert_entries+0x103/0x125 [i915] [<ffffffffa008a113>] i915_gem_object_pin+0x1fa/0x5df [i915] [<ffffffffa008cdfe>] i915_gem_execbuffer_reserve_object.isra.6+0x8d/0x1bc [i915] [<ffffffffa008d156>] i915_gem_execbuffer_reserve+0x229/0x367 [i915] [<ffffffffa008dbf6>] i915_gem_do_execbuffer.isra.12+0x4dc/0xf3a [i915] [<ffffffff810fc823>] ? might_fault+0x40/0x90 [<ffffffffa008eb89>] i915_gem_execbuffer2+0x187/0x222 [i915] [<ffffffffa000971c>] drm_ioctl+0x308/0x442 [drm] [<ffffffffa008ea02>] ? i915_gem_execbuffer+0x3ae/0x3ae [i915] [<ffffffff817db156>] ? __do_page_fault+0x3dd/0x481 [<ffffffff8112fdba>] vfs_ioctl+0x26/0x39 [<ffffffff811306a2>] do_vfs_ioctl+0x40e/0x451 [<ffffffff817deda7>] ? sysret_check+0x1b/0x56 [<ffffffff8113073c>] SyS_ioctl+0x57/0x87 [<ffffffff8135bbfe>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff817ded82>] system_call_fastpath+0x16/0x1b Code: 48 c7 c6 84 30 0e a0 31 c0 e8 d0 e9 f7 ff bf c6 a7 00 00 e8 07 af 2c e1 41 f6 84 24 03 01 00 00 10 75 44 49 8b 84 24 08 01 00 00 <8b> 50 08 48 8b 30 49 8b 86 b0 04 00 00 48 89 c7 48 81 c7 98 00 RIP [<ffffffffa008fb37>] i915_gem_gtt_finish_object+0x73/0xc8 [i915] RSP <ffff88004bdf5958> CR2: 0000000000000008 As a consequence we need to change the "only one vma for now" check in vma_unbind - since vma_destroy isn't always called the obj->vma_list might not be empty. Instead check that the vma list is singular at the beginning of vma_unbind. This is also more symmetric with bind_to_vm. This fixes the igt/gem_evict_everything|alignment testcases. v2: - Add a paranoid WARN to mark_free in the eviction code to make sure we never try to evict a vma used by the execbuf code right now. - Move the check for a temporary execbuf vma into vma_destroy - otherwise the failure path cleanup in bind_to_vm will blow up. Our first attempting at fixing this was commit 1be81a2f2cfd8789a627401d470423358fba2d76 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Aug 20 12:56:40 2013 +0100 drm/i915: Don't destroy the vma placeholder during execbuffer reservation Squash with this when merging! v3: Improvements suggested in Chris' review: - Move the WARN_ON in vma_destroy that checks for vmas with an drm_mm allocation before the early return. - Bail out if we hit the WARN in mark_free to hopefully make the kernel survive for long enough to capture it. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <ben@bwidawsk.net> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68298 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68171 Tested-by: lu hua <huax.lu@intel.com> (v2) Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-26 17:23:47 +08:00
* no more VMAs exist. */
if (--obj->bind_count == 0)
list_move_tail(&obj->global_list,
&to_i915(obj->base.dev)->mm.unbound_list);
/* And finally now the object is completely decoupled from this vma,
* we can drop its hold on the backing storage and allow it to be
* reaped by the shrinker.
*/
i915_gem_object_unpin_pages(obj);
destroy:
if (unlikely(vma->closed))
i915_vma_destroy(vma);
return 0;
}
drm/i915: Clean up associated VMAs on context destruction Prevent leaking VMAs and PPGTT VMs when objects are imported via flink. Scenario is that any VMAs created by the importer will be left dangling after the importer exits, or destroys the PPGTT context with which they are associated. This is caused by object destruction not running when the importer closes the buffer object handle due the reference held by the exporter. This also leaks the VM since the VMA has a reference on it. In practice these leaks can be observed by stopping and starting the X server on a kernel with fbcon compiled in. Every time X server exits another VMA will be leaked against the fbcon's frame buffer object. Also on systems where flink buffer sharing is used extensively, like Android, this leak has even more serious consequences. This version is takes a general approach from the earlier work by Rafael Barbalho (drm/i915: Clean-up PPGTT on context destruction) and tries to incorporate the subsequent discussion between Chris Wilson and Daniel Vetter. v2: Removed immediate cleanup on object retire - it was causing a recursive VMA unbind via i915_gem_object_wait_rendering. And it is in fact not even needed since by definition context cleanup worker runs only after the last context reference has been dropped, hence all VMAs against the VM belonging to the context are already on the inactive list. v3: Previous version could deadlock since VMA unbind waits on any rendering on an object to complete. Objects can be busy in a different VM which would mean that the cleanup loop would do the wait with the struct mutex held. This is an even simpler approach where we just unbind VMAs without waiting since we know all VMAs belonging to this VM are idle, and there is nothing in flight, at the point context destructor runs. v4: Double underscore prefix for __915_vma_unbind_no_wait and a commit message typo fix. (Michel Thierry) Note that this is just a partial/interim fix since we have a bit a fundamental issue with cleaning up, e.g. https://bugs.freedesktop.org/show_bug.cgi?id=87729 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Testcase: igt/gem_ppgtt.c/flink-and-exit-vma-leak Reviewed-by: Michel Thierry <michel.thierry@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rafael Barbalho <rafael.barbalho@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> [danvet: Add a note that this isn't everything.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-05 20:26:36 +08:00
int i915_vma_unbind(struct i915_vma *vma)
{
return __i915_vma_unbind(vma, true);
}
int __i915_vma_unbind_no_wait(struct i915_vma *vma)
{
return __i915_vma_unbind(vma, false);
}
int i915_gem_wait_for_idle(struct drm_i915_private *dev_priv)
{
struct intel_engine_cs *engine;
int ret;
lockdep_assert_held(&dev_priv->drm.struct_mutex);
for_each_engine(engine, dev_priv) {
if (engine->last_context == NULL)
continue;
ret = intel_engine_idle(engine);
if (ret)
return ret;
}
return 0;
}
static bool i915_gem_valid_gtt_space(struct i915_vma *vma,
unsigned long cache_level)
{
struct drm_mm_node *gtt_space = &vma->node;
struct drm_mm_node *other;
/*
* On some machines we have to be careful when putting differing types
* of snoopable memory together to avoid the prefetcher crossing memory
* domains and dying. During vm initialisation, we decide whether or not
* these constraints apply and set the drm_mm.color_adjust
* appropriately.
*/
if (vma->vm->mm.color_adjust == NULL)
return true;
if (!drm_mm_node_allocated(gtt_space))
return true;
if (list_empty(&gtt_space->node_list))
return true;
other = list_entry(gtt_space->node_list.prev, struct drm_mm_node, node_list);
if (other->allocated && !other->hole_follows && other->color != cache_level)
return false;
other = list_entry(gtt_space->node_list.next, struct drm_mm_node, node_list);
if (other->allocated && !gtt_space->hole_follows && other->color != cache_level)
return false;
return true;
}
/**
* Finds free space in the GTT aperture and binds the object or a view of it
* there.
* @obj: object to bind
* @vm: address space to bind into
* @ggtt_view: global gtt view if applicable
* @alignment: requested alignment
* @flags: mask of PIN_* flags to use
*/
static struct i915_vma *
drm/i915: plumb VM into bind/unbind code As alluded to in several patches, and it will be reiterated later... A VMA is an abstraction for a GEM BO bound into an address space. Therefore it stands to reason, that the existing bind, and unbind are the ones which will be the most impacted. This patch implements this, and updates all callers which weren't already updated in the series (because it was too messy). This patch represents the bulk of an earlier, larger patch. I've pulled out a bunch of things by the request of Daniel. The history is preserved for posterity with the email convention of ">" One big change from the original patch aside from a bunch of cropping is I've created an i915_vma_unbind() function. That is because we always have the VMA anyway, and doing an extra lookup is useful. There is a caveat, we retain an i915_gem_object_ggtt_unbind, for the global cases which might not talk in VMAs. > drm/i915: plumb VM into object operations > > This patch was formerly known as: > "drm/i915: Create VMAs (part 3) - plumbing" > > This patch adds a VM argument, bind/unbind, and the object > offset/size/color getters/setters. It preserves the old ggtt helper > functions because things still need, and will continue to need them. > > Some code will still need to be ported over after this. > > v2: Fix purge to pick an object and unbind all vmas > This was doable because of the global bound list change. > > v3: With the commit to actually pin/unpin pages in place, there is no > longer a need to check if unbind succeeded before calling put_pages(). > Make put_pages only BUG() after checking pin count. > > v4: Rebased on top of the new hangcheck work by Mika > plumbed eb_destroy also > Many checkpatch related fixes > > v5: Very large rebase > > v6: > Change BUG_ON to WARN_ON (Daniel) > Rename vm to ggtt in preallocate stolen, since it is always ggtt when > dealing with stolen memory. (Daniel) > list_for_each will short-circuit already (Daniel) > remove superflous space (Daniel) > Use per object list of vmas (Daniel) > Make obj_bound_any() use obj_bound for each vm (Ben) > s/bind_to_gtt/bind_to_vm/ (Ben) > > Fixed up the inactive shrinker. As Daniel noticed the code could > potentially count the same object multiple times. While it's not > possible in the current case, since 1 object can only ever be bound into > 1 address space thus far - we may as well try to get something more > future proof in place now. With a prep patch before this to switch over > to using the bound list + inactive check, we're now able to carry that > forward for every address space an object is bound into. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Rebase on top of the loss of "drm/i915: Cleanup more of VMA in destroy".] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-01 08:00:10 +08:00
i915_gem_object_bind_to_vm(struct drm_i915_gem_object *obj,
struct i915_address_space *vm,
const struct i915_ggtt_view *ggtt_view,
drm/i915: plumb VM into bind/unbind code As alluded to in several patches, and it will be reiterated later... A VMA is an abstraction for a GEM BO bound into an address space. Therefore it stands to reason, that the existing bind, and unbind are the ones which will be the most impacted. This patch implements this, and updates all callers which weren't already updated in the series (because it was too messy). This patch represents the bulk of an earlier, larger patch. I've pulled out a bunch of things by the request of Daniel. The history is preserved for posterity with the email convention of ">" One big change from the original patch aside from a bunch of cropping is I've created an i915_vma_unbind() function. That is because we always have the VMA anyway, and doing an extra lookup is useful. There is a caveat, we retain an i915_gem_object_ggtt_unbind, for the global cases which might not talk in VMAs. > drm/i915: plumb VM into object operations > > This patch was formerly known as: > "drm/i915: Create VMAs (part 3) - plumbing" > > This patch adds a VM argument, bind/unbind, and the object > offset/size/color getters/setters. It preserves the old ggtt helper > functions because things still need, and will continue to need them. > > Some code will still need to be ported over after this. > > v2: Fix purge to pick an object and unbind all vmas > This was doable because of the global bound list change. > > v3: With the commit to actually pin/unpin pages in place, there is no > longer a need to check if unbind succeeded before calling put_pages(). > Make put_pages only BUG() after checking pin count. > > v4: Rebased on top of the new hangcheck work by Mika > plumbed eb_destroy also > Many checkpatch related fixes > > v5: Very large rebase > > v6: > Change BUG_ON to WARN_ON (Daniel) > Rename vm to ggtt in preallocate stolen, since it is always ggtt when > dealing with stolen memory. (Daniel) > list_for_each will short-circuit already (Daniel) > remove superflous space (Daniel) > Use per object list of vmas (Daniel) > Make obj_bound_any() use obj_bound for each vm (Ben) > s/bind_to_gtt/bind_to_vm/ (Ben) > > Fixed up the inactive shrinker. As Daniel noticed the code could > potentially count the same object multiple times. While it's not > possible in the current case, since 1 object can only ever be bound into > 1 address space thus far - we may as well try to get something more > future proof in place now. With a prep patch before this to switch over > to using the bound list + inactive check, we're now able to carry that > forward for every address space an object is bound into. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Rebase on top of the loss of "drm/i915: Cleanup more of VMA in destroy".] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-01 08:00:10 +08:00
unsigned alignment,
uint64_t flags)
{
struct drm_device *dev = obj->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct i915_ggtt *ggtt = &dev_priv->ggtt;
u32 fence_alignment, unfenced_alignment;
drm/i915: Wa32bitGeneralStateOffset & Wa32bitInstructionBaseOffset There are some allocations that must be only referenced by 32-bit offsets. To limit the chances of having the first 4GB already full, objects not requiring this workaround use DRM_MM_SEARCH_BELOW/ DRM_MM_CREATE_TOP flags In specific, any resource used with flat/heapless (0x00000000-0xfffff000) General State Heap (GSH) or Instruction State Heap (ISH) must be in a 32-bit range, because the General State Offset and Instruction State Offset are limited to 32-bits. Objects must have EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag to indicate if they can be allocated above the 32-bit address range. To limit the chances of having the first 4GB already full, objects will use DRM_MM_SEARCH_BELOW + DRM_MM_CREATE_TOP flags when possible. The libdrm user of the EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag is here: http://lists.freedesktop.org/archives/intel-gfx/2015-September/075836.html v2: Changed flag logic from neeeds_32b, to supports_48b. v3: Moved 48-bit support flag back to exec_object. (Chris, Daniel) v4: Split pin flags into PIN_ZONE_4G and PIN_HIGH; update PIN_OFFSET_MASK to use last PIN_ defined instead of hard-coded value; use correct limit check in eb_vma_misplaced. (Chris) v5: Don't touch PIN_OFFSET_MASK and update workaround comment (Chris) v6: Apply pin-high for ggtt too (Chris) v7: Handle simultaneous pin-high and pin-mappable end correctly (Akash) Fix check for entries currently using +4GB addresses, use min_t and other polish in object_bind_to_vm (Chris) v8: Commit message updated to point to libdrm patch. v9: vmas are allocated in the correct ozone, so only check flag when the vma has not been allocated. (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v4) Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-01 20:33:57 +08:00
u32 search_flag, alloc_flag;
u64 start, end;
u64 size, fence_size;
struct i915_vma *vma;
int ret;
if (i915_is_ggtt(vm)) {
u32 view_size;
if (WARN_ON(!ggtt_view))
return ERR_PTR(-EINVAL);
view_size = i915_ggtt_view_size(obj, ggtt_view);
fence_size = i915_gem_get_gtt_size(dev,
view_size,
obj->tiling_mode);
fence_alignment = i915_gem_get_gtt_alignment(dev,
view_size,
obj->tiling_mode,
true);
unfenced_alignment = i915_gem_get_gtt_alignment(dev,
view_size,
obj->tiling_mode,
false);
size = flags & PIN_MAPPABLE ? fence_size : view_size;
} else {
fence_size = i915_gem_get_gtt_size(dev,
obj->base.size,
obj->tiling_mode);
fence_alignment = i915_gem_get_gtt_alignment(dev,
obj->base.size,
obj->tiling_mode,
true);
unfenced_alignment =
i915_gem_get_gtt_alignment(dev,
obj->base.size,
obj->tiling_mode,
false);
size = flags & PIN_MAPPABLE ? fence_size : obj->base.size;
}
drm/i915: Wa32bitGeneralStateOffset & Wa32bitInstructionBaseOffset There are some allocations that must be only referenced by 32-bit offsets. To limit the chances of having the first 4GB already full, objects not requiring this workaround use DRM_MM_SEARCH_BELOW/ DRM_MM_CREATE_TOP flags In specific, any resource used with flat/heapless (0x00000000-0xfffff000) General State Heap (GSH) or Instruction State Heap (ISH) must be in a 32-bit range, because the General State Offset and Instruction State Offset are limited to 32-bits. Objects must have EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag to indicate if they can be allocated above the 32-bit address range. To limit the chances of having the first 4GB already full, objects will use DRM_MM_SEARCH_BELOW + DRM_MM_CREATE_TOP flags when possible. The libdrm user of the EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag is here: http://lists.freedesktop.org/archives/intel-gfx/2015-September/075836.html v2: Changed flag logic from neeeds_32b, to supports_48b. v3: Moved 48-bit support flag back to exec_object. (Chris, Daniel) v4: Split pin flags into PIN_ZONE_4G and PIN_HIGH; update PIN_OFFSET_MASK to use last PIN_ defined instead of hard-coded value; use correct limit check in eb_vma_misplaced. (Chris) v5: Don't touch PIN_OFFSET_MASK and update workaround comment (Chris) v6: Apply pin-high for ggtt too (Chris) v7: Handle simultaneous pin-high and pin-mappable end correctly (Akash) Fix check for entries currently using +4GB addresses, use min_t and other polish in object_bind_to_vm (Chris) v8: Commit message updated to point to libdrm patch. v9: vmas are allocated in the correct ozone, so only check flag when the vma has not been allocated. (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v4) Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-01 20:33:57 +08:00
start = flags & PIN_OFFSET_BIAS ? flags & PIN_OFFSET_MASK : 0;
end = vm->total;
if (flags & PIN_MAPPABLE)
end = min_t(u64, end, ggtt->mappable_end);
drm/i915: Wa32bitGeneralStateOffset & Wa32bitInstructionBaseOffset There are some allocations that must be only referenced by 32-bit offsets. To limit the chances of having the first 4GB already full, objects not requiring this workaround use DRM_MM_SEARCH_BELOW/ DRM_MM_CREATE_TOP flags In specific, any resource used with flat/heapless (0x00000000-0xfffff000) General State Heap (GSH) or Instruction State Heap (ISH) must be in a 32-bit range, because the General State Offset and Instruction State Offset are limited to 32-bits. Objects must have EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag to indicate if they can be allocated above the 32-bit address range. To limit the chances of having the first 4GB already full, objects will use DRM_MM_SEARCH_BELOW + DRM_MM_CREATE_TOP flags when possible. The libdrm user of the EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag is here: http://lists.freedesktop.org/archives/intel-gfx/2015-September/075836.html v2: Changed flag logic from neeeds_32b, to supports_48b. v3: Moved 48-bit support flag back to exec_object. (Chris, Daniel) v4: Split pin flags into PIN_ZONE_4G and PIN_HIGH; update PIN_OFFSET_MASK to use last PIN_ defined instead of hard-coded value; use correct limit check in eb_vma_misplaced. (Chris) v5: Don't touch PIN_OFFSET_MASK and update workaround comment (Chris) v6: Apply pin-high for ggtt too (Chris) v7: Handle simultaneous pin-high and pin-mappable end correctly (Akash) Fix check for entries currently using +4GB addresses, use min_t and other polish in object_bind_to_vm (Chris) v8: Commit message updated to point to libdrm patch. v9: vmas are allocated in the correct ozone, so only check flag when the vma has not been allocated. (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v4) Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-01 20:33:57 +08:00
if (flags & PIN_ZONE_4G)
end = min_t(u64, end, (1ULL << 32) - PAGE_SIZE);
drm/i915: Wa32bitGeneralStateOffset & Wa32bitInstructionBaseOffset There are some allocations that must be only referenced by 32-bit offsets. To limit the chances of having the first 4GB already full, objects not requiring this workaround use DRM_MM_SEARCH_BELOW/ DRM_MM_CREATE_TOP flags In specific, any resource used with flat/heapless (0x00000000-0xfffff000) General State Heap (GSH) or Instruction State Heap (ISH) must be in a 32-bit range, because the General State Offset and Instruction State Offset are limited to 32-bits. Objects must have EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag to indicate if they can be allocated above the 32-bit address range. To limit the chances of having the first 4GB already full, objects will use DRM_MM_SEARCH_BELOW + DRM_MM_CREATE_TOP flags when possible. The libdrm user of the EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag is here: http://lists.freedesktop.org/archives/intel-gfx/2015-September/075836.html v2: Changed flag logic from neeeds_32b, to supports_48b. v3: Moved 48-bit support flag back to exec_object. (Chris, Daniel) v4: Split pin flags into PIN_ZONE_4G and PIN_HIGH; update PIN_OFFSET_MASK to use last PIN_ defined instead of hard-coded value; use correct limit check in eb_vma_misplaced. (Chris) v5: Don't touch PIN_OFFSET_MASK and update workaround comment (Chris) v6: Apply pin-high for ggtt too (Chris) v7: Handle simultaneous pin-high and pin-mappable end correctly (Akash) Fix check for entries currently using +4GB addresses, use min_t and other polish in object_bind_to_vm (Chris) v8: Commit message updated to point to libdrm patch. v9: vmas are allocated in the correct ozone, so only check flag when the vma has not been allocated. (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v4) Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-01 20:33:57 +08:00
if (alignment == 0)
alignment = flags & PIN_MAPPABLE ? fence_alignment :
unfenced_alignment;
if (flags & PIN_MAPPABLE && alignment & (fence_alignment - 1)) {
DRM_DEBUG("Invalid object (view type=%u) alignment requested %u\n",
ggtt_view ? ggtt_view->type : 0,
alignment);
return ERR_PTR(-EINVAL);
}
/* If binding the object/GGTT view requires more space than the entire
* aperture has, reject it early before evicting everything in a vain
* attempt to find space.
*/
if (size > end) {
DRM_DEBUG("Attempting to bind an object (view type=%u) larger than the aperture: size=%llu > %s aperture=%llu\n",
ggtt_view ? ggtt_view->type : 0,
size,
flags & PIN_MAPPABLE ? "mappable" : "total",
drm/i915: Prevent negative relocation deltas from wrapping This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-23 14:48:08 +08:00
end);
return ERR_PTR(-E2BIG);
}
ret = i915_gem_object_get_pages(obj);
drm/i915: Track unbound pages When dealing with a working set larger than the GATT, or even the mappable aperture when touching through the GTT, we end up with evicting objects only to rebind them at a new offset again later. Moving an object into and out of the GTT requires clflushing the pages, thus causing a double-clflush penalty for rebinding. To avoid having to clflush on rebinding, we can track the pages as they are evicted from the GTT and only relinquish those pages on memory pressure. As usual, if it were not for the handling of out-of-memory condition and having to manually shrink our own bo caches, it would be a net reduction of code. Alas. Note: The patch also contains a few changes to the last-hope evict_everything logic in i916_gem_execbuffer.c - we no longer try to only evict the purgeable stuff in a first try (since that's superflous and only helps in OOM corner-cases, not fragmented-gtt trashing situations). Also, the extraction of the get_pages retry loop from bind_to_gtt (and other callsites) to get_pages should imo have been a separate patch. v2: Ditch the newly added put_pages (for unbound objects only) in i915_gem_reset. A quick irc discussion hasn't revealed any important reason for this, so if we need this, I'd like to have a git blame'able explanation for it. v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Split out code movements and rant a bit in the commit message with a few Notes. Done v2] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20 17:40:46 +08:00
if (ret)
return ERR_PTR(ret);
drm/i915: Track unbound pages When dealing with a working set larger than the GATT, or even the mappable aperture when touching through the GTT, we end up with evicting objects only to rebind them at a new offset again later. Moving an object into and out of the GTT requires clflushing the pages, thus causing a double-clflush penalty for rebinding. To avoid having to clflush on rebinding, we can track the pages as they are evicted from the GTT and only relinquish those pages on memory pressure. As usual, if it were not for the handling of out-of-memory condition and having to manually shrink our own bo caches, it would be a net reduction of code. Alas. Note: The patch also contains a few changes to the last-hope evict_everything logic in i916_gem_execbuffer.c - we no longer try to only evict the purgeable stuff in a first try (since that's superflous and only helps in OOM corner-cases, not fragmented-gtt trashing situations). Also, the extraction of the get_pages retry loop from bind_to_gtt (and other callsites) to get_pages should imo have been a separate patch. v2: Ditch the newly added put_pages (for unbound objects only) in i915_gem_reset. A quick irc discussion hasn't revealed any important reason for this, so if we need this, I'd like to have a git blame'able explanation for it. v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Split out code movements and rant a bit in the commit message with a few Notes. Done v2] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20 17:40:46 +08:00
i915_gem_object_pin_pages(obj);
vma = ggtt_view ? i915_gem_obj_lookup_or_create_ggtt_vma(obj, ggtt_view) :
i915_gem_obj_lookup_or_create_vma(obj, vm);
if (IS_ERR(vma))
goto err_unpin;
drm/i915: Add soft-pinning API for execbuffer Userspace can pass in an offset that it presumes the object is located at. The kernel will then do its utmost to fit the object into that location. The assumption is that userspace is handling its own object locations (for example along with full-ppgtt) and that the kernel will rarely have to make space for the user's requests. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> v2: Fixed incorrect eviction found by Michal Winiarski - fix suggested by Chris Wilson. Fixed incorrect error paths causing crash found by Michal Winiarski. (Not published externally) v3: Rebased because of trivial conflict in object_bind_to_vm. Fixed eviction to allow eviction of soft-pinned objects when another soft-pinned object used by a subsequent execbuffer overlaps reported by Michal Winiarski. (Not published externally) v4: Moved soft-pinned objects to the front of ordered_vmas so that they are pinned first after an address conflict happens to avoid repeated conflicts in rare cases (Suggested by Chris Wilson). Expanded comment on drm_i915_gem_exec_object2.offset to cover this new API. v5: Added I915_PARAM_HAS_EXEC_SOFTPIN parameter for detecting this capability (Kristian). Added check for multiple pinnings on eviction (Akash). Made sure buffers are not considered misplaced without the user specifying EXEC_OBJECT_SUPPORTS_48B_ADDRESS. User must assume responsibility for any addressing workarounds. Updated object2.offset field comment again to clarify NO_RELOC case (Chris). checkpatch cleanup. v6: Trivial rebase on latest drm-intel-nightly v7: Catch attempts to pin above the max virtual address size and return EINVAL (Tvrtko). Decouple EXEC_OBJECT_SUPPORTS_48B_ADDRESS and EXEC_OBJECT_PINNED flags, user must pass both flags in any attempt to pin something at an offset above 4GB (Chris, Daniel Vetter). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Akash Goel <akash.goel@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Zou Nanhai <nanhai.zou@intel.com> Cc: Kristian Høgsberg <hoegsberg@gmail.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Acked-by: PDT Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449575707-20933-1-git-send-email-thomas.daniel@intel.com
2015-12-08 19:55:07 +08:00
if (flags & PIN_OFFSET_FIXED) {
uint64_t offset = flags & PIN_OFFSET_MASK;
if (offset & (alignment - 1) || offset + size > end) {
ret = -EINVAL;
goto err_vma;
drm/i915: Add soft-pinning API for execbuffer Userspace can pass in an offset that it presumes the object is located at. The kernel will then do its utmost to fit the object into that location. The assumption is that userspace is handling its own object locations (for example along with full-ppgtt) and that the kernel will rarely have to make space for the user's requests. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> v2: Fixed incorrect eviction found by Michal Winiarski - fix suggested by Chris Wilson. Fixed incorrect error paths causing crash found by Michal Winiarski. (Not published externally) v3: Rebased because of trivial conflict in object_bind_to_vm. Fixed eviction to allow eviction of soft-pinned objects when another soft-pinned object used by a subsequent execbuffer overlaps reported by Michal Winiarski. (Not published externally) v4: Moved soft-pinned objects to the front of ordered_vmas so that they are pinned first after an address conflict happens to avoid repeated conflicts in rare cases (Suggested by Chris Wilson). Expanded comment on drm_i915_gem_exec_object2.offset to cover this new API. v5: Added I915_PARAM_HAS_EXEC_SOFTPIN parameter for detecting this capability (Kristian). Added check for multiple pinnings on eviction (Akash). Made sure buffers are not considered misplaced without the user specifying EXEC_OBJECT_SUPPORTS_48B_ADDRESS. User must assume responsibility for any addressing workarounds. Updated object2.offset field comment again to clarify NO_RELOC case (Chris). checkpatch cleanup. v6: Trivial rebase on latest drm-intel-nightly v7: Catch attempts to pin above the max virtual address size and return EINVAL (Tvrtko). Decouple EXEC_OBJECT_SUPPORTS_48B_ADDRESS and EXEC_OBJECT_PINNED flags, user must pass both flags in any attempt to pin something at an offset above 4GB (Chris, Daniel Vetter). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Akash Goel <akash.goel@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Zou Nanhai <nanhai.zou@intel.com> Cc: Kristian Høgsberg <hoegsberg@gmail.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Acked-by: PDT Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449575707-20933-1-git-send-email-thomas.daniel@intel.com
2015-12-08 19:55:07 +08:00
}
vma->node.start = offset;
vma->node.size = size;
vma->node.color = obj->cache_level;
ret = drm_mm_reserve_node(&vm->mm, &vma->node);
if (ret) {
ret = i915_gem_evict_for_vma(vma);
if (ret == 0)
ret = drm_mm_reserve_node(&vm->mm, &vma->node);
}
if (ret)
goto err_vma;
drm/i915: Wa32bitGeneralStateOffset & Wa32bitInstructionBaseOffset There are some allocations that must be only referenced by 32-bit offsets. To limit the chances of having the first 4GB already full, objects not requiring this workaround use DRM_MM_SEARCH_BELOW/ DRM_MM_CREATE_TOP flags In specific, any resource used with flat/heapless (0x00000000-0xfffff000) General State Heap (GSH) or Instruction State Heap (ISH) must be in a 32-bit range, because the General State Offset and Instruction State Offset are limited to 32-bits. Objects must have EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag to indicate if they can be allocated above the 32-bit address range. To limit the chances of having the first 4GB already full, objects will use DRM_MM_SEARCH_BELOW + DRM_MM_CREATE_TOP flags when possible. The libdrm user of the EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag is here: http://lists.freedesktop.org/archives/intel-gfx/2015-September/075836.html v2: Changed flag logic from neeeds_32b, to supports_48b. v3: Moved 48-bit support flag back to exec_object. (Chris, Daniel) v4: Split pin flags into PIN_ZONE_4G and PIN_HIGH; update PIN_OFFSET_MASK to use last PIN_ defined instead of hard-coded value; use correct limit check in eb_vma_misplaced. (Chris) v5: Don't touch PIN_OFFSET_MASK and update workaround comment (Chris) v6: Apply pin-high for ggtt too (Chris) v7: Handle simultaneous pin-high and pin-mappable end correctly (Akash) Fix check for entries currently using +4GB addresses, use min_t and other polish in object_bind_to_vm (Chris) v8: Commit message updated to point to libdrm patch. v9: vmas are allocated in the correct ozone, so only check flag when the vma has not been allocated. (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v4) Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-01 20:33:57 +08:00
} else {
drm/i915: Add soft-pinning API for execbuffer Userspace can pass in an offset that it presumes the object is located at. The kernel will then do its utmost to fit the object into that location. The assumption is that userspace is handling its own object locations (for example along with full-ppgtt) and that the kernel will rarely have to make space for the user's requests. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> v2: Fixed incorrect eviction found by Michal Winiarski - fix suggested by Chris Wilson. Fixed incorrect error paths causing crash found by Michal Winiarski. (Not published externally) v3: Rebased because of trivial conflict in object_bind_to_vm. Fixed eviction to allow eviction of soft-pinned objects when another soft-pinned object used by a subsequent execbuffer overlaps reported by Michal Winiarski. (Not published externally) v4: Moved soft-pinned objects to the front of ordered_vmas so that they are pinned first after an address conflict happens to avoid repeated conflicts in rare cases (Suggested by Chris Wilson). Expanded comment on drm_i915_gem_exec_object2.offset to cover this new API. v5: Added I915_PARAM_HAS_EXEC_SOFTPIN parameter for detecting this capability (Kristian). Added check for multiple pinnings on eviction (Akash). Made sure buffers are not considered misplaced without the user specifying EXEC_OBJECT_SUPPORTS_48B_ADDRESS. User must assume responsibility for any addressing workarounds. Updated object2.offset field comment again to clarify NO_RELOC case (Chris). checkpatch cleanup. v6: Trivial rebase on latest drm-intel-nightly v7: Catch attempts to pin above the max virtual address size and return EINVAL (Tvrtko). Decouple EXEC_OBJECT_SUPPORTS_48B_ADDRESS and EXEC_OBJECT_PINNED flags, user must pass both flags in any attempt to pin something at an offset above 4GB (Chris, Daniel Vetter). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Akash Goel <akash.goel@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Zou Nanhai <nanhai.zou@intel.com> Cc: Kristian Høgsberg <hoegsberg@gmail.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Acked-by: PDT Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449575707-20933-1-git-send-email-thomas.daniel@intel.com
2015-12-08 19:55:07 +08:00
if (flags & PIN_HIGH) {
search_flag = DRM_MM_SEARCH_BELOW;
alloc_flag = DRM_MM_CREATE_TOP;
} else {
search_flag = DRM_MM_SEARCH_DEFAULT;
alloc_flag = DRM_MM_CREATE_DEFAULT;
}
drm/i915: Wa32bitGeneralStateOffset & Wa32bitInstructionBaseOffset There are some allocations that must be only referenced by 32-bit offsets. To limit the chances of having the first 4GB already full, objects not requiring this workaround use DRM_MM_SEARCH_BELOW/ DRM_MM_CREATE_TOP flags In specific, any resource used with flat/heapless (0x00000000-0xfffff000) General State Heap (GSH) or Instruction State Heap (ISH) must be in a 32-bit range, because the General State Offset and Instruction State Offset are limited to 32-bits. Objects must have EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag to indicate if they can be allocated above the 32-bit address range. To limit the chances of having the first 4GB already full, objects will use DRM_MM_SEARCH_BELOW + DRM_MM_CREATE_TOP flags when possible. The libdrm user of the EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag is here: http://lists.freedesktop.org/archives/intel-gfx/2015-September/075836.html v2: Changed flag logic from neeeds_32b, to supports_48b. v3: Moved 48-bit support flag back to exec_object. (Chris, Daniel) v4: Split pin flags into PIN_ZONE_4G and PIN_HIGH; update PIN_OFFSET_MASK to use last PIN_ defined instead of hard-coded value; use correct limit check in eb_vma_misplaced. (Chris) v5: Don't touch PIN_OFFSET_MASK and update workaround comment (Chris) v6: Apply pin-high for ggtt too (Chris) v7: Handle simultaneous pin-high and pin-mappable end correctly (Akash) Fix check for entries currently using +4GB addresses, use min_t and other polish in object_bind_to_vm (Chris) v8: Commit message updated to point to libdrm patch. v9: vmas are allocated in the correct ozone, so only check flag when the vma has not been allocated. (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v4) Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-01 20:33:57 +08:00
search_free:
drm/i915: Add soft-pinning API for execbuffer Userspace can pass in an offset that it presumes the object is located at. The kernel will then do its utmost to fit the object into that location. The assumption is that userspace is handling its own object locations (for example along with full-ppgtt) and that the kernel will rarely have to make space for the user's requests. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> v2: Fixed incorrect eviction found by Michal Winiarski - fix suggested by Chris Wilson. Fixed incorrect error paths causing crash found by Michal Winiarski. (Not published externally) v3: Rebased because of trivial conflict in object_bind_to_vm. Fixed eviction to allow eviction of soft-pinned objects when another soft-pinned object used by a subsequent execbuffer overlaps reported by Michal Winiarski. (Not published externally) v4: Moved soft-pinned objects to the front of ordered_vmas so that they are pinned first after an address conflict happens to avoid repeated conflicts in rare cases (Suggested by Chris Wilson). Expanded comment on drm_i915_gem_exec_object2.offset to cover this new API. v5: Added I915_PARAM_HAS_EXEC_SOFTPIN parameter for detecting this capability (Kristian). Added check for multiple pinnings on eviction (Akash). Made sure buffers are not considered misplaced without the user specifying EXEC_OBJECT_SUPPORTS_48B_ADDRESS. User must assume responsibility for any addressing workarounds. Updated object2.offset field comment again to clarify NO_RELOC case (Chris). checkpatch cleanup. v6: Trivial rebase on latest drm-intel-nightly v7: Catch attempts to pin above the max virtual address size and return EINVAL (Tvrtko). Decouple EXEC_OBJECT_SUPPORTS_48B_ADDRESS and EXEC_OBJECT_PINNED flags, user must pass both flags in any attempt to pin something at an offset above 4GB (Chris, Daniel Vetter). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Akash Goel <akash.goel@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Zou Nanhai <nanhai.zou@intel.com> Cc: Kristian Høgsberg <hoegsberg@gmail.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Acked-by: PDT Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449575707-20933-1-git-send-email-thomas.daniel@intel.com
2015-12-08 19:55:07 +08:00
ret = drm_mm_insert_node_in_range_generic(&vm->mm, &vma->node,
size, alignment,
obj->cache_level,
start, end,
search_flag,
alloc_flag);
if (ret) {
ret = i915_gem_evict_something(dev, vm, size, alignment,
obj->cache_level,
start, end,
flags);
if (ret == 0)
goto search_free;
goto err_vma;
drm/i915: Add soft-pinning API for execbuffer Userspace can pass in an offset that it presumes the object is located at. The kernel will then do its utmost to fit the object into that location. The assumption is that userspace is handling its own object locations (for example along with full-ppgtt) and that the kernel will rarely have to make space for the user's requests. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> v2: Fixed incorrect eviction found by Michal Winiarski - fix suggested by Chris Wilson. Fixed incorrect error paths causing crash found by Michal Winiarski. (Not published externally) v3: Rebased because of trivial conflict in object_bind_to_vm. Fixed eviction to allow eviction of soft-pinned objects when another soft-pinned object used by a subsequent execbuffer overlaps reported by Michal Winiarski. (Not published externally) v4: Moved soft-pinned objects to the front of ordered_vmas so that they are pinned first after an address conflict happens to avoid repeated conflicts in rare cases (Suggested by Chris Wilson). Expanded comment on drm_i915_gem_exec_object2.offset to cover this new API. v5: Added I915_PARAM_HAS_EXEC_SOFTPIN parameter for detecting this capability (Kristian). Added check for multiple pinnings on eviction (Akash). Made sure buffers are not considered misplaced without the user specifying EXEC_OBJECT_SUPPORTS_48B_ADDRESS. User must assume responsibility for any addressing workarounds. Updated object2.offset field comment again to clarify NO_RELOC case (Chris). checkpatch cleanup. v6: Trivial rebase on latest drm-intel-nightly v7: Catch attempts to pin above the max virtual address size and return EINVAL (Tvrtko). Decouple EXEC_OBJECT_SUPPORTS_48B_ADDRESS and EXEC_OBJECT_PINNED flags, user must pass both flags in any attempt to pin something at an offset above 4GB (Chris, Daniel Vetter). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Akash Goel <akash.goel@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Zou Nanhai <nanhai.zou@intel.com> Cc: Kristian Høgsberg <hoegsberg@gmail.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Acked-by: PDT Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449575707-20933-1-git-send-email-thomas.daniel@intel.com
2015-12-08 19:55:07 +08:00
}
}
if (WARN_ON(!i915_gem_valid_gtt_space(vma, obj->cache_level))) {
ret = -EINVAL;
goto err_remove_node;
}
drm/i915: Infrastructure for supporting different GGTT views per object Things like reliable GGTT mappings and mirrored 2d-on-3d display will need to map objects into the same address space multiple times. Added a GGTT view concept and linked it with the VMA to distinguish between multiple instances per address space. New objects and GEM functions which do not take this new view as a parameter assume the default of zero (I915_GGTT_VIEW_NORMAL) which preserves the previous behaviour. This now means that objects can have multiple VMA entries so the code which assumed there will only be one also had to be modified. Alternative GGTT views are supposed to borrow DMA addresses from obj->pages which is DMA mapped on first VMA instantiation and unmapped on the last one going away. v2: * Removed per view special casing in i915_gem_ggtt_prepare / finish_object in favour of creating and destroying DMA mappings on first VMA instantiation and last VMA destruction. (Daniel Vetter) * Simplified i915_vma_unbind which does not need to count the GGTT views. (Daniel Vetter) * Also moved obj->map_and_fenceable reset under the same check. * Checkpatch cleanups. v3: * Only retire objects once the last VMA is unbound. v4: * Keep scatter-gather table for alternative views persistent for the lifetime of the VMA. * Propagate binding errors to callers and handle appropriately. v5: * Explicitly look for normal GGTT view in i915_gem_obj_bound to align usage in i915_gem_object_ggtt_unpin. (Michel Thierry) * Change to single if statement in i915_gem_obj_to_ggtt. (Michel Thierry) * Removed stray semi-colon in i915_gem_object_set_cache_level. For: VIZ-4544 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Michel Thierry <michel.thierry@intel.com> [danvet: Drop hunk from i915_gem_shrink since it's just prettification but upsets a __must_check warning.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-11 01:27:58 +08:00
trace_i915_vma_bind(vma, flags);
ret = i915_vma_bind(vma, obj->cache_level, flags);
drm/i915: Infrastructure for supporting different GGTT views per object Things like reliable GGTT mappings and mirrored 2d-on-3d display will need to map objects into the same address space multiple times. Added a GGTT view concept and linked it with the VMA to distinguish between multiple instances per address space. New objects and GEM functions which do not take this new view as a parameter assume the default of zero (I915_GGTT_VIEW_NORMAL) which preserves the previous behaviour. This now means that objects can have multiple VMA entries so the code which assumed there will only be one also had to be modified. Alternative GGTT views are supposed to borrow DMA addresses from obj->pages which is DMA mapped on first VMA instantiation and unmapped on the last one going away. v2: * Removed per view special casing in i915_gem_ggtt_prepare / finish_object in favour of creating and destroying DMA mappings on first VMA instantiation and last VMA destruction. (Daniel Vetter) * Simplified i915_vma_unbind which does not need to count the GGTT views. (Daniel Vetter) * Also moved obj->map_and_fenceable reset under the same check. * Checkpatch cleanups. v3: * Only retire objects once the last VMA is unbound. v4: * Keep scatter-gather table for alternative views persistent for the lifetime of the VMA. * Propagate binding errors to callers and handle appropriately. v5: * Explicitly look for normal GGTT view in i915_gem_obj_bound to align usage in i915_gem_object_ggtt_unpin. (Michel Thierry) * Change to single if statement in i915_gem_obj_to_ggtt. (Michel Thierry) * Removed stray semi-colon in i915_gem_object_set_cache_level. For: VIZ-4544 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Michel Thierry <michel.thierry@intel.com> [danvet: Drop hunk from i915_gem_shrink since it's just prettification but upsets a __must_check warning.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-11 01:27:58 +08:00
if (ret)
drm/i915: avoid leaking DMA mappings We have 3 types of DMA mappings for GEM objects: 1. physically contiguous for stolen and for objects needing contiguous memory 2. DMA-buf mappings imported via a DMA-buf attach operation 3. SG DMA mappings for shmem backed and userptr objects For 1. and 2. the lifetime of the DMA mapping matches the lifetime of the corresponding backing pages and so in practice we create/release the mapping in the object's get_pages/put_pages callback. For 3. the lifetime of the mapping matches that of any existing GPU binding of the object, so we'll create the mapping when the object is bound to the first vma and release the mapping when the object is unbound from its last vma. Since the object can be bound to multiple vmas, we can end up creating a new DMA mapping in the 3. case even if the object already had one. This is not allowed by the DMA API and can lead to leaked mapping data and IOMMU memory space starvation in certain cases. For example HW IOMMU drivers (intel_iommu) allocate a new range from their memory space whenever a mapping is created, silently overriding a pre-existing mapping. Fix this by moving the creation/removal of DMA mappings to the object's get_pages/put_pages callbacks. These callbacks already check for and do an early return in case of any nested calls. This way objects of the 3. case also become more like the other object types. I noticed this issue by enabling DMA debugging, which got disabled after a while due to its internal mapping tables getting full. It also reported errors in connection to random other drivers that did a DMA mapping for an address that was previously mapped by i915 but was never released. Besides these diagnostic messages and the memory space starvation problem for IOMMUs, I'm not aware of this causing a real issue. The fix is based on a patch from Chris. v2: - move the DMA mapping create/remove calls to the get_pages/put_pages callbacks instead of adding new callbacks for these (Chris) v3: - also fix the get_page cache logic on the userptr async path (Chris) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-09 17:59:05 +08:00
goto err_remove_node;
drm/i915: Infrastructure for supporting different GGTT views per object Things like reliable GGTT mappings and mirrored 2d-on-3d display will need to map objects into the same address space multiple times. Added a GGTT view concept and linked it with the VMA to distinguish between multiple instances per address space. New objects and GEM functions which do not take this new view as a parameter assume the default of zero (I915_GGTT_VIEW_NORMAL) which preserves the previous behaviour. This now means that objects can have multiple VMA entries so the code which assumed there will only be one also had to be modified. Alternative GGTT views are supposed to borrow DMA addresses from obj->pages which is DMA mapped on first VMA instantiation and unmapped on the last one going away. v2: * Removed per view special casing in i915_gem_ggtt_prepare / finish_object in favour of creating and destroying DMA mappings on first VMA instantiation and last VMA destruction. (Daniel Vetter) * Simplified i915_vma_unbind which does not need to count the GGTT views. (Daniel Vetter) * Also moved obj->map_and_fenceable reset under the same check. * Checkpatch cleanups. v3: * Only retire objects once the last VMA is unbound. v4: * Keep scatter-gather table for alternative views persistent for the lifetime of the VMA. * Propagate binding errors to callers and handle appropriately. v5: * Explicitly look for normal GGTT view in i915_gem_obj_bound to align usage in i915_gem_object_ggtt_unpin. (Michel Thierry) * Change to single if statement in i915_gem_obj_to_ggtt. (Michel Thierry) * Removed stray semi-colon in i915_gem_object_set_cache_level. For: VIZ-4544 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Michel Thierry <michel.thierry@intel.com> [danvet: Drop hunk from i915_gem_shrink since it's just prettification but upsets a __must_check warning.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-11 01:27:58 +08:00
list_move_tail(&obj->global_list, &dev_priv->mm.bound_list);
list_add_tail(&vma->vm_link, &vm->inactive_list);
obj->bind_count++;
return vma;
err_remove_node:
drm_mm_remove_node(&vma->node);
err_vma:
vma = ERR_PTR(ret);
err_unpin:
i915_gem_object_unpin_pages(obj);
return vma;
}
bool
i915_gem_clflush_object(struct drm_i915_gem_object *obj,
bool force)
{
/* If we don't have a page list set up, then we're not pinned
* to GPU, and we can ignore the cache flush because it'll happen
* again at bind time.
*/
if (obj->pages == NULL)
return false;
/*
* Stolen memory is always coherent with the GPU as it is explicitly
* marked as wc by the system, or the system is cache-coherent.
*/
if (obj->stolen || obj->phys_handle)
return false;
/* If the GPU is snooping the contents of the CPU cache,
* we do not need to manually clear the CPU cache lines. However,
* the caches are only snooped when the render cache is
* flushed/invalidated. As we always have to emit invalidations
* and flushes when moving into and out of the RENDER domain, correct
* snooping behaviour occurs naturally as the result of our domain
* tracking.
*/
if (!force && cpu_cache_is_coherent(obj->base.dev, obj->cache_level)) {
obj->cache_dirty = true;
return false;
}
trace_i915_gem_object_clflush(obj);
drm_clflush_sg(obj->pages);
obj->cache_dirty = false;
return true;
}
/** Flushes the GTT write domain for the object if it's dirty. */
static void
i915_gem_object_flush_gtt_write_domain(struct drm_i915_gem_object *obj)
{
uint32_t old_write_domain;
if (obj->base.write_domain != I915_GEM_DOMAIN_GTT)
return;
/* No actual flushing is required for the GTT write domain. Writes
* to it immediately go to main memory as far as we know, so there's
* no chipset flush. It also doesn't land in render cache.
*
* However, we do have to enforce the order so that all writes through
* the GTT land before any writes to the device, such as updates to
* the GATT itself.
*/
wmb();
old_write_domain = obj->base.write_domain;
obj->base.write_domain = 0;
intel_fb_obj_flush(obj, false, ORIGIN_GTT);
drm/i915: Track frontbuffer invalidation/flushing So these are the guts of the new beast. This tracks when a frontbuffer gets invalidated (due to frontbuffer rendering) and hence should be constantly scaned out, and when it's flushed again and can be compressed/one-shot-upload. Rules for flushing are simple: The frontbuffer needs one more full upload starting from the next vblank. Which means that the flushing can _only_ be called once the frontbuffer update has been latched. But this poses a problem for pageflips: We can't just delay the flushing until the pageflip is latched, since that would pose the risk that we override frontbuffer rendering that has been scheduled in-between the pageflip ioctl and the actual latching. To handle this track asynchronous invalidations (and also pageflip) state per-ring and delay any in-between flushing until the rendering has completed. And also cancel any delayed flushing if we get a new invalidation request (whether delayed or not). Also call intel_mark_fb_busy in both cases in all cases to make sure that we keep the screen at the highest refresh rate both on flips, synchronous plane updates and for frontbuffer rendering. v2: Lots of improvements Suggestions from Chris: - Move invalidate/flush in flush_*_domain and set_to_*_domain. - Drop the flush in busy_ioctl since it's redundant. Was a leftover from an earlier concept to track flips/delayed flushes. - Don't forget about the initial modeset enable/final disable. Suggested by Chris. Track flips accurately, too. Since flips complete independently of rendering we need to track pending flips in a separate mask. Again if an invalidate happens we need to cancel the evenutal flush to avoid races. v3: Provide correct header declarations for flip functions. Currently not needed outside of intel_display.c, but part of the proper interface. v4: Add proper domain management to fbcon so that the fbcon buffer is also tracked correctly. v5: Fixup locking around the fbcon set_to_gtt_domain call. v6: More comments from Chris: - Split out fbcon changes. - Drop superflous checks for potential scanout before calling intel_fb functions - we can micro-optimize this later. - s/intel_fb_/intel_fb_obj_/ to make it clear that this deals in gem object. We already have precedence for fb_obj in the pin_and_fence functions. v7: Clarify the semantics of the flip flush handling by renaming things a bit: - Don't go through a gem object but take the relevant frontbuffer bits directly. These functions center on the plane, the actual object is irrelevant - even a flip to the same object as already active should cause a flush. - Add a new intel_frontbuffer_flip for synchronous plane updates. It currently just calls intel_frontbuffer_flush since the implemenation differs. This way we achieve a clear split between one-shot update events on one side and frontbuffer rendering with potentially a very long delay between the invalidate and flush. Chris and I also had some discussions about mark_busy and whether it is appropriate to call from flush. But mark busy is a state which should be derived from the 3 events (invalidate, flush, flip) we now have by the users, like psr does by tracking relevant information in psr.busy_frontbuffer_bits. DRRS (the only real use of mark_busy for frontbuffer) needs to have similar logic. With that the overall mark_busy in the core could be removed. v8: Only when retiring gpu buffers only flush frontbuffer bits we actually invalidated in a batch. Just for safety since before any additional usage/invalidate we should always retire current rendering. Suggested by Chris Wilson. v9: Actually use intel_frontbuffer_flip in all appropriate places. Spotted by Chris. v10: Address more comments from Chris: - Don't call _flip in set_base when the crtc is inactive, avoids redunancy in the modeset case with the initial enabling of all planes. - Add comments explaining that the initial/final plane enable/disable still has work left to do before it's fully generic. v11: Only invalidate for gtt/cpu access when writing. Spotted by Chris. v12: s/_flush/_flip/ in intel_overlay.c per Chris' comment. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-19 22:01:59 +08:00
trace_i915_gem_object_change_domain(obj,
obj->base.read_domains,
old_write_domain);
}
/** Flushes the CPU write domain for the object if it's dirty. */
static void
drm/i915: Simplify flush_cpu_write_domain We can push down the decision whether to force flushing into the implementation since in all places that matter obj->pin_display is accurate already. The only place where the optimization really matters is the sw_finish_ioctl, and that already checks for obj->pin_display on its own. I suspect that this was simply an artifact of how commit 2c22569bba8af6c2976d5f9479fe54a53a39966b Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Aug 9 12:26:45 2013 +0100 drm/i915: Update rules for writing through the LLC with the cpu evolved - only v2 added the pin_display tracking. Note that we still retain the gist of this logic from the above commit with the explicit force argument for the low-level clflush function. Ville noted in his review that there's a slight behavioural change in the set_to_gtt_domain function, which now also will flush display plane data. This opens-open the potential for userspace to start doing buggy things by omitting the sw_finish_ioctl, which is why I've rejected a functional equivalent patch from Ville a while ago: http://lists.freedesktop.org/archives/intel-gfx/2013-November/036421.html But on second consideration it's not that evil, and in any case the justification here is more clarity, not allowing crazy userspace. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-21 21:53:48 +08:00
i915_gem_object_flush_cpu_write_domain(struct drm_i915_gem_object *obj)
{
uint32_t old_write_domain;
if (obj->base.write_domain != I915_GEM_DOMAIN_CPU)
return;
drm/i915: Simplify flush_cpu_write_domain We can push down the decision whether to force flushing into the implementation since in all places that matter obj->pin_display is accurate already. The only place where the optimization really matters is the sw_finish_ioctl, and that already checks for obj->pin_display on its own. I suspect that this was simply an artifact of how commit 2c22569bba8af6c2976d5f9479fe54a53a39966b Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Aug 9 12:26:45 2013 +0100 drm/i915: Update rules for writing through the LLC with the cpu evolved - only v2 added the pin_display tracking. Note that we still retain the gist of this logic from the above commit with the explicit force argument for the low-level clflush function. Ville noted in his review that there's a slight behavioural change in the set_to_gtt_domain function, which now also will flush display plane data. This opens-open the potential for userspace to start doing buggy things by omitting the sw_finish_ioctl, which is why I've rejected a functional equivalent patch from Ville a while ago: http://lists.freedesktop.org/archives/intel-gfx/2013-November/036421.html But on second consideration it's not that evil, and in any case the justification here is more clarity, not allowing crazy userspace. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-21 21:53:48 +08:00
if (i915_gem_clflush_object(obj, obj->pin_display))
i915_gem_chipset_flush(to_i915(obj->base.dev));
old_write_domain = obj->base.write_domain;
obj->base.write_domain = 0;
intel_fb_obj_flush(obj, false, ORIGIN_CPU);
drm/i915: Track frontbuffer invalidation/flushing So these are the guts of the new beast. This tracks when a frontbuffer gets invalidated (due to frontbuffer rendering) and hence should be constantly scaned out, and when it's flushed again and can be compressed/one-shot-upload. Rules for flushing are simple: The frontbuffer needs one more full upload starting from the next vblank. Which means that the flushing can _only_ be called once the frontbuffer update has been latched. But this poses a problem for pageflips: We can't just delay the flushing until the pageflip is latched, since that would pose the risk that we override frontbuffer rendering that has been scheduled in-between the pageflip ioctl and the actual latching. To handle this track asynchronous invalidations (and also pageflip) state per-ring and delay any in-between flushing until the rendering has completed. And also cancel any delayed flushing if we get a new invalidation request (whether delayed or not). Also call intel_mark_fb_busy in both cases in all cases to make sure that we keep the screen at the highest refresh rate both on flips, synchronous plane updates and for frontbuffer rendering. v2: Lots of improvements Suggestions from Chris: - Move invalidate/flush in flush_*_domain and set_to_*_domain. - Drop the flush in busy_ioctl since it's redundant. Was a leftover from an earlier concept to track flips/delayed flushes. - Don't forget about the initial modeset enable/final disable. Suggested by Chris. Track flips accurately, too. Since flips complete independently of rendering we need to track pending flips in a separate mask. Again if an invalidate happens we need to cancel the evenutal flush to avoid races. v3: Provide correct header declarations for flip functions. Currently not needed outside of intel_display.c, but part of the proper interface. v4: Add proper domain management to fbcon so that the fbcon buffer is also tracked correctly. v5: Fixup locking around the fbcon set_to_gtt_domain call. v6: More comments from Chris: - Split out fbcon changes. - Drop superflous checks for potential scanout before calling intel_fb functions - we can micro-optimize this later. - s/intel_fb_/intel_fb_obj_/ to make it clear that this deals in gem object. We already have precedence for fb_obj in the pin_and_fence functions. v7: Clarify the semantics of the flip flush handling by renaming things a bit: - Don't go through a gem object but take the relevant frontbuffer bits directly. These functions center on the plane, the actual object is irrelevant - even a flip to the same object as already active should cause a flush. - Add a new intel_frontbuffer_flip for synchronous plane updates. It currently just calls intel_frontbuffer_flush since the implemenation differs. This way we achieve a clear split between one-shot update events on one side and frontbuffer rendering with potentially a very long delay between the invalidate and flush. Chris and I also had some discussions about mark_busy and whether it is appropriate to call from flush. But mark busy is a state which should be derived from the 3 events (invalidate, flush, flip) we now have by the users, like psr does by tracking relevant information in psr.busy_frontbuffer_bits. DRRS (the only real use of mark_busy for frontbuffer) needs to have similar logic. With that the overall mark_busy in the core could be removed. v8: Only when retiring gpu buffers only flush frontbuffer bits we actually invalidated in a batch. Just for safety since before any additional usage/invalidate we should always retire current rendering. Suggested by Chris Wilson. v9: Actually use intel_frontbuffer_flip in all appropriate places. Spotted by Chris. v10: Address more comments from Chris: - Don't call _flip in set_base when the crtc is inactive, avoids redunancy in the modeset case with the initial enabling of all planes. - Add comments explaining that the initial/final plane enable/disable still has work left to do before it's fully generic. v11: Only invalidate for gtt/cpu access when writing. Spotted by Chris. v12: s/_flush/_flip/ in intel_overlay.c per Chris' comment. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-19 22:01:59 +08:00
trace_i915_gem_object_change_domain(obj,
obj->base.read_domains,
old_write_domain);
}
/**
* Moves a single object to the GTT read, and possibly write domain.
* @obj: object to act on
* @write: ask for write access or read only
*
* This function returns when the move is complete, including waiting on
* flushes to occur.
*/
int
i915_gem_object_set_to_gtt_domain(struct drm_i915_gem_object *obj, bool write)
{
uint32_t old_write_domain, old_read_domains;
struct i915_vma *vma;
int ret;
ret = i915_gem_object_wait_rendering(obj, !write);
if (ret)
return ret;
drm/i915: Wait on external rendering for GEM objects When transitioning to the GTT or CPU domain we wait on all rendering from i915 to complete (with the optimisation of allowing concurrent read access by both the GPU and client). We don't yet ensure all rendering from third parties (tracked by implicit fences on the dma-buf) is complete. Since implicitly tracked rendering by third parties will ignore our cache-domain tracking, we have to always wait upon rendering from third-parties when transitioning to direct access to the backing store. We still rely on clients notifying us of cache domain changes (i.e. they need to move to the GTT read or write domain after doing a CPU access before letting the third party render again). v2: This introduces a potential WARN_ON into i915_gem_object_free() as the current i915_vma_unbind() calls i915_gem_object_wait_rendering(). To hit this path we first need to render with the GPU, have a dma-buf attached with an unsignaled fence and then interrupt the wait. It does get fixed later in the series (when i915_vma_unbind() only waits on the active VMA and not all, including third-party, rendering. To offset that risk, use the __i915_vma_unbind_no_wait hack. Testcase: igt/prime_vgem/basic-fence-read Testcase: igt/prime_vgem/basic-fence-mmap Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-8-git-send-email-chris@chris-wilson.co.uk
2016-07-20 16:21:15 +08:00
if (obj->base.write_domain == I915_GEM_DOMAIN_GTT)
return 0;
/* Flush and acquire obj->pages so that we are coherent through
* direct access in memory with previous cached writes through
* shmemfs and that our cache domain tracking remains valid.
* For example, if the obj->filp was moved to swap without us
* being notified and releasing the pages, we would mistakenly
* continue to assume that the obj remained out of the CPU cached
* domain.
*/
ret = i915_gem_object_get_pages(obj);
if (ret)
return ret;
drm/i915: Simplify flush_cpu_write_domain We can push down the decision whether to force flushing into the implementation since in all places that matter obj->pin_display is accurate already. The only place where the optimization really matters is the sw_finish_ioctl, and that already checks for obj->pin_display on its own. I suspect that this was simply an artifact of how commit 2c22569bba8af6c2976d5f9479fe54a53a39966b Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Aug 9 12:26:45 2013 +0100 drm/i915: Update rules for writing through the LLC with the cpu evolved - only v2 added the pin_display tracking. Note that we still retain the gist of this logic from the above commit with the explicit force argument for the low-level clflush function. Ville noted in his review that there's a slight behavioural change in the set_to_gtt_domain function, which now also will flush display plane data. This opens-open the potential for userspace to start doing buggy things by omitting the sw_finish_ioctl, which is why I've rejected a functional equivalent patch from Ville a while ago: http://lists.freedesktop.org/archives/intel-gfx/2013-November/036421.html But on second consideration it's not that evil, and in any case the justification here is more clarity, not allowing crazy userspace. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-21 21:53:48 +08:00
i915_gem_object_flush_cpu_write_domain(obj);
/* Serialise direct access to this object with the barriers for
* coherent writes from the GPU, by effectively invalidating the
* GTT domain upon first access.
*/
if ((obj->base.read_domains & I915_GEM_DOMAIN_GTT) == 0)
mb();
old_write_domain = obj->base.write_domain;
old_read_domains = obj->base.read_domains;
/* It should now be out of any other write domains, and we can update
* the domain values for our changes.
*/
BUG_ON((obj->base.write_domain & ~I915_GEM_DOMAIN_GTT) != 0);
obj->base.read_domains |= I915_GEM_DOMAIN_GTT;
if (write) {
obj->base.read_domains = I915_GEM_DOMAIN_GTT;
obj->base.write_domain = I915_GEM_DOMAIN_GTT;
obj->dirty = 1;
}
trace_i915_gem_object_change_domain(obj,
old_read_domains,
old_write_domain);
/* And bump the LRU for this access */
vma = i915_gem_obj_to_ggtt(obj);
if (vma &&
drm_mm_node_allocated(&vma->node) &&
!i915_vma_is_active(vma))
list_move_tail(&vma->vm_link, &vma->vm->inactive_list);
return 0;
}
/**
* Changes the cache-level of an object across all VMA.
* @obj: object to act on
* @cache_level: new cache level to set for the object
*
* After this function returns, the object will be in the new cache-level
* across all GTT and the contents of the backing storage will be coherent,
* with respect to the new cache-level. In order to keep the backing storage
* coherent for all users, we only allow a single cache level to be set
* globally on the object and prevent it from being changed whilst the
* hardware is reading from the object. That is if the object is currently
* on the scanout it will be set to uncached (or equivalent display
* cache coherency) and all non-MOCS GPU access will also be uncached so
* that all direct access to the scanout remains coherent.
*/
int i915_gem_object_set_cache_level(struct drm_i915_gem_object *obj,
enum i915_cache_level cache_level)
{
struct i915_vma *vma;
int ret = 0;
if (obj->cache_level == cache_level)
goto out;
/* Inspect the list of currently bound VMA and unbind any that would
* be invalid given the new cache-level. This is principally to
* catch the issue of the CS prefetch crossing page boundaries and
* reading an invalid PTE on older architectures.
*/
restart:
list_for_each_entry(vma, &obj->vma_list, obj_link) {
if (!drm_mm_node_allocated(&vma->node))
continue;
if (vma->pin_count) {
DRM_DEBUG("can not change the cache level of pinned objects\n");
return -EBUSY;
}
if (i915_gem_valid_gtt_space(vma, cache_level))
continue;
ret = i915_vma_unbind(vma);
if (ret)
return ret;
/* As unbinding may affect other elements in the
* obj->vma_list (due to side-effects from retiring
* an active vma), play safe and restart the iterator.
*/
goto restart;
}
/* We can reuse the existing drm_mm nodes but need to change the
* cache-level on the PTE. We could simply unbind them all and
* rebind with the correct cache-level on next use. However since
* we already have a valid slot, dma mapping, pages etc, we may as
* rewrite the PTE in the belief that doing so tramples upon less
* state and so involves less work.
*/
if (obj->bind_count) {
/* Before we change the PTE, the GPU must not be accessing it.
* If we wait upon the object, we know that all the bound
* VMA are no longer active.
*/
ret = i915_gem_object_wait_rendering(obj, false);
if (ret)
return ret;
if (!HAS_LLC(obj->base.dev) && cache_level != I915_CACHE_NONE) {
/* Access to snoopable pages through the GTT is
* incoherent and on some machines causes a hard
* lockup. Relinquish the CPU mmaping to force
* userspace to refault in the pages and we can
* then double check if the GTT mapping is still
* valid for that pointer access.
*/
i915_gem_release_mmap(obj);
/* As we no longer need a fence for GTT access,
* we can relinquish it now (and so prevent having
* to steal a fence from someone else on the next
* fence request). Note GPU activity would have
* dropped the fence as all snoopable access is
* supposed to be linear.
*/
ret = i915_gem_object_put_fence(obj);
if (ret)
return ret;
} else {
/* We either have incoherent backing store and
* so no GTT access or the architecture is fully
* coherent. In such cases, existing GTT mmaps
* ignore the cache bit in the PTE and we can
* rewrite it without confusing the GPU or having
* to force userspace to fault back in its mmaps.
*/
}
list_for_each_entry(vma, &obj->vma_list, obj_link) {
if (!drm_mm_node_allocated(&vma->node))
continue;
ret = i915_vma_bind(vma, cache_level, PIN_UPDATE);
if (ret)
return ret;
}
}
list_for_each_entry(vma, &obj->vma_list, obj_link)
vma->node.color = cache_level;
obj->cache_level = cache_level;
out:
/* Flush the dirty CPU caches to the backing storage so that the
* object is now coherent at its new cache level (with respect
* to the access domain).
*/
drm/i915: Support for pread/pwrite from/to non shmem backed objects This patch adds support for extending the pread/pwrite functionality for objects not backed by shmem. The access will be made through gtt interface. This will cover objects backed by stolen memory as well as other non-shmem backed objects. v2: Drop locks around slow_user_access, prefault the pages before access (Chris) v3: Rebased to the latest drm-intel-nightly (Ankit) v4: Moved page base & offset calculations outside the copy loop, corrected data types for size and offset variables, corrected if-else braces format (Tvrtko/kerneldocs) v5: Enabled pread/pwrite for all non-shmem backed objects including without tiling restrictions (Ankit) v6: Using pwrite_fast for non-shmem backed objects as well (Chris) v7: Updated commit message, Renamed i915_gem_gtt_read to i915_gem_gtt_copy, added pwrite slow path for non-shmem backed objects (Chris/Tvrtko) v8: Updated v7 commit message, mutex unlock around pwrite slow path for non-shmem backed objects (Tvrtko) v9: Corrected check during pread_ioctl, to avoid shmem_pread being called for non-shmem backed objects (Tvrtko) v10: Moved the write_domain check to needs_clflush and tiling mode check to pwrite_fast (Chris) v11: Use pwrite_fast fallback for all objects (shmem and non-shmem backed), call fast_user_write regardless of pagefault in previous iteration v12: Use page-by-page copy for slow user access too (Chris) v13: Handled EFAULT, Avoid use of WARN_ON, put_fence only if whole obj pinned (Chris) v14: Corrected datatypes/initializations (Tvrtko) Testcase: igt/gem_stolen, igt/gem_pread, igt/gem_pwrite Signed-off-by: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465548783-19712-1-git-send-email-ankitprasad.r.sharma@intel.com
2016-06-10 16:53:03 +08:00
if (obj->cache_dirty && cpu_write_needs_clflush(obj)) {
if (i915_gem_clflush_object(obj, true))
i915_gem_chipset_flush(to_i915(obj->base.dev));
}
return 0;
}
int i915_gem_get_caching_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_caching *args = data;
struct drm_i915_gem_object *obj;
obj = i915_gem_object_lookup(file, args->handle);
if (!obj)
return -ENOENT;
switch (obj->cache_level) {
case I915_CACHE_LLC:
case I915_CACHE_L3_LLC:
args->caching = I915_CACHING_CACHED;
break;
case I915_CACHE_WT:
args->caching = I915_CACHING_DISPLAY;
break;
default:
args->caching = I915_CACHING_NONE;
break;
}
i915_gem_object_put_unlocked(obj);
return 0;
}
int i915_gem_set_caching_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct drm_i915_gem_caching *args = data;
struct drm_i915_gem_object *obj;
enum i915_cache_level level;
int ret;
switch (args->caching) {
case I915_CACHING_NONE:
level = I915_CACHE_NONE;
break;
case I915_CACHING_CACHED:
/*
* Due to a HW issue on BXT A stepping, GPU stores via a
* snooped mapping may leave stale data in a corresponding CPU
* cacheline, whereas normally such cachelines would get
* invalidated.
*/
if (!HAS_LLC(dev) && !HAS_SNOOP(dev))
return -ENODEV;
level = I915_CACHE_LLC;
break;
case I915_CACHING_DISPLAY:
level = HAS_WT(dev) ? I915_CACHE_WT : I915_CACHE_NONE;
break;
default:
return -EINVAL;
}
intel_runtime_pm_get(dev_priv);
ret = i915_mutex_lock_interruptible(dev);
if (ret)
goto rpm_put;
obj = i915_gem_object_lookup(file, args->handle);
if (!obj) {
ret = -ENOENT;
goto unlock;
}
ret = i915_gem_object_set_cache_level(obj, level);
i915_gem_object_put(obj);
unlock:
mutex_unlock(&dev->struct_mutex);
rpm_put:
intel_runtime_pm_put(dev_priv);
return ret;
}
/*
* Prepare buffer for display plane (scanout, cursors, etc).
* Can be called from an uninterruptible phase (modesetting) and allows
* any flushes to be pipelined (for pageflips).
*/
int
i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj,
u32 alignment,
const struct i915_ggtt_view *view)
{
u32 old_read_domains, old_write_domain;
int ret;
/* Mark the pin_display early so that we account for the
* display coherency whilst setting up the cache domains.
*/
obj->pin_display++;
/* The display engine is not coherent with the LLC cache on gen6. As
* a result, we make sure that the pinning that is about to occur is
* done with uncached PTEs. This is lowest common denominator for all
* chipsets.
*
* However for gen6+, we could do better by using the GFDT bit instead
* of uncaching, which would allow us to flush all the LLC-cached data
* with that bit in the PTE to main memory with just one PIPE_CONTROL.
*/
ret = i915_gem_object_set_cache_level(obj,
HAS_WT(obj->base.dev) ? I915_CACHE_WT : I915_CACHE_NONE);
if (ret)
goto err_unpin_display;
/* As the user may map the buffer once pinned in the display plane
* (e.g. libkms for the bootup splash), we have to ensure that we
* always use map_and_fenceable for all scanout buffers.
*/
drm/i915/skl: Support secondary (rotated) frame buffer mapping 90/270 rotated scanout needs a rotated GTT view of the framebuffer. This is put in a separate VMA with a dedicated ggtt view and wired such that it is created when a framebuffer is pinned to a 90/270 rotated plane. Rotation is only possible with Yb/Yf buffers and error is propagated to user space in case of a mismatch. Special rotated page view is constructed at the VMA creation time by borrowing the DMA addresses from obj->pages. v2: * Do not bother with pages for rotated sg list, just populate the DMA addresses. (Daniel Vetter) * Checkpatch cleanup. v3: * Rebased on top of new plane handling (create rotated mapping when setting the rotation property). * Unpin rotated VMA on unpinning from display plane. * Simplify rotation check using bitwise AND. (Chris Wilson) v4: * Fix unpinning of optional rotated mapping so it is really considered to be optional. v5: * Rebased for fb modifier changes. * Rebased for atomic commit. * Only pin needed view for display. (Ville Syrjälä, Daniel Vetter) v6: * Rebased after preparatory work has been extracted out. (Daniel Vetter) v7: * Slightly simplified tiling geometry calculation. * Moved rotated GGTT view implementation into i915_gem_gtt.c (Daniel Vetter) v8: * Do not use i915_gem_obj_size to get object size since that actually returns the size of an VMA which may not exist. * Rebased for ggtt view changes. v9: * Rebased after code review changes on the preceding patches. * Tidy function definitions. (Joonas Lahtinen) For: VIZ-4726 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v4) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-23 19:10:36 +08:00
ret = i915_gem_object_ggtt_pin(obj, view, alignment,
view->type == I915_GGTT_VIEW_NORMAL ?
PIN_MAPPABLE : 0);
if (ret)
goto err_unpin_display;
drm/i915: Simplify flush_cpu_write_domain We can push down the decision whether to force flushing into the implementation since in all places that matter obj->pin_display is accurate already. The only place where the optimization really matters is the sw_finish_ioctl, and that already checks for obj->pin_display on its own. I suspect that this was simply an artifact of how commit 2c22569bba8af6c2976d5f9479fe54a53a39966b Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Aug 9 12:26:45 2013 +0100 drm/i915: Update rules for writing through the LLC with the cpu evolved - only v2 added the pin_display tracking. Note that we still retain the gist of this logic from the above commit with the explicit force argument for the low-level clflush function. Ville noted in his review that there's a slight behavioural change in the set_to_gtt_domain function, which now also will flush display plane data. This opens-open the potential for userspace to start doing buggy things by omitting the sw_finish_ioctl, which is why I've rejected a functional equivalent patch from Ville a while ago: http://lists.freedesktop.org/archives/intel-gfx/2013-November/036421.html But on second consideration it's not that evil, and in any case the justification here is more clarity, not allowing crazy userspace. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-21 21:53:48 +08:00
i915_gem_object_flush_cpu_write_domain(obj);
old_write_domain = obj->base.write_domain;
old_read_domains = obj->base.read_domains;
/* It should now be out of any other write domains, and we can update
* the domain values for our changes.
*/
obj->base.write_domain = 0;
obj->base.read_domains |= I915_GEM_DOMAIN_GTT;
trace_i915_gem_object_change_domain(obj,
old_read_domains,
old_write_domain);
return 0;
err_unpin_display:
obj->pin_display--;
return ret;
}
void
i915_gem_object_unpin_from_display_plane(struct drm_i915_gem_object *obj,
const struct i915_ggtt_view *view)
{
if (WARN_ON(obj->pin_display == 0))
return;
i915_gem_object_ggtt_unpin_view(obj, view);
obj->pin_display--;
}
/**
* Moves a single object to the CPU read, and possibly write domain.
* @obj: object to act on
* @write: requesting write or read-only access
*
* This function returns when the move is complete, including waiting on
* flushes to occur.
*/
int
i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj, bool write)
{
uint32_t old_write_domain, old_read_domains;
int ret;
ret = i915_gem_object_wait_rendering(obj, !write);
if (ret)
return ret;
drm/i915: Wait on external rendering for GEM objects When transitioning to the GTT or CPU domain we wait on all rendering from i915 to complete (with the optimisation of allowing concurrent read access by both the GPU and client). We don't yet ensure all rendering from third parties (tracked by implicit fences on the dma-buf) is complete. Since implicitly tracked rendering by third parties will ignore our cache-domain tracking, we have to always wait upon rendering from third-parties when transitioning to direct access to the backing store. We still rely on clients notifying us of cache domain changes (i.e. they need to move to the GTT read or write domain after doing a CPU access before letting the third party render again). v2: This introduces a potential WARN_ON into i915_gem_object_free() as the current i915_vma_unbind() calls i915_gem_object_wait_rendering(). To hit this path we first need to render with the GPU, have a dma-buf attached with an unsignaled fence and then interrupt the wait. It does get fixed later in the series (when i915_vma_unbind() only waits on the active VMA and not all, including third-party, rendering. To offset that risk, use the __i915_vma_unbind_no_wait hack. Testcase: igt/prime_vgem/basic-fence-read Testcase: igt/prime_vgem/basic-fence-mmap Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-8-git-send-email-chris@chris-wilson.co.uk
2016-07-20 16:21:15 +08:00
if (obj->base.write_domain == I915_GEM_DOMAIN_CPU)
return 0;
i915_gem_object_flush_gtt_write_domain(obj);
old_write_domain = obj->base.write_domain;
old_read_domains = obj->base.read_domains;
/* Flush the CPU cache if it's still invalid. */
if ((obj->base.read_domains & I915_GEM_DOMAIN_CPU) == 0) {
i915_gem_clflush_object(obj, false);
obj->base.read_domains |= I915_GEM_DOMAIN_CPU;
}
/* It should now be out of any other write domains, and we can update
* the domain values for our changes.
*/
BUG_ON((obj->base.write_domain & ~I915_GEM_DOMAIN_CPU) != 0);
/* If we're writing through the CPU, then the GPU read domains will
* need to be invalidated at next use.
*/
if (write) {
obj->base.read_domains = I915_GEM_DOMAIN_CPU;
obj->base.write_domain = I915_GEM_DOMAIN_CPU;
}
trace_i915_gem_object_change_domain(obj,
old_read_domains,
old_write_domain);
return 0;
}
/* Throttle our rendering by waiting until the ring has completed our requests
* emitted over 20 msec ago.
*
* Note that if we were to use the current jiffies each time around the loop,
* we wouldn't escape the function with any frames outstanding if the time to
* render a frame was over 20ms.
*
* This should get us reasonable parallelism between CPU and GPU but also
* relatively low latency when blocking on a particular request to finish.
*/
static int
i915_gem_ring_throttle(struct drm_device *dev, struct drm_file *file)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct drm_i915_file_private *file_priv = file->driver_priv;
unsigned long recent_enough = jiffies - DRM_I915_THROTTLE_JIFFIES;
struct drm_i915_gem_request *request, *target = NULL;
int ret;
ret = i915_gem_wait_for_error(&dev_priv->gpu_error);
if (ret)
return ret;
drm/i915: Prevent leaking of -EIO from i915_wait_request() Reporting -EIO from i915_wait_request() has proven very troublematic over the years, with numerous hard-to-reproduce bugs cropping up in the corner case of where a reset occurs and the code wasn't expecting such an error. If the we reset the GPU or have detected a hang and wish to reset the GPU, the request is forcibly complete and the wait broken. Currently, we report either -EAGAIN or -EIO in order for the caller to retreat and restart the wait (if appropriate) after dropping and then reacquiring the struct_mutex (essential to allow the GPU reset to proceed). However, if we take the view that the request is complete (no further work will be done on it by the GPU because it is dead and soon to be reset), then we can proceed with the task at hand and then drop the struct_mutex allowing the reset to occur. This transfers the burden of checking whether it is safe to proceed to the caller, which in all but one instance it is safe - completely eliminating the source of all spurious -EIO. Of note, we only have two API entry points where we expect that userspace can observe an EIO. First is when submitting an execbuf, if the GPU is terminally wedged, then the operation cannot succeed and an -EIO is reported. Secondly, existing userspace uses the throttle ioctl to detect an already wedged GPU before starting using HW acceleration (or to confirm that the GPU is wedged after an error condition). So if the GPU is wedged when the user calls throttle, also report -EIO. v2: Split more carefully the change to i915_wait_request() and assorted ABI from the reset handling. v3: Add a couple of WARN_ON(EIO) to the interruptible modesetting code so that we don't start to leak EIO there in future (and break our hang resistant modesetting). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1460565315-7748-9-git-send-email-chris@chris-wilson.co.uk Link: http://patchwork.freedesktop.org/patch/msgid/1460565315-7748-1-git-send-email-chris@chris-wilson.co.uk
2016-04-14 00:35:08 +08:00
/* ABI: return -EIO if already wedged */
if (i915_terminally_wedged(&dev_priv->gpu_error))
return -EIO;
spin_lock(&file_priv->mm.lock);
list_for_each_entry(request, &file_priv->mm.request_list, client_list) {
if (time_after_eq(request->emitted_jiffies, recent_enough))
break;
drm/i915: Move the request/file and request/pid association to creation time In _i915_add_request(), the request is associated with a userland client. Specifically it is linked to the 'file' structure and the current user process is recorded. One problem here is that the current user process is not necessarily the same as when the request was submitted to the driver. This is especially true when the GPU scheduler arrives and decouples driver submission from hardware submission. Note also that it is only in the case where the add request comes from an execbuff call that there is a client to associate. Any other add request call is kernel only so does not need to do it. This patch moves the client association into a separate function. This is then called from the execbuffer code path itself at a sensible time. It also removes the now redundant 'file' pointer from the add request parameter list. An extra cleanup of the client association is also added to the request clean up code for the eventuality where the request is killed after association but before being submitted (e.g. due to out of memory error somewhere). Once the submission has happened, the request is on the request list and the regular request list removal will clear the association. Note that this still needs to happen at this point in time because the request might be kept floating around much longer (due to someone holding a reference count) and the client should not be worrying about this request after it has been retired. For: VIZ-5115 Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Tomas Elf <tomas.elf@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-30 00:44:12 +08:00
/*
* Note that the request might not have been submitted yet.
* In which case emitted_jiffies will be zero.
*/
if (!request->emitted_jiffies)
continue;
target = request;
}
if (target)
i915_gem_request_get(target);
spin_unlock(&file_priv->mm.lock);
if (target == NULL)
return 0;
ret = i915_wait_request(target, true, NULL, NULL);
i915_gem_request_put(target);
return ret;
}
drm/i915: Prevent negative relocation deltas from wrapping This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-23 14:48:08 +08:00
static bool
i915_vma_misplaced(struct i915_vma *vma, uint32_t alignment, uint64_t flags)
{
struct drm_i915_gem_object *obj = vma->obj;
if (alignment &&
vma->node.start & (alignment - 1))
return true;
if (flags & PIN_MAPPABLE && !obj->map_and_fenceable)
return true;
if (flags & PIN_OFFSET_BIAS &&
vma->node.start < (flags & PIN_OFFSET_MASK))
return true;
drm/i915: Add soft-pinning API for execbuffer Userspace can pass in an offset that it presumes the object is located at. The kernel will then do its utmost to fit the object into that location. The assumption is that userspace is handling its own object locations (for example along with full-ppgtt) and that the kernel will rarely have to make space for the user's requests. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> v2: Fixed incorrect eviction found by Michal Winiarski - fix suggested by Chris Wilson. Fixed incorrect error paths causing crash found by Michal Winiarski. (Not published externally) v3: Rebased because of trivial conflict in object_bind_to_vm. Fixed eviction to allow eviction of soft-pinned objects when another soft-pinned object used by a subsequent execbuffer overlaps reported by Michal Winiarski. (Not published externally) v4: Moved soft-pinned objects to the front of ordered_vmas so that they are pinned first after an address conflict happens to avoid repeated conflicts in rare cases (Suggested by Chris Wilson). Expanded comment on drm_i915_gem_exec_object2.offset to cover this new API. v5: Added I915_PARAM_HAS_EXEC_SOFTPIN parameter for detecting this capability (Kristian). Added check for multiple pinnings on eviction (Akash). Made sure buffers are not considered misplaced without the user specifying EXEC_OBJECT_SUPPORTS_48B_ADDRESS. User must assume responsibility for any addressing workarounds. Updated object2.offset field comment again to clarify NO_RELOC case (Chris). checkpatch cleanup. v6: Trivial rebase on latest drm-intel-nightly v7: Catch attempts to pin above the max virtual address size and return EINVAL (Tvrtko). Decouple EXEC_OBJECT_SUPPORTS_48B_ADDRESS and EXEC_OBJECT_PINNED flags, user must pass both flags in any attempt to pin something at an offset above 4GB (Chris, Daniel Vetter). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Akash Goel <akash.goel@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Zou Nanhai <nanhai.zou@intel.com> Cc: Kristian Høgsberg <hoegsberg@gmail.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Acked-by: PDT Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449575707-20933-1-git-send-email-thomas.daniel@intel.com
2015-12-08 19:55:07 +08:00
if (flags & PIN_OFFSET_FIXED &&
vma->node.start != (flags & PIN_OFFSET_MASK))
return true;
drm/i915: Prevent negative relocation deltas from wrapping This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-23 14:48:08 +08:00
return false;
}
void __i915_vma_set_map_and_fenceable(struct i915_vma *vma)
{
struct drm_i915_gem_object *obj = vma->obj;
bool mappable, fenceable;
u32 fence_size, fence_alignment;
fence_size = i915_gem_get_gtt_size(obj->base.dev,
obj->base.size,
obj->tiling_mode);
fence_alignment = i915_gem_get_gtt_alignment(obj->base.dev,
obj->base.size,
obj->tiling_mode,
true);
fenceable = (vma->node.size == fence_size &&
(vma->node.start & (fence_alignment - 1)) == 0);
mappable = (vma->node.start + fence_size <=
to_i915(obj->base.dev)->ggtt.mappable_end);
obj->map_and_fenceable = mappable && fenceable;
}
static int
i915_gem_object_do_pin(struct drm_i915_gem_object *obj,
struct i915_address_space *vm,
const struct i915_ggtt_view *ggtt_view,
uint32_t alignment,
uint64_t flags)
{
struct drm_i915_private *dev_priv = to_i915(obj->base.dev);
drm/i915: plumb VM into bind/unbind code As alluded to in several patches, and it will be reiterated later... A VMA is an abstraction for a GEM BO bound into an address space. Therefore it stands to reason, that the existing bind, and unbind are the ones which will be the most impacted. This patch implements this, and updates all callers which weren't already updated in the series (because it was too messy). This patch represents the bulk of an earlier, larger patch. I've pulled out a bunch of things by the request of Daniel. The history is preserved for posterity with the email convention of ">" One big change from the original patch aside from a bunch of cropping is I've created an i915_vma_unbind() function. That is because we always have the VMA anyway, and doing an extra lookup is useful. There is a caveat, we retain an i915_gem_object_ggtt_unbind, for the global cases which might not talk in VMAs. > drm/i915: plumb VM into object operations > > This patch was formerly known as: > "drm/i915: Create VMAs (part 3) - plumbing" > > This patch adds a VM argument, bind/unbind, and the object > offset/size/color getters/setters. It preserves the old ggtt helper > functions because things still need, and will continue to need them. > > Some code will still need to be ported over after this. > > v2: Fix purge to pick an object and unbind all vmas > This was doable because of the global bound list change. > > v3: With the commit to actually pin/unpin pages in place, there is no > longer a need to check if unbind succeeded before calling put_pages(). > Make put_pages only BUG() after checking pin count. > > v4: Rebased on top of the new hangcheck work by Mika > plumbed eb_destroy also > Many checkpatch related fixes > > v5: Very large rebase > > v6: > Change BUG_ON to WARN_ON (Daniel) > Rename vm to ggtt in preallocate stolen, since it is always ggtt when > dealing with stolen memory. (Daniel) > list_for_each will short-circuit already (Daniel) > remove superflous space (Daniel) > Use per object list of vmas (Daniel) > Make obj_bound_any() use obj_bound for each vm (Ben) > s/bind_to_gtt/bind_to_vm/ (Ben) > > Fixed up the inactive shrinker. As Daniel noticed the code could > potentially count the same object multiple times. While it's not > possible in the current case, since 1 object can only ever be bound into > 1 address space thus far - we may as well try to get something more > future proof in place now. With a prep patch before this to switch over > to using the bound list + inactive check, we're now able to carry that > forward for every address space an object is bound into. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Rebase on top of the loss of "drm/i915: Cleanup more of VMA in destroy".] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-01 08:00:10 +08:00
struct i915_vma *vma;
unsigned bound;
int ret;
if (WARN_ON(vm == &dev_priv->mm.aliasing_ppgtt->base))
return -ENODEV;
if (WARN_ON(flags & (PIN_GLOBAL | PIN_MAPPABLE) && !i915_is_ggtt(vm)))
return -EINVAL;
drm/i915: plumb VM into bind/unbind code As alluded to in several patches, and it will be reiterated later... A VMA is an abstraction for a GEM BO bound into an address space. Therefore it stands to reason, that the existing bind, and unbind are the ones which will be the most impacted. This patch implements this, and updates all callers which weren't already updated in the series (because it was too messy). This patch represents the bulk of an earlier, larger patch. I've pulled out a bunch of things by the request of Daniel. The history is preserved for posterity with the email convention of ">" One big change from the original patch aside from a bunch of cropping is I've created an i915_vma_unbind() function. That is because we always have the VMA anyway, and doing an extra lookup is useful. There is a caveat, we retain an i915_gem_object_ggtt_unbind, for the global cases which might not talk in VMAs. > drm/i915: plumb VM into object operations > > This patch was formerly known as: > "drm/i915: Create VMAs (part 3) - plumbing" > > This patch adds a VM argument, bind/unbind, and the object > offset/size/color getters/setters. It preserves the old ggtt helper > functions because things still need, and will continue to need them. > > Some code will still need to be ported over after this. > > v2: Fix purge to pick an object and unbind all vmas > This was doable because of the global bound list change. > > v3: With the commit to actually pin/unpin pages in place, there is no > longer a need to check if unbind succeeded before calling put_pages(). > Make put_pages only BUG() after checking pin count. > > v4: Rebased on top of the new hangcheck work by Mika > plumbed eb_destroy also > Many checkpatch related fixes > > v5: Very large rebase > > v6: > Change BUG_ON to WARN_ON (Daniel) > Rename vm to ggtt in preallocate stolen, since it is always ggtt when > dealing with stolen memory. (Daniel) > list_for_each will short-circuit already (Daniel) > remove superflous space (Daniel) > Use per object list of vmas (Daniel) > Make obj_bound_any() use obj_bound for each vm (Ben) > s/bind_to_gtt/bind_to_vm/ (Ben) > > Fixed up the inactive shrinker. As Daniel noticed the code could > potentially count the same object multiple times. While it's not > possible in the current case, since 1 object can only ever be bound into > 1 address space thus far - we may as well try to get something more > future proof in place now. With a prep patch before this to switch over > to using the bound list + inactive check, we're now able to carry that > forward for every address space an object is bound into. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Rebase on top of the loss of "drm/i915: Cleanup more of VMA in destroy".] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-01 08:00:10 +08:00
if (WARN_ON((flags & (PIN_MAPPABLE | PIN_GLOBAL)) == PIN_MAPPABLE))
return -EINVAL;
if (WARN_ON(i915_is_ggtt(vm) != !!ggtt_view))
return -EINVAL;
vma = ggtt_view ? i915_gem_obj_to_ggtt_view(obj, ggtt_view) :
i915_gem_obj_to_vma(obj, vm);
drm/i915: plumb VM into bind/unbind code As alluded to in several patches, and it will be reiterated later... A VMA is an abstraction for a GEM BO bound into an address space. Therefore it stands to reason, that the existing bind, and unbind are the ones which will be the most impacted. This patch implements this, and updates all callers which weren't already updated in the series (because it was too messy). This patch represents the bulk of an earlier, larger patch. I've pulled out a bunch of things by the request of Daniel. The history is preserved for posterity with the email convention of ">" One big change from the original patch aside from a bunch of cropping is I've created an i915_vma_unbind() function. That is because we always have the VMA anyway, and doing an extra lookup is useful. There is a caveat, we retain an i915_gem_object_ggtt_unbind, for the global cases which might not talk in VMAs. > drm/i915: plumb VM into object operations > > This patch was formerly known as: > "drm/i915: Create VMAs (part 3) - plumbing" > > This patch adds a VM argument, bind/unbind, and the object > offset/size/color getters/setters. It preserves the old ggtt helper > functions because things still need, and will continue to need them. > > Some code will still need to be ported over after this. > > v2: Fix purge to pick an object and unbind all vmas > This was doable because of the global bound list change. > > v3: With the commit to actually pin/unpin pages in place, there is no > longer a need to check if unbind succeeded before calling put_pages(). > Make put_pages only BUG() after checking pin count. > > v4: Rebased on top of the new hangcheck work by Mika > plumbed eb_destroy also > Many checkpatch related fixes > > v5: Very large rebase > > v6: > Change BUG_ON to WARN_ON (Daniel) > Rename vm to ggtt in preallocate stolen, since it is always ggtt when > dealing with stolen memory. (Daniel) > list_for_each will short-circuit already (Daniel) > remove superflous space (Daniel) > Use per object list of vmas (Daniel) > Make obj_bound_any() use obj_bound for each vm (Ben) > s/bind_to_gtt/bind_to_vm/ (Ben) > > Fixed up the inactive shrinker. As Daniel noticed the code could > potentially count the same object multiple times. While it's not > possible in the current case, since 1 object can only ever be bound into > 1 address space thus far - we may as well try to get something more > future proof in place now. With a prep patch before this to switch over > to using the bound list + inactive check, we're now able to carry that > forward for every address space an object is bound into. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Rebase on top of the loss of "drm/i915: Cleanup more of VMA in destroy".] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-01 08:00:10 +08:00
if (vma) {
if (WARN_ON(vma->pin_count == DRM_I915_GEM_OBJECT_MAX_PIN_COUNT))
return -EBUSY;
drm/i915: Prevent negative relocation deltas from wrapping This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-23 14:48:08 +08:00
if (i915_vma_misplaced(vma, alignment, flags)) {
WARN(vma->pin_count,
"bo is already pinned in %s with incorrect alignment:"
" offset=%08x %08x, req.alignment=%x, req.map_and_fenceable=%d,"
" obj->map_and_fenceable=%d\n",
ggtt_view ? "ggtt" : "ppgtt",
upper_32_bits(vma->node.start),
lower_32_bits(vma->node.start),
drm/i915: Infrastructure for supporting different GGTT views per object Things like reliable GGTT mappings and mirrored 2d-on-3d display will need to map objects into the same address space multiple times. Added a GGTT view concept and linked it with the VMA to distinguish between multiple instances per address space. New objects and GEM functions which do not take this new view as a parameter assume the default of zero (I915_GGTT_VIEW_NORMAL) which preserves the previous behaviour. This now means that objects can have multiple VMA entries so the code which assumed there will only be one also had to be modified. Alternative GGTT views are supposed to borrow DMA addresses from obj->pages which is DMA mapped on first VMA instantiation and unmapped on the last one going away. v2: * Removed per view special casing in i915_gem_ggtt_prepare / finish_object in favour of creating and destroying DMA mappings on first VMA instantiation and last VMA destruction. (Daniel Vetter) * Simplified i915_vma_unbind which does not need to count the GGTT views. (Daniel Vetter) * Also moved obj->map_and_fenceable reset under the same check. * Checkpatch cleanups. v3: * Only retire objects once the last VMA is unbound. v4: * Keep scatter-gather table for alternative views persistent for the lifetime of the VMA. * Propagate binding errors to callers and handle appropriately. v5: * Explicitly look for normal GGTT view in i915_gem_obj_bound to align usage in i915_gem_object_ggtt_unpin. (Michel Thierry) * Change to single if statement in i915_gem_obj_to_ggtt. (Michel Thierry) * Removed stray semi-colon in i915_gem_object_set_cache_level. For: VIZ-4544 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Michel Thierry <michel.thierry@intel.com> [danvet: Drop hunk from i915_gem_shrink since it's just prettification but upsets a __must_check warning.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-11 01:27:58 +08:00
alignment,
drm/i915: Prevent negative relocation deltas from wrapping This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-23 14:48:08 +08:00
!!(flags & PIN_MAPPABLE),
obj->map_and_fenceable);
drm/i915: plumb VM into bind/unbind code As alluded to in several patches, and it will be reiterated later... A VMA is an abstraction for a GEM BO bound into an address space. Therefore it stands to reason, that the existing bind, and unbind are the ones which will be the most impacted. This patch implements this, and updates all callers which weren't already updated in the series (because it was too messy). This patch represents the bulk of an earlier, larger patch. I've pulled out a bunch of things by the request of Daniel. The history is preserved for posterity with the email convention of ">" One big change from the original patch aside from a bunch of cropping is I've created an i915_vma_unbind() function. That is because we always have the VMA anyway, and doing an extra lookup is useful. There is a caveat, we retain an i915_gem_object_ggtt_unbind, for the global cases which might not talk in VMAs. > drm/i915: plumb VM into object operations > > This patch was formerly known as: > "drm/i915: Create VMAs (part 3) - plumbing" > > This patch adds a VM argument, bind/unbind, and the object > offset/size/color getters/setters. It preserves the old ggtt helper > functions because things still need, and will continue to need them. > > Some code will still need to be ported over after this. > > v2: Fix purge to pick an object and unbind all vmas > This was doable because of the global bound list change. > > v3: With the commit to actually pin/unpin pages in place, there is no > longer a need to check if unbind succeeded before calling put_pages(). > Make put_pages only BUG() after checking pin count. > > v4: Rebased on top of the new hangcheck work by Mika > plumbed eb_destroy also > Many checkpatch related fixes > > v5: Very large rebase > > v6: > Change BUG_ON to WARN_ON (Daniel) > Rename vm to ggtt in preallocate stolen, since it is always ggtt when > dealing with stolen memory. (Daniel) > list_for_each will short-circuit already (Daniel) > remove superflous space (Daniel) > Use per object list of vmas (Daniel) > Make obj_bound_any() use obj_bound for each vm (Ben) > s/bind_to_gtt/bind_to_vm/ (Ben) > > Fixed up the inactive shrinker. As Daniel noticed the code could > potentially count the same object multiple times. While it's not > possible in the current case, since 1 object can only ever be bound into > 1 address space thus far - we may as well try to get something more > future proof in place now. With a prep patch before this to switch over > to using the bound list + inactive check, we're now able to carry that > forward for every address space an object is bound into. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Rebase on top of the loss of "drm/i915: Cleanup more of VMA in destroy".] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-01 08:00:10 +08:00
ret = i915_vma_unbind(vma);
if (ret)
return ret;
vma = NULL;
}
}
bound = vma ? vma->bound : 0;
if (vma == NULL || !drm_mm_node_allocated(&vma->node)) {
vma = i915_gem_object_bind_to_vm(obj, vm, ggtt_view, alignment,
flags);
if (IS_ERR(vma))
return PTR_ERR(vma);
} else {
ret = i915_vma_bind(vma, obj->cache_level, flags);
drm/i915: Infrastructure for supporting different GGTT views per object Things like reliable GGTT mappings and mirrored 2d-on-3d display will need to map objects into the same address space multiple times. Added a GGTT view concept and linked it with the VMA to distinguish between multiple instances per address space. New objects and GEM functions which do not take this new view as a parameter assume the default of zero (I915_GGTT_VIEW_NORMAL) which preserves the previous behaviour. This now means that objects can have multiple VMA entries so the code which assumed there will only be one also had to be modified. Alternative GGTT views are supposed to borrow DMA addresses from obj->pages which is DMA mapped on first VMA instantiation and unmapped on the last one going away. v2: * Removed per view special casing in i915_gem_ggtt_prepare / finish_object in favour of creating and destroying DMA mappings on first VMA instantiation and last VMA destruction. (Daniel Vetter) * Simplified i915_vma_unbind which does not need to count the GGTT views. (Daniel Vetter) * Also moved obj->map_and_fenceable reset under the same check. * Checkpatch cleanups. v3: * Only retire objects once the last VMA is unbound. v4: * Keep scatter-gather table for alternative views persistent for the lifetime of the VMA. * Propagate binding errors to callers and handle appropriately. v5: * Explicitly look for normal GGTT view in i915_gem_obj_bound to align usage in i915_gem_object_ggtt_unpin. (Michel Thierry) * Change to single if statement in i915_gem_obj_to_ggtt. (Michel Thierry) * Removed stray semi-colon in i915_gem_object_set_cache_level. For: VIZ-4544 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Michel Thierry <michel.thierry@intel.com> [danvet: Drop hunk from i915_gem_shrink since it's just prettification but upsets a __must_check warning.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-11 01:27:58 +08:00
if (ret)
return ret;
}
if (ggtt_view && ggtt_view->type == I915_GGTT_VIEW_NORMAL &&
(bound ^ vma->bound) & GLOBAL_BIND) {
__i915_vma_set_map_and_fenceable(vma);
WARN_ON(flags & PIN_MAPPABLE && !obj->map_and_fenceable);
}
vma->pin_count++;
return 0;
}
int
i915_gem_object_pin(struct drm_i915_gem_object *obj,
struct i915_address_space *vm,
uint32_t alignment,
uint64_t flags)
{
return i915_gem_object_do_pin(obj, vm,
i915_is_ggtt(vm) ? &i915_ggtt_view_normal : NULL,
alignment, flags);
}
int
i915_gem_object_ggtt_pin(struct drm_i915_gem_object *obj,
const struct i915_ggtt_view *view,
uint32_t alignment,
uint64_t flags)
{
struct drm_device *dev = obj->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct i915_ggtt *ggtt = &dev_priv->ggtt;
BUG_ON(!view);
return i915_gem_object_do_pin(obj, &ggtt->base, view,
alignment, flags | PIN_GLOBAL);
}
void
i915_gem_object_ggtt_unpin_view(struct drm_i915_gem_object *obj,
const struct i915_ggtt_view *view)
{
struct i915_vma *vma = i915_gem_obj_to_ggtt_view(obj, view);
WARN_ON(vma->pin_count == 0);
WARN_ON(!i915_gem_obj_ggtt_bound_view(obj, view));
--vma->pin_count;
}
int
i915_gem_busy_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_busy *args = data;
struct drm_i915_gem_object *obj;
int ret;
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
obj = i915_gem_object_lookup(file, args->handle);
if (!obj) {
ret = -ENOENT;
goto unlock;
}
/* Count all active objects as busy, even if they are currently not used
* by the gpu. Users of this interface expect objects to eventually
* become non-busy without any further actions.
*/
args->busy = 0;
if (obj->active) {
struct drm_i915_gem_request *req;
int i;
for (i = 0; i < I915_NUM_ENGINES; i++) {
req = i915_gem_active_peek(&obj->last_read[i],
&obj->base.dev->struct_mutex);
if (req)
args->busy |= 1 << (16 + req->engine->exec_id);
}
req = i915_gem_active_peek(&obj->last_write,
&obj->base.dev->struct_mutex);
if (req)
args->busy |= req->engine->exec_id;
}
i915_gem_object_put(obj);
unlock:
mutex_unlock(&dev->struct_mutex);
return ret;
}
int
i915_gem_throttle_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
return i915_gem_ring_throttle(dev, file_priv);
}
int
i915_gem_madvise_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct drm_i915_gem_madvise *args = data;
struct drm_i915_gem_object *obj;
int ret;
switch (args->madv) {
case I915_MADV_DONTNEED:
case I915_MADV_WILLNEED:
break;
default:
return -EINVAL;
}
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
obj = i915_gem_object_lookup(file_priv, args->handle);
if (!obj) {
ret = -ENOENT;
goto unlock;
}
if (i915_gem_obj_is_pinned(obj)) {
ret = -EINVAL;
goto out;
}
if (obj->pages &&
obj->tiling_mode != I915_TILING_NONE &&
dev_priv->quirks & QUIRK_PIN_SWIZZLED_PAGES) {
if (obj->madv == I915_MADV_WILLNEED)
i915_gem_object_unpin_pages(obj);
if (args->madv == I915_MADV_WILLNEED)
i915_gem_object_pin_pages(obj);
}
if (obj->madv != __I915_MADV_PURGED)
obj->madv = args->madv;
drm/i915: Track unbound pages When dealing with a working set larger than the GATT, or even the mappable aperture when touching through the GTT, we end up with evicting objects only to rebind them at a new offset again later. Moving an object into and out of the GTT requires clflushing the pages, thus causing a double-clflush penalty for rebinding. To avoid having to clflush on rebinding, we can track the pages as they are evicted from the GTT and only relinquish those pages on memory pressure. As usual, if it were not for the handling of out-of-memory condition and having to manually shrink our own bo caches, it would be a net reduction of code. Alas. Note: The patch also contains a few changes to the last-hope evict_everything logic in i916_gem_execbuffer.c - we no longer try to only evict the purgeable stuff in a first try (since that's superflous and only helps in OOM corner-cases, not fragmented-gtt trashing situations). Also, the extraction of the get_pages retry loop from bind_to_gtt (and other callsites) to get_pages should imo have been a separate patch. v2: Ditch the newly added put_pages (for unbound objects only) in i915_gem_reset. A quick irc discussion hasn't revealed any important reason for this, so if we need this, I'd like to have a git blame'able explanation for it. v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Split out code movements and rant a bit in the commit message with a few Notes. Done v2] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20 17:40:46 +08:00
/* if the object is no longer attached, discard its backing storage */
if (obj->madv == I915_MADV_DONTNEED && obj->pages == NULL)
i915_gem_object_truncate(obj);
args->retained = obj->madv != __I915_MADV_PURGED;
out:
i915_gem_object_put(obj);
unlock:
mutex_unlock(&dev->struct_mutex);
return ret;
}
void i915_gem_object_init(struct drm_i915_gem_object *obj,
const struct drm_i915_gem_object_ops *ops)
{
drm/i915: Implement inter-engine read-read optimisations Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-27 20:41:17 +08:00
int i;
INIT_LIST_HEAD(&obj->global_list);
for (i = 0; i < I915_NUM_ENGINES; i++)
drm/i915: Refactor activity tracking for requests With the introduction of requests, we amplified the number of atomic refcounted objects we use and update every execbuffer; from none to several references, and a set of references that need to be changed. We also introduced interesting side-effects in the order of retiring requests and objects. Instead of independently tracking the last request for an object, track the active objects for each request. The object will reside in the buffer list of its most recent active request and so we reduce the kref interchange to a list_move. Now retirements are entirely driven by the request, dramatically simplifying activity tracking on the object themselves, and removing the ambiguity between retiring objects and retiring requests. Furthermore with the consolidation of managing the activity tracking centrally, we can look forward to using RCU to enable lockless lookup of the current active requests for an object. In the future, we will be able to query the status or wait upon rendering to an object without even touching the struct_mutex BKL. All told, less code, simpler and faster, and more extensible. v2: Add a typedef for the function pointer for convenience later. v3: Make the noop retirement callback explicit. Allow passing NULL to the init_request_active() which is expanded to a common noop function. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-16-git-send-email-chris@chris-wilson.co.uk
2016-08-04 14:52:35 +08:00
init_request_active(&obj->last_read[i],
i915_gem_object_retire__read);
init_request_active(&obj->last_write,
i915_gem_object_retire__write);
init_request_active(&obj->last_fence, NULL);
INIT_LIST_HEAD(&obj->obj_exec_link);
INIT_LIST_HEAD(&obj->vma_list);
INIT_LIST_HEAD(&obj->batch_pool_link);
obj->ops = ops;
obj->fence_reg = I915_FENCE_REG_NONE;
obj->madv = I915_MADV_WILLNEED;
i915_gem_info_add_obj(to_i915(obj->base.dev), obj->base.size);
}
static const struct drm_i915_gem_object_ops i915_gem_object_ops = {
.flags = I915_GEM_OBJECT_HAS_STRUCT_PAGE,
.get_pages = i915_gem_object_get_pages_gtt,
.put_pages = i915_gem_object_put_pages_gtt,
};
struct drm_i915_gem_object *i915_gem_object_create(struct drm_device *dev,
size_t size)
{
struct drm_i915_gem_object *obj;
struct address_space *mapping;
gfp_t mask;
int ret;
obj = i915_gem_object_alloc(dev);
if (obj == NULL)
return ERR_PTR(-ENOMEM);
ret = drm_gem_object_init(dev, &obj->base, size);
if (ret)
goto fail;
mask = GFP_HIGHUSER | __GFP_RECLAIMABLE;
if (IS_CRESTLINE(dev) || IS_BROADWATER(dev)) {
/* 965gm cannot relocate objects above 4GiB. */
mask &= ~__GFP_HIGHMEM;
mask |= __GFP_DMA32;
}
mapping = file_inode(obj->base.filp)->i_mapping;
mapping_set_gfp_mask(mapping, mask);
i915_gem_object_init(obj, &i915_gem_object_ops);
obj->base.write_domain = I915_GEM_DOMAIN_CPU;
obj->base.read_domains = I915_GEM_DOMAIN_CPU;
if (HAS_LLC(dev)) {
/* On some devices, we can have the GPU use the LLC (the CPU
* cache) for about a 10% performance improvement
* compared to uncached. Graphics requests other than
* display scanout are coherent with the CPU in
* accessing this cache. This means in this mode we
* don't need to clflush on the CPU side, and on the
* GPU side we only need to flush internal caches to
* get data visible to the CPU.
*
* However, we maintain the display planes as UC, and so
* need to rebind when first used as such.
*/
obj->cache_level = I915_CACHE_LLC;
} else
obj->cache_level = I915_CACHE_NONE;
trace_i915_gem_object_create(obj);
return obj;
fail:
i915_gem_object_free(obj);
return ERR_PTR(ret);
}
static bool discard_backing_storage(struct drm_i915_gem_object *obj)
{
/* If we are the last user of the backing storage (be it shmemfs
* pages or stolen etc), we know that the pages are going to be
* immediately released. In this case, we can then skip copying
* back the contents from the GPU.
*/
if (obj->madv != I915_MADV_WILLNEED)
return false;
if (obj->base.filp == NULL)
return true;
/* At first glance, this looks racy, but then again so would be
* userspace racing mmap against close. However, the first external
* reference to the filp can only be obtained through the
* i915_gem_mmap_ioctl() which safeguards us against the user
* acquiring such a reference whilst we are in the middle of
* freeing the object.
*/
return atomic_long_read(&obj->base.filp->f_count) == 1;
}
void i915_gem_free_object(struct drm_gem_object *gem_obj)
{
struct drm_i915_gem_object *obj = to_intel_bo(gem_obj);
struct drm_device *dev = obj->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
drm/i915: plumb VM into bind/unbind code As alluded to in several patches, and it will be reiterated later... A VMA is an abstraction for a GEM BO bound into an address space. Therefore it stands to reason, that the existing bind, and unbind are the ones which will be the most impacted. This patch implements this, and updates all callers which weren't already updated in the series (because it was too messy). This patch represents the bulk of an earlier, larger patch. I've pulled out a bunch of things by the request of Daniel. The history is preserved for posterity with the email convention of ">" One big change from the original patch aside from a bunch of cropping is I've created an i915_vma_unbind() function. That is because we always have the VMA anyway, and doing an extra lookup is useful. There is a caveat, we retain an i915_gem_object_ggtt_unbind, for the global cases which might not talk in VMAs. > drm/i915: plumb VM into object operations > > This patch was formerly known as: > "drm/i915: Create VMAs (part 3) - plumbing" > > This patch adds a VM argument, bind/unbind, and the object > offset/size/color getters/setters. It preserves the old ggtt helper > functions because things still need, and will continue to need them. > > Some code will still need to be ported over after this. > > v2: Fix purge to pick an object and unbind all vmas > This was doable because of the global bound list change. > > v3: With the commit to actually pin/unpin pages in place, there is no > longer a need to check if unbind succeeded before calling put_pages(). > Make put_pages only BUG() after checking pin count. > > v4: Rebased on top of the new hangcheck work by Mika > plumbed eb_destroy also > Many checkpatch related fixes > > v5: Very large rebase > > v6: > Change BUG_ON to WARN_ON (Daniel) > Rename vm to ggtt in preallocate stolen, since it is always ggtt when > dealing with stolen memory. (Daniel) > list_for_each will short-circuit already (Daniel) > remove superflous space (Daniel) > Use per object list of vmas (Daniel) > Make obj_bound_any() use obj_bound for each vm (Ben) > s/bind_to_gtt/bind_to_vm/ (Ben) > > Fixed up the inactive shrinker. As Daniel noticed the code could > potentially count the same object multiple times. While it's not > possible in the current case, since 1 object can only ever be bound into > 1 address space thus far - we may as well try to get something more > future proof in place now. With a prep patch before this to switch over > to using the bound list + inactive check, we're now able to carry that > forward for every address space an object is bound into. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Rebase on top of the loss of "drm/i915: Cleanup more of VMA in destroy".] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-01 08:00:10 +08:00
struct i915_vma *vma, *next;
intel_runtime_pm_get(dev_priv);
trace_i915_gem_object_destroy(obj);
/* All file-owned VMA should have been released by this point through
* i915_gem_close_object(), or earlier by i915_gem_context_close().
* However, the object may also be bound into the global GTT (e.g.
* older GPUs without per-process support, or for direct access through
* the GTT either for the user or for scanout). Those VMA still need to
* unbound now.
*/
list_for_each_entry_safe(vma, next, &obj->vma_list, obj_link) {
GEM_BUG_ON(!vma->is_ggtt);
GEM_BUG_ON(i915_vma_is_active(vma));
vma->pin_count = 0;
i915_vma_close(vma);
}
GEM_BUG_ON(obj->bind_count);
/* Stolen objects don't hold a ref, but do hold pin count. Fix that up
* before progressing. */
if (obj->stolen)
i915_gem_object_unpin_pages(obj);
drm/i915: Introduce accurate frontbuffer tracking So from just a quick look we seem to have enough information to accurately figure out whether a given gem bo is used as a frontbuffer and where exactly: We have obj->pin_count as a first check with no false negatives and only negligible false positives. And then we can just walk the modeset objects and figure out where exactly a buffer is used as scanout. Except that we can't due to locking order: If we already hold dev->struct_mutex we can't acquire any modeset locks, so could potential chase freed pointers and other evil stuff. So we need something else. For that introduce a new set of bits obj->frontbuffer_bits to track where a buffer object is used. That we can then chase without grabbing any modeset locks. Of course the consumers of this (DRRS, PSR, FBC, ...) still need to be able to do their magic both when called from modeset and from gem code. But that can be easily achieved by adding locks for these specific subsystems which always nest within either kms or gem locking. This patch just adds the relevant update code to all places. Note that if we ever support multi-planar scanout targets then we need one frontbuffer tracking bit per attachment point that we expose to userspace. v2: - Fix more oopsen. Oops. - WARN if we leak obj->frontbuffer_bits when freeing a gem buffer. Fix the bugs this brought to light. - s/update_frontbuffer_bits/update_fb_bits/. More consistent with the fb tracking functions (fb for gem object, frontbuffer for raw bits). And the function name was way too long. v3: Size obj->frontbuffer_bits correctly so that all pipes fit in. v4: Don't update fb bits in set_base on failure. Noticed by Chris. v5: s/i915_gem_update_fb_bits/i915_gem_track_fb/ Also remove a few local enum pipe variables which are now no longer needed to make the function arguments no drop over the 80 char limit. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-19 05:28:09 +08:00
WARN_ON(obj->frontbuffer_bits);
if (obj->pages && obj->madv == I915_MADV_WILLNEED &&
dev_priv->quirks & QUIRK_PIN_SWIZZLED_PAGES &&
obj->tiling_mode != I915_TILING_NONE)
i915_gem_object_unpin_pages(obj);
if (WARN_ON(obj->pages_pin_count))
obj->pages_pin_count = 0;
if (discard_backing_storage(obj))
obj->madv = I915_MADV_DONTNEED;
i915_gem_object_put_pages(obj);
BUG_ON(obj->pages);
if (obj->base.import_attach)
drm_prime_gem_destroy(&obj->base, NULL);
drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-16 21:22:37 +08:00
if (obj->ops->release)
obj->ops->release(obj);
drm_gem_object_release(&obj->base);
i915_gem_info_remove_obj(dev_priv, obj->base.size);
kfree(obj->bit_17);
i915_gem_object_free(obj);
intel_runtime_pm_put(dev_priv);
}
struct i915_vma *i915_gem_obj_to_vma(struct drm_i915_gem_object *obj,
struct i915_address_space *vm)
{
struct i915_vma *vma;
list_for_each_entry(vma, &obj->vma_list, obj_link) {
if (vma->ggtt_view.type == I915_GGTT_VIEW_NORMAL &&
vma->vm == vm)
return vma;
}
return NULL;
}
struct i915_vma *i915_gem_obj_to_ggtt_view(struct drm_i915_gem_object *obj,
const struct i915_ggtt_view *view)
{
struct i915_vma *vma;
GEM_BUG_ON(!view);
list_for_each_entry(vma, &obj->vma_list, obj_link)
if (vma->is_ggtt && i915_ggtt_view_equal(&vma->ggtt_view, view))
return vma;
return NULL;
}
static void
i915_gem_stop_engines(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_engine_cs *engine;
for_each_engine(engine, dev_priv)
dev_priv->gt.stop_engine(engine);
}
int
i915_gem_suspend(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
int ret = 0;
intel_suspend_gt_powersave(dev_priv);
mutex_lock(&dev->struct_mutex);
/* We have to flush all the executing contexts to main memory so
* that they can saved in the hibernation image. To ensure the last
* context image is coherent, we have to switch away from it. That
* leaves the dev_priv->kernel_context still active when
* we actually suspend, and its image in memory may not match the GPU
* state. Fortunately, the kernel_context is disposable and we do
* not rely on its state.
*/
ret = i915_gem_switch_to_kernel_context(dev_priv);
if (ret)
goto err;
ret = i915_gem_wait_for_idle(dev_priv);
if (ret)
goto err;
i915_gem_retire_requests(dev_priv);
/* Note that rather than stopping the engines, all we have to do
* is assert that every RING_HEAD == RING_TAIL (all execution complete)
* and similar for all logical context images (to ensure they are
* all ready for hibernation).
*/
i915_gem_stop_engines(dev);
i915_gem_context_lost(dev_priv);
mutex_unlock(&dev->struct_mutex);
cancel_delayed_work_sync(&dev_priv->gpu_error.hangcheck_work);
cancel_delayed_work_sync(&dev_priv->gt.retire_work);
flush_delayed_work(&dev_priv->gt.idle_work);
/* Assert that we sucessfully flushed all the work and
* reset the GPU back to its idle, low power state.
*/
WARN_ON(dev_priv->gt.awake);
return 0;
err:
mutex_unlock(&dev->struct_mutex);
return ret;
}
void i915_gem_resume(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
mutex_lock(&dev->struct_mutex);
i915_gem_restore_gtt_mappings(dev);
/* As we didn't flush the kernel context before suspend, we cannot
* guarantee that the context image is complete. So let's just reset
* it and start again.
*/
if (i915.enable_execlists)
intel_lr_context_reset(dev_priv, dev_priv->kernel_context);
mutex_unlock(&dev->struct_mutex);
}
void i915_gem_init_swizzling(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
if (INTEL_INFO(dev)->gen < 5 ||
dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_NONE)
return;
I915_WRITE(DISP_ARB_CTL, I915_READ(DISP_ARB_CTL) |
DISP_TILE_SURFACE_SWIZZLING);
if (IS_GEN5(dev))
return;
I915_WRITE(TILECTL, I915_READ(TILECTL) | TILECTL_SWZCTL);
if (IS_GEN6(dev))
I915_WRITE(ARB_MODE, _MASKED_BIT_ENABLE(ARB_MODE_SWIZZLE_SNB));
else if (IS_GEN7(dev))
I915_WRITE(ARB_MODE, _MASKED_BIT_ENABLE(ARB_MODE_SWIZZLE_IVB));
else if (IS_GEN8(dev))
I915_WRITE(GAMTARBMODE, _MASKED_BIT_ENABLE(ARB_MODE_SWIZZLE_BDW));
else
BUG();
}
static void init_unused_ring(struct drm_device *dev, u32 base)
{
struct drm_i915_private *dev_priv = to_i915(dev);
I915_WRITE(RING_CTL(base), 0);
I915_WRITE(RING_HEAD(base), 0);
I915_WRITE(RING_TAIL(base), 0);
I915_WRITE(RING_START(base), 0);
}
static void init_unused_rings(struct drm_device *dev)
{
if (IS_I830(dev)) {
init_unused_ring(dev, PRB1_BASE);
init_unused_ring(dev, SRB0_BASE);
init_unused_ring(dev, SRB1_BASE);
init_unused_ring(dev, SRB2_BASE);
init_unused_ring(dev, SRB3_BASE);
} else if (IS_GEN2(dev)) {
init_unused_ring(dev, SRB0_BASE);
init_unused_ring(dev, SRB1_BASE);
} else if (IS_GEN3(dev)) {
init_unused_ring(dev, PRB1_BASE);
init_unused_ring(dev, PRB2_BASE);
}
}
int
i915_gem_init_hw(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_engine_cs *engine;
int ret;
/* Double layer security blanket, see i915_gem_init() */
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
if (HAS_EDRAM(dev) && INTEL_GEN(dev_priv) < 9)
I915_WRITE(HSW_IDICR, I915_READ(HSW_IDICR) | IDIHASHMSK(0xf));
if (IS_HASWELL(dev))
I915_WRITE(MI_PREDICATE_RESULT_2, IS_HSW_GT3(dev) ?
LOWER_SLICE_ENABLED : LOWER_SLICE_DISABLED);
if (HAS_PCH_NOP(dev)) {
if (IS_IVYBRIDGE(dev)) {
u32 temp = I915_READ(GEN7_MSG_CTL);
temp &= ~(WAIT_FOR_PCH_FLR_ACK | WAIT_FOR_PCH_RESET_ACK);
I915_WRITE(GEN7_MSG_CTL, temp);
} else if (INTEL_INFO(dev)->gen >= 7) {
u32 temp = I915_READ(HSW_NDE_RSTWRN_OPT);
temp &= ~RESET_PCH_HANDSHAKE_ENABLE;
I915_WRITE(HSW_NDE_RSTWRN_OPT, temp);
}
}
i915_gem_init_swizzling(dev);
/*
* At least 830 can leave some of the unused rings
* "active" (ie. head != tail) after resume which
* will prevent c3 entry. Makes sure all unused rings
* are totally idle.
*/
init_unused_rings(dev);
BUG_ON(!dev_priv->kernel_context);
ret = i915_ppgtt_init_hw(dev);
if (ret) {
DRM_ERROR("PPGTT enable HW failed %d\n", ret);
goto out;
}
/* Need to do basic initialisation of all rings first: */
for_each_engine(engine, dev_priv) {
ret = engine->init_hw(engine);
if (ret)
goto out;
}
intel_mocs_init_l3cc_table(dev);
/* We can't enable contexts until all firmware is loaded */
ret = intel_guc_setup(dev);
if (ret)
goto out;
out:
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
return ret;
}
bool intel_sanitize_semaphores(struct drm_i915_private *dev_priv, int value)
{
if (INTEL_INFO(dev_priv)->gen < 6)
return false;
/* TODO: make semaphores and Execlists play nicely together */
if (i915.enable_execlists)
return false;
if (value >= 0)
return value;
#ifdef CONFIG_INTEL_IOMMU
/* Enable semaphores on SNB when IO remapping is off */
if (INTEL_INFO(dev_priv)->gen == 6 && intel_iommu_gfx_mapped)
return false;
#endif
return true;
}
int i915_gem_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
int ret;
mutex_lock(&dev->struct_mutex);
if (!i915.enable_execlists) {
dev_priv->gt.cleanup_engine = intel_engine_cleanup;
dev_priv->gt.stop_engine = intel_engine_stop;
} else {
dev_priv->gt.cleanup_engine = intel_logical_ring_cleanup;
dev_priv->gt.stop_engine = intel_logical_ring_stop;
}
/* This is just a security blanket to placate dragons.
* On some systems, we very sporadically observe that the first TLBs
* used by the CS may be stale, despite us poking the TLB reset. If
* we hold the forcewake during initialisation these problems
* just magically go away.
*/
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
i915_gem_init_userptr(dev_priv);
ret = i915_gem_init_ggtt(dev_priv);
if (ret)
goto out_unlock;
ret = i915_gem_context_init(dev);
if (ret)
goto out_unlock;
ret = intel_engines_init(dev);
if (ret)
goto out_unlock;
ret = i915_gem_init_hw(dev);
if (ret == -EIO) {
/* Allow engine initialisation to fail by marking the GPU as
* wedged. But we only want to do this where the GPU is angry,
* for all other failure, such as an allocation failure, bail.
*/
DRM_ERROR("Failed to initialize GPU, declaring it wedged\n");
atomic_or(I915_WEDGED, &dev_priv->gpu_error.reset_counter);
ret = 0;
}
out_unlock:
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
mutex_unlock(&dev->struct_mutex);
return ret;
}
void
i915_gem_cleanup_engines(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_engine_cs *engine;
for_each_engine(engine, dev_priv)
dev_priv->gt.cleanup_engine(engine);
}
static void
init_engine_lists(struct intel_engine_cs *engine)
{
INIT_LIST_HEAD(&engine->request_list);
}
void
i915_gem_load_init_fences(struct drm_i915_private *dev_priv)
{
struct drm_device *dev = &dev_priv->drm;
if (INTEL_INFO(dev_priv)->gen >= 7 && !IS_VALLEYVIEW(dev_priv) &&
!IS_CHERRYVIEW(dev_priv))
dev_priv->num_fence_regs = 32;
else if (INTEL_INFO(dev_priv)->gen >= 4 || IS_I945G(dev_priv) ||
IS_I945GM(dev_priv) || IS_G33(dev_priv))
dev_priv->num_fence_regs = 16;
else
dev_priv->num_fence_regs = 8;
if (intel_vgpu_active(dev_priv))
dev_priv->num_fence_regs =
I915_READ(vgtif_reg(avail_rs.fence_num));
/* Initialize fence registers to zero */
i915_gem_restore_fences(dev);
i915_gem_detect_bit_6_swizzle(dev);
}
void
i915_gem_load_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
int i;
dev_priv->objects =
kmem_cache_create("i915_gem_object",
sizeof(struct drm_i915_gem_object), 0,
SLAB_HWCACHE_ALIGN,
NULL);
dev_priv->vmas =
kmem_cache_create("i915_gem_vma",
sizeof(struct i915_vma), 0,
SLAB_HWCACHE_ALIGN,
NULL);
dev_priv->requests =
kmem_cache_create("i915_gem_request",
sizeof(struct drm_i915_gem_request), 0,
SLAB_HWCACHE_ALIGN,
NULL);
INIT_LIST_HEAD(&dev_priv->context_list);
drm/i915: Track unbound pages When dealing with a working set larger than the GATT, or even the mappable aperture when touching through the GTT, we end up with evicting objects only to rebind them at a new offset again later. Moving an object into and out of the GTT requires clflushing the pages, thus causing a double-clflush penalty for rebinding. To avoid having to clflush on rebinding, we can track the pages as they are evicted from the GTT and only relinquish those pages on memory pressure. As usual, if it were not for the handling of out-of-memory condition and having to manually shrink our own bo caches, it would be a net reduction of code. Alas. Note: The patch also contains a few changes to the last-hope evict_everything logic in i916_gem_execbuffer.c - we no longer try to only evict the purgeable stuff in a first try (since that's superflous and only helps in OOM corner-cases, not fragmented-gtt trashing situations). Also, the extraction of the get_pages retry loop from bind_to_gtt (and other callsites) to get_pages should imo have been a separate patch. v2: Ditch the newly added put_pages (for unbound objects only) in i915_gem_reset. A quick irc discussion hasn't revealed any important reason for this, so if we need this, I'd like to have a git blame'able explanation for it. v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Split out code movements and rant a bit in the commit message with a few Notes. Done v2] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20 17:40:46 +08:00
INIT_LIST_HEAD(&dev_priv->mm.unbound_list);
INIT_LIST_HEAD(&dev_priv->mm.bound_list);
INIT_LIST_HEAD(&dev_priv->mm.fence_list);
for (i = 0; i < I915_NUM_ENGINES; i++)
init_engine_lists(&dev_priv->engine[i]);
for (i = 0; i < I915_MAX_NUM_FENCES; i++)
INIT_LIST_HEAD(&dev_priv->fence_regs[i].lru_list);
INIT_DELAYED_WORK(&dev_priv->gt.retire_work,
i915_gem_retire_work_handler);
INIT_DELAYED_WORK(&dev_priv->gt.idle_work,
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-26 00:34:56 +08:00
i915_gem_idle_work_handler);
init_waitqueue_head(&dev_priv->gpu_error.wait_queue);
drm/i915: clear up wedged transitions We have two important transitions of the wedged state in the current code: - 0 -> 1: This means a hang has been detected, and signals to everyone that they please get of any locks, so that the reset work item can do its job. - 1 -> 0: The reset handler has completed. Now the last transition mixes up two states: "Reset completed and successful" and "Reset failed". To distinguish these two we do some tricks with the reset completion, but I simply could not convince myself that this doesn't race under odd circumstances. Hence split this up, and add a new terminal state indicating that the hw is gone for good. Also add explicit #defines for both states, update comments. v2: Split out the reset handling bugfix for the throttle ioctl. v3: s/tmp/wedged/ sugested by Chris Wilson. Also fixup up a rebase error which prevented this patch from actually compiling. v4: To unify the wedged state with the reset counter, keep the reset-in-progress state just as a flag. The terminally-wedged state is now denoted with a big number. v5: Add a comment to the reset_counter special values explaining that WEDGED & RESET_IN_PROGRESS needs to be true for the code to be correct. v6: Fixup logic errors introduced with the wedged+reset_counter unification. Since WEDGED implies reset-in-progress (in a way we're terminally stuck in the dead-but-reset-not-completed state), we need ensure that we check for this everywhere. The specific bug was in wait_for_error, which would simply have timed out. v7: Extract an inline i915_reset_in_progress helper to make the code more readable. Also annote the reset-in-progress case with an unlikely, to help the compiler optimize the fastpath. Do the same for the terminally wedged case with i915_terminally_wedged. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-16 00:17:22 +08:00
init_waitqueue_head(&dev_priv->gpu_error.reset_queue);
dev_priv->relative_constants_mode = I915_EXEC_CONSTANTS_REL_GENERAL;
INIT_LIST_HEAD(&dev_priv->mm.fence_list);
init_waitqueue_head(&dev_priv->pending_flip_queue);
dev_priv->mm.interruptible = true;
drm/i915: Track frontbuffer invalidation/flushing So these are the guts of the new beast. This tracks when a frontbuffer gets invalidated (due to frontbuffer rendering) and hence should be constantly scaned out, and when it's flushed again and can be compressed/one-shot-upload. Rules for flushing are simple: The frontbuffer needs one more full upload starting from the next vblank. Which means that the flushing can _only_ be called once the frontbuffer update has been latched. But this poses a problem for pageflips: We can't just delay the flushing until the pageflip is latched, since that would pose the risk that we override frontbuffer rendering that has been scheduled in-between the pageflip ioctl and the actual latching. To handle this track asynchronous invalidations (and also pageflip) state per-ring and delay any in-between flushing until the rendering has completed. And also cancel any delayed flushing if we get a new invalidation request (whether delayed or not). Also call intel_mark_fb_busy in both cases in all cases to make sure that we keep the screen at the highest refresh rate both on flips, synchronous plane updates and for frontbuffer rendering. v2: Lots of improvements Suggestions from Chris: - Move invalidate/flush in flush_*_domain and set_to_*_domain. - Drop the flush in busy_ioctl since it's redundant. Was a leftover from an earlier concept to track flips/delayed flushes. - Don't forget about the initial modeset enable/final disable. Suggested by Chris. Track flips accurately, too. Since flips complete independently of rendering we need to track pending flips in a separate mask. Again if an invalidate happens we need to cancel the evenutal flush to avoid races. v3: Provide correct header declarations for flip functions. Currently not needed outside of intel_display.c, but part of the proper interface. v4: Add proper domain management to fbcon so that the fbcon buffer is also tracked correctly. v5: Fixup locking around the fbcon set_to_gtt_domain call. v6: More comments from Chris: - Split out fbcon changes. - Drop superflous checks for potential scanout before calling intel_fb functions - we can micro-optimize this later. - s/intel_fb_/intel_fb_obj_/ to make it clear that this deals in gem object. We already have precedence for fb_obj in the pin_and_fence functions. v7: Clarify the semantics of the flip flush handling by renaming things a bit: - Don't go through a gem object but take the relevant frontbuffer bits directly. These functions center on the plane, the actual object is irrelevant - even a flip to the same object as already active should cause a flush. - Add a new intel_frontbuffer_flip for synchronous plane updates. It currently just calls intel_frontbuffer_flush since the implemenation differs. This way we achieve a clear split between one-shot update events on one side and frontbuffer rendering with potentially a very long delay between the invalidate and flush. Chris and I also had some discussions about mark_busy and whether it is appropriate to call from flush. But mark busy is a state which should be derived from the 3 events (invalidate, flush, flip) we now have by the users, like psr does by tracking relevant information in psr.busy_frontbuffer_bits. DRRS (the only real use of mark_busy for frontbuffer) needs to have similar logic. With that the overall mark_busy in the core could be removed. v8: Only when retiring gpu buffers only flush frontbuffer bits we actually invalidated in a batch. Just for safety since before any additional usage/invalidate we should always retire current rendering. Suggested by Chris Wilson. v9: Actually use intel_frontbuffer_flip in all appropriate places. Spotted by Chris. v10: Address more comments from Chris: - Don't call _flip in set_base when the crtc is inactive, avoids redunancy in the modeset case with the initial enabling of all planes. - Add comments explaining that the initial/final plane enable/disable still has work left to do before it's fully generic. v11: Only invalidate for gtt/cpu access when writing. Spotted by Chris. v12: s/_flush/_flip/ in intel_overlay.c per Chris' comment. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-19 22:01:59 +08:00
mutex_init(&dev_priv->fb_tracking.lock);
}
void i915_gem_load_cleanup(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
kmem_cache_destroy(dev_priv->requests);
kmem_cache_destroy(dev_priv->vmas);
kmem_cache_destroy(dev_priv->objects);
}
int i915_gem_freeze_late(struct drm_i915_private *dev_priv)
{
struct drm_i915_gem_object *obj;
/* Called just before we write the hibernation image.
*
* We need to update the domain tracking to reflect that the CPU
* will be accessing all the pages to create and restore from the
* hibernation, and so upon restoration those pages will be in the
* CPU domain.
*
* To make sure the hibernation image contains the latest state,
* we update that state just before writing out the image.
*/
list_for_each_entry(obj, &dev_priv->mm.unbound_list, global_list) {
obj->base.read_domains = I915_GEM_DOMAIN_CPU;
obj->base.write_domain = I915_GEM_DOMAIN_CPU;
}
list_for_each_entry(obj, &dev_priv->mm.bound_list, global_list) {
obj->base.read_domains = I915_GEM_DOMAIN_CPU;
obj->base.write_domain = I915_GEM_DOMAIN_CPU;
}
return 0;
}
void i915_gem_release(struct drm_device *dev, struct drm_file *file)
{
struct drm_i915_file_private *file_priv = file->driver_priv;
struct drm_i915_gem_request *request;
/* Clean up our request list when the client is going away, so that
* later retire_requests won't dereference our soon-to-be-gone
* file_priv.
*/
spin_lock(&file_priv->mm.lock);
list_for_each_entry(request, &file_priv->mm.request_list, client_list)
request->file_priv = NULL;
spin_unlock(&file_priv->mm.lock);
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-26 00:34:56 +08:00
if (!list_empty(&file_priv->rps.link)) {
spin_lock(&to_i915(dev)->rps.client_lock);
list_del(&file_priv->rps.link);
spin_unlock(&to_i915(dev)->rps.client_lock);
}
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-26 00:34:56 +08:00
}
int i915_gem_open(struct drm_device *dev, struct drm_file *file)
{
struct drm_i915_file_private *file_priv;
int ret;
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-26 00:34:56 +08:00
DRM_DEBUG_DRIVER("\n");
file_priv = kzalloc(sizeof(*file_priv), GFP_KERNEL);
if (!file_priv)
return -ENOMEM;
file->driver_priv = file_priv;
file_priv->dev_priv = to_i915(dev);
file_priv->file = file;
INIT_LIST_HEAD(&file_priv->rps.link);
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-26 00:34:56 +08:00
spin_lock_init(&file_priv->mm.lock);
INIT_LIST_HEAD(&file_priv->mm.request_list);
file_priv->bsd_engine = -1;
ret = i915_gem_context_open(dev, file);
if (ret)
kfree(file_priv);
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-26 00:34:56 +08:00
return ret;
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-26 00:34:56 +08:00
}
/**
* i915_gem_track_fb - update frontbuffer tracking
* @old: current GEM buffer for the frontbuffer slots
* @new: new GEM buffer for the frontbuffer slots
* @frontbuffer_bits: bitmask of frontbuffer slots
*
* This updates the frontbuffer tracking bits @frontbuffer_bits by clearing them
* from @old and setting them in @new. Both @old and @new can be NULL.
*/
drm/i915: Introduce accurate frontbuffer tracking So from just a quick look we seem to have enough information to accurately figure out whether a given gem bo is used as a frontbuffer and where exactly: We have obj->pin_count as a first check with no false negatives and only negligible false positives. And then we can just walk the modeset objects and figure out where exactly a buffer is used as scanout. Except that we can't due to locking order: If we already hold dev->struct_mutex we can't acquire any modeset locks, so could potential chase freed pointers and other evil stuff. So we need something else. For that introduce a new set of bits obj->frontbuffer_bits to track where a buffer object is used. That we can then chase without grabbing any modeset locks. Of course the consumers of this (DRRS, PSR, FBC, ...) still need to be able to do their magic both when called from modeset and from gem code. But that can be easily achieved by adding locks for these specific subsystems which always nest within either kms or gem locking. This patch just adds the relevant update code to all places. Note that if we ever support multi-planar scanout targets then we need one frontbuffer tracking bit per attachment point that we expose to userspace. v2: - Fix more oopsen. Oops. - WARN if we leak obj->frontbuffer_bits when freeing a gem buffer. Fix the bugs this brought to light. - s/update_frontbuffer_bits/update_fb_bits/. More consistent with the fb tracking functions (fb for gem object, frontbuffer for raw bits). And the function name was way too long. v3: Size obj->frontbuffer_bits correctly so that all pipes fit in. v4: Don't update fb bits in set_base on failure. Noticed by Chris. v5: s/i915_gem_update_fb_bits/i915_gem_track_fb/ Also remove a few local enum pipe variables which are now no longer needed to make the function arguments no drop over the 80 char limit. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-19 05:28:09 +08:00
void i915_gem_track_fb(struct drm_i915_gem_object *old,
struct drm_i915_gem_object *new,
unsigned frontbuffer_bits)
{
if (old) {
WARN_ON(!mutex_is_locked(&old->base.dev->struct_mutex));
WARN_ON(!(old->frontbuffer_bits & frontbuffer_bits));
old->frontbuffer_bits &= ~frontbuffer_bits;
}
if (new) {
WARN_ON(!mutex_is_locked(&new->base.dev->struct_mutex));
WARN_ON(new->frontbuffer_bits & frontbuffer_bits);
new->frontbuffer_bits |= frontbuffer_bits;
}
}
/* All the new VM stuff */
u64 i915_gem_obj_offset(struct drm_i915_gem_object *o,
struct i915_address_space *vm)
{
struct drm_i915_private *dev_priv = to_i915(o->base.dev);
struct i915_vma *vma;
WARN_ON(vm == &dev_priv->mm.aliasing_ppgtt->base);
list_for_each_entry(vma, &o->vma_list, obj_link) {
if (vma->is_ggtt &&
vma->ggtt_view.type != I915_GGTT_VIEW_NORMAL)
continue;
if (vma->vm == vm)
return vma->node.start;
}
WARN(1, "%s vma for this object not found.\n",
i915_is_ggtt(vm) ? "global" : "ppgtt");
return -1;
}
u64 i915_gem_obj_ggtt_offset_view(struct drm_i915_gem_object *o,
const struct i915_ggtt_view *view)
{
struct i915_vma *vma;
list_for_each_entry(vma, &o->vma_list, obj_link)
if (vma->is_ggtt && i915_ggtt_view_equal(&vma->ggtt_view, view))
return vma->node.start;
WARN(1, "global vma for this object not found. (view=%u)\n", view->type);
return -1;
}
bool i915_gem_obj_bound(struct drm_i915_gem_object *o,
struct i915_address_space *vm)
{
struct i915_vma *vma;
list_for_each_entry(vma, &o->vma_list, obj_link) {
if (vma->is_ggtt &&
vma->ggtt_view.type != I915_GGTT_VIEW_NORMAL)
continue;
if (vma->vm == vm && drm_mm_node_allocated(&vma->node))
return true;
}
return false;
}
bool i915_gem_obj_ggtt_bound_view(struct drm_i915_gem_object *o,
const struct i915_ggtt_view *view)
{
struct i915_vma *vma;
list_for_each_entry(vma, &o->vma_list, obj_link)
if (vma->is_ggtt &&
i915_ggtt_view_equal(&vma->ggtt_view, view) &&
drm/i915: Infrastructure for supporting different GGTT views per object Things like reliable GGTT mappings and mirrored 2d-on-3d display will need to map objects into the same address space multiple times. Added a GGTT view concept and linked it with the VMA to distinguish between multiple instances per address space. New objects and GEM functions which do not take this new view as a parameter assume the default of zero (I915_GGTT_VIEW_NORMAL) which preserves the previous behaviour. This now means that objects can have multiple VMA entries so the code which assumed there will only be one also had to be modified. Alternative GGTT views are supposed to borrow DMA addresses from obj->pages which is DMA mapped on first VMA instantiation and unmapped on the last one going away. v2: * Removed per view special casing in i915_gem_ggtt_prepare / finish_object in favour of creating and destroying DMA mappings on first VMA instantiation and last VMA destruction. (Daniel Vetter) * Simplified i915_vma_unbind which does not need to count the GGTT views. (Daniel Vetter) * Also moved obj->map_and_fenceable reset under the same check. * Checkpatch cleanups. v3: * Only retire objects once the last VMA is unbound. v4: * Keep scatter-gather table for alternative views persistent for the lifetime of the VMA. * Propagate binding errors to callers and handle appropriately. v5: * Explicitly look for normal GGTT view in i915_gem_obj_bound to align usage in i915_gem_object_ggtt_unpin. (Michel Thierry) * Change to single if statement in i915_gem_obj_to_ggtt. (Michel Thierry) * Removed stray semi-colon in i915_gem_object_set_cache_level. For: VIZ-4544 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Michel Thierry <michel.thierry@intel.com> [danvet: Drop hunk from i915_gem_shrink since it's just prettification but upsets a __must_check warning.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-11 01:27:58 +08:00
drm_mm_node_allocated(&vma->node))
return true;
return false;
}
unsigned long i915_gem_obj_ggtt_size(struct drm_i915_gem_object *o)
{
struct i915_vma *vma;
GEM_BUG_ON(list_empty(&o->vma_list));
list_for_each_entry(vma, &o->vma_list, obj_link) {
if (vma->is_ggtt &&
vma->ggtt_view.type == I915_GGTT_VIEW_NORMAL)
return vma->node.size;
}
return 0;
}
bool i915_gem_obj_is_pinned(struct drm_i915_gem_object *obj)
{
struct i915_vma *vma;
list_for_each_entry(vma, &obj->vma_list, obj_link)
if (vma->pin_count > 0)
return true;
return false;
}
drm/i915: mark GEM object pages dirty when mapped & written by the CPU In various places, a single page of a (regular) GEM object is mapped into CPU address space and updated. In each such case, either the page or the the object should be marked dirty, to ensure that the modifications are not discarded if the object is evicted under memory pressure. The typical sequence is: va = kmap_atomic(i915_gem_object_get_page(obj, pageno)); *(va+offset) = ... kunmap_atomic(va); Here we introduce i915_gem_object_get_dirty_page(), which performs the same operation as i915_gem_object_get_page() but with the side-effect of marking the returned page dirty in the pagecache. This will ensure that if the object is subsequently evicted (due to memory pressure), the changes are written to backing store rather than discarded. Note that it works only for regular (shmfs-backed) GEM objects, but (at least for now) those are the only ones that are updated in this way -- the objects in question are contexts and batchbuffers, which are always shmfs-backed. Separate patches deal with the cases where whole objects are (or may be) dirtied. v3: Mark two more pages dirty in the page-boundary-crossing cases of the execbuffer relocation code [Chris Wilson] Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1449773486-30822-2-git-send-email-david.s.gordon@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-11 02:51:23 +08:00
/* Like i915_gem_object_get_page(), but mark the returned page dirty */
struct page *
i915_gem_object_get_dirty_page(struct drm_i915_gem_object *obj, int n)
{
struct page *page;
/* Only default objects have per-page dirty tracking */
if (WARN_ON(!i915_gem_object_has_struct_page(obj)))
drm/i915: mark GEM object pages dirty when mapped & written by the CPU In various places, a single page of a (regular) GEM object is mapped into CPU address space and updated. In each such case, either the page or the the object should be marked dirty, to ensure that the modifications are not discarded if the object is evicted under memory pressure. The typical sequence is: va = kmap_atomic(i915_gem_object_get_page(obj, pageno)); *(va+offset) = ... kunmap_atomic(va); Here we introduce i915_gem_object_get_dirty_page(), which performs the same operation as i915_gem_object_get_page() but with the side-effect of marking the returned page dirty in the pagecache. This will ensure that if the object is subsequently evicted (due to memory pressure), the changes are written to backing store rather than discarded. Note that it works only for regular (shmfs-backed) GEM objects, but (at least for now) those are the only ones that are updated in this way -- the objects in question are contexts and batchbuffers, which are always shmfs-backed. Separate patches deal with the cases where whole objects are (or may be) dirtied. v3: Mark two more pages dirty in the page-boundary-crossing cases of the execbuffer relocation code [Chris Wilson] Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1449773486-30822-2-git-send-email-david.s.gordon@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-11 02:51:23 +08:00
return NULL;
page = i915_gem_object_get_page(obj, n);
set_page_dirty(page);
return page;
}
/* Allocate a new GEM object and fill it with the supplied data */
struct drm_i915_gem_object *
i915_gem_object_create_from_data(struct drm_device *dev,
const void *data, size_t size)
{
struct drm_i915_gem_object *obj;
struct sg_table *sg;
size_t bytes;
int ret;
obj = i915_gem_object_create(dev, round_up(size, PAGE_SIZE));
if (IS_ERR(obj))
return obj;
ret = i915_gem_object_set_to_cpu_domain(obj, true);
if (ret)
goto fail;
ret = i915_gem_object_get_pages(obj);
if (ret)
goto fail;
i915_gem_object_pin_pages(obj);
sg = obj->pages;
bytes = sg_copy_from_buffer(sg->sgl, sg->nents, (void *)data, size);
obj->dirty = 1; /* Backing store is now out of date */
i915_gem_object_unpin_pages(obj);
if (WARN_ON(bytes != size)) {
DRM_ERROR("Incomplete copy, wrote %zu of %zu", bytes, size);
ret = -EFAULT;
goto fail;
}
return obj;
fail:
i915_gem_object_put(obj);
return ERR_PTR(ret);
}